- sr-users - kamailio.org

[Users] no authorize with ATA and phones
by Jens Carl 26 May '06

26 May '06

Hello list, i have following code in my openser configuration to prevent that everybody can make calls to PSTN: process INVITE messages -- snip if( !allow_trusted() ) { if( !proxy_authorize( "myrealm", "subscriber" ) ) { proxy_challenge( "realm", "1" ); return; } else if ( !check_from() ) { sl_send_reply( "403", "Use From=ID" ); return; }; consume_credentials(); }; -- snap This works fine with snom200, snom360 and some other phones/ATA. It isn't working with Linksys IPPhone SPA941, snom100 and the ATA Linksys SPA 2001. All these three devices aren't sending the credentials after they are challenge to send them. I know this because the new INVITE message have no digest information in it, the call isn't be placed and the following error message from the logs of OpenSER: /sbin/openser[3323]: find_credentials(): Error while parsing headers I have also tried that the second parameter of proxy_challenge are 0 (zero) but that didn't helped. Have anybody a clue where I can change this behaviour of the three devices? Have I change some settings, etc of the phones/ATA? Or maybe I have to change my code for the OpenSER? But I will avoid this because I don't want to be an open relay. Thanks in advance Jens

2 1

[Serusers] Registering users
by ravi reddy 26 May '06

26 May '06

hi all this is for one soft phone is doing like this ,,, i cannot register to my SER server U 81.21.34.34:212 -> 81.21.33.35:5060 REGISTER sip:81.21.33.35 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.135:5060 ;rport;branch=z9hG4bK0DA1C9E2C22F46F5805CA80FA91EA5 67..From: 32331002 <sip:32331002@81.21.33.35>;tag=3696527705..To: 32331002 <sip:32331002@81.21.33.35>..Contact: "3233100 2" <sip:32331002@192.168.0.135:5060>..Call-ID: 7256439978B84537903A09F726B93509@81.21.33.35..CSeq: 55065 REGISTER..Expir es: 1800..Max-Forwards: 70..User-Agent: X-Lite release 1105x..Content-Length: 0.... # U 81.21.33.35:5060 -> 81.21.34.34:212 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 192.168.0.135:5060 ;rport=212;branch=z9hG4bK0DA1C9E2C22F46F5805CA80FA91EA567;receive d=81.21.34.34..From: 32331002 <sip:32331002@81.21.33.35>;tag=3696527705..To: 32331002 <sip:32331002@81.21.33.35>..Call-I D: 7256439978B84537903A09F726B93509@81.21.33.35..CSeq: 55065 REGISTER..Server: Sip EXpress router (0.9.6 (i386/linux)).. Content-Length: 0..Warning: 392 81.21.33.35:5060 "Noisy feedback tells: pid=3630 req_src_ip=81.21.34.34 req_src_port=21 2 in_uri=sip:81.21.33.35 out_uri=sip:81.21.33.35 via_cnt==1".... # U 81.21.33.35:5060 -> 81.21.34.34:212 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 192.168.0.135:5060 ;rport=212;branch=z9hG4bK0DA1C9E2C22F46F5805CA80FA91EA567;r eceived=81.21.34.34..From: 32331002 <sip:32331002@81.21.33.35>;tag=3696527705..To: 32331002 <sip:32331002@81.21.33.35>;t ag=74961b5b71b6ddce908b9155b956083f.043b..Call-ID: 7256439978B84537903A09F726B93509@81.21.33.35..CSeq: 55065 REGISTER..W WW-Authenticate: Digest realm="81.21.33.35", nonce="4476df0f829037115d339a515fbb4cd42dc01881"..Server: Sip EXpress route r (0.9.6 (i386/linux))..Content-Length: 0..Warning: 392 81.21.33.35:5060"Noisy feedback tells: pid=3630 req_src_ip=81. 21.34.34 req_src_port=212 in_uri=sip:81.21.33.35 out_uri=sip:81.21.33.35via_cnt==1".... # And this for another soft phone which i register U 81.21.34.34:5060 -> 81.21.33.35:5060 REGISTER sip:81.21.33.35 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.76;branch=z9hG4bKbc56000086c00000..From: "ravi" <sip:323310 01(a)81.21.33.35>;tag=c33700001dbcffff..To: <sip:32331001@81.21.33.35>..Contact: <sip:32331001@192.168.0.76>..Authorizatio n: Digest username="32331001", realm="81.21.33.35", algorithm=MD5, uri="sip:81.21.33.35", nonce="4476e07f5709732e89167b7 e64ed8ffb36b9626a", response="b2bf125d721aa70e7813d65f6a5da879"..Call-ID: 943300002fe50000@192.168.0.76..CSeq: 101 REGIS TER..Expires: 360000..User-Agent: Grandstream HT496 1.0.2.16..Max-Forwards: 70..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFE R,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... # U 81.21.33.35:5060 -> 81.21.34.34:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 192.168.0.76 ;branch=z9hG4bKbc56000086c00000;received=81.21.34.34..From: "ravi" <sip :32331001@81.21.33.35>;tag=c33700001dbcffff..To: <sip:32331001@81.21.33.35>..Call-ID: 943300002fe50000@192.168.0.76..CSe q: 101 REGISTER..Server: Sip EXpress router (0.9.6(i386/linux))..Content-Length: 0..Warning: 392 81.21.33.35:5060 "Nois y feedback tells: pid=3630 req_src_ip=81.21.34.34 req_src_port=5060 in_uri=sip:81.21.33.35 out_uri=sip:81.21.33.35 via_ cnt==1".... # U 81.21.33.35:5060 -> 81.21.34.34:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 192.168.0.76 ;branch=z9hG4bKbc56000086c00000;rport=5060;received=81.21.34.34..From: "rav i" <sip:32331001@81.21.33.35>;tag=c33700001dbcffff..To: < sip:32331001@81.21.33.35>;tag=74961b5b71b6ddce908b9155b956083f. 740d..Call-ID: 943300002fe50000@192.168.0.76..CSeq: 101 REGISTER..Contact: <sip:32331001@192.168.0.76>;expires=360000;re ceived="sip:81.21.34.34:5060"..Server: Sip EXpress router (0.9.6(i386/linux))..Content-Length: 0..Warning: 392 81.21.33 .35:5060 "Noisy feedback tells: pid=3630 req_src_ip=81.21.34.34req_src_port=5060 in_uri=sip: 81.21.33.35 out_uri=sip:81 .21.33.35 via_cnt==1".... # U 81.21.34.34:5060 -> 81.21.33.35:5060 SUBSCRIBE sip:32331001@81.21.33.35 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.76;branch=z9hG4bKc94cffff37bbffff..From: "ravi" < sip:32331001@81.21.33.35>;tag=0c61000042370000..To: < sip:32331001@81.21.33.35>..Contact: <sip:32331001@192.168.0.76>..Ca ll-ID: 01a5000043e20000@192.168.0.76..CSeq: 58060 SUBSCRIBE..User-Agent: Grandstream HT496 1.0.2.16..Max-Forwards: 70..A llow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Event: message-summary..Expires: 360000..Accept: applic ation/simple-message-summary..Content-Length: 0.... # U 81.21.33.35:5060 -> 81.21.34.34:5060 SUBSCRIBE sip:32331001@192.168.0.76 SIP/2.0..Record-Route: <sip: 81.21.33.35;ftag=0c61000042370000;lr=on>..Via: SIP/2.0/U DP 81.21.33.35;branch=z9hG4bKb62c.88852837.0..Via: SIP/2.0/UDP 192.168.0.76;received=81.21.34.34;branch=z9hG4bKc94cffff3 7bbffff..From: "ravi" <sip:32331001@81.21.33.35>;tag=0c61000042370000..To: <sip:32331001@81.21.33.35>..Contact: <sip:323 31001(a)192.168.0.76>..Call-ID: 01a5000043e20000@192.168.0.76..CSeq: 58060 SUBSCRIBE..User-Agent: Grandstream HT496 1.0.2. 16..Max-Forwards: 16..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Event: message-summary..Expires: 360000..Accept: application/simple-message-summary..Content-Length: 0.... # U 81.21.34.34:5060 -> 81.21.33.35:5060 SIP/2.0 202 Accepted..Via: SIP/2.0/UDP 81.21.33.35;branch= z9hG4bKb62c.88852837.0..Via: SIP/2.0/UDP 192.168.0.76;received =81.21.34.34;branch=z9hG4bKc94cffff37bbffff..Record-Route: <sip: 81.21.33.35;ftag=0c61000042370000;lr=on>..From: "ravi" < sip:32331001@81.21.33.35>;tag=0c61000042370000..To: < sip:32331001@81.21.33.35>;tag=58b60000e93cffff..Call-ID: 01a5000043 e20000@192.168.0.76..CSeq: 58060 SUBSCRIBE..User-Agent: Grandstream HT496 1.0.2.16..Contact: <sip:32331001@192.168.0.76> ..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Supported: replaces..Content-Length: 0.... # U 81.21.33.35:5060 -> 81.21.34.34:5060 SIP/2.0 202 Accepted..Via: SIP/2.0/UDP 192.168.0.76;received=81.21.34.34;branch=z9hG4bKc94cffff37bbffff..Record-Route: < sip:81.21.33.35;ftag=0c61000042370000;lr=on>..From: "ravi" < sip:32331001@81.21.33.35>;tag=0c61000042370000..To: <sip:323 31001(a)81.21.33.35>;tag=58b60000e93cffff..Call-ID: 01a5000043e20000@192.168.0.76..CSeq: 58060 SUBSCRIBE..User-Agent: Gran dstream HT496 1.0.2.16..Contact: <sip:32331001@81.21.34.34:5060>..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO ,SUBSCRIBE..Supported: replaces..Content-Length: 0.... i did the same in both cases but what happend to that one is registering and another is not registering please help me how to cross this registering users problem :-( Thanks in advance regards Ravi.

1 0

[Users] rtpproxy issue
by krishnamurthy kandi 26 May '06

26 May '06

Hi, I am getting the problem with rtp proxy in the case of call forking from ser. After forking, one callee sends 183 session progress (early media),with this rtpsession is established in rtp proxy. Then other callee accept the call, starts sending media, in this case after calling recvfrom function ,raddr structure is not containing exact destination and port, it containts previous packet IP ,current packet port at comparing session IP and remote IPs, once IP is updated, canupdate flag is disabled, then for further invalid IP comparisons , it wont update the remote IP. Thats why rtp is not getting relayed to user agents. Why raddr variable is not containing correct IP and port, why it is showing corrupted information. For my convention I am not checking canupdate flag, now it is disabled, then it is working now.Any suggitions. Thanks, kkmurthy --------------------------------- New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.

2 1

[Users] Multi UAC authorisations with AVPops or other method - any working example ?
by G.Jacobsen 26 May '06

26 May '06

Gentlemen, I would be most grateful, if someone could provide an example on how to use the new AVPops funktions (cvs head) to accompish multiple UAC registrations with authorisations uac_auth(); with external SIP providers. Any shortcut on how to accomplish this (avoiding AVPops) or related examples would also be greatly appreciated. TIA for your help. Gerry

2 1

[Users] uac_redirect and branches
by Andreas Granig 26 May '06

26 May '06

Hi, I'm currently playing around with uac_redirect to also handle UAC-triggered call forwards (301/302). My server-side CF-handling works in that way that I rewrite the R-URI in failure-routes and call my normal routes to manipulate the new R-URI and then append_branch() before t_relay(). Now with get_redirects() the new R-URIs are already appended as branches, so how may I manipulate the URIs then? Is there a way to get the R-URI of a branch back into the "normal" R-URI where I can use $rU and $rd and so on? Or how may I handle that then? Setting a branch-route and t_relay() and then manipulate my URI doesn't seem to be the way to go, because there's quite a lot of R-URI processing going on in my config before an INVITE leaves the server. Thanks, Andy

2 1

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 26 May '06

26 May '06

Actually I have tried and found TABLE_VERSION in the sources but I don't know what it should be. I have both old sources and the new sources in 2 different directories. How can I check the difference between 2 usrloc modules ? Using diff ? Regards, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Friday, May 26, 2006 12:51 PM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)iptel.org Subject: Re: PA error sending notifies You have to look for DB_VERSION or something similar in usrloc module and check wether this value corresponds to the one appearing in the version table corresponding to the usrloc module. If they are different, you have to modify the version table to match the usrloc requirements...as Vaclav said maybe somebody forget to update it in the module or in the database.. Great news about the NOTIFY!!!! Let's see if I can ceck it in the coming weeks.... samuel. 2006/5/26, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi, > > Thanks for your reply; but I've already tried dropping and creating > with the mysql scripts that are supplied. > Unfortunately they are not creating suitable database version for usrloc. > Have you tried using usrloc with db support ? > > Btw, with the latest CVS sources presence is working fine. I have no > problem with sending notifications. > I just have the problem with usrloc db support now. And thus I need > the db structure for new CVS version. > > Thanks, > ilker > > -----Original Message----- > From: samuel [mailto:samu60@gmail.com] > Sent: Friday, May 26, 2006 12:17 PM > To: İlker Aktuna (Koç.net) > Cc: Vaclav Kubart; serusers(a)iptel.org > Subject: Re: PA error sending notifies > > The HEAD CVS version has a completely different database structure > than the stable version. You have to drop the older version and use > the new one. Next is a SIMPLIFICATION of a possible way to drop the > old structure and create the new one: > > The simple way to do it is with the script ser_mysql.sh, which uses > my_create.sql and my_drop.sql so be sure you've got the three scripts > in /usr/local/sbin. When you type form the shell: > > #ser_mysql.sh > > you'll see which are the possible options, being the most relevant > drop and create > > typing > > #ser_mysql.sh drop > > and later > > #ser_mysql.sh create > > > You'll have in the local machine the SER database. > > > Hope it helps, > > Samuel > > 2006/5/26, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > Hi vaclav, > > > > How can I get help for the usrloc db problem ? > > I don't know the necessary db structure for usrloc. Does it need a > > table named usrloc ? > > Please point me to the correct address for help on the db structure. > > > > Btw, I'm downloading the new cvs sources now and I'll try it. I hope > > the sending notifies problem is solved for my case too. > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Friday, May 26, 2006 8:18 AM > > To: İlker Aktuna (Koç.net) > > Cc: serusers(a)iptel.org; samuel > > Subject: Re: PA error sending notifies > > > > It was something forgotten in modules/tm/ut.h, now it is corrected on CVS. > > > > I have no such DB error, but I'm not using usrloc/registrar with DB. > > May be that somebody increments the version number in code and > > forgot increment the table version number in DB initialization or > > something like that. > > > > Vaclav > > > > On Thu, May 25, 2006 at 04:35:26PM +0300, ?lker Aktuna (Koç.net) wrote: > > > Great :) > > > That's good nes for me, because I couldn't make you believe that > > > there was a serious problem :) Now how shall we proceed ? > > > > > > Btw, you'll also have the following error in latest CVS, can you check ? > > > > > > May 25 16:44:57 sesapp /root/ser/sbin/ser[3173]: register_udomain(): > > > Invalid table version (use ser_mysql.sh reinstall) May 25 16:44:57 > > > sesapp /root/ser/sbin/ser[3173]: register_udomain(): Invalid table > > > version (use ser_mysql.sh reinstall) > > > > > > Regards, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > Sent: Thursday, May 25, 2006 4:26 PM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)iptel.org; samuel > > > Subject: Re: PA error sending notifies > > > > > > I updated to latest CVS sources and I have the same problem now! > > > [Can't send watcherinfo notification (-7)] > > > > > > Vaclav > > > > > > On Wed, May 24, 2006 at 10:45:42AM +0300, ?lker Aktuna (Koç.net) wrote: > > > > Hi Vaclav, > > > > > > > > I want to install and run Ser on an identical linux setup with > > > > you to overcome the notification sending issue (thus presence) > > > > That's why I > > need the library versions that you use. > > > > Also I need to know which version of Debian Sarge you are using. > > > > And your ser snapshot version. > > > > > > > > Can you supply me these information please ? > > > > > > > > Thanks, > > > > ilker > > > > > > > > > > > > ________________________________ > > > > > > > > From: ?lker Aktuna (Koç.net) > > > > Sent: Tuesday, May 23, 2006 5:44 PM > > > > To: 'samuel' > > > > Cc: Vaclav Kubart; serusers(a)iptel.org > > > > Subject: RE: PA error sending notifies > > > > > > > > > > > > > > > > So you are not able to use presence but other traffic (IM, voice > > > > etc.) > > is fine ? > > > > Do you know the xml parser library that your system has installed ? > > > > Vaclav, which library version do you use ? > > > > > > > > Thanks, > > > > ilker > > > > > > > > -----Original Message----- > > > > From: samuel [mailto:samu60@gmail.com] > > > > Sent: Tuesday, May 23, 2006 5:05 PM > > > > To: ?lker Aktuna (Koç.net) > > > > Cc: Vaclav Kubart; serusers(a)iptel.org > > > > Subject: Re: PA error sending notifies > > > > > > > > Unfortunately I had no more time to look into it, so I have no > > > > more > > progress..I just saw that the contact header was not properly parsed > > and there were problems when selecting the local socket where to > > send the notifies from...I hope in the following weeks I find some > > more time to spend on it. > > > > > > > > Samuel. > > > > > > > > > > > > 2006/5/23, ?lker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > > > > > > > > > > > > > > > > Hi Samuel, > > > > > > > > > > Did you solve the issue where sending notifies would fail with > > > > > error code -7 ? > > > > > > > > > > "Can't send watcherinfo notification (-7)" > > > > > > > > > > If you solved it can you tell me how ? > > > > > > > > > > I believe the problem is occuring while creating the headers. > > > > > Because in "notify.c" I see that -7 is returned only while > > > > > creating > > headers. > > > > > > > > > > Regards, > > > > > ilker > > > > > > > > > > > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/00090307/01044D0C/02024800/431…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 26 May '06

26 May '06

Hi, Thanks for your reply; but I've already tried dropping and creating with the mysql scripts that are supplied. Unfortunately they are not creating suitable database version for usrloc. Have you tried using usrloc with db support ? Btw, with the latest CVS sources presence is working fine. I have no problem with sending notifications. I just have the problem with usrloc db support now. And thus I need the db structure for new CVS version. Thanks, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Friday, May 26, 2006 12:17 PM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)iptel.org Subject: Re: PA error sending notifies The HEAD CVS version has a completely different database structure than the stable version. You have to drop the older version and use the new one. Next is a SIMPLIFICATION of a possible way to drop the old structure and create the new one: The simple way to do it is with the script ser_mysql.sh, which uses my_create.sql and my_drop.sql so be sure you've got the three scripts in /usr/local/sbin. When you type form the shell: #ser_mysql.sh you'll see which are the possible options, being the most relevant drop and create typing #ser_mysql.sh drop and later #ser_mysql.sh create You'll have in the local machine the SER database. Hope it helps, Samuel 2006/5/26, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi vaclav, > > How can I get help for the usrloc db problem ? > I don't know the necessary db structure for usrloc. Does it need a > table named usrloc ? > Please point me to the correct address for help on the db structure. > > Btw, I'm downloading the new cvs sources now and I'll try it. I hope > the sending notifies problem is solved for my case too. > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Friday, May 26, 2006 8:18 AM > To: İlker Aktuna (Koç.net) > Cc: serusers(a)iptel.org; samuel > Subject: Re: PA error sending notifies > > It was something forgotten in modules/tm/ut.h, now it is corrected on CVS. > > I have no such DB error, but I'm not using usrloc/registrar with DB. > May be that somebody increments the version number in code and forgot > increment the table version number in DB initialization or something > like that. > > Vaclav > > On Thu, May 25, 2006 at 04:35:26PM +0300, ?lker Aktuna (Koç.net) wrote: > > Great :) > > That's good nes for me, because I couldn't make you believe that > > there was a serious problem :) Now how shall we proceed ? > > > > Btw, you'll also have the following error in latest CVS, can you check ? > > > > May 25 16:44:57 sesapp /root/ser/sbin/ser[3173]: register_udomain(): > > Invalid table version (use ser_mysql.sh reinstall) May 25 16:44:57 > > sesapp /root/ser/sbin/ser[3173]: register_udomain(): Invalid table > > version (use ser_mysql.sh reinstall) > > > > Regards, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Thursday, May 25, 2006 4:26 PM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)iptel.org; samuel > > Subject: Re: PA error sending notifies > > > > I updated to latest CVS sources and I have the same problem now! > > [Can't send watcherinfo notification (-7)] > > > > Vaclav > > > > On Wed, May 24, 2006 at 10:45:42AM +0300, ?lker Aktuna (Koç.net) wrote: > > > Hi Vaclav, > > > > > > I want to install and run Ser on an identical linux setup with you > > > to overcome the notification sending issue (thus presence) That's > > > why I > need the library versions that you use. > > > Also I need to know which version of Debian Sarge you are using. > > > And your ser snapshot version. > > > > > > Can you supply me these information please ? > > > > > > Thanks, > > > ilker > > > > > > > > > ________________________________ > > > > > > From: ?lker Aktuna (Koç.net) > > > Sent: Tuesday, May 23, 2006 5:44 PM > > > To: 'samuel' > > > Cc: Vaclav Kubart; serusers(a)iptel.org > > > Subject: RE: PA error sending notifies > > > > > > > > > > > > So you are not able to use presence but other traffic (IM, voice > > > etc.) > is fine ? > > > Do you know the xml parser library that your system has installed ? > > > Vaclav, which library version do you use ? > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: samuel [mailto:samu60@gmail.com] > > > Sent: Tuesday, May 23, 2006 5:05 PM > > > To: ?lker Aktuna (Koç.net) > > > Cc: Vaclav Kubart; serusers(a)iptel.org > > > Subject: Re: PA error sending notifies > > > > > > Unfortunately I had no more time to look into it, so I have no > > > more > progress..I just saw that the contact header was not properly parsed > and there were problems when selecting the local socket where to send > the notifies from...I hope in the following weeks I find some more > time to spend on it. > > > > > > Samuel. > > > > > > > > > 2006/5/23, ?lker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > > > > > > > > > > > Hi Samuel, > > > > > > > > Did you solve the issue where sending notifies would fail with > > > > error code -7 ? > > > > > > > > "Can't send watcherinfo notification (-7)" > > > > > > > > If you solved it can you tell me how ? > > > > > > > > I believe the problem is occuring while creating the headers. > > > > Because in "notify.c" I see that -7 is returned only while > > > > creating > headers. > > > > > > > > Regards, > > > > ilker > > > > > > > > > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/010C0605/07044406/0B044D > > 02/12410218.jpg> > > > ______________________________________________________________________ > > > ______________________________________________________________________ > > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, > > icerigini > hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda > lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum > kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir > sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. > Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile > kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve > meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or > > entity to > whom it is addressed , and may contain confidential information. If > you are not the intended recipient of this message or you receive this > mail in error, you should refrain from making any use of the contents > and from opening any attachment. In that case, please notify the > sender immediately and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the > presence of computer viruses. In doing so, however, sender cannot > warrant that virus or other forms of data corruption may not be > present and do not take any responsibility in any occurrence. > > > ______________________________________________________________________ > > > ______________________________________________________________________ > > _ > > > > > > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, > icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. > Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz > ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic > bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or > entity to whom it is addressed , and may contain confidential > information. If you are not the intended recipient of this message or > you receive this mail in error, you should refrain from making any use > of the contents and from opening any attachment. In that case, please > notify the sender immediately and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the > presence of computer viruses. In doing so, however, sender cannot > warrant that virus or other forms of data corruption may not be > present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > <http://387555.sigclick.mailinfo.com/sigclick/030B0504/07064D0A/01014E03/203…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] serweb option in openser_mysql.sh ?
by G.Jacobsen 26 May '06

26 May '06

Hello I see that someone has created a new option in openser_mysql.sh called serweb in the cvs head version. The purpose seems to be to create separate datatables for serweb. However I cant get this option to work - the script always prompts be the command syntax. Unfortunately my shell scripting capabilities are substandard so I cannot gather from the code which parameters are expected. Can anyone enlighten me what the correct syntax is and whether the new table are supposed to created in the openser database or a separate database ? I got serweb to work with openser 1.0.1 however I need the new UAC AVP related functions so I need the new openser version - and dont want to break serweb. TIA Gerry

5 7

[Users] Route Algorithm.
by raviprakash sunkara 26 May '06

26 May '06

Hi listers and Users. Please help me in " how to make a call from one place to other place in route algorithm " I got Call not approved ? what is this and also $04 and $08 messages as not found and request timeout........ It connect ( REgister) to server . server respond as 1 st " 200 ok " and then " 408 request time out.... plesse help me Bye.. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Users] How to extract sip-id when using alias-id?
by Frogger 26 May '06

26 May '06

I am using alias_db to store alias's for users. However when an alias is dialed I need to also be able to restore the alias owners original sip-id. This is necessary to forward the call to voicemail using sip-id. Any guidance on getting the sip-id out of the alias_db and replacing the alias-id prior to forwarding to vmail? Thanks in advance! F __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 3

[Serusers] Two PSTN gateway providers needs different prefix
by Ryan Pagquil 26 May '06

26 May '06

Hi SER users, I have a problem. We have two PSTN gateway providers and both of them needs different prefixes when sending request to their gateway. For example: GW1 ---> 3333#<phone number> GW2 ---> 4444#<phone number> Now I'll be using these two provider with LCR, but I don't know how will I accomplish their requirements on their prefixes. Could you give me any idea about this scenario? Also how can I make LCR to failover with these gateways? Please help.... Thanks in advance, Ryan Pagquil

3 3

[Users] choosing transport according to message size
by JF 26 May '06

26 May '06

Hi all, Is there any function in openser that selects the transport protocol (TCP or UDP) according to the message size? E.g. if the message going out is bigger than MTU, use TCP... or does the script writer have to take this into account every time a relaying function is called? Also, in this second case, is the actual outgoing message size available in the script (i.e. after lumps are applied)? Thanks in advance, JF

2 8

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 26 May '06

26 May '06

Hi vaclav, How can I get help for the usrloc db problem ? I don't know the necessary db structure for usrloc. Does it need a table named usrloc ? Please point me to the correct address for help on the db structure. Btw, I'm downloading the new cvs sources now and I'll try it. I hope the sending notifies problem is solved for my case too. Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Friday, May 26, 2006 8:18 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)iptel.org; samuel Subject: Re: PA error sending notifies It was something forgotten in modules/tm/ut.h, now it is corrected on CVS. I have no such DB error, but I'm not using usrloc/registrar with DB. May be that somebody increments the version number in code and forgot increment the table version number in DB initialization or something like that. Vaclav On Thu, May 25, 2006 at 04:35:26PM +0300, ?lker Aktuna (Koç.net) wrote: > Great :) > That's good nes for me, because I couldn't make you believe that there > was a serious problem :) Now how shall we proceed ? > > Btw, you'll also have the following error in latest CVS, can you check ? > > May 25 16:44:57 sesapp /root/ser/sbin/ser[3173]: register_udomain(): > Invalid table version (use ser_mysql.sh reinstall) May 25 16:44:57 > sesapp /root/ser/sbin/ser[3173]: register_udomain(): Invalid table > version (use ser_mysql.sh reinstall) > > Regards, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, May 25, 2006 4:26 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)iptel.org; samuel > Subject: Re: PA error sending notifies > > I updated to latest CVS sources and I have the same problem now! > [Can't send watcherinfo notification (-7)] > > Vaclav > > On Wed, May 24, 2006 at 10:45:42AM +0300, ?lker Aktuna (Koç.net) wrote: > > Hi Vaclav, > > > > I want to install and run Ser on an identical linux setup with you > > to overcome the notification sending issue (thus presence) That's why I need the library versions that you use. > > Also I need to know which version of Debian Sarge you are using. > > And your ser snapshot version. > > > > Can you supply me these information please ? > > > > Thanks, > > ilker > > > > > > ________________________________ > > > > From: ?lker Aktuna (Koç.net) > > Sent: Tuesday, May 23, 2006 5:44 PM > > To: 'samuel' > > Cc: Vaclav Kubart; serusers(a)iptel.org > > Subject: RE: PA error sending notifies > > > > > > > > So you are not able to use presence but other traffic (IM, voice etc.) is fine ? > > Do you know the xml parser library that your system has installed ? > > Vaclav, which library version do you use ? > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: samuel [mailto:samu60@gmail.com] > > Sent: Tuesday, May 23, 2006 5:05 PM > > To: ?lker Aktuna (Koç.net) > > Cc: Vaclav Kubart; serusers(a)iptel.org > > Subject: Re: PA error sending notifies > > > > Unfortunately I had no more time to look into it, so I have no more progress..I just saw that the contact header was not properly parsed and there were problems when selecting the local socket where to send the notifies from...I hope in the following weeks I find some more time to spend on it. > > > > Samuel. > > > > > > 2006/5/23, ?lker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > > > > > > Hi Samuel, > > > > > > Did you solve the issue where sending notifies would fail with > > > error code -7 ? > > > > > > "Can't send watcherinfo notification (-7)" > > > > > > If you solved it can you tell me how ? > > > > > > I believe the problem is occuring while creating the headers. > > > Because in "notify.c" I see that -7 is returned only while creating headers. > > > > > > Regards, > > > ilker > > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/010C0605/07044406/0B044D > 02/12410218.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ <http://387555.sigclick.mailinfo.com/sigclick/0A090601/05014D01/09094D06/991…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Users] 2 Openser Instances
by Sam Lee 26 May '06

26 May '06

Hi Klaus, Thanks for the quick reply. My purpose is one of the instance being a normal Openser, the other with a FORCE RTPproxy. This is so that if they have a symmetric NAT going on in their network, they can make use of this rtpproxy as an outbound proxy but still able to call those register with the normal openser. Care to explain what is cacheless userloc mode ? How do I set it ? Because of the normal and force RTPproxy , these 2 instances has different routing patterns, and they are handled differently. Any ideas ? Regards, Sam -----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Friday, May 26, 2006 4:28 PM To: Sam Lee Cc: users(a)openser.org Subject: Re: [Users] 2 Openser Instances 1. You can run several instances of openser on the same PC, but what is your purpose? 2. If 2 openser proxies share the same userloc database, you have to use the cacheless userloc mode 3. If you just want to listen on several ports, use a single proxy with multiple listen directives listen=udp:1.2.3.4:5060 listen=udp:1.2.3.4:6060 listen=udp:1.2.3.4:7060 regards klaus Sam Lee wrote: > Have anyone tried running 2 separate instances on OpenSER (running on > different ports) ? > Both these instances are doing almost exactly the same thing, they > take in REGISTER and save them into the locations database. They all > do all the other processing like INVITE. > > Will this causes a problem in MYSQL ? I'm asking this because i got a > very strange problem. I register 1 UA to each instances. When i did a > ul show , it always only have either the UA from instance A or UA from > instance B . Note, these 2 UA have different numbers. Why can't it > just save both into the MYSQL DB ? > > I would be glad to clarify any doubts. Please assist as far as you can. > Thanks! > > Regards, > Sam > > > ---------------------------------------------------------------------- > -- > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

2 1

[Users] 2 Openser Instances
by Sam Lee 26 May '06

26 May '06

Have anyone tried running 2 separate instances on OpenSER (running on different ports) ? Both these instances are doing almost exactly the same thing, they take in REGISTER and save them into the locations database. They all do all the other processing like INVITE. Will this causes a problem in MYSQL ? I'm asking this because i got a very strange problem. I register 1 UA to each instances. When i did a ul show , it always only have either the UA from instance A or UA from instance B . Note, these 2 UA have different numbers. Why can't it just save both into the MYSQL DB ? I would be glad to clarify any doubts. Please assist as far as you can. Thanks! Regards, Sam

2 1

[Serusers] Serusers request
by rekik refka 26 May '06

26 May '06

hello, I must make some changes in ser modules and recompile it. But I have no idea to do that. I think to make some change in pa modules. I'm trying to send an email for one client to be notified for a new state of presence of some contacts or receiving mail when one of this contacts become on line. Can I modify other modules. I trying this with ser 0.8.12.tar.gz Can you help me, I'm debutant with this platform thanks in advance.

2 1

[Serusers] PA - NOTIFY
by Mário Ferreira 26 May '06

26 May '06

Hi, I am using pa module and sipsak and eyebeam for sending SUBSCRIBE method. The Ser responds with 200 ok, but the NOTIFY is not sent. There is a problem with the socket: 0(9487) DEBUG:tm:t_uac: next_hop=<sip:joel@10.112.64.214:10194> 0(9487) t_uac: no socket found This code is in the tm module, uac.c file, t_uac function. The error is in tm module, or is the pa module that bad uses the tm function and causes this error? regards, Mário Ferreira

2 1

[Serusers] how to use presence module?
by Henry Jacob 26 May '06

26 May '06

Please forgive my ignorance because I'm new to SER. I want to know if I need to have a external presence server if PA module is compiled into SER. I need to use Presence, but I want to put Presence server/Presence agent into one Linux box. thanks, Henry

2 3

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 26 May '06

26 May '06

Great :) That's good nes for me, because I couldn't make you believe that there was a serious problem :) Now how shall we proceed ? Btw, you'll also have the following error in latest CVS, can you check ? May 25 16:44:57 sesapp /root/ser/sbin/ser[3173]: register_udomain(): Invalid table version (use ser_mysql.sh reinstall) May 25 16:44:57 sesapp /root/ser/sbin/ser[3173]: register_udomain(): Invalid table version (use ser_mysql.sh reinstall) Regards, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, May 25, 2006 4:26 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)iptel.org; samuel Subject: Re: PA error sending notifies I updated to latest CVS sources and I have the same problem now! [Can't send watcherinfo notification (-7)] Vaclav On Wed, May 24, 2006 at 10:45:42AM +0300, ?lker Aktuna (Koç.net) wrote: > Hi Vaclav, > > I want to install and run Ser on an identical linux setup with you to > overcome the notification sending issue (thus presence) That's why I need the library versions that you use. > Also I need to know which version of Debian Sarge you are using. > And your ser snapshot version. > > Can you supply me these information please ? > > Thanks, > ilker > > > ________________________________ > > From: ?lker Aktuna (Koç.net) > Sent: Tuesday, May 23, 2006 5:44 PM > To: 'samuel' > Cc: Vaclav Kubart; serusers(a)iptel.org > Subject: RE: PA error sending notifies > > > > So you are not able to use presence but other traffic (IM, voice etc.) is fine ? > Do you know the xml parser library that your system has installed ? > Vaclav, which library version do you use ? > > Thanks, > ilker > > -----Original Message----- > From: samuel [mailto:samu60@gmail.com] > Sent: Tuesday, May 23, 2006 5:05 PM > To: ?lker Aktuna (Koç.net) > Cc: Vaclav Kubart; serusers(a)iptel.org > Subject: Re: PA error sending notifies > > Unfortunately I had no more time to look into it, so I have no more progress..I just saw that the contact header was not properly parsed and there were problems when selecting the local socket where to send the notifies from...I hope in the following weeks I find some more time to spend on it. > > Samuel. > > > 2006/5/23, ?lker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > Hi Samuel, > > > > Did you solve the issue where sending notifies would fail with error > > code -7 ? > > > > "Can't send watcherinfo notification (-7)" > > > > If you solved it can you tell me how ? > > > > I believe the problem is occuring while creating the headers. > > Because in "notify.c" I see that -7 is returned only while creating headers. > > > > Regards, > > ilker > > <http://387555.sigclick.mailinfo.com/sigclick/010C0605/07044406/0B044D02/124…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

Re: [Serusers] upload script in presence snapshot
by Vaclav Kubart 26 May '06

26 May '06

Look into presence handbook. You have to set LD_LIBRARY_PATH to the path, where are lib_ser_cds.so and others. Vaclav On Thu, May 25, 2006 at 12:08:31PM -0300, Gustavo Moreira wrote: > Ok, that work fine. Thank you. > But now when I'm trying to run ser, I've got a parse problem, do I have to > add an extra package or lib? (I've checked that modules are in > /usr/local/lib/ser/modules/) > Here you have the log: > > > > norris:/# ser > 0(1705) ERROR: load_module: could not open module > </usr/local/lib/ser/modules/dialog.so>: lib_ser_cds.so: cannot open shared > object file: No such file or directory > 0(1705) parse error (36,13-14): failed to load module > 0(1705) ERROR: load_module: could not open module > </usr/local/lib/ser/modules/rls.so>: lib_ser_xcap.so: cannot open shared > object file: No such file or directory > 0(1705) parse error (37,13-14): failed to load module > 0(1705) ERROR: load_module: could not open module > </usr/local/lib/ser/modules/pa.so>: lib_ser_xcap.so: cannot open shared > object file: No such file or directory > 0(1705) parse error (38,13-14): failed to load module > 0(1705) ERROR: load_module: could not open module > </usr/local/lib/ser/modules/presence_b2b.so>: lib_ser_xcap.so: cannot open > shared object file: No such file or directory > 0(1705) parse error (39,13-14): failed to load module > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (76,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (77,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (78,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (79,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (80,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (81,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (82,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <rls> found > 0(1705) parse error (83,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (85,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (87,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (89,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (91,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (92,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (94,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (95,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (97,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (99,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (101,19-20): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (103,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (105,21-22): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <pa> found > 0(1705) parse error (107,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (110,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (112,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (114,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (116,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (118,20-21): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (120,22-23): Can't set module parameter > 0(1705) set_mod_param_regex: No module matching <presence_b2b> found > 0(1705) parse error (122,19-20): Can't set module parameter > 0(1705) parse error (190,32-33): unknown command, missing loadmodule? > > 0(1705) parse error (195,32-33): unknown command, missing loadmodule? > > 0(1705) parse error (201,30-31): unknown command, missing loadmodule? > > 0(1705) parse error (204,24-25): unknown command, missing loadmodule? > > 0(1705) parse error (218,35-36): unknown command, missing loadmodule? > > 0(1705) parse error (222,36-37): unknown command, missing loadmodule? > > 0(1705) parse error (230,26-27): unknown command, missing loadmodule? > > 0(1705) parse error (233,31-32): unknown command, missing loadmodule? > > 0(1705) parse error (246,32-33): unknown command, missing loadmodule? > > 0(1705) parse error (260,36-37): unknown command, missing loadmodule? > > 0(1705) parse error (261,28-29): unknown command, missing loadmodule? > > 0(1705) parse error (282,21-22): unknown command, missing loadmodule? > > 0(1705) parse error (286,24-25): unknown command, missing loadmodule? > > 0(1705) parse error (304,24-25): unknown command, missing loadmodule? > > 0(1705) parse error (312,28-29): unknown command, missing loadmodule? > > ERROR: bad config file (47 errors) > > > > -----Mensaje original----- > De: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Enviado el: jueves, 25 de mayo de 2006 2:48 > Para: Gustavo Moreira > CC: serusers(a)iptel.org > Asunto: Re: [Serusers] upload script in presence snapshot > > Run "make" in the directory src/upload or you can call a C compiler > (like gcc) directly to the source file. > Vaclav > > On Wed, May 24, 2006 at 11:19:39PM -0300, Gustavo Moreira wrote: > > In the README document included with the presence snapshot (xcap/README) > > says that a script must be created from C source in src/upload. I've got > the > > source but I don't know how to create the script :-P > > > > Could someone help me? > > > > Thanks, > > > > Gustavo. > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SER + Asterisk
by Edgar Barbosa 25 May '06

25 May '06

Hi all, I'm trying to deploy a scenario where I have an openser as a sip proxy (taking care of registrations) in front of an asterisk (to handle pstn call routing/billing/etc). Both openser and asterisk authenticate users on the same database, and I'm able to register a UA on both. The problem is when I try to relay calls from openser to asterisk. I always get the following error: SIP/2.0 407 Proxy Authentication Required What am I missing here? My openser.cfg is the following: debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes listen=192.168.64.102 sip_warning=no #advertised_address=192.168.1.102 reply_to_via=no check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/nathelper.so" loadmodule "/usr/lib/openser/modules/textops.so" loadmodule "/usr/lib/openser/modules/xlog.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" # -- usrloc params -- # Flush every 60 sec modparam("usrloc", "db_mode", 0) # -- auth params -- modparam("auth_db", "db_url", "XXX") modparam("auth_db", "user_column", "accountcode") #modparam("auth_db", "domain_column", "accountcode") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "secret") # -- replication auth param -- modparam("auth", "secret", "mysecret") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); return; }; force_rport(); fix_nated_contact(); if(uri == myself) { if(method == "REGISTER") { # Make sure they are a valid user on our proxy if(!www_authorize("", "astaccount")) { xlog("L_INFO", "Req Auth For %ct, URI = %ru\n"); www_challenge("", "1"); return; }; xlog("L_INFO", "Registered Contact %ct, URI = %ru\n"); save("location"); return; }; }; record_route(); # ------------------------------------------------------------------ # loose-route processing if(loose_route()) { xlog("L_INFO", "loose_route(): Looking up %rm URI %ru from %is\n"); lookup("location"); xlog("L_INFO", "loose_route(): t_relay() %rm to URI %ru\n"); t_relay(); return; }; if(method == "INVITE") { # Assume it came from one of our VoIP phones, all routing is done by Asterisk xlog("L_INFO", "%rm came from a VoIP phone (%is), attempting to authorize %fu\n"); # Make sure they are a valid user on our proxy if (!www_authorize("", "astaccount")) { www_challenge("", "0"); xlog("L_INFO", "Failed to authorize %fu (%is)\n"); return; }; # Found a match, this is going to a VoIP phone xlog("L_INFO", "Auth OK, sending URI %ru to Asterisk for routing\n"); rewritehostport("192.168.64.103:5060"); xlog("L_INFO", "INVITE New URI = %ru, t_relay()ing now\n"); t_relay(); # forward(uri:host, uri:port); return; }; # ------------------------------------------------------------------ # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP lookup("location"); xlog("L_INFO", "Default t_relay() (method = %rm, URI = %ru, >From = %is)\n"); if(!t_relay()) { xlog("L_INFO", "Failed sending requesting %rm URI (%ru)\n"); sl_reply_error(); }; } Thanks for your help

2 1

[Serusers] Buffer overflow?
by sip 25 May '06

25 May '06

I recently started seeing this in the logs right after a registration attempt from a user who's a on our system, but is somehow storing contact info for a different username on a different service: May 25 12:03:52 death ser[22235]: ERROR: warning_builder: buffer size exceeded May 25 12:03:52 death ser[22235]: WARNING: warning skipped -- too big The register packet that caused it was: REGISTER sip:proxy.ideasip.com:5060;g_id=17476253781;g_dom=proxy01.sipphone.com SIP/2.0. Record-Route: <sip:198.65.XXX.XXX;ftag=31839881;lr>. Via: SIP/2.0/UDP 198.65.XXX.XXX;branch=z9hG4bK1033.75ea1c43.0. Via: SIP/2.0/UDP 192.168.1.18:36560;received=69.91.XXX.XXX;branch=z9hG4bK-d87543-5e7fc69802da2376-1--d87543-;rport=33028. Max-Forwards: 69. Contact: <sip:1747625XXXX@proxy01.sipphone.com:5060>. To: <sip:1101201XXXX@proxy.ideasip.com:5060;g_id=1747625XXXX;g_dom=proxy01.sipphone.com>. From: <sip:1101201XXXX@proxy.ideasip.com:5060;g_id=1747625XXXX;g_dom=proxy01.sipphone.com>;tag=31839881. Call-ID: 7dffe5df6f2a521a@YW50ZXJvb21lbWFjLmxvY2Fs. CSeq: 40 REGISTER. Expires: 1800. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, INFO, NOTIFY, MESSAGE. Supported: ICE. User-Agent: MacGizmo (Gizmo-s2n1)/1.5. Authorization: Digest username="1101201XXXX",realm="proxy.ideasip.com",nonce="4475d66395235de62215f7d44f9dbafc068050f7",uri="sip:proxy.ideasip.com:5060;g_id=1747625XXXX;g_dom=proxy01.sipphone.com",response="2a56661c46fdac2129de3100014e5753",cnonce="aab804aa999687b7",nc=00000003,qop=auth,algorithm=MD5. Content-Length: 0. P-hint: outbound. Any idea what's throwing the error and what causes it? N.

3 4

[Users] 404 not found and 408 request time out.
by raviprakash sunkara 25 May '06

25 May '06

Hi... please help me...... what i need to do This is log log message occurred in softphone END TIME: 5733597 SEND >> 24.98.157.209:5060 REGISTER sip:24.98.157.209 SIP/2.0 v: SIP/2.0/UDP 192.168.2.10:5060 ;rport;branch=z9hG4bK1F1709A8059643318C41CAEA3A92556F f: test <sip:test1@24.98.157.209>;tag=2726274778 t: test <sip:test1@24.98.157.209> m: "test" <sip:test1@192.168.2.10:5060> i: CD5177EE93424854AC1EFCBB8377C934(a)24.98.157.209 CSeq: 33483 REGISTER Expires: 1800 Authorization: Digest username="test1",realm="24.98.157.209 ",nonce="447537969c8cd77b390784061802d25fb1172536",response="494295ffe8019017d090458fe5bd4355",uri="sip: 24.98.157.209" Max-Forwards: 70 User-Agent: X-Lite release 1105x l: 0 RECEIVE TIME: 5734005 RECEIVE << 24.98.157.209:5060 SIP/2.0 200 OK v: SIP/2.0/UDP 192.168.2.10:5060 ;rport=5060;branch=z9hG4bK1F1709A8059643318C41CAEA3A92556F;received= 61.17.248.68 f: test <sip:test1@24.98.157.209>;tag=2726274778 t: test <sip:test1@24.98.157.209>;tag=390c3671353535dcaf504ab6b64ba770.4a87 i: CD5177EE93424854AC1EFCBB8377C934(a)24.98.157.209 CSeq: 33483 REGISTER Contact: <sip:test1@192.168.2.10:5060>;expires=1800 Server: OpenSer (1.0.1-notls (i386/linux)) Content-Length: 0 Warning: 392 192.168.2.101:5060 "Noisy feedback tells: pid=8426 req_src_ip= 61.17.248.68 req_src_port=5060 in_uri=sip:24.98.157.209 out_uri=sip: 24.98.157.209 via_cnt==1" SEND TIME: 5744995 SEND >> 24.98.157.209:5060 INVITE sip:test2@24.98.157.209 SIP/2.0 v: SIP/2.0/UDP 192.168.2.10:5060 ;rport;branch=z9hG4bK94B0A7B9F494421C98C5F0AE70FF77B5 f: test <sip:test1@24.98.157.209>;tag=3426314233 t: <sip:test2@24.98.157.209> m: <sip:test1@192.168.2.10:5060> i: 06861D8C-44D7-44E3-862B-2804B53FF5A0(a)192.168.2.10 CSeq: 40000 INVITE Max-Forwards: 70 c: application/sdp User-Agent: X-Lite release 1105x l: 304 v=0 o=test1 5744982 5744995 IN IP4 192.168.2.10 s=X-Lite c=IN IP4 192.168.2.10 t=0 0 m=audio 8000 RTP/AVP 0 8 3 98 97 101 a=rtpmap:0 pcmu/8000 a=rtpmap:8 pcma/8000 a=rtpmap:3 gsm/8000 a=rtpmap:98 iLBC/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv RECEIVE TIME: 5745404 RECEIVE << 24.98.157.209:5060 SIP/2.0 100 trying -- your call is important to us v: SIP/2.0/UDP 192.168.2.10:5060 ;rport=5060;branch=z9hG4bK94B0A7B9F494421C98C5F0AE70FF77B5;received= 61.17.248.68 f: test <sip:test1@24.98.157.209>;tag=3426314233 t: <sip:test2@24.98.157.209> i: 06861D8C-44D7-44E3-862B-2804B53FF5A0(a)192.168.2.10 CSeq: 40000 INVITE Server: OpenSer (1.0.1-notls (i386/linux)) Content-Length: 0 Warning: 392 192.168.2.101:5060 "Noisy feedback tells: pid=8426 req_src_ip= 61.17.248.68 req_src_port=5060 in_uri=sip:test2@24.98.157.209 out_uri= sip:test2@192.168.2.8:5060 via_cnt==1" RECEIVE TIME: 5745421 RECEIVE << 24.98.157.209:5060 SIP/2.0 404 Not Found v: SIP/2.0/UDP 192.168.2.10:5060;received=61.17.248.68 ;rport=5060;branch=z9hG4bK94B0A7B9F494421C98C5F0AE70FF77B5 f: test <sip:test1@24.98.157.209>;tag=3426314233 t: <sip:test2@24.98.157.209>;tag=3318687206 i: 06861D8C-44D7-44E3-862B-2804B53FF5A0(a)192.168.2.10 CSeq: 40000 INVITE Server: Cisco ATA 188 v3.2.1 atasip (050616A) Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, PRACK, UPDATE Content-Length: 0 SEND TIME: 5745423 SEND >> 24.98.157.209:5060 ACK sip:test2@24.98.157.209 SIP/2.0 v: SIP/2.0/UDP 192.168.2.10:5060 ;rport;branch=z9hG4bK94B0A7B9F494421C98C5F0AE70FF77B5 f: test <sip:test1@24.98.157.209>;tag=3426314233 t: <sip:test2@24.98.157.209>;tag=3318687206 m: <sip:test1@192.168.2.10:5060> i: 06861D8C-44D7-44E3-862B-2804B53FF5A0(a)192.168.2.10 CSeq: 40000 ACK Max-Forwards: 70 l: 0 -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

2 1

[Users] 408 and 404 messages
by raviprakash sunkara 25 May '06

25 May '06

Hi Everybody... I'm using openser 1.0.1 and Xlite softphone.. It finely registered and initialized the nathelper moudule just giving the nat_interval and ping_nated_flag parameters. When i tried to makes call I found ..." 404 not found" and 408 Request timeout " messages arrived to me.. I think so problem in NAT only... help me in this please , its very important to me.... Bye -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Serusers] hello
by rekik refka 25 May '06

25 May '06

hello, I must make some change to ser code and recompile it. So, I'm searching to make some changes to pa module. i'm trying then to send an email to one client to be notified of presence of some contacts. I'm trying with ser_08.12.tar.gz can I think in other persistant changes or continue with my idea. In bith case what can I do that. I'm debutant on Ser. Can you help me. thanks in advance. Refka On 5/25/06, serusers-request(a)lists.iptel.org <serusers-request(a)lists.iptel.org> wrote: > Send Serusers mailing list submissions to > serusers(a)lists.iptel.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.iptel.org/mailman/listinfo/serusers > or, via email, send a message with subject or body 'help' to > serusers-request(a)lists.iptel.org > > You can reach the person managing the list at > serusers-owner(a)lists.iptel.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Serusers digest..." > > > Today's Topics: > > 1. Re: Mediaproxy gets confused (rusl) > 2. Re: Hell Sir please help in SER (Andrey Kouprianov) > 3. How to enable Authentication (Aniruddha Vaidya) > 4. Re: How to enable Authentication (Andrey Kouprianov) > 5. Re: How to enable Authentication (Andrey Kouprianov) > 6. Re: How to enable Authentication (Andrey Kouprianov) > 7. Re: How to enable Authentication (Andrey Kouprianov) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 25 May 2006 08:14:41 +0000 > From: rusl <rusl(a)jpfortune.org> > Subject: Re: [Serusers] Mediaproxy gets confused > To: serusers(a)lists.iptel.org > Message-ID: <200605250814.41731.rusl(a)jpfortune.org> > Content-Type: text/plain; charset="iso-8859-1" > > > Hi, just to let everyone know, I found the problem.. In mediaproxy 1.4.2, > they > added a new "feature" which allows the called user to change his media > stream > with a 183, 200 status w/ SDP. But the thing is that usually it's the caller > that initiates a mediachange, so when the caller sent a 200 or 183 for media > change, mediaproxy thought it was the called that had a media change, and > basically connected the caller to itself by saying that the caller was the > called. > > I fixed it by "reversing" the functionality in mediaproxy. > > On Wednesday 24. May 2006 22:04, rusl wrote: > > Hi, I was wondering whether anyone has seen this strange error before. It > > happens intermittently, where mediaproxy gets confused as to who the > > "called" IP is, it thinks the caller is the called and switches back and > > forth. > > > > Any ideas? > > > > rusl.. > > > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) > > May 24 21:58:08 voice mediaproxy[15520]: session > > 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from > > 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > ------------------------------ > > Message: 2 > Date: Thu, 25 May 2006 16:22:01 +0700 > From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com> > Subject: [Serusers] Re: Hell Sir please help in SER > To: serusers(a)iptel.org > Message-ID: > <ab5f5bda0605250222wc43a773ifb9103de26a1b6d5(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi, > > proxyIP takes only one IP address. You cannot say > > proxyIP = 81.21.33.35,127.0.0.1 > > Instead try > > proxyIP = 81.21.33.35 > > Then mail me if you have problem. Your ser.cfg seems like the one from > getting started document. It should work just fine. > > > ------------------------------ > > Message: 3 > Date: Thu, 25 May 2006 16:03:33 +0530 > From: "Aniruddha Vaidya" <anir123(a)gmail.com> > Subject: [Serusers] How to enable Authentication > To: Serusers(a)lists.iptel.org > Message-ID: > <7759a74d0605250333x5ae6196ekc780dc3d8d7ff064(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hello All, > I'm trying to enable the authentication feature in SER. But its not accepted > by the server. > This is my ser.cfg file. > > Can you tell me whats wrong ? > > # > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > # Uncomment these lines to enter debugging mode > #fork=no > #log_stderror=yes > # > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > loadmodule "/usr/local/lib/ser/modules/textops.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > #loadmodule "/usr/local/lib/ser/modules/auth.so" > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this config), > # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > break; > }; > > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("<InternalSER>", "subscriber")) { > www_challenge("<InternalSER>", "0"); > break; > }; > > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > append_hf("P-hint: usrloc applied\r\n"); > route(1); > } > > route[1] > { > # send it out now; use stateful forwarding as it works reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > } > > > Thanks, > Aniruddha >

1 0

[Serusers] hello
by rekik refka 25 May '06

25 May '06

Hello, I must make some change to ser code and recompile it. So, I'm searching to make some changes to pa module. i'm trying then to send an email to one client to be notified of presence of some contacts. I'm trying with ser_08.12.tar.gz can I think in other persistant changes or continue with my idea. In bith case what can I do that. I'm debutant on Ser. Can you help me. thanks in advance. Refka

1 0

[Serusers] Re: Hell Sir please help in SER
by Andrey Kouprianov 25 May '06

25 May '06

Hi, Please, just call me Andrey. So, you are using X-lite. Try setting Send Internal IP to "Always". Your contact header fields must contain the NATed IP addressed (that's what that setting will do), but now they are your proxy's. I think, I had this kind of problem before... On 5/25/06, ravi reddy <mravikreddy(a)gmail.com> wrote: > Hello Mr.Andrey Kouprianov > > I made some changes in my mediaproxy and it starts with no errors > in that even i saw in log messages it is perfetly say mediaproxy server is > on and socked is /var/run/mediaproxy.sock > > > and i registerd three users and even now when iam calling there is no > sound in both ways at first i get succsess for only one call and i saw in > sessions.py every thing is o.k but after one hour again i tried but i dont > know what is happening here > > here are some messages i found in ngrep port 5060 > > > 213.149.178.204:5060 -> 81.21.33.35:5060 > SIP/2.0 200 Ok..Via: SIP/2.0/UDP > 81.21.33.35;branch=z9hG4bK471b.a07c0605.0..Via: SIP/2.0/UDP > 81.21.34.34:5060;rport=5060 > ;branch=z9hG4bKC2A7F34D7D1D49139D47222CE36B2163..From: > 32331000 <sip:32331000@81.21.33.35>;tag=630051386..To: <sip:32331 > 002(a)81.21.33.35>;tag=1982025997..Contact: > <sip:32331002@213.149.178.204:5060>..Call-ID: > 9602F577-35D2-4596-BB54-5A28F865 > 6802@192.168.0.77..CSeq: 24309 BYE..Server: X-Lite release > 1105x..Content-Length: 0.... > # > U 81.21.33.35:5060 -> 81.21.34.34:5060 > SIP/2.0 200 Ok..Via: SIP/2.0/UDP > 81.21.34.34:5060;rport=5060;branch=z9hG4bKC2A7F34D7D1D49139D47222CE36B2163..From: > 32331 > 000 <sip:32331000@81.21.33.35>;tag=630051386..To: > <sip:32331002@81.21.33.35>;tag=1982025997..Contact: <sip:32331002@213. > 149.178.204:5060>..Call-ID: > 9602F577-35D2-4596-BB54-5A28F8656802@192.168.0.77..CSeq: > 24309 BYE..Server: X-Lite release 1 > 105x..Content-Length: 0.... > # > U 81.21.34.34:5060 -> 81.21.33.35:5060 > > the phone is connecting fine and when connects i dont hear any sounds > > > Sir, i need your help and iam very desperate to make this sucessfull global > calls i hope you will solve my problem thanks > > kindly regards > Ravi. > > > >

1 0

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 25 May '06

25 May '06

Hi Vaclav, I want to install and run Ser on an identical linux setup with you to overcome the notification sending issue (thus presence) That's why I need the library versions that you use. Also I need to know which version of Debian Sarge you are using. And your ser snapshot version. Can you supply me these information please ? Thanks, ilker ________________________________ From: İlker Aktuna (Koç.net) Sent: Tuesday, May 23, 2006 5:44 PM To: 'samuel' Cc: Vaclav Kubart; serusers(a)iptel.org Subject: RE: PA error sending notifies So you are not able to use presence but other traffic (IM, voice etc.) is fine ? Do you know the xml parser library that your system has installed ? Vaclav, which library version do you use ? Thanks, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Tuesday, May 23, 2006 5:05 PM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)iptel.org Subject: Re: PA error sending notifies Unfortunately I had no more time to look into it, so I have no more progress..I just saw that the contact header was not properly parsed and there were problems when selecting the local socket where to send the notifies from...I hope in the following weeks I find some more time to spend on it. Samuel. 2006/5/23, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi Samuel, > > Did you solve the issue where sending notifies would fail with error > code -7 ? > > "Can't send watcherinfo notification (-7)" > > If you solved it can you tell me how ? > > I believe the problem is occuring while creating the headers. Because > in "notify.c" I see that -7 is returned only while creating headers. > > Regards, > ilker > <http://387555.sigclick.mailinfo.com/sigclick/010C0504/0C074F07/040D4E03/024…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 2

Re: [Serusers] How to enable Authentication
by Andrey Kouprianov 25 May '06

25 May '06

You may find one in attachment. You'll have to substitute some stuff there (IP's and domain/realm values). I also suggest you to read getting started document from www.onsip.org On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > Hey Andrey, > Can you send me working Ser configuration file ? > > > On 5/25/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com > wrote: > > Btw, which ser are you using? > > > > You should uncomment these lines too > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > #fork=yes > > #log_stderror=no # (cmd line: -E) > > > > Then change things like this "if (!uri==myself)" into this "if > (uri!=myself)" > > > > > > On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > > > Nope. > > > It just says > > > > > > "Starting ser: > > > [ OK ]" > > > > > > BUt if try to get the status of the server > > > > > > "ser dead but subsys locked" > > > > > > Message is displayed! > > > > > > > > > > > > On 5/25/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com > wrote: > > > > what does "ser -c" say? > > > > > > > > On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > > > > > I did the same > > > > > But Now when I start with new configuration > > > > > I get > > > > > Starting SER : PID file /var/run/ser.pid does not exist -- SER start > > > failed > > > > > Error. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 5/25/06, Andrey Kouprianov < andrey.kouprianov(a)gmail.com> wrote: > > > > > > Read > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > # mysql.so must be loaded ! > > > > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > > > > #loadmodule > "/usr/local/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 5/25/06, Aniruddha Vaidya < anir123(a)gmail.com > wrote: > > > > > > > Hello All, > > > > > > > I'm trying to enable the authentication feature in SER. But its > not > > > > > accepted > > > > > > > by the server. > > > > > > > This is my ser.cfg file. > > > > > > > > > > > > > > Can you tell me whats wrong ? > > > > > > > > > > > > > > # > > > > > > > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > > > > > > > # > > > > > > > # simple quick-start config script > > > > > > > # > > > > > > > > > > > > > > # ----------- global configuration parameters > > > ------------------------ > > > > > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > > > #fork=yes > > > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > > > > > # Uncomment these lines to enter debugging mode > > > > > > > #fork=no > > > > > > > #log_stderror=yes > > > > > > > # > > > > > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > > > dns=no # (cmd. line: -r) > > > > > > > rev_dns=no # (cmd. line: -R) > > > > > > > port=5060 > > > > > > > children=4 > > > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > > > > > > # ------------------ module loading > > > > > > > ---------------------------------- > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > loadmodule > "/usr/local/lib/ser/modules/mysql.so" > > > > > > > > > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > > > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > > > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > > > > > loadmodule > "/usr/local/lib/ser/modules/maxfwd.so" > > > > > > > loadmodule > "/usr/local/lib/ser/modules/usrloc.so" > > > > > > > loadmodule > > > "/usr/local/lib/ser/modules/registrar.so" > > > > > > > loadmodule > "/usr/local/lib/ser/modules/textops.so" > > > > > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > > > # mysql.so must be loaded ! > > > > > > > #loadmodule > "/usr/local/lib/ser/modules/auth.so" > > > > > > > #loadmodule > "/usr/local/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > # ----------------- setting module-specific parameters > > > --------------- > > > > > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > > > # for persistent storage and comment the previous line > > > > > > > modparam("usrloc", "db_mode", 2) > > > > > > > > > > > > > > # -- auth params -- > > > > > > > # Uncomment if you are using auth module > > > > > > > # > > > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > > > # > > > > > > > # If you set "calculate_ha1" parameter to yes (which true in > this > > > > > config), > > > > > > > # uncomment also the following parameter) > > > > > > > # > > > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > > > > > # -- rr params -- > > > > > > > # add value to ;lr param to make some broken UAs happy > > > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > > > > > # ------------------------- request routing > logic > > > > > ------------------- > > > > > > > > > > > > > > # main routing logic > > > > > > > > > > > > > > route{ > > > > > > > > > > > > > > # initial sanity checks -- messages with > > > > > > > # max_forwards==0, or excessively long requests > > > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > > > sl_send_reply("483","Too Many Hops"); > > > > > > > break; > > > > > > > }; > > > > > > > if (msg:len >= 2048 ) { > > > > > > > sl_send_reply("513", "Message too big"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > > > # subsequent messages will go through our proxy; that's > > > > > > > # particularly good if upstream and downstream entities > > > > > > > # use different transport protocol > > > > > > > if (!method=="REGISTER") record_route(); > > > > > > > > > > > > > > # subsequent messages withing a dialog should take the > > > > > > > # path determined by record-routing > > > > > > > if (loose_route()) { > > > > > > > # mark routing logic in request > > > > > > > append_hf("P-hint: rr-enforced\r\n"); > > > > > > > route(1); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > if (!uri==myself) { > > > > > > > # mark routing logic in request > > > > > > > append_hf("P-hint: outbound\r\n"); > > > > > > > route(1); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > > > # (in case, it does not work, use the following command > > > > > > > # with proper names and addresses in it) > > > > > > > if (uri==myself) { > > > > > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > > > if (!www_authorize("<InternalSER>", > > > > > > > "subscriber")) { > > > > > > > www_challenge("<InternalSER>", "0"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > save("location"); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > lookup("aliases"); > > > > > > > if (!uri==myself) { > > > > > > > append_hf("P-hint: outbound alias\r\n"); > > > > > > > route(1); > > > > > > > break; > > > > > > > }; > > > > > > > > > > > > > > # native SIP destinations are handled using our USRLOC > DB > > > > > > > if (!lookup("location")) { > > > > > > > sl_send_reply("404", "Not Found"); > > > > > > > break; > > > > > > > }; > > > > > > > }; > > > > > > > append_hf("P-hint: usrloc applied\r\n"); > > > > > > > route(1); > > > > > > > } > > > > > > > > > > > > > > route[1] > > > > > > > { > > > > > > > # send it out now; use stateful forwarding as it works > reliably > > > > > > > # even for UDP2TCP > > > > > > > if (!t_relay()) { > > > > > > > sl_reply_error(); > > > > > > > }; > > > > > > > } > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > Aniruddha > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Serusers mailing list > > > > > > > Serusers(a)lists.iptel.org > > > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > > > > Serusers(a)lists.iptel.org > > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > Serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

1 0

Re: [Serusers] How to enable Authentication
by Andrey Kouprianov 25 May '06

25 May '06

Btw, which ser are you using? You should uncomment these lines too #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) Then change things like this "if (!uri==myself)" into this "if (uri!=myself)" On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > Nope. > It just says > > "Starting ser: > [ OK ]" > > BUt if try to get the status of the server > > "ser dead but subsys locked" > > Message is displayed! > > > > On 5/25/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > what does "ser -c" say? > > > > On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > > > I did the same > > > But Now when I start with new configuration > > > I get > > > Starting SER : PID file /var/run/ser.pid does not exist -- SER start > failed > > > Error. > > > > > > > > > > > > > > > > > > On 5/25/06, Andrey Kouprianov < andrey.kouprianov(a)gmail.com> wrote: > > > > Read > > > > > > > > # Uncomment this if you want digest authentication > > > > # mysql.so must be loaded ! > > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > > > > > > > > > > > > > > > > > On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com > wrote: > > > > > Hello All, > > > > > I'm trying to enable the authentication feature in SER. But its not > > > accepted > > > > > by the server. > > > > > This is my ser.cfg file. > > > > > > > > > > Can you tell me whats wrong ? > > > > > > > > > > # > > > > > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > > > > > # > > > > > # simple quick-start config script > > > > > # > > > > > > > > > > # ----------- global configuration parameters > ------------------------ > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > #fork=yes > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > # Uncomment these lines to enter debugging mode > > > > > #fork=no > > > > > #log_stderror=yes > > > > > # > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > dns=no # (cmd. line: -r) > > > > > rev_dns=no # (cmd. line: -R) > > > > > port=5060 > > > > > children=4 > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > > # ------------------ module loading > > > > > ---------------------------------- > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > > > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > > > > loadmodule > "/usr/local/lib/ser/modules/registrar.so" > > > > > loadmodule "/usr/local/lib/ser/modules/textops.so" > > > > > > > > > > # Uncomment this if you want digest authentication > > > > > # mysql.so must be loaded ! > > > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > > > > > > > # ----------------- setting module-specific parameters > --------------- > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > # for persistent storage and comment the previous line > > > > > modparam("usrloc", "db_mode", 2) > > > > > > > > > > # -- auth params -- > > > > > # Uncomment if you are using auth module > > > > > # > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > # > > > > > # If you set "calculate_ha1" parameter to yes (which true in this > > > config), > > > > > # uncomment also the following parameter) > > > > > # > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > # -- rr params -- > > > > > # add value to ;lr param to make some broken UAs happy > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > # ------------------------- request routing logic > > > ------------------- > > > > > > > > > > # main routing logic > > > > > > > > > > route{ > > > > > > > > > > # initial sanity checks -- messages with > > > > > # max_forwards==0, or excessively long requests > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > sl_send_reply("483","Too Many Hops"); > > > > > break; > > > > > }; > > > > > if (msg:len >= 2048 ) { > > > > > sl_send_reply("513", "Message too big"); > > > > > break; > > > > > }; > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > # subsequent messages will go through our proxy; that's > > > > > # particularly good if upstream and downstream entities > > > > > # use different transport protocol > > > > > if (!method=="REGISTER") record_route(); > > > > > > > > > > # subsequent messages withing a dialog should take the > > > > > # path determined by record-routing > > > > > if (loose_route()) { > > > > > # mark routing logic in request > > > > > append_hf("P-hint: rr-enforced\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > if (!uri==myself) { > > > > > # mark routing logic in request > > > > > append_hf("P-hint: outbound\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > # (in case, it does not work, use the following command > > > > > # with proper names and addresses in it) > > > > > if (uri==myself) { > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > if (!www_authorize("<InternalSER>", > > > > > "subscriber")) { > > > > > www_challenge("<InternalSER>", "0"); > > > > > break; > > > > > }; > > > > > > > > > > save("location"); > > > > > break; > > > > > }; > > > > > > > > > > lookup("aliases"); > > > > > if (!uri==myself) { > > > > > append_hf("P-hint: outbound alias\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > # native SIP destinations are handled using our USRLOC DB > > > > > if (!lookup("location")) { > > > > > sl_send_reply("404", "Not Found"); > > > > > break; > > > > > }; > > > > > }; > > > > > append_hf("P-hint: usrloc applied\r\n"); > > > > > route(1); > > > > > } > > > > > > > > > > route[1] > > > > > { > > > > > # send it out now; use stateful forwarding as it works reliably > > > > > # even for UDP2TCP > > > > > if (!t_relay()) { > > > > > sl_reply_error(); > > > > > }; > > > > > } > > > > > > > > > > > > > > > Thanks, > > > > > Aniruddha > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > Serusers(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > Serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

1 0

Re: [Serusers] How to enable Authentication
by Andrey Kouprianov 25 May '06

25 May '06

what does "ser -c" say? On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > I did the same > But Now when I start with new configuration > I get > Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed > Error. > > > > > > On 5/25/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > Read > > > > # Uncomment this if you want digest authentication > > # mysql.so must be loaded ! > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > > > > > > > On 5/25/06, Aniruddha Vaidya <anir123(a)gmail.com> wrote: > > > Hello All, > > > I'm trying to enable the authentication feature in SER. But its not > accepted > > > by the server. > > > This is my ser.cfg file. > > > > > > Can you tell me whats wrong ? > > > > > > # > > > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > > > # > > > # simple quick-start config script > > > # > > > > > > # ----------- global configuration parameters ------------------------ > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > #fork=yes > > > #log_stderror=no # (cmd line: -E) > > > > > > # Uncomment these lines to enter debugging mode > > > #fork=no > > > #log_stderror=yes > > > # > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > > > > # ------------------ module loading > > > ---------------------------------- > > > > > > # Uncomment this if you want to use SQL database > > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > loadmodule "/usr/local/lib/ser/modules/textops.so" > > > > > > # Uncomment this if you want digest authentication > > > # mysql.so must be loaded ! > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > > > > # ----------------- setting module-specific parameters --------------- > > > > > > # -- usrloc params -- > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > # Uncomment this if you want to use SQL database > > > # for persistent storage and comment the previous line > > > modparam("usrloc", "db_mode", 2) > > > > > > # -- auth params -- > > > # Uncomment if you are using auth module > > > # > > > modparam("auth_db", "calculate_ha1", yes) > > > # > > > # If you set "calculate_ha1" parameter to yes (which true in this > config), > > > # uncomment also the following parameter) > > > # > > > modparam("auth_db", "password_column", "password") > > > > > > # -- rr params -- > > > # add value to ;lr param to make some broken UAs happy > > > modparam("rr", "enable_full_lr", 1) > > > > > > # ------------------------- request routing logic > ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if (msg:len >= 2048 ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > > > > # we record-route all messages -- to make sure that > > > # subsequent messages will go through our proxy; that's > > > # particularly good if upstream and downstream entities > > > # use different transport protocol > > > if (!method=="REGISTER") record_route(); > > > > > > # subsequent messages withing a dialog should take the > > > # path determined by record-routing > > > if (loose_route()) { > > > # mark routing logic in request > > > append_hf("P-hint: rr-enforced\r\n"); > > > route(1); > > > break; > > > }; > > > > > > if (!uri==myself) { > > > # mark routing logic in request > > > append_hf("P-hint: outbound\r\n"); > > > route(1); > > > break; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (uri==myself) { > > > > > > if (method=="REGISTER") { > > > > > > # Uncomment this if you want to use digest authentication > > > if (!www_authorize("<InternalSER>", > > > "subscriber")) { > > > www_challenge("<InternalSER>", "0"); > > > break; > > > }; > > > > > > save("location"); > > > break; > > > }; > > > > > > lookup("aliases"); > > > if (!uri==myself) { > > > append_hf("P-hint: outbound alias\r\n"); > > > route(1); > > > break; > > > }; > > > > > > # native SIP destinations are handled using our USRLOC DB > > > if (!lookup("location")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > }; > > > append_hf("P-hint: usrloc applied\r\n"); > > > route(1); > > > } > > > > > > route[1] > > > { > > > # send it out now; use stateful forwarding as it works reliably > > > # even for UDP2TCP > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > } > > > > > > > > > Thanks, > > > Aniruddha > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

1 1

[Serusers] How to enable Authentication
by Aniruddha Vaidya 25 May '06

25 May '06

Hello All, I'm trying to enable the authentication feature in SER. But its not accepted by the server. This is my ser.cfg file. Can you tell me whats wrong ? # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("<InternalSER>", "subscriber")) { www_challenge("<InternalSER>", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } Thanks, Aniruddha

2 1

[Serusers] Re: Hell Sir please help in SER
by Andrey Kouprianov 25 May '06

25 May '06

Hi, proxyIP takes only one IP address. You cannot say proxyIP = 81.21.33.35,127.0.0.1 Instead try proxyIP = 81.21.33.35 Then mail me if you have problem. Your ser.cfg seems like the one from getting started document. It should work just fine.

1 0

[Serusers] Mediaproxy gets confused
by rusl 25 May '06

25 May '06

Hi, I was wondering whether anyone has seen this strange error before. It happens intermittently, where mediaproxy gets confused as to who the "called" IP is, it thinks the caller is the called and switches back and forth. Any ideas? rusl.. May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 193.xxx.33.xxx:20820 (RTP) (will return to 193.xxx.33.xxx:20820) May 24 21:58:08 voice mediaproxy[15520]: session 7A99B4CF-725E-0952-8C5A-7C17443072C7(a)192.168.15.3: called signed in from 10.2.1.3:6622 (RTP) (will return to 10.2.1.3:6622)

1 1

RE: [Serusers] new table version
by İlker Aktuna (Koç.net) 25 May '06

25 May '06

Hi, Doesn't anyone else get the same problem when using the newest CVS version ? It requires a new table structure (at least I understand so) , but what is the new table structure and how can I build it ? Thanks, ilker ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Wednesday, May 24, 2006 5:18 PM To: Vaclav Kubart Cc: serusers(a)iptel.org Subject: RE: [Serusers] new table version Hi, I've already tried that. Doesn't work... I guess the new CVS version has some new table structure but that's not updated on the database creating scripts. How can I learn the new database structure ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Wednesday, May 24, 2006 4:30 PM To: İlker Aktuna (Koç.net) Cc: Andrey Kouprianov; serusers(a)iptel.org Subject: Re: [Serusers] new table version Drop tables and create them again (both with ser_mysql) - this should work. Vaclav On Wed, May 24, 2006 at 04:16:59PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > what's the bad idea ? > "reinit" ? > it doesn't work. Anyway, I couldn't start new CVS installation with mysql... > > any idea ? > > regards, > ilker > > > ________________________________ > > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey > Kouprianov > Sent: Wednesday, May 24, 2006 4:14 PM > To: serusers(a)iptel.org > Subject: Re: [Serusers] new table version > > > dont mind that... bad idea.. > > > On 5/24/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > maybe "ser_mysql.sh reinit"? > > > On 5/24/06, ?lker Aktuna (Koç. net) < ilkera(a)koc.net <mailto:ilkera@koc.net> > wrote: > > > > Hi, > > I reinstalled a new CVS version of Ser today. I receive the following errors. It says that this version uses a new table structure I guess. > But the suggested command "ser_mysql.sh reinstall" does not exist. ser_mysql.sh does not have "reinstall" parameter. > > What can I do to build the new tables ? > > May 24 15:40:43 sesapp /root/ser/sbin/ser[23613]: domain_fixup(): Error while registering domain > May 24 15:44:35 sesapp /root/ser/sbin/ser[23655]: register_udomain(): > Invalid table version (use ser_mysql.sh reinstall) > > Thanks, > ilker > > > C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi, Doesn't anyone else get the same problem when using the newest CVS version ? It requires a new table structure (at least I understand so) , but what is the new table structure and how can I build it ? Thanks, ilker ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Wednesday, May 24, 2006 5:18 PM To: Vaclav Kubart Cc: serusers(a)iptel.org Subject: RE: [Serusers] new table version Hi, I've already tried that. Doesn't work... I guess the new CVS version has some new table structure but that's not updated on the database creating scripts. How can I learn the new database structure ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Wednesday, May 24, 2006 4:30 PM To: İlker Aktuna (Koç.net) Cc: Andrey Kouprianov; serusers(a)iptel.org Subject: Re: [Serusers] new table version Drop tables and create them again (both with ser_mysql) - this should work. Vaclav On Wed, May 24, 2006 at 04:16:59PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > what's the bad idea ? > "reinit" ? > it doesn't work. Anyway, I couldn't start new CVS installation with mysql... > > any idea ? > > regards, > ilker > > > ________________________________ > > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey > Kouprianov > Sent: Wednesday, May 24, 2006 4:14 PM > To: serusers(a)iptel.org > Subject: Re: [Serusers] new table version > > > dont mind that... bad idea.. > > > On 5/24/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > maybe "ser_mysql.sh reinit"? > > > On 5/24/06, ?lker Aktuna (Koç. net) < ilkera(a)koc.net <mailto:ilkera@koc.net> > wrote: > > > > Hi, > > I reinstalled a new CVS version of Ser today. I receive the following errors. It says that this version uses a new table structure I guess. > But the suggested command "ser_mysql.sh reinstall" does not exist. ser_mysql.sh does not have "reinstall" parameter. > > What can I do to build the new tables ? > > May 24 15:40:43 sesapp /root/ser/sbin/ser[23613]: domain_fixup(): Error while registering domain > May 24 15:44:35 sesapp /root/ser/sbin/ser[23655]: register_udomain(): > Invalid table version (use ser_mysql.sh reinstall) > > Thanks, > ilker > > > <http://387555.sigclick.mailinfo.com/sigclick/000F0602/04074805/0B034D05/237…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

Re: [Serusers] upload script in presence snapshot
by Vaclav Kubart 25 May '06

25 May '06

Run "make" in the directory src/upload or you can call a C compiler (like gcc) directly to the source file. Vaclav On Wed, May 24, 2006 at 11:19:39PM -0300, Gustavo Moreira wrote: > In the README document included with the presence snapshot (xcap/README) > says that a script must be created from C source in src/upload. I've got the > source but I don't know how to create the script :-P > > Could someone help me? > > Thanks, > > Gustavo. > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Users] (no subject)
by raviprakash sunkara 25 May '06

25 May '06

Hi. Please help on openser a -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

1 0

[Serusers] upload script in presence snapshot
by Gustavo Moreira 25 May '06

25 May '06

In the README document included with the presence snapshot (xcap/README) says that a script must be created from C source in src/upload. I've got the source but I don't know how to create the script :-P Could someone help me? Thanks, Gustavo.

1 0

[Users] mediaproxy performance
by unplug 25 May '06

25 May '06

I am using openser + mediaproxy. From the top, I found the the CPU usage is increased when the number of sessions increased. When the system handling 30 current sessions, the CPU usage is occupied by python on 80%. When the system handling 40 current sessions, the CPU usage is occupied by python over 90% and the system is hanged somehow. As I know, mediaproxy is written by python. That's mean mediaproxy uses much CPU resource for handling RTP session. Is it the real case of using mediaproxy? If I want to handle more RTP session, what can I do (use rtpproxy)? Thanks!

1 0

FW: [Serusers] Monitoring SER
by Richard C. Thompson 24 May '06

24 May '06

We use SER on a large scale too and I had to develop my own apps (with some help from this list) that monitor SER and the Mediaproxy server (wrote my own MIB), so if anyone has info on monitoring I would be interested as well. Rick -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of David Sent: Tuesday, May 23, 2006 5:37 AM To: serusers(a)iptel.org Subject: [Serusers] Monitoring SER Hi, My company has deployed SER on a very large scale across the US and I would like to develop a way to monitor critical parts of SER and the servers that SER runs on. I have several questions regarding monitoring SER. 1. Can SER be SNMP enabled via something like SMUX or AgentX from net-snmp? 2. Does SER have any native SNMP support or other monitoring/logging hooks built in? 3. Do any mibs exist for SER / SIP? 4. I am also still trying to find out if SER has anyway to detect when a user looses registration either via SER internals or external watchdog scripts etc. Thanks David _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers

1 0

[Users] (no subject)
by Brandon Price 24 May '06

24 May '06

Did the rewrtiehostport syntax change between 1.0.x and 1.1.x? This is the last thing I have not been able to resolve since upgrading to 1.1.x testing. for example where ... if ((method =~ "INVITE" || method =~"ACK") && uri =~ "sip: \*123@.*") { if (is_user_in("From", "voicemail")){ setflag(1); rewriteuser("*123"); rewritehostport("127.0.0.1:5070"); t_relay(); return; } else { return; }; }; used to take an INVITE to *123(a)my.sip.proxy and toss them to 127.0.0.1:5070 since upgrading it no longer does. Instead I get ... my.home.machine.ip -> my.sip.proxy.ip SIP/SDP Request: INVITE sip:*123@eastern.ionoc.net, with session description my.sip.proxy.ip -> my.home.machine.ip SIP Status: 100 trying -- your call is important to us my.sip.proxy.ip -> my.home.machine.ip SIP Status: 408 Request Timeout my.home.machine.ip -> my.sip.proxy.ip SIP Request: ACK sip:*123@eastern.ionoc.net where the 408 occurs after whatever I have set in "modparam("tm", "fr_timer", X)" This is taking place anywhere else in the openser.cfg that I have a rewritehostport as well. Any clues?

1 0

RE: [Serusers] backup route
by Vince Hoffman 24 May '06

24 May '06

Do you have debug=8 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) in your ser.cfg ? if not then have a look in syslog and see if its logged the details there. Vince ------------------------------------- mnet Internet Limited Support Services Helpdesk: 0870 3335577 Fax: +44 (0)20 7324 3900 Email: support(a)mnet.co.uk Web: www.mnet.co.uk 132-140 Goswell Road London EC1V 7DY -----Original Message----- From: Giuseppe Parlato [mailto:gparlato@tnet.it] Sent: 24 May 2006 15:30 To: Tobias Lindgren Cc: serusers(a)iptel.org Subject: Re: [Serusers] backup route Starting ser: ERROR: bad config file (2 errors) ser -c ..... config file ok, exiting... !!!really going crazy Giuseppe ----- Original Message ----- From: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> To: "Giuseppe Parlato" <gparlato(a)tnet.it> Cc: <> Sent: Wednesday, May 24, 2006 4:19 PM Subject: Re: [Serusers] backup route > Hi, > > "ser -c" will tell you exactly which row that's not correct, also it > will in many cases tell you what you have done wrong. > > Br, > Tobias > > Giuseppe Parlato said the following on 2006-05-24 16:11: >> help please, I'm going crazy. I still get 2 errors... where? >> the new configuration: >> >> if (lookup("location")) { >> rewritehost("mydomain.com"); >> } else { >> if ((uri=~"^sip:6200[0-9]+@") && (!uri=~"^sip:6200200@") && >> (!uri=~"^sip:6200100@") ) { >> rewritehost("routerA"); >> forward(uri:host, uri:port); >> break; >> } else { >> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >> (uri=~"^sip:1515@")) { >> route(3); >> break; >> } >> }; >> }; >> >> >> route[3] { >> rewritehost("routerB"); >> forward(uri:host, uri:port); >> t_on_failure("3"); >> t_relay(); >> } >> >> failure_route[3] { >> rewritehost("routerC"); >> forward(uri:host, uri:port); >> append_branch(); >> t_relay(); >> } >> >> >> >> how do I have to use } or }; ?? >> >> >> Giuseppe >> >> >> ----- Original Message ----- >> From: "Giuseppe Parlato" <gparlato(a)tnet.it> >> To: <serusers(a)iptel.org> >> Cc: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> >> Sent: Tuesday, May 23, 2006 1:20 PM >> Subject: Re: [Serusers] backup route >> >> >>> yes.. t_on_failure is "4" .. but when I restart ser I get 8 errors in >>> config file, is there any way to check where these errors are? >>> >>> route[3] { >>> >>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>> (uri=~"^sip:1515@")) { >>> route(4); >>> } >>> >>> route[4] { >>> rewritehost("routerA cisco IP"); >>> forward(uri:host, uri:port); >>> t_on_failure("4"); >>> t_relay(); >>> } >>> >>> failure_route[4] { >>> rewritehost("routerB cisco IP"); >>> forward(uri:host, uri:port); >>> append_branch(); >>> t_relay(); >>> } >>> >>> >>> Giuseppe >>> >>> ----- Original Message ----- >>> From: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> >>> To: "Giuseppe Parlato" <gparlato(a)tnet.it> >>> Cc: <serusers(a)iptel.org> >>> Sent: Tuesday, May 23, 2006 12:39 PM >>> Subject: Re: [Serusers] backup route >>> >>> >>>> Yep, that works fine. >>>> >>>> But t_on_failuer("X") == failure_route[X], so t_on_failure should be 4, >>>> if you use failure_route[4]. >>>> >>>> /T >>>> >>>> Giuseppe Parlato said the following on 2006-05-23 12:25: >>>>> actually this is a subroute.. >>>>> >>>>> route[3] { >>>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>>> (uri=~"^sip:1515@")) { >>>>> rewritehost("ip"); >>>>> forward(uri:host, uri:port); >>>>> break; >>>>> }; >>>>> >>>>> .. called by he main route >>>>> >>>>> if ((uri=~"^sip:1200[0-9]+@") && (!uri=~"^sip:1200200@") && >>>>> (!uri=~"^sip:1200100@") ) { >>>>> rewritehost("ip"); >>>>> forward(uri:host, uri:port); >>>>> break; >>>>> >>>>> } else { >>>>> route(3); >>>>> break; >>>>> >>>>> ..can I do like this?? call a subroute [4] from e subroute [3]? >>>>> >>>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>>> (uri=~"^sip:1515@")) { >>>>> route(4); >>>>> } >>>>> route[4] { >>>>> rewritehostport("192.168.0.1:5060"); >>>>> t_on_failure("1"); >>>>> t_relay(); >>>>> } >>>>> >>>>> failure_route[4] { >>>>> rewritehostport("192.168.0.2:5060"); >>>>> append_branch(); >>>>> t_relay(); >>>>> } >>>>> >>>>> >>>>> Giuseppe >>>>> >>>>> ----- Original Message ----- >>>>> From: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> >>>>> To: "Giuseppe Parlato" <gparlato(a)tnet.it> >>>>> Cc: <serusers(a)iptel.org> >>>>> Sent: Tuesday, May 23, 2006 9:56 AM >>>>> Subject: Re: [Serusers] backup route >>>>> >>>>> >>>>>> Hello, >>>>>> >>>>>> You can use the "route[]" and "failure_route[]" functions in ser.cfg. >>>>>> >>>>>> A short example: >>>>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>>>> (uri=~"^sip:1515@")) { >>>>>> route(1); >>>>>> } >>>>>> route[1] { >>>>>> rewritehostport("192.168.0.1:5060"); >>>>>> t_on_failure("1"); >>>>>> t_relay(); >>>>>> } >>>>>> >>>>>> failure_route[1] { >>>>>> rewritehostport("192.168.0.2:5060"); >>>>>> append_branch(); >>>>>> t_relay(); >>>>>> } >>>>>> >>>>>> This above would relay on that you have the "tm.so" module loaded. >>>>>> Also, >>>>>> the tm-module has some parameters for timeouts and stuff (such as >>>>>> fr_timer) which you should laborate with. >>>>>> >>>>>> Good luck! >>>>>> >>>>>> Br, >>>>>> Tobias >>>>>> >>>>>> Giuseppe Parlato said the following on 2006-05-22 18:04: >>>>>>> When calling some numbers I have to forward calls to a router >>>>>>> cisco (then it wil forward calls out through isdn) or to a backup >>>>>>> router >>>>>>> cisco if the first one is busy. The route to primary cisco router >>>>>>> works >>>>>>> but I don't know how to implement the backup route in ser.cfg ? how >>>>>>> can >>>>>>> I configure a backup route in sip server? >>>>>>> I hope someone can answer me soon, I'm in trouble :| >>>>>>> >>>>>>> >>>>>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>>>>> (uri=~"^sip:1515@")) { >>>>>>> rewritehost("router IP"); >>>>>>> forward(uri:host, uri:port); >>>>>>> break; >>>>>>> }; >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Giuseppe >>>>>>> >>>>>>> >>>>>>> ------------------------------------------------------------------------ >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Serusers mailing list >>>>>>> Serusers(a)iptel.org >>>>>>> http://mail.iptel.org/mailman/listinfo/serusers >>>>>> >>>>>> >>>>>> -- >>>>>> No virus found in this incoming message. >>>>>> Checked by AVG Free Edition. >>>>>> Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: >>>>>> 19/05/2006 >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> No virus found in this incoming message. >>>> Checked by AVG Free Edition. >>>> Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: >>>> 22/05/2006 >>>> >>>> >>> >> > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.7.0/346 - Release Date: 23/05/2006 > _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers This message has been scanned for viruses by 3Labs - www.mnet.net.uk

3 2

[Users] please help me...........................................!!!!!!!!!!!!!!!!!!!!!!!!!!!11
by raviprakash sunkara 24 May '06

24 May '06

Hi Everybody.. Good morning. please help me i? Did anyone tell where " SIP training " held in India or any other place .... please excuse me for asking this , Bye -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

Re: [Serusers] backup route
by Giuseppe Parlato 24 May '06

24 May '06

help please, I'm going crazy. I still get 2 errors... where? the new configuration: if (lookup("location")) { rewritehost("mydomain.com"); } else { if ((uri=~"^sip:6200[0-9]+@") && (!uri=~"^sip:6200200@") && (!uri=~"^sip:6200100@") ) { rewritehost("routerA"); forward(uri:host, uri:port); break; } else { if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(3); break; } }; }; route[3] { rewritehost("routerB"); forward(uri:host, uri:port); t_on_failure("3"); t_relay(); } failure_route[3] { rewritehost("routerC"); forward(uri:host, uri:port); append_branch(); t_relay(); } how do I have to use } or }; ?? Giuseppe ----- Original Message ----- From: "Giuseppe Parlato" <gparlato(a)tnet.it> To: <serusers(a)iptel.org> Cc: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> Sent: Tuesday, May 23, 2006 1:20 PM Subject: Re: [Serusers] backup route > yes.. t_on_failure is "4" .. but when I restart ser I get 8 errors in > config file, is there any way to check where these errors are? > > route[3] { > > if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | > (uri=~"^sip:1515@")) { > route(4); > } > > route[4] { > rewritehost("routerA cisco IP"); > forward(uri:host, uri:port); > t_on_failure("4"); > t_relay(); > } > > failure_route[4] { > rewritehost("routerB cisco IP"); > forward(uri:host, uri:port); > append_branch(); > t_relay(); > } > > > Giuseppe > > ----- Original Message ----- > From: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> > To: "Giuseppe Parlato" <gparlato(a)tnet.it> > Cc: <serusers(a)iptel.org> > Sent: Tuesday, May 23, 2006 12:39 PM > Subject: Re: [Serusers] backup route > > >> Yep, that works fine. >> >> But t_on_failuer("X") == failure_route[X], so t_on_failure should be 4, >> if you use failure_route[4]. >> >> /T >> >> Giuseppe Parlato said the following on 2006-05-23 12:25: >>> actually this is a subroute.. >>> >>> route[3] { >>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>> (uri=~"^sip:1515@")) { >>> rewritehost("ip"); >>> forward(uri:host, uri:port); >>> break; >>> }; >>> >>> .. called by he main route >>> >>> if ((uri=~"^sip:1200[0-9]+@") && (!uri=~"^sip:1200200@") && >>> (!uri=~"^sip:1200100@") ) { >>> rewritehost("ip"); >>> forward(uri:host, uri:port); >>> break; >>> >>> } else { >>> route(3); >>> break; >>> >>> ..can I do like this?? call a subroute [4] from e subroute [3]? >>> >>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>> (uri=~"^sip:1515@")) { >>> route(4); >>> } >>> route[4] { >>> rewritehostport("192.168.0.1:5060"); >>> t_on_failure("1"); >>> t_relay(); >>> } >>> >>> failure_route[4] { >>> rewritehostport("192.168.0.2:5060"); >>> append_branch(); >>> t_relay(); >>> } >>> >>> >>> Giuseppe >>> >>> ----- Original Message ----- >>> From: "Tobias Lindgren" <tobias.lindgren(a)ip-only.se> >>> To: "Giuseppe Parlato" <gparlato(a)tnet.it> >>> Cc: <serusers(a)iptel.org> >>> Sent: Tuesday, May 23, 2006 9:56 AM >>> Subject: Re: [Serusers] backup route >>> >>> >>>> Hello, >>>> >>>> You can use the "route[]" and "failure_route[]" functions in ser.cfg. >>>> >>>> A short example: >>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>> (uri=~"^sip:1515@")) { >>>> route(1); >>>> } >>>> route[1] { >>>> rewritehostport("192.168.0.1:5060"); >>>> t_on_failure("1"); >>>> t_relay(); >>>> } >>>> >>>> failure_route[1] { >>>> rewritehostport("192.168.0.2:5060"); >>>> append_branch(); >>>> t_relay(); >>>> } >>>> >>>> This above would relay on that you have the "tm.so" module loaded. >>>> Also, >>>> the tm-module has some parameters for timeouts and stuff (such as >>>> fr_timer) which you should laborate with. >>>> >>>> Good luck! >>>> >>>> Br, >>>> Tobias >>>> >>>> Giuseppe Parlato said the following on 2006-05-22 18:04: >>>>> When calling some numbers I have to forward calls to a router >>>>> cisco (then it wil forward calls out through isdn) or to a backup >>>>> router >>>>> cisco if the first one is busy. The route to primary cisco router >>>>> works >>>>> but I don't know how to implement the backup route in ser.cfg ? how >>>>> can >>>>> I configure a backup route in sip server? >>>>> I hope someone can answer me soon, I'm in trouble :| >>>>> >>>>> >>>>> if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | >>>>> (uri=~"^sip:1515@")) { >>>>> rewritehost("router IP"); >>>>> forward(uri:host, uri:port); >>>>> break; >>>>> }; >>>>> >>>>> Thanks >>>>> >>>>> Giuseppe >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> _______________________________________________ >>>>> Serusers mailing list >>>>> Serusers(a)iptel.org >>>>> http://mail.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> -- >>>> No virus found in this incoming message. >>>> Checked by AVG Free Edition. >>>> Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: >>>> 19/05/2006 >>>> >>>> >>> >> >> >> -- >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 22/05/2006 >> >> >

2 2

RE: [Serusers] new table version
by İlker Aktuna (Koç.net) 24 May '06

24 May '06

Hi, I've already tried that. Doesn't work... I guess the new CVS version has some new table structure but that's not updated on the database creating scripts. How can I learn the new database structure ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Wednesday, May 24, 2006 4:30 PM To: İlker Aktuna (Koç.net) Cc: Andrey Kouprianov; serusers(a)iptel.org Subject: Re: [Serusers] new table version Drop tables and create them again (both with ser_mysql) - this should work. Vaclav On Wed, May 24, 2006 at 04:16:59PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > what's the bad idea ? > "reinit" ? > it doesn't work. Anyway, I couldn't start new CVS installation with mysql... > > any idea ? > > regards, > ilker > > > ________________________________ > > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey > Kouprianov > Sent: Wednesday, May 24, 2006 4:14 PM > To: serusers(a)iptel.org > Subject: Re: [Serusers] new table version > > > dont mind that... bad idea.. > > > On 5/24/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > maybe "ser_mysql.sh reinit"? > > > On 5/24/06, ?lker Aktuna (Koç. net) < ilkera(a)koc.net <mailto:ilkera@koc.net> > wrote: > > > > Hi, > > I reinstalled a new CVS version of Ser today. I receive the following errors. It says that this version uses a new table structure I guess. > But the suggested command "ser_mysql.sh reinstall" does not exist. ser_mysql.sh does not have "reinstall" parameter. > > What can I do to build the new tables ? > > May 24 15:40:43 sesapp /root/ser/sbin/ser[23613]: domain_fixup(): Error while registering domain > May 24 15:44:35 sesapp /root/ser/sbin/ser[23655]: register_udomain(): > Invalid table version (use ser_mysql.sh reinstall) > > Thanks, > ilker > > > <http://387555.sigclick.mailinfo.com/sigclick/0609010D/04064D01/02054A0A/651…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] using G711 u-law a-law
by ravi reddy 24 May '06

24 May '06

Hi Masters, Iam using my SER on a public ip , and i register some users staying behind NAT till now every thing going smooth and when called from xten soft phone to another phone i can hear the ring but when i answered the phone i cannot hear in both sides any thing with pindrop silence I think there is problem in codecs or some thing else ? and iam using G711-u,G711a in both the phones can you please tell me the solution for this Iam using ser-0.9.6 mediaproxy-1.4.2 iam not using dispatcher looking for your help ... thanks in advance kindly Regards, Ravi.

2 1

[Users] DISPATCHER module
by Andrew And 24 May '06

24 May '06

I am using dispatcher module, when I put Destination List File IPs (Gateways) in numerical order and "ds_select_dst("1", "4")" the openser send Invites to all gateway in this files. But if the IPs (gateways) isn't in numerical order the openser send only the first gateway. Is this true or erro in my test? Example in numerical order: 10.0.0.1:5060 10.10.10.2:5060

2 2

RE: [Serusers] new table version
by İlker Aktuna (Koç.net) 24 May '06

24 May '06

Hi, what's the bad idea ? "reinit" ? it doesn't work. Anyway, I couldn't start new CVS installation with mysql... any idea ? regards, ilker ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: Wednesday, May 24, 2006 4:14 PM To: serusers(a)iptel.org Subject: Re: [Serusers] new table version dont mind that... bad idea.. On 5/24/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: maybe "ser_mysql.sh reinit"? On 5/24/06, İlker Aktuna (Koç. net) < ilkera(a)koc.net <mailto:ilkera@koc.net> > wrote: Hi, I reinstalled a new CVS version of Ser today. I receive the following errors. It says that this version uses a new table structure I guess. But the suggested command "ser_mysql.sh reinstall" does not exist. ser_mysql.sh does not have "reinstall" parameter. What can I do to build the new tables ? May 24 15:40:43 sesapp /root/ser/sbin/ser[23613]: domain_fixup(): Error while registering domain May 24 15:44:35 sesapp /root/ser/sbin/ser[23655]: register_udomain(): Invalid table version (use ser_mysql.sh reinstall) Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/03090E04/0C024D07/07034503/001…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/050E0602/04024D06/01054D05/166…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] new table version
by İlker Aktuna (Koç.net) 24 May '06

24 May '06

Hi, I reinstalled a new CVS version of Ser today. I receive the following errors. It says that this version uses a new table structure I guess. But the suggested command "ser_mysql.sh reinstall" does not exist. ser_mysql.sh does not have "reinstall" parameter. What can I do to build the new tables ? May 24 15:40:43 sesapp /root/ser/sbin/ser[23613]: domain_fixup(): Error while registering domain May 24 15:44:35 sesapp /root/ser/sbin/ser[23655]: register_udomain(): Invalid table version (use ser_mysql.sh reinstall) Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/03090E04/0C024D07/07034503/001…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 2

RE: [Users] P-Asserted-Identity
by Ty Manthey 24 May '06

24 May '06

Thanks Klaus, you pointed me in the right direction, I dropped my p_assert table and used the subscriber table instead. If you guys wouldn't mind looking this over for me when you get a chance, I would appreciate it. It seems to be working just fine, but I wouldn't mind a second opinion if there is a better way to do something. Here is what I ended up with: # ------------- avpops params -------------------- # define "from_hdr" as an alias to AVP ID 12 # modparam("avpops", "avp_aliases", "from_hdr=s:12") modparam("avpops", "avp_table", "avptable") modparam("avpops", "uuid_column", "contact") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "db_scheme", "scheme0:table=subcriber;uuid_col=uuid;username_col=username;value_type=stri ng") I moved this up to the "if method=register" section after my www challenge: # write sip_uri "from" as avp "from_hdr" avp_write("$from", "from_hdr"); And this is after "if method=invite": # Remove P-Asserted-Identity if it exist # remove_hf("P-Asserted-Identity"); # If Privacy header is set to ID make anonymous if (search("[Pp]rivacy:[^@][Ii][Dd][^@];") { append_hf("P-Asserted-Identity: <anonymous(a)anonymous.invalid>"); uac_replace_from("Anonymous","sip:anonymous@anonymous.invalid"); } # Else insert P-Asserted-Identity if (!search("[Pp]rivacy:[^@][Ii][Dd][^@];") { # P-Asserted-Identity Insertion # avp_printf("s:12", "<sip:$fU@64.192.174.8>"); avp_pushto("$P-Asserted-Identity", "s:12"); } Ty Manthey -----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Tuesday, May 23, 2006 5:05 To: Ty Manthey Cc: users(a)openser.org Subject: Re: [Users] P-Asserted-Identity Ty Manthey wrote: > This is kicking my butt. > > OpenSER 1.0.1 > > I just want the P-Asserted-Identity field to populate with info it gets out > of the "from" header. > > modules loaded: > loadmodule "/usr/lib/openser/modules/mysql.so" > > loadmodule "/usr/lib/openser/modules/avpops.so" > loadmodule "/usr/lib/openser/modules/sl.so" > loadmodule "/usr/lib/openser/modules/tm.so" > loadmodule "/usr/lib/openser/modules/rr.so" > loadmodule "/usr/lib/openser/modules/maxfwd.so" > loadmodule "/usr/lib/openser/modules/usrloc.so" > loadmodule "/usr/lib/openser/modules/registrar.so" > loadmodule "/usr/lib/openser/modules/textops.so" > > avpops params: > > modparam("avpops", "avp_url", "mysql://openser:xxxxxxx@localhost/openser") > modparam("avpops", "avp_aliases", "from=s:from") > modparam("avpops", "avp_table", "avptable") > modparam("avpops", "uuid_column", "contact") > modparam("avpops", "username_column", "username") > modparam("avpops", "domain_column", "domain") > modparam("avpops", "attribute_column", "attribute") > modparam("avpops", "value_column", "value") > modparam("avpops", "type_column", "type") > modparam("avpops", "db_scheme", > "scheme0:table=p_assert;uuid_col=uuid;username_col=username;value_type=strin > g") > > ( I built a table "p_assert" in the openser database with the above columns, > varchar(255) ) > > > attempted insertion: > > # P-Asserted-Identity Insertion > # > avp_write("$from", "s:from"); > avp_db_load("$from", "s:pai/p_assert"); > avp_printf("s:from", > "<sip:$fu(s:pai)@64.192.174.8>"); Not sure if this overwrite the previously created AVP or it creates a second one with the same name. Further - what is the problem? Pushing into the header or fetching from DB? Have you tried it without loading from DB? If this works, make it dynamically loading from DB. btw: I put the PAI into the rpid column in the subscriber table. Thus, the s:rpid gets loaded during authentication. regards klaus > remove_hf("P-Asserted-Identity"); > #avp_pushto("$P-Asserted-Identity/request", > "s:pai"); > append_hf("P-Asserted-Identity: > <sip:7034633348@64.192.174.8>\r\n"); > log(1,"***P asserted ID placed *** \n"); > > I think it's obvious I know enough to get myself into trouble, but I thought > populating the P-asserted header field with info out of the "From" header > wouldn't be this complicated. What am I missing/doing wrong? > > Thanks. > > > Ty Manthey > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

1 0

RE: [Users] Call-ID discrepancy
by Sam Lee 24 May '06

24 May '06

Because of this , it causes a problem for my RTPproxy. My RTP proxy reference the same dialog by the call-id , so if it is different from the initial call-id, the entire dialog will be interpreted as 2 separated sessions and RTP ports allocated differently. The end result ? , one way voice. Is this kind of behaviour correct ? -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Mike Williams Sent: Wednesday, May 24, 2006 7:47 PM To: users(a)openser.org Subject: Re: [Users] Call-ID discrepancy On Wednesday 24 May 2006 07:01, Daniel-Constantin Mierla wrote: > > I notice that during a dialog session from a UA to the server going > > to the PSTN gateway, it was refering to this Call-ID until the point > > when the request was forwarded to the PSTN gateway. When the PSTN > > gateway replies, it replied with a same Call-ID with a different IP > > address at the back (9ce97fd3-1a800040(a)123.234.123.234 > > <mailto:9ce97fd3-1a800040@123.234.123.234> ) > > That is very wrong. Maybe there is an ALG in the path which replaces > the private address with public ones, but that should not apply to the > call-id. The caller should reject the reply. I have actually seen an ALG do exactly that before, and my client dropped all messages coming back through it, as expected. ---Mike _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

[Users] BUG:tm:run_failure_handlers: stack level is 1!!
by alex4152 24 May '06

24 May '06

Dear all, help me please to understand - what it could be mean: this line appear in openser ( OpenSer (1.0.1) log: - May 23 21:16:05 sh /usr/local/sbin/openser[11409]: BUG:tm:run_failure_handlers: stack level is 1!! after execution this part of my config file: .... if (!((src_ip == 127.0.0.1) && (src_port == 5060))) { xlog("L_ALERT"," Flow: SER --> B2B ... \n"); rewritehost("127.0.0.1"); t_on_failure("1"); t_relay(); .... also it appear when on_reply section processed Failure_route[1] look like that: failure_route[1] { xlog("L_ALERT"," \n"); xlog("L_ALERT","Failure_Route[1]: \n"); # authentication reply received? if ( t_check_status("401") ) { xlog("L_ALERT"," Status code: [401] [Unauthorized] \n"); } ........ Thank you, Alexey

2 3

[Users] Call-ID discrepancy
by Sam Lee 24 May '06

24 May '06

Hi All, I notice during the NGREP session , there is this field called Call-ID . It is something like this format :- 9ce97fd3-1a800040(a)172.16.1.123 <mailto:9ce97fd3-1a800040@172.16.1.123> . According to the RFC , it is said that this field is generated by the UA who started the request. I was just wondering, how did they get the IP Address at the back ? Which IP Address did they reference it from ? >From the RFC, it also says that the all request/response in the dialog should use the same Call-ID. When they say this, does it mean the entire field with the ip address (eg. 9ce97fd3-1a800040(a)172.16.1.123 ) or just the front part of it (eg. 9ce97fd3-1a800040 ) ? I notice that during a dialog session from a UA to the server going to the PSTN gateway, it was refering to this Call-ID until the point when the request was forwarded to the PSTN gateway. When the PSTN gateway replies, it replied with a same Call-ID with a different IP address at the back (9ce97fd3-1a800040(a)123.234.123.234 ) 172.16.1.123 - Private address of the UA 123.234.123.234 - Public address of the UA Strange ? Give your comment. Somehow i feel that this implementation is wrong. Regards, Sam

3 2

[Users] Log messages
by raviprakash sunkara 24 May '06

24 May '06

Hi Good Morning. I updated the openser server in US server. When I making a calls from here(India). Its gives the log messages, which are mentioned below and its say " logining Time out ! contact Network Admin ". Its means its not register and server is not responded. ______________________________________________________ (c) 2004 Xten Networks, Inc. All rights reserved. X-Lite release 1105d build stamp 99999 License key: 6FCCC0CC7D9B0017E322142CCDFC1071 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5060 Attempting SIP protocol listen on: 192.168.2.55:5061 Established SIP protocol listen on: 192.168.2.55:5061 NAT firewall type discovered is forced. SIP: 192.168.2.55:5061 RTP: 192.168.2.55:8000 NAT: 61.17.248.68 PROXY#0: 24.98.157.209:5060 (inbound proxy server) OUTBOUND-PROXY#0: 24.98.157.209:5060 (outbound proxy server) SEND TIME: 1619765420 SEND >> 24.98.157.209:5060 REGISTER sip:24.98.157.209 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.55:5061;rport;branch=z9hG4bK7A9AF049E03A84E1671601A7F2B7900C From: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> >;tag=1069014297 To: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> > Contact: "sam" <sip:test2@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> :5061> Call-ID: 61886BDAE211AFF5EF8B8774BD2A59D3(a)24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> CSeq: 27109 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105d Content-Length: 0 SEND TIME: 1619766930 SEND >> 24.98.157.209:5060 REGISTER sip:24.98.157.209 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.55:5061;rport;branch=z9hG4bK7A9AF049E03A84E1671601A7F2B7900C From: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> >;tag=1069014297 To: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> > Contact: "sam" <sip:test2@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> :5061> Call-ID: 61886BDAE211AFF5EF8B8774BD2A59D3(a)24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> CSeq: 27109 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105d Content-Length: 0 SEND TIME: 1619769953 SEND >> 24.98.157.209:5060 REGISTER sip:24.98.157.209 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.55:5061;rport;branch=z9hG4bK7A9AF049E03A84E1671601A7F2B7900C From: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> >;tag=1069014297 To: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> > Contact: "sam" <sip:test2@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> :5061> Call-ID: 61886BDAE211AFF5EF8B8774BD2A59D3(a)24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> CSeq: 27109 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105d Content-Length: 0 SEND TIME: 1619776003 SEND >> 24.98.157.209:5060 REGISTER sip:24.98.157.209 SIP/2.0 Via: SIP/2.0/UDP 192.168.2.55:5061;rport;branch=z9hG4bK7A9AF049E03A84E1671601A7F2B7900C From: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> >;tag=1069014297 To: sam <sip:test2@24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> > Contact: "sam" <sip:test2@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> :5061> Call-ID: 61886BDAE211AFF5EF8B8774BD2A59D3(a)24.98.157.209<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=51#Comp…> CSeq: 27109 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105d Content-Length: 0 ______________________________________________________________ Here, in Local Network working fine with My openser server. What is nat traversal, outbound proxy server , inbound proxy server , is it need in openser and softphone ... Please help me. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

3 2

RE: [Serusers] error ser-0.10.99-dev35-pa-4_src or the last cvs versionof ser
by İlker Aktuna (Koç.net) 24 May '06

24 May '06

Hi Laurent, I also have this error when compiling. On which linux distribution you are installing it ? Did you find a solution ? Btw, do you also have problems with presence and watcherinfo. These features are not working on my installation. I keep getting "t_uac: no socket found" and "Can't send watcherinfo notification" errors. Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of Laurent Schweizer Sent: Tuesday, May 02, 2006 10:58 AM To: serusers(a)iptel.org; serdev(a)iptel.org Subject: [Serusers] error ser-0.10.99-dev35-pa-4_src or the last cvs versionof ser Hello, i try to compile ser-0.10.99-dev35-pa-4_src or the last cvs version of ser and i have always rhis error : Laurent gcc -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -DNAME='"sercmd"' -DVERSION='"0.1"' -DARCH='"x86_64"' -DOS='"linux"' -D__CPU_x86_64 -D__OS_linux -DUSE_READLINE -c sercmd.c -o sercmd.o gcc -Wl,-O2 -Wl,-E parse_listen_id.o sercmd.o -lresolv -lreadline -o sercmd /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tgetnum' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tgoto' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tgetflag' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `BC' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tputs' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `PC' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tgetent' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `UP' /usr/lib/gcc/x86_64-redhat-linux/3.4.5/../../../../lib64/libreadline.so: undefined reference to `tgetstr' collect2: ld returned 1 exit status make[1]: *** [sercmd] Error 1 make[1]: Leaving directory `/home/installsrc/ser_cvs/sip_router/utils/sercmd' ERROR: utils/sercmd/sercmd not compiled <http://387555.sigclick.mailinfo.com/sigclick/030A0700/05074D0E/07034C07/902…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Users] real loading
by unplug 24 May '06

24 May '06

I am using sipp to test the openser with the following result. It will create message 481 after a certain traffic. In what conditioin that openser will send 2 BYE to CISCO? When I increase the concurrent call to about 50, the system becomes unstable and almost hanged. I am concerning about the real loading of the openser. Does anyone can help me? --------------my scenario---------- call: 3 / sec concurrent call: 30 total call made: 1002 failed call: 21 failure rate: 21/1002 >From the log shown below, most of the error are created with message 481. SIP/2.0 481 Call Leg/Transaction Does Not Exist 10.30.18.235 10.30.18.234 10.30.0.211 UA-------------------BYE--> openser -- BYE--> CISCO -- BYE --> CISCO <-- 481 -- CISCO UA <------------------- 481--openser U 10.30.18.235:5060 -> 10.30.18.234:5060 BYE sip:936418703@10.30.0.211:5060 SIP/2.0. Via: SIP/2.0/UDP 10.30.18.235:5060;branch=z9hG4bK-104-10. Route: <sip:10.30.18.234;ftag=104;lr=on;nat=yes>. From: sipp <sip:889642688756@10.30.18.235:5060>;tag=104. To: sut <sip:36418703@10.30.18.234:5060>;tag=145085F8-1DF8. Call-ID: 104-13187(a)10.30.18.235. CSeq: 2 BYE. Contact: sip:889642688756@10.30.18.235:5060. Max-Forwards: 70. Subject: Performance Test. Content-Length: 0. U 10.30.18.234:5060 -> 10.30.0.211:5060 BYE sip:936418703@10.30.0.211:5060 SIP/2.0. Record-Route: <sip:10.30.18.234;ftag=104;lr=on>. Via: SIP/2.0/UDP 10.30.18.234;branch=z9hG4bKadce.370d22c5.0. Via: SIP/2.0/UDP 10.30.18.235:5060;rport=5060;branch=z9hG4bK-104-10. From: sipp <sip:889642688756@10.30.18.235:5060>;tag=104. To: sut <sip:36418703@10.30.18.234:5060>;tag=145085F8-1DF8. Call-ID: 104-13187(a)10.30.18.235. CSeq: 2 BYE. Contact: sip:889642688756@10.30.18.235:5060. Max-Forwards: 69. Subject: Performance Test. Content-Length: 0. U 10.30.18.234:5060 -> 10.30.0.211:5060 BYE sip:936418703@10.30.0.211:5060 SIP/2.0. Record-Route: <sip:10.30.18.234;ftag=104;lr=on>. Via: SIP/2.0/UDP 10.30.18.234;branch=z9hG4bKadce.370d22c5.0. Via: SIP/2.0/UDP 10.30.18.235:5060;rport=5060;branch=z9hG4bK-104-10. From: sipp <sip:889642688756@10.30.18.235:5060>;tag=104. To: sut <sip:36418703@10.30.18.234:5060>;tag=145085F8-1DF8. Call-ID: 104-13187(a)10.30.18.235. CSeq: 2 BYE. Contact: sip:889642688756@10.30.18.235:5060. Max-Forwards: 69. Subject: Performance Test. Content-Length: 0. U 10.30.0.211:53419 -> 10.30.18.234:5060 SIP/2.0 481 Call Leg/Transaction Does Not Exist. Via: SIP/2.0/UDP 10.30.18.234;branch=z9hG4bKadce.370d22c5.0,SIP/2.0/UDP 10.30.18.235:5060;rport=5060;branch=z9hG4bK-104-10. From: sipp <sip:889642688756@10.30.18.235:5060>;tag=104. To: sut <sip:36418703@10.30.18.234:5060>;tag=145085F8-1DF8. Call-ID: 104-13187(a)10.30.18.235. CSeq: 2 BYE. Content-Length: 0. U 10.30.18.234:5060 -> 10.30.18.235:5060 SIP/2.0 481 Call Leg/Transaction Does Not Exist. Via: SIP/2.0/UDP 10.30.18.235:5060;rport=5060;branch=z9hG4bK-104-10. From: sipp <sip:889642688756@10.30.18.235:5060>;tag=104. To: sut <sip:36418703@10.30.18.234:5060>;tag=145085F8-1DF8. Call-ID: 104-13187(a)10.30.18.235. CSeq: 2 BYE. Content-Length: 0.

2 2

[Users] Mediaproxy module, Symmetric RTP and softphone client
by Antoine Fressancourt 24 May '06

24 May '06

Hello, I wish to set up Openser in order to use the mediaproxy module to perform NAT traversal. I have tried to figure out which client to use, as it is required that the client is able to perform symmetric RTP operations. So I ask you all about which kind of softphone client you use in conjunction with the mediaproxy module, in which configuration... I wish to use X-lite or an open-source client, do you have any clue ? Thanks in advance for your help. Antoine Fressancourt

4 5

[Serusers] route certain sip invites to a certain sip server
by Gould, Aaron 23 May '06

23 May '06

How do I tell ser to route invites for every sip uri beginning with the number 1 to another sip server? I would want to route 1000(a)domain.com , 1001(a)domain.com and 1002(a)domain.com all to 5.0.0.10 my ser box is 0.8.12 on solaris 10 (5.0.0.12) 5.0.0.10 is a cisco call manager 4.0 with a sip trunk this sccp (skinny) to sip bridging is working a little bit but not completely. i get one-way audio then the calls disconnect after about 10 seconds if i dial sip to sccp. but if i dial sccp to sip, then the call rings through, but media (rtp) never flows either way and call drops after ~33 seconds in debugging a little with the cisco tac, we've seen that the TO: field in a invite to the ccm box is coming in with the wrong address...it's coming in 1001(a)5.0.0.12 but it seems that it should say 1001(a)5.0.0.10 is there a way to fix this? aaron

1 0

[Serusers] DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... )
by rusl 23 May '06

23 May '06

Hello, I'm having a problem.... Upon successful connection of a call, these messages appear, the SER server then automatically sends BYE to the main switch after exactly 30 seconds. Any ideas? Rusl. May 23 20:26:39 ex openser[6277]: DEBUG: timer routine:1,tl=0x2a9753fde8 next=(nil) May 23 20:26:39 ex openser[6277]: DEBUG: timer routine:4,tl=0x2a9753a828 next=(nil) May 23 20:26:39 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:39 ex openser[6277]: DEBUG: add_to_tail_of_timer[5]: 0x2a9753a828 May 23 20:26:39 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:26:41 ex openser[6277]: DEBUG: timer routine:5,tl=0x2a9753a828 next=(nil) May 23 20:26:41 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:41 ex openser[6277]: DEBUG: add_to_tail_of_timer[6]: 0x2a9753a828 May 23 20:26:41 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:26:43 ex openser[6277]: DEBUG: timer routine:2,tl=0x2a9753fc68 next=(nil) May 23 20:26:43 ex openser[6277]: DEBUG: wait_handler : removing 0x2a9753fbe8 from table May 23 20:26:43 ex openser[6277]: DEBUG: delete transaction 0x2a9753fbe8 May 23 20:26:43 ex openser[6277]: DEBUG: wait_handler : done May 23 20:26:43 ex openser[6276]: udp_rcv_loop: probing packet received from 193.4.117.138 57875 May 23 20:26:45 ex openser[6277]: DEBUG: timer routine:6,tl=0x2a9753a828 next=(nil) May 23 20:26:45 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:45 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:26:45 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:26:49 ex openser[6277]: DEBUG: timer routine:7,tl=0x2a9753a828 next=(nil) May 23 20:26:49 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:49 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:26:49 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:26:53 ex openser[6277]: DEBUG: timer routine:7,tl=0x2a9753a828 next=(nil) May 23 20:26:53 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:53 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:26:53 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:26:53 ex openser[6276]: udp_rcv_loop: probing packet received from 193.4.117.138 57875 May 23 20:26:57 ex openser[6277]: DEBUG: timer routine:7,tl=0x2a9753a828 next=(nil) May 23 20:26:57 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:26:57 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:26:57 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:27:01 ex openser[6277]: DEBUG: timer routine:7,tl=0x2a9753a828 next=(nil) May 23 20:27:01 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:27:01 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:27:01 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:27:04 ex openser[6276]: udp_rcv_loop: probing packet received from 193.4.117.138 57875 May 23 20:27:05 ex openser[6277]: DEBUG: timer routine:7,tl=0x2a9753a828 next=(nil) May 23 20:27:05 ex openser[6277]: DEBUG: retransmission_handler : request resending (t=0x2a9753a648, INVITE si ... ) May 23 20:27:05 ex openser[6277]: DEBUG: add_to_tail_of_timer[7]: 0x2a9753a828 May 23 20:27:05 ex openser[6277]: DEBUG: retransmission_handler : done May 23 20:27:08 ex openser[6277]: DEBUG: timer routine:0,tl=0x2a9753a848 next=(nil) May 23 20:27:08 ex openser[6277]: DEBUG: final_response_handler:stop retr. and send CANCEL (0x2a9753a648) May 23 20:27:08 ex openser[6277]: DEBUG:tm:t_should_relay_response: T_code=100, new_code=408 May 23 20:27:08 ex openser[6277]: DEBUG:tm:relay_reply: branch=0, save=0, relay=0 May 23 20:27:08 ex openser[6277]: parse_headers: flags=ffffffffffffffff

1 0

[Serusers] RE: PA error sending notifies
by İlker Aktuna (Koç.net) 23 May '06

23 May '06

So you are not able to use presence but other traffic (IM, voice etc.) is fine ? Do you know the xml parser library that your system has installed ? Vaclav, which library version do you use ? Thanks, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Tuesday, May 23, 2006 5:05 PM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)lists.iptel.org Subject: Re: PA error sending notifies Unfortunately I had no more time to look into it, so I have no more progress..I just saw that the contact header was not properly parsed and there were problems when selecting the local socket where to send the notifies from...I hope in the following weeks I find some more time to spend on it. Samuel. 2006/5/23, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi Samuel, > > Did you solve the issue where sending notifies would fail with error > code -7 ? > > "Can't send watcherinfo notification (-7)" > > If you solved it can you tell me how ? > > I believe the problem is occuring while creating the headers. Because > in "notify.c" I see that -7 is returned only while creating headers. > > Regards, > ilker > > > > > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, > icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. > Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz > ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic > bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or > entity to whom it is addressed , and may contain confidential > information. If you are not the intended recipient of this message or > you receive this mail in error, you should refrain from making any use > of the contents and from opening any attachment. In that case, please > notify the sender immediately and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the > presence of computer viruses. In doing so, however, sender cannot > warrant that virus or other forms of data corruption may not be > present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > <http://387555.sigclick.mailinfo.com/sigclick/0A090704/070D4E06/0F034C03/191…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 23 May '06

23 May '06

Hi Samuel, Did you solve the issue where sending notifies would fail with error code -7 ? "Can't send watcherinfo notification (-7)" If you solved it can you tell me how ? I believe the problem is occuring while creating the headers. Because in "notify.c" I see that -7 is returned only while creating headers. Regards, ilker <http://387555.sigclick.mailinfo.com/sigclick/01090E01/07014F06/07084506/121…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] SER cannot receives sip messages
by Pletli Antal 23 May '06

23 May '06

I also use 0.8.14, and this version is stable... -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Cesc Sent: Tuesday, May 23, 2006 3:57 PM To: Andrey Kouprianov Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] SER cannot receives sip messages No, didn't try 0.9.4 ... at least not extensibly enough to say it stops responding. The thing is that only sockets stop working ... serctl moni keeps doing its job ... Cesc On 5/23/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > Did you guys use 0.9.4? How did it work? Im using 0.9.6 as well > (migrated like a couple of months back). Should I downgrade back to 0.9.4? > > Im also facing many problems with serweb. I cant do CTD or IM from it. > :( I've been told it's some kind of socket selection problem, and > they're currently working on it. > > > On 5/23/06, Cesc <cesc.santa(a)gmail.com> wrote: > > Actually, i am suffering from the same ... i guess. I use 0.9.6. It > > is not once a month, but every few days ... i use a monitor script > > which pings with bogus register messages to the SER every few seconds. > > And after a while, no more messages are processed (not udp, not tcp) ... > > For me restarting ser is all is needed, but is annoying ... > > any idea on how to "investigate" this? > > > > Cesc > > > > On 5/23/06, Pletli Antal <a.pletli(a)euromacc.hu> wrote: > > > > > > > > > Hi list! > > > > > > I use ser version 0.9.5-pre4. > > > > > > About once in a month SER doesn't reveive SIP messages. The udp > > > buffer > of > > > port number 5060 become full. In this case i switch ser to debug > > > mode, > but i > > > cannot see any incoming message. Restarting ser sometimes helps, > > > but in > some > > > cases i have to restart the server machine. I cannot see any error > message > > > in syslog file. The databese connection and radius server works > correctly. > > > > > > Is this a network problem or any known problem? > > > > > > Best regards: > > > > > > Antal > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SER cannot receives sip messages
by Pletli Antal 23 May '06

23 May '06

Hi list! I use ser version 0.9.5-pre4. About once in a month SER doesn't reveive SIP messages. The udp buffer of port number 5060 become full. In this case i switch ser to debug mode, but i cannot see any incoming message. Restarting ser sometimes helps, but in some cases i have to restart the server machine. I cannot see any error message in syslog file. The databese connection and radius server works correctly. Is this a network problem or any known problem? Best regards: Antal

3 3

[Users] AVP/pseudo variables support for core
by Klaus Darilion 23 May '06

23 May '06

Hi! Is this supported (planned)? E.g. I need it for force_send_socket("$avp(s:socket)") regards klaus

2 1

[Users] PDT module
by Andrew And 23 May '06

23 May '06

In PDT module I look the prefix, and I change or add domain. But doc don´t speak if I have two domains by one prefix, and I need this options. Does some know if I have one prefix to 2 domains, Could I do parallel fork to these domains?

4 3

Re: [Serusers] alias problem
by Andrey Kouprianov 23 May '06

23 May '06

modparam("usrloc", "db_mode", 1) means text-mode what you need is *modparam("usrloc", "db_mode", 2)* ** On 5/23/06, Lubomir Salaga <lubomir.salaga(a)gmail.com> wrote: > > Yes I did enable the mysql module. I enabled > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > in ser.cfg. Then I changed > modparam("usrloc", "db_mode", 1) > and I added > lookup("aliases"); > I don't have to restart ser to lose the aliases. It disappeares without > restarting SER after a couple of seconds :( > > > > > > On 5/23/06, Andrey Kouprianov <andrey.kouprianov(a)gmail.com> wrote: > > Does it really add alias to mysql alias table or you still have not > > enabled mysql module (inside ser.cfg )? If you did not, then your > > aliases will be lost everytime you restart SER. > > > > On 5/23/06, Lubomir Salaga <lubomir.salaga(a)gmail.com> wrote: > > > > > > Hi all... > > > > > > I'm new to SER. > > > > > > I installed SER 0.8.2 and ser-mysql and i'm trying to add an alias to a > user > > > using serctl. It shows the 200OK message and it also adds the alias into > the > > > mysql alias table. The problem is that after short time, the alias table > is > > > empty and I can't call the user using the alias. > > > > > > I need to add the alias to call a softphone from a hardphone. > > > > > > Do you have any idea? Thanx... > > > > > > Lubomir Salaga > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

1 0

RE: [Users] P-Asserted-Identity
by Ty Manthey 23 May '06

23 May '06

You are not able to understand because I only partially understand what I am doing, and am therefore confused. Perhaps if I explain what I want to happen it would help? I would like to insert into the invite the P-Asserted-Id header in the format "<sip:+1NPANXXXXXX@customer.com>". I thought it best this info be pulled out of the From header. The way I understand it, data would be pulled out of the From header and placed into table "p_assert" in MySQL database. It is then pulled out of database and inserted into the invite header in the above format. However, I have gotten lost because I have never worked with avpops before, and the more I read the less sense it makes to me. I was running 0.9.5 until last week when I realized I would need 1.0.1 to accomplish this. Is this enough info? mysql> describe p_assert; +-----------+---------------+-------+-----+---------+--------+ | Field | Type | Null | Key | Default | Extra | +-----------+---------------+-------+-----+---------+--------+ | contact | varchar(255) | YES | | NULL | | | username | varchar(64) | YES | | NULL | | | domain | varchar(128) | YES | | NULL | | | privacy | varchar(11) | YES | | NULL | | | attribute | varchar(255) | YES | | NULL | | | value | varchar(255) | YES | | NULL | | | type | varchar(255) | YES | | NULL | | | uuid | varchar(255) | YES | | NULL | | +-----------+---------------+-------+-----+---------+--------+ The point of privacy would be so that if privacy=yes the P-Asserted-Id would read something like "<sip:anonymous@anonymous.invalid>" or similar. I kind of understand what Klaus was saying, so in the mean time I will try what he was saying. Thanks again. Ty Manthey -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Tuesday, May 23, 2006 4:30 To: Ty Manthey Cc: users(a)openser.org Subject: Re: [Users] P-Asserted-Identity I am not able to understand the steps you want to do to compose the PAI header. You write some values in different AVPs and use other to fill the PAI header. If you can explain a bit how your data is structured, we may be able to help. Cheers, Daniel On 05/23/06 01:31, Ty Manthey wrote: > This is kicking my butt. > > OpenSER 1.0.1 > > I just want the P-Asserted-Identity field to populate with info it gets out > of the "from" header. > > modules loaded: > loadmodule "/usr/lib/openser/modules/mysql.so" > > loadmodule "/usr/lib/openser/modules/avpops.so" > loadmodule "/usr/lib/openser/modules/sl.so" > loadmodule "/usr/lib/openser/modules/tm.so" > loadmodule "/usr/lib/openser/modules/rr.so" > loadmodule "/usr/lib/openser/modules/maxfwd.so" > loadmodule "/usr/lib/openser/modules/usrloc.so" > loadmodule "/usr/lib/openser/modules/registrar.so" > loadmodule "/usr/lib/openser/modules/textops.so" > > avpops params: > > modparam("avpops", "avp_url", "mysql://openser:xxxxxxx@localhost/openser") > modparam("avpops", "avp_aliases", "from=s:from") > modparam("avpops", "avp_table", "avptable") > modparam("avpops", "uuid_column", "contact") > modparam("avpops", "username_column", "username") > modparam("avpops", "domain_column", "domain") > modparam("avpops", "attribute_column", "attribute") > modparam("avpops", "value_column", "value") > modparam("avpops", "type_column", "type") > modparam("avpops", "db_scheme", > "scheme0:table=p_assert;uuid_col=uuid;username_col=username;value_type=strin > g") > > ( I built a table "p_assert" in the openser database with the above columns, > varchar(255) ) > > > attempted insertion: > > # P-Asserted-Identity Insertion > # > avp_write("$from", "s:from"); > avp_db_load("$from", "s:pai/p_assert"); > avp_printf("s:from", > "<sip:$fu(s:pai)@64.192.174.8>"); > remove_hf("P-Asserted-Identity"); > #avp_pushto("$P-Asserted-Identity/request", > "s:pai"); > append_hf("P-Asserted-Identity: > <sip:7034633348@64.192.174.8>\r\n"); > log(1,"***P asserted ID placed *** \n"); > > I think it's obvious I know enough to get myself into trouble, but I thought > populating the P-asserted header field with info out of the "From" header > wouldn't be this complicated. What am I missing/doing wrong? > > Thanks. > > > Ty Manthey > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Serusers] NAT and Contact header vs RFC3261
by Mihaly Zachar 23 May '06

23 May '06

Hi Everybody, I have a new SIP UA, what (related to RFC3261 -> 10.2.4) needs the same Concact header in the incoming "200 OK", what was sent out. I have found this thread about the topic: http://lists.iptel.org/pipermail/serusers/2005-March/016164.html Can sy help me to implement this ?? Do sy have a working example, how can I avoid the NAT problem ? I use nathelper and SER 0.9.4.. Thanks, Mihaly

2 2

[Serusers] single log-in
by Nhadie 23 May '06

23 May '06

Hi All, How can I make a user/extension to be authenticated only once, meaning i won't allow multiple log-ins from a single extension. Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

1 0

[Users] SBC in free software
by Manuel Ángel Rubio Jiménez 23 May '06

23 May '06

Hi guys, i've a doubt, Are there some SBC (Session Border Controller) in Free Software (under GPL or similiar)? Cheers. -- Manuel A. Rubio "Bombadil" Usuario de GNU/Linux #323628 acorde a http://counter.li.org/ GPG ID 1C84979D ftp://bosqueviejo.net/pub/bombadil.asc Técnico en Admin. Sistemas Informáticos

3 4

[Serusers] Snom doubling INVITE timer
by sip 23 May '06

23 May '06

First I'd like to say a HUGE thanks to Klaus Darilion for some help with setting the INVITE timer based on a DB value. I made a few modifications to the code in the discussion we had and I now have a way for users to set their INVITE timer with values stored in the DB. However, this allowed me to test things a little better with my Snom phone, and for some reason, all calls to my Snom phones double the INVITE timer values. If the timer is set to 5 seconds, calls to all other UAs fail over to voicemail in 5 seconds. Calls to Snom phones fail over in 10 seconds. If the timer is set to 10 seconds, calls to Snom phones fail over in 20 seconds. Anyone have any idea why this would occur and only occur to one particular UA? I'm completely stumped. N.

3 2

[Serusers] backup route
by Giuseppe Parlato 23 May '06

23 May '06

When calling some numbers I have to forward calls to a router cisco (then it wil forward calls out through isdn) or to a backup router cisco if the first one is busy. The route to primary cisco router works but I don't know how to implement the backup route in ser.cfg ? how can I configure a backup route in sip server? I hope someone can answer me soon, I'm in trouble :| if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("router IP"); forward(uri:host, uri:port); break; }; Thanks Giuseppe

3 6

[Users] Last changes before CVS freez
by Bogdan-Andrei Iancu 23 May '06

23 May '06

Hi everybody, during the latest days there were committed some last pending changes before freezing the CVS for starting the test period before the next release, Here is a short summary of these changes: 0) Core - forward and send functions merged by including the protocol, host and port into a single parameter like [proto:]host[:port]. Aligned to t_relay() and t_forward() format and NAPTR lookup enabled also - provides TLS client domains (name/socket based) and more script config capabilities 1) Accounting bugs fixed: - the "missed call" report will display as outgoing uri exactly the RURI used for that branch - the accounting report will display as outgoing uri the RURI of the winning branch behaviour fix: - the "missed call" flag has effect only on the next serial fork - once triggered to report a missed call (a serial fork step ended), the flag is automatically reset by module. To catch the potential "missed call" reports due next serial forks, you need to re-arm the flag from failure route. This behaviour gives full control over what branches should be or not accounted as "missed calls". - null pseudo-variable values are stored as "n/a" to keep consistency with acc format 2) TM module - TM API exports a new function for making public the selected branch (how the winning branch is selected must be transparent for the other modules) - fixed the branch selection algorithm - if the transaction was cancelled, the "487 Request cancelled" reply will have priority and it will be sent to UAC. -t_replicate() takes as parameter a SIP URI instead of a destination (in order to align the format as for append_branch() ). -t_replicate() uses the set branches to perform parallel replication to multiple destinations. 3) Registrar / USRLOC - usrloc is able to detect retransmissions based on Callid and Cseq. The retransmission detection is controlled via the new "cseq_delay" module parameter. REGISTER retransmissions (inside the cseq_delay interval) will not generate error, but they will be accepted and properly replied without any update on the location status. This solves the problem of retransmissions without having a statefull processing on requests. 4) TLSOPS module The idea was to have some TLS related functions which can be used in the routing script to check TLS parameters. There is only one function implemented : is_peer_verified() This function returns 1 if the message is received via TLS and the peer was verified during TLS connection handshake, otherwise it returns -1. All information from the certificate is exported to the script via pseudo-variables. Regards, Bogdan

2 6

[Serusers] alias problem
by Lubomir Salaga 23 May '06

23 May '06

Hi all... I'm new to SER. I installed SER 0.8.2 and ser-mysql and i'm trying to add an alias to a user using serctl. It shows the 200OK message and it also adds the alias into the mysql alias table. The problem is that after short time, the alias table is empty and I can't call the user using the alias. I need to add the alias to call a softphone from a hardphone. Do you have any idea? Thanx... Lubomir Salaga

2 1

Re: [Serusers] serctl, mysql and presence snapshot
by Vaclav Kubart 23 May '06

23 May '06

Hi, on Debian I have these packages (related to mysql) installed and it works for me: python2.3-mysqldb python-mysqldb libqt3c102-mt-mysql mysql-query-browser mysql-admin-common mysql-common mysql-query-browser-common libdbd-mysql-perl mysqlcc mysql-client mysql-doc-4.1 mysql-server-4.1 mysql-admin libmysqlclient14 libmysqlclient12 libmysqlclient10 php3-mysql libmysqlclient14-dev mysql-common-4.1 mysql-client-4.1 I'm using python 2.3. Vaclav On Fri, May 19, 2006 at 11:16:36AM +0200, Paul Heijmann wrote: > Hello, > > I found the tool and had to install Python-MySQL to get it work, > Only now I get an error indicating: > > ser_domain: (1251, 'Client does not support authentication protocol > requested by server; consider upgrading MySQL client'): OperationalError > > > I had a similar problem while getting to run the SER server, but I > solved that then to update the mysql-client and mysql-client-devel > packages. (Before that time I was running MySQL 5.0, but compiling SER > with version 3.2 client libraries). > > Currently, the following versions are installed: > mysql-4.1.18-1.fc3.remi > mysql-devel-4.1.18-1.fc3.remi > mySQL-shared-4.1.19-0.i386 (tried before also 4.1.18) > mySQL-shared-compat-4.1.19-0.i386 (tried before also 4.1.18) > MySQL-python-0.9.2-4.i386 > > Hope someone can shine a light on this! > > Kind regards, > Paul Heijmann. > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Friday, May 19, 2006 7:39 AM > To: Paul Heijmann > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] serctl, mysql and presence snapshot > > Hi, > I think that new serctl (in tools/serctl in source tree) works. May be > the old serctl version doesn't work (it is still installed), but this > doesn't correctly work with CVS SER too... > > In the presence handbook is described how to add users using new serctl > (I really tried it and it seemed to be working). > Vaclav > > On Thu, May 18, 2006 at 03:42:56PM +0200, Paul Heijmann wrote: > > Hi, > > > > I installed the presence snapshot (4.1) of SER but I have a problem > > that SERCTL doesn't work. > > It appears to be that the structure of the database has been changed. > > > > There seems to be a serctl in the package that I downloaded, but it > > seems to be the source, or part of that. > > I can't get it to work and I want to add some users to the database. > > > > Any ideas how to solve this? > > > > Kind regards, > > Paul Heijmann. > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers

3 2

[Users] P-Asserted-Identity
by Ty Manthey 23 May '06

23 May '06

This is kicking my butt. OpenSER 1.0.1 I just want the P-Asserted-Identity field to populate with info it gets out of the "from" header. modules loaded: loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/avpops.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/textops.so" avpops params: modparam("avpops", "avp_url", "mysql://openser:xxxxxxx@localhost/openser") modparam("avpops", "avp_aliases", "from=s:from") modparam("avpops", "avp_table", "avptable") modparam("avpops", "uuid_column", "contact") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") modparam("avpops", "db_scheme", "scheme0:table=p_assert;uuid_col=uuid;username_col=username;value_type=strin g") ( I built a table "p_assert" in the openser database with the above columns, varchar(255) ) attempted insertion: # P-Asserted-Identity Insertion # avp_write("$from", "s:from"); avp_db_load("$from", "s:pai/p_assert"); avp_printf("s:from", "<sip:$fu(s:pai)@64.192.174.8>"); remove_hf("P-Asserted-Identity"); #avp_pushto("$P-Asserted-Identity/request", "s:pai"); append_hf("P-Asserted-Identity: <sip:7034633348@64.192.174.8>\r\n"); log(1,"***P asserted ID placed *** \n"); I think it's obvious I know enough to get myself into trouble, but I thought populating the P-asserted header field with info out of the "From" header wouldn't be this complicated. What am I missing/doing wrong? Thanks. Ty Manthey

3 2

[Users] regarding on openser and softphones
by raviprakash sunkara 23 May '06

23 May '06

Hello everybody, I need help from you. Please sovle my issue in regard openser and softphone . I installed openser and x-lite softphone in box. In ' LAN ' network its working fine. But I keep openser server in other place giving with specific public ip as sip-domain and also sip-proxy damain. its not working its give " Time out contact network admin " What i need to give "listen " parameter in openser.cfg , i gave ip address of the system, if i gave the public ip as " listen " parameter its giving the error... in Dedug mode..as udp_init:bind(5, ox811994,16) on xx.xx.xx.xx:cannot assign requested address. These are my issues.. please help me. please excuse in my english if any mistakes.. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

2 1

[Users] Regard on oepnser and softphone
by raviprakash sunkara 23 May '06

23 May '06

Hello everybody, I need help from you. Please sovle my issue in regard openser and softphone . I installed openser and x-lite softphone in box. In ' LAN ' network its working fine. But I keep openser server in other place giving with specific public ip as sip-domain and also sip-proxy damain. its not working its give " Time out contact network admin " What i need to give "listen " parameter in openser.cfg , i gave ip address of the system, if i gave the public ip as " listen " parameter its giving the error... in Dedug mode... These are my issues.. please help me. please excuse in my english if any mistakes.. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Users] LCR
by Andrew And 22 May '06

22 May '06

Does someone know a good document about LCR in OpenSER?

1 0

Re: [Serusers] ser: cannot call behind a Nat using rtpproxy
by Americania .it 22 May '06

22 May '06

I've set the re-reg. to 1 minute but same problem. This is the log from X-Lite when I try to call the user ('vicky' @ LAN with ser; user 'claudio' behind Nat) : I receive this message on teh X.Lite screen : "We don't forward to private IP addresses" ---- Log ---- RECEIVE TIME: 21141441 RECEIVE << 80.105.2.110:5060 SIP/2.0 479 We don't forward to private IP addresses Via: SIP/2.0/UDP 192.168.0.102:5060;rport=12810;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB;received=62.101.126.230 From: claudio <sip:claudio@80.105.2.110>;tag=546620589 To: <sip:vicky@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.75e6 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31(a)192.168.0.102 CSeq: 53348 INVITE Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=12810 in_uri=sip:vicky@80.105.2.110 out_uri=sip:vicky@10.0.0.100:5060 via_cnt==1" SEND TIME: 21141444 SEND >> 80.105.2.110:5060 ACK sip:vicky@80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.102:5060;rport;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB From: claudio <sip:claudio@80.105.2.110>;tag=546620589 To: <sip:vicky@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.75e6 Contact: <sip:claudio@192.168.0.102:5060> Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31(a)192.168.0.102 CSeq: 53348 ACK Max-Forwards: 70 Content-Length: 0 ----- > >Try in your X-Lite set the Re-Registration to one minute then the default >1800. >Advanced Settings-> SIP settings -> ReRegister proxy >Ser will not detect the user agent as behind NAT and does not keep the >binding alive. >I don't know how it is done in Asterisk. Maybe Asterisk keeps in touch >with User agents by sending keep-alives no matter if the UA is behind NAT >or not. > >Ladislav > > >Americania .it wrote: >> >> >>What should I do? Something to set ? Why if I use the asterisk server >>instead of the ser one and the same voip clients (using users with the >>nat flag enabled) I can enstablish the communication without any problem ? >> >>Should I open port 8000 on the router of the Lan ? >> >>I 've attached the X-Lite Log when logging in : >> >>--------------------- >> >> >>© 2005 CounterPath Solutions Inc. All rights reserved. >>X-Lite release 1105x build stamp 21407 >>License key: B608ADE2A7C14E53835E7FF2EFAE95D0 >> >>Established SIP protocol listen on: 192.168.0.102:5060 >> >>NAT firewall type discovered is forced. >> >>Discovered Symmetric NAT Firewall >> >>SIP: 192.168.0.102:5060 >>RTP: 192.168.0.102:8000 >>NAT: 62.101.126.230 >> >>PROXY#0: 80.105.2.110:5060 >> >> >>SEND TIME: 1079327 >>SEND >> 80.105.2.110:5060 >>REGISTER sip:80.105.2.110 SIP/2.0 >>Via: SIP/2.0/UDP >>62.101.126.230:5060;rport;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 >>From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 >>To: claudio <sip:claudio@80.105.2.110> >>Contact: "claudio" <sip:claudio@62.101.126.230:5060> >>Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 >>CSeq: 9157 REGISTER >>Expires: 1800 >>Max-Forwards: 70 >>User-Agent: X-Lite release 1105x >>Content-Length: 0 >> >> >>RECEIVE TIME: 1079425 >>RECEIVE << 80.105.2.110:5060 >>SIP/2.0 401 Unauthorized >>Via: SIP/2.0/UDP >>62.101.126.230:5060;rport=39914;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 >> >>From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 >>To: claudio >><sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.4235 >>Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 >>CSeq: 9157 REGISTER >>WWW-Authenticate: Digest realm="80.105.2.110", >>nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6" >>Server: Sip EXpress router (0.9.4 (i386/linux)) >>Content-Length: 0 >>Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 >>req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 >>out_uri=sip:80.105.2.110 via_cnt==1" >> >> >>SEND TIME: 1079427 >>SEND >> 80.105.2.110:5060 >>REGISTER sip:80.105.2.110 SIP/2.0 >>Via: SIP/2.0/UDP >>62.101.126.230:5060;rport;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD >>From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 >>To: claudio <sip:claudio@80.105.2.110> >>Contact: "claudio" <sip:claudio@62.101.126.230:5060> >>Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 >>CSeq: 9158 REGISTER >>Expires: 1800 >>Authorization: Digest >>username="claudio",realm="80.105.2.110",nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6",response="91b05be86378bf515209116e96bd6314",uri="sip:80.105.2.110" >> >>Max-Forwards: 70 >>User-Agent: X-Lite release 1105x >>Content-Length: 0 >> >> >>RECEIVE TIME: 1079533 >>RECEIVE << 80.105.2.110:5060 >>SIP/2.0 200 OK >>Via: SIP/2.0/UDP >>62.101.126.230:5060;rport=39914;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD >> >>From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 >>To: claudio >><sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.d540 >>Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 >>CSeq: 9158 REGISTER >>Contact: <sip:claudio@62.101.126.230:5060>;expires=1800 >>Server: Sip EXpress router (0.9.4 (i386/linux)) >>Content-Length: 0 >>Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 >>req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 >>out_uri=sip:80.105.2.110 via_cnt==1" >> >>--------------------------------------- >> >> >>> >>>Hi, >>>probably the solution might be that your user agent in public will have >>>to re-register every minute or shorter time. >>>It is because the NAT binding between SER and the public user will be >>>closed if there is no SIP traffic. >>> >>>Ladislav >>> >>>Americania .it wrote: >>>>I've installed ser 0.9.4 on Suse 10 and it's running with mysql. >>>> >>>>I can register users (I'm using serweb) but I can only make a call from >>>>a user inside the Lan (where ser is installed) to a user outside behind >>>>a Nat (Fastweb network in Italy, Natted). If i call from this user >>>>behind Nat the call does not reach the other user. Viceversa it works >>>>fine. >>>> >>>>I installed the nathelper module and rtpproxy too. >>>> >>>>I don't know if I configured it well . Have I got to open some >>>>additional port in my router on the lan where ser is running (I opened >>>>port 5060 udp and tcp only)? >>>> >>>>I've tried to use Asterix on another pc in the same lan and I don't have >>>>this kind of problems with the some users and some clients (3cx phone). >>>> >>>>Any suggestions ? >>>> >>>>thanks >>>> >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>> >> >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >

3 3

[Users] RADIUS and multi-leg accounting
by Helge Waastad 22 May '06

22 May '06

Hi, Is there an attribute for Sip-Leg_Source and Sip-leg-Dest? When I enable multi_leg_enabled I receive: ERROR: acc: can't get code for the Sip-Leg-Source attribute I have'nt seen this attribute in any dictionary files. br hw

2 2

[Users] LCR problem
by Andrew And 22 May '06

22 May '06

I am using LCR but I have problem that I show below. Does someone know what is wrong? 0(0) PG[224] str2valp got string $IP1.$IP2.$IP3.236 0(0) PG[200] str2valp got int 5060 0(0) PG[224] str2valp got string g1.domain.com 0(0) PG[224] str2valp got string 0(0) PG[224] str2valp got string 19991 0(0) PG[224] str2valp got string $IP1.$IP2.$IP3.208 0(0) PG[200] str2valp got int 5060 0(0) PG[224] str2valp got string g2.domain.com 0(0) PG[224] str2valp got string 0(0) PG[224] str2valp got string 19992 0(0) PG[224] str2valp got string $IP1.$IP2.$IP3.196 0(0) PG[200] str2valp got int 5060 0(0) PG[224] str2valp got string g3.domain.com 0(0) PG[224] str2valp got string 0(0) PG[224] str2valp got string 19992 * 0(0) reload_gws(): Unknown or unsupported URI scheme: 136483472 * 0(0) PG[270] db_close entry * 0(0) ERROR: lcr:mod_init(): failed to reload gateways* *0(0) init_mod(): Error while initializing module lcr* *ERROR: error while initializing modules*

1 0

[Users] Relay in OpenSER
by Andrew And 22 May '06

22 May '06

SER, I have problem with OpenSER and ENUM, when I have 2 URI destination to 1 prefix e.164 my OpenSER is doing fork. How can I do fork? when I have 2 destination I need to send 2 Invites (FORK), but now my OpenSER is sendind only one Invite.

2 3

[Users] Empty proto in trusted table causes segfault
by Script Head 22 May '06

22 May '06

Just stumbled on this. Obviously there shouldn't be an empty field but also OpenSER should handle this gracefully.

5 6

[Users] CVS freez - testing for 1.1.0 release
by Bogdan-Andrei Iancu 22 May '06

22 May '06

Hi everybody, At midnight, Tuesday 00:00 GMT, the CVS will be frozen and the 1.1.0 branch will enter in a testing and fixing phase - no new stuff will be committed on the cvs, just bugs and conformity fixes. We encourage the users to intensively run and test this version and to report any bugs or misbehaviour. The target is to have the next release in about one month, when hopefully the cumulate fixes will provide a high level of the stability. So, please test and report any problem you found / think you found - this will help us to accelerate the process. Thanks and regards, Bogdan

1 0

[Users] rtpproxy issue
by krishnamurthy kandi 22 May '06

22 May '06

Hi, I am getting the problem with rtp proxy in the case of call forking from ser. After forking, one callee sends 183 session progress (early media),with this rtpsession is established in rtp proxy. Then other callee accept the call, starts sending media, in this case after calling recvfrom function ,raddr structure is not containing exact destination and port, it containts previous packet IP ,current packet port at comparing session IP and remote IPs, once IP is updated, canupdate flag is disabled, then for further invalid IP comparisons , it wont update the remote IP. Thats why rtp is not getting relayed to user agents. Why raddr variable is not containing correct IP and port, why it is showing corrupted information. For my convention I am not checking canupdate flag, now it is disabled, then it is working now.any suggitions. Thanks, kkmurthy --------------------------------- Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min with Yahoo! Messenger with Voice.

1 0

[Serusers] Question regarding PA snapshot
by Dave 22 May '06

22 May '06

Hi, I downloaded the Presence (PA) snapshot 4.1 and after hours trying to make it work with my OLD SER0.9.6 ser.cfg file, I realized the following: 1) The PA snapshot works with the example ser.cfg provided in the distribution 2) The PA snapshot is "different" from 0.9.6 in terms of DB schema, API's, etc. e.g. there is no "alias" table, subscriber has been renamed to "customer", etc. My questions: 1) Is the PA snapshot meant to run on a separate server handling only SUBSCRIBE, PUBLISH and MESSAGE which are to forwarded by the main SER PROXY? 2) Can I use my ser 0.9.6 proxy and forward all SUB, MESSAGE and PUBLISH to a different server running the PA snapshot? If yes, Do the two servers (SER 0.9.6 and PA 4.1) need to share the SER database or each will run it's own DB schema? 3) It seems that I cannot run my ser.cfg SER PROXY script on the PA 4.1 snapshot due to database and api issues. Does this mean that I need to modify my ser.cfg that does proxying to fit with the PA 4.1 api/database in order to use presence? Any pointers and help will be appreciated. Regards, Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 3

[Users] Multiple aliases -> 404 Not Found
by mika.saari＠wipsl.com 22 May '06

22 May '06

Hi, I do have four domain aliases for my openser server (clip of config below). Each alias should be handled by same server. I register three clients to the server Client 1 = client1(a)isp1v.test.com Client 2 = client2(a)isp1.test.com Client 3 = client3(a)isp1.test.com When calling from Client1 to Client2 (INVITE From URI: client1(a)isp1v.test.com To URI: client2(a)isp1.test.com) I get error 404 not found. But if I call from Client 3 to Client 2 the call is working nicely. I am mainly using the basic OpenSER configuration with minor changes and it seems that the save("location") is saving the registration ok, but lookup("location") won't find what ever it is trying to find when calling from Client1 to Client2. Any ideas, pointers or propably example openser configuration to handle this kind of configuration properly ? Thank you many times, -Mika -- clip --- debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) listen=193.65.64.130 #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" alias="isp1.test.com" alias="isp1v.test.com" alias="isp1s.test.com" alias="sip.isp1.test.com"

2 5

[Users] new to tls
by olivier.taylor 22 May '06

22 May '06

hi all, just a Tls noob question : how to monitor the Tls traffic on the server? using Ngrep or another tool? thanks, Olivier

2 1

[Users] port setting
by unplug 22 May '06

22 May '06

Hi, Can I add some more ports for openser other than 5060? Is there any port range using in openser? I have set one more port 6060 in my configuration file as below. listen=IP:5060 listen=IP:6060 port=5060 children=4 Users using port 5060 is working fine. However, those users using 6060 will experience call drop around 1 minute after connection. In the log from ngrep, I find message 408. SIP/2.0 408 Request Timeout It may the cause to drop the call. However, I have no idea why 6060 will get a call drop problem. Does it any other reason for it? Thanks for help.

2 1

[Users] tls
by Olivier Taylor 22 May '06

22 May '06

hi all, just a Tls noob question : how to monitor the Tls traffic on the server? using Ngrep or another tool? thanks, Olivier

1 0

[Users] Re: Users Digest, Vol 12, Issue 54
by Padmaja RV 22 May '06

22 May '06

Hi! I am a novice at openser. I have problems running the openser init script. I have done everything as mentioned in the below document. http://openser.org/dokuwiki/doku.php?id=make_openser.init_script_work I have downloaded and installed the monit s/w mentioned in the above page and did everythig that it suggested. However, when i run the /etc/init.d/openser start, it gives the following error: /etc/init.d/openser : line 64: /usr/local/bin/monit no such file or directory....... Please tell me what to do,,,,,,,, also, as I dont know anything about the monit configuration and the monitrc files, I have just copied the whole code below the line: vi /local/etc/monitrc file into that file which was otherwise empty. The URL is http://www.openser.org/dokuwiki/doku.php?id=make_openser.init_script_work I think the whole thing has to do something with the code there. Please tell me what is the correct way to do all this....................... Thanks and Regards ----- Original Message ----- From: <users-request(a)openser.org> To: <users(a)openser.org> Sent: Sunday, May 21, 2006 3:31 PM Subject: Users Digest, Vol 12, Issue 54 > Send Users mailing list submissions to > users(a)openser.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://openser.org/cgi-bin/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)openser.org > > You can reach the person managing the list at > users-owner(a)openser.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > > Today's Topics: > > 1. Empty proto in trusted table causes segfault (Script Head) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 20 May 2006 19:04:50 -0400 > From: "Script Head" <scripthead(a)gmail.com> > Subject: [Users] Empty proto in trusted table causes segfault > To: OpenSER-users <users(a)openser.org> > Message-ID: > <451eb55c0605201604w3c7e4ca3tb550ee843b23ed(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Just stumbled on this. Obviously there shouldn't be an empty field but > also > OpenSER should handle this gracefully. >

2 1

RE: [Serusers] Warining messages
by luke.2.pilgrim＠bt.com 22 May '06

22 May '06

Thanks for the info! Very helpful. Cheers, Luke. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: 19 May 2006 15:40 To: serusers(a)lists.iptel.org Subject: Re: [Serusers] Warining messages Inline. >WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx You probably dont have a resverse lookup entry in your DNS server. > Also I am able to connect to ser internally but not via it's external address. > I have rtpproxy installed and I'm using the nathelper module. Not sure if they are > configured correctly but they seem to be running. > > Does anyone have any ideas or could you tell me the best way to debug? for > example can I moniter registration requests coming in? If you work in command line # ngrep -W byline -O output.pcap INVITE port 5060 5060 - change to whatever port your SER's listening on and you can also view output.pcap in Ethereal later If you have GUI, then use Ethereal (latest is 0.99.0) Good luck :) On 5/19/06, luke.2.pilgrim(a)bt.com <luke.2.pilgrim(a)bt.com> wrote: > Hi all, > > I recieve the following warning messages when loadinf up ser: > > WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx > > Is this something to worry about? > > Also I am able to connect to ser internally but not via it's external address. I have rtpproxy installed and I'm using the nathelper module. Not sure if they are configured correctly but they seem to be running. > > My client is behing NAT but my server is publically available. Does anyone have any ideas or could you tell me the best way to debug? for example can I moniter registration requests coming in? > > Regards, > > Luke. > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Users] router with qos and compatible with stun
by Laurent Schweizer 22 May '06

22 May '06

Hello, I have a client that needs 20-26 simultaneous voip connections and I don't want to relay all this traffic. So I m looking for a router with non symmetric NAT for SDSL. (to use STUN) If someone know and can recommend me a good router. Thanks Laurent

3 2

[Serusers] Problem with ser snapshot 0.10.99-dev35-pa-4.1
by Dave 22 May '06

22 May '06

Hi, I compiled and installed it but I get errors relating to "table version#" when I start ser. I checked and it was complaining about "aliases' table version#. But the "aliases" table is NOT being created by the database creation script. Any suggestions wheter I need the "aliases" table? If yes, where do I get the schema and version # for it? THanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Users] PDT Module
by Andrew And 21 May '06

21 May '06

In PDT module I look the prefix, and I change or add domain. But doc don´t speak if I have two domains by one prefix, and I need this options. Does some know if I have one prefix to 2 domains, Could I to do parallel fork to domains?

1 0

Re: [Serusers] ser: cannot call behind a Nat using rtpproxy
by Americania .it 20 May '06

20 May '06

What should I do? Something to set ? Why if I use the asterisk server instead of the ser one and the same voip clients (using users with the nat flag enabled) I can enstablish the communication without any problem ? Should I open port 8000 on the router of the Lan ? I 've attached the X-Lite Log when logging in : --------------------- © 2005 CounterPath Solutions Inc. All rights reserved. X-Lite release 1105x build stamp 21407 License key: B608ADE2A7C14E53835E7FF2EFAE95D0 Established SIP protocol listen on: 192.168.0.102:5060 NAT firewall type discovered is forced. Discovered Symmetric NAT Firewall SIP: 192.168.0.102:5060 RTP: 192.168.0.102:8000 NAT: 62.101.126.230 PROXY#0: 80.105.2.110:5060 SEND TIME: 1079327 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110> Contact: "claudio" <sip:claudio@62.101.126.230:5060> Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9157 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0 RECEIVE TIME: 1079425 RECEIVE << 80.105.2.110:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.4235 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9157 REGISTER WWW-Authenticate: Digest realm="80.105.2.110", nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6" Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1" SEND TIME: 1079427 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110> Contact: "claudio" <sip:claudio@62.101.126.230:5060> Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9158 REGISTER Expires: 1800 Authorization: Digest username="claudio",realm="80.105.2.110",nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6",response="91b05be86378bf515209116e96bd6314",uri="sip:80.105.2.110" Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0 RECEIVE TIME: 1079533 RECEIVE << 80.105.2.110:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD From: claudio <sip:claudio@80.105.2.110>;tag=4251097143 To: claudio <sip:claudio@80.105.2.110>;tag=2a08c327b8d597781b526eaf86695180.d540 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD(a)80.105.2.110 CSeq: 9158 REGISTER Contact: <sip:claudio@62.101.126.230:5060>;expires=1800 Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1" --------------------------------------- > >Hi, >probably the solution might be that your user agent in public will have to >re-register every minute or shorter time. >It is because the NAT binding between SER and the public user will be >closed if there is no SIP traffic. > >Ladislav > >Americania .it wrote: >>I've installed ser 0.9.4 on Suse 10 and it's running with mysql. >> >>I can register users (I'm using serweb) but I can only make a call from a >>user inside the Lan (where ser is installed) to a user outside behind a >>Nat (Fastweb network in Italy, Natted). If i call from this user behind >>Nat the call does not reach the other user. Viceversa it works fine. >> >>I installed the nathelper module and rtpproxy too. >> >>I don't know if I configured it well . Have I got to open some additional >>port in my router on the lan where ser is running (I opened port 5060 udp >>and tcp only)? >> >>I've tried to use Asterix on another pc in the same lan and I don't have >>this kind of problems with the some users and some clients (3cx phone). >> >>Any suggestions ? >> >>thanks >> >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >

2 1

[Serusers] ser: cannot call behind a Nat using rtpproxy
by Americania .it 20 May '06

20 May '06

I've installed ser 0.9.4 on Suse 10 and it's running with mysql. I can register users (I'm using serweb) but I can only make a call from a user inside the Lan (where ser is installed) to a user outside behind a Nat (Fastweb network in Italy, Natted). If i call from this user behind Nat the call does not reach the other user. Viceversa it works fine. I installed the nathelper module and rtpproxy too. I don't know if I configured it well . Have I got to open some additional port in my router on the lan where ser is running (I opened port 5060 udp and tcp only)? I've tried to use Asterix on another pc in the same lan and I don't have this kind of problems with the some users and some clients (3cx phone). Any suggestions ? thanks

2 1

[Serusers] Registering users please help
by ravi reddy 20 May '06

20 May '06

HI Friends, Yesterday I had given a public ip to my linux box and trying to test calls .so, in order to register the users i made the command serctl ul add <username/userid> <username@domain> like this i had added two of my friends names to the location table , but i asked one of my friend to download xten softphone and make configure but i cannot see his registration request and also he tried to make call in xten to another person it is showing call not approved both of my friends are behind NAT , but i used mediaproxy to run along with ser mediaproxy.so module and in ser.cfg it also shows that mediaproxy is from /var/run/mediaproxysocket . there is socket really exists in /var/run. And my mediaproxy is running on ip:port 81.21.33.35:25060 and i dont know whats going wrong Can any body please help me in making test calls , using media proxy Thanks in advance. With regards, Ravi.

1 0

[Users] Fork and ENUM
by Andrew And 20 May '06

20 May '06

Could I do forking in Openser when I am usinging ENUM?

3 3

[Serusers] lookup-only for calling party in subscriber or alias-table
by Thorsten Müller 19 May '06

19 May '06

Hi all, is there a command in ser comparable to "lookup("<table>")" for the called party for the calling party? I would like to now if the calling party is already registered/known(alias-table) at my ser without lancing an authorization procedure with *_authorize("<realm>","<table>"). Thanks Thorsten ___________________________________________________________ Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de

2 1

[Serusers] Radius and Multiple INVITE-ACK
by Nhadie 19 May '06

19 May '06

Hi All, I'm having problem using on sql logging i'm having multiple INV - ACK for a single call, if i use radius accounting, would I still have the same problem? I mean at Radius it's Start and Stop, will it have a mutiple Start? TIA Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

1 0

[Serusers] Warining messages
by luke.2.pilgrim＠bt.com 19 May '06

19 May '06

Hi all, I recieve the following warning messages when loadinf up ser: WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx Is this something to worry about? Also I am able to connect to ser internally but not via it's external address. I have rtpproxy installed and I'm using the nathelper module. Not sure if they are configured correctly but they seem to be running. My client is behing NAT but my server is publically available. Does anyone have any ideas or could you tell me the best way to debug? for example can I moniter registration requests coming in? Regards, Luke.

2 1

[Users] /etc/init.d doesn't work
by Ty Manthey 19 May '06

19 May '06

I just did a removal of 0.9.5 and installed 1.0.1 for RH from RPM. My problem is that the /etc/init.d doesn't work. I get errors for lines 63, 69, 105 : -start-stop-daemon command not found. This is a debian command? Should this also work for RH? Docs also say sample /etc/init.d config file should be at /usr/local/src/openser-1.0.1/sip-server/etc/openser.init ,but /usr/local/src is empty. whereis openser only returns a config file and a folder with modules. I searched the internet but can't find a posting of a working script, just references to the script.

2 1

[Users] TCP <---> UDP Conversion
by T.R. Missner 19 May '06

19 May '06

Hello, Is it possible to use openSER as TCP <--> UDP convertor? I have this working to a certain extent. 1) UA -> TCP INV -> openSER -> UDP INV -> Carrier 2) UA <- TCP 200 <- openSER <- UDP 200 <- Carrier 3) UA -> TCP ACK -> openSER -> UDP ACK -> Carrier Setup transaction works like it should. My question is about subsequent transactions. In the 200 from Carrier (2) a parameter of transport=udp is set on the contact header. Now if the UA is running in an automatic protocol mode ( this would be UA specific ), It honors the transport=udp param and sends a BYE or re-Invite as UDP 4) UA -> UDP BYE -> openSER -> UDP BYE -> Carrier 5) UA <- UDP 200 <- openSER <- UDP 200 <- Carrier Is there a way to re-write the transport= param in the contact header of the 200 ( msg 2 ) so it says transport=tcp Which would then allow the subsequent request messages from UA to be sent tcp? Would doing this break the rfc? Is anyone using openSER to accomplish similar protocol conversion? Thanks, T.R. ________________________________ T.R. Missner Director Enterprise VoIP Products trmissner(a)bandwidth.com 919-439-3575 - Ph 925-888-2997 - Fax 4001 Weston Parkway Cary, NC 27513 ________________________________ CONFIDENTIALITY NOTICE This e-mail message, including any attachments from Bandwidth.com - contain information which is CONFIDENTIAL AND/OR LEGALLY PRIVILEGED. The information is intended only for the use of the individual named above and may not be disseminated to any other party without written permission. If you are not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, disclosure, distribution, copying or taking of any action in reliance on the contents of this e-mailed information is strictly prohibited. If you have received this transmission in error, please immediately notify info(a)bandwidth.com, and permanently delete this e-mail and the attachments hereto, if any, and destroy any printout thereof.

2 1

Re: [Serusers] Can't log the Invite
by AR. 19 May '06

19 May '06

Hello Help me please AR. ----- Original Message ----- From: AR. To: serusers(a)lists.iptel.org Sent: Wednesday, May 17, 2006 8:15 PM Subject: [Serusers] Can't log the Invite Dear all My ser+freeradius system does not log the INVITE message , I tried to listen the port 1813 that is radius accounting port, but there is no packet come here , when i call to someone. When i terminated the call , the BYE packet will come. Please help me to solve this promble See below for the ser.cfg . . . modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc","failed_transactions",1) modparam("acc","report_ack",0) modparam("acc","report_cancels",1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) . . . if (method=="INVITE" || method=="BYE" || method=="CANCEL") setflag(1); . . . AR.

1 0

RE: Réf. : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1)
by Vince Hoffman 19 May '06

19 May '06

Hmm no but maybe I did, I certainly compiled it from the 0.9.6 tarball from http://ftp.iptel.org/pub/ser/latest/src/ser-0.9.6_src.tar.gz But looking in my package info SIP-PROXY:/var/cache/apt/archives# apt-show-versions | grep ser- ser-cpl-module 0.9.5-0.1 installed: No available version in archive ser-acc-radius-module 0.9.5-0.1 installed: No available version in archive ser-jabber-module 0.9.5-0.1 installed: No available version in archive ser-radius-modules 0.9.5-0.1 installed: No available version in archive ser-postgres-module 0.9.5-0.1 installed: No available version in archive ser-acc-db-module 0.9.5-0.1 installed: No available version in archive ser-pa-module 0.9.5-0.1 installed: No available version in archive ser-mysql-module 0.9.5-0.1 installed: No available version in archive however serctl moni shows I am running Server: Sip EXpress router (0.9.6 (i386/linux)) So I'm guessing the Make deb target in the Makefile gives the wrong version info to the .deb files. I could be doing something stupid though, Has anyone else on the list come across this? Vince ------------------------------------- mnet Internet Limited Support Services Helpdesk: 0870 3335577 Fax: +44 (0)20 7324 3900 Email: support(a)mnet.co.uk Web: www.mnet.co.uk 132-140 Goswell Road London EC1V 7DY -----Original Message----- From: silvere.lapperriere(a)fr.schneider-electric.com [mailto:silvere.lapperriere@fr.schneider-electric.com] Sent: 19 May 2006 10:51 To: Vince Hoffman Subject: Réf. : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1) Thank you for your upload, but it seems, despite its name, that the mysql-module stands for 0.9.5-0.1 version of SER and NOT 0.9.6-0.1.... Did I miss something??? Thank you! "Vince Hoffman" <vhoffman(a)mnet.co Pour : Silvere Lapperriere/FR/Schneider@Europe, <serusers(a)lists.iptel.org> .uk> cc : Objet : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package 18/05/2006 18:58 NOTworking anymore (Debian 3.1) I was lazy and just recompiled the debian package (and added the mysql to the accounting modules Makefile) Make deb will do the job although I think I had to add a package or two for the compile to suceed. I can put the .deb from that somewhere if you like. Vince -----Original Message----- From: silvere.lapperriere(a)fr.schneider-electric.com [mailto:silvere.lapperriere@fr.schneider-electric.com] Sent: 18 May 2006 17:50 To: serusers(a)lists.iptel.org Subject: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1) Hi all! The ser-mysql-module_0.9.6-0.1_i386.deb package doesn't work since it depends on 'libmysqlclient15' Debian package which has recently been replaced by 'libmysqlclient15off'. Any ideas?!?? Thank you! _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers This message has been scanned for viruses by 3Labs - www.mnet.net.uk

1 0

[Serusers] How to implement Cluster with SER
by madhu.aravabhumi 19 May '06

19 May '06

Hi, If one SER server is down in the cluster another SER server should access the calls without interrupt. which cluster will be useful? regards, madhu.

1 0

[Serusers] script writer didn't release transaction
by AR. 19 May '06

19 May '06

Hi Does anyone know what the "script writer didn't release transaction" mean ? 9(31519) REGISTER message received 11(31523) REGISTER message received 10(31521) REGISTER message received 12(31525) REGISTER message received 10(31521) WARNING: script writer didn't release transaction thanks AR.

1 0

[Serusers] Error while parsing Contact body
by David 19 May '06

19 May '06

Hi, I seem to be seeing a lot of these in the logs. Just wondering if anyone knows of possible cause of these or if any documention exists to troubleshoot this error. ... ser[2876]: get_contact_uri: Error while parsing Contact body Thanks,

2 1

[Serusers] serctl, mysql and presence snapshot
by Paul Heijmann 19 May '06

19 May '06

Hi, I installed the presence snapshot (4.1) of SER but I have a problem that SERCTL doesn't work. It appears to be that the structure of the database has been changed. There seems to be a serctl in the package that I downloaded, but it seems to be the source, or part of that. I can't get it to work and I want to add some users to the database. Any ideas how to solve this? Kind regards, Paul Heijmann.

2 1

[Serusers] how to configure SER to serve MSN
by i4onion 19 May '06

19 May '06

If I dont use mysql,how can I configure ser to serve MSN

1 0

[Users] system busy - scenario
by unplug 19 May '06

19 May '06

I have experienced an error with using openser 1.0.1 + mediaproxy 1.4.2. The system works fine in the following loading. User login to the system: 20 hardware phones concurrent RTP session: 5 However, when I increase number of user to 50 and concurrent RTP session to 30. After a few minutes, the system is very unstable. SIP phones display "wait logon" message as they can't logon to the system in some reasons and no one can make call even some users can logon. This situation will remain few minutes and it will resume normal. After a while, system will become unstable again. Anyone has such experience before? I have grepped the log using ngrep but it is very difficult to troubleshoot as it is a log of whole system with 50 users. In my simple analyst, I found that the most error replies happened in the log are listed below. 407 - proxy authentication required 408 - request timeout 481 - call leg transaction does not exit Do above errors will make the system unstable? Which one is the most critical? When and how the above errors will occur? To repeat the situation above, it involves a lot of resources. Is there any sip phone simulator which can be used to simulate as a large number of user to create calls simultaneously? Thanks!!

3 3

[Serusers] Can SER forward the call to another phone on busy or no answer
by AR. 18 May '06

18 May '06

Dear ALL Can SER forward the call to another phone on busy or no answer ? and How to do that ? Which module should be used ? thanks AR.

3 4

RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1)
by Vince Hoffman 18 May '06

18 May '06

I was lazy and just recompiled the debian package (and added the mysql to the accounting modules Makefile) Make deb will do the job although I think I had to add a package or two for the compile to suceed. I can put the .deb from that somewhere if you like. Vince -----Original Message----- From: silvere.lapperriere(a)fr.schneider-electric.com [mailto:silvere.lapperriere@fr.schneider-electric.com] Sent: 18 May 2006 17:50 To: serusers(a)lists.iptel.org Subject: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1) Hi all! The ser-mysql-module_0.9.6-0.1_i386.deb package doesn't work since it depends on 'libmysqlclient15' Debian package which has recently been replaced by 'libmysqlclient15off'. Any ideas?!?? Thank you! _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers This message has been scanned for viruses by 3Labs - www.mnet.net.uk

1 0

[Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1)
by silvere.lapperriere＠fr.schneider-electric.com 18 May '06

18 May '06

Hi all! The ser-mysql-module_0.9.6-0.1_i386.deb package doesn't work since it depends on 'libmysqlclient15' Debian package which has recently been replaced by 'libmysqlclient15off'. Any ideas?!?? Thank you!

1 0

[Serusers] SER Going down Frequently
by ram 18 May '06

18 May '06

Hi all does any one have Idea 0.814 version frequently going down, is that a bug Since i talk to some one they says due to misconfiguration of Phone, the Ser going down is that true ? can some one coment ram

1 0

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 18 May '06

18 May '06

Hi Aaron, Thanks for your effort to help me, but; First link didn't help because I don't have fixed port range configured. Second link doesn't have any information on how to make SIP account option appear. :( Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Thursday, May 18, 2006 5:27 PM To: İlker Aktuna (Koç.net); samuel Cc: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://support.microsoft.com/default.aspx?scid=kb;en-us;830550&FR=1&PA=1&SD… here's a microsoft article that speaks of a scenario where something causes the sip accounts option to disappear and how to fix it ....if the one above doesn't work here's something else i found.... http://www2.slac.stanford.edu/comp/messaging/Installing/instant_messaging_s… i wonder if this will help. also it shows entering a password at some point in these pictures. i'm not sure about how to authenticate the wm client with a sip proxy ________________________________ From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] Sent: Thu 5/18/2006 3:57 AM To: Gould, Aaron; samuel Cc: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, I am not using MSN messenger. I am trying with the same version as Samuel. But on my PC "sip accounts" option does not show up. Anyway, I think it doesn't support authorization, does it ? Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Wednesday, May 17, 2006 9:05 PM To: samuel; Ilker Aktuna (Koç.net) Cc: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.thaitel.com/msn2phone/wm_mm.php i wonder if this has something to do with it? ________________________________ From: samuel [mailto:samu60@gmail.com] Sent: Wed 5/17/2006 9:51 AM To: Ilker Aktuna (Koç. net) Cc: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org Subject: Re: [Serusers] Which IM client Sometimes micro$oft messenger does not uninstal as expected...did you completely remove all previous micro$ messenger staff before installing 5.1 version??? Success, Samuel. 2006/5/17, Ilker Aktuna (Koç. net) <ilkera(a)koc.net>: > > > > > So, it's the same version. But I don't get the SIP option in the > accounts settings. > Why could that be ? > On which Windows version do you use that ? I use XP Pro. > Do you have any idea why that option does not show up on my messenger ? > > Thanks, > ilker > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Wednesday, May 17, 2006 3:22 PM > > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > i use Version 5.1 (5.1.0701) > > ________________________________ > > From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] > Sent: Tue 5/16/2006 11:58 PM > To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Hi, > > Thanks for the reply. > I downloaded Windows messenger 5.1 (5.1.0701) from the link you sent. > Unfortunately I don't see "SIP Communications Service Account" in the > Accounts window. > Only 2 options (.NET Passport Account and Exchange Account) What > version do you use ? > > Thanks, > ilker > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Tuesday, May 16, 2006 6:03 PM > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > click.... > > Tools > Options > Accounts > * You should see mid-way down the check box for SIP Communications > Service Account. Check that. and type in the sip (aor) name that you > want to register into the ser (sip registrar) with. i didn't preceed it with sip: > i only typed xyz(a)domain.com > * then i clicked "advanced" and checked "configure settings" and put > in my hostname of the ser box.....ser.domain.com.......and then > checked "udp" > > that's it > > ________________________________ > > From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] > Sent: Tue 5/16/2006 7:46 AM > To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Thanks. > How do you connect to a SIP server with Windows Messenger 5.1 ? > It only allows me to connect to Passport. > > > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Tuesday, May 16, 2006 4:47 PM > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c > -4b9a-940f-9157a3b3d774&DisplayLang=en > > click the "continue" button > > ________________________________ > > From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) > Sent: Tue 5/16/2006 6:42 AM > To: Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Hi, > > Where can I find Windows Messenger 5.1 ? > > Thanks, > ilker > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar > Sent: Tuesday, May 16, 2006 3:32 PM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Which IM client > > Hi, > a) Can any one suggest a free IM client that I can use to test > SIP+SIMPLE using the ser + presence ? > > I tried with windows messenger 5.1, but it does not seems to be > working with the ser + presence server configuration that I used the > latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). > > b) Also, can any one suggest a working sample config for presence > (without using the database)? > > Any suggestions on this is highly appreciated. > > Regards, > Suraj > > > > <http://387555.sigclick.mailinfo.com/sigclick/03090604/05074502/09004D03/401…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://387555.sigclick.mailinfo.com/sigclick/0B090007/05044F06/09024B00/181…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Mediaproxy
by Richard C. Thompson 18 May '06

18 May '06

Hi All I have an snmp script that calls mediaproxy's python program called sessions.py and should return the number of active calls in the mediaproxy server. The script works when I call it from a ssh session but it returns "Cannot connect to RTP proxy control port" when I run it from the snmp agent. I've tried all the sessions.py "options" and nothing works. Mediaproxy version is 1.4.2 Does anyone have any ideas. BTW the script works fine on an older version of mediaproxy on another machine works. Version 1.2.1 Thanks RT

1 0

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 18 May '06

18 May '06

Hi, I am not using MSN messenger. I am trying with the same version as Samuel. But on my PC "sip accounts" option does not show up. Anyway, I think it doesn't support authorization, does it ? Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Wednesday, May 17, 2006 9:05 PM To: samuel; İlker Aktuna (Koç.net) Cc: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.thaitel.com/msn2phone/wm_mm.php i wonder if this has something to do with it? ________________________________ From: samuel [mailto:samu60@gmail.com] Sent: Wed 5/17/2006 9:51 AM To: Ilker Aktuna (Koç. net) Cc: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org Subject: Re: [Serusers] Which IM client Sometimes micro$oft messenger does not uninstal as expected...did you completely remove all previous micro$ messenger staff before installing 5.1 version??? Success, Samuel. 2006/5/17, Ilker Aktuna (Koç. net) <ilkera(a)koc.net>: > > > > > So, it's the same version. But I don't get the SIP option in the > accounts settings. > Why could that be ? > On which Windows version do you use that ? I use XP Pro. > Do you have any idea why that option does not show up on my messenger ? > > Thanks, > ilker > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Wednesday, May 17, 2006 3:22 PM > > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > i use Version 5.1 (5.1.0701) > > ________________________________ > > From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] > Sent: Tue 5/16/2006 11:58 PM > To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Hi, > > Thanks for the reply. > I downloaded Windows messenger 5.1 (5.1.0701) from the link you sent. > Unfortunately I don't see "SIP Communications Service Account" in the > Accounts window. > Only 2 options (.NET Passport Account and Exchange Account) What > version do you use ? > > Thanks, > ilker > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Tuesday, May 16, 2006 6:03 PM > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > click.... > > Tools > Options > Accounts > * You should see mid-way down the check box for SIP Communications > Service Account. Check that. and type in the sip (aor) name that you > want to register into the ser (sip registrar) with. i didn't preceed it with sip: > i only typed xyz(a)domain.com > * then i clicked "advanced" and checked "configure settings" and put > in my hostname of the ser box.....ser.domain.com.......and then > checked "udp" > > that's it > > ________________________________ > > From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] > Sent: Tue 5/16/2006 7:46 AM > To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Thanks. > How do you connect to a SIP server with Windows Messenger 5.1 ? > It only allows me to connect to Passport. > > > > -----Original Message----- > From: Gould, Aaron [mailto:aaron.gould@ngc.com] > Sent: Tuesday, May 16, 2006 4:47 PM > To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c > -4b9a-940f-9157a3b3d774&DisplayLang=en > > click the "continue" button > > ________________________________ > > From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) > Sent: Tue 5/16/2006 6:42 AM > To: Suraj Kumar; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Which IM client > > > > Hi, > > Where can I find Windows Messenger 5.1 ? > > Thanks, > ilker > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar > Sent: Tuesday, May 16, 2006 3:32 PM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Which IM client > > Hi, > a) Can any one suggest a free IM client that I can use to test > SIP+SIMPLE using the ser + presence ? > > I tried with windows messenger 5.1, but it does not seems to be > working with the ser + presence server configuration that I used the > latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). > > b) Also, can any one suggest a working sample config for presence > (without using the database)? > > Any suggestions on this is highly appreciated. > > Regards, > Suraj > > > > <http://387555.sigclick.mailinfo.com/sigclick/03090604/05074502/09004D03/401…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] problem with ser and mediaproxy when multiple media descriptions exist and client is natted
by Gerd Feiner 18 May '06

18 May '06

hi there we got a weird problem on our ser when dealing with multiple media descriptions in SDP packets: the INVITE comes from a SIP-enabled TDM-switch and looks like that (notice 3(!) different media descriptions, but pointing to the same port): (just media-descriptions shown for brevity): Media Description, name and address (m): audio 17728 RTP/ AVP 0 8 4 18 2 101 Media Attribute (a): fmtp:101 0-15 Media Attribute (a): rtpmap:101 telephone-event/8000 Media Description, name and address (m): audio 17728 RTP/ AVP 97 Media Attribute (a): rtpmap:97 /8000 Media Attribute (a): sendonly Media Description, name and address (m): audio 17728 RTP/ AVP 97 Media Attribute (a): rtpmap:97 /8000 Media Attribute (a): recvonly when the SER receives this packet it looks up the client (b-number) and recognizes it is behind a NAT - so mediaproxy stuff is done (notice SER/mediaproxy generating 3(!) different(!) ports for the media-descriptions): (same brevity here): Media Description, name and address (m): audio 16014 RTP/ AVP 0 8 4 18 2 101 Media Attribute (a): fmtp:101 0-15 Media Attribute (a): rtpmap:101 telephone-event/8000 Media Description, name and address (m): audio 16016 RTP/ AVP 97 Media Attribute (a): rtpmap:97 /8000 Media Attribute (a): sendonly Media Description, name and address (m): audio 16018 RTP/ AVP 97 Media Attribute (a): rtpmap:97 /8000 Media Attribute (a): recvonly the client (a sipura 2100/1001) now sends media to the last specified port (16018 in our case) while the audio from the switch goes to 16014 - resulting in mediaproxy not being able to connect the two of them ... and we sit there with neither in- nor outbound audio ... how do i get mediaproxy/SER to send only one port to the client, just like the switch initially did? any clues? mit freundlichen Grüßen / with best regards Gerd Feiner Leitung IP-Dienste Kabelfernsehen München ServiCenter GmbH & Co. KG Abt. Mediaport Medienallee 24 85774 Unterföhring T: +49 89 95083 243 F: +49 89 95083 132 E: g.feiner(a)cablesurf.de W: www.cablesurf.de

1 0

FW: [Serusers] Can SER forward the call to another phone on busy or noanswer
by Richard C. Thompson 18 May '06

18 May '06

You use the failure_route[1] to do this Use the Invite timer =0 to detect no answer and t_check_status ("487") to detect a busy then rewrite to change uri and append_branch() to forward the call RT _____ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of AR. Sent: Thursday, May 18, 2006 9:02 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Can SER forward the call to another phone on busy or noanswer Dear ALL Can SER forward the call to another phone on busy or no answer ? and How to do that ? Which module should be used ? thanks AR.

1 0

[Users] BYE then Forbidden
by unplug 18 May '06

18 May '06

Why a forbidden will be issued from openser after it receiving a BYE message? UA openser |>F21 BYE --------------------------------------->| |<----------------------------- Forbidden 403 F22<| SIP MESSAGE 21 210.184.23.31:5060() -> 203.193.26.234:5060() UDP Frame 22 18/May/06 17:15:33.7124 TimeFromPreviousSipFrame=3.2197 TimeFromStart=18.3328 BYE sip:936418567@203.193.26.242:5060 SIP/2.0 Via: SIP/2.0/UDP 10.0.0.27:5060;branch=z9hG4bK-1-10 From: sipp <sip:871963472069@10.0.0.27:5060>;tag=1 To: sut <sip:36418587@203.193.26.234:5060>;tag=SIPaPOFVaXMKm7Q3 Call-ID: 1-2419(a)10.0.0.27 CSeq: 2 BYE Contact: sip:871963472069@10.0.0.27:5060 Max-Forwards: 70 Subject: Performance Test Content-Length: 0 SIP MESSAGE 22 203.193.26.234:5060() -> 210.184.23.31:5060() UDP Frame 23 18/May/06 17:15:33.7181 TimeFromPreviousSipFrame=0.0058 TimeFromStart=18.3386 SIP/2.0 403 Forbidden Via: SIP/2.0/UDP 10.0.0.27:5060;branch=z9hG4bK-1-10;rport=5060;received=210.184.23.31 From: sipp <sip:871963472069@10.0.0.27:5060>;tag=1 To: sut <sip:36418587@203.193.26.234:5060>;tag=SIPaPOFVaXMKm7Q3 Call-ID: 1-2419(a)10.0.0.27 CSeq: 2 BYE Server: OpenSer (1.0.1 (i386/linux)) Content-Length: 0 Warning: 392 203.193.26.234:5060 "Noisy feedback tells: pid=23798 req_src_ip=210.184.23.31 req_src_port=5060 in_uri=sip:936418587@203.193.26.242:5060 out_uri=sip:936418587@203.193.26.242:5060 via_cnt==1"

3 2

[Users] How make the conference in softphones
by raviprakash sunkara 18 May '06

18 May '06

Hello EveryBody , I need help from U. please help me in How make a conference in softphones. On Which modules have work. I recently install tested the softphones . that a calls are made . And When I looked into Location table . in that table records are insert. immediately when the system restart or when softphone is discarded the " location table " records are disable. Please help me in that.. And please Excuse me, In my English . Bye -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

1 0

[Users] 401 Unauthorized
by Joao Pereira 18 May '06

18 May '06

Hello to all Im trying to register SIP clients (Cisco IP phone and Planet VIP )that are located behind an ADSL line ( and behind NAT), and the first time they register, they receive the OK from OpenSER, but when I reboot the phone, they cant connect again. They receive "401 Unauthorized" from OpenSER. OpenSER isnt returning "401 Unauthorized" in any part of openser.cfg Im not using firewall. Can the problem be in the type of NAT? Can someone help me? Thanks Joao Pereira

7 11

[Serusers] How to get cdr?
by hlzhangxt 18 May '06

18 May '06

I establish a ser system to serve sip teminals. But I can not ge the CDR to bill. Can somebody help me how to get the CDR?

1 0

[Serusers] MediaProxy multiple interface probelms
by rusl 18 May '06

18 May '06

Hi, I'm having a problem with mediaproxy. I'm trying to proxy through from the internet to a SIP switch which is on a private network. I have a machine that has connectivity to both the internet and the private network, but as the request comes in on the public interface, if you issue a use_media_proxy(); it changes the "c=IN IP4" header from the initial INVITE from the SIP client to the external address of SER instead of the internal one, which means that the SIP switch's RTP packets can never reach the mediaproxy, as the switch doesn't have a valid route to the internet. I can establish a call, but obviously the SIP sends it's RTP packets to the external address so they never get there. Also, I noticed that the SDP that the client receives also contains the private addresses of the cirpack switch. Could someone give me some tips on what the best way to "bridge" two separate networks with mediaproxy is? JPF

1 0

[Serusers] VM Module
by ram 18 May '06

18 May '06

Hi all Iam installing latest 0.96 SER i dont see VM module in it where can i get this modules ram

2 1

[Serusers] VM module compile problem
by ram 18 May '06

18 May '06

Hi I have problem when iam compiling make[1]: Entering directory `/root/all/ser-0.9.7-pre1/modules/vm' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -ftree-vectorize -mtune=opteron -DNAME='"ser"' -DVERSION='"0.9.7-pre1"' -DARCH='"x86_64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.0"' -D__CPU_x86_64 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -c vm.c -o vm.o vm.c: In function âvm_mod_initâ: vm.c:154: error: too few arguments to function âbind_dbmodâ vm.c: In function âvm_init_childâ: vm.c:166: error: âdb_initâ undeclared (first use in this function) vm.c:166: error: (Each undeclared identifier is reported only once vm.c:166: error: for each function it appears in.) vm.c:168: warning: implicit declaration of function âdb_initâ vm.c:168: warning: assignment makes pointer from integer without a cast vm.c: In function âvm_get_user_infoâ: vm.c:204: warning: implicit declaration of function âdb_use_tableâ vm.c:205: error: âdb_queryâ undeclared (first use in this function) vm.c:218: error: âdb_free_queryâ undeclared (first use in this function) make[1]: *** [vm.o] Error 1 make[1]: Leaving directory `/root/all/ser-0.9.7-pre1/modules/vm'

1 0

[Users] OpenSER and Eyebeam 1.5 with TLS
by Teemu Harju 18 May '06

18 May '06

Hi, I've been trying to get OpenSER to work with Eyebeam 1.5 using TLS, but I always get a certificate error. I've created certificates using "gen_rootCA.sh" and "gen_usercert.sh" scripts. Which of these certificates I should store to the machine running the eyebeam client? Eyebeam requires the certificate to be stored to the computers "root certificate store". This is what the user manual says... "When using TLS, you must have the root certificate that signs the proxy's chain of certificates. The certificates must be stored on the eyeBeam computer, in the root certificate store." I think I've figured out how to import a new certificate to Windows XP, but by default it does not support .pem files. I've changed the extension to .crt since that is what Windows recognises, but this doesn't seem to help. Somehow the certificate just does not appear to the root certificate store. What certificate I should put to the client machine? Do I also need to use the private key generated by "gen_usercert.sh" for something on the client side? BR, Teemu -- Teemu Harju http://www.teemuharju.net

3 8

[Serusers] New MySQL results in aborted connections from SER
by Stephen Helfen 18 May '06

18 May '06

I was able to get ser (0.9.6) running with mysql 4.1.16, but upon upgrading to mysql 5.0.21, I am having problems again. MySQL loads fine, as does SER, but when my UA attempts to register with the database, I see these errors throughout my mysql log: [Warning] Aborted connection 109 to db: 'nv_proxy' user: 'nvproxy' host: 'localhost' (Got an error reading communication packets) If I try to make a call, I get a 407 Proxy Authentication Required failure, which I expect. There are no errors in /var/log/messages that indicate what exactly the problem is with my database access, so ser seems to think things are okay. Has anyone seen this before or have any idea what I might have missed in my upgrade from 4.1.16 to 5.0.21 MySQL? Thanks in advance, Steve

3 3

[Serusers] Problem with many users
by VOIP SUPPORT 17 May '06

17 May '06

HI, I am using software ser 0.9.6 on Slackware with an external MySQL database. Someone can say me if it is possible to share the sip traffic on more SPS? How? Thanks, Luca

1 0

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 17 May '06

17 May '06

So, it's the same version. But I don't get the SIP option in the accounts settings. Why could that be ? On which Windows version do you use that ? I use XP Pro. Do you have any idea why that option does not show up on my messenger ? Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Wednesday, May 17, 2006 3:22 PM To: İlker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client i use Version 5.1 (5.1.0701) ________________________________ From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] Sent: Tue 5/16/2006 11:58 PM To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, Thanks for the reply. I downloaded Windows messenger 5.1 (5.1.0701) from the link you sent. Unfortunately I don't see "SIP Communications Service Account" in the Accounts window. Only 2 options (.NET Passport Account and Exchange Account) What version do you use ? Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 6:03 PM To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client click.... Tools Options Accounts * You should see mid-way down the check box for SIP Communications Service Account. Check that. and type in the sip (aor) name that you want to register into the ser (sip registrar) with. i didn't preceed it with sip: i only typed xyz(a)domain.com * then i clicked "advanced" and checked "configure settings" and put in my hostname of the ser box.....ser.domain.com.......and then checked "udp" that's it ________________________________ From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] Sent: Tue 5/16/2006 7:46 AM To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Thanks. How do you connect to a SIP server with Windows Messenger 5.1 ? It only allows me to connect to Passport. -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 4:47 PM To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c-4b9a… click the "continue" button ________________________________ From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) Sent: Tue 5/16/2006 6:42 AM To: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, Where can I find Windows Messenger 5.1 ? Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar Sent: Tuesday, May 16, 2006 3:32 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Which IM client Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj <http://387555.sigclick.mailinfo.com/sigclick/020E0406/04034E0F/07064F01/916…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://387555.sigclick.mailinfo.com/sigclick/03080404/06044B07/07024F03/100…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

3 2

[Users] how to build RPM packages
by Klaus Darilion 17 May '06

17 May '06

Hi! I'm used to debian, thus all I ever did was "make deb". But as there are lots of spec files for rpm based distros in packaging/rpm: How do I build RPM packages? Thanks Klaus

2 1

[Users] Help with SER and B2BUA
by Marco Meinardi 17 May '06

17 May '06

Dear Guys, I still need help designing my SER architecture. I have to implement prepaid system with customized billing methods and I have been advised to use Asterisk B2BUA. SER and Asterisk will handle signalling, Mediaproxy will handle ALL RTP streams. UAc ---> SER: Auth, Loc ---> Asterisk B2BUA ---> UAs |_____________________________| Mediaproxy I want to keep SER as my central SIP proxy performing user registration, authentication and location, using Asterisk only for terminating ongoigng calls after the credit is over. An external perl application will calculate the time that the call should last, according to remaning credit, Asterisk will decrement this time counter and terminate the call when it reaches to 0. Subtracting credit will be done in post-processing reading SER acc table. Please advise me, by telling me if this is the correct approach and if it possible to implement. Thanks in advance once again. Regards, -- Marco Meinardi <m.meinardi(a)reteitaly.com> ReteItaly S.r.l. www.reteitaly.com _____________________________________________ C.so Svizzera, 185 - 10149 Torino - Italy Tel. +39 011 7767694 - Mobile +39 335 7878604 Fax +39 011 746179 _____________________________________________

2 1

Fwd: [Serusers] Detecting Lost IAD Registration
by Ali Zaidi 17 May '06

17 May '06

---------- Forwarded message ---------- From: Ali Zaidi <aligzaidi(a)gmail.com> Date: May 17, 2006 11:30 AM Subject: Re: [Serusers] Detecting Lost IAD Registration To: David <david(a)lolling.org> David, You said this problem is not wide spread and SER is responding well to other UAs, so what i think problem is not with SER, it is UA who is acting weird. Thanks, Ali. On 5/17/06, David <david(a)lolling.org> wrote: > > Thanks for the reply. > > We deploy the proxy at the edge of our ICO's networks. > We are using RTP proxying to deal with the NAT issues > and that has been successful. > > This particular company is running IP over their ATM which > we suspect may be the root of the problem but I am at the > very beginning stages of troubleshooting. This is not a wide > spread problem with them and it is one we cannot reproduce > in our lab. > > For now, I am trying to find a way to monitor the proxy at > the ICO to catch lost registrations so I can possible corelate > it with other system events on their network. > > We have seen this problem with Grandstream and Mediatrix IAD's. > > We do not have access to their network internals so we have to > look elsewhere. > > Thanks, > > Dave > > --------- Original Message -------- > From: Ali Zaidi <aligzaidi(a)gmail.com> > To: David <david(a)lolling.org> > Subject: Re: [Serusers] Detecting Lost IAD Registration > Date: 17/05/06 10:02 > > > David, > >   > > It is hard to say, unless we know your implementation or layout of your > IP > network. > > Are you using SER with any NAT traversal solution such as RTPProxy or > Mediaproxy? > > Is your UA are behind NAT? > > is anything change since you took charge or UA always loosing > connections > and now you there to fix this existing problem? > > Personally i never see UA looses any registration once > you configure > SER in proper way. Yes, i do have these problems with Asterisk once in a > while. > > Is there any Firewall in midle of UA and SER? > >   > > by the way what is IAD? > >   > > Thanks Ali... > >   > >   > > On 5/17/06, David <david(a)lolling.org> wrote: > > Hello,I am new to using and managing SER server.  Mycompany > has > a large scale implementation of SER > > and we have been having problems with end usersloosing registration on > our > SER server and insome cases the IAD's will not re-register unlessyou > reboot > the IAD.As I am very new to this and have been thrown in > > head first, I thought I would ask on this list.For trouble shooting > purposes, I was wondering ifthere is a way to automatically detect when an > IADlooses registration and then have it fire off anemail? > > Thanks,David_______________________________________________Serusers > mailing listserusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

2 2

Fwd: [Serusers] Detecting Lost IAD Registration
by Ali Zaidi 17 May '06

17 May '06

---------- Forwarded message ---------- From: Ali Zaidi <aligzaidi(a)gmail.com> Date: May 17, 2006 11:02 AM Subject: Re: [Serusers] Detecting Lost IAD Registration To: David <david(a)lolling.org> David, It is hard to say, unless we know your implementation or layout of your IP network. Are you using SER with any NAT traversal solution such as RTPProxy or Mediaproxy? Is your UA are behind NAT? is anything change since you took charge or UA always loosing connections and now you there to fix this existing problem? Personally i never see UA looses any registration once you configure SER in proper way. Yes, i do have these problems with Asterisk once in a while. Is there any Firewall in midle of UA and SER? by the way what is IAD? Thanks Ali... On 5/17/06, David <david(a)lolling.org> wrote: > > Hello, > > I am new to using and managing SER server. My > company has a large scale implementation of SER > and we have been having problems with end users > loosing registration on our SER server and in > some cases the IAD's will not re-register unless > you reboot the IAD. > > As I am very new to this and have been thrown in > head first, I thought I would ask on this list. > > For trouble shooting purposes, I was wondering if > there is a way to automatically detect when an IAD > looses registration and then have it fire off an > email? > > Thanks, > > David > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: [Serusers] serweb : error Undefined class name 'errorhandler' in application_layer/page_co
by Karel Kozlik 17 May '06

17 May '06

Latest tarball is here ftp://ftp.iptel.org/pub/serweb/serweb-0.9.4.tar.gz And RPM package is here: http://yum.sip-router.org/fedora-4/main/binary-i386/serweb-0.9.3-0.i386.rpm but it is for fedora. I do not know if will work in suse... Karel Americania .it napsal(a): > Yes I 've ser 0.9.4 from rpm for Suse and serweb from Berilios but > didn't work (errorhandler non defined ) : so I got serweb from CVS and > mixed it up ! :-( > > Where can I get the last working serweb for ser 0.9.4 (package or tarbal > ) ? > > Thanks > >> From: Karel Kozlik <karel(a)iptel.org> >> To: "Americania .it" <americania(a)hotmail.com> >> CC: serusers(a)lists.iptel.org >> Subject: Re: [Serusers] serweb : error Undefined class name >> 'errorhandler' in application_layer/page_co >> Date: Wed, 17 May 2006 08:33:05 +0200 >> >> where you get the sources? You have to have a mix of new and an old >> files. If you are useing ser 0.9.x you should install serweb-0.9.4 >> from tarbal or package. If you have ser from cvs, try reinstall serweb >> from cvs. >> >> Karel >> >> Americania .it napsal(a): >>> I'm trying to install serweb on Linux Suse 10 with apache2 , php , >>> PEAR , PECL Runkit installed but when I call the page >>> >>> http://host_name/serweb/user/index.php >>> >>> I get the following error : >>> >>> Fatal error: Undefined class name 'errorhandler' in >>> /srv/www/htdocs/serweb/application_layer/page_controler.php on line 102 >>> >>> What can I do ? >>> >>> I've got crazy trying to understand what is wrong ...! >>> >>> >>> >>> Thanks >>> >>> >>> _______________________________________________ >>> Serusers mailing list >>> serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] Call transfer, ser not send BYE after REFER
by Murděj Ukrutný 17 May '06

17 May '06

Hello, i have problem with call transfer. I try A call to B, B receive call, B transfer A to B truncate ngrep port 5060: INVITE B From: A To: B REFER A From: B To: A Refer-To: C Referred-by: B INVITE C From: A To: C Problem: ser not send BYE after REFER My ser.cfg: debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #mhomed=yes listen=195.137.182.11 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/group.so" #loadmodule "SER_MODULES_DIR/acc.so" loadmodule "/usr/lib/ser/modules/acc_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth", "nonce_expire", 300) modparam("auth", "rpid_prefix", "<sip:") modparam("auth", "rpid_suffix", "@GW_IP_3>;party=calling;id-type=subscriber;screen=yes;privacy=off") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # !! Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # Acc modparam("acc", "report_ack", 1) modparam("acc", "log_level", 1) modparam("acc", "failed_transactions", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 3) modparam("acc", "log_fmt", "fisum") # Nemelo by se to objevit v logu #modparam("acc", "log_flag", FLAG_ACC) #modparam("acc", "log_missed_flag", FLAG_MISSED) # Nastaveni spojeni k Mysql pro moduly modparam("group|usrloc|uri_db|acc", "db_url", "mysql://ser:ser@localhost/ser") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # Do acc se zapisuji vsechny nasledujici pozadavky if (method == "INVITE" || method == "CANCEL" || method == "BYE" || method == "ACK") { setflag(2); }; # Uprava hlavicky Server remove_hf("Server"); append_hf("Server: EMEA Telecom IBM S2 SIP Server\r\n"); # !! Nathelper # Special handling for NATed clients; first, NAT test is executed: it looks for via!=received and RFC1918 addresses in Contact (may fail if line-folding is used); also, the received test should, if completed, should check all vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!(method=="REGISTER")) record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; # account all BYEs if (method=="BYE") setflag(2); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Kontrola prihlaseni podle tabulky subscribler if (!www_authorize("sip.ahoj.cz", "subscriber")) { www_challenge("sip.ahoj.cz", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { if (does_uri_exist()) { # Existuje na serveru ale neni online sl_send_reply("404", "Not Found"); break; } else { # neni na tomto serveru, pujde do pstn, nebude se pouzivat rtpproxy resetflag(6); setflag(1); }; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); append_hf("X-rtpproxy: yes\r\n"); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP route(2); } route[2] { if ((method == "INVITE") && (uri =~ "sip:S302_")) { sl_send_reply("302", "Rewrited"); break; }; if (method == "INVITE") { if (src_ip == "xxx.xxx.xxx.xxx") { setflag(4); append_hf("X-s2router-source: gateway-pstn\r\n"); log("LOG: From PSTN\n"); }; if (!is_user_in("Request-URI", "free-pstn")) { if (!isflagset(4) && !proxy_authorize("DIGEST_REALM", "subscriber")) { proxy_challenge("DIGEST_REALM", "0"); break; }; # let's check from=id ... avoids accounting confusion if (!isflagset(4) && !check_from()) { log("LOG: From Cheating attempt\n"); sl_send_reply("403", "That is ugly -- use From=id next time (gw)"); break; }; }; }; # Pokud neni cislo registrovane na serveru zkus pstn if (isflagset(1)) { # Vola jen na cisla if (uri =~ "^[a-zA-Z]+:[0-9]+@") { route(4); } else { sl_send_reply("604", "Does Not Exist Anywhere"); }; break; }; route(3); } route[4] { log(1, "Jedu pres PSTN"); if (!(method == "INVITE" || method == "ACK" || method == "CANCEL" || method == "OPTIONS" || method == "BYE")) { sl_send_reply("500", "only VoIP methods accepted for GW"); break; }; rewritehostport("195.122.201.61:5060"); # Acc setflag(2); route(3); } route[3] { if (!t_relay()) { sl_reply_error(); }; break; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } Any idea? Thank -- Murdej Ukrutny

1 0

[Users] new major release roadmap
by Daniel-Constantin Mierla 17 May '06

17 May '06

Hello, as you could deduced from last mails, preparation for a new major release started. The problems in the past weeks with the CVS delayed the start. Initial plan was to freeze the CVS last week and go in testing phase (it will be announced very soon, once the all developers will be aware). The target is to release the new version 1.1.0 at mid of June (one year since OpenSER started). We will do the best to stick to that date, although it might be postponed for a bit, if the testing phase does not go smooth. There were a lot of new features and improvements added to the development branch. Delaying a new release will make hard the migration to it. In this testing phase we will integrate most of the patches posted on the tracker, with special care to TLS (thanks to Klaus for his contribution). Also, the modules will be reviewed to be aligned to new syntaxes and internals of the core. Just to list some of the new stuff: - statistics support in core - NAPTR support - direct access to pseudo-variables via avpops - new modules: dialog, osp, path, siptrace, statistics, unixodbc - lot of new features in: avpops, enum, rr, tm, msilo, pdt, nathelper, group, dispatcher, textops ... modules To ease the migration, I have started a dokuwiki page to collect the changes and upgrade steps: http://openser.org/dokuwiki/doku.php?id=migrating_openser_v1.0.x_to_v1.1.x Hope some of you will contribute there. Testing development branch and feedback will be very appreciated. Cheers, Daniel

3 3

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 17 May '06

17 May '06

Hi, Thanks for the reply. I downloaded Windows messenger 5.1 (5.1.0701) from the link you sent. Unfortunately I don't see "SIP Communications Service Account" in the Accounts window. Only 2 options (.NET Passport Account and Exchange Account) What version do you use ? Thanks, ilker -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 6:03 PM To: İlker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client click.... Tools Options Accounts * You should see mid-way down the check box for SIP Communications Service Account. Check that. and type in the sip (aor) name that you want to register into the ser (sip registrar) with. i didn't preceed it with sip: i only typed xyz(a)domain.com * then i clicked "advanced" and checked "configure settings" and put in my hostname of the ser box.....ser.domain.com.......and then checked "udp" that's it ________________________________ From: Ilker Aktuna (Koç.net) [mailto:ilkera@koc.net] Sent: Tue 5/16/2006 7:46 AM To: Gould, Aaron; Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Thanks. How do you connect to a SIP server with Windows Messenger 5.1 ? It only allows me to connect to Passport. -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 4:47 PM To: Ilker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c-4b9a… click the "continue" button ________________________________ From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) Sent: Tue 5/16/2006 6:42 AM To: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, Where can I find Windows Messenger 5.1 ? Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar Sent: Tuesday, May 16, 2006 3:32 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Which IM client Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj <http://387555.sigclick.mailinfo.com/sigclick/020E0406/04034E0F/07064F01/916…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Can't log the Invite
by AR. 17 May '06

17 May '06

Dear all My ser+freeradius system does not log the INVITE message , I tried to listen the port 1813 that is radius accounting port, but there is no packet come here , when i call to someone. When i terminated the call , the BYE packet will come. Please help me to solve this promble See below for the ser.cfg . . . modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc","failed_transactions",1) modparam("acc","report_ack",0) modparam("acc","report_cancels",1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) . . . if (method=="INVITE" || method=="BYE" || method=="CANCEL") setflag(1); . . . AR.

1 0

[Serusers] serweb CTD and IM problem! Heeeelp!
by Andrey Kouprianov 17 May '06

17 May '06

Hi, I posting for the fourth time on the row!!!! Can ANYONE answer me please! I have installed serweb 0.9.4, ser 0.9.6, php4 with all the supports needed, pear with DB support, apache 1.3, mysql 1.3.34. Did i miss anything? Oh, pear Log is also installed. Everything is working fine EXCEPT that i cannot send IM from serweb as well as I cannot CTD from serweb. They both reply with "503 Service Unavlailable" or sometimes its 408 Timeout. There's no documentation or threads in the mailing list on this topic, so i cannot look up what is wrong. All available documentation is obsolete. SIP clients I use are eyeBeams, so they both support REFER and MESSAGE methods. Here's /var/log/message log after trying to CTD (both clients are registered!): May 17 16:06:35 sip /usr/local/sbin/ser[47471]: ERROR: udp_send: sendto(sock,0x284be0d0,546,0,0x284bd4f8,16): Host is down(64) May 17 16:06:35 sip /usr/local/sbin/ser[47471]: msg_send: ERROR: udp_send failed May 17 16:06:35 sip /usr/local/sbin/ser[47471]: Warning: run_failure_handlers: no UAC support (0, 256) Here's /var/log/message log after trying to IM: May 17 16:09:52 sip /usr/local/sbin/ser[47471]: ERROR: udp_send: sendto(sock,0x284be0d0,462,0,0x284bd4f8,16): Host is down(64) May 17 16:09:52 sip /usr/local/sbin/ser[47471]: msg_send: ERROR: udp_send failed May 17 16:09:52 sip /usr/local/sbin/ser[47471]: Warning: run_failure_handlers: no UAC support (0, 256) I set log level for serweb to PEAR_LOG_DEBUG and among some normal trace stuff i can see something like this May 17 16:13:20 serweb [debug] Html form was not assigned to APU apu_aliases3. Useing default. May 17 16:13:20 serweb [debug] Html form was not assigned to APU apu_acl4. Useing default. ( Is there something I forgot to set or is it just normal? I suppose it's ok, if it's "using default"...) ngrep trace show some empty messages from my eyeBeam to SER and backwards. That's all. I've been stuck with this for 4-5 days already and I REALLY need to get it done asap. Someone... anyone... please, suggest something. Best regards, Andrey.

2 2

[Serusers] Noob Info
by Tony Weber 17 May '06

17 May '06

Hi all, I'm a complete noob in using ser. But I was able to "make" ser and start it. But when I do so I only get feedback about what port ser is listening to etc. How can I work with ser? Where can I configure it? Does anyone know a place where I can get like introductional information about using ser? Thanks a lot! Sandybanks btw: my version is ser-0.10.99-dev35-pa-4_src.tar.gz _________________________________________________________________ Nur die MSN Suche sorgt bei einer Web-Recherche für optimale Ergebnisse. http://search.msn.at/

2 1

[Serusers] Detecting Lost IAD Registration
by David 17 May '06

17 May '06

Hello, I am new to using and managing SER server. My company has a large scale implementation of SER and we have been having problems with end users loosing registration on our SER server and in some cases the IAD's will not re-register unless you reboot the IAD. As I am very new to this and have been thrown in head first, I thought I would ask on this list. For trouble shooting purposes, I was wondering if there is a way to automatically detect when an IAD looses registration and then have it fire off an email? Thanks, David

1 0

[Serusers] append_branch To-tag problem
by Ray Jackson 17 May '06

17 May '06

Hi all, We have ser routing in/out calls fine, however we have a problem related to the append_branch feature. After 25 seconds we use append_branch to redirect the call off to another number for voicemail etc. Ser sits behind a stateful call routing engine which handles both inbound and outbound calls to/from the PSTN. The problem is that when append_branch forks off the call it receives back a different tag on the To: field on the OK than that of the original call - hence the OK fails to get back to the original callee (gateway complains of non-matching To: fields) We've tried stripping the tag using subst on the OK, but then the ACK coming back has the same problem (different 'tag' to what is expected in the other direction). Simple question, can Ser work in this situation to 'remember' the To-tag on the forked call somehow - or are we going to need a b2bua to keep state and handle the forked call? Or, perhaps is there a different way to redirect a call without using append_branch? Any help would be appreciated... Cheers, Ray PS. I can provide a call flow example if that would help?

1 0

[Users] textops from other module
by Wolfgang Hottgenroth 17 May '06

17 May '06

Hi, I want to perform a textops function, namely subst, over a SIP message. But I want to do this not from the openser script but from a module I'm about to implement. Unfortunately, the textops module did not provide an API to other modules. But I'm wondering whether it is more than simply removing the 'static' from the function declaration of the subst_f function in textops.c to make this function accessible for other modules. Or do I have a chance to set a pseudo-variable or AVP with the complete regex in one of my own modules functions and perform the subst using that pseudo-variable or AVP in the openser script directly after the call to my own function? Or is the only way to re-implement the subst_f functionality in my own module to use it from there? Thank you very much, Wolfgang

2 1

[Users] Pakistan Phone Numbers $12 Per Month from DIDX.org
by Muneeb Iqbal 17 May '06

17 May '06

DIDX.net now has high quality Pakistan Phone numbers available. Codec Support: g711 - g723, G729, ILBC. Price: $5 Setup, $12 Month You can try it for 36 Hours for FREE. For Complete Available DIDs stock, Please visit www.didx.org/did/ Thanks, Muneeb Iqbal msn = care(a)didx.org skype = DIDxnet Sip : muneeb(a)supertec.com Toll Free: 1-800-357-5800, Ext. 101003 Direct Number : 1-408-884-1966 Fax: 1-206-339-4203 Super Technologies Inc. www.supertec.com

2 1

[Serusers] multiple INVITE ACK
by Nhadie 17 May '06

17 May '06

Hi All, How can I eliminate multiple INVITE ACK of the same call? It's causing some problems on my accounting. PLeasee see attached file for example. Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

1 0

RE: [Serusers] How to add and use uri
by İlker Aktuna (Koç.net) 17 May '06

17 May '06

Hi, Thanks for the information. I didn't have any lookup_user check in the INVITE method. I added it before location check and now all uris seem to work fine. Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 16, 2006 5:54 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How to add and use uri I think, that this should be done using lookup_user (I think, that you have it in config, right?) Vaclav On Tue, May 16, 2006 at 05:49:53PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > Ser_uri works fine and adds the uri. In fact I add a default uri as : > 200000900568888885 200000900568888885(a)sip.test.net > > But then I add a new and short uri as: > 200000900568888885 0202(a)sip.test.net > > This one doesn't work. I think my configuration need something to add for looking up uris while looking up lookation. > What is the right command for that ? > > Thanks, > ilker > > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Tuesday, May 16, 2006 5:42 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] How to add and use uri > > Hi, > I haven't try it, but it should work. > > Are your cmdline arguments ok? Shouldn't they be in different order? > (May be the syntax has changed few days ago.) Try to run your ser_uri without arguments and you will see. And you can run "ser_uri show" to see what was added... > > Vaclav > > On Tue, May 16, 2006 at 04:47:24PM +0300, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Is this something that nobody has tried yet ? Or is it impossible ? > > If it's easy can someone tell me how to use it ? > > > > thanks, > > ilker > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Tuesday, May 16, 2006 11:45 AM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] How to add and use uri > > > > > > > > Hi, > > > > I add an extra uri to a user with ser_uri command: > > > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > > > When 200000900568888885 registers to ser I can call him by dialing > > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > > What should I add to the configuration to lookup the uris to find the location of the user ? > > > > Thanks, > > ilker > > > > > > > > C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi, > > > > Is this something that nobody has tried yet ? Or is it impossible ? > > If it's easy can someone tell me how to use it ? > > > > thanks, > > ilker > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Tuesday, May 16, 2006 11:45 AM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] How to add and use uri > > > > > > > > Hi, > > > > I add an extra uri to a user with ser_uri command: > > > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > > > When 200000900568888885 registers to ser I can call him by dialing > > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > > What should I add to the configuration to lookup the uris to find the location of the user ? > > > > Thanks, > > ilker <http://387555.sigclick.mailinfo.com/sigclick/060F060D/04054D07/03054D0A/157…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] serweb : error Undefined class name 'errorhandler' in application_layer/page_co
by Americania .it 17 May '06

17 May '06

I'm trying to install serweb on Linux Suse 10 with apache2 , php , PEAR , PECL Runkit installed but when I call the page http://host_name/serweb/user/index.php I get the following error : Fatal error: Undefined class name 'errorhandler' in /srv/www/htdocs/serweb/application_layer/page_controler.php on line 102 What can I do ? I've got crazy trying to understand what is wrong ...! Thanks

2 1

[Serusers] Forking problem
by Frank W. Miller 17 May '06

17 May '06

Greetings, I'm new to this list so I don't know whether this should be here or on the developer's list. I've been running a test and come across a problem. I have three phones and the SER proxy. Two of the phones are softphones, the third is an ATA. The ATA is at 192.168.1.3, and the two softphones are at 192.168.1.4 and 192.168.1.5. SER is at 192.168.1.7. In the test, 192.168.1.3 and 192.168.1.4 register with the SER as AOR '100'. 192.168.1.5 then make a call to sip:100@192.168.1.7. The INVITE is forked properly however there is some strange behavior with the ACK handling. It appears that no matter which of the phones answers, the ACK is always sent to the first phone to have registered for the AOR, whether that was the phone that answers or not. I have included an Ethereal trace file that illustrates this behavior. If you graph the VoIP call you can clearly see this situation occuring. You should be able to load this file directly into Ethereal. I would be interested in anyones thoughts on whether this is a bug or not in SER or something else. Thanks, FM

2 2

[Users] Mediaproxy and RTP streams
by Marco Meinardi 16 May '06

16 May '06

Dear all, I'm testing OpenSER with mediaproxy and I want to force the use of mediaproxy in every situation (not only when one of the users is behind a NAT); for this reason I have modified the attached configuration, starting from features-callfwd.5.0.cfg by ONSip. I am experiencing the 3 following situations: 1. Caller is PUBLIC, called is PUBLIC. RTP stream passes through mediaproxy (I verified with tcpdump) 2. Caller is PUBLIC, called is PRIVATE (NATed) RTP stream from PUBLIC to PRIVATE is direct, from PRIVATE to PUBLIC passes through mediaproxy 3. Caller is PRIVATE, called is PRIVATE RTP stream is direct in both ways, no media proxy usage. This behaviour is somehow weird... do you have any idea of what could be the reason? I have tried to manipulate OpenSER configuration but I got no behaviour change. Thanks in advance for your help! -- Marco Meinardi <m.meinardi(a)reteitaly.com> ReteItaly S.r.l. www.reteitaly.com _____________________________________________ C.so Svizzera, 185 - 10149 Torino - Italy Tel. +39 011 7767694 - Mobile +39 335 7878604 Fax +39 011 746179 _____________________________________________ [...] modparam("auth_db|permissions|uri_db|usrloc|acc|domain", "db_url", "postgres://openser:openser@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 1) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("avpops", "avp_url", "postgres://openser:openser@localhost/openser") modparam("avpops", "avp_table", "usr_preferences") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 3) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("<MY OPENSER PBULIC IP>:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { setflag(2); end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- setflag(3); if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(1); } else { sl_send_reply("403", "Forbidden"); }; return; }; if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); setflag(2); if (!isflagset(8)) { setflag(8); log(1,"Uso Media Proxy"); use_media_proxy(); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(1); return; }; if (avp_db_load("$ruri/username", "s:callfwd")) { setflag(22); avp_pushto("$ruri", "s:callfwd"); route(6); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; if (avp_db_load("$ruri/username", "s:fwdbusy")) { if (!avp_check("s:fwdbusy", "eq/$ruri/i")) { setflag(26); }; }; if (avp_db_load("$ruri/username", "s:fwdnoanswer")) { if (!avp_check("s:fwdnoanswer", "eq/$ruri/i")) { setflag(27); }; }; t_on_failure("1"); route(1); } route[6] { # -------------------------------------------------------------------- # Call Forwarding Reply Route Handler # # This must be done as a route block because sl_send_reply() cannot be # called from the failure_route block # -------------------------------------------------------------------- lookup("aliases"); if (!isflagset(22)) { append_branch(); }; if (uri!=myself) { route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); }; route(1); } onreply_route[1] { if ((status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } failure_route[1] { if (t_check_status("487")) { return; }; if (isflagset(26) && t_check_status("486")) { if (avp_pushto("$ruri", "s:fwdbusy")) { avp_delete("s:fwdbusy"); resetflag(26); route(6); return; }; }; if (isflagset(27) && t_check_status("408")) { if (avp_pushto("$ruri", "s:fwdnoanswer")) { avp_delete("s:fwdnoanswer"); resetflag(27); route(6); return; }; }; end_media_session(); }

2 1

RE: [Serusers] Running SER Server behind NAT
by Alan 16 May '06

16 May '06

Thanks for responding. I was referring to the SIP server interface defined with a non-routable class A (10.x.x.x) IP address for example. The PIX firewall is configured with a static NAT translation (12.x.x.x <--> 10.x.x.x) and an access control list which directs traffic destined for port 5060 outside global address to the NAT'ed inside address. The problem I have is when UA1 sends an invite to UA2. After the proxy sends the invite to UA2 the "Record Route" address is the local IP address (10.x.x.x). In result, both UA1 and UA2 never receive a BYE message. Please help. ~Alan -------------------------------------------------------------------------- | SER External | UA2 | UA1 | SER Internal | 12.xxx.xxx.xx | 192.168.215.103 | 151.xxx.xxx.xx | 10.181.0.35 | | | | |INVITE SDP | | | |------------------>| | | | | | | | 100 Trying| | | |<------------------| | | | | | | | 180 Ringing| | | |<------------------| | | | | | | | 200 Ok SDP| | | |<------------------| | | | |RTP | | | |------------------>| | | | | | | 200 Ok| | | |<------------------| | | | 200 Ok| | | |<------------------| | | | 200 Ok| | | |<------------------| | | | |RTP | | | |------------------>| | | |BYE | | | |-------------------------------------->| | |BYE | | | |-------------------------------------->| | |BYE | | | |-------------------------------------->| -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Michael Grigoni Sent: Thursday, May 11, 2006 3:50 AM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] Running SER Server behind NAT Alan wrote: > Is it possible to run SER SIP server behind a NAT? If so, what type of > configuration changes am i looking at? My current scenario is as > follows. > > > Internet <-----> Pix (12.x.x.x translates to 10.x.x.x) <----> SIP Server We have been running ser 0.8.99-dev19 (sparc/openbsd) for more than a year on NAT; our solution required ser to run on the NAT border router so that it could service the public net interfaces and the internal NAT'ed interfaces. We use rtpproxy on the same box. I have not actively watched the lists for any developments involving running it on a host only on a private ip space. I don't know of a ser port to run on the Pix. All external UAs so far have been on public ip addresses; we haven't yet dealt with the issue of external UAs behind NAT (perhaps a STUN solution would work, or a VPN where feasible). Michael Grigoni Cybertheque Museum _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

3 3

[Serusers] UAC support
by Dominique Pichon 16 May '06

16 May '06

Hi I try to play with msilo. I manage to have messages stored in the database but I do not manage to send them to the user when this one becomes on-line. When I look at /var/log/messages: ERROR: mk_proxy: could not resolve hostname: "xxx.fr" with xxx.fr the name of my domain the server is: sip.xxx.fr more details May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: mk_proxy: could not resolve hostname: "xxx.fr" May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: uri2proxy: bad host name in URI <sip:dom@xxx.fr:5062;transport=udp> May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: uri2sock: Can't create a dst proxy May 16 19:41:51 S /usr/local/sbin/ser[12042]: t_uac: no socket found Here is ser.cfg # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns=on # (cmd. line: -r) rev_dns=off # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" listen=address v6 listen=sip.xxx.fr listen=address v4 alias="xxx.fr" alias="canonical name" alias="sip.xxx.fr" alias="v4 address" alias="v4 address" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "db_url","mysql://ser:xxxxx@localhost/ser") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("msilo", "db_url", "mysql://ser:xxxxx@localhost/ser") modparam("msilo", "db_table", "silo") #modparam("msilo", "registrar", "sip:dom@xxx.fr") modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1 ) modparam("acc", "db_url", "mysql://ser:xxxxx@localhost/ser") modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 1) #modparam("acc", "log_fmt", "fisum") modparam("acc", "report_ack", 1) modparam("acc", "log_level", 5) modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication log(1, "Prompting for login/pass\n"); if (!www_authorize("xxx.fr", "subscriber")) { www_challenge("xxx.fr", "0"); }; save("location"); m_dump(); # MSILO - dumping user's offline messages #if (m_dump()) #{ # log(1, "MSILO: offline messages dumped - if they were\n"); #}else{ # log(1, "MSILO: no offline messages dumped\n"); #}; break; }; if (!lookup("location")) { if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); #acc_request("404 Not Found"); break; }; if (method == "MESSAGE") { log(1,"Message recu en absence\n"); if (!t_newtran()) { log(1,"t_newtran MSILO\n"); sl_reply_error(); break; } log(1,"MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log(1,"MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log(1,"MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; #if (method == "MESSAGE") { #log(1, "MSILO: message recu absent\n"); # }; #}else { #if (method == "MESSAGE") { #log(1, "MSILO: message recu present\n"); #}; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } If i add modparam("msilo", "registrar", "sip:dom@xxx.fr") then it complains May 16 19:39:36 S2 /usr/local/sbin/ser[11894]: MESSAGE received -> storing using MSILO May 16 19:39:36 S2 /usr/local/sbin/ser[11894]: MSILO: offline message NOT stored May 16 19:39:36 S2 /usr/local/sbin/ser[11895]: Warning: run_failure_handlers: no UAC support (0, 256) any hints are welcome!

1 0

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Thanks. How do you connect to a SIP server with Windows Messenger 5.1 ? It only allows me to connect to Passport. -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 4:47 PM To: İlker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c-4b9a… click the "continue" button ________________________________ From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) Sent: Tue 5/16/2006 6:42 AM To: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, Where can I find Windows Messenger 5.1 ? Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar Sent: Tuesday, May 16, 2006 3:32 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Which IM client Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/03090E07/07044904/04004500/201…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://387555.sigclick.mailinfo.com/sigclick/070F0500/07044E03/000E4E07/547…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] How to add and use uri
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi, Ser_uri works fine and adds the uri. In fact I add a default uri as : 200000900568888885 200000900568888885(a)sip.test.net But then I add a new and short uri as: 200000900568888885 0202(a)sip.test.net This one doesn't work. I think my configuration need something to add for looking up uris while looking up lookation. What is the right command for that ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 16, 2006 5:42 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How to add and use uri Hi, I haven't try it, but it should work. Are your cmdline arguments ok? Shouldn't they be in different order? (May be the syntax has changed few days ago.) Try to run your ser_uri without arguments and you will see. And you can run "ser_uri show" to see what was added... Vaclav On Tue, May 16, 2006 at 04:47:24PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > Is this something that nobody has tried yet ? Or is it impossible ? > If it's easy can someone tell me how to use it ? > > thanks, > ilker > > ________________________________ > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > On Behalf Of ?lker Aktuna (Koç.net) > Sent: Tuesday, May 16, 2006 11:45 AM > To: serusers(a)lists.iptel.org > Subject: [Serusers] How to add and use uri > > > > Hi, > > I add an extra uri to a user with ser_uri command: > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > When 200000900568888885 registers to ser I can call him by dialing > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > What should I add to the configuration to lookup the uris to find the location of the user ? > > Thanks, > ilker > > > > C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi, > > Is this something that nobody has tried yet ? Or is it impossible ? > If it's easy can someone tell me how to use it ? > > thanks, > ilker > > ________________________________ > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > On Behalf Of ?lker Aktuna (Koç.net) > Sent: Tuesday, May 16, 2006 11:45 AM > To: serusers(a)lists.iptel.org > Subject: [Serusers] How to add and use uri > > > > Hi, > > I add an extra uri to a user with ser_uri command: > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > When 200000900568888885 registers to ser I can call him by dialing > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > What should I add to the configuration to lookup the uris to find the location of the user ? > > Thanks, > ilker > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/0A090604/060C4E04/0D034D > 03/29111392.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/010A0707/07074F07/07024C00/122…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Excuse me ; what works ? Presence ? Watcherinfo ? Everything ? What do I need to make Presence work ? Thanks... -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of samuel Sent: Tuesday, May 16, 2006 5:31 PM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies Blame on me!!!!! It does work!!!! I was trying several things and once I saw something like lookup_domain only works on cache mode and the list was not found but I have just tried and it works..... Apologies!!! Samuel. 2006/5/16, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > This is strange, I try to look on it. > I thought, that lookup_user and lookup_domain work with database > independently on usrloc. > > Vaclav > > On Tue, May 16, 2006 at 09:59:10AM +0200, samuel wrote: > > There's anothing issue that can be mentioned in the handbook: > > > > using usrloc module with db backend (db_mode!=0) entails that all > > lookup_user||lookup_domain calls will fail and the example configs > > that appear on the presence documentation will not offer the > > expected behaviour... > > Another option is to wait until lookup_* functions work with DB backend... > > > > Samuel. > > > > 2006/5/15, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > > >Hi, > > >this problem I'm trying to solve with Ilker Aktuna. I try to > > >simulate it on my machine and let you know. Or if you solve it, please let me know. > > >:-) > > > > > >Please, could you tell me, what things you were missing in presence > > >handbook? I'm trying to do it as useful as possible and whatever > > >ideas are welcome... > > > > > > Vaclav > > > > > >On Mon, May 15, 2006 at 01:38:02PM +0200, samuel wrote: > > >> Hi all, > > >> > > >> I recently had a few hours and start installing the presence > > >> staff and I have to say that I have it amost workign thanks to > > >> the presence handbook, the mailing list and, obviously, a little > > >> bit of code review..:P > > >> > > >> I have two SER instances, the "proxy" and the "presence server" > > >> (both with last CVS code) co-located in the same host and I have > > >> an issue when the "presence server" tries to send the NOTIFY > > >> requests. Below there's an attched log showing the problem (on IP > > >> a.b.c.d I've got the two instances): > > >> > > >> 3(30682) DEBUG notify.c:378: sending winfo notify > > >> 3(30682) DEBUG notify.c:383: winfo document created > > >> 3(30682) DEBUG notify.c:391: creating headers > > >> 3(30682) DEBUG notify.c:398: headers created > > >> 3(30682) DEBUG:tm:t_uac: > > >> next_hop=<sip:a.b.c.d;transport=tcp;ftag=c77b3f33;lr=on> > > >> 3(30682) t_uac: no socket found > > >> 3(30682) DEBUG notify.c:402: request sent with result -7 > > >> 3(30682) ERROR: notify.c:404: Can't send watcherinfo notification > > >> (-7) > > >> > > >> This problem appears in other places, not only in the > > >> notifications for winfo so probably there's somthing in the > > >> selection of the outgoing socket directing to the local IP. > > >> > > >> >From the proxy part I just ust t_forward_nonack for the "SIMPLE" > > >> messages with record route....maybe adding the port in the record > > >> route should help? > > >> > > >> > > >> Samuel. > > >> > > >> _______________________________________________ > > >> Serusers mailing list > > >> serusers(a)lists.iptel.org > > >> http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/010D0604/0407490F/07044D03/925…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] How to add and use uri
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi, Is this something that nobody has tried yet ? Or is it impossible ? If it's easy can someone tell me how to use it ? thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Tuesday, May 16, 2006 11:45 AM To: serusers(a)lists.iptel.org Subject: [Serusers] How to add and use uri Hi, I add an extra uri to a user with ser_uri command: ./ser_uri add 200000900568888885 0202(a)sip.test.net When 200000900568888885 registers to ser I can call him by dialing 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . What should I add to the configuration to lookup the uris to find the location of the user ? Thanks, ilker C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi, Is this something that nobody has tried yet ? Or is it impossible ? If it's easy can someone tell me how to use it ? thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Tuesday, May 16, 2006 11:45 AM To: serusers(a)lists.iptel.org Subject: [Serusers] How to add and use uri Hi, I add an extra uri to a user with ser_uri command: ./ser_uri add 200000900568888885 0202(a)sip.test.net When 200000900568888885 registers to ser I can call him by dialing 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . What should I add to the configuration to lookup the uris to find the location of the user ? Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/0A090604/060C4E04/0D034D03/291…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] PA error sending notifies
by samuel 16 May '06

16 May '06

Hi all, I recently had a few hours and start installing the presence staff and I have to say that I have it amost workign thanks to the presence handbook, the mailing list and, obviously, a little bit of code review..:P I have two SER instances, the "proxy" and the "presence server" (both with last CVS code) co-located in the same host and I have an issue when the "presence server" tries to send the NOTIFY requests. Below there's an attched log showing the problem (on IP a.b.c.d I've got the two instances): 3(30682) DEBUG notify.c:378: sending winfo notify 3(30682) DEBUG notify.c:383: winfo document created 3(30682) DEBUG notify.c:391: creating headers 3(30682) DEBUG notify.c:398: headers created 3(30682) DEBUG:tm:t_uac: next_hop=<sip:a.b.c.d;transport=tcp;ftag=c77b3f33;lr=on> 3(30682) t_uac: no socket found 3(30682) DEBUG notify.c:402: request sent with result -7 3(30682) ERROR: notify.c:404: Can't send watcherinfo notification (-7) This problem appears in other places, not only in the notifications for winfo so probably there's somthing in the selection of the outgoing socket directing to the local IP. >From the proxy part I just ust t_forward_nonack for the "SIMPLE" messages with record route....maybe adding the port in the record route should help? Samuel.

2 12

[Serusers] Active Passive role supported in UAs
by Ladislav Andel 16 May '06

16 May '06

Hello everybody, I'm sorry for this off topic. I'm trying to make a list of UAs which supports active, passive role. (Regarding connection oriented media or so) These UAs can be gateways, hardphones, softphones, B2BUAs etc. I would appreciate any contribution to my list and thank you, Ladislav

2 3

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi, What did you mean by following: >Instead of >> >> if (authorize_message("http://localhost/xcap")) { > >there should be > >if (authorize_message("im-rules.xml")){ Btw, did you receive my email with following questions : >> I have the same problem with notification and other presence messages with you. >> Can you tell me which Linux distribution you are using Ser on ? >> Also please include version numbers for libraries that are required by Ser. >> >> I am trying to find similarities between yours and my ser server. Regards, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of samuel Sent: Monday, May 15, 2006 7:13 PM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies Let's see if I can finish the e-mail before gmail decides it's enough...:P 006/5/15, samuel <samu60(a)gmail.com>: > Following with the handbook... > > the authorize message in the sample confgi files has as parameter the > xcap root while it should have the xml file containing the auth.rules. Instead of > > if (authorize_message("http://localhost/xcap")) { there should be if (authorize_message("im-rules.xml")){ > > > > 2006/5/15, samuel <samu60(a)gmail.com>: > > First of all, I have to thank you for the time you spent writing the > > handbook, it's really really helpfull....I wish all SER related > > parts had this docs.. > > > > I'll try to get familiar with the code of the notifications and I'll > > try to find something....which I don't thing so :P. I'll also merge > > the two functionalities (proxy + presence) in a unique config file > > to see if it works. > > I hope I can provide more info these following days. > > > > About the missing things in the presence handbook, probably the most > > important is the new xcap module because in the sample config files > > it's missing. > > Another thing is that in the XCAP structure description, the > > im-rules directory is missing, which might lead to > > misunderstandings. I downloaded the structure from the iptel's ftp > > and inside the im-rules there were several files corresponding to > > presence-rules which should be either removed or updated with the > > im-rules namespaces and removing the whitelist. > > > > Thanks, > > > > Samuel. > > > > > > > > > > 2006/5/15, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > > > Hi, > > > this problem I'm trying to solve with Ilker Aktuna. I try to > > > simulate it on my machine and let you know. Or if you solve it, please let me know. > > > :-) > > > > > > Please, could you tell me, what things you were missing in > > > presence handbook? I'm trying to do it as useful as possible and > > > whatever ideas are welcome... > > > > > > Vaclav > > > > > > On Mon, May 15, 2006 at 01:38:02PM +0200, samuel wrote: > > > > Hi all, > > > > > > > > I recently had a few hours and start installing the presence > > > > staff and I have to say that I have it amost workign thanks to > > > > the presence handbook, the mailing list and, obviously, a little > > > > bit of code review..:P > > > > > > > > I have two SER instances, the "proxy" and the "presence server" > > > > (both with last CVS code) co-located in the same host and I have > > > > an issue when the "presence server" tries to send the NOTIFY > > > > requests. Below there's an attched log showing the problem (on > > > > IP a.b.c.d I've got the two instances): > > > > > > > > 3(30682) DEBUG notify.c:378: sending winfo notify > > > > 3(30682) DEBUG notify.c:383: winfo document created > > > > 3(30682) DEBUG notify.c:391: creating headers > > > > 3(30682) DEBUG notify.c:398: headers created > > > > 3(30682) DEBUG:tm:t_uac: > > > > next_hop=<sip:a.b.c.d;transport=tcp;ftag=c77b3f33;lr=on> > > > > 3(30682) t_uac: no socket found > > > > 3(30682) DEBUG notify.c:402: request sent with result -7 > > > > 3(30682) ERROR: notify.c:404: Can't send watcherinfo > > > > notification (-7) > > > > > > > > This problem appears in other places, not only in the > > > > notifications for winfo so probably there's somthing in the > > > > selection of the outgoing socket directing to the local IP. > > > > > > > > >From the proxy part I just ust t_forward_nonack for the "SIMPLE" > > > > messages with record route....maybe adding the port in the > > > > record route should help? <http://387555.sigclick.mailinfo.com/sigclick/070F0707/04004504/05044C00/247…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

3 3

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Should I set them anyway ? I mean what happens if I don't set any im-rules ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 16, 2006 3:52 PM To: İlker Aktuna (Koç.net) Cc: samuel; serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies No SIP client is able to set these "im-rules" documents, there are not standardized in any way. But you can create them manually on XCAP server... Vaclav On Tue, May 16, 2006 at 11:28:53AM +0300, ?lker Aktuna (Koç.net) wrote: > Hi again, > > Forgive me as I don't understand as much as you about Ser configuration. > I still have questions: > > Should I change the configuration as you described ( authorize_message("im-rules.xml") ) ? > I am using Eyebeam client; would that make a change for me ? > After those changes did you succeed in receiving the Xcap authorization message/notification ? > > What else should I change ? > > Should I use im-rules.xml ? Should I change something in Eyebeam client for using this file ? > > You said you had merged two configs and now you don't get the same problem. How did you merge the configs ? > An example configuration would be very helpful to me, if you solved the issue. > > Thanks, > ilker > > -----Original Message----- > From: samuel [mailto:samu60@gmail.com] > Sent: Tuesday, May 16, 2006 10:53 AM > To: ?lker Aktuna (Koç.net) > Cc: Vaclav Kubart; serusers(a)lists.iptel.org > Subject: Re: [Serusers] PA error sending notifies > > If you are using XCAP authentication for MESSAGEs, there's a function called authorize_message that needs to have as parameter the file name of the IM ruleset. > For user sam, in xcap-root/im-rules/users/sam/im-rules.xml there are > the rules for this function. The XML file is similar to the > presence-rules but has important differences (correct me if I'm wrong, > Vaclav!!!): > *it only has a blacklist parameter (no whitelist!!) *the namespace is > different (so be carefull in copy&paste from the > presence-rules!!!) and, as Vaclav poitned out "proprietary" from iptel. > > > About the structure I have: x86 debian testing. Libraries versions I don't know exactly but the ones in the testing repository EXCEPT a library which I had to get for serweb from the stable version...but it's not affecting SER part. > > Samuel. > 2006/5/16, ?lker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > > > > > > Hi, > > > > What did you mean by following: > > > > >Instead of > > >> > > >> if (authorize_message("http://localhost/xcap")) { > > > > > >there should be > > > > > >if (authorize_message("im-rules.xml")){ > > > > Btw, did you receive my email with following questions : > > > > >> I have the same problem with notification and other presence > > >> messages > > with you. > > >> Can you tell me which Linux distribution you are using Ser on ? > > >> Also please include version numbers for libraries that are > > >> required by > > Ser. > > >> > > >> I am trying to find similarities between yours and my ser server. > > > > Regards, > > ilker > > > > -----Original Message----- > > From: serusers-bounces(a)lists.iptel.org > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of samuel > > Sent: Monday, May 15, 2006 7:13 PM > > To: Vaclav Kubart > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] PA error sending notifies > > > > Let's see if I can finish the e-mail before gmail decides it's > > enough...:P > > > > 006/5/15, samuel <samu60(a)gmail.com>: > > > Following with the handbook... > > > > > > > > the authorize message in the sample confgi files has as parameter > > > the xcap root while it should have the xml file containing the auth.rules. > > > > > > Instead of > > > > > > > > if (authorize_message("http://localhost/xcap")) { > > > > there should be > > > > if (authorize_message("im-rules.xml")){ > > > > > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/07090204/00074C02/07084903/441…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Cannot authenticate with SER after upgrade to 0.9.6
by Stephen Helfen 16 May '06

16 May '06

Here is what my userloc and auth_db params looked like on SER 0.8.12 # -- usrloc params -- # Change the default SER db user login and password modparam("usrloc", "db_url", "mysql://nvproxy:<password>@localhost/nv_proxy") # # Set to persistent storage in SER db modparam("usrloc", "db_mode", 2) # # # -- auth_db params -- # Change the default SER db user login and password modparam("auth_db", "db_url", "mysql://nvproxy:<password>@localhost/nv_proxy") # # Use a prepopulated ha1 authentication string modparam("auth_db", "calculate_ha1", no) # # Change the default password column modparam("auth_db", "password_column", "ha1") Upon upgrading to 0.9.6, I now get the following messages in my /var/log/messages May 15 16:09:18 ser /usr/sbin/ser[22006]: Maxfwd module- initializing May 15 16:09:18 ser /usr/sbin/ser[22006]: submit_query(): Table 'nv_proxy.version' doesn't exist May 15 16:09:18 ser /usr/sbin/ser[22006]: submit_query(): Error while submitting query May 15 16:09:18 ser /usr/sbin/ser[22006]: table_version(): Error in db_query May 15 16:09:18 ser /usr/sbin/ser[22006]: auth_db:str_fixup(): Error while querying table version May 15 16:09:18 ser /usr/sbin/ser[22006]: ERROR: fix_expr : fix_actions error Why is it looking for a 'version' table in my proxy database rather than the ser database?? If I change the modparam statements to point to the ser database, SER starts correctly, but then I cannot register my UA with it, nor process any calls. Thanks in advance. Steve

1 1

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi, Where can I find Windows Messenger 5.1 ? Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar Sent: Tuesday, May 16, 2006 3:32 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Which IM client Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/03090E07/07044904/04004500/201…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Multiple BYE's for same call
by mkumar＠mantragroup.com 16 May '06

16 May '06

Hi All, I was able to install SER and SERWEB successfully and use them. Recently I came across a problem with SER call detail records (CDR's), few of the calls are recorded as two calls dialed at the same time to same number and when I see the call log in SERWEB I find two calls at the sametime with 3 or 4 seconds difference in their call duration. When I checked the SER DataBase I found two BYE's for the same call and SERWEB is showing them as two different calls. Please tell me how can I fix this? I am unable to get minutes dialed out by a customer for a period correctly because of this. Thanks, Manoj.

1 0

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi again, Forgive me as I don't understand as much as you about Ser configuration. I still have questions: Should I change the configuration as you described ( authorize_message("im-rules.xml") ) ? I am using Eyebeam client; would that make a change for me ? After those changes did you succeed in receiving the Xcap authorization message/notification ? What else should I change ? Should I use im-rules.xml ? Should I change something in Eyebeam client for using this file ? You said you had merged two configs and now you don't get the same problem. How did you merge the configs ? An example configuration would be very helpful to me, if you solved the issue. Thanks, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Tuesday, May 16, 2006 10:53 AM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies If you are using XCAP authentication for MESSAGEs, there's a function called authorize_message that needs to have as parameter the file name of the IM ruleset. For user sam, in xcap-root/im-rules/users/sam/im-rules.xml there are the rules for this function. The XML file is similar to the presence-rules but has important differences (correct me if I'm wrong, Vaclav!!!): *it only has a blacklist parameter (no whitelist!!) *the namespace is different (so be carefull in copy&paste from the presence-rules!!!) and, as Vaclav poitned out "proprietary" from iptel. About the structure I have: x86 debian testing. Libraries versions I don't know exactly but the ones in the testing repository EXCEPT a library which I had to get for serweb from the stable version...but it's not affecting SER part. Samuel. 2006/5/16, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi, > > What did you mean by following: > > >Instead of > >> > >> if (authorize_message("http://localhost/xcap")) { > > > >there should be > > > >if (authorize_message("im-rules.xml")){ > > Btw, did you receive my email with following questions : > > >> I have the same problem with notification and other presence > >> messages > with you. > >> Can you tell me which Linux distribution you are using Ser on ? > >> Also please include version numbers for libraries that are required > >> by > Ser. > >> > >> I am trying to find similarities between yours and my ser server. > > Regards, > ilker > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of samuel > Sent: Monday, May 15, 2006 7:13 PM > To: Vaclav Kubart > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] PA error sending notifies > > Let's see if I can finish the e-mail before gmail decides it's > enough...:P > > 006/5/15, samuel <samu60(a)gmail.com>: > > Following with the handbook... > > > > > the authorize message in the sample confgi files has as parameter > > the xcap root while it should have the xml file containing the auth.rules. > > > Instead of > > > > > if (authorize_message("http://localhost/xcap")) { > > there should be > > if (authorize_message("im-rules.xml")){ > > > > > > > > > 2006/5/15, samuel <samu60(a)gmail.com>: > > > First of all, I have to thank you for the time you spent writing > > > the handbook, it's really really helpfull....I wish all SER > > > related parts had this docs.. > > > > > > I'll try to get familiar with the code of the notifications and > > > I'll try to find something....which I don't thing so :P. I'll also > > > merge the two functionalities (proxy + presence) in a unique > > > config file to see if it works. > > > I hope I can provide more info these following days. > > > > > > About the missing things in the presence handbook, probably the > > > most important is the new xcap module because in the sample config > > > files it's missing. > > > Another thing is that in the XCAP structure description, the > > > im-rules directory is missing, which might lead to > > > misunderstandings. I downloaded the structure from the iptel's ftp > > > and inside the im-rules there were several files corresponding to > > > presence-rules which should be either removed or updated with the > > > im-rules namespaces and removing the whitelist. > > > > > > Thanks, > > > > > > Samuel. > > > <http://387555.sigclick.mailinfo.com/sigclick/03090007/07044D07/02024B00/101…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Which IM client
by Suraj Kumar 16 May '06

16 May '06

Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj

2 1

[Serusers] serweb CTD and message
by Andrey Kouprianov 16 May '06

16 May '06

Hello again, I've sent this message already, but no reply yet. Anyway, Im still facing the problem with CTD and IM in serweb. All the time it would say "503 Service Unavailable". /var/log/messages shows May 15 14:43:14 sip /usr/local/sbin/ser[79174]: ERROR: udp_send: sendto(sock,0x284c0800,452,0,0x284bf208,16): Host is down(64) May 15 14:43:14 sip /usr/local/sbin/ser[79174]: msg_send: ERROR: udp_send failed May 15 14:43:14 sip /usr/local/sbin/ser[79174]: Warning: run_failure_handlers: no UAC support (0, 256) What host is down?? /var/log/serweb shows May 12 22:02:26 serweb [debug] Html form was not assigned to APU apu_aliases3. Useing default. May 12 22:02:26 serweb [debug] Html form was not assigned to APU apu_acl4. Useing default. May 12 22:02:30 serweb [debug] Html form was not assigned to APU apu_aliases3. Useing default. May 12 22:02:30 serweb [debug] Html form was not assigned to APU apu_acl4. Useing default. May 12 22:04:00 serweb [debug] Html form was not assigned to APU apu_aliases3. Useing default. May 12 22:04:00 serweb [debug] Html form was not assigned to APU apu_acl4. Useing default. Is that a problem? Please, can anyone tell me what happened?? Regards, Andrey.

1 1

[Users] Active Passive role supported in UAs
by Ladislav Andel 16 May '06

16 May '06

Hello everybody, I'm sorry for this off topic. I'm trying to make a list of UAs which supports active, passive role. (Regarding connection oriented media or so) These UAs can be gateways, hardphones, softphones, B2BUAs etc. I would appreciate any contribution to my list and thank you, Ladislav

1 1

[Serusers] "old" sems code ...
by Cesc 16 May '06

16 May '06

Hi, what is the status of the old sems code? what is going to happen with it? How much is taken from the "old" code to the "new" code? Regards, Cesc

2 1

[Serusers] How to add and use uri
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi, I add an extra uri to a user with ser_uri command: ./ser_uri add 200000900568888885 0202(a)sip.test.net When 200000900568888885 registers to ser I can call him by dialing 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . What should I add to the configuration to lookup the uris to find the location of the user ? Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/02090704/06074807/03044C03/111…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Hi Vaclav, Do you still need me to send you ngrep output and ser log ? Or else, did you find out where the problem is, from Samuel's information ? If you can find the problem and suggest some fixes, I'd be glad to test it on my system. Please let me know... Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Vaclav Kubart Sent: Tuesday, May 16, 2006 11:13 AM To: samuel Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies Interesting results. Go ahead... :-) Two rulesets are due to their separation in XCAP/authorization related drafts, but you are right, in one file it could be better so I will modify the parser to accept more rulesets in one file... Vaclav On Tue, May 16, 2006 at 09:44:56AM +0200, samuel wrote: > Inline... > > 2006/5/16, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > >> First of all, I have to thank you for the time you spent writing > >> the handbook, it's really really helpfull....I wish all SER related > >> parts had this docs.. > > > >Thanks. :-) It is nice to hear something like that. > > > >> > >> I'll try to get familiar with the code of the notifications and > >> I'll try to find something....which I don't thing so :P. I'll also > >> merge the two functionalities (proxy + presence) in a unique config > >> file to see if it works. > >> I hope I can provide more info these following days. > > > >Thanks. > > > > I've merged the configs without much success...I still have the > problem of sending the NOTIFY but in another function: > > May 15 20:39:07 localhost /usr/local/sbin/ser[19354]: ERROR: uri2sock: > no corresponding socket for af 2 > May 15 20:39:07 localhost /usr/local/sbin/ser[19354]: ERROR: > euac_funcs.c:219: BUG: can't send SUBSCRIBE without contact > > Internally, though I thing everything goes to the same point, when > trying to set the dest_info structure in tm/ut.h, there's some problem > (which I have no clue yet why) when selecting the socket and I think > that the condition that always raise the errors when sending notifies > is: > > dst->send_sock==0 > > This is just the first impression I have...let's see if I can find > something more usefull today or I'll run out of time :( > > There's the "CVS log" > 2006-04-13 added uri2dst(), simplified uri2sock() (andrei) So we can > ask Andrei wether something has changed this last 2 months that can > affect sending the requests from the uac-presence connection. > > > > > > >> > >> About the missing things in the presence handbook, probably the > >> most important is the new xcap module because in the sample config > >> files it's missing. > > > >You are right, but in the "compiled" version of presence handbook > >(published on iptel's ftp) is described current presence snapshot > >which doesn't have xcap module. > > > >In the source version of the handbook (in directory doc/presence of > >SER source tree) is the description still missing too, but will be > >added soon. :-) > > > >> Another thing is that in the XCAP structure description, the > >> im-rules directory is missing, which might lead to > >> misunderstandings. I downloaded the structure from the iptel's ftp > >> and inside the im-rules there were several files corresponding to > >> presence-rules which should be either removed or updated with the > >> im-rules namespaces and removing the whitelist. > > > >Thanks! I will correct it. > > > >By the way, "im-rules" are NOT standardized in any way - we (at > >iptel) only needed something like that, so it is there... > > I don't know wethere it's required to have two different rulesets but > if you have required it I just haven't faced yet the use case so I > guess it's the way to go... > > > > > Vaclav > > > >> > >> Thanks, > >> > >> Samuel. > >> > >> > >> > >> <http://387555.sigclick.mailinfo.com/sigclick/010A0607/04004D07/00064D00/122…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] CDRTool mailing list
by Cameron Beattie 16 May '06

16 May '06

Forgive the cross posting but I know there are some users on this list interested in CDRTool. A CDRTool-users mailing list has been created at coollist.com since there didn't appear to be a relevant mailing list in existence. To subscribe, visit http://www.coollist.com/subscribe.html and enter the list name CDRTool-users. The list is not sponsored by, affiliated with or endorsed by ag-projects, the authors of CDRTool. Regards Cameron

2 1

[Users] FYI: bug in radiusclient ng for 64b
by Daniel-Constantin Mierla 16 May '06

16 May '06

On 05/16/06 02:48, Maxim Sobolev wrote: > Hi, > > Reportedly there is an problem in radiusclient library with md5 hash > calculation on 64bit platforms (amd64, sparc64, etc), which results in > server rejecting requests even with proper secret configured on > client. I have applied a fix, but don't have access to any 64bit > hardware, therefore can't verify. > > Therefore, if anybody is having problems with radiusclient on 64bit > arch he is more than welcome to try update to the latest version from > cvs and let me know if it helps or not. Instructions on checking out > sources from berlios cvs are here: > https://developer.berlios.de/cvs/?group_id=1208. > > Thanks! > > -Maxim

1 0

[Serusers] Critical bug in radiusclient on 64bit platforms [testers needed]
by Maxim Sobolev 15 May '06

15 May '06

Hi, Reportedly there is an problem in radiusclient library with md5 hash calculation on 64bit platforms (amd64, sparc64, etc), which results in server rejecting requests even with proper secret configured on client. I have applied a fix, but don't have access to any 64bit hardware, therefore can't verify. Therefore, if anybody is having problems with radiusclient on 64bit arch he is more than welcome to try update to the latest version from cvs and let me know if it helps or not. Instructions on checking out sources from berlios cvs are here: https://developer.berlios.de/cvs/?group_id=1208. Thanks! -Maxim

1 0

RE: [Users] AVP usage.
by Ricardo Martinez 15 May '06

15 May '06

Thanks Daniel, But, is more quick/efficient if i use integer avp's instead of string based avp's? Thanks! Ricardo.- > -----Mensaje original----- > De: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > Enviado el: Lunes, 15 de Mayo de 2006 17:14 > Para: Ricardo Martinez > CC: 'users(a)openser.org' > Asunto: Re: [Users] AVP usage. > > > Hello, > > this may help you a bit. There are some examples of using > integer-named > avps. > http://openser.org/docs/openser-radius-1.0.x.html > > Cheers, > Daniel > > > On 05/15/06 23:27, Ricardo Martinez wrote: > > Hello. > > I have a question. Is there a way to optimize the use of AVP's. > > Right now i'm using avp_radius to load client's attributes > from my database. > > These attributes are flags with value ON/OFF. Inside my > configuration i'm > > using these values with avp names : callee_attr1, > callee_attr2, etc. I > > have read somewhere in the list that if i use numeric avp's > instead of > > string the processing is more quick. Is this ok?. If the > answer is yes, how > > is the syntax for this?. > > For example i'm loading avp attributes like : > > > > SIP-AVP="attr1:on" > > SIP-AVP="attr2:off" > > > > then i my configuration : > > if ( avp_check("callee_attr1", "eq/s:on/g") ) { > > xlog("L_INFO", "time [$Tf] : Something XXXX\n"); > > route(8); > > return; > > }; > > > > Can someone guide me on this point ? > > Thanks in advance, > > > > Regards, > > > > Ricardo Martinez.- > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > >

2 1

[Users] AVP usage.
by Ricardo Martinez 15 May '06

15 May '06

Hello. I have a question. Is there a way to optimize the use of AVP's. Right now i'm using avp_radius to load client's attributes from my database. These attributes are flags with value ON/OFF. Inside my configuration i'm using these values with avp names : callee_attr1, callee_attr2, etc. I have read somewhere in the list that if i use numeric avp's instead of string the processing is more quick. Is this ok?. If the answer is yes, how is the syntax for this?. For example i'm loading avp attributes like : SIP-AVP="attr1:on" SIP-AVP="attr2:off" then i my configuration : if ( avp_check("callee_attr1", "eq/s:on/g") ) { xlog("L_INFO", "time [$Tf] : Something XXXX\n"); route(8); return; }; Can someone guide me on this point ? Thanks in advance, Regards, Ricardo Martinez.-

2 1

RE: [Users] Database AVP
by Douglas Garstang 15 May '06

15 May '06

> On 05/10/2006 01:38 AM, Douglas Garstang wrote: > > Can someone post/link to some examples of how to use avp > module to write/read data to/from MySQL tables? > > > maybe the new avp_db_query() is more straightforward, but it > is only on > development version. > > http://openser.org/docs/modules/1.1.x/avpops.html#AEN268 > > > The openser.org docs are reeeeealy bad. > > > Then try to improve them. Are you kidding? How can I improve them when I don't understand the product fully, because the documentation is so bad? I really believe that people adding to the documentation by exploring themselves is a VERY BAD idea. When you do this, you make assumptions based on the information you currently have available to you. When that information is incomplete, you make incorrect assumptions. You find that later on, things break in certain conditions because your assumptions where bad in the first place. You also contribute to more bad information when you write documentation based on what you THINK you know, and make it available to others. This is why the people who know the product the best, the developers, should be the ones writing the documentation. Doug.

5 4

[Users] MESSAGE problem
by Darko 15 May '06

15 May '06

It is SOLVED. It took some time to realize that m_dump() act as client to opensip server (even local) so it was firewall and opensip.cfg relay part issue. Thanks, Darko

1 0

[Users] MESSAGE problem
by Darko 15 May '06

15 May '06

Hi, I am trying to set up message handling for offline users. Storing seems to work ok - message is in database and all fields seems to be correct. Dumping doesn't work - it is called like in examples - just after save function in part handling REGISTER message but no packets at all is delivered to registering UA (seen by ethereal), except ones need for register. part of debug log for handling one message (11th in the database): 14(15501) DEBUG: timer routine:0,tl=0x4068410c next=(nil) 14(15501) DEBUG: final_response_handler:stop retr. and send CANCEL (0x40683fe0) 14(15501) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408 14(15501) DEBUG:tm:local_reply: branch=0, save=0, winner=0 14(15501) DEBUG:tm:local_reply: local transaction completed 14(15501) DBG: trans=0x40683fe0, callback type 256, id 0 entered 14(15501) MSILO:m_tm_callback: completed with status 408 [mid: 1080573260/11] 14(15501) MSILO:m_tm_callback: message <11> was not sent successfully 14(15501) MSILO: msg_list_set_flag: mid:11 fl:8 14(15501) DEBUG: add_to_tail_of_timer[2]: 0x40684028 14(15501) DEBUG: final_response_handler : done TIA, Darko

2 2

RE: [Users] clustering
by Douglas Garstang 15 May '06

15 May '06

I thought that was already done? I remember asking this several weeks back, and was told that t_replicate() would support multiple destinations in the next release. > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Wednesday, May 10, 2006 1:25 PM > To: Douglas Garstang > Cc: Edson; unplug; users(a)openser.org > Subject: Re: [Users] clustering > > > yes, that's right - I will take a look to see how difficult > is to change > t_replicate() to be able to sent to more destinations in parallel. > > regards, > bogdan > > Douglas Garstang wrote: > > >Then, if system N fails, all systems >N also fail. That's > not very redundant. > > > > > > > >>-----Original Message----- > >>From: Edson [mailto:4lists@gmail.com] > >>Sent: Wednesday, May 10, 2006 9:01 AM > >>To: Douglas Garstang; 'Bogdan-Andrei Iancu'; 'unplug' > >>Cc: users(a)openser.org > >>Subject: RE: [Users] clustering > >> > >> > >>Create a 'chain' of t_replicate (1->2->3->...->n). Than You > >>can have 'n' > >>Proxies in the 'cluster'... > >> > >>Edson. > >> > >> > >> > >>>-----Original Message----- > >>>From: users-bounces(a)openser.org > >>> > >>> > >>[mailto:users-bounces@openser.org] On > >> > >> > >>>Behalf Of Douglas Garstang > >>>Sent: quarta-feira, 10 de maio de 2006 11:49 > >>>To: Bogdan-Andrei Iancu; unplug > >>>Cc: users(a)openser.org > >>>Subject: RE: [Users] clustering > >>> > >>>Yes, but t_replicate() only allows you to replicate to ONE > >>> > >>> > >>other OpenSER > >> > >> > >>>system. Two OpenSER systems is not a redundant configuration - 3 is > >>>redundant. > >>> > >>> > >>> > >>>>-----Original Message----- > >>>>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >>>>Sent: Wednesday, May 10, 2006 5:28 AM > >>>>To: unplug > >>>>Cc: users(a)openser.org > >>>>Subject: Re: [Users] clustering > >>>> > >>>> > >>>>Hi, > >>>> > >>>>try yo google on the mailing list - the topic was often > >>>>debated. search > >>>>also for t_replicate() and replication. > >>>> > >>>>regards, > >>>>bogdan > >>>> > >>>>unplug wrote: > >>>> > >>>> > >>>> > >>>>>How to do the clustering of openser? Any reference? > >>>>> > >>>>>_______________________________________________ > >>>>>Users mailing list > >>>>>Users(a)openser.org > >>>>>http://openser.org/cgi-bin/mailman/listinfo/users > >>>>> > >>>>> > >>>>> > >>>>> > >>>>_______________________________________________ > >>>>Users mailing list > >>>>Users(a)openser.org > >>>>http://openser.org/cgi-bin/mailman/listinfo/users > >>>> > >>>> > >>>> > >>>_______________________________________________ > >>>Users mailing list > >>>Users(a)openser.org > >>>http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > > > > > > > >

2 1

Re: [Users] Stateful Transfers
by Bogdan-Andrei Iancu 15 May '06

15 May '06

Hi, in this case you will to use an algorithm that uses some information that is common to the original call and the new call. If you are not able to link the calls (logically) you will not be able to send them to same destination. regards, bogdan Douglas Garstang wrote: >We're using algorithm 0, which hashes over the callid, but that doesn't help. >The polycom phones send a new invite with a NEW callid when you hit transfer. > >Doug. > > > >>-----Original Message----- >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>Sent: Wednesday, May 10, 2006 4:01 PM >>To: Douglas Garstang >>Cc: users(a)openser.org >>Subject: Re: [Users] Stateful Transfers >> >> >>Hi, >> >>what dispatching algorithm are you using? >> >>regards, >>bogdan >> >>Douglas Garstang wrote: >> >> >> >>>I got a big problem here that I don't know how to fix. >>> >>>An OpenSER system forwards calls from phones to Asterisk >>> >>> >>boxes. Up until now we had been using the dispatcher to >>evenly distribute calls to the Asterisk boxes. However, when >>someone transfers a call, using the dispatcher, the call can >>go to a different Asterisk box, which breaks the transfer. >> >> >>>I need to find some way to make OpenSER route transfers to >>> >>> >>the same Asterisk system. I'm not sure how to do this. If >>there was some way to, upon an INVITE, check and see if there >>was already a call in progress for that user and then send it >>to the same Asterisk system. Would stateful processing help >>in this way? Can stateful processing 'remember' that there's >>a call already in progress like this, or does the stateful >>simply relate to stateful processing of a single call from >>INVITE to OK/ACK? >> >> >>>Doug. >>> >>> >>> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >>> >>> > > >

1 0

[Users] How to check RPID in Header
by martin＠campus-merseburg.de 15 May '06

15 May '06

Hi, how can i check the RPID in the header for the flag "privacy=full"? i tried it with textops, but it didnt work. any other ideas? bye, martin

4 6

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 15 May '06

15 May '06

Hi Samuel, I have the same problem with notification and other presence messages with you. Can you tell me which Linux distribution you are using Ser on ? Also please include version numbers for libraries that are required by Ser. I am trying to find similarities between yours and my ser server. Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of samuel Sent: Monday, May 15, 2006 5:28 PM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] PA error sending notifies First of all, I have to thank you for the time you spent writing the handbook, it's really really helpfull....I wish all SER related parts had this docs.. I'll try to get familiar with the code of the notifications and I'll try to find something....which I don't thing so :P. I'll also merge the two functionalities (proxy + presence) in a unique config file to see if it works. I hope I can provide more info these following days. About the missing things in the presence handbook, probably the most important is the new xcap module because in the sample config files it's missing. Another thing is that in the XCAP structure description, the im-rules directory is missing, which might lead to misunderstandings. I downloaded the structure from the iptel's ftp and inside the im-rules there were several files corresponding to presence-rules which should be either removed or updated with the im-rules namespaces and removing the whitelist. Thanks, Samuel. 2006/5/15, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > Hi, > this problem I'm trying to solve with Ilker Aktuna. I try to simulate > it on my machine and let you know. Or if you solve it, please let me know. > :-) > > Please, could you tell me, what things you were missing in presence > handbook? I'm trying to do it as useful as possible and whatever ideas > are welcome... > > Vaclav > > On Mon, May 15, 2006 at 01:38:02PM +0200, samuel wrote: > > Hi all, > > > > I recently had a few hours and start installing the presence staff > > and I have to say that I have it amost workign thanks to the > > presence handbook, the mailing list and, obviously, a little bit of > > code review..:P > > > > I have two SER instances, the "proxy" and the "presence server" > > (both with last CVS code) co-located in the same host and I have an > > issue when the "presence server" tries to send the NOTIFY requests. > > Below there's an attched log showing the problem (on IP a.b.c.d I've > > got the two instances): > > > > 3(30682) DEBUG notify.c:378: sending winfo notify > > 3(30682) DEBUG notify.c:383: winfo document created > > 3(30682) DEBUG notify.c:391: creating headers > > 3(30682) DEBUG notify.c:398: headers created > > 3(30682) DEBUG:tm:t_uac: > > next_hop=<sip:a.b.c.d;transport=tcp;ftag=c77b3f33;lr=on> > > 3(30682) t_uac: no socket found > > 3(30682) DEBUG notify.c:402: request sent with result -7 > > 3(30682) ERROR: notify.c:404: Can't send watcherinfo notification > > (-7) > > > > This problem appears in other places, not only in the notifications > > for winfo so probably there's somthing in the selection of the > > outgoing socket directing to the local IP. > > > > >From the proxy part I just ust t_forward_nonack for the "SIMPLE" > > messages with record route....maybe adding the port in the record > > route should help? > > > > > > Samuel. > > <http://387555.sigclick.mailinfo.com/sigclick/010A0602/07074E00/02014D05/622…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Users] How many SER and asterisk servers does FWD users.
by Rodney G. McDuff 15 May '06

15 May '06

Hi All Just out of curiosity does anyone have a guestimate of how many SER and Asterisk servers FWD uses to provision their +500K customers? -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

5 5

[Serusers] One way Voice using SER
by ram 15 May '06

15 May '06

Hi I have installed SER and running But i have problem with One way Voice I have DID from provider routed to SER I have registered iam able to login and able to make calls out when i make calls out, i dont have any problem of voice But when some one call to my DID, the Phone rings when i talk from behind NAT, other side not able to hear But iam able to hear other side of the Voice My setup looks like this Phone-Sipura------NAT SERVER------SER------Sipura--Phone help will be apprciated ram

2 2

[Serusers] required type multipart/related not in Accept headers
by samuel 15 May '06

15 May '06

More about PA... I have created the resource list for the user's contact list and I am sending a SUBSCRIBE to it with Req-URI sam-list(a)test.mydomain.com. Unfortunately I've got next ERROR in the log: 5(30685) list named default 5(30685) XCAP uri 'http://localhost/xcap/resource-lists/users/sam/resource-list.xml' 5(30685) parse_headers: flags=21 5(30685) ERROR: rls_handler.c:201: required type multipart/related not in Accept headers Is there some config issue either in my eyeBeam or in the SER that is causing this problem? Any comment is really wellcome!! Samuel.

2 1

[Users] (open)serpgctl
by Marco Meinardi 15 May '06

15 May '06

Dear all, in the last version of OpenSER 1.0.1 I found the utility serpgctl (located in openser-1.0.1/modules/postgres), which should replace openserctl for usage with PostgreSQL. However, this utility is not up to date with latest fifo commands and it differs quite much from openserctl. Does anyone have an up-to-date openserctl for using with PostgreSQL? Thanks in advance, regards. -- Marco Meinardi <m.meinardi(a)reteitaly.com> ReteItaly S.r.l. www.reteitaly.com _____________________________________________ C.so Svizzera, 185 - 10149 Torino - Italy Tel. +39 011 7767694 - Mobile +39 335 7878604 Fax +39 011 746179 _____________________________________________

2 1

[Serusers] (no subject)
by rekik refka 15 May '06

15 May '06

hello, I'm seaching to develop a service with SER but t don't know a way to do it. Can you help me. thank you in advance.

1 0

[Serusers] compilation error ... building static modules
by Cesc 15 May '06

15 May '06

Hi, Just out of curiosity, i tried to build ser with static modules ... I use ser.0.9.6 (from January or so). This is the error i got ... any quick answer? Everything else seems to work fine ... Making static module make[1]: Entering directory `/home/sam/svn/ser/modules/tm' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DSTATIC_AUTH -DSTATIC_AUTH_DB -DSTATIC_DBTEXT -DSTATIC_DOMAIN -DSTATIC_GROUP -DSTATIC_MAXFWD -DSTATIC_REGISTRAR -DSTATIC_RR -DSTATIC_SECTIC -DSTATIC_SL -DSTATIC_TEXTOPS -DSTATIC_TIC -DSTATIC_TM -DSTATIC_URI -DSTATIC_URI_DB -DSTATIC_USRLOC -DSTATIC_XLOG -DNAME='"ser"' -DVERSION='"0.9.6-tls"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3.5"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DUSE_TLS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/usr/local/ssl/include -I/usr/local/ssl/include -c tm.c -o tm.o tm.c: In function `fixup_str2regexp': tm.c:398: error: `exports' undeclared (first use in this function) tm.c:398: error: (Each undeclared identifier is reported only once tm.c:398: error: for each function it appears in.) make[1]: *** [tm.o] Error 1 Cesc

1 1

[Serusers] Installing rtp proxy
by luke.2.pilgrim＠bt.com 15 May '06

15 May '06

Hi all, A nice easy one for you..... I am totally new to sip and Linux so could someone give me the commands I need to install the rtpproxy? Any help appreciated. Luke.

2 1

[Users] failover
by Cseke Tamas 15 May '06

15 May '06

Hi, We'd like to make a failover system using openser, DNS SRV records seems like a good idea, for failover and load balancing. But it would be nice if, we could share or replicate SIP dialogs between opnser instances. UAs should send all messages to more proxys, and if one proxy die, the dialog should by handled by an other one. Example: -UA send an INVITE to proxy1 -proxy1 die -UA send the BYE at the end of the session to proy2, which could match this dialog, because it maintance the states of the dialogs too. Is is possible? Thanks! Tomi

5 7

[Serusers] auth_radius won't loaded
by Ericson Ferdinand Pasaribu 15 May '06

15 May '06

Hello, I'm trying to buld a system of SER with radius support. I use Redhat 9 and radiusclient-ng-0.5.2. In my system, I installed SER 0.9.5 and freeRADIUS 1.1.1. I was able installing all of them succesfully. After I configure SER to have the radius support, I get this error message when I try to start SER: 0(5071) ERROR: load_module: could not open module </usr/local/lib/ser/modules/auth_radius.so>: libradiusclient-ng.so.2: cannot open shared object file: No such file or directory 0(5071) parse error (32,13-14): failed to load module 0(5071) parse error (89,32-33): unknown command, missing loadmodule? I have checked the SER modules in my system, and there is auth_radius.so in /usr/local/lib/ser/modules. I also checked the libradiusclient library, and there is libradiusclient-ng.so.2 in /usr/local/lib. I don't know what's wrong with my system. Below is my ser.cfg file. Is there anybody that can give some help? # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) modparam("usrloc", "db_mode", 2) # -- auth params -- # modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") # #modparam("auth_db", "calculate_ha1", yes) # #modparam("auth_db", "password_column", "password") # # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("bohr.ee.net", "subscriber")) { www_challenge("bohr.ee.net", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; }

2 1

[Serusers] RE: IM + Presence help
by Suraj Kumar 15 May '06

15 May '06

Thanks Vaclav for the information as at one stage I thought my message was lost! Is that the user must need to be in the database? I though the user location in memory should work. Since my registration packet arrives fine and I can see the response to the REGISTER packets, I assume users are are in memory but I could not check from serctl command as I mentioned earlier. I will use the latest serctl but I would like to know if the database is absolutely must for the presence to work? Regards, Suraj ---------------------------------------------------------------------------------- Hi Suraj. Sorry for delayed reply. On Wed, May 03, 2006 at 11:10:32PM -0400, Suraj Kumar wrote: > Hi Vaclav, > > Thanks for the help! That helped!! > > However, when I registered two users from windows messanger, I can login but I cannot see them with the serctl ul show command which shows the following message : > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 500 Command 'ul_dump' not found > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Might be, that this command is still not implemented (it worked in older SER versions, but it was rewritten then and may be, that it was not reimplemented yet). May be, that new serctl (in tools/serctl in source tree) has another command which is similar to this. Try to look there. > > If i add a contact in the IM client, SER displays the following message: > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > subscription to invalid user sip:201@xxx.xxx.248.115 > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > I have used the config sample from the example with DB in the presence hand book: > but my user location is set as follows : > modparam("usrloc", "db_mode", 0) > There are used functions lookup_user and lookup_domain from modules uri_db and domain (I think) which work with database. The subscription probably fails due to that these functions can not find the user in database. Have you added this user using serctl? Vaclav > > Thanks a lot! > Suraj >

2 1

[Serusers] How to make ser with routing media stream record CDR.
by hlzhangxt 15 May '06

15 May '06

I Setup SER with Mediaproxy. I want to know how to config SER, so that SER can Record the CDR, especially the duration talking time. How to make ser record mediat connectiing time, media disconnectiing time, and duration?

1 0

Re: [Serusers] I have problem with my SERWEB version 0.9.4 (Installed on FC4) , with SER version is 0.9.6
by Karel Kozlik 15 May '06

15 May '06

pear-log package is not probably installed. If it is, see php log or apache error log. Karel Phuong Nguyen Trong napsal(a): > When I enable logging in serweb, and then, I try to access to SERweb home > page( http://mydomain.com/serweb/admin/index.php ). > There is a white page (It means that on screen don't have anything!). > But, when I disable logging, the "log in" web page is display OK. > Could you find any problems on this? > > Phuong Nguyen > IP Clients Group > ESCS Dept > TMA company. > http://www.tma.com.vn/ > -----Original Message----- > From: Karel Kozlik [mailto:karel@iptel.org] > Sent: Wednesday, April 19, 2006 12:31 PM > To: Phuong Nguyen Trong > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] I have problem with my SERWEB version 0.9.4 > (Installed on FC4) , with SER version is 0.9.6 > > Hi, > enable logging in serweb, set log level to debug and see the log file. > > Karel > > Phuong Nguyen Trong napsal(a): >> I try to install SERweb 0.9.4 is running with SER 0.9.6 ( Is it OK?) >> SER is running OK but I don't have software to test the connection is >> managed by SER. Anyone have software to test its? >> >> My major problem is: SERWeb is running OK with user. I can create, update, >> delete user using account of normal user. >> But I cannot access to admin mode using default username ( admin ) and >> default password ( heslo ). The phenomenon of error is: (Only one line to >> describe this error). >> Bad username or password >> Only one line to describe this error. >> I try to solve this problem rely on previous resolved similar problems in >> our mailing lists. But it still have this problem. >> Thanks a lot for any solution of this, >> >> Phuong Nguyen >> >> IP Clients Group >> ESCS Dept >> TMA company. >> http://www.tma.com.vn/ >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >

3 2

[Users] LCR (Least Cost Routing) Module
by Andrew And 14 May '06

14 May '06

I would want to know if with the LCR module I could to send more then 1 Invite to IPs destination? I have 2 or more possible OpenSER that could receive Invite with prefix XYZ, than could send a lot of INVITEs at the same time (fork to more than one Openser destination). Is this possible with LCR? If not possible how could I do this?

1 0

[Serusers] VM with SER and Asterisk
by ram 14 May '06

14 May '06

Hi all Does any one integrated Voice mail with Asterisk with SER I have SER running with some options of basic on the stage level to develop my application I would like to add Voice Services to SER So how can i integrate Voice mail option with SER ( not sending mail) Direct dialing some number and hear voices ram

1 0

[Serusers] serweb on Linux Suse 10 not responding !
by Americania .it 13 May '06

13 May '06

I've extract serweb directorys under /srv/www/htdocs (default dir for apache 2). I've created an alias for the path serweb/html . When I call the url on the browser as localhost/serweb localhost/serweb/html localhost/serweb/html/user/index.php localhost/serweb/user/index.php or instead of localhost The IP of the pc or the name of the pc I always get Access denied error Waht can I do ??

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users