- sr-users - kamailio.org

[Serusers] problems with digest
by Lucas Aimaretto 09 May '05

09 May '05

Hi all, I'm having trouble at authentication using radius and digest. Look at radius output. The rare thing is that some phones get registered nicely, but others no. The ones who get registered are X-Lite softphones and grandstream. The ones that not, are the ATAs from voip solutions, MTA-V102. Any help would be appreciated. The user is 1991106 and has NO PASSWORD assigned ... ( but all of the users have NO PASSWORD ). rad_recv: Access-Request packet from host IP_SER:33483, id=196, length=269 User-Name = "1991106@IP_SER" Digest-Attributes = 0x0a0931393931313036 Digest-Attributes = 0x01103230382e3232312e3136392e3838 Digest-Attributes = 0x022a343237666563656136633030666366653433376234396139363436643036663733 63396635353639 Digest-Attributes = 0x04147369703a3230382e3232312e3136392e3838 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "9b256af89daa817caf568f682e1d15a6" Service-Type = IAPP-Register X-Ascend-PW-Lifetime = 0x31393931313036 Cisco-AVPair = "call-id=efbfcb25db042b56d47ddbe74e640d8f(a)10.0.0.5" NAS-IP-Address = IP_SER NAS-Port = 5060 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 213 modcall[authorize]: module "preprocess" returns ok for request 213 modcall[authorize]: module "attr_filter" returns noop for request 213 modcall[authorize]: module "chap" returns noop for request 213 rlm_digest: Converting Digest-Attributes to something sane... Digest-User-Name = "1991106" Digest-Realm = "IP_SER" Digest-Nonce = "427fecea6c00fcfe437b49a9646d06f73c9f5569" Digest-URI = "sip:IP_SER" Digest-Method = "REGISTER" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 213 rlm_realm: Looking up realm "IP_SER" for User-Name = "1991106@IP_SER" rlm_realm: Found realm "IP_SER" rlm_realm: Adding Stripped-User-Name = "1991106" rlm_realm: Proxying request from user 1991106 to realm IP_SER rlm_realm: Adding Realm = "IP_SER" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 213 radius_xlat: '1991106' rlm_sql (sql): sql_set_user escaped user --> '1991106' radius_xlat: 'rad_authorize_check_query '1991106'' rlm_sql (sql): Reserving sql socket id: 1 radius_xlat: '' radius_xlat: 'rad_authorize_reply_query '1991106',''' radius_xlat: '' rlm_sql (sql): Released sql socket id: 1 modcall[authorize]: module "sql" returns ok for request 213 modcall: group authorize returns ok for request 213 rad_check_password: Found Auth-Type DIGEST auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 213 A1 = 1991106:IP_SER: A2 = REGISTER:sip:IP_SER KD = b3b6936f2a09f4749902ff9f6e0f1b71:427fecea6c00fcfe437b49a9646d06f73c9f556 9:1111962db7ab8b0547fc8fbaa6408dd6 rlm_digest: FAILED authentication modcall[authenticate]: module "digest" returns reject for request 213 modcall: group authenticate returns reject for request 213 auth: Failed to validate the user. Sending Access-Reject of id 196 to IP_SER:33483 ... any ideas ?? Look at this NGREP's ... U IP_UA:60975 -> IP_SER:5060 REGISTER sip:IP_SER SIP/2.0. Via: SIP/2.0/UDP 10.0.0.5:5070;branch=z9hG4bK2952116395. From: <sip:1991106@IP_SER>;tag=2375800474. To: <sip:1991106@IP_SER>. Call-ID: efbfcb25db042b56d47ddbe74e640d8f(a)10.0.0.5. CSeq: 15158 REGISTER. Contact: sip:1991106@10.0.0.5:5070. Expires: 120. Max-Forwards: 70. User-Agent: SIP-ICSG102-1.372-icablesystem/v2.0_enabled. Content-Length: 0. U IP_SER:5060 -> IP_UA:60975 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 10.0.0.5:5070;branch=z9hG4bK2952116395;rport=60975;received=64.32.92.159 . From: <sip:1991106@IP_SER>;tag=2375800474. To: <sip:1991106@IP_SER>;tag=6f0d146d94c4cb042663ff3cf87e2e72.527a. Call-ID: efbfcb25db042b56d47ddbe74e640d8f(a)10.0.0.5. CSeq: 15158 REGISTER. WWW-Authenticate: Digest realm="IP_SER", nonce="427feab914e565fceccccccf1852a2b0ae3b69cb". Content-Length: 0. Warning: 392 IP_SER:5060 "Noisy feedback tells: pid=5366 req_src_ip=IP_UA req_src_port=60975 in_uri=sip:IP_SER out_uri=sip:IP_SER via_cnt==1". U IP_UA:60975 -> IP_SER:5060 REGISTER sip:IP_SER SIP/2.0. Via: SIP/2.0/UDP 10.0.0.5:5070;branch=z9hG4bK2608934381. From: <sip:1991106@IP_SER>;tag=1079893788. To: <sip:1991106@IP_SER>. Call-ID: efbfcb25db042b56d47ddbe74e640d8f(a)10.0.0.5. CSeq: 15159 REGISTER. Contact: sip:1991106@10.0.0.5:5070. Expires: 120. Authorization: Digest username="1991106", realm="IP_SER", nonce="427feab914e565fceccccccf1852a2b0ae3b69cb", uri="sip:IP_SER", response="c7dc44af5d16f48c410813a7f4dc98f2". Max-Forwards: 70. User-Agent: SIP-ICSG102-1.372-icablesystem/v2.0_enabled. Content-Length: 0. U IP_SER:5060 -> IP_UA:60975 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 10.0.0.5:5070;branch=z9hG4bK2608934381;rport=60975;received=64.32.92.159 . From: <sip:1991106@IP_SER>;tag=1079893788. To: <sip:1991106@IP_SER>;tag=6f0d146d94c4cb042663ff3cf87e2e72.16e1. Call-ID: efbfcb25db042b56d47ddbe74e640d8f(a)10.0.0.5. CSeq: 15159 REGISTER. WWW-Authenticate: Digest realm="IP_SER", nonce="427feab914e565fceccccccf1852a2b0ae3b69cb". Content-Length: 0. Warning: 392 IP_SER:5060 "Noisy feedback tells: pid=5366 req_src_ip=IP_UA req_src_port=60975 in_uri=sip:IP_SER out_uri=sip:IP_SER via_cnt==1". So, you can see that the UA wants to register. Ser tells him to send nonce and digest data, but, once the UA resends the info, it gets an 401 Unauthorized message. I do not know why .... :( because it works with other phones ( xlite, grandstream ) ... Best Regards Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.5 - Release Date: 04/05/2005

1 0

[Serusers] rtpproxy
by harry gaillac 09 May '05

09 May '05

Hi all, We can read in CVS log for ser/rtpproxy/rtp_server.c Among major user-visible changes is addition of simple media-server functionality, which allows on-demand replacing one of RTP streams in session with one generated from local file. This will be used to introduce music-on-hold and similar functionality in nathelper later. Anybody could tell me more how to set up MOH server ? Regards __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

2 1

Re: [Serusers] pa module
by Jamey Hicks 09 May '05

09 May '05

harry gaillac wrote: >hello, > >Thanks for your reply. > >I try to understand drafts from : >http://www.ietf.org/html.charters/simple-charter.html > >I looked at >http://pals.internet2.edu/downloads/xcap/xcap-0.1.tar.gz > >however I don't find documentation at iptel.org in >order to answer to my problem: >Configuring Ser to handle ressource list with URI > > SER does not handle resource lists. However, the XCAP server will allow a UA to GET/PUT resource lists. Do you have a suggestion on how to form the URIs for resource lists? The only thing currently shared between PA and the XCAP server is watcherinfo. PA and XCAP exchange information through a table in the database. The XCAP server sends a FIFO command or a SIP message to PA to tell it to refresh the watcherinfo for a user. I imagine that a similar scheme could be used for resource lists. It might actually be easier, especially in the case of watcher lists, for PA to just fetch the xml and parse it rather than to force things into a database. This would make it easier for the XML schema to be extended. What do you think? Jamey

1 0

[Serusers] Ser and Firewall
by Alex 09 May '05

09 May '05

Hi SerUsers, I got in troble cause Since I installed SER behind e Firewall ; and I opened the port 5060 on the firewall but I' Can't register by my UAC !! my question is: Hhave I Open other ports then the 5060?? thanks in advance for your help!! Alex

1 0

[Serusers] pa module
by harry gaillac 09 May '05

09 May '05

Hello, We can read in README (pa module) 1.3.4. pa_domain (string) Hostname of xcap server associated with presence agent. Example 1-4. Set default_expires parameter ... modparam("pa", "pa_domain", "ser.example.com") ... Does ser is a XCAP server ? Regards Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

2 1

[Serusers] how to determine if a user is already authenticated or not ?
by St�phane Muller 09 May '05

09 May '05

Sorry for my stupid questions, I'm still a newbee in the VoiP domain ! I would like to allow only authenticated users to perform INVITE messages to special accounts. Form example : INVITE messages for "sip:conference@mydomain.com" must be authenticated. Another "stupid" question : where are stored those SETFLAG() functions ? Is it posible for example to SETFLAG() a user just after is it authenticated, and after that use ISFLAGSET() for a particular INVITE ?? Thank you very much guys ! -- Stéphane Muller -- SMuller(a)urbanet.ch le 08.05.2005 --

3 3

[Serusers] HELP... SER + Asterisk as feature server
by admin 09 May '05

09 May '05

Can anyone here help me understand what I missing with this setup. I want to use Asterisk as a feature server only, speaking only SIP (no IAX), and use SER for registration to minimize necessary bandwidth. SIP-phone <-->SER <--> * <--> PSTN Provider <--> Regular-phone Regular-phone <--> PSTN Provider <--> SER <--> * <--> SIP-phone I want to allow SIP users to transfer calls to other users, either on the system or on the PSTN. I'm not sure how to make this work with *. From what I understand, once a call is setup by SER the caller has no access to * because * is not in the media path. If so, * would not be able to catch the DTMF tones and transfer the call. Is this correct? Any help would be greatly appreciated!

1 0

[Serusers] SER + * on same BOX, behind NAT and doing NAT
by maka 09 May '05

09 May '05

hi all, I am currently working on the following: UAC1(10.10.10.15)---(10.10.10.1)SER+*(192.168.1.5)---(.1)DSL I can connect to the * from UAC1, can call PSTN through asterisk from UAC1, and SER is ok with registering and proxying SIP msgs between external (public IP) clients. I can't however get an external UAC to hear * echo test or call the PSTN through *. Any suggestions would be greatly appreciated, cheers;-)

1 0

[Serusers] how to overcome Echo problem ?
by Gorge 09 May '05

09 May '05

Dear All, I have just install my ser + midaproxy . while i testing i heard echo and its really annoying how to over come this problem ? I am using ser from onsip.org Gorge

1 0

RE: [serusers] ser.cfg
by Ricardo Martinez 09 May '05

09 May '05

Or you can try the tutorial from http://www.onsip.org Regards, Ricardo.- > -----Mensaje original----- > De: Matt Schulte [mailto:mschulte@netlogic.net] > Enviado el: Lunes, 09 de Mayo de 2005 9:33 > Para: michael p; serusers(a)lists.iptel.org > Asunto: RE: [serusers] ser.cfg > > > A little outdated but good nonetheless.. > > http://www.iptel.org/ser/admin.html > > -----Original Message----- > From: michael p [mailto:mikep3000@hotmail.com] > Sent: Monday, May 09, 2005 8:32 AM > To: serusers(a)lists.iptel.org > Subject: [serusers] ser.cfg > > > hi > > how can i learn about the configuration of "ser.cfg" ? > > i didn't find anything on the internet. > > and i don't succeed to understand how write the routes and the others > things... > > please answer me > > thanks > > M. > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

2 1

[Serusers] Help with AVPs
by Steve Blair 09 May '05

09 May '05

Hello: I'm trying to load a number from MySQL, check that number to insure it matches "appropriate" syntax then replace the username part of the RURI with this new string. I've tried several things without success. Does anyone have any suggestions on how this can be accomplished. I successfully load a numeric string (a telephone number) from the usr_preferences table. I'd like to check if this value is a five digit extension, eleven digit local number (preficed with a 9), or some other type of call. One approach I used follows. This fails with a syntax error. avp_write("^sip:[3468][0-9]{4}", "$callmatch"); if (avp_check("$calltype","re/$callmatch/g)) { avp_write("oncampus", "$calltype"); xlog("L_INFO", "\n[SER]: call type: ONCAMPUS \n"); }; I've also tried embedding the regular expression in the if construct without success. Any thoughts? Thanks,Steve -- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104 voice: 215-573-8396 215-746-8001 fax: 215-898-9348 sip:blairs@upenn.edu

1 0

RE: [Serusers] problem: chkconfig --add mediaproxy
by info＠beeplove.com 09 May '05

09 May '05

Never mind, I have found the answer. MOhammad Original Message: ----------------- From: info(a)beeplove.com info(a)beeplove.com Date: Mon, 9 May 2005 11:38:51 -0400 To: serusers(a)iptel.org Subject: [Serusers] problem: chkconfig --add mediaproxy Hello, Whenever I try, chkconfig --add mediaproxy I get, "service mediaproxy does not support chkconfig" I have put boot/mediaproxy.other (that came with source) file as /etc/rc.d/init.d/mediaproxy Can anybody help please. MOhammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

[Serusers] problem: chkconfig --add mediaproxy
by info＠beeplove.com 09 May '05

09 May '05

Hello, Whenever I try, chkconfig --add mediaproxy I get, "service mediaproxy does not support chkconfig" I have put boot/mediaproxy.other (that came with source) file as /etc/rc.d/init.d/mediaproxy Can anybody help please. MOhammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

[Serusers] UUID
by harry gaillac 09 May '05

09 May '05

Hello, Anybody Could tell me how can we set UUID ? Regards Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

[Serusers] gateway to gateway config
by Edgardo O. Gonzales II 09 May '05

09 May '05

hi! Can somebody help me with gateway to gateway confi so that I can make a call.. Setup is like this client <--> sip_gateway1 <--> internet <--> sip_gateway2 <--> client thanks, ed

1 0

[Serusers] no busy tone?
by Gerd Feiner 09 May '05

09 May '05

Hi, how do I get a busy tone when the callee is busy? (either way in- and outbound there is none at the moment). Brgds, Gerd

1 0

[Serusers] b2bua ser.cfg sample
by Olivier Taylor 09 May '05

09 May '05

Does anyone have an example of ser.cfg using b2bua. I use this scenario UA --->Ser--->B2bUa--->ua2 I I Radius Thx, Olivier

5 4

RE: [serusers] ser.cfg
by Matt Schulte 09 May '05

09 May '05

A little outdated but good nonetheless.. http://www.iptel.org/ser/admin.html -----Original Message----- From: michael p [mailto:mikep3000@hotmail.com] Sent: Monday, May 09, 2005 8:32 AM To: serusers(a)lists.iptel.org Subject: [serusers] ser.cfg hi how can i learn about the configuration of "ser.cfg" ? i didn't find anything on the internet. and i don't succeed to understand how write the routes and the others things... please answer me thanks M. _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] packet 8 , broadvoice test
by Iqbal 09 May '05

09 May '05

Hi Does anyone know if they port there numbers into a e164 exchange, if not, does anyone have an account from them, which they could post the number, so that I can call and test to see if it gets resolved, or just do a dns lookup on it Iqbal

1 0

[serusers] ser.cfg
by michael p 09 May '05

09 May '05

hi how can i learn about the configuration of "ser.cfg" ? i didn't find anything on the internet. and i don't succeed to understand how write the routes and the others things... please answer me thanks M.

1 0

[Serusers] Question about logical operators and isflagset
by Steve Blair 09 May '05

09 May '05

Hello: This should be easy but I cannot seem to get it working. I want to check if either flag is set to 1 but I consistently hit the else clause even though at least one flag is always 1. Any ideas will be appreciated. Thanks,Steve if ( isflagset(13) | isflagset(17) ) { ... } else { ... }; -- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104 voice: 215-573-8396 215-746-8001 fax: 215-898-9348 sip:blairs@upenn.edu

2 1

[Serusers] message waiting indicatrors, and voicemail
by Iqbal 09 May '05

09 May '05

Hi I have read a few posts (from Java) regarding MWI, has anyone beens successful with MWI and asterisk and ser combo. tks Iqbal

1 0

[Serusers] NAT & video eyebeam
by Giovanni Balasso 09 May '05

09 May '05

Hi serusers I have problem with NAT and eyebeam video streams. I have all my audio issues with nat fixed using onsip-like config files, audio sessions work as they should with no problems. But when I try to send video with eyebeam during an audio session, nothing happens. Actually eyebeam sends another INVITE, ser processes this INVITE in loose_route section by force_rtp_proxy("l"), and rtpproxy logs the request trying to use the same ports of audio stream. Does anybody knows if this is the point (ie. rtpproxy should open new ports for video stream)? How should I tell rtpproxy to use other ports? One stranger thing is that when I call someone inside the same NAT video works even forcing use of rtpproxy. Thanks for help ser.cfg sections: if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="NOTIFY")) { if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; if (method=="INVITE") { force_rtp_proxy("l"); }; }; t_on_reply("1"); t_relay(); break; }; } -- Giovanni Balasso giaso(a)yahoo.it

2 1

[Serusers] Logging timeouts
by Gorka Guridi 09 May '05

09 May '05

Hi all, If one of the participants in a conversation leaves it without send a BYE (unplugging the phone, etc. ), i can not log this success in mysql database. The conversation is successfully closed when SER gives a timeout error, but in this case does not appear any entry in "acc" table (appears only the "INVITE" and "ACK" entries). So, if i want to extract statistics from database, i can't know when this conversations finished. Any idea to do this? Thanks a lot. Best regards Gorka

1 0

[Serusers] new MediaProxy release 1.3.1
by Adrian Georgescu 09 May '05

09 May '05

Hello, There is a new MediaProxy release available. Changes from version 1.3.0 to 1.3.1 ----------------------------------- - Added a new option named 'start' for both the dispatcher and the media proxy server in the configuration file to specify which component to start. The option is specified in the component's section in mediaproxy.ini By default both the dispatcher and the media proxy server are started. - Renamed mediaproxy.ini to mediaproxy.ini.sample to avoid rewriting the configuration file on upgrades. For a first install the sample file should be renamed to mediaproxy.ini (see the INSTALL file) There is no change required for the SER module or SER configuration in ser.cfg. To upgrade go to http://mediaproxy.ag-projects.com/ or download the software directly from http://mediaproxy.ag-projects.com/mediaproxy-1.3.1.tar.gz Kind regards, Adrian Georgescu

1 0

[Serusers] Where the log file ?
by Gorge 09 May '05

09 May '05

Dear All, Sorry for this dump question, i m installing ser . when i m trying to test that ser from any UA. i didn't find any log to my /var/log/messages. i did try ser -D -E but now log. Gorge.

3 2

[Serusers] [ser-0.8.14] "100 Trying" and "408 Request Timeout"
by Star Bravo 09 May '05

09 May '05

Hi all, (I apologize in case my post is a redundant one) I am running ser-0.8.14 on a Public IP and trying to make an IP-to-IP call using Xten X-Lite softphones. [Call Scenario] One softphone is running on a Public IP while the other one is behind NAT running on a Private IP. [Problem] When caller softphone sends INVITE packet to SER, SER responds with "100 Trying" and finally after few seconds SER responds with "408 Request Timeout". The call does not connect, even the called party softphone (behind NAT) does not receive any SIP messages from SER. [Question] Why SER is not able to relay SIP messages to the called party softphones? [More Information] Call works fine if I initiate the call from the softphone that is behind NAT (using a Private IP) I am copying my ser.cfg file below. # ----------- global configuration parameters ------------------------ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; if(method=="INVITE") { record_route(); }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } Looking forward to your response and feedback. Thks & Rgds, - Bravo

1 0

RE: [serusers] registering
by michael p 09 May '05

09 May '05

thanks for the help now i didn't succeed to register i'm using xlite as UAC and it told me login failed when i'm testing to use user=admin, authorization user=admin, and password=heslo i know that's not come from the UAC cause i try on another one and it doesn't works i'm seeing on my database mysql, in the subscriber table, the name of admin with the password heslo. all the things works except the main thing the communications!!! do you know why? thanks very much M.

2 1

[Serusers] Micronet sp5014 cannot change proxy ip address
by Che Sosa 09 May '05

09 May '05

Anybody who uses Micronet sp5014 gateway? I can't change the proxy IP address? Any blue's clues? Thanks,

1 0

[Serusers] Email Check
by Davis Truong 09 May '05

09 May '05

I am having problem with my serweb , when adding a client through the Subscribe page, it wont send me email Please any clue?? Please help. I have sendmail, and everything installed, but the only thing that's not working is the subscribe email confirmation not sending to client.

1 0

[Serusers] double INVITE problem (newbie)
by Wojciech Ziniewicz 07 May '05

07 May '05

Hello serusers, In the latest post I did not my self clear. Here's my ser.cfg . I would like to get ONE INVITE to flag #2 but dont have any idea how to do it. I'm rather newbie to SER and please be patient :) Thank you in advance! main routing from my ser.cfg : [...] modparam("acc", "radius_config", "/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_flag", 2) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") # main routing logic route{ if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("domenet.pl", "subscriber")) { www_challenge("domenet.pl", "0"); break; }; save ("location"); sl_send_reply("200","Welcome user."); break; }; }; #if (method == "BYE" | method == "CANCEL") {end_media_session(); }; if (method=="INVITE" | method=="BYE" ) { setflag(2); }; if (!method=="REGISTER") { record_route();} if (loose_route()) { #if (method=="BYE" ) { #setflag(2); t_relay(); break; #}; }; if (uri=~"^sip:8@*" { if ( method=="INVITE" || method=="ACK"){ rewritehostport ("192.168.0.163:5060"); setflag(2); t_relay(); break; }; }; if (uri=~"^sip:1@*") { if (method=="INVITE" || method=="ACK"){ rewritehostport ("192.168.0.166:5060"); setflag(2); t_relay(); break; }; }; setflag(2); if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; lookup("aliases"); if (!t_relay()) { sl_reply_error(); log (1, "...local call"); }; } -- Pozdrawiam, Wojciech Ziniewicz Optocomp sp.z.o.o, www.optocomp.pl mailto: wojtekz(a)optocomp.pl +48(0)691031535

1 0

[Serusers] no inward calls from PSTN possible
by Gerd Feiner 07 May '05

07 May '05

Hi, (sorry for posting this to two different lists, but I think there maybe different considerations of this problem) I have an SER setup with mediaproxy and a Cisco AS5350. The SER/mediaproxy is setup following the guide at www.onsip.org. The AS5350 does just simple mediaconversion (so there are two dial-peers, one for PSTN and one for VOIP). These dialpeers worked fine with a less tightened SER-config, but always had the problem of not giving me any dialtone. Now, when I dial inwards from PSTN there is a very short dialtone which gets interrupted by silence. So far so good. But, when I pick up the SIP-phone I get an error-message on my PSTN-phone telling that the service was unavailable (yes - I payed my bill :--) and the SIP-phone gets disconnected. When debugging the AS5350 i noticed that is does net get an rport when dialing inwards: voip_rtp_create_session: callID=277, dstCallID=-1 laddr=195.234.128.23, lport=18114,raddr=0.0.0.0, rport=0, type=2, sig_tos=3, ip_tos=5 When the SIP-phone is picked up, the AS5350 gets a new information regarding the rport: May 7 15:39:28 195.234.128.23 57384: ^I State : STREAM_ADDING (2) May 7 15:39:28 195.234.128.23 57385: ^I Callid : 277 May 7 15:39:28 195.234.128.23 57386: ^I Negotiated Codec : g711alaw, bytes :160 May 7 15:39:28 195.234.128.23 57387: ^I Negotiated DTMF relay : inband-voice May 7 15:39:28 195.234.128.23 57388: ^I Negotiated NTE payload : 0 May 7 15:39:28 195.234.128.23 57389: ^I Negotiated CN payload : 0 May 7 15:39:28 195.234.128.23 57390: ^I Media Srce Addr/Port : 195.234.128.23:18114 May 7 15:39:28 195.234.128.23 57391: ^I Media Dest Addr/Port : 62.141.42.76:16032 but immediately after that the call gets disconnected. When dialing from SIP to PSTN everything seems fine with the rport: voip_rtp_create_session: callID=278, dstCallID=279 laddr=195.234.128.23, lport=17496,raddr=62.141.42.76, rport=16034, type=3, sig_tos=3, ip_tos=5 I also noticed that there is a difference in the type-value: 2 when dialing inwards and 3 when dialing outwards. Any ideas why this is happening? Brgds, Gerd

1 1

[Serusers] error while compile uac
by Mik 07 May '05

07 May '05

Hello, I try to compile UAC module for SER. And I have error. Please, give me advice. ser-0.8.14 extract uac-0.9.0-0.tgz to ser-0.8.14/modules/uac gmake RESULT: # gmake ../../Makefile.modules:21: "you should run make from the main ser directory" ../../Makefile.modules:21: "you should run make from the main ser directory" gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"uac.so"' -DVERSION='"0.8.14"' -DARCH='"i386"' -DOS='"freebsd"' -DCOMPILER='"gcc 3.4"' -D__CPU_i386 -D__OS_freebsd -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_SOCKADDR_SA_LEN -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSGHDR_MSG_CONTROL -c auth.c -o auth.o `-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead. auth.c: In function `uac_auth': auth.c:336: error: structure has no member named `t_gett' gmake: *** [auth.o] Ошибка 1 I can't find function with that name in all SER tree. # grep -R t_gett * modules/sms/sms_funcs.c: set_gettime_function(); modules/sms/sms_report.c:void set_gettime_function() modules/sms/sms_report.c: LOG(L_INFO,"INFO:sms:set_gettime_function: using system time func.\n"); modules/sms/sms_report.c: LOG(L_INFO,"INFO:sms:set_gettime_function: using ser time func.\n"); modules/sms/sms_report.h:void set_gettime_function(); Binary file modules/sms/sms_funcs.o matches Binary file modules/sms/sms_report.o matches Binary file modules/sms/sms.so matches modules/uac/auth.c: t = uac_tmb.t_gett(); # uname -a FreeBSD megalink.com.ru 5.3-RELEASE FreeBSD 5.3-RELEASE #1: Sun Nov 7 19:44:39 MSK 2004 dwl@megalink.com.ru:/usr/src/sys/i386/compile/megalink.com.ru-5.3 i386 How can I compile this module?

2 2

[Serusers] Possible bug in SER or Cisco GW?
by Francesco Bottà 07 May '05

07 May '05

Hi all, I'm observing a very strange behaviour....when I'm calling from PSTN through Cisco GW to my SER Proxy, if in my voip dial-peer there's the CLI command 'dtmf-relay rtp-nte', and then in the SDP line appears this 'a' line 'a=fmtp:101 0-16', when arrives to my SER, SER itself is unable to process it...below the ngrep dump, where the actors are: A.B.C.D: SER IP addr E.F.G.H: GW Cisco SIP signalling addr E.F.G.K: GW Cisco SIP media addr W.W.W.W: my SIP ATA addr U E.F.G.H:52007 -> A.B.C.D:5060 INVITE sip:0662293701@sip.mydomain.org:5060 SIP/2.0. Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK54A5503. From: <sip:05751944945@E.F.G.H>;tag=8E2C3094-11F5. To: <sip:0662293701@sip.mydomain.org>. Date: Fri, 06 May 2005 11:35:27 GMT. Call-ID: C73B2995-BD5911D9-971C9909-651E86BE(a)E.F.G.H. Supported: rel1xx,timer. Min-SE: 1800. Cisco-Guid: 3342503125-3176731097-3023962122-4094721758. User-Agent: Cisco-SIPGateway/IOS-12.x. Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER. CSeq: 101 INVITE. Max-Forwards: 10. Remote-Party-ID: <sip:05751944945@E.F.G.H>;party=calling;screen=yes;privacy=off. Timestamp: 1115379327. Contact: <sip:05751944945@E.F.G.H:5060>. Expires: 180. Allow-Events: telephone-event. Content-Type: application/sdp. Content-Length: 536. . v=0. o=CiscoSystemsSIP-GW-UserAgent 974 6362 IN IP4 E.F.G.H. s=SIP Call. c=IN IP4 E.F.G.K. t=0 0. m=audio 19340 RTP/AVP 18 8 0 4 3 98 99 2 125 101 19. c=IN IP4 E.F.G.K. a=rtpmap:18 G729/8000. a=fmtp:18 annexb=yes. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:4 G723/8000. a=fmtp:4 annexa=yes. a=rtpmap:3 GSM/8000. a=rtpmap:98 G726-16/8000. a=rtpmap:99 G726-24/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:125 X-CCD/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=rtpmap:19 CN/8000. a=direction:passive. # U A.B.C.D:5060 -> E.F.G.H:5060 SIP/2.0 100 trying -- your call is important to us. Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK54A5503. From: <sip:05751944945@E.F.G.H>;tag=8E2C3094-11F5. To: <sip:0662293701@sip.mydomain.org>. Call-ID: C73B2995-BD5911D9-971C9909-651E86BE(a)E.F.G.H. CSeq: 101 INVITE. Server: SPSexp (0.9.2 (i386/linux)). Content-Length: 0. Warning: 392 A.B.C.D:5060 "Noisy feedback tells: pid=9919 req_src_ip=E.F.G.H req_src_port=52007 in_uri=sip:0662293701@sip.mydomain.org:5060 out_uri=sip:0662293701@W.W.W.W:4848 via_cnt==1". . # U A.B.C.D:5060 -> W.W.W.W:4848 33275@0:1480 ........INVITE sip:0662293701@W.W.W.W:4848 SIP/2.0. Record-Route: <sip:A.B.C.D;ftag=8E2C3094-11F5;lr=on>. Via: SIP/2.0/UDP A.B.C.D;branch=z9hG4bK60cd.c694de32.0. Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK54A5503. From: <sip:05751944945@E.F.G.H>;tag=8E2C3094-11F5. To: <sip:0662293701@sip.mydomain.org>. Date: Fri, 06 May 2005 11:35:27 GMT. Call-ID: C73B2995-BD5911D9-971C9909-651E86BE(a)E.F.G.H. Supported: rel1xx,timer. Min-SE: 1800. Cisco-Guid: 3342503125-3176731097-3023962122-4094721758. User-Agent: Cisco-SIPGateway/IOS-12.x. Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER. CSeq: 101 INVITE. Max-Forwards: 9. Remote-Party-ID: <sip:05751944945@E.F.G.H>;party=calling;screen=yes;privacy=off. Timestamp: 1115379327. Contact: <sip:05751944945@E.F.G.H:5060>. Expires: 180. Allow-Events: telephone-event. Content-Type: application/sdp. Content-Length: 536. . v=0. o=CiscoSystemsSIP-GW-UserAgent 974 6362 IN IP4 E.F.G.H. s=SIP Call. c=IN IP4 E.F.G.K. t=0 0. m=audio 19340 RTP/AVP 18 8 0 4 3 98 99 2 125 101 19. c=IN IP4 E.F.G.K. a=rtpmap:18 G729/8000. a=fmtp:18 annexb=yes. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:4 G723/8000. a=fmtp:4 annexa=yes. a=rtpmap:3 GSM/8000. a=rtpmap:98 G726-16/8000. a=rtpmap:99 G726-24/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:125 X-CCD/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=rtpmap:19 CN/80 # U A.B.C.D:5060 -> W.W.W.W:4848 33276@0:1480 ........INVITE sip:0662293701@W.W.W.W:4848 SIP/2.0. Record-Route: <sip:A.B.C.D;ftag=8E2C3094-11F5;lr=on>. Via: SIP/2.0/UDP A.B.C.D;branch=z9hG4bK60cd.c694de32.0. Via: SIP/2.0/UDP E.F.G.H:5060;branch=z9hG4bK54A5503. From: <sip:05751944945@E.F.G.H>;tag=8E2C3094-11F5. To: <sip:0662293701@sip.mydomain.org>. Date: Fri, 06 May 2005 11:35:27 GMT. Call-ID: C73B2995-BD5911D9-971C9909-651E86BE(a)E.F.G.H. Supported: rel1xx,timer. Min-SE: 1800. Cisco-Guid: 3342503125-3176731097-3023962122-4094721758. User-Agent: Cisco-SIPGateway/IOS-12.x. Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER. CSeq: 101 INVITE. Max-Forwards: 9. Remote-Party-ID: <sip:05751944945@E.F.G.H>;party=calling;screen=yes;privacy=off. Timestamp: 1115379327. Contact: <sip:05751944945@E.F.G.H:5060>. Expires: 180. Allow-Events: telephone-event. Content-Type: application/sdp. Content-Length: 536. . v=0. o=CiscoSystemsSIP-GW-UserAgent 974 6362 IN IP4 E.F.G.H. s=SIP Call. c=IN IP4 E.F.G.K. t=0 0. m=audio 19340 RTP/AVP 18 8 0 4 3 98 99 2 125 101 19. c=IN IP4 E.F.G.K. a=rtpmap:18 G729/8000. a=fmtp:18 annexb=yes. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:4 G723/8000. a=fmtp:4 annexa=yes. a=rtpmap:3 GSM/8000. a=rtpmap:98 G726-16/8000. a=rtpmap:99 G726-24/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:125 X-CCD/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=rtpmap:19 CN/80 Did ever seen this strangeness?? Regards, Verbal Francesco Bottà Service Engineering Eutelia SpA Arezzo 0575-1944945 [ Ai sensi e per gli effetti della Legge sulla tutela della riservatezza personale (DLgs. 196/03 e collegate), questa mail è destinata unicamente alle persone sopra indicate e le informazioni in essa contenute sono da considerarsi strettamente riservate. E' proibito leggere, copiare, usare o diffondere il contenuto della presente mail senza autorizzazione. Se avete ricevuto questo messaggio per errore, siete pregati di rispedire lo stesso al mittente. Grazie ]

4 3

[Serusers] 0.9.0 Source and Debian Sarge Compile Problems (Jabber & MySql & Radius)
by Ozan Blotter 07 May '05

07 May '05

I'm on Debian Sarge, i want to build SER modules, radius and mysql and jabber in one time. With Mandrake and Red Hat there was no problem but now experiencing difficulties with Debian and can't find information regarding to this... rapid:/ser-0.9.0# make modules=modules/mysql modules >> it's done without problems :) rapid:/ser-0.9.0# make modules=modules/auth_radius modules make[1]: Entering directory `/ser-0.9.0/modules/auth_radius' make[1]: Leaving directory `/ser-0.9.0/modules/auth_radius' make[1]: Entering directory `/ser-0.9.0/modules/auth_radius' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c authorize.c -o authorize.o gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c authrad_mod.c -o authrad_mod.o authrad_mod.c: In function `mod_init': authrad_mod.c:110: error: `DICT_VENDOR' undeclared (first use in this function) authrad_mod.c:110: error: (Each undeclared identifier is reported only once authrad_mod.c:110: error: for each function it appears in.) authrad_mod.c:110: error: `vend' undeclared (first use in this function) authrad_mod.c:134: warning: assignment makes pointer from integer without a cast authrad_mod.c:139: error: too many arguments to function `rc_conf_str' authrad_mod.c:139: error: too many arguments to function `rc_read_dictionary' authrad_mod.c:144: warning: implicit declaration of function `rc_dict_findvend' authrad_mod.c:159: error: too many arguments to function `rc_dict_findattr' authrad_mod.c:159: error: too many arguments to function `rc_dict_findval' make[1]: *** [authrad_mod.o] Error 1 make[1]: Leaving directory `/ser-0.9.0/modules/auth_radius' rapid:/ser-0.9.0#

3 2

[Serusers] SERWEB
by harry gaillac 07 May '05

07 May '05

Hello, I posted to you and serusers mailing list many mails about serweb in the past . You have been adding new features to serweb however I would have liked to find more documentation and roadmap for serweb project (and other projects) . Could you tell us more about XXL ? I downloaded the latest release today (unstable) by hoping it would run well with ser (unstable) . I still wish to test accounting, missed call, message stored, ... but after setting up serweb I get these messages after a user is logged. However I can't fix these errors messages: from my_account.php: Attribute named 'fw_voicemail' does not exists Attribute named 'sw_user_status_visible' does not exists from missed_calls.php: DB Error: syntax error Regards Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

3 2

[Serusers] SER and NavisRadius not working
by davor jovanovic 06 May '05

06 May '05

Hi all, I'm trying to configure SER 0.8.14 to use authentication with NavisRadius 4.5.0. On my X-Lite (X-Lite v2.0 Build 1103m) client I'm getting "Login Failed! Contact Network Admin." I'm getting following message from NavisRadius. Why? => Reply-Message = "No check.password" I would be very grateful if someone could look at my ser.cfg and output from NavisRadius. Best regards **************************************************************************** * This is what I get on RADIUS server (different from SER machine) Client: Client-Class = "#default" Nas_Port_Normalization = off Radius_Remove_Trailing_Nul = TRUE Radius_Append_Trailing_Nul = FALSE Auto_Remove_Check_Items = TRUE Check_Authenticators = TRUE Session_Time_From_Time_Of_Day = FALSE Radius_Charset = "UTF8" Client-Class = "video" Client-Dictionary = "draft_ietf_radext_digest_auth_01" **** dictionary of radiusclient on SER machine is adjusted to dictionary of RADIUS, and RADIUS can recognize attributes - except if I MUST run sterman_aaa_sip_00 on NavisRadius???? I attached dictionary in radiusclient to this message **** Client-Secret = <hidden> Request: User-Name = "djovanov.srce" Digest-Username = "djovanov.srce" Digest-Realm = "srce.hr" Digest-Nonce = "427b5aa983df858da94c50d1f8132a69e3e703ad" Digest-URI = "sip:srce.hr" Digest-Method = "REGISTER" Digest-Response = "ca6202fe55c51501295a9bc6ab325420" Service-Type = IAPP-Register Anonymous = v0-a208-646A6F76616E6F7669632E73726365 **** RADIUS doesn't recognize code 208, which is Sip-Uri-User **** ****Am I missing Digest-Algorithm? Why SER doesn't send this attribute?**** NAS-IP-Address = 161.53.0.131 NAS-Port = 5060 Packet: Client-Name = "161.53.0.131" Packet-Type = Access-Request Packet-Identifier = 213 Packet-Length = 197 Packet-Authenticator = 2B25D6D4934B930EB21F8E1B6AEFFE50 Source-Address = 161.53.0.131 Source-Port = 33159 Destination-Address = 0.0.0.0 Destination-Port = 1812 Receipt-Time = "2005/05/06 13:44:32" Full-User-Name = "djovanov.srce" Base-User-Name = "djovanov.srce" Normalized-Nas-Port = 5060 19 <engine.worker.0> -> checkDigest[AuthHttpDigest] 19 <plugin.AuthHttpDigest.checkDigest> FAILURE -- No check.password 20 <engine.worker.0> Variable group trace Reply: Reply-Message = "No check.password" **** this is message is which I get from NavisRadius **** **************************************************************************** ************ This is my ser.cfg fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 10) modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) modparam("group_radius", "use_domain", 0) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };

1 0

RE: [Serusers] LCR failure syntax
by Matt Schulte 06 May '05

06 May '05

Woohoo, thanks so much. Actually that lcr patch fixed it, everything works great now. Also on a related note can qm_malloc cause SER hangs or any other bad things? Does it actually fix memory leaks or just help report them? Thanks again, you rock... Matt -----Original Message----- From: Juha Heinanen [mailto:jh@tutpro.com] Sent: Wednesday, May 04, 2005 8:30 AM To: Matt Schulte Subject: RE: [Serusers] LCR failure syntax Matt Schulte writes: > FYI, I *finally* got around to doing this. A debug shows that load_gw is > in fact loading both gateways.. matt, > 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_addr,374650ce> > 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112) > 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a3ec frag. > 0xf509a3d4 (size=32) on 1 -th hit > 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_port,0> > 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112) > 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a43c frag. > 0xf509a424 (size=32) on 1 -th hit > 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_addr,511f7d1> > 8(30980) qm_malloc(0xf4edf000, 31) called from usr_avp.c: add_avp(112) > 8(30980) qm_malloc(0xf4edf000, 32) returns address 0xf509a48c frag. > 0xf509a474 (size=32) on 1 -th hit > 8(30980) DEBUG:load_gws(): Added AVP <lcr_gw_port,0> there was a bug in the debug output of DEBUG:load_gws(), which is fixed on the current CVS HEAD version and also in current https://tutpro.com/tmp/lcr-0.9.0.tgz. that, however, would not explain why load_gw() loads two gws, but next_gw() calls succeed only once. i checked next_gw() code and it calls search_first_avp avp = search_first_avp(gw_ap_avp_name_str, addr_port_name, &val); and if that returns an avp, destroys that avp destroy_avp(avp); after first saving its value for further processing. these are the only function calls related to avps in next_gw() function. so there is no way the second gw would disappear somewhere unless (1) you use the same avp name/number for something else too or (2) there is a bug in ser usr_avp code. i suggest that you try once more with the current lcr backport. regarding debugging, unless you are looking for memory leaks, i suggest you turn off qm_malloc debugs by commenting -DDBG_QM_MALLOC in Makefile.defs. -- juha

2 1

[Serusers] Double INVITE with radius makes two radius records
by Wojciech Ziniewicz 06 May '05

06 May '05

Problem : for each call i get two INVITE messages and one BYE message what finally gives me two record on one call. Below i give my radacct plus my ser.cfg. using SER from cvs on debian made with "make deb". ----------------------ser.cfg--------------------------------------------- [...] modparam("acc", "radius_config", "/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_flag", 1) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") [...] if (!method=="REGISTER") record_route(); if (loose_route()) { if (method=="INVITE" || method=="ACK" || method=="BYE") { setflag(1); t_relay(); break; }; }; #traffic to PSTN Multitech. if (uri=~"^sip:8[0-9]{3}@*") { rewritehostport ("192.168.0.163:5060"); if (method=="INVITE" || method=="ACK" || method=="BYE") { setflag(1); t_relay(); break; }; }; [...] -------------#EOF----------------------------------------------------------- ------------------------------# --------------------------------radacct: -----------------------------------------1---(start)-----15:36-------------- ---------------- Fri May 6 15:36:18 2005 Acct-Status-Type = Start Service-Type = IAPP-Register Sip-Response-Code = 200 Error-Cause = 1 User-Name = "494(a)192.168.0.122" Calling-Station-Id = "sip:494@192.168.0.122" Called-Station-Id = "sip:8506633351@192.168.0.122" Sip-Translated-Request-URI = "sip:8506633351@192.168.0.163:5060" Acct-Session-Id = "FXhmq9wjIM0muabU(a)192.168.0.133" Sip-To-Tag = "1974686540" Sip-From-Tag = "jKddrjjMVfZA1LZs" Sip-Cseq = "1" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "b67ece239e51c387" Timestamp = 1115386578 -------------------------------------------------2---(start)-----15:36------ ------------------------- Fri May 6 15:36:18 2005 Acct-Status-Type = Start Service-Type = IAPP-Register Sip-Response-Code = 200 Error-Cause = 4 User-Name = "494(a)192.168.0.122" Calling-Station-Id = "sip:494@192.168.0.122" Called-Station-Id = "sip:8506633351@192.168.0.122" Sip-Translated-Request-URI = "sip:8506633351@192.168.0.163:5060" Acct-Session-Id = "FXhmq9wjIM0muabU(a)192.168.0.133" Sip-To-Tag = "1974686540" Sip-From-Tag = "jKddrjjMVfZA1LZs" Sip-Cseq = "1" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "b67ece239e51c387" Timestamp = 1115386578 ----------------------------------------------3------(stop)--15:36---------- ------------------------ Fri May 6 15:36:23 2005 Acct-Status-Type = Stop Service-Type = IAPP-Register Sip-Response-Code = 200 Error-Cause = 8 User-Name = "8506633351(a)192.168.0.122" Calling-Station-Id = "sip:8506633351@192.168.0.122" Called-Station-Id = "sip:494@192.168.0.122" Sip-Translated-Request-URI = "sip:494@192.168.0.133:5060" Acct-Session-Id = "FXhmq9wjIM0muabU(a)192.168.0.133" Sip-To-Tag = "jKddrjjMVfZA1LZs" Sip-From-Tag = "1974686540" Sip-Cseq = "2" NAS-IP-Address = 127.0.0.1 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 127.0.0.1 Acct-Unique-Session-Id = "3ac6feec9288d040" Timestamp = 1115386583 ---------------------------------------------------------------------------- ---------------------#EOF -- Pozdrawiam, Wojciech Ziniewicz Optocomp sp.z.o.o, www.optocomp.pl mailto: wojtekz(a)optocomp.pl +48(0)691031535

1 0

[Serusers] SER and NavisRadius not working
by davor jovanovic 06 May '05

06 May '05

Hi all, I'm trying to configure SER 0.8.14 to use authentication with NavisRadius 4.5.0. On my X-Lite (X-Lite v2.0 Build 1103m) client I'm getting "Login Failed! Contact Network Admin." I'm getting following message from NavisRadius. Why? => Reply-Message = "No check.password" I would be very grateful if someone could look at my ser.cfg and output from NavisRadius. Best regards **************************************************************************** * This is what I get on RADIUS server (different from SER machine) Client: Client-Class = "#default" Nas_Port_Normalization = off Radius_Remove_Trailing_Nul = TRUE Radius_Append_Trailing_Nul = FALSE Auto_Remove_Check_Items = TRUE Check_Authenticators = TRUE Session_Time_From_Time_Of_Day = FALSE Radius_Charset = "UTF8" Client-Class = "video" Client-Dictionary = "draft_ietf_radext_digest_auth_01" **** dictionary of radiusclient on SER machine is adjusted to dictionary of RADIUS, and RADIUS can recognize attributes - except if I MUST run sterman_aaa_sip_00 on NavisRadius???? I attached dictionary in radiusclient to this message **** Client-Secret = <hidden> Request: User-Name = "djovanov.srce" Digest-Username = "djovanov.srce" Digest-Realm = "srce.hr" Digest-Nonce = "427b5aa983df858da94c50d1f8132a69e3e703ad" Digest-URI = "sip:srce.hr" Digest-Method = "REGISTER" Digest-Response = "ca6202fe55c51501295a9bc6ab325420" Service-Type = IAPP-Register Anonymous = v0-a208-646A6F76616E6F7669632E73726365 **** RADIUS doesn't recognize code 208, which is Sip-Uri-User **** ****Am I missing Digest-Algorithm? Why SER doesn't send this attribute?**** NAS-IP-Address = 161.53.0.131 NAS-Port = 5060 Packet: Client-Name = "161.53.0.131" Packet-Type = Access-Request Packet-Identifier = 213 Packet-Length = 197 Packet-Authenticator = 2B25D6D4934B930EB21F8E1B6AEFFE50 Source-Address = 161.53.0.131 Source-Port = 33159 Destination-Address = 0.0.0.0 Destination-Port = 1812 Receipt-Time = "2005/05/06 13:44:32" Full-User-Name = "djovanov.srce" Base-User-Name = "djovanov.srce" Normalized-Nas-Port = 5060 19 <engine.worker.0> -> checkDigest[AuthHttpDigest] 19 <plugin.AuthHttpDigest.checkDigest> FAILURE -- No check.password 20 <engine.worker.0> Variable group trace Reply: Reply-Message = "No check.password" **** this is message is which I get from NavisRadius **** **************************************************************************** ************ This is my ser.cfg fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 10) modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) modparam("group_radius", "use_domain", 0) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; **************************************************************************** ************ This is output from XLite client SEND TIME: 367959953 SEND >> 161.53.0.131:5060 REGISTER sip:srce.hr SIP/2.0 Via: SIP/2.0/UDP 161.53.0.112:5060;rport;branch=z9hG4bK5F06B40648DE4583908CA9F59275C8AC From: djovanov.srce <sip:djovanov.srce@srce.hr>;tag=1082157231 To: djovanov.srce <sip:djovanov.srce@srce.hr> Contact: "djovanov.srce" <sip:djovanov.srce@161.53.0.112:5060> Call-ID: 9AE1D3A885904642B6446C443007BA11(a)srce.hr CSeq: 6774 REGISTER Expires: 1800 Authorization: Digest username="djovanov.srce",realm="srce.hr",nonce="427b6e9134acf8132394741bae95 d74a5994cb67",response="e6f6d76db22b74c6c0746d2cff9b34f8",uri="sip:srce.hr" Max-Forwards: 70 User-Agent: X-Lite release 1103m Content-Length: 0 RECEIVE TIME: 367959968 RECEIVE << 161.53.0.131:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 161.53.0.112:5060;rport=5060;branch=z9hG4bK5F06B40648DE4583908CA9F59275C8AC From: djovanov.srce <sip:djovanov.srce@srce.hr>;tag=1082157231 To: djovanov.srce <sip:djovanov.srce@srce.hr>;tag=06b273b7ac7b46f473f32e25d8adc515.da4f Call-ID: 9AE1D3A885904642B6446C443007BA11(a)srce.hr CSeq: 6774 REGISTER WWW-Authenticate: Digest realm="srce.hr", nonce="427b6e9134acf8132394741bae95d74a5994cb67" Server: Sip EXpress router (0.10.99-dev0 (i386/linux)) Content-Length: 0 Warning: 392 161.53.0.131:5060 "Noisy feedback tells: pid=14777 req_src_ip=161.53.0.112 req_src_port=5060 in_uri=sip:srce.hr out_uri=sip:srce.hr via_cnt==1"

1 0

[Serusers] php with mysql, where is APXS?
by Llanos Serna García-Conde 06 May '05

06 May '05

1 0

[Serusers] ser.cfg
by FaberK 06 May '05

06 May '05

Hi, I've got some problems. When I use the simple ser.cfg, everything is fine, the ser starts, I can call to other users and I can try to add other users. When I want to change and try to use MySQL, nothing goes. I always receive: Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed I've tryed to touch it but nothing. I've installed the libmysqlclient; I've rebuilt the acc.so according other solutions I saw in this ml... Using the command ser -c it reply that the cfg is ok. Same thing if I try to setup to use it with PSTN What can I do??? I've got to add users, allow them to call to PSTN and accounting the calls... PLEASE HELP!!! Best Regards -- .:FaberK:.

2 1

[Serusers] problem with acc module
by karl 06 May '05

06 May '05

Hi, I have configured a cisco gateway with the timer receive-rtcp so that in case of sip client disconnection from the network, the gateway would still send a BYE and disconnects the POTS side after the timer hits. The cisco is doing the job however SER's ACC module is not registering these BYEs; i.e. I cannot account for duration of the call. Is this because no OK is sent back from the sip client that was disconnected? Is there a way to get around this? Thanks, Karl --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site!

1 0

[Serusers] Big trouble with subst() and REGISTER requests
by Jerome Martin 06 May '05

06 May '05

Hello everyone, I badly need some help on the following issue ... I am trying to rewrite the To: and From: headers in order to change some prefixes found in REGISTER requests. In fact I want to save both the original request and the modified one. However, even though subst() reports a successfull replace in the logs (textops: subst_f: replacing at offset 41 [sip:33] with [sip:0] / textops: subst_f: replacing at offset 312 [sip:33] with [sip:0] ), the message does not seem to actually be modified. When I dump the request before and after in a file, I see no difference, and the save_noreply is processing the original REGISTER request. I have read a thread from sep. 2003 where someone said the subst replacement is only effective just before the message is sent out ... so I even tried "faking" a t_relay before the save_noreply, but it does not work neither. Here is the code I am using : if (method=="REGISTER") { save("location"); exec_msg("echo -e REGISTER `date` '\n' `printenv | grep SIP` '\n' >> /var/log/ser-register.log"); if (search("^From.*sip:33.*")) { subst('/sip:33/sip:0/g'); save_noreply("location"); exec_msg("echo -e REGISTER DUP `date` '\n' `printenv | grep SIP` '\n' >> /var/log/ser-register-dup.log"); exec_msg("cat - >> /var/log/ser-register-dup.log"); break; }; break; }; Does anyone have an idea why it is not working at all ? FYI. I also tried textops replace_all function, with no luck. Best Regards, Jerome Martin

1 0

[Serusers] HELP: hunting function on ser ?
by Charles Wang 06 May '05

06 May '05

Hi, ALL: If there are three UACs(1001, 1002, 1003) register on the same SER, and they are setting as the same group number for example "1000". If another UAC make a call to 1001, and 1001 is buzy. The call will be transfer or forward to 1002 or 1003. How to implement it? Does anybody have an idea/soluton for it? Help me please. -- Best Regards Charles

2 4

Re: [Serusers] I need to alter and duplicate REGISTER saves
by Jerome Martin 06 May '05

06 May '05

Hi, I tried many things but none seems to work. I am using ser 0.8.4. With the following code in ser.cfg, every time a REGISTER arrives with the 33XXXXXX format, the request is logged in my duplicates log, but the subst line does not seem to work. I tried replace and replace_all also, but no luck. I though that maybe the exported shell variables I am dumping in my log file are not updated after the subst, but a serctl ul show clearly display only the 33XXXXXX numbers in the location database. Here is the code I am using : if (method=="REGISTER") { save("location"); exec_msg("echo -e REGISTER `date` '\n' `printenv | grep SIP` '\n' >> /var/log/ser-register.log"); if (search("^From.*sip:33.*")) { subst('/sip\:33/sip\:0/g'); save_noreply("location"); exec_msg("echo -e REGISTER DUP `date` '\n' `printenv | grep SIP` '\n' >> /var/log/ser-register-dup.log"); break; } break; }; Any idea ? Alan Litster wrote: >>Hi, >> >>Thanks for your reply. >> >>Alan Litster wrote: >> >> >> >>>Doing it the way you've suggested would mean modifying the From and To >>> >>> >>> >>> >>Indeed. I already tried that, using the replace() / replace_all() >>textops functions, but I could not even manage to have the header >>modified. It just did nothing at all .... >> >> >I've had the situation where I've needed to update the Refer-To: header as >the gateway was unable to handle it in a satisfactory manor. For this I used >the subst function in the textops module, I'm not sure if this functions any >differently to the replace functions. > > > >>Besides, in the recent thread Re: [Serusers] HF replace, someone said >>that modifying From: and To "is not allowed". >> >> >It's recomended not too, though most people want to modify the From on >INVITE's. It may not be such a problem on a REGISTER method, just do a >save_noreply("location") > > > >>But I am wondering ... ain't it the "Contact:" header which is used by >>register.so/usrloc.so ? >> >> >It's Contact header is used as the location of the UAC, >'username@ipaddress_of_uac'. The From/To fields are used as the username >part on the sip registrar, generally the From/To are the same though may not >always be the case. >See http://www.faqs.org/rfcs/rfc3261.html section 10.2 > > > >>>fields, then doing a save. This should in theory all the UAC to >>> >>> >>register on >> >> >>>the two addresses, it could get a little messy. >>> >>> >>> >>> >>I agree. I anticipate a few issues on that side. >> >> >> >>>An alternative would be to create an alias, this would be fine >>> >>> >>if you knew >> >> >>>before hand what format they would register with. >>> >>> >>> >>> >>Well, I know which server will send what format, and I can afford to >>hardcode the IPs in the ser.cfg. But after reading the section about >>aliases in the ser Admin's manual, I must confess it is not clear for >>me. Could you elaborate on that idea ? >> >> >In your example you want lookup("33122334455") to return the same as >lookup("0122334455"). Well if 33122334455 is an alias for 0122334455 it >will. First it does an alias lookup of 33122334455(a)mydomain.com which >replaces the r-uri with 0122334455(a)mydomain.com then it does a lookup on >that, finds a match and does a further replace with 0122334455(a)1.2.3.4 (The >IP address of the UAC from the Contact record) > > > >>>>-----Original Message----- >>>>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On >>>>Behalf Of Jerome Martin >>>>Sent: 04 May 2005 15:16 >>>>To: serusers(a)lists.iptel.org >>>>Subject: [Serusers] I need to alter and duplicate REGISTER saves >>>> >>>> >>>>Hello everyone, >>>> >>>>After looking everywhere in the docs and ML archives, I couldn't find a >>>>way to solve my problem, so I would appreciate any help. >>>> >>>>We have several iPBX servers sending REGISTERs to a SER registrar. Some >>>>of those servers send us the numbers to register as aor in the form >>>>0XXXXXXXXX (local numbering plan), some other in the form 33XXXXXXXXX >>>>(local country code prefix). For various reasons, we need to handle >>>>those different REGISTERs simultaneously, and be able to lookup both >>>>formats in the location database. >>>> >>>>What I'm looking for is a way to "duplicate" the REGISTER entries, i.e. >>>>when ser receives a REGISTER for 33XXXXXXXXX, I'd like it to save() the >>>>33XXXXXXXXX, but also create an entry for the corresponding 0XXXXXXXXX. >>>> >>>>Example : SER receives a REGISTER request for 33122334455. I'd like to >>>>have two aors in the location database, so that lookup("33122334455") >>>>and lookup("0123344556") would both return the same thing. >>>> >>>>What I have in mind is something like this : >>>> >>>>if (method=="REGISTER") { >>>> # Always save the original aor >>>> save("location"); >>>> >>>> # If the number starts with 33, also save a duplicate aor in the >>>>0XXXXXXXXX format >>>> if (search("^From.*sip:33.*")) { >>>> >>>> # Insert some code to alter the received SIP message and >>>> >>>> >>change the >> >> >>>> # number in order to save the 0XXXXXXXXX aor >>>> # ... >>>> # ... >>>> # ... >>>> >>>> save("location"); >>>> break; >>>> } >>>> break; >>>>}; >>>> >>>>Can anyone help ? >>>> >>>>Best Regards, >>>>Jerome Martin >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>> >>>----------------------------------------------------------------- >>> >>> >>---------------------------- >> >> >>>This email, and any files transmitted with it, is copyright and >>> >>> >>may contain confidential information. >> >> >>>The contents are intended for the use of the addressee(s) only. >>>Unauthorized use may be unlawful. >>>If you receive this email by mistake, please advise sender immediately. >>>The views of the author may not necessarily constitute the views >>> >>> >>of the company. >> >> >>>Nothing in this mail shall bind the company in any contract or >>> >>> >>obligation. >> >> >>>Tel +44 (0) 20 8002 6000 >>>Fax +44 (0) 20 8002 6060 >>> >>>______________________________________________________________________ >>>This email has been scanned by the MessageLabs Email Security System. >>>For more information please visit http://www.messagelabs.com/email >>>______________________________________________________________________ >>> >>> >>> >>> > >--------------------------------------------------------------------------------------------- >This email, and any files transmitted with it, is copyright and may contain confidential information. >The contents are intended for the use of the addressee(s) only. >Unauthorized use may be unlawful. >If you receive this email by mistake, please advise sender immediately. >The views of the author may not necessarily constitute the views of the company. >Nothing in this mail shall bind the company in any contract or obligation. > >Tel +44 (0) 20 8002 6000 >Fax +44 (0) 20 8002 6060 > >______________________________________________________________________ >This email has been scanned by the MessageLabs Email Security System. >For more information please visit http://www.messagelabs.com/email >______________________________________________________________________ > >

1 0

[Serusers] Bad Default Config file
by Deadly Earnest 06 May '05

06 May '05

Hell all, Firstly I'm new here so forgive a perhaps fairly basic question. I've just compiled and installed ser on this Linux PC: $ ser -V version: 0.8.14 (i386/linux) When I try to run the Ser Sip Server I get an error message to say that there's errors in the Config file. I thought it must be picking up the wrong file so I used -f option to force it to the default config file and it gives the same error. My problem is in the Config file provided. $ ser -f /usr/local/etc/ser/ser.cfg ERROR: bad config file (3 errors) I thought I'd check the log files but I can't find mention of them in the install documentation that I'm looking at: http://cvs.berlios.de/cgi-bin/viewcvs.cgi/*checkout*/ser/sip_router/INSTALL Can anybody tell me where the log files are and if there is any obvious way of getting rid of the errors in the default ser.cfg?

1 0

[Serusers] RTPProxy Remote mode - startup command?
by Alex Mack 06 May '05

06 May '05

Hi! I want to use rtpproxy in remote mode, i.e. rtpproxy runs on another machine as ser. I've tried to start rtpproxy accordingly to the README.remote with: ./rtpproxy -s udp:213.10.10.10 But I only get this error response: rtpproxy: explicit binding address has to be specified in UDP command mode What am I doing wrong? Alex Mack

3 4

[Serusers] can't login to serweb
by Dhanuka S K 06 May '05

06 May '05

hi, I installed serweb, but i can't login to it using default uaser name password it says bad password and username... Dhanuka Kaluarachchi Head of production - Web & E-Business Lanka Internet Services Ltd.

1 0

[Serusers] CDR problem
by yy 06 May '05

06 May '05

Hi guys, I'm currently trying out CDRTool with ser for generating call detail records.Currently, I getting a problem in a single call session whereby when a user calls a certain destination and an invite is sent; if the called party does not reply in time, a reinvite is sent. However, both records are recorded in CDRTool, each having the same SIP Session. Why it this so? Shouldn't only one session be recorded? Session start time SIP caller In SIP destination Out Dur Price KBIn KBOut Status Codecs 4N 2005-05-05 18:32:22 1001(a)lab.test.com 1002(a)lab.test.com 00.07 Ok (200) Signalling information SIP Session: 000ded22-eeb20005-306b5b03-43a91caf(a)192.168.10.2 SIP Method: 1 from : SIP Status: Ok (200) DelayTime: (s) SIP From: sip:1001@lab.test.com SIP To: sip:1002@lab.test.com Start time (caller): 2005-05-05 18:32:22 Asia Start time (proxy): 2005-05-05 18:32:22 Asia Stop time (proxy): 2005-05-05 18:32:29 Asia Session duration: 00:07 SIP Proxy: 192.168.1.2 Next SIP hop: Billing Party: 1001(a)lab.test.com 5N 2005-05-05 18:32:21 1001(a)lab.test.com 1002(a)lab.test.com 00:08 Ok (200) Signalling information SIP Session: 000ded22-eeb20005-306b5b03-43a91caf(a)192.168.10.2 SIP Method: 1 from : SIP Status: Ok (200) DelayTime: (s) SIP From: sip:1001@lab.test.com SIP To: sip:1002@lab.test.com Start time (caller): 2005-05-05 18:32:21 Asia Start time (proxy): 2005-05-05 18:32:21 Asia Stop time (proxy): 2005-05-05 18:32:29 Asia Session duration: 00:08 SIP Proxy: 192.168.1.2 Next SIP hop: Billing Party: 1001(a)lab.test.com Kindly advise, Regards, YY

1 0

[Serusers] How to submit patch/script?
by Paul Belanger 05 May '05

05 May '05

I wrote a script last night to start/stop/restart SER for FreeBSD as I was unable to see one in the src. I'm happy to submit it into SER, but unsure how to do this. PB

2 1

[Serusers] setflag...max number
by Iqbal 05 May '05

05 May '05

Hi Is there a max number, I set one at 51, and got an error, is this a feature.. Iqbal

2 1

[Serusers] Forware cancel to remote
by Leon Sun 05 May '05

05 May '05

Hi, I forward a call to a remote softswitch from my SER (sip.xyz.com) to (sip.abc.com). For example, if (method=="INVITE" ) { if (uri=~"sip:011"|| uri=~"sip:1") { forward(sip.abc.com,5060);break;}; }; After I hang up call from my UA , my SER can receive "CANCEL' but far end softswitch is still trying this call so that PSDN keep ringing. How can I let that softswitch get 'CANCEL' from my SER? Thanks Leon Sun

1 0

[Serusers] HF replace
by Mihaly Zachar 05 May '05

05 May '05

Hi everybody, I'm a newbie here... I'd like to change the "From:" HF ... here is my input: From: User Name <sip:aaa123456\@1.1.1.1>;tag=426f34e337ec2855o my regexp would be: s/^From:(.*)aaa(\d{6})(.*)/From:$1$2$3/ so, I would like to remove the "aaa" prefix from the number: the result should be: From: User Name <sip:123456@1.1.1.1>;tag=426f34e337ec2855o How can I use textops' replace() or subst_user() ?? Thanks, Misi

2 4

RE: [Serusers] Nat+SER
by Ricardo Martinez 05 May '05

05 May '05

Hello. There was an interesting discussion about the same issue. Check by Subject : [Serusers] STUN server on April 4. (you can check the mailing list) Regards, Ricardo.- > -----Mensaje original----- > De: info(a)beeplove.com [mailto:info@beeplove.com] > Enviado el: Jueves, 05 de Mayo de 2005 10:41 > Para: serusers(a)lists.iptel.org > Asunto: RE: [Serusers] Nat+SER > > > > > > I have a simple question, if i am using stun server if there any need > to use mediaproxy or rtpproxy, for users sitting behind routers ?? > and if yes which one is the better choise to do that (mediaproxy or > rtpproxy)? > > Thanks for help. > > > Stun server takes care of your clients who are behind > Assymetric NAT. It > also depends on client. Like, your cleints may not be forced > to use STUN > server. > Also, if your client use STUN, you need to use > [Media/RTP]Proxy to cover > users who are from Symetric NAT. > >From my personal experience, I found MediaProxy easy to > configure and have > some very good features. It doesn't mean RTPProxy is not good. I just > couldn't make RTPProxy worked. Maybe I was not that familiar with > RTPProxy/SER when I tried it. > Well, after MediaProxy worked, I didn't try RTPProxy again. > > MOhammad > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

RE: [Serusers] Nat+SER
by info＠beeplove.com 05 May '05

05 May '05

I have a simple question, if i am using stun server if there any need to use mediaproxy or rtpproxy, for users sitting behind routers ?? and if yes which one is the better choise to do that (mediaproxy or rtpproxy)? Thanks for help. Stun server takes care of your clients who are behind Assymetric NAT. It also depends on client. Like, your cleints may not be forced to use STUN server. Also, if your client use STUN, you need to use [Media/RTP]Proxy to cover users who are from Symetric NAT. >From my personal experience, I found MediaProxy easy to configure and have some very good features. It doesn't mean RTPProxy is not good. I just couldn't make RTPProxy worked. Maybe I was not that familiar with RTPProxy/SER when I tried it. Well, after MediaProxy worked, I didn't try RTPProxy again. MOhammad -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

[Serusers] Nat+SER
by Alex 05 May '05

05 May '05

I have a simple question, if i am using stun server if there any need to use mediaproxy or rtpproxy, for users sitting behind routers ?? and if yes which one is the better choise to do that (mediaproxy or rtpproxy)? Thanks for help.

2 1

Re: [Serusers] Re: [Serdev] Patched free-TLS implementation
by Alex Mack 05 May '05

05 May '05

Hi Cesc! I tried your previuos suggestions on changing cleint certificate check. I'm now running SSL_VERIFY_NONE. MS Messenger works again. But the snom still fails. Ethereal tells me the server doesn't ask for a client certificate any more. Ethereal also shows that "Cipher Suite: TLS_RSA_WITH_RC4_128_SHA" was selected. So far so good, but the snom still rejects the Server Hello with an Alert. What else have you changed? The original version worked with the snoms. BTW patch throws some warnings: # patch -i patch.core.cfg.files.diff patching file cfg.y Hunk #1 FAILED at 1. 1 out of 6 hunks FAILED -- saving rejects to file cfg.y.rej patching file cfg.lex Hunk #1 FAILED at 1. 1 out of 5 hunks FAILED -- saving rejects to file cfg.lex.rej cfg.y.rej reads: *************** *** 1,5 **** /* - * $Id: cfg.y,v 1.2 2005/01/06 14:35:10 sam Exp $ * * cfg grammar * --- 1,5 ---- /* + * $Id: cfg.y,v 1.4 2005/05/03 08:16:35 cesc Exp $ * * cfg grammar * cfg.lex.rej reads: *************** *** 1,5 **** /* - * $Id: cfg.lex,v 1.2 2005/01/06 14:35:10 sam Exp $ * * scanner for cfg files * --- 1,5 ---- /* + * $Id: cfg.lex,v 1.3 2005/04/11 08:18:31 cesc Exp $ * * scanner for cfg files * Seems to be a minor mismatch, it compiles well anyway. Alex Mack Cesc Santasusana schrieb: >Hi, > >Yeah ... I send it with my default config which is using client and server authentication. >I use this settings with minisip client (supports client side certs) and for tls between ser proxies. It works perfect. > >To turn client authentication off, check: >tls/tls_init.c file >init_ssl_ctx_behavior function > >the line >SSL_CTX_set_verify( _ctx, SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT, 0); > >means that the server will request a certificate from the client and if it doesn't get one, it will fail. > >Try changing it with: >SSL_CTX_set_verify( _ctx, SSL_VERIFY_PEER | SSL_VERIFY_CLIENT_ONCE, 0); >this way the server will request a cert, the client will not provide, but on the following renegotiation, the server (ser) will not ask for a cert. > >And if you want to turn verification off ... completely ... >SSL_CTX_set_verify( _ctx, SSL_VERIFY_NONE, 0); >this will also work for you if only using tls for ser2phone ... it will not work if you want tls between proxies ... as the ser client will accept ANY certificate from the ser server. >And then, from the prompt: > > >>make TLS=1 all && make TLS=1 install ;) >> >> > >This whole verification thing needs to be improved and probably the parameters should be changeable directly from the config file. This and many other parameters should be exchangeable without the need to recompile. > >Any volunteer for a ser-tls.README? :D > >Can you provide me with some extra info from the snom phones and the messenger? Do it offline, so you can send me some ethereal captures and ser logs ... > > >Regards, > >Cesc > > > > >>>>Alex Mack <amack(a)fhm.edu> 05/04/05 02:01PM >>> >>>> >>>> >Hi Cesc! > >I compiled in your patch. > >Now I'm facing a new problem: SER wants a client certificate from the >UA. Snom phones immediately reply with an ALERT and break up connection >upon the certificate requests. MS Messenger on the other hand sends at >least a reply - without certificate - and SER rejects the Client Hello >because of the missing client certificate: > >tls_accept: Error in SSL: >tls_error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer >did not return a certificate > >Could you please provide some more documentation about the new TLS >options you added? It seems you've implemented support for client >certificates for a two-way certificate authorization - which would be a >good thing if supported by the UAs, which don't right now. So how can I >turn it off again and get back to server side certification? > >Alex Mack > >Cesc Santasusana schrieb: > > > >>Hi everybody, >> >>The last i sent is a replacement as a whole for the original code sent by P. Griffiths. Sorry i forgot to mention that. >> >>The patches for cfg.y and cfg.lex are both in the same file (patch.core.cfg..files.diff) within the zip. I was lazy :) >>I resent it as a whole, and not as a diff, because i indented all the code with tabs, instead of spaces (so a diff would be bigger than just sending all the files). >> >>As for the CVS thing ... i agree with Juha. Either gets into the "official" cvs or we do something about it. The code i think is rather stable as it is (i only tested on my debian linux box, soon i will try on an ARM linux and i will report back on that too). For me, as long as it gets into a CVS, i don't care if it is mantained against HEAD or 0.9.0 (i use 0.9.0 .... so all my patches are against it). >> >>On a more philosophical level, i understand the "quietness" on iptel's side ... they have their own version, and make money on it. But the thing is that this free version is here to stay ... it is the "problem" of opensource. >>Another option would be for them to release their proprietary implementation if they feel that it is a better, more tested one. >>In any case, i think that this whole thing needs to be decided fast. >> >>Regards! >> >>Cesc >> >> >> >> >> >> >>>>>Alex Mack <amack(a)fhm.edu> 05/03/05 01:26PM >>> >>>>> >>>>> >>>>> >>Hi Cesc! >> >>Nice to have those fixes in a package. >> >>Is your cfg.y-patch to be applied *after* cfg.y.patch was applied or >>*instead* of cfg.y.patch? >> >>Or is your version a patched one which replaces the original >>implementation as a whole? In that case where's cfg.lex.patch? >> >>Alex Mack >> >>Cesc Santasusana schrieb: >> >> >> >> >>>Hi, >>> >>>I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). >>> >>>Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). >>> >>>Enjoy! >>> >>>Cesc >>> >>> >>> >>> >Unclassified > > >>>------------------------------------------------------------------------ >>> >>>_______________________________________________ >>>Serdev mailing list >>>serdev(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serdev >>> >>> >>> >>> >>> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> >> > > > > >

2 1

RE: [Serusers] RE: Ser Crashes
by Elton Machado 05 May '05

05 May '05

There is a missing line in your ser.cfg file at least the db_url parameter ... or are you using the default permissions? Is not a bad idea to have the line anyway, here it goes... modparam("auth_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") Regards, -----Original Message----- From: harry gaillac [mailto:gaillacharry@yahoo.fr] Sent: quinta-feira, 5 de Maio de 2005 10:38 To: Elton Machado Subject: RE: [Serusers] RE: Ser Crashes Look at my ser.cfg do you add users in db with serctl ? Harry --- Elton Machado <elton.machado(a)gmail.com> a écrit : > And did you confirm if your mysql accept local connection with user > name and password you are using? > > What do you mean by your authentication is working? > Can you provide us a > snip of your code? > > > > Regards, > > > > > > > > > > > > _____ > > From: Edgardo O. Gonzales II > [mailto:edgardo.g@pacific.net.ph] > Sent: sexta-feira, 29 de Abril de 2005 5:36 > To: Elton Machado; 'IpTel List'; 'Iptel Mailing list' > Subject: RE: [Serusers] RE: Ser Crashes > > > > > I already did.. Im sure my username and password is correct because my > authentication is working.. > any other suggestion .. > > At 06:17 AM 4/29/2005, Elton Machado wrote: > > > > Did you checked out well your configuration? > > You have to have something like... > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > #...... > modparam("auth_db|usrloc", "db_url", > "mysql://ser:heslo@localhost/ser") > modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", > "password_column", "password") modparam("usrloc", "db_mode", 2) > > to ser load things up from database, check if you have the right > username and password, and if your mysql database is running. > > > > Regards, > > > > > > _____ > > From: serusers-bounces(a)lists.iptel.org [ > mailto:serusers-bounces@lists.iptel.org > <mailto:serusers-bounces@lists.iptel.org> ] On Behalf Of IpTel List > Sent: quinta-feira, 21 de Abril de 2005 8:19 > To: Iptel Mailing list > Subject: [Serusers] RE: Ser Crashes > > Hi! > > Thanx for help. It writes that he can't connect to MYSQL DB now ... > Output is the following ... > > root@ignosya:/usr/local/etc/ser# ser -E -d Listening on > 127.0.0.1 [127.0.0.1]:5060 > 84.230.194.213 [84.230.194.213]:5060 > 192.168.1.1 [192.168.1.1]:5060 > Aliases: 1.1.168.192.in-addr.arpa:5060 > a84-230-194-213.elisa-laajakaista.fi:5060 > localhost:5060 > root@ignosya:/usr/local/etc/ser# stateless - initializing Maxfwd > module- initializing > 0(15143) connect_db(): Can't connect to local MySQL server through > socket '/var/run/mysql/mysql.sock' (2) > 0(15143) db_init(): Error while trying to connect database > 0(15143) mod_init(): Error while connecting database > 0(15143) init_mod(): Error while initializing module usrloc > ERROR: error while initializing modules > > root@ignosya:/usr/local/etc/ser# > > So, it seams for me, that it's like MYSQL problem. > So, i have to reconfigure > it ... or check it up ... > But, are there any methods selecting mysql host adres? For example, if > mysql is not on local machine ... is it enough to set SQL_HOST var? > > Best wishes, > Alexandro. > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ -----Original Message----- From: harry gaillac [mailto:gaillacharry@yahoo.fr] Sent: quinta-feira, 5 de Maio de 2005 10:38 To: Elton Machado Subject: RE: [Serusers] RE: Ser Crashes Look at my ser.cfg do you add users in db with serctl ? Harry --- Elton Machado <elton.machado(a)gmail.com> a écrit : > And did you confirm if your mysql accept local > connection with user name and > password you are using? > > What do you mean by your authentication is working? > Can you provide us a > snip of your code? > > > > Regards, > > > > > > > > > > > > _____ > > From: Edgardo O. Gonzales II > [mailto:edgardo.g@pacific.net.ph] > Sent: sexta-feira, 29 de Abril de 2005 5:36 > To: Elton Machado; 'IpTel List'; 'Iptel Mailing > list' > Subject: RE: [Serusers] RE: Ser Crashes > > > > > I already did.. Im sure my username and password is > correct because my > authentication is working.. > any other suggestion .. > > At 06:17 AM 4/29/2005, Elton Machado wrote: > > > > Did you checked out well your configuration? > > You have to have something like... > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > #...... > modparam("auth_db|usrloc", "db_url", > "mysql://ser:heslo@localhost/ser") > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > modparam("usrloc", "db_mode", 2) > > to ser load things up from database, check if you > have the right username > and password, and if your mysql database is running. > > > > Regards, > > > > > > _____ > > From: serusers-bounces(a)lists.iptel.org [ > mailto:serusers-bounces@lists.iptel.org > <mailto:serusers-bounces@lists.iptel.org> ] On Behalf Of > IpTel List > Sent: quinta-feira, 21 de Abril de 2005 8:19 > To: Iptel Mailing list > Subject: [Serusers] RE: Ser Crashes > > Hi! > > Thanx for help. It writes that he can't connect to > MYSQL DB now ... Output > is the following ... > > root@ignosya:/usr/local/etc/ser# ser -E -d > Listening on > 127.0.0.1 [127.0.0.1]:5060 > 84.230.194.213 [84.230.194.213]:5060 > 192.168.1.1 [192.168.1.1]:5060 > Aliases: 1.1.168.192.in-addr.arpa:5060 > a84-230-194-213.elisa-laajakaista.fi:5060 > localhost:5060 > root@ignosya:/usr/local/etc/ser# stateless - > initializing > Maxfwd module- initializing > 0(15143) connect_db(): Can't connect to local MySQL > server through socket > '/var/run/mysql/mysql.sock' (2) > 0(15143) db_init(): Error while trying to connect > database > 0(15143) mod_init(): Error while connecting > database > 0(15143) init_mod(): Error while initializing > module usrloc > ERROR: error while initializing modules > > root@ignosya:/usr/local/etc/ser# > > So, it seams for me, that it's like MYSQL problem. > So, i have to reconfigure > it ... or check it up ... > But, are there any methods selecting mysql host > adres? For example, if mysql > is not on local machine ... is it enough to set > SQL_HOST var? > > Best wishes, > Alexandro. > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

[Serusers] RE: Ser Crashes
by IpTel List 05 May '05

05 May '05

Hi! Thanx for help. It writes that he can't connect to MYSQL DB now ... Output is the following ... root@ignosya:/usr/local/etc/ser# ser -E -d Listening on 127.0.0.1 [127.0.0.1]:5060 84.230.194.213 [84.230.194.213]:5060 192.168.1.1 [192.168.1.1]:5060 Aliases: 1.1.168.192.in-addr.arpa:5060 a84-230-194-213.elisa-laajakaista.fi:5060 localhost:5060 root@ignosya:/usr/local/etc/ser# stateless - initializing Maxfwd module- initializing 0(15143) connect_db(): Can't connect to local MySQL server through socket '/var/run/mysql/mysql.sock' (2) 0(15143) db_init(): Error while trying to connect database 0(15143) mod_init(): Error while connecting database 0(15143) init_mod(): Error while initializing module usrloc ERROR: error while initializing modules root@ignosya:/usr/local/etc/ser# So, it seams for me, that it's like MYSQL problem. So, i have to reconfigure it ... or check it up ... But, are there any methods selecting mysql host adres? For example, if mysql is not on local machine ... is it enough to set SQL_HOST var? Best wishes, Alexandro.

3 3

[Serusers] How to ensure accounting always
by Deepak Singhal 05 May '05

05 May '05

Is there a way to ensure that accounting information is written always. What I mean is if for example due to some reason accounting server is non contactable then the call should not mature. How can I achieve this ? Thanxs Deepak Singhal

1 0

[Serusers] accounting through MySQL
by Victor Huertas Garcia 05 May '05

05 May '05

Hi all again, I am executing the SER 0.8.14 for Linux (SuSE 8.2). I am generating some accouting through a syslog server and it works fine. However, I want to change it to MySQL. According to the user manual, I am supposed to edit a Makefile located in the acc file. The problem is that I cannot find this Makefile at all. I have downloaded all the SW package of SER and there is no acc file with the Makefile inside. It is weird... Any idea? Thanks in advance Victor Victor

2 3

[Serusers] SIP Testing
by Edgardo O. Gonzales II 05 May '05

05 May '05

Hi Guys! My location is Philippines and Im trying to make a gateway to gateway connection for my voip. We have a direct DS3 link going to US. Can somebody help me with the said testing .. Send me the details if ever you are interested . thanks, ed

1 0

[Serusers] serweb and php
by "Sebastian Kühner" 05 May '05

05 May '05

Hello, I have installed serweb and I made all the settings which are required (there are two different ways to install it, because the instructions on the iptel-Server are different from the instructions in the INSTALL file). When I want to load the index.php-File there appears an empty site. To make a test I put "phpinfo()" to the command lines of index.php... without result. A test.php-File in the same directory works fine. Has anyone an idea? Thanks! Sebastian -- +++ Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS +++ GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail

2 1

[Serusers] DDos
by Iqbal 04 May '05

04 May '05

Hi Hypothetically I guess random INVITE, REGISTER requests can be sent to SER (or any proxy for that matter). If this is detected or alot of false requests, does anyone know if they can be filtered within SER itself, i.e /dev/null all REGISTER requests which match xyz pattern. Iqbal

2 1

[Serusers] audiocodes and NO REGISTER
by Iqbal 04 May '05

04 May '05

Hi IS it possible in SER to accept calls which just auth from a particular IP address, if so what is the downside, in terms of doing billing etc. Iqbal

1 0

[Serusers] xmlrpc module
by harry gaillac 04 May '05

04 May '05

Hello, I'm looking for documentation on xmlrpc module . Anybody could tell me more about it ? Regards Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

[Serusers] I need to alter and duplicate REGISTER saves
by Jerome Martin 04 May '05

04 May '05

Hello everyone, After looking everywhere in the docs and ML archives, I couldn't find a way to solve my problem, so I would appreciate any help. We have several iPBX servers sending REGISTERs to a SER registrar. Some of those servers send us the numbers to register as aor in the form 0XXXXXXXXX (local numbering plan), some other in the form 33XXXXXXXXX (local country code prefix). For various reasons, we need to handle those different REGISTERs simultaneously, and be able to lookup both formats in the location database. What I'm looking for is a way to "duplicate" the REGISTER entries, i.e. when ser receives a REGISTER for 33XXXXXXXXX, I'd like it to save() the 33XXXXXXXXX, but also create an entry for the corresponding 0XXXXXXXXX. Example : SER receives a REGISTER request for 33122334455. I'd like to have two aors in the location database, so that lookup("33122334455") and lookup("0123344556") would both return the same thing. What I have in mind is something like this : if (method=="REGISTER") { # Always save the original aor save("location"); # If the number starts with 33, also save a duplicate aor in the 0XXXXXXXXX format if (search("^From.*sip:33.*")) { # Insert some code to alter the received SIP message and change the # number in order to save the 0XXXXXXXXX aor # ... # ... # ... save("location"); break; } break; }; Can anyone help ? Best Regards, Jerome Martin

3 2

Re: [Serusers] I need to alter and duplicate REGISTER saves
by Jerome Martin 04 May '05

04 May '05

Hi, Thanks for your reply. Alan Litster wrote: >Doing it the way you've suggested would mean modifying the From and To > > Indeed. I already tried that, using the replace() / replace_all() textops functions, but I could not even manage to have the header modified. It just did nothing at all .... Besides, in the recent thread Re: [Serusers] HF replace, someone said that modifying From: and To "is not allowed". But I am wondering ... ain't it the "Contact:" header which is used by register.so/usrloc.so ? >fields, then doing a save. This should in theory all the UAC to register on >the two addresses, it could get a little messy. > > I agree. I anticipate a few issues on that side. >An alternative would be to create an alias, this would be fine if you knew >before hand what format they would register with. > > Well, I know which server will send what format, and I can afford to hardcode the IPs in the ser.cfg. But after reading the section about aliases in the ser Admin's manual, I must confess it is not clear for me. Could you elaborate on that idea ? >>-----Original Message----- >>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On >>Behalf Of Jerome Martin >>Sent: 04 May 2005 15:16 >>To: serusers(a)lists.iptel.org >>Subject: [Serusers] I need to alter and duplicate REGISTER saves >> >> >>Hello everyone, >> >>After looking everywhere in the docs and ML archives, I couldn't find a >>way to solve my problem, so I would appreciate any help. >> >>We have several iPBX servers sending REGISTERs to a SER registrar. Some >>of those servers send us the numbers to register as aor in the form >>0XXXXXXXXX (local numbering plan), some other in the form 33XXXXXXXXX >>(local country code prefix). For various reasons, we need to handle >>those different REGISTERs simultaneously, and be able to lookup both >>formats in the location database. >> >>What I'm looking for is a way to "duplicate" the REGISTER entries, i.e. >>when ser receives a REGISTER for 33XXXXXXXXX, I'd like it to save() the >>33XXXXXXXXX, but also create an entry for the corresponding 0XXXXXXXXX. >> >>Example : SER receives a REGISTER request for 33122334455. I'd like to >>have two aors in the location database, so that lookup("33122334455") >>and lookup("0123344556") would both return the same thing. >> >>What I have in mind is something like this : >> >>if (method=="REGISTER") { >> # Always save the original aor >> save("location"); >> >> # If the number starts with 33, also save a duplicate aor in the >>0XXXXXXXXX format >> if (search("^From.*sip:33.*")) { >> >> # Insert some code to alter the received SIP message and change the >> # number in order to save the 0XXXXXXXXX aor >> # ... >> # ... >> # ... >> >> save("location"); >> break; >> } >> break; >>}; >> >>Can anyone help ? >> >>Best Regards, >>Jerome Martin >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> > >--------------------------------------------------------------------------------------------- >This email, and any files transmitted with it, is copyright and may contain confidential information. >The contents are intended for the use of the addressee(s) only. >Unauthorized use may be unlawful. >If you receive this email by mistake, please advise sender immediately. >The views of the author may not necessarily constitute the views of the company. >Nothing in this mail shall bind the company in any contract or obligation. > >Tel +44 (0) 20 8002 6000 >Fax +44 (0) 20 8002 6060 > >______________________________________________________________________ >This email has been scanned by the MessageLabs Email Security System. >For more information please visit http://www.messagelabs.com/email >______________________________________________________________________ > >

1 0

[Serusers] SER useing XXL extension
by harry gaillac 04 May '05

04 May '05

How can we setup XXL extension in SER ? Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

BUGFIX in lookup.c ... was [Serusers] zombie status in location table
by Cesc Santasusana 04 May '05

04 May '05

Hi, I think i found it! I attach three files ... the most important i think is lookup.c.registered_func.c. It contains a modified version of registered() function in lookup.c (registrar module), in which after obtaining the urecord from the database, all the contacts that it contains are checked for validity (which was not done before!!). I think that this is the cause of lookup and registered not returning the same values. Lookup() returned the correct value, registered() did not. Now, they both return the same ... i mean ... they both return the correct value :) The problem was small, in the transition period (in db_mode=1) when the user deregisters and SER still has not erased the contact from the location table (it keeps it in CS_ZOMBIE_S in mode=1, _D in mode=2). The other two files are a dump of the location table and a piece of the SER log file. Version is 0.9.0. Regards, Cesc >>> Jan Janak <jan(a)iptel.org> 04/29/05 03:08PM >>> On 28-04-2005 17:03, Cesc Santasusana wrote: > Hi, > > After de-registration, a contact in the location table is marked as zombie, and after some time, it is deleted from the table. Right? You should not see any contacts in a ZOMBIE_* state. zombie states were used for user location replication some time ago with a special module. If you use db_mode 2 then the contacts should appear as SYNC or DIRTY in the location table and they will be deleted after a while by timer. > Ok, what happens when this user receives a call ... i mean, he is in the location table (as zombie), but he is not registered really on the phone? He will not receive the message, because in the memory cache the contact is marked as deleted. > What do the lookup('location") and registered('location") in this scenario return? If the user does not have any other contact registered then they will return a negative value. > In my config ... a first call to lookup(loc) returns false, and then calling registered(loc) returns true. Is that right? Shouldn't the two functions do the same, just lookup rewrites the uri? They should return the same value. If that does not happen then there is a bug somewhere, in which case I would like to ask you to provide me with more information (SER version, dump of the location table, and so on). Jan. Unclassified

2 1

Re: [Serusers] 0.9.0 Compile Problems on Debian Sarge
by harry gaillac 04 May '05

04 May '05

ok untar ser sources in debian directory update changelog file you need fakeroot bison dpkg-dev libmysql*-dev libradius1-dev packages use aptitude for dep harry --- Ozan Blotter <cosmocid(a)ispro.net.tr> a écrit : > Hi Harry, > > > I'm new on Debian :( i need a step by step > instructions i believe... > cab you please tell me exact commands with filenames > for Installation on > Debian Sarge. > > I have 0.9.0 Source Tar.Gz and want to support MySql > & Radius together. > > FreeRadius, MySql and other libraries regarding to > SER is installed and > ready to use. > > Thanks, > Ozan > > > ----- Original Message ----- > From: "harry gaillac" <gaillacharry(a)yahoo.fr> > To: "Ozan Blotter" <cosmocid(a)ispro.net.tr> > Sent: Wednesday, May 04, 2005 5:36 PM > Subject: Re: [Serusers] 0.9.0 Compile Problems on > Debian Sarge > > > > Hello, > > > > Try make deb in order to build packages > > > > Harry > > --- Ozan Blotter <cosmocid(a)ispro.net.tr> a écrit: > >> I'm on Debian Sarge, i want to build SER modules, > >> radius and mysql and > >> jabber in one time. With Mandrake and Red Hat > there > >> was no problem but now > >> experiencing difficulties with Debian and can't > find > >> information regarding > >> to this... > >> > >> rapid:/ser-0.9.0# make modules=modules/mysql > modules > >> >> it's done without > >> problems :) > >> > >> rapid:/ser-0.9.0# make > modules=modules/auth_radius > >> modules > >> > >> > >> make[1]: Entering directory > >> `/ser-0.9.0/modules/auth_radius' > >> make[1]: Leaving directory > >> `/ser-0.9.0/modules/auth_radius' > >> make[1]: Entering directory > >> `/ser-0.9.0/modules/auth_radius' > >> gcc -fPIC -DPIC -g -O9 -funroll-loops > -Wcast-align > >> -Wall -minline-all-stringops > >> -malign-double -falign-loops -mcpu=athlon > >> -DNAME='"ser"' -DVERSION='"0.9.0"' > >> -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc > >> 3.3"' -D__CPU_i386 -D__OS_linux > >> -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC > >> -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 > >> -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE > >> -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT > >> -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 > >> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD > >> -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL > >> -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c > authorize.c > >> -o authorize.o > >> gcc -fPIC -DPIC -g -O9 -funroll-loops > -Wcast-align > >> -Wall -minline-all-stringops > >> -malign-double -falign-loops -mcpu=athlon > >> -DNAME='"ser"' -DVERSION='"0.9.0"' > >> -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc > >> 3.3"' -D__CPU_i386 -D__OS_linux > >> -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC > >> -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 > >> -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE > >> -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT > >> -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 > >> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD > >> -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL > >> -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c > >> authrad_mod.c -o authrad_mod.o > >> authrad_mod.c: In function `mod_init': > >> authrad_mod.c:110: error: `DICT_VENDOR' > undeclared > >> (first use in this > >> function) > >> authrad_mod.c:110: error: (Each undeclared > >> identifier is reported only once > >> authrad_mod.c:110: error: for each function it > >> appears in.) > >> authrad_mod.c:110: error: `vend' undeclared > (first > >> use in this function) > >> authrad_mod.c:134: warning: assignment makes > pointer > >> from integer without a > >> cast > >> authrad_mod.c:139: error: too many arguments to > >> function `rc_conf_str' > >> authrad_mod.c:139: error: too many arguments to > >> function > >> `rc_read_dictionary' > >> authrad_mod.c:144: warning: implicit declaration > of > >> function > >> `rc_dict_findvend' > >> authrad_mod.c:159: error: too many arguments to > >> function `rc_dict_findattr' > >> authrad_mod.c:159: error: too many arguments to > >> function `rc_dict_findval' > >> make[1]: *** [authrad_mod.o] Error 1 > >> make[1]: Leaving directory > >> `/ser-0.9.0/modules/auth_radius' > >> rapid:/ser-0.9.0# > >> > >> _______________________________________________ > >> Serusers mailing list > >> serusers(a)lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > >> > > > > > > > > > > > > > > > __________________________________________________________________ > > Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace > de stockage pour vos > > mails ! > > Créez votre Yahoo! Mail sur > http://fr.mail.yahoo.com/ > > __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

Re: [Serusers] Re: [Serdev] Problem with Via Branch/Strange Looping Problem with ACK's
by Alex Mack 04 May '05

04 May '05

Hi Zeus! Zeus Ng schrieb: >First, the ACK should follow section 12.2 (indeed 12.2.1.1), Requests within >a Dialog, not section 12.1.2 according to section 13.2.2.4, 2xx Responses. >------ >The UAC core MUST generate an ACK request for each 2xx received from >the transaction layer. The header fields of the ACK are constructed >in the same way as for any request sent within a dialog >------ > > I disagee: the SER is an UAS not an UAC. IMHO, the concernig chapters are 16.6 subpoint 8 ("16.6 Request Forwarding"; "8. Add a Via header field value") and 8.1.1.7 ("8.1.1.7 Via"). Both chapters state the UAS (SER) MUST add a Via with a branch parameter starting with the magic cookie "z9hG4bK". The ACK generated by the UAC looks good to me, anyway. >Second, do you happened to have a line like this in your SER config. > > aliase=your_proxy_name:5080 or aliase=your_proxy_ip:5080? > > > Are you sure about the trailing 'e' in "aliase"? I've two alias-definitions (one for the IP, one for the realm) in my ser.cfg. But they don't have the port added. I've already added the ports in the listen statements. Alex Mack

2 3

Re: [Serusers] Re: [Serdev] Patched free-TLS implementation
by Cesc Santasusana 04 May '05

04 May '05

Hi again, While checking on how to solve this problem, i saw a couple of things. 1 ================== in the same file and function (tls/tls_init.c, function init_ssl_ctx_behavior), there are a couple of log( 2, "CESC: TLS ... statements which i forgot to clean up :D You may want to remove the CESC: ... and maybe turn them into DBG calls .... Aaaaahhh ... if we had a CVS :D 2 ================== I added a feature that allows you to restrict what ciphers are to be used for TLS. I see two main uses for this. First, to allow only highly secure, non-anonymous ciphers (AES with RSA/DSA auth). Or second, for testing purposes, using a NULL encryption algorithm (this way user data can be read ... not in a very nice way in ethereal, but at least read). How to configure this? In my config file i have: listen=tls:IP_LOCAL_SERtcp_accept_aliases = yes tls_certificate="INSTALL_PATH/certs/ser_cert.pem"tls_private_key="INSTALL_PATH/private/ser_prik.pem"tls_ca_list="INSTALL_PATH/certs/ca_list.pem" tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" Note the "tls_ciphers_list" variable. I have set it to use NULL-SHA, so traffic gets authenticated but not encrypted (i do testing). Other possible lists are: SSL_CIPHERS_DEFAULT (this are the ones that are allowed if no tls_ciphers_list is specified, they are the default ones used by OpenSSL). "DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA:DES-CBC3-MD5:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:RC2-CBC-MD5:DHE-DSS-RC4-SHA:RC4-SHA:RC4-MD5:RC4-MD5:RC4-64-MD5:EXP1024-DHE-DSS-DES-CBC-SHA:EXP1024-DES-CBC-SHA:EXP1024-RC2-CBC-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:DES-CBC-MD5:EXP1024-DHE-DSS-RC4-SHA:EXP1024-RC4-SHA:EXP1024-RC4-MD5:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-RC2-CBC-MD5:EXP-RC4-MD5:EXP-RC4-MD5" SSL_CIPHERS_AES_HIGH_MEDIUM (this are AES only ciphers, not anonymous, with high and medium security level) "DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA" SSL_CIPHERS_TESTING (of course ... the testing list! the NULL ones are usually not available, so depends on the phone, u won't be able to do this) "NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" YET_ANOTHER_LIST (this includes high and medium security algorithms, some without authentication, and a variety of ciphers, not just AES) "ADH-AES256-SHA:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:ADH-AES128-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:DHE-DSS-RC4-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA:RC4-SHA:RC4-MD5:ADH-DES-CBC3-SHA:ADH-RC4-MD5:DES-CBC3-MD5:RC2-CBC-MD5:RC4-MD5" Regards, Cesc >>> Alex Mack <amack(a)fhm.edu> 05/04/05 02:01PM >>> >Hi Cesc! > >I compiled in your patch. > >Now I'm facing a new problem: SER wants a client certificate from the >UA. Snom phones immediately reply with an ALERT and break up connection >upon the certificate requests. MS Messenger on the other hand sends at >least a reply - without certificate - and SER rejects the Client Hello >because of the missing client certificate: > >tls_accept: Error in SSL: >tls_error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer >did not return a certificate > >Could you please provide some more documentation about the new TLS >options you added? It seems you've implemented support for client >certificates for a two-way certificate authorization - which would be a >good thing if supported by the UAs, which don't right now. So how can I >turn it off again and get back to server side certification? > >Alex Mack >Cesc Santasusana schrieb: >Hi everybody, > >The last i sent is a replacement as a whole for the original code sent by P. Griffiths. Sorry i forgot to mention that. > >The patches for cfg.y and cfg.lex are both in the same file (patch.core.cfg..files.diff) within the zip. I was lazy :) >I resent it as a whole, and not as a diff, because i indented all the code with tabs, instead of spaces (so a diff would be bigger than just sending all the files). > >As for the CVS thing ... i agree with Juha. Either gets into the "official" cvs or we do something about it. The code i think is rather stable as it is (i only tested on my debian linux box, soon i will try on an ARM linux and i will report back on that too). For me, as long as it gets into a CVS, i don't care if it is mantained against HEAD or 0.9.0 (i use 0.9.0 .... so all my patches are against it). > >On a more philosophical level, i understand the "quietness" on iptel's side ... they have their own version, and make money on it. But the thing is that this free version is here to stay ... it is the "problem" of opensource. >Another option would be for them to release their proprietary implementation if they feel that it is a better, more tested one. >In any case, i think that this whole thing needs to be decided fast. > >Regards! > >Cesc > > > > >>>>Alex Mack <amack(a)fhm.edu> 05/03/05 01:26PM >>> >>>> >Hi Cesc! > >Nice to have those fixes in a package. > >Is your cfg.y-patch to be applied *after* cfg.y.patch was applied or >*instead* of cfg.y.patch? > >Or is your version a patched one which replaces the original >implementation as a whole? In that case where's cfg.lex.patch? > >Alex Mack > >Cesc Santasusana schrieb: > > >>Hi, >> >>I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). >> >>Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). >> >>Enjoy! >> >>Cesc >> >> Unclassified > >> >> >>------------------------------------------------------------------------ >> >>_______________________________________________ >>Serdev mailing list >>serdev(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serdev >> >> >> > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > >

1 0

[Serusers] serweb
by harry gaillac 04 May '05

04 May '05

hello, Anybody could tell me more about ser+serweb+xml-rpc ? when i set true (config.php) my_account.php page failed . Harry /* This option is enabling checkbox 'Allow others to see whether or not I'm online'*/ $config->allow_change_status_visibility=false; /* Forwarding to voicemail by group membership. If set to false,is forwarding to voicemail done through admin privileges */ $config->forwarding_to_voicemail_by_group=false; __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

Re: [Serusers] Re: [Serdev] Patched free-TLS implementation
by Cesc Santasusana 04 May '05

04 May '05

Hi, Yeah ... I send it with my default config which is using client and server authentication. I use this settings with minisip client (supports client side certs) and for tls between ser proxies. It works perfect. To turn client authentication off, check: tls/tls_init.c file init_ssl_ctx_behavior function the line SSL_CTX_set_verify( _ctx, SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT, 0); means that the server will request a certificate from the client and if it doesn't get one, it will fail. Try changing it with: SSL_CTX_set_verify( _ctx, SSL_VERIFY_PEER | SSL_VERIFY_CLIENT_ONCE, 0); this way the server will request a cert, the client will not provide, but on the following renegotiation, the server (ser) will not ask for a cert. And if you want to turn verification off ... completely ... SSL_CTX_set_verify( _ctx, SSL_VERIFY_NONE, 0); this will also work for you if only using tls for ser2phone ... it will not work if you want tls between proxies ... as the ser client will accept ANY certificate from the ser server. And then, from the prompt: > make TLS=1 all && make TLS=1 install ;) This whole verification thing needs to be improved and probably the parameters should be changeable directly from the config file. This and many other parameters should be exchangeable without the need to recompile. Any volunteer for a ser-tls.README? :D Can you provide me with some extra info from the snom phones and the messenger? Do it offline, so you can send me some ethereal captures and ser logs ... Regards, Cesc >>> Alex Mack <amack(a)fhm.edu> 05/04/05 02:01PM >>> Hi Cesc! I compiled in your patch. Now I'm facing a new problem: SER wants a client certificate from the UA. Snom phones immediately reply with an ALERT and break up connection upon the certificate requests. MS Messenger on the other hand sends at least a reply - without certificate - and SER rejects the Client Hello because of the missing client certificate: tls_accept: Error in SSL: tls_error: error:140890C7:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate Could you please provide some more documentation about the new TLS options you added? It seems you've implemented support for client certificates for a two-way certificate authorization - which would be a good thing if supported by the UAs, which don't right now. So how can I turn it off again and get back to server side certification? Alex Mack Cesc Santasusana schrieb: >Hi everybody, > >The last i sent is a replacement as a whole for the original code sent by P. Griffiths. Sorry i forgot to mention that. > >The patches for cfg.y and cfg.lex are both in the same file (patch.core.cfg..files.diff) within the zip. I was lazy :) >I resent it as a whole, and not as a diff, because i indented all the code with tabs, instead of spaces (so a diff would be bigger than just sending all the files). > >As for the CVS thing ... i agree with Juha. Either gets into the "official" cvs or we do something about it. The code i think is rather stable as it is (i only tested on my debian linux box, soon i will try on an ARM linux and i will report back on that too). For me, as long as it gets into a CVS, i don't care if it is mantained against HEAD or 0.9.0 (i use 0.9.0 .... so all my patches are against it). > >On a more philosophical level, i understand the "quietness" on iptel's side ... they have their own version, and make money on it. But the thing is that this free version is here to stay ... it is the "problem" of opensource. >Another option would be for them to release their proprietary implementation if they feel that it is a better, more tested one. >In any case, i think that this whole thing needs to be decided fast. > >Regards! > >Cesc > > > > >>>>Alex Mack <amack(a)fhm.edu> 05/03/05 01:26PM >>> >>>> >Hi Cesc! > >Nice to have those fixes in a package. > >Is your cfg.y-patch to be applied *after* cfg.y.patch was applied or >*instead* of cfg.y.patch? > >Or is your version a patched one which replaces the original >implementation as a whole? In that case where's cfg.lex.patch? > >Alex Mack > >Cesc Santasusana schrieb: > > >>Hi, >> >>I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). >> >>Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). >> >>Enjoy! >> >>Cesc >> >> Unclassified > >> >> >>------------------------------------------------------------------------ >> >>_______________________________________________ >>Serdev mailing list >>serdev(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serdev >> >> >> > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > >

1 0

[Serusers] 0.9.0 Compile Problems on Debian Sarge
by Ozan Blotter 04 May '05

04 May '05

I'm on Debian Sarge, i want to build SER modules, radius and mysql and jabber in one time. With Mandrake and Red Hat there was no problem but now experiencing difficulties with Debian and can't find information regarding to this... rapid:/ser-0.9.0# make modules=modules/mysql modules >> it's done without problems :) rapid:/ser-0.9.0# make modules=modules/auth_radius modules make[1]: Entering directory `/ser-0.9.0/modules/auth_radius' make[1]: Leaving directory `/ser-0.9.0/modules/auth_radius' make[1]: Entering directory `/ser-0.9.0/modules/auth_radius' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c authorize.c -o authorize.o gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -I/ser-0.9.0/include -c authrad_mod.c -o authrad_mod.o authrad_mod.c: In function `mod_init': authrad_mod.c:110: error: `DICT_VENDOR' undeclared (first use in this function) authrad_mod.c:110: error: (Each undeclared identifier is reported only once authrad_mod.c:110: error: for each function it appears in.) authrad_mod.c:110: error: `vend' undeclared (first use in this function) authrad_mod.c:134: warning: assignment makes pointer from integer without a cast authrad_mod.c:139: error: too many arguments to function `rc_conf_str' authrad_mod.c:139: error: too many arguments to function `rc_read_dictionary' authrad_mod.c:144: warning: implicit declaration of function `rc_dict_findvend' authrad_mod.c:159: error: too many arguments to function `rc_dict_findattr' authrad_mod.c:159: error: too many arguments to function `rc_dict_findval' make[1]: *** [authrad_mod.o] Error 1 make[1]: Leaving directory `/ser-0.9.0/modules/auth_radius' rapid:/ser-0.9.0#

1 0

[Serusers] SER 0.9.0 on Debian Sarge (Compiling Problems)
by Ozan Blotter 04 May '05

04 May '05

I want both Mysql & Radius Modules on SER 0.9.0, just changed system into Debian Sarge, i have all libraries and rest of reqs as it says, while compiling on Red Hat 9.0 - ES 3.0 - CentOS or Mandrake 9.1 - 10.0 it never happened but now on Debian i meet below problems :( static_modules= static_modules_path=$(addprefix modules/, $(static_modules)) extra_sources=$(wildcard $(addsuffix /*.c, $(static_modules_path))) extra_objs=$(extra_sources:.c=.o) static_defs= $(foreach mod, $(static_modules), \ -DSTATIC_$(shell echo $(mod) | tr [:lower:] [:upper:]) ) override extra_defs+=$(static_defs) $(EXTRA_DEFS) export extra_defs modules=$(filter-out $(addprefix modules/, \ $(exclude_modules) $(static_modules)), \ <<<<<<<<<<<<<<<<<<<<<< this is line 77 <<<<<<<<<<< $(wildcard modules/*)) modules:=$(filter-out $(modules), $(addprefix modules/, $(include_modules) )) \ $(modules) modules_names=$(shell echo $(modules)| \ sed -e 's/modules\/$[^/ ]*$\/*/\1.so/g' ) modules_basenames=$(shell echo $(modules)| \ sed -e 's/modules\/$[^/ ]*$\/*/\1/g' ) #modules_names=$(patsubst modules/%, %.so, $(modules)) modules_full_path=$(join $(modules), $(addprefix /, $(modules_names))) rapid:/ser-0.9.0# make modules=modules/mysql modules make[1]: Entering directory `/ser-0.9.0/modules/mysql' ../../Makefile.rules:77: dbase.d: No such file or directory ../../Makefile.rules:77: db_con.d: No such file or directory ../../Makefile.rules:77: db_mod.d: No such file or directory ../../Makefile.rules:77: my_con.d: No such file or directory ../../Makefile.rules:77: my_id.d: No such file or directory ../../Makefile.rules:77: my_pool.d: No such file or directory ../../Makefile.rules:77: res.d: No such file or directory ../../Makefile.rules:77: row.d: No such file or directory ../../Makefile.rules:77: utils.d: No such file or directory ../../Makefile.rules:77: val.d: No such file or directory make[1]: Leaving directory `/ser-0.9.0/modules/mysql' make[1]: Entering directory `/ser-0.9.0/modules/mysql'

1 0

[serusers] problem to register
by michael p 04 May '05

04 May '05

hi when i try to start my registration there is this error appears in the log diagnostic of my UAC: 4:32:06.8 Proxy slot #0 () - Failed to register! error-code: 401, msg: 'Unauthorized'. Retry in 40 second(s). AOR: '<sip:michael@toto.koko.com>', proxy: toto.koko.com', firewall-proxy: 'F'. i don't understand thanks

2 1

[Serusers] pstn phone keeps ringing!!!
by Llanos Serna García-Conde 04 May '05

04 May '05

2 1

[Serusers] Re: [Serdev] Patched free-TLS implementation
by Cesc Santasusana 04 May '05

04 May '05

Hi everybody, The last i sent is a replacement as a whole for the original code sent by P. Griffiths. Sorry i forgot to mention that. The patches for cfg.y and cfg.lex are both in the same file (patch.core.cfg..files.diff) within the zip. I was lazy :) I resent it as a whole, and not as a diff, because i indented all the code with tabs, instead of spaces (so a diff would be bigger than just sending all the files). As for the CVS thing ... i agree with Juha. Either gets into the "official" cvs or we do something about it. The code i think is rather stable as it is (i only tested on my debian linux box, soon i will try on an ARM linux and i will report back on that too). For me, as long as it gets into a CVS, i don't care if it is mantained against HEAD or 0.9.0 (i use 0.9.0 .... so all my patches are against it). On a more philosophical level, i understand the "quietness" on iptel's side ... they have their own version, and make money on it. But the thing is that this free version is here to stay ... it is the "problem" of opensource. Another option would be for them to release their proprietary implementation if they feel that it is a better, more tested one. In any case, i think that this whole thing needs to be decided fast. Regards! Cesc >>> Alex Mack <amack(a)fhm.edu> 05/03/05 01:26PM >>> Hi Cesc! Nice to have those fixes in a package. Is your cfg.y-patch to be applied *after* cfg.y.patch was applied or *instead* of cfg.y.patch? Or is your version a patched one which replaces the original implementation as a whole? In that case where's cfg.lex.patch? Alex Mack Cesc Santasusana schrieb: >Hi, > >I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). > >Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). > >Enjoy! > >Cesc > Unclassified > > > >------------------------------------------------------------------------ > >_______________________________________________ >Serdev mailing list >serdev(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serdev > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

Re: [Serusers] setflag...max number
by Cesc Santasusana 04 May '05

04 May '05

Hi, I think there is also a module (gflags) which allows more flags (not sure), and that has a fifo interface. I think it is not completely finished, but may work. The description of it in the c file: * gflags module: global flags; it keeps a bitmap of flags * in shared memory and may be used to change behaviour * of server based on value of the flags. E.g., * if (is_gflag("1")) { t_relay_to_udp("10.0.0.1","5060"); } * else { t_relay_to_udp("10.0.0.2","5060"); } * The benefit of this module is the value of the switch flags * can be manipulated by external applications such as web interface * or command line tools. Cesc >>> Iqbal <iqbal(a)gigo.co.uk> 05/03/05 07:43PM >>> so if I want to set more than 31 flags, what do I do Iqbal Cesc Santasusana wrote: >no ... flags are stored in a 32-bit integer, each flag being one of the bits (set or reset), so u have flags 0 to 31 to set. > >cesc > > > >>>>Iqbal <iqbal(a)gigo.co.uk> 05/03/05 05:08PM >>> >>>> >>>> >Hi > >Is there a max number, I set one at 51, and got an error, is this a >feature.. > >Iqbal > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers Unclassified > > >. > > >

1 0

[Serusers] Load/stress test on SER server
by Onur Devran Cakir 04 May '05

04 May '05

I am looking for a software for challanging the load limits of preinstalled SER server. There are both free (i.e. sip bomber) and priced (i.e. winsip) products. Free products are installed on Linux platforms, but the others can be setup on windows. If you know such programs, please inform me about the test results and your experience on those products. Any other software will be beneficial for me.. Thanks, Dev __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Serusers] Failure_route and Current URI Set
by Aaron W 04 May '05

04 May '05

I want to allow users to have multiple numbers that they can be found at. For example, I want to have SER ring my SIP phone first, then my cell phone, then department admin, and finally my voicemail. However, a different user may want to first ring his sip phone, then Dave's SIP phone and then to voice mail. I created a custom table called "followme" and in it I have two columns, username and newusername. In my failure_route[1] I call exec_dset("junk(a)junk.com;/etc/ser/follow $USER") and it will return the correct value. This works pretty well as long as the returned value is an external number that I pass off to the PBX. However, I want to be able to do one of two things. 1) I want to run the returned value through Lookup(location) 2) I want to have condition statements based on the returned URI. For example I want to have: if (uri =~"^xyz@) I think the issue is that the exec_dset really does an append branch, so that the original URI is not changed. I already have found taht I need the junk(a)junk.com in my exec_dset command so taht SER recongizes a new branch. But how can I work with that branch? I hope this makes sense.... Aaron

2 1

Re: [Serusers] HELP: how to get correct call duration??
by Charles Wang 04 May '05

04 May '05

Hi, I think that the ACK after INVITE is only the callee(UAC) receives my INVITE and ready to start RINGING. But this time is not the really Call Start. Generally, the start time of call should be callee hangup the phone after ringing. Do you have any idea about it? On 4/28/05, info(a)beeplove.com <info(a)beeplove.com> wrote: > > Actually, to get call duration, you need to use ACK and BYE (both should > have status 200). > INVITE sends an request to other party to initiate a call. > Other party send ACK with status 200 to receive the call. > > Original Message: > ----------------- > From: Charles Wang lazy.charles(a)gmail.com > Date: Thu, 28 Apr 2005 02:49:42 +0800 > To: serusers(a)lists.iptel.org > Subject: [Serusers] HELP: how to get correct call duration?? > > > Hi, ALL: > > I know ser can insert INVITE & BYE records to acc table. > Maybe the timestamp of BYE record is correct but the timestamp > of INVITE is not equal to the call start(after the callee answered). > Is there any method to generate a record with timestamp when the callee > answer? > I think that it should be the callee responses "200 OK" after "100 Trying". > How to do it??? > > -- > > Best Regards > Charles > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > -- Best Regards Charles

2 6

[Serusers] List of authorized UAs, how?
by Enrique Vadillo 03 May '05

03 May '05

Hi all, I'd like to know if there's some way i can have a list of authorized UAs i am willing to deal with -rejecting all others- using SER. I have noticed that there are some broken UAs like X-Pro v2 and surely some others, that don't even send the BYE and there's no way i can have reliable accounting with those UAs. If anyone has found a way to do this, or has some patch, please lemme know. Thanks in advance! Enrique Vadillo.

2 1

[Serusers] Getting Started - Issue 4 covers PSTN Gateway Support
by Simon Miles 03 May '05

03 May '05

Dear All, After a month and over 200 downloads, we have updated the Getting Started documentation. We now cover in-depth description of supporting PSTN gateways as well as updating some bugs that we had previously found. So please download the new version 4 ! ! <http://www.ONsip.org> www.ONsip.org Feedback we have so far received is very positive and we hope that by sharing with you our own experiences we are making the SER community wider and more knowledgeable. Regards Paul, Simon, Greger

1 0

[Serusers] Loose routing question
by Michael Ulitskiy 03 May '05

03 May '05

Hello, I'm trying to comprehend loose routing concept and I have a question that concerns me. As far as I understand loose routing says that if there're Route headers in a message it should be forwarded according to the URIs set in Route headers. I thought that this is true only within a dialog, but RFC3261 (part 16.6) says: "Requests establishing a dialog may contain a preloaded Route header field." Also SER manual says: " the failure not to include loose routing in your scripts may lead to infinite loops. Make sure that you include the following script fragment immediately after request sanity checks" and provide the following piece of code: if (loose_route()) { t_relay(); break; }; which as far as I understand unconditionally forwards message if Route header is present. So I'm wondering what about security? If I follow this guidelines how I would shield my PSTN gateway if anyone can construct message and pre-load it with URI of my gateway and all my proxies must honor it. For example I have a PSTN gateway on ip address 10.1.1.5 and proxy on 10.1.1.10 that supposed to interface outside world. So I guess if someone construct a message like this: INVITE sip:12345@somewhere.com SIP/2.0 ... Route: <sip:12345@10.1.1.5;lr> my proxy will forward it to PSTN gateway and it will make outbound call. Is this true? Please enlighten me on this. Thank you, Michael

7 20

[Serusers] permissions Module
by Leon Sun 03 May '05

03 May '05

Hi, Is anyone using permissions Module? I read docu from web and I have no idea about format of permission&deby files. Would anyone kindly provide this format? Great thanks. Leon Sun

2 2

RE: [serusers] mysql.so
by Ricardo Martinez 03 May '05

03 May '05

Michael. By "tar" you mean the rpm installation?. If so i'm not sure what to do, i'm sending this mail to the mail list to see if someone can give you a hand. Regards, Ricardo.- > -----Mensaje original----- > De: michael p [mailto:mikep3000@hotmail.com] > Enviado el: Martes, 03 de Mayo de 2005 12:17 > Para: rmartinez(a)redvoiss.net > Asunto: RE: [serusers] mysql.so > > > thanks but i didn't install ser with the source but with the tar > > so what can i do? > > thanks > > regards > > M. > > >From: Ricardo Martinez <rmartinez(a)redvoiss.net> > >To: 'michael p' <mikep3000(a)hotmail.com>, serusers(a)lists.iptel.org > >Subject: RE: [serusers] mysql.so > >Date: Tue, 3 May 2005 12:16:37 -0400 > > > >Hello > >You must re-compile you ser, but this time make sure you > edit the Makefile > >file in the line "exclude_modules?=" and remove mysql module. > >That should work. > > > >Regards, > >Ricardo.- > > > > > > > -----Mensaje original----- > > > De: michael p [mailto:mikep3000@hotmail.com] > > > Enviado el: Martes, 03 de Mayo de 2005 12:10 > > > Para: serusers(a)lists.iptel.org > > > Asunto: [serusers] mysql.so > > > > > > > > > hi > > > > > > i don't find the modules mysql.so that has to be in > > > /usr/lib/ser/modules > > > > > > i don't know it's not there > > > > > > i can't modify the file /etc/ser/ser.cfg cause this module > > > doesn't exist > > > > > > anyone knows why? > > > > > > where can i find it? > > > > > > thanks > > > > > > M. > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > >

2 1

[Serusers] ser and asterisk
by G.Marshall 03 May '05

03 May '05

I appreciate this has probably been asked time and time before, but I can not find any documentation on it which works in my situation. I have tried nathelper.cfg, rtp.cfg, al.cfg but to no avail. I have even tried home grown cfg's |---------sipsak for external registration | | rtpproxy \|/ + sip server <-> ser <-> asterisk ^ ^ | | \|/ \|/ sip phone mgcp/iax phone The ser and asterisk programs are running on the same box. This box has an external and internal interface. ser listens to 5060, asterisk sip listens to 5061. Internal phones connect to the internal interface of this box. I used fix_nated_contact to modify the contact header, however, looking at the xlog output this does not appear to be happenning. /usr/local/sbin/ser[7077]: time [Tue May 3 17:04:33 2005] method <REGISTER> r-uri <iptel.tgfslp.dalmany.co.uk> src_ip <192.168.4.5> contact header <Line A <sip:5561@192.168.4.5:5061>;expires=3600> Does anyone have any suggestions on how to fix this problem? Unfortunately, I need this setup to proxy rtp through the box. Many thanks, Spencer

1 0

[serusers] serctl
by michael p 03 May '05

03 May '05

hi everybody, anyone knows where is there a tutorial about serctl? i don't understand how to use it? i'm trying to enter some lines but when i do enter it doesn't happen things. that stays on serctl thanks

3 2

[Serusers] serweb
by "Sebastian Kühner" 03 May '05

03 May '05

Hello, I have a problem with serweb. When I load my page with http://192.168.1.223/iptel/admin/index.php always appears "error in SQL query, line: 30" On line 30 there is a following SQL-Request: select phplib_id from subscriber where username='root' and password='' and perms='admin' and domain='192.168.1.223' The problem that I saw now is that I don't have "perms" in my table subscriber? What is wrong? I'm using ser 0.9.0 and serweb 2004-7-24... Thanks! Sebastian -- +++ Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS +++ GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail

1 0

RE: [serusers] mysql.so
by Ricardo Martinez 03 May '05

03 May '05

Hello You must re-compile you ser, but this time make sure you edit the Makefile file in the line "exclude_modules?=" and remove mysql module. That should work. Regards, Ricardo.- > -----Mensaje original----- > De: michael p [mailto:mikep3000@hotmail.com] > Enviado el: Martes, 03 de Mayo de 2005 12:10 > Para: serusers(a)lists.iptel.org > Asunto: [serusers] mysql.so > > > hi > > i don't find the modules mysql.so that has to be in > /usr/lib/ser/modules > > i don't know it's not there > > i can't modify the file /etc/ser/ser.cfg cause this module > doesn't exist > > anyone knows why? > > where can i find it? > > thanks > > M. > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[serusers] mysql.so
by michael p 03 May '05

03 May '05

hi i don't find the modules mysql.so that has to be in /usr/lib/ser/modules i don't know it's not there i can't modify the file /etc/ser/ser.cfg cause this module doesn't exist anyone knows why? where can i find it? thanks M.

1 0

Re: [Serusers] connect to a pstn
by "Sebastian Kühner" 03 May '05

03 May '05

Where do I have to put the username, password (secret) while registering to a pstn with ser? Maybe that I can put it to my uri, but in this case I loose the telefone-number of the destination. Sorry, but I don't understand how to do this... maybe that I have to sleep a little bit more ;-) > You can register asterisk with SER and your > pstn-gateway with SER > > SER will forward call to pstn > --- "Sebastian Kühner" <SebastianKuehner(a)gmx.de> a > écrit: > > Hello, > > > > The problem of this example is, that the user has to > > register to ser before > > connecting to the pstn-gateway. But I have the > > problem that ser has to > > register to the pstn-gateway before passing the call > > (with the username, > > fromuser,... like above). The pstn.cfg only forwards > > to the pstn-gateway > > without registration... > > > > > hello, > > > > > > Look at pstn.cfg from ser sources > > > > > > Harry > > > --- "Sebastian Kühner" <SebastianKuehner(a)gmx.de> a > > > écrit: > > > > Hello, > > > > > > > > I am using asterisk to connect to a > > PSTN-Gateway. I > > > > have to register to this > > > > pstn gateway before passing calls with: > > > > > > > > [broadvoice] > > > > type=friend > > > > username=xxxxxxxxxxx > > > > fromuser=xxxxxxxxxx > > > > secret=xxxxxxxxxx > > > > host=sip.broadvoice.com > > > > port=5060 > > > > context=ext_default > > > > dtmfmode=inband > > > > fromdomain=sip.broadvoice.com > > > > canreinvite=no > > > > dtmfmode=inband > > > > insecure=very > > > > permit=xxx.xxx.xxx.xxx/32 > > > > qualify=yes > > > > > > > > > > > > Now I want to put through the calls with ser. > > Has > > > > anyone an idea how to do > > > > that in ser? > > > > > > > > Thanks! > > > > > > > > Sebastian > > > > > > > > -- > > > > +++ Neu: Echte DSL-Flatrates von GMX - Surfen > > ohne > > > > Limits +++ > > > > Always online ab 4,99 Euro/Monat: > > > > http://www.gmx.net/de/go/dsl > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > > > > > > > > > __________________________________________________________________ > > > > > Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace > > de stockage pour vos > > > mails ! > > > Créez votre Yahoo! Mail sur > > http://fr.mail.yahoo.com/ > > > > > > > -- > > +++ Lassen Sie Ihren Gedanken freien Lauf... z.B. > > per FreeSMS +++ > > GMX bietet bis zu 100 FreeSMS/Monat: > > http://www.gmx.net/de/go/mail > > > > > > > > > __________________________________________________________________ > Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos > mails ! > Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ > -- +++ Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS +++ GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail

1 0

Re: [Serusers] Loose routing question
by Juha Heinanen 03 May '05

03 May '05

Cesc Santasusana writes: > Fair enough, but then what do you do against fake BYE messages? If > you do not authenticate them somehow, anybody could sniff the INV > message (and OK/ACK), take the needed fields, and tear down the > session. there is very little you can do to prevent that unless you use tls for signaling. -- juha

1 0

[Serusers] sipsak problem
by rcrdsip rcrdsip 03 May '05

03 May '05

hello, i'm testing sipsak. ./sipsak -M -B "test " -s sip:dummy@X.X.X.2:5060 this command work well. Then i want to use the -f file option: ./sipsak -f test.txt -s sip:dummy@X.X.X.2:5060 with the file test.txt: MESSAGE sip:dummy@X.X.X.2:5060 SIP/2.0 From: <sip:sipsak@X.X.X.1> To: <sip:dummy@X.X.X.2:5060> Call-ID: <1234567(a)X.X.X.1> CSeq: 2 MESSAGE Content-Type: text/plain Content-Length: 5 User-Agent: sipsak 0.8.12 Line-based text data: text/plain test The command wait for 20s and finish with: ** give up retransmissioning.... and i don't capture any SIP messages with ethereal. A idea? thanks

2 1

Re: [Serusers] Loose routing question
by Cesc Santasusana 03 May '05

03 May '05

Fair enough, but then what do you do against fake BYE messages? If you do not authenticate them somehow, anybody could sniff the INV message (and OK/ACK), take the needed fields, and tear down the session. Of course, even if you protect against fake BYEs, there is still CANCEL messages, which according to the RFC cannot be challenged at all ... so maybe just drop them all? I am just thinking outloud on how to harden a sip system ... Cesc >>> Juha Heinanen <jh(a)tutpro.com> 05/03/05 04:07PM >>> Cesc Santasusana writes: > For example, Kphone can resend an INV if challenged which contains > the auth-data. On the other hand, if a kphone is the receiver of the > INV, and it hangs up, kphone generates a BYE message which does NOT > contain auth-data. Thus, ser will challlenge the kphone back, kphone > will reply with a CANCEL and resend the BYE without (again) the > auth-data, entering an endless loop. Ain't it funny? bye is not initial request, but in-dialog request. it doesn't make sense to authenticate them, because you may not even know if the sender of bye is your local user or not. for initial requests you always know this and thus can authenticate them. -- juha Unclassified

1 0

Re: [Serusers] Loose routing question
by Cesc Santasusana 03 May '05

03 May '05

I actually gave up trying to this kind of checks on routed messages. Why? Not all phones behave the same way and some had problems when authentication (digest) was required for messages different than INVITE. For example, Kphone can resend an INV if challenged which contains the auth-data. On the other hand, if a kphone is the receiver of the INV, and it hangs up, kphone generates a BYE message which does NOT contain auth-data. Thus, ser will challlenge the kphone back, kphone will reply with a CANCEL and resend the BYE without (again) the auth-data, entering an endless loop. Ain't it funny? By the way ... i notified this to kphone developers ... no news :( I repeat, i tried other phones and it worked fine: minisip, polycom hardphone (has many other bugs ...), snom, ... But i agree with Juha (and this makes it twice this afternoon) ... you should authenticate them as you would with any other message. Try using a phone which supports TLS and then you are good to go :) Regards, Cesc >>> Juha Heinanen <jh(a)tutpro.com> 05/03/05 11:58AM >>> >Klaus Darilion writes: > > > What would be a normal (out-of-dialog) check? > >the same checks you do for initial requests that don't have Route >header, i.e., check if domain of request uri is local, authenticate >caller if local, etc. > >-- juha > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers Unclassified

2 1

Re: [Serusers] Loose routing question
by Juha Heinanen 03 May '05

03 May '05

Cesc Santasusana writes: > For example, Kphone can resend an INV if challenged which contains > the auth-data. On the other hand, if a kphone is the receiver of the > INV, and it hangs up, kphone generates a BYE message which does NOT > contain auth-data. Thus, ser will challlenge the kphone back, kphone > will reply with a CANCEL and resend the BYE without (again) the > auth-data, entering an endless loop. Ain't it funny? bye is not initial request, but in-dialog request. it doesn't make sense to authenticate them, because you may not even know if the sender of bye is your local user or not. for initial requests you always know this and thus can authenticate them. -- juha

1 0

[Serusers] connect to a pstn
by "Sebastian Kühner" 03 May '05

03 May '05

Hello, I am using asterisk to connect to a PSTN-Gateway. I have to register to this pstn gateway before passing calls with: [broadvoice] type=friend username=xxxxxxxxxxx fromuser=xxxxxxxxxx secret=xxxxxxxxxx host=sip.broadvoice.com port=5060 context=ext_default dtmfmode=inband fromdomain=sip.broadvoice.com canreinvite=no dtmfmode=inband insecure=very permit=xxx.xxx.xxx.xxx/32 qualify=yes Now I want to put through the calls with ser. Has anyone an idea how to do that in ser? Thanks! Sebastian -- +++ Neu: Echte DSL-Flatrates von GMX - Surfen ohne Limits +++ Always online ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl

1 0

[Serusers] Re: [Serdev] Patched free-TLS implementation
by Alex Mack 03 May '05

03 May '05

Hi Cesc! Nice to have those fixes in a package. Is your cfg.y-patch to be applied *after* cfg.y.patch was applied or *instead* of cfg.y.patch? Or is your version a patched one which replaces the original implementation as a whole? In that case where's cfg.lex.patch? Alex Mack Cesc Santasusana schrieb: >Hi, > >I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). > >Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). > >Enjoy! > >Cesc > >Unclassified > > > >------------------------------------------------------------------------ > >_______________________________________________ >Serdev mailing list >serdev(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serdev > >

2 1

Re: [Serusers] Proxy-to-Proxy authentication
by Victor Huertas Garcia 03 May '05

03 May '05

Thank you very much for your answer, Cesc. Now I have an idea about this issue. Regards Victor >From: "Cesc Santasusana" <cesc.santasusana(a)nl.thalesgroup.com> >To: <vhuertas(a)hotmail.com>, <serusers(a)lists.iptel.org> >Subject: Re: [Serusers] Proxy-to-Proxy authentication >Date: Tue, 03 May 2005 10:53:06 +0200 > >Hi, > >TLS was meant exactly for that. The RFC specifies it as a hop by hop >security (auth + crypto) mechanism > >I think SER has a module that allows it to authenticate via Digest (UAC >module). I have not tried it, because with the availability of a free TLS >implementation for SER, and TLS being a mandatory feature for proxies ... >why go along with such an simple mechanism as digest? > >The only poblem many people see with using tls is that it requires a tcp >connection, thus for high traffic servers it may be a problem (though u can >use force_tcp_alias, and reuse the same socket for same P2P connections, >thus reducing the connection setup delay associated with tcp and specially >with tls). > >If tcp/tls is not an option in your network, then probably you could think >of IPSec (works for both tcp and udp) ... or maybe you want to implement >something fancier ... say ... tunnel SIP messages withing S/MIME protected >sip messages :D > >Regards, > >Cesc > > >>> "Victor Huertas Garcia" <vhuertas(a)hotmail.com> 05/02/05 06:01PM >>> > > >Hi all! > >I'm newie in this mailing list and I am working with SER at this momen in a >project. > >However I have a doubt I would like to clarify. > >Does anyone know if there is a way to perform SIP Proxy to SIP Proxy >authentication (I mean in SIP protocol in general)? > >If a SIP proxy receives an INVITE from another SIP Proxy, how does the >proxy >which receives the INVITE that the originating proxy can be trusted? > >I have read something about TLS but I took it from an article of 2003... >Which is the most used method nowadays? > >Thank you very much for your attentio > >Regards > >Victor >Unclassified > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] [Serdev] Patched free-TLS implementation
by Juha Heinanen 03 May '05

03 May '05

Cesc Santasusana writes: > I really hate to be so pushy, but i dont understand how such an > important piece of code as TLS is not moving on into CVS ... or > anywhere else by this matter. I will keep sending patches till i get > tired (soon). before cesc gets tired, could someone please commit the tls code to CVS HEAD. it is then much easier to patch against. -- juha

1 0

[Serusers] Patched free-TLS implementation
by Cesc Santasusana 03 May '05

03 May '05

Hi, I really hate to be so pushy, but i dont understand how such an important piece of code as TLS is not moving on into CVS ... or anywhere else by this matter. I will keep sending patches till i get tired (soon). Anyway ... i thought someone may be interested in a compilation fix for cfg.y introduced with the tls_domains (it would not compile if the cfg.y file had been patched but the tls-core files were not there); a bug fix for the session caching (fixed by turning session caching and resumption off); and an extension (the ability to choose the list of allowed ciphers from the config file). Oh, and all the files have been tabbed, instead of spaced (for indentation). Enjoy! Cesc Unclassified

1 0

[Serusers] NAT with multiple SERs
by Andreas Granig 03 May '05

03 May '05

Hi all! We've two SERs balanced via DNS-SRV, and Contacts are replicated via SIP between the Registrars. Now I've implemented transparent NAT support, but there's a "small" problem :o) Let's say UAC-1 registers at SER-1, which replicates the contact to SER-2. Outgoing calls from UAC-1 via SER-1 or SER-2 work great, and so do calls from PSTN via SER-1 to UAC-1. But since there's no NAT-binding for UAC-1 to SER-2, incoming calls from SER-2 to UAC-1 can't work. Does anybody know how to address this issue? Thanks, Andy

5 26

[Serusers] exec_dset problem
by karl 03 May '05

03 May '05

Hi, has anybody came across this strange problem? when I am using exec_dset to fork my request to more than 3 additional URIs (actually PSTN locations through my gateway), ser is only forking to the last three. Furthermore it seems that this limitation is not present when using the lookup function to fork a request to multiple registered sip locations. This leads me to think that this problem is not associated with the MAX_BRANCHES in config.h file --------------------------------- Do you Yahoo!? Yahoo! Small Business - Try our new resources site!

1 1

Re: [Serusers] Proxy-to-Proxy authentication
by Cesc Santasusana 03 May '05

03 May '05

Hi, TLS was meant exactly for that. The RFC specifies it as a hop by hop security (auth + crypto) mechanism I think SER has a module that allows it to authenticate via Digest (UAC module). I have not tried it, because with the availability of a free TLS implementation for SER, and TLS being a mandatory feature for proxies ... why go along with such an simple mechanism as digest? The only poblem many people see with using tls is that it requires a tcp connection, thus for high traffic servers it may be a problem (though u can use force_tcp_alias, and reuse the same socket for same P2P connections, thus reducing the connection setup delay associated with tcp and specially with tls). If tcp/tls is not an option in your network, then probably you could think of IPSec (works for both tcp and udp) ... or maybe you want to implement something fancier ... say ... tunnel SIP messages withing S/MIME protected sip messages :D Regards, Cesc >>> "Victor Huertas Garcia" <vhuertas(a)hotmail.com> 05/02/05 06:01PM >>> Hi all! I'm newie in this mailing list and I am working with SER at this momen in a project. However I have a doubt I would like to clarify. Does anyone know if there is a way to perform SIP Proxy to SIP Proxy authentication (I mean in SIP protocol in general)? If a SIP proxy receives an INVITE from another SIP Proxy, how does the proxy which receives the INVITE that the originating proxy can be trusted? I have read something about TLS but I took it from an article of 2003... Which is the most used method nowadays? Thank you very much for your attentio Regards Victor Unclassified _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] SER-0.9.1 + MediaProxy + Cisco3600
by smy＠addm.com 03 May '05

03 May '05

Hi all, I'm a newbie and I've been searching through the entire mailing (including www.onsip.org) for a solution regarding landing of calls to a Cisco 3600 GW. I've configured my SER based on the "Getting Started for mediaproxy" document found on www.onsip.org, and it worked great between UAs. Based on all the info I've found on this list + suggestions from others, I came up with the following config file. I've managed to have the UAs to dial out via the cisco, yet once the PSTN side picks up, no sound could be heard (both ways). I know the Cisco is working for sure, since my friend is using AUVTECH SIP Server and is landing calls properly via the same gateway. I'm greatful for any help on this issue!! ================================================================== route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; if (method=="INVITE" && client_nat_test("1")) { record_route_preset("202.67.215.28:5080;nat=yes"); # insert IP address } else if (method!="REGISTER") { record_route(); }; end_media_session(); }; if (loose_route()) { if (has_totag() && method=="INVITE") { if (client_nat_test("1") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # labeled all transaction for accounting setflag(1); setflag(2); # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri==myself) { if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); }; } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); # ----------------------------------------------------------------- # Testing script for unconditional registration of PSTN gateway # ----------------------------------------------------------------- #if (src_ip==61.234.124.150){ # save("location_cscisco3600"); #}; # ----------------------------------------------------------------- if (!search("^Contact: \*") && client_nat_test("1")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("1")) { setflag(7); force_rport(); fix_nated_contact(); }; # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- #if (lookup("location_cscisco3600"){ # t_relay_to_udp("61.234.124.150"); # } # ----------------------------------------------------------------- lookup("aliases"); if (uri!=myself) { route(1); break; }; # -------------------------------------------------------- # PSTN Gateway config for Call Landing # -------------------------------------------------------- if (uri=~"^sip:8676[0-9]*@.*") { #rewritehostport("211.147.240.67:5060"); #rewritehostport("210.21.105.91:5060"); setflag(1); rewritehostport("61.234.124.150:5060"); force_rport(); #fix_nated_contact(); #force_rtp_proxy(); #t_relay(); #use_media_proxy(); # forward(uri:host, uri:port); if (!t_relay()) { sl_reply_error(); }; ); break; } # --------------------------------------------------------- if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:\ 0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } }; } ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

1 0

[Serusers] Cannot open Serweb pages
by Alexandros Hatziandreou 03 May '05

03 May '05

Hello, I desperately need to run a ser installation... After reading through the instructions, I have finally managed to make ser work. After that, I also followed the instructions and mysql seems to be working fine as well. (at least I can see the users I added so that should be a good sign!) Now I am trying to configure serweb so that others can connect to my sip server and add themselves etc but try as I may, I can not get it to work... I have made all the changes to the php files as suggested by the manual but when I try to open any of the webpages at the webserver's address all I get is : Database error: pconnect(localhost,administrator(a)oug.gr, $Password) failed. MYSQL Error: () Session halted. What is this? Can someone please help? Thanks you very much in advance, Alexandros.

1 0

[Serusers] softphone
by Ernesto Lucero 03 May '05

03 May '05

Hi Does anybody have any softphones for free to use with sip Thanks Ernesto Lucero Valadez

5 4

[Serusers] Re: [Serdev] Problem with Via Branch/Strange Looping Problem with ACK's
by reticent 03 May '05

03 May '05

For reference: The "Cisco_7960" traces exhibit strict_routing, and shows the SER looping problem The "Ambit_vg20" traces show the proper (RFC3261, Reference #1 at the bottom of the email) behaviour and works perfectly. *SER_SIP_PROXY*:15061 is SER *SER_SIP_PROXY*:5080 is Asterisk Both SER and Asterisk are on the same server *SIP_UAC* is the client device There are two traces for each session, one taken from the external interface (ETH0) and one from loopback (LO) In the "Cisco_7960" traces, the Cisco 7960 responds to the session initiating "200 OK" with an ACK that seems to follow Strict Routing behaviour. The issue is that the ACK does NOT match the loose_route() statement in the SER config and eventually hits a t_relay, however the RURI is that of the SER proxy itself so it routes to itself over and over again. What i expect is that it should hit loose_route() (or perhaps strict_route() ), which should replace the RURI with the information in the "Route:" header which would allow it to be properly routed to its destination. This same problem seems to happen with BYE messages as well (same situation and results) ----------------------- Reference #1: Section 12.1.2 of RFC3261 states: -- The route set MUST be set to the list of URIs in the Record-Route header field from the response, taken in reverse order and preserving all URI parameters. If no Record-Route header field is present in the response, the route set MUST be set to the empty set. This route set, even if empty, overrides any pre-existing route set for future requests in this dialog. The remote target MUST be set to the URI from the Contact header field of the response. --

2 1

Re: [Serusers] Testing
by harry gaillac 03 May '05

03 May '05

I'm in France. Can you provide me your domain and you sip address where i may call you . Do you set up srv and naptr records ? My domain : nxs.yi.org My address: sip:bob@nxs.yi.org however my name is harry . Sorry I don't speak english fluently but it's just for testing . Can send me back reply at 3:00 PM it's early in France Regards Harry --- "Edgardo O. Gonzales II" <edgardo.g(a)pacific.net.ph> a écrit: > > sounds great .. so how do we start .. what are the > parameters you need so > that I can set it up .. by the way > where is your location .. > can you provide me the ip address of your server so > that I can check > routings and latency from my location .. > > thanks, > ed > > At 11:37 AM 5/3/2005, harry gaillac wrote: > >I would be happy to participate > > > >Harry > > > >--- "Edgardo O. Gonzales II" > ><edgardo.g> a écrit: > > > > > > > > > Hi! > > > > > > We're done with the basic configuration of ser > as > > > voip gateway .. This > > > time, were now > > > on the stage of testing.. Anyone on the list > wanted > > > to participate .. We > > > will try > > > to setup gateway to gateway connection .. > > > > > > Need it asap.. > > > > > > > > > thanks, > > > ed > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > >__________________________________________________________________ > >Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace > de stockage pour vos > >mails ! > >Créez votre Yahoo! Mail sur > http://fr.mail.yahoo.com/ > > __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

2 1

[Serusers] Testing
by Edgardo O. Gonzales II 03 May '05

03 May '05

Hi! We're done with the basic configuration of ser as voip gateway .. This time, were now on the stage of testing.. Anyone on the list wanted to participate .. We will try to setup gateway to gateway connection .. Need it asap.. thanks, ed

1 0

[Serusers] ser-0.9.1 stable release
by Java Rockx 02 May '05

02 May '05

Hi All. Now that it's May can anyone say when ser-0.9.1 will be promoted to stable? Regards, Paul

2 2

[Serusers] serweb problem
by jurugy foerijgoi 02 May '05

02 May '05

2 1

[Serusers] don't succeed the install
by michael p 02 May '05

02 May '05

hi everybody i don't succeed to install ser on my debian written: "... dev:/var/www/dev/michael# dpkg -i ser_0.8.14_i386.deb (Lecture de la base de données... 45264 fichiers et répertoires déjà installés.) Préparation du remplacement de ser 0.8.14 (en utilisant ser_0.8.14_i386.deb) ... Stopping ser: ser. Dépaquetage de la mise à jour de ser ... Paramétrage de ser (0.8.14) ... Restarting ser: serERROR: loading config file(/etc/ser/ser.cfg): No such file or directory invoke-rc.d: initscript ser, action "restart" failed. ser failed to (re)start. Perhaps your configuration requires additional modules (e.g. ser-mysql-module, ser-jabber-module or ser-radius-modules). Next try to install any additional ser modules you might need and then (re)start ser by executing the command '/etc/init.d/ser start|restart'. ..." i try to install ser-mysql-module but it doesn't change please help me thanks Michael ps: the install notes are not very well understanding . is there something else?

2 1

[Serusers] HELP ser with mysql 4 won't start
by Ertugrul Akyurek 02 May '05

02 May '05

Hi all I am a newbee to linux but I have to install and run ser. I did it before with mysql 3.23 that comes with FC 3 and ser ver. was 8.1.14 Now I am on suse 9.1, sql 4 and I tried 8.1.14, 8.8, 8.9 and 9.0. I don't know which one now, but one of these asked for libmysqlclien.so.10 but I had 12 so I symlinked 10 to 12 with ln -s libmysqlclien.so.12 libmysqlclien.so.10 Now I am trying 8.1.14 and here is my conf file: # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("my_ip", "subscriber")) { www_challenge("my_ip", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } _______________________________________________________________ And here is what I get (the important part I believe): Listening on 160.75.114.107 [160.75.114.107]:5060 Aliases: konak:5060 konak.vadi:5060 WARNING: no fork mode 0(11307) DEBUG: init_mod: mysql 0(11307) mysql - initializing 0(11307) DEBUG: init_mod: sl_module stateless - initializing 0(11307) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(11307) DEBUG: MD5 calculated: 35f101c4519482cd72086674c284d714 0(11307) DEBUG: init_mod: tm 0(11307) TM - initializing... 0(11307) Call-ID initialization: '7f7e7deb' 0(11307) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(11307) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(11307) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(11307) DEBUG: lock_initialize: lock initialization started 0(11307) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(11307) DEBUG: MD5 calculated: 16de7e07c182837aae8ddf6ca34bb96f 0(11307) DEBUG: MD5 calculated: 9b4e6e19c32016239a80d97510abe487 0(11307) DEBUG: init_mod: rr 0(11307) rr - initializing 0(11307) DEBUG: init_mod: maxfwd_module Maxfwd module- initializing 0(11307) DEBUG: init_mod: usrloc 0(11307) usrloc - initializing 0(11307) DEBUG: register_fifo_cmd: new command (ul_stats) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_rm) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_dump) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_flush) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_add) registered 0(11307) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered 0(11307) find_export: found <db_use_table> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_init> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_close> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_raw_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_free_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_insert> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_delete> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) mod_init(): Database connection opened successfuly 0(11307) DEBUG: init_mod: registrar 0(11307) registrar - initializing 0(11307) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(11307) find_export: found <ul_bind_usrloc> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_register_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_get_all_ucontacts> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_insert_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_delete_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_get_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_lock_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_unlock_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_release_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_insert_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_delete_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_get_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) find_export: found <ul_update_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(11307) DEBUG: init_mod: auth 0(11307) auth module - initializing 0(11307) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(11307) DEBUG: init_mod: auth_db 0(11307) auth_db module - initializing 0(11307) find_export: found <db_use_table> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_init> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_close> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_raw_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_free_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_insert> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_delete> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(11307) find_export: found <pre_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(11307) find_export: found <post_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(11307) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(0) fixing /usr/local/lib/ser/modules/maxfwd.so mf_process_maxfwd_header 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/rr.so record_route 0(0) fixing /usr/local/lib/ser/modules/rr.so loose_route 0(0) fixing /usr/local/lib/ser/modules/tm.so t_relay 0(0) fixing /usr/local/lib/ser/modules/auth_db.so www_authorize 0(0) fixing /usr/local/lib/ser/modules/auth.so www_challenge 0(0) fixing /usr/local/lib/ser/modules/registrar.so save 0(0) query="select username,contact,expires,q,callid,cseq,replicate,state,flags,user_agent from location " 0(0) preload_udomain(): Table is empty 0(0) fixing /usr/local/lib/ser/modules/registrar.so lookup 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/tm.so t_relay 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_reply_error 0(0) INFO: udp_init: SO_RCVBUF is initially 111616 0(0) DEBUG: udp_init: trying SO_RCVBUF: 223232 0(0) DEBUG: setting SO_RCVBUF; set=223232,verify=223232 0(0) DEBUG: udp_init: trying SO_RCVBUF: 225280 0(0) DEBUG: setting SO_RCVBUF; set=225280,verify=223232 0(0) DEBUG: setting SO_RCVBUF has no effect 0(0) INFO: udp_init: SO_RCVBUF is finally 223232 1(11309) DBG: open_uac_fifo: opening fifo... 1(11309) DEBUG: FIFO created @ /tmp/ser_fifo 1(11309) DEBUG: fifo /tmp/ser_fifo opened, mode=432 1(11309) DEBUG: init_mod_child (-1): tm 1(11309) DEBUG: callid: '7f7e7deb-11309(a)160.75.114.107' 1(11309) DEBUG: init_mod_child (-1): usrloc 1(11309) DEBUG: init_mod_child (-1): auth_db 1(11309) connect_db(): No enough memory 1(11309) db_init(): Error while trying to connect database 1(11309) auth_db:init_child(): Unable to connect database 1(11309) init_mod_child(): Error while initializing module auth_db 1(11309) timer: init_child failed 1(11309) INFO: signal 15 received 1(11309) Memory status (pkg): 1(11309) fm_status (0x80d9840): 1(11309) heap size= 1047440 1(11309) dumping free list: 1(11309) hash = 1 fragments no.: 3, bucket size: 8 - 8 (first 8) 1(11309) hash = 2 fragments no.: 1, bucket size: 16 - 16 (first 16) 1(11309) hash = 3 fragments no.: 1, bucket size: 24 - 24 (first 24) 1(11309) hash = 5 fragments no.: 2, bucket size: 40 - 40 (first 40) 1(11309) hash = 24 fragments no.: 1, bucket size: 192 - 192 (first 192) 1(11309) hash = 265 fragments no.: 1, bucket size: 524288 - 1048576 (first 0) 1(11309) TOTAL: 9 free fragments = 336 free bytes 1(11309) ----------------------------- 2(11310) INFO: SIGCHLD received: we do not worry about grand-children 2(11310) INFO: fifo process starting: 11310 2(11310) DEBUG: init_mod_child (-2): tm 2(11310) DEBUG: callid: '7f7e7deb-11310(a)160.75.114.107' 2(11310) DEBUG: init_mod_child (-2): usrloc 2(11310) DEBUG: init_mod_child (-2): auth_db 2(11310) connect_db(): No enough memory 2(11310) db_init(): Error while trying to connect database 2(11310) auth_db:init_child(): Unable to connect database 2(11310) init_mod_child(): Error while initializing module auth_db 2(11310) ERROR: open_uac_fifo: init_child failed 2(11310) opening fifo server failed 2(11310) INFO: signal 15 received 2(11310) Memory status (pkg): 2(11310) fm_status (0x80d9840): 2(11310) heap size= 1047440 2(11310) dumping free list: 2(11310) hash = 1 fragments no.: 3, bucket size: 8 - 8 (first 8) 2(11310) hash = 2 fragments no.: 1, bucket size: 16 - 16 (first 16) 2(11310) hash = 3 fragments no.: 1, bucket size: 24 - 24 (first 24) 2(11310) hash = 5 fragments no.: 2, bucket size: 40 - 40 (first 40) 2(11310) hash = 24 fragments no.: 1, bucket size: 192 - 192 (first 192) 2(11310) hash = 265 fragments no.: 1, bucket size: 524288 - 1048576 (first 0) 2(11310) TOTAL: 9 free fragments = 336 free bytes 2(11310) ----------------------------- 2(11310) INFO: SIGCHLD received: we do not worry about grand-children 2(11310) INFO: signal 2 received 2(11310) Memory status (pkg): 2(11310) fm_status (0x80d9840): 2(11310) heap size= 1047440 2(11310) dumping free list: 2(11310) hash = 1 fragments no.: 3, bucket size: 8 - 8 (first 8) 2(11310) hash = 3 fragments no.: 1, bucket size: 24 - 24 (first 24) 2(11310) hash = 5 fragments no.: 2, bucket size: 40 - 40 (first 40) 2(11310) hash = 24 fragments no.: 1, bucket size: 192 - 192 (first 192) 2(11310) hash = 265 fragments no.: 1, bucket size: 524288 - 1048576 (first 0) 2(11310) TOTAL: 8 free fragments = 320 free bytes 2(11310) ----------------------------- I am sure I have enough memory, I actually can't even make any meaning of this error message. When I start ser in normal mode (not debug) it says it is listening and serctl moni is cycling all well, but the server doesn't seem to run then either. Please at least offer me something to try. So far I had many problems with this but I overcame them one by one but I am totally desperate against this one. And please don't forget that I am a newbee at linux Thanx already Ertugrul

2 1

[Serusers] sorry -- cannot open write fifo
by Ramakrishnan_S 02 May '05

02 May '05

Hi I have installed latest version of SER. I have been getting this error message "sorry -- cannot open write fifo" . There is a permission on the FIFO for httpd process to read and write. But still I am getting error. Any pointers for to resolve this will be helpful. Can any one help please. Thanks Rama DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.

3 2

[Serusers] Forcing TCP using exec_dset?
by Evan Borgström 02 May '05

02 May '05

Hey All, We've got SER deployed as a man in the middle proxy situation where both sides need to be talking TCP. The problem here is that there is a LOT of NAT going on between the client and the eventual end point that unfortunately cannot be removed from the situation. Right now I've got everything fixed up and working for whenever clients send messages so that all the fixing up and rewriting takes place and then transaction kicks in and the rest of the dialog completes as expected. The problem comes in when the far end server sends a message to the client. I've got a script on the backend that builds the correct URI and passes it back to ser using exec_dset, the only problem is that exec_dset() followed by t_relay() forces the packet to be sent via UDP, which the client is not expecting and thus it times out. I've tried appending ;transport=tcp to the URI that the script returns however I get routing errors when I do this. Is there anyway (without using t_relay_to_tcp()) to force the packets being sent to use TCP? -Evan

1 0

[Serusers] error: 400; check if you use aliases in SER
by Leon Sun 02 May '05

02 May '05

Hi, I am using ser 0.9.0 and ser is working with Mysql auth without problem. I can login with default user 'admin' and password 'heslo'. I received an error 'error: 400; check if you use aliases in SER' when I tried to use 'serctl add leonsun leonsun leonsun(a)mydomain.com'. If I went to Mysql and inserted user and password into subscriber manually, I could use it to login. The funny thing is there is always this message whenever I input right or wrong password. [root@sip ser]# serctl add leonsun leonsun leonsun(a)mydomain.com MySql password: #any input whatever it's correct or not error: 400; check if you use aliases in SER Could anyone please advice? Thanks

1 0

RE: [Serusers] check_ser plugin for nagios.
by Ricardo Martinez 02 May '05

02 May '05

Hello. Thanks for your answers. Finally i was able to monitor my SER with NAGIOS and SIPSAK, maybe not a easy task for those who never used NAGIOS. I'm aware that sipsak support NAGIOS compliant responses, but despite of this the interaction between NAGIOS and SIPSAK is not so clear. I used the script that i found in http://lists.iptel.org/pipermail/serusers/2004-January/005195 with some modifications for the anwswers. I would like to ask one more question. What other kind of test would be useful to monitor SER using NAGIOS? Can i use sipsak to monitor a B2BUA? Thanks! Ricardo.- > -----Mensaje original----- > De: Matt Schulte [mailto:mschulte@netlogic.net] > Enviado el: Lunes, 02 de Mayo de 2005 11:45 > Para: Edgardo O. Gonzales II; Ricardo Martinez; serusers(a)lists.iptel.org > Asunto: RE: [Serusers] check_ser plugin for nagios. > > > I just implemented sipsak this morning for Nagios, sipsak natively > supports Nagios compliant responses. This accomplishes the following > that check_tcp doesn't. > > layer7 response (layer3 is fine and dandy but why not go all the way) > checks for correct callflow > checks authentication (if needed??) > > > Ironically enough I just slapped it in and it works fine. > sample syntax: > sipsak -s sip:+10005551234@full.uri.blah -H your.local.hostname -u > sip_user -a sip_password -N > > The -N makes it respond in compliance to Nagios. > > > -----Original Message----- > From: Edgardo O. Gonzales II [mailto:edgardo.g@pacific.net.ph] > Sent: Friday, April 29, 2005 7:37 PM > To: Ricardo Martinez; 'serusers(a)lists.iptel.org' > Subject: Re: [Serusers] check_ser plugin for nagios. > > > > use the tcp check on nagios then monitor the port ex : 5060 > > thanks, > ed > > At 04:05 AM 4/30/2005, Ricardo Martinez wrote: > >Hello list. > > I'm trying to use nagios to check my ser status, so far i > >found a script in : > >http://lists.iptel.org/pipermail/serusers/2004-January/005195. html and >i tested it without any luck. Does someone have any check_ser that >works ok?. I will really appreciate. > >Thanks > >Ricardo Martinez.- > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] installing php
by Llanos Serna García-Conde 02 May '05

02 May '05

1 0

[Serusers] Proxy-to-Proxy authentication
by Victor Huertas Garcia 02 May '05

02 May '05

Hi all! I'm newie in this mailing list and I am working with SER at this momen in a project. However I have a doubt I would like to clarify. Does anyone know if there is a way to perform SIP Proxy to SIP Proxy authentication (I mean in SIP protocol in general)? If a SIP proxy receives an INVITE from another SIP Proxy, how does the proxy which receives the INVITE that the originating proxy can be trusted? I have read something about TLS but I took it from an article of 2003... Which is the most used method nowadays? Thank you very much for your attentio Regards Victor

1 0

[Serusers] ser to asterisk (another domain)
by "Sebastian Kühner" 02 May '05

02 May '05

Hello, I want to make a call from ser to asterisk but it doesn't work. My asterisk-Server is running on 192.168.1.222 and my ser-Server on 192.168.1.223. If I want to make a call to sip:12@192.168.1.222 there appears the message: "Proxy Authentication Required". For routing to asterisk I use the following code: if (!(uri==myself)) { route(2); break; }; route[2] { # outbound requests are allowed only for registered BigU users if (!(src_ip==192.168.1.223) & !(proxy_authorize("192.168.1.223", "subscriber"))) { # ACK and CANCEL have no security mechanisms so they are just # noted /*if (method=="ACK" | method=="BYE") { log(1, "LOG: failed outbound authentication for ACK granted\n"); } else if (method=="CANCEL") { log(1, "LOG: failed outbound authentication for CANCEL granted\n"); }else {*/ proxy_challenge("192.168.1.223", "0"); break; #}; }; # to maintain credibility of our proxy, we check From in INVITEs if (!src_ip==192.168.1.223 & method=="INVITE" & !check_from()) { log(1, "LOG: Spoofed from attempt\n"); sl_send_reply("403", "Use From=id next time"); break; }; append_hf("P-hint: OUTBOUND ON INTERNET\r\n"); if (!t_relay()) { sl_reply_error(); break; }; } Thanks! -- +++ Neu: Echte DSL-Flatrates von GMX - Surfen ohne Limits +++ Always online ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl

1 0

[Serusers] RE: confirm a7b970894e016f5f9dd51266a05184244f831ebc
by Victor Huertas Garcia 02 May '05

02 May '05

>From: serusers-request(a)lists.iptel.org >Reply-To: serusers-request(a)lists.iptel.org >To: vhuertas(a)hotmail.com >Subject: confirm a7b970894e016f5f9dd51266a05184244f831ebc >Date: Mon, 02 May 2005 17:50:52 +0200 > >Mailing list subscription confirmation notice for mailing list >Serusers > >We have received a request from 213.170.46.30 for subscription of your >email address, "vhuertas(a)hotmail.com", to the serusers(a)lists.iptel.org >mailing list. To confirm that you want to be added to this mailing >list, simply reply to this message, keeping the Subject: header >intact. Or visit this web page: > > >http://lists.iptel.org/mailman/confirm/serusers/a7b970894e016f5f9dd51266a05… > > >Or include the following line -- and only the following line -- in a >message to serusers-request(a)lists.iptel.org: > > confirm a7b970894e016f5f9dd51266a05184244f831ebc > >Note that simply sending a `reply' to this message should work from >most mail readers, since that usually leaves the Subject: line in the >right form (additional "Re:" text in the Subject: is okay). > >If you do not wish to be subscribed to this list, please simply >disregard this message. If you think you are being maliciously >subscribed to the list, or have any other questions, send them to >serusers-owner(a)lists.iptel.org.

1 0

RE: [Serusers] check_ser plugin for nagios.
by Matt Schulte 02 May '05

02 May '05

I just implemented sipsak this morning for Nagios, sipsak natively supports Nagios compliant responses. This accomplishes the following that check_tcp doesn't. layer7 response (layer3 is fine and dandy but why not go all the way) checks for correct callflow checks authentication (if needed??) Ironically enough I just slapped it in and it works fine. sample syntax: sipsak -s sip:+10005551234@full.uri.blah -H your.local.hostname -u sip_user -a sip_password -N The -N makes it respond in compliance to Nagios. -----Original Message----- From: Edgardo O. Gonzales II [mailto:edgardo.g@pacific.net.ph] Sent: Friday, April 29, 2005 7:37 PM To: Ricardo Martinez; 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] check_ser plugin for nagios. use the tcp check on nagios then monitor the port ex : 5060 thanks, ed At 04:05 AM 4/30/2005, Ricardo Martinez wrote: >Hello list. > I'm trying to use nagios to check my ser status, so far i >found a script in : >http://lists.iptel.org/pipermail/serusers/2004-January/005195.html and >i tested it without any luck. Does someone have any check_ser that >works ok?. I will really appreciate. > >Thanks > >Ricardo Martinez.- > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] ser to asterisk
by "Sebastian Kühner" 02 May '05

02 May '05

Hello, I want to make a call from ser to asterisk but it doesn't work. My asterisk-Server is running on 192.168.1.222 and my ser-Server on 192.168.1.223. If I want to make a call to sip:12@192.168.1.222 there appears the message: "Proxy Authentication Required". For routing to asterisk I use the following code: if (!(uri==myself)) { route(2); break; }; route[2] { # outbound requests are allowed only for registered BigU users if (!(src_ip==192.168.1.223) & !(proxy_authorize("192.168.1.223", "subscriber"))) { # ACK and CANCEL have no security mechanisms so they are just # noted /*if (method=="ACK" | method=="BYE") { log(1, "LOG: failed outbound authentication for ACK granted\n"); } else if (method=="CANCEL") { log(1, "LOG: failed outbound authentication for CANCEL granted\n"); }else {*/ proxy_challenge("192.168.1.223", "0"); break; #}; }; # to maintain credibility of our proxy, we check From in INVITEs if (!src_ip==192.168.1.223 & method=="INVITE" & !check_from()) { log(1, "LOG: Spoofed from attempt\n"); sl_send_reply("403", "Use From=id next time"); break; }; append_hf("P-hint: OUTBOUND ON INTERNET\r\n"); if (!t_relay()) { sl_reply_error(); break; }; } Thanks! -- +++ Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS +++ GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail

1 0

[Serusers] SERWEB problems
by harry gaillac 02 May '05

02 May '05

Hello, I posted to you and serusers mailing list many mails about serweb in the past . You have been adding new features to serweb however I would have liked finding more documentation and roadmap for serweb project . Could you tell me more about XXL ? I downloaded the latest release two day ago (unstable) by hoping it would run well with ser (unstable) . I still wish to test accounting, missed call, message stored, ... but after setting up serweb I get these messages after a user is logged. Regards Harry Warning: require_and_agregate_methods(../../data_layer/method.clear_proxy_xxl.php): failed to open stream: No such file or directory in /var/www/serweb/html/data_layer.php on line 120 Fatal error: require_and_agregate_methods(): Failed opening required '../../data_layer/method.clear_proxy_xxl.php' (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/serweb/html/data_layer.php on line 120 ___________________________________________________________________________________________________ Le nouveau Yahoo! Messenger est arrivé ! Découvrez toutes les nouveautés pour dialoguer instantanément avec vos amis. A télécharger gratuitement sur http://fr.messenger.yahoo.com

1 0

[Serusers] starting SER - ld.preload.so
by Gerard Wagener 02 May '05

02 May '05

Hello, I have some problems with launching SER. When I start it, I receive no error, the return value of SER is 0, but I cannot find SER's PID (ps -A | grep "ser"). when I started SER with strace (strace ser start) I noticed that the access to ld.preload.so fails, because I have no such file. Does anybody know where I can obtain this library? Has the glibc to be pachted? Or is the problem somewhere else? Here's my configuration: Suse Linux 9.3 ser 0.9.0 glibc 2.3.3-118 kernel 2.6.8-24.14 gcc 3.3.4 bison 1.875 flex 2.5.4 make 3.80 sed 4.1.2 coreutils 5.2.1 Ser was installed as follows tar -vzxf ser-0.9.0_src.tar.gz cd ser-0.9.0 make all make install Thanks a lot, G�rard __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] don't succeed the install
by michael p 02 May '05

02 May '05

hi everybody i don't succeed to install ser on my debian written: "... dev:/var/www/dev/michael# dpkg -i ser_0.8.14_i386.deb (Lecture de la base de données... 45264 fichiers et répertoires déjà installés.) Préparation du remplacement de ser 0.8.14 (en utilisant ser_0.8.14_i386.deb) ... Stopping ser: ser. Dépaquetage de la mise à jour de ser ... Paramétrage de ser (0.8.14) ... Restarting ser: serERROR: loading config file(/etc/ser/ser.cfg): No such file or directory invoke-rc.d: initscript ser, action "restart" failed. ser failed to (re)start. Perhaps your configuration requires additional modules (e.g. ser-mysql-module, ser-jabber-module or ser-radius-modules). Next try to install any additional ser modules you might need and then (re)start ser by executing the command '/etc/init.d/ser start|restart'. ..." i try to install ser-mysql-module but it doesn't change please help me thanks Michael ps: the install notes are not very well understanding . is there something else?

1 0

[Serusers] sorry about misspelling
by Ertugrul Akyurek 02 May '05

02 May '05

Sorry but at my recent mail I said I wanted to install 8.1.14, obviously there is no ver. like that and I meant 8.14. Sorry about the misspellings and all but it is 4:30 am here :)

1 0

[Serusers] Cant see other activity aside from INVITE
by Edgardo O. Gonzales II 01 May '05

01 May '05

Hi! My accounting is working but im wondering why its only logging INVITE activity.. Where is the other activity. Here's the example : | Edgardo Gonzales <sip:edgardo.g@abc.com.ph>;tag=2823768407 | <sip:100@abc.com.ph>;tag=2823768407 | 486 | INVITE | sip:100@abc.com.ph | sip:edgardo.g@210.23.237.236:5060 | sip:edgardo.g@abc.com.ph | sip:100@abc.com.ph | 6314BDAF-C1FC-4122-9E25-E8BD24B339A8(a)210.23.237.236 | edgardo.g | abc.com.ph | 2823768407 | 2823768407 | 2005-05-01 08:09:11 | 2005-05-01 16:09:11 | | Alvin Clavo De Comer <sip:alvin.c@abc.com.ph>;tag=471711666 | <sip:200@abc.com.ph>;tag=471711666 | 486 | INVITE | sip:200@abc.com.ph | sip:alvin.c@210.23.237.151:5060 | sip:alvin.c@abc.com.ph | sip:200@abc.com.ph | A02CF2C7-50B2-4560-A9F6-134AFBB0F125(a)210.23.237.151 | alvin.c | abc.com.ph | 471711666 | 471711666 | 2005-05-01 08:10:39 | 2005-05-01 16:10:39 | I was able to make a call by the way .. Here's my config also on my ser.cfg loadmodule "/usr/lib/ser/modules/acc.so" # -- acc parameters -- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 3) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_flag", 2) modparam("acc", "failed_transactions", 1) if (!method == "REGISTER" || !method == "INFO" ) { setflag(1); setflag(2); } thanks, ed

1 0

[Serusers] strict_routing() function in rr module, where has it gone?
by reticent 30 Apr '05

30 Apr '05

I have several different UAC's that insist on doing strict routing and this is causing me some moderate issues as i can find no way to deal with the situation on SER. According to the documentation that comes with the "rr" module there is supposed to be a function called "strict_route()" that does exactly what i want (move the value from the "Route:" header into the RURI), however the module does not provide this function. I'm curious if this functionality has been folded into loose_route or if it has simply dissappeared? There is a section in the source code of rr_mod.c that allows you to enable the function "record_route_strict()" and it also talks about enabling "strict_route()" however i have had no success with it. tavis

3 4

RE: [Serusers] ACC into mysql
by Edgardo O. Gonzales II 30 Apr '05

30 Apr '05

thank you so much .. I finally made it work after I rebuild everything just to make sure my installation and compilation is clean .. With regards to call routing, can you give me an example where we can communicate with other gatekeeper thanks, ed At 09:13 PM 4/26/2005, Matt Schulte wrote: >This particular config (I don't think?) won't log to a DB, additionally >you need to setflag(1); somewhere in your config. We tried to set on >"outbound" only originally and didn't have much luck so I set it near the >top. To log to (my)sql you will additionally need to set another flag and >setup similar mod params: > > >modparam("acc", "db_url", "mysql://ser:serro@blah.mysql.haha/dbname") ># Note flag 2, you will need to setflag(1); AND setflag(2); >modparam("acc", "db_flag", 2) >#Note this one logs all failed calls from the invite response, I find it >useful >modparam("acc", "failed_transactions", 1) ># In your route config use something like the following > ># This is pretty much near the top, while ACC won't log reg's or INFO >anyway, I just thought it'd be a little cleaner to have >... >if (!method == "REGISTER" || !method == "INFO" ) { > setflag(1); > setflag(2); >} >... > ># Doing the above ensure everything gets tagged including BYE's. A good >reason why your BYE's may not get ># tagged is possibly because record-route could be relaying the call >before the flag gets set, just a thought.. >-----Original Message----- >From: Edgardo O. Gonzales II [mailto:edgardo.g@pacific.net.ph] >Sent: Tuesday, April 26, 2005 1:29 AM >To: Kofi Obiri-Yeboah >Cc: serusers(a)lists.iptel.org >Subject: RE: [Serusers] ACC into mysql >Importance: High > > >Thanks again for your help .. Here's my running ser.cfg >Hope you can help me make my accounting work.. > >thanks, >ed > >================================================================ ># ----------- global configuration parameters ------------------------ > >#debug=3 >#fork=yes >#log_stderror=no > >#debug=7 >#fork=no >#log_stderror=yes > >check_via=no >dns=no >rev_dns=no >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > >loadmodule "/usr/local/ser/lib/ser/modules/mysql.so" >loadmodule "/usr/local/ser/lib/ser/modules/sl.so" >loadmodule "/usr/local/ser/lib/ser/modules/tm.so" >loadmodule "/usr/local/ser/lib/ser/modules/rr.so" >loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" >loadmodule "/usr/local/ser/lib/ser/modules/auth.so" >loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so" >loadmodule "/usr/local/ser/lib/ser/modules/acc.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >modparam("usrloc", "db_mode", 1) >modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser") > ># -- auth params -- > >modparam("auth_db", "calculate_ha1", yes) >modparam("auth_db", "password_column", "password") > ># -- rr params -- > >modparam("rr", "enable_full_lr", 1) > ># -- acc params -- > >modparam("acc", "log_level", 1) >modparam("acc", "log_flag", 1) >modparam("acc", "log_missed_flag", 3) > ># ------------------------- request routing logic ------------------- > >alias=abc.com.ph > ># main routing logic > >route{ > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > record_route(); > if (loose_route()) { > t_relay(); > break; > }; > > if (uri=~"abc.com.ph") { > if (method=="REGISTER") { > if (!www_authorize("abc.com.ph", "subscriber")) { > www_challenge("abc.com.ph", "0"); > break; > }; > > save("location"); > break; > }; > > lookup("aliases"); > > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > if (!t_relay()) { > sl_reply_error(); > }; > >} > > > > >================================================================ >At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote: >>I am assuming your question is if the record_route() function is a >>parameter for accounting? If that was your question then the answer is >>no. Generally you invoke record_route() to ensure acl acceptance on a >>gateway (i.e. all calls through that gateway) >>-----Original Message----- >>From: Edgardo O. Gonzales II [ mailto:edgardo.g@pacific.net.ph] >>Sent: Monday, April 25, 2005 6:22 PM >>To: Kofi Obiri-Yeboah >>Cc: serusers(a)lists.iptel.org >>Subject: RE: [Serusers] ACC into mysql >> >>Hi Kofi! >>got it.. thanks for immediate feedback .. however my accounting is not >>working. >>any parameters to be added to make it work.. >>I have the following info already on my ser.cfg >>modparam("acc", "log_level", 1) >>modparam("acc", "log_flag", 1) >>modparam("acc", "log_missed_flag", 3) >> >>record_route(); -> its this a parameter for accounting >>thanks, >>ed >> >>At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote: >>>I think the correct modparam statement should read as follows: >>>modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") >>> >>>please note that "my" is required in front of sql >>> >>>and not: >>>modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >>> >>>-----Original Message----- >>>From: serusers-bounces(a)iptel.org [ mailto:serusers-bounces@lists.iptel.org]On >>>Behalf Of Edgardo O. Gonzales II >>>Sent: Monday, April 25, 2005 5:20 PM >>>To: serusers(a)lists.iptel.org >>>Subject: Re: [Serusers] ACC into mysql >>> >>>Hi all! >>>Im also receiving this error message. >>>Can somebody help us on how to make accounting work using mysql. >>>thanks, >>>ed >>>At 06:01 AM 4/26/2005, Leon Sun wrote: >>>>Hi, >>>>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql >>>>followed instruction from manual. I found, first, modparam("acc", >>>>"db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in >>>>ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad >>>>config file (1 errors) >>>>If I disabled it, SER worked fine but I couldnt see any record in acc >>>>table. >>>>Would anyone suggest how to put call records into Mysql? >>>>Thank you. >>>> >>>># ----------- global configuration parameters ------------------------ >>>>#debug=3 # debug level (cmd line: -dddddddddd) >>>>#fork=yes >>>>#log_stderror=no # (cmd line: -E) >>>>/* Uncomment these lines to enter debugging mode >>>>debug=7 >>>>fork=no >>>>log_stderror=yes >>>>*/ >>>>check_via=no # (cmd. line: -v) >>>>dns=no # (cmd. line: -r) >>>>rev_dns=no # (cmd. line: -R) >>>>#port=5060 >>>>#children=4 >>>>fifo="/tmp/ser_fifo" >>>># ------------------ module loading ---------------------------------- >>>># Uncomment this if you want to use SQL database >>>>loadmodule "/usr/lib/ser/modules/mysql.so" >>>>loadmodule "/usr/lib/ser/modules/acc.so" >>>>loadmodule "/usr/lib/ser/modules/sl.so" >>>>loadmodule "/usr/lib/ser/modules/tm.so" >>>>loadmodule "/usr/lib/ser/modules/rr.so" >>>>loadmodule "/usr/lib/ser/modules/maxfwd.so" >>>>loadmodule "/usr/lib/ser/modules/usrloc.so" >>>>loadmodule "/usr/lib/ser/modules/registrar.so" >>>># Uncomment this if you want digest authentication >>>># mysql.so must be loaded ! >>>>loadmodule "/usr/lib/ser/modules/auth.so" >>>>loadmodule "/usr/lib/ser/modules/auth_db.so" >>>># ----------------- setting module-specific parameters --------------- >>>>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >>>># -- usrloc params -- >>>>#modparam("usrloc", "db_mode", 0) >>>># Uncomment this if you want to use SQL database >>>># for persistent storage and comment the previous line >>>>modparam("usrloc", "db_mode", 2) >>>># -- auth params -- >>>># Uncomment if you are using auth module >>>># >>>>modparam("auth_db", "calculate_ha1", yes) >>>># >>>># If you set "calculate_ha1" parameter to yes (which true in this config), >>>># uncomment also the following parameter) >>>># >>>>modparam("auth_db", "password_column", "password") >>>># -- rr params -- >>>># add value to ;lr param to make some broken UAs happy >>>>modparam("rr", "enable_full_lr", 1) >>>>modparam("acc","log_level",1) >>>>modparam("acc","log_flag",1) >>>># ------------------------- request routing logic ------------------- >>>># main routing logic >>>>route{ >>>> # initial sanity checks -- messages with >>>> # max_forwards==0, or excessively long requests >>>> if (!mf_process_maxfwd_header("10")) { >>>> sl_send_reply("483","Too Many Hops"); >>>> break; >>>> }; >>>> if ( msg:len > max_len ) { >>>> sl_send_reply("513", "Message too big"); >>>> break; >>>> }; >>>> # we record-route all messages -- to make sure that >>>> # subsequent messages will go through our proxy; that's >>>> # particularly good if upstream and downstream entities >>>> # use different transport protocol >>>> record_route(); >>>> # loose-route processing >>>> if (loose_route()) { >>>> if (method=="BYE") { >>>> setflag(1); >>>> setflag(2); >>>> } >>>> t_relay(); >>>> break; >>>> }; >>>> #labeled all transaction for accounting >>>> setflag(1); >>>> setflag(2); >>>> if (method=="CANCEL"){ >>>> t_relay(); >>>> }; >>>> # (in case, it does not work, use the following command >>>> # with proper names and addresses in it) >>>> if (uri==myself) { >>>> # This for PSTN destination >>>> if (uri=~"^sip:1") >>>> { rewritehost("10.10.10.10"); >>>> forward(10.10.10.10,5060); >>>> break; >>>> } >>>> if (method=="REGISTER") { >>>> # Uncomment this if you want to use digest authentication >>>> if (!www_authorize("sip.mycommunications.com", >>>> "subscriber")) { >>>> >>>>www_challenge("sip.mycommunications.com", "0"); >>>> break; >>>> }; >>>> save("location"); >>>> break; >>>> }; >>>> # native SIP destinations are handled using our USRLOC DB >>>> if (!lookup("location")) { >>>> sl_send_reply("404", "Not Found"); >>>> break; >>>> }; >>>> }; >>>> # forward to current uri now; use stateful forwarding; that >>>> # works reliably even if we forward from TCP to UDP >>>> if (!t_relay()) { >>>> sl_reply_error(); >>>> }; >>>>} >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Serusers] sems and asterisk problem
by ooo ooo 30 Apr '05

30 Apr '05

I want to know who is batter in sems and asteisk. I want to let my ser support voicemail. http://sip800.8866.org thanks a lot . B.D. Rose. _________________________________________________________________ 与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn

2 1

[Serusers] Ser+serweb
by Tomek 30 Apr '05

30 Apr '05

Helo I've two questions: 1. When I log in user account on serweb i see this red messege: "sorry - cannot open write fifo". Fifo patch is /tmp/ser_fifo. I think that is a problem with apache and DocumentRoot but what do I do? :) 2. I wanted to add a new subscriber on serweb but without send e-mail and confirm but only confirm and add to mysql. Is that possible and where can I find information how ? Thanks for any help- sorry for my english. TS

2 1

[Serusers] check_ser plugin for nagios.
by Ricardo Martinez 30 Apr '05

30 Apr '05

Hello list. I'm trying to use nagios to check my ser status, so far i found a script in : http://lists.iptel.org/pipermail/serusers/2004-January/005195.html and i tested it without any luck. Does someone have any check_ser that works ok?. I will really appreciate. Thanks Ricardo Martinez.-

4 3

[Serusers] Query the MySQL database from SER?
by Jose Gonzalez 29 Apr '05

29 Apr '05

Hello all, I'm using SER 0.9.0 and I have almost everything up and running perfectly. The last thing I would like to do is query the MySQL database for a field in the subscriber table to set as the Caller ID (SIP From). I already have the UAC module up and running fine to rewrite the info, I just need to know how to query that info from the DB. I looked everywhere and can't find anything. Is this possible? Thanks, Jose Gonzalez

1 0

[Serusers] account from an end-device
by "Sebastian Kühner" 29 Apr '05

29 Apr '05

Hello, In the documentation of acc is written: "If a UA fails in middle of conversation, a proxy will never learn it. In general, a better practice is to account from an end-device (such as PSTN gateway), which best knows about call status (including media status and PSTN status in case of the gateway)." Has anyone an idea how to make this? How can I get this informations from a PSTN Gateway? What I want to have is a server on which are connected my "users". A user can enter a "uri". If this uri begins with "sip:00", I want to connect them to a pstn gateway. Thanks! Sebastian -- +++ GMX - die erste Adresse f�r Mail, Message, More +++ 10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail

1 0

[Serusers] no accounting records
by "Sebastian Kühner" 29 Apr '05

29 Apr '05

Hello, I have following lines in my ser.cfg-File: loadmodule "/usr/local/lib/ser/modules/acc.so" # ------------- accounting parameters modparam("acc", "log_missed_flag", 3) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_url", "mysql://ser:heslo@192.168.1.223/ser") modparam("acc", "report_cancels", 1) modparam("acc", "log_fmt", "cdfimorstup") ...and although I put "setflag(1)" at this position: # ------------- routing logic route { setflag(1); There are no accounting records in my data base (ser->acc). Has anyone an idea what could be wrong? Thanks! Sebastian -- +++ GMX - die erste Adresse f�r Mail, Message, More +++ 10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail

1 1

[Serusers] Can I Force SER to Send On A Specific Network Interface?
by Java Rockx 29 Apr '05

29 Apr '05

Hi All. I have a multi-homed ser-0.9.1 proxy. Suppose my interfaces are as follows: eth0: 10.3.0.221 <http://10.3.0.221> eth1: 10.2.0.42 <http://10.2.0.42> If SER recieves a SIP message on eth0, how can I force SER to send any replies out eth1? Regards, Paul

2 3

[Serusers] downloading php via ftp
by Llanos Serna García-Conde 29 Apr '05

29 Apr '05

1 0

[Serusers] Stun
by Gin 29 Apr '05

29 Apr '05

which is best stun server? How I make to get the same and install. And make ser run together. My Ser just run with X-Lite my grandstream don't run in nat.. Maique

1 0

[Serusers] radiusclient 4.3
by Edgardo O. Gonzales II 29 Apr '05

29 Apr '05

Hi! Where I can find radiusclient version 4.3 for debian. thanks, ed

1 0

[Serusers] acc and db_url
by "Sebastian Kühner" 29 Apr '05

29 Apr '05

Hello, I read in the documentation of the module acc that you can set the database path of accounting with modparam("acc", "db_url", "mysql://ser:heslo@192.168.1.223/ser") but if I want to start ser appears an error: 0(2041) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(2041) parse error (108,20-21): Can't set module parameter ERROR: bad config file (1 errors) Is this a bug of the module? The problem is, althoug I put the setflag, accounting do not work. In the table acc is no entry. Thanks! Sebastian -- +++ Sparen beginnt mit GMX DSL: http://www.gmx.net/de/go/dsl

3 3

RE: [Serusers] SRV query
by m36828253-1＠imap.1and1.com 29 Apr '05

29 Apr '05

Recently I have tested Teliann 3100 model with their V3.0 and V4.0 firmware. -- It even don't look into SRV record. -- No way to provide domain/realm entry -- there have option to provide registrar address, phonr tries to register as user_id@registrar_address. Not very good thing when you have use_domain=1 -- same thing happen for sip proxy address, if you invite any user, it tries to find invite_user@proxy_server_address -- PLAR don't work -- VAD don't work -- STUN is another pain in the neck, it never worked If anybody else worked with this phone, correct me If I am wrong. Thanks, Mohammad Original Message: ----------------- From: Klaus Darilion klaus.mailinglists(a)pernau.at Date: Fri, 29 Apr 2005 13:06:24 +0200 To: serusers(a)iptel.org Subject: [Serusers] SRV query Hi all! I'm not up2date with ser CVS. Does it already support multiple SRV records and failover? regards, klaus PS: I've also tested a couple of clients, maybe you can complete this list. bad clients: - eyeBeam 1.1 3004w stamp 16863 uses first SRV, no failover, ignores ICMP (retransmissions) - ser 0.8.12 uses first SRV, no failover, ignores ICMP (retransmissions) - Asterisk CVS-HEAD-04/04/05-13:06:02 uses any SRV, no failover, ignores ICMP (retransmissions) - Windows Messenger 5.1 (5.1.0639), RTC API RTC/1.3.5369 uses first SRV, no failover, processes ICMP (no retransmissions) - Cisco 5300, IOS 12.3(10) uses only first SRV, processes ICMP (1 retransmissions), failover to A record good clients: - Snom 200 3.56r processes priority, failover, processes ICMP (no retransmissions) - Cisco 7960, POS3-06-2-00 processes priority, failover, processes ICMP (no retransmissions) _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

[Serusers] problem compiling ser 0.9 with radius support
by Edgardo O. Gonzales II 29 Apr '05

29 Apr '05

Hi! Can somebody teach mo how to fix this error .. I already install my radiusclient-ng-0.5.0. Thanks .. chrome:/usr/local/src/installer/ser-0.9.0# make debug=all all make[1]: Entering directory `/usr/local/src/installer/ser-0.9.0/modules/acc' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -malign-double -falign-loops -mcpu=athlon -DNAME='"ser"' -DVERSION='"0.9.0"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DSQL_ACC -DRAD_ACC -I/usr/local/include -c acc.c -o acc.o acc.c: In function `acc_rad_request': acc.c:663: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:663: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast acc.c:663: warning: passing arg 4 of `rc_avpair_add' makes integer from pointer without a cast acc.c:663: error: too many arguments to function `rc_avpair_add' acc.c:668: warning: passing arg 2 of `rc_avpair_add' makes integer from pointer without a cast acc.c:668: warning: passing arg 3 of `rc_avpair_add' makes pointer from integer without a cast

1 0

[Serusers] configuring ser 0.9
by Edgardo O. Gonzales II 29 Apr '05

29 Apr '05

Hi all! Anyone who knows how to configure ser 0.9. I want to enable radiator support and mysql. What are the modules I need to install to make all things work. Can you send me a little scratch on how to do it including the modification of acc/Makefile so that I can path the right dir for radius.h thanks, ed

1 0

[Serusers] SRV query
by Klaus Darilion 29 Apr '05

29 Apr '05

Hi all! I'm not up2date with ser CVS. Does it already support multiple SRV records and failover? regards, klaus PS: I've also tested a couple of clients, maybe you can complete this list. bad clients: - eyeBeam 1.1 3004w stamp 16863 uses first SRV, no failover, ignores ICMP (retransmissions) - ser 0.8.12 uses first SRV, no failover, ignores ICMP (retransmissions) - Asterisk CVS-HEAD-04/04/05-13:06:02 uses any SRV, no failover, ignores ICMP (retransmissions) - Windows Messenger 5.1 (5.1.0639), RTC API RTC/1.3.5369 uses first SRV, no failover, processes ICMP (no retransmissions) - Cisco 5300, IOS 12.3(10) uses only first SRV, processes ICMP (1 retransmissions), failover to A record good clients: - Snom 200 3.56r processes priority, failover, processes ICMP (no retransmissions) - Cisco 7960, POS3-06-2-00 processes priority, failover, processes ICMP (no retransmissions)

2 1

[Serusers] t_on_failure and t_on_reply
by Iqbal 29 Apr '05

29 Apr '05

Hi Is there any order these should be placed in config file. Is a failure response also considered a reply in t_on_reply, if so, then placing reply above failure will mean failure never gets caught Iqbal

2 1

[Serusers] zombie status in location table
by Cesc Santasusana 29 Apr '05

29 Apr '05

Hi, After de-registration, a contact in the location table is marked as zombie, and after some time, it is deleted from the table. Right? Ok, what happens when this user receives a call ... i mean, he is in the location table (as zombie), but he is not registered really on the phone? What do the lookup('location") and registered('location") in this scenario return? In my config ... a first call to lookup(loc) returns false, and then calling registered(loc) returns true. Is that right? Shouldn't the two functions do the same, just lookup rewrites the uri? Tks! Cesc Unclassified

2 1

[Serusers] Free TLS Implementation
by Peter Griffiths 29 Apr '05

29 Apr '05

hello -- some time ago i extended ser to support tls, basically i implemented functions needed by the existing tls api. i polished the code a bit and i am giving it away freely. there are still some things to fix, but it mostly works. to use the code, copy tls directory into your ser tree and optionally patch cfg.lex and cfg.y, then recompile ser with TLS=on. if you also patch cfg.lex and cfg.y then you can use extended cfg syntax and specify different keys and certificates for different listen sockets. this is similar to apache virtual servers with ssl. without the patches you can only use the default configuration directives. to iptel: would be great to have it in cvs, what do you think ? -- peter ----------- example ser.cfg: listen=tls:127.0.0.1:5061 listen=tls:127.0.0.1:5062 # defaults for outgoing tls connections tls_certificate="default.crt" tls_private_key = "default.key" # domain1.com tls_domain[127.0.0.1:5061] { tls_certificate="domain1.crt" tls_private_key = "domain1.key" tls_method = sslv2 } # domain2.com tls_domain[127.0.0.1:5062] { tls_certificate="domain2.crt" tls_private_key="domain2.key" } __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/

5 4

[Serusers] Latest most stable SER release
by Darren Nay 29 Apr '05

29 Apr '05

Hey Guys, I need some advice. We have been running SER 0.8.12 since it was released almost a year ago. However, we have decided recently that we need to upgrade for some of the features in the newer versions. What is the most stable later release? I see releases of 10.99, and 0.9.x, and IPTels webpage even says that 0.8.14 is the most stable production release ?? I just need some clarification on which version actually -is- stable enough for production use. Thanks for your help! Darren Nay VoIP Network Development Ionosphere, Inc dnay(a)ionosphere.net

2 1

[Serusers] RFC3261 Section 8.2.6.1
by Java Rockx 29 Apr '05

29 Apr '05

Hi All. This section of the RFC states this: 8.2.6.1 <http://8.2.6.1> Sending a Provisional Response One largely non-method-specific guideline for the generation of responses is that UASs SHOULD NOT issue a provisional response for a non-INVITE request. Rather, UASs SHOULD generate a final response to a non-INVITE request as soon as possible. Does this mean SER should never send a 1xx response for anything except INVITE messages? Regards, Paul

2 1

[Serusers] HELP: set max_contacts parameter on registrar module fail
by Charles Wang 29 Apr '05

29 Apr '05

Hi, ALL: I set the following line on my ser.cfg to limit the max registers. modparam("registrar", "max_contacts", 3) Then I restart my ser. I find that I can register more than 3 UACs to my ser. So I guess that the parameter max_contacts is not workable. Is it true? Does anybody have any idea/solution about it? -- Best Regards Charles

3 6

[Serusers] SER with Windows-Messenger in different subnets
by Hendrik Utsch 29 Apr '05

29 Apr '05

Hello all, we have a SIP Express Router located in 172.16.0.0/16 and several Windows Messenger clients, located in the same subnet as well, as in 192.168.190.0/24. All clients can establish successfully connections to other clients in the first subnet, but connections to clients in the second subnet end with "404 Not Found". The behaviour is very strange, since I got it to work with some clients in the second subnet, but then after a restart of the SER process it didn't work again. I definitely have changed nothing! Here is the conf file: # $Id: ser.cfg,v 1.11 2002/10/04 21:40:31 jiri Exp $ # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes# (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/print.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"sip.####.de") { if (method=="REGISTER") { save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } Thanks, Hendrik Utsch Dipl.-Ing. (FH) Systemtechnik eMail: hendrik.utsch(a)tecsphere.com TecSphere AG Standort Köln Claudiastraße 2b D-51149 Köln Deutschland Fon: +49 (2203) 89 11 506 Fax: +49 (2203) 89 11 111 http://www.tecsphere.com

2 1

[Serusers] radius acc in newest ser does not compile
by Wojciech Ziniewicz 29 Apr '05

29 Apr '05

I want to compile ACC module with Radius Accounting but uncommenting theese two lines as said in modules/acc/Makefile makes the "acc.so" disapear (it simply does not compile) 1.I have downloaded the SER v.0.9-0 from developer at berlios.de (not the cvs one). 2. I have built a *deb package since i have debian. Maybe it's debian specific ? 3. After a build I see whats in the ser_8.0-12.deb (the version is invalid :) ) and there's no module with that name. ============fragment from modules/acc/Makefile============== ... # uncomment the next two lines if you wish to enable RADIUS accounting # DEFS+=-DRAD_ACC -I/usr/include LIBS=-L/usr/lib -lradiusclient ... =============end of the fragment========================== -- Pozdrawiam, Wojciech Ziniewicz Optocomp sp.z.o.o, www.optocomp.pl mailto: wojtekz(a)optocomp.pl +48(0)691031535

2 1

[Serusers] Call to another host
by "Sebastian Kühner" 29 Apr '05

29 Apr '05

Hello, I have ser locally installed on 192.168.1.223 and asterisk on 192.168.1.222. I have two softphones: sip:13@192.168.1.222 (asterisk) and sip:14@192.168.1.223 (ser) If I want to call 14(a)192.168.1.223 (asterisk -> ser) it works perfectly, but if I want to call 13(a)192.168.1.222 (ser -> asterisk) the call fails (Call rejected: 403 forbidden). What do I make wrong?? Thanks! Sebastian -- +++ GMX - die erste Adresse f�r Mail, Message, More +++ 10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail

1 0

[Serusers] errors and warnings with serweb
by Llanos Serna García-Conde 29 Apr '05

29 Apr '05

2 1

RE: [Serusers] ACC into mysql
by Edgardo O. Gonzales II 29 Apr '05

29 Apr '05

Need for immediate resolution .. please help .. thanks, ed Hi! I appreciate your immediate feedback and Im so thankful for extending your help to me. However, after I followed the instruction you gave, this is what happened. speed:/usr/local/src/project/ser-0.8.14# /usr/local/ser/sbin/ser -f /usr/local/ser/etc/ser/ser.cfg start & [1] 23521 0(23521) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(23521) parse error (49,60-61): Can't set module parameter 0(23521) set_mod_param_regex: parameter <db_flag> not found in module <acc> 0(23521) parse error (50,29-30): Can't set module parameter I remember during my ser installation, I use make all. Will this enable my accounting using mysql. thanks, ed At 09:13 PM 4/26/2005, Matt Schulte wrote: > setflag(1); > setflag(2);

2 1

Rating engine (WAS : RE: [Serusers] radius acc in newest ser doe s not compile )
by Wojciech Ziniewicz 29 Apr '05

29 Apr '05

Okay, i've updated my version up to CVS and it's fine. I am making SER wroking for CDRTool evaluation version thus i had to have the RADIUS accounting compiled in. SER is a great peace of software. I have another question regarding to Your experience with billing. I've connected radius with mysql and SER. I have good accounting that gives me call duration, callee number, caller number and almost everything i want. cdrtool makes it readable for humans :) My question is - what rating (not billing) engines do you use ? I have very detailed call records in the csv'like format, but dont have an idea how to rate my subscribers. -----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Friday, April 29, 2005 2:35 PM To: Wojciech Ziniewicz Cc: 'serusers(a)lists.iptel.org'; Michal Podoski; Jacek Blaschke Subject: Re: [Serusers] radius acc in newest ser does not compile The version number comes from sip_router/debian/changelog. This file is usually updated then we build a new release. You can add a new entry there to fix the version number. The radius related modules are in a separate package, called ser-radius-modules. Jan. On 27-04-2005 12:08, Wojciech Ziniewicz wrote: > I want to compile ACC module with Radius Accounting but uncommenting theese > two lines as said in modules/acc/Makefile makes the "acc.so" disapear (it > simply does not compile) > > 1.I have downloaded the SER v.0.9-0 from developer at berlios.de (not the > cvs one). > 2. I have built a *deb package since i have debian. Maybe it's debian > specific ? > 3. After a build I see whats in the ser_8.0-12.deb (the version is invalid > :) ) and there's no module with that name. > > ============fragment from modules/acc/Makefile============== > ... > # uncomment the next two lines if you wish to enable RADIUS accounting > # > DEFS+=-DRAD_ACC -I/usr/include > LIBS=-L/usr/lib -lradiusclient > ... > =============end of the fragment========================== > -- > Pozdrawiam, > Wojciech Ziniewicz > Optocomp sp.z.o.o, www.optocomp.pl > mailto: wojtekz(a)optocomp.pl > +48(0)691031535 > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

LVS, load balancing, and stickness was ==> Re: [Serusers] more usrloc synchronization
by Greger V. Teigre 29 Apr '05

29 Apr '05

After my last email, I looked at ktcpvs and realized I ignored a couple of things: ktcpvs only supports tcp (http is obviously tcp-based, but I thought it supported udp for other protocols). I don't know how much work implementing udp would be. Here is a discussion of SIP and LVS that I found useful (though not encouraging). http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.services_that_dont_w… Paul: I'm starting to get really curious on the standard LVS components used for your stickiness! I'm not aware (also after searching now) of an LVS balancing mechanism that allows correct stickness on SIP udp...! And I found other too who are looking for it: http://archive.linuxvirtualserver.org/html/lvs-users/2005-02/msg00251.html My understanding is that ipvs must be extended (according to the developer) with a call-id based scheduler and that this work has several people willing to fund development, but that this has not(?) started yet. The problem is that ipvs is based on ip header analysis and extending the hashing algorithms to also include payload-based analysis is not straight-forward. g-) > With regards to stickiness: Have you looked at ktcpvs? SIP is an > "http-like" protocol and I'm pretty sure that you can use the > http-based regex hashing to search for Call-Id. If you cannot use it > right out of the box, I'm pretty sure the modifications are minimal. > The user location problem: With a cluster back-end, I also only > see save_memory() as the only option. > g-) > >> "Greger V. Teigre" <greger(a)teigre.com> wrote: >>> Greger, thanks a lot. >>> The problem with load balancer is that replies goes to the wrong >>> server due to rewriting outgoing a.b.c.d . BTW, as Paul pointed, if >>> you define some dummy interface with Virtual IP (VIP), there is no >>> need to rewrite outgoing messages (I tested this a little). >> >> >> Yes, if you use LVS with direct routing or tunneling, that is what >> you experience. >> ===Of course. That why I implemented small "session" stickness. >> However, it causes additional internal traffic. >> >> What I described was a "generic" SIP-aware load balancer where SIP >> messages would be rewritten and stickiness implemented based on ex. >> UA IP address (or call-id like vovida's load balancer). >> ====Sure, it's better solution; I think we'll go this way soon (in >> our next version). >> >>> Why DNS approach is bad (except restricted NAT - let's say I am >>> solving this)? >> >> Well, IMO, DNS SRV in itself is not bad. It's just that many user >> clients do not support DNS SRV yet. Except that, I like the concept >> and it will give you a geographical redundancy and load balancing. >> ===I am trying to build the following architecture: >> >> DNS (returns domain's public IP)->LVS+tunneling (Virtual IP)->ser >> clusters (with private IPs) >> >>> >> >>> >> DB >> (MySQL 4.1 cluster) >> >>> I guess, Paul utilizes load-balancer scenario you have described. >>> Believe there are only proprietary solutions for >>> "the-replies-problem". We tried Vovida call-id-persistence package, >>> unfortunately it didn't work for us. >> >> Are you referring to the load balancer proxy? IMHO, the SIP-aware >> load balancer makes things a bit messy. It sounds to me that the LVS >> + tunneling/direct routing + virtual IP on dummy adapter is a better >> solution. >> >>> In my configuration I use shared remote DB cluster (with >>> replication). Each ser see it as one-public-IP (exactly the approach >>> you named for SIP). May be it's good idea to use local DB clusters, >>> but if you have more than 2 servers your replication algorythm gonna >>> be complex. Additional problem - it still doesn't solve usrloc >>> synchronization - you still have to use t_replicate()... >> >> >> I'm not sure if I understand. >> ===Oh, probably I expressed myself not well enough... >> >> So, you have 2 servers at two location, each location with a shared >> DB and then replication across an IPsec tunnel?? >> IMHO, mysql 3.23.x two-way replication is quite shaky and >> dangerous to rely on. With no locking, you will easily get >> overwrites and you have to be very sure that your application doesn't >> mess up the DB. I haven't looked at mysql 4.1 clustering, but from >> the little I have seen, it looks good. Is that what you use? >> >> ===We have 2 or more servers with MysQL 4.1 virtual server (clusters >> balanced by LVS). We use MySQL for maintaining subscribers' accounts, >> not for location. User location is still in-memory only so far. I am >> afraid I have to switch to ser 09 in order to use save_memory (thanks >> Paul!) and forward_tcp() for replication. >> >>> With regard to t_replicate() - it doesn't work for more than 2 >>> servers, so I used exactly forward_tcp() and save_noreply() (you're >>> absolutely right - this works fine so far); all sers are happy. Of >>> course, this causes additional traffic. Interesting whether Paul's >>> FIFO patch reduces traffic between sers? >> >> I believe Paul uses forward_tcp() and save_memory() to save the >> location to the replicated server's memory, while the >> save("location") on the primary server will store to the DB (which >> then replicates on the DB level). >> g-) >> >> >> >> >> >> Do you Yahoo!? >> Yahoo! Small Business - Try our new resources site!

6 17

RE: [Serusers] what is the best way of using asterisk as B2BUA
by Kamran Ahmad 29 Apr '05

29 Apr '05

try onsip.org gettingstarted from downloads and use this ./make_and_install radius --- "Edgardo O. Gonzales II" <edgardo.g(a)pacific.net.ph> wrote: > > Hi All! > > May I know the basic modules / requirements if I > want to install > ser with acc and radius support.. > > Im using debian .. > > thanks, > ed > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] ser 0.9.0 & sems
by Grigory Fishilevich 29 Apr '05

29 Apr '05

Hi all, i try to configure ser 0.9.0 and sems_2004-07-27. i have some problems, i can't find the right infos or examples. have anybody a worked ser.cfg example or link to any website with some infos to ser+sems? many thanks, Grigory

2 2

Re: [Serusers] what is the best way of using asterisk as B2BUA
by Iqbal 29 Apr '05

29 Apr '05

As I mentioned I dont do combo anymore, it sdidnt make sense to me Iqbal Elton Machado wrote: >Hi, > > >Iqbal, please forward me an e.g. of this combo configuration , as I'm >willing also to have it to compare with my trials. > >Regards, > >Elton > > >-----Original Message----- >From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On >Behalf Of Iqbal >Sent: quinta-feira, 28 de Abril de 2005 11:43 >To: Kamran Ahmad >Cc: serusers(a)lists.iptel.org >Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA > >Hi > >I originally had a setup like this, but to me it just seemed way to >expensive to be doing this, since you will need to add asterisk boxes, >just to keep doing these "u-turns", and because you want the billing >info. Also, I started to have problem when I hit the external gateway, >because originally again i did this via asterisk, which then passing >data back to ser gave headaches. But if anyone gets this combo up and >running weel would be interested to know complete setup. > >Iqbal > >Kamran Ahmad wrote: > > > >>hello Carles Wang >> >>This is the way to to successfully call through >>asterisk. >> >>SER is Main Registrar. Asterisk is B2BUA. >> >>SER will route its call to asterisk. >>now control is at asterisk side he can do any thing to >>that call (forword, voicemail, etc....). but actually >>asterisk dont know who is the user he ll route this >>call back to SER who is aware of the user. >>it is like U-Turn through Asterisk. try this and tell >>me >> >> >> >> >>ser.cfg >>------------------------ >>rewritehostport("asterisk:port"); >>force_rport(); >>fix_nated_contact(); >>force_rtp_proxy(); >>t_relay(); >> >> >>sip.conf >>------------------------ >>[general] >>context=default >>port=5070 >>bindaddr=0.0.0.0 >>srvlookup=no >> >>[2000] >>callerid=2000 >>type=friend >>host=dynamic >>canreinvite=no >>reinvite=no >>qualify=yes >>auth=plaintext >>nat=yes >> >> >>[3000] >>type=friend >>host=dynamic >>callerid=3000 >>qualify=yes >>canreinvite=no >>reinvite=no >>auth=plaintext >>nat=yes >> >> >> >>--- Charles Wang <lazy.charles(a)gmail.com> wrote: >> >> >> >> >>>I also have the same problem. I don't know how to >>>fix it. Do you get >>>any solution or sample config about it. I think it >>>is a problem of >>>asterisk. >>> >>>On 4/28/05, Kamran Ahmad <p_kami(a)yahoo.com> wrote: >>> >>> >>> >>> >>>>hi list >>>> >>>>any person using ser and Asterisk as B2bUA. >>>> >>>>what is the best way of using asterisk as B2BUA. >>>> >>>>i can route calls to through asterisk its working >>>> >>>> >>>> >>>> >>>but >>> >>> >>> >>> >>>>some time one UA tries to hangup the call and the >>>>other side is not able to receive Bye >>>> >>>>what could be the best way of using asterisk for >>>>monitering voice >>>> >>>>Thanks >>>>Kamran >>>> >>>>__________________________________________________ >>>>Do You Yahoo!? >>>>Tired of spam? Yahoo! Mail has the best spam >>>> >>>> >>>> >>>> >>>protection around >>> >>> >>> >>> >>>>http://mail.yahoo.com >>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>> >>>> >>>> >>>-- >>> >>>Best Regards >>>Charles >>> >>> >>> >>> >>> >>__________________________________________________ >>Do You Yahoo!? >>Tired of spam? Yahoo! Mail has the best spam protection around >>http://mail.yahoo.com >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >>. >> >> >> >> >> > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > > >. > > >

3 4

[Serusers] Serweb
by Clay Bryan 29 Apr '05

29 Apr '05

I am opening the admin/index.php page and receive this error Warning: virtual(): Unable to include '/prolog.html' - request execution failed in /var/www/localhost/htdocs/serweb/page.php on line 48 sip-me User Management Warning: virtual(): Unable to include '/separator.html' - request execution failed in /var/www/localhost/htdocs/serweb/page.php on line 50 Warning: virtual(): Unable to include '/epilog.html' - request execution failed in /var/www/localhost/htdocs/serweb/page.php on line 145 I did these commands echo "<body><h1>" > prolog.html echo "</body>" > epilog.html echo "</h1><hr>" > separator.html and I'm still getting the errors any suggestions? Wercs Communications Clay Bryan Network Administrator Wercs Communications 400 East First Casper, WY 82601 <http://maps.yahoo.com/py/maps.py?Pyt=Tmap&addr=400+East+First&csz=Caspe r%2C+WY++82601&country=us> CBryan(a)wercs.com <mailto:CBryan@wercs.com> tel: fax: mobile: 307-233-8359 307-233-8701 307-258-7371 Add me to your address book... <https://www.plaxo.com/add_me?u=21475170292&v0=646557&k0=282754785> Want a signature like this? <http://www.plaxo.com/signature>

2 1

[Serusers] VM module ??
by Matt Schulte 29 Apr '05

29 Apr '05

Is the vm module deprecated? I noticed it's not in 091. If so is there an alternative? Searching the mailing list and not finding much regarding rhis. Maybe I'm crazy? :-)

3 2

[Serusers] onsip.org Registration Problem???
by Test User 29 Apr '05

29 Apr '05

I tried to register onsip.org a thousand times, but all I get is an error page displaying "cannot register user". I am filling the registration form legally, what may be the problem? Thanks!

2 3

[Serusers] May I use SER for business?
by bj1860 29 Apr '05

29 Apr '05

Hi May I use SER for business object--integrate it with 3rd party product ,sell it to the end user under GPL license ? Thanks Nick

1 0

[Serusers] Can't Register Cisco ATA - www_challege Fails
by Aaron W 29 Apr '05

29 Apr '05

I have SER setup on 10.9.8.7 which is on the internet. I have a Cisco ATA at home beind a linksys router. The ATA has an non-routeable ip of 192.168.1.107, while the public IP of my linksys router is 1.2.3.4 I can not get the cisco ATA to register, and i dont know why. I have posted results on Ngrep, also some debugging info from SER and my acutal ser.cfg In the setup for the ATA I gave it the proxy as an IP address (10.9.8.7), there is no place in the cisco config (that I can find) to specify a domain/realm. And the DNS server that my linksys router has doesnt have a route to sip1.jmusa.com Is that the problem, if so whats the best way around it? Results of ngrep: U 1.2.3.4:5060 -> 10.9.8.7:5060 REGISTER sip:10.9.8.7SIP/2.0..Via: SIP/2.0/UDP 192.168.1.107:5060;branch=z9hG4bKfac02618b73b6b6 a..From: Aaron <sip:8306@10.9.8.7;user=phone>;tag=3424024559..To: Aaron <sip:8306@10.9.8.7; user=phone>..Call-ID: 2834281883@192.168.1.107..CSeq: 3 REGISTER..Contact: Aaron <sip:8306@192.168.1. 107:5060;user=phone;transport=udp>;expires=3600..User-Agent: Cisco ATA 188 v3.2.0 atasip (041111A).. Authorization: Digest username="8306",realm="sip1.jmusa.com",nonce="427023d34e56189a2adcddfb16228dde9 f51f0eb",uri="sip:10.9.8.7",response="7b9e7ec34e8d4f8157fb66e140f95cbe"..Content-Length: 0.... # U 10.9.8.7:5060 -> 1.2.3.4:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP 192.168.1.107:5060;branch=z9hG4bKfac02618b73b6b6a;received=69.14 2.66.52..From: Aaron <sip:8306@10.9.8.7;user=phone>;tag=3424024559..To: Aaron <sip:8306@65.199.1 91.83;user=phone>..Call-ID: 2834281883@192.168.1.107..CSeq: 3 REGISTER..Server: Sip EXpress router (0 .9.0 (i386/linux))..Content-Length: 0..Warning: 392 10.9.8.7:5060 "Noisy feedback tells: pid=91 53 req_src_ip=1.2.3.4 req_src_port=5060 in_uri=sip:10.9.8.7out_uri=sip:10.9.8.7via_c nt==1".... # U 10.9.8.7:5060 -> 1.2.3.4:5060 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 192.168.1.107:5060;branch=z9hG4bKfac02618b73b6b6a;rport=50 60;received=1.2.3.4..From: Aaron <sip:8306@10.9.8.7;user=phone>;tag=3424024559..To: Aaron < sip:8306@10.9.8.7;user=phone>;tag=b27e1a1d33761e85846fc98f5f3a7e58.a0aa..Call-ID: 2834281883@192 .168.1.107..CSeq: 3 REGISTER..WWW-Authenticate: Digest realm="jmusa.com", nonce="427147ef446cc27cc8b6 502323243e02f9b5dfb6"..Server: Sip EXpress router (0.9.0 (i386/linux))..Content-Length: 0..Warning: 3 92 10.9.8.7:5060 "Noisy feedback tells: pid=9153 req_src_ip=1.2.3.4 req_src_port=5060 in_u ri=sip:10.9.8.7out_uri=sip:10.9.8.7via_cnt==1".... My messages: Apr 28 16:26:33 sip1 /sbin/ser[9148]: CLIENT NAT TEST 7 IS TRUE: From sip:8306@10.9.8.7;user=phone, To sip:8306@10.9.8.7;user=phone, Call ID: 2834281883(a)192.168.1.107, MESASGE ID 2 Apr 28 16:26:33 sip1 /sbin/ser[9148]: BEGIN WWW AUTH: From sip:8306@10.9.8.7;user=phone, To sip:8306@10.9.8.7;user=phone, Call ID: 2834281883(a)192.168.1.107, MESASGE ID 2 Apr 28 16:26:33 sip1 /sbin/ser[9148]: WWW AUTHFAIL PRE CHALLEGE: From sip:8306@10.9.8.7;user=phone, To sip:8306@10.9.8.7;user=phone, Call ID: 2834281883(a)192.168.1.107, MESASGE ID 2 ---Then nothing else...... My ser.cfg (snipped) ----snip---- if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; ----snip---- route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact: \*") && client_nat_test("7")) { xlog("L_ERR","CLIENT NAT TEST 7 IS TRUE: From %fu, To %tu, Call ID: %ci, MESASGE ID %mi"); setflag(6); fix_nated_register(); force_rport(); }; xlog("L_ERR","BEGIN WWW AUTH: From %fu, To %tu, Call ID: %ci, MESASGE ID %mi"); if (!www_authorize("sip1.jmusa.com","subscriber")) { xlog("L_ERR"," WWW AUTHFAIL PRE CHALLEGE: From %fu, To %tu, Call ID: %ci, MESASGE ID %mi"); www_challenge("sip1.jmusa.com","0"); xlog("L_ERR"," WWW AUTHFAIL POST CHALLEGE From %fu, To %tu, Call ID: %ci, MESASGE ID %mi"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; }

3 4

[Serusers] Serweb
by Clay Bryan 28 Apr '05

28 Apr '05

Hi, Where do I find serweb fro ser 0.8.14. I have looked on berlios site and have had no luck. Wercs Communications Clay Bryan Network Administrator Wercs Communications 400 East First Casper, WY 82601 <http://maps.yahoo.com/py/maps.py?Pyt=Tmap&addr=400+East+First&csz=Caspe r%2C+WY++82601&country=us> CBryan(a)wercs.com <mailto:CBryan@wercs.com> tel: fax: mobile: 307-233-8359 307-233-8701 307-258-7371 Add me to your address book... <https://www.plaxo.com/add_me?u=21475170292&v0=646557&k0=282754785> Want a signature like this? <http://www.plaxo.com/signature>

2 1

[Serusers] Public IP Register Problem !!!
by Felipe Martins 28 Apr '05

28 Apr '05

Hi guys, I have 2 SER Servers talking to each other, working in a Private network using 192.168.4.0/16 authenticating at a mysql server (everything is for test, so the configuration is very basic). Everything works perfect, I have 4 users registered in each server, and everybody is talking to each other with no problem. My next step was to test my architecture with public IPs, so I've changed my ser.cfg to reflect my ip changes, and also configured 4 clientes (2 at each server) with public IPs, but my clients now, can't register, none of them in any server. I can see at the logs that the REGISTER Request reaches my server but the clients can't register. I also tried to use some other private network at some clients but they can't register either. So, any network could be used to make it work, but 192.168.4.0/16. I know it's probably a configuration error I've made, but I can't find where the error is. I'm sending my ser.cfg for you to see. Any hand will be pleased. Best Regards # -------------- SER.CFG ------------------------ # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ # Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=no #listen=200.142.96.218 listen=192.168.4.10 port=5060 alias="mundivox.com" alias="sipserver.com" #alias="200.201.187.254" alias="192.168.4.10" # sip_warning - Should replies include extensive warnings? By default # yes, it is good for trouble-shooting #sip_warnings=yes # server_signature - Should locally-generated messages include server's # signature? By default yes, it is good for trouble-shooting. server_signature=yes # reply_to_via - A hint reply modules whether they should send reply # to IP advertised in Via. Turned off by default, which means that # replies are sent to IP address from which requests came. # reply_to_via=no # mhomed -- enable calculation of outbound interface; useful on # multihomed servers. # mhomed=0 check_via=yes # (cmd. line: -v) dns=yes # (cmd. line: -r) rev_dns=yes # (cmd. line: -R) children=4 fifo_mode=0666 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # ------------- external module loading loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" #loadmodule "/usr/local/lib/ser/modules/print.so" loadmodule "/usr/local/lib/ser/modules/enum.so" loadmodule "/usr/local/lib/ser/modules/textops.so" #loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/uri.so" #loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" #loadmodule "/usr/local/lib/ser/modules/speeddial.so" #loadmodule "/usr/local/lib/ser/modules/options.so" #loadmodule "/usr/local/lib/ser/modules/rtpproxy.so" # ----------------- setting module-specific parameters --------------- # ------------- db_url setting #modparam("acc|auth_db|domain|group|speeddial|uri_db|usrloc", # "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "db_url", "mysql://ser:heslo@localhost/ser") # ------------- use_domain setting modparam("auth_db|group|speeddial|uri_db|usrloc", "use_domain", 1) # ------------- accounting parameters modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) #modparam("acc", "db_flag", 1) #modparam("acc", "db_missed_flag", 1) #modparam("acc", "log_fmt", "cdfimorstup") #modparam("acc", "failed_transactions", 1) #modparam("acc", "report_cancels", 1) #modparam("acc", "report_ack", 0) # ------------- auth parameters # allows clear text passwords in the mysql database modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # ------------- domain parameters modparam("domain", "db_mode", 1) # ------------- exec parameters modparam("exec", "setvars", 1) modparam("exec", "time_to_kill", 10) # ------------- registration parameters modparam("registrar", "nat_flag", 2) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 86400) modparam("registrar", "default_expires", 3600) modparam("registrar", "desc_time_order", 1) modparam("registrar", "append_branches", 1) modparam("registrar", "use_domain", 1) #-------------- nathelper parameters #modparam("nathelper", "natping_interval", 30) #modparam("nathelper", "ping_nated_only", 1) # ------------- rr parameters # set ";lr" tag to lr=true modparam("rr", "enable_full_lr", 1) # ------------- tm parameters modparam("tm", "fr_timer", 20) modparam("tm", "fr_inv_timer", 40) modparam("tm", "wt_timer", 5) # ------------- usrloc parameters # 0 = disable # 1 = write-through # 2 = write-back modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 60) modparam("usrloc", "desc_time_order", 1) # ------------- logging parameters modparam("xlog", "buf_size", 8192) # Checking for Username Column #modparam("auth_db", "user_column", "username") # Checking for Domain Column #modparam("auth_db", "domain_column", "domain") # ------------- logging parameters modparam("xlog", "buf_size", 8192) # ------------------------- request routing logic ------------------- # main routing logic route { # ---------------------------------------------------------------------------- # Sanity Checks -- messages with max_forwards==0, or excessively long requests #----------------------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # ------------------------------------------------------------------------ # NOTIFY Keep-Alive Section # ------------------------------------------------------------------------ if ((method=="NOTIFY") && search("^Event: keep-alive")) { sl_send_reply("200", "OK"); break; }; if ((method=="NOTIFY") && (uri=~"^sip:700@")) { sl_send_reply("200", "OK"); break; }; # ------------------------------------------------------------ # OPTIONS Section # # This is used by sipsak to monitor the heath of our sip proxy #------------------------------------------------------------- # if (search("^From: sip:sipsak@") && # (method=="OPTIONS") && (!uri=~"sip:.*[@]+.*")) { # options_reply(); # break; # }; # ------------------------------------------------------------ # Registration Section # ------------------------------------------------------------ # if (method=="REGISTER") { # # if (!is_from_local()) { # # sl_send_reply("403", "Unknown Domain"); # break; # }; # # if (is_user_in("Request-URI", "disabled")) { # # sl_send_reply("403", "Your evaluation period has expired"); # break; # }; # # if (!www_authorize("", "subscriber")) { # # www_challenge("", "0"); # break; # }; # # if (!check_to()) { # # sl_send_reply("401", "Unauthorized"); # break; # }; # # if (!save("location")) { # # sl_reply_error(); # }; # # break; # # }; # ----------------------------------------------------------------- # Open Relay Section # ----------------------------------------------------------------- # if (method=="INVITE") { # # if (!(is_from_local() || is_uri_host_local())) { # sl_send_reply("403", "Please register to use our service"); # break; # }; # }; # ----------------------------------------------------------------- # Accounting Section # ----------------------------------------------------------------- # if (method=="INVITE" || method=="BYE") { # setflag(1); # }; # ----------------------------------------------------------------- # Record Route Section # # we record-route all messages -- to make sure that subsequent messages # will go through our proxy; that's particularly good if upstream and # donwstream entities use different transport protocol # ----------------------------------------------------------------- if (!method=="REGISTER") { record_route(); }; if (method=="INVITE") record_route(); log(1, "INVITE message received\n"); # ----------------------------------------------------------------- # Loose Route Section # # Grant route routing if route headers present # ----------------------------------------------------------------- if (loose_route()) { route(2); break; }; # ----------------------------------------------------------------- # Alias Routing Section # ----------------------------------------------------------------- lookup("aliases"); if (!uri==myself) { route(2); break; }; # ------------------------------------------------------------------------ # Anonymous Call Rejection Section # ------------------------------------------------------------------------ if (isflagset(24) && (method=="INVITE") && search("^(f|F)rom:.*(a|A)nonymous")) { route(8); break; }; # ------------------------------------------------------------------------ # Call Block Section # ------------------------------------------------------------------------ # if (is_caller_blocked()) { # route(7); # break; # }; # ------------------------------------------------------------------------ # Do Not Disturb Section # ------------------------------------------------------------------------ # if (avp_db_load("$ruri/username", "s:donotdisturb")) { # if (avp_check("s:donotdisturb", "eq/y/i")) { # route(5); # break; # }; # }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol #record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # Rota usada para guardar Logs no CDRTool - Billing # if (method=="REGISTER" || method=="INVITE" || method=="BYE" || method=="CANCEL") { # # Salvar mensagens no myslq para o CDRTool # exec_msg("/var/www/html/serweb/sertrace.py; exit 1"); # }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # uri==myself retorna true se o nome de dominio URI for igual ao nome do # host ao qual SER esta rodando. Para configurar quais domain names o ser # aceita, deve-se configurar os ALIASES do sistema para tais nomes. if (uri==myself) { if (method=="REGISTER") { log(1, "REGISTER message received\n"); # Uncomment this if you want to use digest authentication if (!www_authorize("192.168.4.10", "subscriber")) { www_challenge("192.168.4.10", "0"); break; }; save("location"); break; }; # Repassando Chamadas Internacionais para Asterisk if (uri=~"^sip:[2][0-9].*@") { log(1, "Forwarding to Another Gateway - SIPProxy2 to SIPProxy1\n"); setflag(1); # MARK FOR ACCOUNTING rewritehost("192.168.4.11"); forward(192.168.4.11,5060); t_relay(); break; } # ---------------------------------------------------------------- # Call Routing Section # ---------------------------------------------------------------- if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } # ------------------ EOF ------------------------- -- Felipe Martins Mundivox Communications Tecnologia e Projetos fmartins(a)mundivox.com Tel.: +55 +21 +3820 8839 Cel.: +55 +21 +9823 8602 Fax.: +55 +21 +3820 8844 www.mundivox.com

2 1

Re: [Serusers] Calling members of SER
by "Sebastian Kühner" 28 Apr '05

28 Apr '05

Thanks for ur answer, Well, the problem is, that in "location" always appears "@200.52.29.189" (IP changed ;-)... which isn't the local IP-Address... so it doesn't work. Sebastian Iqbal <iqbal(a)gigo.co.uk> schrieb am 28.04.05 20:09:01: > > sip orxy settings, should be your sip server, then call will go through > there, it will use the location entries to see what other sip phone has > been connected and then send to that IP address > > Iqbal > > Sebastian Kühner wrote: > > >Hello, > > > >I'm new here... and I have question very simple (I hope). > > > >I have a local network. Ser is running on 192.168.1.223 and I have two Softphones connectes with ser (192.168.1.100 and 192.168.1.51). There is no problem to call the Softphones like <user1>@192.168.1.100 or <user2>@192.168.1.51 ... using their IP-Addresses. > > > >But I want to call the users like this: <user1>@192.168.1.223 or <user2>@192.168.1.223 ... using the IP-Address of the Sip Express Router. > > > >What do I have to put to my ser.cfg file???? > > > >Thanks!!! > > > >Sebastian > >______________________________________________________________ > >Verschicken Sie romantische, coole und witzige Bilder per SMS! > >Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193 > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > >. > > > > > > _______________________________________________________________ Fruhlings-Aktion: Gratis DSL-Modems zur freien Auswahl Nur bis 30. April bei WEB.DE DSL! https://dsl.web.de/?mc=021193

1 0

[Serusers] Calling members of SER
by "Sebastian Kühner" 28 Apr '05

28 Apr '05

Hello, I'm new here... and I have question very simple (I hope). I have a local network. Ser is running on 192.168.1.223 and I have two Softphones connectes with ser (192.168.1.100 and 192.168.1.51). There is no problem to call the Softphones like <user1>@192.168.1.100 or <user2>@192.168.1.51 ... using their IP-Addresses. But I want to call the users like this: <user1>@192.168.1.223 or <user2>@192.168.1.223 ... using the IP-Address of the Sip Express Router. What do I have to put to my ser.cfg file???? Thanks!!! Sebastian ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

1 0

[Serusers] Vovida's B2BUA and SER ?
by Lucas Aimaretto 28 Apr '05

28 Apr '05

Hi there, You know I've got good results with Vovida's b2bua, because I'm trying to use the session-timeout attribute for prepaid users. It works nicely. Nicely if the User has NO PASSWORD ASSIGNED ... This is the configuration: UA <----> B2BUA <---> SER | | RADIUS AT Register Time, there are no problems. b2bua sends the REGISTER message ( with digest-attrbiutes ) to radius, and the UA gets registered, with no problems ( with or without password it works fine ). When an INVITE is sent ... b2bua sends Authorization to RADIUS ... but as User-Password value, it sends a dot ( yes!!! a DOT "." ) ... look rad_recv: Access-Request packet from host 192.168.1.253:1024, id=1, length=82 User-Name = "1992001" User-Password = "." NAS-IP-Address = 192.168.1.253 NAS-Port = 1000 Called-Station-Id = "543515684478" Calling-Station-Id = "1992001" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 228 modcall[authorize]: module "preprocess" returns ok for request 228 modcall[authorize]: module "attr_filter" returns noop for request 228 modcall[authorize]: module "chap" returns noop for request 228 modcall[authorize]: module "digest" returns noop for request 228 rlm_realm: No '@' in User-Name = "1992001", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 228 radius_xlat: '1992001' rlm_sql (sql): sql_set_user escaped user --> '1992001' radius_xlat: 'rad_authorize_check_query '1992001'' rlm_sql (sql): Reserving sql socket id: 1 radius_xlat: '' radius_xlat: 'rad_authorize_reply_query '1992001','543515684478'' radius_xlat: '' rlm_sql (sql): No matching entry in the database for request from user [1992001] rlm_sql (sql): Released sql socket id: 1 modcall[authorize]: module "sql" returns notfound for request 228 modcall: group authorize returns ok for request 228 Entro a rad_check_password auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. .... obviously, the user will never authenticate. I know this is not the place for asking this, but vovidas mailing list is not working and I thought that someone my have been thru this problem already. Any help would be really appreciated.... if not, any help with other b2bua would be very helpful too. Regards, Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.4 - Release Date: 27/04/2005

2 5

RE: [Serusers] handling failure after directing to application server
by Greg Martin 28 Apr '05

28 Apr '05

What I see happen is a 404 comes back (in the reply route) and then is identified as a failure. At that point I revert to the original address, set a flag and relay. The relay cause the route logic to run so I check for the flag so not to send to the application server but the flag is never set. I tried sending a trying before sending to the application server but it doesn't change the behaviour. > -----Original Message----- > From: Iqbal [mailto:iqbal@gigo.co.uk] > Sent: Thursday, April 28, 2005 9:28 AM > To: Greg Martin > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] handling failure after directing to > application server > > Hi > > I re-read my reply, and didnt follow it either :-) > > From what I understand , if there is a loose_route then it > goes to route[1], and then in route[1] call is relayed, and > when there is a reply goto on_reply route, and you should see > > xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); } > > After this Log is displayed, where are you going back to. If > you get a reply, then you will not goto into failure route > and get your flag set, and the failure, shouldnt that be > after the relay. Even I'm getting confused now :-). > > In fact I have a question , is a failure, also considered a > reply, which means that t_on_failure should come before > t_on_reply....I am not sure about this so will post a > separate question > > iqbal > > > > Greg Martin wrote: > > > > >I don't understand your reply. At the bottom of the config > there is a onreply_route and a failure_route and the logging > statements in each do get written out. What I don't see is > isflagset(1) return true. > > > > > > > >>-----Original Message----- > >>From: Iqbal [mailto:iqbal@gigo.co.uk] > >>Sent: Wednesday, April 27, 2005 4:51 PM > >>To: Greg Martin; serusers(a)lists.iptel.org > >>Subject: Re: [Serusers] handling failure after directing to > >>application server > >> > >> > >>on failure and reply you are telling it where to go, but that route > >>doesnt exist, or not at least in ur config given below. > >> > >>Also route [2] doesnt really do anything.. > >> > >>Iqbal > >> > >>On 4/27/2005, "Greg Martin" <Greg.Martin(a)TELUS.COM> wrote: > >> > >> > >> > >>>I'm trying to direct requests to registered users to another proxy > >>>which has an application server. Right now the proxy simply > >>> > >>> > >>sends a 404 back. In that case I want to simply complete the call. > >>What I am doing is looping until the ser has had enough. > I've tried to > >>set a flag to prevent it but the flag is in fact never set although > >>the logs indicate it's the same transaction. Any comments? > >> > >> > >>>debug=3 > >>>fork=yes > >>>log_stderror=no > >>>dns=no > >>>rev_dns=no > >>>fifo="/tmp/ser_fifo" > >>>fifo_db_url="mysql://ser:heslo@localhost/ser" > >>> > >>>loadmodule "/usr/local/lib/ser/modules/mysql.so" > >>>loadmodule "/usr/local/lib/ser/modules/sl.so" > >>>loadmodule "/usr/local/lib/ser/modules/tm.so" > >>>loadmodule "/usr/local/lib/ser/modules/rr.so" > >>>loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >>>loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >>>loadmodule "/usr/local/lib/ser/modules/registrar.so" > >>>loadmodule "/usr/local/lib/ser/modules/exec.so" > >>>loadmodule "/usr/local/lib/ser/modules/xlog.so" > >>> > >>>modparam("usrloc", "db_mode", 1) > >>>modparam("rr", "enable_full_lr", 1) > >>> > >>>route { > >>> > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # Sanity Check Section > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> if (!mf_process_maxfwd_header("10")) { > >>> sl_send_reply("483", "Too Many Hops"); > >>> break; > >>> }; > >>> > >>> if (msg:len > max_len) { > >>> sl_send_reply("513", "Message Overflow"); > >>> break; > >>> }; > >>> > >>> xlog("L_NOTICE", "Method <%rm> r-uri <%ru>\n"); > >>> > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # Record Route Section > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> if (method != "REGISTER") { > >>> record_route(); > >>> }; > >>> > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # Loose Route Section > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> if (loose_route()) { > >>> route(1); > >>> break; > >>> }; > >>> > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # Call Type Processing Section > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> if (uri != myself) { > >>> route(1); > >>> break; > >>> }; > >>> > >>> if (uri == myself) { > >>> if (method == "REGISTER") { > >>> route(2); > >>> break; > >>> }; > >>> > >>> if (!lookup("location")) { > >>> sl_send_reply("404", "User Not Found"); > >>> break; > >>> }; > >>> > >>> route(1); > >>> }; > >>>} > >>> > >>>route[1] { > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # Default Message Handler > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> xlog("L_NOTICE", "route[1] *****\n"); > >>> > >>> t_on_reply("1"); > >>> > >>> if(isflagset(1)) > >>> { > >>> xlog("L_NOTICE", "RELAYING.\n"); > >>> resetflag(1); > >>> if (!t_relay()) { > >>> sl_reply_error(); > >>> break; > >>> }; > >>> }; > >>> > >>> t_on_failure("1"); > >>> > >>> t_relay_to_udp("app_servers_address", "5060"); > >>> > >>> > >>>} > >>> > >>>route[2] { > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> # REGISTER Message Handler > >>> # > >>> > >>> > >>-------------------------------------------------------------- > >>---------- > >> > >> > >>> if (!save("location")) { > >>> sl_reply_error(); > >>> }; > >>>} > >>> > >>>onreply_route[1] { > >>> xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); } > >>> > >>>failure_route[1] { > >>> setflag(1); > >>> xlog("L_NOTICE", "FAILURE LOGIC.\n"); > >>> revert_uri(); > >>> append_branch(); > >>> t_relay(); > >>>} > >>> > >>>Greg Martin > >>>Technology & Operations > >>>TELUS Communication Inc. > >>>office: 780-493-2786 > >>>cell: 780-718-4139 > >>> > >>>_______________________________________________ > >>>Serusers mailing list > >>>serusers(a)lists.iptel.org > >>>http://lists.iptel.org/mailman/listinfo/serusers > >>> > >>> > >>> > >>> > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > >. > > > > > > >

1 0

RE: [Serusers] handling failure after directing to application server
by Greg Martin 28 Apr '05

28 Apr '05

I don't understand your reply. At the bottom of the config there is a onreply_route and a failure_route and the logging statements in each do get written out. What I don't see is isflagset(1) return true. > -----Original Message----- > From: Iqbal [mailto:iqbal@gigo.co.uk] > Sent: Wednesday, April 27, 2005 4:51 PM > To: Greg Martin; serusers(a)lists.iptel.org > Subject: Re: [Serusers] handling failure after directing to > application server > > > on failure and reply you are telling it where to go, but that > route doesnt exist, or not at least in ur config given below. > > Also route [2] doesnt really do anything.. > > Iqbal > > On 4/27/2005, "Greg Martin" <Greg.Martin(a)TELUS.COM> wrote: > > >I'm trying to direct requests to registered users to another proxy > >which has an application server. Right now the proxy simply > sends a 404 back. In that case I want to simply complete the > call. What I am doing is looping until the ser has had > enough. I've tried to set a flag to prevent it but the flag > is in fact never set although the logs indicate it's the same > transaction. Any comments? > > > >debug=3 > >fork=yes > >log_stderror=no > >dns=no > >rev_dns=no > >fifo="/tmp/ser_fifo" > >fifo_db_url="mysql://ser:heslo@localhost/ser" > > > >loadmodule "/usr/local/lib/ser/modules/mysql.so" > >loadmodule "/usr/local/lib/ser/modules/sl.so" > >loadmodule "/usr/local/lib/ser/modules/tm.so" > >loadmodule "/usr/local/lib/ser/modules/rr.so" > >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >loadmodule "/usr/local/lib/ser/modules/registrar.so" > >loadmodule "/usr/local/lib/ser/modules/exec.so" > >loadmodule "/usr/local/lib/ser/modules/xlog.so" > > > >modparam("usrloc", "db_mode", 1) > >modparam("rr", "enable_full_lr", 1) > > > >route { > > > > # > -------------------------------------------------------------- > ---------- > > # Sanity Check Section > > # > -------------------------------------------------------------- > ---------- > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483", "Too Many Hops"); > > break; > > }; > > > > if (msg:len > max_len) { > > sl_send_reply("513", "Message Overflow"); > > break; > > }; > > > > xlog("L_NOTICE", "Method <%rm> r-uri <%ru>\n"); > > > > # > -------------------------------------------------------------- > ---------- > > # Record Route Section > > # > -------------------------------------------------------------- > ---------- > > if (method != "REGISTER") { > > record_route(); > > }; > > > > # > -------------------------------------------------------------- > ---------- > > # Loose Route Section > > # > -------------------------------------------------------------- > ---------- > > if (loose_route()) { > > route(1); > > break; > > }; > > > > # > -------------------------------------------------------------- > ---------- > > # Call Type Processing Section > > # > -------------------------------------------------------------- > ---------- > > if (uri != myself) { > > route(1); > > break; > > }; > > > > if (uri == myself) { > > if (method == "REGISTER") { > > route(2); > > break; > > }; > > > > if (!lookup("location")) { > > sl_send_reply("404", "User Not Found"); > > break; > > }; > > > > route(1); > > }; > >} > > > >route[1] { > > # > -------------------------------------------------------------- > ---------- > > # Default Message Handler > > # > -------------------------------------------------------------- > ---------- > > xlog("L_NOTICE", "route[1] *****\n"); > > > > t_on_reply("1"); > > > > if(isflagset(1)) > > { > > xlog("L_NOTICE", "RELAYING.\n"); > > resetflag(1); > > if (!t_relay()) { > > sl_reply_error(); > > break; > > }; > > }; > > > > t_on_failure("1"); > > > > t_relay_to_udp("app_servers_address", "5060"); > > > > > >} > > > >route[2] { > > # > -------------------------------------------------------------- > ---------- > > # REGISTER Message Handler > > # > -------------------------------------------------------------- > ---------- > > if (!save("location")) { > > sl_reply_error(); > > }; > >} > > > >onreply_route[1] { > > xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); } > > > >failure_route[1] { > > setflag(1); > > xlog("L_NOTICE", "FAILURE LOGIC.\n"); > > revert_uri(); > > append_branch(); > > t_relay(); > >} > > > >Greg Martin > >Technology & Operations > >TELUS Communication Inc. > >office: 780-493-2786 > >cell: 780-718-4139 > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > > >

2 1

[Serusers] volume traffic handling using SER
by Iqbal 28 Apr '05

28 Apr '05

Hi Has anyone interconnected SER with audiocodes (SIP version), or any other originating hardware, eg call centers etc. If so how did you configure SER, since I am guessing there will only be one INVITE, or will the device send a new INVITE per call, if the latter then I guess you just let ser handle as it normally would, and advice , pointers tips, would really help iqbal

1 0

Re: [Serusers] what is the best way of using asterisk as B2BUA
by Kamran Ahmad 28 Apr '05

28 Apr '05

hello Carles Wang This is the way to to successfully call through asterisk. SER is Main Registrar. Asterisk is B2BUA. SER will route its call to asterisk. now control is at asterisk side he can do any thing to that call (forword, voicemail, etc....). but actually asterisk dont know who is the user he ll route this call back to SER who is aware of the user. it is like U-Turn through Asterisk. try this and tell me ser.cfg ------------------------ rewritehostport("asterisk:port"); force_rport(); fix_nated_contact(); force_rtp_proxy(); t_relay(); sip.conf ------------------------ [general] context=default port=5070 bindaddr=0.0.0.0 srvlookup=no [2000] callerid=2000 type=friend host=dynamic canreinvite=no reinvite=no qualify=yes auth=plaintext nat=yes [3000] type=friend host=dynamic callerid=3000 qualify=yes canreinvite=no reinvite=no auth=plaintext nat=yes --- Charles Wang <lazy.charles(a)gmail.com> wrote: > I also have the same problem. I don't know how to > fix it. Do you get > any solution or sample config about it. I think it > is a problem of > asterisk. > > On 4/28/05, Kamran Ahmad <p_kami(a)yahoo.com> wrote: > > hi list > > > > any person using ser and Asterisk as B2bUA. > > > > what is the best way of using asterisk as B2BUA. > > > > i can route calls to through asterisk its working > but > > some time one UA tries to hangup the call and the > > other side is not able to receive Bye > > > > what could be the best way of using asterisk for > > monitering voice > > > > Thanks > > Kamran > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > -- > > Best Regards > Charles > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[Serusers] Groß/Klein-Schreibung mit SER und Windows-Messenger
by Hendrik Utsch 28 Apr '05

28 Apr '05

Sehr geehrte Damen und Herren, bei der Verwendung des Sip Express Routers in Verbindung mit dem Windows-Messenger kann es zu Problemen kommen, da beide Produkte Case-sensitive arbeiten, der Windows-Messenger sich aber die Groß- oder Klein-Schreibung der SIP-URI merkt. Hat man z.B. den Namen fälschlicherweise klein geschrieben, so wird der Windows-Messenger auch bei weiteren Verbindungsversuchen den kleingeschriebenen Namen verwenden, auch wenn man ihn fortan richtig schreibt. Der Verbindungsaufbau endet jedes Mal mit der Fehlermeldung "404 Not Found"! Dieser Umstand hat mich drei Tage mühevollen Suchens gekostet. Es wäre schön, wenn ein Hinweis hierzu auf die issues-Liste von iptel.org aufgenommen werden könnte! Es reicht allerdings sich mit dem Windows-Messenger ab- und wieder an-zumelden, damit er den "falschen" Namen wieder vergisst! Mit freundlichen Grüßen Hendrik Utsch Dipl.-Ing. (FH) Systemtechnik eMail: hendrik.utsch(a)tecsphere.com

1 0

[Serusers] HELP!!!RTPProxy!!
by jenny 28 Apr '05

28 Apr '05

Hi, I download rtpproxy from http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/. But now I can't install it properly. I can't run 'configure' script. My operate system is RedHat9.0. Can you tell me how to deal with it? Thanks a lot!! 　　　　　　　　jenny 　　　　　　　　xueyou38(a)tom.com 　　　　　　　　　　2005-04-28

1 0

[Serusers] serweb (directory index forbidden)
by Llanos Serna García-Conde 28 Apr '05

28 Apr '05

2 1

[Serusers] redirect to another gateway
by Nhadie 28 Apr '05

28 Apr '05

Hi All, How can I redirect calls to pstn to another gateway when one gateway doesn't respond to an INVITE (maybe because it has a problem), or when that gateway sends me 503 service unavailable or 404 not found. TIA Nhadie

3 2

RE: [Serusers] Working ser.cfg with mySQL authentication
by Graham Lewis 28 Apr '05

28 Apr '05

Thanks Leon - that seem to have fixed that problem. Graham Lewis -----Original Message----- From: Leon Sun [mailto:leon.sun@keywestcommunications.com] Sent: 27 April 2005 20:11 To: info(a)beeplove.com; Graham Lewis; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication Delete modparam("auth_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") from your cfg. In my cfg(0.8.14), I never used it and it works. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of m36828253-1(a)imap.1and1.com Sent: April 27, 2005 10:02 AM To: graham.lewis(a)spitfire.co.uk; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication According to error log, you should have syntax error in here: fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" but these two lines looks good to me. Are you sure, ser -E is using this configuration file? why dont you try with -f switch, like ser -E -f /etc/ser/ser.cfg, assuming your ser configuration file located at /et/ser/ser.cfg. Thanks, Mohammad Here is the start of the ser.cfg that shows errors: dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" modparam("auth_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- # ser -E 0(50633) parse error (5,1-12): syntax error 0(50633) parse error (5,12-13): unknown config variable 0(50633) parse error (7,1-11): ERROR: bad config file (3 errors) -----Original Message----- From: m36828253-1(a)imap.1and1.com [mailto:m36828253-1@imap.1and1.com] Sent: 27 April 2005 17:36 To: Graham Lewis; serusers(a)lists.iptel.org Subject: RE: [Serusers] Working ser.cfg with mySQL authentication HI Graham, This log says, there have syntax error in your configuration file. Why don't you post first 10/15 lines of you configuration file. Thanks, Mohammad Original Message: ----------------- From: Graham Lewis graham.lewis(a)spitfire.co.uk Date: Wed, 27 Apr 2005 17:20:15 +0100 To: serusers(a)lists.iptel.org Subject: [Serusers] Working ser.cfg with mySQL authentication Does anyone have a working example of ser.cfg with mySQL authentication they can share please. I have version 03a of the Onsip "SER Getting Started" documentation but the example given results is errors: # ser 0(49443) parse error (8,1-12): syntax error 0(49443) parse error (8,12-13): unknown config variable 0(49443) parse error (10,1-11): ERROR: bad config file (3 errors) # I think the Onsip doc. authors acknowledge this but have not updated the doc. yet. Graham Lewis _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] sorry -- cannot open write fifo
by Ramakrishnan_S 28 Apr '05

28 Apr '05

Hi I have installed latest version of SER. I have been getting this error message "sorry -- cannot open write fifo" . There is a permission on the FIFO fr httpd process to read and write. But still I am getting error. Any pointers for to resolve this will be helpful. Thanks Rama DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated.

1 0

[Serusers] Runaway SER processes fully using CPU
by Cameron Beattie 28 Apr '05

28 Apr '05

I have experienced a situation where SER (0.9.1) has stopped processing all register requests. Note I am also running mediaproxy 1.3.0. TOP shows 8 ser processes running each using between 10-15% CPU. There is one zombie process which is shown as [SER] <defunct> when I do a ps ax. There are only 9 running processes (8 SER + top). This is a test server that is not doing anything else and I am simply trying to register 1 UA against it. The server was running fine for a few days and then suddenly went AWOL. I looked back through the log and found the following although I don't think this is causing the current problem Apr 25 20:36:51 beta mediaproxy[23057]: command request E4CFFBCB-05BF-4204-9F82-3AE0BB64F9F5(a)192.168.0.15 60.234.199.XXX:8000:audio 60.234.199.XXX beta.mydomain.co.nz remote 60.234.199.XXX remote X-Lite=20release=201103m info=from:beattiec@beta.mydomain.co.nz,to:beattiea@beta.mydomain.co.nz,fromtag:274519666,totag: Apr 25 20:36:51 beta mediaproxy[23057]: Traceback (most recent call last): File "/usr/local/bin/mediaproxy/modules/rtphandler.py", line 856, in __findRTPSlot dsock.bind((proxyIP, port)) File "<string>", line 1, in bind error: (99, 'Cannot assign requested address') Apr 25 20:36:51 beta mediaproxy[23057]: error: cannot create session for 'E4CFFBCB-05BF-4204-9F82-3AE0BB64F9F5(a)192.168.0.15': cannot find enough free ports for the media streams Any suggestions on what's the best way to try and find out what's causing it? Shouting "Stop" loudly did not work. Killing SER and starting again would probably work but I'd rather try to find out what went wrong. Maybe these are the pleasures of using a non-stable version? Regards Cameron

1 0

[Serusers] HELP: how to get correct call duration??
by Charles Wang 28 Apr '05

28 Apr '05

Hi, ALL: I know ser can insert INVITE & BYE records to acc table. Maybe the timestamp of BYE record is correct but the timestamp of INVITE is not equal to the call start(after the callee answered). Is there any method to generate a record with timestamp when the callee answer? I think that it should be the callee responses "200 OK" after "100 Trying". How to do it??? -- Best Regards Charles

2 2

[Serusers] HELP: lookup("aliases")
by Charles Wang 28 Apr '05

28 Apr '05

Hi, ALL: I have an username '1011' on my subscriber table and I want my 1011 can map to a name 'charles' for alias on my aliases table. all subscribers and aliases are the same domain. But I use lookup("aliases"), and I have a record on aliases table. ------------------------------------------------------------------------------------------------- username domain contact ------------------------------------------------------------------------------------------------- 1011 sip.company.com charles(a)sip.company.com ------------------------------------------------------------------------------------------------- I dial to 1011 from another UAC and register on the same ser sip proxy. It works fine. But I dial to charles. It failed. Does anybody know what it happen and how to solve it? -- Best Regards Charles

4 6

[Serusers] jiri away from mail
by jiri kuthan 28 Apr '05

28 Apr '05

I'm out of office. If you have any urgent questions to iptelorg, call me or contact my colleague, Dr. Sisalem, sisalem(a)iptel.org. -Jiri

1 0

[Serusers] Call Accouting with rpm install
by wlo＠alphanet.net.au 28 Apr '05

28 Apr '05

I'm new to SER. It's easy enough to install ser-0.8.12-0.i386.rpm and ser-mysql-0.8.12-0.i386.rpm with Fedora Core 1 but just can't get the acc.so working after adding the following in ser.cfg modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") Apprecaite if anyone can tell me does acc.so work with mysql for the rpm install. Willie

3 3

[Serusers] handling failure after directing to application server
by Greg Martin 27 Apr '05

27 Apr '05

I'm trying to direct requests to registered users to another proxy which has an application server. Right now the proxy simply sends a 404 back. In that case I want to simply complete the call. What I am doing is looping until the ser has had enough. I've tried to set a flag to prevent it but the flag is in fact never set although the logs indicate it's the same transaction. Any comments? debug=3 fork=yes log_stderror=no dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" modparam("usrloc", "db_mode", 1) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; xlog("L_NOTICE", "Method <%rm> r-uri <%ru>\n"); # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method != "REGISTER") { record_route(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri != myself) { route(1); break; }; if (uri == myself) { if (method == "REGISTER") { route(2); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); }; } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ xlog("L_NOTICE", "route[1] *****\n"); t_on_reply("1"); if(isflagset(1)) { xlog("L_NOTICE", "RELAYING.\n"); resetflag(1); if (!t_relay()) { sl_reply_error(); break; }; }; t_on_failure("1"); t_relay_to_udp("app_servers_address", "5060"); } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ if (!save("location")) { sl_reply_error(); }; } onreply_route[1] { xlog("L_NOTICE", "Reply status %rs: Reason %rr\n"); } failure_route[1] { setflag(1); xlog("L_NOTICE", "FAILURE LOGIC.\n"); revert_uri(); append_branch(); t_relay(); } Greg Martin Technology & Operations TELUS Communication Inc. office: 780-493-2786 cell: 780-718-4139

2 1

Re: [Serusers] ACC into mysql
by Edgardo O. Gonzales II 27 Apr '05

27 Apr '05

Hi Again! Please help .. I really need it so badly .. thanks, ed Hi! my accounting is still not working though im not receiving any error message during my startup. Its nto logging my transaction on my db. Can you please check my ser.cfg file below .. Please put your comments .. thanks, ed ====================== debug=7 #fork=no #log_stderror=yes check_via=no dns=no rev_dns=no port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/ser/lib/ser/modules/mysql.so" loadmodule "/usr/local/ser/lib/ser/modules/sl.so" loadmodule "/usr/local/ser/lib/ser/modules/tm.so" loadmodule "/usr/local/ser/lib/ser/modules/rr.so" loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" loadmodule "/usr/local/ser/lib/ser/modules/auth.so" loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so" loadmodule "/usr/local/ser/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 3) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_flag", 2) modparam("acc", "failed_transactions", 1) # ------------------------- request routing logic ------------------- alias=test.com # main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; record_route(); if (loose_route()) { t_relay(); break; }; if (uri=~"test.com") { if (method=="REGISTER") { setflag(1); setflag(2); if (!www_authorize("test.com", "subscriber")) { www_challenge("test.com", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } ====================================== At 02:47 PM 4/26/2005, Barry Murphy wrote: >Mine works, just I dont get the BYE into mysql, even though I see it in ngrep. > >Secondly if i call my PBX (Asterisk) via ser and the asterisk hangs up >after giving the time, the call doesnt end on SER it remains connected. > >Stupid stupid thing :( > >Barry > >----- Original Message ----- >From: <mailto:edgardo.g@pacific.net.ph>Edgardo O. Gonzales II >To: <mailto:kofi@radiocomplex.com>Kofi Obiri-Yeboah >Cc: <mailto:serusers@lists.iptel.org>serusers(a)lists.iptel.org >Sent: Tuesday, April 26, 2005 6:29 PM >Subject: RE: [Serusers] ACC into mysql > >Thanks again for your help .. Here's my running ser.cfg >Hope you can help me make my accounting work.. >thanks, >ed >================================================================ ># ----------- global configuration parameters ------------------------ >#debug=3 >#fork=yes >#log_stderror=no >#debug=7 >#fork=no >#log_stderror=yes >check_via=no >dns=no >rev_dns=no >#port=5060 >#children=4 >fifo="/tmp/ser_fifo" ># ------------------ module loading ---------------------------------- >loadmodule "/usr/local/ser/lib/ser/modules/mysql.so" >loadmodule "/usr/local/ser/lib/ser/modules/sl.so" >loadmodule "/usr/local/ser/lib/ser/modules/tm.so" >loadmodule "/usr/local/ser/lib/ser/modules/rr.so" >loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" >loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" >loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" >loadmodule "/usr/local/ser/lib/ser/modules/auth.so" >loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so" >loadmodule "/usr/local/ser/lib/ser/modules/acc.so" ># ----------------- setting module-specific parameters --------------- ># -- usrloc params -- >modparam("usrloc", "db_mode", 1) >modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser") ># -- auth params -- >modparam("auth_db", "calculate_ha1", yes) >modparam("auth_db", "password_column", "password") ># -- rr params -- >modparam("rr", "enable_full_lr", 1) ># -- acc params -- >modparam("acc", "log_level", 1) >modparam("acc", "log_flag", 1) >modparam("acc", "log_missed_flag", 3) ># ------------------------- request routing logic ------------------- >alias=abc.com.ph ># main routing logic >route{ > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > record_route(); > if (loose_route()) { > t_relay(); > break; > }; > if (uri=~"abc.com.ph") { > if (method=="REGISTER") { > if (!www_authorize("abc.com.ph", "subscriber")) { > www_challenge("abc.com.ph", "0"); > break; > }; > save("location"); > break; > }; > lookup("aliases"); > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > if (!t_relay()) { > sl_reply_error(); > }; >} > > > >================================================================ >At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote: >>I am assuming your question is if the record_route() function is a >>parameter for accounting? If that was your question then the answer is >>no. Generally you invoke record_route() to ensure acl acceptance on a >>gateway (i.e. all calls through that gateway) >>-----Original Message----- >>From: Edgardo O. Gonzales II [ mailto:edgardo.g@pacific.net.ph] >>Sent: Monday, April 25, 2005 6:22 PM >>To: Kofi Obiri-Yeboah >>Cc: serusers(a)lists.iptel.org >>Subject: RE: [Serusers] ACC into mysql >> >>Hi Kofi! >>got it.. thanks for immediate feedback .. however my accounting is not >>working. >>any parameters to be added to make it work.. >>I have the following info already on my ser.cfg >>modparam("acc", "log_level", 1) >>modparam("acc", "log_flag", 1) >>modparam("acc", "log_missed_flag", 3) >>record_route(); -> its this a parameter for accounting >>thanks, >>ed >>At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote: >>>I think the correct modparam statement should read as follows: >>>modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") >>> >>>please note that "my" is required in front of sql >>> >>>and not: >>>modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >>> >>>-----Original Message----- >>>From: serusers-bounces(a)iptel.org [ mailto:serusers-bounces@lists.iptel.org]On >>>Behalf Of Edgardo O. Gonzales II >>>Sent: Monday, April 25, 2005 5:20 PM >>>To: serusers(a)lists.iptel.org >>>Subject: Re: [Serusers] ACC into mysql >>> >>>Hi all! >>>Im also receiving this error message. >>>Can somebody help us on how to make accounting work using mysql. >>>thanks, >>>ed >>>At 06:01 AM 4/26/2005, Leon Sun wrote: >>>>Hi, >>>>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql >>>>followed instruction from manual. I found, first, modparam("acc", >>>>"db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in >>>>ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad >>>>config file (1 errors) >>>>If I disabled it, SER worked fine but I couldnt see any record in acc >>>>table. >>>>Would anyone suggest how to put call records into Mysql? >>>>Thank you. >>>># ----------- global configuration parameters ------------------------ >>>>#debug=3 # debug level (cmd line: -dddddddddd) >>>>#fork=yes >>>>#log_stderror=no # (cmd line: -E) >>>>/* Uncomment these lines to enter debugging mode >>>>debug=7 >>>>fork=no >>>>log_stderror=yes >>>>*/ >>>>check_via=no # (cmd. line: -v) >>>>dns=no # (cmd. line: -r) >>>>rev_dns=no # (cmd. line: -R) >>>>#port=5060 >>>>#children=4 >>>>fifo="/tmp/ser_fifo" >>>># ------------------ module loading ---------------------------------- >>>># Uncomment this if you want to use SQL database >>>>loadmodule "/usr/lib/ser/modules/mysql.so" >>>>loadmodule "/usr/lib/ser/modules/acc.so" >>>>loadmodule "/usr/lib/ser/modules/sl.so" >>>>loadmodule "/usr/lib/ser/modules/tm.so" >>>>loadmodule "/usr/lib/ser/modules/rr.so" >>>>loadmodule "/usr/lib/ser/modules/maxfwd.so" >>>>loadmodule "/usr/lib/ser/modules/usrloc.so" >>>>loadmodule "/usr/lib/ser/modules/registrar.so" >>>># Uncomment this if you want digest authentication >>>># mysql.so must be loaded ! >>>>loadmodule "/usr/lib/ser/modules/auth.so" >>>>loadmodule "/usr/lib/ser/modules/auth_db.so" >>>># ----------------- setting module-specific parameters --------------- >>>>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >>>># -- usrloc params -- >>>>#modparam("usrloc", "db_mode", 0) >>>># Uncomment this if you want to use SQL database >>>># for persistent storage and comment the previous line >>>>modparam("usrloc", "db_mode", 2) >>>># -- auth params -- >>>># Uncomment if you are using auth module >>>># >>>>modparam("auth_db", "calculate_ha1", yes) >>>># >>>># If you set "calculate_ha1" parameter to yes (which true in this config), >>>># uncomment also the following parameter) >>>># >>>>modparam("auth_db", "password_column", "password") >>>># -- rr params -- >>>># add value to ;lr param to make some broken UAs happy >>>>modparam("rr", "enable_full_lr", 1) >>>>modparam("acc","log_level",1) >>>>modparam("acc","log_flag",1) >>>># ------------------------- request routing logic ------------------- >>>># main routing logic >>>>route{ >>>> # initial sanity checks -- messages with >>>> # max_forwards==0, or excessively long requests >>>> if (!mf_process_maxfwd_header("10")) { >>>> sl_send_reply("483","Too Many Hops"); >>>> break; >>>> }; >>>> if ( msg:len > max_len ) { >>>> sl_send_reply("513", "Message too big"); >>>> break; >>>> }; >>>> # we record-route all messages -- to make sure that >>>> # subsequent messages will go through our proxy; that's >>>> # particularly good if upstream and downstream entities >>>> # use different transport protocol >>>> record_route(); >>>> # loose-route processing >>>> if (loose_route()) { >>>> if (method=="BYE") { >>>> setflag(1); >>>> setflag(2); >>>> } >>>> t_relay(); >>>> break; >>>> }; >>>> #labeled all transaction for accounting >>>> setflag(1); >>>> setflag(2); >>>> if (method=="CANCEL"){ >>>> t_relay(); >>>> }; >>>> # (in case, it does not work, use the following command >>>> # with proper names and addresses in it) >>>> if (uri==myself) { >>>> # This for PSTN destination >>>> if (uri=~"^sip:1") >>>> { rewritehost("10.10.10.10"); >>>> forward(10.10.10.10,5060); >>>> break; >>>> } >>>> if (method=="REGISTER") { >>>> # Uncomment this if you want to use digest authentication >>>> if (!www_authorize("sip.mycommunications.com", >>>> "subscriber")) { >>>> >>>>www_challenge("sip.mycommunications.com", "0"); >>>> break; >>>> }; >>>> save("location"); >>>> break; >>>> }; >>>> # native SIP destinations are handled using our USRLOC DB >>>> if (!lookup("location")) { >>>> sl_send_reply("404", "Not Found"); >>>> break; >>>> }; >>>> }; >>>> # forward to current uri now; use stateful forwarding; that >>>> # works reliably even if we forward from TCP to UDP >>>> if (!t_relay()) { >>>> sl_reply_error(); >>>> }; >>>>} >>>>_______________________________________________ >>>>Serusers mailing list >>>>serusers(a)lists.iptel.org >>>>http://lists.iptel.org/mailman/listinfo/serusers > >---------- >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers

2 1

RE: [Serusers] ACC into mysql
by Edgardo O. Gonzales II 27 Apr '05

27 Apr '05

Hi Kofi! got it.. thanks for immediate feedback .. however my accounting is not working. any parameters to be added to make it work.. I have the following info already on my ser.cfg modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 3) record_route(); -> its this a parameter for accounting thanks, ed At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote: >I think the correct modparam statement should read as follows: >modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") > >please note that "my" is required in front of sql > >and not: >modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") > >-----Original Message----- >From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On >Behalf Of Edgardo O. Gonzales II >Sent: Monday, April 25, 2005 5:20 PM >To: serusers(a)lists.iptel.org >Subject: Re: [Serusers] ACC into mysql > > >Hi all! > >Im also receiving this error message. > >Can somebody help us on how to make accounting work using mysql. > >thanks, >ed > >At 06:01 AM 4/26/2005, Leon Sun wrote: >>Hi, >>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql >>followed instruction from manual. I found, first, modparam("acc", >>"db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in >>ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad >>config file (1 errors) >> >>If I disabled it, SER worked fine but I couldnt see any record in acc table. >> >>Would anyone suggest how to put call records into Mysql? >> >>Thank you. >> >> >> >># ----------- global configuration parameters ------------------------ >> >>#debug=3 # debug level (cmd line: -dddddddddd) >>#fork=yes >>#log_stderror=no # (cmd line: -E) >> >>/* Uncomment these lines to enter debugging mode >>debug=7 >>fork=no >>log_stderror=yes >>*/ >> >>check_via=no # (cmd. line: -v) >>dns=no # (cmd. line: -r) >>rev_dns=no # (cmd. line: -R) >>#port=5060 >>#children=4 >>fifo="/tmp/ser_fifo" >> >># ------------------ module loading ---------------------------------- >> >># Uncomment this if you want to use SQL database >>loadmodule "/usr/lib/ser/modules/mysql.so" >> >>loadmodule "/usr/lib/ser/modules/acc.so" >>loadmodule "/usr/lib/ser/modules/sl.so" >>loadmodule "/usr/lib/ser/modules/tm.so" >>loadmodule "/usr/lib/ser/modules/rr.so" >>loadmodule "/usr/lib/ser/modules/maxfwd.so" >>loadmodule "/usr/lib/ser/modules/usrloc.so" >>loadmodule "/usr/lib/ser/modules/registrar.so" >> >># Uncomment this if you want digest authentication >># mysql.so must be loaded ! >>loadmodule "/usr/lib/ser/modules/auth.so" >>loadmodule "/usr/lib/ser/modules/auth_db.so" >> >># ----------------- setting module-specific parameters --------------- >> >>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") >> >># -- usrloc params -- >> >>#modparam("usrloc", "db_mode", 0) >> >># Uncomment this if you want to use SQL database >># for persistent storage and comment the previous line >>modparam("usrloc", "db_mode", 2) >> >># -- auth params -- >># Uncomment if you are using auth module >># >>modparam("auth_db", "calculate_ha1", yes) >># >># If you set "calculate_ha1" parameter to yes (which true in this config), >># uncomment also the following parameter) >># >>modparam("auth_db", "password_column", "password") >> >># -- rr params -- >># add value to ;lr param to make some broken UAs happy >>modparam("rr", "enable_full_lr", 1) >> >> >>modparam("acc","log_level",1) >>modparam("acc","log_flag",1) >># ------------------------- request routing logic ------------------- >> >># main routing logic >> >>route{ >> >> # initial sanity checks -- messages with >> # max_forwards==0, or excessively long requests >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483","Too Many Hops"); >> break; >> }; >> if ( msg:len > max_len ) { >> sl_send_reply("513", "Message too big"); >> break; >> }; >> >> # we record-route all messages -- to make sure that >> # subsequent messages will go through our proxy; that's >> # particularly good if upstream and downstream entities >> # use different transport protocol >> record_route(); >> # loose-route processing >> if (loose_route()) { >> if (method=="BYE") { >> setflag(1); >> setflag(2); >> } >> >> t_relay(); >> >> break; >> }; >> >> #labeled all transaction for accounting >> setflag(1); >> setflag(2); >> >> if (method=="CANCEL"){ >> t_relay(); >> }; >> >> # (in case, it does not work, use the following command >> # with proper names and addresses in it) >> >> >> if (uri==myself) { >> >> # This for PSTN destination >> >> if (uri=~"^sip:1") >> >> { rewritehost("10.10.10.10"); >> forward(10.10.10.10,5060); >> break; >> } >> if (method=="REGISTER") { >> >> # Uncomment this if you want to use digest authentication >> if (!www_authorize("sip.mycommunications.com", >> "subscriber")) { >> >>www_challenge("sip.mycommunications.com", "0"); >> break; >> }; >> >> save("location"); >> break; >> }; >> >> # native SIP destinations are handled using our USRLOC DB >> if (!lookup("location")) { >> sl_send_reply("404", "Not Found"); >> break; >> }; >> }; >> # forward to current uri now; use stateful forwarding; that >> # works reliably even if we forward from TCP to UDP >> if (!t_relay()) { >> sl_reply_error(); >> }; >> >>} >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers

4 10

Re: [Serusers] Web Front End to SER
by Dave 27 Apr '05

27 Apr '05

Thanks. But are you refering to writing a module (modparam?)? I do not want to write a module. All I want is the my web application be able to configure ser and provision users. So in the case I would have two choices - user FIFO for ser management and direct database access for database manipulation. Right? --- Iqbal <iqbal(a)gigo.co.uk> wrote: > > Hi > > I think fifo writes to in memory DB which is read > for things like aliases > etc, hence if you are changing them then use fifo. > > As for DB schema changing I think from the modparam > lines you can change > your table names etc for lookups on anything, > (almost) which means that > you can build you own DB structure, and then when a > new version comes > up, just compare the mysql.sh script used to see > what new tables,columns > were added. > > Iqbal > > On 4/27/2005, "Dave" <ddx66(a)yahoo.com> wrote: > > >I am thinking of implementing a web frontend to ser > >(similar to serweb) for internal use and would > >appreciate some feedback regarding: > >1) Is using the FIFO the best or the only way to > >manage SER? > >2) From what I see, I'd need to access the database > >directly for me to be able to add users, assign > groups > >or even being able to insert AVP's. But this would > >imply modifying my code each time the database > schema > >were to change in the future. Is there any better > way > >to handle this? > > > >Thanks in advance. > > > >__________________________________________________ > >Do You Yahoo!? > >Tired of spam? Yahoo! Mail has the best spam > protection around > >http://mail.yahoo.com > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

RE: [Serusers] route based on src IP address?
by info＠beeplove.com 27 Apr '05

27 Apr '05

if (src_ip == 192.168.0.0/24) { rewritehostport("gw1.gateway.com:5060"); } else { rewritehostport("gw2.gateway.com:5060"); } Hope this will help. Thanks, Mohammad Original Message: ----------------- From: Juan Priotti jpriotti(a)gmail.com Date: Wed, 27 Apr 2005 17:29:10 -0300 To: serusers(a)iptel.org Subject: [Serusers] route based on src IP address? I have a simple question: Is it possible to route a sip call based on source IP address? For example, if a call if originated from UA1 I would need the call to be routed to gateway1 but if the call was originated on UA2, gateway2 should be used (UA1 has different IP address than UA2). If possible, which is the config I need to use in ser.cfg? Thanks in advance Juan _______________________________________________ Serusers mailing list Serusers(a)iptel.org http://mail.iptel.org/mailman/listinfo/serusers -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

[Serusers] Firmware question
by info＠beeplove.com 27 Apr '05

27 Apr '05

I have a question but its not related to SER. Its about Firmware of Hardphones. I would like learn more about the firmware. What language they use? Any documenation on it. Any information about writing firmware for SIP hardphone, would be greatly apprciated. Mohammad Khan -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

2 1

RE: [Serusers] Loopback Removal
by Ricardo Martinez 27 Apr '05

27 Apr '05

If i'm not wrong you can define your "listen address" in your configuration file (ser.cfg) # ----------- global configuration parameters ------------------------ # debug=0 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes listen=10.0.161.52 .... That maybe do the trick.... Regards, Ricardo Martinez.- > -----Mensaje original----- > De: Nucleo Wireless LSI [mailto:ntsf_lsi@yahoo.com.br] > Enviado el: Miércoles, 27 de Abril de 2005 15:24 > Para: serusers(a)lists.iptel.org > Asunto: [Serusers] Loopback Removal > > > Hi, > my SER displays the folowing message: > > Listening on > udp: 127.0.0.1 [127.0.0.1]:5060 > udp: 10.0.161.52 [10.0.161.52]:5060 > tcp: 127.0.0.1 [127.0.0.1]:5060 > tcp: 10.0.161.52 [10.0.161.52]:5060 > Aliases: > tcp: parati.intranet:5060 > tcp: localhost:5060 > tcp: parati:5060 > tcp: localhost.localdomain:5060 > udp: parati.intranet:5060 > udp: localhost:5060 > udp: parati:5060 > udp: localhost.localdomain:5060 > I'm afraid that by listening to the loopback address > (127.0.0.1) ser is preventing other computer to > connect (I can't register and connect using Kphone). > Does anyone knows how to remove the loopback address > from the listening table? > > Tank you!!!! > > > > > > > Yahoo! Acesso Grátis - Internet rápida e grátis. > Instale o discador agora! http://br.acesso.yahoo.com/ > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] Loopback Removal
by Nucleo Wireless LSI 27 Apr '05

27 Apr '05

Hi, my SER displays the folowing message: Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 10.0.161.52 [10.0.161.52]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 10.0.161.52 [10.0.161.52]:5060 Aliases: tcp: parati.intranet:5060 tcp: localhost:5060 tcp: parati:5060 tcp: localhost.localdomain:5060 udp: parati.intranet:5060 udp: localhost:5060 udp: parati:5060 udp: localhost.localdomain:5060 I'm afraid that by listening to the loopback address (127.0.0.1) ser is preventing other computer to connect (I can't register and connect using Kphone). Does anyone knows how to remove the loopback address from the listening table? Tank you!!!! Yahoo! Acesso Grátis - Internet rápida e grátis. Instale o discador agora! http://br.acesso.yahoo.com/

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users