- sr-users - kamailio.org

Re: [Users] How to use OpenSER?
by Bogdan-Andrei Iancu 16 Mar '06

16 Mar '06

Hi, see http://openser.org/dokuwiki/doku.php?id=installation and http://www.openser.org/docs/scripting.html regards, bogdan Brijesh wrote: > Hi all, > > I am new to OpenSER. Can anyone help me in using OpenSER? I have > already tried method written in site of OpenSER for using it. I don’t > know how to use it. I have one sip client application on Linux. Can > anyone tell me exact steps to be performed in order to use OpenSER? > > Thanx in Advance > > Brijesh > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Users] not able to get the rtp port UAC behind NAT
by Vikram Sarathy 16 Mar '06

16 Mar '06

hi, i have my sip proxy in public ip and my UAC is behind NAT. i am not able to hear voice. when i tested the packets i came to know its due to mismatch of rtp ports. how to know the rtp ports when UAC is behind NAT. with regards vicky

2 1

[Users] active call
by unplug 16 Mar '06

16 Mar '06

Hi, How can I know the list of active call in the system? Any information related available in DB? Thanks, unplug

2 1

[Serusers] acc.so & auth_radius.so compile error?
by KaiFu Chan 16 Mar '06

16 Mar '06

Hi all, I followed the steps which wrote on "SIP Express Router RADIUS HOWTO", but it did not work. When I make install, the acc and auth_radius have some error! I have try ser 0.8.14 & 0.9.4 & 0.9.6, all of them are the same. Could you give me some advices? Thank you. Caxton

1 0

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Should I register users on ser ? Can I register them on another server ? I didn't understand this: is the config file for only presence ? is it not enabling sip registers and/or users to have audio conversation ? What configuration should I make on the client to use your sample config ? Username, password , domain (sip proxy), subscribe to contact list address ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, March 16, 2006 3:23 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support Do you register users for test-domain.com and use SER machine as outgoing proxy? As I said, this was only testing config file (for playing with presence). I think, that they have no passwords. You can set them using serctl (see help for serctl). Vaclav On Thu, Mar 16, 2006 at 03:03:01PM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > I get the following results with your suggested commands: > mysql> GRANT ALL ON ser.* TO 'ser'@'127.0.0.1' IDENTIFIED BY 'heslo'; > Query OK, 0 rows affected (0.00 sec) > > mysql> GRANT ALL ON ser.* TO 'ser'@'localhost' IDENTIFIED BY 'heslo'; > Query OK, 0 rows affected (0.00 sec) > > So no rows are affected ? > > Btw, if I change all 127.0.0.1 with "localhost" on cfg file, Ser starts successfully. > > This time I couldn't register my client. When I get tcpdump traces I see the error 483 "too many hops" > Btw, which password should I use with my users ? > Your dbinit script creates some users but what are their passwords ? > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, March 16, 2006 2:42 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > You have probably badly set privileges in database. Try to tun > > GRANT ALL ON ser.* TO 'ser'@'localhost' IDENTIFIED BY 'heslo'; > > or > > GRANT ALL ON ser.* TO 'ser'@'127.0.0.1' IDENTIFIED BY 'heslo'; > > or something like that in mysql (you must be root for that) and try it again. > > Vaclav > > On Thu, Mar 16, 2006 at 02:13:35PM +0200, ?lker Aktuna (Koç.net) wrote: > > I can login with: > > # mysql -P 3306 -user -pheslo ser > > > > but I can't login with: > > # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser > > > > ________________________________ > > > > From: ?lker Aktuna (Koç.net) > > Sent: Thursday, March 16, 2006 2:11 PM > > To: 'Vaclav Kubart' > > Cc: serusers(a)lists.iptel.org > > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > > > > > I got the folowing error: > > > > # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser ERROR 1045: Access > > denied for user: 'ser(a)asterisk1.local' (Using password: YES) > > > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Thursday, March 16, 2006 1:58 PM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > Are you able to work with ser database using mysql like this? > > > > mysql -h 127.0.0.1 -P 3306 -user -pheslo ser > > > > You can try to increase debug level in SER's config file (debug=4) and see messages in log. > > > > Vaclav > > > > > > On Thu, Mar 16, 2006 at 01:36:20PM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > Thanks; I did it that way and now the server starts but then exits. > > > I see the following lines in my /var/log/messages file: > > > > > > Mar 16 13:26:33 asterisk1 ./ser[19374]: new_connection: Access > > > denied for user: 'ser(a)asterisk1.local' (Using password: YES) Mar > > > 16 > > > 13:26:33 > > > asterisk1 ./ser[19374]: uri_db:mod_init: Unable to open database > > > connection Mar 16 13:26:33 asterisk1 ./ser[19374]: init_mod(): > > > Error while initializing module uri_db > > > > > > However, I can login to mysql db by user ser/heslo. > > > Where might be the problem ? > > > > > > Thanks, > > > ilker <http://271570.sigclick.mailinfo.com/sigclick/0701000C/06094B0A/04064D0B/256…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Hi, I get the following results with your suggested commands: mysql> GRANT ALL ON ser.* TO 'ser'@'127.0.0.1' IDENTIFIED BY 'heslo'; Query OK, 0 rows affected (0.00 sec) mysql> GRANT ALL ON ser.* TO 'ser'@'localhost' IDENTIFIED BY 'heslo'; Query OK, 0 rows affected (0.00 sec) So no rows are affected ? Btw, if I change all 127.0.0.1 with "localhost" on cfg file, Ser starts successfully. This time I couldn't register my client. When I get tcpdump traces I see the error 483 "too many hops" Btw, which password should I use with my users ? Your dbinit script creates some users but what are their passwords ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, March 16, 2006 2:42 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support You have probably badly set privileges in database. Try to tun GRANT ALL ON ser.* TO 'ser'@'localhost' IDENTIFIED BY 'heslo'; or GRANT ALL ON ser.* TO 'ser'@'127.0.0.1' IDENTIFIED BY 'heslo'; or something like that in mysql (you must be root for that) and try it again. Vaclav On Thu, Mar 16, 2006 at 02:13:35PM +0200, ?lker Aktuna (Koç.net) wrote: > I can login with: > # mysql -P 3306 -user -pheslo ser > > but I can't login with: > # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser > > ________________________________ > > From: ?lker Aktuna (Koç.net) > Sent: Thursday, March 16, 2006 2:11 PM > To: 'Vaclav Kubart' > Cc: serusers(a)lists.iptel.org > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > I got the folowing error: > > # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser ERROR 1045: Access > denied for user: 'ser(a)asterisk1.local' (Using password: YES) > > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, March 16, 2006 1:58 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > Are you able to work with ser database using mysql like this? > > mysql -h 127.0.0.1 -P 3306 -user -pheslo ser > > You can try to increase debug level in SER's config file (debug=4) and see messages in log. > > Vaclav > > > On Thu, Mar 16, 2006 at 01:36:20PM +0200, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Thanks; I did it that way and now the server starts but then exits. > > I see the following lines in my /var/log/messages file: > > > > Mar 16 13:26:33 asterisk1 ./ser[19374]: new_connection: Access > > denied for user: 'ser(a)asterisk1.local' (Using password: YES) Mar 16 > > 13:26:33 > > asterisk1 ./ser[19374]: uri_db:mod_init: Unable to open database > > connection Mar 16 13:26:33 asterisk1 ./ser[19374]: init_mod(): Error > > while initializing module uri_db > > > > However, I can login to mysql db by user ser/heslo. > > Where might be the problem ? > > > > Thanks, > > ilker <http://271570.sigclick.mailinfo.com/sigclick/06020704/01054B09/040C4A03/145…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

I can login with: # mysql -P 3306 -user -pheslo ser but I can't login with: # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser ________________________________ From: İlker Aktuna (Koç.net) Sent: Thursday, March 16, 2006 2:11 PM To: 'Vaclav Kubart' Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Problem starting SER with Presence support I got the folowing error: # mysql -h 127.0.0.1 -P 3306 -user -pheslo ser ERROR 1045: Access denied for user: 'ser(a)asterisk1.local' (Using password: YES) -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, March 16, 2006 1:58 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support Are you able to work with ser database using mysql like this? mysql -h 127.0.0.1 -P 3306 -user -pheslo ser You can try to increase debug level in SER's config file (debug=4) and see messages in log. Vaclav On Thu, Mar 16, 2006 at 01:36:20PM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > Thanks; I did it that way and now the server starts but then exits. > I see the following lines in my /var/log/messages file: > > Mar 16 13:26:33 asterisk1 ./ser[19374]: new_connection: Access denied > for user: 'ser(a)asterisk1.local' (Using password: YES) Mar 16 13:26:33 > asterisk1 ./ser[19374]: uri_db:mod_init: Unable to open database > connection Mar 16 13:26:33 asterisk1 ./ser[19374]: init_mod(): Error > while initializing module uri_db > > However, I can login to mysql db by user ser/heslo. > Where might be the problem ? > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, March 16, 2006 11:10 AM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > That config file is for last CVS version - do you realy have it? Try download at least that one from yesterday's evening and run: > > make install include_modules="pa mysql dialog rls fifo xmlrpc presence_b2b" > > And you need to modify paths to modules in the config file! > > Vaclav > > On Thu, Mar 16, 2006 at 10:50:04AM +0200, ?lker Aktuna (Koç.net) wrote: > > Ok, I installed the MySQL-python package. Then initdb script run fine. > > But this time I have the following error when starting ser: > > > > [root@asterisk1 sip_router]# /root/ser/sbin/ser -c > > 0(13176) set_mod_param_regex: parameter > > <handle_presence_subscriptions> not found in module <presence_b2b> > > 0(13176) parse error (127,19-20): Can't set module parameter > > 0(13176) parse error (203,34-35): unknown command, missing loadmodule? > > > > 0(13176) parse error (208,30-31): unknown command, missing loadmodule? > > > > 0(13176) parse error (213,25-26): unknown command, missing loadmodule? > > > > 0(13176) parse error (216,30-31): unknown command, missing loadmodule? > > > > ERROR: bad config file (5 errors) > > > > > > what's wrong with my presence_b2b module ? > > > > Thanks, > > ilker > > > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Thursday, March 16, 2006 10:26 AM > > To: Vaclav Kubart > > Cc: serusers(a)lists.iptel.org > > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > > > > > Hi, > > > > Thanks for the files. When I run the initdb script I have the following errors. > > I guess that I need python-mysqldb. Where can I find this ? > > (I never used python before) > > > > Is that package the required one : MySQL-python 0.9.1-6.i386 ? > > > > # ./initdb.sh > > ser_domain: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Thursday, March 16, 2006 9:45 AM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > There is my testing config file. It needs to have some users stored > > in database (I attach my script which adds initialization data using > > serctl). You can try to look on it and modify it according your > > needs (change paths to modules, ...) > > > > Vaclav > > > > > > On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > Is there any working configuration sample for Ser with presence ? > > > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > Sent: Wednesday, March 15, 2006 6:11 PM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > > > Hello, > > > mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). > > > > > > Presence handbook is a bit out of date, but in few days there will be new version - please be patient. > > > > > > Vaclav > > > > > > On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > > > > Hi, > > > > > > > > Thanks for the presence book. I am reading it now. But I think I > > > > also need scripts for creating needed tables in Mysql. I > > > > couldn't find anywhere scripts for mysql. There is a "make dbinstall" > > > > command in cvs release but that didn't produce the expected result. > > > > > > > > Btw, I just compiled cvs version again and tried the cfg file > > > > example in the presence book at > > > > ftp://ftp.iptel.org/pub/ser/presence/ This cfg example still has > > > > the fifo="/tmp/ser_fifo" in it and I still get the same parse error. > > > > > > > > Any help on this ? > > > > > > > > Thanks, > > > > ilker > > > > > > > > -----Original Message----- > > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > > Sent: Wednesday, March 15, 2006 8:37 AM > > > > To: ?lker Aktuna (Koç.net) > > > > Cc: serusers(a)lists.iptel.org > > > > Subject: Re: [Serusers] Problem starting SER with Presence > > > > support > > > > > > > > Hi, > > > > I am responsible for presence server in ser. > > > > > > > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. > > > > > > > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > > > > > > > Vaclav > > > > > > > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > > > > > > > On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > > > > > Hi again, > > > > > > > > > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > > > > > How can I contact the developers ? (serdev(a)lists.iptel.org does not > > > > > accept my emails) > > > > > > > > > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > > > > > > > > > I am desperately trying to build some presence server. Please help me... > > > > > > > > > > Thanks, > > > > > ilker > > > > > > > > > > > > > > > ________________________________ > > > > > > > > > > From: serusers-bounces(a)lists.iptel.org > > > > > [mailto:serusers-bounces@lists.iptel.org] > > > > > On Behalf Of ?lker Aktuna (Koç.net) > > > > > Sent: Tuesday, March 14, 2006 9:12 AM > > > > > To: serusers(a)lists.iptel.org > > > > > Subject: [Serusers] Problem starting SER with Presence support > > > > > > > > > > > > > > > Hi everyone, > > > > > > > > > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > > > > > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > > > > > sip_router > > > > > > > > > > I have libxml2 installed and the sources compile fine. > > > > > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > > > > > > > > > Unfortunately ser does not start with the following error: > > > > > > > > > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > > > > > /root/ser/etc/ser/ser.cfg > > > > > 0(28118) parse error (11,1-5): syntax error > > > > > 0(28118) parse error (11,1-5): > > > > > ERROR: bad config file (2 errors) > > > > > > > > > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > > > > > > > > > # ls -adl /tmp/ > > > > > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > > > > > > > > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > > > > > > > > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > > > > > fifo=/tmp/ser_fifo in your config > > > > > > > > > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > > > > > > > > > Thanks, > > > > > ilker > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03030702/0401490A/010C4A05/214…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Re: starting ser
by Andrey Kouprianov 16 Mar '06

16 Mar '06

Again we'll need your log dump... Please, send one.. Did you initialize MySQL database with "mysql_install_db" command? Is your MySQL server running (try using mysql client to connect to database or use "ps -ax | grep mysql" to check)? Is your MySQL db directory's ownership set to mysql user and mysql group (you can check with "ls -l /var/db/" command). Versions above 4.x should set ownership automatically. Did you create ser database with "ser_mysql.sh create" command? Did you finally export SIP_DOMAIN="yourdomain.com"? On 3/16/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > Have tried to launch again ser but still have this answer > > PID file /var/run/ser.pid does not exist - SER start failed > > Any thought about solution? > thanks > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: giovedì 16 marzo 2006 10.48 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: R: R: R: R: [Serusers] Re: > > Sorry, but I have no idea... I used Fedora Core 4, when installing new > glib... I simply downloaded RPM and ran it. It updated to the newer > version w/o problem. > > > > On 3/16/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > Hi, sorry for stupid question but I can't solve this problem... > > > > I'm trying to install glibc as needed by MySql but when I try to configure he said me I have to configure it in a separate build directory. Source code is on glibc-2.3... dir and I create a new glibc-build directory. I've tried to launch > > > > ./configure --prefix=/opt/glibc-build > > > > but nothing. > > > > Where is the mistake? > > Thank you > > > > -----Messaggio originale----- > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > Inviato: mercoledì 15 marzo 2006 16.22 > > A: serusers(a)lists.iptel.org > > Oggetto: Re: R: R: R: R: [Serusers] Re: > > > > you mean missing libraries? that's normal... just download missing > > library RPM's.. might take long though :(... Last time I tried > > installing some small program on Fedora, i has to search up 20 or so > > libraries before I could actually finish installation. > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > I have a red hat ES. > > > > > > Get Mysql.4.1 from web site, try to install and he gives a lot of library... > > > > > > -----Messaggio originale----- > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > Inviato: mercoledì 15 marzo 2006 16.01 > > > A: serusers(a)lists.iptel.org > > > Oggetto: Re: R: R: R: [Serusers] Re: > > > > > > i have no idea how to do that.. sorry... just try installing into the > > > same directory as before... what OS are you using btw? better install > > > from packages... > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > How can I remove a tar.gz installation? > > > > > > > > -----Messaggio originale----- > > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > > Inviato: mercoledì 15 marzo 2006 15.36 > > > > A: serusers(a)lists.iptel.org > > > > Oggetto: Re: R: R: [Serusers] Re: > > > > > > > > I guess, MySQL server has to be installed, because SER will use a > > > > default MySQL database to store accound info... anyway, your error > > > > clearly shows, that SER needs MySQL server running... I suggest > > > > installing 4.1... > > > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > > i can use ser only if mysql is installed? > > > > > > > > > > Have you senn my ser.cfg file? What do you think? > > > > > > > > > > Thanks for help me > > > > > > > > > > -----Messaggio originale----- > > > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > > > Inviato: mercoledì 15 marzo 2006 15.26 > > > > > A: serusers(a)lists.iptel.org > > > > > Oggetto: Re: R: [Serusers] Re: > > > > > > > > > > is you MySQL server running... seems that it's not... > > > > > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > > > I've tried to add a new user with the command <serctl add> and, after > > > > > > password (standard shoul be heslo) receive this error: > > > > > > > > > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > > > > > /mysql/mysql.sock' (111) > > > > > > Error: 400; check if you use aliases in SER > > > > > > > > > > > > Please help me > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > serusers(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Hi, Thanks; I did it that way and now the server starts but then exits. I see the following lines in my /var/log/messages file: Mar 16 13:26:33 asterisk1 ./ser[19374]: new_connection: Access denied for user: 'ser(a)asterisk1.local' (Using password: YES) Mar 16 13:26:33 asterisk1 ./ser[19374]: uri_db:mod_init: Unable to open database connection Mar 16 13:26:33 asterisk1 ./ser[19374]: init_mod(): Error while initializing module uri_db However, I can login to mysql db by user ser/heslo. Where might be the problem ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org <mailto:vaclav.kubart@iptel.org> ] Sent: Thursday, March 16, 2006 11:10 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support That config file is for last CVS version - do you realy have it? Try download at least that one from yesterday's evening and run: make install include_modules="pa mysql dialog rls fifo xmlrpc presence_b2b" And you need to modify paths to modules in the config file! Vaclav On Thu, Mar 16, 2006 at 10:50:04AM +0200, ?lker Aktuna (Koç.net) wrote: > Ok, I installed the MySQL-python package. Then initdb script run fine. > But this time I have the following error when starting ser: > > [root@asterisk1 sip_router]# /root/ser/sbin/ser -c > 0(13176) set_mod_param_regex: parameter > <handle_presence_subscriptions> not found in module <presence_b2b> > 0(13176) parse error (127,19-20): Can't set module parameter > 0(13176) parse error (203,34-35): unknown command, missing loadmodule? > > 0(13176) parse error (208,30-31): unknown command, missing loadmodule? > > 0(13176) parse error (213,25-26): unknown command, missing loadmodule? > > 0(13176) parse error (216,30-31): unknown command, missing loadmodule? > > ERROR: bad config file (5 errors) > > > what's wrong with my presence_b2b module ? > > Thanks, > ilker > > > ________________________________ > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org <mailto:serusers-bounces@lists.iptel.org> ] > On Behalf Of ?lker Aktuna (Koç.net) > Sent: Thursday, March 16, 2006 10:26 AM > To: Vaclav Kubart > Cc: serusers(a)lists.iptel.org > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > Hi, > > Thanks for the files. When I run the initdb script I have the following errors. > I guess that I need python-mysqldb. Where can I find this ? > (I never used python before) > > Is that package the required one : MySQL-python 0.9.1-6.i386 ? > > # ./initdb.sh > ser_domain: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org <mailto:vaclav.kubart@iptel.org> ] > Sent: Thursday, March 16, 2006 9:45 AM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > There is my testing config file. It needs to have some users stored in > database (I attach my script which adds initialization data using > serctl). You can try to look on it and modify it according your needs > (change paths to modules, ...) > > Vaclav > > > On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Is there any working configuration sample for Ser with presence ? > > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org <mailto:vaclav.kubart@iptel.org> ] > > Sent: Wednesday, March 15, 2006 6:11 PM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > Hello, > > mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). > > > > Presence handbook is a bit out of date, but in few days there will be new version - please be patient. > > > > Vaclav > > > > On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > Thanks for the presence book. I am reading it now. But I think I > > > also need scripts for creating needed tables in Mysql. I couldn't > > > find anywhere scripts for mysql. There is a "make dbinstall" > > > command in cvs release but that didn't produce the expected result. > > > > > > Btw, I just compiled cvs version again and tried the cfg file > > > example in the presence book at > > > ftp://ftp.iptel.org/pub/ser/presence/ <ftp://ftp.iptel.org/pub/ser/presence/> This cfg example still has > > > the fifo="/tmp/ser_fifo" in it and I still get the same parse error. > > > > > > Any help on this ? > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org <mailto:vaclav.kubart@iptel.org> ] > > > Sent: Wednesday, March 15, 2006 8:37 AM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > > > Hi, > > > I am responsible for presence server in ser. > > > > > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence <ftp://ftp.iptel.org/pub/ser/presence> . > > > > > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > > > > > Vaclav > > > > > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > > > <http://271570.sigclick.mailinfo.com/sigclick/02060104/05014A01/00074C03/901…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

Re: [Serusers] Problem starting SER with Presence support
by Vaclav Kubart 16 Mar '06

16 Mar '06

Are you able to work with ser database using mysql like this? mysql -h 127.0.0.1 -P 3306 -user -pheslo ser You can try to increase debug level in SER's config file (debug=4) and see messages in log. Vaclav On Thu, Mar 16, 2006 at 01:36:20PM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > Thanks; I did it that way and now the server starts but then exits. > I see the following lines in my /var/log/messages file: > > Mar 16 13:26:33 asterisk1 ./ser[19374]: new_connection: Access denied for user: 'ser(a)asterisk1.local' (Using password: YES) > Mar 16 13:26:33 asterisk1 ./ser[19374]: uri_db:mod_init: Unable to open database connection > Mar 16 13:26:33 asterisk1 ./ser[19374]: init_mod(): Error while initializing module uri_db > > However, I can login to mysql db by user ser/heslo. > Where might be the problem ? > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, March 16, 2006 11:10 AM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > That config file is for last CVS version - do you realy have it? Try download at least that one from yesterday's evening and run: > > make install include_modules="pa mysql dialog rls fifo xmlrpc presence_b2b" > > And you need to modify paths to modules in the config file! > > Vaclav > > On Thu, Mar 16, 2006 at 10:50:04AM +0200, ?lker Aktuna (Koç.net) wrote: > > Ok, I installed the MySQL-python package. Then initdb script run fine. > > But this time I have the following error when starting ser: > > > > [root@asterisk1 sip_router]# /root/ser/sbin/ser -c > > 0(13176) set_mod_param_regex: parameter > > <handle_presence_subscriptions> not found in module <presence_b2b> > > 0(13176) parse error (127,19-20): Can't set module parameter > > 0(13176) parse error (203,34-35): unknown command, missing loadmodule? > > > > 0(13176) parse error (208,30-31): unknown command, missing loadmodule? > > > > 0(13176) parse error (213,25-26): unknown command, missing loadmodule? > > > > 0(13176) parse error (216,30-31): unknown command, missing loadmodule? > > > > ERROR: bad config file (5 errors) > > > > > > what's wrong with my presence_b2b module ? > > > > Thanks, > > ilker > > > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Thursday, March 16, 2006 10:26 AM > > To: Vaclav Kubart > > Cc: serusers(a)lists.iptel.org > > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > > > > > Hi, > > > > Thanks for the files. When I run the initdb script I have the following errors. > > I guess that I need python-mysqldb. Where can I find this ? > > (I never used python before) > > > > Is that package the required one : MySQL-python 0.9.1-6.i386 ? > > > > # ./initdb.sh > > ser_domain: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_user: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > ser_uri: No module named MySQLdb: ImportError > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Thursday, March 16, 2006 9:45 AM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > There is my testing config file. It needs to have some users stored in > > database (I attach my script which adds initialization data using > > serctl). You can try to look on it and modify it according your needs > > (change paths to modules, ...) > > > > Vaclav > > > > > > On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > Is there any working configuration sample for Ser with presence ? > > > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > Sent: Wednesday, March 15, 2006 6:11 PM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > > > Hello, > > > mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). > > > > > > Presence handbook is a bit out of date, but in few days there will be new version - please be patient. > > > > > > Vaclav > > > > > > On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > > > > Hi, > > > > > > > > Thanks for the presence book. I am reading it now. But I think I > > > > also need scripts for creating needed tables in Mysql. I couldn't > > > > find anywhere scripts for mysql. There is a "make dbinstall" > > > > command in cvs release but that didn't produce the expected result. > > > > > > > > Btw, I just compiled cvs version again and tried the cfg file > > > > example in the presence book at > > > > ftp://ftp.iptel.org/pub/ser/presence/ This cfg example still has > > > > the fifo="/tmp/ser_fifo" in it and I still get the same parse error. > > > > > > > > Any help on this ? > > > > > > > > Thanks, > > > > ilker > > > > > > > > -----Original Message----- > > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > > Sent: Wednesday, March 15, 2006 8:37 AM > > > > To: ?lker Aktuna (Koç.net) > > > > Cc: serusers(a)lists.iptel.org > > > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > > > > > Hi, > > > > I am responsible for presence server in ser. > > > > > > > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. > > > > > > > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > > > > > > > Vaclav > > > > > > > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > > > > > > > On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > > > > > Hi again, > > > > > > > > > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > > > > > How can I contact the developers ? (serdev(a)lists.iptel.org does not > > > > > accept my emails) > > > > > > > > > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > > > > > > > > > I am desperately trying to build some presence server. Please help me... > > > > > > > > > > Thanks, > > > > > ilker > > > > > > > > > > > > > > > ________________________________ > > > > > > > > > > From: serusers-bounces(a)lists.iptel.org > > > > > [mailto:serusers-bounces@lists.iptel.org] > > > > > On Behalf Of ?lker Aktuna (Koç.net) > > > > > Sent: Tuesday, March 14, 2006 9:12 AM > > > > > To: serusers(a)lists.iptel.org > > > > > Subject: [Serusers] Problem starting SER with Presence support > > > > > > > > > > > > > > > Hi everyone, > > > > > > > > > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > > > > > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > > > > > sip_router > > > > > > > > > > I have libxml2 installed and the sources compile fine. > > > > > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > > > > > > > > > Unfortunately ser does not start with the following error: > > > > > > > > > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > > > > > /root/ser/etc/ser/ser.cfg > > > > > 0(28118) parse error (11,1-5): syntax error > > > > > 0(28118) parse error (11,1-5): > > > > > ERROR: bad config file (2 errors) > > > > > > > > > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > > > > > > > > > # ls -adl /tmp/ > > > > > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > > > > > > > > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > > > > > > > > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > > > > > fifo=/tmp/ser_fifo in your config > > > > > > > > > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > > > > > > > > > Thanks, > > > > > ilker > > > > > > > > > > > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > ________________________________________________________________ > > > > > __ __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > _ > > > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/ > > > > > 09 > > > > > 01 > > > > > 4E > > > > > 06/91124912.jpg> > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > ________________________________________________________________ > > > > > __ __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > ________________________________________________________________ > > > > > __ > > > > > __ > > > > > __ > > > > > _ > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > serusers(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/06050304/01044D03/0D > > > > 06 > > > > 4E > > > > 03/44221641.jpg> > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > _ > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0605030D/06094A05/0D04 > > > 4E > > > 0A/24228196.jpg> > > > ____________________________________________________________________ > > > __ > > > ____________________________________________________________________ > > > __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > ____________________________________________________________________ > > > __ > > > ____________________________________________________________________ > > > __ > > > _ > > > > > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060204/0302480A/01004F > > 03/21131424.jpg> > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03020104/0E024800/01004C03/815…> > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] Quintum Tenor ASM200 and Ser Sip Server
by elias 16 Mar '06

16 Mar '06

Dear Tobias, Am configuring tenor ASM200 to use my Ser Sip server but the unit cannot register. Can you please offer any configuration guide? Thanking you in advance. Kind regards. Elias.

1 0

[Users] How to use OpenSER?
by Brijesh 16 Mar '06

16 Mar '06

Hi all, I am new to OpenSER. Can anyone help me in using OpenSER? I have already tried method written in site of OpenSER for using it. I don't know how to use it. I have one sip client application on Linux. Can anyone tell me exact steps to be performed in order to use OpenSER? Thanx in Advance Brijesh

1 0

[Users] Something wrong with the CVS?
by Teemu Harju 16 Mar '06

16 Mar '06

Hi, Since yesterday I've been trying to download openser from the CVS, but I haven't been successfull. This is what I get... Logging in to :pserver:anonymous@cvs.sourceforge.net:2401/cvsroot/openser CVS password: cvs [login aborted]: unrecognized auth response from cvs.sourceforge.net: M -!- Client or Server timeout occurred! Also the link to the CVS on the openser.org website is giving...* "Error reading from remote server". Anyone else having similar problems or am I doing something wrong here? I'd just really need the CVS version of the usrloc module. Regards, Teemu*** -- Teemu Harju http://www.teemuharju.net

3 3

Re: R: R: R: R: R: [Serusers] Re:
by Andrey Kouprianov 16 Mar '06

16 Mar '06

Sorry, but I have no idea... I used Fedora Core 4, when installing new glib... I simply downloaded RPM and ran it. It updated to the newer version w/o problem. On 3/16/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > Hi, sorry for stupid question but I can't solve this problem... > > I'm trying to install glibc as needed by MySql but when I try to configure he said me I have to configure it in a separate build directory. Source code is on glibc-2.3... dir and I create a new glibc-build directory. I've tried to launch > > ./configure --prefix=/opt/glibc-build > > but nothing. > > Where is the mistake? > Thank you > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 16.22 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: R: R: R: [Serusers] Re: > > you mean missing libraries? that's normal... just download missing > library RPM's.. might take long though :(... Last time I tried > installing some small program on Fedora, i has to search up 20 or so > libraries before I could actually finish installation. > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > I have a red hat ES. > > > > Get Mysql.4.1 from web site, try to install and he gives a lot of library... > > > > -----Messaggio originale----- > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > Inviato: mercoledì 15 marzo 2006 16.01 > > A: serusers(a)lists.iptel.org > > Oggetto: Re: R: R: R: [Serusers] Re: > > > > i have no idea how to do that.. sorry... just try installing into the > > same directory as before... what OS are you using btw? better install > > from packages... > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > How can I remove a tar.gz installation? > > > > > > -----Messaggio originale----- > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > Inviato: mercoledì 15 marzo 2006 15.36 > > > A: serusers(a)lists.iptel.org > > > Oggetto: Re: R: R: [Serusers] Re: > > > > > > I guess, MySQL server has to be installed, because SER will use a > > > default MySQL database to store accound info... anyway, your error > > > clearly shows, that SER needs MySQL server running... I suggest > > > installing 4.1... > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > i can use ser only if mysql is installed? > > > > > > > > Have you senn my ser.cfg file? What do you think? > > > > > > > > Thanks for help me > > > > > > > > -----Messaggio originale----- > > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > > Inviato: mercoledì 15 marzo 2006 15.26 > > > > A: serusers(a)lists.iptel.org > > > > Oggetto: Re: R: [Serusers] Re: > > > > > > > > is you MySQL server running... seems that it's not... > > > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > > I've tried to add a new user with the command <serctl add> and, after > > > > > password (standard shoul be heslo) receive this error: > > > > > > > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > > > > /mysql/mysql.sock' (111) > > > > > Error: 400; check if you use aliases in SER > > > > > > > > > > Please help me > > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Users] Authentication and Password encryption using dbtext
by Istvan Hubay Cebrian 16 Mar '06

16 Mar '06

Hi, I am currently deploying OpenSER v1.0 on a Linksys WRT54GS router ( www.milkfish.org ). I have read through all available documentation concerning authentication and dbtext and I have configured OpenSER such that an MD5 hash string is stored in the subscribers file. However (and this may-be specific to milkfish) the password was also always being stored as text. After editing and removing the parameter that stored the password as text in 'dbtextctl' authentication no longer works. This IMHO is because the UA is sending the password as text which is then being compared to the MD5 hash string, this test obviously fails. One solution would be to receive the password as text, then construct the MD5 hash string then compare, however I don't know how to do this. I have looked through openser.cfg but I can't seem to make heads or tails of (particularly the www_authorize and challenge part): if (method=="REGISTER") { if (uri==myself) { #wants to register only at router, no external SIP provider #log(1, "internal REGISTER\n"); #make entry at local registrar if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }; save("location"); } else { #wants to register at external SIP provider #log(1, "external REGISTER\n"); #check if user is already registered at internal registrar if (!lookup("location")) { #if not do a drive-by registration #for registration at internal registrar #without a reply save_noreply("location"); }; #Fixing of private address in contact hf fix_nated_contact("217.189.167.187"); route(1); }; return; }; If anyone could explain what is happening above, or how I could accomplish what I need (in which username, password and realm are received and an MD5 hash string is constructed) I would be much appreciated. Regards, Istvan -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 14-03-2006

3 3

[Serusers] UA behind NAT puts public IP in Contact, Via - help
by Arek Bekiersz 16 Mar '06

16 Mar '06

Hi, Few days ago I presented UA that sends public IP in "Contact" and "Via" HF, when it is behind NAT. It is in private LAN but it learns its public IP and every subsequent SIP request will contain it. It ruins NAT traversal effort, inluding nathelper + rtpproxy. I cannot properly detect NAT-ed user neither by "Via" nor "Contact" check. As a result people with various modems get angry and are reporting to me all those "I have no audio" problems. Or they cannot even register at all, if they have particularly stupid NAT. What is your advice? Vendor knows about issue but doesn't see problem. Of course I can enable NAT traversal by "User-Agent" HF check, but 90% of those UAs are NOT behind NAT... -- Regards, Arek Bekiersz

1 0

Re: [Serusers] Problem starting SER with Presence support
by Vaclav Kubart 16 Mar '06

16 Mar '06

That config file is for last CVS version - do you realy have it? Try download at least that one from yesterday's evening and run: make install include_modules="pa mysql dialog rls fifo xmlrpc presence_b2b" And you need to modify paths to modules in the config file! Vaclav On Thu, Mar 16, 2006 at 10:50:04AM +0200, ?lker Aktuna (Koç.net) wrote: > Ok, I installed the MySQL-python package. Then initdb script run fine. > But this time I have the following error when starting ser: > > [root@asterisk1 sip_router]# /root/ser/sbin/ser -c > 0(13176) set_mod_param_regex: parameter <handle_presence_subscriptions> not found in module <presence_b2b> > 0(13176) parse error (127,19-20): Can't set module parameter > 0(13176) parse error (203,34-35): unknown command, missing loadmodule? > > 0(13176) parse error (208,30-31): unknown command, missing loadmodule? > > 0(13176) parse error (213,25-26): unknown command, missing loadmodule? > > 0(13176) parse error (216,30-31): unknown command, missing loadmodule? > > ERROR: bad config file (5 errors) > > > what's wrong with my presence_b2b module ? > > Thanks, > ilker > > > ________________________________ > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of ?lker Aktuna (Koç.net) > Sent: Thursday, March 16, 2006 10:26 AM > To: Vaclav Kubart > Cc: serusers(a)lists.iptel.org > Subject: RE: [Serusers] Problem starting SER with Presence support > > > > Hi, > > Thanks for the files. When I run the initdb script I have the following errors. > I guess that I need python-mysqldb. Where can I find this ? > (I never used python before) > > Is that package the required one : MySQL-python 0.9.1-6.i386 ? > > # ./initdb.sh > ser_domain: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_user: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > ser_uri: No module named MySQLdb: ImportError > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Thursday, March 16, 2006 9:45 AM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > There is my testing config file. It needs to have some users stored in database (I attach my script which adds initialization data using serctl). You can try to look on it and modify it according your needs (change paths to modules, ...) > > Vaclav > > > On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Is there any working configuration sample for Ser with presence ? > > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Wednesday, March 15, 2006 6:11 PM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > Hello, > > mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). > > > > Presence handbook is a bit out of date, but in few days there will be new version - please be patient. > > > > Vaclav > > > > On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi, > > > > > > Thanks for the presence book. I am reading it now. But I think I > > > also need scripts for creating needed tables in Mysql. I couldn't > > > find anywhere scripts for mysql. There is a "make dbinstall" > > > command in cvs release but that didn't produce the expected result. > > > > > > Btw, I just compiled cvs version again and tried the cfg file > > > example in the presence book at > > > ftp://ftp.iptel.org/pub/ser/presence/ This cfg example still has the > > > fifo="/tmp/ser_fifo" in it and I still get the same parse error. > > > > > > Any help on this ? > > > > > > Thanks, > > > ilker > > > > > > -----Original Message----- > > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > > Sent: Wednesday, March 15, 2006 8:37 AM > > > To: ?lker Aktuna (Koç.net) > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > > > Hi, > > > I am responsible for presence server in ser. > > > > > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. > > > > > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > > > > > Vaclav > > > > > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > > > > > On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > > > > Hi again, > > > > > > > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > > > > How can I contact the developers ? (serdev(a)lists.iptel.org does not > > > > accept my emails) > > > > > > > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > > > > > > > I am desperately trying to build some presence server. Please help me... > > > > > > > > Thanks, > > > > ilker > > > > > > > > > > > > ________________________________ > > > > > > > > From: serusers-bounces(a)lists.iptel.org > > > > [mailto:serusers-bounces@lists.iptel.org] > > > > On Behalf Of ?lker Aktuna (Koç.net) > > > > Sent: Tuesday, March 14, 2006 9:12 AM > > > > To: serusers(a)lists.iptel.org > > > > Subject: [Serusers] Problem starting SER with Presence support > > > > > > > > > > > > Hi everyone, > > > > > > > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > > > > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > > > > sip_router > > > > > > > > I have libxml2 installed and the sources compile fine. > > > > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > > > > > > > Unfortunately ser does not start with the following error: > > > > > > > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > > > > /root/ser/etc/ser/ser.cfg > > > > 0(28118) parse error (11,1-5): syntax error > > > > 0(28118) parse error (11,1-5): > > > > ERROR: bad config file (2 errors) > > > > > > > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > > > > > > > # ls -adl /tmp/ > > > > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > > > > > > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > > > > > > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > > > > fifo=/tmp/ser_fifo in your config > > > > > > > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > > > > > > > Thanks, > > > > ilker > > > > > > > > > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > _ > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/09 > > > > 01 > > > > 4E > > > > 06/91124912.jpg> > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > __________________________________________________________________ > > > > __ > > > > __ > > > > _ > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/06050304/01044D03/0D06 > > > 4E > > > 03/44221641.jpg> > > > ____________________________________________________________________ > > > __ > > > ____________________________________________________________________ > > > __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > ____________________________________________________________________ > > > __ > > > ____________________________________________________________________ > > > __ > > > _ > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0605030D/06094A05/0D044E > > 0A/24228196.jpg> > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ______________________________________________________________________ > > ______________________________________________________________________ > > _ > > > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > _____________________________________________________________________________________________________________________________________________ > > > <http://271570.sigclick.mailinfo.com/sigclick/03060204/0302480A/01004F03/211…> > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Ok, I installed the MySQL-python package. Then initdb script run fine. But this time I have the following error when starting ser: [root@asterisk1 sip_router]# /root/ser/sbin/ser -c 0(13176) set_mod_param_regex: parameter <handle_presence_subscriptions> not found in module <presence_b2b> 0(13176) parse error (127,19-20): Can't set module parameter 0(13176) parse error (203,34-35): unknown command, missing loadmodule? 0(13176) parse error (208,30-31): unknown command, missing loadmodule? 0(13176) parse error (213,25-26): unknown command, missing loadmodule? 0(13176) parse error (216,30-31): unknown command, missing loadmodule? ERROR: bad config file (5 errors) what's wrong with my presence_b2b module ? Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Thursday, March 16, 2006 10:26 AM To: Vaclav Kubart Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Problem starting SER with Presence support Hi, Thanks for the files. When I run the initdb script I have the following errors. I guess that I need python-mysqldb. Where can I find this ? (I never used python before) Is that package the required one : MySQL-python 0.9.1-6.i386 ? # ./initdb.sh ser_domain: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, March 16, 2006 9:45 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support There is my testing config file. It needs to have some users stored in database (I attach my script which adds initialization data using serctl). You can try to look on it and modify it according your needs (change paths to modules, ...) Vaclav On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > Is there any working configuration sample for Ser with presence ? > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > Thanks, > ilker > <http://271570.sigclick.mailinfo.com/sigclick/03020806/06064D01/01074501/915…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Hi, Thanks for the files. When I run the initdb script I have the following errors. I guess that I need python-mysqldb. Where can I find this ? (I never used python before) Is that package the required one : MySQL-python 0.9.1-6.i386 ? # ./initdb.sh ser_domain: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_user: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError ser_uri: No module named MySQLdb: ImportError Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Thursday, March 16, 2006 9:45 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support There is my testing config file. It needs to have some users stored in database (I attach my script which adds initialization data using serctl). You can try to look on it and modify it according your needs (change paths to modules, ...) Vaclav On Thu, Mar 16, 2006 at 09:30:23AM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > Is there any working configuration sample for Ser with presence ? > I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Wednesday, March 15, 2006 6:11 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > Hello, > mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). > > Presence handbook is a bit out of date, but in few days there will be new version - please be patient. > > Vaclav > > On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Thanks for the presence book. I am reading it now. But I think I > > also need scripts for creating needed tables in Mysql. I couldn't > > find anywhere scripts for mysql. There is a "make dbinstall" > > command in cvs release but that didn't produce the expected result. > > > > Btw, I just compiled cvs version again and tried the cfg file > > example in the presence book at > > ftp://ftp.iptel.org/pub/ser/presence/ This cfg example still has the > > fifo="/tmp/ser_fifo" in it and I still get the same parse error. > > > > Any help on this ? > > > > Thanks, > > ilker > > > > -----Original Message----- > > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > > Sent: Wednesday, March 15, 2006 8:37 AM > > To: ?lker Aktuna (Koç.net) > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] Problem starting SER with Presence support > > > > Hi, > > I am responsible for presence server in ser. > > > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. > > > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > > > Vaclav > > > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > > > On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > > > Hi again, > > > > > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > > > How can I contact the developers ? (serdev(a)lists.iptel.org does not > > > accept my emails) > > > > > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > > > > > I am desperately trying to build some presence server. Please help me... > > > > > > Thanks, > > > ilker > > > > > > > > > ________________________________ > > > > > > From: serusers-bounces(a)lists.iptel.org > > > [mailto:serusers-bounces@lists.iptel.org] > > > On Behalf Of ?lker Aktuna (Koç.net) > > > Sent: Tuesday, March 14, 2006 9:12 AM > > > To: serusers(a)lists.iptel.org > > > Subject: [Serusers] Problem starting SER with Presence support > > > > > > > > > Hi everyone, > > > > > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > > > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > > > sip_router > > > > > > I have libxml2 installed and the sources compile fine. > > > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > > > > > Unfortunately ser does not start with the following error: > > > > > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > > > /root/ser/etc/ser/ser.cfg > > > 0(28118) parse error (11,1-5): syntax error > > > 0(28118) parse error (11,1-5): > > > ERROR: bad config file (2 errors) > > > > > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > > > > > # ls -adl /tmp/ > > > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > > > > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > > > > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > > > fifo=/tmp/ser_fifo in your config > > > > > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > > > > > Thanks, > > > ilker > > > > > > > > > __________________________________________________________________ > > > __ > > > __ > > > __________________________________________________________________ > > > __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > __________________________________________________________________ > > > __ > > > __ > > > __________________________________________________________________ > > > __ > > > __ > > > _ > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/09 > > > 01 > > > 4E > > > 06/91124912.jpg> > > > __________________________________________________________________ > > > __ > > > __ > > > __________________________________________________________________ > > > __ __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler > > > iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla > > > ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > > __________________________________________________________________ > > > __ > > > __ > > > __________________________________________________________________ > > > __ > > > __ > > > _ > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/06050304/01044D03/0D06 > > 4E > > 03/44221641.jpg> > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ > > _ > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0605030D/06094A05/0D044E > 0A/24228196.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ <http://271570.sigclick.mailinfo.com/sigclick/05070306/05044D09/07004E01/170…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Hi, Is there any working configuration sample for Ser with presence ? I understand that handbook is out of date but if my problem is just the fifo line, may I see a working example ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Wednesday, March 15, 2006 6:11 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support Hello, mysql tables can be created using script scripts/mysql/ser_mysql.sh in source tree (CVS version). Presence handbook is a bit out of date, but in few days there will be new version - please be patient. Vaclav On Wed, Mar 15, 2006 at 05:57:07PM +0200, ?lker Aktuna (Koç.net) wrote: > Hi, > > Thanks for the presence book. I am reading it now. But I think I also > need scripts for creating needed tables in Mysql. I couldn't find > anywhere scripts for mysql. There is a "make dbinstall" command in > cvs release but that didn't produce the expected result. > > Btw, I just compiled cvs version again and tried the cfg file example > in the presence book at ftp://ftp.iptel.org/pub/ser/presence/ This cfg > example still has the fifo="/tmp/ser_fifo" in it and I still get the > same parse error. > > Any help on this ? > > Thanks, > ilker > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Wednesday, March 15, 2006 8:37 AM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] Problem starting SER with Presence support > > Hi, > I am responsible for presence server in ser. > > In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. > > Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. > > Vaclav > > P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). > > On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > > Hi again, > > > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > > How can I contact the developers ? (serdev(a)lists.iptel.org does not accept > > my emails) > > > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > > > I am desperately trying to build some presence server. Please help me... > > > > Thanks, > > ilker > > > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Tuesday, March 14, 2006 9:12 AM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] Problem starting SER with Presence support > > > > > > Hi everyone, > > > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > > sip_router > > > > I have libxml2 installed and the sources compile fine. > > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > > > Unfortunately ser does not start with the following error: > > > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > > /root/ser/etc/ser/ser.cfg > > 0(28118) parse error (11,1-5): syntax error > > 0(28118) parse error (11,1-5): > > ERROR: bad config file (2 errors) > > > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > > > # ls -adl /tmp/ > > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > > fifo=/tmp/ser_fifo in your config > > > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > > > Thanks, > > ilker > > > > > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ > > _ > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/0901 > > 4E > > 06/91124912.jpg> > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > > ____________________________________________________________________ > > __ > > ____________________________________________________________________ > > __ > > _ > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/06050304/01044D03/0D064E > 03/44221641.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ <http://271570.sigclick.mailinfo.com/sigclick/0605030D/06094A05/0D044E0A/242…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] RADIUS authentication based on client ip
by Gokhan Uslu 16 Mar '06

16 Mar '06

Hi, I am using SER and FREERADIUS. I want to authenticate clients with FREERADIUS based on client ip address. Can anyone give me sample configuration? Thanks for all your help. BR Gokhan

1 0

[Serusers] How 500 interal error eccored suddenly? and how to fix this problem.
by wu yaqian 16 Mar '06

16 Mar '06

Hello,every one I use ser-0.9.4.Sometimes i meet 500 interal error error. I want to know how to fix this problem? Thanks a lot mail-to:wflyfox2003@gmail.com

2 2

[Serusers] RE:RE: REMOTE UA's LOOSING CONNECTION (NEWBIE QUESTION)
by Iddrisu 16 Mar '06

16 Mar '06

Remote client unable to register with ser after enabling port forwarding from ext public ip to internal asterisk private address. Following is my setup: SER listens on port 5060 on public ip xx.xx.xx.xx (ext NIC eth0) Asterisk listens on 5060 on internal private ip 192.168.1.4 (int NIC eth1) Following port ranges are forwarded from xx.xx.xx.xx to 192.168.1.4: SIP 5004-5082, RTP 10001-20000. Once I stop port forwarding, there is no problem with remote client registration. I'm an absolute newbie. I've googled and searched through the ser users archives for prior similar issues without any luck. Help is highly appreciated. Iddris -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 14/03/2006

1 0

[Serusers] Hangup on ser with asterisk
by Bart J. Smit 16 Mar '06

16 Mar '06

Hi All, I'm still not getting anywhere with this. SER and Asterisk on the same box listening on 5060/5065 respectively. Invites for pbx.nexusmgmt.com go to the asterisk and call is connected. The ser registered phone can hang up but the asterisk registered phone can't. I have reduced my ser.cfg to the simplest form. Could somebody please tell me what I'm missing? Thanks, Bart... fork=yes log_stderror=no mhomed=1 listen=65.126.236.148 listen=192.168.163.120 listen=127.0.0.1 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) alias="65.126.236.148" alias="192.168.163.120" alias="nexphone" alias="nexphone.nexusmgmt.com" route { if (!mf_process_maxfwd_header("10")) {sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) {sl_send_reply("513", "Message Overflow"); break; }; if (method!="REGISTER") { record_route(); }; if (loose_route()) { route(1); break; }; if (method=="INVITE") { if (uri=~"^sip:*@pbx\.nexusmgmt\.com$") { forward(localhost,5065); break; }; }; if (uri!=myself) { route(1); break; }; if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; } route[2] { sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; if (!save("location")) { sl_reply_error(); }; }

2 1

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 16 Mar '06

16 Mar '06

Hi, Thanks for the presence book. I am reading it now. But I think I also need scripts for creating needed tables in Mysql. I couldn't find anywhere scripts for mysql. There is a "make dbinstall" command in cvs release but that didn't produce the expected result. Btw, I just compiled cvs version again and tried the cfg file example in the presence book at ftp://ftp.iptel.org/pub/ser/presence/ This cfg example still has the fifo="/tmp/ser_fifo" in it and I still get the same parse error. Any help on this ? Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Wednesday, March 15, 2006 8:37 AM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Problem starting SER with Presence support Hi, I am responsible for presence server in ser. In few days, there will be new version of presence snapshot with new version of "presence handbook" (actualized documentation and configuration samples). Last versions of them are available on ftp://ftp.iptel.org/pub/ser/presence. Try to read the "presence handbook", all things needed for presence setup should be written there. Let me know if you miss something in it. Vaclav P.S. Old configuration files will probably NOT work with new version of ser (like your fifo problems). On Tue, Mar 14, 2006 at 05:50:27PM +0200, ?lker Aktuna (Koç.net) wrote: > Hi again, > > isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? > How can I contact the developers ? (serdev(a)lists.iptel.org does not accept > my emails) > > Maybe someone could point me to another presence server. Is there any presence server available for trying ? > > I am desperately trying to build some presence server. Please help me... > > Thanks, > ilker > > > ________________________________ > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > On Behalf Of ?lker Aktuna (Koç.net) > Sent: Tuesday, March 14, 2006 9:12 AM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Problem starting SER with Presence support > > > Hi everyone, > > I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout > sip_router > > I have libxml2 installed and the sources compile fine. > After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. > > Unfortunately ser does not start with the following error: > > # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f > /root/ser/etc/ser/ser.cfg > 0(28118) parse error (11,1-5): syntax error > 0(28118) parse error (11,1-5): > ERROR: bad config file (2 errors) > > Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : > > # ls -adl /tmp/ > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: > > Error opening ser's FIFO /tmp/ser_fifo Make sure you have line > fifo=/tmp/ser_fifo in your config > > By any chance, is there any user/developer who may have dealt with thşs problem before ? > > Thanks, > ilker > > > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > > > > <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/09014E > 06/91124912.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers <http://271570.sigclick.mailinfo.com/sigclick/06050304/01044D03/0D064E03/442…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

4 3

[Users] LCR and t_relay
by Rick Richardson 16 Mar '06

16 Mar '06

I think my previous issues boil down to my lack of understanding as to how the tm module knows where to forward requests in a new transaction. In the initial invite, the LCR sets the uri:host,port and t_relay obviously sends the item to the proper destination. However.. after the 180 and 200. The resulting ACK is a new transaction, as well as the messages that follow. What I don't understand is t_relay knows to forward to the destination selected by the lcr module in these new transactions?. Currently its behavior is to forward to the host part of the TO URI. This does not do me any good. How can I ensure that the dialog continues to go through the proper gateway? Thanks, Rick

2 2

RE: [Users] Register Replication Example
by Lenir 15 Mar '06

15 Mar '06

Does anybody have any working configs/examples that they can share to get registration replication working? -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Lenir Sent: Tuesday, March 14, 2006 11:44 AM To: users(a)openser.org Subject: RE: [Users] Register Replication Example No, all my boxes serve the same domain. Its just for redundancy. -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Arek Bekiersz Sent: Tuesday, March 14, 2006 10:32 AM To: users(a)openser.org Subject: Re: [Users] Register Replication Example Hello, It depends what domains the boxes run. IMHO if every box runs separate domain(s), you don't need to replicate registration information (at least for basic service). Every box should keep 'HLR' register for his own domain(s) only. Then every box handles requests for its own domain(s) correctly. If there is need to communicate between proxies, it's done on SIP level, not on underlaying 'location' dbase. Or someone please correct me :-))) -- Regards, Arek Bekiersz Lenir wrote: > Hello guys, > I was wondering if anybody could share an example config using > Registration Replication. I have two OpenSER boxes right now. In the > near future I will be adding a third one. > Question, If I recall correctly, I think I saw a post saying that > registration replication only works on a 1-to-1 basis? Is this correct? > What would be done for someone who has 3+ openser boxes, what can be > done so that they all know about each other and who's registered where? _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

[Serusers] SER wiht presence
by Gustavo Moreira 15 Mar '06

15 Mar '06

I downloaded the <http://ftp.iptel.org/pub/ser/presence/current_version.tar.gz> current_version.tar.gz from http://ftp.iptel.org/pub/ser/presence/ I followed the instructions tar -xvzf <http://ftp.iptel.org/pub/ser/presence/current_version.tar.gz> current_version.tar.gz cd ser-0.10.99-dev30-tm-timers-pa-3 make install prefix=/usr/local/ser and I get the following errors: ERROR: module modules/acc/acc.so not compiled ERROR: module modules/mysql/mysql.so not compiled ERROR: module modules/pa/pa.so not compiled ERROR: module modules/rls/rls.so not compiled ERROR: module modules/xmlrpc/xmlrpc.so not compiled Is anything missing?

1 0

[Serusers] lcr and mysql db
by roger leszczynski 15 Mar '06

15 Mar '06

THis is from an irc convo with brettnem, much thanks for his help..... the lcr mod will lookup the ruri in the lcr table.. matching prefix and from_ruri which gives a grp_id.. this grp_id is matched up to a grp_id in gw_grp (I think, I munged the functions) the grp_id correlates to multiple possible gateways for that call one table resolves prefixes (numbers) to route groups.. the other resolves route groups to a list of gateways (or a feature server) lcr will route based on NPANXX to certain provider, or route DIDs to feature servers out of the box with like 2 lines of code in ser.cfg.. that's right you really should have more than 2.. but you got the idea.. you need to check for load_gws failure (ie, no route 404) example for: sip:1234567890@test.com to sip:1234567890@test.org tamp4x mysql> describe lcr; tamp4x +----------+---------------------+------+-----+---------+-------+ tamp4x | Field | Type | Null | Key | Default | Extra | tamp4x +----------+---------------------+------+-----+---------+-------+ tamp4x | prefix | varchar(16) | | MUL | | | tamp4x | from_uri | varchar(128) | | MUL | % | | tamp4x | grp_id | int(10) unsigned | | MUL | 0 | | tamp4x | priority | tinyint(3) unsigned | | | 0 | | tamp4x +----------+---------------------+------+-----+---------+-------+ tamp4x 4 rows in set (0.00 sec) tamp4x mysql> describe gw; tamp4x +------------+----------------------+------+-----+---------+-------+ tamp4x | Field | Type | Null | Key | Default | Extra | tamp4x +------------+----------------------+------+-----+---------+-------+ tamp4x | gw_name | varchar(128) | | PRI | | | tamp4x | ip_addr | int(10) unsigned | | | 0 | | tamp4x | port | smallint(5) unsigned | YES | | NULL | | tamp4x | uri_scheme | tinyint(3) unsigned | YES | | NULL | | tamp4x | transport | tinyint(3) unsigned | YES | | NULL | | tamp4x | grp_id | int(10) unsigned | | MUL | 0 | | tamp4x +------------+----------------------+------+-----+---------+-------+ tamp4x mysql> describe gw_grp; tamp4x +----------+------------------+------+-----+---------+----------------+ tamp4x | Field | Type | Null | Key | Default | Extra | tamp4x +----------+------------------+------+-----+---------+----------------+ tamp4x | grp_id | int(10) unsigned | | PRI | NULL | auto_increment | tamp4x | grp_name | varchar(64) | | | | | tamp4x +----------+------------------+------+-----+---------+----------------+ tamp4x 2 rows in set (0.02 sec) tamp4x mysql> describe grp; tamp4x +---------------+--------------+------+-----+---------------------+-------+ tamp4x | Field | Type | Null | Key | Default | Extra | tamp4x +---------------+--------------+------+-----+---------------------+-------+ tamp4x | username | varchar(64) | | PRI | | | tamp4x | domain | varchar(128) | | PRI | | | tamp4x | grp | varchar(50) | | PRI | | | tamp4x | last_modified | datetime | | | 0000-00-00 00:00:00 | | tamp4x +---------------+--------------+------+-----+---------------------+-------+ that is the table structures make sure your version table looks like this: +-----------------------+---------------+ | table_name | table_version | +-----------------------+---------------+ | subscriber | 5 | | reserved | 1 | | phonebook | 1 | | pending | 4 | | missed_calls | 2 | | location | 1001 | | aliases | 1001 | | grp | 2 | | event | 1 | | active_sessions | 1 | | acc | 2 | | config | 1 | | silo | 3 | | realm | 1 | | domain | 1 | | uri | 1 | | server_monitoring | 1 | | server_monitoring_agg | 1 | | trusted | 1 | | usr_preferences | 2 | | usr_preferences_types | 1 | | admin_privileges | 1 | | calls_forwarding | 1 | | speed_dial | 2 | | dbaliases | 1 | | gw | 3 | | gw_grp | 1 | | lcr | 1 | +-----------------------+---------------+ insert into lcr values(1234567890,'%',100,50); insert into gw values('my-nifty-gateway',122432324,5060,'','',100); the ip address you have to reverse the octets and THEN convert to long giving 122432324 (test.org) here is the script for IP conversion: (make sure you have Net::IP module installed) 1. #!/usr/bin/perl 2. use Net::IP; 3. my $ip = new Net::IP ($ARGV[0]) or die (Net::IP::Error()); 4. print "In Binary: " . $ip->binip . "\n"; 5. $decip= bin2dec($ip->binip); 6. print "DecIP:$decip\n"; 7. sub bin2dec { 8. return unpack("N", pack("B32", substr("0" x 32 . shift, -32))); 9. } the 100 is the important data. it's the key that binds the first record in the lcr table to the ip record in the gw table that way, anything that routes to your nifty gateway, you just put it into gw_grp 100 and it works.. just one entry in the gw table. the ipaddr is what you want the destination host to be. now here is my ser.cfg # ----------- global configuration parameters ------------------------ # debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes# (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=64.201.13.52 port=5060 children=4 # fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/sip_router/modules/mysql/mysql.so" loadmodule "/usr/local/sip_router/modules/nathelper/nathelper.so" loadmodule "/usr/local/sip_router/modules/sl/sl.so" loadmodule "/usr/local/sip_router/modules/tm/tm.so" loadmodule "/usr/local/sip_router/modules/rr/rr.so" loadmodule "/usr/local/sip_router/modules/maxfwd/maxfwd.so" loadmodule "/usr/local/sip_router/modules/usrloc/usrloc.so" loadmodule "/usr/local/sip_router/modules/registrar/registrar.so" loadmodule "/usr/local/sip_router/modules/lcr/lcr.so" #!!!!!!!!!!you may need to use openser's table formatting!!!!!!!# #modparam("lcr","db_url", "mysql://root:password@localhost/openser") modparam("lcr","db_url", "mysql://root:password@localhost/ser") # main routing logic route{ if (method=="REGISTER"){ #record_route(); forward(mysip.server.com,5060); }; #loose_route(); if (method=="INVITE") { #record_route(); force_rtp_proxy(); if (!load_gws()) { sl_send_reply("500", "Server Internal Error - Cannot load gateways"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (status=~"[12][0-9][0-9]") force_rtp_proxy(); } Ok hopefully this will work for someone out there , let me know because its not working perfectly for me... when i attempt to make a call i get memory errors... 1(2850) ERROR: sip_msg_cloner: cannot allocate memory 1(2850) ERROR: new_t: out of mem: 1(2850) ERROR: t_newtran: new_t failed 1(2850) ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) 2(2852) ERROR: build_req_buf_from_sip_req: out of memory 2(2852) ERROR: forward_request: building failed 2(2852) Warning: sl_send_reply: I won't send a reply for ACK!! 2(2852) ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (2/SL)

1 0

[Serusers] SERWeb
by Tyler Farmer 15 Mar '06

15 Mar '06

I am trying to setup the SERWeb interface. I started with PHP 5 and installed the classkit extension. When I tried to access SERWeb through IE I got the error: Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit. I followed the instructions there, verified the extension=classkit.so in the php.ini file, etc. and continued to get the error. Then I downgraded to PHP 4.4.2, and I am still getting that same error. Apache logs the following when I first start the Apache service: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 Has anybody seen this before? Tyler

1 0

Re: R: R: R: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

you mean missing libraries? that's normal... just download missing library RPM's.. might take long though :(... Last time I tried installing some small program on Fedora, i has to search up 20 or so libraries before I could actually finish installation. On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > I have a red hat ES. > > Get Mysql.4.1 from web site, try to install and he gives a lot of library... > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 16.01 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: R: R: [Serusers] Re: > > i have no idea how to do that.. sorry... just try installing into the > same directory as before... what OS are you using btw? better install > from packages... > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > How can I remove a tar.gz installation? > > > > -----Messaggio originale----- > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > Inviato: mercoledì 15 marzo 2006 15.36 > > A: serusers(a)lists.iptel.org > > Oggetto: Re: R: R: [Serusers] Re: > > > > I guess, MySQL server has to be installed, because SER will use a > > default MySQL database to store accound info... anyway, your error > > clearly shows, that SER needs MySQL server running... I suggest > > installing 4.1... > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > i can use ser only if mysql is installed? > > > > > > Have you senn my ser.cfg file? What do you think? > > > > > > Thanks for help me > > > > > > -----Messaggio originale----- > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > Inviato: mercoledì 15 marzo 2006 15.26 > > > A: serusers(a)lists.iptel.org > > > Oggetto: Re: R: [Serusers] Re: > > > > > > is you MySQL server running... seems that it's not... > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > I've tried to add a new user with the command <serctl add> and, after > > > > password (standard shoul be heslo) receive this error: > > > > > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > > > /mysql/mysql.sock' (111) > > > > Error: 400; check if you use aliases in SER > > > > > > > > Please help me > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: R: R: R: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

you mean missing libraries? that's normal... just download missing library RPM's.. might take long though :(... Last time I tried installing some small program on Fedora, i has to search up 20 or so libraries before I could actually finish installation. On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > I have a red hat ES. > > Get Mysql.4.1 from web site, try to install and he gives a lot of library... > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 16.01 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: R: R: [Serusers] Re: > > i have no idea how to do that.. sorry... just try installing into the > same directory as before... what OS are you using btw? better install > from packages... > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > How can I remove a tar.gz installation? > > > > -----Messaggio originale----- > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > Inviato: mercoledì 15 marzo 2006 15.36 > > A: serusers(a)lists.iptel.org > > Oggetto: Re: R: R: [Serusers] Re: > > > > I guess, MySQL server has to be installed, because SER will use a > > default MySQL database to store accound info... anyway, your error > > clearly shows, that SER needs MySQL server running... I suggest > > installing 4.1... > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > i can use ser only if mysql is installed? > > > > > > Have you senn my ser.cfg file? What do you think? > > > > > > Thanks for help me > > > > > > -----Messaggio originale----- > > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > > Inviato: mercoledì 15 marzo 2006 15.26 > > > A: serusers(a)lists.iptel.org > > > Oggetto: Re: R: [Serusers] Re: > > > > > > is you MySQL server running... seems that it's not... > > > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > I've tried to add a new user with the command <serctl add> and, after > > > > password (standard shoul be heslo) receive this error: > > > > > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > > > /mysql/mysql.sock' (111) > > > > Error: 400; check if you use aliases in SER > > > > > > > > Please help me > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] Mr. zmli
by Andrey Kouprianov 15 Mar '06

15 Mar '06

Guys... Can we finally update zmli's email or just block him... I receive more daily mail from him, than from the whole list itself.

1 0

Re: R: R: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

i have no idea how to do that.. sorry... just try installing into the same directory as before... what OS are you using btw? better install from packages... On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > How can I remove a tar.gz installation? > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 15.36 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: R: [Serusers] Re: > > I guess, MySQL server has to be installed, because SER will use a > default MySQL database to store accound info... anyway, your error > clearly shows, that SER needs MySQL server running... I suggest > installing 4.1... > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > i can use ser only if mysql is installed? > > > > Have you senn my ser.cfg file? What do you think? > > > > Thanks for help me > > > > -----Messaggio originale----- > > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > > Inviato: mercoledì 15 marzo 2006 15.26 > > A: serusers(a)lists.iptel.org > > Oggetto: Re: R: [Serusers] Re: > > > > is you MySQL server running... seems that it's not... > > > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > I've tried to add a new user with the command <serctl add> and, after > > > password (standard shoul be heslo) receive this error: > > > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > > /mysql/mysql.sock' (111) > > > Error: 400; check if you use aliases in SER > > > > > > Please help me > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: R: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

I guess, MySQL server has to be installed, because SER will use a default MySQL database to store accound info... anyway, your error clearly shows, that SER needs MySQL server running... I suggest installing 4.1... On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > i can use ser only if mysql is installed? > > Have you senn my ser.cfg file? What do you think? > > Thanks for help me > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 15.26 > A: serusers(a)lists.iptel.org > Oggetto: Re: R: [Serusers] Re: > > is you MySQL server running... seems that it's not... > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > I've tried to add a new user with the command <serctl add> and, after > > password (standard shoul be heslo) receive this error: > > > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > > /mysql/mysql.sock' (111) > > Error: 400; check if you use aliases in SER > > > > Please help me > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

is you MySQL server running... seems that it's not... On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > I've tried to add a new user with the command <serctl add> and, after > password (standard shoul be heslo) receive this error: > > ERROR 2002 (HY000): Can't connect to local MySQL server through socket > /mysql/mysql.sock' (111) > Error: 400; check if you use aliases in SER > > Please help me >

1 1

[Users] Path and replication...
by Helge Waastad 15 Mar '06

15 Mar '06

Hi, I'm trying out the new path module, and I've got a couple of questions.. In my current configuration I'm replicating the register between two OpenSER. (To have each registrar have all contacts for all users + redundancy) However, now I get ERROR: t_newtran: EoH not parsed when I replicate the REGISTER... br hw -- Helge Waastad Senior Konsulent Systemavdelingen Smartnet

3 9

[Users] Cacheless usrloc
by Teemu Harju 15 Mar '06

15 Mar '06

Hi, I've been tryin to test the cacheless usrloc (db_mode = 3), but it doesn't seem to work for me. Contacts don't go into the location table in mysql and naturally they don't survive the restart. Basically it works the same way as the db_mode = 0 which is the default I guess. I'm using Openser 1.0.1. Is the cacheless mode included in that or is it only in CVS? If so, is it enough for me to download the module from CVS and use that, or do I need to compile the whole thing? Best Regards, Teemu -- Teemu Harju http://www.teemuharju.net

2 1

Re: R: [Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

Did you set this==> listen=127.0.0.1 If yes, then it will not work... I dont remember why, but this topic was already discussed in the list (try searching Google, if you are interested). If that's the case, then use private IPs to test your SER (192.168.x.x) If that's not the case, please, send your ser.cfg attached to the next email. Let's see what could be the problem. On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > I'm trying and trying but still have not success... > > I'm working also over cfg file but nothing, he always said me that ser.pid does not exist...what I can do? > > Help is needed > Davide > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: mercoledì 15 marzo 2006 10.46 > A: serusers(a)lists.iptel.org > Oggetto: [Serusers] Re: > > did you say "you can understand"? or still cannot? anyway, it's good, > if you did find the problem :) > > On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > > > > this is what i have: > > > > [root@serverlinux ser-0.9.4]# tail -n20 /var/log/messages > > Mar 15 10:12:18 serverlinux ser: Avvio ser succeeded > > Mar 15 10:12:19 serverlinux crond: Avvio crond succeeded > > Mar 15 10:12:20 serverlinux xfs: Avvio xfs succeeded > > Mar 15 10:12:20 serverlinux atd: Avvio atd succeeded > > Mar 15 10:12:21 serverlinux mdmonitor: mdadm succeeded > > Mar 15 10:12:21 serverlinux mdmpd: mdmpd succeeded > > Mar 15 10:12:24 serverlinux kernel: mtrr: your processor doesn't support > > write-combining > > Mar 15 10:13:01 serverlinux gdm(pam_unix)[1160]: session opened for user > > root by (uid=0) > > Mar 15 10:13:16 serverlinux modprobe: modprobe: Can't locate module > > sound-slot-0 > > Mar 15 10:13:16 serverlinux modprobe: modprobe: Can't locate module > > sound-service-0-3 > > Mar 15 10:13:24 serverlinux gconfd (root-1330): Inizializzazione (versione > > 2.2.1), pid 1330, utente 'root' > > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > > "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato > > risolta ad una fonte di configurazione in sola lettura in posizione 0 > > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > > "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di configurazione > > scrivibile in posizione 1 > > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > > "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato > > risolta ad una fonte di configurazione in sola lettura in posizione 2 > > Mar 15 10:16:52 serverlinux modprobe: modprobe: Can't locate module > > sound-slot-0 > > Mar 15 10:16:52 serverlinux modprobe: modprobe: Can't locate module > > sound-service-0-3 > > Mar 15 10:19:08 serverlinux ser: WARNING: fix_socket_list: could not rev. > > resolve 138.132.167.226 > > Mar 15 10:19:08 serverlinux ser: WARNING: fix_socket_list: could not rev. > > resolve 138.132.167.226 > > Mar 15 10:19:08 serverlinux /usr/local/sbin/ser[1433]: Maxfwd module- > > initializing > > Mar 15 10:19:08 serverlinux /usr/local/sbin/ser[1433]: ERROR: tcp_init: > > bind(7, 0x80fa6bc, 16) on 127.0.0.1: Address already in use > > > > i really can understand where is the problem! > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: [Users] openser and authentication
by buxalex＠libero.it 15 Mar '06

15 Mar '06

Hello Bogdan, I made some more tests, and I realized that: After registering my softphone (Express Talk) with user and password correct, if I change the password with a wrong one, the softphone registers anyway to openser. But if I shutdown the softphone and I restart it with a wrong password, the registration is refused (error 401). So I am wandering whether it is a softphone problem or a bug into openser. I have this doubt, because changing the user with a non existent into db, softphone doesn't register to openser even avoiding to shutdown the softphone. What do you think? Thanks for your support... Alessandro ---------- Initial Header ----------- >From : "Bogdan-Andrei Iancu" bogdan(a)voice-system.ro To : "buxalex(a)libero.it" buxalex(a)libero.it Cc : "users" users(a)openser.org Date : Wed, 15 Mar 2006 11:22:39 +0200 Subject : Re: [Users] openser and authentication > Hi Alessandro, > > do you see any challenge from openser as a response to the REGISTER > requests? have you try the debug mode to get more info about what is > going one? > > regards, > bogdan > > buxalex(a)libero.it wrote: > > >Hello, > >I am new with openser, and I am trying to figure out how to setup the openser.cfg. > >I've installed openser 1.1.0 with the db support. It works fine, infact I can register softphones and have calls. The softphones are correctly registered checking the username into Mysql db. I would like to check also the password, and maybe the phone number, so I tried to enter the following parameter: > > > >modparam("auth_db", "calculate_ha1", yes) > >modparam("auth_db", "password_column", "password") > > > >but it doesn't work, infact the softphones are anyway registered (it checks only the username). Did I missed something in my configuration? > > > >Thnaks a lot > >Alessandro > > > >PS. This is my openser.config (sorry for the long mail...): > > > ># ----------- global configuration parameters -- > >debug=3 # debug level (cmd line: -dddddddddd) > >fork=yes > >log_stderror=no # (cmd line: -E) > >check_via=no # (cmd. line: -v) > >dns=no # (cmd. line: -r) > >rev_dns=no # (cmd. line: -R) > >port=5060 > >children=4 > >fifo="/tmp/openser_fifo" > > > ># ------------------ module loading > >loadmodule "/usr/local/lib/openser/modules/mysql.so" > >loadmodule "/usr/local/lib/openser/modules/sl.so" > >loadmodule "/usr/local/lib/openser/modules/tm.so" > >loadmodule "/usr/local/lib/openser/modules/rr.so" > >loadmodule "/usr/local/lib/openser/modules/maxfwd.so" > >loadmodule "/usr/local/lib/openser/modules/usrloc.so" > >loadmodule "/usr/local/lib/openser/modules/registrar.so" > >loadmodule "/usr/local/lib/openser/modules/textops.so" > >loadmodule "/usr/local/lib/openser/modules/alias_db.so" > > > >loadmodule "/usr/local/lib/openser/modules/auth.so" > >loadmodule "/usr/local/lib/openser/modules/auth_db.so" > > > ># ----------------- setting module-specific parameters - > >modparam("usrloc", "db_url", "mysql://openser:openser@localhost/openser") > >modparam("usrloc", "db_mode", 2) > >modparam("auth_db", "calculate_ha1", yes) > >modparam("auth_db", "password_column", "password") > >modparam("rr", "enable_full_lr", 1) > >...... > >if (method=="REGISTER") { > >if (!www_authorize("161.27.53.93", "subscriber")) { > >www_challenge("161.27.53.93", "0"); > >exit; > >}; > >save("location"); > >exit; > >}; > >lookup("aliases"); > >if (!uri==myself) { > >append_hf("P-hint: outbound alias\r\n"); > >route(1); > >}; > >...... > > > > > >_______________________________________________ > >Users mailing list > >Users(a)openser.org > >http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > >

2 1

[Users] Hanging process when using children
by Martin Kjeldsen 15 Mar '06

15 Mar '06

Hi Has anyone experienced zombie processes, when running OpenSER 1.0.0 with children enabled? I'm unable to restart OpenSER, because of processes hanging (openser.pid), and they unvilling to accept a kill command! Can anybody advice me on what to do to get rid of these zombie processes? I have tried to pkill the processes in the group and also tried to kill a simgle process at the time but without any luck! All help is greatly appreciated. Kind regards Martin Kjeldsen

2 2

[Users] Problem in TM Module ?
by Stefan Prelle 15 Mar '06

15 Mar '06

Hi all, I'm using the OpenSER in a scenario in which I distribute incoming SIP calls among three gateways. Basically all I do is route[4] { if (uri=~"sip:.+[0-4]@") { t_on_failure("20"); route(20); } else if (uri=~"sip:.+[5-7]@") { t_on_failure("21"); route(21); } else { t_on_failure("22"); route(22); } } route[20] { #### route[21] and [22] similiar rewritehost("111.222.333.444"); if (!t_relay()) { sl_reply_error(); }; } failure_route[20] { if (t_check_status("503")) { log(1,"Overload detected on XXX - try YYY\n"); t_on_failure("3"); append_branch(); route(21); } } I see several error messages every second and they all look like this: BUG:tm:run_failure_handlers: stack level is 1!! Can anyone explain me what is causing this? Regards, Stefan

2 2

[Users] serweb error
by buxalex＠libero.it 15 Mar '06

15 Mar '06

Hello to everybody, I am using openser version 1.1.0 and I am trying to install serweb. I know it is developed for a previous version, but I guess it should work anyway, may be there will be some minor changes to do. :o) After the installation, when I run it I get the following error: Function aggregate_metod() doesn't exists. Try insyall classkit extension. :o(( Where I can find it? At the suggested URL: http://pecl.php.net/package/classkit it doesn't exist. I am using Linux FEDORA 4 with PHP v. 5.0.4 thanks in advance Alessandro

2 1

[Serusers] RE:RE: REMOTE UA's LOOSING CONNECTION (NEWBIE QUESTION)
by Iddrisu 15 Mar '06

15 Mar '06

Remote client unable to register with ser after enabling port forwarding from ext public ip to internal asterisk private address. Following is my setup: SER listens on port 5060 on public ip xx.xx.xx.xx (ext NIC eth0) Asterisk listens on 5060 on internal private ip 192.168.1.4 (int NIC eth1) Following port ranges are forwarded from xx.xx.xx.xx to 192.168.1.4: SIP 5004-5082, RTP 10001-20000. Once I stop port forwarding, there is no problem with remote client registration. I’m an absolute newbie. I’ve googled and searched through the ser users archives for prior similar issues without any luck. Help is highly appreciated. Iddris -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 14/03/2006

1 0

[Users] pa and path module
by Helge Waastad 15 Mar '06

15 Mar '06

2 3

[Users] is_method
by Helge Waastad 15 Mar '06

15 Mar '06

Hi, has anyone tried: is_method("SUBSCRIBE|PUBLISH")? It's not working. br hw -- Helge Waastad Senior Konsulent Smartnet

2 3

[Serusers] Re:
by Andrey Kouprianov 15 Mar '06

15 Mar '06

did you say "you can understand"? or still cannot? anyway, it's good, if you did find the problem :) On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > > > this is what i have: > > [root@serverlinux ser-0.9.4]# tail -n20 /var/log/messages > Mar 15 10:12:18 serverlinux ser: Avvio ser succeeded > Mar 15 10:12:19 serverlinux crond: Avvio crond succeeded > Mar 15 10:12:20 serverlinux xfs: Avvio xfs succeeded > Mar 15 10:12:20 serverlinux atd: Avvio atd succeeded > Mar 15 10:12:21 serverlinux mdmonitor: mdadm succeeded > Mar 15 10:12:21 serverlinux mdmpd: mdmpd succeeded > Mar 15 10:12:24 serverlinux kernel: mtrr: your processor doesn't support > write-combining > Mar 15 10:13:01 serverlinux gdm(pam_unix)[1160]: session opened for user > root by (uid=0) > Mar 15 10:13:16 serverlinux modprobe: modprobe: Can't locate module > sound-slot-0 > Mar 15 10:13:16 serverlinux modprobe: modprobe: Can't locate module > sound-service-0-3 > Mar 15 10:13:24 serverlinux gconfd (root-1330): Inizializzazione (versione > 2.2.1), pid 1330, utente 'root' > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato > risolta ad una fonte di configurazione in sola lettura in posizione 0 > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di configurazione > scrivibile in posizione 1 > Mar 15 10:13:25 serverlinux gconfd (root-1330): L'indirizzo > "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato > risolta ad una fonte di configurazione in sola lettura in posizione 2 > Mar 15 10:16:52 serverlinux modprobe: modprobe: Can't locate module > sound-slot-0 > Mar 15 10:16:52 serverlinux modprobe: modprobe: Can't locate module > sound-service-0-3 > Mar 15 10:19:08 serverlinux ser: WARNING: fix_socket_list: could not rev. > resolve 138.132.167.226 > Mar 15 10:19:08 serverlinux ser: WARNING: fix_socket_list: could not rev. > resolve 138.132.167.226 > Mar 15 10:19:08 serverlinux /usr/local/sbin/ser[1433]: Maxfwd module- > initializing > Mar 15 10:19:08 serverlinux /usr/local/sbin/ser[1433]: ERROR: tcp_init: > bind(7, 0x80fa6bc, 16) on 127.0.0.1: Address already in use > > i really can understand where is the problem!

1 0

Re: R: [Serusers] Re: starting ser
by Andrey Kouprianov 15 Mar '06

15 Mar '06

log file is /var/log/messages. you can see with command "tail -n 20 /var/log/messages" in the terminal. On 3/15/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel.it> wrote: > Thanks for reply, I'm desperate... > > Which particular file log I have to show? Please...help me...!!! > > -----Messaggio originale----- > Da: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Per conto di Andrey Kouprianov > Inviato: martedì 14 marzo 2006 13.08 > A: serusers(a)lists.iptel.org > Oggetto: [Serusers] Re: starting ser > > what does the log show? > > On 3/14/06, D'Addelfio Davide <Davide.D'Addelfio(a)italtel-consultant.com> wrote: > > > > > > > > Hi, I've tried to start ser using command <serctl start> but receive this > > error: > > > > > > > > PID file /var/run/ser.pid does not exist - SER start failed > > > > > > > > Could anyone help me in some way? > > > > Thanks > > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Users] openser and authentication
by buxalex＠libero.it 15 Mar '06

15 Mar '06

Hello, I am new with openser, and I am trying to figure out how to setup the openser.cfg. I've installed openser 1.1.0 with the db support. It works fine, infact I can register softphones and have calls. The softphones are correctly registered checking the username into Mysql db. I would like to check also the password, and maybe the phone number, so I tried to enter the following parameter: modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") but it doesn't work, infact the softphones are anyway registered (it checks only the username). Did I missed something in my configuration? Thnaks a lot Alessandro PS. This is my openser.config (sorry for the long mail...): # ----------- global configuration parameters -- debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/alias_db.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters - modparam("usrloc", "db_url", "mysql://openser:openser@localhost/openser") modparam("usrloc", "db_mode", 2) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("rr", "enable_full_lr", 1) ...... if (method=="REGISTER") { if (!www_authorize("161.27.53.93", "subscriber")) { www_challenge("161.27.53.93", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; ......

2 1

[Users] How to get list of gw?
by Marcello Lupo 15 Mar '06

15 Mar '06

Hi, I'm using exec_dset to get my list of gateways. For me is not possible to use the LCR module due to the complexity and preferences on which the gateways are chosen (particular algorithm based on caller and called and some other preferences in the DB). Most of the times i have a multiple gateways returned as lines (as requested from exec_dset module) ordered from the best to the worst: sip:123456@12.12.12.12 sip:123456@31.31.31.31 sip:123456@51.51.51.51 Now if i launch this dset in t_relay the openser use parallel forking to all of them and this not what i need (i need serial forking on failure). I read some documentation about doing the serial forking using avpops and there is no problem about it but i cannot use avp_db_load due to the same problem of LCR module. My problem is that I'm missing the way to move this list from dset to the avp list, or have the way to get the list of gateways directly from my script in the AVP. I'm not a C coder, may be some one can give me only an example of a simple module that take the same environment variable of exec_dset and let it execute my shell script that give back on standard output the list above in an avp? Do you have some ideas on how to do it? Thanks, Bye, Marcello

2 1

[Users] voice in one way
by unplug 15 Mar '06

15 Mar '06

Hi, Recently, some of our users experienced that there is only one way communication after the call is made. That's you can hear my words but I can't hear yours. Does it related to NAT? I want to ask what will cause such situation. Any clue for solving/debuging this situation? below is my configuration openser1.0.0 NAT using mediaproxy unplug

2 1

[Users] OpenSER, Heartbeat and LVS
by Helge Waastad 15 Mar '06

15 Mar '06

Hi, just a question for U all. I'm now trying to add both DNS SRV AND virtual IP address redundancy using both heartbeat (Linux-HA) and LVS (ldirector) The ldirector sends OPTION packets to see if the different servers in the cluster are alive. Each server has a /32 tun interface so OpenSER does not need to be restarted to use the virtual address. Everything works fine.....in TCP scenario..UDP is of course another story. I just wonder if someone has been able to make this work with UDP? If so, I just have to sharpen my pencils yet again :-) br hw -- Helge Waastad Senior Konsulent Smartnet

1 0

[Users] what difference between route and failure_route when using rewriteuri
by jimmy way 15 Mar '06

15 Mar '06

Hi all, I wanna to use rewriteuri to forward calls to next gw when call to last gw fail. My testing's script like this: route[1] { if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { if(t_check_status("(408)|(404)|(403)")) { revert_uri(); rewriteuri("sip:10001802@172.25.16.121:5060"); route(1); return(0); }; return(0); } But it worked like this(when timeout): 22.960402 172.25.16.250 -> 10.0.0.2 SIP Status: 500 I'm terribly sorry, server error occurred (1/SL) 22.960462 172.25.16.250 -> 10.0.0.2 SIP Status: 408 Request Timeout That is first it send an 500 error, then send an 408 timeout errro I try it in route like this route { ... if(method=="INVITE") { rewriteuri("sip:10001802@172.25.16.121:5060"); route(1); return(0); }; ... } It work fine. What's wrong with my scripts? Thanks Br, Jimway __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Users] circular replication and openser
by Mike Williams 15 Mar '06

15 Mar '06

Is anyone succesfully using circular database replication in MySQL and openser with DB access for everything? Any concerns I should be aware of? ---Mike

2 1

[Users] openser monitoring
by unplug 15 Mar '06

15 Mar '06

Hi, I found that there is a page teaching how to use monit to monitor openser within the same machine. I wonder how can I monitor the openser which is installed in another machine. http://www.openser.org/dokuwiki/doku.php?id=make_openser.init_script_work unplug

2 1

[Serusers] Ekiga.net, service down, impossible to restart SER
by Damien Sandras 15 Mar '06

15 Mar '06

Hello, As you probably know, the Ekiga SIP softphone was released yesterday. We are using SER as SIP Registrar/Proxy. Tonight, it suddenly stopped working, and when restarting it, I get: 0(0) convert_row(): No memory left 0(0) convert_rows(): Error while converting row #5679 0(0) convert_result(): Error while converting rows 0(0) store_result(): Error while converting result 0(0) preload_udomain(): Error while doing db_query 0(0) register_udomain(): Error while preloading domain 'aliases' 0(0) release_connection(): Removing connection from the pool There are no memory problems, but the number of users has dramtically increased lately. Is that a limitation of SER? I'm asking for help because we are short in time, the service is currently down and users started complaining... Thanks, -- _ Damien Sandras (o- //\ Ekiga Softphone: http://www.ekiga.org/ v_/_ FOSDEM 2006 : http://www.fosdem.org/ SIP Phone : sip:dsandras@ekiga.net sip:600000@ekiga.net

3 6

Re: [Users] 302 Moved Temporarily
by Bogdan-Andrei Iancu 15 Mar '06

15 Mar '06

ok - great. bogdan Diego Valencia wrote: > Thanks Bogdan!, this works fine to me :o) > > BR > > Diego > ----- Original Message ----- From: "Bogdan-Andrei Iancu" > <bogdan(a)voice-system.ro> > To: "Diego Valencia" <dvalencia(a)ip-tel.com.ar> > Cc: <Users(a)openser.org> > Sent: Tuesday, March 14, 2006 4:24 PM > Subject: Re: [Users] 302 Moved Temporarily > > >> Hi Diego, >> >> yes, it's possible. For INVITEs tou want to block the 302, install a >> failure route to catch the 302 reply : >> >> failure_route[x] { >> if (t_check_status(302)) { >> t_reply("403","denied"); >> exit; >> } >> } >> >> regards, >> bogdan >> >> Diego Valencia wrote: >> >>> Hi guys, I want to do that SER does not accept "302 Moved >>> Temporarily" messages from UA. I don't want to permit to do >>> forwarding from UAs. >>> Is it posible? >>> >>> thanks! >>> >>> Diego >>> >>> ____________________ >>> Diego Valencia >>> Network Support >>> IP-Tel SA >>> Tel: 0351-5890002 >>> Movil: 0351-155194286 >>> >>> >>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)openser.org >>> http://openser.org/cgi-bin/mailman/listinfo/users >>> >>>

1 0

[Serusers] ser+rtpproxy no audio
by Bart J. Smit 15 Mar '06

15 Mar '06

Our setup is: - CentOS 4.2 - ser 0.9.6 - rtpproxy latest CVS - mysql support The ser proxy is dual homed with one interface on the LAN and one on the public Internet. I can register phones on the public and LAN interface and two phones on the LAN can call and talk (since this doesn't require the rtpproxy). However, when I call between a LAN and a NAT-ed phone on the Internet, the call is made, both phones show the same codec but no sound is carried either way. The log shows that ser is putting the wrong source IP in, at least for the LAN side; it puts the source address as the public IP. This shows in the debug output (attached). The ser.cfg file is lightly modified from the onsip getting started document number five. I have experimented with simpler ser.cfg files that just do a force_rtp_proxy on all non-register routes but I never get any sound either way. I really wouldn't mind if the proxy was engaged on all calls, as most (if not all) of them will be made inbound to phones on the LAN. I have ran ethereal on the public phone and on ser itself, but I can't see any RTP packets flowing anywhere. Can anybody tell me what I'm missing in the config? Does anybody have a working conf file for a ser with rtpproxy with a LAN and public IP? Surely this is not an esoteric setup? Any help is *much* appreciated. Thank you, Bart...

2 1

[Serusers] Nat Helper + Media Proxy
by Darren Sessions 15 Mar '06

15 Mar '06

I've been reading the docs on nathelper and mediaproxy and am curious about the possibility of implementing both modules/functionalities on the same proxy (with the dispatcher and media proxy scripts running on separate boxes). The scenario would be to use either nathelper functionality or mediaproxy functionality based on results from something like client_nat_test, nat_uac_test, or another function like these. This would prevent unnecessary local bandwidth consumption by providing the correct nat transversal mechanism. After extensive googling, I still haven't been able to find a working/ semi-working example on this type of combination. Does anyone have any good pointers, example configs / basic configs, or ideas? Thanks in advance, - Darren CALL | |-> Analysis | |-> NATHELPER or |-> MEDIAPROXY

3 3

[Serusers] LCR module
by Ryan Pagquil 15 Mar '06

15 Mar '06

Hi, I want to use the LCR module of SER, but it is not included on the latest release of SER (0.9.6). Also is it possible to use this module to route especial calls to a certain gateway based on the country code of the destination? For example all calls to the Philippines are bound to a specific gateway and the decision will be based on the destination: destination is: 00632xxxxxxx ; i strip the leading 00 and to determine that it is a PSTN call then i want this call to be forwarded to a specific gateway. Can I do this with LCR module? How? Sample please... Thanks in advance, Ryan

3 4

[Serusers] ser-0.9.4 config with ser-0.9.6 question
by Ryan Pagquil 15 Mar '06

15 Mar '06

Hi, Is it ok to use a ser.cfg from ser-0.9.4 to ser-0.9.6 ? I'm currently planning to upgrade to the 0.9.6 version i'm using 0.9.4 right now. Thanks, Ryan

2 1

Re: [Users] LCR and BYE
by Rick Richardson 15 Mar '06

15 Mar '06

Thanks for the info. Unfortunately that is not the current behavior of the system. I removed the lcr routing on the BYE request so that it uses t_relay(). Now it sends the ACK (in response to the 200 OK) and the BYE to the to uri domain/ip-address rather than continuing the dialog. Yet the previous parts of the dialog are forwarded properly. What exactly does the tm module use to differentiate between transactions? Cause a problem could be that it is getting responses from the gateways at different ip addresses than it is sending. My "gateways" are simply a single machine with a bunch of aliased IPs running sipp. So a request comes in on .91 and goes out on .89 Would that cause this behavior? On Wed, 2006-03-15 at 01:50 +0200, Juha Heinanen wrote: > Rick Richardson writes: > > > I have the lcr module in my proxies properly distributing INVITES and > > maintaining the dialog throughout a sip call. Except for the BYE, and > > the reason is simply that that is a new transaction. So is the only way > > for me to reach the callee with a BYE message to find the proper gateway > > for it using the LCR module again? I'm guessing this or possibly AVPs > > would be the only method sending the request to the proper user. > > bye is in-dialog request and its request uri points to the right gw. so > you just t_relay in-dialog requests. > > -- juha

1 0

[Users] Using AVPs in regular expressions
by Papadopoulos Georgios 14 Mar '06

14 Mar '06

Hello, Is it possible to use AVPs with the TEXTOPS subst_ functions in the re part? For example, the following works, if I want to remove the prefix "sip." from the domain. subst_uri("/(.*)@(sip\.)?(.*)/\1@\3/i"); However if I put the prefix "sip." in AVP and try to use this in the re part of the subst_uri argument, then it does not work. avp_write("sip.", "s:tmp"); subst_uri("/(.*)@$avp(s:tmp)?(.*)/\1@\2/i"); thank you for any help George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Users] LCR and BYE
by Rick Richardson 14 Mar '06

14 Mar '06

I have the lcr module in my proxies properly distributing INVITES and maintaining the dialog throughout a sip call. Except for the BYE, and the reason is simply that that is a new transaction. So is the only way for me to reach the callee with a BYE message to find the proper gateway for it using the LCR module again? I'm guessing this or possibly AVPs would be the only method sending the request to the proper user. If AVPs are the best shot, how would I go about laying them out to store and retrieve the gw value? I still don't fully understand them. thanks Rick Richardson

2 1

[Users] LCR and BYE cont'd
by rick＠eltopia.com 14 Mar '06

14 Mar '06

My setup is such: 192.168.0.10 (initiating and closing UA) 192.168.0.52 (proxy) 192.168.0.90-91 (gateway and receiving UA) I set up the BYE to use the lcr routing and it seemed to behave itself the 200 OK went through to start the call. Then the agent (i'm using sipp on both sides) sent back an ACK and a BYE. However, the odd thing is that the proxy sent the ACK over to the from_uri domain, in this case 192.168.0.51, instead of sending it off to the gateway/receiver at 0.91. I looked in the logs and found that t_relay() had decided that there was no active transaction and so i'm guessing it tried to find the best place for it.. which was the from uri i'm guessing. That I guess is okay.. I'll have to find a way to keep the requests forwarding to the proper gateway.. any input is appreciated. Then the proxy went and did something really strange, it sent an INVITE to the receiving UA. According to ngrep, it was not relaying any messages from the initiating UA. It just sent it.. I have no idea why its doing that.. then things kinda go downhill from there. Anyone know why it would be doing this? Help would be appreciated. (logs and route script below) Rick Richardson Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: get_hdr_field: <To> [50]; uri=[sip:15095475551212@192.168.0.51:5060] Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: to body [sut <sip:15095475551212@192.168.0.51:5060>] Mar 14 14:15:11 amnesiac /sbin/openser[7554]: get_hdr_field: cseq <Cseq>: <1> <ACK> Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: get_hdr_body : content_length=0 Mar 14 14:15:11 amnesiac /sbin/openser[7554]: found end of header Mar 14 14:15:11 amnesiac /sbin/openser[7554]: parse_headers: flags=78 Mar 14 14:15:11 amnesiac /sbin/openser[7554]: t_lookup_request: start searching: hash=38888, isACK=1 Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: proceeding to pre-RFC3261 transaction matching Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: t_lookup_request: no transaction found Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG:tm:t_relay: forwarding ACK statelessly Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG: mk_proxy: doing DNS lookup... Mar 14 14:15:11 amnesiac /sbin/openser[7554]: check_via_address(192.168.0.10, 192.168.0.10, 0) Mar 14 14:15:11 amnesiac /sbin/openser[7554]: Sending: ACK sip:15095475551212@192.168.0.51:5060 SIP/2.0^M Record-Route: <sip:192.168.0.52;ftag=1;lr=on>^M Route: ^M Via: SIP/2.0/UDP 192.168.0.52;branch=0^M Via: SIP/2.0/UDP 192.168.0.10:5060^M From: sipp <sip:15095479429@1Reseller.com:5060>;tag=1^M To: sut <sip:15095475551212@192.168.0.51:5060>;tag=1^M Call-ID: 1.29663.192.168.0.10(a)sipp.call.id^M Cseq: 1 ACK^M Contact: sip:sipp@1Reseller.com:5060^M Max-Forwards: 70^M Subject: Performance Test^M Content-Length: 0^M ^M . Mar 14 14:15:11 amnesiac /sbin/openser[7554]: orig. len=365, new_len=452, proto=1 Mar 14 14:15:11 amnesiac /sbin/openser[7554]: DEBUG:destroy_avp_list: destroying list (nil) # U 2006/03/14 14:15:11.213144 192.168.0.10:5060 -> 192.168.0.52:5060 INVITE sip:15095475551212@192.168.0.51:5060 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag= 1..To: sut <sip:15095475551212@192.168.0.51>..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 INVITE..Contact: sip:sipp@1Reseller.co m:5060..Max-Forwards: 70..Subject: Performance Test..Content-Type: application/sdp..Content-Length: 136....v=0..o=user1 53655765 2353687 637 IN IP4 127.0.0.1..s=-..t=0 0..c=IN IP4 127.0.0.1..m=audio 10000 RTP/AVP 0..a=rtpmap:0 PCMU/8000.. # U 2006/03/14 14:15:11.268396 192.168.0.52:5060 -> 192.168.0.10:5060 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag=1 ..To: sut <sip:15095475551212@192.168.0.51>..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 INVITE..Server: OpenSer (1.0.0 (i386/li nux))..Content-Length: 0..Warning: 392 192.168.0.52:5060 "Noisy feedback tells: pid=7554 req_src_ip=192.168.0.10 req_src_port=5060 in_u ri=sip:15095475551212@192.168.0.51:5060 out_uri=sip:15095475551212@192.168.0.91;transport=udp via_cnt==1".... # U 2006/03/14 14:15:11.274677 192.168.0.52:5060 -> 192.168.0.91:5060 INVITE sip:15095475551212@192.168.0.91;transport=udp SIP/2.0..Record-Route: <sip:192.168.0.52;ftag=1;lr=on>..Via: SIP/2.0/UDP 192.168.0. 52;branch=z9hG4bK8e79.dc95dbe1.0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag=1..To: sut <sip:150 95475551212(a)192.168.0.51>..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 INVITE..Contact: sip:sipp@1Reseller.com:5060..Max-Forward s: 70..Subject: Performance Test..Content-Type: application/sdp..Content-Length: 136....v=0..o=user1 53655765 2353687637 IN IP4 127.0.0. 1..s=-..t=0 0..c=IN IP4 127.0.0.1..m=audio 10000 RTP/AVP 0..a=rtpmap:0 PCMU/8000.. # U 2006/03/14 14:15:11.277668 192.168.0.89:5060 -> 192.168.0.52:5060 SIP/2.0 180 Ringing..Route: sip:sipp@1Reseller.com:5060..Via: SIP/2.0/UDP 192.168.0.52;branch=z9hG4bK8e79.dc95dbe1.0.Via: SIP/2.0/UDP 1 92.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag=1..To: sut <sip:15095475551212@192.168.0.51>;tag=1..Call-ID: 1.29663.19 2.168.0.10@sipp.call.id..Contact: <sip:192.168.0.91:5060;transport=UDP>..Content-Length: 0.... # U 2006/03/14 14:15:11.277707 192.168.0.89:5060 -> 192.168.0.52:5060 SIP/2.0 200 OK..Route: sip:sipp@1Reseller.com:5060..Via: SIP/2.0/UDP 192.168.0.52;branch=z9hG4bK8e79.dc95dbe1.0.Via: SIP/2.0/UDP 192.16 8.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag=1..To: sut <sip:15095475551212@192.168.0.51>;tag=1..Call-ID: 1.29663.192.168 .0.10@sipp.call.id..Contact: <sip:192.168.0.91:5060;transport=UDP>..Content-Type: application/sdp..Content-Length: 136....v=0..o=user1 5 3655765 2353687637 IN IP4 127.0.0.1..s=-..c=IN IP4 127.0.0.1..t=0 0..m=audio 10000 RTP/AVP 0..a=rtpmap:0 PCMU/8000.. # U 2006/03/14 14:15:11.343159 192.168.0.52:5060 -> 192.168.0.10:5060 SIP/2.0 180 Ringing..Route: sip:sipp@1Reseller.com:5060..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com> ;tag=1..To: sut <sip:15095475551212@192.168.0.51>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Contact: <sip:192.168.0.91:5060;tra nsport=UDP>..Content-Length: 0.... # U 2006/03/14 14:15:11.345406 192.168.0.52:5060 -> 192.168.0.10:5060 SIP/2.0 200 OK..Route: sip:sipp@1Reseller.com:5060..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag= 1..To: sut <sip:15095475551212@192.168.0.51>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Contact: <sip:192.168.0.91:5060;transpor t=UDP>..Content-Type: application/sdp..Content-Length: 136....v=0..o=user1 53655765 2353687637 IN IP4 127.0.0.1..s=-..c=IN IP4 127 .0.0.1..t=0 0..m=audio 10000 RTP/AVP 0..a=rtpmap:0 PCMU/8000.. # U 2006/03/14 14:15:11.345985 192.168.0.10:5060 -> 192.168.0.52:5060 ACK sip:15095475551212@192.168.0.51:5060 SIP/2.0..Route: ..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com :5060>;tag=1..To: sut <sip:15095475551212@192.168.0.51:5060>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 ACK..Contact: si p:sipp@1Reseller.com:5060..Max-Forwards: 70..Subject: Performance Test..Content-Length: 0.... # U 2006/03/14 14:15:11.346006 192.168.0.10:5060 -> 192.168.0.52:5060 BYE sip:15095475551212@192.168.0.51:5060 SIP/2.0..Route: ..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com :5060>;tag=1..To: sut <sip:15095475551212@192.168.0.51:5060>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 2 BYE..Contact: si p:sipp@1Reseller.com:5060..Max-Forwards: 70..Subject: Performance Test..Content-Length: 0.... # U 2006/03/14 14:15:11.459551 192.168.0.52:5060 -> 192.168.0.51:5060 ACK sip:15095475551212@192.168.0.51:5060 SIP/2.0..Record-Route: <sip:192.168.0.52;ftag=1;lr=on>..Route: ..Via: SIP/2.0/UDP 192.168.0.52; branch=0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com:5060>;tag=1..To: sut <sip:15095475551212@192.168 .0.51:5060>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 ACK..Contact: sip:sipp@1Reseller.com:5060..Max-Forwards: 70..Subj ect: Performance Test..Content-Length: 0.... # U 2006/03/14 14:15:11.482459 192.168.0.52:5060 -> 192.168.0.91:5060 BYE sip:15095475551212@192.168.0.91;transport=udp SIP/2.0..Record-Route: <sip:192.168.0.52;ftag=1;lr=on>..Route: ..Via: SIP/2.0/UDP 192. 168.0.52;branch=z9hG4bK5e79.b6010d86.0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com:5060>;tag=1..To: s ut <sip:15095475551212@192.168.0.51:5060>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 2 BYE..Contact: sip:sipp@1Reseller.co m:5060..Max-Forwards: 70..Subject: Performance Test..Content-Length: 0.... # U 2006/03/14 14:15:11.564502 192.168.0.52:5060 -> 192.168.0.91:5060 INVITE sip:15095475551212@192.168.0.91;transport=udp SIP/2.0..Record-Route: <sip:192.168.0.52;ftag=1;lr=on>..Via: SIP/2.0/UDP 192.168.0. 52;branch=z9hG4bK8e79.dc95dbe1.0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com>;tag=1..To: sut <sip:150 95475551212(a)192.168.0.51>..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 1 INVITE..Contact: sip:sipp@1Reseller.com:5060..Max-Forward s: 70..Subject: Performance Test..Content-Type: application/sdp..Content-Length: 136....v=0..o=user1 53655765 2353687637 IN IP4 127.0.0. 1..s=-..t=0 0..c=IN IP4 127.0.0.1..m=audio 10000 RTP/AVP 0..a=rtpmap:0 PCMU/8000.. # U 2006/03/14 14:15:11.564701 192.168.0.52:5060 -> 192.168.0.91:5060 BYE sip:15095475551212@192.168.0.91;transport=udp SIP/2.0..Record-Route: <sip:192.168.0.52;ftag=1;lr=on>..Route: ..Via: SIP/2.0/UDP 192. 168.0.52;branch=z9hG4bK5e79.b6010d86.0..Via: SIP/2.0/UDP 192.168.0.10:5060..From: sipp <sip:15095479429@1Reseller.com:5060>;tag=1..To: s ut <sip:15095475551212@192.168.0.51:5060>;tag=1..Call-ID: 1.29663.192.168.0.10@sipp.call.id..Cseq: 2 BYE..Contact: sip:sipp@1Reseller.co m:5060..Max-Forwards: 70..Subject: Performance Test..Content-Length: 0.... ########################################## debug=9 fork=yes log_stderror=no listen=192.168.0.52 port=5060 children=4 log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL0 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://serusr:thisisfun@192.168.0.54/ser" loadmodule "//lib/openser/modules/mysql.so" loadmodule "//lib/openser/modules/sl.so" loadmodule "//lib/openser/modules/tm.so" loadmodule "//lib/openser/modules/rr.so" loadmodule "//lib/openser/modules/maxfwd.so" loadmodule "//lib/openser/modules/usrloc.so" loadmodule "//lib/openser/modules/auth.so" loadmodule "//lib/openser/modules/auth_db.so" loadmodule "//lib/openser/modules/registrar.so" loadmodule "//lib/openser/modules/uri.so" loadmodule "//lib/openser/modules/uri_db.so" #loadmodule "//lib/openser/modules/mediaproxy.so" loadmodule "//lib/openser/modules/textops.so" loadmodule "//lib/openser/modules/avpops.so" #loadmodule "//lib/openser/modules/domain.so" loadmodule "//lib/openser/modules/reseller.so" loadmodule "//lib/openser/modules/acc.so" loadmodule "//lib/openser/modules/lcr.so" loadmodule "//lib/openser/modules/xlog.so" modparam("auth_db|reseller|lcr|uri_db|usrloc|acc", "db_url", "mysql://serusr:thisisfun@192.168.0.54/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") # -- acc params # modparam("acc", "db_flag", 1) modparam("acc", "failed_transaction_flag", 1) modparam("acc", "db_missed_flag", 1) modparam("acc", "report_cancels", 1) modparam("acc", "multi_leg_enabled", 1) modparam("acc", "src_leg_avp_id", 110) modparam("acc", "dst_leg_avp_id", 110) modparam("acc", "acc_dst_leg_column", "dst_leg") modparam("acc", "acc_src_leg_column", "src_leg") route { xlog("L_DBG", "TRACE: Message received."); # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method != "REGISTER") { record_route(); }; xlog("L_DBG", "TRACE: Record routing."); # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); return; }; xlog("L_DBG", "TRACE: Done with loose routing."); if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="BYE") { route(3); return; } route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- xlog("L_DBG","TRACE: Entered default message handler"); if (!t_relay()) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- xlog("L_DBG","TRACE: Entered INVITE handler."); if (uri=~"^sip:1[0-9]{10}@") { strip(1); }; xlog("L_DBG","TRACE: Message not addressed to us."); # it should check to see if the number is managed locally.. # if not, send to pstn # if (from_gw()) { xlog("L_DBG","TRACE: Message is from a gateway.") ; route(6); return; }; }; route(5); route(1); } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- xlog("L_DBG","TRACE: Entered PSTN handler."); if (!load_gws()) { sl_send_reply("500", "Server Internal Error - Cannot load gateways"); return; }; xlog("L_DBG","TRACE: Loading gateways"); if (!next_gw()) { xlog("L_DBG","TRACE: Couldn't find a gateway."); sl_send_reply("503", "Service not available - No gateways"); return; }; t_on_failure("1"); avp_write("i:45", "inv_timeout"); } route[6] { # ------------------------------------------------------------------ # Local Number Handler # ------------------------------------------------------------------ if (!fwd_usr_ip()){ sl_send_reply("503", "Wrong number"); } forward(uri:host, uri:port); } failure_route[1] { next_gw(); t_relay(); }

1 0

[Users] get call status from onfailure_route
by jimmy way 14 Mar '06

14 Mar '06

Hi all, In my applicaton, I need to call from a openser to other openser or a gateway. I don't know which openser or gateway is working fine. So I want it work like this: route call to first server, if fail(408 or 404/403 etc.), then route to next server. That's what I want to do. 1st, I want to use onreply_route. After test, I find it can only catch those case that callee answer 4xx message. If timeout(408) or caller cancel the call(487), onreply_route cannot catch that(Because callee ONREPLY) 2nd, I want to use failure_route. After test, I find: 1 I cannot use status to find what status the call in. 2 I find the msg is orient request message, I can't get the status too. 3rd, setflag is no use because it only tag the packet you receive it now. So, Is there any other way to do that, how to write cfg file or how to coding BTW, Now I am using version 0.9.x, and I didn't find anything useful in the new version for this case. thank you Br, Jimmy __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Users] 302 Moved Temporarily
by Diego Valencia 14 Mar '06

14 Mar '06

Hi guys, I want to do that SER does not accept "302 Moved Temporarily" messages from UA. I don't want to permit to do forwarding from UAs. Is it posible? thanks! Diego ____________________ Diego Valencia Network Support IP-Tel SA Tel: 0351-5890002 Movil: 0351-155194286

2 1

Re: [Users] FW: trouble with tls support
by Bogdan-Andrei Iancu 14 Mar '06

14 Mar '06

Hi, please run openser is full debug mode (debug=9) and post the log relevant to the TLS connection. regards, bogdan shahriyar wrote: > > > > > ------------------------------------------------------------------------ > > *From:* shahriyar [mailto:shahriyar@vonair.com] > *Sent:* Tuesday, March 14, 2006 2:00 PM > *To:* 'team(a)openser.org' > *Subject:* trouble with tls support > > > > Hi, > > I tried to setup openser with tls support for snom 360 soft phone. > I am getting following ssldump messages upon register of a softphone. > > I am also attaching the openser.cfg file. > > > > [root@localhost sbin]# ssldump -i eth0 port 5061 > > New TCP connection #1: 192.168.10.115(1673) <-> 192.168.10.136(5061) > > 1 1 0.0807 (0.0807) C>S Handshake > > ClientHello > > Version 3.1 > > cipher suites > > TLS_RSA_WITH_RC4_128_MD5 > > TLS_RSA_WITH_RC4_128_SHA > > TLS_RSA_WITH_NULL_MD5 > > TLS_RSA_WITH_NULL_SHA > > TLS_DH_anon_WITH_3DES_EDE_CBC_SHA > > TLS_DH_anon_WITH_RC4_128_MD5 > > TLS_RSA_WITH_DES_CBC_SHA > > TLS_RSA_EXPORT1024_WITH_RC4_56_SHA > > TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA > > TLS_DH_anon_WITH_DES_CBC_SHA > > compression methods > > NULL > > 1 0.8727 (0.7920) S>C TCP FIN > > > > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

Re: [Users] trouble with mySql
by Bogdan-Andrei Iancu 14 Mar '06

14 Mar '06

Hi, to compile mysql also, either remove it from Makefile from the "exclude_modules" and do "make", either do "make modules modules=modules/mysql". regards, bogdan shahriyar wrote: > Hi, > > I am trying to compile openser with tls. But authentication cannot > be enabled as mySql.so module is not created. > > Regards > > shah > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Serusers] Re: Serusers Digest, Vol 35, Issue 13
by C. Ed Felt 14 Mar '06

14 Mar '06

1 0

RE: [Serusers] route to PSTN
by McAvan, Troy-P29897 14 Mar '06

14 Mar '06

Tobias, Thank you for your time and explanation. For =~ what does this mean? Does the = means something particular, and then does the ~ means something particular as well? Also one last thing, what does the ^ mean? Thanks again, Troy -----Original Message----- From: Tobias Lindgren [mailto:tobias.lindgren@ip-only.se] Sent: Tuesday, March 14, 2006 11:48 AM To: McAvan, Troy-P29897 Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] route to PSTN I'm far from an expert myselfe, but here goes.. (inlined in your text..): Br, /T McAvan, Troy-P29897 said the following on 2006-03-14 19:32: > Would it be possible for someone to explain what each line means? > if(method=="INVITE") - If the SIP request method is an "INVITE", proceed with the code between { and }. > { > if(uri =~ "^sip9.*@.*") - If the URI-field in the SIP request starts with and is like <sip9><anything>@<anything> proceed. > { > rewritehostport("ipofmediatrix:port"); - Rewrite the host and port part of the SIP uri, eg. this is what I would like to do to for example forward this INVITE to another destination. > if(!t_relay()) - Relay the message to the new destination specified with rewritehostport(). Remember this SIP-conversation and statefully inspection of all the following messages (transactions) following this INVITE (read more about t_relay in the "tm"-module README-file). If there is an error in any of the following transactions (eg. a 404 Not Found SIP message), proceed with this code snippet. > { > sl_reply_error(); - Replay statelessly with the errormessage found in t_relay (in my example, 404 Not Found). > }; > }; > }; > > I am not a software guy and it would be great if someone could explain it line by line possibly. > > Troy > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Serusers] route to PSTN
by McAvan, Troy-P29897 14 Mar '06

14 Mar '06

Would it be possible for someone to explain what each line means? if(method=="INVITE") { if(uri =~ "^sip9.*@.*") { rewritehostport("ipofmediatrix:port"); if(!t_relay()) { sl_reply_error(); }; }; }; I am not a software guy and it would be great if someone could explain it line by line possibly. Troy

2 1

[Serusers] help with textops
by Steve Blair 14 Mar '06

14 Mar '06

I'd like to replace just the domain name in the From field with a different value. I was looking at using either replace or subst but I cannot seem to get the regular expression right. Does anyone have a working example? Thanks,Steve -- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104 voice: 215-573-8396 215-746-8001 fax: 215-898-9348 sip:blairs@net.isc.upenn.edu

2 2

RE: [Serusers] Sample SER + Asterisk conf?
by Bart J. Smit 14 Mar '06

14 Mar '06

I can make calls from a public UA registered with SER to an internal UA registered with Asterisk. The problem is the call tear-down; when I hang up from the public side, the call is torn down properly but when I hang up from the private side, the public UA never gets the BYE packet. When I capture the sip packets from the public UA I get this: 192.168.20.242 -> 65.126.236.148 SIP/SD Request: INVITE sip:0509@pbx.nexusmgmt.com, with session description 65.126.236.148 -> 192.168.20.242 SIP Request: OPTIONS sip:nexphone.nexusmgmt.com 65.126.236.148 -> 192.168.20.242 SIP Status: 100 trying -- your call is important to us 65.126.236.148 -> 192.168.20.242 SIP Status: 404 User Not Found 65.126.236.148 -> 192.168.20.242 SIP 180 Ringing 65.126.236.148 -> 192.168.20.242 SIP/SD Status: 200 OK, with session description 192.168.20.242 -> 65.126.236.148 SIP Request: ACK sip:65.126.236.148;r2=on When I hang up from the outside I get: 192.168.20.242 -> 65.126.236.148 SIP Request: BYE :65.126.236.148;r2=on 65.126.236.148 -> 192.168.20.242 SIP Status: 200 OK I am most worried about the 404 packet; my guess is that it is where the session breaks. It has these headers: From: <sip:admin@nexphone.nexusmgmt.com> To: <sip:nexphone.nexusmgmt.com> Warning: 392 65.126.236.148:5060 "Noisy feedback tells: pid=23798 req_src_ip=80.176.149.91 req_src_port=5060 in_uri=sip:nexphone.nexusmgmt.com out_uri=sip:nexphone.nexusmgmt.com via_cnt==1" I can't work out why the public UA should send a packet to sip:nexphone.nexusmgmt.com instead of sip:0509@pbx.nexusmgmt.com. I attach my config files and the SIP packets from the network sniffer. Thanks, Bart... -----Original Message----- From: Brett N [mailto:brettlist@nemeroff.com] Sent: 14 March 2006 16:03 To: Vitaly Nikolaev Cc: Bart J. Smit; serusers(a)lists.iptel.org Subject: RE: [Serusers] Sample SER + Asterisk conf? That really shouldn't be necessary. Make sure the approproate domains or IPs are listed as "aliases" in ser.cfg. What is the problem you are having? Perhaps if you tell us what is wrong, we can help fix it? On Tue, March 14, 2006 9:03 am, Vitaly Nikolaev wrote: > I had a problem long time ago with 0.8.14m that ser and asterisk (or any > b2bua) can not work on same IP address on different ports, somewhere in > the logic of ser it mistakes in "if myself" function, and since then I > always have them on same server but different IP addresses.... > > You might try it > > > -----Original Message----- > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On > Behalf Of Bart J. Smit > Sent: Tuesday, March 14, 2006 9:59 AM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Sample SER + Asterisk conf? > > I'm still having problems with ser and asterisk on the same public > server. > > Could anybody send me a tarball of their ser.cfg and sip.conf off-list, > so I can do a sanity check against my files? > > Much appreciated. > > Bart... > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Users] New module: statistics script support
by Bogdan-Andrei Iancu 14 Mar '06

14 Mar '06

Hi, The devel version contains a new module - statistics module: The Statistics module is a wrapper over the internal statistics manager, allowing the script writer to dynamically define and use of statistic variables. By bringing the statistics support into the script, it takes advantage of the script flexibility in defining logics, making possible implementation of any kind of statistic scenario. All statistics variables defined via this module will be registered as "script" to the statistics core manager. Ex. of usages: - count number of requests based on types, body, destination, source, etc - if signalling is reliable (lossless), to count active calls to a destination - whatever else yo can imagine :) for more info, please refer to the online documentation: http://openser.org/docs/modules/1.1.x/statistics.html regards, bogdan

1 0

Re: [Users] Register Replication Example
by Arek Bekiersz 14 Mar '06

14 Mar '06

Hello, It depends what domains the boxes run. IMHO if every box runs separate domain(s), you don't need to replicate registration information (at least for basic service). Every box should keep 'HLR' register for his own domain(s) only. Then every box handles requests for its own domain(s) correctly. If there is need to communicate between proxies, it's done on SIP level, not on underlaying 'location' dbase. Or someone please correct me :-))) -- Regards, Arek Bekiersz Lenir wrote: > Hello guys, > I was wondering if anybody could share an example config using > Registration Replication. I have two OpenSER boxes right now. In the > near future I will be adding a third one. > Question, If I recall correctly, I think I saw a post saying that > registration replication only works on a 1-to-1 basis? Is this correct? > What would be done for someone who has 3+ openser boxes, what can be > done so that they all know about each other and who’s registered where?

2 1

RE: [Serusers] Sample SER + Asterisk conf?
by Vitaly Nikolaev 14 Mar '06

14 Mar '06

That it... that exactly problem I had! I fixed it by having secondary IP on the box without much thinking about other ways, thanks for the tip!!! -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Tuesday, March 14, 2006 11:23 AM To: Vitaly Nikolaev Cc: Bart J. Smit; serusers(a)lists.iptel.org Subject: Re: [Serusers] Sample SER + Asterisk conf? Be carefull when you define alias or listen parameters. If you do not define any port, by default ALL ports will match myself and therefore all those requests going to the other program (not SER) will not reach it because SER will treat the request targeted for itself. In order to solve it, just add the port where SER is listening to the alias parameter and you should not have anymore this problem. Hope it helps, Samuel. 2006/3/14, Vitaly Nikolaev <vnikolaev(a)intermedia.net>: > I had a problem long time ago with 0.8.14m that ser and asterisk (or any > b2bua) can not work on same IP address on different ports, somewhere in > the logic of ser it mistakes in "if myself" function, and since then I > always have them on same server but different IP addresses.... > > You might try it > > > -----Original Message----- > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On > Behalf Of Bart J. Smit > Sent: Tuesday, March 14, 2006 9:59 AM > To: serusers(a)lists.iptel.org > Subject: [Serusers] Sample SER + Asterisk conf? > > I'm still having problems with ser and asterisk on the same public > server. > > Could anybody send me a tarball of their ser.cfg and sip.conf off-list, > so I can do a sanity check against my files? > > Much appreciated. > > Bart... > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

RE: [Serusers] Sample SER + Asterisk conf?
by Vitaly Nikolaev 14 Mar '06

14 Mar '06

I had a problem long time ago with 0.8.14m that ser and asterisk (or any b2bua) can not work on same IP address on different ports, somewhere in the logic of ser it mistakes in "if myself" function, and since then I always have them on same server but different IP addresses.... You might try it -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Bart J. Smit Sent: Tuesday, March 14, 2006 9:59 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Sample SER + Asterisk conf? I'm still having problems with ser and asterisk on the same public server. Could anybody send me a tarball of their ser.cfg and sip.conf off-list, so I can do a sanity check against my files? Much appreciated. Bart... _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

3 2

RE: [Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 14 Mar '06

14 Mar '06

Hi again, isn't there anyone who uses the development SER version ? Anyone using/testing presence server ? How can I contact the developers ? (serdev(a)lists.iptel.org does not accept my emails) Maybe someone could point me to another presence server. Is there any presence server available for trying ? I am desperately trying to build some presence server. Please help me... Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Tuesday, March 14, 2006 9:12 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Problem starting SER with Presence support Hi everyone, I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router I have libxml2 installed and the sources compile fine. After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. Unfortunately ser does not start with the following error: # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f /root/ser/etc/ser/ser.cfg 0(28118) parse error (11,1-5): syntax error 0(28118) parse error (11,1-5): ERROR: bad config file (2 errors) Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : # ls -adl /tmp/ drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config By any chance, is there any user/developer who may have dealt with thşs problem before ? Thanks, ilker _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://271570.sigclick.mailinfo.com/sigclick/03060301/0E014E0E/09014E06/911…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

3 4

Re: [Users] Register Replication Example
by Arek Bekiersz 14 Mar '06

14 Mar '06

Hello, It depends what domains the boxes run. IMHO if every box runs separate domain(s), you don't need to replicate registration information (at least for basic service). Every box should keep 'HLR' register for his own domain(s) only. Then every box handles requests for its own domain(s) correctly. If there is need to communicate between proxies, it's done on SIP level, not on underlaying 'location' dbase. Or someone please correct me :-))) -- Regards, Arek Bekiersz Lenir wrote: > Hello guys, > I was wondering if anybody could share an example config using > Registration Replication. I have two OpenSER boxes right now. In the > near future I will be adding a third one. > Question, If I recall correctly, I think I saw a post saying that > registration replication only works on a 1-to-1 basis? Is this correct? > What would be done for someone who has 3+ openser boxes, what can be > done so that they all know about each other and who’s registered where?

1 0

[Users] Register Replication Example
by Lenir 14 Mar '06

14 Mar '06

Hello guys, I was wondering if anybody could share an example config using Registration Replication. I have two OpenSER boxes right now. In the near future I will be adding a third one. Question, If I recall correctly, I think I saw a post saying that registration replication only works on a 1-to-1 basis? Is this correct? What would be done for someone who has 3+ openser boxes, what can be done so that they all know about each other and who's registered where? Thanks in advance. Lenir

1 0

[Serusers] Sample SER + Asterisk conf?
by Bart J. Smit 14 Mar '06

14 Mar '06

I'm still having problems with ser and asterisk on the same public server. Could anybody send me a tarball of their ser.cfg and sip.conf off-list, so I can do a sanity check against my files? Much appreciated. Bart...

1 0

[Serusers] route to PSTN
by McAvan, Troy-P29897 14 Mar '06

14 Mar '06

I am trying to obtain information on how to set up SIP SER so that a SIP phone can call a PSTN phone. I do have a Mediatrix gateway. The sip user would need to dial 9 and then the phone number to go to the PSTN. If someone could explain this to me in very simple terms, it would be greatly appreciated. Thanks, Troy

3 2

RE: [Users] PA module not compiling correctly in 1.0.1
by Justin Pearce 14 Mar '06

14 Mar '06

Hey, I already tried doing this before I posted to the mailing list. I did have the same issue with the mysql module, but read somewhere about making a slight change to the mysql makefile. After doing this, the mysql module compiled properly. I am just not sure if there is something similar for the pa module and, if so, what it is. Thanks, Justin Pearce Price Video Productions Justin(a)PriceVideo.com 361-572-3810 800-733-3810 Fax: 361-572-3894 www.PriceVideo.com -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Saturday, March 11, 2006 10:18 AM To: Justin Pearce Cc: users(a)openser.org Subject: Re: [Users] PA module not compiling correctly in 1.0.1 Hello, to install only the pa module try: TLS=1 make modules modules=modules/pa TLS=1 make install modules=modules/pa Or for all modules installation: TLS=1 make all exclude_modules="" TLS=1 make install exclude_modules="" Cheers, Daniel On 03/10/06 16:18, Justin Pearce wrote: > > Hey all, > > I am in the process of setting up an openser machine for sip software > testsing to replace our ser machine. This decision came about due to > ser not supporting TLS in a readily available form and due to the > seeming stagnation of the ser project. I recently downloaded the > 1.0.1-tls source to compile. While in the process of duplicating our > configuration, I found that openser was complaining that there was a > mismatch between the module and the core, stating that the module was > 1.0.0 and the core was 1.0.1-tls. Am I missing something in the "make > modules" command (make exclude_modules="" modules)? Do I need to add > something to the make file for pa.so to make it compile for the > appropriate version? Any help would be appreciated. > > Justin Pearce > > Price Video Productions > > Justin(a)PriceVideo.com <mailto:Justin@PriceVideo.com> > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

1 0

Re: [Serusers] Can't get SERWEB to work
by Tyler Farmer 14 Mar '06

14 Mar '06

I am having the same problem with the Function aggregate_methods() does not exist error in IE. I have installed the classkit extension, double checked the extension=classkit.so in the php.ini file and after that didn't work I downgraded to PHP 4.4.2. I still have the problem. I get the following error message in the Apache log but am unsure what Unknown on line 0 is referencing: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 >>> Karel Kozlik <karel(a)iptel.org> 3/10/2006 12:52 AM >>> Hi, is the classkit extension realy loaded? Are there any errors in php log or appache log? Karel George Lambson napsal(a): > Hi all, > > Having this error come up after following all of the instructions and troubleshooting. > > Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit > > I am running FC4 with php, php-mysql, php-devel, php-pear, and mysql all installed with yum from the default repositories. > > I went ahead and put the serweb folder in my /var/www/html directory to see if I could get it working with the intent of moving it and setting up an alias later. > > Here are some snippets of my many different configuration files. > > > _php.ini:_ > > extension_dir = "/usr/lib/php/modules" > extension=classkit.so > > -- also the mysql.so files are loaded from the /etc/php directory > > > _config_data_layer.php_ > > $config->data_sql->type="mysql"; //type of db host, enter "mysql" for MySQL or "pgsql" for PostgreSQL > > $i=0; > $config->data_sql->host[$i]['host']="localhost"; //database host > $config->data_sql->host[$i]['port']=""; //database port - leave empty for default > $config->data_sql->host[$i]['name']="ser"; //database name > $config->data_sql->host[$i]['user']="ser"; //database conection user > $config->data_sql->host[$i]['pass']="******"; //database conection password > > > _config_paths.ini_ > > $config->root_path="/serweb/html/"; > > /* roo uri of your server */ > if (isset($_SERVER['rcsip.myservername.ext'])) > $config->root_uri="http://".$_SERVER['rcsip.myservername.ext']; > else > $config->root_uri=""; > > > _php.conf_ > > LoadModule php5_module modules/libphp5.so > > AddHandler php5-script .php .phtml > AddType text/html .php .phtml > > DirectoryIndex index.php > > > _ser.cfg_ > > debug=3 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > fork=no > log_stderror=yes > */ > > #alias=tcp:myip:5060 > #alias=udp:myip:5060 > > #check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > fifo_db_url="mysql://ser:heslo@localhost/ser" > > # ------------------ module loading ---------------------------------- > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > loadmodule "/usr/local/lib/ser/modules/uri.so" > loadmodule "/usr/local/lib/ser/modules/uri_db.so" > loadmodule "/usr/local/lib/ser/modules/domain.so" > loadmodule "/usr/local/lib/ser/modules/nathelper.so" > loadmodule "/usr/local/lib/ser/modules/textops.so" > loadmodule "/usr/local/lib/ser/modules/exec.so" > > # ----------------- setting module-specific parameters --------------- > > modparam("auth_db|domain|uri_db|usrloc", "db_url", "mysql://ser:******@localhost/ser") > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > > modparam("nathelper", "rtpproxy_disable", 0) > modparam("nathelper", "natping_interval", 30) > > modparam("usrloc", "db_mode", 2) > > modparam("registrar", "nat_flag", 6) > > modparam("rr", "enable_full_lr", 1) > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] starting ser
by D'Addelfio Davide 14 Mar '06

14 Mar '06

Hi, I've tried to start ser using command <serctl start> but receive this error: PID file /var/run/ser.pid does not exist - SER start failed Could anyone help me in some way? Thanks

2 1

[Serusers] problem with zaprtc module instalation
by Marco Passarinho 14 Mar '06

14 Mar '06

I get this error when I do "make load26" in /usr/local/src/bri-stuff.0.0.2/zaprtc-for-2.6 directory. I read in a post that it is irq problem and then I disabled in bios my usb ports,paralel port, game port in a way to release irqs, but it continues with the same error message. Anyone who got the same error? Please help Marco Dias

1 0

[Serusers] Problem with zaprtc module installation
by Marco Passarinho 14 Mar '06

14 Mar '06

I get this error when I do "make load26" in /usr/local/src/bri-stuff.0.0.2/zaprtc-for-2.6 directory. I read in a post that it is irq problem and then I disabled in bios my usb ports,paralel port, game port in a way to release irqs, but it continues with the same error message. Anyone who got the same error? Please help Marco Dias

1 0

[Serusers] starting ser
by D'Addelfio Davide 14 Mar '06

14 Mar '06

Hi, I've tried to start ser using command <serctl start> but receive this error: PID file /var/run/ser.pid does not exist - SER start failed Could anyone help me in some way? Thanks

1 0

[Users] trouble with mySql
by shahriyar 14 Mar '06

14 Mar '06

Hi, I am trying to compile openser with tls. But authentication cannot be enabled as mySql.so module is not created. Regards shah

1 0

[Serusers] starting ser without mysql
by D'Addelfio Davide 14 Mar '06

14 Mar '06

Hi everyone, i'm totally newest in SER and i'm installing it on Red Hat ES. When I try to configure a new user by serctl, he gives me an error cause he can't try mySql, can I use SER without mysql? Thanks for answer, regards Davide

1 0

[Users] FW: trouble with tls support
by shahriyar 14 Mar '06

14 Mar '06

_____ From: shahriyar [mailto:shahriyar@vonair.com] Sent: Tuesday, March 14, 2006 2:00 PM To: 'team(a)openser.org' Subject: trouble with tls support Hi, I tried to setup openser with tls support for snom 360 soft phone. I am getting following ssldump messages upon register of a softphone. I am also attaching the openser.cfg file. [root@localhost sbin]# ssldump -i eth0 port 5061 New TCP connection #1: 192.168.10.115(1673) <-> 192.168.10.136(5061) 1 1 0.0807 (0.0807) C>S Handshake ClientHello Version 3.1 cipher suites TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_NULL_MD5 TLS_RSA_WITH_NULL_SHA TLS_DH_anon_WITH_3DES_EDE_CBC_SHA TLS_DH_anon_WITH_RC4_128_MD5 TLS_RSA_WITH_DES_CBC_SHA TLS_RSA_EXPORT1024_WITH_RC4_56_SHA TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA TLS_DH_anon_WITH_DES_CBC_SHA compression methods NULL 1 0.8727 (0.7920) S>C TCP FIN

1 0

[Users] Route in INVITE
by Helge Waastad 14 Mar '06

14 Mar '06

Hi, I just wonder if this is according to RFC. I have a UA (ekiga) which adds a Route:<OBP>;lr in INVITE Is this "legal"? At least in default scripts, it's being loose routed, and not following normal message processing... br hw, -- Helge Waastad Senior Konsulent Smartnet

5 14

[Serusers] Problem starting SER with Presence support
by İlker Aktuna (Koç.net) 14 Mar '06

14 Mar '06

Hi everyone, I am trying to run SER with presence server support. That's why I'm downloading the development sources with command: cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router I have libxml2 installed and the sources compile fine. After that I try to start ser with attached config file "ser1.cfg". Actually, it is the simple config from the gettingstarted guide hello world part. Unfortunately ser does not start with the following error: # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f /root/ser/etc/ser/ser.cfg 0(28118) parse error (11,1-5): syntax error 0(28118) parse error (11,1-5): ERROR: bad config file (2 errors) Line 11 has the "fifo" file definition. My /tmp folder settings seem ok : # ls -adl /tmp/ drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ If I remove fifo line from the config (as in ser2.cfg) , ser starts but I guess that's not the right way. Because that time I can't register any clients and "serctl" command gives following error: Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config By any chance, is there any user/developer who may have dealt with thşs problem before ? Thanks, ilker <http://271570.sigclick.mailinfo.com/sigclick/05060305/0F014506/00014E02/171…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] mysql configuration and serctl
by İlker Aktuna (Koç.net) 14 Mar '06

14 Mar '06

Hi, Thanks for your reply. I am mostly interested in the presence server part. That's why I need to use the development version. I guess 0.9.6 does not include presence server, right ? Isn't there anyone who may have come across the problem I get now ? Any developer who may be reading this ? Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: Monday, March 13, 2006 6:23 PM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] mysql configuration and serctl I am not entirely sure, but I think SER has a problem creating ser_fifo for some reason. Your directory settings are fine too. I think you should not use CVS to install SER. Those sources are most probably under development and are being changed constantly. So, instead, download a stable SER version (I would suggest using 0.9.6, which is the latest) from iptel.org <http://iptel.org/> and install it right upon your existing version (read INSTALL file first on how to specify the installation directory). If you have a way to remove previous installation first, that would be even better. Best of luck :) On 3/13/06, İlker Aktuna (Koç. net ) <ilkera(a)koc.net > wrote: Hi, I downloaded the ser sources with cvs (following command): cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router I am not sure of the version. How can I check that ? If I use the "serctl ul show" command , I get this response: Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config My /tmp/ folder permissions: # ls -adl /tmp/ drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ In messages file I get these: Mar 13 08:24:02 asterisk1 /root/ser/sbin/ser[15292]: ERROR: receive_fd: EOF on 21 Mar 13 08:24:02 asterisk1 /root/ser/sbin/ser[15292]: ERROR: receive_fd: EOF on 22 Mar 13 08:45:46 asterisk1 ser: parse error (12,1-5): syntax error Mar 13 08:45:46 asterisk1 ser: parse error (12,1-5): Mar 13 08:53:05 asterisk1 ser: parse error (12,1-5): syntax error Mar 13 08:53:05 asterisk1 ser: parse error (12,1-5): Mar 13 08:57:15 asterisk1 ser: parse error (12,1-5): syntax error so what should I do ? <http://271570.sigclick.mailinfo.com/sigclick/00060504/02024905/04084803/221…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] LCR Module question
by Ryan Pagquil 13 Mar '06

13 Mar '06

Hi, Anyone could explain what are the basic functions of the fields of gw, lcr and gw_grp tables of the LCR module? I'm new with this module and I want to fully understand how this module works. Sample config and database entries will greatly help. Thanks in advance, Ryan

2 2

[Serusers] Help with failure route
by Cecilia Muaddi 13 Mar '06

13 Mar '06

Hello, I am trying to setup the ser.cfg to perform failure route. I have two PSTN gateways and would like to forward the INVITE to gateway 2 if gateway 1 failed. My ser.cfg is as follows: route{ xlog("L_NOTICE", ">>>>>>>>>>>>>> Proccessing method %rm from %fu <<<<<<<<<<<<<\n"); if ((method=="REGISTER") || (method=="NOTIFY") || (method=="OPTIONS")) { xlog ("L_NOTICE", "REGISTER"); sl_send_reply("200", "ok"); break; } rewriteuri("sip:1000@71.137.189.10:21100"); t_on_failure("1"); t_relay(); } failure_route[1] { append_branch("sip:1000@71.137.189.10:22100"); t_on_failure("2"); t_relay(); } failure_route[2] { append_branch("sip:1000@71.137.189.10:23100"); t_relay(); } Gateway 71.137.189.10:21100 returns a 404 NOT FOUND to SER, and I see SER proceed to send the INVITE to 71.137.189.10:22100. The 2nd gateway returns 183 (proceed). I was expecting SER to forward the SDP from 71.137.189.10:22100, however, the SDP actually was the SDP from gateway 1. How can I get SER to forward the reply from GWY2 and update the SDP information? Thanks Cecilia Muaddi

2 1

[Users] 30 seconds between physical cancel and openser cancel receiving
by Helge Waastad 13 Mar '06

13 Mar '06

Hi, I'm not too familiar with your PSTN equimpent, but my experience with Cisco is that by adding session scripts (tcl) to catch disc_prog_ind events on your PSTN connections, you can achieve have BYE messages initated the moment the PSTN leg hangs up.. br hw -- Helge Waastad Senior Konsulent Smartnet

1 0

[Serusers] How to read SERuser list archives offline?
by Ladislav Andel 13 Mar '06

13 Mar '06

Hi, if I download serusers archives what is the most comfortable way of reading it and searching for information OFFLINE? If I search through as a plain text it is not very readable. Do you know any good tool which makes it as a tree of subjects again as can be seen in weblist of SER topics? Thanks for any hints. Ladislav

1 0

[Serusers] g.729
by jidn 13 Mar '06

13 Mar '06

Hi list, Somebody know how I can put g.729 into wav file. Thanks, Pablo

2 1

[Serusers] g729 proxy
by roger leszczynski 13 Mar '06

13 Mar '06

i am using rtp proxy, and i need to use g729, but it doesnt work....any ideas what i can do? Also anyone have an example set up how to keep cdrs, and use pdt modules to foward to appropiate sip servers?

1 0

[Serusers] dbtext authentication and password encryption
by Istvan Hubay Cebrian 13 Mar '06

13 Mar '06

Hi, I am currently deploying SER on a Linksys WRT54GS v1.1 router. I am using dbtext for authentication purposes. Lately I noticed that the user’s passwords are stored as text. My question is: if there is anyway in which I could encrypt these passwords? May-be using another module? Any information will be much appreciated. Thanks -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.2.0/276 - Release Date: 07-03-2006

2 2

[Users] 30 seconds between physical cancel and openser cancel receiving
by Florian Fainelli 13 Mar '06

13 Mar '06

Hello all, I have playing around with a Teles VoIP box (ISDN phone to VoIP) and each time I make a call, I have to wait 30 seconds having really canceled the call (or bye) to see the cancel/bye being sent to the openser. Is there anything particular I should add in my configuration in order to avoid this 30 seconds latency ? I am wishing to make accounting and therefore I can have any latency :) Thank you very much in advance for your answer. -- Cordialement, Florian Fainelli --------------------------------------------- 5, rue Charles Fourier Chambre 1511 91011 Evry http://www.alphacore.net (+33) 01 60 76 64 86 (+33) 06 09 02 64 95 --------------------------------------------- Institut National des Télécommunications http://www.int-evry.fr/telecomint ---------------------------------------------

2 1

[Users] OPTIMAL HW to Asterisk and Openser
by Tóth Péter 13 Mar '06

13 Mar '06

Helo! I have a very basic question: If I would like to realize an 'Asterisk with Openser' system, with about 2000 SIP clients, and about 15-20 H.323 clients. Do I need a database, or is it ok from conf-file? I was searching on the web, what kind of hw requirement is needed to Openser, but I did not found anything. If I try to register 2000 client's altogether, maybe with mysql database, wat is the minimum platform? Is this enough? Openser+Database Dell SC420 P4 2,8GHz 1GB RAM Asterisk Dell Sc1420 Xeon 3GHz, 1G RAM Plz help me! Peter

2 1

Re: [Serusers] mysql configuration and serctl
by Andrey Kouprianov 13 Mar '06

13 Mar '06

I am not entirely sure, but I think SER has a problem creating ser_fifo for some reason. Your directory settings are fine too. I think you should not use CVS to install SER. Those sources are most probably under development and are being changed constantly. So, instead, download a stable SER version (I would suggest using 0.9.6, which is the latest) from iptel.org and install it right upon your existing version (read INSTALL file first on how to specify the installation directory). If you have a way to remove previous installation first, that would be even better. Best of luck :) On 3/13/06, İlker Aktuna (Koç. net ) <ilkera(a)koc.net> wrote: > > Hi, > > I downloaded the ser sources with cvs (following command): > cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router > > I am not sure of the version. How can I check that ? > > If I use the "serctl ul show" command , I get this response: > Error opening ser's FIFO /tmp/ser_fifo > Make sure you have line fifo=/tmp/ser_fifo in your config > > My /tmp/ folder permissions: > # ls -adl /tmp/ > drwxrwxrwt 14 root root 4096 Mar 13 09:25 /tmp/ > > In messages file I get these: > Mar 13 08:24:02 asterisk1 /root/ser/sbin/ser[15292]: ERROR: receive_fd: > EOF on 21 > Mar 13 08:24:02 asterisk1 /root/ser/sbin/ser[15292]: ERROR: receive_fd: > EOF on 22 > Mar 13 08:45:46 asterisk1 ser: parse error (12,1-5): syntax error > Mar 13 08:45:46 asterisk1 ser: parse error (12,1-5): > Mar 13 08:53:05 asterisk1 ser: parse error (12,1-5): syntax error > Mar 13 08:53:05 asterisk1 ser: parse error (12,1-5): > Mar 13 08:57:15 asterisk1 ser: parse error (12,1-5): syntax error > > so what should I do ? > > > > ------------------------------ > *From:* Andrey Kouprianov [mailto:andrey.kouprianov@gmail.com] > *Sent:* Monday, March 13, 2006 6:03 PM > > *To:* İlker Aktuna (Koç.net <http://koç.net/>) > *Subject:* Re: [Serusers] mysql configuration and serctl > > > Very strange... I just tested your file with my server (ser1.cfg)... It > works fine and my eyeBeam registers w/o any problem and I can even use > "serctl ul show" command to check for registrations, which are there. > > I have a couple of questions though: > 1. What version of SER are you using? > 2. Are your /tmp directory permissions set right? > 3. What does /var/log/messages show? (you can check with "tail -n 20 > /var/log/messages") > > > > > > On 3/13/06, İlker Aktuna (Koç. net ) <ilkera(a)koc.net> wrote: > > > > Hi, > > > > I've attached 2 config files. > > ser1.cfg does not start ser (gives the parse error) > > ser2.cfg starts ser (only difference is fifo line) > > But after ser starts with ser2.cfg, and try to register a SIP softphone > > (Xten Eyebeam), it doesn't get registered (timeouts) > > When I check the sip packets with tcpdump I see that Ser daemon responds > > to every REGISTER packet that my client sends with "SIP 200 ok" but the > > client doesn't get registered. > > The config file is the standart hello world cfg file from the > > GettingStarted guide. > > So I think it should register all clients, is that wrong ? > > > > Thanks, > > ilker > > > > > > > > ------------------------------ > > *From:* serusers-bounces(a)iptel.org [mailto: serusers-bounces(a)iptel.org] > > *On Behalf Of *Andrey Kouprianov > > *Sent:* Monday, March 13, 2006 4:46 PM > > *To:* serusers(a)iptel.org > > > > *Subject:* Re: [Serusers] mysql configuration and serctl > > > > > > can u also attach you ser.cfg? it's impossible to tell like this. > > > > > > On 3/13/06, İlker Aktuna (Koç. net) <ilkera(a)koc.net > wrote: > > > > > > Thanks. > > > I just tried the gettingstarted config; and I have a problem. > > > > > > I didn't change anything except the IP address in the cfg file. > > > But when starting SER, I receive the following error: > > > > > > # <ot@asterisk1> /root/ser/sbin/ser -c -f /root/ser/etc/ser/ser.cfg > > > 0(28118) parse error (11,1-5): syntax error > > > 0(28118) parse error (11,1-5): > > > ERROR: bad config file (2 errors) > > > > > > If I comment out the line (fifo="/tmp/ser_fifo") in cfg file, SER > > > starts successfully. > > > Why can't it parse that line ? > > > > > > Thanks, > > > ilker > > > > > > ------------------------------ > > > *From:* Andrey Kouprianov [mailto:andrey.kouprianov@gmail.com] > > > *Sent:* Monday, March 13, 2006 3:38 PM > > > > > > *To:* İlker Aktuna (Koç.net <http://koç.net/>) > > > *Subject:* Re: [Serusers] mysql configuration and serctl > > > > > > > > > it might be... anyway im attaching one copy to this email. enjoy :)) > > > > > > On 3/13/06, İlker Aktuna (Koç. net) < ilkera(a)koc.net> wrote: > > > > > > > Is this user manual "not available" from the Iptel.org<http://iptel.org/>site ? > > > Google search produces too many results. > > > > > > > > > -----Original Message----- > > > From: mkumar(a)mantragroup.com [ mailto:mkumar@mantragroup.com<mkumar(a)mantragroup.com> > > > ] > > > Sent: Monday, March 13, 2006 3:23 PM > > > To: İlker Aktuna (Koç.net <http://koç.net/>) > > > Cc: serusers(a)iptel.org > > > Subject: Re: [Serusers] mysql configuration and serctl > > > > > > > > > Try searching for ser user manual on google, it will have all the > > > information. > > > > > > Quoting "?lker Aktuna (Koç.net <http://koç.net/>)" < ilkera(a)koc.net>: > > > > > > > Hi everyone, > > > > > > > > I am trying to use Ser for the first time. I finally compiled it and > > > > it is running with the default configuration. > > > > But I don't know the needed mysql tables/users/databases. Where can > > > I > > > > find this information ? > > > > > > > > In fact, I didn't want to use mysql for first tests but serctl > > > command > > > > requires it. > > > > Is there another way of adding users ? > > > > > > > > Btw, with no user I tried to register a sip softphone. ser responses > > > > > > > with "200 ok" but the phone does not get registered. > > > > What am I doing wrong ? > > > > > > > > Simply, I need basic configuration information to register my first > > > sip user. > > > > > > > > Thanks for your help, > > > > ilker > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0A060704/06024D06/0E004A > > > > > > > 03/18161121.jpg> > > > > > > > ______________________________________________________________________ > > > > > > > ______________________________________________________________________ > > > > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > > > > > > > olabilir. > > > > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic > > > bir > > > > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen > > > > > > > e-posta mesajini kullaniciya hemen geri gonderiniz ve tum > > > > kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir > > > > sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > > > > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > > > > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > > > > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > > > > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > > > > dogacak hicbir sorumlulugu kabul etmez. > > > > This message is intended solely for the use of the individual or > > > > entity to whom it is addressed , and may contain confidential > > > > information. If you are not the intended recipient of this message > > > or > > > > you receive this mail in error, you should refrain from making any > > > use > > > > of the contents and from opening any attachment. In that case, > > > please > > > > notify the sender immediately and return the message to the sender, > > > > then, delete and destroy all copies. This e-mail message, can not be > > > > copied, published or sold for any reason. This e-mail message has > > > been > > > > swept by anti-virus systems for the presence of computer viruses. In > > > > > > > doing so, however, sender cannot warrant that virus or other forms > > > > of data corruption may not be present and do not take any > > > > responsibility in any occurrence. > > > > > > > ______________________________________________________________________ > > > > > > > ______________________________________________________________________ > > > > _ > > > > > > > > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0706040C/05014906/0303490B/151…> > > > > > > _____________________________________________________________________________________________________________________________________________ > > > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. > > > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > > > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > > > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > > > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > > > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > > > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > > > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > > > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > > > zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or > > > entity to whom it is addressed , and may contain confidential information. > > > If you are not the intended recipient of this message or you receive this > > > mail in error, you should refrain from making any use of the contents and > > > from opening any attachment. In that case, please notify the sender > > > immediately and return the message to the sender, then, delete and destroy > > > all copies. This e-mail message, can not be copied, published or sold for > > > any reason. This e-mail message has been swept by anti-virus systems for the > > > presence of computer viruses. In doing so, however, sender cannot warrant > > > that virus or other forms of data corruption may not be present and do not > > > take any responsibility in any occurrence. > > > > > > _____________________________________________________________________________________________________________________________________________ > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)iptel.org > > > http://mail.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0B050504/01014D07/0F014803/092…> > > > > > > _____________________________________________________________________________________________________________________________________________ > > > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. > > > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > > > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > > > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > > > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > > > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > > > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > > > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > > > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > > > zararlardan dogacak hicbir sorumlulugu kabul etmez. > > > This message is intended solely for the use of the individual or > > > entity to whom it is addressed , and may contain confidential information. > > > If you are not the intended recipient of this message or you receive this > > > mail in error, you should refrain from making any use of the contents and > > > from opening any attachment. In that case, please notify the sender > > > immediately and return the message to the sender, then, delete and destroy > > > all copies. This e-mail message, can not be copied, published or sold for > > > any reason. This e-mail message has been swept by anti-virus systems for the > > > presence of computer viruses. In doing so, however, sender cannot warrant > > > that virus or other forms of data corruption may not be present and do not > > > take any responsibility in any occurrence. > > > > > > _____________________________________________________________________________________________________________________________________________ > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)iptel.org > > > http://mail.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0705050C/06084D06/0304480B/152…> > > > > _____________________________________________________________________________________________________________________________________________ > > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. > > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > > zararlardan dogacak hicbir sorumlulugu kabul etmez. > > This message is intended solely for the use of the individual or entity > > to whom it is addressed , and may contain confidential information. If you > > are not the intended recipient of this message or you receive this mail in > > error, you should refrain from making any use of the contents and from > > opening any attachment. In that case, please notify the sender immediately > > and return the message to the sender, then, delete and destroy all copies. > > This e-mail message, can not be copied, published or sold for any reason. > > This e-mail message has been swept by anti-virus systems for the presence of > > computer viruses. In doing so, however, sender cannot warrant that virus > > or other forms of data corruption may not be present and do not take any > > responsibility in any occurrence. > > > > _____________________________________________________________________________________________________________________________________________ > > > > > > > > <http://271570.sigclick.mailinfo.com/sigclick/0002070D/03014A05/040D4A0A/225…> > > _____________________________________________________________________________________________________________________________________________ > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta > mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj > kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac > icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta > mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak > yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol > ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek > zararlardan dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or entity to > whom it is addressed , and may contain confidential information. If you are > not the intended recipient of this message or you receive this mail in > error, you should refrain from making any use of the contents and from > opening any attachment. In that case, please notify the sender immediately > and return the message to the sender, then, delete and destroy all copies. > This e-mail message, can not be copied, published or sold for any reason. > This e-mail message has been swept by anti-virus systems for the presence of > computer viruses. In doing so, however, sender cannot warrant that virus > or other forms of data corruption may not be present and do not take any > responsibility in any occurrence. > > _____________________________________________________________________________________________________________________________________________ >

1 1

[Serusers] SERWeb
by Tyler Farmer 13 Mar '06

13 Mar '06

I am getting same Function aggregate_methods() doesn't exists error message and have followed the steps to install the classkit. I also double-checked that the extension=classkit.so entry is in the php.ini. I am still getting the error. When I try to access SERWeb through IE I get the following error in the Apache error log: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 I'm confused as to where the error is actually occurring (line 0 where?). Has anybody ran into this problem? Thanks, Tyler Farmer

1 0

RE: [Users] Domain: is_from_local() is case sensitive in caching mode.
by Papadopoulos Georgios 13 Mar '06

13 Mar '06

You are right. I got confused... thanks again George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Monday, March 13, 2006 4:43 PM > To: Juha Heinanen > Cc: Papadopoulos Georgios; daniel(a)voice-system.ro; users(a)openser.org > Subject: Re: [Users] Domain: is_from_local() is case > sensitive in caching mode. > > still is not clear for me what will be the advantage of > keeping the domain names into the cache in a specific format? > what is here important is how they are compared... > > regards, > bogdan > > Juha Heinanen wrote: > > >Papadopoulos Georgios writes: > > > > > I tried it and it works fine. It is also important that when the > > > table is cached into memory that it is done in lowercase. > I searched > > > briefly but could not locate the code where this is done > (maybe in > > > the DB module?). > > > >it is done by hash.c/hash_table_install function. you could add > >statement > > > > for (i = 0; i < np->domain.len; i++) domain[i] = > tolower(domain[i]); > > > >before > > > > (void) strncpy(np->domain.s, domain, np->domain.len); > > > >-- juha > > > > > > Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

1 0

RE: [Users] Domain: is_from_local() is case sensitive in caching mode.
by Papadopoulos Georgios 13 Mar '06

13 Mar '06

Hi Bogdan, I tried it and it works fine. It is also important that when the table is cached into memory that it is done in lowercase. I searched briefly but could not locate the code where this is done (maybe in the DB module?). I tried puting a domain in uppercase letters into MySQL while having the >From header in lowercase. This worked also. thank you George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Monday, March 13, 2006 2:33 PM > To: Papadopoulos Georgios > Cc: daniel(a)voice-system.ro; users(a)openser.org; Juha Heinanen > Subject: Re: [Users] Domain: is_from_local() is case > sensitive in caching mode. > > Hi George, > > right indeed - I fixed this problem on CVS. please update and > give it a try id everything ok. > > the PDT (Prefix-to-Domain Translation) module was affected by > this problem. > > thanks for report, > bogdan > > > Papadopoulos Georgios wrote: > > >Hello, > > > >I have been looking into the code. strncasecmp does case insensitive > >comparison, so this part is correct. > >My guess is that the hash function should use the lowercase domain. > > > >In my case I have in the domain table "i-call.gr" and > "sip.i-call.gr". > >If the From header is ....(a)i-Call.gr then is_from_local() > returns false > >(in caching mode). > > > >I hope this helps > > > >George > > > > > > > >>-----Original Message----- > >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >>Sent: Monday, March 13, 2006 11:32 AM > >>To: Papadopoulos Georgios > >>Cc: daniel(a)voice-system.ro; users(a)openser.org; Juha Heinanen > >>Subject: Re: [Users] Domain: is_from_local() is case sensitive in > >>caching mode. > >> > >>Hi Georgios, > >> > >>indeed, the search through the cache is done case sensitive via > >>strncasesmp(). > >> > >>Juha, souldn't the domain matching be case insensitive? > >> > >>regards, > >>bogdan > >> > >> > >>Georgios Papadopoulos wrote: > >> > >> > >> > >>>I am pretty sure (I am using OpenSER 1.0.0). > >>>What about the part where the table is cached into memory? > Do you do > >>>select lower(domain) from domain? I tried briefly to find > >>> > >>> > >>the relevant > >> > >> > >>>piece of code but I couldn't. > >>> > >>>George > >>> > >>> > >>> > >>> > >>> > >>> > >>>>-----Original Message----- > >>>>From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > >>>>Sent: Saturday, March 11, 2006 3:50 PM > >>>>To: Papadopoulos Georgios > >>>>Cc: users(a)openser.org > >>>>Subject: Re: [Users] Domain: is_from_local() is case sensitive in > >>>>caching mode. > >>>> > >>>>Hello, > >>>> > >>>>On 03/10/06 17:51, Papadopoulos Georgios wrote: > >>>> > >>>> > >>>> > >>>> > >>>>>Hello, > >>>>> > >>>>>I have noticed that is_from_local in the Domain module is > >>>>>case-sensitive if the module is in caching mode. In > >>>>> > >>>>> > >>>>> > >>>>> > >>>>non-caching mode > >>>> > >>>> > >>>> > >>>> > >>>>>it is case insensitive. > >>>>>Could this be fixed in the future? > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>are you sure? I was looking in the sources and the comparison is > >>>>case-insensitive. > >>>> > >>>>Cheers, > >>>>Daniel > >>>> > >>>> > >>>> > >>>> > >>>> > >>>>>thank you > >>>>> > >>>>>George > >>>>> > >>>>>Disclaimer > >>>>>The information in this e-mail and any attachments is > >>>>> > >>>>> > >>>>> > >>>>> > >>>>confidential. It is intended solely for the attention and > >>>> > >>>> > >>use of the > >> > >> > >>>>named addressee(s). If you are not the intended recipient, > >>>> > >>>> > >>or person > >> > >> > >>>>responsible for delivering this information to the intended > >>>> > >>>> > >>recipient, > >> > >> > >>>>please notify the sender immediately. Unless you are the intended > >>>>recipient or his/her representative you are not > authorized to, and > >>>>must not, read, copy, distribute, use or retain this > message or any > >>>>part of it. E-mail transmission cannot be guaranteed to be > >>>> > >>>> > >>secure or > >> > >> > >>>>error-free as information could be intercepted, corrupted, lost, > >>>>destroyed, arrive late or incomplete, or contain viruses. > >>>> > >>>> > >>>> > >>>> > >>>>>_______________________________________________ > >>>>>Users mailing list > >>>>>Users(a)openser.org > >>>>>http://openser.org/cgi-bin/mailman/listinfo/users > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>> > >>>_______________________________________________ > >>>Users mailing list > >>>Users(a)openser.org > >>>http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >>> > >>> > >>> > >> > >> > > > >Disclaimer > >The information in this e-mail and any attachments is > confidential. It is intended solely for the attention and use > of the named addressee(s). If you are not the intended > recipient, or person responsible for delivering this > information to the intended recipient, please notify the > sender immediately. Unless you are the intended recipient or > his/her representative you are not authorized to, and must > not, read, copy, distribute, use or retain this message or > any part of it. E-mail transmission cannot be guaranteed to > be secure or error-free as information could be intercepted, > corrupted, lost, destroyed, arrive late or incomplete, or > contain viruses. > > > > > > > > > >

3 3

RE: [Serusers] mysql configuration and serctl
by İlker Aktuna (Koç.net) 13 Mar '06

13 Mar '06

Hi, I've attached 2 config files. ser1.cfg does not start ser (gives the parse error) ser2.cfg starts ser (only difference is fifo line) But after ser starts with ser2.cfg, and try to register a SIP softphone (Xten Eyebeam), it doesn't get registered (timeouts) When I check the sip packets with tcpdump I see that Ser daemon responds to every REGISTER packet that my client sends with "SIP 200 ok" but the client doesn't get registered. The config file is the standart hello world cfg file from the GettingStarted guide. So I think it should register all clients, is that wrong ? Thanks, ilker ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: Monday, March 13, 2006 4:46 PM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] mysql configuration and serctl can u also attach you ser.cfg? it's impossible to tell like this. On 3/13/06, İlker Aktuna (Koç. net) <ilkera(a)koc.net> wrote: Thanks. I just tried the gettingstarted config; and I have a problem. I didn't change anything except the IP address in the cfg file. But when starting SER, I receive the following error: # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f /root/ser/etc/ser/ser.cfg 0(28118) parse error (11,1-5): syntax error 0(28118) parse error (11,1-5): ERROR: bad config file (2 errors) If I comment out the line (fifo="/tmp/ser_fifo") in cfg file, SER starts successfully. Why can't it parse that line ? Thanks, ilker ________________________________ From: Andrey Kouprianov [mailto:andrey.kouprianov@gmail.com] Sent: Monday, March 13, 2006 3:38 PM To: İlker Aktuna (Koç.net <http://koç.net/> ) Subject: Re: [Serusers] mysql configuration and serctl it might be... anyway im attaching one copy to this email. enjoy :)) On 3/13/06, İlker Aktuna (Koç. net) < ilkera(a)koc.net <mailto:ilkera@koc.net> > wrote: Is this user manual "not available" from the Iptel.org <http://iptel.org/> site ? Google search produces too many results. -----Original Message----- From: mkumar(a)mantragroup.com [ mailto:mkumar@mantragroup.com <mailto:mkumar@mantragroup.com> ] Sent: Monday, March 13, 2006 3:23 PM To: İlker Aktuna (Koç.net <http://koç.net/> ) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] mysql configuration and serctl Try searching for ser user manual on google, it will have all the information. Quoting "?lker Aktuna (Koç.net <http://koç.net/> )" < ilkera(a)koc.net <mailto:ilkera@koc.net> >: > Hi everyone, > > I am trying to use Ser for the first time. I finally compiled it and > it is running with the default configuration. > But I don't know the needed mysql tables/users/databases. Where can I > find this information ? > > In fact, I didn't want to use mysql for first tests but serctl command > requires it. > Is there another way of adding users ? > > Btw, with no user I tried to register a sip softphone. ser responses > with "200 ok" but the phone does not get registered. > What am I doing wrong ? > > Simply, I need basic configuration information to register my first sip user. > > Thanks for your help, > ilker > > > <http://271570.sigclick.mailinfo.com/sigclick/0A060704/06024D06/0E004A > 03/18161121.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen > e-posta mesajini kullaniciya hemen geri gonderiniz ve tum > kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir > sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or > entity to whom it is addressed , and may contain confidential > information. If you are not the intended recipient of this message or > you receive this mail in error, you should refrain from making any use > of the contents and from opening any attachment. In that case, please > notify the sender immediately and return the message to the sender, > then, delete and destroy all copies. This e-mail message, can not be > copied, published or sold for any reason. This e-mail message has been > swept by anti-virus systems for the presence of computer viruses. In > doing so, however, sender cannot warrant that virus or other forms > of data corruption may not be present and do not take any > responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > <http://271570.sigclick.mailinfo.com/sigclick/0706040C/05014906/0303490B/151…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://271570.sigclick.mailinfo.com/sigclick/0B050504/01014D07/0F014803/092…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://271570.sigclick.mailinfo.com/sigclick/0705050C/06084D06/0304480B/152…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

RE: [Serusers] mysql configuration and serctl
by İlker Aktuna (Koç.net) 13 Mar '06

13 Mar '06

Thanks. I just tried the gettingstarted config; and I have a problem. I didn't change anything except the IP address in the cfg file. But when starting SER, I receive the following error: # <mailto:ot@asterisk1> /root/ser/sbin/ser -c -f /root/ser/etc/ser/ser.cfg 0(28118) parse error (11,1-5): syntax error 0(28118) parse error (11,1-5): ERROR: bad config file (2 errors) If I comment out the line (fifo="/tmp/ser_fifo") in cfg file, SER starts successfully. Why can't it parse that line ? Thanks, ilker ________________________________ From: Andrey Kouprianov [mailto:andrey.kouprianov@gmail.com] Sent: Monday, March 13, 2006 3:38 PM To: İlker Aktuna (Koç.net) Subject: Re: [Serusers] mysql configuration and serctl it might be... anyway im attaching one copy to this email. enjoy :)) On 3/13/06, İlker Aktuna (Koç. net) <ilkera(a)koc.net> wrote: Is this user manual "not available" from the Iptel.org <http://iptel.org/> site ? Google search produces too many results. -----Original Message----- From: mkumar(a)mantragroup.com [ mailto:mkumar@mantragroup.com <mailto:mkumar@mantragroup.com> ] Sent: Monday, March 13, 2006 3:23 PM To: İlker Aktuna (Koç.net <http://koç.net/> ) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] mysql configuration and serctl Try searching for ser user manual on google, it will have all the information. Quoting "?lker Aktuna (Koç.net <http://koç.net/> )" < ilkera(a)koc.net <mailto:ilkera@koc.net> >: > Hi everyone, > > I am trying to use Ser for the first time. I finally compiled it and > it is running with the default configuration. > But I don't know the needed mysql tables/users/databases. Where can I > find this information ? > > In fact, I didn't want to use mysql for first tests but serctl command > requires it. > Is there another way of adding users ? > > Btw, with no user I tried to register a sip softphone. ser responses > with "200 ok" but the phone does not get registered. > What am I doing wrong ? > > Simply, I need basic configuration information to register my first sip user. > > Thanks for your help, > ilker > > > <http://271570.sigclick.mailinfo.com/sigclick/0A060704/06024D06/0E004A > 03/18161121.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen > e-posta mesajini kullaniciya hemen geri gonderiniz ve tum > kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir > sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or > entity to whom it is addressed , and may contain confidential > information. If you are not the intended recipient of this message or > you receive this mail in error, you should refrain from making any use > of the contents and from opening any attachment. In that case, please > notify the sender immediately and return the message to the sender, > then, delete and destroy all copies. This e-mail message, can not be > copied, published or sold for any reason. This e-mail message has been > swept by anti-virus systems for the presence of computer viruses. In > doing so, however, sender cannot warrant that virus or other forms > of data corruption may not be present and do not take any > responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > <http://271570.sigclick.mailinfo.com/sigclick/0706040C/05014906/0303490B/151…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://271570.sigclick.mailinfo.com/sigclick/0B050504/01014D07/0F014803/092…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] AVP value to exec_dset
by Marcello Lupo 13 Mar '06

13 Mar '06

Hi, How to pass an avp value to the exec_dset function?? I already tried with (one or the other): append_hf("Headertest: $avp(i:2)\r\n"); avp_pushto("$Headertest","i:2"); And after to use exec_dset with: exec_dset("/usr/sbin/somescript.sh '$SIP_HF_HEADERTEST'") But no one of the above have accomplished to pass the value to exec_dmesg. Have you any suggestion?? Even to pass the value without passing through the header field that is not usefull for me, but directly form AVP to exec_msg? I'm using openser 1.0.0 cvs of 31/1/2006 Thanks, Bye, Marcello

2 1

RE: [Serusers] mysql configuration and serctl
by İlker Aktuna (Koç.net) 13 Mar '06

13 Mar '06

Is this user manual "not available" from the Iptel.org site ? Google search produces too many results. -----Original Message----- From: mkumar(a)mantragroup.com [mailto:mkumar@mantragroup.com] Sent: Monday, March 13, 2006 3:23 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] mysql configuration and serctl Try searching for ser user manual on google, it will have all the information. Quoting "?lker Aktuna (Koç.net)" <ilkera(a)koc.net>: > Hi everyone, > > I am trying to use Ser for the first time. I finally compiled it and > it is running with the default configuration. > But I don't know the needed mysql tables/users/databases. Where can I > find this information ? > > In fact, I didn't want to use mysql for first tests but serctl command > requires it. > Is there another way of adding users ? > > Btw, with no user I tried to register a sip softphone. ser responses > with "200 ok" but the phone does not get registered. > What am I doing wrong ? > > Simply, I need basic configuration information to register my first sip user. > > Thanks for your help, > ilker > > > <http://271570.sigclick.mailinfo.com/sigclick/0A060704/06024D06/0E004A > 03/18161121.jpg> > ______________________________________________________________________ > ______________________________________________________________________ > _ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor > olabilir. > Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir > sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen > e-posta mesajini kullaniciya hemen geri gonderiniz ve tum > kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir > sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para > karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus > sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta > mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - > virus icermedigini garanti etmez ve meydana gelebilecek zararlardan > dogacak hicbir sorumlulugu kabul etmez. > This message is intended solely for the use of the individual or > entity to whom it is addressed , and may contain confidential > information. If you are not the intended recipient of this message or > you receive this mail in error, you should refrain from making any use > of the contents and from opening any attachment. In that case, please > notify the sender immediately and return the message to the sender, > then, delete and destroy all copies. This e-mail message, can not be > copied, published or sold for any reason. This e-mail message has been > swept by anti-virus systems for the presence of computer viruses. In > doing so, however, sender cannot warrant that virus or other forms > of data corruption may not be present and do not take any > responsibility in any occurrence. > ______________________________________________________________________ > ______________________________________________________________________ > _ > <http://271570.sigclick.mailinfo.com/sigclick/0706040C/05014906/0303490B/151…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] mysql configuration and serctl
by İlker Aktuna (Koç.net) 13 Mar '06

13 Mar '06

Hi everyone, I am trying to use Ser for the first time. I finally compiled it and it is running with the default configuration. But I don't know the needed mysql tables/users/databases. Where can I find this information ? In fact, I didn't want to use mysql for first tests but serctl command requires it. Is there another way of adding users ? Btw, with no user I tried to register a sip softphone. ser responses with "200 ok" but the phone does not get registered. What am I doing wrong ? Simply, I need basic configuration information to register my first sip user. Thanks for your help, ilker <http://271570.sigclick.mailinfo.com/sigclick/0A060704/06024D06/0E004A03/181…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

3 2

RE: [Users] Domain: is_from_local() is case sensitive in caching mode.
by Papadopoulos Georgios 13 Mar '06

13 Mar '06

Hello, I have been looking into the code. strncasecmp does case insensitive comparison, so this part is correct. My guess is that the hash function should use the lowercase domain. In my case I have in the domain table "i-call.gr" and "sip.i-call.gr". If the From header is ....(a)i-Call.gr then is_from_local() returns false (in caching mode). I hope this helps George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Monday, March 13, 2006 11:32 AM > To: Papadopoulos Georgios > Cc: daniel(a)voice-system.ro; users(a)openser.org; Juha Heinanen > Subject: Re: [Users] Domain: is_from_local() is case > sensitive in caching mode. > > Hi Georgios, > > indeed, the search through the cache is done case sensitive > via strncasesmp(). > > Juha, souldn't the domain matching be case insensitive? > > regards, > bogdan > > > Georgios Papadopoulos wrote: > > >I am pretty sure (I am using OpenSER 1.0.0). > >What about the part where the table is cached into memory? Do you do > >select lower(domain) from domain? I tried briefly to find > the relevant > >piece of code but I couldn't. > > > >George > > > > > > > > > >>-----Original Message----- > >>From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > >>Sent: Saturday, March 11, 2006 3:50 PM > >>To: Papadopoulos Georgios > >>Cc: users(a)openser.org > >>Subject: Re: [Users] Domain: is_from_local() is case sensitive in > >>caching mode. > >> > >>Hello, > >> > >>On 03/10/06 17:51, Papadopoulos Georgios wrote: > >> > >> > >>>Hello, > >>> > >>>I have noticed that is_from_local in the Domain module is > >>>case-sensitive if the module is in caching mode. In > >>> > >>> > >>non-caching mode > >> > >> > >>>it is case insensitive. > >>>Could this be fixed in the future? > >>> > >>> > >>> > >>are you sure? I was looking in the sources and the comparison is > >>case-insensitive. > >> > >>Cheers, > >>Daniel > >> > >> > >> > >>>thank you > >>> > >>>George > >>> > >>>Disclaimer > >>>The information in this e-mail and any attachments is > >>> > >>> > >>confidential. It is intended solely for the attention and > use of the > >>named addressee(s). If you are not the intended recipient, > or person > >>responsible for delivering this information to the intended > recipient, > >>please notify the sender immediately. Unless you are the intended > >>recipient or his/her representative you are not authorized to, and > >>must not, read, copy, distribute, use or retain this message or any > >>part of it. E-mail transmission cannot be guaranteed to be > secure or > >>error-free as information could be intercepted, corrupted, lost, > >>destroyed, arrive late or incomplete, or contain viruses. > >> > >> > >>> > >>>_______________________________________________ > >>>Users mailing list > >>>Users(a)openser.org > >>>http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >>> > >>> > > > > > > > >_______________________________________________ > >Users mailing list > >Users(a)openser.org > >http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

4 3

Re: [Users] Domain: is_from_local() is case sensitive in caching mode.
by Bogdan-Andrei Iancu 13 Mar '06

13 Mar '06

Hi Georgios, indeed, the search through the cache is done case sensitive via strncasesmp(). Juha, souldn't the domain matching be case insensitive? regards, bogdan Georgios Papadopoulos wrote: >I am pretty sure (I am using OpenSER 1.0.0). >What about the part where the table is cached into memory? Do you do >select lower(domain) from domain? I tried briefly to find the relevant piece >of code but I couldn't. > >George > > > > >>-----Original Message----- >>From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] >>Sent: Saturday, March 11, 2006 3:50 PM >>To: Papadopoulos Georgios >>Cc: users(a)openser.org >>Subject: Re: [Users] Domain: is_from_local() is case >>sensitive in caching mode. >> >>Hello, >> >>On 03/10/06 17:51, Papadopoulos Georgios wrote: >> >> >>>Hello, >>> >>>I have noticed that is_from_local in the Domain module is >>>case-sensitive if the module is in caching mode. In >>> >>> >>non-caching mode >> >> >>>it is case insensitive. >>>Could this be fixed in the future? >>> >>> >>> >>are you sure? I was looking in the sources and the comparison >>is case-insensitive. >> >>Cheers, >>Daniel >> >> >> >>>thank you >>> >>>George >>> >>>Disclaimer >>>The information in this e-mail and any attachments is >>> >>> >>confidential. It is intended solely for the attention and use >>of the named addressee(s). If you are not the intended >>recipient, or person responsible for delivering this >>information to the intended recipient, please notify the >>sender immediately. Unless you are the intended recipient or >>his/her representative you are not authorized to, and must >>not, read, copy, distribute, use or retain this message or >>any part of it. E-mail transmission cannot be guaranteed to >>be secure or error-free as information could be intercepted, >>corrupted, lost, destroyed, arrive late or incomplete, or >>contain viruses. >> >> >>> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>> >>> > > > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > >

2 2

[Users] OSP and buffer size
by Helge Waastad 13 Mar '06

13 Mar '06

Hi, and a good evening to you all. I'm having a beer (or two) and found out that I oughta try something "new" :-) I've started (I've done it successfully before, but then in a standalone server scenario) to implement the OSP module for peering. However, I see in my logs, that OpenSER is complaining about buffer sizes...... What I'm worried about is the ERROR message beneath. I'm afraid that this is messing up my routing. Any comments? ---- osp: there is 1 osp routes, call-id '692039019(a)10.0.0.18', transaction-id '1142102578275' Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: xl_printf: no more space for text [1950183213] Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: xl_printf: buffer overflow -- increase the buffer size... Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: ERROR:rr:w_add_rr_param: failed to print the format ----

2 1

[Users] MiniSIP on Windows XP
by Cesc 13 Mar '06

13 Mar '06

Hi, The MiniSIP project team is proud to announce that: * MiniSIP for Windows XP (2K ... not tested) can be downloaded from the webpage. * MiniSIP for Pocket PC is on the way ... we'll keep you posted. * The project's webpage has been updated. Check it out at: http://www.minisip.org/ The MiniSIP Team

3 3

[Serusers] Can't get SERWEB to work
by George Lambson 13 Mar '06

13 Mar '06

Hi all, Having this error come up after following all of the instructions and troubleshooting. Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit I am running FC4 with php, php-mysql, php-devel, php-pear, and mysql all installed with yum from the default repositories. I went ahead and put the serweb folder in my /var/www/html directory to see if I could get it working with the intent of moving it and setting up an alias later. Here are some snippets of my many different configuration files. _php.ini:_ extension_dir = "/usr/lib/php/modules" extension=classkit.so -- also the mysql.so files are loaded from the /etc/php directory _config_data_layer.php_ $config->data_sql->type="mysql"; //type of db host, enter "mysql" for MySQL or "pgsql" for PostgreSQL $i=0; $config->data_sql->host[$i]['host']="localhost"; //database host $config->data_sql->host[$i]['port']=""; //database port - leave empty for default $config->data_sql->host[$i]['name']="ser"; //database name $config->data_sql->host[$i]['user']="ser"; //database conection user $config->data_sql->host[$i]['pass']="******"; //database conection password _config_paths.ini_ $config->root_path="/serweb/html/"; /* roo uri of your server */ if (isset($_SERVER['rcsip.myservername.ext'])) $config->root_uri="http://".$_SERVER['rcsip.myservername.ext']; else $config->root_uri=""; _php.conf_ LoadModule php5_module modules/libphp5.so AddHandler php5-script .php .phtml AddType text/html .php .phtml DirectoryIndex index.php _ser.cfg_ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ #alias=tcp:myip:5060 #alias=udp:myip:5060 #check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/exec.so" # ----------------- setting module-specific parameters --------------- modparam("auth_db|domain|uri_db|usrloc", "db_url", "mysql://ser:******@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 0) modparam("nathelper", "natping_interval", 30) modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1)

4 6

Re: [Serusers] LCR module
by Ryan Pagquil 13 Mar '06

13 Mar '06

Hi, Could you provide me a sample or any link that points to a detailed howto. Thanks, Ryan At 04:32 AM 3/13/2006, Voipers Portugal wrote: >Yes, that is possible. That´s what LRC is used for. > >Jose Simoes > > >On 3/11/06, Ryan Pagquil ><<mailto:rpagquil@philonline.com>rpagquil(a)philonline.com> wrote: >Hi, > I want to use the LCR module of SER, but it is not included on the >latest release of SER ( 0.9.6). Also is it possible to use this module >to route especial calls to a certain gateway based on the country >code of the destination? For example all calls to the Philippines are >bound to a specific gateway and the decision >will be based on the destination: > >destination is: 00632xxxxxxx ; i strip the leading 00 and to >determine that it is a PSTN call >then i want this call to be forwarded to a specific gateway. Can I do >this with LCR module? How? Sample please... > >Thanks in advance, >Ryan > >_______________________________________________ >Serusers mailing list ><mailto:serusers@lists.iptel.org>serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: [Users] OSP and buffer size
by Dmitry Isakbayev 12 Mar '06

12 Mar '06

Hi Helge, I will take a look at the error. Are you using the latest code for OpenSER and the module or a particular version? Thanks, Dmitry > Date: Sat, 11 Mar 2006 21:09:38 +0100 > From: Helge Waastad <helge(a)smartnet.no> > Subject: [Users] OSP and buffer size > To: users(a)openser.org > Message-ID: <1142107778.21478.10.camel(a)localhost.localdomain> > Content-Type: text/plain > > Hi, and a good evening to you all. > I'm having a beer (or two) and found out that I oughta try something > "new" :-) > > I've started (I've done it successfully before, but then in a standalone > server scenario) to implement the OSP module for peering. > However, I see in my logs, that OpenSER is complaining about buffer > sizes...... > What I'm worried about is the ERROR message beneath. I'm afraid that > this is messing up my routing. > > Any comments? > ---- > > osp: there is 1 osp routes, call-id '692039019(a)10.0.0.18', > transaction-id '1142102578275' > Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: xl_printf: no more > space for text [1950183213] > Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: xl_printf: buffer > overflow -- increase the buffer size... > Mar 11 19:42:58 proxy-02 /usr/sbin/openser[21464]: > ERROR:rr:w_add_rr_param: failed to print the format

2 1

[Users] Re: web administration tool
by Helge Waastad 12 Mar '06

12 Mar '06

Hi, U can use Serweb with OpenSER aswell. You just need to modify fifo references default db user/passwd and a couple of tablenames.(If I do not mistaken) br hw --- Hello to all I just wanted to know if exists a web interface like serweb, but for OpenSER. Thanks Joao Pereira

2 1

[Users] Radius Authentication
by Edson 12 Mar '06

12 Mar '06

Hi, Guys... As the MySQL problem is aparently solved I’m facing a Radius issue… I'm using FreeRadius 1.0.4, RadiusCliente-NG 0.5.2 and OpenSER 1.0.1. If I duplicate the configs used with SER (and that it works fine) I’m unable to authenticate my UA (the same that authenticate with SER). The message with “debug=4” is: Mar 1 15:41:43 dell openser-TEST[20789]: check_nonce(): comparing [4405ec129258d5cf9c016ade69cf37e33b5af52b] and [4405ec129258d5cf9c016ade69cf37e33b5af52b] Mar 1 15:41:43 dell openser-TEST[20789]: rc_check_reply: received invalid reply digest from RADIUS server Mar 1 15:41:43 dell openser-TEST[20789]: ERROR:auth_radius:radius_authorize_sterman: rc_auth failed So I supposed that there were some failed configuration, I looked at my “radiusd.conf” and finded: modules { ... digest { } ... } authorize { preprocess auth_log suffix digest sql } authenticate { digest } As my FreeRadius back-end is a MySQL database, the 'sql' statement in authorize seems ok. And so do 'digest' in 'autheticate' section. The question remains: Why are OpenSER complain on Radius response? Maybe it's because of the sterman schema (?).... Anyway, I try to test the server using the radtest tool. The output seems good to me: # radtest 8201(a)DOMAIN.VALID 8201 127.0.0.1 12345 MyServerPassword Sending Access-Request of id 255 to 127.0.0.1:1812 User-Name = "8201(a)DOMAIN.VALID" User-Password = "8201" NAS-IP-Address = sip NAS-Port = 12345 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=255, length=35 Reply-Message = "Authenticated" So I discard FreeRadius config. Is this related on the value of “Reply-Message”? I already read all Radius material that I found on OpenSER web-page… What am I doing wrong? What am I missing? As this same configs work with SER 0.9.2, why did it not with OpenSER 1.0.x? Edson.

3 9

RE: [Serusers] Authentication Based On IP Addresses
by Gokhan Uslu 12 Mar '06

12 Mar '06

Hi Kapil, Thanks for your reply, I am using freeradius and I want to authenticate users with freeradius based on the ip of user. -----Original Message----- From: Kapil Dhawan [mailto:sersavvy@hotmail.com] Sent: 12 Mart 2006 Pazar 07:42 To: Gokhan Uslu Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] Authentication Based On IP Addresses in ser.cfg if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if(method=="INVITE"){ if (src_ip==x1.y1.z1.w1){ if (uri=~"^sip:001*@*"){ rewritehost("x.y.z.w"); t_relay_to_udp("x.y.z.w","5060"); break; }; }; }; This states that if Call is coming from x1.y1.z1.w1 and 00 as prefix then forward it to your Provider. >From: Gokhan Uslu <g.uslu(a)teles.com> >To: "'serusers(a)lists.iptel.org'" <serusers(a)lists.iptel.org> >Subject: [Serusers] Authentication Based On IP Addresses >Date: Sat, 11 Mar 2006 18:58:24 +0100 > > >Hi All... >I am using SER and FREERADIUS >I want to authenticate all the clients based on IP addresses. How to >proceed...? where to make the changes? can any one give me the sample >code function?...Thanks for any hint... > >Gokhan USLU > > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ NRIs: Still paying for money transfers? Now send Money2India for FREE! http://ads.mediaturf.net/event.ng/Type=click&FlightID=20273&AdID=65990&Targe tID=11172&Targets=11172&Values=202,414,1093,1264,3122&Redirect=http:%2F%2Fww w.icicinri.net%2Fmoney2india%2F%3Fm2i%3DBAC-MSN%26att%3DMSNTLM2I70CHAR%26rfr %3DMSNTLM2I70CHAR

1 0

[Serusers] Authentication Based On IP Addresses
by Gokhan Uslu 12 Mar '06

12 Mar '06

Hi All... I am using SER and FREERADIUS I want to authenticate all the clients based on IP addresses. How to proceed...? where to make the changes? can any one give me the sample code function?...Thanks for any hint... Gokhan USLU

2 1

[Serusers] Uninstall SER?
by KaiFu Chan 12 Mar '06

12 Mar '06

Hi all: Do I need to uninstall SER if I want to update SER v0.9.4 to SER v0.9.6? How can I uninstall SER? The command "make uninstall" do not work. Thanks! Sincerely Caxton

3 2

[Users] Install/Setup
by Mark Halverson 12 Mar '06

12 Mar '06

Sorry in advance if posting to the wrong list. Looking to hire someone to install and setup OpenSER and web interface on Fedora Core 4 - 64bit box. Please respond off list of call. -Mark Halverson 530-227-3138 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006

1 0

[Users] Domain: is_from_local() is case sensitive in caching mode.
by Papadopoulos Georgios 11 Mar '06

11 Mar '06

Hello, I have noticed that is_from_local in the Domain module is case-sensitive if the module is in caching mode. In non-caching mode it is case insensitive. Could this be fixed in the future? thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

3 2

[Serusers] backup mysql server
by Rosario Pingaro 11 Mar '06

11 Mar '06

is it possible to configure a second mysql server for backup? if yes how? Thanks Rosario

2 1

[Serusers] presence problem
by queyeah＠adinet.com.uy 11 Mar '06

11 Mar '06

I read the SER presence handbook as you told me, I follow the instructions to install ser with presence modules but i receive some erros and modules wasn't installed. I go back to my old ser installation with pa module, configure some lines in ser.gfc to handle subscribe but now I'm receiving an error to SUSCRIBE and PUBLISH, it's like pa module can't process messages: Status: 400 Bad Request (ethereal) this is my ser.cfg: # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" #esta linea la agrego para cargar el modulo de presencia. loadmodule "/usr/lib/ser/modules/pa.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser" ) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- pa params -- modparam("pa","default_expires", 3600) modparam("pa","use_db",1) modparam("pa","db_url","mysql://ser:heslo@localhost/ser") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("p2t.com", "subscriber")) { www_challenge("p2t.com", "0"); break; }; save("location"); break; }; if (method=="SUBSCRIBE" || method=="PUBLISH") { if (t_newtran()) { handle_subscription("registrar"); break; }; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } Do you have any idea of what's happening??? Thanks again... Gustavo.

2 1

[Users] web administration tool
by Joao Pereira 11 Mar '06

11 Mar '06

Hello to all I just wanted to know if exists a web interface like serweb, but for OpenSER. Thanks Joao Pereira

1 0

[Serusers] Setting radiusclient with SER
by KaiFu Chan 11 Mar '06

11 Mar '06

Hi all: I want to create a billing system by using ser and radius. Is there any document about setting radiusclient with ser? The software are too old to used in document "SIP Express Router RADIUS HOWTO" in iptel.org. Now, I have already installed the radius server and ser & radiuseclient in two computers. The radius server seems to work well, but i am not sure wherter the radius server and radiusclient could be work besause of the difficult steps setting. If I could know more about the setup details that will be grate. Please give me a hand, thank you. Sincerely, Caxton .

1 0

[Users] install and maintain openser from cvs
by Daniel-Constantin Mierla 11 Mar '06

11 Mar '06

Hello, I have added a small tutorial about how to install and maintain OpenSER using CVS sources. http://www.openser.org/dokuwiki/doku.php?id=install_and_maintain_openser_fr… Hopefully it will ease the installation process. Improvements to the document are welcome. Cheers, Daniel

1 0

[Users] PA module not compiling correctly in 1.0.1
by Justin Pearce 11 Mar '06

11 Mar '06

Hey all, I am in the process of setting up an openser machine for sip software testsing to replace our ser machine. This decision came about due to ser not supporting TLS in a readily available form and due to the seeming stagnation of the ser project. I recently downloaded the 1.0.1-tls source to compile. While in the process of duplicating our configuration, I found that openser was complaining that there was a mismatch between the module and the core, stating that the module was 1.0.0 and the core was 1.0.1-tls. Am I missing something in the "make modules" command (make exclude_modules="" modules)? Do I need to add something to the make file for pa.so to make it compile for the appropriate version? Any help would be appreciated. Justin Pearce Price Video Productions Justin(a)PriceVideo.com <mailto:Justin@PriceVideo.com>

2 1

[Users] Getting Started - Basic Proxy
by Robert Kennedy 11 Mar '06

11 Mar '06

Im currently learning OpenSer and have accomplished the following: Installed: Centos 4.2 OpenSer: V1.0.1 I have 2 x-lite client registering and calling each other. Question: How do I proxy on SIP requests to a 3rd part SIP Provider. eg. Sipgate xlite ---> Ser ---> Sipgate Im just getting confused on how to configure the next hop routing? Currently as expected im getting a 404 Not Found unless I call one of the x-lite phones. I want to be able to terminate out to a SIP-to-PSTN provider. Regards Rob.

4 4

[Serusers] nathelper vs rtpproxy
by Nick Hoffman 11 Mar '06

11 Mar '06

Hi guys, I'm having a bit of difficulty understanding when to use nathelper and rtpproxy. If you wouldn't mind fielding my questions below, I'd really appreciate it. In what situations would you use: -nathelper rather than rtpproxy? -rtpproxy rather than nathelper? -both nathelper and rtpproxy? Thanks! -- Nick e: nick.hoffman(a)altcall.com p: +61 7 5591 3588 f: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it.

2 1

RE: [Users] forcing rtpproxy on a call
by Vitaly Nikolaev 10 Mar '06

10 Mar '06

Add if (!method=="REGISTER") record_route(); Somewhere in ur route (before relay but after loose_route) do u have loose_route anyway ? ________________________________ From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Script Head Sent: Thursday, March 09, 2006 6:44 PM To: users(a)openser.org Subject: Re: [Users] forcing rtpproxy on a call Now that my rtpproxy actually passes traffic I stumbled on another problem. When the called party hangs up the call (asterisk command Hangup()) the soft phone remains connected. Yet, when I click the Hangup button on the softphone, SER receives BYE messages. On 3/9/06, Vitaly Nikolaev <vnikolaev(a)intermedia.net> wrote: Looks like forward includes relay in it. And by putting force_rtpproxy AFTER forward you does not give it a chance :-) on_reply route is also MUST be there. ________________________________ From: users-bounces(a)openser.org [mailto: users-bounces(a)openser.org <mailto:users-bounces@openser.org> ] On Behalf Of Script Head Sent: Thursday, March 09, 2006 12:59 PM To: users(a)openser.org Subject: Re: [Users] forcing rtpproxy on a call Thank you guys, it's working now. Apparently, rewritehostport("<ip>:<port>") works great with rptproxy while forward does exactly that, forwards the call to the destination bypassing the force_rtp_proxy request. This should be documented somewhere. ScriptHead On 3/9/06, Vitaly Nikolaev <vnikolaev(a)intermedia.net> wrote: 1. I never used forward, see my example, I do not know if it actually relay call or not 2. if you do not have NAT between client and server you do not need force_rport, and try to avoid any nat_uac_test, etc if you are actually working on private ips without nat 3. you MUST enable proxy also for reply route[x] { ..... force_rtp_proxy(); t_on_reply("1"); rewritehostport("x.x.x.x:5060"); if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (!(status=~"183" || status=~"200")) break; force_rtp_proxy(""); } ________________________________ From: users-bounces(a)openser.org [mailto: users-bounces(a)openser.org <mailto:users-bounces@openser.org> ] On Behalf Of Script Head Sent: Wednesday, March 08, 2006 6:29 PM To: users(a)openser.org Subject: [Users] forcing rtpproxy on a call Hello everyone, I am trying to debug why my rtpproxy isn't working. I have the following setup, on my LAN. softphone (192.168.1.100) -> openser/rtpproxy ( 192.168.1.10 <http://192.168.1.10> ) -> asterisk (192.168.1.12) The rtpproxy is running and I see commands flying thru it. the following route works if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; } when I replace it with this route if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; force_rport(); force_rtp_proxy(); } I get dead air while asterisk logs show that my test message is playing. How should I proceed to debug this? ScriptHead

2 1

[Users] OpenSER with freeRadius
by C. Ed Felt 10 Mar '06

10 Mar '06

4 5

[Users] 1.0.1 bug? Doesn't appear serious
by Matt Schulte 10 Mar '06

10 Mar '06

All, Been running 1.0.1 since last night and started noticing these errors, can anyone indicate the seriousness of this error? It doesn't appear to be affecting call flow. BUG:tm:run_failure_handlers: stack level is 1!!

2 4

RE: [Users] forcing rtpproxy on a call
by Vitaly Nikolaev 10 Mar '06

10 Mar '06

Looks like forward includes relay in it. And by putting force_rtpproxy AFTER forward you does not give it a chance :-) on_reply route is also MUST be there. ________________________________ From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Script Head Sent: Thursday, March 09, 2006 12:59 PM To: users(a)openser.org Subject: Re: [Users] forcing rtpproxy on a call Thank you guys, it's working now. Apparently, rewritehostport("<ip>:<port>") works great with rptproxy while forward does exactly that, forwards the call to the destination bypassing the force_rtp_proxy request. This should be documented somewhere. ScriptHead On 3/9/06, Vitaly Nikolaev <vnikolaev(a)intermedia.net> wrote: 1. I never used forward, see my example, I do not know if it actually relay call or not 2. if you do not have NAT between client and server you do not need force_rport, and try to avoid any nat_uac_test, etc if you are actually working on private ips without nat 3. you MUST enable proxy also for reply route[x] { ..... force_rtp_proxy(); t_on_reply("1"); rewritehostport("x.x.x.x:5060"); if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (!(status=~"183" || status=~"200")) break; force_rtp_proxy(""); } ________________________________ From: users-bounces(a)openser.org [mailto: users-bounces(a)openser.org <mailto:users-bounces@openser.org> ] On Behalf Of Script Head Sent: Wednesday, March 08, 2006 6:29 PM To: users(a)openser.org Subject: [Users] forcing rtpproxy on a call Hello everyone, I am trying to debug why my rtpproxy isn't working. I have the following setup, on my LAN. softphone (192.168.1.100) -> openser/rtpproxy ( 192.168.1.10 <http://192.168.1.10> ) -> asterisk (192.168.1.12) The rtpproxy is running and I see commands flying thru it. the following route works if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; } when I replace it with this route if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; force_rport(); force_rtp_proxy(); } I get dead air while asterisk logs show that my test message is playing. How should I proceed to debug this? ScriptHead

4 4

[Users] Usrloc performance
by Teemu Harju 10 Mar '06

10 Mar '06

Hi! I've been running some performance tests on my OpenSER box and while registering large number of users I faced some very strange problems. At least they seem strange to me, but I hope someone on this list would be able to shed some light on this. So, I use Openser 1.0.1 and I load test it using SIPp. I've done tests creating about 1000 registrations per second registering 300k-450k different users. Register rate is constat and for each register different user is used. What is strange to me that just about when 300k users have registered the CPU of the PC running the proxy hits 100% usage and messages start dropping. I made a nice image to illustrate my problem using Excel. I attached it to this mail. On this test I registered 300k different users at 1000 RPS and after registering those users the registering starts again from the beginning. As you can see from it the CPU usage rises constantly and drops immediately after I've registered 300k users and the registering starts again from the start. So then each user is being registered all over again, but still the CPU load grows. Does anyone have explanation for this? Why does the CPU usage grow based on the number of users registered? And why does it drop for a while when registering starts all over again? I've tried different usrloc modes, but there seems to be no difference. This one was done with having usrloc only in the memory. Regards, Teemu -- Teemu Harju http://www.teemuharju.net

2 4

[Serusers] Usrloc performance
by Teemu Harju 10 Mar '06

10 Mar '06

Hi! I posted about this same subject to openser mailing list already, but since I haven't had response from there I'll try here. I guess the usrloc module and the core functionality is quite the same with ser and openser. I've been running some performance tests on my OpenSER box and while registering large number of users I faced some very strange problems. At least they seem strange to me, but I hope someone on this list would be able to shed some light on this. So, I use Openser 1.0.1 and I load test it using SIPp. I've done tests creating about 1000 registrations per second registering 300k-450k different users. Register rate is constat and for each register different user is used. What is strange to me that just about when 300k users have registered the CPU of the PC running the proxy hits 100% usage and messages start dropping. I made a nice image to illustrate my problem using Excel. Check it at http://www.teemuharju.net/wp-images/register_300k_users_at_1000rps.png. On this test I registered 300k different users at 1000 RPS and after registering those users the registering starts again from the beginning. As you can see from it the CPU usage rises constantly and drops immediately after I've registered 300k users and the registering starts again from the start. So then each user is being registered all over again, but still the CPU load grows. Does anyone have explanation for this? Why does the CPU usage grow based on the number of users registered? And why does it drop for a while when registering starts all over again? I've tried different usrloc modes, but there seems to be no difference. This one was done with having usrloc only in the memory. Shouldn't the CPU usage at constant register rate, be somewhat constant also? Has anyone else noticed the same problem? Could this be somehow explained or do I have something wrong with my system? Regards, Teemu -- Teemu Harju http://www.teemuharju.net

2 3

[Serusers] Suggest me any of (stable) Java based Softphone
by Friend 10 Mar '06

10 Mar '06

Hi Friend, Can I ask you to suggest me for any of the Java based Softphone that you are using it in the real time environment. Point me to any of the stable releases. I just came to know the "SipCommunicator" a java based one, but it is not stable enough. Thanks ya, Se. --------------------------------- To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre.

3 4

[Users] upgrade from 1.0.0 to 1.0.1
by unplug 10 Mar '06

10 Mar '06

Hi, I installed openser 1.0.0 from source. Now I want to upgrade to 1.0.1. What is the process that I need to care? unplug

2 1

[Users] core dump in last cvs
by Helge Waastad 10 Mar '06

10 Mar '06

Hi, I got core dump in last cvs..... (gdb) bt #0 0x007787a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 #1 0x007b87d5 in raise () from /lib/tls/libc.so.6 #2 0x007ba149 in abort () from /lib/tls/libc.so.6 #3 0x007b1db1 in __assert_fail () from /lib/tls/libc.so.6 #4 0x0809f483 in reset_avps () #5 0x08078cef in receive_msg () #6 0x08099609 in udp_rcv_loop () #7 0x08066df2 in main_loop () #8 0x08067585 in main () br hw -- Helge Waastad Senior Konsulent Systemavdelingen Smartnet

2 1

[Serusers] Problem with mysql and location table
by Benito Caracuel 10 Mar '06

10 Mar '06

Hello all, I have installed mysql module and I could generate the tables with "ser_mysql.sh create" script but when I run a register, SER can`t insert the value into location table. If I write: #mysql -u ser the reply is: ERROR 1045: Access denied for user: 'ser@localhost' (Using password: NO) Could someone help me? Thank you.

1 0

[Serusers] 9.3 core dumping on FreeBSD 6/AMD64
by Cstdenis 10 Mar '06

10 Mar '06

Any ideas? Anyone having success on this platform? Minimal ser.cfg => http://pastebin.ca/45075 gdb ser /ser.core => http://pastebin.ca/45076 (excert below) #0 0x00000008006c5cc3 in __error () from /usr/lib/libpthread.so.2 #1 0x00000008006b8ec6 in _pthread_mutex_trylock () from /usr/lib/libpthread.so.2 #2 0x00000008006ba3e9 in pthread_mutex_lock () from /usr/lib/libpthread.so.2 #3 0x0000000800bfec73 in reply_received () from /usr/local/lib/ser/modules/tm.so #4 0x00000000004115b1 in forward_reply () ser1# uname -mrs FreeBSD 6.0-RELEASE-p4 amd64 ser1# ser -V version: ser 0.9.3 (amd64/freebsd) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, USE_PTHREAD_MUTEX MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197 2004/12/03 19:09:31 andrei Exp $ main.c compiled on 15:22:58 Mar 9 2006 with gcc 3.4 partial debug output from log_stderror=yes 4(66703) After parse_msg... 4(66703) forward_reply: found module tm, passing reply to it 4(66703) DEBUG: t_check: msg id=1 global id=0 T start=0xffffffffffffffff 4(66703) parse_headers: flags=17 4(66703) parse_headers: flags=4 4(66703) DEBUG: t_reply_matching: hash 11892 label 200433279 branch 0 4(66703) DEBUG: t_reply_matching: reply matched (T=0x801241cb0)! 4(66703) DEBUG: t_check: msg id=1 global id=1 T end=0x801241cb0 4(66703) DEBUG: reply_received: org. status uas=100, uac[0]=0 local=0 is_invite=1) 23(66722) DBG: tcp_main_loop: dead child 4 (shutting down?) 0(66699) child process 66703 exited by a signal 11 0(66699) core was generated 0(66699) INFO: terminating due to SIGCHLD 17(66716) INFO: signal 15 received 17(66716) Memory status (pkg): 17(66716) qm_status (0x5bdf60): 17(66716) heap size= 1005488 17(66716) used= 14064, used+overhead=61312, free=944176 17(66716) max used (+overhead)= 61760 17(66716) dumping all alloc'ed. fragments:

1 0

RE: [Serusers] Any advice on Softphones to try with
by Bart J. Smit 09 Mar '06

09 Mar '06

SJPhone from http://www.sjlabs.com/ since it's easy to configure and has good cross-platform support (Windows, Linux, MacOS, PocketPC) Bart... -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Arek Bekiersz Sent: 09 March 2006 11:22 To: follow_from(a)yahoo.co.uk Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Any advice on Softphones to try with CounterTech (former X-Pro): * X-Lite * X-Pro (both discontinued) * EyeBeam audio edition * EyeBeam video edition NCH * Express Talk -- Regards, Arek Bekiersz Friend wrote: > Hi Friends, > > I would like to know your experience on using any of the softphones on > your way,, can you suggest me to have a try with your likely ones,, > > am running ser release v_0_9_3 > > Thank You, > > Se. _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Users] LCR: how to leave Request-URI unchanged
by Papadopoulos Georgios 09 Mar '06

09 Mar '06

Hello, Question about how LCR works: User1 sends a request for the PSTN to OpenSER. # 213.5.17.236:5060 -> 213.5.43.4:5060 INVITE sip:0030211687293@altecnet.gr SIP/2.0. OpenSER uses LCR and sends the request statefully to the PSTN gateway # 213.5.43.4:5060 -> 213.5.xxx.xxx:5060 INVITE sip:0030211687293@213.5.xxx.xxx:5060 SIP/2.0. Is it possible to maintain the domain info in the request that is sent to the gateway? I mean is it possible to send the request as follows: # 213.5.43.4:5060 -> 213.5.xxx.xxx:5060 INVITE sip:0030211687293@altecnet.gr:5060 SIP/2.0. Maybe I am wrong, but I think that this should be allowed. Thank you for any help. George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Serusers] Ser-0.9.6 --> CVS -head = ouch
by warren＠ofelo.com 09 Mar '06

09 Mar '06

Hello All, I encountered a few problems while migrating from Ser-0.9.6 to the latest code in CVS. In general, I wish that the job would have been less painful. The documentation (i.e. READMEs) requires updating in a bad way. Here are the problems I encountered when SER parsed my ser.cfg file. 1. modparam("group", "use_domain", 0) is NO longer valid even though the README in the module group says so. How do I do this in the latest code base? 2. is_user_in("Request-URI", "voicemail") is NO longer valid. What is the new command? 3. check_to() is NO longer valid even though the README in the uri_db module says so. What is the new command for this? 4. check_from() is NO longer valid even though the README in the uri_db module says so. What is the new command for this? 5. is_user("replicator") is NO longer valid. What is the new command for this? Any help would be appreciated. /w

3 2

RE: [Serusers] Radius Accounting encoding issues.
by Vitaly Nikolaev 09 Mar '06

09 Mar '06

ONLY if you use freeradius and sql module, go to the source of freeradius, find file: src/modules/rlm_sql/rlm_sql.c open it in editor, search it for "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"}, string, that the list or characters that radius WILL NOT ENCODE AND WILL SEND IT AS IS, just add * in the list, recompile radius and try again.. should work -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of sip Sent: Thursday, March 09, 2006 2:08 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Radius Accounting encoding issues. I've set up radius accounting in SER 0.9.6 and I'm sure I'm missing something obvious, but when it encodes the URIs for things like CalledStationID or UserName, it's encoding the non-standard characters as hex. For instance, * becomes =2A , so my URI ends up looking like sip:=2A850XXXXXXX@domain.com where it should be sip:*850XXXXXXX@domain.com Is there something I'm missing in the table setup for the radacct table or a modparam somewhere that I missed in the README? N. _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

RE: [Serusers] g729
by Igor Balk 09 Mar '06

09 Mar '06

Actually as far as I recall according to g729 license agreement code could be used for educational and research reasons without paying any license fees but it only apply to the standard code. Digium may or may not provide Asterisk version of the codec for free. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Vitaly Nikolaev Sent: Thursday, March 09, 2006 1:01 PM To: Kapil Dhawan; rjgonzale(a)gmail.com Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] g729 Hehe.. still u have to go to digium and/or search for asterisk documentation or/and go to asterisk mailing list to get answer to ur question, Ser is signaling only PROXY/REGISTRAR server, all conference/codec issues will be done on asterisk, ser can only forward the call to asterisk. I do not think here is educational license... but u can buy real one for 10$ only, or there is some information about g729 that provided by Intel as demo/test of their processors that can be hacked to work with asterisk, looks for that keywords on Google or ask on asterisk forums, SER has nothing with it. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Kapil Dhawan Sent: Thursday, March 09, 2006 12:26 PM To: rjgonzale(a)gmail.com Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] g729 Hi Rodrigo Thx for the reply. Well i am aware of this fact so i mentioned that i need it for Conferencing. >From: Rodrigo Gonzalez <rjgonzale(a)gmail.com> >To: Kapil Dhawan <sersavvy(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] g729 >Date: Thu, 09 Mar 2006 14:14:40 -0300 > >http://www.digium.com/ > >SER does not know about codecs, this is for Asterisk > >Kapil Dhawan wrote: > >>Hi Guys >> >>I want to try g729 with SER + Asterisk with conferencing. Where can i get >>an educational license from. >> >>_________________________________________________________________ >>All that you wanted to know about Ms Beautiful Lips >>http://server1.msn.co.in/Profile/katrina.asp >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> _________________________________________________________________ STILL SINGLE? Get married through MSN Matrimony. Join now for FREE! http://www.shaadi.com/msn/matrimonials.php _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] loose_route's bug?
by Ramin Nikaeen 09 Mar '06

09 Mar '06

Hi Everyone, I am really stuck here. I really need help! I receive the following ACK request in SER from a Linksys/PAP user agent that SER should forward to the destination User Agent: 2010000002. ACK sip:2010000002@10.1.10.65:5060 SIP/2.0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5fb5b16;rport From: 2224440133 <sip:2224440133@host.domain.com>;tag=692c5bafde7b5655o0 To: <sip:2224449999@host.domain.com>;tag=3b968d2d Call-ID: c813c237-8673e16d(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 70 Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr>, <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr> Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 But SER's loose_route incorrectly modifies this ACK as follows: ACK sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5fb5b16;rport=5060 From: 2224440133 <sip:2224440133@host.domain.com>;tag=692c5bafde7b5655o0 To: <sip:2224449999@host.domain.com>;tag=3b968d2d Call-ID: c813c237-8673e16d(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 16 Route: Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 Which causes the ACK to keep looping through SER: ACK sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5fb5b16;rport=5060 From: 2224440133 <sip:2224440133@host.domain.com>;tag=692c5bafde7b5655o0 To: <sip:2224449999@host.domain.com>;tag=3b968d2d Call-ID: c813c237-8673e16d(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 15 Route: Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 ACK sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=692c5bafde7b5655o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5fb5b16;rport=5060 From: 2224440133 <sip:2224440133@host.domain.com>;tag=692c5bafde7b5655o0 To: <sip:2224449999@host.domain.com>;tag=3b968d2d Call-ID: c813c237-8673e16d(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 14 Route: Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 I am really stuck. Can anyone tell me what is happening?! Thanks ramin

2 1

RE: [Serusers] Radius Accounting encoding issues.
by Vitaly Nikolaev 09 Mar '06

09 Mar '06

That 100% radius... I've been thru it. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Jan Janak Sent: Thursday, March 09, 2006 2:23 PM To: sip Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Radius Accounting encoding issues. Are you sure this encoding is done by SER ? I have never seen this, perhaps it is server-side problem ? Can you try to see what is in RADIUS packets sent by SER ? Jan. sip wrote: > I've set up radius accounting in SER 0.9.6 and I'm sure I'm missing something > obvious, but when it encodes the URIs for things like CalledStationID or > UserName, it's encoding the non-standard characters as hex. For instance, * > becomes =2A , so my URI ends up looking like sip:=2A850XXXXXXX@domain.com > where it should be sip:*850XXXXXXX@domain.com > > Is there something I'm missing in the table setup for the radacct table or a > modparam somewhere that I missed in the README? > > N. > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Radius Accounting encoding issues.
by sip 09 Mar '06

09 Mar '06

I've set up radius accounting in SER 0.9.6 and I'm sure I'm missing something obvious, but when it encodes the URIs for things like CalledStationID or UserName, it's encoding the non-standard characters as hex. For instance, * becomes =2A , so my URI ends up looking like sip:=2A850XXXXXXX@domain.com where it should be sip:*850XXXXXXX@domain.com Is there something I'm missing in the table setup for the radacct table or a modparam somewhere that I missed in the README? N.

2 1

[Serusers] possible rr bug
by Ramin Nikaeen 09 Mar '06

09 Mar '06

Hi Everyone, I am really stuck here. I really need help! I receive the following ACK request in SER from a Linksys/PAP user agent that SER should forward to the destination User Agent: 1234560133. ------------------------------------------------------------------------ --------------------------------------------------- ACK sip:10.1.10.65;ftag=cff8d63370ff3ed5o0 SIP/2.0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5b186b5;rport From: 1234560133 <sip:2224440133@host.domain.name>;tag=cff8d63370ff3ed5o0 To: <sip:1234560131@host.domain.name>;tag=26001139010904 Call-ID: 9b54d80b-81b366dd(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 70 Route: <sip:1234569999@10.1.10.65:5060> Contact: 1234560133 <sip:1234560133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 ------------------------------------------------------------------------ --------------------------------------------------- But the loose_route function transforms it to the following and as a result it is routed back to SER and therefore falls into an infinite loop as shown by the couple of ACKs that get looped through SER: ------------------------------------------------------------------------ --------------------------------------------------- ACK sip:10.1.10.65;ftag=cff8d63370ff3ed5o0 SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5b186b5;rport=5060 From: 2224440133 <sip:2224440133@cl1.glphone.com>;tag=cff8d63370ff3ed5o0 To: <sip:2224440131@cl1.glphone.com>;tag=26001139010904 Call-ID: 9b54d80b-81b366dd(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 16 Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 ------------------------------------------------------------------------ --------------------------------------------------- ACK sip:10.1.10.65;ftag=cff8d63370ff3ed5o0 SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5b186b5;rport=5060 From: 2224440133 <sip:2224440133@cl1.glphone.com>;tag=cff8d63370ff3ed5o0 To: <sip:2224440131@cl1.glphone.com>;tag=26001139010904 Call-ID: 9b54d80b-81b366dd(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 15 Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 ------------------------------------------------------------------------ --------------------------------------------------- ACK sip:10.1.10.65;ftag=cff8d63370ff3ed5o0 SIP/2.0 Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Record-Route: <sip:10.1.10.65;ftag=cff8d63370ff3ed5o0;lr=on> Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 10.1.10.65;branch=0 Via: SIP/2.0/UDP 172.16.15.51:5060;branch=z9hG4bK-5b186b5;rport=5060 From: 2224440133 <sip:2224440133@cl1.glphone.com>;tag=cff8d63370ff3ed5o0 To: <sip:2224440131@cl1.glphone.com>;tag=26001139010904 Call-ID: 9b54d80b-81b366dd(a)172.16.15.51 CSeq: 101 ACK Max-Forwards: 14 Contact: 2224440133 <sip:2224440133@172.16.15.51:5060> User-Agent: Linksys/PAP2-3.1.5(LS) Content-Length: 0 I put some debug messages in rr and this is what I get: DEBUG: -ramin- modules/rr/loose_route: jumping to after_strict after_strict: No next URI found It seems as if the after_strict is invoked and it can not find the next URI! Can you please tell me why SER can not route this properly! Thank you so much for your kind help ramin

1 0

RE: [Serusers] g729
by Vitaly Nikolaev 09 Mar '06

09 Mar '06

Hehe.. still u have to go to digium and/or search for asterisk documentation or/and go to asterisk mailing list to get answer to ur question, Ser is signaling only PROXY/REGISTRAR server, all conference/codec issues will be done on asterisk, ser can only forward the call to asterisk. I do not think here is educational license... but u can buy real one for 10$ only, or there is some information about g729 that provided by Intel as demo/test of their processors that can be hacked to work with asterisk, looks for that keywords on Google or ask on asterisk forums, SER has nothing with it. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Kapil Dhawan Sent: Thursday, March 09, 2006 12:26 PM To: rjgonzale(a)gmail.com Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] g729 Hi Rodrigo Thx for the reply. Well i am aware of this fact so i mentioned that i need it for Conferencing. >From: Rodrigo Gonzalez <rjgonzale(a)gmail.com> >To: Kapil Dhawan <sersavvy(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] g729 >Date: Thu, 09 Mar 2006 14:14:40 -0300 > >http://www.digium.com/ > >SER does not know about codecs, this is for Asterisk > >Kapil Dhawan wrote: > >>Hi Guys >> >>I want to try g729 with SER + Asterisk with conferencing. Where can i get >>an educational license from. >> >>_________________________________________________________________ >>All that you wanted to know about Ms Beautiful Lips >>http://server1.msn.co.in/Profile/katrina.asp >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> _________________________________________________________________ STILL SINGLE? Get married through MSN Matrimony. Join now for FREE! http://www.shaadi.com/msn/matrimonials.php _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

RE: [Users] forcing rtpproxy on a call
by Vitaly Nikolaev 09 Mar '06

09 Mar '06

1. I never used forward, see my example, I do not know if it actually relay call or not 2. if you do not have NAT between client and server you do not need force_rport, and try to avoid any nat_uac_test, etc if you are actually working on private ips without nat 3. you MUST enable proxy also for reply route[x] { ..... force_rtp_proxy(); t_on_reply("1"); rewritehostport("x.x.x.x:5060"); if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (!(status=~"183" || status=~"200")) break; force_rtp_proxy(""); } ________________________________ From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Script Head Sent: Wednesday, March 08, 2006 6:29 PM To: users(a)openser.org Subject: [Users] forcing rtpproxy on a call Hello everyone, I am trying to debug why my rtpproxy isn't working. I have the following setup, on my LAN. softphone (192.168.1.100) -> openser/rtpproxy ( 192.168.1.10 <http://192.168.1.10> ) -> asterisk (192.168.1.12) The rtpproxy is running and I see commands flying thru it. the following route works if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; } when I replace it with this route if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; force_rport(); force_rtp_proxy(); } I get dead air while asterisk logs show that my test message is playing. How should I proceed to debug this? ScriptHead

2 1

[Serusers] g729
by Kapil Dhawan 09 Mar '06

09 Mar '06

Hi Guys I want to try g729 with SER + Asterisk with conferencing. Where can i get an educational license from. _________________________________________________________________ All that you wanted to know about Ms Beautiful Lips http://server1.msn.co.in/Profile/katrina.asp

2 2

[Serusers] calls returning from hold not utilizing mediaproxy
by Brett N 09 Mar '06

09 Mar '06

Ok, I've roughly used the examples that are included in the modules/mediaproxy/ser.cfg file to use mediaproxy. The initial call is set up very nicely. However reinvites don't seem to be processsed right. When I place the call on hold, I can see that mediaproxy sees the call on hold (with the sessions tool). However, when I return to the call from hold, the reinvite just sets the devices up to each other direct without the mediaproxy. Mediaproxy will for about 1 second show the call come back to "ACTIVE" and then to "IDLE". I'm sure the rtp isn't being proxied because 1. I can kill the proxy, and still pass audio 2. the sessions tool doesn't show packets being transmitted 3. the SDP isn't pointing to the mediaproxy. I can't figure out what I'm doing wrong. However, mediaproxy sees to be very sensitive on how it's called. Per the example, use_media_proxy() will be called TWICE for a new call. This works for the initial call.. However, I removed the initial call to use_media_proxy and only left the one in the on_reply route. Doing this totally broke it and routed the calls without media proxy. **** Oh, something that is worth mentioning. In the example file, there is an end_media_session() at the begining of the on_reply block. If this is in there, no calls will goto the mediaproxy ever. I get an error message: 3(3114) error: use_media_proxy(): empty response from mediaproxy So I removed it to get where I am now. Here are the relevant parts of my config: # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=2 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://ser:xxxxx@172.16.10.103:3306/ser" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 listen=192.168.1.10:5060 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/domain.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("auth_db","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("uri_db","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("domain","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("dip","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("usrloc","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("domain","domain_table","domain") modparam("domain","domain_col","domain") modparam("domain","db_mode",0) modparam("auth_db","use_domain",1) # modparam("usrloc", "db_mode", 2) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "load_credentials", "rpid,vm_timer") modparam("tm", "fr_inv_timer_avp", "vm_timer") # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "natping_interval", 60) modparam("registrar" , "nat_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); return; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol ### Fix natted requests if (client_nat_test("3")) { log(1,"***** PERFORMING NAT FIXUP\n"); setflag(2); force_rport(); fix_contact(); }; record_route(); if (client_nat_test("3") && !search("^Record-Route:")) { # Mark call as being natted force_rport(); fix_contact(); }; #### Process registrations if (method=="REGISTER") { log(1,"***** REGISTERING\n"); if (is_from_local()) { log(1,"**** IS FROM LOCAL\n"); # Mark as NAT'ed if (client_nat_test("3")) { log(1,"***** PERFORMING NAT FIXUP\n"); setflag(2); force_rport(); fix_contact(); }; if (!www_authorize("", "subscriber")) { log(1,"**** ASKING FOR CREDS\n"); www_challenge("", "0"); return; } else if (!check_to()) { sl_send_reply("403", "Username!=To not allowed"); return; }; log(1,"*** ATTEMPTING TO SAVE CONTACT\n"); if (!save("location")) { sl_reply_error(); }; } else { sl_send_reply("403", "This domain is not served here"); }; return; }; ### All invites must be authenticated.. do this first if (method=="INVITE") { if(!www_authorize("","subscriber")) { log(1,"**** ASKING FOR CREDS\n"); www_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Username must equal the from address"); return; }; log(1,"**** APPENDING RPID\n"); append_rpid_hf("<sip:", "@192.168.1.10>;privacy=off"); } # make sure a leg is local somewhere if (method=="INVITE") { if (!(is_from_local() || is_uri_host_local())) { sl_send_reply("403", "Relaying is forbidden"); return; } t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { log(1,"Ending session sec-1\n"); end_media_session(); }; # resolve aliases if (!lookup("aliases")) { log(1,"*** Call is not in aliases table\n"); } # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { log(2,"**** PERFORMING LOOSE ROUTE\n"); if (method=="INVITE" || method=="ACK"){ use_media_proxy(); }; append_hf("P-hint: rr-enforced\r\n"); log(1," *** USE MEDIA PROXY\n"); t_relay(); return; }; if (method == "INVITE") { t_on_reply("1"); }; if (is_uri_host_local()) { if (!lookup("location")) { log(1," **** location lookup failed\n"); # lookup failed.. probably a pstn call use_media_proxy(); rewritehostport("voip_gw"); if (!t_relay()) { sl_reply_error(); return; } return; } } if (method=="INVITE" || method =="ACK") { log(1," *** USE MEDIA PROXY\n"); use_media_proxy(); } if (method=="OPTIONS") { sl_send_reply("404", "Pong - Go away"); return; } if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); log (1," Ending session sec-2\n"); }; sl_reply_error(); return; } } failure_route[1] { end_media_session(); log(1,"Ending session sec-3\n"); } onreply_route[1] { end_media_session(); log(1,"******* In onreply route block\n"); if (status=~"(183)|(2[09][09])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); } }

1 0

[Serusers] calls returning from hold not utilizing mediaproxy
by Brett N 09 Mar '06

09 Mar '06

Ok, I've roughly used the examples that are included in the modules/mediaproxy/ser.cfg file to use mediaproxy. The initial call is set up very nicely. However reinvites don't seem to be processsed right. When I place the call on hold, I can see that mediaproxy sees the call on hold (with the sessions tool). However, when I return to the call from hold, the reinvite just sets the devices up to each other direct without the mediaproxy. Mediaproxy will for about 1 second show the call come back to "ACTIVE" and then to "IDLE". I'm sure the rtp isn't being proxied because 1. I can kill the proxy, and still pass audio 2. the sessions tool doesn't show packets being transmitted 3. the SDP isn't pointing to the mediaproxy. I can't figure out what I'm doing wrong. However, mediaproxy sees to be very sensitive on how it's called. Per the example, use_media_proxy() will be called TWICE for a new call. This works for the initial call.. However, I removed the initial call to use_media_proxy and only left the one in the on_reply route. Doing this totally broke it and routed the calls without media proxy. **** Oh, something that is worth mentioning. In the example file, there is an end_media_session() at the begining of the on_reply block. If this is in there, no calls will goto the mediaproxy ever. I get an error message: 3(3114) error: use_media_proxy(): empty response from mediaproxy So I removed it to get where I am now. Here are the relevant parts of my config: # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=2 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://ser:xxxxx@172.16.10.103:3306/ser" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 listen=192.168.1.10:5060 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/domain.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("auth_db","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("uri_db","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("domain","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("dip","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("usrloc","db_url","mysql://ser:xxxxx@172.16.10.103:3306/ser") modparam("domain","domain_table","domain") modparam("domain","domain_col","domain") modparam("domain","db_mode",0) modparam("auth_db","use_domain",1) # modparam("usrloc", "db_mode", 2) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "load_credentials", "rpid,vm_timer") modparam("tm", "fr_inv_timer_avp", "vm_timer") # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "natping_interval", 60) modparam("registrar" , "nat_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); return; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol ### Fix natted requests if (client_nat_test("3")) { log(1,"***** PERFORMING NAT FIXUP\n"); setflag(2); force_rport(); fix_contact(); }; record_route(); if (client_nat_test("3") && !search("^Record-Route:")) { # Mark call as being natted force_rport(); fix_contact(); }; #### Process registrations if (method=="REGISTER") { log(1,"***** REGISTERING\n"); if (is_from_local()) { log(1,"**** IS FROM LOCAL\n"); # Mark as NAT'ed if (client_nat_test("3")) { log(1,"***** PERFORMING NAT FIXUP\n"); setflag(2); force_rport(); fix_contact(); }; if (!www_authorize("", "subscriber")) { log(1,"**** ASKING FOR CREDS\n"); www_challenge("", "0"); return; } else if (!check_to()) { sl_send_reply("403", "Username!=To not allowed"); return; }; log(1,"*** ATTEMPTING TO SAVE CONTACT\n"); if (!save("location")) { sl_reply_error(); }; } else { sl_send_reply("403", "This domain is not served here"); }; return; }; ### All invites must be authenticated.. do this first if (method=="INVITE") { if(!www_authorize("","subscriber")) { log(1,"**** ASKING FOR CREDS\n"); www_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Username must equal the from address"); return; }; log(1,"**** APPENDING RPID\n"); append_rpid_hf("<sip:", "@192.168.1.10>;privacy=off"); } # make sure a leg is local somewhere if (method=="INVITE") { if (!(is_from_local() || is_uri_host_local())) { sl_send_reply("403", "Relaying is forbidden"); return; } t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { log(1,"Ending session sec-1\n"); end_media_session(); }; # resolve aliases if (!lookup("aliases")) { log(1,"*** Call is not in aliases table\n"); } # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { log(2,"**** PERFORMING LOOSE ROUTE\n"); if (method=="INVITE" || method=="ACK"){ use_media_proxy(); }; append_hf("P-hint: rr-enforced\r\n"); log(1," *** USE MEDIA PROXY\n"); t_relay(); return; }; if (method == "INVITE") { t_on_reply("1"); }; if (is_uri_host_local()) { if (!lookup("location")) { log(1," **** location lookup failed\n"); # lookup failed.. probably a pstn call use_media_proxy(); rewritehostport("voip_gw"); if (!t_relay()) { sl_reply_error(); return; } return; } } if (method=="INVITE" || method =="ACK") { log(1," *** USE MEDIA PROXY\n"); use_media_proxy(); } if (method=="OPTIONS") { sl_send_reply("404", "Pong - Go away"); return; } if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); log (1," Ending session sec-2\n"); }; sl_reply_error(); return; } } failure_route[1] { end_media_session(); log(1,"Ending session sec-3\n"); } onreply_route[1] { end_media_session(); log(1,"******* In onreply route block\n"); if (status=~"(183)|(2[09][09])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); } }

1 0

RE: [Serusers] SER + Asterisk; BYE gets 404
by Bart J. Smit 09 Mar '06

09 Mar '06

I suspect that asterisk is not seeing the ACK and BYE as part of the session, since the original INVITE was sent to XXXX(a)pbx.nexusmgmt.com and all other SIP messages are forwarded to 65.126.236.148. I have tried to change the forward from the IP to the FQDN, but the invite no longer reaches the internal UA if I do. Is there a setting to instruct ser to do a lookup on a forward, or is forward limited to IP address? Bart... -----Original Message----- From: Dr. Rodney G. McDuff [mailto:mcduff@its.uq.edu.au] Sent: 09 March 2006 00:43 To: Bart J. Smit Subject: Re: [Serusers] SER + Asterisk; BYE gets 404 Hi Bart Bart J. Smit wrote: > Hi Rodney, > > The entire conversation is in UDP. I've attached the SIP packets from > the ethereal trace. > > Firstly it seems that the ACKs from SJPhone in response to the 200 OK from your asterisk box arn't getting thru to the asterisk box. Thats why the asterisk box continues to send the 200 OKs. Eventually the SJPhone send a BYE (is that you or a timeout?). What is strange is the SER box authored the 404 Not found response. If the SER and asterisk is on the same box can you run ethereal this box and can change the capture filter to get the both sides of the conversation. Maybe something like 'port 5060 or port 5065'. Also what is 80.176.149.91? > Bart... > > -----Original Message----- > From: Dr. Rodney G. McDuff [mailto:mcduff@its.uq.edu.au] > Sent: 07 March 2006 23:38 > To: Bart J. Smit; serusers(a)lists.iptel.org > Subject: Re: [Serusers] SER + Asterisk; BYE gets 404 > > Hi Bart > Have you got the SER box doing any (TCP/UDP) protocol conversion. > Ie is your phone using TCP (as * only does UDP). > > Bart J. Smit wrote: > >> I am running ser 0.9.6 on CentOS 4.2 with asterisk on the same box >> listening on 5065. >> >> When I register a phone with ser, I can call XXXX(a)pbx.nexusmgmt.com >> > and > >> these calls are forwarded to the asterisk on a forward(<external >> IP>,5065). I've attached my full routing block below. >> >> After hanging up from either phone, the BYE packet never gets >> > delivered. > >> It shows up in ethereal as being addressed to the external IP address >> > of > >> the box and it gets a 404 in reply. >> >> When I register a phone directly with the Asterisk, I can hang up from >> either end as normal, so the issue must be with ser. >> >> Any hints on how I can route the BYE packets correctly? >> >> Thanks, >> >> Bart... >> >> >> route { >> >> # >> ----------------------------------------------------------------- >> # Sanity Check Section >> # >> ----------------------------------------------------------------- >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483", "Too Many Hops"); >> break; >> }; >> >> if (msg:len > max_len) { >> sl_send_reply("513", "Message Overflow"); >> break; >> }; >> # >> ----------------------------------------------------------------- >> # Record Route Section >> # >> ----------------------------------------------------------------- >> if (method!="REGISTER") { >> record_route(); >> }; >> >> # >> ----------------------------------------------------------------- >> # Loose Route Section >> # >> ----------------------------------------------------------------- >> if (loose_route()) { >> t_relay(); >> break; >> }; >> >> # >> ----------------------------------------------------------------- >> # Call Type Processing Section >> # >> ----------------------------------------------------------------- >> if (uri=~"sip:[0-9]{4}@pbx\.nexusmgmt\.com") { >> forward(65.126.236.148,5065); >> break; >> }; >> if (uri!=myself) { >> route(1); >> break; >> }; >> >> if (method=="CANCEL") { >> route(1); >> break; >> } else if (method=="INVITE") { >> route(3); >> break; >> } else if (method=="REGISTER") { >> route(2); >> break; >> }; >> >> lookup("aliases"); >> if (uri!=myself) { >> route(1); >> break; >> }; >> >> if (!lookup("location")) { >> sl_send_reply("404", "User Not Found"); >> break; >> }; >> >> route(1); >> } >> >> route[1] { >> >> # >> ----------------------------------------------------------------- >> # Default Message Handler >> # >> ----------------------------------------------------------------- >> >> t_on_reply("1"); >> >> if (!t_relay()) { >> sl_reply_error(); >> }; >> } >> >> route[2] { >> >> # >> ----------------------------------------------------------------- >> # REGISTER Message Handler >> # >> ---------------------------------------------------------------- >> >> sl_send_reply("100", "Trying"); >> >> if (!www_authorize("","subscriber")) { >> www_challenge("","0"); >> break; >> }; >> >> if (!check_to()) { >> sl_send_reply("401", "Unauthorized"); >> break; >> }; >> >> consume_credentials(); >> >> if (!save("location")) { >> sl_reply_error(); >> }; >> } >> >> route[3] { >> >> # >> ----------------------------------------------------------------- >> # INVITE Message Handler >> # >> ----------------------------------------------------------------- >> >> if (!proxy_authorize("","subscriber")) { >> proxy_challenge("","0"); >> log(1,"authenticate please\n"); >> break; >> } else if (!check_from()) { >> sl_send_reply("403", "Use From=ID"); >> break; >> }; >> >> lookup("aliases"); >> if (uri!=myself) { >> route(1); >> break; >> }; >> >> if (!lookup("location")) { >> sl_send_reply("404", "User Not Found"); >> break; >> }; >> >> route(1); >> } >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> > > > -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

1 0

[Serusers] lcr and mysql db
by roger leszczynski 09 Mar '06

09 Mar '06

does any one have an exaple of lcr using mysql? (with some example mysql enteries)

1 0

[Serusers] can I Register SER as a SIP client?
by kemp yuk 09 Mar '06

09 Mar '06

hi, there I'm a newbie of SER, I wounder if SER can register as a SIP client? In this case, SER working as a client can recieve/send calls from a remote SIP server. just like Asterisk has done, adding a line in it's sip.conf: register > user:secret:authuser@remoteSIPhost:port/extension Thanks! --------------------------------- Yahoo! Mail Bring photos to life! New PhotoMail makes sharing a breeze.

2 1

[Serusers] How do I redirect calls to other SIP server
by Sarfaraz Chougule 09 Mar '06

09 Mar '06

Hello, I have installed and configure SER 0.9.6 in our office. <SIP Phone> <----><SER><----> <SIP Phone> Interoffice SIP phone to SIP phone calls are ok. I want to connect to other SIP Provider who is conncted to PSTN, so that from my office SIP phone I can call PSTN numbers <SIP Phone> <----><SER><----> <SIP Phone> | | <INTERNET> | | <SIP Provider> | | | <PSTN> Hope you guys have understood the scenario. Regards Sarfaraz

3 3

[Serusers]Problem on ipv6
by Ren-Huang Liou 09 Mar '06

09 Mar '06

Hi, I can not enable ipv6 on ser. I have been set the following configuration on ser.cfg. listen=2001:238:202:0:230:1bff:feb8:32b9 listen=140.113.131.41 However, I found the following information on /var/log/message: Mar 9 20:10:09 TIPRA-41 ser: WARNING: fix_socket_list: could not rev. resolve 2001:238:202:0:230:1BFF:FEB8:32B9 Mar 9 20:10:09 TIPRA-41 ser: WARNING: fix_socket_list: could not rev. resolve 2001:238:202:0:230:1BFF:FEB8:32B9 I can't receive any 200 OK ,when I had been sent REGISTER using my UA(ipv6 enabled). The following is my "ifconfig" information: TIPRA-41:/home/rhliou # ifconfig eth1 Link encap:Ethernet HWaddr 00:30:1B:B8:32:B9 inet addr:140.113.131.41 Bcast:140.113.131.127 Mask:255.255.255.128 inet6 addr: 2001:238:202:0:230:1bff:feb8:32b9/64 Scope:Global inet6 addr: fe80::230:1bff:feb8:32b9/64 Scope:Link UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1785125 errors:0 dropped:0 overruns:0 frame:0 TX packets:20517 errors:0 dropped:0 overruns:0 carrier:0 collisions:759 txqueuelen:1000 RX bytes:158891946 (151.5 Mb) TX bytes:3155181 (3.0 Mb) Interrupt:169 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:568 errors:0 dropped:0 overruns:0 frame:0 TX packets:568 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:269972 (263.6 Kb) TX bytes:269972 (263.6 Kb) Thanks in advance Best regards, Ren-Huang Liou

1 0

[Serusers] Any advice on Softphones to try with
by Friend 09 Mar '06

09 Mar '06

Hi Friends, I would like to know your experience on using any of the softphones on your way,, can you suggest me to have a try with your likely ones,, am running ser release v_0_9_3 Thank You, Se. --------------------------------- Yahoo! Cars NEW - sell your car and browse thousands of new and used cars online search now ---------------------------------

2 1

[Serusers] Database
by jidn 09 Mar '06

09 Mar '06

Hi list, I need to know if SER have modules for MaxDB Greetings Pablo

2 1

[Serusers] is_registered ??
by Petofi Alex 09 Mar '06

09 Mar '06

Dear all, is there a function or some method to find out whether a specific user is registered or not? I'd like to use it in ser.cfg. Something like 'serctl ul show' Thank you in advance, Best Regards, Balazs Godor ___________________________________________________________________________ [origo] klikkbank lakossági számlacsomag havi 199 Ft-ért, bankkártya éves díj nélkül! http://www.klikkbank.hu

2 1

[Serusers] XML-RPC in CVS-HEAD
by Nick Hoffman 09 Mar '06

09 Mar '06

After talking with clona in #ser on Freenode, I've learned that CVS-HEAD has some great XML-RPC implementation. clona also mentioned that a new release might not be far away. Would anyone mind commenting on how much the current XML-RPC implementation might change between now and the next release? I'd love to use it but am concerned about developing the necessary clients to interact with it now, and having to redo them when the next release comes out. Thanks guys! -- Nick e: nick.hoffman(a)altcall.com p: +61 7 5591 3588 f: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it.

2 1

[Users] fifo ul_show_contact
by Helge Waastad 09 Mar '06

09 Mar '06

Hi, just wonder if it would be interesting to have path also included in fifo ul_show_contact? br hw -- Helge Waastad Senior Konsulent Systemavdelingen Smartnet

2 2

[Users] rtpproxy on a multi-homed box
by Script Head 09 Mar '06

09 Mar '06

I have a box with a bunch of ip addedes assigned to eth0:xx. I want rtpproxy to bind to a particular address and send RTP packets from that address. I see an option -l addr1 but can't figure out if it's the address rtpproxy will expect to receive packets or send from. The rtprpoxy --help isn't exactly helpful. Can someone englighten me?

2 1

[Users] forcing rtpproxy on a call
by Script Head 09 Mar '06

09 Mar '06

Hello everyone, I am trying to debug why my rtpproxy isn't working. I have the following setup, on my LAN. softphone (192.168.1.100) -> openser/rtpproxy (192.168.1.10) -> asterisk ( 192.168.1.12) The rtpproxy is running and I see commands flying thru it. the following route works if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; } when I replace it with this route if(method=="INVITE") { if(uri=~"^sip:[0-9]{6}1[0-9]*{10}@") { forward(192.168.1.12,5060); }; force_rport(); force_rtp_proxy(); } I get dead air while asterisk logs show that my test message is playing. How should I proceed to debug this? ScriptHead

2 1

[Serusers] Nobbie
by Luis Silva 09 Mar '06

09 Mar '06

I there! I'm a novice user using ser and I trying to understand the new dialog module. First of all, is there any documentation about this module? If there isn't, can you tell me what is the objective of using the "bind_dlg_mod" function? Tks in advance

2 1

Re: [Serusers] Carrier-grade framework for SER
by Nick Hoffman 09 Mar '06

09 Mar '06

On Fri January 21 2005 21:21, "Juha Heinanen" <jh(a)lohi.tutpro.com> wrote: > greger, > > we have done some work on xmlprc based provisioning and it looks > promising. xmlrpc spec is three pages long and even i can understand > it. soap spec, on the other hand, is far too thick and goes way above > my head. > > -- juha On Tue January 25 2005 11:36, "Andreas Granig" <andreas.granig(a)inode.info> wrote: > In short, I plan to write an xmlrpc-based provisioning system for > distributing FIFO commands. The main focus is sharing registration > contacts and aliases among different SERs (all the data that can't be > replicated on a lower (database) layer due to memory caching). > > There's an external application on each SER host receiving contacts from > a SER module via a local socket. These contacts are wrapped into xmlrpc > (in fact the contact is converted into a FIFO command which is wrapped > into xmlrpc) and are distributed to the same application on other SER > hosts, which writes them into the SER FIFO. If an application is > unreachable or reports an error, the distributed FIFO command is queued. > > The application can receive arbitrary FIFO commands, and a flag > indicates if the command should be redistributed to the other hosts. > > Andy Hi guys. Browsing through the archives, I happened upon the "Carrier-grade framework for SER" thread, part of which discusses provisioning SER using XML-RPC. Has anything been released for this at any level of "buggyness" or stability? I'm looking to do provisioning in SER with XML-RPC and would prefer not to have to reinvent the wheel if others have already started/finished it. Thanks for any input! -- Nick e: nick.hoffman(a)altcall.com p: +61 7 5591 3588 f: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it.

1 0

[Serusers] I beg you please help me: Radius messages
by Gokhan Uslu 08 Mar '06

08 Mar '06

Hi everybody, I really need your help. Please someone help me. I have to modify the values in the parameters of radius authentication messages. The message below is my default message rad_recv: Access-Request packet from host 127.0.0.1:32797, id=191, length=206 User-Name = "33333(a)192.168.10.233" Digest-Attributes = 0x0a073333333333 Digest-Attributes = 0x01103139322e3136382e31302e323333 Digest-Attributes = 0x022a3433666663333939393362393134376561643630366537353961646535366534666536 6534303732 Digest-Attributes = 0x04147369703a3139322e3136382e31302e323333 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "de5d4886be3f94e241b92b5bf160857a" Service-Type = Sip-Session Sip-Uri-User = "33333" NAS-Port = 5060 NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_digest: Converting Digest-Attributes to something sane... Digest-User-Name = "33333" Digest-Realm = "192.168.10.233" Digest-Nonce = "43ffc39993b9147ead606e759ade56e4fe6e4072" Digest-URI = "sip:192.168.10.233" Digest-Method = "REGISTER" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 0 rlm_realm: Looking up realm "192.168.10.233" for User-Name = "33333(a)192.168.10.233" rlm_realm: No such realm "192.168.10.233" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 182 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type DIGEST In here I want to modfy the User-Name`s value. It is now "33333(a)192.168.10.233" but I want to change it. Also I must change the Digest-URI = "sip:192.168.10.233" parameter`s value. Please help me about radius message modifications. Is it possible with avp_module, but how? Please help me please. I beg all you. Thank you Gokhan USLU

1 0

[Serusers] PROBLEM WHIT MYSQL MODULE.HELP ME!!
by Vincenzo Golia D'Augè 08 Mar '06

08 Mar '06

Hi all, i'm trying to install SER for the first time for a job at university. I'm using the distribution Fedora Core 2 and I have found some problems. This problems come out when I load the modules for MySQL support:mysql.so,auth.so,auth_db.so Asper having loaded this modules when i try to start SER whith the command serctl start it appears the following error: Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed Checking the file log /va/log/messages I have found out that the errors that I had found trying to start the program were the following: Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: Maxfwd module- initializing Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: new_connection(): Client does not support authentication protocol requested by server; consider upgrading MySQL client Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: db_init(): Could not create a connection Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: ERROR: auth_db_ver: unable to open database connection Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: auth_db:str_fixup(): Error while querying table version Mar 7 15:51:29 localhost /usr/local/sbin/ser[4288]: ERROR: fix_expr : fix_actions error May any of you help me,please?It is quite urgent. Thank you. Hear from you soon. Vincenzo

2 1

[Users] Registration Weirdness
by Douglas Garstang 08 Mar '06

08 Mar '06

I have a series of Polycom phones that are tying to register with OpenSER. The phone sends a REGISTER message, and OpenSER replies with Unauthorised (all normal). The phone re-sends the REGISTER with the credentials, and OpenSER sends Ok. Here's where it goes downhill. The polycom's appearance display does not change from an unregistered to a registered state, ie it does not change from an empty phone to a filled in one. It doesn't think it's registered eventhought it's gotten an OK. Then, a regular intervals it keeps trying to register again, because it still thinks it wasn't successful. I have some other Polycom phones that are not doing this. All have the same SIP software version, and all essentially have the same xml config files, with minor variations. Happening with OpenSER 1.0.0 and 1.0.1 I have pasted ngrep output of one of these below. Anyone got any ideas? # U 216.187.128.72:5060 -> 216.187.140.233:5060 REGISTER sip:ipt.oneeighty.com SIP/2.0. Via: SIP/2.0/UDP 216.187.128.72;branch=z9hG4bKca28b8d3BC755D46. From: "Sandy Sauvageau" <sip:2944029@ipt.oneeighty.com>;tag=2A2425B5-B64A4132. To: <sip:2944029@ipt.oneeighty.com>. CSeq: 1 REGISTER. Call-ID: 56150889-214b0f7f-e02e6d9c(a)216.187.128.72. Contact: <sip:2944029@216.187.128.72>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER". User-Agent: PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067. Max-Forwards: 70. Expires: 3600. Content-Length: 0. . # U 216.187.140.233:5060 -> 216.187.128.72:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 216.187.128.72;branch=z9hG4bKca28b8d3BC755D46. From: "Sandy Sauvageau" <sip:2944029@ipt.oneeighty.com>;tag=2A2425B5-B64A4132. To: <sip:2944029@ipt.oneeighty.com>;tag=136c3bb27674cf7e44f7b05275ffaecc.0629. CSeq: 1 REGISTER. Call-ID: 56150889-214b0f7f-e02e6d9c(a)216.187.128.72. WWW-Authenticate: Digest realm="ipt.oneeighty.com", nonce="440e4b3f113243b90ba483b6a2f243ea51377e2d". Server: OpenSer (1.0.0 (i386/linux)). Content-Length: 0. . # U 216.187.128.72:5060 -> 216.187.140.233:5060 REGISTER sip:ipt.oneeighty.com SIP/2.0. Via: SIP/2.0/UDP 216.187.128.72;branch=z9hG4bKff7cb008AF06A32B. From: "Sandy Sauvageau" <sip:2944029@ipt.oneeighty.com>;tag=2A2425B5-B64A4132. To: <sip:2944029@ipt.oneeighty.com>. CSeq: 2 REGISTER. Call-ID: 56150889-214b0f7f-e02e6d9c(a)216.187.128.72. Contact: <sip:2944029@216.187.128.72>;methods="INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER". User-Agent: PolycomSoundPointIP-SPIP_601-UA/1.6.3.0067. Authorization: Digest username="2944029", realm="ipt.oneeighty.com", nonce="440e4b3f113243b90ba483b6a2f243ea51377e2d", uri="sip:ipt.oneeighty.com", response="9d8b4708296f3fb88d5cfd453121860d", algorithm=MD5. Max-Forwards: 70. Expires: 3600. Content-Length: 0. . # U 216.187.140.233:5060 -> 216.187.128.72:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 216.187.128.72;branch=z9hG4bKff7cb008AF06A32B. From: "Sandy Sauvageau" <sip:2944029@ipt.oneeighty.com>;tag=2A2425B5-B64A4132. To: <sip:2944029@ipt.oneeighty.com>;tag=136c3bb27674cf7e44f7b05275ffaecc.32b4. CSeq: 2 REGISTER. Call-ID: 56150889-214b0f7f-e02e6d9c(a)216.187.128.72. Contact: <sip:2944029@216.187.128.72>;expires=3600. Server: OpenSer (1.0.0 (i386/linux)). Content-Length: 0. .

3 2

[Serusers]How to add TLS support on SER?
by Ren-Huang Liou 08 Mar '06

08 Mar '06

Hi, I found nothing about TLS support in serdev.pdf and seruser.pdf. However, I discover the following information : http://lists.iptel.org/pipermail/serdev/2005-March/004037.html Could anyone tell me how to configure TLS on SER 0.96 ? Any documentation? Thanks in advance Best regards, Ren-Huang Liou

2 1

[Users] Change default users and password in MySQL problems
by david.castro 08 Mar '06

08 Mar '06

Hello. I'm David. I'm working with openser 1.0.1 and MySQL 5.0.18. I'd like changing defaults users and passwords to openser talk to MySQL. I edited "openser_mysql.sh" and I changed some variables in that file. I execute "openser_mysql.sh" and the database was created fine. I wrote next statment in openser.cfg: modparam("auth_db", "db_url", "mysql://user:pass@localhost/openser"). Indeed user and pass are the same in mysql. I run openser but gives an error: 0(0) new_connection: Access denied for user 'openser'@'localhost' (using password: YES) I don't have any user called openser in MySQL because I changed "openser_mysql.sh". How I change the defaults users and passwords in openser? Thank you. -- ------------------------------- David Castro Mosquera Adianta Tel: (34) 902 999 178 Fax: (34) 902 501 437 Email: david.castro(a)adianta.net Web: www.adianta.net -------------------------------

3 2

[Serusers] Installing SER using SUSE 10
by Dennis Yongco 08 Mar '06

08 Mar '06

Hello serusers! Need help. I tried to install SER 0.9.6 using SUSE 10 and I encountered RPM build errors using ser.spec.SuSE inside rpm directory. I installed all requirements as stated in INSTALL file and radiusclient-ng before installing SER. TIA. Listed below are last portions of the rpmbuild: Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libdl.so.2 libdl.so.2(GLIBC_2.0) libdl.so.2(GLIBC_2.1) libresolv.so.2 libresolv.so.2(GLIBC_2.2) Conflicts: ser < 0.9.6 ser-mysql < 0.9.6 ser-jabber < 0.9.6 ser-radius < 0.9.6 Processing files: ser-mysql-0.9.6-0.suse910 Finding Provides: /usr/lib/rpm/find-provides Finding Requires: /usr/lib/rpm/find-requires Provides: mysql.so Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires: ser = 0.9.6 /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libmysqlclient.so.12 libz.so.1 Processing files: ser-jabber-0.9.6-0.suse910 Finding Provides: /usr/lib/rpm/find-provides Finding Requires: /usr/lib/rpm/find-requires Provides: jabber.so Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires: ser = 0.9.6 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libexpat.so.0 Processing files: ser-radius-0.9.6-0.suse910 Finding Provides: /usr/lib/rpm/find-provides Finding Requires: /usr/lib/rpm/find-requires Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 Requires: ser = 0.9.6 Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/ser-0.9.6-root error: Installed (but unpackaged) file(s) found: /usr/lib/ser/modules/auth_radius.so /usr/lib/ser/modules/group_radius.so /usr/lib/ser/modules/uri_radius.so RPM build errors: Installed (but unpackaged) file(s) found: /usr/lib/ser/modules/auth_radius.so /usr/lib/ser/modules/group_radius.so /usr/lib/ser/modules/uri_radius.so linux:/usr/src/packages/SPECS # ________________________________________________ Message sent using UebiMiau 2.7.9

2 1

[Serusers] serweb error
by Joao Pereira 08 Mar '06

08 Mar '06

Hello to all I installed the most recent serweb, but when I try to register a new user, there is always an error like this: Fatal error: Call to undefined function: imap_8bit() in /serweb-0.9.4/html/functions.php on line 312 It says that he doesnt understand the "imap_8bit" function. Did someone had this problem? Thanks Joao Pereira

2 3

[Users] OperSER can't handle a maddr tag in the RURI
by Dr. Rodney G. McDuff 08 Mar '06

08 Mar '06

I am try to get Windows Messenger v5.1 to play nicely with other UAs and SER/OpenSER and Asterisk. One of the problems that is confounding me is WM5 non-standard contact header which is of the form: Contact: <sip:user@domain.net:5060;maddr=xxx.xxx.152.57;transport=tcp>;proxy=replace. The SIP RFC say that a maddr URL tag overrides the host part of the url (at least for the Via header). However when a UA uses this contact to send an ACK or BYE back to the WM5 UA , OpenSER does seem to be able to route it to xxx.xxx.152.57. If fact Openser pops the route header off (which contains the IP for the proxy) into the RURI and the response goes nowhere. (See attached trace) When I rewrite the contact in the config file but put the following code in route[0]: if (method=="INVITE") { if (search("^Contact:.*;maddr=")) { # find the host name and replace it withj the maddr tag if (!subst("/^Contact:(.*)sip:([^@]+)@([a-zA-Z0-9.]+)(.*);maddr=([0-9.]+)(.*)/Contact:\1sip:\2@\5\4;maddr=\5\6/i")) { xlog("L_NOTICE", "route[0]: ERROR rewriting maddr contact $hdr(contact[0])\n"); } else { xlog("L_NOTICE", "route[0]: Rewrote maddr contact $hdr(contact[0])\n"); } } } and the following in onreply_route[1]: if (status=="200") { if (search("^Contact:.*;maddr=")) { # find the host name and replace it withj the maddr tag if (!subst("/^Contact:(.*)sip:([^@]+)@([a-zA-Z0-9.]+)(.*);maddr=([0-9.]+)(.*)/Contact:\1sip:\2@\5\4;maddr=\5\6/i")) { xlog("L_NOTICE", "onreply_route[1]: ERROR rewriting maddr contact $hdr(contact[0])\n"); } else { xlog("L_NOTICE", "onreply_route[1]: Rewrote maddr contact $hdr(contact[0])\n"); } } } the calls proceed and terminate correctly in both directions. The question then arises should OpenSER handle maddr URL tags in the RURI PS. Does anyone know what the proxy=replace header tag means? -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 | # T XXX.XXX.152.78:1399 -> XXX.XXX.2.40:5060 [AP] INVITE sip:userwm5@domain.net SIP/2.0. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-9808374cf435475c-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: <sip:userwm5@domain.net>. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Content-Type: application/sdp. Supported: eventlist. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 619. . v=0. o=- 5401759 5401834 IN IP4 XXX.XXX.152.78. s=CounterPath eyeBeam. c=IN IP4 XXX.XXX.152.78. t=0 0. m=audio 8972 RTP/AVP 8 0 100 6 3 18 98 97 5 102 101. a=alt:1 1 : 09A01121 0000002D XXX.XXX.152.78 8972. a=fmtp:101 0-15. a=rtpmap:100 speex/16000. a=rtpmap:98 ilbc/8000. a=rtpmap:97 speex/8000. a=rtpmap:102 l16/16000. a=rtpmap:101 telephone-event/8000. a=sendrecv. m=video 8974 RTP/AVP 103 105 34 120. a=alt:1 1 : F4D11C0A 000000FA XXX.XXX.152.78 8974. a=fmtp:105 profile=3;level=20. a=fmtp:34 CIF=2 QCIF=2 MAXBR=5120. a=rtpmap:103 h263-1998/90000. a=rtpmap:105 h263-2000/90000. a=rtpmap:120 h263/90000. a=sendrecv. # T XXX.XXX.2.40:5060 -> XXX.XXX.152.78:1399 [AP] SIP/2.0 407 Proxy Authentication Required. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-9808374cf435475c-1--d87543-;rport=1399. To: <sip:userwm5@domain.net>;tag=88cbe004b15faf54e2a8ed57b9c4eaaa.ce87. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 INVITE. Proxy-Authenticate: Digest realm="domain.net", nonce="440b877a9197230dccf837b9adb629fd8ebf8115". Server: OpenSer (1.0.1-tls (i386/linux)). Content-Length: 0. Warning: 392 XXX.XXX.2.40:5060 "Noisy feedback tells: pid=4962 req_src_ip=XXX.XXX.152.78 req_src_port=1399 in_uri=sip:userwm5@domain.net out_uri=sip:userwm5@domain.net via_cnt==1". . # T XXX.XXX.152.78:1399 -> XXX.XXX.2.40:5060 [AP] ACK sip:userwm5@domain.net SIP/2.0. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-9808374cf435475c-1--d87543-;rport. To: <sip:userwm5@domain.net>;tag=88cbe004b15faf54e2a8ed57b9c4eaaa.ce87. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 ACK. Content-Length: 0. . # T XXX.XXX.152.78:1399 -> XXX.XXX.2.40:5060 [A] INVITE sip:userwm5@domain.net SIP/2.0. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: <sip:userwm5@domain.net>. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Content-Type: application/sdp. Proxy-Authorization: Digest username="usereb",realm="domain.net",nonce="440b877a9197230dccf837b9adb629fd8ebf8115",uri="sip:userwm5@domain.net",response="4b8c1425b2edd0c05302ec708a793316",algorithm=MD5. Supported: eventlist. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 619. . v=0. o=- 5401759 5401834 IN IP4 XXX.XXX.152.78. s=CounterPath eyeBeam. c=IN IP4 XXX.XXX.152.78. t=0 0. m=audio 8972 RTP/AVP 8 0 100 6 3 18 98 97 5 102 101. a=alt:1 1 : 09A01121 0000002D XXX.XXX.152.78 8972. a=fmtp:101 0-15. a=rtpmap:100 speex/16000. a=rtpmap:98 ilbc/8000. a=rtpmap:97 speex/8000. a=rtpmap:102 l16/16000. a=rtpmap:101 telephone-event/8000. a=sendrecv. m=video 8974 RTP/AVP 103 105 34 120. a=alt:1 1 : F4D11C0A 000000FA XXX.XXX.152.78 8974. a=fmt # T XXX.XXX.152.78:1399 -> XXX.XXX.2.40:5060 [AP] p:105 profile=3;level=20. a=fmtp:34 CIF=2 QCIF=2 MAXBR=5120. a=rtpmap:103 h263-1998/90000. a=rtpmap:105 h263-2000/90000. a=rtpmap:120 h263/90000. a=sendrecv. # T XXX.XXX.2.40:5060 -> XXX.XXX.152.78:1399 [AP] SIP/2.0 100 trying -- your call is important to us. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. To: <sip:userwm5@domain.net>. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Server: OpenSer (1.0.1-tls (i386/linux)). Content-Length: 0. Warning: 392 XXX.XXX.2.40:5060 "Noisy feedback tells: pid=4962 req_src_ip=XXX.XXX.152.78 req_src_port=1399 in_uri=sip:userwm5@domain.net out_uri=sip:YYY.YYY.152.57:5060;transport=tcp via_cnt==1". . # T XXX.XXX.2.40:42734 -> YYY.YYY.152.57:5060 [AP] INVITE sip:YYY.YYY.152.57:5060;transport=tcp SIP/2.0. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp>. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bK95f.22e73805.0;i=535. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. Max-Forwards: 69. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: <sip:userwm5@domain.net>. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. Content-Type: application/sdp. Supported: eventlist. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 619. . v=0. o=- 5401759 5401834 IN IP4 XXX.XXX.152.78. s=CounterPath eyeBeam. c=IN IP4 XXX.XXX.2.40. t=0 0. m=audio 35796 RTP/AVP 8 0 100 6 3 18 98 97 5 102 101. a=alt:1 1 : 09A01121 0000002D XXX.XXX.152.78 8972. a=fmtp:101 0-15. a=rtpmap:100 speex/16000. a=rtpmap:98 ilbc/8000. a=rtpmap:97 speex/8000. a=rtpmap:102 l16/16000. a=rtpmap:101 telephone-event/8000. a=sendrecv. m=video 35798 RTP/AVP 103 105 34 120. a=alt:1 1 : F4D11C0A 000000FA XXX.XXX.152.78 8974. a=fmtp:105 profile=3;level=20. a=fmtp:34 CIF=2 QCIF=2 MAXBR=5120. a=rtpmap:103 h263-1998/90000. a=rtpmap:105 h263-2000/90000. a=rtpmap:120 h263/90000. a=sendrecv. # T YYY.YYY.152.57:5060 -> XXX.XXX.2.40:42734 [AP] SIP/2.0 100 Trying. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bK95f.22e73805.0;i=535. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. User-Agent: RTC/1.3. Content-Length: 0. . # T YYY.YYY.152.57:5060 -> XXX.XXX.2.40:42734 [AP] SIP/2.0 180 Ringing. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bK95f.22e73805.0;i=535. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp>. User-Agent: RTC/1.3. Content-Length: 0. . # T XXX.XXX.2.40:5060 -> XXX.XXX.152.78:1399 [AP] SIP/2.0 180 Ringing. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp>. User-Agent: RTC/1.3. Content-Length: 0. . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # T YYY.YYY.152.57:5060 -> XXX.XXX.2.40:42734 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bK95f.22e73805.0;i=535. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp>. Contact: <sip:userwm5@domain.net:5060;maddr=YYY.YYY.152.57;transport=tcp>;proxy=replace. User-Agent: RTC/1.3. Content-Type: application/sdp. Content-Length: 390. . v=0. o=- 0 0 IN IP4 YYY.YYY.152.57. s=CounterPath eyeBeam. c=IN IP4 YYY.YYY.152.57. b=CT:1000. t=0 0. m=audio 5350 RTP/AVP 8 0 6 3 5 101. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:6 DVI4/16000. a=rtpmap:3 GSM/8000. a=rtpmap:5 DVI4/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. m=video 5352 RTP/AVP 34 120. a=recvonly. a=rtpmap:34 H263/90000. a=rtpmap:120 h263/90000. # T XXX.XXX.2.40:5060 -> XXX.XXX.152.78:1399 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-dd728d06512ec00b-1--d87543-;rport=1399. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 INVITE. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp>. Contact: <sip:userwm5@domain.net:5060;maddr=YYY.YYY.152.57;transport=tcp>;proxy=replace. User-Agent: RTC/1.3. Content-Type: application/sdp. Content-Length: 390. . v=0. o=- 0 0 IN IP4 YYY.YYY.152.57. s=CounterPath eyeBeam. c=IN IP4 XXX.XXX.2.40. b=CT:1000. t=0 0. m=audio 35796 RTP/AVP 8 0 6 3 5 101. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:6 DVI4/16000. a=rtpmap:3 GSM/8000. a=rtpmap:5 DVI4/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. m=video 35798 RTP/AVP 34 120. a=recvonly. a=rtpmap:34 H263/90000. a=rtpmap:120 h263/90000. # T XXX.XXX.152.78:1399 -> XXX.XXX.2.40:5060 [AP] ACK sip:userwm5@domain.net:5060;maddr=YYY.YYY.152.57;transport=tcp SIP/2.0. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-e063223a7b420f71-1--d87543-;rport. Max-Forwards: 70. Route: <sip:XXX.XXX.2.40;transport=tcp;lr;ftag=d37fe766;mproxy=yes;invite=tcp>. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 ACK. Proxy-Authorization: Digest username="usereb",realm="domain.net",nonce="440b877a9197230dccf837b9adb629fd8ebf8115",uri="sip:userwm5@domain.net",response="4b8c1425b2edd0c05302ec708a793316",algorithm=MD5. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 0. . # T XXX.XXX.2.40:42736 -> XXX.XXX.2.40:5060 [AP] ACK sip:XXX.XXX.2.40;transport=tcp;lr;ftag=d37fe766;mproxy=yes;invite=tcp SIP/2.0. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on>. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=0;i=535. Via: SIP/2.0/TCP XXX.XXX.152.78:5060;branch=z9hG4bK-d87543-e063223a7b420f71-1--d87543-;rport=1399. Max-Forwards: 69. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. From: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 2 ACK. Proxy-Authorization: Digest username="usereb",realm="domain.net",nonce="440b877a9197230dccf837b9adb629fd8ebf8115",uri="sip:userwm5@domain.net",response="4b8c1425b2edd0c05302ec708a793316",algorithm=MD5. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 0. . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.2.40:5060 -> XXX.XXX.153.42:8664 .... # U XXX.XXX.2.40:5060 -> 138.217.188.239:19110 .... # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # T YYY.YYY.152.57:2544 -> XXX.XXX.2.40:5060 [AP] BYE sip:XXX.XXX.2.40;transport=tcp;ftag=d37fe766;lr=on;mproxy=yes;invite=tcp SIP/2.0. Via: SIP/2.0/TCP YYY.YYY.152.57:5060. Max-Forwards: 70. From: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. To: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 BYE. Route: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. User-Agent: RTC/1.3. Content-Length: 0. . # T XXX.XXX.2.40:42737 -> XXX.XXX.152.78:5060 [AP] BYE sip:usereb@XXX.XXX.152.78:5060;transport=TCP SIP/2.0. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;ftag=0e106f3ac62449d0bc454368719020a8;lr=on>. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bKc5f.77604c67.0;i=435. Via: SIP/2.0/TCP YYY.YYY.152.57:5060. Max-Forwards: 69. From: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. To: "usereb"<sip:usereb@domain.net>;tag=d37fe766. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 BYE. User-Agent: RTC/1.3. Content-Length: 0. . # T XXX.XXX.152.78:1400 -> XXX.XXX.2.40:5060 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP XXX.XXX.2.40;branch=z9hG4bKc5f.77604c67.0;i=435. Via: SIP/2.0/TCP YYY.YYY.152.57:5060. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;lr;ftag=0e106f3ac62449d0bc454368719020a8>. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: "usereb"<sip:usereb@domain.net>;tag=d37fe766. From: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 BYE. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 0. . # T XXX.XXX.2.40:5060 -> YYY.YYY.152.57:2544 [AP] SIP/2.0 200 OK. Via: SIP/2.0/TCP YYY.YYY.152.57:5060. Record-Route: <sip:XXX.XXX.2.40;transport=tcp;lr;ftag=0e106f3ac62449d0bc454368719020a8>. Contact: <sip:usereb@XXX.XXX.152.78:5060;transport=TCP>. To: "usereb"<sip:usereb@domain.net>;tag=d37fe766. From: <sip:userwm5@domain.net>;tag=0e106f3ac62449d0bc454368719020a8. Call-ID: 6f309543f11f7056@c3RnLWRlbGw.. CSeq: 1 BYE. User-Agent: CounterPath eyeBeam release 3013o stamp 23916. Content-Length: 0. . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . # U XXX.XXX.2.40:5060 -> XXX.XXX.153.42:8664 .... # U XXX.XXX.2.40:5060 -> 138.217.188.239:19110 .... # U XXX.XXX.153.42:8664 -> XXX.XXX.2.40:5060 . exit

2 3

RE: [Serusers] SER + Asterisk; BYE gets 404
by Bart J. Smit 08 Mar '06

08 Mar '06

Hi Rodney, The entire conversation is in UDP. I've attached the SIP packets from the ethereal trace. Bart... -----Original Message----- From: Dr. Rodney G. McDuff [mailto:mcduff@its.uq.edu.au] Sent: 07 March 2006 23:38 To: Bart J. Smit; serusers(a)lists.iptel.org Subject: Re: [Serusers] SER + Asterisk; BYE gets 404 Hi Bart Have you got the SER box doing any (TCP/UDP) protocol conversion. Ie is your phone using TCP (as * only does UDP). Bart J. Smit wrote: > I am running ser 0.9.6 on CentOS 4.2 with asterisk on the same box > listening on 5065. > > When I register a phone with ser, I can call XXXX(a)pbx.nexusmgmt.com and > these calls are forwarded to the asterisk on a forward(<external > IP>,5065). I've attached my full routing block below. > > After hanging up from either phone, the BYE packet never gets delivered. > It shows up in ethereal as being addressed to the external IP address of > the box and it gets a 404 in reply. > > When I register a phone directly with the Asterisk, I can hang up from > either end as normal, so the issue must be with ser. > > Any hints on how I can route the BYE packets correctly? > > Thanks, > > Bart... > > > route { > > # > ----------------------------------------------------------------- > # Sanity Check Section > # > ----------------------------------------------------------------- > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483", "Too Many Hops"); > break; > }; > > if (msg:len > max_len) { > sl_send_reply("513", "Message Overflow"); > break; > }; > # > ----------------------------------------------------------------- > # Record Route Section > # > ----------------------------------------------------------------- > if (method!="REGISTER") { > record_route(); > }; > > # > ----------------------------------------------------------------- > # Loose Route Section > # > ----------------------------------------------------------------- > if (loose_route()) { > t_relay(); > break; > }; > > # > ----------------------------------------------------------------- > # Call Type Processing Section > # > ----------------------------------------------------------------- > if (uri=~"sip:[0-9]{4}@pbx\.nexusmgmt\.com") { > forward(65.126.236.148,5065); > break; > }; > if (uri!=myself) { > route(1); > break; > }; > > if (method=="CANCEL") { > route(1); > break; > } else if (method=="INVITE") { > route(3); > break; > } else if (method=="REGISTER") { > route(2); > break; > }; > > lookup("aliases"); > if (uri!=myself) { > route(1); > break; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > break; > }; > > route(1); > } > > route[1] { > > # > ----------------------------------------------------------------- > # Default Message Handler > # > ----------------------------------------------------------------- > > t_on_reply("1"); > > if (!t_relay()) { > sl_reply_error(); > }; > } > > route[2] { > > # > ----------------------------------------------------------------- > # REGISTER Message Handler > # > ---------------------------------------------------------------- > > sl_send_reply("100", "Trying"); > > if (!www_authorize("","subscriber")) { > www_challenge("","0"); > break; > }; > > if (!check_to()) { > sl_send_reply("401", "Unauthorized"); > break; > }; > > consume_credentials(); > > if (!save("location")) { > sl_reply_error(); > }; > } > > route[3] { > > # > ----------------------------------------------------------------- > # INVITE Message Handler > # > ----------------------------------------------------------------- > > if (!proxy_authorize("","subscriber")) { > proxy_challenge("","0"); > log(1,"authenticate please\n"); > break; > } else if (!check_from()) { > sl_send_reply("403", "Use From=ID"); > break; > }; > > lookup("aliases"); > if (uri!=myself) { > route(1); > break; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > break; > }; > > route(1); > } > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

1 0

[Users] NEW functionalities in Nathelper
by Bogdan-Andrei Iancu 08 Mar '06

08 Mar '06

Hi, based on the latest requests/patches from several users, some functions from nathelper module got their functionality upgraded: - fix_nated_sdp() may take one more parameter to force a specific IP instead of the signalling IP. See discussion thread http://www.openser.org/pipermail/devel/2006-February/002078.html Ex: fix_nated_sdp("2","192.168.2.100"); Pseudo-variables are also supported in the IP definition. - force_rtp_proxy() accepts a new flag 's' to swap the creation/confirmation of RTP session between requests and replies (this is needed to be able to cope with SDPs advertised via 200OK / ACK) See discussion thread http://www.openser.org/pipermail/devel/2006-February/002042.html Ex: force_rtp_proxy("s"); - add_rcv_param() may take as parameter a flag telling if the parameter should go to the contact URI or contact header; make sense if you forward REGISTER requests and need the registrar to save the parameter as part of URI. See Discussion thread http://www.openser.org/pipermail/devel/2006-February/002103.html Ex: add_rcv_param("1"); # add it as URI param on line docs were also updated. regards, bogdan

1 0

Re: [Serusers] Presence Agent
by Vaclav Kubart 08 Mar '06

08 Mar '06

Hi, presence agent (PA module in ser) handles SUBSCRIBE requests and generates NOTIFY. But according your description it seems that you don't use PA module, thus SUBSCRIBE requests are only redirected. In default configuration is PA module not present, I think. You can try to read presence handbook about SER presence modules (ftp://ftp.iptel.org/pub/ser/presence/presence_book.xhtml). It is a bit outdated but not too much. Vaclav On Tue, Mar 07, 2006 at 10:01:47PM -0300, Gustavo Moreira wrote: > I have installed my SER on a Debian Sarge. > > I'm trying it with the Windows Messenger and it works fine, but sometimes, > the clients don't see each other. For example, if I'm connected and another > user sign in, I can see his status (available) but he see me offline. If I > relogon we can see each other normally. > > I think this is not the normal behaviour, isn't it? > > My doubt is: The presence agent manage the presence off all users or just > redirect the SUSCRIBE or NOTIFY messages?? > > Thanks!!!! > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Presence Agent
by Gustavo Moreira 08 Mar '06

08 Mar '06

I have installed my SER on a Debian Sarge. I'm trying it with the Windows Messenger and it works fine, but sometimes, the clients don't see each other. For example, if I'm connected and another user sign in, I can see his status (available) but he see me offline. If I relogon we can see each other normally. I think this is not the normal behaviour, isn't it? My doubt is: The presence agent manage the presence off all users or just redirect the SUSCRIBE or NOTIFY messages?? Thanks!!!!

1 0

[Serusers] SER + Asterisk; BYE gets 404
by Bart J. Smit 07 Mar '06

07 Mar '06

I am running ser 0.9.6 on CentOS 4.2 with asterisk on the same box listening on 5065. When I register a phone with ser, I can call XXXX(a)pbx.nexusmgmt.com and these calls are forwarded to the asterisk on a forward(<external IP>,5065). I've attached my full routing block below. After hanging up from either phone, the BYE packet never gets delivered. It shows up in ethereal as being addressed to the external IP address of the box and it gets a 404 in reply. When I register a phone directly with the Asterisk, I can hang up from either end as normal, so the issue must be with ser. Any hints on how I can route the BYE packets correctly? Thanks, Bart... route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { t_relay(); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri=~"sip:[0-9]{4}@pbx\.nexusmgmt\.com") { forward(65.126.236.148,5065); break; }; if (uri!=myself) { route(1); break; }; if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); log(1,"authenticate please\n"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); }

2 1

[Serusers] MWI, SER and asterisk
by Sharon 07 Mar '06

07 Mar '06

I have my peers registered to SER.asterisk seems to be sending mwi for the peers seen in the sip show peers CLI command. i have my ser server registered with asterisk as a type=friend and all clients register to ser.how do i get mwi to work for these clients registered to SER. Thank you, -AA

1 0

[Serusers] Received Accounting-Request packet from 127.0.0.1 with invalid signature!
by e ansah 07 Mar '06

07 Mar '06

Hello All, I really need you help, as I'm a virgin SER user. I'm trying to setup radius accounting with SER and I'm getting the following error: Received Accounting-Request packet from 127.0.0.1 with invalid signature! (Shared secret is incorrect.) I've been able to setup radiusclient-ng to log accounting requests to Freeradius installed on the same server. When I do the following, Freeradius logs accounting requests: radclient -f digest localhost acct testing123 However, when I try to get SER to log radius accounting, providing the "acc" module the same client's configuration file, I get the error in Freeradius: Received Accounting-Request packet from 127.0.0.1 with invalid signature! (Shared secret is incorrect.) Is there a way to log the password module acc retrieves from radiusclient-ng? I'm really at a loss. Here's output from calling radiusd: ================================= Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib64" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib64 Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded DIGEST Module: Instantiated digest (digest) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Initializing the thread pool... thread: start_servers = 5 thread: max_servers = 32 thread: min_spare_servers = 3 thread: max_spare_servers = 10 thread: max_requests_per_server = 0 thread: cleanup_delay = 5 Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread 2 waiting to be assigned a request Thread 1 waiting to be assigned a request Thread spawned new child 3. Total threads in pool: 3 Thread 3 waiting to be assigned a request Thread spawned new child 4. Total threads in pool: 4 Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. Thread 4 waiting to be assigned a request Thread 5 waiting to be assigned a request Here are also snippets from ser.cfg ============================= modparam("auth_db|permissions|uri_db|usrloc", "db_url", "mysql://ser:mypass@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") # -- acc params for radius-- modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # mark all transactions for accounting setflag(1); [...] Thanks in advance! _________________________________________________________________ Dont just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/

1 0

[Users] Using a table other that subscriber for authentication
by Script Head 07 Mar '06

07 Mar '06

I have a solid setup of OpenSER and PostgreSQL. My route in question looks like this if(method=="REGISTER") { if (!www_authorize("domain", "subscriber")) { www_challenge("domain", "0"); return; }; save("location"); return; } I would like to use a view called subscriber_active instead of table subscriber. It's a view that returns a result set identical to SELECT * FROM subscriber. I also did INSERT INTO version(table_name,table_version) VALUES('subscriber_active',1). When I replace the subscriber with subscriber_active in the above route, I get 0(0) auth_db:str_fixup: Invalid table version (use ser_mysql.sh reinstall) 0(0) ERROR: fix_expr : fix_actions error ERROR: error -1 while trying to fix configuration so can someone explain what the table version is supposed to be?

2 3

[Users] Daemons and killing processes...
by Helge Waastad 07 Mar '06

07 Mar '06

Hi, I'm running cvs on a centos installation but having problems killing all childrens. I'm using basic init scripts (redhat) It seems that two or more are in R state and needs to be killed by -9... Any hints are appreciated :-) br hw

4 5

[Users] ser with radius group checking - something amiss
by Velimir Novkovic 07 Mar '06

07 Mar '06

Hi, I run SER with Radius/MySQL for authentication and accounting. Things are pretty much in place except for group checking. I have something like this in my ser.cfg: .... modparam("auth_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") modparam("group_radius", "use_domain", 1) ..... if (uri=~"^sip:[0-9]{8}@") { # Domestic PSTN if (!radius_is_user_in("credentials", "ld")) { sl_send_reply("403", "No permission for domestic calls"); return; }; route(4); return; }; .... When I look at Radius debug log I can see that when ser sends a request to radius, radius wants to do digest on it and then the complete request fails and call can't go through. Output looks something like this: .. rad_recv: Access-Request packet from host 127.0.0.1:34027, id=18, length=72 User-Name = "81000(a)sage.home.local" Sip-Group = "voicemail" Service-Type = Group-Check NAS-Port = 0 NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf .. ** bunch of sql statements ... .. modcall: group authorize returns ok for request 17 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 17 ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid for request 17 modcall: group authenticate returns invalid for request 17 auth: Failed to validate the user. In databases I have following: mysql> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '81000(a)sage.home.local' ORDER BY id; +----+-----------------------+--------------+-------------+----+ | id | UserName | Attribute | Value | op | +----+-----------------------+--------------+-------------+----+ | 18 | 81000(a)sage.home.local | Service-Type | Group-Check | := | +----+-----------------------+--------------+-------------+----+ 1 row in set (0.00 sec) mysql> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '81000(a)sage.home.local' ORDER BY id; +----+-----------------------+---------------+------------------------------ ------+----+ | id | UserName | Attribute | Value | op | +----+-----------------------+---------------+------------------------------ ------+----+ | 23 | 81000(a)sage.home.local | User-Password | $1$d7XAeahG$9f17cb8JaKj8R1z9GpwG4/ | := | | 25 | 81000(a)sage.home.local | Sip-Rpid | 81000 | = | | 30 | 81000(a)sage.home.local | Auth-Type | Digest | := | +----+-----------------------+---------------+------------------------------ ------+----+ mysql> SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FR OM radgroupcheck,usergroup WHERE usergroup.Username = '81000(a)sage.home.local' AND usergroup.GroupName = radgroupcheck.G roupName ORDER BY radgroupcheck.id; +----+-----------+-----------+--------+----+ | id | GroupName | Attribute | Value | op | +----+-----------+-----------+--------+----+ | 12 | voicemail | Auth-Type | Accept | := | +----+-----------+-----------+--------+----+ Has anyone had a chance to do something like this with success? I am stuck at the moment - any help is greatly appreciated. Thanks. /Vel

2 2

[Users] Path and ds_mark_dst
by Helge Waastad 07 Mar '06

07 Mar '06

Hi, I am just wondering how to reset the inactive proxy after a ds_mark_dst() has been made, and the box is up and running again.. I know a restart of the dispatcher works, but would it be interesting to have this functionality through openserctl?? And in addition to this, I guess the dispatcher.list could be exchanged to some kind of av_db_load??? -- Helge Waastad Senior Konsulent Systemavdelingen Smartnet

2 1

[Serusers] SIP extensions
by Jenny Paul 07 Mar '06

07 Mar '06

Hi Can somebody please tell me whether SER supports any SIP extensions? Thank You Jenny

1 0

[Users] Migrating data from a SER 0.9.14 til OpenSER 1.0.0, with MySQL
by Martin Kjeldsen 07 Mar '06

07 Mar '06

Hi everybody I have an old SER 0.9.14, and I would like to move the data from MySQL to a MySQL DB with a OpenSER 1.0.0, and I was wondering if anybody had some good advice or experience with solving this little problem? All advice will be greatly appreciated. Kind regards Martin Kjeldsen

2 2

[Serusers] When to use 'serctl fifo ..'
by nick.hoffman＠altcall.com 07 Mar '06

07 Mar '06

Hi guys, I'm trying to wrap my head around the usage of SER's FIFO. I've read up on the FIFO and available FIFO commands, but I really don't understand when or why you would want to run serctl fifo <command> or write directly to /tmp/ser_fifo rather than just run serctl <command> I haven't found anything in the docs and guides that specifically touches on when to use each, so if anyone would be kind enough to enlighten me, I'd really appreciate it. Thanks! Nick ---------------------------------------------------------------- If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it.

1 0

[Users] Install 1.0.1 - New MySql DB Required?
by Douglas Garstang 07 Mar '06

07 Mar '06

I've upgraded to OpenSER v1.0.1 from 1.0.0.... Do I need to recreate or do anything special to the MySQL database structure, or can it remain as it is? Thanks, Doug

2 1

[Users] Capacity management and call numbler limitation per gateway
by Florian Fainelli 07 Mar '06

07 Mar '06

Hello all ! I would like to know if it is possible to manage remote gateways capacity, for instance, I want to send only 30 calls to a given gateway, and then forward the others to the next one. I think I can handle some messages with the sl module, but I am not sure how I should do that. Thank you very much in advance for your answer. -- Cordialement, Florian Fainelli --------------------------------------- 5, rue Charles Fourier Chambre 1511 91011 Evry http://www.alphacore.net (+33) 01 60 76 64 86 (+33) 06 09 02 64 95 ---------------------------------------- Institut National des Télécomnications http://www.int-evry.fr/telecomint ----------------------------------------

2 1

[Users] MySQL Database Connectivity
by Douglas Garstang 06 Mar '06

06 Mar '06

Serious problem here... My openser.conf is configured to work with mysql. If I shut the mysql database down for even a few seconds, and restart it, OpenSER fails to reconnect. It is logging this via syslog: Mar 6 13:23:13 apollo openser[16096]: submit_query: MySQL server has gone away Mar 6 13:23:13 apollo openser[16096]: db_query: Error while submitting query Mar 6 13:23:13 apollo openser[16096]: get_ha1(): Error while querying database This seems like a pretty critical bug. Is it a known bug? Openser v1.0.0 Doug.

2 1

RE: [Serusers] cdrs?
by Vitaly Nikolaev 06 Mar '06

06 Mar '06

You can restart ser, call will not be interrupted, but if u kill rtpproxy, there will be no audio and customer will most likely hung-up But if you stop ser in the middle of conversation and then turn it on back it will record cdrs, the only stop record (bye records) you going to loose is that came during ser was down. I want to urge you though, if two customers during the conversation both switch off their sip clients, you will not get stop cdr (bye) in database. For you it will be forever hanging call. If you will have customers with broken sip client you might never get bye or get multiple byes for on session. What I wanna say that idea with getting cdrs from SER is not for commercial use, just for information because it is not reliable, then only good way to collect cdrs is to collect them from termination GW or by using b2bua :-) ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of roger leszczynski Sent: Monday, March 06, 2006 10:12 AM To: serusers(a)lists.iptel.org Subject: [Serusers] cdrs? does anyone have example files to track cdrs in flat file and mysql database? im also wondering what happens iof i restart ser while 100 concurrent calls are occuring, and they are still going through rtpproxy, will the acc module keep tracking those cdrs?

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users