- sr-users - kamailio.org

[Users] What causes loose_route() to return false ?
by Jeremie Le Hen 26 Sep '06

26 Sep '06

Hi list, in numerous example configuration files, I saw the following statement (where "route(1)" is the final routing block): % if (loose_route()) { % route(1); % } % % ... % % route(1); It works for me, but I am just wondering what causes the loose_route() function to return a failure ? In this case, it seems number of actions used to be performed before calling the final message routing block. Naturally, I checked the rr module documentation, but the descriptions is very small and only refers to RFC 3161. I have read some parts of this RFC, thus I know what loose routing means (basically, it uses always the same URI all along the proxy string, removing IP addresses in the Route header gradually, contrariwise to strict routing which puts the real URI at the end of the Route header and use the next proxy as URI). In spite of this, I cannot figure why this function should fail. I'm pretty confident this is to help for the scripting logic, and I was supplied with some explanations. Thank you. Regards, -- Jeremie Le Hen < jeremie at le-hen dot org >< ttz at chchile dot org >

2 1

[Users] Call gets always busy!
by Ronald Wiplinger 26 Sep '06

26 Sep '06

I have set-up two Grandstream phones, one is inside my LAN and one is outside. Below is the ngrep output. Can you please explain me both (openserctl ul show and ngrep) and where the problem my be? 7111 calls 7211, both are registerd as: ...Record(0x2b68516ca938)... domain: 'location' aor : '7111' ~~~Contact(0x2b68516ca9b0)~~~ domain : 'location' aor : '7111' Contact : 'sip:7111@192.168.250.115' Expires : 404 q : Call-ID : '748276c266577824(a)192.168.250.115' CSeq : 10157 User-Agent: 'Grandstream GXV3000 1.0.0.24' received : '' Path : '' State : CS_NEW Flags : 0 Sock : 192.168.250.41:5060 (0x610fc0) Methods : 7807 next : (nil) prev : (nil) ~~~/Contact~~~~ .../Record... ...Record(0x2b68516d0950)... domain: 'location' aor : '7211' ~~~Contact(0x2b68516cb7d0)~~~ domain : 'location' aor : '7211' Contact : 'sip:7211@192.168.87.103' Expires : 2382 q : Call-ID : '8d96c35345b355d7(a)192.168.87.103' CSeq : 10001 User-Agent: 'Grandstream GXV3000 1.0.0.24' received : '' Path : '' State : CS_NEW Flags : 0 Sock : 59.124.210.41:5060 (0x610ef0) Methods : 7807 next : (nil) prev : (nil) ~~~/Contact~~~~ .../Record... # U 2006/09/26 10:49:27.574906 192.168.250.115:5060 -> 192.168.250.41:5060 INVITE sip:7211@192.168.250.41 SIP/2.0. Via: SIP/2.0/UDP 192.168.250.115;branch=z9hG4bKf777932528b49881. From: <sip:7111@192.168.250.41>;tag=d71217459a54cde3. To: <sip:7211@192.168.250.41>. Contact: <sip:7111@192.168.250.115>. Supported: replaces, timer. Call-ID: 76740d0122a46445(a)192.168.250.115. CSeq: 15245 INVITE. User-Agent: Grandstream GXV3000 1.0.0.24. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE,PRACK. Content-Type: application/sdp. Content-Length: 438. . v=0. o=7111 8000 8000 IN IP4 192.168.250.115. s=SIP Call. c=IN IP4 192.168.250.115. t=0 0. m=audio 15004 RTP/AVP 0 3 18 4 8. a=sendrecv. a=rtpmap:0 PCMU/8000. a=rtpmap:3 GSM/8000. a=rtpmap:18 G729/8000. a=rtpmap:4 G723/8000. a=rtpmap:8 PCMA/8000. a=ptime:20. m=video 15006 RTP/AVP 99. a=sendrecv. a=rtpmap:99 H264/90000. a=fmtp:99 profile-level-id=42801E; packetization-mode=0; sprop-parameter-sets=J0KAFJWgUH5A,KM4C/ID=. a=framerate:15. # U 2006/09/26 10:49:27.587708 192.168.250.41:5060 -> 192.168.250.115:5060 SIP/2.0 100 trying -- your call is important to us. Via: SIP/2.0/UDP 192.168.250.115;branch=z9hG4bKf777932528b49881. From: <sip:7111@192.168.250.41>;tag=d71217459a54cde3. To: <sip:7211@192.168.250.41>. Call-ID: 76740d0122a46445(a)192.168.250.115. CSeq: 15245 INVITE. Server: OpenSer (1.1.0-notls (x86_64/linux)). Content-Length: 0. Warning: 392 192.168.250.41:5060 "Noisy feedback tells: pid=31770 req_src_ip=192.168.250.115 req_src_port=5060 in_uri=sip:7211@192.168.250.41 out_uri=sip:7211@192.168.87.103 via_cnt==1". . # U 2006/09/26 10:49:56.862266 192.168.250.41:5060 -> 192.168.250.115:5060 SIP/2.0 408 Request Timeout. Via: SIP/2.0/UDP 192.168.250.115;branch=z9hG4bKf777932528b49881. From: <sip:7111@192.168.250.41>;tag=d71217459a54cde3. To: <sip:7211@192.168.250.41>;tag=fa997f81440371de71ab448ebdb9af56-37d0. Call-ID: 76740d0122a46445(a)192.168.250.115. CSeq: 15245 INVITE. Server: OpenSer (1.1.0-notls (x86_64/linux)). Content-Length: 0. Warning: 392 192.168.250.41:5060 "Noisy feedback tells: pid=31771 req_src_ip=192.168.250.115 req_src_port=5060 in_uri=sip:7211@192.168.250.41 out_uri=sip:7211@192.168.87.103 via_cnt==0". . # U 2006/09/26 10:49:56.865291 192.168.250.115:5060 -> 192.168.250.41:5060 ACK sip:7211@192.168.250.41 SIP/2.0. Via: SIP/2.0/UDP 192.168.250.115;branch=z9hG4bKf777932528b49881. From: <sip:7111@192.168.250.41>;tag=d71217459a54cde3. To: <sip:7211@192.168.250.41>;tag=fa997f81440371de71ab448ebdb9af56-37d0. Contact: <sip:7111@192.168.250.115>. Call-ID: 76740d0122a46445(a)192.168.250.115. CSeq: 15245 ACK. User-Agent: Grandstream GXV3000 1.0.0.24. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE,PRACK. Content-Length: 0. . #

1 0

[Serusers] retrieve data from database
by jorain 26 Sep '06

26 Sep '06

Hi all, I want to pull data from mysql table inside ser.cfg. can we declare variable within route()? which module will be used? Is it exec module? Thanks. regards, jorain

1 0

[Serusers] Problem with ATA 186
by Teran Jesus 25 Sep '06

25 Sep '06

Hello, i have a problem with the ATA 186 in the SER 0.9.6, when i generate a call from my ata, when the ATA received the OK from the SER, the ATA don't generates the ACK correctly, this missing the user in the ACK, something like this, ACK sip:XXX.XXX.XXX.XXX SIP/2.0, i believe the sip poroxy is missing something in the OK, because i have tested this in the SER version 0.8.12 and this don't have the same problem. Do you know how can i resolv the problem?

2 1

[Serusers] Does Ser support Multi Call-Legs accounting?
by Ricardo Carvalho 25 Sep '06

25 Sep '06

Hi all, As seen in the following URL for OpenSer, I wonder if Ser supports Multi Call-Legs accounting, (feature that OpenSer already implements): http://openser.org/docs/modules/1.1.x/acc.html#MULTI-CALL-LEGS I have my system just already in production using Ser, but only now I realised that this functionality maybe lacking in Ser!... I tried to use the directive: modparam("acc", "multi_leg_enabled", 1) in my ser.cfg file, but doing so, Ser doesn't start! Is there any other way to enable in Ser this feature? How? Regards, Ricardo.

3 3

Re: [Serusers] Performance
by Jiri Kuthan 25 Sep '06

25 Sep '06

At 23:59 25/09/2006, Weiter Leiter wrote: >SER goes past a couple of thousands CPS into simple proxying setups. >However, in most common setups, the storage backends prove to add quite a drag. Glad to second that opinion. Well -- it is easy to explain, for one SIP transaction one has modulo six database transactions. SIP is about text processing. Database is about I/O. So what are you going to optimize first? :-) -jiri >There isn't (yet?) a benchmarking SER config. >Hence the question: how did you test? > >On 9/25/06, Victoria Cortez <<mailto:ser_list@conexiongroup.com>ser_list(a)conexiongroup.com> wrote: >Hi all, > > I've been making some performance tests with Ser on a huge and powerfull hardware. I couldn't reach 1000 CPS. Did anybody reached or past this amount of traffic with Ser? > > Thanks in advance, > >Víctor > > > >_______________________________________________ >Serusers mailing list ><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] Commerical Support SER IP->PSTN Gateway
by Murray Hooper 25 Sep '06

25 Sep '06

Hi Folks I am looking for anyone that is familiar with getting SER to automatically call forward all calls coming in via IP to call forward to PSTN Gateway with given telno. I am trying to get this up quickly to prove viability of concept.

3 2

[Serusers] Writing in acc table information from SIP messages
by Ricardo Carvalho 25 Sep '06

25 Sep '06

Hi, How may I edit ser.cfg so that every time Ser receives an 302 reply, it writes in acc table the "SIP contact address" of the forwarded URI address that comes in that message? I think that can be done with avp_write that searches that contact URI address in SIP messages and stores it in a variable, and than using avp_db_store to write the contents of that variable to the database, isn't it? But how can I do that? Any help? Regards, Ricardo.

1 0

[Users] NEW: ACC module - new multi-leg format
by Bogdan-Andrei Iancu 25 Sep '06

25 Sep '06

Hi everybody, with the new ACC changes, I introduced a new format for multi-leg accounting. The overall behaviour is the same, but it's a more flexible approach - instead of having a fix logging frame (source and destination), the script writer has the liberty to define whatever and how many fields to be logged for each leg. All this is controlled via a single module parameter - the "multi_leg_info". See: http://openser.org/docs/modules/1.2.x/acc.html#AEN248 Regards, Bogdan

1 0

[Users] Re: Users Digest, Vol 16, Issue 53
by Mark Kent 25 Sep '06

25 Sep '06

Andrew And wrote: > How is DNS resolution If I have some Openser destination and I use > t_relay()? and Klaus replied: > according to RFC3263. Depending on the URI (numerical/domain, with or > without port, with or without transport protocol) it us NAPTR+SRV+AAAA/A and my question (with a GeorgeBush squint) is: "What?" Suppose I get this on sip.example.com: INVITE 14085551212(a)sip.example.com What do I need to do in openser to find out if I should t_relay that to a VoIP destination, because 14085551212 is known in the e164 hierarchy (both e164.arpa and e164.org), versus just shipping it off to my pstn gateway? Thanks, -mark

2 1

[Serusers] how to get ser 0.10
by olivier.taylor 25 Sep '06

25 Sep '06

how to get ser 0.10 sorry for the noob question :( Olivier

2 1

[Serusers] Presence
by senthil.nachimuthu＠bt.com 25 Sep '06

25 Sep '06

Hi, I want to configure SER <ser/about> 0.9.6 in such a way that It can proxy presence messages(SUBSCRIBE,PUBLISH) to presence server. Can you let me know how can I do that? Thanks and Regards, Senthil Kumar, Presence Capability, BT-Service Execution Platform, B62-MH,Orion Building,Adastral Park,Ipswich Work:+44 (0)1473 605 668 Mobile:+44 (0)7772287447

1 0

[Serusers] USE XLOG
by Legos Engineering 25 Sep '06

25 Sep '06

Hello, I am a student and i do a workplacement. So i must work on the VOIP, but ihave no experience in. I would like know thank to a log, when an user connect/disconnect his user ugent. I know that i must use xlog, but i'm lost for many reasons. The first : Idon't know variables i must use to do what i want. The second : I don't know where i must write the line in ser.cfg to have this log. The third : Where is the log generated by xlog, and if there isn't one, how i can create this log. The fourth : If i must write something in xlog.so, how open it. Because when i open it with VI or NANO there is only encrypted data. THX to help me. If you can answer on my mail : sylvain.nigen(a)legos.fr, because it's easier ton know if i have an answer than to search the answer on SER USER. THANKS

2 1

[Serusers] ipv6 support
by P Jayasree 25 Sep '06

25 Sep '06

hi, I;ve installed ser 0.9.x version on linux ipv6 enabled PC.Now the ser is running.But it says it is listening on ipv4 address on udp and tcp.How do i know whether it is listening on ipv6 ?do i need to configure for anything ,for it to listen on ipv6 adress also! Kindly help in this issue. Regards, Jayasree The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail immediately and permanently delete the message and any attachments.

1 0

[Users] NAT: minimise media proxying whilst maximising usability
by kjcsb 25 Sep '06

25 Sep '06

I am trying to reach a suitable trade-off between minimising the amount of proxied media and minimising one-way/no audio for all clients including NATed ones. When a UA that has been configured to use STUN sends a register message to SER the behaviour differs depending on the device. Some, such as a Sipura device, send the private address in the Via and the public address in the Contact: U 60.234.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 REGISTER sip:domain.com SIP/2.0..Via: SIP/2.0/UDP 192.168.0.14:5060;branch=z9hG4bK-64d76b15..From: <sip:6435488773@domain.com >;tag=4cdc1208fa650916o0..To: <sip:6435488773@domain.com>..Call-ID: 1143f50-45857c6e@192.168.0.14..CSeq: 1 REGISTER..Max-Forwards: 70..Contact: <sip:6435488773@60.234.nnn.nnn:5060>;expires=60..User-Agent: Sipura/SPA3000-2.0.13(GWg)..Content-Length: 0..Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER..Supported: x-sipura.... Others, such as a Grandstream device, send the public address in both the Via and Contact: U 60.234.nnn.nnn:32483 -> 147.202.nnn.nnn:5060 REGISTER sip:domain.com SIP/2.0..Via: SIP/2.0/UDP 60.234.nnn.nnn:32483;branch=z9hG4bK113cfc09c6acd189..From: "User" <sip: 5551234(a)domain.com>;tag=dede17c9405d4e0e..To: <sip:5551234@domain.com>..Contact: <sip:5551234@60.234.nnn.nnn:32483>.. Call-ID: fc200867c9a03268@192.168.0.10..CSeq: 100 REGISTER..Expires: 60..User-Agent: Grandstream BT100 1.0.6.7..Max-Forwards: 70..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... I am using the opsip.org configuration file together with mediaproxy. In the case of the Sipura, flag(6) is set in route[2] since client_nat_test("7") evaluates to true and so any calls with this device will be proxied. From ready various posts on the topic I understand this is a very safe configuration since it will deal with virtually every scenario. However it is also very expensive since it will proxy audio in situations where it is not really required. For example a call between two Sipura devices will be proxied when, due to STUN, it is unecessary in most cases. As I understand it the cases when it would be necessary are: - both UAs behind the same NAT with the SER proxy outside the NAT and router doesn't support hairpinning - devices behind symmetric NATs On the other hand, flag(6) will not be set with the Grandstream and so audio will not be proxied when this device calls another device that is either not behind NAT or is another NATed Grandstream. This is great in most cases but audio problems could arise in the cases described above. What I am therefore thinking is that by default I will not proxy media for devices where a public IP address has been determined. But I will create an avp that specifies by user whether to enable the standard onsip.org config. Also there could even be a dial prefix (e.g. *666) that turns proxying on. route[2] #Do this by default if (!search("^Contact: [ ]*\*") && client_nat_test("1") { etc #Do this if avp set or prefix dialled if (!search("^Contact: [ ]*\*") && client_nat_test("7") { etc I would appreciate any comments on the above. Have I understood the issues correctly? Will this type of configuration work? What are the disadvantages? Regards Cameron

4 4

[Serusers] Problem in testing MSILO module. (Please response..Really need help!!)
by Meidiana Ten 25 Sep '06

25 Sep '06

Hi there, Good afternoon.. I'd like to ask some questions depending on my last project problems.. maybe I had ever asked it in this forum, but I quite don't understand the solution you guys have told me. Maybe it's because I don't give the details about my OS and many more, and I'm a newbie too. But I really thanx for the reply on my last question. I'm using Red Hat 9 Linux to build my SIP Server. I use SER 0.9.7 as the server. The problem I found here is to test the MSILO module which I add to the ser.cfg Below is the description of my ser.cfg: ------------------------------------------------------- debug=9 fork=no log_stderror=yes listen=202.95.149.2 # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" fifo_mode=0666 loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("tm", "fr_timer", 10 ) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "wt_timer", 10 ) modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@pcr.ac.id") alias="pcr.ac.id" route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); break; }; # ----------------------------------------------------------------- # Offline Message Store Section # ----------------------------------------------------------------- if (is_from_local()) { if (method=="REGISTER") { save("location"); log("REGISTER received -> dumping messages with MSILO\n"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; }; # domestic SIP destinations are handled using our USRLOC DB if(!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!method=="MESSAGE") { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; }; # forward to current uri now; use stateful forwarding that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); break; }; if (uri==myself) { if (method=="ACK") { route(6); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO:the downstream UA doesn't support MESSAGEs\n"); # we have changed the R-URI with the contact address, ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:\ +\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("pcr.ac.id","subscriber")) { www_challenge("pcr.ac.id","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (!allow_trusted() && nat_uac_test("19")) { setflag(6); } lookup("aliases"); if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("pcr.ac.id","subscriber")) { proxy_challenge("pcr.ac.id","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; if (uri=~"^sip:9[0-9]*@") { route(4); break; }; if (uri!=myself) { route(5); route(1); break; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); break; }; sl_send_reply("404", "User Not Found"); break; }; if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { if(isflagset(6)) { unforce_rtp_proxy(); } sl_reply_error(); }; } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("202.95.149.2:5060"); # INSERT YOUR PSTN GATEWAY IP ADDRESS avp_write("i:45", "inv_timeout"); if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:\ +0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------- I don't know whether my configuration below is right or still wrong..I've test it using 2 clients. I made one of them online, and the other off. I try to call the offline one, but it said user not found. In my thought, if I've activated MSILO module, it will automatically ask the online client if he wants to store offline voice message or not... Please tell me what's wrong with the configuration. In addition, the server can be use to make a call between online clients. Second question is about my serweb. I have seen my config.php in /var/www/html/serweb directory. It contains as shown below: ------------------------------------------------------- /* Unless you used brute-force to change SER table names */ $this->table_subscriber="subscriber"; $this->table_pending="pending"; $this->table_grp="grp"; $this->table_aliases="aliases"; $this->table_location="location"; $this->table_missed_calls="missed_calls"; $this->table_accounting="acc"; $this->table_phonebook="phonebook"; $this->table_event="event"; $this->table_netgeo_cache="netgeo_cache"; $this->table_ser_mon="server_monitoring"; $this->table_ser_mon_agg="server_monitoring_agg"; $this->table_message_silo="silo"; / below is the problem / $this->table_voice_silo="voice_silo"; ------------------------------------------------------- And below is my SER tables: +-----------------------+ | Tables_in_ser | +-----------------------+ | acc | | active_sessions | | admin_privileges | | aliases | | calls_forwarding | | config | | domain | | event | | grp | | location | | missed_calls | | pending | | phonebook | | preferences_types | | reserved | | server_monitoring | | server_monitoring_agg | | silo | | speed_dial | | subscriber | | trusted | | uri | | usr_preferences | | version | +-----------------------+ 24 rows in set (0.00 sec) ------------------------------------------------------- You can see that there is no table named "voice_silo" in my SER tables. It cause error on one of my web page named message_store.php. It requires voice_silo table. I'd like to ask you what is the different between table named "silo" and "voice_silo"? Can both of them store offline voice message? If I have to add "voice_silo" in my SER table, please give me the description of entities needed to build voice_silo table. Last, I'd like to thank you guys for the willingness to read my questions and problems. Of course I'm expecting the answers too. Thanx again. Regards, Meidiana Ten __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Fwd: [Users] mediaproxy working, but not if asterisk is involved
by Arne Van Theemsche 25 Sep '06

25 Sep '06

I had forgotten to cc the list ---------- Forwarded message ---------- From: Arne Van Theemsche <arnevt(a)gmail.com> Date: 22-sep-2006 9:06 Subject: Re: [Users] mediaproxy working, but not if asterisk is involved To: daniel(a)voice-system.ro the problem is that I don't even see the "reply received"... So for some reason the asterisk reply isn't passed through to the onreply_route. My theory is that asterisk doesn't respect the reply parameters somewhere, but it isn't clear to me where arne 2006/9/22, Daniel-Constantin Mierla <daniel(a)voice-system.ro>: > > Do you get "using mediaproxy" message in the logs? If not, that the > search() matches, I cannot sot right now what is wrong with the > expression. But you can move t_on_reply("1") into if*method=="INVITE") > statement and replace the search condition with if (status =~ > "(183)|(2[0-9][0-9])"). > > See: > http://voip-info.org/wiki/view/OpenSER+And+Mediaproxy > > Cheers, > Daniel > > > On 09/21/06 21:46, Arne Van Theemsche wrote: > > below is the transaction of the failed mediaproxy invite. I allready > > could tell that replies go through openser, but I don't see the reason > > why ser doesn't see them as replies (and use the mediaproxy function). > > > > as you can see, the invite from <ip client> to <ip asterisk> (through > > <ip OPENSER>, which is also ip of mediaproxy) goes in one direction > > good (the ip in the SDP is changed from <ip client> to <ip openser>, > > but the return path en the OK (with it's SDP) is not changed > > > > I did a tcpdump with a call between 2 clients, where the proxy works, > > and the only difference I see is that in the reply of asterisk, there > > is no rinstance field in the contact header > > > > thanks > > arne > > > > U <ip client>:5060 -> <ip OPENSER>:5060 > > INVITE sip:701@<sip domain>;transport=UDP SIP/2.0..From: "arne" > > <sip:1002@<sip domain>>;tag=514a90c3-13c4-7a70a-1de331c0-5e4f..To: > > "701"< sip:701@sipgat > > e.evonet.be <http://e.evonet.be>>..Call-ID: > > 1064dc44-514a90c3-13c4-7a70a-1de331be-529@<ip > > <mailto: 1064dc44-514a90c3-13c4-7a70a-1de331be-529@%3Cip> > > client>..CSeq: 1 INVITE..Via: SIP/2.0/UDP <ip > > client>:5060;rport;branch=z9hG4bK-7a70a-1d > > e331c2-69dc..Max-Forwards: 70..Supported: > > replaces,100rel,timer..Allow: INVITE, ACK, BYE, REFER, NOTIFY, CANCEL, > > OPTIONS, INFO, PRACK..User-Agent: Swissvoice IP1 > > 0 SP v1.0.1 (Build 3) 3.0.5.1..Allow-Events: talk, hold, > > conference..Contact: "arne" <sip:1002@<ip > > client>:5060;transport=UDP>..Session-Expires: 1800..Content- > > Type: application/sdp..Content-Length: 246....v=0..o=rtp/1 501514 > > 501514 IN IP4 <ip client>..s=-..c=IN IP4 <ip client>..t=0 0..m=audio > > 50000 RTP/AVP 18 0 8.. > > a=fmtp:18 annexb=yes..a=ptime:40..a=SilenceSupp:on..a=rtpmap:18 > > g729/8000..a=rtpmap:0 pcmu/8000..a=rtpmap:8 pcma/8000..a=sendrecv.. > > # > > > > U <ip OPENSER>:5060 -> <ip asterisk>:5060 > > INVITE sip:701@<sip domain>;transport=UDP SIP/2.0..Record-Route: > > <sip:<ip OPENSER>;lr=on;ftag=514a90c3-13c4-7a70a-1de331c0-5e4f>..From: > > "arne" < sip:1002@si > > pgate.evonet.be > > <http://pgate.evonet.be>>;tag=514a90c3-13c4-7a70a-1de331c0-5e4f..To: > > "701"<sip:701@<sip domain>>..Call-ID: > > 1064dc44-514a90c3-13c4-7a70a-1de331be-529@<ip > > <mailto:1064dc44-514a90c3-13c4-7a70a-1de331be-529@%3Cip> client>..C > > Seq: 1 INVITE..Via: SIP/2.0/UDP <ip OPENSER>;branch=0..Via: > > SIP/2.0/UDP <ip > > > client>:5060;rport=5060;branch=z9hG4bK-7a70a-1de331c2-69dc..Max-Forwards: > > 69..Supp > > orted: replaces,100rel,timer..Allow: INVITE, ACK, BYE, REFER, > > NOTIFY, CANCEL, OPTIONS, INFO, PRACK..User-Agent: Swissvoice IP10 SP > > v1.0.1 (Build 3) 3.0.5.1..Allo > > w-Events: talk, hold, conference..Contact: "arne" <sip:1002@<ip > > client>:5060;transport=UDP>..Session-Expires: 1800..Content-Type: > > application/sdp..Content-Leng > > th: 246....v=0..o=rtp/1 501514 501514 IN IP4 <ip client>..s=-..c=IN > > IP4 <ip OPENSER>..t=0 0..m=audio 60106 RTP/AVP 18 0 8..a=fmtp:18 > > annexb=yes..a=ptime:40..a > > =SilenceSupp:on..a=rtpmap:18 g729/8000..a=rtpmap:0 > > pcmu/8000..a=rtpmap:8 pcma/8000..a=sendrecv.. > > # > > > > U <ip asterisk>:5060 -> <ip OPENSER>:5060 > > SIP/2.0 100 Trying..Via: SIP/2.0/UDP <ip > > OPENSER>;branch=0;received=<ip OPENSER>..Via: SIP/2.0/UDP <ip > > client>:5060;rport=5060;branch=z9hG4bK-7a70a-1de331c2- > > 69dc..From: "arne" <sip:1002@<sip > > domain>>;tag=514a90c3-13c4-7a70a-1de331c0-5e4f..To: "701"<sip:701@<sip > > domain>>..Call-ID: 1064dc44-514a90c3-13c4-7a70 > > a-1de331be-529@<ip <mailto:a-1de331be-529@%3Cip> client>..CSeq: 1 > > INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK, CANCEL, OPTIONS, > > BYE, REFER, SUBSCRIBE, NOTIFY..Contact: <sip:701@ > > <ip asterisk>>..Content-Length: 0.... > > # > > > > U <ip OPENSER>:5060 -> <ip client>:5060 > > SIP/2.0 100 Trying..Via: SIP/2.0/UDP <ip > > client>:5060;rport=5060;branch=z9hG4bK-7a70a-1de331c2-69dc..From: > > "arne" <sip:1002@<sip domain>>;tag=514a90c3-13c > > 4-7a70a-1de331c0-5e4f..To: "701"<sip:701@<sip domain>>..Call-ID: > > 1064dc44-514a90c3-13c4-7a70a-1de331be-529@<ip > > <mailto:1064dc44-514a90c3-13c4-7a70a-1de331be-529@%3Cip> > > client>..CSeq: 1 INVITE..User-Agent: Asteri > > sk PBX..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, > > NOTIFY..Contact: <sip:701@<ip asterisk>>..Content-Length: 0.... > > # > > > > U <ip asterisk>:5060 -> <ip OPENSER>:5060 > > SIP/2.0 200 OK..Via: SIP/2.0/UDP <ip OPENSER>;branch=0;received=<ip > > OPENSER>..Via: SIP/2.0/UDP <ip > > client>:5060;rport=5060;branch=z9hG4bK-7a70a-1de331c2-69dc > > ..Record-Route: <sip:<ip > > OPENSER>;lr=on;ftag=514a90c3-13c4-7a70a-1de331c0-5e4f>..From: "arne" > > <sip:1002@<sip domain>>;tag=514a90c3-13c4-7a70a-1de331c0-5e4f > > ..To: "701"<sip:701@<sip domain>>;tag=as60ebd3fc..Call-ID: > > 1064dc44-514a90c3-13c4-7a70a-1de331be-529@<ip > > <mailto:1064dc44-514a90c3-13c4-7a70a-1de331be-529@%3Cip> > > client>..CSeq: 1 INVITE..User-Agent: Asterisk PBX > > ..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, > > NOTIFY..Contact: <sip:701@<ip asterisk>>..Content-Type: > > application/sdp..Content-Length: 188....v= > > 0..o=root 26276 26276 IN IP4 <ip asterisk>..s=session..c=IN IP4 <ip > > asterisk>..t=0 0..m=audio 13434 RTP/AVP 0 8..a=rtpmap:0 > > PCMU/8000..a=rtpmap:8 PCMA/8000..a= > > silenceSupp:off - - - -.. > > # > > > > U <ip OPENSER>:5060 -> <ip client>:5060 > > SIP/2.0 200 OK..Via: SIP/2.0/UDP <ip > > > client>:5060;rport=5060;branch=z9hG4bK-7a70a-1de331c2-69dc..Record-Route: > > <sip:<ip OPENSER>;lr=on;ftag=514a90c3-13c4-7a70 > > a-1de331c0-5e4f>..From: "arne" <sip:1002@<sip > > domain>>;tag=514a90c3-13c4-7a70a-1de331c0-5e4f..To: "701"<sip:701@<sip > > domain>>;tag=as60ebd3fc..Call-ID: > > 1064dc44-514a90c3-13c4-7a70a-1de331be-529@<ip > > <mailto: 1064dc44-514a90c3-13c4-7a70a-1de331be-529@%3Cip> > > client>..CSeq: 1 INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK, > > CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NO > > TIFY..Contact: <sip:701@<ip asterisk>>..Content-Type: > > application/sdp..Content-Length: 188....v=0..o=root 26276 26276 IN IP4 > > <ip asterisk>..s=session..c=IN IP4 > > <ip asterisk>..t=0 0..m=audio 13434 RTP/AVP 0 8..a=rtpmap:0 > > PCMU/8000..a=rtpmap:8 PCMA/8000..a=silenceSupp:off - - - -.. > > # > > > > > > > > > > > > 2006/9/21, Daniel-Constantin Mierla <daniel(a)voice-system.ro > > <mailto:daniel@voice-system.ro>>: > > > > Hello, > > > > watch the network traffic with ngrep on your sip server. You can > > see the > > call flow which may help to identify the issue. You can paste it > > to the > > list and someone may give you hints. > > > > Cheers, > > Daniel > > > > > > On 09/21/06 12:28, Arne Van Theemsche wrote: > > > hi > > > > > > my users subscribe with openser, en asterisk is used as > connectivity > > > to pstn > > > > > > i am now installing a mediaproxy, for all users, so every call > goes > > > via a mediaproxy. > > > > > > I'm doing this as follows (relevant statements only) > > > > > > in route > > > > > > #I installed the t_on_reply here to be sure that every > reply > > > gets parsed, but normally in the INVITE section should be enough? > > > t_on_reply("1"); > > > > > > if (method==INVITE) { > > > use_media_proxy(); > > > } > > > > > > > > > onreply_route[1] { > > > log(-3,"reply received"); > > > if (!search("^Content-Length:[ ]*0")) { > > > log(-3,"using mediaproxy"); > > > use_media_proxy(); > > > }; > > > } > > > > > > > > > the weird is, for all local users, this works fine, but as soon as > > > > asterisk is involved, the reply doesn't get triggered (not > > seeing the > > > "reply received" either, only when disconnecting the call). The > call > > > get's established fine, asterisk is sending media to the > > mediaproxy, > > > but the SDP towards the calling phone is not modified (since the > > > onreply isn't triggered) > > > > > > am I missing something here? > > > > > > thanks > > > Arne > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)openser.org <mailto:Users@openser.org> > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > >

1 0

[Users] How do I see who is registered?
by Ronald Wiplinger 25 Sep '06

25 Sep '06

I am watching openserctl moni to see what happens, but more than that 5 people are registered I cannot see. How do I see who is registered? bye Ronald

2 1

[serusers] Openser Admin Login Access
by John Shellhouse 24 Sep '06

24 Sep '06

Hi All, I am sure I must be missing something just not sure what it is. I granted the permission in mysql: GRANT ALL ON openser.* TO 'openser'@'dbhost' IDENTIFIED BY 'openserrw'; as stated in the Install guide and then launched the server from terminal with ./script/server and in the browser typed: http://myomain:3000 which displayed the login page. I then typed into the login:password area openser:openserrw But I was unsuccessful each time. Does anyone have any idea what I am missing or doing incorrectly? Thank you. jwshel

2 2

[serusers] Openser Admin Login Access
by John Shellhouse 23 Sep '06

23 Sep '06

Hi All, I accessed the login/password area but I am erroring but don't know how to fix. I granted all: GRANT ALL ON openser.* TO 'openser'@'dbhost' IDENTIFIED BY 'openserrw'; and changed the database.yml to dbhost as well which allowed me to login when I left it the same as localhost I was not able to login at all with default password. Now that I am in the login zone, I get this error: Mysql::Error in LoginController#login Unknown MySQL server host 'dbhost' (1) RAILS_ROOT: script/../config/.. Application Trace | Framework Trace | Full Trace /usr/local/lib/ruby/gems/1.8/gems/activerecord-1.14.4/lib/active_record/connection_adapters/mysql_adapter.rb:330:in `real_connect' /usr/local/lib/ruby/gems/1.8/gems/activerecord-1.14.4/lib/active_record/connection_adapters/mysql_adapter.rb:330:in `connect' /usr/local/lib/ruby/gems/1.8/gems/activerecord-1.14.4/lib/active_record/connection_adapters/mysql_adapter.rb:87:in `initialize' /usr/local/lib/ruby/gems/1.8/gems/activerecord-1.14.4/lib/active_record/connection_adapters/mysql_adapter.rb:36:in `mysql_connection' Plus more, but I did not want to paste it all. Any help appreciated. jwshel

1 0

[Users] Trusted IP examples
by ram 23 Sep '06

23 Sep '06

Hi iam trying to test trusted IP kind of setup I have openser server connect to my ITSP another Office i have OpenSER, i want to connect to main Server and send the calls out could some one give me examples or docs where i can find similar kind of real world examples Ram

2 1

[Users] The correct hardware request
by Earley Scripts 23 Sep '06

23 Sep '06

Being very interested in SIP Routers and SIP Softphones is is an obvious step to SIP Servers etc. Having found OpenSER on the Web I have decided that I should at least get a system that I can run locally to use for testing kit and to demonstart to whomever the potential of SIP communication. I realise that I need a "server" and a Linux OS to run on I would be obliged if someone could advise the most reasonable lump of Hardware to use by giving a indication of say type of Processor and Memory requirements. I have to hand a Chassis that has a AMD K6-2 350 Mhz processor and 106 Meg of memory. I do also have a another chassis with a AMD K6-2 550 Mhz Processor and 256 Meg of Memory but that currently runs a test version of XP . I realise that Linus is required can anybody suggest which "version" of Linux has had the best success with OpenSER as I would like to avoid as much as possible the need to interact to much with the OS so I can concentrate on the Application more. In anticipation .................thanks Paul Coenraats Data Communications Consultant

2 1

[Users] which web GUI interface good for openser 1.1.x?
by Steve Xu 23 Sep '06

23 Sep '06

Hi All, I want a web GUI interface to do configuration, adding users. etc. Which addon is good for openser 1.1.x ? Thanks, Steve

3 2

RE: [Users] compiling OpenSER on Solaris 10 x86
by peter.3.edwards＠bt.com 23 Sep '06

23 Sep '06

> I'm having a lot of difficulty compiling OpenSER on Solaris > 10. Firstly > I was missing a lot of packages which I needed to download from > sunfreeware.com (gcc, ld) the /usr/bin/ccs version of make > does not work > on the makefile > so I'm kindda stuck, it's apparently been compiled on the x68 s10 > platform before so there must be some sort of makefile modifications I > must make everywhere ? > > Anyone know what may be going on? I was hoping there would be > a package > OpenSER version for solaris built somewhere :S > > Thanks! > Nick Hi, Nick. All the pre-requisites to build the default OpenSER 1.1.0 under Solaris are available on the Sun Software Companion CD which is supplied with Solaris. These packages are also available for download from Sun's website: http://www.sun.com/software/solaris/freeware/ Off the top of my head, I think I installed these packages from the Solaris 9 Software Companion CD: Application/Editors - GNU sed v3.02 Application/Utilities - GNU text file processing utilities v2.0 Development/Languages - gcc-3.3.2 - GNU bison v1.35 - GNU flex v2.54 Development/Tools - GNU make utility v3.80 Although there may be a few others I've forgotten or already had installed, for use with other software. The only pieces of non-Sun software I had to install were OpenSSL 0.7 and MySQL's libmysqlclient (which requires you to compile MySQL from scratch - as it's not included with the Solaris pkg supplied by MySQL), both of which are optional when it comes to compiling OpenSER. Everything should work OK, if you're using the requirements as specified on the install page though you may also want to look at a trio of bugs I raised in OpenSER's Tracker system regarding some Solaris-compability issues with a couple of OpenSER's shell scripts, in case they haven't been fixed in the release you're using: [1544112] Solaris openser.init script error [1540132] Solaris openserctl.base script error [1540127] Solaris openserctl.fifo script error I believe the last two at least have been fixed in CVS, but they might not have made it into the latest released package yet. HTH, Peter. -- This Personal email contains my own opinions, sent In Confidence and does not represent the views of British Telecommunications plc. __________________________________________________________________ British Telecommunications plc Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no. 1800000 This electronic message contains information from British Telecommunications plc which may be privileged and confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by telephone or email (to the number or address above) immediately. Activity and use of the British Telecommunications plc email system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system will also be monitored and may be recorded to secure effective operation and for other lawful business purposes.

1 0

[Serusers] forward service with avpops
by Rosario Pingaro 23 Sep '06

23 Sep '06

I am starting to implement the forward capability using avpops module. Before to start I would like to know if it is possible to bill the forwarded call directly to the forwader (the destination of the first call). We account our call using radius, Wiil be possible to see the forwarded call like originated from the forwarder from accounting point of view? If I am wrong what is the good method to bill the forwarded call to the forwarder? Regards Rosario

1 0

[Users] ngrep explanation please
by Ronald Wiplinger 23 Sep '06

23 Sep '06

I have a softphone (eyebeam at 7211) and I try to call a hard phone at 7112. Eyebeam shows after the phone rang: Call failed: Media negotiation failed. I have set-up both for voice: G711u and video: h264. Can you please brief explain me what I see with: ngrep -d any -qt port 5060 (output is below)? (brief) and where do I get a detail information for it? and what could be the problem, what could be a possible solution? thanks for your help! bye Ronald U 2006/09/18 09:52:11.253462 192.168.250.108:43854 -> 192.168.250.41:5060 INVITE sip:7112@192.168.250.41 SIP/2.0..Via: SIP/2.0/UDP 192.168.250.108:43854;bran ch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543-;rport..Max-Forwards: 70..Contact: <si p:7211@192.168.250.108:43854>..To: "7112"<sip:7112@192.168.250.41>..From: "Ronald-t aipei @ video "<sip:7211@192.168.250.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmN kMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE , REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..Content-Type: application/sdp..User-Agen t: eyeBeam release 1004p stamp 31962..Content-Length: 785....v=0..o=- 2 2 IN IP4 19 2.168.250.108..s=CounterPath eyeBeam 1.5..c=IN IP4 192.168.250.108..t=0 0..m=audio 11588 RTP/AVP 107 100 106 6 0 105 18 3 5 101..a=alt:1 2 : 1HNRF2W7 lFCxbz3O 5.32.86 .166 11588..a=alt:2 1 : wmC2UUv5 SDteeaPr 192.168.250.108 11588..a=fmtp:18 annexb=n o..a=fmtp:101 0-15..a=rtpmap:107 BV32/16000..a=rtpmap:100 SPEEX/16000..a=rtpmap:106 SPEEX-FEC/16000..a=rtpmap:105 SPEEX-FEC/8000..a=rtpmap:101 telephone-event/8000..a =sendrecv..a=x-rtp-session-id:D08BC9B4AF734681A0D89918C35B13C3..m=video 62096 RTP/A VP 125..a=alt:1 2 : JXP4adeI lQwRBdzZ 5.32.86.166 62096..a=alt:2 1 : hh2NmIOI MdCTT UEJ 192.168.250.108 62096..a=fmtp:125 profile-level-id=42e015; max-br=4000; max-mbp s=19800..a=rtpmap:125 H264/90000..a=sendrecv..a=x-rtp-session-id:8178D81F66DF4316AA D51ABF209E1157.. U 2006/09/18 09:52:11.271928 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP 192.168.250.10 8:43854;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543-;rport=43854..To: "7112"<s ip:7112@192.168.250.41>..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41>;ta g=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE.. Server: OpenSer (1.1.0-notls (x86_64/linux))..Content-Length: 0..Warning: 392 192.1 68.250.41:5060 "Noisy feedback tells: pid=31767 req_src_ip=192.168.250.108 req_src _port=43854 in_uri=sip:7112@192.168.250.41 out_uri=sip:7112@192.168.250.116:5060 vi a_cnt==1".... U 2006/09/18 09:52:11.271969 192.168.250.41:5060 -> 192.168.250.116:5060 INVITE sip:7112@192.168.250.116:5060 SIP/2.0..Record-Route: <sip:192.168.250.41;lr= on;ftag=85349c3f>..Via: SIP/2.0/UDP 192.168.250.41;branch=z9hG4bK2a6b.b6ab15e2.0..V ia: SIP/2.0/UDP 192.168.250.108:43854;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87 543-;rport=43854..Max-Forwards: 69..Contact: <sip:7211@192.168.250.108:43854>..To: "7112"<sip:7112@192.168.250.41>..From: "Ronald-taipei @ video "<sip:7211@192.168.25 0.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE , INFO..Content-Type: application/sdp..User-Agent: eyeBeam release 1004p stamp 3196 2..Content-Length: 785..P-hint: usrloc applied....v=0..o=- 2 2 IN IP4 192.168.250.1 08..s=CounterPath eyeBeam 1.5..c=IN IP4 192.168.250.108..t=0 0..m=audio 11588 RTP/A VP 107 100 106 6 0 105 18 3 5 101..a=alt:1 2 : 1HNRF2W7 lFCxbz3O 5.32.86.166 11588. .a=alt:2 1 : wmC2UUv5 SDteeaPr 192.168.250.108 11588..a=fmtp:18 annexb=no..a=fmtp:1 01 0-15..a=rtpmap:107 BV32/16000..a=rtpmap:100 SPEEX/16000..a=rtpmap:106 SPEEX-FEC/ 16000..a=rtpmap:105 SPEEX-FEC/8000..a=rtpmap:101 telephone-event/8000..a=sendrecv.. a=x-rtp-session-id:D08BC9B4AF734681A0D89918C35B13C3..m=video 62096 RTP/AVP 125..a=a lt:1 2 : JXP4adeI lQwRBdzZ 5.32.86.166 62096..a=alt:2 1 : hh2NmIOI MdCTTUEJ 192.168 .250.108 62096..a=fmtp:125 profile-level-id=42e015; max-br=4000; max-mbps=19800..a= rtpmap:125 H264/90000..a=sendrecv..a=x-rtp-session-id:8178D81 U 2006/09/18 09:52:11.281432 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 100 Trying..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=85 349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-ID : Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 19 2.168.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0/ UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport =43854..Contact: <sip:7112@192.168.250.116:5060>..Record-Route: <sip:192.168.250.41 ;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:11.785445 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0 /UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rpor t=43854..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Reco rd-Route: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:11.785662 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=4385 4..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Record-Rou te: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:12.287448 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0 /UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rpor t=43854..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Reco rd-Route: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:12.287785 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=4385 4..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Record-Rou te: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:13.287502 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0 /UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rpor t=43854..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Reco rd-Route: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:13.287742 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=4385 4..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Record-Rou te: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:15.287590 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0 /UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rpor t=43854..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Reco rd-Route: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:15.287803 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 180 Ringing..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=8 5349c3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-I D: Zjk4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 1 92.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=4385 4..Require: 100rel..RSeq: 441..Contact: <sip:7112@192.168.250.116:5060>..Record-Rou te: <sip:192.168.250.41;ftag=85349c3f>..Content-Length:0.... U 2006/09/18 09:52:17.801707 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 200 OK..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=85349c 3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-ID: Zj k4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 192.16 8.250.41 ;received=192.168.250.41 ;branch=z9hG4bK2a6b.b6ab15e2.0..Via: SIP/2.0/UDP 192.168.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=438 54..Contact: <sip:7112@192.168.250.116:5060>..Record-Route: <sip:192.168.250.41;fta g=85349c3f>..Content-Type: application/SDP..Content-Length:95....v=0..o=wintech 506 1 5071 IN IP4 192.168.250.116..s=ssss-name..c=IN IP4 192.168.250.116..t=0 0.. U 2006/09/18 09:52:17.801935 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 200 OK..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=85349c 3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-ID: Zj k4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 1 INVITE..Via: SIP/2.0/UDP 192.16 8.250.108:43854 ;branch=z9hG4bK-d87543-aa3e232283193c6d-1--d87543- ;rport=43854..Co ntact: <sip:7112@192.168.250.116:5060>..Record-Route: <sip:192.168.250.41;ftag=8534 9c3f>..Content-Type: application/SDP..Content-Length:95....v=0..o=wintech 5061 5071 IN IP4 192.168.250.116..s=ssss-name..c=IN IP4 192.168.250.116..t=0 0.. U 2006/09/18 09:52:18.006466 192.168.250.108:43854 -> 192.168.250.41:5060 ACK sip:192.168.250.41;ftag=85349c3f SIP/2.0..Via: SIP/2.0/UDP 192.168.250.108:4385 4;branch=z9hG4bK-d87543-fc36ee32f92f8656-1--d87543-;rport..Max-Forwards: 70..Route: <sip:7112@192.168.250.116:5060>..Contact: <sip:7211@192.168.250.108:43854>..To: "7 112"<sip:7112@192.168.250.41>;tag=0-13c4-9122d-236f034a-80b..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxOD c3MDVmNjJlOWIyYTc...CSeq: 1 ACK..User-Agent: eyeBeam release 1004p stamp 31962..Con tent-Length: 0.... U 2006/09/18 09:52:18.006478 192.168.250.108:43854 -> 192.168.250.41:5060 BYE sip:192.168.250.41;ftag=85349c3f SIP/2.0..Via: SIP/2.0/UDP 192.168.250.108:4385 4;branch=z9hG4bK-d87543-d52beb5db212b556-1--d87543-;rport..Max-Forwards: 70..Route: <sip:7112@192.168.250.116:5060>..Contact: <sip:7211@192.168.250.108:43854>..To: "7 112"<sip:7112@192.168.250.41>;tag=0-13c4-9122d-236f034a-80b..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxOD c3MDVmNjJlOWIyYTc...CSeq: 2 BYE..User-Agent: eyeBeam release 1004p stamp 31962..Rea son: SIP;description="Application Rejected Sdp(usually no common codec)"..Content-L ength: 0.... U 2006/09/18 09:52:18.006887 192.168.250.41:5060 -> 192.168.250.116:5060 ACK sip:7112@192.168.250.116:5060 SIP/2.0..Record-Route: <sip:192.168.250.41;lr=on; ftag=85349c3f>..Via: SIP/2.0/UDP 192.168.250.41;branch=z9hG4bK2a6b.b6ab15e2.2..Via: SIP/2.0/UDP 192.168.250.108:43854;branch=z9hG4bK-d87543-fc36ee32f92f8656-1--d87543 -;rport=43854..Max-Forwards: 69..Contact: <sip:7211@192.168.250.108:43854>..To: "71 12"<sip:7112@192.168.250.41>;tag=0-13c4-9122d-236f034a-80b..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxODc 3MDVmNjJlOWIyYTc...CSeq: 1 ACK..User-Agent: eyeBeam release 1004p stamp 31962..Cont ent-Length: 0..P-hint: rr-enforced.... U 2006/09/18 09:52:18.007147 192.168.250.41:5060 -> 192.168.250.116:5060 BYE sip:7112@192.168.250.116:5060 SIP/2.0..Record-Route: <sip:192.168.250.41;lr=on; ftag=85349c3f>..Via: SIP/2.0/UDP 192.168.250.41;branch=z9hG4bKf96b.03d4bda5.0..Via: SIP/2.0/UDP 192.168.250.108:43854;branch=z9hG4bK-d87543-d52beb5db212b556-1--d87543 -;rport=43854..Max-Forwards: 69..Contact: <sip:7211@192.168.250.108:43854>..To: "71 12"<sip:7112@192.168.250.41>;tag=0-13c4-9122d-236f034a-80b..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41>;tag=85349c3f..Call-ID: Zjk4YjVjZDczYzQyNmNkMzgxODc 3MDVmNjJlOWIyYTc...CSeq: 2 BYE..User-Agent: eyeBeam release 1004p stamp 31962..Reas on: SIP;description="Application Rejected Sdp(usually no common codec)"..Content-Le ngth: 0..P-hint: rr-enforced.... U 2006/09/18 09:52:18.039998 192.168.250.116:5060 -> 192.168.250.41:5060 SIP/2.0 200 OK..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=85349c 3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-ID: Zj k4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 2 BYE..Via: SIP/2.0/UDP 192.168.2 50.41 ;received=192.168.250.41 ;branch=z9hG4bKf96b.03d4bda5.0..Via: SIP/2.0/UDP 192 .168.250.108:43854 ;branch=z9hG4bK-d87543-d52beb5db212b556-1--d87543- ;rport=43854. .Content-Length:0.... U 2006/09/18 09:52:18.040200 192.168.250.41:5060 -> 192.168.250.108:43854 SIP/2.0 200 OK..From: "Ronald-taipei @ video "<sip:7211@192.168.250.41> ;tag=85349c 3f..To: "7112"<sip:7112@192.168.250.41> ;tag=0-13c4-9122d-236f034a-80b..Call-ID: Zj k4YjVjZDczYzQyNmNkMzgxODc3MDVmNjJlOWIyYTc...CSeq: 2 BYE..Via: SIP/2.0/UDP 192.168.2 50.108:43854 ;branch=z9hG4bK-d87543-d52beb5db212b556-1--d87543- ;rport=43854..Conte nt-Length:0.... U 2006/09/18 09:52:20.758052 192.168.250.108:43854 -> 192.168.250.41:5060 .... U 2006/09/18 09:52:30.491226 192.168.250.116:5060 -> 192.168.250.41:5060 REGISTER sip:192.168.250.41:5060 SIP/2.0..From: <sip:7112@testdomain.com> ;tag=0-13 c4-91241-236f4e52-101..To: <sip:7112@testdomain.com>..Call-ID: 0-13c4-4-1316-362a.. CSeq: 3106 REGISTER..Via: SIP/2.0/UDP 192.168.250.116:5060 ;branch=z9hG4bK-91241-23 6f4e52-6ba6..Max-Forwards: 70..Contact: <sip:7112@192.168.250.116:5060>;expires=720 0..Content-Length:0.... U 2006/09/18 09:52:30.491441 192.168.250.41:5060 -> 192.168.250.116:5060 SIP/2.0 200 OK..From: <sip:7112@testdomain.com> ;tag=0-13c4-91241-236f4e52-101..To: <sip:7112@testdomain.com>;tag=329cfeaa6ded039da25ff8cbb8668bd2.d9ec..Call-ID: 0-13 c4-4-1316-362a..CSeq: 3106 REGISTER..Via: SIP/2.0/UDP 192.168.250.116:5060 ;branch= z9hG4bK-91241-236f4e52-6ba6..Contact: <sip:7112@192.168.250.116:5060>;expires=7200. .Server: OpenSer (1.1.0-notls (x86_64/linux))..Content-Length: 0..Warning: 392 192. 168.250.41:5060 "Noisy feedback tells: pid=31768 req_src_ip=192.168.250.116 req_sr c_port=5060 in_uri=sip:192.168.250.41:5060 out_uri=sip:192.168.250.41:5060 via_cnt= =1"....

4 3

[Users] Problem in TLS testing with minisip. Please help..Please...
by Ferianto siregar 23 Sep '06

23 Sep '06

Dear all, Thank you very much for this chance. Thank you. I am sorry, I have some questions. Can I ask you, Please? 1. All, I have build openser server with TLS support. I use openser-1.1.0-tls Now, I tried to test it by making a call by using softphone that supported TLS. Based on the suggestion from this forum, for testing it, I can use minisip. I have configured minisip like the installation note that I got when download it. But, I have a problem. I have error when running minisip and make a call in Windows XP. This is the error message : Starting MiniSIP ... welcome! libmutil: setupDefaultSignalHandling: No stack trace signal handler available Initializing NetUtil Creating SipSoftPhoneConfiguration init 1/9: Creating timeout provider init 2/9: Creating GUI Creating GTK GUI Setting contact db Thread 2 running - doing initParseConfig init 3/9: Parsing configuration file () WARNING: Could not determine home directory Config file version checked ok! SipIdentity::SipIdentity : cretated identity id=1 SipIdentity::setSipUri: sipUsername=<aldi> sipDomain=<pcr.ac.id> SipIdentity::setSipProxy: autodetect is false; userUri=aldi(a)pcr.ac.id; transport = UDP; proxyAddr=sip.pcr.ac.id; proxyPort=5060 SipProxy:setProxy(str) : addr = sip.pcr.ac.id SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Identities: identity=1; username=aldi; domain=pcr.ac.id proxy=[proxyString=sip.pcr.a c.id; proxyString=sip.pcr.ac.id; port=5060; transport=UDP; autodetect=no; user=a ldi; password=aldi; expires=1000]; isRegistered=0 init 4/9: Creating IP provider Adapter Name: {DAF8C45E-7B2A-4D08-98AA-5E5091C3464D} Adapter Name: {6FFFD1E7-4BC6-426E-929D-E8292B7FC0DB} Adapter Name: {B926ACA5-8120-42A4-BAD7-AE95AA6708F0} SimpleIPProvider: localIp = SimpleIPProvider: preferred network interface = {DAF8C45E-7B2A-4D08-98AA-5E5091C 3464D} SimpleIPProvider: preferred interface found Minisip is using IP = 202.95.149.5 init 5/9: Creating MediaHandler Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 init 6/9: Creating MSip SIP stack init 7/9: Connecting GUI to SIP logic init 8.2/9: Starting TCP transport worker thread init 9/9: Registering Identities to registrar server Registering user aldi(a)pcr.ac.id to proxy sip.pcr.ac.id, requesting domain pcr.ac .id IP4Address(string): sip.pcr.ac.id (202.95.149.251) IP4Address(string): sip.pcr.ac.id (202.95.149.251) IP4Address(string): sip.pcr.ac.id (202.95.149.251) Before new mediaSession RtpReceiver:: final trying port = 34694 After new mediaSession Before addDialog After addDialog Before handleCommand After handleCommand Session::getSdpOffer: v=0 o=- 3344 3344 IN IP4 202.95.149.5 s=Minisip Session c=IN IP4 202.95.149.5 t=0 0 m=audio 34694 RTP/AVP 0 101 a=rtpmap:0 PCMU/8000/1 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 IP4Address(string): sip.pcr.ac.id (202.95.149.251) ERROR:(in IP6Address) Unknown host: <pcr.ac.id> What`s wrong? I have tried to analyze it, but I still do not understand about the error message. I do hope anybody can give me a suggestion. Please help me..Please. 2. In order minisip can use TLS, I have loaded a certificate from "certificate settings" menu. What kind of certificate that I have to load? Where I can load the certificate? Does it means the certificate that I use in openser.cfg? tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" I mean, Do I have to copy user-cert.pem, user-privkey.pem, user-calist.pem to Client computer (using Windows XP), and load it by using "certificate setting" menu in minisip? Maybe my question is too much. I am sorry for that. I do hope anybody can give me a suggestion. Please help...this newbie one..Please... Thank you very much, Regards, Ferianto Note : Here is my openser.cfg file: debug=4 fork=no log_stderror=yes listen=200.95.149.251 # put your openserver IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" fifo_mode=0666 alias="pcr.ac.id" tls_port_no=5061 # uncomment the following lines for TLS support disable_tls = 0 listen = tls:200.95.149.251:5061 tls_verify_client = on tls_require_client_certificate = on tls_verify_server=on tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "s:inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); return; }; if (uri==myself) { if (method=="ACK") { route(6); return; } else if (method=="CANCEL") { route(3); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "Uopenser Not Found"); return; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("pcr.ac.id","subscriber")) { www_challenge("pcr.ac.id","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (nat_uac_test("19")) { setflag(6); } #if (!allow_trusted() && nat_uac_test("19")) { # setflag(6); #} lookup("aliases"); if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("pcr.ac.id","subscriber")) { proxy_challenge("pcr.ac.id","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (uri=~"^sip:9[0-9]*@") { route(4); return; }; if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); return; }; sl_send_reply("404", "Uopenser Not Found"); return; }; if (method=="CANCEL") { route(1); return; } if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { if(isflagset(6)) { unforce_rtp_proxy(); } sl_reply_error(); }; } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("200.95.149.254:5060"); # INOPENSERT YOUR PSTN GATEWAY IP ADDRESS # avp_write("i:45", "inv_timeout"); #if (!allow_trusted() && isflagset(6)) { if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:\ +0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out. --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

1 0

[Users] Problem in TLS testing with minisip. Please help..Please...
by Ferianto siregar 23 Sep '06

23 Sep '06

Dear all, Thank you very much for this chance. Thank you. I am sorry, I have some questions. Can I ask you, Please? 1. All, I have build openser server with TLS support. I use openser-1.1.0-tls Now, I tried to test it by making a call by using softphone that supported TLS. Based on the suggestion from this forum, for testing it, I can use minisip. I have configured minisip like the installation note that I got when download it. But, I have a problem. I have error when running minisip and make a call in Windows XP. This is the error message : Starting MiniSIP ... welcome! libmutil: setupDefaultSignalHandling: No stack trace signal handler available Initializing NetUtil Creating SipSoftPhoneConfiguration init 1/9: Creating timeout provider init 2/9: Creating GUI Creating GTK GUI Setting contact db Thread 2 running - doing initParseConfig init 3/9: Parsing configuration file () WARNING: Could not determine home directory Config file version checked ok! SipIdentity::SipIdentity : cretated identity id=1 SipIdentity::setSipUri: sipUsername=<aldi> sipDomain=<pcr.ac.id> SipIdentity::setSipProxy: autodetect is false; userUri=aldi(a)pcr.ac.id; transport = UDP; proxyAddr=sip.pcr.ac.id; proxyPort=5060 SipProxy:setProxy(str) : addr = sip.pcr.ac.id SipIdentity::setProxy: manual sipproxy success ... SipIdentity::setProxy: else ... Identities: identity=1; username=aldi; domain=pcr.ac.id proxy=[proxyString=sip.pcr.a c.id; proxyString=sip.pcr.ac.id; port=5060; transport=UDP; autodetect=no; user=a ldi; password=aldi; expires=1000]; isRegistered=0 init 4/9: Creating IP provider Adapter Name: {DAF8C45E-7B2A-4D08-98AA-5E5091C3464D} Adapter Name: {6FFFD1E7-4BC6-426E-929D-E8292B7FC0DB} Adapter Name: {B926ACA5-8120-42A4-BAD7-AE95AA6708F0} SimpleIPProvider: localIp = SimpleIPProvider: preferred network interface = {DAF8C45E-7B2A-4D08-98AA-5E5091C 3464D} SimpleIPProvider: preferred interface found Minisip is using IP = 202.95.149.5 init 5/9: Creating MediaHandler Sound I/O: using Spatial Audio Mixer Adding audio codec: G.711 init 6/9: Creating MSip SIP stack init 7/9: Connecting GUI to SIP logic init 8.2/9: Starting TCP transport worker thread init 9/9: Registering Identities to registrar server Registering user aldi(a)pcr.ac.id to proxy sip.pcr.ac.id, requesting domain pcr.ac .id IP4Address(string): sip.pcr.ac.id (202.95.149.251) IP4Address(string): sip.pcr.ac.id (202.95.149.251) IP4Address(string): sip.pcr.ac.id (202.95.149.251) Before new mediaSession RtpReceiver:: final trying port = 34694 After new mediaSession Before addDialog After addDialog Before handleCommand After handleCommand Session::getSdpOffer: v=0 o=- 3344 3344 IN IP4 202.95.149.5 s=Minisip Session c=IN IP4 202.95.149.5 t=0 0 m=audio 34694 RTP/AVP 0 101 a=rtpmap:0 PCMU/8000/1 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 IP4Address(string): sip.pcr.ac.id (202.95.149.251) ERROR:(in IP6Address) Unknown host: <pcr.ac.id> What`s wrong? I have tried to analyze it, but I still do not understand about the error message. I do hope anybody can give me a suggestion. Please help me..Please. 2. In order minisip can use TLS, I have loaded a certificate from "certificate settings" menu. What kind of certificate that I have to load? Where I can load the certificate? Does it means the certificate that I use in openser.cfg? tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" I mean, Do I have to copy user-cert.pem, user-privkey.pem, user-calist.pem to Client computer (using Windows XP), and load it by using "certificate setting" menu in minisip? Maybe my question is too much. I am sorry for that. I do hope anybody can give me a suggestion. Please help...this newbie one..Please... Thank you very much, Regards, Ferianto Note : Here is my openser.cfg file: debug=4 fork=no log_stderror=yes listen=200.95.149.251 # put your openserver IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" fifo_mode=0666 alias="pcr.ac.id" tls_port_no=5061 # uncomment the following lines for TLS support disable_tls = 0 listen = tls:200.95.149.251:5061 tls_verify_client = on tls_require_client_certificate = on tls_verify_server=on tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "s:inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); return; }; if (uri==myself) { if (method=="ACK") { route(6); return; } else if (method=="CANCEL") { route(3); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "Uopenser Not Found"); return; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("pcr.ac.id","subscriber")) { www_challenge("pcr.ac.id","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (nat_uac_test("19")) { setflag(6); } #if (!allow_trusted() && nat_uac_test("19")) { # setflag(6); #} lookup("aliases"); if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("pcr.ac.id","subscriber")) { proxy_challenge("pcr.ac.id","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (uri=~"^sip:9[0-9]*@") { route(4); return; }; if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); return; }; sl_send_reply("404", "Uopenser Not Found"); return; }; if (method=="CANCEL") { route(1); return; } if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { if(isflagset(6)) { unforce_rtp_proxy(); } sl_reply_error(); }; } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("200.95.149.254:5060"); # INOPENSERT YOUR PSTN GATEWAY IP ADDRESS # avp_write("i:45", "inv_timeout"); #if (!allow_trusted() && isflagset(6)) { if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:\ +0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out. --------------------------------- All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.

1 0

[Users] how to change password of user openser in openser1.1.0
by Steve Xu 23 Sep '06

23 Sep '06

Hi Folks, I am need to openser and download the openser1.1.0 to try on. How to change the default password 'openserrw' for user 'openser' when openser 1.10 connected to MySQL 5 plus? /usr/local/sbin/openser_mysql.sh has the default password 'openserrw' however openselctl will give me error "cannot connecte to database server" if I changed the default password. Is it hard coded? Where should I change it after the default installation. Any help will be appreciated. Steve

2 1

[Serusers] Documentation of What's New in 0.10
by Greger V. Teigre 23 Sep '06

23 Sep '06

Hi guys! We have started a documentation effort for 0.10 to document what has been changed and what is now in the upcoming release. http://www.iptel.org/ser/doc/010whatsnew There is already quite some content there, but it is by no means finished. If you have experiences with 0.10 (current CVS head), please feel free to add your experiences where appropriate (if you create a new page, use Book as type and find What's new in the Parent dialog). All: Add comments if there are some things you would like to have documented. Regardless of which version of SER you are using or planning to use, I believe this document will be of interest to you: http://www.iptel.org/ser/howtos/optimizing_the_use_of_rtp_proxy g-)

4 4

[Serusers] RE: Back to Back INVITE?
by xwang＠cascotec.com 23 Sep '06

23 Sep '06

Hello I have SER and RTPPROXY installed. Everything works fine till we debug a softphone. I use SPA3000 to dial, the receiver is a softphone. The softphone registers correctly. When dialing from SPA, here is the handshaking sequence SPA3000 -- INVITE --><-- TRYING SER -- INVITE -- INVITE --><--TRYING RING softphone. There is a back-to-back INVITE sent out immediately by SER to the softphone. I don't see those sequence to call other UAs. Does anyone know why SER sends two INVITE? Thanks! Steven

2 1

[Users] ACC module - important changes
by Bogdan-Andrei Iancu 22 Sep '06

22 Sep '06

Hi everybody, I just commited on the CVS a grand ACC restructuring and clean-up. Here is form commit log: - simplify internal logic for preparing and message selection - more efficient data collection - eliminate the FMT-based accounting; instead of it, a default set of basic values are all the time accounted; for more, extra accounting should be used -> this leads to a more selective / flexible / performant accounting - pre-builds sets of names / columns / RADIUS AVPs / DIAMETER AVPs instead of doing it each time a request is accounted - "n/a" string for not found/available values replaced with empty string "" - eliminated a lot of un-necessary functions - heritage from the all TM callback design (pre pre-transaction transaction) - DB accounting table redesigned - accounting logic separated in a new file for a better modularity. - implemented an accounting environment for storing data; helps in reducing the number of function's parameters and of internal functions; more important, useless conversions from str to int and to int again are eliminated The most important change was the drop of FMTs for a more flexible system: have a basic set of values used of call matching, plus the usage of extra accounting for anything more. The basic set is defined to : method name From URI From TAG To URI To TAG CallID Cseqno Reply code Reply reason Time stamp having a timestamp generated by the proxy instead by the backend (syslog, RADIUS server, SQL server) is important as it is more accurate - the delays due transport to the backend server are eliminated. Also the time is logged in UNIX timestamp format to avoid confusions about timezones. From how to use it (enabling acc via flags), nothing changed :)..only some module parameters were lost. For more details, please see: http://openser.org/docs/modules/1.2.x/acc.html any feedback is welcomed regards, bogdan

1 0

Re: [Users] Checking for Digit Length
by Mark Kent 22 Sep '06

22 Sep '06

> Basically I am trying to find out a way of checking for minimum and > maximum digit length dialled by our users, in order to filter some > of the traffic through our OpenSER server. Dialling rules aside, is > there a way? Unless I missed it, no one told the guy what he needs to know. Instead, he is pointed at a lengthy specification for posix regular expressions. I know there is value in teaching a guy to fish, but at some point someone has to just answer the question... This if (uri=~"sip:[0-9]{10,24}") { ... } will match a sequence of digits between 10 and 24 in length (inclusive). Now, the above is not a great test in practice. I don't know how long the longest number can be outside the North American Numbering plan (where it is relatively easy: 1-NXX-NXX-XXXX, see nanpa.com). And there are restrictions on the first few digits that you might want to check, depending on where you are in the world. I'm sure that someone reading this list has already got the ultimate, global, number checker coded for openser... it's just a question of whether they'll cough it up in public. -mark

2 1

[Serusers] Active Session Count in RTPProxy
by Gaurav Kulshreshtha 22 Sep '06

22 Sep '06

Is it possible in someway to extract the actual number of active sessions in RTP Proxy. There is sessions_created variable but its a cumulative count of sessions created. Gaurav

1 0

[Users] compiling OpenSER on Solaris 10 x86
by Nick De Cristofaro 22 Sep '06

22 Sep '06

I'm having a lot of difficulty compiling OpenSER on Solaris 10. Firstly I was missing a lot of packages which I needed to download from sunfreeware.com (gcc, ld) the /usr/bin/ccs version of make does not work on the makefile here is the error: bash-3.00# make make: Fatal error in reader: Makefile.sources, line 18: Unexpected end of line seen I looked in the file but I don't see how it would complaing of some unexpected end of line. I then followed to try GNU's make I downloaded. and then I get an error on the /usr/bin/ccs/lex and yacc's (it mentioned to use yacc and not bison) the error was: bash-3.00# /usr/local/bin/make all yacc -d -b cfg cfg.y conflicts: 1 shift/reduce lex cfg.lex "cfg.lex":line 102: Error: missing translation value make: *** [lex.yy.c] Error 1 Then I decided to try flex instead of lex. bash-3.00# /usr/local/bin/make all yacc -d -b cfg cfg.y conflicts: 1 shift/reduce flex cfg.lex flex: fatal internal error, exec failed make: *** [lex.yy.c] Broken Pipe make: *** Deleting file `lex.yy.c' so I'm kindda stuck, it's apparently been compiled on the x68 s10 platform before so there must be some sort of makefile modifications I must make everywhere ? Anyone know what may be going on? I was hoping there would be a package OpenSER version for solaris built somewhere :S Thanks! Nick

1 1

[Users] Local authentication
by Artur Hayne 22 Sep '06

22 Sep '06

Hello, Can I authenticate the openser locally? I want the user that do local login (in the computer of the server) can be authenticate in openser server. Its possible? Thanks. --------------------------------- Yahoo! Search Música para ver e ouvir: You're Beautiful, do James Blunt

2 1

[Users] rtpproxy bridge mode with multiple handsets per extension
by David Carter 22 Sep '06

22 Sep '06

Good afternoon, I have a small openser test rig with rtpproxy running as a bridge between two networks: rtpproxy -l <public IP>/<private IP> -s /tmp/rtpproxy.sock This works well apart from one issue. I have set up two handsets for an extension, one on the public network and one on the private network. The idea is to provide one phone in the office and one at home, so I can pick up at either location when someone calls. If I call the extension both handsets ring correctly, but audio is only set up correctly for one of the two handsets when I pick up. Everything works fine if both phones are on the public or the private network. I infer that this is because primitives working on the ruri and friends: avp_write("$ruri/domain", "i:20"); only work on the address of the first registered handset that they find, even if lookup("location") has created multiple branches. Does anyone have any ideas or workarounds which would allow me to set up multiple handsets for a given extension when bridge mode is involved? I tried abusing the aliases table to redirect an incoming call onto multiple SIP URIs. It looks like rtpproxy indexes by Call-ID, and hence struggles with multiple branches which share a single Call-ID. Thanks, -- David Carter Email: David.Carter(a)ucs.cam.ac.uk University Computing Service, Phone: (01223) 334502 New Museums Site, Pembroke Street, Fax: (01223) 334679 Cambridge UK. CB2 3QH.

1 0

[Serusers] Re: Re: Using IP address as domain
by mukesh 22 Sep '06

22 Sep '06

Hi andrey, I have made suggested changes in ser.cfg as follows listen=202.87.x.x alias=202.87.x.x and did #export SIP_DOMAIN=202.87.x.x I get following log when try to start SER #/etc/rc.id/init.d/ser start ------------log starts here-------------------- Starting ser: 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing textops - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 Listening on udp: 202.87.x.x [202.87.x.x]:5060 tcp: 202.87.x.x [202.87.x.x]:5060 Aliases: *: 202.87.x.x:* 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) ERROR: udp_init: bind(6, 0x810237c, 16) on 202.87.x.x: Cannot assign requested address [FAILED] ------------log ends here---------------------- please advice. Regards Mukesh From: "Andrey Kuprianov" <andrey.kouprianov(a)gmail.com> Subject: Re: [Serusers] Using IP address as domain To: serusers(a)iptel.org Message-ID: <ab5f5bda0609210935y71edb46ci6ea9966b170e52de(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi, AFAIK, SIP_DOMAIN you need to export anyway.. Just put your IP instead of the name. Then this SIP_DOMAIN will be used to properly add contacts to your subscriber table. So, if your domain is an IP address, newly added ppl will have an IP instead of domain for their host part of URI. Try also to specify alias as you IP address, i.e. listen="202.x.x.x" alias="202.x.x.x" You may also try to add a domain entry to the domain table with serctl (that is if you use functions in your config such as "is_uri_host_local()"), i.e. serctl domain add 202.x.x.x Hope it will work for you. Andrey. On 9/20/06, mukesh <mukesh(a)hungama.com> wrote: > Hi friends, > I have SER (with database support) running on my linux box. But I do > not have a domain name registered for the IP of this machine but it does > have a public IP (202.87.xx.xxx) address which allows me access it from > outside. > > If I try to access (using sipsak client) a uri from local system it > fails. > example URIs I am trying are ... > sip:mukesh@<public ip> > sip:mukesh@<public ip>:5060 > > ...with no result :( > > I referred http://mit.edu/sip/sip.edu/ser.shtml to configure my > ser.cfg. > > So the question is How can I connect to SER using IP and do I need > to use "# export SIP_DOMAIN=<public ip>"? > > Regards > Mukesh

1 0

[Serusers] Re: Re: Using IP address as domain
by mukesh 22 Sep '06

22 Sep '06

Hi andrey, I have made follwing changes in ser.cfg listen="202.87.x.x" alias="202.87.x.x" #export SIP_DOMAIN = 202.87.x.x when I run # /etc/rc.d/init.d/ser restart I get this log ----------------------log starts here ------------------------- Starting ser: 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing textops - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 Listening on udp: 202.87.x.x [202.87.x.x]:5060 tcp: 202.87.x.x [202.87.x.x]:5060 Aliases: *: 202.87.x.x:* 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) ERROR: udp_init: bind(6, 0x810237c, 16) on 202.87.x.x: Cannot assign requested address [FAILED] [root@oradb1 /]# ----------------------log ends here ------------------------- Regards Mukesh From: "Andrey Kuprianov" <andrey.kouprianov(a)gmail.com> Subject: Re: [Serusers] Using IP address as domain To: serusers(a)iptel.org Message-ID: <ab5f5bda0609210935y71edb46ci6ea9966b170e52de(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi, AFAIK, SIP_DOMAIN you need to export anyway.. Just put your IP instead of the name. Then this SIP_DOMAIN will be used to properly add contacts to your subscriber table. So, if your domain is an IP address, newly added ppl will have an IP instead of domain for their host part of URI. Try also to specify alias as you IP address, i.e. listen="202.x.x.x" alias="202.x.x.x" You may also try to add a domain entry to the domain table with serctl (that is if you use functions in your config such as "is_uri_host_local()"), i.e. serctl domain add 202.x.x.x Hope it will work for you. Andrey. On 9/20/06, mukesh <mukesh(a)hungama.com> wrote: > Hi friends, > I have SER (with database support) running on my linux box. But I do > not have a domain name registered for the IP of this machine but it does > have a public IP (202.87.xx.xxx) address which allows me access it from > outside. > > If I try to access (using sipsak client) a uri from local system it > fails. > example URIs I am trying are ... > sip:mukesh@<public ip> > sip:mukesh@<public ip>:5060 > > ...with no result :( > > I referred http://mit.edu/sip/sip.edu/ser.shtml to configure my > ser.cfg. > > So the question is How can I connect to SER using IP and do I need > to use "# export SIP_DOMAIN=<public ip>"? > > Regards > Mukesh

1 0

RE: [Serusers] SIPP with SER
by Verbeiren, David 22 Sep '06

22 Sep '06

> Hello , > > has anyone any experience on testing SER with SIPP ?? > > I've sent the following mail to sipp-users mailing list, I'm sending it > also here, in case anyone has any idea or experience. This may not be exactly what you want to test but I've done tests with SIPp and various SIP proxies, SER being one of them, by targeting the UAS itself on the SIPp command line but with a "remote sending address" parameter specifying the proxy to use. This works great and does not require the 'service' user to be known to SER as it simply looks at the hostname (or ip address) part of the URI to proxy the call. This gives the following modified command lines: UAC : ./sipp -sn uac 2.2.2.2 -r 1 -m 1 -d 5000 -i 1.1.1.1 -rsa 3.3.3.3 UAS : ./sipp -sn uas -rsa 3.3.3.3 The remote sending address is similar to the "outbound proxy" parameter found on many SIP phones. This way of running SIPp gives the call flow you describe but shortcuts most of the ser.cfg routing logic as uri!=myself. Regards, -David

2 1

[Serusers] problem connecting two asterisk servers through SER
by Sameer Ahmed 22 Sep '06

22 Sep '06

Hi We have two asterisks registered as UA's. SER is acting as a proxy server. We want to make calls between two asterisk users through SER. One asterisk server has extensions starting with 2, and the other one has extensions starting with 4. We route the calls based on the first digit. We are unable to call from an extension on one asterisk server to the other asterisk server. "rewritehostport" doesn't seem to be doing the trick for us. Does anyone have a solution? Below is our ser.cfg file: =====================SER.CFG===================== # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines for debugging */ #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 fifo_db_url="mysql://ser:heslo@192.168.1.60 /ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if(method == "INVITE") { if (uri =~ "sip:2[0-9]{3}@*"){ log(1, "Forwarding to PakVista BlueFlash\n"); route(2); break; } else if (uri =~ "sip:4[0-9]{3}@*"){ log(1, "Forwarding to MyRoom BlueFlash\n"); route(3); break; } } log(1, "After INVITE\n"); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); log(1, "After REGISTER\n"); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { log(1,"Inside NOT uri==myself \n"); # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { log(1, "Inside uri==myself\n"); if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("192.168.1.60", "subscriber")) { www_challenge(" 192.168.1.60", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { log(1, "location Not Found\n"); sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { log(1, "Inside route 1\n"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } route[2] { log(1, "Inside route 2\n"); rewritehostport("192.168.1.61:5060"); if (!t_relay()) { log(1, "t_relay error\n"); sl_reply_error(); }; log(1, "Leaving route 2\n"); } route[3] { log(1, "Inside route 3\n"); rewritehostport("192.168.1.62"); if (!t_relay()) { log(1, "t_relay error\n"); sl_reply_error(); }; #forward(uri:host, uri:port); log(1, "Leaving route 3\n"); ===============================EOF========================

1 0

[Serusers] some error messages
by jorain 22 Sep '06

22 Sep '06

Hi all, Did anyone have encountered these error codes? Error: str2i(AmUtils.cpp:149):str2i:unexpected char R in RTP/AVP 97409 Error: parse_sdp_media(AmSdp.cpp:549)while parsing 'm=audio' line Error: 400 session description parsing failed. pthread_detach failed with code EINVAL:thread already in detached state Error: reply(AmRequest.cpp:335):AmRequestUAS::reply:400 fifo_t_reply:to-ta expected Error: writeToBuffer(IsdnCapiConnection.cpp:544):Warning:dropping data, try increase AUDIO_BUFFER_LEN... Error: changeSIPState(IsdnCall.cpp:339):unhandled SIP state transition(inbound) from (DISCONNECTED|DISCONNECTED) to (CONNECTED|DISCONNECTED) Thanks Regards, jorain

2 1

Re: [Users] serweb: DB.php is missing on my system
by Ferianto siregar 22 Sep '06

22 Sep '06

Dear Roland, I think that DB.php is missing, So, you need DB.php packet. You can download it from http://pear.php.net For the installation, you can type # pear <name of the packet> There is also many tutorials about it in that web. I do hope this can help you. :) Thank you Regards, Ferianto Message: 4 Date: Fri, 22 Sep 2006 07:43:16 +0800 From: Ronald Wiplinger Subject: [Users] serweb: DB.php is missing on my system To: Openser Message-ID: <45132394.8040309(a)elmit.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed [Fri Sep 22 06:54:42 2006] [error] [client 192.168.250.108] PHP Warning: require_once(DB.php) [href='function.require-once'>function.require-once]: failed to open stream: No such file or directory in /srv/www/serweb/html/main_prepend.php on line 38 [Fri Sep 22 06:54:42 2006] [error] [client 192.168.250.108] PHP Fatal error: require_once() [href='function.require'>function.require]: Failed opening required 'DB.php' (include_path='.:/usr/share/php5:/usr/share/php5/PEAR') in /srv/www/serweb/html/main_prepend.php on line 38 # locate DB.php /usr/share/php5/PEAR/PEAR/DependencyDB.php How can I get it? In the meantime I have tried to turn off loging in config.php: $config->enable_loging = false; $config->log_file = "/var/log/serweb"; but get still the same error. SuSE 10.1 installed pear5 (there is no 'pear') # pear5 list Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.1 stable Console_Getopt 1.2 stable PEAR 1.4.6 stable # pear5 list-all PHP Fatal error: Allowed memory size of 8388608 bytes exhausted (tried to allocate 8208 bytes) in /usr/share/php5/PEAR/PEAR/Registry.php on line 1048 What do I need to do? bye Ronald ------------------------------ _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users End of Users Digest, Vol 16, Issue 54 ************************************* --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

1 0

[Users] TLS problem : May I ask you again..Please....
by Ferianto siregar 22 Sep '06

22 Sep '06

Dear all, First I would like to say thanks to every body in this forum. Thank you very much.. All, I am sorry for my message again. Sorry for the long message. I am in rush and panic. I have read the instruction in tls.htm about TLS configuration many times. But, Untill now, I can not build it. Maybe because of my lack understanding and skill. When I run "netstat -anp|grep 5061", I got this output message : [root@localhost root]# netstat -anp|grep 5061 tcp 0 0 202.95.149.251:5061 0.0.0.0:* LISTEN 5099/openser [root@localhost root]# netstat -anp|grep 5060 tcp 0 0 202.95.149.251:5060 0.0.0.0:* LISTEN 5099/openser udp 0 0 202.95.149.251:5060 0.0.0.0:* 5099/openser From the output, I can see that the port 5061 (for TLS) can be loaded. But, why when I run "ngrep -d any...", there is no port 5061? Here is the output U 202.95.149.3:5060 -> 202.95.149.251:5060 .. #### T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] POST / HTTP/1.1.. ## T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] Content-Length: 220.. ## T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] Content-Type: application/ipp.. ## T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] Host: localhost.. ## T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] .. ## T 127.0.0.1:32804 -> 127.0.0.1:631 [AP] ........ ## T 127.0.0.1:631 -> 127.0.0.1:32804 [AP] HTTP/1.1 200 OK.. # T 127.0.0.1:631 -> 127.0.0.1:32804 [AP] Date: Fri, 22 Sep 2006 08:10:21 GMT.. ## T 127.0.0.1:631 -> 127.0.0.1:32804 [AP] Server: CUPS/1.1..Connection: Keep-Alive..Keep-Alive: timeout=60..Content-Language: C..Content-Type: application/ipp; ch arset=iso-8859-1..Content-Length: 81.............G..attributes-charset..utf-8H..attributes-natural-language..en-us.utf-8 . What should I do? Please help me..Please give me a suggestion. These are the tasks that I have done before : 1. I have added in DNS Records : pcr.ac.id IN NAPTR 50 50 "s" "SIPS+D2T" "" _sips._tcp.pcr.ac.id. pcr.ac.id IN NAPTR 60 40 "s" "SIP+D2T" "" _sip._tcp.pcr.ac.id. pcr.ac.id IN NAPTR 60 60 "s" "SIP+D2U" "" _sip._udp.pcr.ac.id 2. Here is my openser.cfg configuration : debug=9 fork=no log_stderror=yes listen=202.95.149.251 # put your openserver IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" fifo_mode=0666 alias="pcr.ac.id" tls_port_no=5061 # uncomment the following lines for TLS support disable_tls = 0 listen = tls:202.95.149.251:5061 #listen = udp:202.95.149.251:5060 tls_verify_client = on tls_require_client_certificate = on tls_verify_server=on tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "s:inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); return; }; if (uri==myself) { if (method=="ACK") { route(6); return; } else if (method=="CANCEL") { route(3); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "Uopenser Not Found"); return; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("pcr.ac.id","subscriber")) { www_challenge("pcr.ac.id","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (nat_uac_test("19")) { setflag(6); } #if (!allow_trusted() && nat_uac_test("19")) { # setflag(6); #} lookup("aliases"); if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("pcr.ac.id","subscriber")) { proxy_challenge("pcr.ac.id","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (uri=~"^sip:9[0-9]*@") { route(4); return; }; if (uri!=myself) { route(5); route(1); return; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); return; }; sl_send_reply("404", "Uopenser Not Found"); return; }; if (method=="CANCEL") { route(1); return; } if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { if(isflagset(6)) { unforce_rtp_proxy(); } sl_reply_error(); }; } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("202.95.149.254:5060"); # INOPENSERT YOUR PSTN GATEWAY IP ADDRESS # avp_write("i:45", "inv_timeout"); #if (!allow_trusted() && isflagset(6)) { if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:\ +0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } What should I add in openser.cfg? Please help..Please.. Thank you very much, Regards, Ferianto --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail.

1 0

[Serusers] Call btn two SIP Servers -Thanks
by Sharon Abraham 22 Sep '06

22 Sep '06

Hi guys, Could final get the call thru both the SER poxies. Thanks for all the tips. Sharon Abraham Network Engineer Afila Tech India (p) Ltd www.afila.com

1 0

[Serusers] How to configure multi-domain?
by Ricardo Carvalho 22 Sep '06

22 Sep '06

I've added the following lines to my ser.cfg file: ################### modparam("usrloc", "use_domain", 1) #If the domain part of the user should be also saved and used for identifing the user (along with the username part). Useful in multi domain scenarios. Non 0 value means true. modparam("registrar", "use_domain", 1) # If set to 1 then the registrar will use username@domain as address of record. If the variable is set to 0 then only username will be used as the address of record. Default value is 0. ################### I've added 2 diferent domains to the domain table, and got different phones registered with those different domains. Although, after editing that way ser.cfg file, my phones still register in Ser, but none of them can call any other, even if I call someone only by username or by username@domain. Am I in the right path to configure a multi-domain Ser server? What else should I do to make things work fine? Regards, Ricardo.

5 13

Re: [Serusers] RTP being sent to wrong port
by Jiri Kuthan 22 Sep '06

22 Sep '06

The client should be then fixed or exchanged. It is not yet a BCP RFC or so, but it should be soon. In the meantime it is just an informal but important practice to build clients in a symmetric way. I'm actually aware of few that are not build this way. -jiri At 18:12 20/09/2006, Andrey Kuprianov wrote: >Just looked up the code to make sure... :) It's definitely assymetric! >Thanks Vamsi!!! > >On 9/20/06, Vamsi Pottangi <vamsipottangi(a)gmail.com> wrote: >> >>Symmetric client uses the same port to send and receive messages. >> >> >>On 9/20/06, Andrey Kuprianov <andrey.kouprianov(a)gmail.com > wrote: >>> Forgive my ignorance. I know the term "symmetric client", but i dont >>> really know what that means. Can u please explain or just give me some >>> doc/rfc to read? :) >>> >>> Andrey. >>> >>> On 9/20/06, Vamsi Pottangi < vamsipottangi(a)gmail.com> wrote: >>> > >>> > Is your application symmetric? >>> > >>> > >>> > On 9/20/06, Andrey Kuprianov < andrey.kouprianov(a)gmail.com> wrote: >>> > > >>> > Hi, >>> > >>> > Im facing this problem for a few days already. Hope someone might have >>> > an idea or two. It's a long email too, btw. >>> > >>> > Im testing my app behind NAT's with SER-0.9.6 + mediaproxy + Asterisk >>> > (conf server). While X-Lite works *fine* and I get 2 way audio always, >>> > my app seems to have some kind of weird bug and I end up with 1 way >>> > audio stream. >>> > >>> > Here's the thing. Application starts receiver and transmitter on >>> > completely different ports. Here's SDP for remote and local machines >>> > (public IP's been x'ed by myself, of course): >>> > >>> > This one's sent in INVITE message to SER ==> >>> > 69563 DEBUG media.MediaManager - Local SDP: (this one's from local >>machine) >>> > v=0 >>> > o=xps 1158739216750 1158739216757 IN IP4 192.168.1.3 >>> > s=MC >>> > c=IN IP4 192.168.1.3 >>> > t=0 0 >>> > m=audio 25000 RTP/AVP 0 8 >>> > a=rtpmap:0 PCMU/8000 >>> > a=rtpmap:8 PCMA/8000 >>> > a=sendrecv >>> > >>> > This one's sent with 200 OK from SER ==> >>> > 69563 DEBUG media.MediaManager - Remote SDP: >>> > v=0 >>> > o=root 2500 2500 IN IP4 203.159.x.x >>> > s=session >>> > c=IN IP4 203.159.x.x >>> > t=0 0 >>> > m=audio 30004 RTP/AVP 0 8 >>> > a=rtpmap:0 PCMU/8000 >>> > a=rtpmap:8 PCMA/8000 >>> > a=silenceSupp:off - - - - >>> > >>> > The further log shows that transmitters and receivers have started on >>> > the proper IP/port ==> >>> > >>> > 69594 DEBUG media.AVReceiver - Start listening for RTP @ addr: >>> > 192.168.1.3 port: 25000 ttl: 1 >>> > 69657 DEBUG media.AVTransmitter - Created transmitter for: >>> > [203.159.x.x] at ports: [30004] encoded as: [[ULAW/rtp, alaw]] >>> > 69657 DEBUG media.MediaManager - Starting transmission >>> > 69672 DEBUG media.AVTransmitter - Track 0 is set to transmit as: >>> > ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits >>> > 69860 INFO media.AVTransmitter - Binded to port 30004 >>> > 69875 DEBUG media.AVTransmitter - Started transmitting track 0 encoded >>> > as ULAW/rtp @ [203.159.x.x]:30004 >>> > >>> > Nevertheless, the Ethereal capture shows that mediaproxy sends the >>> > stream NOT to port 25000 (local port), but to port 30004 (remote >>> > port)!! Why? This is not the case with X-Lite, however. Xlite captures >>> > show that streams are sent to proper ports always. Btw, Im attaching >>> > SIP+RTP Ethereal captures with this mail. Please, take a look. >>> > >>> > I also want to mention, that this doesnt happen with my app. for all >>> > the NATed nets. In some nets it works fine, but not in this one. Just >>> > weird. >>> > >>> > Please, let me know if anyone has ideas or hints regarding this nonsence >>:) >>> > >>> > Bests, >>> > >>> > Andrey. >>> > >>> > >>> > _______________________________________________ >>> > Serusers mailing list >>> > Serusers(a)lists.iptel.org >>> > http://lists.iptel.org/mailman/listinfo/serusers >>> > >>> > >>> > >>> > >>> > >>> _______________________________________________ >>> Serusers mailing list >>> Serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >>> >> >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

2 1

[Serusers] List of Routing functions/commands
by Sameer Ahmed 22 Sep '06

22 Sep '06

Hi Where can I get a list (with description) of all the routing functions/commands that can be used in ser.cfg? Thank you. Regards, Sameer

2 1

[Serusers] Scaling SER
by Jon Farmer 22 Sep '06

22 Sep '06

Hi I currently have a single SER server using MySQL for data storage. Due to the number of users I now have and to help redundancy I want to setup another SER server. I have search the web and have not been able to find a tutorial on this so I hope someone on this list can help. I need the SER servers to at least know about the location of clients registered with each server. Therefore can I point both servers at the same MySQL and for them to share the data? Are there any issues around this strategy? Is there another way to accomplish what I want? Regards Jon -- Jon Farmer Telford, Shropshire, UK

8 17

[Serusers] STUN characteristics
by sip 22 Sep '06

22 Sep '06

I'm doing an experiment with our userbase at the moment, making some modifications to allow more users to register than who'd been allowed to register before (to minimise the amount of bandwidth we need to use for our services, we are trying to absolutely minimise the number of users that require the use of an RTPproxy, since, in a userbase of 100,000 users, this can be rather pricey if there are too many of them which require it). We used to not allow anyone with a contact header that was NOT a public IP address to register onto the system, with the assumption that they could use STUN and it SHOULD rewrite the contact header. This assumption has proven to be... optimistic. Several of the UAs we see show radically different characteristics during this 'open' trial, and I'm not sure if they're just differing STUN versions or if our users simply can't follow the install/configure instructions. SO... my question becomes: what are the characterstics of functioning STUN implementations and how they should overwrite contact/via/sdp headers for the UA's messages? Most every one of the STUN implementations I've seen rewrites the Contact header and the data inside the O and C lines in the SDP header. Most of them seem to overwrite the Via headers with valid information as well, although not all of them do. What are some other things I should be looking for? I'm trying to essentially test for a particular variant of STUN, allowing users who've at least followed the instructions to the letter to have working and usable clients (perhaps using RTP proxy where needed) while not allowing users who're still attempting to use private IPs for everything to waste our bandwidth because they're not following the instructions or they're using a UA that is, in effect, broken in its implementation. This is a lot more complex than it sounds, I know, but I think if I have more data to work with, I might be able to come up with a more acceptable scenario than we currently employ. N.

4 4

[Serusers] SIPP with SER
by Kostas Marneris 21 Sep '06

21 Sep '06

Hello , has anyone any experience on testing SER with SIPP ?? I've sent the following mail to sipp-users mailing list, I'm sending it also here, in case anyone has any idea or experience. ---------------------------------------------------------------------------------------------------- Hello all, I run the basic UAC senario in Host A (1.1.1.1) and the basic UAS senario in Host B (2.2.2.2). I have a SER SIP Proxy in the middle (3.3.3.3). UAC : ./sipp -sn uac -r 1 -m 1 -d 5000 -i 1.1.1.1 3.3.3.3 UAS : ./sipp -sn uas SER.cfg : I use the following hack in ser.cfg, because the default user 'service' is not actually registered in Location DB. # In INVITE handler .. ... # --- SIPP hack --- if (uri =~ "^sip:service@3.3.3.3:5060") { rewritehostport("2.2.2.2:5060"); route(1); break; }; # ----------------- # In MAIN Route Block # --------------------- Nothing changed from 'default SER behaviour' : if ((method != "REGISTER") && (method != "OPTIONS")) { log(1, " Add RR"); record_route(); }; if (loose_route()) { route(1); break; }; Where is the problem : It seems that SER doesn't recognize (in the dialog) the ACK sent by the UAC (Host A), do does not relay it to the UAS. The UAS continues to send '200 OK'... so I can't make it to have a 'full call setup simulation senario'. Call Flow : HOST A (UAC) SER HOST B (UAS) -----------> (1) INVITE <----------- (2) 100 Trying --------------> (3) INVITE <------------- (4) 180 Ringing <----------- (5) 180 Ringing <------------- (6) 200 OK <----------- (7) 200 OK -----------> (8) ACK <------------- (9) 200 OK -----------> (10) ACK .... .... The first ACK (8) from UAC to SER doesn't relayed to UAS, so UAS keeps sending '200 OK'... This ACK doesn't go through the 'loose_route()' block because SER thinks that this ACK is not in the dialog. Even if I add the following code in MAIN route block, SER insists to absorb this ACK request. ... } else if (method == "ACK") { # ACK mesgs --> route[1] log(1," * ACK -- not in the DIALOG --"); route(1); break; } else if ... Do you find something wrong in SER conf ? or do you have any idea why this happening ? ---------------------------------------------------------------------------------------------------- thanks in advance for any hint. Kostas

2 1

[Users] redundancy
by Ramin Dousti 21 Sep '06

21 Sep '06

Hi, A SIP INVITE to sip.mydoamin.com with sip.mydomain.com having two A-RR's, must be forwarded to the first IP and if that IP is unreachable then to the second IP. How can I achieve this? My first problem is that I seem to not have the list of the two IP's available to me via a configuration key-word. So I need to hardcode the IP's in my conf file. My second problem is I don't know how to iterate over these two IP's. Maybe I can use t_on_failure() and have the second IP processed in the failure_route[]. But then again, how can I distinguish between a timeout and a legitimate failure? Thank you in advance, -- Ramin

4 6

[Users] AcctSessionTime (table radacct)
by Alberto Pacifico 21 Sep '06

21 Sep '06

Hi all, I'd like to get AcctSessionTime (db radius /table radacct) with setflag(). I´ve already got the AcctStartTime and AcctStopTime. The values of AcctSessionTime that I´ve got are zero in the calls. I know that I can calculate the duration of the call using the values of AcctStartTime and AcctStopTime, but I'm using an software (CDRTool) that uses the values of AcctSessionTime to calculate the duration of the call. How can I get the value of AcctSessionTime (diferent of zero)? Thanks Alberto __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Users] Q:ABOUT:Use the source IP address
by Alejandro Sanchez 21 Sep '06

21 Sep '06

Hello. I need tell to OPENSER that use the source IP address of the NAT/Firewall as the return address instead of the contact information in the SIP message. Someone knos How? Thank's. ___________________________________________________________ Do You Yahoo!? La mejor conexión a Internet y <b >2GB</b> extra a tu correo por $100 al mes. http://net.yahoo.com.mx

2 1

[Serusers] Using IP address as domain
by mukesh 21 Sep '06

21 Sep '06

Hi friends, I have SER (with database support) running on my linux box. But I do not have a domain name registered for the IP of this machine but it does have a public IP (202.87.xx.xxx) address which allows me access it from outside. If I try to access (using sipsak client) a uri from local system it fails. example URIs I am trying are ... sip:mukesh@<public ip> sip:mukesh@<public ip>:5060 ...with no result :( I referred http://mit.edu/sip/sip.edu/ser.shtml to configure my ser.cfg. So the question is How can I connect to SER using IP and do I need to use "# export SIP_DOMAIN=<public ip>"? Regards Mukesh

2 1

[Users] Configurable nathelper nortpproxy string
by Jeremie Le Hen 21 Sep '06

21 Sep '06

Hi list, I have made a small patch to the nathelper module, that allows to configure the "a=nortpproxy:yes\r\n" string. Basically, as noticed in user documentation, you can add this to your configuration file, once the patch is applied and OpenSER recompiled : % modparam("nathelper", "nortpproxy_str", "a=sdpmangled:yes") I needed to do this because I have the following setup: SoftPhone1_ \____ ____NATing Proxy_______Registrar Proxy_______(outside) _/ SoftPhone2 For some reason, the registrar also uses nathelper/rtpproxy. I first used the "f" flag for force_rtp_proxy() in my NATing proxy, in order to circumvent the nortpproxy flag that the registrar proxy has set. This worked perfectly except if softphone1 tries to call softphone2. In this case my NATing proxy would replace the SDP twice. With my patch, I simply turn the nortpproxy string to something else that only my NATing proxy cares about. Please, commit it if you find it worth enough. Thank you. Best regards, -- Jeremie Le Hen < jeremie at le-hen dot org >< ttz at chchile dot org >

2 2

[Serusers] Call btn two SIP Servers
by Sharon Abraham 21 Sep '06

21 Sep '06

The prob is pretty basic. I have installed 2 SERs and have a set of users registered to either of the proxies. How can i place a call from user1 at SER1 to user2 @ SER2? This is what i've done 1. In my "domain" table (i.e. MySQL) in both SER's I have added domain entries. 2. Then into" trusted" tables of either proxies , i've added the value of the other proxy 3. Then made the entries in the ser.cfg. But when i restart ser i get this as the error [root@localhost sbin]# service ser restart Stopping ser: [ OK ] Starting ser: ERROR: bad config file (3 errors) [FAILED] My ser.cfg of one of the Proxies is as follows... can anyone help??? pls? # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/xlog.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("permissions|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (method=="INVITE") { if( !allow_trusted() && !is_uri_host_local() ) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }

2 1

[Users] t_relay and DNS
by Andrew And 21 Sep '06

21 Sep '06

How is DNS resolution If I have some Openser destination and I use t_relay()? Optinos: 1 - Openser make 1 DNS query to each destination; 2 - Openser make 1 DNS query to all destination.

2 1

[Users] reinstall openser database for mysql
by Ronald Wiplinger 21 Sep '06

21 Sep '06

I copied all details during I set-up the database (with openser_mysql.sh). Unfortunately I had lost this copy and have no ideas anymore what passwords I have set-up. Which database and records do I need to delete from mysql to restart? bye Ronald

2 1

[Serusers] Can't create users using serctl
by Sharon Abraham 21 Sep '06

21 Sep '06

Hi I can't create users using serctl the command i'm using is serctl <username> <pwd> <email> the error that arises is error: 400; check if you use aliases in SER but 'm not using aliases in my SER... what could be the prob

2 1

[Serusers] DNS SRV
by Chia Huey 21 Sep '06

21 Sep '06

Hi, Is there any attribute that determine whether SER will cache DNS IP upon start up? Regards, Chia -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.5/451 - Release Date: 9/19/2006

2 3

[Serusers] RTP being sent to wrong port
by Andrey Kuprianov 21 Sep '06

21 Sep '06

Hi, Im facing this problem for a few days already. Hope someone might have an idea or two. It's a long email too, btw. Im testing my app behind NAT's with SER-0.9.6 + mediaproxy + Asterisk (conf server). While X-Lite works *fine* and I get 2 way audio always, my app seems to have some kind of weird bug and I end up with 1 way audio stream. Here's the thing. Application starts receiver and transmitter on completely different ports. Here's SDP for remote and local machines (public IP's been x'ed by myself, of course): This one's sent in INVITE message to SER ==> 69563 DEBUG media.MediaManager - Local SDP: (this one's from local machine) v=0 o=xps 1158739216750 1158739216757 IN IP4 192.168.1.3 s=MC c=IN IP4 192.168.1.3 t=0 0 m=audio 25000 RTP/AVP 0 8 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=sendrecv This one's sent with 200 OK from SER ==> 69563 DEBUG media.MediaManager - Remote SDP: v=0 o=root 2500 2500 IN IP4 203.159.x.x s=session c=IN IP4 203.159.x.x t=0 0 m=audio 30004 RTP/AVP 0 8 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=silenceSupp:off - - - - The further log shows that transmitters and receivers have started on the proper IP/port ==> 69594 DEBUG media.AVReceiver - Start listening for RTP @ addr: 192.168.1.3 port: 25000 ttl: 1 69657 DEBUG media.AVTransmitter - Created transmitter for: [203.159.x.x] at ports: [30004] encoded as: [[ULAW/rtp, alaw]] 69657 DEBUG media.MediaManager - Starting transmission 69672 DEBUG media.AVTransmitter - Track 0 is set to transmit as: ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits 69860 INFO media.AVTransmitter - Binded to port 30004 69875 DEBUG media.AVTransmitter - Started transmitting track 0 encoded as ULAW/rtp @ [203.159.x.x]:30004 Nevertheless, the Ethereal capture shows that mediaproxy sends the stream NOT to port 25000 (local port), but to port 30004 (remote port)!! Why? This is not the case with X-Lite, however. Xlite captures show that streams are sent to proper ports always. Btw, Im attaching SIP+RTP Ethereal captures with this mail. Please, take a look. I also want to mention, that this doesnt happen with my app. for all the NATed nets. In some nets it works fine, but not in this one. Just weird. Please, let me know if anyone has ideas or hints regarding this nonsence :) Bests, Andrey.

3 7

[Users] I can ping all UAC and end radius Accounting
by Jose Gil Navarrete 20 Sep '06

20 Sep '06

Hi list. In mediaproxy documentation in this section: http://openser.org/docs/modules/1.1.x/mediaproxy.html#AEN171 talk abaut ping. Can it do ping for all UAC behind or not of the NAT? If the ping not hit the UAC, Can the radius accounting ending automatically? --------------------------------- Do You Yahoo!? La mejor conexión a Internet y 2GB extra a tu correo por $100 al mes. http://net.yahoo.com.mx

1 0

[Serusers] alias/rpid instead of subscriber in acc
by Roger Lewau 20 Sep '06

20 Sep '06

I am using acc table for accounting of INVITE, BYE and CANCEL. This info is then used to create CDRs for billing. It works great with one exception. My setup is that every subsbriber account is tied to a public PSTN number. The PSTN number is set in the rpid field of subscriber table as well as stored as an alias for the subscriber account. On every call bound for pstn, I add the rpid header to provide CID for the B end of the call. Now to the strange part. I have some asterisk servers registered as ua in SER, when these servers make calls some calls get registered with a from uri that are equal to the SER account used, some calls are registered with the PSTN number as the from uri. Two consecutive calls from the same asterisk box and user to the same pstn number, can produce one of each from uri. The way I like it to be is that all calls should be registered with the SER account used. This only happens with asterisk as ua. At first, I though this could be because I set asteriskt to canreinvite=yes, but same thing happened with canreinvite=no. When is a record actually saved in acc? Anyone with an idea why this inconsistancy occurs? Some code: extract from sip.conf ========== register => 1000:1234@sip.serverhallen.com/552000; incomming [ser-out] ;outgoing calls type=peer host=sip.serverhallen.com language=se username=1000 secret=1234 fromuser=1000 insecure=very context=vbx extract from extensions.conf ======================== exten => _X.,1,DIAL(SIP/${EXTEN}@ser-out,60) from ser.cfg main route block ===================== if (method=="INVITE" || method=="BYE" || method=="CANCEL") { # enable accounting for INVITE and BYE and CANCEL messages. setflag(2); };

1 0

[serusers] SER w/Asterisk IVR
by Tracy Lofton 20 Sep '06

20 Sep '06

Hi everyone, I have integrated asterisk and openser which for the most part works great with this small exception that I am trying to get right. My problem is, I have users dial *86, *861, and *862 plus their extensions to access and utilize various different IVR of the Asterisk system which works great on SIP hardphones. However, I am having a difficult time incorporating this feature into the Linksys Pap2t-NA unit. I have changed it the .cfg file to accept just 861 and 862 for this unit, because the box does ont like the * (star dialed first), so i am trying to just use a 861 plus extension to retrieve voicemail for these units, but this is what I get from the Asterisk console: Executing Answer("SIP/31002-09d67ec8", "") in new stack -- Executing VoiceMailMain("SIP/31002-09d67ec8", "") in new stack -- Playing 'vm-login' (language 'en') Sep 20 13:24:06 WARNING[13992]: app_voicemail.c:5002 vm_authenticate: Couldn't read username -- Executing Answer("SIP/31002-09d85c30", "") in new stack -- Executing VoiceMailMain("SIP/31002-09d85c30", "") in new stack -- Playing 'vm-login' (language 'en') -- Playing 'vm-password' (language 'en') Sep 20 13:24:45 WARNING[13998]: app_voicemail.c:5034 vm_authenticate: Unable to read password -- Executing Ringing("SIP/31002-09d82da0", "") in new stack -- Executing VoiceMail("SIP/31002-09d82da0", "u31002") in new stack -- Playing 'vm-theperson' (language 'en') -- Playing 'digits/3' (language 'en') -- Playing 'digits/1' (language 'en') -- Playing 'digits/0' (language 'en') -- Playing 'digits/0' (language 'en') -- Playing 'digits/2' (language 'en') -- Playing 'vm-isunavail' (language 'en') == Spawn extension (default, 131002, 2) exited non-zero on 'SIP/31002-09d82da0' Should the spawn portion be displaying the extra "1" in front of the extension 31002? Also, is there a special area to input a password for the Pap2t via the web interface so that it is readable by Asterisk IVR system, maybe a callerID or...? Or is there some other way, I can work around this just for Linksys Pap2t users (and other ATA units) that someone is familiar with already? TIA. Tracy _________________________________________________________________ Get today's hot entertainment gossip http://movies.msn.com/movies/hotgossip

2 2

Fwd: [Users] uri:host
by Ramin Dousti 20 Sep '06

20 Sep '06

If you/someone could point me to a document as to how to manipulate the SIP header programatically, I really appreciate it. All the documents I read show to set things with static values, for example, for send or forward it shows forward("UDP:1.2.3.4:5060"), what if the decision making of what protocol/dst/port should be used is a variable that should be determined during the processing of the message itself. Let me give a concrete example: I get a message destined for user(a)somedoamin.com, I need to be able to determine the host for that domain, depending on what the host is I need to use either TCP or UDP, besides let's say, somedomain.com resolves to two IP addresses, I also need to try the first IP and if it fails (IP connectivity-wise) then I try the second one. I really appreciate any pointer/assistance. Ramin On 9/20/06, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote: > > > On 09/19/06 23:21, Ramin Dousti wrote: > > Thanks, Daniel. > > > > So according to the document forward_<proto>(host:port) becomes > > foward(proto:host:port). > > > > But how should I then create a string which replaces the argument of > > forward_tcp(uri:host): > uri:host, uri:port have been eliminated, because when you give no > parameter to forward(), same behavior happen. You can play with > rewriteuri() or setdsturi() to make combinations of how to forward the > request (or you can use avp_pushto() to achive similar results but with > more flexible parameters). > > Cheers, > Daniel

3 5

[Users] problem with mediaproxy when PSTN gateway is on a private network.
by Paolo Schiattarella 20 Sep '06

20 Sep '06

Hi all, I have a network configuration in which openSER and mediaproxy are on a machine which has a public ip address but my Asterisk PSTN gateway has a private ip address and is running on a linux-vserver. The problem is that when mediaproxy is active all my VOIP calls, internally and over the internet work perfectly but when I try to call a PSTN number it only works when mediaproxy is down. If I try to call through my PSTN gateway having mediaproxy up the softphone takes long time to setup the call and, after the remote phone rings I cannot hear any voice in both directions. I hope you will not come up with answers like "use a VPN" or "publish your PSTN gateway" ;-) Paolo. -- This is my new email address. Please update your address book.

1 0

[Serusers] newbie question ...help required ASAP
by Sharon Abraham 20 Sep '06

20 Sep '06

Hi guys, I'm really new to SER and i need this prob to be solved urgently The prob is pretty basic. I have installed 2 SERs and have a set of users registered to either of the proxies. How can i place a call from user1 at SER1 to user2 @ SER2? What all changes should i make to the ser.cfg? Do i need to use a DNS SRV? Thanks , sharon

2 7

RE: [Users] Cannot start openser 1.1
by Papadopoulos Georgios 20 Sep '06

20 Sep '06

Yes, I want TCP support, so I would like to avoid disabling epoll in OpenSER. I am pretty certain that epoll is not disabled in the kernel. At least that's what I see in /usr/src/linux/.config: CONFIG_EPOLL=y Below is the output of make all. There are only warnings (should they be errors?) at the linking of openser. But there is nothing at the compilation of io_wait.c and tcp_main.c. Any ideas? Thank you. George Compiling action.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c action.c -o action.o Compiling core_stats.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c core_stats.c -o core_stats.o Compiling crc.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c crc.c -o crc.o Compiling daemonize.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c daemonize.c -o daemonize.o Compiling data_lump.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c data_lump.c -o data_lump.o Compiling data_lump_rpl.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c data_lump_rpl.c -o data_lump_rpl.o Compiling dprint.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c dprint.c -o dprint.o Compiling dset.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c dset.c -o dset.o Compiling error.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c error.c -o error.o Compiling fifo_server.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c fifo_server.c -o fifo_server.o Compiling flags.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c flags.c -o flags.o Compiling forward.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c forward.c -o forward.o Compiling io_wait.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c io_wait.c -o io_wait.o Compiling ip_addr.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c ip_addr.c -o ip_addr.o Compiling items.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c items.c -o items.o Compiling items_extra.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c items_extra.c -o items_extra.o Compiling main.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c main.c -o main.o Compiling md5.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c md5.c -o md5.o Compiling md5utils.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c md5utils.c -o md5utils.o Compiling modparam.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c modparam.c -o modparam.o Compiling msg_translator.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c msg_translator.c -o msg_translator.o Compiling pass_fd.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c pass_fd.c -o pass_fd.o Compiling proxy.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c proxy.c -o proxy.o Compiling qvalue.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c qvalue.c -o qvalue.o Compiling re.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c re.c -o re.o Compiling receive.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c receive.c -o receive.o Compiling resolve.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c resolve.c -o resolve.o Compiling route.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c route.c -o route.o Compiling route_struct.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c route_struct.c -o route_struct.o Compiling script_cb.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c script_cb.c -o script_cb.o Compiling serialize.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c serialize.c -o serialize.o Compiling socket_info.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c socket_info.c -o socket_info.o Compiling sr_module.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c sr_module.c -o sr_module.o Compiling statistics.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c statistics.c -o statistics.o statistics.c:46:2: warning: #warning STATISTICS: Architecture with no support for atomic operations. Using Locks!! Compiling tcp_main.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c tcp_main.c -o tcp_main.o Compiling tcp_read.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c tcp_read.c -o tcp_read.o Compiling timer.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c timer.c -o timer.o Compiling tsend.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c tsend.c -o tsend.o Compiling udp_server.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c udp_server.c -o udp_server.o Compiling unixsock_server.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c unixsock_server.c -o unixsock_server.o Compiling usr_avp.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c usr_avp.c -o usr_avp.o Compiling mem/f_malloc.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/f_malloc.c -o mem/f_malloc.o Compiling mem/mem.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/mem.c -o mem/mem.o Compiling mem/memtest.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/memtest.c -o mem/memtest.o Compiling mem/q_malloc.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/q_malloc.c -o mem/q_malloc.o Compiling mem/shm_mem.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/shm_mem.c -o mem/shm_mem.o Compiling mem/vq_malloc.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c mem/vq_malloc.c -o mem/vq_malloc.o Compiling parser/hf.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/hf.c -o parser/hf.o Compiling parser/msg_parser.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/msg_parser.c -o parser/msg_parser.o Compiling parser/parse_allow.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_allow.c -o parser/parse_allow.o Compiling parser/parse_content.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_content.c -o parser/parse_content.o Compiling parser/parse_cseq.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_cseq.c -o parser/parse_cseq.o Compiling parser/parse_disposition.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_disposition.c -o parser/parse_disposition.o Compiling parser/parse_diversion.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_diversion.c -o parser/parse_diversion.o Compiling parser/parse_event.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_event.c -o parser/parse_event.o Compiling parser/parse_expires.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_expires.c -o parser/parse_expires.o Compiling parser/parse_fline.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_fline.c -o parser/parse_fline.o Compiling parser/parse_from.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_from.c -o parser/parse_from.o Compiling parser/parse_hname2.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_hname2.c -o parser/parse_hname2.o Compiling parser/parse_hostport.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_hostport.c -o parser/parse_hostport.o Compiling parser/parse_methods.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_methods.c -o parser/parse_methods.o Compiling parser/parse_nameaddr.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_nameaddr.c -o parser/parse_nameaddr.o Compiling parser/parse_param.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_param.c -o parser/parse_param.o Compiling parser/parse_refer_to.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_refer_to.c -o parser/parse_refer_to.o Compiling parser/parse_rpid.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_rpid.c -o parser/parse_rpid.o Compiling parser/parse_rr.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_rr.c -o parser/parse_rr.o Compiling parser/parse_sipifmatch.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_sipifmatch.c -o parser/parse_sipifmatch.o Compiling parser/parse_sst.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_sst.c -o parser/parse_sst.o Compiling parser/parse_supported.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_supported.c -o parser/parse_supported.o Compiling parser/parse_to.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_to.c -o parser/parse_to.o Compiling parser/parse_uri.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_uri.c -o parser/parse_uri.o Compiling parser/parse_via.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parse_via.c -o parser/parse_via.o Compiling parser/parser_f.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/parser_f.c -o parser/parser_f.o Compiling parser/digest/digest.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/digest/digest.c -o parser/digest/digest.o Compiling parser/digest/digest_parser.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/digest/digest_parser.c -o parser/digest/digest_parser.o Compiling parser/digest/param_parser.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/digest/param_parser.c -o parser/digest/param_parser.o Compiling parser/contact/contact.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/contact/contact.c -o parser/contact/contact.o Compiling parser/contact/parse_contact.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c parser/contact/parse_contact.c -o parser/contact/parse_contact.o Compiling db/db.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c db/db.c -o db/db.o Compiling db/db_fifo.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c db/db_fifo.c -o db/db_fifo.o Compiling db/db_id.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c db/db_id.c -o db/db_id.o Compiling db/db_pool.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c db/db_pool.c -o db/db_pool.o Compiling lex.yy.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c lex.yy.c -o lex.yy.o Compiling cfg.tab.c gcc -g -O9 -funroll-loops -Wall -mcpu=ultrasparc -mtune=ultrasparc -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.4"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/openser-1.1.0-notls/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c cfg.tab.c -o cfg.tab.o Linking openser gcc -Wl,-O2 -Wl,-E action.o core_stats.o crc.o daemonize.o data_lump.o data_lump_rpl.o dprint.o dset.o error.o fifo_server.o flags.o forward.o io_wait.o ip_addr.o items.o items_extra.o main.o md5.o md5utils.o modparam.o msg_translator.o pass_fd.o proxy.o qvalue.o re.o receive.o resolve.o route.o route_struct.o script_cb.o serialize.o socket_info.o sr_module.o statistics.o tcp_main.o tcp_read.o timer.o tsend.o udp_server.o unixsock_server.o usr_avp.o mem/f_malloc.o mem/mem.o mem/memtest.o mem/q_malloc.o mem/shm_mem.o mem/vq_malloc.o parser/hf.o parser/msg_parser.o parser/parse_allow.o parser/parse_content.o parser/parse_cseq.o parser/parse_disposition.o parser/parse_diversion.o parser/parse_event.o parser/parse_expires.o parser/parse_fline.o parser/parse_from.o parser/parse_hname2.o parser/parse_hostport.o parser/parse_methods.o parser/parse_nameaddr.o parser/parse_param.o parser/parse_refer_to.o parser/parse_rpid.o parser/parse_rr.o parser/parse_sipifmatch.o parser/parse_sst.o parser/parse_supported.o parser/parse_to.o parser/parse_uri.o parser/parse_via.o parser/parser_f.o parser/digest/digest.o parser/digest/digest_parser.o parser/digest/param_parser.o parser/contact/contact.o parser/contact/parse_contact.o db/db.o db/db_fifo.o db/db_id.o db/db_pool.o lex.yy.o cfg.tab.o -ldl -lresolv -o openser io_wait.o(.text+0x1044): In function `init_epoll': /usr/src/openser-1.1.0-notls/io_wait.c:201: warning: warning: epoll_create is not implemented and will always fail tcp_main.o(.text+0x3d24): In function `io_watch_add': /usr/src/openser-1.1.0-notls/io_wait.h:376: warning: warning: epoll_ctl is not implemented and will always fail tcp_main.o(.text+0x4544): In function `io_wait_loop_epoll': /usr/src/openser-1.1.0-notls/io_wait.h:701: warning: warning: epoll_wait is not implemented and will always fail > -----Original Message----- > From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > Sent: Wednesday, September 20, 2006 12:25 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] Cannot start openser 1.1 > > Hello George, > > On 09/20/06 12:11, Papadopoulos Georgios wrote: > > Hello Daniel, > > > > Thank you for the response. Which is better, disabling epoll in > > openser, or enabling epoll in the kernel? > > > enabling the poll in kernel is better because applications > can handle more than 1024 tcp connections. > > Daniel > > > George > > > > > >> -----Original Message----- > >> From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > >> Sent: Wednesday, September 20, 2006 11:40 AM > >> To: Papadopoulos Georgios > >> Cc: users(a)openser.org > >> Subject: Re: [Users] Cannot start openser 1.1 > >> > >> Seems that epoll was disabled from kernel. Is it right? > >> > >> If yes, disable epoll at compilation: > >> > >> make proper > >> NO_EPOLL=1 make all > >> NO_EPOLL=1 make install > >> > >> > >> also, there are some escape in the replacement string of > >> avp_subst() which shouldn't. > >> > >> Cheers, > >> Daniel > >> > >> > >> On 09/20/06 11:31, Papadopoulos Georgios wrote: > >> > >>> hello, > >>> > >>> After using OpenSer 1.0 successfully for about a year, I am > >>> > >> trying to > >> > >>> migrate to 1.1. My configuration has not changed (except > >>> > >> for changes > >> > >>> in the avp functions due to the new syntax). However I > >>> > >> cannot get the > >> > >>> process started. Below you can see the output that I am > getting. It > >>> seems like some poll function is missing. > >>> > >>> Any help will be very welcome. Thank you. > >>> > >>> George Papadopoulos > >>> > >>> > >>> # uname -a > >>> Linux Fury 2.6.17-gentoo-r8 #1 Fri Sep 15 16:47:15 EEST > >>> > >> 2006 sparc64 > >> > >>> sun4u TI UltraSparc II (BlackBird) GNU/Linux > >>> > >>> > >>> # > >>> 0(17608) WARNING: fix_socket_list: could not rev. resolve > >>> 172.31.100.6 > >>> 0(17608) WARNING: fix_socket_list: could not rev. resolve > >>> 172.31.100.7 > >>> 0(17608) WARNING: fix_socket_list: could not rev. resolve > >>> 172.31.100.6 > >>> 0(17608) WARNING: fix_socket_list: could not rev. resolve > >>> 172.31.100.7 Listening on > >>> udp: 172.31.100.5 [172.31.100.5]:5060 > >>> udp: 172.31.100.6 [172.31.100.6]:5060 > >>> udp: 172.31.100.7 [172.31.100.7]:5060 > >>> tcp: 172.31.100.5 [172.31.100.5]:5060 > >>> tcp: 172.31.100.6 [172.31.100.6]:5060 > >>> tcp: 172.31.100.7 [172.31.100.7]:5060 > >>> Aliases: > >>> tcp: Fury:5060 > >>> tcp: Fury.acn.gr:5060 > >>> udp: Fury:5060 > >>> udp: Fury.acn.gr:5060 > >>> *: sip.altecnet.gr:* > >>> *: altecnet.gr:* > >>> > >>> 0(17608) init_tcp: using epoll_lt as the io watch method (auto > >>> detected) > >>> 0(0) INFO: statistics manager successfully initialized > >>> 0(0) StateLess module - initializing > >>> 0(0) TM - initializing... > >>> Fury sbin # 0(0) Maxfwd module- initializing > >>> 0(0) TextOPS - initializing > >>> 0(0) AVPops - initializing > >>> 0(0) permissions - initializing > >>> 0(0) WARNING: File not found: > /usr/local/etc/ser/permissions.allow > >>> 0(0) Default allow file > (/usr/local/etc/ser/permissions.allow) not > >>> found => empty rule set > >>> 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.deny > >>> 0(0) Default deny file (/usr/local/etc/ser/permissions.deny) not > >>> found => empty rule set > >>> 0(0) AUTH module - initializing > >>> 0(0) AUTH_DB module - initializing > >>> 0(0) subst_parser: WARNING: \* unknown escape in > >>> /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > >>> 0(0) subst_parser: WARNING: \! unknown escape in > >>> /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > >>> 0(0) subst_parser: WARNING: \^ unknown escape in > >>> /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > >>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of > >>> <Remote-Party-ID> > >>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of > >>> <Remote-Party-ID> > >>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > >>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > >>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > >>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > >>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > >>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > >>> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > >>> 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > >>> 1(17622) INFO: fifo process starting: 17622 > >>> 15(17649) ERROR: init_epoll: epoll_create: Function not > implemented > >>> [90] > >>> 15(17649) ERROR: init_io_wait: epoll init failed > >>> 15(17649) ERROR: tcp_receive_loop: exiting...16(17650) ERROR: > >>> init_epoll: epoll_create: Function not implemented [90] > >>> 16(17650) ERROR: init_io_wait: epoll init failed > >>> 16(17650) ERROR: tcp_receive_loop: exiting...17(17651) ERROR: > >>> init_epoll: epoll_create: Function not implemented [90] > >>> 17(17651) ERROR: init_io_wait: epoll init failed > >>> 17(17651) ERROR: tcp_receive_loop: exiting...18(17652) ERROR: > >>> init_epoll: epoll_create: Function not implemented [90] > >>> 18(17652) ERROR: init_io_wait: epoll init failed > >>> 18(17652) ERROR: tcp_main_loop: exiting... 0(17610) child process > >>> 17649 exited normally, status=255 > >>> 0(17610) child process 17650 exited normally, status=255 > >>> 0(17610) child process 17651 exited normally, status=255 > >>> 0(17610) child process 17652 exited normally, status=255 > >>> 0(17610) INFO: terminating due to SIGCHLD > >>> 1(17622) INFO: signal 15 received > >>> 2(17623) INFO: signal 15 received > >>> 3(17624) INFO: signal 15 received > >>> 4(17625) INFO: signal 15 received > >>> 14(17648) INFO: signal 15 received > >>> 13(17642) INFO: signal 15 received > >>> 12(17641) INFO: signal 15 received > >>> 11(17640) INFO: signal 15 received > >>> 10(17639) INFO: signal 15 received > >>> 9(17638) INFO: signal 15 received > >>> 8(17632) INFO: signal 15 received > >>> 7(17631) INFO: signal 15 received > >>> 6(17630) INFO: signal 15 received > >>> 5(17629) INFO: signal 15 received > >>> > >>> Disclaimer > >>> The information in this e-mail and any attachments is > >>> > >> confidential. It is intended solely for the attention and > use of the > >> named addressee(s). If you are not the intended recipient, > or person > >> responsible for delivering this information to the intended > >> recipient, please notify the sender immediately. Unless > you are the > >> intended recipient or his/her representative you are not > authorized > >> to, and must not, read, copy, distribute, use or retain > this message > >> or any part of it. E-mail transmission cannot be guaranteed to be > >> secure or error-free as information could be intercepted, > corrupted, > >> lost, destroyed, arrive late or incomplete, or contain viruses. > >> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)openser.org > >>> http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >>> > > > > >

1 0

RE: [Users] Cannot start openser 1.1
by Papadopoulos Georgios 20 Sep '06

20 Sep '06

Hello Daniel, Thank you for the response. Which is better, disabling epoll in openser, or enabling epoll in the kernel? George > -----Original Message----- > From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > Sent: Wednesday, September 20, 2006 11:40 AM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] Cannot start openser 1.1 > > Seems that epoll was disabled from kernel. Is it right? > > If yes, disable epoll at compilation: > > make proper > NO_EPOLL=1 make all > NO_EPOLL=1 make install > > > also, there are some escape in the replacement string of > avp_subst() which shouldn't. > > Cheers, > Daniel > > > On 09/20/06 11:31, Papadopoulos Georgios wrote: > > hello, > > > > After using OpenSer 1.0 successfully for about a year, I am > trying to > > migrate to 1.1. My configuration has not changed (except > for changes > > in the avp functions due to the new syntax). However I > cannot get the > > process started. Below you can see the output that I am getting. It > > seems like some poll function is missing. > > > > Any help will be very welcome. Thank you. > > > > George Papadopoulos > > > > > > # uname -a > > Linux Fury 2.6.17-gentoo-r8 #1 Fri Sep 15 16:47:15 EEST > 2006 sparc64 > > sun4u TI UltraSparc II (BlackBird) GNU/Linux > > > > > > # > > 0(17608) WARNING: fix_socket_list: could not rev. resolve > > 172.31.100.6 > > 0(17608) WARNING: fix_socket_list: could not rev. resolve > > 172.31.100.7 > > 0(17608) WARNING: fix_socket_list: could not rev. resolve > > 172.31.100.6 > > 0(17608) WARNING: fix_socket_list: could not rev. resolve > > 172.31.100.7 Listening on > > udp: 172.31.100.5 [172.31.100.5]:5060 > > udp: 172.31.100.6 [172.31.100.6]:5060 > > udp: 172.31.100.7 [172.31.100.7]:5060 > > tcp: 172.31.100.5 [172.31.100.5]:5060 > > tcp: 172.31.100.6 [172.31.100.6]:5060 > > tcp: 172.31.100.7 [172.31.100.7]:5060 > > Aliases: > > tcp: Fury:5060 > > tcp: Fury.acn.gr:5060 > > udp: Fury:5060 > > udp: Fury.acn.gr:5060 > > *: sip.altecnet.gr:* > > *: altecnet.gr:* > > > > 0(17608) init_tcp: using epoll_lt as the io watch method (auto > > detected) > > 0(0) INFO: statistics manager successfully initialized > > 0(0) StateLess module - initializing > > 0(0) TM - initializing... > > Fury sbin # 0(0) Maxfwd module- initializing > > 0(0) TextOPS - initializing > > 0(0) AVPops - initializing > > 0(0) permissions - initializing > > 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.allow > > 0(0) Default allow file (/usr/local/etc/ser/permissions.allow) not > > found => empty rule set > > 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.deny > > 0(0) Default deny file (/usr/local/etc/ser/permissions.deny) not > > found => empty rule set > > 0(0) AUTH module - initializing > > 0(0) AUTH_DB module - initializing > > 0(0) subst_parser: WARNING: \* unknown escape in > > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > > 0(0) subst_parser: WARNING: \! unknown escape in > > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > > 0(0) subst_parser: WARNING: \^ unknown escape in > > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ > > 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of > > <Remote-Party-ID> > > 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of > > <Remote-Party-ID> > > 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > > 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > > 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > > 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > > 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > > 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > > 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 > > 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 > > 1(17622) INFO: fifo process starting: 17622 > > 15(17649) ERROR: init_epoll: epoll_create: Function not implemented > > [90] > > 15(17649) ERROR: init_io_wait: epoll init failed > > 15(17649) ERROR: tcp_receive_loop: exiting...16(17650) ERROR: > > init_epoll: epoll_create: Function not implemented [90] > > 16(17650) ERROR: init_io_wait: epoll init failed > > 16(17650) ERROR: tcp_receive_loop: exiting...17(17651) ERROR: > > init_epoll: epoll_create: Function not implemented [90] > > 17(17651) ERROR: init_io_wait: epoll init failed > > 17(17651) ERROR: tcp_receive_loop: exiting...18(17652) ERROR: > > init_epoll: epoll_create: Function not implemented [90] > > 18(17652) ERROR: init_io_wait: epoll init failed > > 18(17652) ERROR: tcp_main_loop: exiting... 0(17610) child process > > 17649 exited normally, status=255 > > 0(17610) child process 17650 exited normally, status=255 > > 0(17610) child process 17651 exited normally, status=255 > > 0(17610) child process 17652 exited normally, status=255 > > 0(17610) INFO: terminating due to SIGCHLD > > 1(17622) INFO: signal 15 received > > 2(17623) INFO: signal 15 received > > 3(17624) INFO: signal 15 received > > 4(17625) INFO: signal 15 received > > 14(17648) INFO: signal 15 received > > 13(17642) INFO: signal 15 received > > 12(17641) INFO: signal 15 received > > 11(17640) INFO: signal 15 received > > 10(17639) INFO: signal 15 received > > 9(17638) INFO: signal 15 received > > 8(17632) INFO: signal 15 received > > 7(17631) INFO: signal 15 received > > 6(17630) INFO: signal 15 received > > 5(17629) INFO: signal 15 received > > > > Disclaimer > > The information in this e-mail and any attachments is > confidential. It is intended solely for the attention and use > of the named addressee(s). If you are not the intended > recipient, or person responsible for delivering this > information to the intended recipient, please notify the > sender immediately. Unless you are the intended recipient or > his/her representative you are not authorized to, and must > not, read, copy, distribute, use or retain this message or > any part of it. E-mail transmission cannot be guaranteed to > be secure or error-free as information could be intercepted, > corrupted, lost, destroyed, arrive late or incomplete, or > contain viruses. > > > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > >

3 2

[Users] Cannot start openser 1.1
by Papadopoulos Georgios 20 Sep '06

20 Sep '06

hello, After using OpenSer 1.0 successfully for about a year, I am trying to migrate to 1.1. My configuration has not changed (except for changes in the avp functions due to the new syntax). However I cannot get the process started. Below you can see the output that I am getting. It seems like some poll function is missing. Any help will be very welcome. Thank you. George Papadopoulos # uname -a Linux Fury 2.6.17-gentoo-r8 #1 Fri Sep 15 16:47:15 EEST 2006 sparc64 sun4u TI UltraSparc II (BlackBird) GNU/Linux # 0(17608) WARNING: fix_socket_list: could not rev. resolve 172.31.100.6 0(17608) WARNING: fix_socket_list: could not rev. resolve 172.31.100.7 0(17608) WARNING: fix_socket_list: could not rev. resolve 172.31.100.6 0(17608) WARNING: fix_socket_list: could not rev. resolve 172.31.100.7 Listening on udp: 172.31.100.5 [172.31.100.5]:5060 udp: 172.31.100.6 [172.31.100.6]:5060 udp: 172.31.100.7 [172.31.100.7]:5060 tcp: 172.31.100.5 [172.31.100.5]:5060 tcp: 172.31.100.6 [172.31.100.6]:5060 tcp: 172.31.100.7 [172.31.100.7]:5060 Aliases: tcp: Fury:5060 tcp: Fury.acn.gr:5060 udp: Fury:5060 udp: Fury.acn.gr:5060 *: sip.altecnet.gr:* *: altecnet.gr:* 0(17608) init_tcp: using epoll_lt as the io watch method (auto detected) 0(0) INFO: statistics manager successfully initialized 0(0) StateLess module - initializing 0(0) TM - initializing... Fury sbin # 0(0) Maxfwd module- initializing 0(0) TextOPS - initializing 0(0) AVPops - initializing 0(0) permissions - initializing 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.allow 0(0) Default allow file (/usr/local/etc/ser/permissions.allow) not found => empty rule set 0(0) WARNING: File not found: /usr/local/etc/ser/permissions.deny 0(0) Default deny file (/usr/local/etc/ser/permissions.deny) not found => empty rule set 0(0) AUTH module - initializing 0(0) AUTH_DB module - initializing 0(0) subst_parser: WARNING: \* unknown escape in /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ 0(0) subst_parser: WARNING: \! unknown escape in /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ 0(0) subst_parser: WARNING: \^ unknown escape in /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/ 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of <Remote-Party-ID> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of <Remote-Party-ID> 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 0(0) INFO: udp_init: SO_RCVBUF is initially 118784 0(0) INFO: udp_init: SO_RCVBUF is finally 237568 1(17622) INFO: fifo process starting: 17622 15(17649) ERROR: init_epoll: epoll_create: Function not implemented [90] 15(17649) ERROR: init_io_wait: epoll init failed 15(17649) ERROR: tcp_receive_loop: exiting...16(17650) ERROR: init_epoll: epoll_create: Function not implemented [90] 16(17650) ERROR: init_io_wait: epoll init failed 16(17650) ERROR: tcp_receive_loop: exiting...17(17651) ERROR: init_epoll: epoll_create: Function not implemented [90] 17(17651) ERROR: init_io_wait: epoll init failed 17(17651) ERROR: tcp_receive_loop: exiting...18(17652) ERROR: init_epoll: epoll_create: Function not implemented [90] 18(17652) ERROR: init_io_wait: epoll init failed 18(17652) ERROR: tcp_main_loop: exiting... 0(17610) child process 17649 exited normally, status=255 0(17610) child process 17650 exited normally, status=255 0(17610) child process 17651 exited normally, status=255 0(17610) child process 17652 exited normally, status=255 0(17610) INFO: terminating due to SIGCHLD 1(17622) INFO: signal 15 received 2(17623) INFO: signal 15 received 3(17624) INFO: signal 15 received 4(17625) INFO: signal 15 received 14(17648) INFO: signal 15 received 13(17642) INFO: signal 15 received 12(17641) INFO: signal 15 received 11(17640) INFO: signal 15 received 10(17639) INFO: signal 15 received 9(17638) INFO: signal 15 received 8(17632) INFO: signal 15 received 7(17631) INFO: signal 15 received 6(17630) INFO: signal 15 received 5(17629) INFO: signal 15 received Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

Re: [Users] uri:host
by Daniel-Constantin Mierla 20 Sep '06

20 Sep '06

On 09/19/06 23:21, Ramin Dousti wrote: > Thanks, Daniel. > > So according to the document forward_<proto>(host:port) becomes > foward(proto:host:port). > > But how should I then create a string which replaces the argument of > forward_tcp(uri:host): uri:host, uri:port have been eliminated, because when you give no parameter to forward(), same behavior happen. You can play with rewriteuri() or setdsturi() to make combinations of how to forward the request (or you can use avp_pushto() to achive similar results but with more flexible parameters). Cheers, Daniel > > forward("tcp:" . uri:host . ":5060"); > > with . being the concatenation function. > > Ramin > > On 9/19/06, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote: >> Hello, >> >> there was a change in the format of forwarding functions (core and tm), >> please see: >> >> http://openser.org/dokuwiki/doku.php?id=migrating_openser_v1.0.x_to_v1.1.x >> >> >> Cheers, >> Daniel >

1 0

[Users] SER/OpenSER beer meeting in Oslo..
by Helge Waastad 20 Sep '06

20 Sep '06

I belive I'll make it... And my goal for that evening will be to see if SER-beer tastes as good as OpenSER-beer :-)....and off cource how many instances you can run...... before U're out of memory ;-) br hw -- Helge Waastad Senior Engineer Systemavdelingen Smartnet

2 1

[Serusers] Registrations behind NAT problem.
by Andrey Kuprianov 20 Sep '06

20 Sep '06

Hi, Im facing some weird problem, when users register from behind NAT. Let me try to break it down. First of all, Im using ser 0.9.6 and my configuration file is almost identical to that of mediaproxy+nat config file from getting started bundle. I have asked my friends and colleagues to test my SIP-based application behind NAT with their ADSL modems and strange thing happens: 1. While one guy (say user1) has ADSL modem, which gives him address of 192.168.0.3, he can register w/o problem. Contact header <sip:user1@192.168.0.3:5060;transport=udp>;q=1.0 is sent in REGISTER request, and received back with 200 OK as <sip:user1@192.168.0.3:5060;transport=udp>;q=1.0;expires=3600;received="sip:61.47.x.x:5060" (i have put "x" by myself) 2. Another guy (user2) has ADSL modem connected to a wireless access point. The application sends in Contact: <sip:surat@10.0.0.12:5060;transport=udp>;q=1.0 but gets back in 200 OK (attention !!!): <sip:surat@124.120.x.x:41854;transport=udp>;q=1;expires=3600;received="sip:124.120.x.x:43041" It gets Contact with a public IP back, which is not the case with user1. How come? I *wonder* why this is happening... Some kind of weird NAT? I'd really appreciate if anyone can shed some light on this issue. Bests, Andrey.

2 4

[Serusers] set_timer caller
by Gildo J. Caceres 20 Sep '06

20 Sep '06

Hi all, I have this message during SER runtime. 10(17177) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf73f01b8 7(17171) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf6186090 10(17177) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf694a60c 3(17163) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf6fe9ecc 2(17161) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf79f50c0 8(17173) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf767ed08 8(17173) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf7482294 3(17163) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf75b56c8 7(17171) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf704f65c 4(17165) WARNING: set_timer called on a "detached" timer -- ignoring: 0xf6862054 Somebody knows what means? -- Gildo Caceres

3 5

[Users] lcr gw strip and prefix
by Alan Crosswell 20 Sep '06

20 Sep '06

Does anybody have samples of using LCR strip and prefix? I've tried configuring it for an ITSP that wants US numbers to be 10-digits and international calls to be prefixed with 011. I keep these numbers in E.164 format, so, for example: +12128543754 should have the ruri rewritten to: 2128543754 and +44123456789 should become 01144123456789 Here are relevant portions of my lcr tables: lcr routes +--------------+----------+--------+----------+ | prefix | from_uri | grp_id | priority | +--------------+----------+--------+----------+ | +1__________ | % | 5 | 10 | | +1__________ | % | 7 | 20 | | +__ | % | 8 | 20 | | +__ | % | 6 | 10 | lcr gateways (edited to fit and hide details:-) +-----------+---------+------+-----+-----+--------+-------+--------+ | gw_name | ip | port | uri_| tran| grp_id | strip | prefix | +-----------+---------+------------+-----+--------+-------+--------+ | prov1-us | x.x.x.x | 5060 | 1 | 1 | 5 | 2 | | | prov1-int | x.x.x.x | 5060 | 1 | 1 | 6 | 1 | 011 | | voip1-int | y.y.y.y | 5060 | 1 | 1 | 7 | 1 | 011 | | voip1-us | y.y.y.y | 5060 | 1 | 1 | 8 | 2 | | openser.cfg snippet (our internal dialplan has 93 for outside line): xlog("L_INFO","route[4]: SIP-to-PSTN call from <$fu> to <$tu> routed\n"); if (uri=~"^sip:931") { subst_user('/^931/+1/'); # rewrite to E.164 subst('/^(To:[^0-9]*)931(.*)$/\1+1\2/'); # rewrite to E.164 } if (uri=~"^sip:93011") { subst_user('/^93011/+/'); # rewrite to E.164 subst('/^(To:[^0-9]*)93011(.*)$/\1+\2/'); # rewrite to E.164 } xlog("L_INFO","route[4]: SIP-to-PSTN r-uri is now <$ru>\n"); # rewrite callee's 5-digit extensions to +121285..... if !((isflagset(6) && !isflagset(4)) || isflagset(5)) { subst('/^(From:.*<sip:)([134][0-9]{4}@)/\1+121285\2/'); subst('/^(Remote-Party-ID:.*<sip:)([134][0-9]{4}@)/\1+121285\2/'); } t_on_failure("4"); # if gateway unavail go to 4 if (!next_gw()) { sl_send_reply("503", "Service not available - No gateways"); return; }; xlog("L_INFO","route[4]: SIP-to-PSTN after next_gw() r-uri is now <$ru>\n"); # Cookbook does a forward. I think we do a stateful t_relay which will handle # e.g. TCP/UDP or v6->v4 conversion as needed. if (isflagset(18)) { #call fwd enabled append_branch(); } if (!t_relay()) { sl_reply_error(); }; xlog("L_INFO","Fell through route[4]: $si: $rm From <$fu> To <$tu>\n"); } # end of route[4] The observed behavior is that the host part gets rewritten correctly (to x.x.x.x) but the user part does not get stripped and/or prefixed. Any help would be appreciated. /a

3 4

[Serusers] Ser STARTED, but doesn't answer to any message
by Bouslov Boris 19 Sep '06

19 Sep '06

Hello all, SER is started fine, but it looks like it doesn't react to any message arrived to it. When the SER started the debug information has following message : 0(0) DEBUG: FIFO created @ /tmp/ser_fifo 0(0) DEBUG: fifo /tmp/ser_fifo opened, mode=432 0(0) init_unixsock_socket: No unix domain socket will be opened Please advice what can be the reason for such behaviour? Thanks Boris, Best regards, Boris Bouslov. --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.

1 0

[Users] uri:host
by Ramin Dousti 19 Sep '06

19 Sep '06

Hi, I just upgraded from v1.0.0 to v1.1.0 and my old config file seem to have problems, namely, the line: ... forward_tc(uri:host); ... gives a syntax error. I tried to read the release notes but couldn't find anything indicading any change. Thanks in advance, -- Ramin

2 1

[Users] Callerid Rewrite
by Zac Amsler 19 Sep '06

19 Sep '06

Hi all! Noob question that needs advanced help. One of my providers will reject calls if valid US callerid is not presented to them. I need to find a way to have openSER rewrite bad callerid info. ( If the user sends valid callerID I would like to preserver that) To keep it simple.. I would want to rewrite any callerid that is less than 10 digits. Could someone point me in the right directions? TIA! Cheers, -- Zac Amsler, Network Operations NetIQ Systems, LLC www.netiqsys.net <http://www.netiqsys.net>

3 3

[Serusers] msilo problems...Anyone, please help!!
by Meidiana Ten 19 Sep '06

19 Sep '06

Halo, guys... thanx for the time to read this mail I really need help to solve msilo problems... I have setup SER server in order to use msilo to deliver offline voice message, it works. But I really don't know how to add msilo parameter and the logics in my ser.cfg. Last, how to test whether the msilo module is working or not? Please give me solutions from this problem. I will very thank you because my last project in university is about to meet deadline... Regards, Meidiana Ten --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

2 1

[Users] errors in avpops module documentation
by Juha Heinanen 19 Sep '06

19 Sep '06

looks like avpops module documentation does not allow pseudo variables as avp names although, for example, avp_pushto function does support them. 1.5.7. avp_pushto(destination,name) ... name - which AVP(s) should be pushed into the SIP message. Parameter syntax is: * name = ( avp_name | avp_alias )['/'flags] * flags = 'g' and 1.3. AVP naming format The format of the parameters specifying an AVP in functions exported by this module is: $avp(avp_flags:avp_name) or $avp(avp_alias). according to above, for example. avp_pushto("$ru/domain", "$fd"); should not work, but it does (at least in 1.1.0). -- juha

2 1

RE: [Serusers] Re: SER and Asterisk integration
by Tracy Lofton 19 Sep '06

19 Sep '06

Hi Alex, I think i understand a bit better. Your users are registering with * and not SER, and you're * server is on DHCP (i understood this part). What I did not see, is that you users are not registering to SER (correct me if i am wrong). My setup is opposite to this as well. I am thinking that maybe you can make changes in * .conf files to get around the trusted tables, but maybe you have already done this, so excuse my unkowledgeability of what you have already done and your specific setup. But I am trying to visualize your network and what I might do if i had your setup. You basically have registered * with SER Only, but not the individual users. How you are setting up extensions.conf for each user maybe? I know some of this has already been done by you or your system would not be where it is, but because i don't know what all you have, I put a bit more than needed for you to pick out what's useful. [general] register => already done [serserver] context=global, default, incoming or... type=peer fromuser=YOUR NUMBER ; callerid number username=YOUR NUMBER authuser=YOUR NUMBER secret=YOUR PASSWORD host= INSERT PROXY HERE ;host to contact fromdomain= INSERT PROXY HERE ; domain you're on nat=no ; network address translation (set to yes if you have problems) canreinvite=yes insecure=very ; security level qualify=yes ; require password (I think require this) EXTENSIONS.CONF [outgoing] exten => _1NXXNXXXXXX,1,dial(SIP/${EXTEN:0}@serserver,10,r) ; for each user exten => _1NXXNXXXXXX,2,congestion exten => _NXXNXXXXXX,1,dial,(SIP/1${EXTEN:0}@serserver,10,r) exten => _NXXNXXXXXX,2,Hangup I hope something in here is useful to you buddy with all this typing. :) Tracy >From: "Alex Fler" <alexfler(a)yahoo.com> >To: "'Tracy Lofton'" <tracylofton_1(a)hotmail.com>,"Serusers@lists. iptel. >org" <Serusers(a)lists.iptel.org> >Subject: RE: [Serusers] Re: SER and Asterisk integration >Date: Tue, 19 Sep 2006 08:51:20 -0400 > >Hello Tracy, >Thanks for respond, >I already tried putting ip addresses into trusted table for static ip pstn >gateways; unfortunately it's not the case. My asterisk server using ADSL >connection with DHCP, so I will never now when IP going to change. The >incoming calls part was easily configured which simple registering asterisk >with SER, unfortunately for an outgoing part even when I use >fromuser="registered with ser username" and fromdomain="domain name" >I cant rout call out with ser, because ser will ask for authentication. >If you have any other ideas please let me know. >Thanks again for your help > >Alex Fler > >-----Original Message----- >From: serusers-bounces(a)lists.iptel.org >[mailto:serusers-bounces@lists.iptel.org] On Behalf Of Tracy Lofton >Sent: Monday, September 18, 2006 12:57 PM >To: Serusers(a)lists.iptel.org >Subject: Re: [Serusers] Re: SER and Asterisk integration > >Hi Alex, > >Forgive me with all of these back-to-back emails, but I hate to mislead in >any way, so this should be the last one. One final note I observed is that >in all actuality the Getting Started Guide states that it is whatever ip >address is your PSTN gateway actually goes into the trusted table of SER >database. > >Tracy > > > >From: "Tracy Lofton" <tracylofton_1(a)hotmail.com> > >To: Serusers(a)lists.iptel.org > >Subject: Re: [Serusers] Re: SER and Asterisk integration > >Date: Mon, 18 Sep 2006 16:19:20 +0000 > > > >Hi, > > > >Actually I had recently changed my setup allocating individual UAs, so > >today I changed it back to only have the static ip address of SER for >which > > >my UAs register. Now I do not need to watch changes for every UA. I do > >not know if this is your case, but if it is then you only have to put in > >the trusted table one entry for static ip of SER sip router something >like > >this (and not the ips of UAs at all, if SER is at least static ip): > > > >insert into trusted (src_ip, proto, from_pattern) values ('69.160.100.2', > >'any', 'sip:.*$'); > > > >only for SER static IP address for which UAs register > > > >Hope this helps you. > > > > > > > > > >>From: "Tracy Lofton" <tracylofton_1(a)hotmail.com> > >>To: Serusers(a)lists.iptel.org > >>Subject: Re: [Serusers] Re: SER and Asterisk integration > >>Date: Mon, 18 Sep 2006 15:14:06 +0000 > >> > >>Hi again, > >> > >>what i would also like to add to the previous email regarding this >issue, > >>is that if you find out that we can input some type of regex in the >src_ip > > >>column to account for dynamic ips, please let me know too because then i > >>would not have to keep an eye on when the dynamic ip addresses change. > >> > >>Tracy > >> > >> > >>>From: "Tracy Lofton" <tracylofton_1(a)hotmail.com> > >>>To: Serusers(a)lists.iptel.org > >>>Subject: Re: [Serusers] Re: SER and Asterisk integration > >>>Date: Mon, 18 Sep 2006 15:06:45 +0000 > >>> > >>>Hi, > >>> > >>>I read about your dynamic ip situation and not using the trusted tables > >>>but it seems like until you do this you will continue to receive the >407 > >>>Unauthorized messages from Asterisk, but have you at least tried to >input > > >>>the data into trusted table with using the external ip address of your > >>>sip phones, because all of my sip phones in the trusted table are using > >>>router allocated ip addresses but i input them into the trusted tables > >>>using their external ip address of the DSL provider, etc, such as: > >>> > >>>insert into trusted (src_ip, proto, from_pattern) values >('69.160.100.2', > > >>>'any', 'sip:.*$'); > >>> > >>>if you find that this does not work then just do: > >>> > >>>delete from trusted where src_ip=69.160.100.2; > >>> > >>>Keep me posted how it works. > >>> > >>>Tracy > >>> > >>> > >>> > >>>>From: "sip" <sip(a)infinideas.com> > >>>>To: "Alex Fler" <alexfler(a)yahoo.com>,"Serusers@lists. iptel. org" > >>>><Serusers(a)lists.iptel.org> > >>>>CC: serusers-bounces(a)lists.iptel.org > >>>>Subject: Re: [Serusers] Re: SER and Asterisk integration > >>>>Date: Mon, 18 Sep 2006 10:20:13 -0400 > >>>> > >>>>Have you tried adding a > >>>> > >>>>fromdomain=mydomain.com > >>>> > >>>>In your peer section? > >>>> > >>>>N. > >>>> > >>>>On Mon, 18 Sep 2006 10:02:27 -0400, Alex Fler wrote > >>>> > Hello Guys, > >>>> > I-m trying to integrate Ser with asterisk. > >>>> > Asterisk server resides on private network behindrouter. All UA-s >are > > >>>>on the same internal network with Asterisk serverand registered with >it. > >>>> > Asterisk server registered with Ser server, so thisway I get >incoming > > >>>>calls without any problems. At the same time when on ofUA-s trying to > >>>>call out > >>>> > Ser server gives 407 errors Authentication Required.I cannot add > >>>>asterisk server into my trusted table because ADSL connection >hasDynamic > > >>>>IP which may change frequently. > >>>> > This message I receive, because in INVITE part I haveUA in FROM: > >>>>field witch are registered with asterisk not SER. How can I >resolvethis > >>>>issue for outgoing calls? > >>>> > Thank you for your help and sorry for bad English > >>>> > > Regards > >>>> > > Alex Fler > >>>> > > >>>> > >>>> > >>> > >>> > >>>>_______________________________________________ > >>>>Serusers mailing list > >>>>Serusers(a)lists.iptel.org > >>>>http://lists.iptel.org/mailman/listinfo/serusers > >>> > >>>_________________________________________________________________ > >>>Search from any web page with powerful protection. Get the FREE Windows > >>>Live Toolbar Today! http://get.live.com/toolbar/overview > >>> > >>>_______________________________________________ > >>>Serusers mailing list > >>>Serusers(a)lists.iptel.org > >>>http://lists.iptel.org/mailman/listinfo/serusers > >> > >>_________________________________________________________________ > >>Get the new Windows Live Messenger! > >>http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source >=wlmailtagline > >> > >>_______________________________________________ > >>Serusers mailing list > >>Serusers(a)lists.iptel.org > >>http://lists.iptel.org/mailman/listinfo/serusers > > > >_________________________________________________________________ > >Add fun gadgets and colorful themes to express yourself on Windows Live > >Spaces > >http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://ww >w.get.live.com/spaces/features > > > >_______________________________________________ > >Serusers mailing list > >Serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > >_________________________________________________________________ >Search?Your way, your world, right now! >http://imagine-windowslive.com/minisites/searchlaunch/?locale=en-us&FORM=WLM >TAG > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > _________________________________________________________________ The next generation of Searchsay hello! http://imagine-windowslive.com/minisites/searchlaunch/?locale=en-us&FORM=WL…

1 0

[Users] Please help for software for testing TLS in openser
by Ferianto siregar 19 Sep '06

19 Sep '06

Dear all, Thank you very much for time to read my problem. Thank you very much... All, I have built openser server and I can build it successfully. It means that the client can make call each other. The openser server that I build is support TLS (in openser.cfg, I enable the TLS support). But, I need help for testing my TLS in voip communication. I have type command : # openser -V , and I can see that the TLS is used. But,How can I test the openser that supported TLS? because in my mind, for testing the TLS, I must have a software that supported TLS. So, if the client can communicate each other by using the software phone that supported TLS, it means that the TLS have run successfully (because TLS use port 5061 ). Is this opinion correct? Or can anybody give a suggestion how to test my openser TLS? if I have to use software phone that supported TLS.Please tell me..Pelase.. Thank you very much for your help. Thank you Regards, Ferianto --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

3 6

[Users] openser -- phone intercom feature
by zm23 19 Sep '06

19 Sep '06

Hi all, Many sip phones now offer intercom feature or auto answer. Has anyone done this using openser? I am trying to setup a prefix so that if line number is 12345, calling 612345 will make it act as an intercom. Any help will be greatly appreciated. Thanks. -- Zahid Mehmood CUIT Network Systems

3 2

[Serusers] Re: SER and Asterisk integration
by Alex Fler 19 Sep '06

19 Sep '06

Hello Guys, I'm trying to integrate Ser with asterisk. Asterisk server resides on private network behind router. All UA's are on the same internal network with Asterisk server and registered with it. Asterisk server registered with Ser server, so this way I get incoming calls without any problems. At the same time when on of UA's trying to call out Ser server gives 407 errors Authentication Required. I cannot add asterisk server into my trusted table because ADSL connection has Dynamic IP which may change frequently. This message I receive, because in INVITE part I have UA in FROM: field witch are registered with asterisk not SER. How can I resolve this issue for outgoing calls? Thank you for your help and sorry for bad English Regards Alex Fler

3 6

[Serusers] test
by Jan Janak 19 Sep '06

19 Sep '06

please ignore

1 0

[Users] SER/OpenSER beer meeting in Oslo..
by Atle Samuelsen 19 Sep '06

19 Sep '06

Hi Guys, Girls, Mothers, Fathers, and Children ;) It's now time to spend some money on expencive norwegian beer Are you up for a few beers at Beer Palace Akerbrygge Wednesday the 27th of September 2006? We tought of meeting at 7 pm (19:00) at Beer Palace. The Topic this time is SER 0.10 :D please send me a email if you think you will come :) Best Regards Atle Samuelsen +47 41 44 11 44

5 4

[Serusers] Do I need 2 table of msilo (voice silo and silo)?
by Meidiana Ten 19 Sep '06

19 Sep '06

Hii guys, good evening... I need the explanation around database table that is used by msilo module to store offline voice message. When I run my serweb, I found that there is an error about SQL query. Then I check the page that the error occure and that the error caused by the voice silo table. So I check my SER database and found that there is no table named voice silo, just silo. I'd like to ask if I must add voice silo table or just use the silo table to store offline voice message? If I have to, please tell me the entities of the voice silo table. Thank you for the time in reading this mail. Regards, Meidiana Ten --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail.

1 0

[Serusers] how to configure B2BUA with SER...?
by prabhakar g 19 Sep '06

19 Sep '06

hello i am running running SER with mysql+rtpproxy... i want to configure B2BUA can anybody guide me how to do... -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

2 1

[Serusers] Getting online users out of SER
by Sebastian Damm 19 Sep '06

19 Sep '06

Hi, I am currently testing SER for running it in a quite large environment with about 40000 online users. I'd like to offer my users an online/offline status - at least for themselves, maybe also for users in their contacts. I have noticed that when operating SER in database mode every time it writes back the location to database it hangs and doesn't answer requests anymore. This situation is not acceptable, whenever this happens no REGISTERs, INVITEs, 200OKs or anything else passes the server and registering fails, calls don't get established a.s.o. I think a lot of you have an online/offline status, but which way do you go technically? One way would be to grab the contacts from the FIFO, but that solution doesn't seem to be suitable, too. The problem with that is, that only one process at a time can query the fifo, and at this time, other processes will hang, you'll have to start the query once again. I played around with the click2dial script and other fifo stuff and noticed how error-prone that is. Once the fifo didn't answer at all anymore and I had to restart SER. Is anyone running another solution for getting all or some contacts out of SER? Thanks in advance, Sebastian -- Sebastian Damm GPG-Encrypted mail welcome! ID: 0x64D96827 @ pgpkeys.pca.dfn.de Fingerprint: CB7F F23F D950 644D 838B 215A 550F 75EC 64D9 6827

2 1

[Users] Problem with Exec and perl
by Asterisk Expert 19 Sep '06

19 Sep '06

Hello dear list members, I'm having a problem executing perl script for prefix stripping and adding using database. This script works fine when executed form shell but when I execute this script to rewrite uri by using exec module, it fails. It says it can't connect to mysql database. I've used DBI in perl to connect to mysql. Can anyone help me with this? -- Thanks in advance Asterisk Expert

2 1

[Serusers] problem with mysql.so
by Christoph Reichl 19 Sep '06

19 Sep '06

I have been trying to install SER with mysql on my system (CentOS 4 - running on a virtual machine) i have installed mysql 4.1.20-1 and ser 0.9.6. Now when i execute ser ([root@SER ~]# /usr/local/sbin/ser start) I get the following error... 0(2174) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: /usr/local/lib/ser/modules/mysql.so: undefined symbol: PL_memory_wrap 0(2174) parse error (26,13-14): failed to load module 0(2174) parse error (149,28-29): unknown command, missing loadmodule? 0(2174) parse error (157,37-38): unknown command, missing loadmodule? 0(2174) parse error (163,32-33): unknown command, missing loadmodule? 0(2174) parse error (178,28-29): unknown command, missing loadmodule? ERROR: bad config file (5 errors) Originally there was no mysql.so file in the modules directory of ser, so i copied the file from the perl-DBD folder.... I have no idea how i can make ser recognize the mysql module...? Thanks for the help! regards, Christoph Reichl (christoph(a)arin.net)

3 3

[Users] Re: [Devel] New module: SIP Session Timer (sst)
by Bogdan-Andrei Iancu 18 Sep '06

18 Sep '06

Hi Ron, this looks super. Please upload the module on the tracker (just to have it there). In the mean while I forward your email on the users mailing list so people can show (or not) their interest for this new functionality. If there are no arguments against it, the module may be uploaded on the public cvs - of course you need to take care and maintain the module for the future ;). Regards, Bogdan Ron Winacott wrote: >Hello all, > I would like to contribute the following new module to the OpenSER project. >If you find it usesfull, great, if not, sorry for the spam :-) > >The new module gives OpenSER basic SIP Session Timer support. See rfc4028 for >more information on SST. This new module uses the new dialog module to track >the creation, updating and termination of SIP dialogs. The dialog module >supports timed out termination of the dialog but at this time the timeout >value is hardcoded (avp accessable and modparam() settable) > >What the sst module does is uses the dialogs own callbacks to update the >dialog timeout value based on the current expire: header value. > >There is also a script function called sstCheckMin(min_se_value) that can be >used in a proxy configuration to reply with a 422 "Session Interval Too >Small" to a INVITE with a small MIN_SE value. > >As I see new functionality requirements of the module I will add it. If you >have a request for some new functionality in the SST module, please email me >your ideas. > >The attached file is a gzipped tar ball of the sst module directory tree. (cd >openser/modules tar -xzf sst.tgz to extract) > >Thanks for your time, > ronw > > > >------------------------------------------------------------------------ > >_______________________________________________ >Devel mailing list >Devel(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/devel > >

3 2

[Users] serweb error (400 ul_add: flags expected)
by cv aik 18 Sep '06

18 Sep '06

Hi all, I have problem to built serweb into openser 1.1.0. i use openser 1.1.0 and it work succesfully. i can add user by using openserctl add. For web interface i use serweb 2004-07. When i tried add new user, i have error message when i click for confirmation. the error is: 400 ul_add: flags_expected I check into the database (mysql), new user was added into subscriber and pending table but the aliases table was not.. When i tried add user by openserctl add, in serweb i can login as that user.. Why it happen? What should i do to run serweb succesfully? Thanks for your help.. Aldi --------------------------------- All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.

2 2

[Users] openser 1.1.0 and serweb 0.9.4
by Daniel-Constantin Mierla 18 Sep '06

18 Sep '06

Hello, thanks to a contributor with php knowledge, a patch to make serweb 0.9.4 working with openser is available at: http://voip-info.org/wiki/view/OpenSER+1.1.x+and+SerWEB+0.9.4 The patch is fresh and not tested too much, but should allow to start openser and serweb together and opens the framework to improvements by other members willing to use the two applications. If you get stuck at a point, post it to devel(a)openser.org along with description and error messages -- maybe someone will be able to get a workaround. Cheers, Daniel

1 0

[Users] Openser and my voip provider
by Marco Spiga 18 Sep '06

18 Sep '06

Subject: Openser and my voip provider HELLO In my lan I would like to have three SIP phone registered whit my voip provider, with ip public and Local Number Portability. Is it possible with Openser to circumscribe the voip local traffic into my lan, and to manage the rest of voip traffic in transparent mode? Can my voip provider save the logs of the my voip local traffic? Sorry for my bad english. Thanks Advanced Marco

3 4

[Users] Checking for Digit Length
by Max Gregorian 18 Sep '06

18 Sep '06

Hello all, I haven't been using OpenSER long so forgive me if this is a silly question. We are currently using OpenSER 1.0.1 (no TLS) running on CentOS 4.2 and 4.3Linux, if that helps. Basically I am trying to find out a way of checking for minimum and maximum digit length dialled by our users, in order to filter some of the traffic through our OpenSER server. Dialling rules aside, is there a way? Perhaps something involving checking the length of the Request URI in an INVITE message and then possibly sending a "404 Not Found" or similar message back? Is there a particular module I should be looking at too, or some generic functions that can do this? Your thoughts and comments very welcome. Thanks in advance. Max.

3 4

[Users] openser behind provider nat
by Silvano Galliani (kysucix) 18 Sep '06

18 Sep '06

Hi. I would like to use openser as a sip proxy under my provider NAT. Here is my situation: Sip client (software or hardware) | | | | V Milkfish with openser that's also the router and firewall that does NAT | | | | V Nat of my internet provider with public ip (fastweb.it) | | | | V Sip provider (skypho.net) (it has also a sipproxy) Can I make it working? How? Because I tried but even registering fails. bye kysucix

2 1

[Users] Nathelper Errorlog Entry
by Dominik Bay 18 Sep '06

18 Sep '06

Hi, i've just notices that i'm getting "ERROR:nathelper:nh_timer: out of memory" each time it passes this section: if (!allow_trusted() && client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; There are around 1.6GB of Memory free on this box, so i don't think it's a real OOM error ... -- Mit freundlichen Gruessen / Kind regards Dominik Bay Cablesurf Technik

2 1

[Users] Integrating the Openser for VoiceMail and PBX with Asterisk, For Account
by raviprakash sunkara 18 Sep '06

18 Sep '06

Hi Users, I'm new to Asterisk programming , I'm in working the Voip Technologies by using the OpenSER for my call routing process and Radius For AAA. But in Asterisk i need it for only PBX and VoiceMail, For Account I'm using the Openser + Radius . Main My doubt is that, For Call Routing my using the OpenSER. every thing is fine and Good .. But i need the Voicemail , it forword to the Asterisk Server, that . Is the Openser takes the Accounting part or Asterisk it Take place .... Who did the Database know the User had a voicemail in his voice mail Box... That Databases i need How ? Please Help me .... And Mainly Excuse me in English -- Thanks and Regards *Ravi Prakash Sunkara* *M*:+91 9985077535 *O*:+91 40 23114549 *F*:+91 40 40208727 *ravi.sunkara(a)hyperion-tech.com* *www.hyperion-tech.com*

3 2

[Users] [openser] Adding sip_trace module to 1.0.1
by Tracy Lofton 18 Sep '06

18 Sep '06

Hi, I would like a little direction on how to add the sip_trace module for 1.1.0 to my openser 1.0.1 without having to figure it out all on my own. I was thinking I would have to add some #include, #ifndef, #defines, etc. here and there to pertinent .c , .h files and then run make from the sip_trace directory itself and then move the sip_trace.so module with the other modules to incorporate the merge. Any advice would be very much appreciated but I do not want to upgrade to 1.1.x at this time. Tracy _________________________________________________________________ Call friends with PC-to-PC calling -- FREE http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=…

2 1

[Users] Please help me for the first useful setup
by Ronald Wiplinger 18 Sep '06

18 Sep '06

Can you please help me for a useful set-up, beyond local phones. I am thinking on ENUM and on sipbroker.com set-up. a. ENUM I would like that if you dial an enum registered phone, than it should connect to it. b. sipbroker.com Any of registered peers should be reachable with a *number plus extension number. How to set-up? Is there are special setting for the "*" necessary? c. I have now NO password set-up for my users (no database) since it is for now only on a private LAN. I want to extend it, but with the web signup interface. I have read that such thing exist, but could not find it. Besides enable the three lines in openser.cfg regarding the mysql and set-up the tables, do I need to do additional settings? (Of course I have to set-up the accounts - with the web interface - and the phones for that) bye Ronald

2 1

[serusers] Adding New Module Not Offered To Older SER Version
by Tracy Lofton 18 Sep '06

18 Sep '06

Hello, This is a hypotheical question, yet true at the same time. If i want to add a module and its directory structure that is offered in a new version but that is not offered in an older version (one that i have for instance), which files are the norm that the modules are dependent upon and vice-versa, and where would i need to add data such as #ifndef, #defines, #includes for pertinent .c, .h files etc. I would really appreciate a little direction, then I would not have to dig all alone. I am not complaining but rather just saying that I do not want to upgrade everytime a new feature (module) is released but would prefer to just add/change for the integration of modules/features which i am interesteed in. Thanks, Tracy _________________________________________________________________ Got something to buy, sell or swap? Try Windows Live Expo ttp://clk.atdmt.com/MSN/go/msnnkwex0010000001msn/direct/01/?href=http://exp…

2 1

[Serusers] Ser Service not starting..?
by prabhakar g 18 Sep '06

18 Sep '06

hi i have installed ser.0.9.6 successfully and when i am trying to start ser i am getting this error when i type ser moni showing like this Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 202.65.159.20 [202.65.159.20]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 202.65.159.20 [202.65.159.20]:5060 Aliases: tcp: lline-202-65-159-20.pol.net.in:5060 tcp: localhost:5060 tcp: localhost.localdomain:5060 tcp: test:5060 tcp: test.ser.com:5060 udp: lline-202-65-159-20.pol.net.in:5060 udp: localhost:5060 udp: localhost.localdomain:5060 udp: test:5060 udp: test.ser.com:5060 0(3834) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048 0(3834) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548 0(3834) fm_malloc_init(0xb5fe6000, 33554432), start=0xb5fe6000 0(3834) shm_mem_init: success 0(0) core dump limits set to 4294967295 0(0) DEBUG: init_mod: sl_module stateless - initializing 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(0) unixsock_register_cmd: New command (sl_stats) registered 0(0) DEBUG: MD5 calculated: b27e1a1d33761e85846fc98f5f3a7e58 0(0) DEBUG: init_mod: tm 0(0) TM - (size of cell=2776, sip_msg=760) initializing... 0(0) Call-ID initialization: '3bfcfe46' 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered 0(0) unixsock_register_cmd: New command (t_hash) registered 0(0) unixsock_register_cmd: New command (t_reply) registered 0(0) DEBUG: lock_initialize: lock initialization started [root@test ~]# 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(0) unixsock_register_cmd: New command (t_stats) registered 0(0) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed 0(0) DEBUG: MD5 calculated: a6a1c5f60faecf035a1ae5b6e96e979a 0(0) DEBUG: init_mod: rr 0(0) rr - initializing 0(0) DEBUG: init_mod: maxfwd 0(0) Maxfwd module- initializing 0(0) DEBUG: init_mod: usrloc 0(0) usrloc - initializing 0(0) DEBUG: register_fifo_cmd: new command (ul_stats) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_rm) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_dump) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_flush) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_add) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered 0(0) unixsock_register_cmd: New command (ul_stats) registered 0(0) unixsock_register_cmd: New command (ul_rm) registered 0(0) unixsock_register_cmd: New command (ul_rm_contact) registered 0(0) unixsock_register_cmd: New command (ul_dump) registered 0(0) unixsock_register_cmd: New command (ul_flush) registered 0(0) unixsock_register_cmd: New command (ul_add) registered 0(0) unixsock_register_cmd: New command (ul_show_contact) registered 0(0) find_mod_export: <db_use_table> in module mysql not found 0(0) bind_dbmod: Module mysql does not export db_use_table function 0(0) ERROR: mod_init(): Can't bind database module 0(0) init_mod(): Error while initializing module usrloc ERROR: error while initializing modules 0(0) DEBUG: tm_shutdown : start 0(0) DEBUG: unlink_timer_lists : emptying DELETE list 0(0) DEBUG: tm_shutdown : emptying hash table 0(0) DEBUG: tm_shutdown : releasing timers 0(0) DEBUG: tm_shutdown : removing semaphores 0(0) DEBUG: tm_shutdown : destroying tmcb lists 0(0) DEBUG: tm_shutdown : done 0(3836) shm_mem_destroy 0(3836) destroying the shared memory lock and my mysql.so file is showing in this location /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/auto/DBD/mysql/mysql.so what is the problem ?? and when i trying to add ser user i am getting this error [root@test ~]# serctl add globe1 globe1 globe1(a)test.ser.com MySql password: error: SER/FIFO not accessible: 2 -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

3 2

[Serusers] One-Way Audio call via Clarent Analog gateway
by Asep Saifudin 18 Sep '06

18 Sep '06

Hi, Does Anyone have experience SER call to PSTN or Cellular via Clarent Analog gateway ? because I always got One-Way Audio (Caller can hear Callee but Calle cannot hear Caller). If I call via CISCO gateway I have no problem or always got Two-Way Audio ~Asep

2 1

[Serusers] redirecting based on m= line in SDP
by Scott Keagy 18 Sep '06

18 Sep '06

What would folks recommend as the most efficient in terms of processing, and most efficient in terms of understanding/coding in SER, for how to do this? I'm not up to speed on SER-specific functions and ways of doing things yet. One way I thought of is using the exec_msg function, passing the whole SIP message to a simple external script that searches for a specific pattern in the m= line and returns 0 if it's found or -1 if it's not found. Are there other more straightforward ways to do this or is this about as elegant as it's going to get? Obvious shortcoming is you can only choose between two codec or payload types, but this is sufficient for my purposes. Regards, Scott

3 2

Re: [Serusers] Registeration failed
by Greger V. Teigre 18 Sep '06

18 Sep '06

1. Always copy serusers, I don't answer private emails that should be on serusers 2. I don't answer questions "show me what to do", just questions that show you have made an attempt at understanding things yourself (especially when I already have pointed out a very good source of information) g-) mukesh wrote: > Hi Greger, > thanks a ton for your quick reply. > > > below is my ser.cfg (some extarcts), where do In need to make the > change? > ----------------------------------- > .......... > .......... > fifo="/tmp/ser_fifo" > fifo_db_url="mysql://ser:heslo@localhost/ser" > .......... > .......... > # ----------------- setting module-specific parameters > --------------- > .......... > .......... > # -- auth params -- > #following single statement is added by Mukesh > modparam("auth_db|uri_db|usrloc", "db_url", > "mysql://ser:heslo@localhost/ser") > .......... > .......... > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > ................... > .................... > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("ims.myserver.com", > "subscriber")) { > www_challenge("ims.myserver.com", "0"); > break; > }; > > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > append_hf("P-hint: usrloc applied\r\n"); > route(1); > --------------------------ser.cfg ends here--------------------------------- > > And I could not find any /etc/localhosts file but host.conf, hosts, > hosts.dny and hosts.allow were there. Plz suggest where sholf I make the > changes. > > Regards > Mukesh > > > -----Original Message----- > From: Greger V. Teigre [mailto:greger@teigre.com] > Sent: Friday, September 15, 2006 12:04 PM > To: mukesh > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Registeration failed > > Hi Mukesh, > > 1. You cannot ping an AOR (Address Of Record) that is not registered, i.e. > serctl ul show. > SER does not find the AOR and tries to DNS resolve it to find out which > server to forward the call to. ims.myserver.com should thus be DNS > resolvable (or add it to your /etc/locelhosts file as an alias to your > server's public address).You will also want to add alias=ims.myserver.com to > your config > > 2. See the Getting Started document at > http://iptel.org/ser/doc/gettingstarted, as well as the documentation for > the SIP client you use on your mobile. Which one is it?! > g-) > > mukesh wrote: > >> Hi friends, >> I have successfully installed SER with MySQL support on my linux >> machine (having public ip) and have added to users leo and mukesh. >> >> I have exported SIP_DOMAIN as >> # export SIP_DOMAIN=ims.myserver.com >> and added "export SIP_DOMAIN=ims.myserver.com" to /etc/profile as >> well >> >> First Problem >> --------------------------- >> If I try below... >> >> # /usr/local/sbin/serctl ping sip:mukesh@ims.myserver.com >> [1]+ Done cat <$path | filter_fl >> 500 >> >> Below is error log extracted from /var/log/messages >> >> Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: mk_proxy: could not >> resolve >> hostname: "ims.myserver.com" >> Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: uri2proxy: bad host name >> in URI <sip:mukesh@ims.myserver.com> Sep 15 10:37:30 oradb1 ser: >> 2(3911) ERROR: uri2sock: Can't create a dst proxy Sep 15 10:37:30 >> oradb1 ser: 2(3911) ERROR: get_hfblock: send_sock failed Sep 15 >> 10:37:30 oradb1 ser: 2(3911) ERROR: fifo_uac_error: no mem for hf >> block >> ----------------------------- >> >> Second Problem >> -------------- >> How can I configure my Nokia6680 as UA (It has SIP support)? >> >> >> any kind of help/suggestion is highly appreciated. >> >> Regards >> Mukesh Kumar >> >> >> >> >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> > > > >

1 0

[Users] Openser and my voip provider
by Marco Spiga 17 Sep '06

17 Sep '06

HELLO In my lan I would like to have three SIP phone registered whit my voip provider, with ip public and Local Number Portability. Is it possible with Openser to circumscribe the voip local traffic into my lan, and to manage the rest of voip traffic in transparent mode? Can my voip provider save the logs of the my voip local traffic? Sorry for my bad english. Thanks Advanced Marco

1 0

[Serusers] mysql.so file missing..?
by prabhakar g 16 Sep '06

16 Sep '06

hi ram,and suresh thanx for replying for my mail some body mailed me how to to load mysql.so see below i have done success fully and mysql.so file showing in this location /usr/local/lib/ser/modules/mysql.so but i am not able to run my serctl service giving the same error ,ysql.sofile missing ---------------------------- cd ser-0.9.6/modules/mysql then run make and you will see a warning about "you should run make from the main source directory." Then after running make, DO NOT DO make install but just type in the command terminal: ls you will see the mysql.so module then move it to the directory with the other modules like: mv mysql.so /usr/local/lib/ser/modules Please do it this time. I have done this before myself so I know it works. -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

1 0

[Serusers] mysql.so file missing...?
by prabhakar g 15 Sep '06

15 Sep '06

hi everybody i am installing mysql ,and installing ser-0.9.6 with make and make install but when i am runnig my ser i am not able to find mysql.so file please let me know how to make changes in make file to load mysql.so file i am new to this please give me commands to load mysql.so module file this how i am installing mysql cd /usr/local wget http://mirror.services.wisc.edu/mysql/Downloads/MySQL-4.0/mysql-4.0.26.tar.… gunzip mysql-4.0.26.tar.gz tar xvf mysql-4.0.26.tar cd mysql-4.0.26 userdel mysql groupadd mysql useradd -g mysql mysql ./configure --prefix=/usr/local/mysql --enable-large-files --enable-shared=yes make && make install scripts/mysql_install_db chown -R root /usr/local/mysql chown -R mysql /usr/local/mysql/var chgrp -R mysql /usr/local/mysql cp support-files/my-medium.cnf /etc/my.cnf vi /etc/rc.d/rc.local /usr/local/bin/rtpproxy export SIP_DOMAIN="globe7.com" /usr/local/sbin/ser /usr/local/mysql/bin/mysqld_safe --user=mysql & /usr/local/mysql/bin/mysqld_safe --user=mysql & PATH="$PATH:/usr/local/mysql/bin" -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

1 0

[Users] Xlite : Please help for Xlite 3.0
by Ferianto siregar 15 Sep '06

15 Sep '06

Dear all, Thank you very much for your time to read this message. I have a problem when running xlite 3.0 in my openser server. But, when using xlite 2.0, I don`t get any problem in making a call. The problem that I have got is I can not make a call when using xlite 3.0. But when user registering is ok ( The user who is registered, can login ). But each of them, can not communication one another. The error message that I got from Xlite : Call failed : User Not Found Says : "The person that you are calling is`n available. Please try again." How can it be? What`s wrong? Please help me..Please.. Thanks Thank you very much, Regards, Ferianto Note: 1. When I using xlite 2.0, there is no problem when make a call. Each user who is registered, can login and make a call. 2. For the Xlite configuration, I have done like configuration that I make in xlite 2.0 3. This is the message that I got from openser server 6(3662) DEBUG: delete transaction 0xb6199de0 6(3662) DEBUG: wait_handler : done 6(3662) DEBUG: timer routine:2,tl=0xb6180de8 next=0xb627e370 6(3662) DEBUG: wait_handler : removing 0xb6180da0 from table 6(3662) DEBUG: delete transaction 0xb6180da0 6(3662) DEBUG: wait_handler : done 6(3662) DEBUG: timer routine:2,tl=0xb627e370 next=(nil) 6(3662) DEBUG: wait_handler : removing 0xb627e328 from table 6(3662) DEBUG: delete transaction 0xb627e328 6(3662) DEBUG: wait_handler : done 4(3660) udp_rcv_loop: probing packet received from 202.95.149.2 42215 3(3659) udp_rcv_loop: probing packet received from 202.95.149.2 42215 2(3658) SIP Request: 2(3658) method: <REGISTER> 2(3658) uri: <sip:202.95.149.251> 2(3658) version: <SIP/2.0> 2(3658) parse_headers: flags=2 2(3658) Found param type 232, <branch> <z9hG4bK-d87543-ed372f1c1f21b160-1--d87543->; state=6 2(3658) Found param type 235, <rport> = <n/a>; state=17 2(3658) end of header reached, state=5 2(3658) parse_headers: Via found, flags=2 2(3658) parse_headers: this is the first via 2(3658) After parse_msg... 2(3658) preparing to run routing scripts... 2(3658) parse_headers: flags=100 2(3658) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(3658) parse_headers: flags=200 2(3658) DEBUG:parse_to:end of header reached, state=10 2(3658) DBUG:parse_to: display={"aldi"}, ruri={sip:aldi@202.95.149.251} 2(3658) DEBUG: get_hdr_field: <To> [33]; uri=[sip:aldi@202.95.149.251] 2(3658) DEBUG: to body ["aldi"<sip:aldi@202.95.149.251> --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

2 1

[Serusers] SERWEB : Please help for serweb-0.9.4
by Ferianto siregar 15 Sep '06

15 Sep '06

Dear all, Thank you very much for your time to read this message. Thanks All, I have a problem in building serweb-0.9.4. I am using Fedora Core 4 I have tried it many times, but I can not build it untill now. Here are the tasks that I have done: 1. Installing classkit packet, DB, Log: # pear install classkit-0.4.tgz # pear install DB-1.7.6 tgz # pear install Log 2. Adding in php.ini : extension=classkit.so extension=imap.so include_path="/usr/share/pear" --> location where my pear 3. My serweb directory is in /var/www/html/serweb 4. pear list [root@sip ~]# pear list PHP Warning: Module 'imap' already loaded in Unknown on line 0 Installed packages: =================== Package Version State Archive_Tar 1.1 stable Console_Getopt 1.2 stable DB 1.7.6 stable HTML_Template_IT 1.1 stable HTTP 1.3.5 stable Log 1.9.8 stable Mail 1.1.4 stable Net_SMTP 1.2.6 stable Net_Socket 1.0.6 stable Net_UserAgent_Detect 2.0.1 stable PEAR 1.3.5 stable XML_Parser 1.2.6 stable XML_RPC 1.2.2 stable classkit 0.4 beta [root@sip ~]# clear But, when I try to load my serweb using web browser, I got this error message : Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit AND in /var/log/httpd, I got this error message : [root@sip httpd]# tail -f error_log [Fri Sep 15 21:31:02 2006] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Fri Sep 15 21:31:02 2006] [notice] Digest: generating secret for digest authentication ... [Fri Sep 15 21:31:02 2006] [notice] Digest: done [Fri Sep 15 21:31:02 2006] [notice] LDAP: Built with OpenLDAP LDAP SDK [Fri Sep 15 21:31:02 2006] [notice] LDAP: SSL support unavailable PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 PHP Warning: Module 'imap' already loaded in Unknown on line 0 [Fri Sep 15 21:31:02 2006] [notice] mod_python: Creating 4 session mutexes based on 256 max processes and 0 max threads. [Fri Sep 15 21:31:03 2006] [notice] Apache/2.0.54 (Fedora) configured -- resuming normal operations [Fri Sep 15 21:31:19 2006] [error] [client 202.95.149.50] Directory index forbidden by rule: /var/www/html/ My Question: 1. Why is the error in web browser still appear, although I have install classkit and add "extension=classkit.so"? 2. Why in /var/log/httpd in error_log file the classkit.so can not be loaded? But imap.so can be loaded? 3.What is wrong so this message appeared? [Fri Sep 15 21:31:19 2006] [error] [client 202.95.149.50] Directory index forbidden by rule: /var/www/html/ I do hope any body can give me a suggestion. Please help me... Please say anything..Please..Thanks Thank you very much Regards, Ferianto --------------------------------- Get your email and more, right on the new Yahoo.com

1 0

[Serusers] register_udomain(): Invalid table version (use ser_mysql.sh reinstall)
by bails 15 Sep '06

15 Sep '06

its come up before so i have to ask I have read the list archives and googled. 1. there is no reinstall option 2. there is nothing in tools/ If this is in CVS why hasnt it been fixed? Bails

3 3

[Serusers] OT: DIDs from Europe.
by Juan 15 Sep '06

15 Sep '06

Hi Gang. The company I work for is interested in buying DIDs from Europe. Of course the connection should be SIP. If any of you is selling them, please contact me off the list. Regards Juan Ferrari VoIP & Telecom Specialist United World Telecom Phone: +1561-276 7156 ext. 302

2 1

Re: [Serusers] allow_trusted"trusted table"
by samuel 15 Sep '06

15 Sep '06

CC'ing to the list... Change the from pattern and just place .* (without the ^sip: and the $) if you want to accept ALL from patterns. Samuel. 2006/9/15, ravi reddy <mravikreddy(a)gmail.com>: > Thanks for your reply Samuel, > > I will get income calls from 6 pstn gateways and i had added all the > ip-adresses in the trusted table as follows > src_ip proto from_pattern > pstngw any ^sip:.*$ > > but even though my SER is asking the authentication what i have to do :-( > > On 9/15/06, samuel <samu60(a)gmail.com> wrote: > > Take a look at the getting started doc and you'll find how to use > > allow_trusted. For instance: > > > > # > ----------------------------------------------------------------- > > 107. # Call Type Processing Section > > 108. # > ----------------------------------------------------------------- > > 109. if (!is_uri_host_local()) { > > 110. if (is_from_local() || allow_trusted()) { > > 111. route(4); > > 112. route(1); > > 113. } else { > > 114. sl_send_reply("403", "Forbidden"); > > 115. }; > > 116. break; > > 117. }; > > > > > > You would have to populate the trusted table in the SER's DB with the > > "trusted" IPs. > > > > Samuel. > > > > 2006/9/14, > > > > ravi reddy <mravikreddy(a)gmail.com>: > > > Hi samuel, > > > > > > I am using onsip.org ser.cfg and how can we check allow_trusted is > true > > > ? > > > > > > Thank You for reply. > > > > > > Regards, > > > Ravi. > > > > > > > > > On 9/14/06, samuel <samu60(a)gmail.com> wrote: > > > > you have to check whether allow_trusted returns true or not before any > > > > auth. action. > > > > > > > > Samuel. > > > > > > > > 2006/9/14, ravi reddy <mravikreddy(a)gmail.com>: > > > > > Hi , > > > > > > > > > > When i tried to make a incoming call from pstn to SER its > asking > > > for > > > > > proxy authentication required, > > > > > > > > > > I had entered the pstngw ip address in trusted table even then the > > > same > > > > > problem , is any thing else i have to do ;-) > > > > > > > > > > how i can cross this problem. > > > > > > > > > > > Thank > > > You. > > > > > > > > > > Regards, > > > > > Ravi. > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > Serusers(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

4 5

[Serusers] ser 0.9.0 accounting problems
by topi 15 Sep '06

15 Sep '06

hello, i'm using ser 0.9.0 and acc module to log transactions, actually it works but i need some help with two problems: 1) i would like to log acc messages to a different syslog facility, and a different file, than general logs are logged. -> my ser.cfg file contains: log_facility=LOG_LOCAL0 loadmodule "/usr/local/ser/lib/ser/modules/acc.so" # -- acc params -- # set the reporting log level modparam("acc", "log_level", 1) modparam("acc", "log_flag", 5) #modparam("acc", "log_extra", "msg_body=$rb") by setting log_level to 1, acc logs would be sent to LOG_LOCAL1 facility, is this right? if not, what i could do to get this logs into a different file? 2) the second problem is that while the acc documentation documents 'log_extra' param: http://www.voice-system.ro/docs/acc-headers/acc.html#AEN308 i'm getting errors the following error: Sep 5 12:46:43 host ser: set_mod_param_regex: parameter <log_extra> not found in module <acc> Sep 5 12:46:43 host ser: parse error (104,19-20): Can't set module parameter what can be done? thanks in advance, topi my /usr/local/ser/etc/ser.cfg: # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 Exp $ # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=3 fifo="/tmp/ser_fifo" sip_warning=0 log_facility=LOG_LOCAL0 alias="192.168.123.2" alias="ser.mynetwork.net" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/ser/lib/ser/modules/mysql.so" loadmodule "/usr/local/ser/lib/ser/modules/sl.so" loadmodule "/usr/local/ser/lib/ser/modules/tm.so" loadmodule "/usr/local/ser/lib/ser/modules/rr.so" loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" loadmodule "/usr/local/ser/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/ser/lib/ser/modules/auth.so" loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so" # accounting loadmodule "/usr/local/ser/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- acc params -- # set the reporting log level modparam("acc", "log_level", 1) # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion status will be reported modparam("acc", "log_flag", 5) #modparam("acc", "failed_transactions", 1) #modparam("acc", "log_extra", "msg_body=$rb") #modparam("acc", "log_extra", "ua=hdr/User-Agent;uuid=avp/i:123") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; if (method == "INVITE" || method== "ACK" || method == "CANCEL" || method == "BYE") { # accounting setflag(5); }; # -------------------------------------------------------------------- # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

2 1

[Serusers] check_via----> how to set this param.
by ravi reddy 15 Sep '06

15 Sep '06

Hi users , I am geting some trouble when i forward a call from remote sip-proxy , because in via messages i am getting private ip-address , in SER admin guide i saw this following:-) "check_via - Turn on or off Via host checking when forwarding replies. Default is no." how to turn off this Via messages. in header fields i mean how to give such param or how to write this in main route block. Thank You. Regards, Ravi.

2 1

RE: [Serusers] How to integrate SER with Jabber IM.
by srinivas sriram 15 Sep '06

15 Sep '06

Hello, Can you please suggest me how to intergrate SER with Jabber IM. Can you help me in correcting my ser.cfg file I am attaching my configuration file ser.cfg. Thank you, Regards, Sriram Srinivas >From: "srinivas sriram" <sriram_srinivas(a)hotmail.com> >To: serusers(a)iptel.org >Subject: [Serusers] How to integrate SER with Jabber IM. Date: Thu, 07 Sep >2006 09:43:52 +0000 > >Hello, > >Can you please suggest me how to intergrate SER with Jabber IM. I am using >SER 0.9.6 version of >SER.Aiming to send a sip messages from the SER client to the Jabber Client. >What are the changes to ser.cfg file and any other setting like Jabber.xml >or MySql Database for >SER intergation with Jabber IM.I am attaching my configuration file >ser.cfg. > > >Thank you, > >Regards, >Sriram Srinivas. > ><< ser.cfg >> >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SIP+PSTN Audio problem
by Siqhamo Sifo 15 Sep '06

15 Sep '06

I have an audio problem with clients behind a nat which are registered on Ser when making calls to a PSTN line I get one way audio i.e. from pstn to sip. But when I make sip-sip calls everything works fine.

1 0

[Users] Where can I find the additional programs / documents?
by Ronald Wiplinger 15 Sep '06

15 Sep '06

The OpenSER Installation Notes mentions at the top, that you should read additional documents, like: admin's guide ISSUES I could not find documents with that names on openser.org. What are the real names / locations of these documents? I also read about additional useful programs, like mediaproxy, rtpproxy, web interface. Where are these? Besides above, what else should I read, or what should I install? What is for you the 'Can-not-live-without' add-ons? bye Ronald

2 1

[Users] Registering ok, but nothing else
by Ronald Wiplinger 15 Sep '06

15 Sep '06

It is my first try, .... forgive me if I ask too complicated. I have installed openser 1.1 and started it. openserctl moni shows me that three phones could register. When I try to call from one phone to the other, the phone will ring, but when I pickup nothing happens. In my first set-up all phones are on the internal network, connected to the internal ethernet port. Firewall cannot be a problem therefore. I followed the OpenSER Installation Notes. What do I miss? How can I make more tests / see more (sothat I do not need to ask here too much)??? bye Ronald

2 1

[Serusers] Registeration failed
by mukesh 15 Sep '06

15 Sep '06

Hi friends, I have successfully installed SER with MySQL support on my linux machine (having public ip) and have added to users leo and mukesh. I have exported SIP_DOMAIN as # export SIP_DOMAIN=ims.myserver.com and added "export SIP_DOMAIN=ims.myserver.com" to /etc/profile as well First Problem --------------------------- If I try below... # /usr/local/sbin/serctl ping sip:mukesh@ims.myserver.com [1]+ Done cat <$path | filter_fl 500 Below is error log extracted from /var/log/messages Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: mk_proxy: could not resolve hostname: "ims.myserver.com" Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: uri2proxy: bad host name in URI <sip:mukesh@ims.myserver.com> Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: uri2sock: Can't create a dst proxy Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: get_hfblock: send_sock failed Sep 15 10:37:30 oradb1 ser: 2(3911) ERROR: fifo_uac_error: no mem for hf block ----------------------------- Second Problem -------------- How can I configure my Nokia6680 as UA (It has SIP support)? any kind of help/suggestion is highly appreciated. Regards Mukesh Kumar

2 1

[Serusers] which linux is best for SER
by vijay tiwari 15 Sep '06

15 Sep '06

i want to install SER on my linux machine can any one tell me the best which linux version suite SER 9.3 Vijay Tiwari Network Admin Sachitel Communications Noida(U.P.) M- 09871633711 --------------------------------- Get your email and more, right on the new Yahoo.com

2 1

[Serusers] allow_trusted"trusted table"
by ravi reddy 14 Sep '06

14 Sep '06

Hi , When i tried to make a incoming call from pstn to SER its asking for proxy authentication required, I had entered the pstngw ip address in trusted table even then the same problem , is any thing else i have to do ;-) how i can cross this problem. Thank You. Regards, Ravi.

3 2

[Users] mediaproxy problem
by Klaus Darilion 14 Sep '06

14 Sep '06

Hi! I'm using openser 1.0 and mediaproxy 1.4.2. I've detected a problem with reINVITEs: 1. cisco7960 calls eyebeam all fine 2. eyebeam puts call on hold all fine 3. eyebeam put call off hold problem: mediaproxy sends packets received from cisco back to cisco (instead of forwarding to eyebeam) I've reviewed the changelog of mediaproxy module and mediaproxy, but this bug fix is not mentioned. I want to avoid unnecessary updating - thus a question to the developers: Where might this bug be located? in the mediaproxy module or in the media proxy? thanks klaus

1 0

[Serusers] ERROR: receive_msg: no mem for sip_msg
by Kristian Larsson 14 Sep '06

14 Sep '06

Hey, I'm having a problem with my sip proxy. "All of a sudden" I'm getting this error message: ERROR: receive_msg: no mem for sip_msg I'm not sure when it started but now as soon as I start it and I get some REGISTER messages it generates the error message. This is a lab machine, I have 5 entries in my subscriber table and not more in any other. I have no idea what triggered this. There's not too much memory on the machine I'm running it (only 256MB) but that shouldn't matter really, there's still quite a lot free. I've tried setting debug=9 but I don't get any more debugging info to work with. Any suggestions on how to proceed? Regards, Kristian. -- Kristian Larsson KLL-RIPE Network Engineer Net At Once [AS35706] email: kristian(a)netatonce.se irc: kll@ircnet phone: +46 470 592717 cell: +46 704 910401

1 1

Re: [Users] sip trunking between carriers
by vallimamod abdullah 14 Sep '06

14 Sep '06

Hello Raviprakash, On 9/14/06, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> wrote: > Hi , > OpenSER is having authenticate feature... > For better Authentication and authorizing, USE Radius...... > Thank for your quick answer. I guess you are talking about the authentification module. My precise need is for proxy-to-proxy authentification as I can't sent back the "407 - Proxy Authentification Required" answer to the PSTN gateway. What I would like is something like this: pstn-gw === INVITE ===> local-openser === INVITE ===> remote-carrier <=== 407 === === INVITE ===> <=== 200 OK === <=== 200 OK === The UAC module can do this but the problem for me is that it can only accept one static (user,password,domain) tuple for all calls. And what I would like is to retrieve a specific tuple from db for each relayed call (depending on the From and R-URI for example.) Any idea on how to achieve this ? Regards, -vma .

1 0

[Users] sip trunking between carriers
by vallimamod abdullah 14 Sep '06

14 Sep '06

Hello list, I have an installation with openser connected to a PSTN gateway and I am offering the possibility to my customers to rent a PSTN trunk to forward long distance calls to a remote SIP carrier via my proxy. My customer usually gets a sip normal account on from remote SIP carrier and my proxy must use to authentificate all invites relayed to this carrier. So my question is: how can I authentificate my proxy to the remote carrier with the credentials given by my customer ? Has anybody already implemented a similar solution ? I have checked the UAC module but it seems to give the ability to set only a static credential on FAILURE_ROUTE. Thanks, -vma .

1 0

Re: [Users] Openser not able to place calls to sipxezphone, no port mentioned in Contact URI
by raviprakash sunkara 14 Sep '06

14 Sep '06

Hi vamsi, I'm 4M Hyderabad, first i need to why using SipXtapi, for me its new... I'm using only openSER, And what is SipXtapi, in VOIP protocal of SIP default having 5060-5064 port, and SIP-proxy forwards 1024-65000, I'm using OpeSER, is best routing calls in voip technologies On 9/14/06, Vamsi Pottangi <vamsipottangi(a)gmail.com> wrote: > > Hi Ravi, > I'm aware of the deafult port 5060, there is some stange problem with > sipxtapi accepting calls on 5060 port. > > I'm from Bangalore, how about you? > > > > On 9/14/06, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> > wrote: > > > > Hi Vasmi > > Nice to meet U.... > > U using the Openser as Proxy.... > > it forwards that ports only... > > I'm not using the SipXtapi , any how , > > sip .. forwards these port only.. > > check the configuring file of sipXtapi..... > > > > I'm using OpenSER , is the Best routing the voip calls... > > > by actually, where r u from > > > > > > > > On 9/14/06, Vamsi Pottangi <vamsipottangi(a)gmail.com > wrote: > > > > > > Hi bogdan and ravi, > > > > > > Thaks for your replies, I narrowed the problem to be sipXtapi related > > > and not with OpenSER. > > > > > > Regards, > > > ~Vamsi > > > > > > > > > On 9/14/06, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com > > > > wrote: > > > > > > > > Hello Vamsi > > > > > > > > When U using the Behind the NAT or inside, > > > > Default port no is 5060, > > > > For UAC or UAS's it may b/w include the RTP port 1024 to 65000 , > > > > openser is forwarding these ports, > > > > > > > > > > > > > > > > On 9/12/06, Vamsi Pottangi < vamsipottangi(a)gmail.com > wrote: > > > > > > > > > Hi All, > > > > > > > > > > Need help on resolving the incomign calls problems with > > > > > sipxezphone which openser as proxy > > > > > > > > > > sizezphone sends "Contact:" URI as > > > > > sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than > > > > > sip:<username>@<ipadd>:<port> > > > > > For the same reason OpenSER is not able to route the incoming > > > > > calls to sipxezphone. > > > > > > > > > > How can I make the sipxezphone(sipxtapi) to send Contact URI with > > > > > port number mentioned? > > > > > > > > > > ~~~Contact(0xb60deb38)~~~ > > > > > domain : 'location' > > > > > aor : 'vamsi' > > > > > Contact : ' sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc' > > > > > Expires : 232 > > > > > q : > > > > > Call-ID : '5dd7235bc92046fd79bb68788a7f5f55' > > > > > CSeq : 1 > > > > > User-Agent: 'sipXezPhone' > > > > > received : '' > > > > > Path : '' > > > > > State : CS_SYNC > > > > > Flags : 0 > > > > > Sock : 192.168.101.35:5060 (0x8145be8) > > > > > Methods : 4294967295 > > > > > next : (nil) > > > > > prev : (nil) > > > > > ~~~/Contact~~~~ > > > > > > > > > > > > > > > > > > > > When I try to do NAT fixing on OpenSER, it records the port from > > > > > which the REGISTER message had recieved and tries to send the INVITE message > > > > > to that port, in this case 1617 rather than 5060. Actually sipzexphone is > > > > > listening on 1617 and 5060 as well which can be found from the below netsta > > > > > -na output > > > > > > > > > > When I snooped the messages, I found that sipzezphone is sending > > > > > register message using port 1617, though the DEFAULT_PORT is 5060 > > > > > > > > > > ~~~Contact(0xb60deb38)~~~ > > > > > domain : 'location' > > > > > aor : 'vamsi' > > > > > Contact : ' sip:vamsi@192.168.101.21 ;LINEID=a9bd64e174dc' > > > > > Expires : 171 > > > > > q : > > > > > Call-ID : 'e1102f18dca4dcb81363d75c605632fa' > > > > > CSeq : 7 > > > > > User-Agent: '' > > > > > received : 'sip: 192.168.101.21:1617' > > > > > Path : '' > > > > > State : CS_SYNC > > > > > Flags : 0 > > > > > Sock : 192.168.101.35:5060 (0x8145be8) > > > > > Methods : 4294967295 > > > > > next : (nil) > > > > > prev : (nil) > > > > > ~~~/Contact~~~~ > > > > > > > > > > C:\Documents and Settings\Administrator>netstat -na > > > > > > > > > > Active Connections > > > > > > > > > > Proto Local Address Foreign Address State > > > > > TCP 0.0.0.0:135 0.0.0.0:0 LISTENING > > > > > TCP 0.0.0.0:445 0.0.0.0:0 LISTENING > > > > > TCP 0.0.0.0:2701 0.0.0.0:0 LISTENING > > > > > TCP 0.0.0.0:2702 0.0.0.0:0 LISTENING > > > > > TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING > > > > > TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING > > > > > TCP 127.0.0.1:19989 0.0.0.0:0 LISTENING > > > > > TCP 192.168.101.21:139 0.0.0.0:0 LISTENING > > > > > TCP 192.168.101.21:1501 192.168.101.35:22 ESTABLISHED > > > > > TCP 192.168.101.21:1554 192.168.101.21:1555 TIME_WAIT > > > > > TCP 192.168.101.21:1615 192.168.101.21:1616 > > > > > ESTABLISHED > > > > > TCP 192.168.101.21:1616 192.168.101.21:1615 ESTABLISHED > > > > > TCP 192.168.101.21:1621 192.168.101.35:5060 ESTABLISHED > > > > > TCP 192.168.101.21:5060 0.0.0.0:0 LISTENING > > > > > UDP 0.0.0.0:445 *:* > > > > > UDP 0.0.0.0:500 *:* > > > > > UDP 0.0.0.0:1036 *:* > > > > > UDP 0.0.0.0:1037 *:* > > > > > UDP 0.0.0.0:1100 *:* > > > > > UDP 0.0.0.0:1508 *:* > > > > > UDP 0.0.0.0:4500 *:* > > > > > UDP 0.0.0.0:4573 *:* > > > > > UDP 0.0.0.0:4588 *:* > > > > > UDP 0.0.0.0:6060 *:* > > > > > UDP 127.0.0.1:123 *:* > > > > > UDP 127.0.0.1:1038 *:* > > > > > UDP 127.0.0.1:1056 *:* > > > > > UDP 127.0.0.1:1075 *:* > > > > > UDP 127.0.0.1:1105 *:* > > > > > UDP 192.168.101.21:123 *:* > > > > > UDP 192.168.101.21:137 *:* > > > > > UDP 192.168.101.21:138 *:* > > > > > UDP 192.168.101.21:1617 *:* > > > > > UDP 192.168.101.21:1618 *:* > > > > > UDP 192.168.101.21:1619 *:* > > > > > UDP 192.168.101.21:1620 *:* > > > > > UDP 192.168.101.21:5060 *:* > > > > > > > > > > C:\Documents and Settings\Administrator> > > > > > > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users(a)openser.org > > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Thanks and Regards with cheers > > > > Sunkara Ravi Prakash (Voip Developer) > > > > Hyperion Technology > > > > www.hyperion-tech.com > > > > +91-9985077535 > > > > > > > > > > > > > > > > -- > > Thanks and Regards with cheers > > Sunkara Ravi Prakash (Voip Developer) > > Hyperion Technology > > www.hyperion-tech.com > > +91-9985077535 > > > > -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535

1 0

[Users] Openser not able to place calls to sipxezphone, no port mentioned in Contact URI
by Vamsi Pottangi 14 Sep '06

14 Sep '06

Hi All, Need help on resolving the incomign calls problems with sipxezphone which openser as proxy sizezphone sends "Contact:" URI as sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than sip:<username>@<ipadd>:<port> For the same reason OpenSER is not able to route the incoming calls to sipxezphone. How can I make the sipxezphone(sipxtapi) to send Contact URI with port number mentioned? ~~~Contact(0xb60deb38)~~~ domain : 'location' aor : 'vamsi' Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc' Expires : 232 q : Call-ID : '5dd7235bc92046fd79bb68788a7f5f55' CSeq : 1 User-Agent: 'sipXezPhone' received : '' Path : '' State : CS_SYNC Flags : 0 Sock : 192.168.101.35:5060 (0x8145be8) Methods : 4294967295 next : (nil) prev : (nil) ~~~/Contact~~~~ When I try to do NAT fixing on OpenSER, it records the port from which the REGISTER message had recieved and tries to send the INVITE message to that port, in this case 1617 rather than 5060. Actually sipzexphone is listening on 1617 and 5060 as well which can be found from the below netsta -na output When I snooped the messages, I found that sipzezphone is sending register message using port 1617, though the DEFAULT_PORT is 5060 ~~~Contact(0xb60deb38)~~~ domain : 'location' aor : 'vamsi' Contact : 'sip:vamsi@192.168.101.21;LINEID=a9bd64e174dc' Expires : 171 q : Call-ID : 'e1102f18dca4dcb81363d75c605632fa' CSeq : 7 User-Agent: '' received : 'sip:192.168.101.21:1617' Path : '' State : CS_SYNC Flags : 0 Sock : 192.168.101.35:5060 (0x8145be8) Methods : 4294967295 next : (nil) prev : (nil) ~~~/Contact~~~~ C:\Documents and Settings\Administrator>netstat -na Active Connections Proto Local Address Foreign Address State TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:2701 0.0.0.0:0 LISTENING TCP 0.0.0.0:2702 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING TCP 127.0.0.1:19989 0.0.0.0:0 LISTENING TCP 192.168.101.21:139 0.0.0.0:0 LISTENING TCP 192.168.101.21:1501 192.168.101.35:22 ESTABLISHED TCP 192.168.101.21:1554 192.168.101.21:1555 TIME_WAIT TCP 192.168.101.21:1615 192.168.101.21:1616 ESTABLISHED TCP 192.168.101.21:1616 192.168.101.21:1615 ESTABLISHED TCP 192.168.101.21:1621 192.168.101.35:5060 ESTABLISHED TCP 192.168.101.21:5060 0.0.0.0:0 LISTENING UDP 0.0.0.0:445 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1036 *:* UDP 0.0.0.0:1037 *:* UDP 0.0.0.0:1100 *:* UDP 0.0.0.0:1508 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:4573 *:* UDP 0.0.0.0:4588 *:* UDP 0.0.0.0:6060 *:* UDP 127.0.0.1:123 *:* UDP 127.0.0.1:1038 *:* UDP 127.0.0.1:1056 *:* UDP 127.0.0.1:1075 *:* UDP 127.0.0.1:1105 *:* UDP 192.168.101.21:123 *:* UDP 192.168.101.21:137 *:* UDP 192.168.101.21:138 *:* UDP 192.168.101.21:1617 *:* UDP 192.168.101.21:1618 *:* UDP 192.168.101.21:1619 *:* UDP 192.168.101.21:1620 *:* UDP 192.168.101.21:5060 *:* C:\Documents and Settings\Administrator>

4 4

[Serusers] (no subject)
by prabhakar g 14 Sep '06

14 Sep '06

hi everybody hey i am trying to installing ser+mysql+nathelper+rtpproxy i am using ser-0.9.6_src.tar. i have intsalled centos without any packages . i installed the ser-0.9.6_src.tar and then then i installed the mysql-databes, but mysql.so module file not loading i head that there a make file in source folder to to make changes before installing the ser. can anybody help abt this topic -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

2 1

[Serusers] uri_db can't connect with mysql
by Quan Huo Sheng 14 Sep '06

14 Sep '06

Hi; uri_db try to init connection with MySQL via /var/run/mysql.sock. But in my machine, the sock path is "/tmp/mysql.sock". I can create ser DB with ser_mysql.sh, ok. Anyone can tell where to configurate this parameter. I am using ser-0.10.99-dev35-pa-4.1. Thanks Smile [This e-mail is confidential and may be priviledged. If you are not the intended recipient, please kindly notify us immediately and delete the message from your system; please do not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] ---ST Electronics Group---

2 1

[Users] Daemon stopping....
by Helge Waastad 14 Sep '06

14 Sep '06

Hi, I have a problem stopping a openser daemon (1.1.0) Does this gdb connected to the remaining child say anything? (gdb) bt #0 0x0000000000456743 in fm_status (qm=0x5eca60) at mem/f_malloc.c:515 #1 0x000000000041f172 in sig_usr (signo=Variable "signo" is not available. ) at main.c:571 #2 <signal handler called> #3 0x0000003fbf5c72ee in __recvfrom_nocancel () from /lib64/tls/libc.so.6 #4 0x000000000044f286 in udp_rcv_loop () at udp_server.c:415 #5 0x000000000041f7f4 in main_loop () at main.c:925 #6 0x0000000000420446 in main (argc=Variable "argc" is not available. ) at main.c:1477 br hw -- Helge Waastad Senior Engineer Systemavdelingen Smartnet

2 3

Re: Out of Office AutoReply: [Users] Openser not able to place callsto sipxezphone, no port mentioned in Contact URI
by raviprakash sunkara 14 Sep '06

14 Sep '06

Hi, Sorry ,,,,, Please use English... for give me On 9/14/06, Strahler, Carsten <Carsten.Strahler(a)lambdanet.net> wrote: > > Vielen Dank für Ihre E-Mail. Ich bin erst am 18.09.2006 wieder im Büro. > Ihre > E-Mail wird nicht weitergeleitet, daher wenden Sie sich bitte in > dringenden > Angelegenheiten an: > > dirk.henze(a)lambdanet.net > +49 173 6291442 > > Mit freundlichen Grüßen, > > Carsten Strahler > LambdaNet Communications AG > -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535

1 0

[Users] function capable of identifying the domain of the callee
by rcarvalho＠iric.up.pt 14 Sep '06

14 Sep '06

Hi, I'm looking for a function capable of identifying the domain of the called so I can implement something like this: if(domain_of_called == domain_A) { do this } if(domain_of_called == domain_B) { do that } The domain_of_called should be extracted from the R-URI and not from the message itself because in some cases (because I'm using multi-domain) if the caller dialled an alias, OpenSer must first determine in aliases table to which user corresponds that alias. Is there a function that does this? Thanks, Ricardo.

2 1

[Users] Help in avp query
by Michel Zenone 14 Sep '06

14 Sep '06

Hi! I try to make the following query but it doesn't work... avp_db_query("select round($avp(i:30)/100)","$avp(i:50)"); As the Mysql server can do the query, I suppose that I made a syntax error in the openser.cfg. Does somebody know what is wrong? Thanks, Michel

2 3

[Users] RE[openser] Redirect on Busy with 486 or Voicemail
by Tracy Lofton 14 Sep '06

14 Sep '06

Hi All, I am still a bit new to openser and I am trying to get the call to respond with busy if caller calls themself from their own UA. I created in the table grp - "voicemail" with corresponding usernames. While in the failure route, I am requesting to route calls to voicemail if the caller is calling a user that is busy or unavailable (but i don't want caller = self in this category), but I get this error for the first openser.cfg snippet: ( 0(31978) parse error (140,19-20): unknown command, missing loadmodule? Also, when I run the avp_check condition by iself without && my program seems to just skip over it and shoots right to the failure route and then redirects to voicemail when busy or unavailable, whether it is the caller calling from their own UA or not. ------------------------------------------------------------------------------------------- Route { .... if (method=="INVITE") { avp_write("$from", "i:34"); if (is_in_group("voicemail") && avp_check("i:34", "eq/$ruri/i")) { <- this is the parse error, line 140 sl_send_reply("486", "Busy Here"); exit; }; avp_delete("i:34"); ........ } .... # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if(method=="INVITE" && !isflagset(10)) { t_on_failure("1"); }; ....... failure_route[1] { if (!t_was_cancelled() | (t_check_status("486") ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable or Busy: Transfer to Voicemail"); setflag(10); route(1); } ---------------------------------------------------------------------------------------------end of first openser.cfg snippet Prior to the above, I have this openser.cfg working somewhat to my wishes by forwarding to the failure route any busy UA and returning a 486 (whether it as caller=callee or not) and for unavailable it would forward to voicemail. Also, I have a backup conditional statement (not shown) for users to dial *981 to reach a UA's voicemail directly to leave voicemail because I cannot get around the busy 486. ________________________________ failure_route[1] { if (t_check_status("486")) { xlog("L_NOTICE", "OPENSER_NAME: $mi $rm $fu -> $ru status 486 Busy Here\n"); exit; } else if (!t_was_cancelled() ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable #1: Transfer to Voicemail"); setflag(10); route(1); } ---------------- end of 2nd openser.cfg snippet Actually, i need help with trying to get it to work right by if caller = self (as a separate condition) then return with 486 busy, and another condition if UA is unavailable or busy then forward to voicemail. I really would like a bit of help. I I hope this makes sense. Thanks, Tracy (The Practitioner) _________________________________________________________________ Call friends with PC-to-PC calling -- FREE http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=…

3 2

[Users] How to do the sip_trace for accounting
by raviprakash sunkara 14 Sep '06

14 Sep '06

Hello Users, Actually the Sip Trace module is for Storing the Incoming and Outgoing sip Messeges in the Databases, For tracing I'll use siptrace() IS the Sip_trace is an event Action to SipServer , If it a event Action , the Record will inserts more... For My better Billing Application is this Module will use for me or not.... Because I don't Want thrid parties CDR Tool , Can Any Help me in this Module ... Sorry For mt English.... X-cuse me -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535

2 1

[Serusers] SERWEB: Please help for "classkit.so and File does not exist: /var/www/html/favicon.ico error message". Please...
by Ferianto siregar 14 Sep '06

14 Sep '06

Dear Karel, Thank you very much for your suggestion. To follow up your suggestion, I install FC4. The php file in Fedora Core 4 are: [root@sip ~]# rpm -qa|grep php php-bcmath-5.0.4-10 php-odbc-5.0.4-10 php-soap-5.0.4-10 php-5.0.4-10 php-snmp-5.0.4-10 php-ldap-5.0.4-10 php-dba-5.0.4-10 php-xmlrpc-5.0.4-10 php-imap-5.0.4-10 php-gd-5.0.4-10 php-pear-5.0.4-10 php-ncurses-5.0.4-10 php-pgsql-5.0.4-10 php-mbstring-5.0.4-10 php-mysql-5.0.4-10 php-xml-5.0.4-10 php-devel-5.0.4-10 [root@sip ~]# rpm -qa|grep mysql mod_auth_mysql-2.6.1-4 mysql-bench-4.1.11-2 mysql-server-4.1.11-2 mysql-devel-4.1.11-2 mysqlclient10-devel-3.23.58-6 freeradius-mysql-1.0.2-2 mysql-4.1.11-2 libdbi-dbd-mysql-0.7.1-3 php-mysql-5.0.4-10 mysqlclient10-3.23.58-6 [root@sip ~]# Then, I tried to install serweb again. But I have still have error message. This is the error message : [root@sip httpd]# tail -f error_log [Wed Sep 13 17:44:23 2006] [notice] LDAP: Built with OpenLDAP LDAP SDK [Wed Sep 13 17:44:23 2006] [notice] LDAP: SSL support unavailable PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 [Wed Sep 13 17:44:23 2006] [notice] mod_python: Creating 4 session mutexes based on 256 max processes and 0 max threads. [Wed Sep 13 17:44:24 2006] [notice] Apache/2.0.54 (Fedora) configured -- resuming normal operations [Wed Sep 13 17:44:52 2006] [error] [client 202.95.149.251] File does not exist: /var/www/html/serweb/htmladmin [Wed Sep 13 17:44:52 2006] [error] [client 202.95.149.251] File does not exist: /var/www/html/favicon.ico [Wed Sep 13 17:46:50 2006] [error] [client 202.95.149.251] File does not exist: /var/www/html/favicon.ico [Wed Sep 13 17:46:56 2006] [error] [client 202.95.149.251] File does not exist: /var/www/html/serweb/htmladmin, referer: http://sip.pcr.ac.id/serweb/ [Wed Sep 13 17:46:57 2006] [error] [client 202.95.149.251] File does not exist: /var/www/html/favicon.ico I have tried top analyze the error, but I can not. What`s wrong? I have add "extension=classkit.so" in php.ini and I have tried to change owner of classkit.so file : # chown apache classkit.so # chmod 777 classkit.so But, still doesn`t work. What happen? What`s "favicon.ico"? I can not find it in /var/www? Would you mind help me again, Karel...Please Thank you very much...Thanks Regards, Ferianto --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail.

1 0

[Serusers] Alias problem if a dash used
by Alan 13 Sep '06

13 Sep '06

Why can't I use a dash "-" for the domain alias in the ser.cfg file? I receive a syntax error with hostname expected. If I use for example: alias=rhvp.domain-1.com

2 1

[Serusers] finding the domain of the Request-URI
by Ricardo Carvalho 13 Sep '06

13 Sep '06

Hi all, Is there a function that returns the domain (the realm) of the Request-URI of INVITE messages? Note that it can't be done using regular expressions that search SIP messages, because of cases where has been dialled an alias of someone from a phone registered with a user that belongs to other domain in a multi-domain environment. Thanks, Ricardo.

3 3

[Serusers] XCAP server
by Henry Duan 13 Sep '06

13 Sep '06

Hi there: I want to test the SIP based endpoint. I'm wondering if there is any open-source XCAP server available for testing, or if SER has the XCAP server module? Thanks so much! henry

1 0

[Users] Problem with Asterisk - Openser Voicemail integration
by Antoine Fressancourt 13 Sep '06

13 Sep '06

Hello, I am trying to setup a voicemail solution based on the tutorial published on voip-info.org called "Realtime Integration of Asterisk with OpenSER" ( http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+With+Op…) and I face an issue. I followed the steps carefully, and I am about to start running the openser server. But when I try to launch the server, two lines are troublesome. My first error is the following : 0(0) ERROR:avpops:fixup_write_avp: bad attribute name in param 2 <i:10> 0(0) ERROR: fix_actions: fixing failed (code=-1) at cfg line 133 It is related to the following line of the openser.cfg : avp_write("$ruri", "i:10"); Then, I comment the line, and another error appears : 0(0) ERROR:avops:fixup_pushto_avp: bad param 1; expected : $pseudo-variable ... 0(0) ERROR: fix_actions: fixing failed (code=-1) at cfg line 200 It is realted to the line : avp_pushto("$ruri", "i:10"); I have the dialplan writen in the tutorial and I run the latest stable version of OpenSER : openser-1.1.0-notls Hopefully someone encontered the same issue, and managed to solve it. Thank you in advance, Antoine

2 2

[Users] ReInvite send twice
by Stefan Römer 13 Sep '06

13 Sep '06

Hi !!! I'm using OpenSER 1.0.1 and realized some strange behaviour when SIP UA sends ReInvite Messages. Initial INVITE shown below (this is OK) UA A OpenSER UA B _____________________________________________________________ --------INVITE------------> -----------INVITE------------> <--------200 OK----------- <---------200 OK---------------- ---------ACK-------------> -------------ACK---------------> But when an UA sends a ReINVITE message I realized following behaviour. This happens approximatly every 3rd or 4th ReInvite. UA A OpenSER UA B _____________________________________________________________ --------INVITE------------> -----------INVITE------------> -----------INVITE------------> <--------200 OK----------- <---------200 OK---------------- <--------200 OK----------- <---------200 OK---------------- . . . . Is there any reason for OpenSER sending ReINVTE twice? Any chance to avoid this? Sincerly Stefan

2 2

[Users] ACK consume_credentials()??
by Greg Fausak 13 Sep '06

13 Sep '06

In an outbound call I am able to use consume_credentials() to get rid of all Authorization: Digest... lines in the header, except for the ACK. Can I strip the header from the ACK? I can't seem to catch it. -g -- Greg Fausak greg(a)thursday.com

2 3

[Users] Siptrace - 200 OK
by Alberto Pacifico 13 Sep '06

13 Sep '06

Hi all, I'm using Openser with siptrace and I'm getting the following sip messages: Invite, Ack, Bye and Cancel. The Openser is recording these messages into sip_trace table (DB openser). I would like to get "200 OK" sip message too. Is it possible?? PS: My openser is working together freeradius and mysql. Thanks Alberto __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 2

[Serusers] fix_nated_contact not rewriting contact?
by kjcsb 13 Sep '06

13 Sep '06

I have the following config: if (client_nat_test("3")) { #IP address in contact is private IP #Via is different to address client has contacted us from #If so then setflag7 to indicate that sender is behind NAT xlog("client nat test 3 returned true for r-uri <$ru> in route 3 so will setflag7"); setflag(7); xlog("contact before update <$ct>"); xlog("via before update <$hdr(via)>"); force_rport(); #Rewrite Contact: header to contain Sip client's public IP:port fix_nated_contact(); xlog("contact is now <$ct>"); xlog("via is now <$hdr(via)>"); }; However the value returned by $ct is the same before and after fix_nated_contact(). Is that because I'm doing something wrong, or because I've misunderstood fix_nated_contact or because the $ct variable doesn't get updated by fix_nated_contact? If the latter, how can I find out the result of fix_nated_contact? The same applies to force_rport and the via details. Any advice appreciated. Regards Cameron

2 1

[Users] missing contact header
by Fatih Cerit 13 Sep '06

13 Sep '06

Hi I want to overwrite the contact header field using textops but some UAs send only an asterisk as a contact (like below). Is this defined in protocol (I didn't find) ? I don't decide what to do . Do I reply with an error or use another field (from,to) as contact thanks REGISTER sip:sip.anywhere.com SIP/2.0 Via: SIP/2.0/UDP 10.0.0.49;branch=z9hG4bK8eaa0451724f9bf4 From: "test" <sip:11223344@sip.anywhere.com;user=phone>;tag=9969d7f94927b840 To: <sip:11223344@sip.anywhere.com;user=phone> Contact: * Call-ID: 0c55cf4a80b02370(a)10.0.0.9 CSeq: 100 REGISTER Expires: 0 User-Agent: Grandstream HT286 1.0.5.11 Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE Content-Length: 0

2 1

[Serusers] ser Problem ?
by prabhakar g 13 Sep '06

13 Sep '06

hi i am new to this any way i am trying to install ser with mysql+nathelper+rtpproxy i installed ser and when i am trying to run ser service i am getting this error 0(4971) parse error (10,1-12): syntax error 0(4971) parse error (10,12-13): unknown config variable 0(4971) parse error (12,1-11): ERROR: bad config file (3 errors) 0(4971) shm_mem_destroy 0(4971) destroying the shared memory lock and this is my cfg file debug=9 fork=yes log_stderror=yes port=5060 check_via=no dns=no rev_dns=no children=4 fifo="/tmp/ser_fifo" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Nathelper Section loadmodule "/usr/local/lib/ser/modules/nathelper.so" # digest authentication loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" modparam("usrloc", "db_mode", 2) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("rr", "enable_full_lr", 1) modparam("group", "db_url", "mysql://ser:heslo@localhost/ser") modparam("uri_db", "db_url", "mysql://ser:heslo@localhost/ser") # Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; if (nat_uac_test("3")) { if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); fix_nated_contact(); if (method == "INVITE") { fix_nated_sdp("1"); }; force_rport(); setflag(6); }; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("siptest.globe7.com", "subscriber")) { www_challenge("siptest.globe7.com", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; if (isflagset(6)) { force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); } else if (nat_uac_test("1")) { fix_nated_contact(); }----------------------------------------------------------- please get me out from this -- Prabhakar.g Network Engineer Northgate Technologies Banjarahils,Hyderabad-34

3 2

[Serusers] SER and CPU usage
by Paco Hsiao 13 Sep '06

13 Sep '06

Hi, All, I am using SER 0.9.6, rtpproxy 0.3 and MySQL 4.1.11. All are running under Fefora Core 4 on one machine. Now, there is a very serious problem that I fork 24 children and each ser's CPU usage is around 15%. Why? I check the count of registered users is only about 600. And the concurrent call is about 20. Why the CPU usage is so large? The idle of CPU is almost 0%. I find the archive that there is a same problem on http://lists.iptel.org/pipermail/serusers/2005-October/024575.html, but he used PGSQL database. Not MySQL DB. Could you help me? Thanks! Regards, Paco

1 0

[Serusers] rewriteuser with something appended
by Ricardo Carvalho 13 Sep '06

13 Sep '06

Hi, How may I append some digits (like "_digits") to the Request-URI of INVITE messages? With rewriteuser("_digits") an INVITE line like: INVITE sip:user@domain:5060;transport=udp SIP/2.0 results in: INVITE sip:_digits@domain:5060;transport=udp SIP/2.0 and I what to result this: INVITE sip:user_digits@domain:5060;transport=udp SIP/2.0 Any suggestion? Thanks, Ricardo.

1 1

[Serusers] Telegram between 2 Clients
by Christian Mickler 13 Sep '06

13 Sep '06

Hi, how can i see the Telegram between 2 Clients by INVITE? Thanks!!!

1 0

[Serusers] SERWEB: classkit.so file can not be loaded. Why? Please help..Please
by Ferianto siregar 13 Sep '06

13 Sep '06

Dear all, Thank you very much to Karel Kozlik and all of you who always kind-hearted to help me. Thank you very much. Karel, I have tried your suggestion in installing serweb. I have installed the DB-1.7.6 and classkit-0.4 . This is the installation message : Build complete. (It is safe to ignore warnings about tempnam and tmpnam). running: make INSTALL_ROOT="/var/tmp/pear-build-root/install-classkit-0.4" insta ll Installing shared extensions: /var/tmp/pear-build-root/install-classkit-0.4/ usr/lib/php/modules/ running: find "/var/tmp/pear-build-root/install-classkit-0.4" -ls 362402 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4 362423 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr 362424 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib 362425 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php 362426 8 drwxr-xr-x 2 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php/modules 362422 60 -rwxr-xr-x 1 root root 49885 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php/modules/classkit.so Build process completed successfully Installing '/var/tmp/pear-build-root/install-classkit-0.4//usr/lib/php/modules/c lasskit.so' install ok: classkit 0.4 Segmentation fault But when I tried to run it in the browser, the error message. The message says : Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit I have add "extension=classkit.so" in php.ini file. But why this message still appear? When I tried to look the error_log file in /var/log/httpd/, I got this error message: [Tue Sep 12 16:59:45 2006] [notice] Digest: generating secret for digest authentication ... [Tue Sep 12 16:59:45 2006] [notice] Digest: done [Tue Sep 12 16:59:45 2006] [notice] LDAP: Built with OpenLDAP LDAP SDK [Tue Sep 12 16:59:45 2006] [notice] LDAP: SSL support unavailable PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 [Tue Sep 12 16:59:45 2006] [notice] mod_python: Creating 4 session mutexes based on 256 max processes and 0 max threads. [Tue Sep 12 16:59:45 2006] [notice] Apache/2.0.54 (Fedora) configured -- resuming normal operations [Tue Sep 12 17:00:04 2006] [error] [client 202.95.149.251] File does not exist: /var/www/serweb/html/favicon.ico [Tue Sep 12 17:00:12 2006] [error] [client 202.95.149.251] File does not exist: /var/www/serweb/html/favicon.ico Sep 12 11:56:07 sip kernel: audit(1158036967.878:16): avc: denied { read } for pid=2958 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:07 sip kernel: audit(1158036967.878:17): avc: denied { read } for pid=2958 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:11 sip kernel: audit(1158036971.482:18): avc: denied { read } for pid=2978 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:11 sip kernel: audit(1158036971.482:19): avc: denied { read } for pid=2978 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file As I read from the error message, the file classkit.so can not be loaded? Why? Would you mind give me a solution? Please.... Thank you very much, Regards, Ferianto Karel Kozlik <karel(a)iptel.org> wrote: Hi, > Thank you much for your help. I am very happy to read this relpy message > from you . Thanks you..thank you very much. > Karel, may I ask you again..Please.. > What you mean by pear library? > I am using Fedora Core 5 and I found these packages are installed in my sorry, I don't know Fedora > > Do you mean that pear library is *php-pear-1.4.6-2 *that is installed? I think so. Karel > or I have install pear again? > Please help me..Karel.. I too lack. Please... > > Thank you very much..Thank you. > > > Regards, > > Ferianto > > */Karel Kozlik /* wrote: > > Hi, > > > 1. I have downloaded from pear.net the DB packet. The version of the > > packet is DB-1.7.6. I have untar it in root directory. I can > found the > > file DB.php in it. But I am confused, where should I place this > > DB.php file? So I can solve this error? Would ypu mind telling > me..Please.. > > Sould I have internet connection to install it? Because I do not > have > > internet connection now. > > Please read the documentation! > http://pear.php.net/manual/en/installation.cli.php > > You should not untar the file in clasic way. You should use: > pear install .tgz > instead. You have to have 'pear' binary installed before, of course. I > don't know what OS are you useing. There should be some package > containing the 'pear' binary. If there is not, read the instructions > here: > http://pear.php.net/manual/en/installation.getting.php > > > > 2. Would you mind telling me what you mean by "fix include_path > in your > > php.ini". > > Would you mind give me an example? Please... > > This mean if you have your pear library in diferent directory (e.g. > /usr/share/foo/bar/pear) you have to append this directory to > 'include_path' variable within php.ini (php configuration file). Read > the comments within php.ini for more info. > > regards Karel > > > ------------------------------------------------------------------------ > Do you Yahoo!? > Everyone is raving about the all-new Yahoo! Mail. > > --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

2 2

[Serusers] Newbie question
by Mario François Jauvin 13 Sep '06

13 Sep '06

Hi, I have installed SER and asterisk on a redhat enterprise 4 linux box. I would like to find out how to: 1. configure SER so that when people dial 9,2226665555 it will redirect the call to asterisk for processing and forwarding to PSTN 2. I heard mentioned several times how asterisk can provide voicemail for SER clients and I would like to know how to set this up so that user can login to their mailbox 3. I would also like to know how users can be notified of their message indicators. 4. In addition to the info above I would like to know if there are links that describe this in greater details. Thanks, Mario

2 1

[Serusers] ser & sems
by Andy Thomas 13 Sep '06

13 Sep '06

Im running the latest ser with sems. Whenever I dial 958 I get the number reader announcement everytime. However when I dial an offline user or conference room, many times I dont get any speech. The call is connected but I just get silence. The server is on a public IP, so no nat issues. Firewall is correct, otherwise I wouldnt get the number reader working! All my fifo's are correct with the correct permissions etc, and my config file must be ok, as sometimes voicemail & conference announcements are played, sometimes not. Sems in debug mode displays this error everytime I get silence rather than the voicemail announcement- (4836) ERROR: stop (AmThread.cpp:99): pthread_detach failed with code EINVAL: thread already in detached state. Any ideas anyone?? Andy Thomas

2 1

[Serusers] Handling 302 responses
by Roger Lewau 13 Sep '06

13 Sep '06

Hello list, I have searched this list for an answer to the 302 response handling problem but found no real solution. It seems no one actually has an aswer for this so I studied the RFC 3261 and found the following statement: The requesting client SHOULD retry the request at the new address(es) given by the contact header field. In my mind that statement is completely off the wall, it is not the requesting client that should be responsible for establishing the forwarded call, it never is in the rest of the telecom industry so why should it be the case for SIP? Instead, this should ofcourse be the responsibility of the forwarding client or the service provider on behalf of the forwarding client. But as the RFC is not crafted that way I need to find a way to handle call forwarding in a proper way so that the cost for the forwarded call ends up on the forwarding clients bill. As call forwarding is a basic requirement in any phone network there must be some one reading this list who has solved this issue that can share there insight. Any help on this issue is highly apreciated. Kind regards Roger Lewau

5 12

[Serusers] SER as fake SBC...
by Natambu Obleton 13 Sep '06

13 Sep '06

I understand that SER is not an SBC, but I can see how it could maybe do it. So I started with hello-world.cfg from the onsip.org crowd and started playing. So I rewrite the contact address to send the address and port of the SER server and that works. I can make calls out, but when call come in they get routed to SER and it fails because my UA is not in the location database. # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { if (method=="REGISTER") { if (!subst('/Contact: <sip:(.*)@(.*)>/Contact: <sip:\1@206.123.214.55:5060>/ig')) { log("******************************SUBST FAILED ************************************\n"); }; # save("location"); }; if (!t_relay()) { sl_reply_error(); }; break; }; When I have 'save("location")' in my configuration, Then I don't get registered with my softswitch. So what does 'save("location")' do exactly? Beside put an entry in my location database? Thanks. In my setup I am not using NAT at all. UA, SER, and my softswitch all have public ip addresses. Natambu Obleton Network Engineer FastTrack Communications nobleton(a)fasttrackcomm.net (970) 247-3366 office (970) 247-2426 fax

2 6

[Serusers] Need to work on subst().
by ravi reddy 13 Sep '06

13 Sep '06

Hi Ricardo , I too need the same process which you had done by subst(); function. two weeks back i had posted a mail to ser-users . regarding this issue. because one call-shop with the small sip-proxy using private ip-adress controls the remaing phones . and with one username i am giving access to all phones so that i can bill for one account only . but when a sip-phone registered to that callshop make call it forwards to my SER with contact id as eg: 12345(a)192.168.2.101 .so, the call comes in as it just requires authorise but when we hung the phone the "BYE" messages are not recieving by both end parties because SER is sending "BYE" messages to that contact-id that is private ip so call became "idle" for 30-40 seconds and after it shut down. so now i need to rewrite the contact part of that private ip-address and just use NAT ipadress of that sip-proxy(call-shop) i saw your subst(); funct. in your mail but i dont know where and how to use that,(I am not a programmer) So how you suggest me to do that for rewriting any private ip-adresss and replacing NAT-address so that the call will ends when it recieve "BYE" message . below is the trace of that: U 82.102.69.105:39871 -> 81.21.33.35:5060 INVITE sip:99106883@81.21.33.35:5060 SIP/2.0. To: "99106883"<sip:99106883@81.21.33.35 :5060>. From: "12345"<sip:12345@81.21.33.35:5060>;tag=c86b66ad8b9187c8. Via: SIP/2.0/UDP 192.168.1.100:5060;branch=z9hG4bK-d87543-bcf89635ebeba2e78782465686dfaf52-1--d87543-;rport. Via: SIP/2.0/UDP 192.168.1.102 ;branch=z9hG4bKf638e18b56022ea3. Call-ID: a78d5c993a9dd6b4(a)192.168.1.102. CSeq: 47344 INVITE. Record-Route: <sip:192.168.1.100:5060>. Contact: <sip: 192.168.1.100:5060>. Max-Forwards: 69. Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE. Content-Type: application/sdp. Supported: replaces. User-Agent: Grandstream BT110 1.0.8.23 . Content-Length: 361. Ricardo here i need to replace contact<sip:192.168.1.100> with above NAT ip address that is with 82.102.69.105:39871 how ??/ please assist me so that i can solve my problem. Thank You. Regards, Ravi.

2 1

[Users] jabber
by Javier Ramirez 13 Sep '06

13 Sep '06

Anyone has experience with jabber module ? I have a jabber server working, and openser working but I can't connect both. please, send me an example of openser.cfg if you want. best regards Javier

2 3

[Serusers] jabber
by Javier Ramirez 13 Sep '06

13 Sep '06

Anyone has experience with jabber module ? I have a jabber server working, and ser working but I can't connect both. please, send me an example of ser.cfg if you want. best regards Javier

2 1

Re: [Users] 513 Message too big
by Greg Fausak 13 Sep '06

13 Sep '06

Bill, I think there is different syntax for this, I used to use something like: if(len_gt(max_len)) { } But, I don't check for max length any more. Operating system assembly/disassembly for packets bigger than the mtu is transparent to me, I often work with big packets. Also, the mtu is different depending on where you look. I think some of the gig-ethernets use jumbo packets, then there is the 1500 byte or so regular mtu, then there is also possible modifications to the mtu depending on what the local transport is (cable, dsl, frame relay, etc). I still check for max hops :-) -g On Sep 12, 2006, at 8:38 PM, Bill Zhang wrote: > OK, I solved the problem(though I don't understand how it solved) > by adding > alias=" sip.mydomain.com", thanks to my old experience with SER:). > > Bill > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] > On Behalf > Of Bill Zhang > Sent: Tuesday, September 12, 2006 2:18 PM > To: users(a)openser.org > Subject: RE: [Users] 513 Message too big > > It does not help me here:(. I will get "Too Many Hops" (SIP > response 483), > it's something that seems to get my SIP message stuck in the first 2 > routines. > > Bill > -----Original Message----- > From: Ka Lun Chan (KC) [mailto:kchan1028@gmail.com] > Sent: Tuesday, September 12, 2006 1:04 PM > To: 'Bill Zhang' > Subject: RE: [Users] 513 Message too big > > I have the exact problem. I fixed by changing it to the following > instead: > > if (msg:len >= max_len ) { > sl_send_reply("513", "Message too big"); > return; > }; > > KC > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] > On Behalf > Of Bill Zhang > Sent: Tuesday, September 12, 2006 12:59 PM > To: users(a)openser.org > Subject: [Users] 513 Message too big > > Hi, > > I've exhausted my knowledge on openser:(. Following is my > openser.cfg which > is pretty much copy directly from sample but I kept getting "513 > Message too > big" response from this server for SIP registration, I know the SIP > registration message size is ONLY 555 bytes, what could be wrong here? > > Thanks in Advance! > > # > # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=4 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=yes # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/openser_fifo" > > # > # uncomment the following lines for TLS support > #disable_tls = 0 > #listen = tls:your_IP:5061 > #tls_verify = 1 > #tls_require_certificate = 0 > #tls_method = TLSv1 > #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" > #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" > #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib64/openser/modules/mysql.so" > loadmodule "/usr/local/lib64/openser/modules/sl.so" > loadmodule "/usr/local/lib64/openser/modules/tm.so" > loadmodule "/usr/local/lib64/openser/modules/rr.so" > loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" > loadmodule "/usr/local/lib64/openser/modules/usrloc.so" > loadmodule "/usr/local/lib64/openser/modules/registrar.so" > loadmodule "/usr/local/lib64/openser/modules/textops.so" > loadmodule "/usr/local/lib64/openser/modules/auth.so" > loadmodule "/usr/local/lib64/openser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > #modparam("usrloc", "db_mode", 0) > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "db_url", "mysql://openser:passwd@localhost/ > openser") > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > modparam("auth_db", "db_url", "mysql://openser:passwd@localhost/ > openser") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") > record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > # if you have some interdomain connections via TLS > #if(uri=~"@tls_domain1.net") { > # t_relay("tls:domain1.net"); > # exit; > #} else if(uri=~"@tls_domain2.net") { > # t_relay("tls:domain2.net"); > # exit; > #} > route(1); > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > if (!www_authorize("sip.mydomain.com", > "subscriber")) { > www_challenge("sip.mydomain.com", > "0"); > exit; > }; > > save("location"); > exit; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > }; > > # native SIP destinations are handled using our > USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > exit; > }; > append_hf("P-hint: usrloc applied\r\n"); > }; > > route(1); > } > > > route[1] { > # send it out now; use stateful forwarding as it works > reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > Bill > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

1 0

RE: [Users] 513 Message too big
by Bill Zhang 13 Sep '06

13 Sep '06

OK, I solved the problem(though I don't understand how it solved) by adding alias=" sip.mydomain.com", thanks to my old experience with SER:). Bill -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, September 12, 2006 2:18 PM To: users(a)openser.org Subject: RE: [Users] 513 Message too big It does not help me here:(. I will get "Too Many Hops" (SIP response 483), it's something that seems to get my SIP message stuck in the first 2 routines. Bill -----Original Message----- From: Ka Lun Chan (KC) [mailto:kchan1028@gmail.com] Sent: Tuesday, September 12, 2006 1:04 PM To: 'Bill Zhang' Subject: RE: [Users] 513 Message too big I have the exact problem. I fixed by changing it to the following instead: if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); return; }; KC -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, September 12, 2006 12:59 PM To: users(a)openser.org Subject: [Users] 513 Message too big Hi, I've exhausted my knowledge on openser:(. Following is my openser.cfg which is pretty much copy directly from sample but I kept getting "513 Message too big" response from this server for SIP registration, I know the SIP registration message size is ONLY 555 bytes, what could be wrong here? Thanks in Advance! # # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib64/openser/modules/mysql.so" loadmodule "/usr/local/lib64/openser/modules/sl.so" loadmodule "/usr/local/lib64/openser/modules/tm.so" loadmodule "/usr/local/lib64/openser/modules/rr.so" loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" loadmodule "/usr/local/lib64/openser/modules/usrloc.so" loadmodule "/usr/local/lib64/openser/modules/registrar.so" loadmodule "/usr/local/lib64/openser/modules/textops.so" loadmodule "/usr/local/lib64/openser/modules/auth.so" loadmodule "/usr/local/lib64/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:passwd@localhost/openser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:passwd@localhost/openser") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("sip.mydomain.com", "subscriber")) { www_challenge("sip.mydomain.com", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } Bill _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

RE: [Serusers] Redirect on Busy with 486 or Voicemail
by Tracy Lofton 13 Sep '06

13 Sep '06

Hi All, I am still a bit new to openser and I am trying to get the call to respond with busy if caller calls themself from their own UA. I created in the table grp - "voicemail" with corresponding usernames. While in the failure route, I am requesting to route calls to voicemail if the caller is calling a user that is busy or unavailable (but i don't want caller = self in this category), but I get this error for the first openser.cfg snippet: ( 0(31978) parse error (140,19-20): unknown command, missing loadmodule? Also, when I run the avp_check condition by iself without && my program seems to just skip over it and shoots right to the failure route and then redirects to voicemail when busy or unavailable, whether it is the caller calling from their own UA or not. ------------------------------------------------------------------------------------------- Route { ... if (method=="INVITE") { avp_write("$from", "i:34"); if (is_in_group("voicemail") && avp_check("i:34", "eq/$ruri/i")) { <- this is the parse error, line 140 sl_send_reply("486", "Busy Here"); exit; }; avp_delete("i:34"); ....... } ... # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if(method=="INVITE" && !isflagset(10)) { t_on_failure("1"); }; ...... failure_route[1] { if (!t_was_cancelled() | (t_check_status("486") ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable or Busy: Transfer to Voicemail"); setflag(10); route(1); } ---------------------------------------------------------------------------------------------end of first openser.cfg snippet Prior to the above, I have this openser.cfg working somewhat to my wishes by forwarding to the failure route any busy UA and returning a 486 (whether it as caller=callee or not) and for unavailable it would forward to voicemail. Also, I have a backup conditional statement (not shown) for users to dial *981 to reach a UA's voicemail directly to leave voicemail because I cannot get around the busy 486. ________________________________ failure_route[1] { if (t_check_status("486")) { xlog("L_NOTICE", "OPENSER_NAME: $mi $rm $fu -> $ru status 486 Busy Here\n"); exit; } else if (!t_was_cancelled() ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable #1: Transfer to Voicemail"); setflag(10); route(1); } ---------------- end of 2nd openser.cfg snippet Actually, i need help with trying to get it to work right by if caller = self (as a separate condition) then return with 486 busy, and another condition if UA is unavailable or busy then forward to voicemail. I really would like a bit of help. I I hope this makes sense. Thanks, Tracy (The Practitioner) _________________________________________________________________ Check the weather nationwide with MSN Search: Try it now! http://search.msn.com/results.aspx?q=weather&FORM=WLMTAG

1 1

[Users] Redirect on Busy with 486 or Voicemail
by Tracy Lofton 13 Sep '06

13 Sep '06

Hi All, I apologize for rewriting most of this, but I do not know how to continue a thread from a prior email. I am new. I fixed the parse error from a prior email request by adding the R-URI but I am still trying to get the call to respond with busy if caller calls themself from their own UA. I created in the table grp - "voicemail" with corresponding usernames. While in the failure route, I am requesting to route calls to voicemail if the caller is calling a user that is busy or unavailable (but i don't want caller = self in this category). When I run the avp_check condition, the program seems to just skip over it and shoots right to the failure route and then redirects to voicemail when busy or unavailable, whether it is the caller calling from their own UA or not. ------------------------------------------------------------------------------------------- Route { ..... if (method=="INVITE") { avp_write("$from", "i:34"); if (is_in_group("Request-URI", "voicemail") && avp_check("i:34", "eq/$ruri/i")) { sl_send_reply("486", "Busy Here"); exit; }; avp_delete("i:34"); ......... } ..... # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if(method=="INVITE" && !isflagset(10)) { t_on_failure("1"); }; ........ failure_route[1] { if (!t_was_cancelled() | (t_check_status("486") ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable or Busy: Transfer to Voicemail"); setflag(10); route(1); } ---------------------------------------------------------------------------------------------end of first openser.cfg snippet Prior to the above, I have this openser.cfg working somewhat to my wishes by forwarding to the failure route any busy UA and returning a 486 (whether it as caller=callee or not) and for unavailable it would forward to voicemail. Also, I have a backup conditional statement (not shown) for users to dial *981 to reach a UA's voicemail directly to leave voicemail because I cannot get around the busy 486. ________________________________ failure_route[1] { if (t_check_status("486")) { xlog("L_NOTICE", "OPENSER_NAME: $mi $rm $fu -> $ru status 486 Busy Here\n"); exit; } else if (!t_was_cancelled() ) { revert_uri(); rewritehostport("mydomain.com:5065"); append_branch(); xlog("L_INFO", "Temporarily Unavailable #1: Transfer to Voicemail"); setflag(10); route(1); } ---------------- end of 2nd openser.cfg snippet Actually, i need help with trying to get it to work right by if caller = self (as a separate condition) then return with 486 busy, and another condition if UA is unavailable or busy then forward to voicemail. I really would like a bit of help. I I hope this makes sense. Thanks, Tracy (The Practitioner) _________________________________________________________________ Get real-time traffic reports with Windows Live Local Search http://local.live.com/default.aspx?v=2&cp=42.336065~-109.392273&style=r&lvl…

1 0

RE: [Users] 513 Message too big
by Bill Zhang 12 Sep '06

12 Sep '06

It does not help me here:(. I will get "Too Many Hops" (SIP response 483), it's something that seems to get my SIP message stuck in the first 2 routines. Bill -----Original Message----- From: Ka Lun Chan (KC) [mailto:kchan1028@gmail.com] Sent: Tuesday, September 12, 2006 1:04 PM To: 'Bill Zhang' Subject: RE: [Users] 513 Message too big I have the exact problem. I fixed by changing it to the following instead: if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); return; }; KC -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bill Zhang Sent: Tuesday, September 12, 2006 12:59 PM To: users(a)openser.org Subject: [Users] 513 Message too big Hi, I've exhausted my knowledge on openser:(. Following is my openser.cfg which is pretty much copy directly from sample but I kept getting "513 Message too big" response from this server for SIP registration, I know the SIP registration message size is ONLY 555 bytes, what could be wrong here? Thanks in Advance! # # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib64/openser/modules/mysql.so" loadmodule "/usr/local/lib64/openser/modules/sl.so" loadmodule "/usr/local/lib64/openser/modules/tm.so" loadmodule "/usr/local/lib64/openser/modules/rr.so" loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" loadmodule "/usr/local/lib64/openser/modules/usrloc.so" loadmodule "/usr/local/lib64/openser/modules/registrar.so" loadmodule "/usr/local/lib64/openser/modules/textops.so" loadmodule "/usr/local/lib64/openser/modules/auth.so" loadmodule "/usr/local/lib64/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:passwd@localhost/openser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:passwd@localhost/openser") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("sip.mydomain.com", "subscriber")) { www_challenge("sip.mydomain.com", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } Bill _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

Re: [Users] 513 Message too big
by Norman Brandinger 12 Sep '06

12 Sep '06

Hi Bill, My msg:len line is as follows: if (msg:len >= max_len) { Perhaps there is an issue with the parsing of the size value you have specified. Regards, Norm Bill Zhang wrote: > Hi, > > I've exhausted my knowledge on openser:(. Following is my openser.cfg which > is pretty much copy directly from sample but I kept getting "513 Message too > big" response from this server for SIP registration, I know the SIP > registration message size is ONLY 555 bytes, what could be wrong here? > > Thanks in Advance! > > # > # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=4 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=yes # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/openser_fifo" > > # > # uncomment the following lines for TLS support > #disable_tls = 0 > #listen = tls:your_IP:5061 > #tls_verify = 1 > #tls_require_certificate = 0 > #tls_method = TLSv1 > #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" > #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" > #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib64/openser/modules/mysql.so" > loadmodule "/usr/local/lib64/openser/modules/sl.so" > loadmodule "/usr/local/lib64/openser/modules/tm.so" > loadmodule "/usr/local/lib64/openser/modules/rr.so" > loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" > loadmodule "/usr/local/lib64/openser/modules/usrloc.so" > loadmodule "/usr/local/lib64/openser/modules/registrar.so" > loadmodule "/usr/local/lib64/openser/modules/textops.so" > loadmodule "/usr/local/lib64/openser/modules/auth.so" > loadmodule "/usr/local/lib64/openser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > #modparam("usrloc", "db_mode", 0) > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "db_url", "mysql://openser:passwd@localhost/openser") > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > modparam("auth_db", "db_url", "mysql://openser:passwd@localhost/openser") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") > record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > # if you have some interdomain connections via TLS > #if(uri=~"@tls_domain1.net") { > # t_relay("tls:domain1.net"); > # exit; > #} else if(uri=~"@tls_domain2.net") { > # t_relay("tls:domain2.net"); > # exit; > #} > route(1); > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > if (!www_authorize("sip.mydomain.com", > "subscriber")) { > www_challenge("sip.mydomain.com", "0"); > exit; > }; > > save("location"); > exit; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > exit; > }; > append_hf("P-hint: usrloc applied\r\n"); > }; > > route(1); > } > > > route[1] { > # send it out now; use stateful forwarding as it works reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > Bill > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > >

1 0

[Serusers] function capable of identifying the domain of the callee
by Ricardo Carvalho 12 Sep '06

12 Sep '06

Hi, I'm looking for a function capable of identifying the domain of the callee so I can implement something like this: if(domain_of_callee == domain_A) { do this } if(domain_of_callee == domain_B) { do that } I know that there are some functions like those in textops module, but the problem is that I can't search in the INVITE messages for that because I what that to be searched in INVITE messages sent from Ser to Asterisk for Voicemail purpose, and in that cases, the domain of the callee was already replaced by the IP of Asterisk server in those messages, and To and From parameters can have other domains because I'm using multi-domain implementation. Is there a function that does this? Thanks, Ricardo.

1 0

[Users] presence server
by henri.keski-sikkila＠sesca.com 12 Sep '06

12 Sep '06

Hello, Are there any plans that OpenSER could be used as presence server? I'm using SER presence server, but I would like to use OpenSER. There is pa module in OpenSER, but it is some how broken? Best Regards Henri Keski-Sikkila

2 1

[Serusers] Call generator
by Daniel Mirrha Santos 12 Sep '06

12 Sep '06

Does anybody know a software that generates simultaneous calls in sip or h323 for tests? Thanks, Daniel

3 2

[Users] jabber module
by Javier Ramirez 12 Sep '06

12 Sep '06

Anyone has experience with jabber module ? I have a jabber server working, and openser working but I can't connect both. please, send me an example of openser.cfg if you want. best regards Javier

1 0

[Users] Can someone explain
by nick 12 Sep '06

12 Sep '06

or point me to some documentation as to what append_hf() actually does? I see it throughout my openser.cfg, but it's not in the openser cookbook, or other visible documentation. Does it add a hint to log files, or actually include information in some other place? Thanks for any clues.. Nick

3 3

Re: [Serusers] Reload Ser configuration and DB in runtime?
by Andrey Kouprianov 12 Sep '06

12 Sep '06

Hi, You certainly cannot make ser accept changes made to a configuration file during runtime. Take a look for instance at apache http server or should i say almost any server on Linux.. None of them allows accepting configurations dynamically. :) Besides, some threads in this list already discussed this issue. As for database, Im not sure.. But what exactly are you expecting to be reloaded automatically? Andrey.

4 5

[Serusers] how to setup mediaproxy on remote server
by Ranjeet Kumar 12 Sep '06

12 Sep '06

Hi, I am able to setup mediaproxy on same sip proxy server. I want to setup mediaproxy on different server. Could you please help me in setting up mediaproxy on remote server. Thanks, Ranjeet The information contained in, or attached to, this e-mail, contains confidential information and is intended solely for the use of the individual or entity to whom they are addressed and is subject to legal privilege. If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email. www.aztecsoft.com

1 0

[Serusers] can ser support IPV6??
by P Jayasree 12 Sep '06

12 Sep '06

Hi, can somebody tell me which version of ser supports IPV6? Thanks in advance, Regards, Jayasree. The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail immediately and permanently delete the message and any attachments.

2 1

[Serusers] Can't cancel a forwarding call to Asterisk
by Paco Hsiao 12 Sep '06

12 Sep '06

Hi all, I configure ser to forward a call to Asterisk when callee is busy or unanswered. But, when the call is forwarding and the caller cancels the call, ser still forward the call to Asterisk and won't cancel the call. How do I really cancel the call and stop forwarding to Asterisk? I will be appreciate for any help! Here are my ser.cfg: # $Id: nat-rtpproxy.cfg 9 2005-08-19 15:30:55Z /CN=Greger V. Teigre/emailAddress=greger(a)onsip.org $ debug=3 fork=yes log_stderror=no listen=192.168.10.114 # INSERT YOUR IP ADDRESS HERE port=5060 children=8 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 15) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 20) modparam("tm", "fr_inv_timer_avp", "inv_timeout") route { # xlog("L_INFO", "<%mb>\n"); # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("1"); }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(1); break; } else if (method=="BYE") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; #sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); } lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (uri=~"^sip:999[0-9]*@") { strip(3); route(4); route(5); break; }; if (!lookup("location")) { route(4); route(5); break; }; t_on_failure("1"); route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehost("192.168.10.124"); avp_write("i:90", "inv_timeout"); route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } failure_route[1] { if (t_check_status("487")) { unforce_rtp_proxy(); break; } if (t_check_status("486") || t_check_status("408")) { revert_uri(); rewritehost("192.168.10.124"); avp_write("i:90", "inv_timeout"); append_branch(); t_relay(); break; }; unforce_rtp_proxy(); }

1 0

[Serusers] Help with error
by Steve Blair 12 Sep '06

12 Sep '06

I am trying to relay calls from an on campus IP phone to proxy #1 then to proxy #2 then to an on campus gateway. The INVITE reaches the gateway but I get the "I'm sorry we cannot complete your call" recording from my carrier. Proxy #1's log shows the following error. "t_newtran: transaction already in process 0xb61d9a30" I found the following via google but the post doesn't describe how to fix the error. Is the only recourse to restructure the existing ser.cfg file or does the uac module provide a function to handle this situation? http://www.openser.org/pipermail/users/2006-April/003899.html Thanks,Steve -- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104 voice: 215-573-8396 215-746-8001 fax: 215-898-9348 sip:blairs@net.isc.upenn.edu

2 2

Fwd: [Users] Sip trace on ...
by raviprakash sunkara 12 Sep '06

12 Sep '06

---------- Forwarded message ---------- From: raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> Date: Sep 12, 2006 8:49 AM Subject: Re: [Users] Sip trace on ... To: Alberto Pacifico <alberto_pacifico(a)yahoo.com> Hi Alberto , Thanks For reply, and Nice to met U , What u'd told , I had done before only, Can U tell, Who to process openser with sip_trace .... On 9/11/06, Alberto Pacifico <alberto_pacifico(a)yahoo.com> wrote: > > > Hi Sunkara, > > If you are working with Openser 1.1.0, you need to > configure the file named "openserctlrc" with the > database's informations. > > Good Luck! > > Alberto > > --- raviprakash sunkara > <sunkara.raviprakash.feb14(a)gmail.com> wrote: > > > Hi Users, > > > > I'm trying the sip_traces ,,,, > > > > When I typed below command , I got these errors > > openserctl fifo sip_trace on > > database engine 'MYSQL' loaded > > Control engine 'FIFO' loaded > > entering fifo_cmd sip_trace on > > ERROR: Error opening openser's FIFO FIFO > > ERROR: Make sure you have line fifo=FIFO in your > > config > > > > > > > > > > -- > > Thanks and Regards with cheers > > Sunkara Ravi Prakash (Voip Developer) > > Hyperion Technology > > www.hyperion-tech.com > > +91-9985077535 > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535 -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535

2 2

[Users] Cisco 5350
by Dan 12 Sep '06

12 Sep '06

Anybody able to get cisco 5350 register with openser using username and password. Am using openser 1.0.1 with mysql authentication. When I try to send calls from cisco , I get 401 unauthorised. Have made entries in sip-ua : authentication username 90557 password 06575A751F1B504C5D42455C28 realm xxx.xxx.xxx.xxx registrar ipv4:xxx.xxx.xxx.xxx expires 3600 Under dialpeer : session target ipv4:xxx.xxx.xxx.xxx Where xxx.xxx.xxx.xxx is the ip address of openser. Can anyone point out the problem? Regards DAN

1 0

[Users] Suppression of Silence Suppression
by Federico Giannici 12 Sep '06

12 Sep '06

Is there any way to force the disabling of the "silence suppression" for an RTP stream? I'd like to disable it at the SIP proxy, maybe modifying some SDP attribute... Thanks. -- ___________________________________________________ __ |- giannici(a)neomedia.it |ederico Giannici http://www.neomedia.it ___________________________________________________

3 3

[Users] Q:ABOUT:DETECT IF A PART IS KEEP ALIVE
by Alejandro Sanchez 12 Sep '06

12 Sep '06

Hello. My scenario is the next. I have two sip phones and i need when one of them dissconnect (for reasons different to the request user posible errors) stop the accounting. What's the correct form tio implement this? Thank's in advanced. ___________________________________________________________ Do You Yahoo!? La mejor conexión a Internet y <b >2GB</b> extra a tu correo por $100 al mes. http://net.yahoo.com.mx

2 1

[Serusers] Reload Ser configuration and DB in runtime?
by Ricardo Carvalho 12 Sep '06

12 Sep '06

How may I reload Ser configuration file, or alterations made in DB tables in Ser runtime, without killing the Call leg of transactions in progress at that time? Thanks, Ricardo.

3 3

[Users] Help in redirection server
by Michel Zenone 12 Sep '06

12 Sep '06

Hi! I try to make my openser act as a redirection server when a customer is unavailable. And I need to know, receiving an INVITE, if this INVITE is due to a redirection or not. Does somebody have an idea to get this information? Thanks in advance, Michel

2 1

[Serusers] Help in redirection server
by Michel Zenone 12 Sep '06

12 Sep '06

Hi! I try to make my SIP proxy act as a redirection server when a customer is unavailable. And I need to know, receiving an INVITE, if this INVITE is due to a redirection or not. Does somebody have an idea to get this information? Thanks in advance, Michel

1 0

[Users] action.c:1: error: bad value (x86_64) for -mtune= switch
by Ronald Wiplinger 12 Sep '06

12 Sep '06

First try to compile Openser on an AMD Semperon CPU: openser-1.1.0-tls> make all Compiling action.c gcc -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -ftree-vectorize -mtune=x86_64 -DNAME='"openser"' -DVERSION='"1.1.0-notls"' -DARCH='"x86_64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.0"' -D__CPU_x86_64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DF_MALLOC -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c action.c -o action.o action.c:1: error: bad value (x86_64) for -mtune= switch make: *** [action.o] Error 1 How can I solve that? bye Ronald

2 3

[Serusers] Show registered users in ser
by Jan Schumacher 12 Sep '06

12 Sep '06

Hallo, how can I show the registered users in ser ? Is there a way like ''sip show registry'' on the terminal? thanks in advance Jan

3 2

[Serusers] Can I have separate sip proxy & sip registrar?
by Ranjeet Kumar 12 Sep '06

12 Sep '06

Hi, I want to deploy the sip server, where I want one server as sip proxy and other as registrar. Is it possible in SER? Thanks, Ranjeet The information contained in, or attached to, this e-mail, contains confidential information and is intended solely for the use of the individual or entity to whom they are addressed and is subject to legal privilege. If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email. www.aztecsoft.com

2 1

[Serusers] Re: rewrite the FROM part of SIP INVITE
by Alex Fler 12 Sep '06

12 Sep '06

Hello guys, Sorry for a stupid question, but how do you actually rewrite the FROM part of SIP INVITE ? Do you use avp ? Could someone give me an example ? Thanks to all Alex Fler

6 8

[Serusers] deference between rtpproxy and mediaproxy
by vijay tiwari 12 Sep '06

12 Sep '06

hi what is the deference between rtpporxy and mediaproxy with regards Vijay Tiwari Network Admin Sachitel Communications Noida(U.P.) M- 09871633711 --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail.

6 8

[Serusers] SER - Avoid some sip message
by Damian Nardelli 11 Sep '06

11 Sep '06

How can i transform a 183 Session Progress into a 180 Ringing? is it possible not to redirect a message SIP from the configuration file (for example the "183 Session Progress")? How can i do that? Thanks. Damián

1 0

[Serusers] Grandstream Budgetone phones don't show alphanumeric caller right
by Ricardo Carvalho 11 Sep '06

11 Sep '06

I have tested "Grandstream Budgetone 102" and "Grandstream Budgetone 200" and with both, if they are called from a caller that is an alphanumeric user, their display shows a unintelligible name impossible to figure out who is calling!! If the caller is a numeric one, in both phones their display shows correctly the caller's contact. I've updated their firmwares to the latest ones and that problem persists... Does anybody also experienced this? Thanks, Ricardo.

1 1

[Users] Sip trace on ...
by raviprakash sunkara 11 Sep '06

11 Sep '06

Hi Users, I'm trying the sip_traces ,,,, When I typed below command , I got these errors openserctl fifo sip_trace on database engine 'MYSQL' loaded Control engine 'FIFO' loaded entering fifo_cmd sip_trace on ERROR: Error opening openser's FIFO FIFO ERROR: Make sure you have line fifo=FIFO in your config -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535

1 0

[Users] openser dialog statistics
by Greg Fausak 11 Sep '06

11 Sep '06

I've been attempting to get statistics for dialogs to work for me: I've loaded the dialog.so module, and set the dlg_flag to 2. However, I've not been able to see dialogs open or close when I use the openserctl get_statistics all call. I know statistics are working because I put them in, increment them in the routing script, and I see them in the openserctl get_statistics output. Can somebody post an example of how to get dialog counting to work? Thanks, -g -- Greg Fausak greg(a)thursday.com

2 2

[Users] Re: [Serweb-users] Can serweb-0.9.4 run in openser? Please help....
by Ferianto siregar 11 Sep '06

11 Sep '06

Dear Karel, Thank you very much again for your kind-hearted. Thank you very much. I am sorry Karel. If I can make a wish to you again, I have some questions anymore. Can I? Please... :) 1. I have downloaded from pear.net the DB packet. The version of the packet is DB-1.7.6. I have untar it in root directory. I can found the file DB.php in it. But I am confused, where should I place this DB.php file? So I can solve this error? Would ypu mind telling me..Please.. Sould I have internet connection to install it? Because I do not have internet connection now. 2. Would you mind telling me what you mean by "fix include_path in your php.ini". Would you mind give me an example? Please... I do hope you can help me. I know that I am still nwe in this system and I have lack skill in this system. Please help me...Please.. Thank you very much... Regards, Ferianto Karel Kozlik <karel(a)iptel.org> wrote: Hi, it looks like php-pear is not installed or php can't find it. Check if file DB.php (from the PEAR library) is in dir /usr/share/pear. If not, install php pear into this dir, or fix include_path in your php.ini. More info about php-pear you could find at http://pear.php.net regards Karel Ferianto siregar napsal(a): > Dear all, > > Thanks to every body in this forum for help me.. Thank you. > > All, now I try to build serweb-0.9.4 in openser-1.1.0-tls. I have ever > got a message from this forum that the serweb-0.9.4 can work sucessfully > in openser-1.1.0. > So, I tried to install it in openser-1.1.0. But, When I tried, I got the > error message. > This is the error message that I have got. I do hope anybody can give me > a suggestion to solve this problem. Please... > > The error message is : > [Sat Sep 09 13:02:56 2006] [notice] mod_python: Creating 4 session > mutexes based on 256 max processes and 0 max threads. > [Sat Sep 09 13:02:56 2006] [notice] Apache/2.2.0 (Fedora) configured -- > resuming normal operations > [Sat Sep 09 13:03:10 2006] [error] [client 202.95.149.251] PHP Warning: > require_once(DB.php) [ > href='function.require-once'>function.require-once]: failed to open > stream: No such file or directory in > /var/www/serweb-0.9.4/html/main_prepend.php on line 38 > [Sat Sep 09 13:03:10 2006] [error] [client 202.95.149.251] PHP Fatal > error: require_once() [function.require]: > Failed opening required 'DB.php' (include_path='.:/usr/share/pear') in > /var/www/serweb-0.9.4/html/main_prepend.php on line 38 > [root@sip httpd]# > > I have tried to analyze the error. But, I can not understand what > happen. Maybe because my lack skill in php programming. > I do hope anybody can help me..Please... > > > Thanks > Regards, > > > Ferianto > > Note : > 1. I am using Fedora Core 5 > 2. The php and mysql packet are : > > > php-pdo-5.1.2-5 > php-soap-5.1.2-5 > php-bcmath-5.1.2-5 > php-ncurses-5.1.2-5 > php-gd-5.1.2-5 > php-mbstring-5.1.2-5 > php-xmlrpc-5.1.2-5 > php-ldap-5.1.2-5 > php-mysql-5.1.2-5 > php-devel-5.1.2-5 > php-imap-5.1.2-5 > php-pgsql-5.1.2-5 > php-xml-5.1.2-5 > php-5.1.2-5 > php-pear-1.4.6-2 > php-dba-5.1.2-5 > php-odbc-5.1.2-5 > php-snmp-5.1.2-5 > > libdbi-dbd-mysql-0.8.1a-1.2.1 > mysql-5.0.18-2.1 > mysql-server-5.0.18-2.1 > mod_auth_mysql-3.0.0-3 > php-mysql-5.1.2-5 > mysql-connector-odbc-3.51.12-1.2.1 > mysql-devel-5.0.18-2.1 > > > > ------------------------------------------------------------------------ > Yahoo! Messenger with Voice. Make PC-to-Phone Calls > > to the US (and 30+ countries) for 2ï¿½/min or less. > > > ------------------------------------------------------------------------ > > _______________________________________________ > Serweb-users mailing list > Serweb-users(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serweb-users --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

1 0

[Serusers] MS LCS 2005 / SER / Asterisk Integration
by harrygaillac-sip＠yahoo.fr 11 Sep '06

11 Sep '06

Hi to all, I read http://www.voip-info.org/wiki/view/MS+LCS+2005+%252F+SER+%252F+Asterisk+Int… Is it possible to use ser as a presence server instead of LCS 2005 ? Harry ___________________________________________________________________________ Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. http://fr.answers.yahoo.com

1 0

[Users] 'To' header field and redirect
by Michel Zenone 11 Sep '06

11 Sep '06

Hi! My sip phone has troubles to understand which sip address to contact when it receives a redirection from my openser: In fact 'To' header field contains the new uri and the last one... So now I try to remove the last one from the field but I don't know how to do this! Can somebody help me? Thank you! Michel

2 8

[Serusers] About the accounting problem
by AR. 11 Sep '06

11 Sep '06

Dear All I don't know that is anyone have the same problem. The sipua calls to the pstn user through the cisco voice gateway, then if the pstn user ends the session, the radius log will not to log the acct_stop_time until the sipua handup could anyone help Best Regards AR.

1 0

[Serusers] No vm.so in my SER modules.
by Meidiana Ten 11 Sep '06

11 Sep '06

Good afternoon guys...I'd like to ask you some questions based on my project in building SIP server.. I need to activate msilo so that it could store offline messages from clients. Is it common that in my SER modules that i have installed has no module named vm.so?? The following configuration is my ser.cfg. Please tell me what i have to add to activate msilo module: ---------------------------------------------------------------------------------------------------------------------------- debug=3 fork=yes log_stderror=yes listen=202.95.149.2 # put your server IP address here port=5060 children=8 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" fifo_mode=0666 loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/permissions.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" modparam("auth_db|permissions|uri_db|usrloc","db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") alias='pcr.ac.id' route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); break; }; if (uri==myself) { if (method=="ACK") { route(6); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("pcr.ac.id","subscriber")) { www_challenge("pcr.ac.id","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- if (nat_uac_test("19")) { setflag(6); } #if (!allow_trusted() && nat_uac_test("19")) { # setflag(6); #} lookup("aliases"); if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("pcr.ac.id","subscriber")) { proxy_challenge("pcr.ac.id","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; if (uri=~"^sip:9[0-9]*@") { route(4); break; }; if (uri!=myself) { route(5); route(1); break; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { route(4); break; }; sl_send_reply("404", "User Not Found"); break; }; if (method=="CANCEL") { route(1); break; } if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; t_on_reply("1"); if (!t_relay()) { if(isflagset(6)) { unforce_rtp_proxy(); } sl_reply_error(); }; } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehostport("202.95.149.254:5060"); # INSERT YOUR PSTN GATEWAY IP ADDRESS avp_write("i:45", "inv_timeout"); #if (!allow_trusted() && isflagset(6)) { if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; route(1); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:\ +0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } -------------------------------------------------------------- Then, i'd like to know why when i run my server, it comes with warning about RTP Proxy? What do i need to setup a right RTP Proxy? Thanx for the attention. --------------------------------- Stay in the know. Pulse on the new Yahoo.com. Check it out.

1 0

[Serusers] Re: [Serweb-users] how to add users via serweb
by Andrey Kouprianov 10 Sep '06

10 Sep '06

Not create accounts per se. Ask for an account.. And sometimes it doesnt work.. Anyway, there a "register" link on the login page for users. Start from there. On 9/9/06, G.Jacobsen <g_jacobsen(a)yahoo.co.uk> wrote: > > Users can create their own accounts - not the admin. > > Cheers > > Gerry > > > ----- Original Message ----- > *From:* Ranjeet Kumar <ranjeetk(a)aztecsoft.com> > *To:* serweb-users(a)lists.iptel.org > *Sent:* Saturday, September 09, 2006 2:56 PM > *Subject:* [Serweb-users] how to add users via serweb > > > > Hi, > > > > I can see user through serweb, but there is no option to create user via > serweb. > > Please help me > > > > Thanks, > > Ranjeet > > > > The information contained in, or attached to, this e-mail, contains > confidential information and is intended solely for the use of the > individual or entity to whom they are addressed and is subject to legal > privilege. If you have received this e-mail in error you should notify the > sender immediately by reply e-mail, delete the message from your system and > notify your system manager. Please do not copy it for any purpose, or > disclose its contents to any other person. The views or opinions presented > in this e-mail are solely those of the author and do not necessarily > represent those of the company. The recipient should check this e-mail and > any attachments for the presence of viruses. The company accepts no > liability for any damage caused, directly or indirectly, by any virus > transmitted in this email. > > www.aztecsoft.com > > ------------------------------ > > _______________________________________________ > Serweb-users mailing list > Serweb-users(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serweb-users > > > _______________________________________________ > Serweb-users mailing list > Serweb-users(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serweb-users > > >

1 0

[Users] Can serweb-0.9.4 run in openser? Please help....
by Ferianto siregar 10 Sep '06

10 Sep '06

Dear all, Thanks to every body in this forum for help me.. Thank you. All, now I try to build serweb-0.9.4 in openser-1.1.0-tls. I have ever got a message from this forum that the serweb-0.9.4 can work sucessfully in openser-1.1.0. So, I tried to install it in openser-1.1.0. But, When I tried, I got the error message. This is the error message that I have got. I do hope anybody can give me a suggestion to solve this problem. Please... The error message is : [Sat Sep 09 13:02:56 2006] [notice] mod_python: Creating 4 session mutexes based on 256 max processes and 0 max threads. [Sat Sep 09 13:02:56 2006] [notice] Apache/2.2.0 (Fedora) configured -- resuming normal operations [Sat Sep 09 13:03:10 2006] [error] [client 202.95.149.251] PHP Warning: require_once(DB.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /var/www/serweb-0.9.4/html/main_prepend.php on line 38 [Sat Sep 09 13:03:10 2006] [error] [client 202.95.149.251] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'DB.php' (include_path='.:/usr/share/pear') in /var/www/serweb-0.9.4/html/main_prepend.php on line 38 [root@sip httpd]# I have tried to analyze the error. But, I can not understand what happen. Maybe because my lack skill in php programming. I do hope anybody can help me..Please... Thanks Regards, Ferianto Note : 1. I am using Fedora Core 5 2. The php and mysql packet are : php-pdo-5.1.2-5 php-soap-5.1.2-5 php-bcmath-5.1.2-5 php-ncurses-5.1.2-5 php-gd-5.1.2-5 php-mbstring-5.1.2-5 php-xmlrpc-5.1.2-5 php-ldap-5.1.2-5 php-mysql-5.1.2-5 php-devel-5.1.2-5 php-imap-5.1.2-5 php-pgsql-5.1.2-5 php-xml-5.1.2-5 php-5.1.2-5 php-pear-1.4.6-2 php-dba-5.1.2-5 php-odbc-5.1.2-5 php-snmp-5.1.2-5 libdbi-dbd-mysql-0.8.1a-1.2.1 mysql-5.0.18-2.1 mysql-server-5.0.18-2.1 mod_auth_mysql-3.0.0-3 php-mysql-5.1.2-5 mysql-connector-odbc-3.51.12-1.2.1 mysql-devel-5.0.18-2.1 --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.

2 2

[Serusers] no sound
by jorain 09 Sep '06

09 Sep '06

Hi all, I have 2 UA, one is fixed IP and another is dynamic IP, when i call from PSTN to fixed IP, it running well(audio on both side). But when call from either PSTN or fixed IP phone to dynamic IP phone, there is no sound on both sides. And when i call from fixed IP phone to dynamic IP phone, there is no sound on dynamic IP phone. What could be the problems? Thanks, Best Regards, jorain

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users