- sr-users - kamailio.org

Re: [Serusers] problem connecting.
by Muhammad Nuzaihan Kamalluddin 16 Jul '05

16 Jul '05

Made some progresses, using ethereal,it says Status: 483 Too Many Hops (0 bindings) Hopefully i'm making some good progress here.. Thanks, Zaihan On 13 Jul 2005, at 7:11 PM, harry gaillac wrote: > Use nathelper rtpproxy/mediaproxy in nat context > > --- Muhammad Nuzaihan Kamalluddin > <nuzaihan(a)unrealasia.net> a écrit : > > >> Hi, >> >> I have ser 0.9.3 installed on freebsd 4.10, >> everything else seems to >> work fine, except that it says host is down in the >> logs. It happens only >> after i run the softphone to test. I have port >> forwarded (the client's >> behind a NAT) but to no avail. >> >> Jul 13 14:46:05 flamejob ser[38889]: msg_send: >> ERROR: udp_send failed >> Jul 13 14:47:24 flamejob ser[38889]: ERROR: >> udp_send: >> sendto(sock,0x28411478,551,0,0x28408870,16): Host is >> down(64) >> >> and here's my ser.cfg >> >> debug=3 # debug level (cmd line: >> -dddddddddd) >> #fork=yes >> #log_stderror=no # (cmd line: -E) >> >> /* Uncomment these lines to enter debugging mode >> fork=no >> log_stderror=yes >> */ >> >> check_via=no # (cmd. line: -v) >> dns=no # (cmd. line: -r) >> rev_dns=no # (cmd. line: -R) >> port=5060 >> children=4 >> fifo="/tmp/ser_fifo" >> fifo="/tmp/ser_fifo" >> fifo_db_url="mysql://root:password@localhost/ser" >> # ------------------ module loading >> ---------------------------------- >> >> # Uncomment this if you want to use SQL database >> loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >> loadmodule "/usr/local/lib/ser/modules/sl.so" >> loadmodule "/usr/local/lib/ser/modules/tm.so" >> loadmodule "/usr/local/lib/ser/modules/rr.so" >> loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >> loadmodule "/usr/local/lib/ser/modules/usrloc.so" >> loadmodule "/usr/local/lib/ser/modules/registrar.so" >> loadmodule "/usr/local/lib/ser/modules/textops.so" >> >> # Uncomment this if you want digest authentication >> # mysql.so must be loaded ! >> loadmodule "/usr/local/lib/ser/modules/auth.so" >> loadmodule "/usr/local/lib/ser/modules/auth_db.so" >> >> # ----------------- setting module-specific >> parameters --------------- >> >> # -- usrloc params -- >> >> modparam("usrloc", "db_mode", 0) >> >> # Uncomment this if you want to use SQL database >> # for persistent storage and comment the previous >> line >> modparam("usrloc", "db_mode", 2) >> # -- auth params -- >> # Uncomment if you are using auth module >> # >> modparam("auth_db", "calculate_ha1", yes) >> # >> # If you set "calculate_ha1" parameter to yes (which >> true in this config), >> # uncomment also the following parameter) >> # >> modparam("auth_db", "password_column", "password") >> # -- rr params -- >> # add value to ;lr param to make some broken UAs >> happy >> >> >> >> Thanks, >> Zaihan >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> > > > > > > > > ______________________________________________________________________ > _____ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! > Messenger > Téléchargez cette version sur http://fr.messenger.yahoo.com >

2 3

[Serusers] Help needed with core.dumps from SER
by Ricardo Martinez 15 Jul '05

15 Jul '05

Hello list I'm having serious problems with my "production" SER machine. Since i installed "SER" program in my linux machine i have been experimenting "freezing" and "crashing" events without any particular reason. The freezing events were solved eliminating the call to the exec_dset() function from the ser.cfg file. Now i'm using avp_radius to acomplish the same function. But now instead of the "freezing" events i'm having "crashing" events every 4 or 5 days. I'm really don't know what could possibly be happening, so i discover that SER leaves a core.dumped files in my "root" directory from my linux machine. I'm not an expert in C or Linux, but i discover a basic way to check this core files using "gdb" tool. I'm not even now if i'm using the tool ok but this is the output : [root@]# gdb /usr/local/sbin/ser ../core.18662 GNU gdb Red Hat Linux (5.3post-0.20021129.18rh) Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-redhat-linux-gnu"... Core was generated by `/usr/local/sbin/ser -P /var/run/ser.pid'. Program terminated with signal 11, Segmentation fault. Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/libresolv.so.2...done. Loaded symbols for /lib/libresolv.so.2 Reading symbols from /lib/tls/libc.so.6...done. Loaded symbols for /lib/tls/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local//lib/ser/modules/mysql.so...done. Loaded symbols for /usr/local//lib/ser/modules/mysql.so Reading symbols from /usr/lib/mysql/libmysqlclient.so.10...done. Loaded symbols for /usr/lib/mysql/libmysqlclient.so.10 Reading symbols from /usr/lib/libz.so.1...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libcrypt.so.1...done. Loaded symbols for /lib/libcrypt.so.1 Reading symbols from /lib/libnsl.so.1...done. Loaded symbols for /lib/libnsl.so.1 Reading symbols from /lib/tls/libm.so.6...done. Loaded symbols for /lib/tls/libm.so.6 Reading symbols from /usr/local//lib/ser/modules/sl.so...done. Loaded symbols for /usr/local//lib/ser/modules/sl.so Reading symbols from /usr/local//lib/ser/modules/tm.so...done. Loaded symbols for /usr/local//lib/ser/modules/tm.so Reading symbols from /usr/local//lib/ser/modules/rr.so...done. Loaded symbols for /usr/local//lib/ser/modules/rr.so Reading symbols from /usr/local//lib/ser/modules/maxfwd.so...done. Loaded symbols for /usr/local//lib/ser/modules/maxfwd.so Reading symbols from /usr/local//lib/ser/modules/usrloc.so...done. Loaded symbols for /usr/local//lib/ser/modules/usrloc.so Reading symbols from /usr/local//lib/ser/modules/registrar.so...done. Loaded symbols for /usr/local//lib/ser/modules/registrar.so Reading symbols from /usr/local//lib/ser/modules/textops.so...done. Loaded symbols for /usr/local//lib/ser/modules/textops.so Reading symbols from /usr/local//lib/ser/modules/exec.so...done. Loaded symbols for /usr/local//lib/ser/modules/exec.so Reading symbols from /usr/local//lib/ser/modules/mediaproxy.so...done. Loaded symbols for /usr/local//lib/ser/modules/mediaproxy.so Reading symbols from /usr/local//lib/ser/modules/domain.so...done. Loaded symbols for /usr/local//lib/ser/modules/domain.so Reading symbols from /usr/local//lib/ser/modules/dbtext.so...done. Loaded symbols for /usr/local//lib/ser/modules/dbtext.so Reading symbols from /usr/local//lib/ser/modules/nathelper.so...done. Loaded symbols for /usr/local//lib/ser/modules/nathelper.so Reading symbols from /usr/local/lib/ser/modules/auth.so...done. Loaded symbols for /usr/local/lib/ser/modules/auth.so Reading symbols from /usr/local/lib/ser/modules/auth_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/auth_radius.so Reading symbols from /usr/local/lib/libradiusclient-ng.so.2...done. Loaded symbols for /usr/local/lib/libradiusclient-ng.so.2 Reading symbols from /usr/local/lib/ser/modules/group_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/group_radius.so Reading symbols from /usr/local/lib/ser/modules/acc.so...done. Loaded symbols for /usr/local/lib/ser/modules/acc.so Reading symbols from /usr/local/lib/ser/modules/avp_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/avp_radius.so Reading symbols from /usr/local/lib/ser/modules/avpops.so...done. Loaded symbols for /usr/local/lib/ser/modules/avpops.so Reading symbols from /usr/local/lib/ser/modules/xlog.so...done. Loaded symbols for /usr/local/lib/ser/modules/xlog.so Reading symbols from /lib/libnss_files.so.2...done. Loaded symbols for /lib/libnss_files.so.2 Reading symbols from /lib/libnss_dns.so.2...done. Loaded symbols for /lib/libnss_dns.so.2 #0 0x42070fa4 in _IO_str_overflow_internal () from /lib/tls/libc.so.6 (gdb) bt #0 0x42070fa4 in _IO_str_overflow_internal () from /lib/tls/libc.so.6 #1 0x4206fb28 in _IO_default_xsputn_internal () from /lib/tls/libc.so.6 #2 0x4204528a in vfprintf () from /lib/tls/libc.so.6 #3 0x4206432c in vsprintf () from /lib/tls/libc.so.6 #4 0x4204f18d in sprintf () from /lib/tls/libc.so.6 #5 0x4016f889 in UseMediaProxy (msg=0x8106a28, str1=0x0, str2=0x0) at mediaproxy.c:1454 #6 0x0804efe2 in do_action (a=0x8105238, msg=0x8106a28) at action.c:610 #7 0x0805079c in run_actions (a=0x8105238, msg=0x8105238) at action.c:718 #8 0x0804ef01 in do_action (a=0x8105268, msg=0x8106a28) at action.c:600 #9 0x0805079c in run_actions (a=0x8105238, msg=0x8105268) at action.c:718 #10 0x0804ef01 in do_action (a=0x8105298, msg=0x8106a28) at action.c:600 #11 0x0805079c in run_actions (a=0x8105238, msg=0x8105298) at action.c:718 #12 0x0804ed9f in do_action (a=0x8104188, msg=0x8106a28) at action.c:375 #13 0x0805079c in run_actions (a=0x8105238, msg=0x8106a28) at action.c:718 #14 0x0804ef01 in do_action (a=0x81041e8, msg=0x8106a28) at action.c:600 #15 0x0805079c in run_actions (a=0x8105238, msg=0x81041e8) at action.c:718 #16 0x0804ef01 in do_action (a=0x8104b48, msg=0x8106a28) at action.c:600 #17 0x0805079c in run_actions (a=0x8105238, msg=0x8104b48) at action.c:718 #18 0x08069449 in receive_msg ( buf=0x80c48a0 "INVITE sip:0056085603736@sipproxy.mydomain.com SIP/2.0\r\nVia: SIP/2.0/UDP 192.168.1.2:5061;branch=z9hG4bK-a10b77eb;rport\r\nFrom: 5555847148 <sip:5555847148@sipproxy.mydomain.com>;tag=802df038f5b36902o1\r"..., len=1119, rcv_info=0xbfffe350) at receive.c:165 #19 0x08079e8f in udp_rcv_loop () at udp_server.c:458 #20 0x0805b480 in main_loop () at main.c:1032 #21 0x0805c7ac in main (argc=0, argv=0x4213ad38) at main.c:1568 #22 0x42015574 in __libc_start_main () from /lib/tls/libc.so.6 >From another crash (five days ago). [root@sipvoiss root]# gdb /usr/local/sbin/ser ../core.3694 GNU gdb Red Hat Linux (5.3post-0.20021129.18rh) Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-redhat-linux-gnu"... Core was generated by `/usr/local/sbin/ser -P /var/run/ser.pid'. Program terminated with signal 11, Segmentation fault. Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/libresolv.so.2...done. Loaded symbols for /lib/libresolv.so.2 Reading symbols from /lib/tls/libc.so.6...done. Loaded symbols for /lib/tls/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local//lib/ser/modules/mysql.so...done. Loaded symbols for /usr/local//lib/ser/modules/mysql.so Reading symbols from /usr/lib/mysql/libmysqlclient.so.10...done. Loaded symbols for /usr/lib/mysql/libmysqlclient.so.10 Reading symbols from /usr/lib/libz.so.1...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libcrypt.so.1...done. Loaded symbols for /lib/libcrypt.so.1 Reading symbols from /lib/libnsl.so.1...done. Loaded symbols for /lib/libnsl.so.1 Reading symbols from /lib/tls/libm.so.6...done. Loaded symbols for /lib/tls/libm.so.6 Reading symbols from /usr/local//lib/ser/modules/permissions.so...done. Loaded symbols for /usr/local//lib/ser/modules/permissions.so Reading symbols from /usr/local//lib/ser/modules/sl.so...done. Loaded symbols for /usr/local//lib/ser/modules/sl.so Reading symbols from /usr/local//lib/ser/modules/tm.so...done. Loaded symbols for /usr/local//lib/ser/modules/tm.so Reading symbols from /usr/local//lib/ser/modules/rr.so...done. Loaded symbols for /usr/local//lib/ser/modules/rr.so Reading symbols from /usr/local//lib/ser/modules/maxfwd.so...done. Loaded symbols for /usr/local//lib/ser/modules/maxfwd.so Reading symbols from /usr/local//lib/ser/modules/usrloc.so...done. Loaded symbols for /usr/local//lib/ser/modules/usrloc.so Reading symbols from /usr/local//lib/ser/modules/registrar.so...done. Loaded symbols for /usr/local//lib/ser/modules/registrar.so Reading symbols from /usr/local//lib/ser/modules/textops.so...done. Loaded symbols for /usr/local//lib/ser/modules/textops.so Reading symbols from /usr/local//lib/ser/modules/exec.so...done. Loaded symbols for /usr/local//lib/ser/modules/exec.so Reading symbols from /usr/local//lib/ser/modules/mediaproxy.so...done. Loaded symbols for /usr/local//lib/ser/modules/mediaproxy.so Reading symbols from /usr/local//lib/ser/modules/domain.so...done. Loaded symbols for /usr/local//lib/ser/modules/domain.so Reading symbols from /usr/local//lib/ser/modules/dbtext.so...done. Loaded symbols for /usr/local//lib/ser/modules/dbtext.so Reading symbols from /usr/local//lib/ser/modules/nathelper.so...done. Loaded symbols for /usr/local//lib/ser/modules/nathelper.so Reading symbols from /usr/local/lib/ser/modules/auth.so...done. Loaded symbols for /usr/local/lib/ser/modules/auth.so Reading symbols from /usr/local/lib/ser/modules/auth_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/auth_radius.so Reading symbols from /usr/local/lib/libradiusclient-ng.so.2...done. Loaded symbols for /usr/local/lib/libradiusclient-ng.so.2 Reading symbols from /usr/local/lib/ser/modules/group_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/group_radius.so Reading symbols from /usr/local/lib/ser/modules/acc.so...done. Loaded symbols for /usr/local/lib/ser/modules/acc.so Reading symbols from /usr/local/lib/ser/modules/avp_radius.so...done. Loaded symbols for /usr/local/lib/ser/modules/avp_radius.so Reading symbols from /usr/local/lib/ser/modules/avpops.so...done. Loaded symbols for /usr/local/lib/ser/modules/avpops.so Reading symbols from /usr/local/lib/ser/modules/xlog.so...done. Loaded symbols for /usr/local/lib/ser/modules/xlog.so Reading symbols from /lib/libnss_files.so.2...done. Loaded symbols for /lib/libnss_files.so.2 Reading symbols from /lib/libnss_dns.so.2...done. Loaded symbols for /lib/libnss_dns.so.2 #0 0x42070fa4 in _IO_str_overflow_internal () from /lib/tls/libc.so.6 (gdb) (gdb) bt #0 0x42070fa4 in _IO_str_overflow_internal () from /lib/tls/libc.so.6 #1 0x4206fb28 in _IO_default_xsputn_internal () from /lib/tls/libc.so.6 #2 0x4204528a in vfprintf () from /lib/tls/libc.so.6 #3 0x4206432c in vsprintf () from /lib/tls/libc.so.6 #4 0x4204f18d in sprintf () from /lib/tls/libc.so.6 #5 0x4017b889 in UseMediaProxy (msg=0x8107178, str1=0x0, str2=0x0) at mediaproxy.c:1454 #6 0x0804efe2 in do_action (a=0x8105568, msg=0x8107178) at action.c:610 #7 0x0805079c in run_actions (a=0x8105568, msg=0x8105568) at action.c:718 #8 0x0804ef01 in do_action (a=0x8105598, msg=0x8107178) at action.c:600 #9 0x0805079c in run_actions (a=0x8105568, msg=0x8105598) at action.c:718 #10 0x0804ef01 in do_action (a=0x81055c8, msg=0x8107178) at action.c:600 #11 0x0805079c in run_actions (a=0x8105568, msg=0x81055c8) at action.c:718 #12 0x0804ed9f in do_action (a=0x81044b8, msg=0x8107178) at action.c:375 #13 0x0805079c in run_actions (a=0x8105568, msg=0x8107178) at action.c:718 #14 0x0804ef01 in do_action (a=0x8104518, msg=0x8107178) at action.c:600 #15 0x0805079c in run_actions (a=0x8105568, msg=0x8104518) at action.c:718 #16 0x0804ef01 in do_action (a=0x8104e78, msg=0x8107178) at action.c:600 #17 0x0805079c in run_actions (a=0x8105568, msg=0x8104e78) at action.c:718 #18 0x08069449 in receive_msg ( buf=0x80c48a0 "INVITE sip:5503100@sipproxy.mydomain.com SIP/2.0\r\nVia: SIP/2.0/UDP 192.168.0.2:5060;branch=z9hG4bK-4cd3c2cf;rport\r\nFrom: 5555848177 <sip:5555848177@sipproxy.mydomain.com>;tag=e9d67edee86d16dbo0\r\nTo: <"..., len=1139, rcv_info=0xbfffe650) at receive.c:165 #19 0x08079e8f in udp_rcv_loop () at udp_server.c:458 #20 0x0805b480 in main_loop () at main.c:1032 #21 0x0805c7ac in main (argc=0, argv=0x4213ad38) at main.c:1568 #22 0x42015574 in __libc_start_main () from /lib/tls/libc.so.6 Does this make sense to somone?. Can i obtain more information from the core.dumped file? For the record i'm using : [root@sipvoiss root]# uname -a Linux sipvoiss 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux [root@sipvoiss root]# more /etc/issue Red Hat Linux release 9 (Shrike) Kernel \r on an \m [root@sipvoiss root]# ser -V version: ser 0.9.3 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197 2004/12/03 19:09:31 andrei Exp $ main.c compiled on 09:52:20 Jul 7 2005 with gcc 3.2 [root@sipvoiss root]# /usr/local/mediaproxy/mediaproxy.py --version mediaproxy.py 1.3.1 I hope that someone could help me on this one. Thanks in advance Regards, Ricardo Martinez.-

1 0

Re: Re: Re: [Serusers] SEMS START ERROR: getLocalIP
by geotelcom 15 Jul '05

15 Jul '05

No : I have no more the error but nothing can not see any pid. Geo >It's ok ? >Does sems start? > >Harry > >--- geotelcom <geotelcom(a)yahoo.fr> a écrit : > >> hello >> >> Thanks for the hint >> > >> >Try in your start script to set sems -d ppp0 or >> eth0 >> > >> >--- geotelcom <geotelcom(a)yahoo.fr> a écrit : >> > >> >> Hi team, >> >> Trying to load sems, I get the error "getLocalIP >> ... >> >> Could not determine proper local address for >> media >> >> advertising !" >> >> Might be something stupid but I can not figure >> out >> >> why. Was checking sems and ser config sems.cpp >> and >> >> the archives. >> >> Anyone have an idea or a suggestion, whatever ? >> >> Thanks >> >> >> >> >> >> >> >> (720) ERROR: getLocalIP (sems.cpp:547): Could not >> >> determine proper local address for media >> advertising >> >> ! >> >> (720) ERROR: getLocalIP (sems.cpp:548): Try using >> >> 'ifconfig -a' to find a proper interface and >> >> configure >> >> >> >> Quite sure, it has already happened >> >> Debugging cpp now ! Any hint ? >> >> Thanks, G >> >> > _______________________________________________ >> >> Serusers mailing list >> >> serusers(a)lists.iptel.org >> >> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> > >> > >> > >> > >> > >> > >> >>___________________________________________________________________________ >> >Appel audio GRATUIT partout dans le monde avec le >> nouveau Yahoo! Messenger >> >Téléchargez cette version sur >> http://fr.messenger.yahoo.com >> >> >> >> >> >> >> >___________________________________________________________________________ >> Appel audio GRATUIT partout dans le monde avec le >> nouveau Yahoo! Messenger >> Téléchargez cette version sur >> http://fr.messenger.yahoo.com >> > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] sipsak, notify, sipura ata
by Gerd Feiner 15 Jul '05

15 Jul '05

hi, i know this might be the wrong list for that question, but i know there are many good people in here using ser and sipura atas. i am trying to send a NOTIFY message to a sipura ata, containing a resync request. i do this via sipsak and a textfile containing the NOTIFY message with an event of resync;tftp ... blah. i then get, as mentioned on sipura website a 401 unauthorized challenge back from the box. now i am supposed to send account password computed with md5. questions: which account password? the one for the account configured on the box? or the admin password of the box? and how do i send that to the box after the challenge arrived? don't i have to set the correct message-ids and stuff? does someone have a working example of messages and commands to get a sipura nbox to resync its profile? any help would be appreciated. Brgds, Gerd

3 4

[Serusers] FIFO DB Can't connect to remote DB server
by Juan Priotti 15 Jul '05

15 Jul '05

Hi all, I moved the mysql DB from the same server it's running ser + sems and I get this error : Jul 15 20:51:20 server2 ser[72317]: Maxfwd module- initializing Jul 15 20:51:20 server2 ser[72319]: new_connection(): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) Jul 15 20:51:20 server2 ser[72319]: db_init(): Could not create a connection Jul 15 20:51:20 server2 ser[72319]: ERROR: child_init(1): Error while connecting database Jul 15 20:51:20 server2 ser[72319]: init_mod_child(): Error while initializing module usrloc Jul 15 20:51:20 server2 ser[72319]: init_child failed I've specify the address where ser has to connect to the DB (fifo_db_url="mysql://username@password@xx.xx.xx.xx/ser"), but it still tries to connect to a local mysql Anybody knows why it happends? sems VM was working before moving the DB to another server. Thank you in advance Juan ser.cfg # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5090 #children=4 fifo="/tmp/ser_fifo" # Configure FIFO DB fifo_db_url="mysql://username@password@xx.xx.xx.xx/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/avp.so" #loadmodule "/usr/local/lib/ser/modules/avpops.so" #loadmodule "/usr/local/lib/ser/modules/avp_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { if (method=="REGISTER") { # make UAs which want to register happy sl_send_reply("200","OK"); break; }; # switch to statefull mode: if (!t_newtran()){ sl_send_reply("500","could not create transaction"); break; }; if (method=="ACK"){ # actively absorb ACKs t_relay(); break; }; # prevent timeout on the other side: t_reply("100","Trying - just wait a minute !"); if (method=="INVITE"){ # redirect the call to the 'conference' plug-in # if the URI begin with 100 if (uri=~"sip:111.*@") { # assumes that Sems configuration parameter 'socket_name=' # has been set to /tmp/am_sock if(!t_write_req("/tmp/am_fifo","conference")) { t_reply("500","error contacting sems"); }; break; }; # redirect the call to the 'announcement' plug-in # if the URI begin with 200 if (uri=~"sip:222.*@") { if(!t_write_req("/tmp/am_fifo","announcement")) { t_reply("500","error contacting sems"); }; break; }; # no service number, redirect to voicemail. # do not forget to load AVPs so that voicemail gets the # callee's email address. #load_avp("r_uri","email",0); if(!t_write_req("/tmp/am_fifo","voicemail")) { t_reply("500","error contacting sems"); }; break; } else if (method=="BYE" || method=="CANCEL") { # Sems should already know which plug-in is handling that # call. "bye" is no plug-in name. It is a reserved name which # tells Sems to terminate the call. if(!t_write_req("/tmp/am_fifo","bye")) { t_reply("500","error contacting sems"); }; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }

1 0

[Serusers] Re: GettingStarted Issue04
by Dave 15 Jul '05

15 Jul '05

Hi, I am trying to understand the section 5.1.1 (mediaproxy ser.cfg analysis) and I am having trouble understanding RE-INVITES and loose-routing: Consider following scenario: UA1 - SER -- P2 - UA2 1) When SER gets a REINVITE from UA1, what happens? How does SER know it is a REINVITE? Does it work as follows: When SER gets a REINVITE, it checks it's memory to see if an existing TransactionID exists and if yes, then it know that this is a REINVITE? Even if it knows it is a REINVITE, what role does loose_route() play? 2) WHY does the line 85 on page 40 say "n order to ensure that we are dealing only with an actual re-INVITE, we must make sure the has_totag() function returns TRUE and loose_route() is also TRUE." Why would the REINVITE have a to_tag()? Why must the loose_route return TRUE for RE-INVITES? Won't REINVITES be also record_routed() before reaching the loose_route() directive? ANy explanations will be appreciated. Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Re: [Serusers] SEMS START ERROR: getLocalIP
by geotelcom 15 Jul '05

15 Jul '05

Hi team, Trying to load sems, I get the error "getLocalIP ... Could not determine proper local address for media advertising !" Might be something stupid but I can not figure out why. Was checking sems and ser config sems.cpp and the archives. Anyone have an idea or a suggestion, whatever ? Thanks (720) ERROR: getLocalIP (sems.cpp:547): Could not determine proper local address for media advertising ! (720) ERROR: getLocalIP (sems.cpp:548): Try using 'ifconfig -a' to find a proper interface and configure Quite sure, it has already happened Debugging cpp now ! Any hint ? Thanks, G

1 0

Re: [Serusers] SEMS START ERROR: getLocalIP
by geotelcom 15 Jul '05

15 Jul '05

Hi team, Trying to load sems, I get the error "getLocalIP ... Could not determine proper local address for media advertising !" Might be something stupid but I can not figure out why. Was checking sems and ser config sems.cpp and the archives. Anyone have an idea or a suggestion, whatever ? Thanks (720) ERROR: getLocalIP (sems.cpp:547): Could not determine proper local address for media advertising ! (720) ERROR: getLocalIP (sems.cpp:548): Try using 'ifconfig -a' to find a proper interface and configure Quite sure, it has already happened Debugging cpp now ! Any hint ? Thanks, G

1 0

RE: [Serusers] Radius Auth, not sending digest User-Password
by Lucas Aimaretto 15 Jul '05

15 Jul '05

> > > auth: No User-Password or CHAP-Password attribute in the request > > > auth: Failed to validate the user. > > > > You need to use Digest Authentication in freeradius. you > > need to add > > the digest module at the authorization scheme in the > > radiusd.conf. > > > > I thought I have done it. I have allready uncommented the > digest line, but apparently there is more to it than i > thought. This is what i have in my radiusd.conf > > # The 'digest' module currently has no configuration. > # > # "Digest" authentication against a Cisco SIP server. > # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details > # on performing digest authentication for Cisco SIP servers. > # > digest { > } > Well ... it seems you did not enable it. You first need to "configure" the digest module, like you showed above. But, you need to "use" the module where ever you want. The radiusd.conf is divided ,let say, in schemes. You have a "modules" scheme, where you configure your modules, for example the digest module. Once you configured your modules, you need to use them in the authorization scheme, yes?. So, if you configured your digest module but you are not using it in the authorization scheme, it will not work. Conclusion: It seems to me that you have configured your module but you are not using it. Search your radiusd.conf for the word "digest". See if you have "digest" enabled in the authorization scheme. Regards, Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.15/49 - Release Date: 14/07/2005

1 0

[Serusers] Radius Auth, not sending digest User-Password
by Dimitar Mojsovski 15 Jul '05

15 Jul '05

Hi I'm using ser-0.9.3 and freeradius-1.0.0-5 on separate hosts. The radius server works fine authenticating wireless and dial-up users and it also wroks just fine when i try to authenticate the test user from the digest file from then ser server.The problem is when a user tries to authenticate through SER, looks like ser doesen't send the User-Password attribute to the radius server. Infact the radius server says : auth: No User-Password or CHAP-Password attribute in the request auth: Failed to validate the user. -- Dimitar Mojsovski Macedonia On-Line Service Provider www.mol.com.mk

2 1

[Serusers] SIP to PSTN call failure. Please help me!
by Yiannis Martis 15 Jul '05

15 Jul '05

2 1

Re: Re: Re: [Serusers] SEMS START ERROR: getLocalIP
by harry gaillac 15 Jul '05

15 Jul '05

Fix you script to write PID USAGE: sems [options] Options: -f config_filename: sets configuration file to use -i fifo_name: path and file name of our fifo file. -o ser_fifo_name: path and file name of Ser's fifo file. -d device: sets network device for media advertising -P pid_file: write a pid file. -u uid: set user id. -g gid: set group id. -x plugin_path: root path for plugins -D log_level: sets log level (error=0, warning=1, info=2, debug=3). -E : debug mode: do not fork and log to stderr. -h : this help screen. Notes: * plug-ins are searched in plugin_path/{apps,audio}/*.so. --- geotelcom <geotelcom(a)yahoo.fr> a écrit : > No : I have no more the error but nothing can not > see any pid. > Geo > >It's ok ? > >Does sems start? > > > >Harry > > > >--- geotelcom <geotelcom(a)yahoo.fr> a écrit : > > > >> hello > >> > >> Thanks for the hint > >> > > >> >Try in your start script to set sems -d ppp0 or > >> eth0 > >> > > >> >--- geotelcom <geotelcom(a)yahoo.fr> a écrit : > >> > > >> >> Hi team, > >> >> Trying to load sems, I get the error > "getLocalIP > >> ... > >> >> Could not determine proper local address for > >> media > >> >> advertising !" > >> >> Might be something stupid but I can not figure > >> out > >> >> why. Was checking sems and ser config sems.cpp > >> and > >> >> the archives. > >> >> Anyone have an idea or a suggestion, whatever > ? > >> >> Thanks > >> >> > >> >> > >> >> > >> >> (720) ERROR: getLocalIP (sems.cpp:547): Could > not > >> >> determine proper local address for media > >> advertising > >> >> ! > >> >> (720) ERROR: getLocalIP (sems.cpp:548): Try > using > >> >> 'ifconfig -a' to find a proper interface and > >> >> configure > >> >> > >> >> Quite sure, it has already happened > >> >> Debugging cpp now ! Any hint ? > >> >> Thanks, G > >> >> > > _______________________________________________ > >> >> Serusers mailing list > >> >> serusers(a)lists.iptel.org > >> >> > http://lists.iptel.org/mailman/listinfo/serusers > >> >> > >> > > >> > > >> > > >> > > >> > > >> > > >> > >>___________________________________________________________________________ > >> >Appel audio GRATUIT partout dans le monde avec > le > >> nouveau Yahoo! Messenger > >> >Téléchargez cette version sur > >> http://fr.messenger.yahoo.com > >> > >> > >> > >> > >> > >> > >> > >___________________________________________________________________________ > >> Appel audio GRATUIT partout dans le monde avec le > >> nouveau Yahoo! Messenger > >> Téléchargez cette version sur > >> http://fr.messenger.yahoo.com > >> > > > > > > > > > > > > > >___________________________________________________________________________ > >Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > >Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > Téléchargez cette version sur > http://fr.messenger.yahoo.com > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

Re: Re: [Serusers] SEMS START ERROR: getLocalIP
by harry gaillac 15 Jul '05

15 Jul '05

It's ok ? Does sems start? Harry --- geotelcom <geotelcom(a)yahoo.fr> a écrit : > hello > > Thanks for the hint > > > >Try in your start script to set sems -d ppp0 or > eth0 > > > >--- geotelcom <geotelcom(a)yahoo.fr> a écrit : > > > >> Hi team, > >> Trying to load sems, I get the error "getLocalIP > ... > >> Could not determine proper local address for > media > >> advertising !" > >> Might be something stupid but I can not figure > out > >> why. Was checking sems and ser config sems.cpp > and > >> the archives. > >> Anyone have an idea or a suggestion, whatever ? > >> Thanks > >> > >> > >> > >> (720) ERROR: getLocalIP (sems.cpp:547): Could not > >> determine proper local address for media > advertising > >> ! > >> (720) ERROR: getLocalIP (sems.cpp:548): Try using > >> 'ifconfig -a' to find a proper interface and > >> configure > >> > >> Quite sure, it has already happened > >> Debugging cpp now ! Any hint ? > >> Thanks, G > >> > _______________________________________________ > >> Serusers mailing list > >> serusers(a)lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > >> > > > > > > > > > > > > > >___________________________________________________________________________ > >Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > >Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > Téléchargez cette version sur > http://fr.messenger.yahoo.com > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Your contact info
by Olivier Taylor 15 Jul '05

15 Jul '05

serusers(a)lists.iptel.org, I'm updating my address book. Please take a moment to update your latest contact information. Your information is stored in my personal address book and will not be shared with anyone else. Plaxo is free, if you'd like to give it a try. Click the following link to correct or confirm your information: https://www.plaxo.com/edit_contact_info?r=21475503789-37468989-491759731 Name: serusers(a)lists.iptel.org Job Title: Company: Work E-mail: serusers(a)lists.iptel.org Work Phone: Work Fax: Work Address Line 1: Work Address Line 2: Work City, State, Zip: Mobile Phone: Home E-mail: Home Phone: Home Fax: Home Address Line 1: Home Address Line 2: Home City, State, Zip: Birthday: P.S. I've included my Plaxo card below so that you have my current information. I've also attached a copy as a vCard. +----------------- | Olivier Taylor | olivier.taylor(a)geomatics.be | | Geomatics | 19 avenue du vivier d'oie | 1000 Bruxelles | work: +32 2 320 06 16 | mobile: +32 495 28 33 61 +------------------------------------- ____________________________________________________________ This message was sent to you by olivier.taylor(a)gmail.com via Plaxo. To opt out: https://www.plaxo.com/opt_out?r=21475503789-37468989-491759731 Plaxo's Privacy Policy: http://www.plaxo.com/support/privacy

1 0

[Serusers] Shutdown handling of SER
by Andreas Granig 15 Jul '05

15 Jul '05

Hi, I'm just curious about the way SER performs a shutdown. Is there a graceful shutdown handling? If so, what exactly is done? IMHO a nice way would be to stop accepting new transactions (rejecting them with 301 for example to allow them to be resend to another server) but still accepting messages corresponding to ongoing transactions like 100/180/200 responses and ACK requests. If there are no more incomplete transactions, the socket could be closed and the process could shut down. Comments? Andy

2 2

[Serusers] (no subject)
by luca vespa 15 Jul '05

15 Jul '05

hi mine is simple question! i did't want disturb anyone! i only asked if someone can give me some examlple. i'm did a stage, i'm a student and i haven't experience of ser or of the opensource world. Best regards _________________________________________________________________ Ricerche online più semplici e veloci con MSN Toolbar! http://toolbar.msn.it/

2 1

[Serusers] *** instant messaging
by luca vespa 15 Jul '05

15 Jul '05

hi it's possible use asterix for instant message? how do i must configure it? thanks luca _________________________________________________________________ Personalizza MSN Messenger con sfondi e fotografie! http://www.ilovemessenger.msn.it/

3 4

[Serusers] SEMS START ERROR: getLocalIP
by geotelcom 15 Jul '05

15 Jul '05

(720) ERROR: getLocalIP (sems.cpp:547): Could not determine proper local address for media advertising ! (720) ERROR: getLocalIP (sems.cpp:548): Try using 'ifconfig -a' to find a proper interface and configure Quite sure, it has already happened Debugging cpp now ! Any hint ? Thanks, G

1 0

[Serusers] Harry
by harry gaillac 14 Jul '05

14 Jul '05

Hello, I might offend some people the day when i say "Serweb is a big shit". If most of users of serusers(a)lists.iptel.org sems(a)lists.iptel.org serweb-users(a)lists.iptel.org think I 'm tedious you just have to tell me and i will go away. You needn't to blacklist me ! Regards Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

2 1

[Serusers] Problem with ser_mysql.sh (was libmysql)
by Juan 14 Jul '05

14 Jul '05

Hi. Finally I uninstalled mysql 3.23.58 and installed ver 4.1.12-standard-log. Now when I trry to run ser_mysql.sh I get /ysr/local/sbin/ser_mysql.sh: line 89: mysql: command not found. How can I tell CMD= that it is at /usr/local/mysql/bin ? tnks Juan

2 4

Tr: [Serweb-users] Tr: [Serusers] SER+SERWEB
by harry gaillac 14 Jul '05

14 Jul '05

Remarque : message transféré en pièce jointe. ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Re: LCR Capabilities Patch
by Andreas Granig 14 Jul '05

14 Jul '05

Brett Nemeroff wrote: > Andreas Granig wrote: >> I guess it doesn't work without the patch too, does it? Can you send >> the full SIP message which causes this error? Just wondering if "ARG0" >> is part of the R-URI or if it's debug output of SER (which is not the >> case for my CVS version here, which is 0.9.1 from Apr. 30 2005). Which >> SER version are you using? >> > Hey, thanks for writing me back. Your structures didn't appear to exist > in my lcr_mod.c file and the patch applied just fine. > Let me know if this helps.. > > Version: > hstngw2 modules # /var/lib/ser/sbin/ser -V > version: ser 0.10.99-dev5 (i386/linux) Well, the patch has never been tested for 0.10.99, it was written for Juha's 0.9-backport, for which it works great for millions of calls so far (at least for me ;o) ) Francesco Botta reported some problems with RPID-Header after updating SER in April, but I don't know his current status. I'll take some time to port the patch to CVS-HEAD next week though. Andy

1 0

[Serusers] Complex routing
by andrew matthews 14 Jul '05

14 Jul '05

I'm looking for a way to look up a phone number and then prepending a prefix to the number then forwarding it to a host... Basicly something like this result=exec('/home/scripts/lookup.pl 800-555-1212') if(result) # Lookup failed, assume that this is a phonenumber URL until I setup pattern matching # Send to the TNT xlog("L_INFO", "Sending URI (%ru) to TNT"); prefix(result); rewritehostport("10.1.1.5:5060 <http://10.1.1.5:5060>") }; basicly then result would contain 333, or 555, or 777. Depending on then number that was returned from lookup.pl is there anyway to do this? Or any other way to do it? Thanks Andrew

2 1

[Serusers] Failed to load mysql module - undefined symbol: fm_alloc
by Naresh Parmar 14 Jul '05

14 Jul '05

Hi experts, I am unable to load the mysql module while starting up the SER. Have built the SER from the sources and using SER 0.9.3. The ser.cfg file is below: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" And I am getting the following error Jul 14 13:39:00 proxy ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: /usr/local/lib/ser/modules/mysql.so: undefined symbol: fm_malloc Jul 14 13:39:00 proxy ser: parse error (31,13-14): failed to load module Any clue?? Best Regards, Naresh --------------------------------- Yahoo! Mail Stay connected, organized, and protected. Take the tour

1 0

[Serusers] sipsak
by Sebastian Kühner 14 Jul '05

14 Jul '05

Hello, I want to send a SIP message with sipsak to ser (running on the same server!!). I do it with: sipsak -s sip:192.168.1.222:5061 -f file.txt But the message doesn't reach the ser-server. If I send it with sipsak -s sip:localhost:5061 -f file.txt ...the message reaches the server, but with the error message: CRITICAL: invalid sendtoparameters one possible reason is the server is bound to localhost and attempts to send to the net 10(3681) msg_send: ERROR: udp_send failed 10(3681) ERROR: t_forward_nonack: sending request failed Does anybode know what could be the reason? Thanks! Sebastian

1 0

[Users] Migration to pseudo-variables completed
by Bogdan-Andrei Iancu 14 Jul '05

14 Jul '05

Hi folks, All module (acc,avpops,tm,xlog) that were using pseudo-variables like support are finally migrated to a common pseudo-variable core (located in OpenSER core). Advantages: consistency across current and future modules (only one definition scheme) gets red of code duplicity (easy to maintain and to fix) scalability - new pseudo-variables will be automatically seen from all modules without any additional changes I know that this migration broke a lot of compatibilities and will force user to re-acustome the new pseudo-variables notacion, but this was a necessary step. All the README/online-docs were update in order to give as much help as possible to users to adapt. For a list with supported pseudo-variables see http://www.openser.org/docs/pseudo-variables.html. If you have ideas for new useful variables to be added, let us know. regards, bogdan

1 0

[Serusers] SER config question
by Dariusz Dwornikowski 14 Jul '05

14 Jul '05

Hi. how can i check in ser.cfg if the message is incoming or outgoing ?

2 1

Re: [Serusers] avpops in route[??] or failure_route[??]
by Greger V. Teigre 14 Jul '05

14 Jul '05

Please copy serusers. Use debug=7, fork=no and log_stderror=yes Start ser with: ser You should get debug statements from avpops. g-) ---- Original Message ---- From: Ramin NIkaeen To: Greger V. Teigre Sent: Thursday, July 14, 2005 03:59 PM Subject: RE: [Serusers] avpops in route[??] or failure_route[??] > Hi Greger, > > Thanks for your kind reply. > > How does avpops module give me output?! > > I have set the following in the ser.cfg file: > debug=3 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=yes # (cmd line: -E) > but don't get any specific output from avpops?! > > I have also tried avp_print but it does not seem to work?! > > Any ideas? > > Thanks > > ramin > > > -----Original Message----- > From: Greger V. Teigre [mailto:greger@teigre.com] > Sent: Thursday, July 14, 2005 1:37 AM > To: Ramin NIkaeen; Serusers > Subject: Re: [Serusers] avpops in route[??] or failure_route[??] > > Ramin, > avpops works pretty much everywhere. Try starting ser in debugging > mode. You will get output from the avpops module on what happens. It > can be difficult to get all the options for the different functions > correctly sometimes... > g-) > > ---- Original Message ---- > From: Ramin Nikaeen > To: Serusers > Sent: Wednesday, July 13, 2005 10:40 PM > Subject: [Serusers] avpops in route[??] or failure_route[??] > >> Valued Colleagues, >> >> Can anyone tell me of avpops can be used within routing and >> failure_route blocks?! >> >> If it can not be used, what can I use instead? >> >> My usr_preferences table in the database contains: >> >> mysql> select * from usr_preferences where uuid='6474383000' order by >> uuid, attribute; >> +------------+------------+--------------+--------------+-----------------------------+------+----------------+ >>> uuid | username | domain | attribute | value >>>> type | modified | >>>> >>>> +------------+------------+--------------+--------------+-----------------------------+------+----------------+ >>>> 6474383000 | 6474383000 | goldline.net | findme1-ring | 20 0 | >>>> 20050712155359 | 6474383000 | 6474383000 | goldline.net | >>> findme1-uri | sip:4168491076@xxxxxxxx.xxx | 0 | 20050712155359 | >> +------------+------------+--------------+--------------+-----------------------------+------+----------------+ >> I run the code attached at the bottom. Because the table is populated >> properly, >> it should print >> >> "---------ser.cfg - route[11]: inv_timeout: 20!" >> >> but it prints: >> >> "---------ser.cfg - route[11]: default inv_timeout: 20!" >> >> which indicates to me that avp_db_load is not working properly. >> >> Thanks >> >> ramin >> >> route[11] >> { >> if (avp_db_load("$ruri/username", "s:findme1-ring")) >> { >> log(3, "---------ser.cfg - route[11]:: >> FindMe: s:findme1-ring read from database\n"); >> }; >> else >> if (avp_check("s:findme1-ring", "eq/20/i")) >> { >> avp_write("i:20", "inv_timeout"); >> log(3, "---------ser.cfg - route[11]: >> inv_timeout: 20!\n"); >> } >> else >> { >> avp_write("i:20", "inv_timeout"); >> log(3, "---------ser.cfg - route[11]: default >> inv_timeout: 20!\n"); >> } >> >> } >> >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] libmysql
by Juan 14 Jul '05

14 Jul '05

I have SER 0.9.3 and also MySQL 3.23.58 running in a FC3 box. When I uncommented ser.cfg for using mysql database I am getting: ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: canot open shared object file: No such file or directory. This file isn't anywhere in my machine. May be I don't have the mysql client installed or running? How can I get this file? Thanks Juan

4 4

[Serusers] SER+SERWEB
by harry gaillac 14 Jul '05

14 Jul '05

hello, according to method.get_missed_calls.php script (serweb) how can we set username and domaine in tables aliases and missed_calls in order to display missed call from serweb? I set failure route for unavailable users # -- tm params -- modparam("tm", "fr_inv_timer", 15) modparam("tm", "fr_timer", 10) t_on_failure("1"); in block for messages INVITE failure_route[1] { ########################## # Voicemail Handler # ########################## # revert_uri(); # resend to voicemail with original request URI rewritehostport("80.119.:10.595040"); } ////////////////////////////////////////////////////// from: method.get_missed_calls.php $q="(SELECT t1.from_uri, t1.sip_from, t1.time, t1.sip_status ". "FROM ".$config->data_sql->table_missed_calls." t1 ". "WHERE t1.username='".$user->uname."' and t1.domain='".$user->domain."' ) ". "UNION ". "(SELECT t1.from_uri, t1.sip_from, t1.time, t1.sip_status ". "FROM ".$config->data_sql->table_missed_calls." t1, ".$config->data_sql->table_aliases." t2 ". "WHERE 'sip:".$user->uname."@".$user->domain."'". "=t2.contact AND t2.username=t1.username AND t2.domain=t1.domain ) ". "ORDER BY time DESC ". "limit ".$this->get_act_row().", ".$this->get_showed_rows( } /////////////////////////////////////////////////////// Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Setting tm module parameter "fr_inv_timer_avp" more than once during a call
by reticent 14 Jul '05

14 Jul '05

It seems that setting the "fr_inv_timer_avp" parameter more than once during a call is not possible. However there is a situation where this is necessary: 1. VoIP ATA to VoIP ATA call with call forwarding where call forwarded number is a PSTN destination To facilitate Call Forward No Answer, the fr_inv_timer_avp is used and set to a value (say 12 seconds), after this timer hits a failure_block is run, in this failure block i rewrite the destination and check if this destination is a PSTN number. If it is than I would like to change the fr_inv_timer_avp parameter to somthing higher due to the nature of PSTN termination but it does not seem to have any effect. Has anyone experienced this problem and possible found a workaround? Or maybe this is a known issue tavis

2 1

[Serusers] Error in restarting SER after a successful first start and addition of a user using SERCTL tool
by Singh, Amit 14 Jul '05

14 Jul '05

Hi, I tried to turn on authetication in SER. I was able to add a new user to the subscriber table using serctl utility, but when I restarted the server, after adding the user, I am getting the following error: ======================================================================== ========================== SERVER LOG AND THE SERVER WONT START ======================================================================== ========================== 0(0) get_connection(): Connection not found in the pool 0(0) new_connection(): Access denied for user: 'ser@localhost' (Using password: YES) 0(0) db_init(): Could not create a connection 0(0) register_udomain(): Can not open database connection 0(0) domain_fixup(): Error while registering domain ERROR: error ffffffff while trying to fix configuration 0(0) DEBUG: tm_shutdown : start 0(0) DEBUG: unlink_timer_lists : emptying DELETE list 0(0) DEBUG: tm_shutdown : emptying hash table 0(0) DEBUG: tm_shutdown : releasing timers 0(0) DEBUG: tm_shutdown : removing semaphores 0(0) DEBUG: tm_shutdown : destroying tmcb lists 0(0) DEBUG: tm_shutdown : done 0(5165) shm_mem_destroy 0(5165) destroying the shared memory lock when I connect to the database directly using mysql, I can connect without any hassle. Now, I am not sure, whether it is the domain_fixup() which is causing problems or the error where it cannot connect to the database. But SER did start the first time I tried, and I was able to add a user. Can someone point me out, what is going wrong and needs to be fixed? ======================================================================== ========================== ADDED A USER BEFORE ======================================================================== ========================== [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: ERROR 1045: Access denied for user: 'ser@localhost' (Using password: YES) introducing a new user to the database failed ERROR 1045: Access denied for user: 'ser@localhost' (Using password: YES) introducing a new user into uri table failed [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: new user added new user into uri table added [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: user already exists [root@sip-ex-rtr root]# serctl add root2 root2 root2(a)ser.com MySql password: [root@sip-ex-rtr root]# /usr/local/sbin/serctl: line 333: /tmp/ser_fifo: Interrupted system call ======================================================================== ========================== CONFIGURATION FILE ======================================================================== ========================== # # $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=10 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/pa.so" /*loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" */ # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "db_url","sql://ser:ser@localhost/ser") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("pa", "new_tuple_on_publish", 1) #modparam("pa", "pa_domain", "orka.dhs.org") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("ser.com", "subscriber")) { www_challenge("ser.com", "0"); break; }; save("location"); break; }; if (method=="SUBSCRIBE") { if (t_newtran()) { handle_subscription("registrar"); }; break; }; # if (method=="PUBLISH") { # if (t_newtran()) { # handle_publish("registrar"); # }; # break; # }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com

2 1

[Users] new features for avpops
by Elena Ramona Modroiu 14 Jul '05

14 Jul '05

Hi, avpops module in the CVS head has several new features: *** A new function is now available to perform integer operations with avps: avp_op("source/destination", "operator/value/flags") the result of this function is the evaluation of the expression: 'destination' = 'source' 'operator' 'value'. If the 'destination' is not specified, then a new avp having the name and type of 'source' will be created. The flags are: - d - delete the source after the operation - g - apply the operation to all 'source' avp the 'value' must be an integer in the form of "i:integer_number" or an avp alias. 'source' and 'destination' can be specified as avp name or avp alias. The operations that can be performed: - add - addition - sub - substitution - mul - multiplication - div - division - mod - module - and - bitwise and - or - bitwise or - xor - bitwise xor - not - bitwise not *** avp_copy() can now perform cast operations. Two new flags were added - n - convert the value of source avp into integer number and store it in destination - s - convert the value of source avp into string and store it in destination *** avp_check() has now more check operators - ne - not equal - le - least or equal - ge - greater or equal - and - bitwise and - or -bitwise or - xor - bitwise xor See the readme for a few more information, the avpops tutorial will be updated for openser soon. Some internals were changed to allow these new features, so testing and feedback will be highly appreciated. Regards, Ramona

3 2

[Serusers] numbers of registration allowed by SER for every username
by Chia Huey Lim 14 Jul '05

14 Jul '05

Hi.. Can we specify the numbers of registration allowed by SER for every username, or there is a cut off point by default? Thanks. Regards, Chia

1 0

[Serusers] avpops in route[??] or failure_route[??]
by Ramin Nikaeen 14 Jul '05

14 Jul '05

Valued Colleagues, Can anyone tell me of avpops can be used within routing and failure_route blocks?! If it can not be used, what can I use instead? My usr_preferences table in the database contains: mysql> select * from usr_preferences where uuid='6474383000' order by uuid, attribute; +------------+------------+--------------+--------------+--------------- --------------+------+----------------+ | uuid | username | domain | attribute | value | type | modified | +------------+------------+--------------+--------------+--------------- --------------+------+----------------+ | 6474383000 | 6474383000 | goldline.net | findme1-ring | 20 | 0 | 20050712155359 | | 6474383000 | 6474383000 | goldline.net | findme1-uri | sip:4168491076@xxxxxxxx.xxx | 0 | 20050712155359 | +------------+------------+--------------+--------------+--------------- --------------+------+----------------+ I run the code attached at the bottom. Because the table is populated properly, it should print "---------ser.cfg - route[11]: inv_timeout: 20!" but it prints: "---------ser.cfg - route[11]: default inv_timeout: 20!" which indicates to me that avp_db_load is not working properly. Thanks ramin route[11] { if (avp_db_load("$ruri/username", "s:findme1-ring")) { log(3, "---------ser.cfg - route[11]:: FindMe: s:findme1-ring read from database\n"); }; else if (avp_check("s:findme1-ring", "eq/20/i")) { avp_write("i:20", "inv_timeout"); log(3, "---------ser.cfg - route[11]: inv_timeout: 20!\n"); } else { avp_write("i:20", "inv_timeout"); log(3, "---------ser.cfg - route[11]: default inv_timeout: 20!\n"); } }

3 2

[Serusers] make calls without registration
by Dave 14 Jul '05

14 Jul '05

Hello, Is it possible to allow an UA to make calls without it registering itself? IN other words, I disable registration on the phone and enter the correct proxy info. Now when UA makes call, the INVITE goes to SER. Can SER extract the contact info from the INVITE and then upon detecting that the "user is not registered" simply register the contact info? Thanks Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 4

[Serusers] [cycle #: 4; if constant make sure server lives and fifo is on]
by fedora＠voice.dyndns.tv 14 Jul '05

14 Jul '05

[cycle #: 4; if constant make sure server lives and fifo is on] Server: Sip EXpress router (0.9.3 (i386/linux)) Now: Thu Jul 14 12:12:01 2005 Up Since: Thu Jul 14 05:20:33 2005 Up time: 24688 [sec] Transaction Statistics Current: 0 (1 waiting) Total: 30 (0 local) Replied localy: 119 Completion status 6xx: 0, 5xx: 0, 4xx: 6, 3xx: 0,2xx: 87 Stateless Server Statistics 200: 245 202: 0 2xx: 0 300: 0 301: 0 302: 0 3xx: 0 400: 0 401: 89 403: 0 404: 18 407: 0 408: 0 483: 0 4xx: 0 500: 0 5xx: 0 6xx: 0 xxx: 0 failures: 54 UsrLoc Stats Domain Registered Expired 'aliases' 41 0 'location' 5 3

1 0

[Serusers] Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/ser-0.9.3-root
by fedora＠voice.dyndns.tv 14 Jul '05

14 Jul '05

Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/ser-0.9.3-root 書き込み中: /usr/src/redhat/SRPMS/ser-0.9.3-fc1.0.src.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-mysql-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-jabber-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-radius-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-cpl-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-pa-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-postgres-0.9.3-fc1.0.i386.rpm 書き込み中: /usr/src/redhat/RPMS/i386/ser-debuginfo-0.9.3-fc1.0.i386.rpm

1 0

[Serusers] Cisco phone 7940 / 7960 firmware 7.3, 7.4, 7.5
by davis 14 Jul '05

14 Jul '05

Cisco firmware 7.5 just came out, if anyone need this go ahead and go to here http://www.optifone.com/forum in there you should find firmware 7.3, 7.4, and 7.5, also help with asterisk and iptel stuff. Let me know.

1 0

[Serusers] Instant Messege
by Kong 14 Jul '05

14 Jul '05

How can i set ser.cfg so that i can send IM from serweb to UA? (SJPhone, Xlite, Windows Messenger) is there any ser.cfg with IM enable example where i can refer to? thank you.

1 0

Re : [Serusers] Linux VoIP Server LiveCD
by Ozan Blotter 14 Jul '05

14 Jul '05

Dear Seong, I've tried to see their product before and as same they always gave short replies like "no, you can't" or "no, it's impossible", i just wanted to be sure to see what i can get and look how it looks and change into my needs. There's no evaluation or demo on how you can operate with it. May be you can have a look at the projects: http://sourceforge.net/projects/asteriskathome/ you get an asterisk box working within one hour. http://openser.org/pub/openser/latest/packages/ you can get RPMs for your system, so no doubt with installation. http://areski.net/areskicc-doc-v2/ you can get a real, almost perfect Calling Card Application to use with Asterisk. http://www.voip-info.org/wiki-Asterisk+at+large you can read on samples how SER and Asterisk connected. The last link i'm still experiencing some problems to place everything in same machine but i think people in lists can help you as i get many help from them :) Thanks, Ozan Date: Wed, 13 Jul 2005 21:55:49 +0800 From: Seong bear <akhng999(a)gmail.com> Subject: [Serusers] Linux VoIP Server LiveCD To: serusers(a)lists.iptel.org Message-ID: <42D51D65.5040106(a)gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Hi all, I'm sure someone must have heard about Linux VoIP Server LiveCD http://www.wifi.com.ar/english/voip.html. By considering ROI, i planing to get one in with asterisk B2BUA solution package. I myself are really not good to build one, which could be time consume and might go wrong especially the billing part. Since the LiveCD is utilizing SER, I'm thinking to setup some asterisk servers for B2BUA and PSTN gateway purpose and integrate with it. Therefore, I would like to seek more opinions and advices from the experts. It's worth to get one or should i go for consultant help? And anyone play with it before? Thank regards kh'ng

2 1

[Serusers] Billing Party: 8800@voice.dyndns.tv
by fedora＠voice.dyndns.tv 14 Jul '05

14 Jul '05

Signalling information SIP Session: AF273FFD-B783-440C-88B2-F880F85F30BD(a)221.186.150.68 SIP Method: Invite from : SIP Status: Ok (200) DelayTime: (s) SIP From: sip:8800@voice.dyndns.tv SIP To: sip:83980admin@voice.dyndns.tv Start time (caller): 2005-07-14 05:41:17 Asia/Tokyo Start time (proxy): 2005-07-14 05:41:17 Asia/Tokyo Stop time (proxy): 2005-07-14 05:42:06 Asia/Tokyo Session duration: 00:49 SIP Proxy: 127.0.0.1 Next SIP hop: sip:admin@iptel.org Billing Party: 8800(a)voice.dyndns.tv

1 0

[Serusers] Can't send calls to PSTN gateway
by Yiannis Martis 13 Jul '05

13 Jul '05

2 1

[Serusers] *** X-lite
by luca vespa 13 Jul '05

13 Jul '05

it's possible use X-lite client with ser? someone knows the configuration of x-lite t work with ser? ser is configured in no autentication mode thank luca _________________________________________________________________ Ricerche online più semplici e veloci con MSN Toolbar! http://toolbar.msn.it/

3 2

[Serusers] Dear Example Mailbox:
by fedora＠voice.dyndns.tv 13 Jul '05

13 Jul '05

Dear Example Mailbox: Just wanted to let you know you were just left a 0:13 long message (number 22) in mailbox 1234 from "8600" <8600>, on Thursday, July 14, 2005 at 07:06:13 AM so you might want to check it when you get a chance. Thanks! --Asterisk

2 1

[Serusers] MySQL accounting SER
by GeoTel 13 Jul '05

13 Jul '05

Dear All, Loading SER no errors, but no records in my acc table, nor missed calls, .. What am I missing ? Config details: - acc.so is compiled by default with mysql as per Makefile DEFS+=-DSQL_ACC to enable SQL accounting - ser.cfg modparam("acc|uri_db", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 3) - ser -D -E Listening on udp: 10.0.0.2 [10.0.0.2]:5060 tcp: 10.0.0.2 [10.0.0.2]:5060 Aliases: tcp: localhost:5060 tcp: SIPSERver:5060 udp: localhost:5060 udp: SIPSERver:5060 SIPSERver root /root # stateless - initializing 0(0) Maxfwd module- initializing acc - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 42080 0(0) INFO: udp_init: SO_RCVBUF is finally 231808 1(3301) INFO: fifo process starting: 3301 1(3301) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... Remark, can not send any message as well 1(3301) INFO: fifo process starting: 3301 1(3301) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 5(3305) Warning: run_failure_handlers: no UAC support (0, 256) Any help ? Thanks

2 1

[Serusers] Problem integrating ser + asterisk voicemail
by Yan Yu Lim 13 Jul '05

13 Jul '05

Hi guys, I currently have a sip proxy server (sip express router) which registers the sip phones. I need to add voice mail capability, i.e. sip express router will forward all incoming calls to Asterisk if the user does not pick up the call in 15 seconds. The voicemail recording stops when the user hangs up. However, the recording does not end if the user presses the # key, i.e. it is ignoring the user input. Similarly, when the user dials 2102 to access his voice mail, Asterisk plays the prompt, but it seems to ignore all the user input keys. Please kindly advise. Regards, YY ***************************************************** Config files ------------------------------ 1) Ser --------------------- ser.cfg (SER) --------------------- # -- tm params -- # set time for which ser will be waiting for a final response; # fr_inv_timer sets value for INVITE transactions, # fr_timer for all others modparam("tm","fr_inv_timer",15) modparam("tm","fr_timer",10) if (uri==myself) { if (method=="REGISTER") { # attempt handoff to PSTN if (uri=~"^sip:9[0-9]*@magnum.test.net") { ## This assumes that the caller log(1, "Forwarding to PSTN\n"); ## is registered in our realm forward(10.10.10.3, 5060); ## Our Cisco router break; }; # retrieve voicemail # if (uri=~"^sip:2[0-9]*@magnum.test.net") { log(1, "Retrieving voicemail\n"); # redirect now! rewritehostport("202.125.25.102:5061"); append_branch(); t_relay_to_udp("202.125.25.106","5061"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; timeout occurred ... now to forward to Asterisk's voicemail service if(method == "INVITE") { t_on_failure("1"); }; }; t_relay(); # leave voicemail # failure_route[1] { log(1,"Activating voicemail!!\n"); revert_uri(); # redirect now to Asterisk (on the same machine) ! rewritehostport("202.125.25.102:5061"); append_branch(); t_relay_to_udp("202.125.25.106","5061"); } -------------------- 2) Asterisk ------------ sip.conf ------------ [general] context=test port=5061 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; ip phone 1012, registered with SER [1012] type=friend username=1012 canreinvite=no context=test mailbox=1012 host=203.125.25.106 nat=no dtmfmode=info disallow=all allow=alaw allow=ulaw ----------------------- extensions.conf ------------------------- [test] ;leave voice messages exten => 1012,1,Voicemail(u1012) exten => 1012,2,Hangup ;play voice messages exten => 2012,1,VoiceMailMain,1012 exten => 2012,2,Hangup ------------------------- voicemail.conf ------------------------ [default] 1012 => 1234, YY, ylim(a)test.net

3 2

[Serusers] SEMS ??
by Abdul Lateef 13 Jul '05

13 Jul '05

Hello, What is SEMS? Is important to include with SER? Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com ____________________________________________________ Sell on Yahoo! Auctions no fees. Bid on great items. http://auctions.yahoo.com/

5 6

[Serusers] Linux VoIP Server LiveCD
by Seong bear 13 Jul '05

13 Jul '05

Hi all, I'm sure someone must have heard about Linux VoIP Server LiveCD http://www.wifi.com.ar/english/voip.html. By considering ROI, i planing to get one in with asterisk B2BUA solution package. I myself are really not good to build one, which could be time consume and might go wrong especially the billing part. Since the LiveCD is utilizing SER, I'm thinking to setup some asterisk servers for B2BUA and PSTN gateway purpose and integrate with it. Therefore, I would like to seek more opinions and advices from the experts. It's worth to get one or should i go for consultant help? And anyone play with it before? Thank regards kh'ng

7 7

[Serusers] subscribe_fixup: pdomain name is registrar ( ito.)
by fedora＠voice.dyndns.tv 13 Jul '05

13 Jul '05

Jul 14 04:18:44 sip ser[29090]: db_url.len=35 Jul 14 04:18:45 sip ser[29090]: pa_domain=voice.dyndns.tv Jul 14 04:18:45 sip ser[29090]: pa_mod: use_db=1 db_url.s=mysql://ser:xxxxx@localhost/openser pa_domain=voice.dyndns.tv Jul 14 04:18:45 sip ser[29090]: pa_mod_init done Jul 14 04:18:45 sip ser[29090]: subscribe_fixup: pdomain name is registrar Jul 14 04:18:45 sip ser[29090]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 14 04:18:45 sip ser[29090]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 14 04:18:45 sip ser[29090]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 14 04:18:45 sip ser[29090]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 14 04:18:45 sip ser[29103]: INFO: fifo process starting: 29103 Jul 14 04:18:46 sip ser[29108]: MESSAGING: Offline messages dumped Jul 14 04:18:46 sip ser[29103]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...

1 0

[Users] Billing Stopped in Account Creation (SERWEB Like)
by Ozan Blotter 13 Jul '05

13 Jul '05

Dear List, Currently working in Billing Software for SER. The problem i've met is very interesting: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "use_domain", 1) <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< As you see above i force SER to use passwords in "password" column as plain texts. * I create some users via console by using openserctl / serctl command. * Register some ATA's to SER, no problem, auth and accounting is working perfect. * They can call each other and PSTN connectivity is fine. * I tried to code a PHP for creation/deletion/editing of users. * I managed to write values into database : "username", "domain", "password", "first_name", "last_name", "phone", "e_mail" as they come default in table, i added one more table for "address" which will be used to keep customer's address when i want to send invoices or post them something. * I can see some accounts created from PHP :) * They can register with SER, no problem. They can call to others and PSTN, no problem. Ka'Booom !!! When i look into "acc" table, i cannot see INVITEs and BYEs for customers who are created via PHP, only BYE lines written into database. I'm sure that INVITE, ACK and BYE's are written if i create a user with openserctl / serctl utility but not from PHP-created ones The difference between openserctl/serctl created ones and the PHP-created ones are : "phplib_id", "ha" and "ha1b" are empty in my examples and also "datetime_created" values are "0000-00-00 00:00:00" I do not know why caused accounting module to log only "BYE" messages and what is the solution ? btw : a very early demo for upcoming opensource billing for OpenSER / SER can be seen at http://www.intertet.net/goktar/?page=x Thanks, Ozan

1 0

[Serusers] (no subject)
by Singh, Amit 13 Jul '05

13 Jul '05

Hi, I tried to turn on authetication in SER. I was able to add a new user to the subscriber table using serctl utility, but when I restarted the server, after adding the user, I am getting the following error: ======================================================================== ========================== SERVER LOG AND THE SERVER WONT START ======================================================================== ========================== 0(0) get_connection(): Connection not found in the pool 0(0) new_connection(): Access denied for user: 'ser@localhost' (Using password: YES) 0(0) db_init(): Could not create a connection 0(0) register_udomain(): Can not open database connection 0(0) domain_fixup(): Error while registering domain ERROR: error ffffffff while trying to fix configuration 0(0) DEBUG: tm_shutdown : start 0(0) DEBUG: unlink_timer_lists : emptying DELETE list 0(0) DEBUG: tm_shutdown : emptying hash table 0(0) DEBUG: tm_shutdown : releasing timers 0(0) DEBUG: tm_shutdown : removing semaphores 0(0) DEBUG: tm_shutdown : destroying tmcb lists 0(0) DEBUG: tm_shutdown : done 0(5165) shm_mem_destroy 0(5165) destroying the shared memory lock when I connect to the database directly using mysql, I can connect without any hassle. Now, I am not sure, whether it is the domain_fixup() which is causing problems or the error where it cannot connect to the database. But SER did start the first time I tried, and I was able to add a user. Can someone point me out, what is going wrong and needs to be fixed? ======================================================================== ========================== ADDED A USER BEFORE ======================================================================== ========================== [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: ERROR 1045: Access denied for user: 'ser@localhost' (Using password: YES) introducing a new user to the database failed ERROR 1045: Access denied for user: 'ser@localhost' (Using password: YES) introducing a new user into uri table failed [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: new user added new user into uri table added [root@sip-ex-rtr root]# serctl add root root root(a)ser.com MySql password: user already exists [root@sip-ex-rtr root]# serctl add root2 root2 root2(a)ser.com MySql password: [root@sip-ex-rtr root]# /usr/local/sbin/serctl: line 333: /tmp/ser_fifo: Interrupted system call ======================================================================== ========================== CONFIGURATION FILE ======================================================================== ========================== # # $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=10 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/pa.so" /*loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" */ # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "db_url","sql://ser:ser@localhost/ser") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("pa", "new_tuple_on_publish", 1) #modparam("pa", "pa_domain", "orka.dhs.org") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("ser.com", "subscriber")) { www_challenge("ser.com", "0"); break; }; save("location"); break; }; if (method=="SUBSCRIBE") { if (t_newtran()) { handle_subscription("registrar"); }; break; }; # if (method=="PUBLISH") { # if (t_newtran()) { # handle_publish("registrar"); # }; # break; # }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } Thanks & Regards, Amit Singh Co-op Engineer Sony Ericsson Mobile Communications, 7001 Development Drive, RTP Durham, NC 27709 Ph: +1-919-472-1601 _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com

1 0

[Serusers] Broken Calls not written to Database
by Ozan Blotter 13 Jul '05

13 Jul '05

Dear List, I'm making a call to PSTN, it's okay i can talk with the other party via ATA, but suddenly i unplug power from it, and in accounting module it does not write line with BYE message so i cannot understand whether the call is finished or not. only INVITE and ACK are written, no BYE :( This may be a security hole for customers, because they talk for a long time and they may unplug their units or cut power so it does not tell SER it's over. How i can prevent this, also what i need to add as a line for telling ACC module not to write calls from 833 to 833 into database, which are free SIP2SIP calls ? Btw, a Postpaid Billing System is on the way for OpenSER built in PHP, later i will need OpenSER group's help to place it onto hosting site. Shortly it will have features: * Nothing extra from package, default MySql Database which comes with OpenSER Release is being used, * All routing is done via OpenSER's ser.cfg , * Initial Rate, Initial Time, Increment Rate, Increment Time will be user variable , * Account Creation/Deletion done in PHP , * Invoice Generation and CDR will include many variables , * Rating will be in PHP, * And everything is totaly free :) If you have ideas and/or suggestion please write back to me so i can work for it too. Reqs: OpenSER & PHP & MySql & Apache Thanks, Ozan debug=3 fork=yes log_stderror=no listen=212.XXX.104.XXX port=5060 children=4 alias=212.XXX.104.XXX dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/acc.so" #modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "use_domain", 1) modparam("domain", "db_mode", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-asymmetric-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-asymmetric-clients") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) modparam("registrar", "default_expires", 60) modparam("registrar", "min_expires", 30) modparam("registrar", "nat_flag", 6) modparam("registrar", "use_domain", 1) modparam("rr", "enable_full_lr", 1) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section and Acc section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("212.XXX.104.XXX:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); setflag(1); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (uri==myself) { if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (uri=~"^sip:0[0-9]*@*") { rewritehost("212.XXX.59.XXX"); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; if (method=="CANCEL") { route(1); break; }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:\ +0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; }

4 6

[Serusers] reading avpops variables in ser.cfg
by Ramin Nikaeen 13 Jul '05

13 Jul '05

Valued Colleagues, Can anyone tell me how I can use/read the value of an avpops variable in my ser.cfg?! For example, if my intention is to obtain a new uri value from database and rewrite the RURI using this value, would the following work properly? if (avp_db_load("$ruri/username", "s:new-uri")) { rewriteuri("s:new-uri"); }; I appreciate your kind assistance in advance ramin

2 1

Re: [Serusers] problem connecting.
by Muhammad Nuzaihan Kamalluddin 13 Jul '05

13 Jul '05

Thanks harry,Andrei for the invaluable help, it now works, however it stalls, i can see it's connecting (using debug=6) Jul 13 21:15:47 flamejob ser[60891]: Maxfwd module- initializing Jul 13 21:17:49 flamejob /kernel: p:zaihan@unrealasia.net>;tag=274205658410751719 Jul 13 21:39:01 flamejob /kernel: <118: SIP/2.0/UDP 192.168.1.6;branch=z9hG4bK315.6e6d3c66.0 Jul 13 21:39:01 flamejob /kernel: <1ealasia.net>;tag=b42c293d3b69ef4e5d7c66dde268b4d8.10cc the server is flamejob.local.net, and i'm at 192.168.0.100, i tcpdumped all the traffic, grepped flamejob.local.net (i'm not doing anything except SIP to the server).. 22:08:20.973149 IP (tos 0x0, ttl 64, id 31797, offset 0, flags [none], length: 474) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 446 22:08:21.091281 IP (tos 0x10, ttl 63, id 44187, offset 0, flags [none], length: 630) flamejob.local.net.sip > 192.168.0.100.sip: [udp sum ok] UDP, length: 602 22:08:21.322839 IP (tos 0x0, ttl 64, id 31812, offset 0, flags [none], length: 474) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 446 22:08:21.457945 IP (tos 0x10, ttl 63, id 44257, offset 0, flags [none], length: 631) flamejob.local.net.sip > 192.168.0.100.sip: [udp sum ok] UDP, length: 603 22:09:00.678502 IP (tos 0x0, ttl 64, id 31940, offset 0, flags [none], length: 363) 192.168.0.100.sip > flamejob.local.net.sip: [udp sum ok] UDP, length: 335 22:09:00.683613 IP (tos 0x10, ttl 63, id 44263, offset 0, flags [none], length: 626) On 13 Jul 2005, at 7:11 PM, harry gaillac wrote: > Use nathelper rtpproxy/mediaproxy in nat context > > --- Muhammad Nuzaihan Kamalluddin > <nuzaihan(a)unrealasia.net> a écrit : > > >> Hi, >> >> I have ser 0.9.3 installed on freebsd 4.10, >> everything else seems to >> work fine, except that it says host is down in the >> logs. It happens only >> after i run the softphone to test. I have port >> forwarded (the client's >> behind a NAT) but to no avail. >> >> Jul 13 14:46:05 flamejob ser[38889]: msg_send: >> ERROR: udp_send failed >> Jul 13 14:47:24 flamejob ser[38889]: ERROR: >> udp_send: >> sendto(sock,0x28411478,551,0,0x28408870,16): Host is >> down(64) >> >> and here's my ser.cfg >> >> debug=3 # debug level (cmd line: >> -dddddddddd) >> #fork=yes >> #log_stderror=no # (cmd line: -E) >> >> /* Uncomment these lines to enter debugging mode >> fork=no >> log_stderror=yes >> */ >> >> check_via=no # (cmd. line: -v) >> dns=no # (cmd. line: -r) >> rev_dns=no # (cmd. line: -R) >> port=5060 >> children=4 >> fifo="/tmp/ser_fifo" >> fifo="/tmp/ser_fifo" >> fifo_db_url="mysql://root:password@localhost/ser" >> # ------------------ module loading >> ---------------------------------- >> >> # Uncomment this if you want to use SQL database >> loadmodule "/usr/local/lib/ser/modules/mysql.so" >> >> loadmodule "/usr/local/lib/ser/modules/sl.so" >> loadmodule "/usr/local/lib/ser/modules/tm.so" >> loadmodule "/usr/local/lib/ser/modules/rr.so" >> loadmodule "/usr/local/lib/ser/modules/maxfwd.so" >> loadmodule "/usr/local/lib/ser/modules/usrloc.so" >> loadmodule "/usr/local/lib/ser/modules/registrar.so" >> loadmodule "/usr/local/lib/ser/modules/textops.so" >> >> # Uncomment this if you want digest authentication >> # mysql.so must be loaded ! >> loadmodule "/usr/local/lib/ser/modules/auth.so" >> loadmodule "/usr/local/lib/ser/modules/auth_db.so" >> >> # ----------------- setting module-specific >> parameters --------------- >> >> # -- usrloc params -- >> >> modparam("usrloc", "db_mode", 0) >> >> # Uncomment this if you want to use SQL database >> # for persistent storage and comment the previous >> line >> modparam("usrloc", "db_mode", 2) >> # -- auth params -- >> # Uncomment if you are using auth module >> # >> modparam("auth_db", "calculate_ha1", yes) >> # >> # If you set "calculate_ha1" parameter to yes (which >> true in this config), >> # uncomment also the following parameter) >> # >> modparam("auth_db", "password_column", "password") >> # -- rr params -- >> # add value to ;lr param to make some broken UAs >> happy >> >> >> >> Thanks, >> Zaihan >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> > > > > > > > > ______________________________________________________________________ > _____ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! > Messenger > Téléchargez cette version sur http://fr.messenger.yahoo.com >

1 0

[Serusers] Credentials problems with remote MySQl DB
by Daniel Mizrachi (net-uno.net) 13 Jul '05

13 Jul '05

Hi, I have a situation really rare with SER 0.8.14 and MySQL 4.0.11. When I run SER and MySQL in the same box a can make and receive calls without problems, but when I split the DB to another box I always receive a message that says: check_username(): Digest username and URI username match 3(15079) query="select grp from grp where username='2127701301' AND grp='local'" 3(15079) is_user_in(): User is not in group 'local' 3(15079) parse_headers: flags=-1 Running a ngrep port 3306 from SER I`d never seen a request to the DB getting out the server even though the SER application says to be executing it. (3(15079) query="select grp from grp where username='2127701301' AND grp='local'") My question: Do I have to set up anything else in ser.cfg or modified any parameter before to compile the aplication to work in diferent boxes ? Best Regards, Daniel Mizrachi

1 0

[Serusers] (no subject)
by Yiannis Martis 13 Jul '05

13 Jul '05

1 0

RE: [Serusers] IM problem.
by Kong 13 Jul '05

13 Jul '05

humm.. i fixed those problem, but still my UA can't receive any messages... test UA's are SJPhone, XLite, Window messenger. any idea on that? At 08:30 PM 7/13/2005, you wrote: >You need these lines ! > >Use ethereal for help > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > apparently that happens because of this line. > > > > if (!mf_process_maxfwd_header("16")) { > > sl_send_reply("483", "Too Many Hops !"); > > break; > > }; > > > > but if i comment it out, there is a infinite loop > > happening at the background. > > then it comeout timeout again. > > > > btw, do u have > > modparam("msilo", > > "registrar","sip:registrar@XXXXXX") > > in ur ser.cfg? > > > > At 08:18 PM 7/13/2005, you wrote: > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > Humm.. that seems to help, but now i got this > > error. > > > > > > > > 483 Too Many Hops > > > > > > > > i wonder how is that.... > > > > do i really need this line? > > > > modparam("msilo", "registrar", > > > > "sip:registrar@XXXXXX") > > > > > >according to doc not really > > > > > > > At 07:08 PM 7/13/2005, you wrote: > > > > >read > > > > http://openser.org/docs/modules/0.9.x/msilo.html > > > > > > > > > > The method stores certain parts of the > > current > > > > SIP > > > > >request (it should be called when the request > > type > > > > is > > > > >MESSAGE and the destination user is offline or > > his > > > > UA > > > > >does not support MESSAGE requests). If the user > > is > > > > >registered with a UA which does not support > > MESSAGE > > > > >requests you should not use mode="0" if you > > have > > > > >changed the request uri with the contact > > address of > > > > >user's UA. > > > > > > > > > >Meaning of the parameters is as follows: > > > > > mode - specifies what to save as R-URI. > > > > >"0" - first check if new_uri is an address of > > > > record. > > > > >If yes, then use it and store it as R-URI, > > > > otherwise > > > > >look at R-URI and, if necessary, at URI from > > "To" > > > > >header. > > > > >"1" - look first at R-URI and then at URI from > > "To" > > > > >header. > > > > >"2" - look only at URI form "To" header. > > > > > > > > > >I have to set IM I use ser/serweb 0.9.3 > > > > > > > > > >Harry > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > Tried Windows Messenger, Xlite, SJPhone, > > > > FireFly. > > > > > > > > > > > > modparam("msilo", "registrar", > > > > > > "sip:registrar@XXXXXX") > > > > > > > > > > > > am i suppose to put XXXXXX as my domain? > > > > > > > > > > > > then do i need to create any user call > > > > registrar? > > > > > > > > > > > > At 06:24 PM 7/13/2005, you wrote: > > > > > > >What is your UA ? > > > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > > > > > I am trying to implement Messaging from > > > > serweb > > > > > > to > > > > > > > > UA, but not a success. > > > > > > > > > > > > > > > > i have this script in my ser.cfg > > > > > > > > > > > > > > > > if (!lookup("location")) { > > > > > > > > if (method == "MESSAGE") { > > > > > > > > if (!t_newtran()) { > > > > > > > > sl_reply_error(); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > if (m_store("0")) { > > > > > > > > t_reply("202", "Accepted for > > Later > > > > > > > > Delivery"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > }; > > > > > > > > > > > > > > > > sl_send_reply("404", "User Not > > Found > > > > !"); > > > > > > > > break; > > > > > > > > }; > > > > > > > > > > > > > > > > but i read somewhere in google that i > > need > > > > to > > > > > > add in > > > > > > > > this line. > > > > > > > > modparam("msilo", "registrar", > > > > > > > > "sip:registrar@iptel.org") > > > > > > > > so that the UA will be notify if there > > is > > > > any > > > > > > new > > > > > > > > message. > > > > > > > > > > > > > > > > If i don't add this line, the message > > can be > > > > > > send > > > > > > > > from serweb to the > > > > > > > > account (which stored in SILO) then can > > be > > > > > > checked > > > > > > > > from the recipient > > > > > > > > serweb account. But once i add the > > registrar > > > > > > line > > > > > > > > in, the sending process > > > > > > > > return error code of 405 timeout. can i > > know > > > > > > whats > > > > > > > > the problem here? > > > > > > > > > > > > > > > > i am using ser-0.9.3 > > > > > > > > > > > > > > > > thank you. > > > > > > > > > >_______________________________________________ > > > > > > > > Serusers mailing list > > > > > > > > serusers(a)lists.iptel.org > > > > > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > > > >Appel audio GRATUIT partout dans le monde > > avec > > > > le > > > > > > nouveau Yahoo! Messenger > > > > > > >Téléchargez cette version sur > > > > > > http://fr.messenger.yahoo.com > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > >Appel audio GRATUIT partout dans le monde avec > > le > > > > nouveau Yahoo! Messenger > > > > >Téléchargez cette version sur > > > > http://fr.messenger.yahoo.com > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > >=== message truncated === > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

Re: [Serusers] SERWEB
by harry gaillac 13 Jul '05

13 Jul '05

Thanks, sql log for missed call: /////////////////////////////////////////////////////// 050713 14:23:31 340 Connect ser(a)serveur1.home.net on 340 Init DB ser 340 Init DB ser 340 Query select first_name, last_name from subscriber where (username='bob' and domain='nxs.yi.org') 340 Init DB ser 340 Query select timezone from subscriber where (username='bob' and domain='nxs.yi.org') 340 Init DB ser 340 Query SELECT count(*) FROM missed_calls t1 WHERE t1.username='bob' and t1.domain='nxs.yi.org' 340 Init DB ser 340 Query SELECT count(*) FROM missed_calls t1, aliases t2 WHERE 'sip:bob@nxs.yi.org'=t2.contact AND t2.username=t1.username AND t2.domain=t1.domain 340 Init DB ser 340 Query (select t1.from_uri as inv_to_uri, t1.sip_from as inv_sip_to, t1.sip_callid as inv_callid, t1.time as inv_time, t1.fromtag as inv_fromtag, t1.sip_status as inv_status, null as bye_to_uri, null as bye_sip_to, null as bye_callid, null as bye_time, null as bye_fromtag, null as bye_totag, null as bye_from_uri, null as bye_sip_from, null as length, t1.time as ttime , 'missed' as call_type FROM missed_calls t1 WHERE t1.username='bob' and t1.domain='nxs.yi.org' ) UNION (select t1.from_uri as inv_to_uri, t1.sip_from as inv_sip_to, t1.sip_callid as inv_callid, t1.time as inv_time, t1.fromtag as inv_fromtag, t1.sip_status as inv_status, null as bye_to_uri, null as bye_sip_to, null as bye_callid, null as bye_time, null as bye_fromtag, null as bye_totag, null as bye_from_uri, null as bye_sip_from, null as length, t1.time as ttime , 'missed' as call_type FROM missed_calls t1, aliases t2 WHERE 'sip:bob@nxs.yi.org'=t2.contact AND t2.username=t1.username AND t2.domain=t1.domain ) order by ttime desc limit 0, 20 340 Quit /////////////////////////////////////////////////////// missed_calls table: mysql> select * from missed_calls; +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ | sip_from | sip_to | sip_status | sip_method | i_uri | o_uri | from_uri | to_uri | sip_callid | username | domain | fromtag | totag | time | timestamp | +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ | "alice" <sip:alice@nxs.yi.org>;tag=C7F9FEE3-D707AE46 | <sip:84@nxs.yi.org;user=phone> | 482 Loop Detected | INVITE | sip:84@nxs.yi.org:5060;user=phone | sip:alice@192.168.0.20 | sip:alice@nxs.yi.org | sip:84@nxs.yi.org;user=phone | a75a9eaf-a34e6609-202b22c(a)192.168.0.20 | n/a | n/a | C7F9FEE3-D707AE46 | n/a | 2005-07-13 11:24:23 | 20050713132423 | +------------------------------------------------------+--------------------------------+-------------------+------------+-----------------------------------+------------------------+----------------------+------------------------------+----------------------------------------+----------+--------+-------------------+-------+---------------------+----------------+ 1 row in set (0.00 sec) Serweb reply "No missed calls" Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

RE: [Serusers] IM problem.
by Kong 13 Jul '05

13 Jul '05

apparently that happens because of this line. if (!mf_process_maxfwd_header("16")) { sl_send_reply("483", "Too Many Hops !"); break; }; but if i comment it out, there is a infinite loop happening at the background. then it comeout timeout again. btw, do u have modparam("msilo", "registrar","sip:registrar@XXXXXX") in ur ser.cfg? At 08:18 PM 7/13/2005, you wrote: >--- Kong <kongzs(a)irepublics.com> a écrit : > > > Humm.. that seems to help, but now i got this error. > > > > 483 Too Many Hops > > > > i wonder how is that.... > > do i really need this line? > > modparam("msilo", "registrar", > > "sip:registrar@XXXXXX") > >according to doc not really > > > At 07:08 PM 7/13/2005, you wrote: > > >read > > http://openser.org/docs/modules/0.9.x/msilo.html > > > > > > The method stores certain parts of the current > > SIP > > >request (it should be called when the request type > > is > > >MESSAGE and the destination user is offline or his > > UA > > >does not support MESSAGE requests). If the user is > > >registered with a UA which does not support MESSAGE > > >requests you should not use mode="0" if you have > > >changed the request uri with the contact address of > > >user's UA. > > > > > >Meaning of the parameters is as follows: > > > mode - specifies what to save as R-URI. > > >"0" - first check if new_uri is an address of > > record. > > >If yes, then use it and store it as R-URI, > > otherwise > > >look at R-URI and, if necessary, at URI from "To" > > >header. > > >"1" - look first at R-URI and then at URI from "To" > > >header. > > >"2" - look only at URI form "To" header. > > > > > >I have to set IM I use ser/serweb 0.9.3 > > > > > >Harry > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > Tried Windows Messenger, Xlite, SJPhone, > > FireFly. > > > > > > > > modparam("msilo", "registrar", > > > > "sip:registrar@XXXXXX") > > > > > > > > am i suppose to put XXXXXX as my domain? > > > > > > > > then do i need to create any user call > > registrar? > > > > > > > > At 06:24 PM 7/13/2005, you wrote: > > > > >What is your UA ? > > > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > > > > > I am trying to implement Messaging from > > serweb > > > > to > > > > > > UA, but not a success. > > > > > > > > > > > > i have this script in my ser.cfg > > > > > > > > > > > > if (!lookup("location")) { > > > > > > if (method == "MESSAGE") { > > > > > > if (!t_newtran()) { > > > > > > sl_reply_error(); > > > > > > break; > > > > > > }; > > > > > > > > > > > > if (m_store("0")) { > > > > > > t_reply("202", "Accepted for Later > > > > > > Delivery"); > > > > > > break; > > > > > > }; > > > > > > }; > > > > > > > > > > > > sl_send_reply("404", "User Not Found > > !"); > > > > > > break; > > > > > > }; > > > > > > > > > > > > but i read somewhere in google that i need > > to > > > > add in > > > > > > this line. > > > > > > modparam("msilo", "registrar", > > > > > > "sip:registrar@iptel.org") > > > > > > so that the UA will be notify if there is > > any > > > > new > > > > > > message. > > > > > > > > > > > > If i don't add this line, the message can be > > > > send > > > > > > from serweb to the > > > > > > account (which stored in SILO) then can be > > > > checked > > > > > > from the recipient > > > > > > serweb account. But once i add the registrar > > > > line > > > > > > in, the sending process > > > > > > return error code of 405 timeout. can i know > > > > whats > > > > > > the problem here? > > > > > > > > > > > > i am using ser-0.9.3 > > > > > > > > > > > > thank you. > > > > > >_______________________________________________ > > > > > > Serusers mailing list > > > > > > serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > > > >Appel audio GRATUIT partout dans le monde avec > > le > > > > nouveau Yahoo! Messenger > > > > >Téléchargez cette version sur > > > > http://fr.messenger.yahoo.com > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > >Appel audio GRATUIT partout dans le monde avec le > > nouveau Yahoo! Messenger > > >Téléchargez cette version sur > > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Users] Make calls without registering?
by Dave 13 Jul '05

13 Jul '05

Hello, Is it possible to allow an UA to make calls without it registering itself? IN other words, I disable registration on the phone and enter the correct proxy info. Now when UA makes call, the INVITE goes to SER. Can SER extract the contact info from the INVITE and then upon detecting that the "user is not registered" simply register the contact info? Thanks Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 2

RE: [Serusers] IM problem.
by Kong 13 Jul '05

13 Jul '05

Humm.. that seems to help, but now i got this error. 483 Too Many Hops i wonder how is that.... do i really need this line? modparam("msilo", "registrar", "sip:registrar@XXXXXX") At 07:08 PM 7/13/2005, you wrote: >read http://openser.org/docs/modules/0.9.x/msilo.html > > The method stores certain parts of the current SIP >request (it should be called when the request type is >MESSAGE and the destination user is offline or his UA >does not support MESSAGE requests). If the user is >registered with a UA which does not support MESSAGE >requests you should not use mode="0" if you have >changed the request uri with the contact address of >user's UA. > >Meaning of the parameters is as follows: > mode - specifies what to save as R-URI. >"0" - first check if new_uri is an address of record. >If yes, then use it and store it as R-URI, otherwise >look at R-URI and, if necessary, at URI from "To" >header. >"1" - look first at R-URI and then at URI from "To" >header. >"2" - look only at URI form "To" header. > >I have to set IM I use ser/serweb 0.9.3 > >Harry >--- Kong <kongzs(a)irepublics.com> a écrit : > > > Tried Windows Messenger, Xlite, SJPhone, FireFly. > > > > modparam("msilo", "registrar", > > "sip:registrar@XXXXXX") > > > > am i suppose to put XXXXXX as my domain? > > > > then do i need to create any user call registrar? > > > > At 06:24 PM 7/13/2005, you wrote: > > >What is your UA ? > > >--- Kong <kongzs(a)irepublics.com> a écrit : > > > > > > > I am trying to implement Messaging from serweb > > to > > > > UA, but not a success. > > > > > > > > i have this script in my ser.cfg > > > > > > > > if (!lookup("location")) { > > > > if (method == "MESSAGE") { > > > > if (!t_newtran()) { > > > > sl_reply_error(); > > > > break; > > > > }; > > > > > > > > if (m_store("0")) { > > > > t_reply("202", "Accepted for Later > > > > Delivery"); > > > > break; > > > > }; > > > > }; > > > > > > > > sl_send_reply("404", "User Not Found !"); > > > > break; > > > > }; > > > > > > > > but i read somewhere in google that i need to > > add in > > > > this line. > > > > modparam("msilo", "registrar", > > > > "sip:registrar@iptel.org") > > > > so that the UA will be notify if there is any > > new > > > > message. > > > > > > > > If i don't add this line, the message can be > > send > > > > from serweb to the > > > > account (which stored in SILO) then can be > > checked > > > > from the recipient > > > > serweb account. But once i add the registrar > > line > > > > in, the sending process > > > > return error code of 405 timeout. can i know > > whats > > > > the problem here? > > > > > > > > i am using ser-0.9.3 > > > > > > > > thank you. > > > >_______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > >___________________________________________________________________________ > > >Appel audio GRATUIT partout dans le monde avec le > > nouveau Yahoo! Messenger > > >Téléchargez cette version sur > > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] New Bee using SER
by maganti vamshi 13 Jul '05

13 Jul '05

Hi all Iam very new to this field. I would like to know how can i configure this SER. I want to use this in our Lab environment. Thank You. Regards, Dinesh. __________________________________________________________ Free antispam, antivirus and 1GB to save all your messages Only in Yahoo! Mail: http://in.mail.yahoo.com

2 1

[Serusers] problem connecting.
by Muhammad Nuzaihan Kamalluddin 13 Jul '05

13 Jul '05

Hi, I have ser 0.9.3 installed on freebsd 4.10, everything else seems to work fine, except that it says host is down in the logs. It happens only after i run the softphone to test. I have port forwarded (the client's behind a NAT) but to no avail. Jul 13 14:46:05 flamejob ser[38889]: msg_send: ERROR: udp_send failed Jul 13 14:47:24 flamejob ser[38889]: ERROR: udp_send: sendto(sock,0x28411478,551,0,0x28408870,16): Host is down(64) and here's my ser.cfg debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo="/tmp/ser_fifo" fifo_db_url="mysql://root:password@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy Thanks, Zaihan

2 1

Re: [Users] Broken Calls now written to Database
by Bogdan-Andrei Iancu 13 Jul '05

13 Jul '05

Hello Ozan, looking on the the config script you sent on the list, you just have to move the setflag(1) from the "Record Route Section and Acc section" to route[3]: if (uri=~"^sip:0[0-9]*@*") { setflag(1); # mark for acc rewritehost("212.XXX.59.XXX"); route(1); break; }; regards, bogdan Ozan Blotter wrote: > Dear Bogdan, > > Thanks for your information about this "setflag" issue but still i > have no idea which line i have to remove and move to where ?. For BYE > problems i think i can talk with Carrier to setup that for me, they're > using MERA VoIP. > > Thanks Again, > Ozan > > ps * : today or tomorrow i will let you to login/test the billing > thing since it's still a big mess with codes around.. > > > ----- Original Message ----- From: "Bogdan-Andrei Iancu" > <bogdan(a)voice-system.ro> > To: "Ozan Blotter" <cosmocid(a)ispro.net.tr> > Cc: <users(a)openser.org> > Sent: Tuesday, July 12, 2005 12:02 PM > Subject: Re: [Users] Broken Calls now written to Database > > >> Hi Ozan, >> >> first, if you want not to account SIP2SIP calls, you have just not to >> set the acc flag for those calls (flag 1 in your script). In other >> words, if you want to account only calls going to PSTN, set the flag >> 1 only if destination is PSTN. >> >> Regarding the BYE - this is an well known issue and you can solve it >> on the GW side (depending what GW you have) - you may enable on your >> GW two types of timers: >> - for received media: if the GW received no more media in X secs, >> it will generate the BYE. >> - Session Timer: periodically, the GW probes if the UAC is still >> on by sending reINVITEs - in case of no answer or negative reply, a >> BYE is generated. >> Take a look at your GW specification if it has support for this. >> >> Since the BYEs generated in this case by GW will end by timeout (the >> client being disconnected), note that you need to enable >> "failed_transaction" acc param (set it to on) in 0.9.x or set a flag >> for "failed_transaction_flag" acc param in 0.10.x (see the online doc >> for more info). >> >> For PostPaid - it's welcome - when you have a working version, please >> let us know and we can arrange with the upload. >> >> regards, >> bogdan >> >> Ozan Blotter wrote: >> >>> Dear List, >>> I'm making a call to PSTN, it's okay i can talk with the other >>> party via ATA, but suddenly i unplug power from it, and in >>> accounting module it does not write line with BYE message so i >>> cannot understand whether the call is finished or not. only INVITE >>> and ACK are written, no BYE :( >>> This may be a security hole for customers, because they talk for a >>> long time and they may unplug their units or cut power so it does >>> not tell SER it's over. How i can prevent this, also what i need to >>> add as a line for telling ACC module not to write calls from 833 to >>> 833 into database, which are free SIP2SIP calls ? >>> Btw, a Postpaid Billing System is on the way for OpenSER built in >>> PHP, later i will need OpenSER group's help to place it onto hosting >>> site. Shortly it will have features: >>> * Nothing extra from package, default MySql Database which comes >>> with OpenSER Release is being used, >>> * All routing is done via OpenSER's ser.cfg , >>> * Initial Rate, Initial Time, Increment Rate, Increment Time will be >>> user variable , >>> * Account Creation/Deletion done in PHP , >>> * Invoice Generation and CDR will include many variables , >>> * Rating will be in PHP, >>> * And everything is totaly free :) >>> If you have ideas and/or suggestion please write back to me so i >>> can work for it too. >>> Reqs: OpenSER & PHP & MySql & Apache >>> Thanks, >>> Ozan >> >> >

2 1

RE: [Serusers] IM problem.
by Kong 13 Jul '05

13 Jul '05

Tried Windows Messenger, Xlite, SJPhone, FireFly. modparam("msilo", "registrar", "sip:registrar@XXXXXX") am i suppose to put XXXXXX as my domain? then do i need to create any user call registrar? At 06:24 PM 7/13/2005, you wrote: >What is your UA ? >--- Kong <kongzs(a)irepublics.com> a écrit : > > > I am trying to implement Messaging from serweb to > > UA, but not a success. > > > > i have this script in my ser.cfg > > > > if (!lookup("location")) { > > if (method == "MESSAGE") { > > if (!t_newtran()) { > > sl_reply_error(); > > break; > > }; > > > > if (m_store("0")) { > > t_reply("202", "Accepted for Later > > Delivery"); > > break; > > }; > > }; > > > > sl_send_reply("404", "User Not Found !"); > > break; > > }; > > > > but i read somewhere in google that i need to add in > > this line. > > modparam("msilo", "registrar", > > "sip:registrar@iptel.org") > > so that the UA will be notify if there is any new > > message. > > > > If i don't add this line, the message can be send > > from serweb to the > > account (which stored in SILO) then can be checked > > from the recipient > > serweb account. But once i add the registrar line > > in, the sending process > > return error code of 405 timeout. can i know whats > > the problem here? > > > > i am using ser-0.9.3 > > > > thank you. > >_______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > >___________________________________________________________________________ >Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger >Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Fax and SIP
by Giovanni Balasso 13 Jul '05

13 Jul '05

Maybe not specific to ser, but I think this issue may be intresting to serusers... I think business voip solution would have a major added value if they could offer fax service. After some googling around it seems that fax over IP protocols (T.38) are somewhat unreliable. Ok now some loud thinking: enters SIP, and we all well know that SIP is media independent, so could I send documents instead of voice? I mean having two SIP endpoints which can transfer, say, a postscript file. Then we should build SIP fax machines which can scan documents to ps and send and receive via SIP, and as well build PSTN gateways which receive from SIP and simply pass ps data to some fax server like hylafax. Do you thik this is possible? Am I delirating? ciao -- Giovanni Balasso giaso(a)yahoo.it

2 1

[Serusers] IM problem.
by Kong 13 Jul '05

13 Jul '05

I am trying to implement Messaging from serweb to UA, but not a success. i have this script in my ser.cfg if (!lookup("location")) { if (method == "MESSAGE") { if (!t_newtran()) { sl_reply_error(); break; }; if (m_store("0")) { t_reply("202", "Accepted for Later Delivery"); break; }; }; sl_send_reply("404", "User Not Found !"); break; }; but i read somewhere in google that i need to add in this line. modparam("msilo", "registrar", "sip:registrar@iptel.org") so that the UA will be notify if there is any new message. If i don't add this line, the message can be send from serweb to the account (which stored in SILO) then can be checked from the recipient serweb account. But once i add the registrar line in, the sending process return error code of 405 timeout. can i know whats the problem here? i am using ser-0.9.3 thank you.

1 0

[Serusers] ser mysql/cache sync
by Jack Wei 13 Jul '05

13 Jul '05

i am running a cluster with 2 sers. i start the 1st ser and several users registers. the users show up in both the cache and the mysql db. then i start the 2nd ser, and it loads the db into the cache. when the cache entries in the 2nd server times out, the entries are deleted from the db. however, when the users registers in the 1st ser, they aren't entered into the db. how do i fix this problem? the db_mode is set to "2" w/ timer_interval at "10". i've even tried setting the db_mode to "1", but that didn't help. Jack Wei __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

5 8

[Serusers] Check_from() and check_to()
by Jon Mansey 12 Jul '05

12 Jul '05

Hi I seem to be having trouble with check_to() for registrations and check_from() for invites, even though I have them right after *_authorize and challenge calls. Maybe I don't fully understand the test that it does but it prevents registration from all my clients seemingly. What is the test failing on? Im getting 401 unauthorized. If I comment out the check_to() test, I register just fine. Could someone more fully explain the test criteria here so I can see where my problem is, thx. V0.9.3 Help appreciated, Jon

2 1

Re: RE: RE: [Serusers] Try install Classkit extension
by GeoTel 12 Jul '05

12 Jul '05

Thanks Gareth, As a matter of fact you don't even need that classkit.so per se if you compile php with apxs. Saying that, because I have not yum nor yamyam :-) in my OS, so I had to find out. BTW, do you have anything in server monioring or acc or missed calls when you log on user. True there are no records in DB either. Geo My classkit.so is default located in /usr/lib/php/modules I'm running Fedora Core 4, Apache 2.0.54, PHP 5.0.4. G. -----Original Message----- From: GeoTel [mailto:geotelcom@yahoo.fr] Sent: 12 July 2005 06:51 To: Gareth C. Fowler Subject: Re: RE: [Serusers] Try install Classkit extension Thanks Gareth but I did it as I say in php.ini. Could you check for me where is your "classkit.so" installed ? My is in '/var/tmp/pear-build-root/install-classkit-0.4//usr/local/lib/php/extensions/no-debug-non-zts-20041030/classkit.so' A little bid strange but no error. Hi, I had the same problem. Check your php.ini config and add the following: extension=classkit.so It worked for me! G. Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of GeoTel Sent: 12 July 2005 06:29 To: serusers(a)lists.iptel.org Subject: [Serusers] Try install Classkit extension Dear team, Still having the same problem with classkit, same error: "Function aggregate_methods() doesn't exists. "Try" install Classkit extension...." yet, pear install OK Installing '/var/tmp/pear-build-root/install-classkit-0.4//usr/local/lib/php/extensions/no-debug-non-zts-20041030/classkit.so' install ok: classkit 0.4 and "php.ini" ..................................... ; Directory in which the loadable extensions (modules) reside. extension_dir = "/usr/local/lib/php/extensions/" extension=classkit.so Any info, Thanks George

1 0

[Users] LCR module docs
by Bogdan-Andrei Iancu 12 Jul '05

12 Jul '05

Hi folks, Documentation for LCR was moved into SGML format, so the online version (html) is now available at : http://www.openser.org/docs/modules/0.10.x/lcr.html regards, bogdan

1 0

[Serusers] SER not creating PID
by Jason Hoss 12 Jul '05

12 Jul '05

I am running SER from the command line as like so: /usr/local/sbin/ser However, I cannot control it via serctl due to the fact that when it runs via that command it is not creating a PID. Is this symtomatic of the way I am running it or is there something wrong with the code causing it not to write out a PID file. I have searched for ser.pid on my system and it is not there (was just making sure that serctl was not looking in the wrong spot for the PID file). Any suggestions?? Thanks, Jason

2 2

[Serusers] Sems[14319]: Info: (AmSmtpClient.cpp)(connect)(95): connected to: 127.0.0.1
by fedora＠voice.dyndns.tv 12 Jul '05

12 Jul '05

Jul 13 03:40:17 sip Sems[14319]: Info: (AmSmtpClient.cpp)(connect)(95): connected to: 127.0.0.1 Jul 13 03:40:17 sip Sems[14319]: Info: (AmSmtpClient.cpp)(connect)(99): 127.0.0.1 welcomes us Jul 13 03:40:17 sip Sems[14319]: Info: (AmSmtpClient.cpp)(close)(135): We are now deconnected from server postfix/nqmgr[14980]: B53C320199: from=<voicemail(a)voice.dyndns.tv>, size=663047, nrcpt=1 (queue active)

1 0

[Serusers] sipsak without message file
by Sebastian Kühner 12 Jul '05

12 Jul '05

Hello, Does anybody know if it's possible to use sipsak without a message file? Now I'm using sipsak like this: sipsak -s sip:192.168.1.222:5061 -f bye.ser In the bye.ser file I have my sip message. Is it possible to put this message directly to the command line? If yes: How? Many thanks! Sebastian

2 2

[Serusers] sipsak with no message file
by Sebastian Kühner 12 Jul '05

12 Jul '05

Hello, Does anybody know if it's possible to use sipsak without a message file? Now I'm using sipsak like this: sipsak -s sip:192.168.1.222:5061 -f bye.ser In the bye.ser file I have my sip message. Is it possible to put this message directly to the command line? If yes: How? Many thanks! Sebastian

1 0

[Users] SERWEB
by harry gaillac 12 Jul '05

12 Jul '05

Just a question Does serweb is not just a big shit ? missed calls and accouting do not work for a long time !!! if somebody is able to use serweb please contact me, I think i'll give you some money look at iptel.org you can't delete your calls !!! I'm feeling tired to waste time with serweb sems ser . Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

3 7

[Serusers] Problem adding user .. pls help!!
by Yan Yu Lim 12 Jul '05

12 Jul '05

Hi, I'm trying to add authentication to ser (see below). I'm able to load ser without errors, but when I want to add a user using serctl add 1012 test magnum.test.net , I get error: 400; check if you use aliases in SER Any ideas? Regards, YY ser.cfg --------- if(uri != myself){ route(1); break; }; if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!proxy_authorize("magnum.test.net", "subscriber")) { proxy_challenge("magnum.test.net", "0"); break; }; save("location"); break; }

2 1

Re: [Serusers] Locate of a FAQ
by Jason Hoss 12 Jul '05

12 Jul '05

I tried that and got an error about a missing mysql.so file. I performed the make modules but was I supposed to do a make install_modules or something like that. I didn't see that in the README. Can I just do a make inside the ./ser/modules/mysql directory and then move the mysql.so over to the modules directory manually? Thanks for the prompt responses. On Tue, 2005-07-12 at 15:27 +0200, harry gaillac wrote: > try ser -c > --- Jason Hoss <jason_hoss(a)quintum.com> a écrit : > > > Okay, I have looked over all of the documentation > > that I could but there > > really isn't anything that points to my error and > > unfortunately the > > error message is not very descriptive. When I try > > to start SER I get > > the following error. > > > > ERROR: bad config file (1 errors) > > > > Again, this is not very decriptive and a diff on the > > standard file and > > my uncommented file (the only changes I made to the > > standard were for > > integration into MySQL) resulted in no changes other > > than a debug > > difference and the commented/uncommented. > > > > Any help would be appreciated. > > > > Thanks, > > > > Jason > > > > On Mon, 2005-07-11 at 17:31 -0400, Jason Hoss wrote: > > > > > I am new to this list and was wondering if there > > is a location for FAQ. > > > I don't want to post a question that has already > > been answered before > > > and since this is an installation question, my > > guess is that is already > > > has been. > > > > > > If not, that is fine. I will just ask the > > question. > > > > > > Thanks, > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger > Téléchargez cette version sur http://fr.messenger.yahoo.com

4 5

Tr: RE: [Users] SERWEB
by harry gaillac 12 Jul '05

12 Jul '05

Remarque : message transféré en pièce jointe. ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Locate of a FAQ
by Jason Hoss 12 Jul '05

12 Jul '05

I am new to this list and was wondering if there is a location for FAQ. I don't want to post a question that has already been answered before and since this is an installation question, my guess is that is already has been. If not, that is fine. I will just ask the question. Thanks,

4 4

[Users] NAT ping types
by Bogdan-Andrei Iancu 12 Jul '05

12 Jul '05

Hi folks, I extended nathelper (and some depending modules) to allow NAT pinging with SIP request. The main benefit of using SIP request instead of UDP package is the fact that there is a bidirectional traffic through the NAT - since each PING request from OpenSER (inbound traffic) will force the SIP client to generate a SIP reply (outbound traffic); so, even for NATs which updates the bind timeout only on outbound traffic, the NAT bind will be surely kept open - this couldn't be guaranteed by UDP package ping since the traffic was unidirectional (inbound - from outside to inside). The two type of pings can be use in the same time - mixed combination of contacts pinged with UDP packages and contacts pinged with SIP requests. What kind of ping will be used for each contact will be set at registration time via flags: if the REGISTRAR flag "sip_natping_flag" is set, the contact will be marked in USRLOC for SIP request pinging - NATHELPER will use default UDP package ping; for the marked contacts, the SIP request pinging will be used. To enable SIP request pinging in NATHELPER, you have to set the "sipping_from" parameter -default NULL- (FROM URI to be used for generating the SIP pings). Also you may change the "sipping_method" parameter to select a SIP method to be used (default is OPTIONS). The pinging SIP requests are statelessly generated by NATHELPER; the replies are automatically filtered out by the module. I preferred not to use TM to generate statefull replies from performance reasons: if you have 2000 nated contacts, at each 20 seconds (pinging interval), 2000 new transactions will be created, transactions witch will leave in memory for 5 (wait timer) + 2 (delete timer) = 7 seconds; I find this penalty (like huge shared memory consumption and transaction lookup slowness) not paying the purpose; I think the lack of retransmissions (in the stateless version) is something comfortable in a pinging scenario. One more thing - it's really not important the code of the replies (that's 200 or not) - the important idea is to make the client to send something out to refresh the bind. There is a small limitation of the current version - since get_all_ucontacts() returns the received URI instead of contact URI (when nated contact), the SIP pinging requests will have in RURI a different URI that the registered contact. Most of the clients doesn't care about this, but some - like SIPURA- replies with 404 NOT FOUND :). Any comments, suggestions, questions are welcomed. Docs are updated both on CVS and web (for registrar and nathelper modules) regards, Bogdan

2 2

[Serusers] Append_hf not working for invite requests
by Singh, Amit 12 Jul '05

12 Jul '05

> Hi, > > I have a configuration file where I am trying to send a > stateful/stateless 480 response, after appending a RETRY-AFTER in the > message header. But when I send the response back to the SIP enabled > mobile phone, the server does not append the RETRY-AFTER in the SIP > INVITE message header, when it sends a 480 response to the client UA. > > I have added both ethereal log and the cfg file. (you may wanna filter > the log for SIP requests). > > Could you please tell me why it is behaving so and what is the way > around it? > > Thanks a lot. > > <<ser_errors.cfg>> <<480ReplyT>> > Thanks & Regards, > Amit Singh > Sony Ericsson Mobile Communications, > 7001 Development Drive, > RTP Durham, NC 27709 > Ph: +1-919-472-1601 >

2 1

[Serusers] radius compile problem in ser 0.8.14
by Kertész Csaba 12 Jul '05

12 Jul '05

Hallo, I'm trying to compile the radius modules of SER 0.8.14 but a following error message and I don't find what is the problem: Best Regards, Csaba Kertesz gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all- stringops -malign-double -falign-loops -mcpu=athlon - DNAME='"auth_radius.so"' -DVERSION='"0.8.14"' -DARCH='"i386"' - DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux - DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM - DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP - DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT - DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 - DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL - DHAVE_MSGHDR_MSG_CONTROL -I/usr/local/include -c authrad_mod.c - o authrad_mod.o authrad_mod.c: In function `mod_init': authrad_mod.c:111: error: `DICT_VENDOR' undeclared (first use in this function) authrad_mod.c:111: error: (Each undeclared identifier is reported only once authrad_mod.c:111: error: for each function it appears in.) authrad_mod.c:111: error: `vend' undeclared (first use in this function) authrad_mod.c:135: warning: assignment makes pointer from integer without a cast authrad_mod.c:140: error: too many arguments to function `rc_conf_str' authrad_mod.c:140: error: too many arguments to function `rc_read_dictionary' authrad_mod.c:145: warning: implicit declaration of function `rc_dict_findvend' authrad_mod.c:163: error: too many arguments to function `rc_dict_findattr' authrad_mod.c:163: error: too many arguments to function `rc_dict_findval' authrad_mod.c: At top level: ../../dprint.h:51: warning: `fp' defined but not used ../../modules/usrloc/client_socket.h:17: warning: `buff' defined but not used ../../modules/usrloc/client_socket.h:18: warning: `rec_attached' defined but not used make: *** [authrad_mod.o] Error 1 ________________________________________________________________________________ [freemail] extra 1GB-os postafiókkal, Önnek már van? http://freemail.hu

2 1

[Serusers] What is wrong with SER 0.9.3
by Administrator 12 Jul '05

12 Jul '05

What is wrong with ser 0.9.3 it doesn't work with database authentication! RPM and source packages simply fail to start with database authentication enabled. Can someone please help me? Also 0.8.12 does not support mysql database accounting!!! Has anyone solved these two issues. I have looked everywhere but nothing! Thank you Yiannis Marios

2 1

[Serusers] radius authentication with 0.9.3 stable
by Steve Blair 12 Jul '05

12 Jul '05

Does anyone have a pointer to a how-to guide for setting up radius authentication with SER 0.9.3 stable? I am running on RH ES 4 with the latest radiusclient-ng installed and I've compiled in the radius related modules. I've added site specific modparam statements such as those in modules/auth_radius/readme but I'm stuck on what is left. Thanks, Steve

2 3

[Serusers] how to set parameters for acc_radius ser 0.9.3 ?
by Adrian Acosta 12 Jul '05

12 Jul '05

Hi, does anyone know how to set parameters for acc_radius module? I have the following error when set modparam("acc_radius", "radius_flag", 2) in ser.cfg: Jul 7 12:08:59 sip_proxy ser: set_mod_param_regex: No module matching acc_radius found | Jul 7 12:08:59 sip_proxy ser: parse error (72,19-20): Can't set module parameter any clue? Adrian _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

2 1

[Users] 'switch' statements
by Daniel-Constantin Mierla 12 Jul '05

12 Jul '05

Hello, 'switch' statements can be used now in configuration file to test the last returned code ('retcode') - CVS head version. This should simplify a lot the scripting for testing 'retcode' and should make the file better structured and easier to understand (hopefully :-) ). It is similar with C 'switch' construct, but it uses 'sbreak' instead of C-'break', because in openser the keyword 'break' is already used for other meaning. I am not fully convinced whether to use this 'sbreak' keyword, or better 'esac' (shell-like), any better idea? An example of usage is posted on dokuwiki page: http://www.openser.org/dokuwiki/doku.php?id=openser_core_cookbook#switch Daniel

3 3

[Serusers] SER 0.9.1 + mediaproxy VS IPCOP 1.4.6
by gunawan 12 Jul '05

12 Jul '05

hi all, I used ser 0.9.1 with mediaproxy, the User Agent can register and connect each other, but there is no sound, I think mediaproxy can't pass the audio stream through IPCOP.. anyone have experienced this??? regards, gunawan __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Users] missed calls
by harry gaillac 12 Jul '05

12 Jul '05

1 0

[Serusers] Possible bug in pa module
by Daniel Machín Vazquez-Illá 12 Jul '05

12 Jul '05

Hello. I think I have found a bug in pa module. If I send a SUBSCRIBE request without an Expires header, pa module rejects it with a 400 response. However, RFC 3265 states: "SUBSCRIBE requests SHOULD contain an Expires header. [...] If no Expires header is present in a SUBSCRIBE request, the implied default is defined by the event package being used." So, pa module should accept subscriptions without an expires header, but it doesn't now. This is quite upsetting, as some clients (Windows Messenger, for example) don't include this header on its SUBSCRIBE requests, and so these requests are rejected by SER. Please correct me if I'm mislead. Regards. Daniel Machín.

1 0

Tr: [Users] Tr: [Serusers] NEED HELP !!!!!!!!!!!
by harry gaillac 12 Jul '05

12 Jul '05

Remarque : message transféré en pièce jointe. ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Users] Tr: [Serusers] NEED HELP !!!!!!!!!!!
by harry gaillac 12 Jul '05

12 Jul '05

Remarque : message transféré en pièce jointe. Hello ser and openser users, I do hope somebody will help me Harry > ser-0.9.3/serweb-0.9.3/cvs sems > > Look at my ser.cfg . > I posted mail to find help. > > My problems: > > * I set tm timer + t_on_failure to forward > voicemessages to anavailable users without success > ??? Please Help not fixed > * when calls are forwarded to sems voicemail plugins > my smtp server reply <domain.template is set>: > Jul 11 16:24:16 serveur1 postfix/smtpd[3121]: > warning: > Illegal address syntax from > 19.10.119-80.rev.gaoland.net[80.119.10.19] in MAIL > command: voicemail(a)80.119.10.19 fixed if I remove @%domain% from default.template or mydomain.template ! > * When users press DND key forward to voicemail > failed > for aliases fixed If : if (isflagset(5) || lookup("aliases") && !t_check_status("(486)")) { route(6); route(1); break; }; > * I set acc module for accouting and missed calls > however missed calls are stored in db not displayed > in > serweb. > No accouting stored in db not displayed in serweb. Not fixed missed calls are not displayed in serweb ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] NEED HELP !!!!!!!!!!!
by harry gaillac 12 Jul '05

12 Jul '05

Hello, ser-0.9.3/serweb-0.9.3/cvs sems Look at my ser.cfg . I posted mail to find help. My problems: * I set tm timer + t_on_failure to forward voicemessages to anavailable users without success ??? * when calls are forwarded to sems voicemail plugins my smtp server reply <domain.template is set>: Jul 11 16:24:16 serveur1 postfix/smtpd[3121]: warning: Illegal address syntax from 19.10.119-80.rev.gaoland.net[80.119.10.19] in MAIL command: voicemail(a)80.119.10.19 * When users press DND key forward to voicemail failed for aliases * I set acc module for accouting and missed calls however missed calls are stored in db not displayed in serweb. No accouting stored in db not displayed in serweb. # $Id: ser.cfg,v 1.27 2005/03/10 14:16:25 Exp $ # # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3)) /* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@serveur1.home.net/ser" user=root group=ser fifo_user=root # owner of the ser fifo fifo_group=ser fifo_mode=0660 # fifo's permissions #disable_core=yes #disables core dumping #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #disable_tcp=yes #tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS) listen=80.119.7.89 # # ------------------ module loading ---------------------------------- loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params-- modparam("usrloc", "db_mode", 2) # -- autdb_params-- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- nathelper params -- modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) # mediaproxy params -- modparam("mediaproxy", "natping_interval", 30) modparam("mediaproxy", "mediaproxy_socket", "var/run/mediaproxy.sock") # -- registrar params -- modparam("registrar", "nat_flag", 4) # -- tm params -- modparam("tm", "fr_inv_timer", 15) modparam("tm", "fr_timer", 10) # --domain params -- modparam("domain", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("domain", "domain_table", "domain") modparam("domain", "db_mode", 1) # Use caching # -- permissions params -- modparam("permissions", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "default_deny_file", "/etc/ser/permissions.deny") modparam("permissions", "default_allow_file", "/etc/ser/permissions.allow") # -- acc params -- modparam("acc", "db_url", "mysql://ser:heslo@serveur1.home.net/ser") modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") { record_route(); }; if (method=="CANCEL" || method=="BYE") { end_media_session(); }; # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { if (has_totag() && method=="INVITE" || method=="ACK") { if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); }; use_media_proxy(); }; route(1); break; }; # Requests to others domains if (!is_uri_host_local()) { # Checking Authorization if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; }; if (client_nat_test("3")) { setflag(4); }; if (isflagset(4)) { force_rport(); fix_contact(); use_media_proxy(); }; # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for our domains use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local() || is_uri_host_local()) { if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; }; } route[1] { ########################### # Default Message Handler # ########################### t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } route[2] { ############################ # Register Message Handler # ############################ if (client_nat_test("3")) { setflag(4); force_rport(); fix_contact(); }; if (!www_authorize("nxs.yi.org", "subscriber")) { www_challenge("nxs.yi.org", "0"); sl_send_reply("401", "Unauthorized"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); break; }; } route[3] { ############################# # CANCEL and INVITE handler # ############################# if (client_nat_test("3")) { setflag(4); }; if (isflagset(4)) { force_rport(); fix_contact(); use_media_proxy(); }; # SIP destinations to PSTN if (uri=~"^sip:0[0-9]{4}@.*$" || uri=~"^sip:0[0-9]{10}@.*$" || uri=~"^sip:006[0-9]{8}@.*$") { route(4); route(1); break; }; # SIP destinations to IPBX if (uri=~"^sip:8[0-3]@.*$") { route(5); route(1); break; } # accounting db flags setflag(2); setflag(3); # Check ACL for Voicemail if (is_user_in("Request-URI","voicemail")) { setflag(5); }; t_on_failure("1"); if (t_check_status("(486)")) { route(6); route(1); break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (isflagset(5)) { route(6); route(1); } else { sl_send_reply("404", "User Not Found"); break; }; }; route(1); break; } route[4] { ########################## # Outgoing PSTN Handler # ########################## if (uri=~"^sip:0[0-9]{4}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; }; } else if (uri=~"^sip:0[0-9]{10}@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; }; } else if (uri=~"^sip:006[0-9]{8}@.*$") { if (!is_user_in("From", "cellphone")) { sl_send_reply("403", "Forbidden"); break; }; }; # Checking Authorization to PSTN if (dst_ip==192.168.0.50 && !allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; }; }; rewritehostport("192.168.0.50:5050"); } route[5] { ########################## # Asterisk Handler # ########################## if (uri=~"^sip:8[0-3]@.*$") { if (!is_user_in("From", "local")) { sl_send_reply("403", "Forbidden"); break; }; }; # Checking Authorization to PBX if (dst_ip==192.168.0.50 && !allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); sl_send_reply("407", "Proxy Authentication Required"); break; }; }; rewritehostport("192.168.0.50:5050"); } route[6] { ########################## # Voicemail Handler # ########################## rewritehostport("80.119.7.89:5040"); } onreply_route[1] { ########################## # Statefull Handler # ########################## if (client_nat_test("1")) { setflag(4); }; if (isflagset(4) && status=~"(180) || (183) || 2[0-9][0-9]") { if(search("^Content-Type: .*$")) { use_media_proxy(); }; }; } failure_route[1] { ########################## # Voicemail Handler # ########################## if (method=="INVITE" && isflagset(5)) { revert_uri(); # resend to voicemail with original request URI rewritehostport("80.119.7.89:5040"); }; } ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 2

[Users] Broken Calls now written to Database
by Ozan Blotter 12 Jul '05

12 Jul '05

Dear List, I'm making a call to PSTN, it's okay i can talk with the other party via ATA, but suddenly i unplug power from it, and in accounting module it does not write line with BYE message so i cannot understand whether the call is finished or not. only INVITE and ACK are written, no BYE :( This may be a security hole for customers, because they talk for a long time and they may unplug their units or cut power so it does not tell SER it's over. How i can prevent this, also what i need to add as a line for telling ACC module not to write calls from 833 to 833 into database, which are free SIP2SIP calls ? Btw, a Postpaid Billing System is on the way for OpenSER built in PHP, later i will need OpenSER group's help to place it onto hosting site. Shortly it will have features: * Nothing extra from package, default MySql Database which comes with OpenSER Release is being used, * All routing is done via OpenSER's ser.cfg , * Initial Rate, Initial Time, Increment Rate, Increment Time will be user variable , * Account Creation/Deletion done in PHP , * Invoice Generation and CDR will include many variables , * Rating will be in PHP, * And everything is totaly free :) If you have ideas and/or suggestion please write back to me so i can work for it too. Reqs: OpenSER & PHP & MySql & Apache Thanks, Ozan debug=3 fork=yes log_stderror=no listen=212.XXX.104.XXX port=5060 children=4 alias=212.XXX.104.XXX dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/acc.so" #modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "use_domain", 1) modparam("domain", "db_mode", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-asymmetric-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-asymmetric-clients") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) modparam("registrar", "default_expires", 60) modparam("registrar", "min_expires", 30) modparam("registrar", "nat_flag", 6) modparam("registrar", "use_domain", 1) modparam("rr", "enable_full_lr", 1) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section and Acc section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("212.XXX.104.XXX:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); setflag(1); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (uri==myself) { if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (uri=~"^sip:0[0-9]*@*") { rewritehost("212.XXX.59.XXX"); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; if (method=="CANCEL") { route(1); break; }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:\ +0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; }

2 1

[Serusers] SER and Max TNT
by andrew matthews 12 Jul '05

12 Jul '05

Anyone have an example of allowing ser to accept all registrations and then routing all calls to a TNT using SIP? thanks in advanced. Andrew

2 1

[Serusers] ser+gsm authentication
by jeff kwong 12 Jul '05

12 Jul '05

Hi guys! I want to try out the ser and kphone gsm authentication proof of concept in cvs. http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/gsm_auth/ However the link to the kphone source with gsm authentication can no longe be found. http://www.iptel.org/~dcm/ser-gsm/kphone-3.11.1-gsm.tgz Maybe someone here was able to have a copy of the file. Could you kindly send me a copy. I tried using kphone 3.11 but itself even without the patch can't register. It my traces it seems that kphone listens on port 5060 but sends request on another port. Thus when replies are sent on the port used in sending, kphone wasn't able to recieve it. Btw, do you guys know where I could get a decent getting started guide on ser with radius? The onsip manuals have missing pages regarding integrating radius. Thanks in advance for whatever information or ideas! _jeff

1 0

[Serusers] Is mediaproxy of SER proxy or full proxy?
by 皮面 12 Jul '05

12 Jul '05

I'm a fresher and I was wondering which one the mediaproxy module in SER adopt to realize NAT traversal,proxy or full proxy?Thanks! --------------------------------- DO YOU YAHOO!? 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱

1 0

[Serusers] Add prefixes to outgoing numbers
by andrew matthews 12 Jul '05

12 Jul '05

Is there a way to add prefixes to outgoing numbers before they get send to the rewritehost? I need to take a number like 800-555-1212 and change it into 3338005551212 thanks Andrew

2 1

FW: Re: [Serusers] Module ACC_RADIUS problem
by Maximo Marin 11 Jul '05

11 Jul '05

Thanks, i am receiving some starts and stops. Now, is it possible to receive one start and one stop when calling sip to sip, sip to pstn and pstn to sip?? I am not getting the start when calling sip to pstn, i am stuck and frustrated. Maxi. >From: Jan Janak <jan(a)iptel.org> >To: Maximo Marin <maxi_tech(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Module ACC_RADIUS problem >Date: Fri, 8 Jul 2005 21:12:47 +0200 > >On 08-07-2005 10:30, Maximo Marin wrote: > > Hello everyone, i am running, ser 0.9.3 on debian stable and get this >error: > > > > Jul 8 10:21:41 sip_server ser: set_mod_param_regex: No module matching > > acc_radius found | > > Jul 8 10:21:41 sip_server ser: parse error (55,19-20): Can't set module > > parameter > > > > I have this in line 55 of my ser.cfg > > > > modparam("acc_radius", "radius_flag", 1) > > Please use modparam("acc", "radius_flag", 1) instead. The real name of > the module is acc, just the file is named acc_radius. > > Jan. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users