- sr-users - kamailio.org

Re: [OpenSER-Users] Calls disconnect automatically
by VoIP Forums www.Go4Calls.com 21 Jan '08

21 Jan '08

Hi sorry, I forget to give my openser.cfg, there is one more point if i am using STUN server in our linksys device the call goes normal for long time till user finish the call. It seems something wrong in NAT configuration. # # sample config file to be used with nathelper/rtpproxy # # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=212.XXX.XXX.XXX:5064 #port=5064 children=4 disable_dns_blacklist = yes # --- module loading mpath="/usr/local/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 2) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("usrloc|auth_db","db_url","mysql://proxy:MoHaKa21@192.168.1.50/emafone") # -- usrloc params -- modparam("usrloc", "nat_bflag", 6) # -- registrar params -- modparam("registrar|nathelper", "received_avp", "$avp(i:42)") # -- auth params -- # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper modparam("nathelper", "natping_interval", 0) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "rtpproxy_disable", 0) modparam("nathelper", "rtpproxy_disable_tout", 60) modparam("nathelper", "rtpproxy_tout", 1) modparam("nathelper", "rtpproxy_retr", 5) modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "received_avp", "$avp(i:801)") #modparam("nathelper", "rtpproxy_sock", "udp:212.100.235.229:22222") #modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") #modparam("nathelper", "natping_interval", 30) #modparam("nathelper", "ping_nated_only", 1) #modparam("nathelper", "sipping_bflag", 7) #modparam("nathelper", "sipping_from", "sip:pinger@openser.org") # --- main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # NAT detection route(2); if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { #append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("212.XXX.XXX.XXX", "subscriber")) { www_challenge("212.XXX.XXX.XXX", "0"); exit; }; if (isflagset(5)) { setbflag(6); # if you want OPTIONS natpings uncomment next # setbflag(7); }; save("location"); exit; }; #########PSTTN CALL ############################################# if (uri=~"sip:00[1-9][0-9]+@.*") { strip(2); rewritehostport("212.XXX.XXX.XXX:5060"); route(1); exit; }; ################################################################### if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(6); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } failure_route[1] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } Regards, www.Go4Calls.Com VoIP Forums From: go4calls(a)hotmail.com To: users(a)lists.openser.org; users(a)openser.org Subject: Calls disconnect automatically Date: Sun, 20 Jan 2008 18:01:48 +0800 Hi Friends, I start getting one problem, the calls disconnect automatically in 30 and 32 sec. I am using openser + rtpproxy before with the same openser.cfg it was running smoothly and once traffic increased this problem appeared. Could you please help me to solve this issue because i put openser in production and now no one can make long call. Regards, www.Go4Calls.Com VoIP Forums Express yourself instantly with MSN Messenger! MSN Messenger _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

5 9

[OpenSER-Users] hor to register ?
by Aaash shah 21 Jan '08

21 Jan '08

hi i am making project on SIP handoffs i already install openSER on fedora i dont know how to register it so please give me reply thanks -- "Never Ignore Anyone Who Cares 4 u, Becoz one day u will Realize that u have lots a diamond while u were buzy in collecting stones...."

1 0

[Serusers] lookup_contacts for natted clients returns local ip
by Tomasz Zieleniewski 21 Jan '08

21 Jan '08

Hi, I have the followning natted contact in my location table: mysql> select * from location where uid ='tw(a)sip.touk.pl'; +--------------------+-------+-----------------------------------------------------------+ | contact | flags | received | +--------------------+-------+-----------------------------------------------------------+ | sip:tw@192.168.7.2 | 1 | sip:80.53.110.142:61066;dstip=192.168.129.74;dstport=5060 | +--------------------+-------+-----------------------------------------------------------+ when I invoke lookup_contacts the ruri has local address 192.168.7.2instead of public one. Is this correct behaviour? Please point me is this should work as I think. Thank You for any help Tomasz

2 3

[OpenSER-Users] Obtaining the domain of "Refer-to" URI
by Iñaki Baz Castillo 21 Jan '08

21 Jan '08

Hi, in order to match the domain of "Refer-to" header I must do a dirty string substitution: $avp(s:rt) = $rt; avp_subst("$avp(s:rt)", "/(.*(a)|[;?].*)//gi"); If for example: Refer-To: <sip:bob@biloxi.example.net?Accept-Contact=sip:bobsdesk. biloxi.example.net&Call-ID%3D55432%40alicepc.atlanta.example.com> Then $avp(s:rt) is "biloxi.example.net". Couldn't be possible to have generic string transformations to get part of a URI in any header/variable? Is there any other way I don't know to get it easily? Thanks. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

6 14

[OpenSER-Users] [OT] Annoying empty lines when using "M4 Macro Processor"
by Iñaki Baz Castillo 20 Jan '08

20 Jan '08

Hi, as suggested here: http://www.openser.org/docs/scripting I'm using M4 to declare "define" in my OpenSer script. I've an annoying issue since M4 adds some empty lines at the top of the script. If my script has any error, the logs will show me "ERROR in line 235 in openser.cfg" but that line correspondes to line 187 in my openser.cfg.m4 file, so makes it very difficult to debug. I've read the entire doc and have no idea of how to fix it. For example, consider this simple case: ---- local.m4 ---- define(`IP',`127.0.0.1') define(`PORT' ,`5061') ----------------------- ---- file.txt.m4 ---- My ip is IP and my port is PORT. -------------------------- ~# m4 local.m4 file.txt.m4 > file.txt ---- file.txt ---- <-- Empty line <-- Empty line <-- Empty line <-- Empty line My ip is 127.0.0.1 and my port is 5061. --------------------- Does someone know how to solve it? Thanks a lot. -- Iñaki Baz Castillo

2 5

[OpenSER-Users] mysql error shuts down openser 1.3
by Christian Schlatter 20 Jan '08

20 Jan '08

Hi all, Is it normal that a simple mysql error causes the worker process to die which in turn shuts down all other openser processes? If I remember correctly, this never happened to me with the 1.2 version. The following log comes from an 1.3 installation: [30812]: ERROR:mysql:db_mysql_submit_query: driver error: Can't lock file (errno: 4009) [30812]: ERROR:mysql:db_mysql_raw_query: error while submitting query [30812]: ERROR:usrloc:get_all_db_ucontacts: raw_query failed [30792]: INFO:core:handle_sigs: child process 30812 exited by a signal 11 [30792]: INFO:core:handle_sigs: core was not generated [30792]: INFO:core:handle_sigs: terminating due to SIGCHLD [30797]: INFO:core:sig_usr: signal 15 received [30814]: INFO:core:sig_usr: signal 15 received [30798]: INFO:core:sig_usr: signal 15 received [30800]: INFO:core:sig_usr: signal 15 received [30802]: INFO:core:sig_usr: signal 15 received [30804]: INFO:core:sig_usr: signal 15 received [30806]: INFO:core:sig_usr: signal 15 received [30808]: INFO:core:sig_usr: signal 15 received Jan 14 12:54:45 proxy-2 ser[30810]: INFO:core:sig_usr: signal 15 received /Christian

3 5

[OpenSER-Users] [OT] Nortel gateway allows "tel:1234@host" but not "tel:1234" ¿?¿?¿
by Iñaki Baz Castillo 20 Jan '08

20 Jan '08

Hi, I'm trying "P-Asserted-Identity" header against a Nortel CS2000_NGSS/8.0. It works (the number in PAI header is shown as PSTN callerid number) in those cases: P-Asserted-Identity: <sip:+34666555444@host/IP> P-Asserted-Identity: <tel:+34666555444@host/IP> As you can see, the second case is wrong since a "tel" uri has no host part according to RFC 3966 [1]. And the worst thing is that Nortel disallows or doesn't understand a correctly formed "tel" uri in PAI header as this: P-Asserted-Identity: <tel:+34666555444> My experience with gateways is very limited and new, but I should assume that it is a sad bug in the Nortel SIP stack, is it? Thanks for any help. [1] RFC 3966: http://www.faqs.org/rfcs/rfc3966.html -- Iñaki Baz Castillo

1 1

[Serusers] opensource prepaid system
by Nhadie 19 Jan '08

19 Jan '08

Hi, Has anyone tested an opensource prepaid system to work on a ser/freeradius/asterisk-b2bua/asterisk setup? TIA Regards, Nhadie

1 0

[OpenSER-Users] unixodbc (ARRGH!)
by Douglas Garstang 19 Jan '08

19 Jan '08

Can someone tell me what the correct syntax is for the avp_url command? I've been at this for hours and it's driving me CRAZY! this: modparam("avpops","avp_url","unixodbc://user:password@127.0.0.1/database") gives: unixodbc:extract_error: unixodbc:SQLDriverConnect=IM002:1:0:[unixODBC][Driver Manager]Data source name not found, and no default driver specified this: modparam("avpops","avp_url","unixodbc://dsn" ) gives: core:new_db_id: error while parsing database URL: unixodbc://dsn and I've tried about a HUNDRED other combinations. Doug. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[OpenSER-Users] Problems with NAPTR records and failover
by Robert McGilvray 19 Jan '08

19 Jan '08

Greetings list, I'm trying to setup uri rewriting and failover using NAPTR records. I've gone wrong somewhere since instead of trying the first uri and only failing over if there's a transactional and/or communications problem it's creating two branches and doing parallel forking on the records. Example: >From my test SIP phone I dial 3759. Openser receives this INVITE and does a private ENUM lookup on it which returns two NAPTR records: 9.5.7.3 NAPTR 10 10 "u" "E2U+sip" "!^.*$!sip:3759@mygateway1.whoever.com!" . NAPTR 20 10 "u" "E2U+sip" "!^.*$!sip:7100@myfailovergateway1.whoever.com!" . >From what I understand this should first try to contact my gateway (a cisco box) using a uri of sip:3759@mygateway1.whoever.com. If this fails it should then take the second higher order and rewrite the URI to sip:7100@myfailovergateway1.whoever.com. Instead what I end up with is two parallel calls to gateway and failover, the second NAPTR record is a conference bridge so the cisco immediately sends back a 200 OK and openser cancels the first branch. First gateway barely gets off a ring to my phone. I haven't adjusted any of the SIP timers so the defaults should allow plenty of time for call setup etc. Debug output from the call is in http://www.idled.net/~bobm/openser-debug.txt . Am I handling the INVITE incorrectly in my config? Any assistance would be appreciated. route[1] { if (!t_relay()) { xlog("L_NOTICE", "sipprx-wpf1.globeop.com: $mi route[$rm][0] $fu -> $ru -> Error with t_relay\n"); sl_reply_error(); } exit; } INVITE routing block route[6] { sl_send_reply("100", "Trying"); if (isflagset(1)) { xlog("L_NOTICE", "sipprx-wpf1.globeop.com: $mi route[$rm][0] $fu -> $ru Processing INVITE\n"); } if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } consume_credentials(); if ((uri =~ "sip:[0-9]{4}@.*") || (uri =~ "sip:[0-9]{10}@.*")) { prefix ("+"); if (enum_query("e164.globeop.com")) { xlog("L_INFO", "sipprx-wpf1.globeop.com: Number found in ENUM, new uri is $ru\n"); } else { xlog("L_INFO", "sipprx-wpf1.globeop.com: Number not found in ENUM\n"); revert_uri(); } } if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(1); } else if (lookup("location")) { append_hf("P-hint: usrloc applied\r\n"); route(1); } else { sl_send_reply("404","Not found"); exit; } exit; } -- Bob This email with all information contained herein or attached hereto may contain confidential and/or privileged information intended for the addressee(s) only. If you have received this email in error, please contact the sender and immediatley delete this email in its entirety and any attachments thereto.

1 1

[OpenSER-Users] Sippy b2bua
by TCB 18 Jan '08

18 Jan '08

Anyone managed to setup sippy b2bua . Pointers most welcome. I have tried setting it up and this is as far as i have gone. I have done the necessary radius config in my /etc/radiusclient-ng/{ radiusclient.conf,servers}. When i send a call from my proxy i get 403 (Auth Failed) Find attached the log file . regards -- TC

1 0

[OpenSER-Users] Sippy b2bua
by TCB 18 Jan '08

18 Jan '08

Anyone suceeded in implementing sippy b2bua. Pointers most welcome. -- TC

1 0

[OpenSER-Users] ERROR: presence_xml:get_final_notify_body?
by KevinKinnan 18 Jan '08

18 Jan '08

Did I miss something on configuration? or it simply does not send NOTIFY message when changes occur in the published data after integrating OpenXCAP? Thx in advance! Kevin _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] OpenSER: no NOTIFY when updating PUBLISH if integrating with OpenXCAP?
by KevinKinnan 18 Jan '08

18 Jan '08

Did I miss something on configuration? or it simply does not send NOTIFY message when changes occur in the published data after integrating OpenXCAP? Thx in advance! Kevin _________________________________________________________________ 手机也能上 MSN 聊天了，快来试试吧！ http://mobile.msn.com.cn/

1 0

[OpenSER-Users] OpenSER: Table "subscriber", only one new user can be added?
by KevinKinnan 18 Jan '08

18 Jan '08

Only one new entry can be added in the "subscriber" table. Or, "Duplicate entry '' for key 3" error responses. Is there any way to create more than one user in this table? Kevin, _________________________________________________________________ MSN圣诞礼物火热登场，免费发放中，快来领取吧！ http://im.live.cn/emoticons/?ID=18

6 6

[OpenSER-Users] OpenXCAP application support
by Richard Good 18 Jan '08

18 Jan '08

Hi, I am using the OpenXCAP implementation in co-ordination with OpenSER. Is there any way to support any (or at least a few more) applications than those currently supported by OpenXCAP? I previously used XCAP-Lite and stored various XML documents ranging from address books and TV guides to privacy and domain policies. I've found that with OpenXCAP if you use any application not supported ( anything besides resource-lists, pidf-manipulation, pres-rules, etc.) the Document Selector is not recognised and the documents can not be uploaded or downloaded. Is there a way to bypass this? Apologies if this is not the correct mailing list - the OpenXCAP page points to this list. Thanks and Regards, Richard

1 0

[OpenSER-Users] Help with this mediaproxy + Openser nat problem... thankssss
by Mario Bedialauneta 17 Jan '08

17 Jan '08

Hi everybody, I'm working with Openser + Mediaproxy 1.9.0 and it seems that everything is working when the calls are establised between users attached to the same proxy server, even with different kind of NATs. However It doen't work in 2 different scenarios, and the result is exactly the same , the video and audio is only sent in one way. Scenario 1 ======== User A attached to the SIP proxy xxx.xxx.xxx.13 (Public IP) calls to a GW xxx.xxx.xxx.11 (Public IP) with several users internally associated. In this case the user A can see the video and audio sent by the GW, but the GW doesn't receive any RTSP stream. It seems that the mediaproxy doesn't do anything, why? maybe because the GW blongs to other domain (xxx.xxx.xxx.11) ? What can I do? If the GW calls to user A, it works fine (I can see the session in the mediaproxy with sessions.py) Scenario 2 ======== In this case, I have another GW with Public IP address xxx.xxx.xxx.14, but it doesn't include in the INVITE message the SDP body. The GW calls to the same user attached to the SIP proxy xxx.xxx.xxx.13 , and the behaviour is exactly the same as scenario 1, the calling site can sse the video and audio but the called can't. Unlike the previous scenario, the signalling is: INVITE without SDP --> 200 OK (SDP) -- > ACK (SDP) In theory, Mediaproxy 1.9.0 should support this procedure since it's a SIP standard mechanism, however the called party doesn't receive RTP stream. In my opinion, the problem could be related to scenario 1, I mean , the calling party is not attached to the SIP proxy (belongs to other domain) and when the 200 OK (SDP) message arrives to the SIP proxy, the mediaproxy doesn't do anything Sorry for the complex explanation. I've waste a lot of time trying to solve this solution and honestly I don't know what to do. Please, could somebody help?? I attach my openser.conf. I hope it helps. Andreti debug=5 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL0 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes listen=xxx.xxx.10.12 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" # ------------------ module loading ---------------------------------- mpath = "/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "domain.so" loadmodule "mediaproxy.so" loadmodule "uri_db.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "avpops.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "nathelper.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "auth.so" loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 20) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 1) #cambio 16_04_07 modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") #puesto para el CDRTool modparam("acc", "failed_transaction_flag", 1) modparam("acc", "report_cancels", 0) modparam("acc", "report_ack", 0) modparam("acc", "early_media", 0) modparam("acc", "log_level", 1) #modparam("acc", "radius_config", "/etc/openser/radius/client.conf") modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp;\ Sip-RPid=$avp(s:rpid); \ Source-IP=$si; \ Source-Port=$sp; \ Canonical-URI=$avp($can_uri); \ Billing-Party=$avp($billing_party); \ Divert-Reason=$avp(s:divert_reason); \ X-RTP-Stat=$avp(s:rtp_statistics); \ From-Header=$hdr(from); \ User-Agent=$hdr(user-agent); \ Contact=$hdr(contact); \ Event=$hdr(event)") # SIP-Proxy-IP=$avp(s:sip_proxy_ip)") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- avpops params -- #modparam("avpops", "avp_aliases", "day=i:101;time=i:102") modparam("avpops","avp_aliases","can_uri=i:34") modparam("avpops","avp_aliases","billing_party=i:1") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "natping_interval", 60) modparam("registrar", "nat_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # setflag(ACCOUNTING_FLAG); # avp_write("SER_IP","$avp(s:sip-proxy)"); # avp_write("$ru", "$avp(can_uri)"); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); setflag(1); } route(1); }; if (src_ip==193.36.177.227) { fix_nated_sdp("2"); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (method=="MESSAGE") { setflag(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("sip.com", "subscriber")) { # www_challenge("sip.com", "0"); # exit; # }; if (!radius_www_authorize("")) { www_challenge("","1"); exit; } if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; }; if (method=="INVITE") { t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { end_media_session(); }; if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri==" sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; t_relay(); return; }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri==" sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; append_hf("P-hint: usrloc applied\r\n"); # route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; }

1 0

[OpenSER-Users] ERROR: presence_xml:get_final_notify_body?
by KevinKinnan 17 Jan '08

17 Jan '08

The debug log in 9 level is attached. K, _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

Re: [OpenSER-Users] openSER Call Route Logic
by Patrick Baker 17 Jan '08

17 Jan '08

Sipwise.com might help ----- Original Message ----- From: users-bounces(a)lists.openser.org <users-bounces(a)lists.openser.org> To: users(a)lists.openser.org <users(a)lists.openser.org> Sent: Wed Jan 16 23:48:27 2008 Subject: [OpenSER-Users] openSER Call Route Logic Hi, I recently installed openser-1.3.0 and able to connect my cisco sip phones and everything is working. Now i need to integrate this with asterisk box for call forwarding to other locations & voicemails. i read the getting started guide and other information, but seems i need more help from the group. can any one give me a helping hand. i am sure i will do my home work before bug you again. I need a starting point to over come the complexity of the routing plan and logic. thanks -asterisk user ________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. <http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/c…>

3 3

Re: [OpenSER-Users] MySQL Alternative (help!)
by Douglas Garstang 17 Jan '08

17 Jan '08

Henning, Let me try asking my question another way. Is it possible to use avp_db_query() with UnixODBC? If so, how? Douglas. ----- Original Message ---- From: Henning Westerholt <henning.westerholt(a)1und1.de> To: users(a)lists.openser.org Cc: Douglas Garstang <dougmig33(a)yahoo.com> Sent: Thursday, January 17, 2008 1:15:09 AM Subject: Re: [OpenSER-Users] MySQL Alternative On Thursday 17 January 2008, Douglas Garstang wrote: > What other options do I have for generic database connectivity besides > MySQL/avp_db_query() in OpenSER? > > Can I use SQLite? Can I use unixodbc? (and I'm not talking about the > limited built in usrloc unixodbc stuff) Hi Douglas, don't know what you mean with the builtin ODBC stuff in usrloc.. I assume that you talking about connectivity options for OpenSER. Available database modules that can be used with most modules: MySQL PostgreSQL UnixODBC (should work with Oracle, MS-SQL, SQLite and other) dbtext db_berkeley (Berkeley DB) Interfaces roughly sorted in terms of maturity, stability.. Most people uses MySQL, so this is the best tested option. Cheers, Henning ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[OpenSER-Users] Duplicated entries in "location" table when using "db_mode 3"
by Iñaki Baz Castillo 17 Jan '08

17 Jan '08

Hi, I use ("usrloc", "db_mode", 3) since some months and I've realized that many times I get duplicated entries in location table. Those entries have **exactly** the same values in all the columns. Note that is a testing serer which I restart 10 or 20 times each hour XD and that I've upgraded from 1.2 to 1.3 getting always this issue. If I send a new REGISTER (refresh) for an AoR with duplicated entries both entries are updated according to the new "expires" and CSEQ. Is it normal? -- Iñaki Baz Castillo

1 0

Re: [OpenSER-Users] best response seems wrong.
by Aymeric Moizard 17 Jan '08

17 Jan '08

(sorry: just repost to follow correct thread/subjet) I just found another example from rfc3261 where an endpoint will use 5xx class answer: 12.2.2 UAS Behavior Page 76: If the remote sequence number is empty, it MUST be set to the value of the sequence number in the CSeq header field value in the request. If the remote sequence number was not empty, but the sequence number of the request is lower than the remote sequence number, the request is out of order and MUST be rejected with a 500 (Server Internal Error) response. Hope I convinced you! tks, Aymeric MOIZARD / ANTISIP amsip - http://www.antisip.com osip2 - http://www.osip.org eXosip2 - http://savannah.nongnu.org/projects/exosip/ On Wed, 16 Jan 2008, Iñaki Baz Castillo wrote: > On Wednesday 16 January 2008 13:44:10 A.smith wrote: > >> If I try and use the whole example cfg (not just the route) I am recieving >> an error like: >> >> 0(23448) find_cmd_export_t: <lookup> not found >> 0(23448) parse error (105,23-24): unknown command, missing loadmodule? > > "lookup()" is defined in "registrar" module that you are not loading: > http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN342 > > -- > Iñaki Baz Castillo > ibc(a)in.ilimit.es > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users >

5 20

[OpenSER-Users] xlite with openser / hello world posts
by A.smith 17 Jan '08

17 Jan '08

1 0

[OpenSER-Users] Presence + XCAP issue
by Leonard Broman 17 Jan '08

17 Jan '08

Hi! I have an issue with the presence/xml/xcap modules. I'm trying to run the presence server without an "integrated" xcap server, since I have not managed to get openXCAP running on CentOS. However, for the moment I'd prefer not to be depending on it. I suppose this might be the root of my problem, as follows. Publish is working fine. But Subscribe is always answered with a 481 (which shouldn't occur normally) and I get this log: Jan 17 10:57:16 m2lin3 ./openser[7097]: ERROR:presence:get_stored_info: record not found in hash_table Jan 17 10:57:16 m2lin3 ./openser[7097]: ERROR:presence:handle_subscribe: getting stored info My primary question is wheather the this error is caused by the absence of documents in the xcap table? And if so can I do something to avoid this dependence? /Leo

1 0

[OpenSER-Users] openser 1.4 blocks
by Helmut Kuper 17 Jan '08

17 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, when I send the following SIP-Message on my openser, openser blocks and eats nearly all CPU power it can get: BYE sip:80.228.245.138:5070 SIP/2.0 Via: SIP/2.0/UDP 212.6.95.88:1028;branch=z9hG4bK-7rhl6qnns4ej;rport Route: <sip:212.6.123.118;lr=on;ftag=7w4sllx8cc> Route: <sip:212.6.123.118:5090;lr;ftag=7w4sllx8cc;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--> Route: <sip:Gk-int@80.228.245.176:5050;lr> From: "HK SoftSwitch" <sip:v101@sip0.en.ewetel.de>;tag=7w4sllx8cc To: <sip:12345@sip0.en.ewetel.de;user=phone>;tag=0082-00000054-0103i0 Call-ID: 3c26c9bec396-loo61fn1yu42 CSeq: 3 BYE Max-Forwards: 70 Contact: <sip:v101@212.6.95.88:1028;line=nopsgn9d>;flow-id=1 User-Agent: snom370/7.1.30 RTP-RxStat: Total_Rx_Pkts=120,Rx_Pkts=120,Rx_Pkts_Lost=0,Remote_Rx_Pkts_Lost=0 RTP-TxStat: Total_Tx_Pkts=2263,Tx_Pkts=2263,Remote_Tx_Pkts=160 Content-Length: 0 What openser does is authentication, avp db loading an then a simple t_relay(). opensers debuglog (level 8) is this: Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:check_via_address: params 212.6.95.88, 212.6.95.88, 0 Jan 16 21:30:45 [8406] DBG:sl:run_sl_callbacks: callback id 0 entered Jan 16 21:30:45 [8406] DBG:siptrace:trace_sl_onreply_out: trace off... Jan 16 21:30:45 [8406] DBG:core:destroy_avp_list: destroying list 0xb5b00e50 Jan 16 21:30:45 [8406] DBG:core:receive_msg: cleaning up Jan 16 21:30:45 [8406] DBG:core:parse_msg: SIP Request: Jan 16 21:30:45 [8406] DBG:core:parse_msg: method: <BYE> Jan 16 21:30:45 [8406] DBG:core:parse_msg: uri: <sip:80.228.245.138:5080> Jan 16 21:30:45 [8406] DBG:core:parse_msg: version: <SIP/2.0> Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=2 Jan 16 21:30:45 [8406] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-goxekiv4ggfm>; state=6 Jan 16 21:30:45 [8406] DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=17 Jan 16 21:30:45 [8406] DBG:core:parse_via: end of header reached, state=5 Jan 16 21:30:45 [8406] DBG:core:parse_headers: via found, flags=2 Jan 16 21:30:45 [8406] DBG:core:parse_headers: this is the first via Jan 16 21:30:45 [8406] DBG:core:receive_msg: After parse_msg... Jan 16 21:30:45 [8406] DBG:core:receive_msg: preparing to run routing scripts... BYE--------------------------------------------------------------------- [Wed Jan 16 21:30:45 2008] - NEW TRANSACTION! Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Jan 16 21:30:45 [8406] DBG:core:parse_to_param: tag=0082-0000004f-00e7i0 Jan 16 21:30:45 [8406] DBG:core:parse_to: end of header reached, state=29 Jan 16 21:30:45 [8406] DBG:core:parse_to: display={}, ruri={sip:044180002850@sip0.en.ewetel.de;user=phone} Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: <To> [74]; uri=[sip:044180002850@sip0.en.ewetel.de;user=phone] Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: to body [<sip:044180002850@sip0.en.ewetel.de;user=phone>] Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: cseq <CSeq>: <4> <BYE> Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: start searching: hash=36300, isACK=0 Jan 16 21:30:45 [8406] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: no transaction found Jan 16 21:30:45 [8406] DBG:core:parse_to_param: tag=bpl4kg8f57 Jan 16 21:30:45 [8406] DBG:core:parse_to: end of header reached, state=29 Jan 16 21:30:45 [8406] DBG:core:parse_to: display={"HK SoftSwitch"}, ruri={sip:v101@sip0.en.ewetel.de} MAIN : New Message <BYE> From: sip:v101@sip0.en.ewetel.de, To: sip:80.228.245.138:5080 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=100 Jan 16 21:30:45 [8406] DBG:maxfwd:is_maxfwd_present: value = 70 Route 22: Check type of source ... Jan 16 21:30:45 [8406] DBG:permissions:allow_source_address: looking for <1, 585f06d4, 1028> Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=800000000 Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: content_length=0 Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: found end of header Jan 16 21:30:45 [8406] DBG:core:pv_get_ppi_attr: no P-Preferred-Identity header Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 17==13 && [sip0.en.ewetel.de] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 17==13 && [sip0.en.ewetel.de] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:avpops:ops_dbquery_avps: query [SELECT uri_user FROM uri WHERE username='v101' AND domain='sip0.en.ewetel.de' LIMIT 1] Jan 16 21:30:45 [8406] DBG:avpops:db_query_avp: rows [1] Jan 16 21:30:45 [8406] DBG:avpops:db_query_avp: row [0] Jan 16 21:30:45 [8406] DBG:avpops:db_close_query: close avp query Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 1 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81dde58 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81dde58=pkg_free() RES_ROWS From-URI belongs to xxxxxxxxxxx Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:auth:check_nonce: comparing [478e6aa112f6919eb75ced3104f1774c59a1ce01] and [478e6aa112f6919eb75ced3104f1774c59a1ce01] Jan 16 21:30:45 [8406] DBG:auth_db:get_ha1: HA1 string calculated: 98eb7bda25d62322c1ff8261c216e8ad Jan 16 21:30:45 [8406] DBG:auth:check_response: our result = '43c9a3529f44aa0e6dda2f6f0894632c' Jan 16 21:30:45 [8406] DBG:auth:check_response: authorization is OK Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 1 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81dde88 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81dde88=pkg_free() RES_ROWS Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:comp_scriptvar: str 29 : xxxxxxxxx Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Route 04: <BYE>-Authentication OK Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Route 07: <BYE>: Loading A-Profile ... Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:db_close_query: close avp query Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 15 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81de068 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[1]=0x81de070 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[2]=0x81de078 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[3]=0x81de080 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[4]=0x81de088 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[5]=0x81de090 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[6]=0x81de098 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[7]=0x81de0a0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[8]=0x81de0a8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[9]=0x81de0b0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[10]=0x81de0b8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[11]=0x81de0c0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[12]=0x81de0c8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[13]=0x81de0d0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[14]=0x81de0d8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81de068=pkg_free() RES_ROWS Jan 16 21:30:45 [8406] DBG:avpops:ops_dbload_avps: loaded avps = 15 OK Jan 16 21:30:45 [8406] DBG:core:comp_scriptvar: int 20 : 1 / 1 MAIN : <BYE>: From-Data is: User='v101', Domain='sip0.en.ewetel.de', URI='sip:v101@sip0.en.ewetel.de' Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=200 Jan 16 21:30:45 [8406] DBG:rr:is_preloaded: is_preloaded: No Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:check_self: host != me Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 13==13 && [212.6.123.118] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:rr:after_loose: Topmost route URI: 'sip:212.6.123.118;lr=on;ftag=bpl4kg8f57' is me Jan 16 21:30:45 [8406] DBG:rr:after_loose: URI to be processed: 'sip:212.6.123.118:5090;lr;ftag=bpl4kg8f57;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--' Jan 16 21:30:45 [8406] DBG:rr:after_loose: Next URI is a loose router Jan 16 21:30:45 [8406] DBG:rr:run_rr_callbacks: callback id 0 entered with <lr=on;ftag=bpl4kg8f57> DEBUG:uac:restore_from: getting 'vsf' Route param DEBUG:uac:restore_from: Route param 'vsf' not found Jan 16 21:30:45 [8406] DBG:avpops:ops_check_avp: check <17> against <8> as int /256 Jan 16 21:30:45 [8406] DBG:avpops:ops_check_avp: no match Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=200 Jan 16 21:30:45 [8406] DBG:rr:is_preloaded: is_preloaded: No Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:check_self: host != me Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 13==13 && [212.6.123.118] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:rr:after_loose: Topmost route URI: 'sip:212.6.123.118;lr=on;ftag=bpl4kg8f57' is me Jan 16 21:30:45 [8406] DBG:rr:after_loose: URI to be processed: 'sip:212.6.123.118:5090;lr;ftag=bpl4kg8f57;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--' Jan 16 21:30:45 [8406] DBG:rr:after_loose: Next URI is a loose router Jan 16 21:30:45 [8406] DBG:rr:run_rr_callbacks: callback id 0 entered with <lr=on;ftag=bpl4kg8f57> DEBUG:uac:restore_from: getting 'vsf' Route param DEBUG:uac:restore_from: Route param 'vsf' not found MAIN : Loose-Route Jan 16 21:30:45 [8406] DBG:uri:has_totag: totag found Route 08: <BYE>: Set Accounting for this call! Route 11: Removing secret Headers Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:registrar:lookup: '80.228.245.138' Not found in usrloc Route 01: Relaying BYE: RURI=sip:80.228.245.138:5080 F=sip:v101@sip0.en.ewetel.de IP=212.6.95.88; Calltimeout=<null> [Wed Jan 16 21:30:45 2008] Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Route 01: Next Hop DST-Set Jan 16 21:30:45 [8406] DBG:tm:t_newtran: transaction on entrance=(nil) Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: start searching: hash=36300, isACK=0 Jan 16 21:30:45 [8406] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: no transaction found Jan 16 21:30:45 [8406] DBG:tm:run_reqin_callbacks: trans=0xb5b01048, callback type 1, id 1 entered Jan 16 21:30:45 [8406] DBG:siptrace:trace_onreq_in: trace off... Jan 16 21:30:45 [8406] DBG:tm:run_reqin_callbacks: trans=0xb5b01048, callback type 1, id 0 entered Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Any ideas, why it hangs eating all my cpu power ? regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHjmra4tZeNddg3dwRAvu4AJ4rK5jCbKF9UDGu8FP1suEyRHkwigCeM58p K5a16nleRI+zZujWTI0Ntfs= =XJqP -----END PGP SIGNATURE-----

2 3

[OpenSER-Users] Compilation Problem - please help me.
by Noble Antony T 17 Jan '08

17 Jan '08

Hi, I was trying to install Openser with RLS support, I got an error message, *In file included from notify.h:31, from hash.c:37: presentity.h:36:27: libxml/parser.h: No such file or directory make[1]: *** [hash.o] Error 1 make[1]: Leaving directory `/home/nthattil/openser-1.3.x/modules/presence' make: *** [modules] Error 2 * I had installed libxml2 already, * libxml2.so.2 libxml2.so.2.6.27* the above modules are present in folder /usr/lib/ I am using the machine, *Linux version 2.6.18 (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Jul 26 01:27:32 EDT 2007 * I edited the Makefile and updated the line as follows, *exclude_modules?= jabber cpl-c postgres osp unixodbc \ avp_radius auth_radius group_radius uri_radius xmpp \ presence_xml presence_mwi pua_bla pua_mi \ pua_usrloc pua_xmpp mi_xmlrpc perl snmpstats perlvdb \ ldap carrierroute h350 xcap_client db_berkeley seas * I gave command prompt$ *make all* for compiling. I am getting the error message as shown above. Please mail me if I am missing something.. -- Noble Antony Thattil, Bangalore.

3 2

[OpenSER-Users] openSER Call Route Logic
by asterisk User 17 Jan '08

17 Jan '08

Hi, I recently installed openser-1.3.0 and able to connect my cisco sip phones and everything is working. Now i need to integrate this with asterisk box for call forwarding to other locations & voicemails. i read the getting started guide and other information, but seems i need more help from the group. can any one give me a helping hand. i am sure i will do my home work before bug you again. I need a starting point to over come the complexity of the routing plan and logic. thanks -asterisk user --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

2 1

[OpenSER-Users] How to interacte X-lite and openser
by hammou moujane 17 Jan '08

17 Jan '08

Hello All, I have installed openser, is it possible to make voice call between two x-lite softphone using this SIP server? how can I start this operation if it's possible? Thankyou very much for your help. Regards -- Hammou MOUJANE Tel: +212 62 46 33 89 INPT

2 1

[OpenSER-Users] MySQL Alternative
by Douglas Garstang 17 Jan '08

17 Jan '08

What other options do I have for generic database connectivity besides MySQL/avp_db_query() in OpenSER? Can I use SQLite? Can I use unixodbc? (and I'm not talking about the limited built in usrloc unixodbc stuff) Thanks, Doug. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

Re: [OpenSER-Users] {Spam?} Hello World Config problem
by Andy Smith 16 Jan '08

16 Jan '08

Hi! Ok, thanks that problem solved and now I have another! I get the error "Registration error: 404 - Not Found" in Xlite. If I comment out this section of the cfg file I then get an error "Too Many Hops" :S :SMy laptop is directly (virtually on VPN) connected to the same LAN as the openser server.Any ideas? Or anyone have an already working hello world config??thanks in advance, Andy.On Wednesday 16 January 2008 15:51:58 Andy Smith wrote: > Thanks Iñaki, ok now my openser starts up ok, but I get the same "filtered > destination" Try adding: disable_dns_blacklist=yes at the top of your script.

1 0

[OpenSER-Users] Problems with unixodbc driver
by Alcindo Schleder 16 Jan '08

16 Jan '08

Hi.. I´m using unixodbc driver to connect with firebird SGDB. The problem is that the unixodbc driver not connect... ERROR:unixodbc:new_connection: failed to connect Jan 15 14:19:06 xsip openser[4577]: unixodbc:SQLDriverConnect=08004:1:-904:[unixODBC][ODBC Firebird Driver]Unable to connect to data source: library 'libfbclient.so' failed to load Jan 15 14:19:06 xsip openser[4577]: ERROR: group_db_bind: unable to connect to the database Jan 15 14:19:06 xsip openser[4577]: ERROR:group:mod_init: unable to open database connection

2 4

Re: [OpenSER-Users] {Spam?} Hello World Config problem
by Andy Smith 16 Jan '08

16 Jan '08

Thanks Iñaki, ok now my openser starts up ok, but I get the same "filtered destination" error from Xlite as I was getting with my original openser cfg with the hello world route. I was hoping the hello world config would allow me to connect/register whatever SIP device without any specific password :S thanks Andy.On Wednesday 16 January 2008 13:44:10 A.smith wrote: > If I try and use the whole example cfg (not just the route) I am recieving > an error like: > > 0(23448) find_cmd_export_t: <lookup> not found > 0(23448) parse error (105,23-24): unknown command, missing loadmodule? "lookup()" is defined in "registrar" module that you are not loading: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN342 -- Iñaki Baz Castillo ibc at in.ilimit.es

2 1

[OpenSER-Users] Hello World Config problem
by A.smith 16 Jan '08

16 Jan '08

HI, As I dont currently have a working PSTN I wanted to get the hello world config working so I can generate calls from one IP phone to another just across my LAN. However with the route config (put into my previous working registrar test cfg) from this example: http://openser.oralnet.co.uk/#AEN424 I am recieving a "filtered destination" error from XLite when it attempts to register. I can see the packets hitting my server from tcpdump... If I try and use the whole example cfg (not just the route) I am recieving an error like: 0(23448) find_cmd_export_t: <lookup> not found 0(23448) parse error (105,23-24): unknown command, missing loadmodule? Any help or tips on diagnosing this would be greatly appreciated! I am using OpenSER 1.2.2 on CentOS Linux... thanks Andy. ________________________________________________ Message sent using UK Grid Webmail 2.7.9

3 2

[OpenSER-Users] Openser + Wesip Click2dial
by [ACTIVENDY] NOC 16 Jan '08

16 Jan '08

Hi, I've installed my Openser with Wesip Application Server. I've installed Wesip with Click2dial application from Wesip web site. The application is running, but when I try to call to a softphone sip address trough my browser I get an error code -2. In Wesip logs I get the following: CommonsLoggingOutput [HttpProcessor[7080][4]] - Exec: Click2Call.c2cDWR() CommonsLoggingOutput [HttpProcessor[7080][4]] - --Object created, not stored. id=0 MapFactory [HttpProcessor[7080][4]] - Unable to create class java.util.Hashtable returning HashTable instead StandardSipSession [HttpProcessor[7080][4]] - Transport: udp SipRequest [HttpProcessor[7080][4]] - ERROR sending message javax.sip.TransactionUnavailableException: no route! at com.voztele.javax.sip.SipProviderImpl.getNewClientTransaction(SipProviderImpl.java:264) at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:196) at com.voztele.wesip.apps.click2call.C2C.c2c(C2C.java:134) at com.voztele.wesip.apps.click2call.C2C.c2cDWR(C2C.java:99) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.directwebremoting.impl.ExecuteAjaxFilter.doFilter(ExecuteAjaxFilter.java:34) at org.directwebremoting.impl.DefaultRemoter$1.doFilter(DefaultRemoter.java:428) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:431) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:283) at org.directwebremoting.servlet.PlainCallHandler.handle(PlainCallHandler.java:52) at org.directwebremoting.servlet.UrlProcessor.handle(UrlProcessor.java:101) at org.directwebremoting.servlet.DwrServlet.doPost(DwrServlet.java:146) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:206) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedContextValve.invokeHTTP(ConvergedContextValve.java:144) at com.voztele.sipservlet.valves.ConvergedContextValve.invoke(ConvergedContextValve.java:64) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.core.StandardHttpContext.invoke(StandardHttpContext.java:2377) at com.voztele.sipservlet.core.ConvergedContext.invoke(ConvergedContext.java:98) at com.voztele.sipservlet.valves.ConvergedHostValve.invokeHTTP(ConvergedHostValve.java:336) at com.voztele.sipservlet.valves.ConvergedHostValve.invoke(ConvergedHostValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:124) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedEngineValve.invoke(ConvergedEngineValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:994) at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1105) at java.lang.Thread.run(Thread.java:619) java.lang.RuntimeException: javax.sip.TransactionUnavailableException: no route! at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:222) at com.voztele.wesip.apps.click2call.C2C.c2c(C2C.java:134) at com.voztele.wesip.apps.click2call.C2C.c2cDWR(C2C.java:99) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.directwebremoting.impl.ExecuteAjaxFilter.doFilter(ExecuteAjaxFilter.java:34) at org.directwebremoting.impl.DefaultRemoter$1.doFilter(DefaultRemoter.java:428) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:431) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:283) at org.directwebremoting.servlet.PlainCallHandler.handle(PlainCallHandler.java:52) at org.directwebremoting.servlet.UrlProcessor.handle(UrlProcessor.java:101) at org.directwebremoting.servlet.DwrServlet.doPost(DwrServlet.java:146) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:206) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedContextValve.invokeHTTP(ConvergedContextValve.java:144) at com.voztele.sipservlet.valves.ConvergedContextValve.invoke(ConvergedContextValve.java:64) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.core.StandardHttpContext.invoke(StandardHttpContext.java:2377) at com.voztele.sipservlet.core.ConvergedContext.invoke(ConvergedContext.java:98) at com.voztele.sipservlet.valves.ConvergedHostValve.invokeHTTP(ConvergedHostValve.java:336) at com.voztele.sipservlet.valves.ConvergedHostValve.invoke(ConvergedHostValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:124) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedEngineValve.invoke(ConvergedEngineValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:994) at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1105) at java.lang.Thread.run(Thread.java:619) Caused by: javax.sip.TransactionUnavailableException: no route! at com.voztele.javax.sip.SipProviderImpl.getNewClientTransaction(SipProviderImpl.java:264) at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:196) ... 44 more My configuration is: - openser.cfg debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=MY_IP_ADDRESS mpath="/lib/openser/modules" loadmodule "mi_fifo.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "seas.so" modparam("mi_fifo","fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("seas", "listen_sockets", "MY_IP_ADDRESS:5080") route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if(!as_relay_t("wesip")){ t_reply("500","Application Server error"); } } - server.xml <Server port="5005" shutdown="SHUTDOWN" debug="0"> <Service name="WeSIP-Standalone"> <Connector className="org.apache.catalina.connector.http.HttpConnector" port="7080" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" /> <Connector className="com.voztele.sipservlet.connector.SipConnector" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" addresses="217.172.74.8:5060" pathName="com.voztele" protocol="udp" > <ExtraProperties> <Property key="com.voztele.javax.sip.SER_ADDRESS" value="MY_IP_ADDRESS" /> <Property key="com.voztele.javax.sip.SER_PORT" value="5080" /> <Property key="com.voztele.STATISTICS" value="false" /> <Property key="javax.sip.STACK_NAME" value="wesip" /> <Property key="javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.REENTRANT_LISTENER" value="true" /> <Property key="javax.sip.AUTOMATIC_DIALOG_SUPPORT" value="false" /> <Property key="com.voztele.javax.sip.TRACE_LEVEL" value="0" /> </ExtraProperties> </Connector> <Engine name="Standalone" defaultHost="217.172.74.8" debug="0" className="com.voztele.sipservlet.core.ConvergedEngine"> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.0"/> <Mapper className="com.voztele.sipservlet.core.EngineSipMapper" protocol="SIP/2.0"/> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Realm className="org.apache.catalina.realm.MemoryRealm" /> <Host name="MY_IP_ADDRESS" nameSip="MY_IP_ADDRESS_5060" debug="0" appBase="wesipapps" unpackWARs="true" autoDeploy="true" className="com.voztele.sipservlet.core.ConvergedHost">  <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Mapper className="com.voztele.sipservlet.core.SipHostMapper" protocol="SIP/2.0"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.0"/>  </Host> </Engine> </Service> </Server> Thanks in advance, Sergi

2 2

[OpenSER-Users] How to convert 183 to 180 message
by Tung Tran 16 Jan '08

16 Jan '08

3 3

[OpenSER-Users] OpenSER config Wiz - What does it do? :P
by A.smith 16 Jan '08

16 Jan '08

Hi, Slightly stupid question I know, what I mean is that the config contains no rewrite host so Im just wondering whether the configs that the wizard generate are actually useable for something without modification. I ask because I want to understand what the wizard is trying to produce so I know if its appropriate for me to try and modify the config to match my requirements or Im better to start from scratch. And yes, I know I dont know much about OpenSER! :P Im trying to learn! thanks Andy. ________________________________________________ Message sent using UK Grid Webmail 2.7.9

1 0

[OpenSER-Users] Variable $rc
by Douglas Garstang 16 Jan '08

16 Jan '08

What's the point of the pseudo variable $rc? If I use avp_db_query() with: invalid SQL, then rc = -1. database down: then rc = -1. Everything fine... then rc = -1!!! What's the point? Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

4 3

[OpenSER-Users] Presence Problem on v1.3.0
by fengbin 16 Jan '08

16 Jan '08

Hi,All When I tried to start openser with presence module.I met an error of "ERROR:core:set_mod_param_regex: parameter <force_active> not found in module <presence>" But I used the presence before with openser of v1.2.0 and it works fine. Can you take a look at it? THX BR The encolsed is my config file. -- Fengbin

2 1

[OpenSER-Users] Openser and RTPProxy
by Patrick Baker 16 Jan '08

16 Jan '08

Is is possible to have a SIP UA behind nat and communicate to an OpenSER/RTP Proxy server behind nat behind nat and have everything transverse appropriately? Or will I need something additional like STUN? Example: OpenSER + RTP Proxy + Asterisk will all reside on the same machine. SIP UA -> Cisco PIX ( Public IP to Localnet NAT ) -> OpenSER/RTP -> Asterisk Thank you for your time, Patrick

4 7

[OpenSER-Users] OpenSer 1.3 Presence Problem
by Ross Beer 15 Jan '08

15 Jan '08

Hi All, I am trying to setup an OpenSER server with support for registration, messaging & presence however I am having a problem with the presence server. I have had presence working correctly before, however for some reason it is no longer working. I have spent about two days trying everything! I would really appreciate some advice with this. I have included my config below. Thank you in advance, Ross ------------------------------------------------------------------------------ listen = udp:my.ip.address:5060 mpath = "/usr/local/lib64/openser/modules" children = 8 debug = 3 fork = yes disable_tcp = no #log_facility = LOG_DAEMON log_facility = LOG_LOCAL0 log_stderror = yes tcp_children = 4 mhomed = no server_signature = yes #sock_group = "openser" #sock_mode = 0600 #sock_user = "openser" #unix_sock = "/tmp/openser.sock" #unix_sock_children = 1 #reply_to_via = no #sip_warning = no #check_via = no #dns = no #rev_dns = no #disable_core_dump = no #dns_try_ipv6 = yes #dns_use_search_list = yes loadmodule "usrloc.so" modparam("usrloc", "user_column", "username") modparam("usrloc", "domain_column", "domain") modparam("usrloc", "contact_column", "contact") modparam("usrloc", "expires_column", "expires") modparam("usrloc", "q_column", "q") modparam("usrloc", "callid_column", "callid") modparam("usrloc", "cseq_column", "cseq") modparam("usrloc", "methods_column", "methods") modparam("usrloc", "flags_column", "flags") modparam("usrloc", "user_agent_column", "user_agent") modparam("usrloc", "received_column", "received") modparam("usrloc", "socket_column", "socket") modparam("usrloc", "use_domain", 0) modparam("usrloc", "desc_time_order", 0) modparam("usrloc", "timer_interval", 60) modparam("usrloc", "db_url", "mysql://username:password@localhost/openser") modparam("usrloc", "db_mode", 1) modparam("usrloc", "matching_mode", 0) modparam("usrloc", "cseq_delay", 20) modparam("usrloc", "nat_bflag", 6) loadmodule "registrar.so" modparam("registrar", "default_expires", 3600) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 0) modparam("registrar", "default_q", 0) modparam("registrar", "append_branches", 1) modparam("registrar", "case_sensitive", 0) modparam("registrar", "received_param", "received") modparam("registrar", "max_contacts", 0) modparam("registrar", "retry_after", 0) modparam("registrar", "method_filtering", 0) modparam("registrar", "path_mode", 2) modparam("registrar", "path_use_received", 0) modparam("registrar", "received_avp", "$avp(i:801)") loadmodule "rr.so" modparam("rr", "enable_full_lr", 1) modparam("rr", "append_fromtag", 1) modparam("rr", "enable_double_rr", 1) modparam("rr", "add_username", 0) loadmodule "tm.so" modparam("tm", "fr_timer", 30) modparam("tm", "fr_inv_timer", 120) modparam("tm", "wt_timer", 5) modparam("tm", "delete_timer", 2) modparam("tm", "noisy_ctimer", 0) modparam("tm", "ruri_matching", 1) modparam("tm", "via1_matching", 1) modparam("tm", "unix_tx_timeout", 2) modparam("tm", "restart_fr_on_each_reply", 1) modparam("tm", "pass_provisional_replies", 0) loadmodule "xlog.so" modparam("xlog", "buf_size", 4096) modparam("xlog", "force_color", 1) loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") #modparam("mi_fif0", "fifo_name", "FIFO") modparam("mi_fifo", "fifo_mode", 0660) #modparam("mi_fifo", "fifo_group", "openser") #modparam("mi_fifo", "fifo_user", "openser") modparam("mi_fifo", "reply_dir", "/tmp/") modparam("mi_fifo", "reply_indent", "\t") loadmodule "domain.so" modparam("domain", "db_url", "mysql://username:password@localhost/openser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 0) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "") modparam("nathelper", "rtpproxy_disable_tout", 60) modparam("nathelper", "rtpproxy_tout", 1) modparam("nathelper", "rtpproxy_retr", 5) modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "received_avp", "$avp(i:801)") loadmodule "textops.so" loadmodule "mediaproxy.so" #modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock") modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy", "sip_asymmetrics", "/etc/openser/sip-asymmetric-clients") modparam("mediaproxy", "rtp_asymmetrics", "/etc/openser/rtp-asymmetric-clients") modparam("mediaproxy", "natping_interval", 60) loadmodule "uri.so" loadmodule "sl.so" modparam("sl", "enable_stats", 1) loadmodule "maxfwd.so" modparam("maxfwd", "max_limit", 256) loadmodule "mysql.so" modparam("mysql", "ping_interval", 300) modparam("mysql", "auto_reconnect", 1) loadmodule "auth.so" modparam("auth", "nonce_expire", 300) modparam("auth", "rpid_suffix", ";party=calling;id-type=subscriber;screen=yes") modparam("auth", "rpid_avp", "$avp(s:rpid)") loadmodule "auth_db.so" modparam("auth_db", "db_url", "mysql://username:password@localhost/openser") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") modparam("auth_db", "password_column", "password") #modparam("auth_db", "password_column_2", "ha1b") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "use_domain", 0) modparam("auth_db", "load_credentials", "$avp(s:caller_uuid)=id") loadmodule "uri_db.so" modparam("uri_db", "db_url", "mysql://username:password@localhost/openser") modparam("uri_db", "uri_table", "uri") modparam("uri_db", "uri_user_column", "username") modparam("uri_db", "uri_domain_column", "domain") modparam("uri_db", "uri_uriuser_column", "uri_user") modparam("uri_db", "subscriber_table", "subscriber") modparam("uri_db", "subscriber_user_column", "username") modparam("uri_db", "subscriber_domain_column", "domain") modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "use_domain", 0) loadmodule "avpops.so" modparam("avpops", "db_url", "mysql://username:password@localhost/openser") modparam("avpops", "avp_table", "usr_preferences") modparam("avpops", "use_domain", 0) modparam("avpops", "uuid_column", "id") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") loadmodule "enum.so" modparam("enum", "domain_suffix", "e164.org.") loadmodule "permissions.so" #modparam("permissions", "default_allow_file", "permissions.allow") #modparam("permissions", "default_deny_file", "permissions.deny") #modparam("permissions", "check_all_branches", 1) #modparam("permissions", "allow_suffix", ".allow") #modparam("permissions", "deny_suffix", ".deny") modparam("permissions", "db_url", "mysql://username:password@localhost/openser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "source_col", "src_ip") modparam("permissions", "proto_col", "proto") modparam("permissions", "from_col", "from_pattern") modparam("permissions", "tag_col", "tag") modparam("permissions", "peer_tag_avp", "$avp(i:707)") loadmodule "lcr.so" modparam("lcr", "db_url", "mysql://username:password@localhost/openser") modparam("lcr", "gw_table", "gw") modparam("lcr", "gw_name_column", "gw_name") modparam("lcr", "ip_addr_column", "ip_addr") modparam("lcr", "port_column", "port") modparam("lcr", "uri_scheme_column", "uri_scheme") modparam("lcr", "transport_column", "transport") modparam("lcr", "grp_id_column", "grp_id") modparam("lcr", "lcr_table", "lcr") modparam("lcr", "strip_column", "strip") modparam("lcr", "prefix_column", "prefix") modparam("lcr", "from_uri_column", "from_uri") modparam("lcr", "priority_column", "priority") modparam("lcr", "gw_uri_avp", "$avp(i:709)") modparam("lcr", "ruri_user_avp", "$avp(i:500)") modparam("lcr", "contact_avp", "$avp(i:711)") modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)") modparam("lcr", "fr_inv_timer", 90) modparam("lcr", "fr_inv_timer_next", 30) modparam("lcr", "rpid_avp", "$avp(i:302)") modparam("lcr", "dm_flag", 25) loadmodule "alias_db.so" modparam("alias_db", "db_url", "mysql://username:password@localhost/openser") modparam("alias_db", "user_column", "username") modparam("alias_db", "domain_column", "domain") modparam("alias_db", "alias_user_column", "alias_username") modparam("alias_db", "alias_domain_column", "alias_domain") modparam("alias_db", "use_domain", 0) # ----- presence params ----- loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_mwi.so" loadmodule "pua.so" loadmodule "pua_mi.so" loadmodule "pua_usrloc.so" modparam("presence|presence_xml", "db_url","mysql://username:password@localhost/openser") modparam("presence_xml", "force_active", 1) modparam("presence", "server_address", "sip:my.ip.address:5060") modparam("presence", "presentity_table", "presentity") modparam("presence", "active_watchers_table", "active_watchers") modparam("presence", "watchers_table", "watchers") modparam("presence", "clean_period", 100) modparam("presence", "max_expires", 3600) modparam("presence", "fallback2db", 1) modparam("presence_xml", "xcap_table", "xcap") modparam("presence_xml", "pidf_manipulation", 1) modparam("presence_xml", "integrated_xcap_server", 1) modparam("pua_usrloc", "default_domain", "my.domain.com") modparam("presence", "to_tag_pref", 'pres') ######################################################################## # Request route 'main' ######################################################################## route[0] { xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); force_rport(); if(msg:len > max_len) { xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("513", "Message Too Big"); exit; } if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("483", "Too Many Hops"); exit; } if(!is_method("REGISTER|MESSAGE")) { if(nat_uac_test("19")) { record_route(";nat=yes"); } else { record_route(); } } if(is_method("CANCEL") || is_method("BYE")) { end_media_session(); } if(loose_route()) { if(!has_totag()) { xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Initial Loose-Routing Rejected"); exit; } if(nat_uac_test("19") || search("^Route:.*;nat=yes")) { fix_nated_contact(); setbflag(6); } route(7); } if(is_method("REGISTER")) { route(6); } if(is_method("INVITE")) { route(8); } if(is_method("PUBLISH|SUBSCRIBE")) { route(17); } if(is_method("CANCEL") || is_method("ACK")) { route(14); } ############################ # MESSAGES # ############################ if(is_method("MESSAGE")) { route(18); } route(15); } ######################################################################## # Request route 'clear-usr-preferences-caller' ######################################################################## route[1] { xlog("L_INFO", "Clear caller preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } ######################################################################## # Request route 'clear-usr-preferences-callee' ######################################################################## route[2] { xlog("L_INFO", "Clear callee preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } ######################################################################## # Request route 'usr-preferences-caller' ######################################################################## route[3] { route(1); xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load caller avps avp_db_load("$avp(s:caller_uuid)", "*"); } ######################################################################## # Request route 'usr-preferences-callee' ######################################################################## route[4] { xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load callee avps avp_db_load("$avp(s:callee_uuid)", "*"); } ######################################################################## # Request route 'stop-media-proxy' ######################################################################## route[5] { if(isflagset(22)) { end_media_session(); } } ######################################################################## # Request route 'base-route-register' ######################################################################## route[6] { sl_send_reply("100", "Trying"); if(!www_authorize("", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setbflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); exit; } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Request route 'base-outbound' ######################################################################## route[7] { xlog("L_INFO", "ROUTE 7 RUN - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(isbflagset(6)) { if(!isflagset(22) && !search("^Content-Length:[ ]*0")) { setflag(22); use_media_proxy(); } t_on_reply("2"); } else { t_on_reply("1"); } if(!isflagset(21)) { t_on_failure("2"); } if(isflagset(29)) { append_branch(); } if(is_present_hf("Proxy-Authorization")) { consume_credentials(); } xlog("L_INFO", "Request leaving server, D-URI='$du' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # no 100 (we already sent it) and no DNS blacklisting if(!t_relay("0x05")) { sl_reply_error(); if(is_method("INVITE") && isbflagset(6)) { end_media_session(); } } exit; } ######################################################################## # Request route 'base-route-invite' ######################################################################## route[8] { sl_send_reply("100", "Trying"); if(from_gw()) { $avp(s:caller_uuid) = "0"; xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); setflag(23); } else { if(allow_trusted()) { if(is_avp_set("$avp(s:peer_uuid)/s")) { # use tag-column from trusted-table as uuid for this caller avp_copy("$avp(s:peer_uuid)", "$avp(s:caller_uuid)/d"); } else { # if no uuid is set, use "0" as default uuid $avp(s:caller_uuid) = "0"; } xlog("L_INFO", "Call from trusted peer with uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(!is_domain_local("$rd")) { xlog("L_INFO", "Rejecting peering attempt with non-local request domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Relaying Denied"); exit; } setflag(23); } else { # if(!proxy_authorize("", "subscriber")) # { # # xlog("L_INFO", "Proxy authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # proxy_challenge("", "0"); # exit; # } # if(!check_from()) # { # # xlog("L_INFO", "Spoofed From-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # sl_send_reply("403", "Spoofed From-URI Detected"); # exit; # } } } if(nat_uac_test("19")) { fix_nated_contact(); setbflag(6); } route(9); } ######################################################################## # Request route 'invite-find-callee' ######################################################################## route[9] { if(alias_db_lookup("dbaliases")) { xlog("L_INFO", "Callee was aliased - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } route(2); if(!is_domain_local("$rd")) { setflag(20); $avp(s:callee_uuid) = "0"; route(11); } avp_delete("$avp(s:callee_uuid)"); avp_db_query("select id from subscriber where username = '$rU'", "$avp(s:callee_uuid)"); if(is_avp_set("$avp(s:callee_uuid)")) { xlog("L_INFO", "Callee is local, uuid='$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(10); } else { $avp(s:callee_uuid) = "0"; xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(11); } exit; } ######################################################################## # Request route 'invite-to-internal' ######################################################################## route[10] { route(4); if(!lookup("location")) { xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Offline"); } else { xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); } exit; } ######################################################################## # Request route 'invite-to-external' ######################################################################## route[11] { if(isflagset(20)) { xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); exit; } route(13); if(!isflagset(23)) { # don't allow calls relaying from PSTN to PSTN, if not explicitely forwarded if(uri =~ "^sip:[0-9]+@") { # only route numeric users to PSTN if(!load_gws()) { xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } if(!next_gw()) { xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } setflag(21); t_on_failure("1"); route(7); } } xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Not Found"); exit; } ######################################################################## # Request route 'normalize-e164' ######################################################################## route[12] { # European numbering plans look like this: # CC = country code (i.e. 43 for Austria) # NDC = national destination code (i.e. 1 for Vienna) # SN = subscriber number (i.e. 4001234) # # CC + NDC + SN, i.e. 4314001234 # # Within the same CC+NDC, it can be omitted, so if # +4314001234 wants to call +4315002345, one can dial # just 5002345. # # Within the same CC, CC can be ommitted and a "0" is prefixed # to NDC, so if +4314001234 wants to call +4326003456, # one can dial 026003456. # # For international calls, either "00" or + is prefixed, like # +49123456780 or 0049123456789. # avp_delete("$avp(s:orig_callee_user)/g"); $avp(s:orig_callee_user) = $rU; if(uri =~ "^sip:(\+[1-9])?[0-9]+@") { # looks like a PSTN number if(uri =~ "^sip:0[1-9][0-9]+@") { # we have format 0+NDC+SN strip(1); prefix("+44"); } else if(uri =~ "^sip:00[1-9]+@") { # we have format 00 + CC + NDC + SN strip(2); prefix("+"); } else if(!uri =~ "^sip:\+[1-9][0-9]+@") { # unknown format, maybe NDC wasn't added before? xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(-1); } # else we have "+" + CC + NDC + SN xlog("L_INFO", "Normalized callee '$avp(s:orig_callee_user)' to E.164 format '$rU' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(1); } else { xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(-1); } } ######################################################################## # Request route 'lookup-enum' ######################################################################## route[13] { route(12); if($rc == 1) { if(enum_query("e164.org.")) { # TODO: do GW fallback (load gws, set failure-route)? xlog("L_INFO", "ENUM query succeeded - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); exit; } else { xlog("L_INFO", "ENUM query failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # ENUM query failed, revert $rU avp_pushto("$ru/username", "$avp(s:orig_callee_user)"); } } } ######################################################################## # Request route 'base-route-local' ######################################################################## route[14] { t_on_reply("1"); if(t_check_trans()) { xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(!t_relay()) { sl_reply_error(); } } else { xlog("L_INFO", "Dropping mis-routed request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } exit; } ######################################################################## # Request route 'base-route-generic' ######################################################################## route[15] { xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("501", "Method Not Supported Here"); exit; } ######################################################################## # Request route 'base-filter-failover' ######################################################################## route[16] { if(!t_check_status("408|500|503")) { xlog("L_INFO", "No failover routing needed for this response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(5); exit; } } ######################################################################### # Presence ######################################################################### route[17] { # if(nat_uac_test("19") || search("^Route:.*;nat=yes")) # { # fix_nated_contact(); # setbflag(6); # } if (!t_newtran()) { sl_reply_error(); exit; }; #if(is_method("PUBLISH")) #{ # xlog("L_INFO", "PUBLISH - Process Publish Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # handle_publish(); # t_release(); #} if(is_method("PUBLISH")) { if($hdr(Sender)!= NULL) handle_publish("$hdr(Sender)"); else handle_publish(); t_release(); } if(is_method("SUBSCRIBE")) { handle_subscribe(); xlog("L_INFO", "SUBSCRIBE - Process Subscribe Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); t_release(); } exit; } ######################################################################## # SEND MESSAGES ######################################################################## route[18] { if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } if (!t_relay()) { sl_reply_error(); }; exit; } ######################################################################## # Reply route 'base-standard-reply' ######################################################################## onreply_route[1] { xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Reply route 'base-nat-reply' ######################################################################## onreply_route[2] { xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); if(nat_uac_test("1")) { fix_nated_contact(); } if(isbflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if(!search("^Content-Length:[ ]*0")) { use_media_proxy(); } } exit; } ######################################################################## # Failure route 'pstn-failover' ######################################################################## failure_route[1] { xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(16); if(!next_gw()) { xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(5); exit; } t_on_failure("1"); route(7); } ######################################################################## # Failure route 'base-standard-failure' ######################################################################## failure_route[2] { route(16); route(5); } _________________________________________________________________ Share what Santa brought you https://www.mycooluncool.com

3 5

[OpenSER-Users] OpenSER + OpenXCAP: NOTIFY response to unsubscription includes xml document?
by KevinKinnan 15 Jan '08

15 Jan '08

Openser: NOTIFY response to unsubscription doesn't have message body. Openser + OpenXCAP: NOTIFY response to unsubscription includes xml document which is the same as one in response to subscription, but the subscription_state in unsub NOTIFY message is "terminated". Can anyone give me a hint? Regards, Kevin _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] OpenSER: no NOTIFY when updating PUBLISH if integrating with OpenXCAP?
by KevinKinnan 15 Jan '08

15 Jan '08

1. Only Openser, no OpenXCAP, force_active=1 NOTIFY with new info is sent from Openser to client when updating PUBLISH message everytime. 2. Openser+OpenXCAP force_active=0 NO NOTIFY is sent from Openser if integrating with OpenXCAP. But PUBLISH message updates properly. I can't figure out why, any clue? Thank you! Kevin, _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

Re: [OpenSER-Users] avp_db_query() timeout
by Douglas Garstang 15 Jan '08

15 Jan '08

Inaki, I am doing updates with avp_db_query, so there is no avp I can check the value of . As I said in a subsequent post, I wrote a simple server that listened on port 3306, like mysql does, and pointed OpenSER at it. The avp_db_query commands() basically blocked forever and openser seemed to completely lose all ability to process new calls. That's really bad. Doug. ----- Original Message ---- From: Iñaki Baz Castillo <ibc(a)aliax.net> To: users(a)lists.openser.org Sent: Monday, January 14, 2008 1:46:00 PM Subject: Re: [OpenSER-Users] avp_db_query() timeout El Lunes, 14 de Enero de 2008, Douglas Garstang escribió: > I haven't had much luck getting replies to my questions lately, hopefully > I'll have more luck with this one. > > avp_db_query().... does it have a timeout? What is it? Can I set it? > > If I use it, and there is a MySQL database problem, I don't want > avp_db_query() to wait forever trying to connect to MySQL. If it can't > connect after a few seconds, I'd like it to just give up. I have multiple > calls to avp_db_query() in a typical call flow. It would be even better if > I could set a flag on the first timeout and not try again during that call. > > Can that be done? Hi, by the test I've done: avp_db_query("SQL_QUERY", "$avp(s:result)"); xlog("L_INFO", "retcode = $rc \n"); Cases: - If query doesn't return a row/value then $avp(s:result)=null and $rc=(-1). - If query returns a row/value the $avp(s_result) stores that value and $rc=1. - If there is a syntax error in query then $avp(s:result)=null and $rc=(-1). - If MySQL is not running then $avp(s:result)=null and $rc=(-1). I don't know what occurs if MySQL is running but because overload or any other reason it doesn't reply, but AFAIK the "avp_db_query" uses the same code of other OpenSer functions to access DB, so I'm sure it has a correct behaviour in case of failure. BTW you can "play" with the $rc code after "avp_db_query". -- Iñaki Baz Castillo _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

3 4

[OpenSER-Users] CPL and $var issue when different process
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hi, maybe someone could confirm this: At the begining of my script I set a variable: $var(gateway) = "123.123.123.123"; Later, I run CPL for calls to internal users and there could be forwardings and so. I set CPL "recurse" parameter so convert 302 from UAS into a new branch into CPL. At the end of CPL I run "route[20]" in which I use the variable $var(gateway), but sometimes it appears empty. I think this could occur because CPL can involve various OpenSer process. I think that when CPL receives a 302, maybe sometimes it's a new OpenSer process and since it's a reply the variable at the begining of my script is not read, so it appears empty. Am I right? A solution is to use AVP instead od variables since AVP's remains along al lthe transaction. Am I right? Thanks for any confirmation. Best regards. -- Iñaki Baz Castillo

4 5

[OpenSER-Users] ¿Se puede enviar DTMF durante el Early Media?
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hola, algo que fastidia a todo el mundo es el tema de que te cobren una llamada nada más salir el buzón de voz. Lo lógico y deseable (al margen de la actitud avariciosa de las grandes operadoras) es que al llamar a un número y salir el buzón de voz no se cobre la llamada y se ofrezca la posibilidad de dejar un mensaje pulsando algún dígito. El impedimento técnico que veo es que parece ser no se permite el envío de DTMF durante el EarlyMedia. Pero no encuentro documentación sobre ello. El caso es que durante el EarlyMedia el audio es bidireccional, o sea, el SDP del "183 Session Progress" dice: a=sendrecv (de hecho esto lo he verificado también a nivel de gateway PSTN: una llamada desde la PSTN a un gateway y éste la dirige a un SIP UAS que responde con 183, y el gateway envía y recibe audio desde el UAS). A todo esto una duda que tengo es precisamente esto de poder enviar y recibir audio durante un EarlyMedia, ¿se puede o no se puede? ¿se hace? Por otra parte, mi Twinkle no me permite enviar DTMF durante el EarlyMedia, pero vamos, que ni lo intenta por lo que no sé qué pasaría si sí me dejase. Y por las pruebas que he hecho llamando desde la PSTN (fijo y móvil) y respondiendo con un EarlyMedia, tampoco parece que se permita el envío de DTMF. En fin, que la única opción honesta que he encontrado es la de reproducir el mensaje del buzón en EarlyMedia, y sólo tras el mensaje responder la llamada para que el llamante deje su mensaje (y sólo en ese caso provocar que tenga que pagar su llamada). Con lo fácil que es... lo cab***as que son las compañías. Bueno, sin más, que no sé exactamente cuál es mi pregunta pero tal vez alguien me ayude a definirla XD Saludos. -- Iñaki Baz Castillo

4 6

[OpenSER-Users] Giving more power to CPL language: Addressbook Categories feature
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hi, in my opinion CPL language is not enough powerful, the absence of regular expression or any header reading makes it poor (IMHO). It would become really cool if it could match AVP's but it can :( I'm trying to give some power to CPL logic. I want to implement "addressbook categories" for each user, this is: each user has its own addressbook in which he can set a category for each contact: - Work - Friend - Family - Custom And of course what I need it a way to match that category **inside** the CPL logic. This is impossible with CPL itself so I'm thinking in a very very dirty trick: ** Addressbook Categories ** - In an incoming call for "bob(a)domain.org" OpenSer will match the callerid against Bob's addressbook. This will return a variable or AVP: $avp(s:caller_category) - CPL module just can match "Organization", "Subject", and "User-Agent", so OpenSer will do: append_hf("Bak_Organization: $hdr(Organization)\r\n"); # To preserve original Organization remove_hf("Organization"); # Remove original Organization append_hf("Organization: $avp(s:caller_category)\r\n"); # Set category as Organization - But since OpenSer appends/removes headers when the message leaves the proxy I can't run CPL now (it will not read the new "Organization" header), so I need to do a dirty loop in order to append the header. - When the message comes back into OpenSer the headers are updated so I do: remove_hf("Organization"); # Remove current Organization (that is a hack) append_hf("Organization: $hdr(Backup_Organization)\r\n"); # Restore original Organization (those changes will be applied again when message leaves OpenSer, not now). - And I run CPL: cpl_run_script("incoming","FORCE_STATEFUL"); - Into CPL I match "Organization" header by: <string-switch field="Organization"> <string is="Friends"> <reject status="reject" reason="I have no friends" /> </string> </string-switch> Is it enough dirty or could I make it more? Any suggestion? how do you people implement things like this? Thank a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 1

[OpenSER-Users] OpenSER logo
by Reinhold Buchinger 15 Jan '08

15 Jan '08

Hi, Where can I find the OpenSER logo in a high resolution? Thanks for your help. Regards, Reinhold

3 2

[OpenSER-Users] CRL/OCSP in OpenSer
by Jan Ruzicka 15 Jan '08

15 Jan '08

Hi, is it possible to use CRL (OCSP)? I found an old message from Klaus (http://www.nabble.com/-Users--CRL-in-OpenSER-to12712663.html#a12712666). As far I don't see mentioned new cfg parameter, I'm afraid its not possible. Are there any plan to use these features? Thanks Jan

2 1

[OpenSER-Users] OpenSER Configuration via files?
by Douglas Garstang 15 Jan '08

15 Jan '08

Asked this question earlier in the week, and didn't get an answer. I'm using avp_db_query to log calls to MySQL. I'd like to be able to turn this and other functionality on and off in the openser.cfg file without having to comment lines. Obviously putting the settings into MySQL and reading them with avp_db_query() doesn't make much sense. Does OpenSER have some sort of simple key/value pair configuration it read from a file so that I can control the basic configuration with? The db_text and db_berkeley modules are unfortunately only designed to be used for userloc data. Why is that? Thanks, Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

2 1

[OpenSER-Users] OpenXCAP: sphere and validity?
by KevinKinnan 15 Jan '08

15 Jan '08

I can't make it work when testing the effect of validity element in conditions element in Openser+OpenXCAP, also happen on sphere element and transformations. The presence document is based on rpid and it is quite simple. The only one I got it work is like below(without validity and sphere elements): <condition> <one id=""> </condition> <actions> <sub-handling>allow</sub-handling> </actions> The following two(adding validity and sphere) are not working: <condition> <one id=""> <validity> <from>...</from> <until>...</until> </validity> </condition> <actions> <sub-handling>allow</sub-handling> </actions> <condition> <shpere value="home"> <one id=""> </condition> <actions> <sub-handling>allow</sub-handling> </actions> Does OpenXCAP support these policies metioned above? Or, Openser is not supporting sphere and validity auth, it only knows sub-handling(xcap_auth.c in openser/modules/presence_xml)? Thank you! Kevin, _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] avp_db_query() timeout
by Douglas Garstang 14 Jan '08

14 Jan '08

I haven't had much luck getting replies to my questions lately, hopefully I'll have more luck with this one. avp_db_query().... does it have a timeout? What is it? Can I set it? If I use it, and there is a MySQL database problem, I don't want avp_db_query() to wait forever trying to connect to MySQL. If it can't connect after a few seconds, I'd like it to just give up. I have multiple calls to avp_db_query() in a typical call flow. It would be even better if I could set a flag on the first timeout and not try again during that call. Can that be done? Doug. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[Serusers] xml rpc documentation
by Srinivas Kotamarti 14 Jan '08

14 Jan '08

Hi, Does anybody know where can I find more documentation on the new XML-RPC module of SER2. I want to write a management plugin for the application I am writing on top of SEMS using the XML-RPC interface. The documentation in the SER2.0 documentation page (http://www.iptel.org/rpc_xml_rpc) does not explain its full functionality and is not enough for writing a plugin. Thanks --Srinivas

2 1

[OpenSER-Users] strange error logs in syslog
by Cseke Tamas 14 Jan '08

14 Jan '08

Hello, We have a lots of error log like this, what fills syslog ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction ERROR:tm:w_t_relay: t_forward_nonack failed ERROR: t_check_status: cannot check status for a reply which has no T-state established Could you tell me how could i avoid this? I think these are not errors. Shall i just change the debug level for this logs? Thanks any help, Tamas

2 2

[OpenSER-Users] radius_does_uri_exist
by Marc LEURENT 14 Jan '08

14 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good afternoon, I'm trying to use the radius_does_uri_exist() function to check if the user exist before forwarding it to voicemail when it's not enable. I'm using radius AAA and the radius_does_uri_exist() seems to fail.. Any idea how to solve it? Thanks # -- uri_radius paramaters -- modparam("uri_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") modparam("uri_radius", "service_type", 11) # Radius service type used in radius_does_uri_exist check. ....... if (!lookup("location")) { if (radius_does_uri_exist()) { # Will Redirect to voicemail when fixed sl_send_reply("480", "Temporarily Unaivailable - Will Redirect To Voicemail"); exit; }; xlog("L_DBG", "ACC RADIUS: 404 NOT FOUND FOR $si \r\n"); sl_send_reply("404", "Not Found"); exit; ..... When I'm trying to call aeron which is not connected but exists, I have a 404 not found whereas I should have a 480... root@krusty:[~L/freeradius]# tail -f radius.log Mon Jan 14 16:08:18 2008 : Auth: Login incorrect: [aeron(a)sip.bob.net/<no User-Password attribute>] (from client private port 0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHi311N4+o+2LtdFwRAgGNAKC4xB0R5mHjgZ0zNKCaEEcqCgCUaQCdG+p0 4KoP/SuAUHJ8u6GFnaOTLYw= =OXcY -----END PGP SIGNATURE-----

1 1

[OpenSER-Users] OpenXCAP problem
by Franz Edler 14 Jan '08

14 Jan '08

Hi OpenXCAP experts, I am trying to setup a demo-configuration for XCAP with Eyebeam- and Bria-client. OpenXCAP and OpenSER are running. When I start-up the Bria-client (data storage via XCAP enabled) I get the following errors from OpenXCAP - log (e.g. for resource-list): Jan 2 13:15:38 sip openxcap[10367]: [HTTPChannel,2,192.168.0.2] error: Invalid Document Selector xcap-root/resource-lists/users//resource-list.xml (the Document Selector context must be 'users' or 'global': 'resource-lists') Jan 2 13:15:38 sip openxcap[10367]: [-] error: Invalid Document Selector xcap-root/resource-lists/users//resource-list.xml (the Document Selector context must be 'users' or 'global': 'resource-lists') The HTTP dialog between the client and the XCAP server is the following: GET /xcap-root/resource-lists/users//resource-list.xml HTTP/1.1 Host: xcap.net1.test:8000 Keep-Alive: Connection: TE, Keep-Alive TE: trailers HTTP/1.1 404 Not Found Date: Wed, 02 Jan 2008 12:15:38 GMT Content-Length: 75 Server: OpenXCAP/0.9.7 the Document Selector context must be 'users' or 'global': 'resource-lists' PUT /xcap-root/resource-lists/users//resource-list.xml HTTP/1.1 Host: xcap.net1.test:8000 Connection: TE TE: trailers Content-Type: application/resource-lists+xml Content-Length: 323 <?xml version="1.0" encoding="UTF-8"?> <resource-lists xmlns="urn:ietf:params:xml:ns:resource-lists" xmlns:cp="counterpath:properties"> <list name="Contact List"> <cp:prop name="category" value="Friends" /> <cp:prop name="category#2" value="Home" /> <cp:prop name="category#3" value="Work" /> </list></resource-lists> HTTP/1.1 404 Not Found Date: Wed, 02 Jan 2008 12:15:38 GMT Content-Length: 75 Server: OpenXCAP/0.9.7 the Document Selector context must be 'users' or 'global': 'resource-lists' Any hint highly appreciated! Franz

2 2

[Serusers] Registration expires timer
by Ranganath B 14 Jan '08

14 Jan '08

Hi, Need help in setting the registration expiry timer at SER. I would like to know the way we can enforce the registration expiry timer from server end. Please update me on the configuration details. Thanks in advance, Ranganath B

2 2

Re: [OpenSER-Users] TLS problem.
by Klaus Darilion 14 Jan '08

14 Jan '08

Hi Fengbin! Cc'ed to the openser list ... fengbin schrieb: > Hi,Klaus, > > How to use NULL cipher? Only setting in Openser is ok? I mean do I need > to set NULL cipher at client site? Usually the NULL cipher is not enabled (for security reasons). You have to enable it on both sides, the server and the client. But if you use the following approach you do not need it. > And where to put xlog("L_ERR","message buffer: $mb"); anywhere in > openser.cfg ? Put it just in the beginning of the route block. regards klaus > THX > BR > > > On 1/11/08, *Klaus Darilion* <klaus.mailinglists(a)pernau.at > <mailto:klaus.mailinglists@pernau.at>> wrote: > > The capture file is not helpful, as it is encrypted. You could use NULL > cipher to have plaintext inside the TLS connection to inspect the > incoming SIP message, or add xlog("L_ERR","message buffer: $mb"); to see > the whole incoming SIP request. > > regards > klaus > > fengbin schrieb: > > Hi,Klaus > > Thank you for your reply. > > The enclosed is the config file ,the pcap between client and > server and > > the log on the openser 's console. > > Could you please take a look at them for me? > > > > THX > > BR > > > > > > On 1/10/08, *Klaus Darilion* <klaus.mailinglists(a)pernau.at > <mailto:klaus.mailinglists@pernau.at> > > <mailto:klaus.mailinglists@pernau.at > <mailto:klaus.mailinglists@pernau.at> >> wrote: > > > > Can you show us the REGISTER request? (both, port 5060 and > port 5061). > > > > Further show use your openser config > > > > regards > > klaus > > > > fengbin schrieb: > > > > > > Hi,all > > > I met a strange problem while I am testing TLS connection > between > > > minisip and openser. > > > The following is my openser.cfg (part of that) > > > > > > ......... > > > fork=no > > > log_stderror=yes > > > > > > # Uncomment this to prevent the blacklisting of > temporary not > > > available destinations > > > #disable_dns_blacklist=yes > > > > > > # # Uncomment this to prevent the IPv6 lookup after v4 > dns lookup > > > failures > > > #dns_try_ipv6=no > > > > > > # uncomment the following lines for TLS support > > > disable_tls = 0 > > > listen = tls: 10.11.57.197:5060 > <http://10.11.57.197:5060> <http://10.11.57.197:5060> > > <http://10.11.57.197:5060> > > > > > > > > > tls_verify_client = 1 > > > tls_method = TLSv1 > > > tls_certificate = "/usr/local/etc/openser//tls/user/user- > > cert.pem" > > > tls_private_key = > > "/usr/local/etc/openser//tls/user/user- privkey.pem" > > > tls_ca_list = "/usr/local/etc/openser//tls/user/user- > calist.pem" > > > tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" > > > ...... > > > > > > When I set "tls:10.11.57.197:5061 > <http://10.11.57.197:5061> <http://10.11.57.197:5061> < > > http://10.11.57.197:5061>" the > > > registration never succeed. But if I set it to 5060 the > registration > > > over TLS is OK. > > > I compared the log of two scenarioes and found the TLS > session > > both are > > > OK,but the difference is that: > > > when the port is 5061 there is an error of forwarding. but the > > > forwarding is because openser think it's not the > destination of > > > the registration request. See bellow: > > > > > > Jan 10 16:46:56 [9199] DBG:rr:after_loose: No next URI > found > > > Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [ 10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197 <http://10.11.57.197>>] == > > > [10.11.57.197 <http://10.11.57.197> > <http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: > checking if port > > > 5061 matches port 5060 > > > Jan 10 16:46:56 [9199] DBG:core:check_self: host != me > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 16:46:56 [9199] DBG:tm:t_newtran: T on > > entrance=0xffffffff > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=78 > > > Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: start > searching: > > > hash=58073, isACK=0 > > > Jan 10 16:46:56 [9199] DBG:tm:matching_3261: RFC3261 > transaction > > > matching failed > > > Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: no > > transaction found > > > Jan 10 16:46:56 [9199] DBG:core:mk_proxy: doing DNS > lookup... > > > Jan 10 16:46:56 [9199] ERROR:tm:update_uac_dst: failed > to fwd > > to af > > > 2, proto 1 (no corresponding listening socket) > > > Jan 10 16:46:56 [9199] ERROR:tm:t_forward_nonack: > failure to add > > > branches > > > > > > > > > > > > With comparition to that when the port is set to 5060 the > trace is : > > > > > > Jan 10 17:07:59 [9410] DBG:rr:find_next_route: No next > Route > > HF found > > > Jan 10 17:07:59 [9410] DBG:rr:after_loose: No next URI > found > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [ 10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197>] == > > > [ 10.11.57.197 <http://10.11.57.197> > <http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if port > > > 5060 matches port 5060 > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197>] == > > > [10.11.57.197 <http://10.11.57.197> < > http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if port > > > 5060 matches port 5060 > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > flags=8000000 > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 17:07:59 [9410] DBG:registrar:build_contact: > created > > Contact > > > HF: Contact: > > <sip:888@10.11.57.192:5061;transport=TLS>;expires=1000 > > > > > > > > > > > > And there is no fwd needed then.So the error didnt occur. > > > > > > Its a little bit strange that when I set the port to > 5061,why did > > > openser check the port 5060????? > > > Can anyone help me to figure it out? > > > THX > > > BR > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Fengbin > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > <mailto:Users@lists.openser.org <mailto:Users@lists.openser.org>> > > > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > -- > > Fengbin > > > > > > > -- > Fengbin

2 5

[OpenSER-Users] OpenSER 1.3 Presence Server
by Ross Beer 13 Jan '08

13 Jan '08

Hi All, I am trying to setup an OpenSER server with support for registration, messaging & presence however I am having a problem with the presence server. I have had presence working correctly before, however for some reason it is no longer working. I have spent about two days trying everything! I would really appreciate some advice with this. I have included my config below. Thank you in advance, Ross ------------------------------------------------------------------------------listen = udp:my.ip.address:5060mpath = "/usr/local/lib64/openser/modules"children = 8debug = 3fork = yesdisable_tcp = no#log_facility = LOG_DAEMONlog_facility = LOG_LOCAL0log_stderror = yestcp_children = 4mhomed = noserver_signature = yes#sock_group = "openser"#sock_mode = 0600#sock_user = "openser"#unix_sock = "/tmp/openser.sock"#unix_sock_children = 1#reply_to_via = no#sip_warning = no#check_via = no#dns = no#rev_dns = no#disable_core_dump = no#dns_try_ipv6 = yes#dns_use_search_list = yesloadmodule "usrloc.so"modparam("usrloc", "user_column", "username")modparam("usrloc", "domain_column", "domain")modparam("usrloc", "contact_column", "contact")modparam("usrloc", "expires_column", "expires")modparam("usrloc", "q_column", "q")modparam("usrloc", "callid_column", "callid")modparam("usrloc", "cseq_column", "cseq")modparam("usrloc", "methods_column", "methods")modparam("usrloc", "flags_column", "flags")modparam("usrloc", "user_agent_column", "user_agent")modparam("usrloc", "received_column", "received")modparam("usrloc", "socket_column", "socket")modparam("usrloc", "use_domain", 0)modparam("usrloc", "desc_time_order", 0)modparam("usrloc", "timer_interval", 60)modparam("usrloc", "db_url", "mysql://username:password@localhost/openser")modparam("usrloc", "db_mode", 1)modparam("usrloc", "matching_mode", 0)modparam("usrloc", "cseq_delay", 20)modparam("usrloc", "nat_bflag", 6)loadmodule "registrar.so"modparam("registrar", "default_expires", 3600)modparam("registrar", "min_expires", 60)modparam("registrar", "max_expires", 0)modparam("registrar", "default_q", 0)modparam("registrar", "append_branches", 1)modparam("registrar", "case_sensitive", 0)modparam("registrar", "received_param", "received")modparam("registrar", "max_contacts", 0)modparam("registrar", "retry_after", 0)modparam("registrar", "method_filtering", 0)modparam("registrar", "path_mode", 2)modparam("registrar", "path_use_received", 0)modparam("registrar", "received_avp", "$avp(i:801)")loadmodule "rr.so"modparam("rr", "enable_full_lr", 1)modparam("rr", "append_fromtag", 1)modparam("rr", "enable_double_rr", 1)modparam("rr", "add_username", 0)loadmodule "tm.so"modparam("tm", "fr_timer", 30)modparam("tm", "fr_inv_timer", 120)modparam("tm", "wt_timer", 5)modparam("tm", "delete_timer", 2)modparam("tm", "noisy_ctimer", 0)modparam("tm", "ruri_matching", 1)modparam("tm", "via1_matching", 1)modparam("tm", "unix_tx_timeout", 2)modparam("tm", "restart_fr_on_each_reply", 1)modparam("tm", "pass_provisional_replies", 0) loadmodule "xlog.so"modparam("xlog", "buf_size", 4096)modparam("xlog", "force_color", 1)loadmodule "mi_fifo.so"modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")#modparam("mi_fif0", "fifo_name", "FIFO")modparam("mi_fifo", "fifo_mode", 0660)#modparam("mi_fifo", "fifo_group", "openser")#modparam("mi_fifo", "fifo_user", "openser")modparam("mi_fifo", "reply_dir", "/tmp/")modparam("mi_fifo", "reply_indent", "\t")loadmodule "domain.so"modparam("domain", "db_url", "mysql://username:password@localhost/openser")modparam("domain", "db_mode", 1)modparam("domain", "domain_table", "domain")modparam("domain", "domain_col", "domain")loadmodule "nathelper.so"modparam("nathelper", "natping_interval", 0)modparam("nathelper", "ping_nated_only", 1)modparam("nathelper", "rtpproxy_sock", "")modparam("nathelper", "rtpproxy_disable_tout", 60)modparam("nathelper", "rtpproxy_tout", 1)modparam("nathelper", "rtpproxy_retr", 5)modparam("nathelper", "sipping_method", "OPTIONS")modparam("nathelper", "received_avp", "$avp(i:801)")loadmodule "textops.so"loadmodule "mediaproxy.so"#modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock")modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock")modparam("mediaproxy", "sip_asymmetrics", "/etc/openser/sip-asymmetric-clients")modparam("mediaproxy", "rtp_asymmetrics", "/etc/openser/rtp-asymmetric-clients")modparam("mediaproxy", "natping_interval", 60)loadmodule "uri.so"loadmodule "sl.so"modparam("sl", "enable_stats", 1)loadmodule "maxfwd.so"modparam("maxfwd", "max_limit", 256)loadmodule "mysql.so"modparam("mysql", "ping_interval", 300)modparam("mysql", "auto_reconnect", 1)loadmodule "auth.so"modparam("auth", "nonce_expire", 300)modparam("auth", "rpid_suffix", ";party=calling;id-type=subscriber;screen=yes")modparam("auth", "rpid_avp", "$avp(s:rpid)")loadmodule "auth_db.so"modparam("auth_db", "db_url", "mysql://username:password@localhost/openser")modparam("auth_db", "user_column", "username")modparam("auth_db", "domain_column", "domain")modparam("auth_db", "password_column", "password")#modparam("auth_db", "password_column_2", "ha1b")modparam("auth_db", "calculate_ha1", 1)modparam("auth_db", "use_domain", 0)modparam("auth_db", "load_credentials", "$avp(s:caller_uuid)=id")loadmodule "uri_db.so"modparam("uri_db", "db_url", "mysql://username:password@localhost/openser")modparam("uri_db", "uri_table", "uri")modparam("uri_db", "uri_user_column", "username")modparam("uri_db", "uri_domain_column", "domain")modparam("uri_db", "uri_uriuser_column", "uri_user")modparam("uri_db", "subscriber_table", "subscriber")modparam("uri_db", "subscriber_user_column", "username")modparam("uri_db", "subscriber_domain_column", "domain")modparam("uri_db", "use_uri_table", 0)modparam("uri_db", "use_domain", 0)loadmodule "avpops.so"modparam("avpops", "db_url", "mysql://username:password@localhost/openser")modparam("avpops", "avp_table", "usr_preferences")modparam("avpops", "use_domain", 0)modparam("avpops", "uuid_column", "id")modparam("avpops", "username_column", "username")modparam("avpops", "domain_column", "domain")modparam("avpops", "attribute_column", "attribute")modparam("avpops", "value_column", "value")modparam("avpops", "type_column", "type")loadmodule "enum.so"modparam("enum", "domain_suffix", "e164.org.")loadmodule "permissions.so"#modparam("permissions", "default_allow_file", "permissions.allow")#modparam("permissions", "default_deny_file", "permissions.deny")#modparam("permissions", "check_all_branches", 1)#modparam("permissions", "allow_suffix", ".allow")#modparam("permissions", "deny_suffix", ".deny")modparam("permissions", "db_url", "mysql://username:password@localhost/openser")modparam("permissions", "db_mode", 1)modparam("permissions", "trusted_table", "trusted")modparam("permissions", "source_col", "src_ip")modparam("permissions", "proto_col", "proto")modparam("permissions", "from_col", "from_pattern")modparam("permissions", "tag_col", "tag")modparam("permissions", "peer_tag_avp", "$avp(i:707)")loadmodule "lcr.so"modparam("lcr", "db_url", "mysql://username:password@localhost/openser")modparam("lcr", "gw_table", "gw")modparam("lcr", "gw_name_column", "gw_name")modparam("lcr", "ip_addr_column", "ip_addr")modparam("lcr", "port_column", "port")modparam("lcr", "uri_scheme_column", "uri_scheme")modparam("lcr", "transport_column", "transport")modparam("lcr", "grp_id_column", "grp_id")modparam("lcr", "lcr_table", "lcr")modparam("lcr", "strip_column", "strip")modparam("lcr", "prefix_column", "prefix")modparam("lcr", "from_uri_column", "from_uri")modparam("lcr", "priority_column", "priority")modparam("lcr", "gw_uri_avp", "$avp(i:709)")modparam("lcr", "ruri_user_avp", "$avp(i:500)")modparam("lcr", "contact_avp", "$avp(i:711)")modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)")modparam("lcr", "fr_inv_timer", 90)modparam("lcr", "fr_inv_timer_next", 30)modparam("lcr", "rpid_avp", "$avp(i:302)")modparam("lcr", "dm_flag", 25) loadmodule "alias_db.so"modparam("alias_db", "db_url", "mysql://username:password@localhost/openser")modparam("alias_db", "user_column", "username")modparam("alias_db", "domain_column", "domain")modparam("alias_db", "alias_user_column", "alias_username")modparam("alias_db", "alias_domain_column", "alias_domain")modparam("alias_db", "use_domain", 0) # ----- presence params -----loadmodule "presence.so"loadmodule "presence_xml.so"loadmodule "presence_mwi.so"loadmodule "pua.so"loadmodule "pua_mi.so"loadmodule "pua_usrloc.so"modparam("presence|presence_xml", "db_url","mysql://username:password@localhost/openser")modparam("presence_xml", "force_active", 1)modparam("presence", "server_address", "sip:my.ip.address:5060")modparam("presence", "presentity_table", "presentity")modparam("presence", "active_watchers_table", "active_watchers")modparam("presence", "watchers_table", "watchers")modparam("presence", "clean_period", 100)modparam("presence", "max_expires", 3600)modparam("presence", "fallback2db", 1)modparam("presence_xml", "xcap_table", "xcap")modparam("presence_xml", "pidf_manipulation", 1)modparam("presence_xml", "integrated_xcap_server", 1)modparam("pua_usrloc", "default_domain", "my.domain.com")modparam("presence", "to_tag_pref", 'pres') ######################################################################### Request route 'main'########################################################################route[0]{xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");force_rport();if(msg:len > max_len){xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("513", "Message Too Big");exit;}if (!mf_process_maxfwd_header("10")){xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("483", "Too Many Hops");exit;}if(!is_method("REGISTER|MESSAGE")){if(nat_uac_test("19")){record_route(";nat=yes");}else{record_route();}}if(is_method("CANCEL") || is_method("BYE")){end_media_session();}if(loose_route()){if(!has_totag()){xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Initial Loose-Routing Rejected");exit;}if(nat_uac_test("19") || search("^Route:.*;nat=yes")){fix_nated_contact();setbflag(6);}route(7);}if(is_method("REGISTER")){route(6);}if(is_method("INVITE")){route(8);}if(is_method("PUBLISH|SUBSCRIBE")){route(17);}if(is_method("CANCEL") || is_method("ACK")){route(14);}############################# MESSAGES #############################if(is_method("MESSAGE")){route(18);}route(15);}######################################################################### Request route 'clear-usr-preferences-caller'########################################################################route[1]{xlog("L_INFO", "Clear caller preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}######################################################################### Request route 'clear-usr-preferences-callee'########################################################################route[2]{xlog("L_INFO", "Clear callee preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}######################################################################### Request route 'usr-preferences-caller'########################################################################route[3]{route(1);xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# load caller avpsavp_db_load("$avp(s:caller_uuid)", "*");}######################################################################### Request route 'usr-preferences-callee'########################################################################route[4]{xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# load callee avpsavp_db_load("$avp(s:callee_uuid)", "*");}######################################################################### Request route 'stop-media-proxy'########################################################################route[5]{if(isflagset(22)){end_media_session();}}######################################################################### Request route 'base-route-register'########################################################################route[6]{sl_send_reply("100", "Trying");if(!www_authorize("", "subscriber")) {xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");www_challenge("", "0");exit;}if(!check_to()) {xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Spoofed To-URI Detected");exit;}consume_credentials();if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) {fix_nated_register();setbflag(6);}if(!save("location")) {xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_reply_error();exit;}xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");exit;}######################################################################### Request route 'base-outbound'########################################################################route[7]{xlog("L_INFO", "ROUTE 7 RUN - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(isbflagset(6)){if(!isflagset(22) && !search("^Content-Length:[ ]*0")){setflag(22);use_media_proxy();}t_on_reply("2");}else{t_on_reply("1");}if(!isflagset(21)){t_on_failure("2");}if(isflagset(29)){append_branch();}if(is_present_hf("Proxy-Authorization")){consume_credentials();}xlog("L_INFO", "Request leaving server, D-URI='$du' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# no 100 (we already sent it) and no DNS blacklistingif(!t_relay("0x05")){sl_reply_error();if(is_method("INVITE") && isbflagset(6)){end_media_session();}}exit;}######################################################################### Request route 'base-route-invite'########################################################################route[8]{sl_send_reply("100", "Trying");if(from_gw()){$avp(s:caller_uuid) = "0";xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");setflag(23);}else{if(allow_trusted()){if(is_avp_set("$avp(s:peer_uuid)/s")){# use tag-column from trusted-table as uuid for this calleravp_copy("$avp(s:peer_uuid)", "$avp(s:caller_uuid)/d");}else{# if no uuid is set, use "0" as default uuid$avp(s:caller_uuid) = "0";}xlog("L_INFO", "Call from trusted peer with uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(!is_domain_local("$rd")){xlog("L_INFO", "Rejecting peering attempt with non-local request domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Relaying Denied");exit;}setflag(23);}else{# if(!proxy_authorize("", "subscriber")) # {# # xlog("L_INFO", "Proxy authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# proxy_challenge("", "0");# exit;# }# if(!check_from()) # {# # xlog("L_INFO", "Spoofed From-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# sl_send_reply("403", "Spoofed From-URI Detected");# exit;# }}}if(nat_uac_test("19")) {fix_nated_contact();setbflag(6);}route(9);}######################################################################### Request route 'invite-find-callee'########################################################################route[9]{if(alias_db_lookup("dbaliases")){xlog("L_INFO", "Callee was aliased - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}route(2);if(!is_domain_local("$rd")){setflag(20);$avp(s:callee_uuid) = "0";route(11);}avp_delete("$avp(s:callee_uuid)");avp_db_query("select id from subscriber where username = '$rU'", "$avp(s:callee_uuid)");if(is_avp_set("$avp(s:callee_uuid)")){xlog("L_INFO", "Callee is local, uuid='$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(10);}else{$avp(s:callee_uuid) = "0";xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(11);}exit;}######################################################################### Request route 'invite-to-internal'########################################################################route[10]{route(4);if(!lookup("location")) {xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("404", "User Offline");}else{xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);}exit;}######################################################################### Request route 'invite-to-external'########################################################################route[11]{if(isflagset(20)){xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);exit;}route(13);if(!isflagset(23)){# don't allow calls relaying from PSTN to PSTN, if not explicitely forwardedif(uri =~ "^sip:[0-9]+@"){# only route numeric users to PSTNif(!load_gws()){xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("503", "PSTN Termination Currently Unavailable");exit;}if(!next_gw()){xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("503", "PSTN Termination Currently Unavailable");exit;}setflag(21);t_on_failure("1");route(7);}}xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("404", "User Not Found");exit;}######################################################################### Request route 'normalize-e164'########################################################################route[12]{# European numbering plans look like this:# CC = country code (i.e. 43 for Austria)# NDC = national destination code (i.e. 1 for Vienna)# SN = subscriber number (i.e. 4001234)# # CC + NDC + SN, i.e. 4314001234## Within the same CC+NDC, it can be omitted, so if# +4314001234 wants to call +4315002345, one can dial# just 5002345.## Within the same CC, CC can be ommitted and a "0" is prefixed# to NDC, so if +4314001234 wants to call +4326003456, # one can dial 026003456.## For international calls, either "00" or + is prefixed, like# +49123456780 or 0049123456789.#avp_delete("$avp(s:orig_callee_user)/g");$avp(s:orig_callee_user) = $rU;if(uri =~ "^sip:(\+[1-9])?[0-9]+@"){# looks like a PSTN numberif(uri =~ "^sip:0[1-9][0-9]+@"){# we have format 0+NDC+SNstrip(1);prefix("+44");}else if(uri =~ "^sip:00[1-9]+@"){# we have format 00 + CC + NDC + SNstrip(2);prefix("+");}else if(!uri =~ "^sip:\+[1-9][0-9]+@"){# unknown format, maybe NDC wasn't added before?xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(-1);}# else we have "+" + CC + NDC + SNxlog("L_INFO", "Normalized callee '$avp(s:orig_callee_user)' to E.164 format '$rU' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(1);}else{xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(-1);}}######################################################################### Request route 'lookup-enum'########################################################################route[13]{route(12);if($rc == 1){if(enum_query("e164.org.")){# TODO: do GW fallback (load gws, set failure-route)?xlog("L_INFO", "ENUM query succeeded - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);exit;}else{xlog("L_INFO", "ENUM query failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# ENUM query failed, revert $rUavp_pushto("$ru/username", "$avp(s:orig_callee_user)");}}}######################################################################### Request route 'base-route-local'########################################################################route[14]{t_on_reply("1");if(t_check_trans()){xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(!t_relay()){sl_reply_error();}}else{xlog("L_INFO", "Dropping mis-routed request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}exit;}######################################################################### Request route 'base-route-generic'########################################################################route[15]{xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("501", "Method Not Supported Here");exit;}######################################################################### Request route 'base-filter-failover'########################################################################route[16]{if(!t_check_status("408|500|503")){xlog("L_INFO", "No failover routing needed for this response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(5);exit;}}########################################################################## Presence#########################################################################route[17]{# if(nat_uac_test("19") || search("^Route:.*;nat=yes"))# {# fix_nated_contact();# setbflag(6);# } if (!t_newtran()){sl_reply_error();exit;};#if(is_method("PUBLISH"))#{# xlog("L_INFO", "PUBLISH - Process Publish Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# handle_publish();# t_release();#}if(is_method("PUBLISH")){if($hdr(Sender)!= NULL)handle_publish("$hdr(Sender)");elsehandle_publish();t_release();}if(is_method("SUBSCRIBE")){handle_subscribe();xlog("L_INFO", "SUBSCRIBE - Process Subscribe Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");t_release();}exit;}######################################################################### SEND MESSAGES########################################################################route[18]{if (!lookup("location")) {switch ($retcode) {case -1:case -3:t_newtran();t_reply("404", "Not Found");exit;case -2:sl_send_reply("405", "Method Not Allowed");exit;}}if (!t_relay()) {sl_reply_error();};exit;}######################################################################### Reply route 'base-standard-reply'########################################################################onreply_route[1]{xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n");exit;}######################################################################### Reply route 'base-nat-reply'########################################################################onreply_route[2]{xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n");if(nat_uac_test("1")){fix_nated_contact();}if(isbflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") {if(!search("^Content-Length:[ ]*0")){use_media_proxy();}}exit;}######################################################################### Failure route 'pstn-failover'########################################################################failure_route[1]{xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(16);if(!next_gw()){xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(5);exit;}t_on_failure("1");route(7);}######################################################################### Failure route 'base-standard-failure'########################################################################failure_route[2]{route(16);route(5);} _________________________________________________________________ Get Hotmail on your mobile, text MSN to 63463! http://mobile.uk.msn.com/pc/mail.aspx

1 0

[OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment
by Adrian Georgescu 13 Jan '08

13 Jan '08

>>> I would _really_ recommend to add this to the installations instructions on openxcap.org. Have a nice weekend! Sebastian Done. We will setup a read/write page for OpenXCAP deployment experiences. Regards, Adrian

1 0

[OpenSER-Users] Script variable duration is unexpected
by Iñaki Baz Castillo 13 Jan '08

13 Jan '08

Hi, I've been suffering an extrange issue and now I've realized why. It's related to script variables and their duration. I'm 90% sure that the behaviour is unexpected according to the doc so I've open a bug containing an easy example: https://sourceforge.net/tracker/index.php?func=detail&aid=1870301&group_id=… My conclusion is that using script variables instead of AVP's can be risky in certain cases. Opinions are welcome. Best regards. -- Iñaki Baz Castillo

1 0

Re: [OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment
by Schumann Sebastian 12 Jan '08

12 Jan '08

Dear all I finally found the mistake: My VMWare ESX server for virtualization is not connected to the internet, my local PC was. It didn't come to my mind ever before. Although - I never saw it documented anywhere, that OpenXCAP needs internet access for downloading the namespace files. I would _really_ recommend to add this to the installations instructions on openxcap.org. Have a nice weekend! Sebastian ________________________________ From: Schumann Sebastian Sent: Friday, 11. January 2008 11:54 AM To: users(a)openser.org Subject: [OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment Dear all This week, I tried again to bring up finally the OpenXCAP server. I tried it first acc. the instruction on OpenXCAP.org on my local virtual VMWare Server 1.0 (before, I always used virtualized ESX server). It worked without major issues, meaning I could install lenny, all required files even via apt-get and the OpenXCAP was running. Surprising for me though, because it never worked yet. Now, when I take _the same_ virtual disk and export it to VMWare ESX server, I get the previously discussed errors: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema How can this be possible? I tried three times with three different machines. They work in VMware Server but not in ESX server. I don't find any answer at all neither can I imagine anyhow, how an application error like this occurs running the program on the very same, identical virtualized system with just two different virtualization platforms around. Anybody else has experiences in that, encountered somehow same strange behaviour with the application or has any other advice? I would really welcome every hint in somehow a direction to solve this. I didn't plan to extend my virtual OpenSER testing platform with a local PC, but it seems I have no other possibility so far... Thanks for your help! A nice weekend to all of you. Best regards Sebastian

2 1

[OpenSER-Users] DB aliases for outgoing calls
by Marc LEURENT 11 Jan '08

11 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Evening, I have a little question: I have users with usernames and 10 phone numbers from my SIP/PSTN provider. I have a dbaliases table for incoming calls, in order to redirect the 0xxxxxxxxx number to an user. 0xxxxxxxx1 => bob I would like for outgoing calls to replace the user by the telephone number in the From: Header..... bob => 0xxxxxxxx1 Any idea how to do it? Thanks, Marc Leurent -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHh6ssN4+o+2LtdFwRApxIAKCxqefV7OLejg1Xw6mwre5Yy3jYTQCeM66R bAjagfV/6aoN43hPQcMeKMM= =DQe8 -----END PGP SIGNATURE-----

2 2

[OpenSER-Users] Fix up source address.
by Alex Balashov 11 Jan '08

11 Jan '08

Greetings, I have a strange problem using OpenSER 1.3.x with nathelper. Two ethernet interfaces: eth0 = 192.168.0.0/24 eth1 = outside.ip/29 For some reason, no matter what I do to mangle the requests with nathelper's functions, the packet is *always* sent out of eth1 with the *source address* of the machine's eth0. Obviously, the response from the far-end SIP peer never gets back. The packet does physically go over eth1, I know that much from packet captures. I don't even see how this is possible; when OpenSER issues a packet, shouldn't it originate according to the machine's routing table, take the most specific route, and consequently, adopt the right source address? What gives? I have OpenSER 'listening' on both interfaces, and have tried both on and off with this setting. Thanks, -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

3 5

[OpenSER-Users] RTP-Proxy
by Helmut Kuper 11 Jan '08

11 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, does anybody know, if openser+rtpproxy are able to detect rtp-timeouts and react on them? It would be good for billing. regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHhjWa4tZeNddg3dwRAmZcAJkBmJGh6b2qt/6NbFri0mBZU9BwPQCeNYNS Pb+u2IWB4Xp2K8G9fHkQKyo= =MxAh -----END PGP SIGNATURE-----

9 19

[Serusers] how to replace ruri host part with an avp value?
by Tomasz Zieleniewski 11 Jan '08

11 Jan '08

Hi, How can one replace the ruri host part with the usage of attr2uri method? One can change the domain part with the usage of "domain" param but this leaves the port not changed. I would like to replace the whole host part together with port value. Maybe this can be done other way round? Thanks in advance for any help. Bests -tomasz

2 2

[OpenSER-Users] OpenXCAP: rls-services 404 Not found,and no log?
by KevinKinnan 11 Jan '08

11 Jan '08

I tried example of rfc 4825. Creating resource-lists is ok, but not rls-services, 404 not found response is received. And, there is not any new log appearing in the syslog, I can't debug where I am wrong. HTTP URI is: http://xcap-root/rls-services/users/sip:alice@open-ims.test/index XML is: <?xml version=\"1.0\" encoding=\"UTF-8\"?> <rls-services xmlns=\"urn:ietf:params:xml:ns:rls-services\"> <service uri=\"sip:myfriends@open-ims.test\"> <resource-list>http://xcap-root/resource-lists/users/sip:alice@open-ims.test/index/~~/reso…</resource-list> <packages> <package>presence</package> </packages> </service> </rls-services> Regards, Kevin _________________________________________________________________ 手机也能上 MSN 聊天了，快来试试吧！ http://mobile.msn.com.cn/

2 1

[OpenSER-Users] Strange OpenXCAP behaviour in virtualized environment
by Schumann Sebastian 11 Jan '08

11 Jan '08

Dear all This week, I tried again to bring up finally the OpenXCAP server. I tried it first acc. the instruction on OpenXCAP.org on my local virtual VMWare Server 1.0 (before, I always used virtualized ESX server). It worked without major issues, meaning I could install lenny, all required files even via apt-get and the OpenXCAP was running. Surprising for me though, because it never worked yet. Now, when I take _the same_ virtual disk and export it to VMWare ESX server, I get the previously discussed errors: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema How can this be possible? I tried three times with three different machines. They work in VMware Server but not in ESX server. I don't find any answer at all neither can I imagine anyhow, how an application error like this occurs running the program on the very same, identical virtualized system with just two different virtualization platforms around. Anybody else has experiences in that, encountered somehow same strange behaviour with the application or has any other advice? I would really welcome every hint in somehow a direction to solve this. I didn't plan to extend my virtual OpenSER testing platform with a local PC, but it seems I have no other possibility so far... Thanks for your help! A nice weekend to all of you. Best regards Sebastian

1 0

[OpenSER-Users] Testing.... List Working?
by Douglas Garstang 11 Jan '08

11 Jan '08

Is the list working? Haven't seen much traffic on list today. First post was ok. Second went to list and archive, but I never received it via email. Third has gone nowhere! This is my 4th... ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

[OpenSER-Users] TLS problem.
by fengbin 11 Jan '08

11 Jan '08

Hi,all I met a strange problem while I am testing TLS connection between minisip and openser. The following is my openser.cfg (part of that) ......... fork=no log_stderror=yes # Uncomment this to prevent the blacklisting of temporary not available destinations #disable_dns_blacklist=yes # # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures #dns_try_ipv6=no # uncomment the following lines for TLS support disable_tls = 0 listen = tls:10.11.57.197:5060 tls_verify_client = 1 tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser//tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser//tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser//tls/user/user-calist.pem" tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" ...... When I set "tls:10.11.57.197:5061" the registration never succeed. But if I set it to 5060 the registration over TLS is OK. I compared the log of two scenarioes and found the TLS session both are OK,but the difference is that: when the port is 5061 there is an error of forwarding. but the forwarding is because openser think it's not the destination of the registration request. See bellow: Jan 10 16:46:56 [9199] DBG:rr:after_loose: No next URI found Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: checking if port 5061 matches port 5060 Jan 10 16:46:56 [9199] DBG:core:check_self: host != me Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 16:46:56 [9199] DBG:tm:t_newtran: T on entrance=0xffffffff Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=78 Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: start searching: hash=58073, isACK=0 Jan 10 16:46:56 [9199] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: no transaction found Jan 10 16:46:56 [9199] DBG:core:mk_proxy: doing DNS lookup... Jan 10 16:46:56 [9199] ERROR:tm:update_uac_dst: failed to fwd to af 2, proto 1 (no corresponding listening socket) Jan 10 16:46:56 [9199] ERROR:tm:t_forward_nonack: failure to add branches With comparition to that when the port is set to 5060 the trace is : Jan 10 17:07:59 [9410] DBG:rr:find_next_route: No next Route HF found Jan 10 17:07:59 [9410] DBG:rr:after_loose: No next URI found Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=8000000 Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 17:07:59 [9410] DBG:registrar:build_contact: created Contact HF: Contact: <sip:888@10.11.57.192:5061;transport=TLS>;expires=1000 And there is no fwd needed then.So the error didnt occur. Its a little bit strange that when I set the port to 5061,why did openser check the port 5060????? Can anyone help me to figure it out? THX BR -- Fengbin

3 5

[OpenSER-Users] OpenSER Question
by ListAcct 11 Jan '08

11 Jan '08

Hello, I wanted someones honest opinion. I have ran across and read a little on SER and OpenSER have not yet had much time. But would you recommend OpenSER for a service provider who is wanting or thinking about deploying VoIP service for its customers? What other products would you recommend to work along with OpenSER such as billing and accounting interfacing. We have used Asterisk for our internal PBX for about two years and love it. Or would you recommend staying with a commercial product like Cisco or Sonus? We prefer open source since our base will be small to start and not large enough to justify a Sonus which is the preferred commercial product. Any advice is definitely appreciated. Otis.

2 3

[OpenSER-Users] Configuration Data....?
by Douglas Garstang 11 Jan '08

11 Jan '08

I need a way in OpenSER to store some simple configuration data. For example, if a parameter is set, I might perform database updates with avp_db_query(). I looked at the dbtext, db_berkeley and flatstore modules and realise that they cannot be used for storing generic information. They are designed to be used as a db store for userloc info etc. So, simple question, how can I store global persistent (on disk is ok) information and retrieve it with OpenSER? Thanks, Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

2 1

[OpenSER-Users] Forward to voicemail when not registered
by CSB 10 Jan '08

10 Jan '08

I want to provide for forwarding of calls to voicemail in various circumstances, one of which is when the user is not registered with the registrar. I've looked at various example configuration files that include forwarding (e.g. http://www.sipwise.com/wizard, onsip.org) and have not seen an implementation of this. Could anyone provide any tips regarding this or is it as simple as: route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- <snip> if (!lookup("location")) { if (avp_db_load("$ruri/username", "$avp(i:20116)")) { avp_pushto("$ruri", "$avp(i:20116)"); t_relay; return; } else { sl_send_reply("404", "User Not Found"); return; }; <snip> Am I missing something obvious or is this really quite simple? Regards Cameron

2 1

[OpenSER-Users] openser 1.3 and Serweb
by Daniel 10 Jan '08

10 Jan '08

Hi there, What about openser 1.3 and serweb 0.9.6 ? Do they work fine together ? any experiences ? Regards, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com

1 0

[Serusers] SER 2_0_0 ERROR: slow timer too slow
by tzieleniewski 10 Jan '08

10 Jan '08

Hi, I encountered the following error: Jun 15 08:57:21 rd ser[12680]: ERROR: slow timer too slow: overflow (7997 - 6974 = 1023) Jun 15 08:57:24 rd last message repeated 46 times Could you please point me what could be the reason? Thanks in advance. Tomasz

2 1

[OpenSER-Users] cdrtool datasources
by TCB 10 Jan '08

10 Jan '08

How do i create a datasource for Cisco RAS. -- TC

1 0

[OpenSER-Users] OpenSER & RADIUS accounting with radiusclient-ng
by Antun Mihalicek 10 Jan '08

10 Jan '08

Hi! I'm trying to enable RADIUS accounting on OpenSER with the use of radiusclient-ng, and using FreeRADIUS as radius server. When I initiate or terminate a session on OpenSER, following error occurs: Jan 10 12:21:58 [30155] ERROR:acc:acc_rad_request: radius-ing failed I've been googling for this issue, and I've found out that some people also had this error, but in their case RADIUS packet was sent to RADIUS server but was rejected , but in my case it wasn't even sent to the RADIUS server, as I saw from debug output on FreeRADIUS. As I've seen on forums, people said that this kind of error means that something's wrong with radiusclient-ng. I've used radiusclient-ng 0.5.5 & 0.5.6, both with same results. Did anyone had similar problem? Does radiusclient-ng have some kind of log or something? Thanks for your answer! openser.conf: #set module path mpath="/usr/local/lib/openser/modules/" /* uncomment next line for MySQL DB support */ #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "auth.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "avpops.so" ..... # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) ....

3 3

[OpenSER-Users] Parallel Forking
by Gomtesh Jain 10 Jan '08

10 Jan '08

Hi All, I am facing some problem in parallel forking . how should I handle the scenario where I get 200 ok response from both the branch . Gomtesh

2 3

[OpenSER-Users] Openxcap modification - setting config and runtime dir
by Tomasz Zieleniewski 10 Jan '08

10 Jan '08

Hi, I made a small modification in openxcap version 0.9.7 in file openxcap it enables now to specify the configuration directory and runtime directory. This is very useful when You run openxcap in deamon mode. xcap@venom:~/src/openxcap-0.9.7$ ./openxcap -h usage: openxcap [options] options: --version show program's version number and exit -h, --help show this help message and exit --no-fork run the process in the foreground (for debugging) --pid=File pid file (/var/run/openxcap/openxcap.pid) --conf-dir=Dir config directory (/etc/openxcap) --run-dir=Dir pid file (/var/run/openxcap) Cheers tomasz

1 0

[Serusers] alias as regular expression
by Sandrinho 09 Jan '08

09 Jan '08

Hi all. Is it possible to configure aliases as regular expressions? I mean: I have to manage some accounts on a SER: each account must receive calls on an arc of numbers. so i have an account "foo" with (for example) 200 aliases foo000,foo001,...,foo199. Is it possible to configure only one alias in form of regexp? "foo[01][0-9][0-9]" in this case I don't want to touch ser.cfg. Thanks a lot. Sandro.

1 0

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Got it, you are right , This is set as the default for > rewrite_prefix_column in the > online manual( This might be a typo). > > Got it working 100% now , thanks > > modparam("carrierroute", "rewrite_prefix_column", "rewrite_host" Good. Yes, there is a typo in the documentation. I'll fix this. Cheers, Henning

1 0

[OpenSER-Users] uac_replace_from
by CSB 09 Jan '08

09 Jan '08

I wish to replace the from address in the following manner Received From: "05551233" sip:05551233@203.89.001.001 Replaced From: "5551233" sip:18585551233@203.89.001.001 In other words I want to do what the strip and prefix commands do but on a from header. Could anyone advise how this can be achieved in OpenSER 1.1? Regards Cameron

2 2

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Thanks Henning , i have just realised i had not set the prob, > now the routing works but i'm afraid i have created another > problem. For some reason the ip address is being prefixed to the > called number. > See below. > > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:get_route_tree_by_id: searching in carrier default > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > DBG:carrierroute:get_route_tree_by_id: tree default, domain 0 : 0 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: DBG:core:hash_func: hash: > 2298 % 1000 = 298 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:carrier_rewrite_msg: uri 0727785841 was rewritten to sip: > 196.15.164.13727785841(a)196.15.164.13 > > My carrierroute table looks like this: > > id | carrier | scan_prefix | domain | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix > ----+---------+-------------+--------+------+-------+---------------+----------------+---------------- > 2 | 0 | 072 | 0 | 1 | 1 | 19.1.164.13 | 27 | > 1 | 0 | 011 | 0 | 1 | 1 | 19.1.164.13 | 27 | Hi, your table is correct. I've seens this before, there was some user who copied the content of rewrite_host into rewrite_prefix, i think. Could you check if the RAM-cache on the module has also the correct data? (with 'openserctl fifo cr_dump_routes') Do you do other RURI rewriting before the route[22] where the cr method is called? Cheers, Henning

1 0

[Serusers] parallel forking
by Steven C. Blair 09 Jan '08

09 Jan '08

I seem to be running into problems using avps and parallel forking. Is it possible to insure the invite message sent to each contact address has the same "avp checks" performed for the username portion of the URI? Thanks,Steve

1 0

[OpenSER-Users] OpenSER in front of Asterisk
by lists＠infoway.net 09 Jan '08

09 Jan '08

Hi all, I'm relatively new to OpenSER (and SER for that matter). I have the following need and can't quite figure out how to do it. We have several Asterisk servers being used strictly for IVR purposes (IVR cluster). We also have several Asterisk servers used for standard telephone services and Agent/Queue services (telephone Cluster). We would like to setup one or two OpenSER machines in front of all that to serve the following purposes: 1) Route incoming calls appropriately to either the IVR cluster or the telephone cluster based on the DNIS 2) Be used as LCR servers so that the telephone cluster will send all outbound calls to and the OpenSER will determine if it needs to reach one of our termination carriers or simply just handle it internally (e.g. extension-to-extension calling) 3) When a caller in the IVR presses certain options, the caller may be transferred to an agent. So, we need to take the call away from the IVR cluster (possibly back to the OpenSER server) and redirect it to the telephone cluster so that an agent may handle the caller 4) CDR and billing purposes 5) Ideally, all our telephone users would register with OpenSER (instead of the Asterisk telephone cluster) and for "regular" calls, we could just handle everything within OpenSER, and only involve the telephone cluster if we need to redirect to voicemail or something like that We have read on the wiki about integrating SER with Asterisk for voicemail. We also have some snippets, mainly from the mailing list, about SER load balancing traffic to Asterisk. However, we really haven't found something that could address all items above. Could anyone provide some hits, snippets, or references to what we need in order to accomplish these goals? Thanks

1 0

[OpenSER-Users] Configuring openser to forward incoming to a conference agent
by Pascal Maugeri 09 Jan '08

09 Jan '08

Hi I'm developing a "conference agent" that will receive INVITEs and invites a list of invitees defined in the SIP INVITE message payload. Let's say that this agent is available behind the URI sip:conf@yourdomain.com and openser should forward all incoming "INVITE sip:conf@yourdomain.com SIP/2.0" to my agent. How should I configure openser to do that ? The easiest way would be to have my conference agent to REGISTER against the openser but I don't want to maintain this registration and I think there is a better way to do that. I've seen there is also a function called "ul_insert_urecord" in USRLOC module. Might it be a possible solution to add a new entry for my conference agent ? Any other solution or idea ? Regards, Pascal

2 1

[OpenSER-Users] presence caching and retrieval
by Sigrid Thijs 09 Jan '08

09 Jan '08

Hi, I was wondering, when a SIP user publishes his presence to the openser presence module, is this presence data cached in memory by the server or is this immediately stored in the database? Is this somehow configurable? If the presence data is cached in memory, is there an interface available for an external server to query the presence of one or more resources? In particular, we are looking for a performant way to query the presence of multiple users (for example 20). We would like to avoid the overhead of creating a SIP subscription for each resource: - to avoid traffic overhead - we only need to know the current presence of the resource(s) and are not interested in future presence changes. Do you have any suggestions on if/how this can be achieved with openser? kind regards, Sigrid Thijs

2 1

[OpenSER-Users] Working in TCP but NOT in UDP?
by David Villasmil Govea 09 Jan '08

09 Jan '08

Hello all, I've got a working conf on which RTPs work perfectly with TCP, but fails to work with UDP... can anyont tell me why?? Here's my conf: # # sample config file to be used with nathelper/rtpproxy # # start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899 # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=10 #fifo="/tmp/openser_fifo" # --- module loading mpath="/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" #loadmodule "dispatcher.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "xlog.so" #loadmodule "/usr/lib/openser/modules/acc.so" #modparam("acc", "early_media", 0) #modparam("acc", "report_cancels", 1) #modparam("acc", "db_flag", 2) #modparam("acc", "db_url", "mysql://user:pwd@localhost/openser") #modparam("acc", "report_ack", 0) #modparam("acc", "db_missed_flag", 3) #modparam("acc", "failed_transaction_flag", 4) #modparam("acc", "db_extra", "from_uri=$fu ; to_uri=$tu ; from_user=$fU; source_ip=$si") # --- setting module parameters modparam("usrloc|auth_db","db_url","mysql://user:pwd@localhost/openser") # --- setting module parameters #modparam("dispatcher", "list_file", "/etc/openser/dispatcher.list") # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 3) # -- registrar params -- #modparam("registrar", "received_avp", "$avp(s:rcv)") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper modparam("registrar|nathelper", "received_avp", "$avp(i:42)") modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@whatever.com") #modparam("nathelper", "received_avp", "$avp(s:rcv)") # -- xlog modparam("xlog", "buf_size", 8192) modparam("registrar", "max_contacts", 5) # --- main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; # NAT detection route(2); if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("OPENSER_IP", "subscriber")) { www_challenge("OPENSER_IP", "0"); exit; }; if (isflagset(5)) { setbflag(6); # if you want OPTIONS natpings uncomment next # setflag(7); }; save("location"); exit; }; # # - TERMINATIONS # if (method=="INVITE") { if (!proxy_authorize("OPENSER_IP","subscriber")) { if($si=="GW_IP"){ xlog("L_NOTICE", "\n************** ALLOWING INCOMING CALL AS IT COMES FROM $si ************\n"); }else{ proxy_challenge("OPENSER_IP","0"); exit; } } if (uri=~"^sip:00"){ xlog("L_NOTICE", "\n************** GOT OUTSIDE CALL ************\n"); strip(2); prefix("M3ll4m0d4v1d"); rewritehostport("GW_IP:5060"); sl_send_reply("100","Trying"); forward(); exit(); } } if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } failure_route[1] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } MANY thanks to all. David

5 4

[OpenSER-Users] Carrirroute
by TCB 09 Jan '08

09 Jan '08

Would appreciate some help with CarrierRoute module I get the following error ERROR:carrierroute:carrier_rewrite_msg: error during rewrite_uri_recursor This is my Route route[22] { # route calls based on hash over callid # choose route domain 0 of the default carrier if(!cr_rewrite_uri("0", "call_id")){ sl_send_reply("403", "Not allowed"); } else { # In case of failure, re-route the request t_on_failure("3"); # Relay the request to the gateway t_relay(); } } -- TC

2 1

[OpenSER-Users] INVITE, exec_dset(), and BYE
by Juan Carlos Castro y Castro 09 Jan '08

09 Jan '08

I have a scenario in which an OpenSER machine distributes load among several Asterisk machines for outgoing PSTN. I use an external program which I call through exec_dset() to select which server a call goes to. I use record_route(). All calls are completed OK, but when I dial from some SIP user-agents and hang up from the caller side, OpenSER gets crazy and doesn't know where to route the BYE to. Here's the reason: Good scenario: - I make a call to <5551234@mydomain> - OpenSER calls exec_dset, which turns it into <providercode#5551234@chosenserver> - Call is answered - I hang up - My UA sends a BYE like this: "BYE sip:providercode#5551234@chosenserver SIP/2.0" - I get an OK back, all is well. (Sometimes the # in the uri above is sent as %23, but it works either way) Bad scenario: - I make a call to <5551234@mydomain> - OpenSER calls exec_dset, which turns it into <providercode#5551234@chosenserver> - Call is answered - I hang up - My UA sends a BYE like this: "BYE sip:5551234@mydomain SIP/2.0" - My openser.cfg doesn't know how to handle that and I get a "Loop Detected" back. The destination never gets a hangup signal. Is the second UA from the "bad" scenario disrespecting the RFC? Do I have any recourse to route a BYE that comes like that to the right Asterisk server? Thanks, Juan

3 4

[OpenSER-Users] OpenXCAP: no percent-encoded URI allowed? can't fetch element that beneath multiple-folded elements?
by KevinKinnan 09 Jan '08

09 Jan '08

The OpenXCAP 0.9.7(version 0.9.7) allows the HTTP URI that is not percent-encoded while the percent-encoded URI is rejected by the server. There is no problem of installation. Two types of http URIs are shown below: Accept: http://xcap-root/resource-lists/users/sip:alice@example.com/index/~~/resour…"friends"] Reject: http://xcap-root/resource-lists/users/sip:alice@example.com/index/~~/resour… Another problem is about fetching element that within multiple-folded elements, for example: <list name="friend"> <entry uri="sip:alice@example.com"> <display-name>Alice</display-name> </entry> <entry uri="sip:bob@example.com"> <display-name>Bob</display-name> </entry> </list> <list name="closefriends"> <entry uri="sip:tom@example.com"> <display-name>Tom</display-name> </entry> <entry uri="sip:mike@example.com"> <display-name>Mike</display-name> </entry> </list> If fetching the element of "mike", the responsed to the following URI is "404 Not found". http://xcap-root/resource-lists/users/sip:alice@example.com/index/~~/resour… However, an alternative way of uing element sequence number works. http://xcap-root/resource-lists/users/sip:alice@example.com/index/~~/resour… Hope anyone can give me some clues, thanks a billion Regards, Kevin _________________________________________________________________ MSN 中文网，最新时尚生活资讯，白领聚集门户。 http://cn.msn.com

2 1

[OpenSER-Users] Working in TCP but NOT in UDP?
by David Villasmil Govea 09 Jan '08

09 Jan '08

> > > Hello all, > > > > I've got a working conf on which RTPs work perfectly with TCP, but > > fails to work with UDP... can anyont tell me why?? > > Could you detail more what the issue is? Do you mean that the SIP works > fine > over TCP and fails over UDP? RTP has nothing to do here. > > > -- > I?aki Baz Castillo > Hello, That's exactly what I mean, signalling being TCP or UPD got nothing to do here.... but it DOES work on TCP and NOT over UDP! Weird... David

2 1

Re: [OpenSER-Users] how to restrict invite when regiest unsuccessful
by liu york 09 Jan '08

09 Jan '08

yes, when i used same authenticating on both regiest and invite.the problem was resolved.many many thx. ======= 2008-01-08 15:16:35 您在来信中写道：======= > > >Alex Balashov schrieb: >> On Tue, 8 Jan 2008, liu york wrote: >> >>> I want to restrict invite when regiest unsuccessful even the invite >>> request have right authentication. actually,i just want to only one >>> person can call to pstn,others cant call even have sipid and >>> password.now i has set by modparam("registrar", "max_contacts", 10).but >>> cant restrict the invite by the sipphone no need regiestion. >> >> Are you authenticating INVITEs differently than you are authenticating >> registrations? In other words, are the authentication realm and required >> credentials different for your proxy_challenge() than they are for >> your www_challenge() for handling REGISTER requests? >> >> If they are, it seems that all you should have to do is do a lookup() >> and see if it fails. Presumably, you are doing a save() into your >> registrar/usrloc only on valid REGISTER challenges? >> >> >> i.e. >> >> if(is_method("INVITE")) { >> if(!lookup("location")) { > > if(!registered("location")) { >is sufficient > >btw: this does not give you any security > >regards >klaus > > >> sl_send_reply("403", "Forbidden -- REGISTER invalid."); >> exit; >> } >> } >> >> >> -- >> Alex Balashov >> Evariste Systems >> Web : http://www.evaristesys.com/ >> Tel : +1-678-954-0670 >> Direct : +1-678-954-0671 >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.openser.org >> http://lists.openser.org/cgi-bin/mailman/listinfo/users = = = = = = = = = = = = = = = = = = = = 　　　　　　　　致礼！　　　　　　　　york 　　　　　　　　york(a)goldentek.biz 　　　　　　　　　　2008-01-09

1 0

Re: [OpenSER-Users] CDRTool help?
by Andy Smith 08 Jan '08

08 Jan '08

Sorry, not all of the text I originally sent has appeared on the list archives, so here is the full email another time! :P Hi, can anyone provide any advice on getting CDRTool to work? I have installed CDRTool 6.0 on a Debian Linux system 2.6 Kernel with Apache/2.2.6 (Unix) PHP/5.2.5 I am attempting to get it to work with OpenSER only (I have commented out the Asterisk and sip_trace sections in global.inc) and I am recieving the error: Error initializing CDRTool datasource >From in my web browser. It seems that in callsearch.phtml "$cdr_source" is not being set, but I dont understand why not and I am not sure how to get more debugging info out of the whole thing (Im not used to PHP), I dont see any errors in the syslog :( With regards global.inc, I believe all database usernames and passwords are setup and have successfully tested connecting to all databases with this data - and I believe all db_class sections have the corresponding sections as required (the username, password, tablename etc). thanks for any help! Andy.

2 2

Re: [OpenSER-Users] CDRTool help?
by Andy Smith 08 Jan '08

08 Jan '08

mmm, again! :S well here is the bottom half of my email.... It seems that in callsearch.phtml "$cdr_source" is not being set, but I dont understand why not and I am not sure how to get more debugging info out of the whole thing (Im not used to PHP), I dont see any errors in the syslog :( With regards global.inc, I believe all database usernames and passwords are setup and have successfully tested connecting to all databases with this data - and I believe all db_class sections have the corresponding sections as required (the username, password, tablename etc). thanks for any help! Andy.

1 0

[OpenSER-Users] CDRTool help?
by Andy Smith 08 Jan '08

08 Jan '08

Hi, can anyone provide any advice on getting CDRTool to work? I have installed CDRTool 6.0 on a Debian Linux system 2.6 Kernel with Apache/2.2.6 (Unix) PHP/5.2.5 I am attempting to get it to work with OpenSER only (I have commented out the Asterisk and sip_trace sections in global.inc) and I am recieving the error: Error initializing CDRTool datasource >From in my web browser. It seems that in callsearch.phtml "$cdr_source" is not being set, but I dont understand why not and I am not sure how to get more debugging info out of the whole thing (Im not used to PHP), I dont see any errors in the syslog :( With regards global.inc, I believe all database usernames and passwords are setup and have successfully tested connecting to all databases with this data - and I believe all db_class sections have the corresponding sections as required (the username, password, tablename etc). thanks for any help! Andy.

1 0

[OpenSER-Users] Problem adding permanent user locations using openserctl
by Ashley Unitt 08 Jan '08

08 Jan '08

I've recently installed a vanilla OpenSER v1.3.0 (a new install) and I'm trying to set up permanent user locations using openserctl as I have some devices that won't register on their own. I am currently running without a database. When trying to add a user using the command line "openserctl ul add 100 sip:192.168.1.40" I get the error: ERROR: 400; check if you use aliases in OpenSER. Can someone please give me some pointers on what to try? Thanks Ashley I've modified the openserctlrc as follows: # $Id: openserctlrc,v 1.2 2006/07/05 19:37:20 miconda Exp $ # # openser control tool resource file # # here you can set variables used in the openserctl ## your SIP domain SIP_DOMAIN=openser.development.newvoicemedia.com ## database type: MYSQL or PGSQL, by defaulte none is loaded # DBENGINE=MYSQL ## database host # DBHOST=localhost ## database name # DBNAME=openser ## database read/write user # DBRWUSER=openser ## database read only user # DBROUSER=openserro ## password for database read only user # DBROPW=openserro ## database super user # DBROOTUSER="root" ## type of aliases used: DB - database aliases; UL - usrloc aliases ## - default: none ALIASES_TYPE=""UL ## control engine: FIFO or UNIXSOCK ## - default FIFO # CTLENGINE="FIFO" ## path to FIFO file # OSER_FIFO="FIFO" ## check ACL names; default on (1); off (0) # VERIFY_ACL=1 ## ACL names - if VERIFY_ACL is set, only the ACL names from below list ## are accepted # ACL_GROUPS="local ld int voicemail free-pstn" ## verbose - debug purposes - default '0' VERBOSE=1 Free Phone: 0800 280 2888 Tel: +44 (0)1256 892020 Fax: +44 (0)1256 892200 Registered Office: NewVoiceMedia Ltd, Laverstoke Grange, Laverstoke, Whitchurch, Hants, RG28 7PF NewVoiceMedia Registered in England No: 3602868

1 0

[OpenSER-Users] Openser + Mediaproxy behind NAT
by Halomoan Chow 08 Jan '08

08 Jan '08

Hi Is it possible to put Openser + Mediaproxy behind NAT while serving internal phones and external phones ? Internal phone <-> Openser+MediaProxy <-> NAT <-> external phone (maybe behind nat also) Openser is act as a registrar in this case. If you have successful story with this setting, please share. Thank you so much Regards, Halomoan

2 2

[OpenSER-Users] [OT] Error in Rome VON material about OpenSer and Asterisk Realtime
by Iñaki Baz Castillo 08 Jan '08

08 Jan '08

Hi, just as curiosity I comment that there is an error (an Asterisk error in fact) in the material of the Rome VON course of 2007: In file "config/08-asterisk.conf" it appears: CREATE VIEW sipusers AS SELECT username as name, [...] domain as defaultip, domain as ipaddr, [...] FROM openser.subscriber; There is a bug in case of SIP SRV domains because Asterisk doesn't perform a SRV DNS query for the location of registerd users (just for outbound calls if "srvlookup=yes") so if OpenSer has a SRV SIP domain "my_srv_domain.com" but DNS type A of that domain points to a different IP then Asterisk will fail (it will resolve to the A DNS entry). A simple solution is to modify the view as follows: CREATE VIEW sipusers AS SELECT username as name, [...] __OpenSer_IP__ as defaultip, __OpenSer_IP__ as ipaddr, [...] FROM openser.subscriber; Of course this is a bug in Asterisk since it should, according to RFC3261, perform a SRV query for the location of registered users in case they are not an IP. Just it ;) Regards. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 0

[OpenSER-Users] Question about append-hf and remove_hf
by Helmut Kuper 08 Jan '08

08 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I add some private headerfields (append-hf) during main route resp. sub-routes like "route(3)" and in certain cases I want to remove (remove_hf) some of them in main route befor sending request out. Unfortunately that doesn't work. Even when I add a header field and test for it directly afterwards or try to remove it, openser doesn't find anything. Test-Code is like this: append_hf("P-SI: sad\r\n"); if(is_present_hf("P-SI")) xlog("L_INFO", "######## Found\n"); if(remove_hf("P-SI")) xlog("L_INFO", "######## Removed\n"); textops doc has a hint at append_hf: " ... Note: Headers which are added in main route cannot be removed in further routes (e.g. failure routes). So, the idea is not to add there any headers that you might want to remove later. To add headers temporarely use the branch route because the changes you do there are per-branch. " Not sure if this is the reason for my problem. Is this a bug? Is there a way to add header fields temporarely? regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHg1XQ4tZeNddg3dwRArKlAJ9vTWjg93/MeR8w+7R3XtP90p2eDwCgq/90 OfBsmaeapmBrGez4+Rt8NXQ= =3cte -----END PGP SIGNATURE-----

2 2

Re: [OpenSER-Users] how to restrict invite when regiest unsuccessful
by liu york 08 Jan '08

08 Jan '08

OK,i see,let me try. many thx. ======= 2008-01-08 15:16:35 您在来信中写道：======= > > >Alex Balashov schrieb: >> On Tue, 8 Jan 2008, liu york wrote: >> >>> I want to restrict invite when regiest unsuccessful even the invite >>> request have right authentication. actually,i just want to only one >>> person can call to pstn,others cant call even have sipid and >>> password.now i has set by modparam("registrar", "max_contacts", 10).but >>> cant restrict the invite by the sipphone no need regiestion. >> >> Are you authenticating INVITEs differently than you are authenticating >> registrations? In other words, are the authentication realm and required >> credentials different for your proxy_challenge() than they are for >> your www_challenge() for handling REGISTER requests? >> >> If they are, it seems that all you should have to do is do a lookup() >> and see if it fails. Presumably, you are doing a save() into your >> registrar/usrloc only on valid REGISTER challenges? >> >> >> i.e. >> >> if(is_method("INVITE")) { >> if(!lookup("location")) { > > if(!registered("location")) { >is sufficient > >btw: this does not give you any security > >regards >klaus > > >> sl_send_reply("403", "Forbidden -- REGISTER invalid."); >> exit; >> } >> } >> >> >> -- >> Alex Balashov >> Evariste Systems >> Web : http://www.evaristesys.com/ >> Tel : +1-678-954-0670 >> Direct : +1-678-954-0671 >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.openser.org >> http://lists.openser.org/cgi-bin/mailman/listinfo/users = = = = = = = = = = = = = = = = = = = = 　　　　　　　　致礼！　　　　　　　　york 　　　　　　　　york(a)goldentek.biz 　　　　　　　　　　2008-01-08

1 0

[OpenSER-Users] how to restrict invite when regiest unsuccessful
by liu york 08 Jan '08

08 Jan '08

hi I want to restrict invite when regiest unsuccessful even the invite request have right authentication. actually,i just want to only one person can call to pstn,others cant call even have sipid and password.now i has set by modparam("registrar", "max_contacts", 10).but cant restrict the invite by the sipphone no need regiestion. so plz help,many thx.

3 3

[OpenSER-Users] presence(XCAP) permission rules?
by KevinKinnan 07 Jan '08

07 Jan '08

According to the instruction(README) of 'presence_xml', if using a integrated xcap server like OpenXCAP, the value of 'force_active' should set to 0. Then, the xcap server is queried and the subscription states is according to user defined permission rules. If no rules are defined for a certain watcher, the subscriptions remains in pending state and the Notify sent will have no body. Is the 'user defined permission rules' mentioned above specified in RFC 5025(Presence Authorization Rules) or 'XCAP usage for setting presence authorization'? They seems different. I have tried both of them and stored xml in xcap table for a user, say alice(she allows bob to wather her pre-info). But it was not working, subscription state was still 'pending'. Thank you! Regards, Kevin _________________________________________________________________ MSN圣诞礼物火热登场，免费发放中，快来领取吧！ http://im.live.cn/emoticons/?ID=18

1 0

[OpenSER-Users] XCAP permission rules?
by KevinKinnan 07 Jan '08

07 Jan '08

My OpenSER works with openxcap, force_active is set to 0. The Subscription query the "xcap" table for permission rules of specified watcher. I create a simple xml rule which is shown below, and store it in xcap table. But the subscription-state is still "pending". I found another presence authorization rules that uses different statments like <provide-services> or <transformations>. which one should I use? Thank you! <?xml version="1.0" encoding="UTF-8"?> <permission-statements> <statement id="as8f"> <applies-to> <domain>open-ims.test</domain> </applies-to> <permissions> <accept/> </permissions> </statement> </permission-statements>Regards, Lei _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

[OpenSER-Users] new CDRTool release 6.1.0
by Adrian Georgescu 07 Jan '08

07 Jan '08

The software can be downloaded from: http://download.dns-hosting.info/CDRTool/ Changelog since 5.1.1: cdrtool (6.1.0) unstable; urgency=low * Fixed update of billing_rates entries from csv files * Overwrite defaults from sip_settings class per NGNPro connection * Added contrib directory * Added freeradius patch for freeradius cvs version from Norm Brandinger * Log progress of importing rating files * Show rating engine daemon uptime in syslog * Many fixes in provisioning client * Lookup customers and rates in MySQL, there is no memory limit anymore * Importing rating does not lock the rating engine anymore * Fixed billing of calls over the minimum duration cdrtool (6.0) unstable; urgency=low * Fixed links from Group-by output to discrete CDRs * After renormalization, re-cache the monthly usage only for the accounts that had CDRs changed during renormalization * Fixed application type for rating engine (default application is audio) * Added info to ENUM generator * Fixed node IP parsing in sip trace * Fixed default login account creation * Don't log ENUM tld in rate info if is set to none * Added RatingProfiles management in sip settings page * Added prepaid_cards management in Rating tables page * Fixed name of domain table when SIP Thor data-source is enabled * Added link in the trace window to jump to a different SIP Proxy * Import/export delimiter for rating tables can be adjusted, default is , * Must apply database structure changes from setup/mysql/ alter_tables.mysql * NGNPro client completed * Save settings before existing provisioning pages cdrtool (5.3.3) unstable; urgency=low * Fixed ENUM tld match and logging * Show visual ENUM usage * Provisioning engine update cdrtool (5.3.2) unstable; urgency=low * Fixed memory leak cdrtool (5.3.1) unstable; urgency=low * Removed reference to soapFilter which was unused * Skip ENUM tld 'none' in discounts * Update presence functions in provisioning client * Fixed initalization of gatewaygroups * Add function for showing customer text box * Allow specification of custom port names and classes per reseller * Fixed phplib typo that caused crash on php5 cdrtool (5.3.0) unstable; urgency=low * Added ENUM tld based discounts in the rating engine * Added ENUM tld management in the Rating page * Renamed field radius.Framed-Protocol to radius.ENUMtld to accomodate discounts based on ENUM top level domain. This functionality requires changes to the database structures and reconfigure several components: See doc/Upgrade.txt and setup/mysql/alter_tables.mysql for more information * Removed unused SOAP directory * Added NGNPro client provisioning library * Added sip settings page * Added new rights for provisioning tasks * Change main menu item names cdrtool (5.2.6) unstable; urgency=low * Log in syslog the duration of reloading of the rating tables and of the sip accounts into memcacche cdrtool (5.2.5) unstable; urgency=low * Replaced multiple SOAP definitions from global.inc with a pointer to an entry from the $soapEngines defined in soap_engines.inc * Fixed read of HTTP vars in sip trace, public traces are now visible when global vars are turned off cdrtool (5.2.4) unstable; urgency=low * Skip billing_rates.trafficRate absent from csv import * Update rating documentation * Added link to FreeRADIUS-CDRTool by Dan-Cristian Bogos * Fixed sip trace purging * Fix for virtualhost allowing .htaccess customization for cdrtool cdrtool (5.2.3) unstable; urgency=low * Allow usernames without domain part in quota check * Added publish of SIP domain statistics using SIP SIMPLE cdrtool (5.2.2) unstable; urgency=low * Added SIP trace for SIP Thor datasource cdrtool (5.2.1) unstable; urgency=low * Synced UPDATE queries for current and older month (in SQL stored procedures) (you must apply changes from setup/mysql/alter_tables.mysql) cdrtool (5.2.0) unstable; urgency=low * Eliminate the race condition that appears when normalization process is performed between the time radius database is updated when a BYE arrives and the MediaProxy updates the same radius record. cdrtool (5.1.9) unstable; urgency=low * Removed print of sql query cdrtool (5.1.8) unstable; urgency=low * Fixed saving the agreement with license page cdrtool (5.1.7) unstable; urgency=low * Added SOAP/XML management for LCR * Save when the user agrees with the usage license to avoid display the license agreement at each login cdrtool (5.1.6) unstable; urgency=low * Fixed calculus of historical rates when rate is found in alternative profile cdrtool (5.1.5) unstable; urgency=low * Hide price when grouping results for login accounts without showPrice right cdrtool (5.1.4) unstable; urgency=low * Fixed a typo in cdrlib.phtml cdrtool (5.1.3) unstable; urgency=low * Fixed pagination of exported records cdrtool (5.1.2) unstable; urgency=low * Show status of multiple mysql clusters Must migrate global.inc setting $CDRTool['replicated_databases'] to $CDRTool['mysql_clusters'] See setup/global.inc.in for example Regards, Adrian

1 0

[Serusers] SEMS- unix socket problem
by dim 06 Jan '08

06 Jan '08

hi everybody, You can see attached my conf files for ser, ser-sems and sems. I run two instances of ser : 1. the first on port 5060 2. the second which is the sip stack for sems, on 5070 My conf files show that when for example i call 101 or 102 , the call is directed to sems, but the debug of my 2nd ser shows this : 2(8658) write_to_unixsock: Error in connect: Connection refused 2(8658) ERROR:tm:t_write_unix: write_to_unixsock failed 2(8658) write_to_unixsock: Error in connect: Connection refused 2(8658) ERROR:tm:t_write_unix: write_to_unixsock failed Probably these is some kind of problem with my unix socket configuration in my conf files... can anyone help me ??

1 0

[OpenSER-Users] Run on multiple ports
by Arun Kumar 05 Jan '08

05 Jan '08

Hi, how do I run ser/openser on multiple ports. ? I've configured my ser with two listen stat. listen = ip:5060 listen = ip:5070 UA:5070 -------> Cisco (Blocked 5060) --------> SER -------------> UB:5060 UA is able to call UB, but UB is not able to call UA, I know 5060 is blocked but it should goto 5070 ? please guide on this ? Thanks, Arun

4 5

Re: [OpenSER-Users] newbie help - handeling 302s and 404s
by Jesus Rodriguez 05 Jan '08

05 Jan '08

Hi Lazer, >i need a simple config that achieves the following (w/ out a db) > >if a user is not registered then all calls should go to a default gw >192.168.10.1 > >the default gw will only respond w/ a 302 or a 404 > >if a 302 is received then openser should forward the call on to the >new gw listed in the reply > >if a 404 is received the call should be forwarded to a different gw 172.16.20.1 > >if the send gw is done then the call should die. Try with somehting like this (not tested): if (!lookup("location")) { route(5); exit; } route[5] { rewritehostport("192.168.10.1:5060"); t_on_failure("1"); route(1); exit; } route[1] { if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { if (t_check_status("404")) { rewritehostport("172.16.20.1:5060"); append_branch(); t_relay(); } else { get_redirects("*"); t_relay(); } } Saludos JesusR. >here is what i was thinking of but as a newbie i may be off my rocker >i seem to get an error > > ERROR: t_check_status: cannot check status for a reply which has no >T-state established > >but again my whole approach may be wrong. > > > if (!lookup("location")) { > >rewritehostport ("192.168.10.1:5060"); >if (t_check_status("(404)|(480)")) { > log("404 or 480 negative reply\n"); >rewritehostport ("172.16.20.1:5060"); >} >else{ >t_on_failure("1"); > t_relay(); >} > > > failure_route[1] { > > get_redirects("*"); > t_relay(); >} > } Saludos JesusR. ------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr(a)voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------

3 4

[OpenSER-Users] Problem with "uac_replace_from()" and Linksys PAP: "vsf" parameter in Record-Route
by Iñaki Baz Castillo 05 Jan '08

05 Jan '08

Hi, I use "uac_replace_from" with: modparam("uac","from_restore_mode","auto") modparam("uac","rr_store_param","vsf") So when a call arrives and must be sent to an Asterisk voicemail server I change the From: Linksys PAP -> OpenSer INVITE sip:*500@openser.ilimit.es SIP/2.0 Via: SIP/2.0/UDP 192.168.1.109:5061;branch=z9hG4bK-91c6d79a From: PAP809 <sip:809@openser.ilimit.es>;tag=bd9af3255e5ce6ao1 To: <sip:*500@openser.ilimit.es> Call-ID: 148834d2-a640054a(a)192.168.1.109 OpenSer -> Asterisk INVITE sip:*500@80.94.0.111 SIP/2.0 Record-Route: <sip:80.94.0.110;lr=on;ftag=bd9af3255e5ce6ao1;vsf=AAAAAAAAAB8AAAAAAAAAAAAAAAAAAAAAAEBvcGVuc2VyLmlsaW1pdC5lcw--> Via: SIP/2.0/UDP 80.94.0.110;branch=z9hG4bKb114.2e2e6ca5.0 Via: SIP/2.0/UDP 192.168.1.109:5061;rport=5061;received=212.121.235.18;branch=z9hG4bK-91c6d79a From: PAP809 <sip:809_openser.ilimit.es@openser.ilimit.es>;tag=bd9af3255e5ce6ao1 To: <sip:*500@openser.ilimit.es> Call-ID: 148834d2-a640054a(a)192.168.1.109 Asterisk -> OpenSer SIP/2.0 200 OK Via: SIP/2.0/UDP 80.94.0.110;branch=z9hG4bKb114.2e2e6ca5.0;received=80.94.0.110 Via: SIP/2.0/UDP 192.168.1.109:5061;rport=5061;received=212.121.235.18;branch=z9hG4bK-91c6d79a Record-Route: <sip:80.94.0.110;lr=on;ftag=bd9af3255e5ce6ao1;vsf=AAAAAAAAAB8AAAAAAAAAAAAAAAAAAAAAAEBvcGVuc2VyLmlsaW1pdC5lcw--> From: PAP809 <sip:809_openser.ilimit.es@openser.ilimit.es>;tag=bd9af3255e5ce6ao1 To: <sip:*500@openser.ilimit.es>;tag=as32a464eb Call-ID: 148834d2-a640054a(a)192.168.1.109 OpenSer -> Linksys PAP SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.1.109:5061;rport=5061;received=212.121.235.18;branch=z9hG4bK-91c6d79a Record-Route: <sip:80.94.0.110;lr=on;ftag=bd9af3255e5ce6ao1;vsf=AAAAAAAAAB8AAAAAAAAAAAAAAAAAAAAAAEBvcGVuc2VyLmlsaW1pdC5lcw--> From: PAP809 <sip:809@openser.ilimit.es>;tag=bd9af3255e5ce6ao1 To: <sip:*500@openser.ilimit.es>;tag=as32a464eb Call-ID: 148834d2-a640054a(a)192.168.1.109 The problem is that this "200 OK" from OpenSer to Linksys PAP is not recognized by Linksys PAP who doesn't reply with an ACK (just ignores the "200 OK"), so the "200 OK" is resent again and again by Asterisk. This issue just occurs with the Linksys PAP: Product Name: PAP2-NA Software Version: 2.0.12(LS) Hardware Version: 0.03.4 There is no NAT problem and if I set: modparam("uac","from_restore_mode","none") then the problem dissapeares, so the problem is the existence of "vsf" parameter in Record-Route. If this parameter doesn't exist the problem doesn't occur. Again I repeat that this issue doesn't occur with others phones. Any idea of why this occurs with Linksys PAP? Thanks for any suggestion. PD: Changing the parameter name does solve nothing. PPD: What about if I don't restore the From in the replies? According to RFC3261 the only important is the matching of From_tag, To_tag and Call-id, so, maybe I just should set: modparam("uac","from_restore_mode","none") and forget this issue? -- Iñaki Baz Castillo ibc(a)in.ilimit.es

3 3

[OpenSER-Users] Digest auth on openwrt without mysql ?
by Michael Bradley Jr 04 Jan '08

04 Jan '08

Hi, is it possible to run openser with digest auth on an openwrt router *without* mysql? If yes can someone please provide me a hint/link? Did try loading "/usr/lib/openser/module/auth.so" without great success, since my box lacks a mysql server version! Thanks in advance Michaek

4 3

[OpenSER-Users] # characters in URIs getting reformatted.
by Alex Balashov 04 Jan '08

04 Jan '08

I am using OpenSER to front some Cisco AS5300s. The way the trunk groups on those are set up, a prefix of #755 is required to dial out, so I transform the URI in OpenSER: $rU = "#755" + $rU; The problem is, certain messages never get acknowledged because OpenSER reformats the URI to use escaped sequences. I am not sure if this is RFC compliant. For instance, a 200 OK comes from the media gateway, and the ACK that OpenSER sends back has this for the URI scheme: ACK sip:%237557069999999@ip.address:5060 This is in response to an initial INVITE to: sip:#7557069999999@ip.address:5060 ... what should I make of this? Thanks! -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

4 5

Re: [OpenSER-Users] Digest auth on openwrt without mysql ?
by Henning Westerholt 04 Jan '08

04 Jan '08

On Friday 04 January 2008, Michael Bradley Jr wrote: > Hi Henning, > > I'm running openser on an openwrt (whiterussion 0.9) box and I'm quite new > to openser. > I did install openser and would like to quickly add a domain and some users > that could digest auth on my box. > I know RTFM but can you tell me the direction to go for this quick setup? Hi, look at http://www.openser.org/docs/modules/1.3.x/ for the modules docs. Basically you need to load a database driver of your choice and the db_auth module. Take a look at the docs for this module for the available functions for authentification, in the example config there are also some hints. I don't have experience with OpenSER on the openWRT, unfortunally, so i don't can give you more detailed hints about this special setup. You need to specify your database type in the /etc/openser/openserctlrc file, and then you could use the openserdbctl tool to create a new database. After that you could add a new user with the openserctl tool, and authentification should work. It it don't, increase the debug level to get some hints about the problems. Run this tools without any command to get some help, there is also some documentation about the installation on the wiki. Hope this helps - cheers, Henning

1 0

[OpenSER-Users] Fetching multiple rows from DB.
by Alex Balashov 04 Jan '08

04 Jan '08

So, is there a legitimate way to retrieve multiple rows using avp_db_query() and iterate through them with a loop structure? Does AVP support the notion of an "array" construction? And if not, how do I get OpenSER to apply a set of rules codified in custom database structures? -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

3 2

[OpenSER-Users] UAC stops responding to opensers 401 unauthorized challenge after few hours
by Raju Abhyankar 03 Jan '08

03 Jan '08

I need some help and guidance here as I am fairly new to openser but have made some progress.... Can some one throw some light on this issue. I am using a standard openser script from sipwise.com. I have several ATA or UAC registered with openser-1.1.1-tls. THe registration process works just fine. I can make calls etc. no issues. I am using Mediaproxy for nat traversal and no issues there too. Since I am using the internet (not private LAN) to connect these devices, I have set my register expiration time to 1200 seconds. Now after a few hours of operation, I see that some of the ATA or UAC (HT486) deregister. I have used "ngrep" and I can see: 1. UAC sends REGISTER request 2. openser responds by saying "100" "Trying" 2. Openser generates a 401 unauthorized 3. UAC once again generates REGISTER request and this goes on. The only way to correct this issue is to reboot the ATA by powering it off and on. Any ideas why this may happen? When I run the same devices using Asterisk I dont see the devices deregister but I would like to use Asterisk only a PSTN gateway. I have included a trace of this below Thanks in advance Raju ==================================================== From: <sip:88@lmnopq.com>;tag=ed8cb29199123c47. To: <sip:88@lmnopq.com>. Contact: <sip:88@YY.YYY.YYY.YY:50826>. Supported: replaces, timer. Call-ID: a679dcef0eebdbec(a)192.168.1.5. CSeq: 100 REGISTER. Expires: 60. User-Agent: TigerNetCom 1.02.12.0.9.11. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE. Content-Length: 0. . U 2008/01/03 13:42:29.518524 XXX.XX.XXX.XXX:5060 -> YY.YYY.YYY.YY:50825 SIP/2.0 100 Trying. Via: SIP/2.0/UDP YY.YYY.YYY.YY:50826;branch=z9hG4bK0826bc66f89e21de;rport=50825. From: <sip:88@lmnopq.com>;tag=ed8cb29199123c47. To: <sip:88@lmnopq.com>. Call-ID: a679dcef0eebdbec(a)192.168.1.5. CSeq: 100 REGISTER. Server: OpenSer (1.1.1-tls (i386/linux)). Content-Length: 0. . U 2008/01/03 13:42:29.518566 XXX.XX.XXX.XXX:5060 -> YY.YYY.YYY.YY:50825 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP YY.YYY.YYY.YY:50826;branch=z9hG4bK0826bc66f89e21de;rport=50825. From: <sip:88@lmnopq.com>;tag=ed8cb29199123c47. To:<sip:88@lmnopq.com>;tag=5cc123387d097550f225581b658b043b.4f69. Call-ID: a679dcef0eebdbec(a)192.168.1.5. CSeq: 100 REGISTER. WWW-Authenticate: Digest realm="lmnopq.com", nonce="477d57f148e6dc9dd21502b6c60d4bfe9d061657". Server: OpenSer (1.1.1-tls (i386/linux)). Content-Length: 0. After this the register with same cseq shows up and the device does not register....

1 0

[Serusers] SER fails to match ACK to previous INVITE
by Srinivas Kotamarti 03 Jan '08

03 Jan '08

Hi, I have recently downloaded SER & SEMS and configured them for early_announce application as described in the early_announce module documentation. I am using SIPp to generate an incoming call to test the setup. Upon receiving ACK for some reason SER fails to match it to the previous INVITE and tries to forward it to the destination statelessly and picks it up again and forwards it. It continues to do this until the max forward limit is reached. I cannot figure out what is wrong. Any help is really appreciated. Here is the Route section from ser-sems.cfg file that I am using # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { # filter unsupported requests if (!(method=="REGISTER" || method=="ACK" || method=="INVITE" || method=="BYE" || method=="CANCEL" )) { sl_send_reply("501", "method not understood here"); break; } if (method=="REGISTER") { # make UAs which want to register unhappy sl_send_reply("501","registration couldn't be accepted"); break; }; if (!t_newtran()){ sl_send_reply("500","could not create transaction"); break; }; if (method == "INVITE") { avp_write("Final-Reply-Code=405;Final-Reply-Reason=Prohiboted", "$sess_params"); if(!t_write_unix("/tmp/sems_sock","early_announce/early_headers")){ log("could not contact early_announce\n"); t_reply("404","not found"); }; break; } else if (method=="BYE" || method=="CANCEL") { if(!t_write_unix("/tmp/sems_sock","bye")) { t_reply("500","error contacting sems"); }; break; } else if (method=="ACK"){ # absorb ACKs t_relay(); break; }; break; } if (!t_relay()) { sl_reply_error(); }; } Debug logs from SER 0(27347) SIP Request: 0(27347) method: <ACK> 0(27347) uri: <sip:service@10.107.2.246> 0(27347) version: <SIP/2.0> 0(27347) parse_headers: flags=1 0(27347) Found param type 232, <branch> = <0>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=1 0(27347) parse_headers: this is the first via 0(27347) After parse_msg... 0(27347) preparing to run routing scripts... 0(27347) DEBUG : sl_filter_ACK: to late to be a local ACK! 0(27347) parse_headers: flags=128 0(27347) Found param type 232, <branch> = <0>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=128 0(27347) parse_headers: this is the second via 0(27347) Found param type 232, <branch> = <z9hG4bK-27351-1-3>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=128 0(27347) DEBUG: add_param: tag=79EBE47B-477CE4230002578E-B7F6D6C0 0(27347) end of header reached, state=29 0(27347) DEBUG: get_hdr_field: <To> [76]; uri=[sip:service@10.107.2.246:5060]<mailto:[sip:service@10.107.2.246:5060]> 0(27347) DEBUG: to body [sut <sip:service@10.107.2.246:5060>] 0(27347) get_hdr_field: cseq <CSeq>: <1> <ACK> 0(27347) DEBUG:maxfwd:is_maxfwd_present: value = 15 0(27347) DEBUG: add_param: tag=27351SIPpTag001 0(27347) end of header reached, state=29 0(27347) parse_headers: flags=256 0(27347) DEBUG: get_hdr_body : content_length=0 0(27347) found end of header 0(27347) find_first_route: No Route headers found 0(27347) loose_route: There is no Route HF 0(27347) grep_sock_info - checking if host==us: 12==12 && [10.107.2.246] == [10.107.2.246] 0(27347) grep_sock_info - checking if port 5060 matches port 5060 0(27347) DEBUG: t_newtran: msg id=4 , global msg id=3 , T on entrance=(nil) 0(27347) parse_headers: flags=-1 0(27347) parse_headers: flags=60 0(27347) t_lookup_request: start searching: hash=30348, isACK=1 0(27347) DEBUG: proceeding to pre-RFC3261 transaction matching 0(27347) DEBUG: t_lookup_request: no transaction found 0(27347) DEBUG: t_newtran: msg id=4 , global msg id=4 , T on entrance=(nil) 0(27347) parse_headers: flags=-1 0(27347) parse_headers: flags=60 0(27347) t_lookup_request: start searching: hash=30348, isACK=1 0(27347) DEBUG: proceeding to pre-RFC3261 transaction matching 0(27347) DEBUG: t_lookup_request: no transaction found 0(27347) SER: forwarding ACK statelessly 0(27347) DEBUG: mk_proxy: doing DNS lookup... 0(27347) check_via_address(10.107.2.246, 10.107.2.246, 0) 0(27347) Sending: ACK sip:service@10.107.2.246 SIP/2.0 Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246:5061;branch=z9hG4bK-27351-1-3 From: sipp <sip:sipp@10.107.2.246:5061>;tag=27351SIPpTag001 To: sut <sip:service@10.107.2.246:5060>;tag=79EBE47B-477CE4230002578E-B7F6D6C0 Call-ID: 1-27351(a)10.107.2.246<mailto:1-27351@10.107.2.246> CSeq: 1 ACK Contact: sip:sipp@10.107.2.246:5061 Max-Forwards: 14 Subject: Performance Test Content-Length: 0 --Srinivas Kotamarti

1 0

[Serusers] SER fails to match ACK to previous INVITE
by Srinivas Kotamarti 03 Jan '08

03 Jan '08

Hi, I have recently downloaded SER & SEMS and configured them for early_announce application as described in the early_announce module documentation. I am using SIPp to generate an incoming call to test the setup. Upon receiving ACK for some reason SER fails to match it to the previous INVITE and tries to forward it to the destination statelessly and picks it up again and forwards it. It continues to do this until the max forward limit is reached. I cannot figure out what is wrong. Any help is really appreciated. Here is the Route section from ser-sems.cfg file that I am using # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { # filter unsupported requests if (!(method=="REGISTER" || method=="ACK" || method=="INVITE" || method=="BYE" || method=="CANCEL" )) { sl_send_reply("501", "method not understood here"); break; } if (method=="REGISTER") { # make UAs which want to register unhappy sl_send_reply("501","registration couldn't be accepted"); break; }; if (!t_newtran()){ sl_send_reply("500","could not create transaction"); break; }; if (method == "INVITE") { avp_write("Final-Reply-Code=405;Final-Reply-Reason=Prohiboted", "$sess_params"); if(!t_write_unix("/tmp/sems_sock","early_announce/early_headers")){ log("could not contact early_announce\n"); t_reply("404","not found"); }; break; } else if (method=="BYE" || method=="CANCEL") { if(!t_write_unix("/tmp/sems_sock","bye")) { t_reply("500","error contacting sems"); }; break; } else if (method=="ACK"){ # absorb ACKs t_relay(); break; }; break; } if (!t_relay()) { sl_reply_error(); }; } Debug logs from SER 0(27347) SIP Request: 0(27347) method: <ACK> 0(27347) uri: <sip:service@10.107.2.246> 0(27347) version: <SIP/2.0> 0(27347) parse_headers: flags=1 0(27347) Found param type 232, <branch> = <0>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=1 0(27347) parse_headers: this is the first via 0(27347) After parse_msg... 0(27347) preparing to run routing scripts... 0(27347) DEBUG : sl_filter_ACK: to late to be a local ACK! 0(27347) parse_headers: flags=128 0(27347) Found param type 232, <branch> = <0>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=128 0(27347) parse_headers: this is the second via 0(27347) Found param type 232, <branch> = <z9hG4bK-27351-1-3>; state=16 0(27347) end of header reached, state=5 0(27347) parse_headers: Via found, flags=128 0(27347) DEBUG: add_param: tag=79EBE47B-477CE4230002578E-B7F6D6C0 0(27347) end of header reached, state=29 0(27347) DEBUG: get_hdr_field: <To> [76]; uri=[sip:service@10.107.2.246:5060]<mailto:[sip:service@10.107.2.246:5060]> 0(27347) DEBUG: to body [sut <sip:service@10.107.2.246:5060>] 0(27347) get_hdr_field: cseq <CSeq>: <1> <ACK> 0(27347) DEBUG:maxfwd:is_maxfwd_present: value = 15 0(27347) DEBUG: add_param: tag=27351SIPpTag001 0(27347) end of header reached, state=29 0(27347) parse_headers: flags=256 0(27347) DEBUG: get_hdr_body : content_length=0 0(27347) found end of header 0(27347) find_first_route: No Route headers found 0(27347) loose_route: There is no Route HF 0(27347) grep_sock_info - checking if host==us: 12==12 && [10.107.2.246] == [10.107.2.246] 0(27347) grep_sock_info - checking if port 5060 matches port 5060 0(27347) DEBUG: t_newtran: msg id=4 , global msg id=3 , T on entrance=(nil) 0(27347) parse_headers: flags=-1 0(27347) parse_headers: flags=60 0(27347) t_lookup_request: start searching: hash=30348, isACK=1 0(27347) DEBUG: proceeding to pre-RFC3261 transaction matching 0(27347) DEBUG: t_lookup_request: no transaction found 0(27347) DEBUG: t_newtran: msg id=4 , global msg id=4 , T on entrance=(nil) 0(27347) parse_headers: flags=-1 0(27347) parse_headers: flags=60 0(27347) t_lookup_request: start searching: hash=30348, isACK=1 0(27347) DEBUG: proceeding to pre-RFC3261 transaction matching 0(27347) DEBUG: t_lookup_request: no transaction found 0(27347) SER: forwarding ACK statelessly 0(27347) DEBUG: mk_proxy: doing DNS lookup... 0(27347) check_via_address(10.107.2.246, 10.107.2.246, 0) 0(27347) Sending: ACK sip:service@10.107.2.246 SIP/2.0 Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Record-Route: <sip:10.107.2.246;ftag=27351SIPpTag001;lr=on> Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246;branch=0 Via: SIP/2.0/UDP 10.107.2.246:5061;branch=z9hG4bK-27351-1-3 From: sipp <sip:sipp@10.107.2.246:5061>;tag=27351SIPpTag001 To: sut <sip:service@10.107.2.246:5060>;tag=79EBE47B-477CE4230002578E-B7F6D6C0 Call-ID: 1-27351(a)10.107.2.246<mailto:1-27351@10.107.2.246> CSeq: 1 ACK Contact: sip:sipp@10.107.2.246:5061 Max-Forwards: 14 Subject: Performance Test Content-Length: 0 --Srinivas Kotamarti

1 0

[OpenSER-Users] Daily Snapshots for 1.3.x release
by Anatoly Pidruchny 03 Jan '08

03 Jan '08

Hello, Is it planned to add daily snapshats for the 1.3.x release? They are missing here: http://www.openser.org/downloads/snapshots/ Thanks, /Anatoly.

1 0

[Serusers] Unix Socket Problem
by frq ser 03 Jan '08

03 Jan '08

Hi, Thanks for your reply Stefan. Here is the log from SEMS 0.10.0, which I just installed. This log is in two parts. The first one (with a few lines missing from the top) is displayed when sems is started. The second part is displayed when I send the INVITE message. Thanks again for your help. Frq. SEMS-0.10.0 log (Part 1) . . . /usr/local/lib/sems/plug-in': (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/stat s.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'stats' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/anno uncement.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'announcement' load ed. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/wav. so ... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 1 inserted (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 2 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'PCMU' inserted with id 0 and order 100 (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'PCMA' inserted with id 8 and order 108 (24406) DEBUG: addFileFormat (AmPlugIn.cpp:610): file format Wav inserted (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/ilbc .so ... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 4 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'iLBC' inserted with id 97 and order 197 (24406) DEBUG: addFileFormat (AmPlugIn.cpp:610): file format iLBC inserted (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/webc onference.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'webconference' loa ded. (24406) DEBUG: loadDiPlugIn (AmPlugIn.cpp:479): component 'webconference' loaded . (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/ann_ b2b.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'ann_b2b' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/sess ion_timer.so ... (24406) DEBUG: loadSehPlugIn (AmPlugIn.cpp:457): session component 'session_time r' loaded. (24406) DEBUG: loadDiPlugIn (AmPlugIn.cpp:479): component 'user_timer' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/uac_ auth.so ... (24406) DEBUG: loadSehPlugIn (AmPlugIn.cpp:457): session component 'uac_auth' lo aded. (24406) DEBUG: loadDiPlugIn (AmPlugIn.cpp:479): component 'uac_auth' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/echo .so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'echo' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/earl y_announce.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'early_announce' lo aded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/reg_ agent.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'reg_agent' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/regi strar_client.so ... (24406) DEBUG: loadDiPlugIn (AmPlugIn.cpp:479): component 'registrar_client' loa ded. (24406) DEBUG: loadSIPehPlugIn (AmPlugIn.cpp:502): sip event handler component ' registrar_client' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/voic email.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'voicemail' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/conf erence.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'conference' loaded . (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/ivr. so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'ivr' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/gsm. so ... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 3 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'GSM' inserted with id 3 a nd order 103 (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/anno unce_transfer.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'announce_transfer' loaded. (24406) DEBUG: load (AmPlugIn.cpp:172): AmPlugIn: modules loaded. (24406) DEBUG: load (AmPlugIn.cpp:174): AmPlugIn: Initializing plugins... (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'first_parti cipant' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'join_sound' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'drop_sound' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'enter_pin' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'wrong_pin' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'entering_co nference' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '0' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '1' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '2' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '3' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '4' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '5' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '6' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '7' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '8' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '9' to promp t collection. (24406) DEBUG: onLoad (WebConference.cpp:104): Using adaptive playout buffer as playout technique. (24406) DEBUG: onLoad (WebConference.cpp:127): Webconference will strip 5 leadin g characters from direct room access usernames (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/ sems_rsp_sock (24406) DEBUG: onLoad (AnnounceB2B.cpp:66): AnnounceFile = default_en.wav (24406) DEBUG: onLoad (Conference.cpp:258): Using adaptive playout buffer as pla yout technique. (24406) DEBUG: onLoad (Echo.cpp:52): session_timer_f == 0x0000000009500490 (24406) DEBUG: add_env_path (AmUtils.cpp:891): setting PYTHONPATH to: '/usr/loca l/lib/sems/plug-in' (24406) DEBUG: Ivr-Python: Python-Ivr logging started (24406) DEBUG: onLoad (Ivr.cpp:469): ** IVR compile time configuration: (24406) DEBUG: onLoad (Ivr.cpp:470): ** built with PYTHON support. (24406) DEBUG: onLoad (Ivr.cpp:475): ** Text-To-Speech disabled (24406) DEBUG: onLoad (Ivr.cpp:478): ** IVR run time configuration: (24406) DEBUG: onLoad (Ivr.cpp:479): ** script path: '/usr/local/lib /sems/ivr/' (24406) DEBUG: onLoad (Ivr.cpp:495): directory '/usr/local/lib/sems/ivr/' opened (24406) DEBUG: _start (AmThread.cpp:68): Thread 3083512736 is starting. (24406) DEBUG: run (SIPRegistrarClient.cpp:190): SIPRegistrarClient starting... (24406) DEBUG: _start (AmThread.cpp:68): Thread 3084868512 is starting. (24406) DEBUG: _start (AmThread.cpp:68): Thread 3083512736 is starting. (24406) DEBUG: run (SIPRegistrarClient.cpp:190): SIPRegistrarClient starting... (24406) INFO: onLoad (Ivr.cpp:522): Application script registered: conf_auth. (24406) INFO: onLoad (Ivr.cpp:522): Application script registered: mailbox. (24406) INFO: onLoad (Ivr.cpp:522): Application script registered: mailbox_query . (24406) INFO: onLoad (Ivr.cpp:522): Application script registered: pin_collect. (24406) ERROR: onLoad (RegistrationAgent.cpp:69): Account for registration not c orrectly configured. (24406) ERROR: onLoad (RegistrationAgent.cpp:70): RegistrationAgent will not reg ister any accounts. (24406) DEBUG: init (StatsUDPServer.cpp:144): udp_port = 5040 (24406) DEBUG: init (StatsUDPServer.cpp:186): socket bound at port 5040 (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: loadEmailTemplates (AnswerMachine.cpp:298): loading /usr/local/et c/sems//default.template ... (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'first_parti cipant' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'join_sound' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'drop_sound' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'enter_pin' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'wrong_pin' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt 'entering_co nference' to prompt collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '0' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '1' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '2' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '3' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '4' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '5' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '6' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '7' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '8' to promp t collection. (24406) DEBUG: setPrompt (AmPromptCollection.cpp:81): adding prompt '9' to promp t collection. (24406) DEBUG: onLoad (WebConference.cpp:104): Using adaptive playout buffer as playout technique. (24406) DEBUG: onLoad (WebConference.cpp:127): Webconference will strip 5 leadin g characters from direct room access usernames (24406) DEBUG: load (AmPlugIn.cpp:221): AmPlugIn: Initialized plugins. (24406) DEBUG: main (sems.cpp:377): Starting session container (24406) DEBUG: _start (AmThread.cpp:68): Thread 3078294432 is starting. (24406) DEBUG: _start (AmThread.cpp:68): Thread 3078294432 is starting. (24406) DEBUG: _start (AmThread.cpp:68): Thread 3076889504 is starting. (24406) DEBUG: start (AmThread.cpp:135): Thread 3076889504 is just created. (24406) DEBUG: main (sems.cpp:380): Starting media processor (24406) DEBUG: init (AmMediaProcessor.cpp:61): Starting 1 MediaProcessorThreads. (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: main (sems.cpp:383): Starting mailer (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: main (sems.cpp:386): Starting RTP receiver (24406) DEBUG: start (AmThread.cpp:135): Thread 0 is just created. (24406) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/ sems_sock (24406) DEBUG: _start (AmThread.cpp:68): Thread 3075836832 is starting. (24406) DEBUG: _start (AmThread.cpp:68): Thread 3074784160 is starting. (24406) DEBUG: _start (AmThread.cpp:68): Thread 3073731488 is starting. Ser's unix socket: /tmp/ser_sock our unix socket: /tmp/sems_sock reply unix socket: /tmp/sems_rsp_sock plug-in path: /usr/local/lib/sems/plug-in daemon mode: 0 local IP: 192.168.3.208 default application: <not set> (24406) DEBUG: main (sems.cpp:371): Loading plug-ins (24406) DEBUG: AmPlugIn (AmPlugIn.cpp:102): adding built-in codecs... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 0 inserted (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 6 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'telephone-event' inserted with id 96 and order 196 (24406) DEBUG: load (AmPlugIn.cpp:136): AmPlugIn: loading modules in directory ' /usr/local/lib/sems/plug-in': (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/stat s.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'stats' loaded. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/anno uncement.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'announcement' load ed. (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/wav. so ... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 1 inserted (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 2 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'PCMU' inserted with id 0 and order 100 (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'PCMA' inserted with id 8 and order 108 (24406) DEBUG: addFileFormat (AmPlugIn.cpp:610): file format Wav inserted (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/ilbc .so ... (24406) DEBUG: addCodec (AmPlugIn.cpp:540): codec id 4 inserted (24406) DEBUG: addPayload (AmPlugIn.cpp:572): payload 'iLBC' inserted with id 97 and order 197 (24406) DEBUG: addFileFormat (AmPlugIn.cpp:610): file format iLBC inserted (24406) DEBUG: load (AmPlugIn.cpp:146): loading /usr/local/lib/sems/plug-in/webc onference.so ... (24406) DEBUG: loadAppPlugIn (AmPlugIn.cpp:435): application 'webconference' loa --------------------------------------------------------------------------------------- And the second part of the log is this: (24406) DEBUG: run (AmServer.cpp:93): revents = 1 (24406) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <0.3 sip_request.announcement INVITE 200 192.168.3.208 192.168.3.208 5070 sip:200@192.168.3.208:5070 sip:rsf@192.168.3.77 sip:rsf@192.168.3.77 sip:200@192.168.3.208:5070 9787963-3319555348-76751(a)192.168.3.77 100 47668:470495812 <sip:192.168.3.208;lr=on> sip:192.168.3.208;lr=on P-MsgFlags: 0 . > (24406) DEBUG: execute (AmInterfaceHandler.cpp:127): req.method = <INVITE> (24406) DEBUG: execute (AmInterfaceHandler.cpp:128): req.user = <200> (24406) DEBUG: execute (AmInterfaceHandler.cpp:129): req.domain = <192.168.3.208> (24406) DEBUG: execute (AmInterfaceHandler.cpp:130): req.dstip = <192.168.3.208> (24406) DEBUG: execute (AmInterfaceHandler.cpp:131): req.port = <5070> (24406) DEBUG: execute (AmInterfaceHandler.cpp:132): req.r_uri = <sip:200@192.168.3.208:5070> (24406) DEBUG: execute (AmInterfaceHandler.cpp:133): req.from_uri = <sip:rsf@192.168.3.77> (24406) DEBUG: execute (AmInterfaceHandler.cpp:134): req.from = <sip:rsf@192.168.3.77> (24406) DEBUG: execute (AmInterfaceHandler.cpp:135): req.to = <sip:200@192.168.3.208:5070> (24406) DEBUG: execute (AmInterfaceHandler.cpp:136): req.callid = <9787963-3319555348-76751(a)192.168.3.77> (24406) DEBUG: execute (AmInterfaceHandler.cpp:137): req.from_tag = <> (24406) DEBUG: execute (AmInterfaceHandler.cpp:138): req.to_tag = <> (24406) DEBUG: execute (AmInterfaceHandler.cpp:141): cseq_str = <100> (24406) DEBUG: execute (AmInterfaceHandler.cpp:147): cseq = <100>(100) (24406) DEBUG: execute (AmInterfaceHandler.cpp:149): req.key = <47668:470495812> (24406) DEBUG: execute (AmInterfaceHandler.cpp:150): req.route = <<sip:192.168.3.208;lr=on>> (24406) DEBUG: execute (AmInterfaceHandler.cpp:151): req.next_hop = <sip:192.168.3.208;lr=on> (24406) DEBUG: execute (AmInterfaceHandler.cpp:156): hdrs = <P-MsgFlags: 0 > (24406) DEBUG: execute (AmInterfaceHandler.cpp:161): body = <> (24406) ERROR: run (AmServer.cpp:110): AmRequestHandler::execute: mandatory parameter is empty (from|to|callid|from_tag) (24406) DEBUG: run (AmServer.cpp:93): revents = 0 On 1/2/08, Stefan Sayer <stefan.sayer(a)iptego.de> wrote: > Hello, > > > frq ser wrote: > > Hi > > > > I am running the simple configuration in which SER 0.9.7-pre1 serves > > as Proxy (at port 5060) and SER-SEMS is the media server (at port > > 5070). At port 5070, the SER version is 0.9.6-pre1 and SEMS version is > > 0.10.0-rc2. I have placed log commands in the config files just to > > record the process flow. > > > > Using SIPSAK, I am sending an INVITE (for SER-SEMS at :5070) through > > the proxy. My sipsak message is this: > > C:>sipsak -f invite.txt -s sip:200@192.168.3.208:5060 -vvv > > > > The request enters the proxy ser.cfg file and is redirected to the > > SER-SEMS (see the log messages below). The user name (200@...) is used > > by if statement to invoke the announcement application. However, I > > don't see any response from the unix socket (no announcement played) > > nor do I see any error message, and the connection finally times out. > > > > Can anyone please tell me how I can check whether the unix sockets are > > doing their job or not? Why does the process not return any error and > > why does it just time out? > what does the sems log look like if you start sems with -D 3 -E ? does > it run and receive the message? > > thanks > Stefan > > > > > > > Thanks in advance for your help. > > Frq > > > > PS: Here are the (somewhat condensed) versions of SER and SEMS outputs > > (log messages mostly), SIPSAK responses, and the relevant config > > files. I apologise for sending a huge email. > p.s. I would recommend sems 0.10.0 - > ftp://ftp.iptel.org/pub/sems/sems-0.10.0.tar.gz > > -- > Stefan Sayer > VoIP Services > > stefan.sayer(a)iptego.de > www.iptego.de > > iptego GmbH > Am Borsigturm 40 > 13507 Berlin > Germany > > Amtsgericht Charlottenburg, HRB 101010 > Geschaeftsfuehrer: Alexander Hoffmann >

3 4

[OpenSER-Users] Meeting at CCC in Berlin, OSMB in Nuremberg
by Henning Westerholt 03 Jan '08

03 Jan '08

Hello all, i'll do two presentations about OpenSER at the Chaos Communication Congress [1], December 27th-30th, 2007 in Berlin and the Open Source Meets Business congress [2], January 22th–24th, 2008 in Nuremberg. If some people there are interested in a meeting for discussions around OpenSER and other related (or unrelated..) topics, please drop me a private email. Regards, Henning [1] http://events.ccc.de/congress/2007/Main_Page [2] http://www.heise.de/events/2008/open_source_meets_business/en/

3 4

[Serusers] Using SER with Microsoft OCS 2007
by Nolan Garrett 02 Jan '08

02 Jan '08

Hello! I am interested in using SER to convert TCP SIP traffic from OCS to UDP SIP traffic that I can use with an external PSTN gateway provider. Has anyone successfully managed this? Basically, the configuration would look like OCS -> Mediation Server -> SER -> External Provider Would the Mediation Server still need an external (non-NAT'd) IP? It seems like it would, unless I use mediaproxy or RTPproxy, which would add an additional layer of complexity. I guess I am looking for some validation that what I am trying to do will work. My next question, which I can't seem to find an answer to, is how I take the TCP SIP traffic from OCS, convert it to UDP SIP, and also authenticate with that external provider. Any ideas on how to use t_relay_to_udp with authentication? Thank you! Nolan

2 1

Re: [OpenSER-Users] avp_pushto question
by Jeremy George 02 Jan '08

02 Jan '08

Perfect. Thank you. - Jeremy >-----Original Message----- >From: Iñaki Baz Castillo [mailto:ibc@aliax.net] >Sent: Wednesday, January 2, 2008 01:27 PM >To: users(a)lists.openser.org >Subject: Re: [OpenSER-Users] avp_pushto question > >El Miércoles, 2 de Enero de 2008, Jeremy George escribió: >> while($var(idx) < 5) { >> if ($(avp(i:1)[$var(idx)]) != NULL) { >> xlog("L_NOTICE", "avp(i:1)[$var(idx)]=$(avp(i:1)[$var(idx)]) >> avp(i:2)[$var(idx)]=$(avp(i:2)[$var(idx)])\n"); avp_pushto("$ru/username", >> "$(avp(i:2)[$var(idx)])"); >> rewritehostport("10.10.10.10:5060"); >> xlog("L_NOTICE", "$ru\n"); >> } else { >> xlog("L_NOTICE", "avp(i:1)[$var(idx)] == NULL\n"); >> } >> $var(idx) = $var(idx) + 1; >> } >> } else { >> xlog("L_NOTICE", "avp_db_query() returned no records\n"); >> }; > >Forget using avp_pushto, you can do: > > $rU = $(avp(i:2)[$var(idx)]); > >instead of: > > avp_pushto("$ru/username", "$(avp(i:2)[$var(idx)])"); > >-- >Iñaki Baz Castillo > >_______________________________________________ >Users mailing list >Users(a)lists.openser.org >http://lists.openser.org/cgi-bin/mailman/listinfo/users >

1 0

[OpenSER-Users] avp_pushto question
by Jeremy George 02 Jan '08

02 Jan '08

Hello all, I have a small problem with avp_db_query() and avp_pushto() that I could use some help with. The manual select statement returns the expected values: mysql> select username,attribute,value from usr_preferences where username='55555'; +----------+-----------+------------+ | username | attribute | value | +----------+-----------+------------+ | 55555 | 1 | 2035552222 | | 55555 | 2 | 2035551111 | +----------+-----------+------------+ 2 rows in set (0.00 sec) The problem I have is that, when I run the configuration segment below only the first instance of avp_pushto in the loop produces the correct value. avp_delete("*"); $var(idx) = 0; if (avp_db_query("SELECT attribute, value FROM usr_preferences WHERE username='$rU' ORDER BY attribute")) { while($var(idx) < 5) { if ($(avp(i:1)[$var(idx)]) != NULL) { xlog("L_NOTICE", "avp(i:1)[$var(idx)]=$(avp(i:1)[$var(idx)]) avp(i:2)[$var(idx)]=$(avp(i:2)[$var(idx)])\n"); avp_pushto("$ru/username", "$(avp(i:2)[$var(idx)])"); rewritehostport("10.10.10.10:5060"); xlog("L_NOTICE", "$ru\n"); } else { xlog("L_NOTICE", "avp(i:1)[$var(idx)] == NULL\n"); } $var(idx) = $var(idx) + 1; } } else { xlog("L_NOTICE", "avp_db_query() returned no records\n"); }; So, the avp_db_query() works exactly as expected. The problem is that the second avp_pushto() doesn't change the value in the ruri username. avp(i:1)[0]=1 avp(i:2)[0]=2035552222 sip:2035552222@10.10.10.10:5060;user=phone avp(i:1)[1]=2 avp(i:2)[1]=2035551111 <-- This is the mismatch sip:2035552222@10.10.10.10:5060;user=phone <-- This is the mismatch avp(i:1)[2] == NULL avp(i:1)[3] == NULL avp(i:1)[4] == NULL As always, thanks for any help. - Jeremy

2 1

[Serusers] Unix Socket Problem
by frq ser 02 Jan '08

02 Jan '08

Hi I am running the simple configuration in which SER 0.9.7-pre1 serves as Proxy (at port 5060) and SER-SEMS is the media server (at port 5070). At port 5070, the SER version is 0.9.6-pre1 and SEMS version is 0.10.0-rc2. I have placed log commands in the config files just to record the process flow. Using SIPSAK, I am sending an INVITE (for SER-SEMS at :5070) through the proxy. My sipsak message is this: C:>sipsak -f invite.txt -s sip:200@192.168.3.208:5060 -vvv The request enters the proxy ser.cfg file and is redirected to the SER-SEMS (see the log messages below). The user name (200@...) is used by if statement to invoke the announcement application. However, I don't see any response from the unix socket (no announcement played) nor do I see any error message, and the connection finally times out. Can anyone please tell me how I can check whether the unix sockets are doing their job or not? Why does the process not return any error and why does it just time out? Thanks in advance for your help. Frq PS: Here are the (somewhat condensed) versions of SER and SEMS outputs (log messages mostly), SIPSAK responses, and the relevant config files. I apologise for sending a huge email. ------------------------------------------------------------------------------------------- SER output [root@xxx ~]# ser Listening on udp: 192.168.3.208 [192.168.3.208]:5060 tcp: 192.168.3.208 [192.168.3.208]:5060 aliases... WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 107520 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(0) INFO: fifo process starting: 5058 2(0) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 2(0) WARNING: no fifo_db_url given - fifo DB commands disabled! 0(5056) Inside the main route.... 0(5056) just passed the sanity checks... 0(5056) inside method-register... 0(5056) inside uri-myself... 0(5056) Inside route1... 0(5056) Inside the main route.... 0(5056) just passed the sanity checks... 0(5056) inside method-register... 0(5056) inside uri-myself... 0(5056) Inside route1... ------------------------------------------------------------------------------------------- SER-SEMS output [root@xxx ~]# /opt/ser-sems/sbin/ser -f /opt/ser-sems/etc/ser/ser.cfg Listening on udp: 192.168.3.208 [192.168.3.208]:5070 tcp: 192.168.3.208 [192.168.3.208]:5070 aliases .... WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing textops - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 107520 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(0) INFO: fifo process starting: 5061 2(0) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 2(0) WARNING: no fifo_db_url given - fifo DB commands disabled! 0(5059) Inside route block.... 0(5059) Inside if-invite... 0(5059) Inside if-uri-200... 0(5059) Inside route block.... ------------------------------------------------------------------------------------------- INVITE message used by SIPSAK (invite.txt ) is this: INVITE sip:200@192.168.3.208:5070 SIPi/2.0 From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 Contact: sip:rsf@192.168.3.77 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 ------------------------------------------------------------------------------------------- SIPSAK responses: fqdnhostname: 192.168.3.77 our Via-Line: Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;a lias New message with Via-Line: INVITE sip:200@192.168.3.208:5070 SIPi/2.0 Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 Contact: sip:rsf@192.168.3.77 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 request: INVITE sip:200@192.168.3.208:5070 SIPi/2.0 Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 Contact: sip:rsf@192.168.3.77 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 send to: UDP:192.168.3.208:5060 message received received from: UDP:192.168.3.208:5060 SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport=2647;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Server: Sip EXpress router (0.9.7-pre1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.3.208:5060 "Noisy feedback tells: pid=5056 req_src_ip=192. 168.3.77 req_src_port=2647 in_uri=sip:200@192.168.3.208:5070 out_uri=sip:200@192 .168.3.208:5070 via_cnt==1" ** reply received after 0.000 ms ** SIP/2.0 100 trying -- your call is important to us provisional received; still waiting for a final response message received received from: UDP:192.168.3.208:5060 SIP/2.0 101 Trying - just wait a minute! Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport=2647;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Server: Sip EXpress router (0.9.6-sems (i386/linux)) Content-Length: 0 Warning: 392 192.168.3.208:5070 "Noisy feedback tells: pid=5059 req_src_ip=192. 168.3.208 req_src_port=5060 in_uri=sip:200@192.168.3.208:5070 out_uri=sip:200@19 2.168.3.208:5070 via_cnt==2" ** reply received after 16.000 ms ** SIP/2.0 101 Trying - just wait a minute! provisional received; still waiting for a final response message received received from: UDP:192.168.3.208:5060 Content-Length set to 0 New message with changed Content-Length: ACK sip:200@192.168.3.208:5070 SIPi/2.0 Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070 Contact: sip:rsf@192.168.3.77 CSeq: 100 ACK Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 reply with copyed To: ACK sip:200@192.168.3.208:5070 SIPi/2.0 Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070;tag=cc619c805c36ff52db55353ff7c0aad3-be50 Contact: sip:rsf@192.168.3.77 CSeq: 100 ACK Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 request: ACK sip:200@192.168.3.208:5070 SIPi/2.0 Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070;tag=cc619c805c36ff52db55353ff7c0aad3-be50 Contact: sip:rsf@192.168.3.77 CSeq: 100 ACK Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Max-Forwards: 400 Content-Length: 0 send to: UDP:192.168.3.208:5060 SIP/2.0 408 Request Timeout Via: SIP/2.0/UDP 192.168.3.77:2646;branch=z9hG4bK.7271c2b5;rport=2647;alias From: sip:rsf@192.168.3.77 To: sip:200@192.168.3.208:5070;tag=cc619c805c36ff52db55353ff7c0aad3-be50 CSeq: 100 INVITE Call-ID: 9787963-3319555348-76751(a)192.168.3.77 Server: Sip EXpress router (0.9.6-sems (i386/linux)) Content-Length: 0 Warning: 392 192.168.3.208:5070 "Noisy feedback tells: pid=5060 req_src_ip=192. 168.3.208 req_src_port=5060 in_uri=sip:200@192.168.3.208:5070 out_uri=sip:200@19 2.168.3.208:5070 via_cnt==0" ** reply received 29235.000 ms after first send and -15.000 ms after last send ** SIP/2.0 408 Request Timeout final received ------------------------------------------------------------------------------------------- Ser.cfg (for proxy server at :5060) debug=3 fork=no log_stderror=yes listen=192.168.3.208 #2.13 # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) route { log(1, "Inside the main route....\n"); # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; log(3, "just passed the sanity checks...\n"); # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method!="REGISTER") { record_route(); log(3, "inside method-register...\n"); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { log(3, "inside loose route...\n"); route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { log(3, "inside uri-myself...\n"); route(1); break; }; . . . route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ log(3, "Inside route1...\n"); if (!t_relay()) { sl_reply_error(); }; } . . ----------------------------------------------------------------------------------------- SER (Stack for SEMS at :5070) config file is this: # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) #/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes #*/ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.3.208 port=5070 fifo="/tmp/ser_fifo" unix_sock="/tmp/ser_sock" # ------------------ module loading ---------------------------------- loadmodule "/opt/ser-sems/lib/ser/modules/sl.so" loadmodule "/opt/ser-sems/lib/ser/modules/tm.so" loadmodule "/opt/ser-sems/lib/ser/modules/rr.so" loadmodule "/opt/ser-sems/lib/ser/modules/maxfwd.so" loadmodule "/opt/ser-sems/lib/ser/modules/usrloc.so" loadmodule "/opt/ser-sems/lib/ser/modules/registrar.so" loadmodule "/opt/ser-sems/lib/ser/modules/textops.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("tm", "pass_provisional_replies", 1) # ------------------------- request routing logic ------------------- route{ log(1, "Inside route block....\n"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # ----------------------------------------------------------------------- # Redirection-related processing # ---------------------------------------------------------------------- if (method == "ACK" || method == "INVITE" || method == "BYE" || method == "CANCEL"){ # switch to stateful mode if (!t_newtran()){ sl_send_reply("500", "Could not create transaction"); break; }; # prevent timeout on the other side t_reply("101", "Trying - just wait a minute!"); if (method == "INVITE"){ log(2, "Inside if-invite...\n"); # Redirect the call to the 'conference' plugin # in case the URI begins with 100 if (uri =~"sip:100*@"){ # assumes that SMES configuration parameter # 'socket_name=' has been set to '/tmp/sems_sock' log(3, "Inside if-uri-100...\n"); if (!t_write_unix("/tmp/sems_sock","conference")){ t_reply("500","Error contacting SEMS 1"); }; break; }; # Redirect the call to the 'announcement' plugin in case # the URI begins with 200 if (uri =~"sip:200*@"){ log(3, "Inside if-uri-200...\n"); if (!t_write_unix("/tmp/sems_sock","announcement")){ t_reply("500","Error contacting SEMS 2"); log(3, "just past 200-unixsocket...\n"); }; break; }; # No service number, redirect to voicemail # Load email address into AVP so that voicemail gets the # callee's email address (see below for avpops modparams) #avp_db_load("$uri", "$email/$email_scheme"); #if(!t_write_unix("/tmp/sems_sock","voicemail")){ # t_reply("500","Error contacting SEMS"); #}; break; } . . } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } ----------------------------------------------------------------------------------------- Finally, the relevant parts of sems.conf file are these: # $Id: sems.conf.sample 265 2007-03-07 21:31:54Z sayer $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # . . socket_name=/tmp/sems_sock reply_socket_name=/tmp/sems_rsp_sock ser_socket_name=/tmp/ser_sock listen=192.168.3.208 sip_port=5070 . . .

2 1

[OpenSER-Users] Some issues with Session-Timer module
by Franz Edler 31 Dec '07

31 Dec '07

Hi, I have just made some tests with sst-module (OpenSER v1.3) and I found the following two issues: I case the min-se value of sst-module is higher than the Session-Expires header field of a received INVITE OpenSER rejects the INVITE request with 422 response (that's as expected). But: 1. the Min-SE header field in 422 response (packet 18 in attached trace) does not end with CR/LF so that it is concatenated with the next header field (Server header) syslog prints in this case: ERROR:sst:sst_dialog_terminate_CB: DID 0xb5582d80 failed (canceled). Terminating session. 2. OpenSER in addition continues to forward the already rejected INVITE transaction with "100 Giving a try"(packet 19) and forwards the INVITE to the UAS (packet 20). The next issue I discovered is with the UAC (Xlite): The repeated INVITE (caused by the 422 Response) does not increment the CSeq header field so that it is regarded as same request leading to a "482 Merged request" rejection at the UAS (Eyebeam). I have attached the tcpdump-trace and the according SIP-scenario trace. Any comments appreciated. Regards Franz

1 1

[OpenSER-Users] (no subject)
by VoIP Forums www.Go4Calls.com 30 Dec '07

30 Dec '07

Hi Friends, How we can authorize Clients with their static IP Address in MySQL subscriber table? We don't want to provide them username or PWS and they also don't need to register. Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

[OpenSER-Users] dialog module: dialog data remain in DB after "dlg_end_dlg"
by Franz Edler 29 Dec '07

29 Dec '07

Hi, I just found that after forced end of a dialog (MI command "dlg_end_dlg") the dialog data remain in the database. The dialog list in memory (MI command "dlg_list") is cleared after forced end of a dialog as expected. Shouldn't the dialog data in the DB also be deleted? Regards Franz

1 0

Re: [OpenSER-Users] ERROR:avpops:check_avp: value types don't match
by Jayesh Nambiar 29 Dec '07

29 Dec '07

Thanks a lot. Its working now. It had to be like: if(avp_check("$avp(i:103)", "eq/i:0/g")) { do certain things } else { do certain things } w/regards, Jayesh ----- Original Message ---- From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> To: Jayesh Nambiar <voip_freak(a)yahoo.co.in> Cc: openser <users(a)openser.org> Sent: Friday, 28 December, 2007 2:54:17 PM Subject: Re: [OpenSER-Users] ERROR:avpops:check_avp: value types don't match Hi Jayesh, try to use the avp_print() debug function to see what avps you have loaded after the avp_db_query() and check the type. Note you need to use debug=6 . http://www.openser.org/docs/modules/1.3.x/avpops.html#AEN611 regards, bogdan Jayesh Nambiar wrote: > Hi All, > I am using the function avp_db_query to query a table and fetch few > values. The query is as follows: > "select subscriptionid, ip, media_status from domestic where > prefix=$rU", "$avp(i:101), $avp(i:102), $avp(i:103)". > > Now the media_status column is a column with datatype as integer which > will contain either 0 or 1. I need to check the value in this column > so I use the following: > > if(avp_check("$avp(i:103)", "eq/0/i")) { > do certain things; > } else { > do certain things; > }; > > Even when the value at media_status column is 0 it does not get into > that condition, it always executes the else condition and I see the > following in the logs: > ERROR:avpops:check_avp: value types don't match > > Can someone please help me to overcome this error. When I keep the > datatype of media_status column as varchar it works fine, but I dont > want to do that as that column is going to conatin only integer values. > > Thanks in advance. > > w/regards, > Jayesh > > > ------------------------------------------------------------------------ > Forgot the famous last words? Access your message archive online. > Click here. > <http://in.rd.yahoo.com/tagline_webmessenger_4/*http://in.messenger.yahoo.co…> > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > Get the freedom to save as many mails as you wish. To know how, go to http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html

1 0

[Serusers] establishment call failure
by dimitris(yahoo) 29 Dec '07

29 Dec '07

hi, i am experiencing on little problem establishishing calls with my SER. First of all , i am running ser under linux opensuse, (ser version: 0.9.6 ) , i also installed rtpproxy and made the needed changes to my ser.cfg. When i "connetct" 2 different users with my SER locally , using softphone, everything looks fine. Gennerally the registration procedure using MySQL works fine(locally or not). When i am connected locally, a remote user can call me with no problems... The problem is the following, and i would appreciate if you could help me... When i try to call a remote user, the call cannot be established from my side. At the other side, the establishment of the call is ok. The message is the following: No ACK recieved... PS: I am only working now, till the level of the establishment of the calls... When i solve this problem , i will continue to the voice and video transmition, where i will need your help for sure... PS2: In order rtpproxy to run on the same computer with SER, i type rtpproxy with no parameters ?? can you help me with that too ??? Thank you in advance I send you also my ser.cfg

2 1

[OpenSER-Users] A Happy New Year
by Bogdan-Andrei Iancu 28 Dec '07

28 Dec '07

Hi everybody, I hope you found under the tree something that made you smile and happy, something that made you think about 2007 as a fulfilled year. I and the Voice System team wish you A Happy New Year, a good party and rest over the years and see you in 2008 ;) Best regards, Bogdan

1 0

[OpenSER-Users] xlog: color PV moved in xlog module ?
by Iñaki Baz Castillo 28 Dec '07

28 Dec '07

Hi, a change in 1.3 is: xlog: color PV moved in xlog module Could somebody explain what does it mean? Thanks a lot. -- Iñaki Baz Castillo

2 2

[OpenSER-Users] ERROR:avpops:check_avp: value types don't match
by Jayesh Nambiar 28 Dec '07

28 Dec '07

Hi All, I am using the function avp_db_query to query a table and fetch few values. The query is as follows: "select subscriptionid, ip, media_status from domestic where prefix=$rU", "$avp(i:101), $avp(i:102), $avp(i:103)". Now the media_status column is a column with datatype as integer which will contain either 0 or 1. I need to check the value in this column so I use the following: if(avp_check("$avp(i:103)", "eq/0/i")) { do certain things; } else { do certain things; }; Even when the value at media_status column is 0 it does not get into that condition, it always executes the else condition and I see the following in the logs: ERROR:avpops:check_avp: value types don't match Can someone please help me to overcome this error. When I keep the datatype of media_status column as varchar it works fine, but I dont want to do that as that column is going to conatin only integer values. Thanks in advance. w/regards, Jayesh Now you can chat without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php

2 1

[OpenSER-Users] LCR module: missing the link between lcr and gw
by CSB 28 Dec '07

28 Dec '07

I have read and re-read the overview of the lcr module but still think I'm failing to understand it. What I want to achieve is routing to different gateways based on number dialled e.g. 001, 0044, 0086 should result in different gateways. Looking at the tables, I would guess that the link is lcr -> gw_grp -> gw as shown in the following example: lcr prefix from_uri grp_id priority 001 1 1 001 2 2 0044 3 1 0086 4 1 0086 5 2 gw_grp grp_id grp_name 1 US 1 2 IS 2 3 UK 1 4 China 1 5 China 2 gw gw_name grp_id ip_addr port uri_scheme transport strip prefix A 1 192.1 5060 1 011 B 2 192.2 5060 1 011 etc I don't think I have understood correctly because the documentation implies that gw_grp is optional. Is there a tutorial for this module that could calrify my understanding? I'm also trying to understand what the various avps are used for. Any advice appreciated. Regards Cameron

2 3

[OpenSER-Users] LCR module gw database IP address column
by CSB 28 Dec '07

28 Dec '07

According to http://www.openser.org/docs/OpenSER_Database_Structure.html the ip_addr column of the gw table is int. Am I missing something obvious? How does the IP address (e.g. 127.0.0.1) get stored in such a column? Regards Cameron

2 2

[OpenSER-Users] SEMS 0.10.0 incompatible with openser 1.3.0?
by CHEN XUEQIN 28 Dec '07

28 Dec '07

Hi all: I just tested SEMS media server 0.10.0 with openser 1.3.0. The test case is : 1. openser get SIP message, indentify message by SIP URI, and deliver to SEMS by UNIX socket [openser quote] modparam("mi_datagram", "socket_name", "/tmp/ser_sock") .. if (uri=~"sip:100.*@") { # assumes that Sems configuration parameter 'socket_name=' # has been set to /tmp/sems_sock if(!t_write_unix("/tmp/sems_sock","conference")) { t_reply("500","error contacting sems"); }; exit; }; [/openser quote] 2. SEMS get SIP message, give a response through mi_datagram, the response is like [response snip] :t_reply:/tmp/1D8FFAE5-47746119000C9DF2-B6E03B90 200 OK 41621:1987570916 7D41B2DF-47746119000C89B3-B7CA76C0 Contact: <sip:100@192.168.35.40> Content-Type: application/sdp . v=0^M o=username 0 0 IN IP4 192.168.35.40^M s=session^M c=IN IP4 192.168.35.40^M t=0 0^M m=audio 10002 RTP/AVP 0 8 3 101^M a=rtpmap:0 PCMU/8000^M a=rtpmap:8 PCMA/8000^M a=rtpmap:3 GSM/8000^M a=rtpmap:103 telephone-event/8000^M a=fmtp:101 0-15^M . [/response snip] But the problem is that openser says " command not available". The detail log is: Dec 28 10:36:09 [17682] ERROR:mi_datagram:identify_command: the request's first line is invalid :no newline after the second : Dec 28 10:36:09 [17682] ERROR:mi_datagram:mi_datagram_server: command not available Dec 28 10:36:09 [17682] DBG:mi_datagram:mi_datagram_server: received :t_reply:/tmp/70FAB4E3-47746119000CA82E-B6E03B90 500 could not send response 41621:1987570916 3E69BD05-47746119000CA86F-B6E03B90 When I replaced openser 1.3.0 with ser-0.9.6 bundled with SEMS 0.10.0, everything was OK. So, is openser 1.3.0 incompatible with SEMS 0.10.0? Or I made a mistake in openser.cfg? Any clue is welcome. Thanks in advance. Regards, Chen Xueqin

2 2

[OpenSER-Users] Problem installing openser1.3.0 with carrieroute module
by Ricardo Martinez 27 Dec '07

27 Dec '07

Hello list. I'm getting this error trying to install the last version of openser. route_config.c:39:21: error: confuse.h: No such file or directory Can someone help me here? Thanks in advance Regards, Ricardo Martinez.-

3 3

[OpenSER-Users] ser + NAT not audio both side
by satish patel 27 Dec '07

27 Dec '07

Dear all I have installed openser with mediaproxy and it is working fine without nat but behind the nat Xlite register successfully and call established but thing is that no audio on both side after 1 min call automatically disconnected Debug error [root@proxy ~]# /usr/local/mediaproxy/mediaproxy.py --no-fork warning: accounting is enabled but the accounting module is missing. accounting is not available! Listening for commands on local socket `/var/run/mediaproxy.sock' Listening for remote commands is disabled Using IP address `203.124.16.109 # This is where OpenSER installed' for the RTP/RTCP proxy request YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY. 202.131.100.102:8128:audio 59.96.156.122 example.com local 192.168.104.164 remote X-Lite=20release=201011s=20stamp=2041150 info=from:123@example.com,to:111@example.com,fromtag:a9746f3e,totag: session YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY.: started. listening on 203.124.16.109:#,This,is,where,OpenSER,installed,60000 execution time: 1.72 ms lookup YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY. 192.168.104.164:13930:audio 192.168.104.164 example.com local example.com unknown X-Lite=20release=201002tx=20stamp=2029712 info=from:123@example.com,to:111@example.com,fromtag:a9746f3e,totag:e376233a execution time: 0.28 ms lookup YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY. 192.168.104.164:13930:audio 192.168.104.164 example.com local example.com unknown X-Lite=20release=201002tx=20stamp=2029712 info=from:123@example.com,to:111@example.com,fromtag:a9746f3e,totag:e376233a execution time: 0.37 ms lookup YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY. 192.168.104.164:13930:audio 192.168.104.164 example.com local example.com unknown X-Lite=20release=201002tx=20stamp=2029712 info=from:123@example.com,to:111@example.com,fromtag:a9746f3e,totag:e376233a execution time: 0.37 ms session YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY.: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) session YTEzN2ZiNTIwZDhkNDI0MDE1N2NjYmZkY2FlODc1MWY.: ended (did timeout). Is there any nat issuse of RTP port problem ??? ----PGP Signature-- Satish Patel mobile:- +91-9818875535 http://www.linuxbug.org --------------------------------- Never miss a thing. Make Yahoo your homepage.

2 1

[OpenSER-Users] avp_db_query information
by raviprakash sunkara 27 Dec '07

27 Dec '07

Hello Users Merry X-mas and Adv . Happy New Year So long back ago , I posted the same imformation to mailing listing. Is in Black Cat of OpenSER 1.3.0, avp_db_query can execute the function and stores procedures of MySQL database? -- Thanks &Regards Ravi Prakash Sunkara VoIP Development Tech Lead

2 2

Re: [OpenSER-Users] [OT] Any voicemail server supporting RFC 3842 (MWI) ?
by Iñaki Baz Castillo 27 Dec '07

27 Dec '07

2007/12/27, Juha Heinanen <jh(a)tutpro.com>: > Iñaki Baz Castillo writes: > > > Thanks, I'll try it. > > i made a mistake, you need to use mailbox application rather than > voicemail application. Yes, I already realized of that ;) The problem is that mailbox/mailbox_query apps seem to use IMAP as storage while I prefer to use MySQL. Anyway there is not too much info about those two SEMS applications, I think that for now I'll try with Asterisk + ODBC storage. Thanks for all. -- Iñaki Baz Castillo <ibc(a)aliax.net>

2 1

[OpenSER-Users] [OT] Any voicemail server supporting RFC 3842 (MWI) ?
by Iñaki Baz Castillo 27 Dec '07

27 Dec '07

Hi, Presence_MWI module support PUBLISH or SUBSCRIBE for "Event: message-summary" according to RFC 3842), so a voicemail server could publish voicemail status. Asterisk (as a voicemail server) just allows unsollicited message waiting indication (not RFC 3842). Is there any GPL voicemail system supporting RFC 3842? Regards. -- Iñaki Baz Castillo

2 1

[OpenSER-Users] avp_db_query() problem
by Jeremy George 26 Dec '07

26 Dec '07

Hello All, I expect I have a syntax fluff with an avp_db_query() example, but I can't find it. A pointer to the solution would be greatly appreciated. I'm running mysql 5: Spongy% mysql -V mysql Ver 14.12 Distrib 5.0.27, for pc-linux-gnu (i686) using readline 5.0 and openser 1.3.0: Spongy% openser -V version: openser 1.3.0-tls (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 3304 2007-12-11 12:55:11Z bogdan_iancu $ main.c compiled on 12:09:35 Dec 14 2007 with gcc 3.4.6 A direct query of the mysql usr_preferences table works as expected: mysql> select attribute, value from usr_preferences where username='55555' order by attribute; +-----------+-------+ | attribute | value | +-----------+-------+ | 1 | 55510 | | 2 | 55520 | | 3 | 55530 | | 4 | 55540 | | 5 | 55500 | +-----------+-------+ 5 rows in set (0.00 sec) This configuration taken almost directly from avp_db_query.html mpath="/usr/local/lib/openser/modules" ... loadmodule "mysql.so" loadmodule "avpops.so" loadmodule "xlog.so" ... avp_delete("*"); if (avp_db_query("SELECT attribute, value FROM usr_preferences WHERE username='55555' ORDER BY attribute")) { xlog("L_NOTICE", "avp(i:1[1])=$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1])\n"); xlog("L_NOTICE", "avp(i:1[2])=$avp(i:1[2]) avp(i:2[2])=$avp(i:2[2])\n"); xlog("L_NOTICE", "avp(i:1[3])=$avp(i:1[3]) avp(i:2[3])=$avp(i:2[3])\n"); xlog("L_NOTICE", "avp(i:1[4])=$avp(i:1[4]) avp(i:2[4])=$avp(i:2[4])\n"); xlog("L_NOTICE", "avp(i:1[5])=$avp(i:1[5]) avp(i:2[5])=$avp(i:2[5])\n"); } else { xlog("L_NOTICE", "avp_db_query() returned no records\n"); }; produces these errors: Dec 26 14:16:28 [25226] WARNING:core:main: no fork mode Dec 26 14:16:28 [25226] INFO:core:init_tcp: using epoll_lt as the TCP io watch method (auto detected) Dec 26 14:16:28 [25226] NOTICE:core:main: version: openser 1.3.0-tls (i386/linux) Dec 26 14:16:28 [25226] INFO:core:main: using 32 Mb shared memory Dec 26 14:16:28 [25226] INFO:core:main: using 1 Mb private memory per process Dec 26 14:16:28 [25226] INFO:sl:mod_init: Initializing StateLess engine Dec 26 14:16:28 [25226] INFO:tm:mod_init: TM - initializing... Dec 26 14:16:28 [25226] INFO:acc:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:maxfwd:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:usrloc:ul_init_locks: locks array size 512 Dec 26 14:16:28 [25226] INFO:registrar:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:auth:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:auth_db:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:textops:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:exec:mod_init: exec - initializing Dec 26 14:16:28 [25226] INFO:options:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:avpops:avpops_init: initializing... Dec 26 14:16:28 [25226] INFO:xlog:mod_init: initializing... Dec 26 14:16:28 [25226] ERROR:core:parse_avp_name: invalid ID <1[1]> not a number Dec 26 14:16:28 [25226] ERROR:core:pv_parse_avp_name: bad avp name [1[1]] Dec 26 14:16:28 [25226] ERROR:core:pv_parse_spec: pvar "avp" has an invalid name param [1[1]] Dec 26 14:16:28 [25226] ERROR:core:pv_parse_spec: wrong char [)/41] in [$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1]) ] at [11 (5)] Dec 26 14:16:28 [25226] ERROR:xlog:xdbg_fixup: ERROR: wrong format[avp(i:1[1])=$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1]) ] Dec 26 14:16:28 [25226] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 288 Dec 26 14:16:28 [25226] ERROR:core:main: failed to fix configuration with err code -1 Thanks much for any help. - Jeremy

2 2

[OpenSER-Users] avp_db_query problem
by Jeremy George 26 Dec '07

26 Dec '07

Hello All, I expect I have a syntax fluff with an avp_db_query() example, but I can't find it. A pointer to the solution would be greatly appreciated. I'm running mysql 5: Spongy% mysql -V mysql Ver 14.12 Distrib 5.0.27, for pc-linux-gnu (i686) using readline 5.0 and openser 1.3.0: Spongy% openser -V version: openser 1.3.0-tls (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 3304 2007-12-11 12:55:11Z bogdan_iancu $ main.c compiled on 12:09:35 Dec 14 2007 with gcc 3.4.6 A direct query of the mysql usr_preferences table works as expected: mysql> select attribute, value from usr_preferences where username='55555' order by attribute; +-----------+-------+ | attribute | value | +-----------+-------+ | 1 | 55510 | | 2 | 55520 | | 3 | 55530 | | 4 | 55540 | | 5 | 55500 | +-----------+-------+ 5 rows in set (0.00 sec) This configuration taken almost directly from avp_db_query.html mpath="/usr/local/lib/openser/modules" ... loadmodule "mysql.so" loadmodule "avpops.so" loadmodule "xlog.so" ... avp_delete("*"); if (avp_db_query("SELECT attribute, value FROM usr_preferences WHERE username='55555' ORDER BY attribute")) { xlog("L_NOTICE", "avp(i:1[1])=$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1])\n"); xlog("L_NOTICE", "avp(i:1[2])=$avp(i:1[2]) avp(i:2[2])=$avp(i:2[2])\n"); xlog("L_NOTICE", "avp(i:1[3])=$avp(i:1[3]) avp(i:2[3])=$avp(i:2[3])\n"); xlog("L_NOTICE", "avp(i:1[4])=$avp(i:1[4]) avp(i:2[4])=$avp(i:2[4])\n"); xlog("L_NOTICE", "avp(i:1[5])=$avp(i:1[5]) avp(i:2[5])=$avp(i:2[5])\n"); } else { xlog("L_NOTICE", "avp_db_query() returned no records\n"); }; produces these errors: Dec 26 14:16:28 [25226] WARNING:core:main: no fork mode Dec 26 14:16:28 [25226] INFO:core:init_tcp: using epoll_lt as the TCP io watch method (auto detected) Dec 26 14:16:28 [25226] NOTICE:core:main: version: openser 1.3.0-tls (i386/linux) Dec 26 14:16:28 [25226] INFO:core:main: using 32 Mb shared memory Dec 26 14:16:28 [25226] INFO:core:main: using 1 Mb private memory per process Dec 26 14:16:28 [25226] INFO:sl:mod_init: Initializing StateLess engine Dec 26 14:16:28 [25226] INFO:tm:mod_init: TM - initializing... Dec 26 14:16:28 [25226] INFO:acc:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:maxfwd:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:usrloc:ul_init_locks: locks array size 512 Dec 26 14:16:28 [25226] INFO:registrar:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:auth:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:auth_db:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:textops:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:exec:mod_init: exec - initializing Dec 26 14:16:28 [25226] INFO:options:mod_init: initializing... Dec 26 14:16:28 [25226] INFO:avpops:avpops_init: initializing... Dec 26 14:16:28 [25226] INFO:xlog:mod_init: initializing... Dec 26 14:16:28 [25226] ERROR:core:parse_avp_name: invalid ID <1[1]> not a number Dec 26 14:16:28 [25226] ERROR:core:pv_parse_avp_name: bad avp name [1[1]] Dec 26 14:16:28 [25226] ERROR:core:pv_parse_spec: pvar "avp" has an invalid name param [1[1]] Dec 26 14:16:28 [25226] ERROR:core:pv_parse_spec: wrong char [)/41] in [$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1]) ] at [11 (5)] Dec 26 14:16:28 [25226] ERROR:xlog:xdbg_fixup: ERROR: wrong format[avp(i:1[1])=$avp(i:1[1]) avp(i:2[1])=$avp(i:2[1]) ] Dec 26 14:16:28 [25226] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 288 Dec 26 14:16:28 [25226] ERROR:core:main: failed to fix configuration with err code -1 Thanks much for any help. - Jeremy

1 0

[OpenSER-Users] SER problem with NAT
by satish patel 26 Dec '07

26 Dec '07

Dear all I have installed SER with multidomain support and it is working fine i have host 2 domain abc.com and example.com now i dont have any NAT between server and client But now i have few more client. they are behind NAT so i have find nathelper help and configure with mediaproxy now what happend when i test this configuration in my demo setup [192.168.1.2_SIP_Client]------------[SER + Mediaproxy + nathaper]------[192.168.1.3_SIP_Client] MY server IP address is 192.168.1.1 everyone in same subnet no NAT between them ser configuration with NAT + Mediaproxy and mediaproxy running on same machine.. When i trying to register Xlite on server i got error 483 Too many Hops why is there any domain related problem or something else when i remove name server in /etc/resolve.conf i got Timeout error My --------- ser.cfg # $Id: nat-mediaproxy.cfg 51 2006-01-31 13:28:04Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=7 fork=yes log_stderror=yes listen=192.168.104.20 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=yes rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://root:tulip@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/mediaproxy.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" modparam("auth_db|domain|uri_db|usrloc", "db_url", "mysql://root:tulip@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") modparam("usrloc|registrar|auth_db|avpops|group", "use_domain", 1) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("192.168.104.20:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (is_from_local()) { if (method=="REGISTER") { route(2); break; }; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } # REGISTER Message Handling # ------------------------- route[2] { sl_send_reply("100", "Trying"); if (!search("^Contact:[ ] *\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ----PGP Signature-- Satish Patel mobile:- +91-9818875535 http://www.linuxbug.org --------------------------------- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

1 0

[Serusers] ser nathelper too many hope isse
by satish patel 26 Dec '07

26 Dec '07

Dear all I have install ser with nathelper but when i try to register xlite i got this error messge 3(31047) WARNING:vqm_resize: resize(0) called 3(31047) DEBUG: add_to_tail_of_timer[2]: 0x40586698 3(31047) DEBUG: reply relayed. buf=0x81220c0: SIP/2.0 4..., shmem=0x405a01d0: SIP/2.0 4 3(31047) DEBUG: cleanup_uac_timers: RETR/FR timers reset 3(31047) DEBUG:destroy_avp_list: destroying list (nil) 3(31047) receive_msg: cleaning up 3(31047) SIP Reply (status): 3(31047) version: <SIP/2.0> 3(31047) status: <483> 3(31047) reason: <Too Many Hops> 3(31047) parse_headers: flags=1 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.4f2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=1 3(31047) parse_headers: this is the first via 3(31047) After parse_msg... 3(31047) forward_reply: found module tm, passing reply to it 3(31047) DEBUG: t_check: msg id=258 global id=257 T start=0xffffffff 3(31047) parse_headers: flags=17 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.3f2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) parse_headers: this is the second via 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.2f2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.1f2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.0f2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) Found param type 232, <branch> = <z9hG4bK79cd.fe2da674.0>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) Found param type 235, <rport> = <5061>; state=6 3(31047) Found param type 232, <branch> = <z9hG4bK00C839C4E76F483741C969446436A708>; state=16 3(31047) end of header reached, state=5 3(31047) parse_headers: Via found, flags=17 3(31047) DEBUG: add_param: tag=2ec2004a41f4343ae885c4e522e0f260.52d6 3(31047) end of header reached, state=29 3(31047) DEBUG: get_hdr_field: <To> [65]; uri=[sip:444@abc.com] 3(31047) DEBUG: to body [ser <sip:444@abc.com>] 3(31047) get_hdr_field: cseq <CSeq>: <41216> <REGISTER> 3(31047) DEBUG: t_reply_matching: hash 56471 label 1198183156 branch 0 3(31047) DEBUG: t_reply_matching: reply matched (T=0x40584cb8)! 3(31047) DEBUG: t_check: msg id=258 global id=258 T end=0x40584cb8 3(31047) DEBUG: reply_received: org. status uas=0, uac[0]=0 local=0 is_invite=0) 3(31047) parse_headers: flags=64 3(31047) DEBUG: get_hdr_body : content_length=0 3(31047) found end of header 3(31047) ->>>>>>>>> T_code=0, new_code=483 3(31047) DEBUG: relay_reply: branch=0, save=0, relay=0 3(31047) old size: 920, new size: 857 3(31047) build_res_from_sip_res: copied size: orig:90, new: 27, rest: 830 msg= SIP/2.0 483 Too Many Hops Via: SIP/2.0/UDP 192.168.104.20;branch=z9hG4bK79cd.3f2da674.0 Via: SIP/2.0/UDP 192.168.104.20;branch=z9hG4bK79cd.2f2da674.0 Via: SIP/2.0/UDP 192.168.104.20;branch=z9hG4bK79cd.1f2da674.0 Via: SIP/2.0/UDP 192.168.104.20;branch=z9hG4bK79cd.0f2da674.0 Via: SIP/2.0/UDP 192.168.104.20;branch=z9hG4bK79cd.fe2da674.0 Via: SIP/2.0/UDP 192.168.104.20:5061;rport=5061;branch=z9hG4bK00C839C4E76F483741C969446436A708 From: ser <sip:444@abc.com>;tag=889909258 To: ser <sip:444@abc.com>;tag=2ec2004a41f4343ae885c4e522e0f260.52d6 Call-ID: 7F06D3E766CAF64EAA23E6D089B86795(a)abc.com CSeq: 41216 REGISTER Server: Sip EXpress router (0.9.6 (i386/linux)) Content-Length: 0 Warning: 392 192.168.104.20:5060 "Noisy feedback tells: pid=31047 req_src_ip=192.168.104.20 req_src_port=5060 in_uri=sip:abc.com out_uri=sip:abc.com via_cnt==18" $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- Meet people who discuss and share your passions. Join them now.

1 0

[Serusers] ser + nat + mediaproxy registration issue
by satish patel 26 Dec '07

26 Dec '07

I have installed ser-0.9.x and install mediaproxy on same machine where ser running Now when i going to register Xlite i got error message 483-Too Many Hop http://onsip.org example configuration my configuration is # $Id: nat-mediaproxy.cfg 51 2006-01-31 13:28:04Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=7 fork=yes log_stderror=yes listen=192.168.104.20 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://root:tulip@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/mediaproxy.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" modparam("auth_db|domain|uri_db|usrloc", "db_url", "mysql://root:tulip@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- # if (method=="INVITE" && client_nat_test("3")) { # # INSERT YOUR IP ADDRESS HERE # record_route_preset("192.168.104.20:5060;nat=yes"); # } else if (method!="REGISTER") { # record_route(); # }; record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- Chat on a cool, new interface. No download required. Click here.

1 0

[OpenSER-Users] [CPL] Is possible to group <not-present> and <otherwise>?
by Iñaki Baz Castillo 24 Dec '07

24 Dec '07

Hi. The following script doesn't proxy to "sip:voicemail@domain" if no "Subject" header exits: <cpl> <incoming> <string-switch field="subject"> <string contains="hello"> <reject status="reject" reason="Subjet = hello" /> </string> <otherwise> <location url="sip:voicemail@domain" /> <proxy /> </location> </otherwise> </string-switch> </incoming> </cpl> For that I need to add <not-present> and clone <otherwise> content: <cpl> <incoming> <string-switch field="subject"> <string contains="hello"> <reject status="reject" reason="Subjet = hello" /> </string> <not-present> <location url="sip:voicemail@domain" /> <proxy /> </location> </not-present> <otherwise> <location url="sip:voicemail@domain" /> <proxy /> </location> </otherwise> </string-switch> </incoming> </cpl> Is there any way to group <not-present> and <otherwise>? -- Iñaki Baz Castillo <ibc(a)aliax.net>

1 1

[OpenSER-Users] Christmas Wishes
by Dan-Cristian Bogos 24 Dec '07

24 Dec '07

With this occasion I would like to wish you all "Merry Christmas and Prosperous New Year" and express my hopes in a continuous grow of OpenSER project during the year to come . Best regards, DanB

2 1

[OpenSER-Users] [CPL] subfield="tel" without "user=phone" parameter?
by Iñaki Baz Castillo 24 Dec '07

24 Dec '07

Hi, in order to match a callee URI as a telephone number (discarding punctuation and separator characters) I should user "tel" as "subfield" value, but this is only valid if "user=phone" parameters exists in the matching URI. RFC 3880 says: The "tel" subfield is defined to be the "user" part of the URI, with visual separators stripped, if the "user=phone" parameter is given to the URI, or if the server is otherwise configured to recognize the user part as a telephone number. Is there any way OpenSer CPL module to recognize "From" user part as telephone number even if no "user=phone" parameter exists? Thanks a lot. -- Iñaki Baz Castillo <ibc(a)aliax.net>

1 0

Re: [OpenSER-Users] [CPL] recurse="yes" doesn't work ? [SOLVED]
by Iñaki Baz Castillo 24 Dec '07

24 Dec '07

2007/12/24, Iñaki Baz Castillo <ibc(a)aliax.net>: > But in fact, the 302 arrives to the callee as if not "recurse" > parameter exists. Maybe I haven't understood the meaning of this > "recurse" parameter? or could it be a bug? Yes, a bug of mine XD For this feature working I must set a CPL parameter ("0 = dissable" by default): modparam("cpl-c","proxy_recurse",2) Now it works :) -- Iñaki Baz Castillo <ibc(a)aliax.net>

1 0

[OpenSER-Users] [CPL] recurse="yes" doesn't work ?
by Iñaki Baz Castillo 24 Dec '07

24 Dec '07

Hi, I try to set "recurse" parameter in order to automatically proxy the call to "Contact" URI present in a 302 response from called UAS: <lookup source="registration"> <success> <proxy timeout="8" recurse="yes"> </proxy> </success> </lookup> Now I set a redirection in the called UAS so it replies a 302. Reading RFC 3880 I assume that the proxy should create a branch to the 302 "Contact" URI instead of passing the 302 to the callee: 6.1. Proxy [...] The second optional parameter is "recurse", which can take two values, "yes" or "no". This specifies whether the server should automatically attempt to place further call attempts to telephony addresses in redirection responses that were returned from the initial server. [...] But in fact, the 302 arrives to the callee as if not "recurse" parameter exists. Maybe I haven't understood the meaning of this "recurse" parameter? or could it be a bug? Thanks for any explanation. Best regards. -- Iñaki Baz Castillo <ibc(a)aliax.net>

1 0

[OpenSER-Users] Stopping branches from onreply_route?
by Helmut Kuper 24 Dec '07

24 Dec '07

Hi, is there a way to stop all branches of an initial INVITE from onreply_route, if a specific branch replies with code 486 ? regrads helmut

2 2

[OpenSER-Users] SIP alternate port, cross connect with 5060 port
by Raju Abhyankar 24 Dec '07

24 Dec '07

Hello, I have setup openser (1.1.1-tls) to talk to our UA's on port 5060 and some UA's on port 4800 (as provider blocks 5060). I am using Mediaproxy (1.9.0). Currently the following works: 1. UA using 5060 makes call to UA using 4800: Phone bell rings and audio two way no issues. 2. UA using 4800 makes call to UA using 5060. Phone bell rings but no audio in either direction All UA's use RTP port 5004. What can I add to the following loose route section so that I can make "2" work above. My loose route section in openser is: ##################################################### listen= udp:XXX.XXX.XXX.XXX:5060 listen= udp:XXX.XXX.XXX.XXX:4800 # Loose route section if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) {(20) sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { (21)if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search ("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; ##################################################### Please do provide if there is a solution to this issue. Your inputs appreciated. regards, Roger

1 0

[OpenSER-Users] T38 re invite not being sent to VoIP provider
by Mike O'Connor 23 Dec '07

23 Dec '07

Hi Guys I'm trying to get T38 working between our VoIP Provider and my epygi PBX. I have the epygi registered with openSER when a phone call is received from our provider openSER forwards the call to the epygi. When this unit detects the fax tone it does a re invite. (the re invite has the SDP indicating it want a T38) This re invite never gets to our VoIP provider. OpenSER is blocking the request. The invite would seem to be hitting our loose routing if (loose_route()) { xlog("L_NOTICE", "Running loose_route logic"); if ((is_method("INVITE|REFER") && ! has_totag())) { route(ROUTE_AUTHTEST); if (retcode == FALSE) return; }; if (method=="INVITE") { route(ROUTE_AUTHTEST); if (retcode == FALSE) return; }; append_hf("P-hint: rr-enforced\r\n"); route(ROUTE_DEFAULTHANDLER); return; }; route[ROUTE_DEFAULTHANDLER] { t_on_reply("REPLYROUTE"); if (!t_relay()) { sl_reply_error(); }; } Any ideas as to what I might have wrong ? Keep in mind that we are using OpenSER as a part of VoIP service to a small number of customers. Thanks Mike

4 5

[OpenSER-Users] Saving Active Calls
by VoIP Forums www.Go4Calls.com 23 Dec '07

23 Dec '07

Hi Friends, How we can save Active Calls in openser mysql database? Please advise us i need to display it on our billing system. Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

[OpenSER-Users] Merry Christmas and a Happy New Year
by luzango.mfupe＠tuune.mobi 23 Dec '07

23 Dec '07

Mates, May you feel the Angels enfold you in their wings. May you always find serenity in the simple things. May the Light of Heaven shine upon your path, and bring you to the completion of your work in Peace and Joy and Grace. Wishing You All the Best this Christmas & a Happy new Year Welcome Year 2008 Tuune Mobile Bldg 6 Room 106,Staatsatillerie Rd FSATIE Tshwane University of Technology Pretoria West Republic of South Africa Website:WWW.Tuune.Mobi Tel:012-382-5953

1 0

[OpenSER-Users] pv transformation does not work when Contact contains spaces
by Robert Dyck 23 Dec '07

23 Dec '07

When I included a pv transformation in my cfg script to extract the expires value from a Contact I found that it would not work if the Contact string contained spaces. I does not seem to affect registration. $(ct{param.value,expires}) The following patch in 1.3.0 works for me -- --- parser/parse_param.c-orig 2007-12-22 23:23:05.000000000 -0800 +++ parser/parse_param.c 2007-12-22 23:23:38.000000000 -0800 @@ -281,7 +281,7 @@ while(_s->len) { switch(_s->s[0]) { - case ' ': + //case ' ': case '\t': case '\r': case '\n': An example of a message that fails Contact expires transformation -- Session Initiation Protocol Request-Line: REGISTER sip:proxy01.sipphone.com SIP/2.0 Method: REGISTER Resent Packet: False Message Header Via: SIP/2.0/UDP 192.168.1.4:5061;branch=z9hG4bK-1849b3b3 From: Gateway <sip:17476316719@proxy01.sipphone.com>;tag=a0bda46794e0291o1 To: Gateway <sip:1234567@proxy01.sipphone.com> Call-ID: 6d0c06a5-8d11d464(a)192.168.1.4 CSeq: 51635 REGISTER Max-Forwards: 70 Authorization: Digest username="1234567",realm="proxy01.sipphone.com",nonce="476e0e7866cafbf20434684456644a3d2022c85f",uri="sip:proxy01.sipphone.com",algorithm=MD5,response="57d8e4aea67f9bb45ced0394fe54d659" Contact: Gateway <sip:1234567@192.168.1.4:5061>;expires=3600 User-Agent: Linksys/SPA3000-3.1.10(GWd) Content-Length: 0 Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER Supported: x-sipura

1 0

[Serusers] (more details) Solution for the NAT IP changed?
by Gonzalo J. Sambucaro 23 Dec '07

23 Dec '07

Folcks, The problem =========== supose that there is an established rtp connection between two endpoints and the media proxy is in the middle doing the relay of the rtp streams, let´s say (MP = mediaproxy) EP A <--------->[NAT with IP1]<-----------> MP <--------------------> EP B EP A sends rtp to MP_IP:MP_PORT passing through the NAT box. EP B sends rtp to MP_IP:MP_PORT without passing through a NAT box. The MP know that the caller = NAT_IP1:NAT_PORT1, and the called = EP_B_IP:EP_B_PORT Now, supose that the NAT box change their PUBLIC IP from IP1 to IP2, so this escenary EP A <------->[NAT with IP1]<---------> MP <-------------> EP B will change to this EP A <------->[NAT with IP2]<---------> MP <--------------> EP B so the MP should detect that change of IPs and continue relaying the rtp streams but now to IP2:PORT2 instead of IP1:PORT1. Well, that was the situation y have experienced. The solution ============ To fix this, I was thinking this solution: 1) When the first rtp packet of a source arrives, save the SSRC field in the MP. - Save the SSRC of the caller. - Save the SSRC of the called. 2) If arrives a rtp packet with unknown source IP but with the same SSRC field of some of the two streams, updates the binding (with the new IP detected) between the caller and the MP or between the called and the MP according to the field SSRC previously saved. Note: SSRC (RFC 3550 RTP), (from the rfc: "The SSRC identifier carried in the RTP header and in various fields of RTCP packets is a random 32-bit number that is required to be globally unique within an RTP session ") What do you think about the solution? Regards, -- Gonzalo J. Sambucaro Ingeniería de Software Tel: +54-341-4230504 MSLC gonzalo(a)mslc.com.ar www.mslc.com.ar Ocampo y Esmeralda - Vivero de Empresas de Base Tecnológica Ciudad Universitaria Rosario UNR, CCT CONICET Rosario - Santa Fé - Argentina

1 0

[Serusers] Forking request - destination in branches?
by Tomasz Zieleniewski 22 Dec '07

22 Dec '07

Hi, I have following issue. All my outgoing requests are forwarded through boundary proxy by setting the destination before t_relay() my problem is when there is another branch created. This second branch is routed in the standard SIP way directly to destination in request URI. How can I force also branches to go through my boundary proxy. Can I somehow check in branch_route that this branch is not the first one (not first message) but the second and and change the destination and make t_relay()? Thank You for any feedback Regards Tomasz

2 4

[Serusers] SER + asterisk integration config
by satish patel 22 Dec '07

22 Dec '07

Dear all anybody have done this job integration SER with Asterisk ????? $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- 5, 50, 500, 5000 - Store N number of mails in your inbox. Click here.

2 1

[OpenSER-Users] UAC gives
by Raju Abhyankar 22 Dec '07

22 Dec '07

Hello, I am using openser-1.1 and have the standard script from onsip. I am using Mediaproxy for NAT traversal. Most of my clients register for days with no issues. A few clients after say a day of operation suddenly start giving getting de-registered. I can see the ATA or UAC trying to register to openser but openser gives a reply back to the UAC saying "401 Unauthorized". The UAC's which give this issue are behind standard home grade wireless routers (netgear/linksys type). Any idea why this may happen. Thanks in advance Roger

1 0

[OpenSER-Users] Any Sip Phone support examples/web_im/click_to_dial.php? Mine failed, UA says "481 Call Leg/Transaction Does Not Exist"
by CHEN XUEQIN 21 Dec '07

21 Dec '07

Hi all: I know that the example uses REFER sip method and follow such process: 1. prepare two SIP softphone(eyebeam 1.5.16.1 ) , register to openser 2. user enter Caller and Callee's SIP Address 3. Web Server receive http request, then construct FIFO command, using t_uac_dlg MI command, build Refer SIP message with From and To header using user input 4. t_uac_dlg is invoked, send sip REFER message to Caller Sip softphone, softphone return 481 Call Leg/Transaction Does Not Exist, so the call can't be setup. I have seen the notice"/Unfortunately, this example does not work. The reason is use of REFER for third-party call-control has not been standardized due to resistance of proponents of B2BUA use (which is somewhat bloated and not always operational)". But I still wonder if any softphone support this example? My openser version: 1.3.0 Thanks. Regards, Chen Xueqin /

2 3

[OpenSER-Users] Merry Christmas and a Happy New Year 2008!
by Daniel-Constantin Mierla 21 Dec '07

21 Dec '07

I wish Merry Christmas and a Happy New Year 2008 to everybody helping with the project, from code to feedback and reports. It was a full year of activities, with two major releases, lot of enhancements, fixes, and participations to events around the world. I think OpenSER fulfills most of the requirements its users need and it will keep being focused on robustness, performance, flexibility and new enhancements. Looking forward to a 2008 of successes. Cheers, Daniel

1 0

[OpenSER-Users] OpenSER SST module for session timer
by Pat wang 21 Dec '07

21 Dec '07

Happy holidays! Not sure what happened to my previous email the format is kind of messy. Sorry about that. I am playing with SST module for session timer and have some questions that I would like someone can help me out. 1. First question is the 422 message is not sent immediately after receiving INVITE with SE header smaller than default 1800 sec. My OpenSER script is very strait forward as the example in the module document: if (method=="INVITE") { if (sstCheckMin("1")) { blah blah.... exit; } } Debug on OpenSER shows the result returns -1 when an INVITE contains SE and Min-SE timer at 90. It is until the INVITE hits lookup("location") it replies a 422. 2. Right after OpenSER sends a 422 it proxies the INVITE to the called party at that same time. So the call flow looks like: Caller OpenSER Callee INVITE (SE 90)=======> <======= 422 ==== ======INVITE===> === INVITE (SE 1800)==> 3. The 422 Session Timer Too Small message put MIN-SE and Server headers in one line which looks like: MIN-SE: 1800Server: OpenSER........... Has anyone tried SST module before and how did it work for you? Many thanks for you help. Best regards, Patrick _________________________________________________________________ The best games are on Xbox 360. Click here for a special offer on an Xbox 360 Console. http://www.xbox.com/en-US/hardware/wheretobuy/

1 0

[OpenSER-Users] (no subject)
by Pat wang 21 Dec '07

21 Dec '07

Happy holidays! I am playing with SST module for session timer and have some questions that I would like someone can help me out. 1. First question is the 422 message is not sent immediately after receiving INVITE with SE header smaller than default 1800 sec. My OpenSER script is very strait forward as the example in the module document: if (method=="INVITE") { if (sstCheckMin("1")) { blah blah.... exit; }}Debug on OpenSER shows the result returns -1 when an INVITE contains SE and Min-SE timer at 90. It is until the INVITE hits lookup("location") it replies a 422. 2. Right after OpenSER sends a 422 it proxies the INVITE to the called party at that same time. So the call flow looks like: Caller OpenSER Callee INVITE (SE 90)=======> <======= 422 ==== ======INVITE===> === INVITE (SE 1800)==> 3. The 422 Session Timer Too Small message put MIN-SE and Server headers in one line which looks like: MIN-SE: 1800Server: OpenSER........... Has anyone tried SST module before and how did it work for you? Many thanks for you help. Best regards,Patrick _________________________________________________________________ Share life as it happens with the new Windows Live. http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_122007

1 0

[OpenSER-Users] Newbie
by ravimondi＠wlink.com.np 21 Dec '07

21 Dec '07

Hello all, I would like to know where could the materials for openser configurations be found for a newbie like me? Thank you

2 1

[Serusers] fifo question
by Strassburger, Patrick 21 Dec '07

21 Dec '07

Hi all, I am struggling arround since hours about fifo. I get all the time a syntax error. Tired several things like chmod, cr /tmp/ser_fifo as a file or directory, created a /temp/ser_fifo. Changed ser.cfg to fifo="/temp/ser_fifo" fifo_mode=0666 with / without "" does not help all the time a syntax error. Can someone explain - what fifo is (file or folder) - would gues it is a file (first in first out)? - does fifo needs to be created before? I changed /temp/ or /tmp/ to 666 but this does not help either. starting ser shows me [root@ser /]# ser -f /etc/ser/ser.cfg -c 0(8574) parse error (23,1-5): syntax error 0(8574) parse error (23,1-5): ERROR: bad config file (2 errors) wherin line 23 is the one with fifo. Kind regards Patrick # ------------- Initial global variables debug=3 fork=yes log_stderror=no listen=<ip adress> # put your real IP here port=5060 alias=sip.mycompany.com children=4 server_signature=yes dns=no rev_dns=no check_via=no syn_branch=yes memlog=1000 sip_warning=yes reply_to_via=no uid="nobody" gid="nobody" mhomed=0 fifo="/temp/ser_fifo" fifo_mode=0666 fifo_db_url="mysql://ser:heslo@localhost/ser" ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

2 1

Re: [OpenSER-Users] Ignore CPL script
by Jesus Rodriguez 20 Dec '07

20 Dec '07

Hello Martin, Please, keep always the list in copy as more people can be interested in the replies. > I am beginner in this. I have this as project to school. In which > part of > config file I have to write > cpl_run_script("incoming","force_stateful") ? You can have something like: if (is_method("INVITE") { # run incoming script if ( !cpl_run_script("incoming","force_stateful") ) { # script execution failed sl_send_reply("500","CPL script execution failed"); exit; }; }; Regards. Saludos JesusR. >> Hi Martin, >> >> >> El 20/12/2007, a las 16:28, Martin Kardi escribió: >> >> [...] >> >>> and this is easy cpl script: >>> >>> <?xml version="1.0" encoding="UTF-8"?> >>> >>> <cpl> >>> <incoming> >>> <reject status="400" reason="Busy" /> >>> </incoming> >>> </cpl> >>> >>> Upload of this cpl script to DB is correct, record in table "cpl" is >>> created >>> for "user" but when I am calling to this "user", openser ignores >>> this script >>> and phone is ringing. >>> I don't know what is problem, could somebody help me? >> >> >> You need to call the cpl_run_script() function to execute the >> uploaded >> cpl script. Something like: >> >> cpl_run_script("incoming","force_stateful") >> >> Regards. >> >> Saludos >> JesusR. >> >> ------------------------------------ >> Jesus Rodriguez >> VozTelecom Sistemas, S.L. >> jesusr(a)voztele.com >> http://www.voztele.com >> Tel. 902360305 >> ------------------------------------- >> >> >> >> >> > > > Saludos JesusR. ------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr(a)voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------

1 0

[Serusers] Solution for the NAT IP changed?
by Gonzalo J. Sambucaro 20 Dec '07

20 Dec '07

Hello folks, I was Working in the NAT IP changed solution, my idea is to change media proxy server (MPS) in a such way when in a established connection and receive a RTP package from unknown IP source (because a NAT server changed their IP), using de field SSRC (RFC 3550 RTP) updates the binding (with the new IP detected) between the caller and the MPS or between the called and the MPS according to the field SSRC previously saved. What do you think about my solution? Regards, Gonzalo Sambucaro. -- Gonzalo J. Sambucaro Ingeniería de Software Tel: +54-341-4230504 MSLC gonzalo(a)mslc.com.ar www.mslc.com.ar Ocampo y Esmeralda - Vivero de Empresas de Base Tecnológica Ciudad Universitaria Rosario UNR, CCT CONICET Rosario - Santa Fé - Argentina

1 0

[OpenSER-Users] OpenSER 1.2.3 patch release is out!
by Bogdan-Andrei Iancu 20 Dec '07

20 Dec '07

Hi everybody, The third patch release of 1.2.x series is out as version 1.2.3. It preserves full compatibility with 1.2 family regarding the configuration file. OpenSER 1.2.3 brings all kind of fixes (mainly from the 1.3 version). No new features were added. The 1.2.3 release includes: - small fixes (compile warnings, porting across UNIX platform errors - bug fixing - mi_xmlrpc update to work with latest 1.0 libxmlrpc-c3 releases - functionality fixes (Route header handling in local sequential requests) - small improvements - more self - sanity checks, more verbose error codes in script (like t_relay() in TM). Tomorrow I will start uploading the tarballs on the web sites. Best regards, Bogdan

1 0

[OpenSER-Users] Ignore CPL script
by Martin Kardi 20 Dec '07

20 Dec '07

Hi, I have problem with CPL. This is my config file for openser: debug=3 # debug level (cmd line: -dddddddddd) fork=yes # Set to no to enter debugging mode log_stderror=no # (cmd line: -E) Set to yes to enter debugging mode check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database # mysql.so must be loaded ! loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/textops.so" #cpl modul -- dopisali sme tu my !!!!!! loadmodule "/usr/lib/openser/modules/cpl-c.so" # Uncomment this if you want digest authentication #loadmodule "/usr/lib/openser/modules/auth.so" #loadmodule "/usr/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #---CPL-C Parameter modparam("cpl-c","db_url","mysql://openser:ser@localhost/openser") modparam("cpl-c","cpl_table","cpl") modparam("cpl-c","cpl_dtd_file","/etc/openser/cpl-06.dtd") modparam("cpl-c","log_dir","/var/log/openser/cpl") #modparam("cpl-c","proxy_recurse",2) #modparam("cpl-c","proxy_route",0) #modparam("cpl-c","nat_flag",6) modparam("cpl-c","lookup_domain","location") #cpl_run_script("incoming","force_statefull") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; cpl_process_register(); save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; and this is easy cpl script: <?xml version="1.0" encoding="UTF-8"?> <cpl> <incoming> <reject status="400" reason="Busy" /> </incoming> </cpl> Upload of this cpl script to DB is correct, record in table "cpl" is created for "user" but when I am calling to this "user", openser ignores this script and phone is ringing. I don't know what is problem, could somebody help me? thanks Martin -- View this message in context: http://www.nabble.com/Ignore-CPL-script-tp14438450p14438450.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

2 1

[OpenSER-Users] Need help troubleshooting flags in onreply route - v.1.2.2
by Dan-Cristian Bogos 20 Dec '07

20 Dec '07

Guys, I would need your help in troubleshooting some pretty serious issue for me. Scenario: relaying an INVITE from openser to a softswitch and recognizing the flags (global and branch ones) in onreply. Everything seems to work fine with relaying the requests, but when the answers are matched in onreply, the flags are gone. Bellow is the log configuration which gives the output used by me to troubleshoot in logs: in route: xlog("First branch: $br, all branches: $bR, flags set: $mf , branch flags: $bf"); xlog("Relaying to: $avp(s:route), message: $mb"); xlog("OUT to Softswitch"); in onreply route: xlog ("ENTERING ON REPLY ROUTE"); xlog("First branch: $br, all branches: $bR, flags set: $mf , branch flags: $bf"); xlog("In onreply, message: $mb"); Please see the output bellow: Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: First branch: <null>, all branches: <null>, flags set: 130 , branch flags: 1024 Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: Relaying to: pstn1, message: INVITE sip:INT_NUMBER_MASKED@sip.itsyscom.com SIP/2.0^M Via: SIP/2.0/UDP 10.10.11.10:7091;rport;branch=z9hG4bK2127028508^M From: <sip:dan@sip.itsyscom.com>;tag=2128765320^M To: <sip:INT_NUMBER_MASKED@sip.itsyscom.com>^M Call-ID: 886593274(a)10.10.11.10^M CSeq: 21 INVITE^M Contact: <sip:dan@10.10.11.10:7091>^M Proxy-Authorization: Digest username="dan", realm="sip.itsyscom.com", nonce="476a40226a7cfaa9a11de5b6e7d6742d45ec6bd4", uri="sip:INT_NUMBER_MASKED@sip.itsyscom.com", response="08872e4a06f011ea7d6f947f1874a882", algorithm=MD5^M Max-Forwards: 4^M User-Agent: Linphone-1.5.1/eXosip^M Subject: Phone call^M Expires: 120^M Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, REFER, SUBSCRIBE, NOTIFY, MESSAGE^M Content-Type: application/sdp^M Content-Length: 310^M ^M v=0^M o=dan 123456 654321 IN IP4 10.10.11.10^M s=A conversation^M c=IN IP4 10.10.11.10^M t=0 0^M m=audio 7078 RTP/AVP 3 0 8 111 110 101^M a=rtpmap:3 GSM/8000/1^M a=rtpmap:0 PCMU/8000/1^M a=rtp Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: OUT to Softswitch Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: ENTERING ON REPLY ROUTE Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: First branch: <null>, all branches: <null>, flags set: 0 , branch flags: 0 Dec 20 10:07:51 ellie /usr/local/sbin/openser[15295]: In onreply, message: SIP/2.0 100 Trying^M Via: SIP/2.0/UDP IP_MASKED;branch=z9hG4bK9221.886b3817.0;received=IP_MASKED;rport=5060^M Via: SIP/2.0/UDP 10.10.11.10:7091;received=ORIGINATOR_IP;rport=8026;branch=z9hG4bK2127028508^M Record-Route: <sip:IP_MASKED;lr=on;ftag=2128765320;nat=yes>^M From: <sip:dan@sip.itsyscom.com>;tag=2128765320^M To: <sip:INT_NUMBER_MASKED@sip.itsyscom.com>^M Call-ID: 886593274(a)10.10.11.10^M CSeq: 21 INVITE^M Server: GlobalE SoftSWITCH/1.3.0.^M Content-Length: 0^M ^M Dec 20 10:07:53 ellie /usr/local/sbin/openser[15296]: ENTERING ON REPLY ROUTE Dec 20 10:07:53 ellie /usr/local/sbin/openser[15296]: First branch: <null>, all branches: <null>, flags set: 0 , branch flags: 0 Dec 20 10:07:53 ellie /usr/local/sbin/openser[15296]: In onreply, message: SIP/2.0 180 Ringing^M Via: SIP/2.0/UDP IP_MASKED;branch=z9hG4bK9221.886b3817.0;received=IP_MASKED;rport=5060^M Via: SIP/2.0/UDP 10.10.11.10:7091;received=ORIGINATOR_IP;rport=8026;branch=z9hG4bK2127028508^M Record-Route: <sip:IP_MASKED;lr=on;ftag=2128765320;nat=yes>^M From: <sip:dan@sip.itsyscom.com>;tag=2128765320^M To: <sip:INT_NUMBER_MASKED@sip.itsyscom.com>;tag=975999519^M Call-ID: 886593274(a)10.10.11.10^M CSeq: 21 INVITE^M Server: GlobalE SoftSWITCH/1.3.0.^M Contact: <sip:INT_NUMBER_MASKED@IP_MASKED:5070>^M Allow: ACK, INVITE, BYE, CANCEL, OPTIONS^M Content-Type: application/sdp^M Content-Length: 187^M ^M v=0^M o=yate 1198145273 1198145273 IN IP4 208.50.127.243^M s=SIP Call^M c=IN IP4 208.50.127.243^M t=0 0^M m=audio 23166 RTP/AVP 8 101^M a=rtpmap:8 PCMA/8000^M a=rtpmap:101 telephone-event/8000^M Can any of you help me troubleshooting this? I get the feeling that there is no transaction matched by openser for the replies. Version I am using (compiled from sources, with some params modified in configure.h): openser -V version: openser 1.2.2-tls (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: 2:3368M @(#) $Id: main.c 3173 2007-11-20 08:26:35Z bogdan_iancu $ Thxs in advance for any help. DanB

2 2

[Serusers] SER To Address
by Arun Kumar 20 Dec '07

20 Dec '07

Hi, When I send calls to PSTN the From filed is my user@SER IP is correct but in To Filed I want Number@ProviderIP but SER send Number@SERIP ? Thanks, Arun

1 0

Re: [OpenSER-Users] Openser and Nokia E61
by David Villasmil Govea 19 Dec '07

19 Dec '07

Ravi or Juha, if you've connected E61 succesfully, could you post the parameters here? I just can't... Thanks a lot David

3 2

Re: [OpenSER-Users] What is the difference?
by David Villasmil Govea 19 Dec '07

19 Dec '07

> > > El Wednesday 19 December 2007 13:20:07 I?aki Baz Castillo escribi?: > > El Wednesday 19 December 2007 13:15:35 David Villasmil Govea escribi?: > > > What's the difference between > > > > > > setbflag and setflag > > > ?? > > > > http://www.openser.org/dokuwiki/doku.php/utils:flags > > Note that if you use setbflag into a "route" you set the bflag for ALL the > branches (there could be more than one branch because pararell forking and > so). > > If you want to set bflag just for a branch you should use "setbflag" > into "branch_route". > > And NEVER do "isbflagset" into a "route" since the result can be > unexpectable > (if a branch has that bflag active and other one not active, "isbflagset" > in "route" could return 1 or 0 depending on which branch examinates > before). > > I ask, because i had this cfg file that was working perfectly with nat/rtpproxy. I replace it with a new cfg that was using bflag instead of flag. client-rtpproxy-client rtps stopped working. When i replace those bflags with regular flags it started working again!... Also, as i read there, "per branch" means each location... talking about location, is there a reason a client would have 98 almost exactly alike locations? but for the id, they're the same... weird. And i started seeing lots of "max branch exceeded" on the syslog. We do not limit branches because a client could have his softphone and ata logged in... thanks a lot

2 1

[OpenSER-Users] Problems with presence
by Jon Farmer 19 Dec '07

19 Dec '07

Hi I am trying to get presence working and getting the following error. Can anyone suggest what it wrong? I am using openser 1.2.2 notls and xlite and eyebeam for testing. Dec 19 17:11:47 esosser openser[22325]: PRESENCE: generate_ETag: etag= a.1198083751.22325.1 / 20 Dec 19 17:11:47 esosser openser[22325]: PRESENCE: handle_publish: No E-Tag and no body present Dec 19 17:11:47 esosser openser[22325]: PRESENCE: handle_publish: ERROR occured Regards Jon __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com

1 0

[OpenSER-Users] SoftPhone with CPL script upload support
by Martin Kardi 19 Dec '07

19 Dec '07

Hi, I try find some softphone with uploading CPL scripts support? Please advise me somebody. Thanks Martin -- View this message in context: http://www.nabble.com/SoftPhone-with-CPL-script-upload-support-tp14419452p1… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

3 2

[OpenSER-Users] ERROR:avp:add_avp: no more shm mem
by Marc LEURENT 19 Dec '07

19 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Morning Dan and Good Morning everybody, I've got Freeradius 1.1.7 + (python module enable + rlm_digest patches) OpenSER 1.2.2 + (Radius ACC enable) CDRTool 5.3.2 and I don't understand these outputs... OpenSER is crashing after receiving Authorization from Freeradius... Any idea?? Freeradius sent AVP to OpenSER: SIP-AVP = "callMaxDur:2957" SIP-AVP = "credit:10.0000" SIP-AVP = "authentic#1" And openser is trying to parse it but the there is a problem... 2(30175) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 2(30175) DEBUG:auth_radius:extract_avp: string is <ur:2957> 2(30175) DEBUG:auth_radius:extract_avp: AVP name is <ur> 2(30175) DEBUG:auth_radius:extract_avp: AVP val is <2957> 2(30175) ERROR:avp:add_avp: no more shm mem 2(30175) ERROR:auth_radius:generate_avps: Unable to create a new AVP 10(30190) ERROR: receive_fd: EOF on 6 Thanks ### Small Freeradius output ### A2 = INVITE:sip:0677832974@sip.wifirst.net H(A1) = b82eaab7b4eaab2db812d3a2695f0e22 H(A2) = 83134a8c6b9ea1a20de012abf16e87f5 KD = b82eaab7b4eaab2db812d3a2695f0e22:47679476280e04ea50ded04b24f7d3f75068eea7:83134a8c6b9ea1a20de012abf16e87f5 EXPECTED 40ed14d07aa16035e67c21886a802379 RECEIVED 40ed14d07aa16035e67c21886a802379 modcall[authenticate]: module "digest" returns ok for request 71 modcall: leaving group authenticate (returns ok) for request 71 Login OK: [mleurent(a)sip.wifirst.net/<no User-Password attribute>] (from client private port 5060) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 71 rlm_sql (sql): Processing sql_postauth radius_xlat: 'mleurent(a)sip.wifirst.net' rlm_sql (sql): sql_set_user escaped user --> 'mleurent(a)sip.wifirst.net' radius_xlat: 'INSERT into radpostauth (id, user, pass, reply, date) values ('', 'mleurent(a)sip.wifirst.net', 'Chap-Password', 'Access-Accept', NOW())' rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, pass, reply, date) values ('', 'mleurent(a)sip.wifirst.net', 'Chap-Password', 'Access-Accept', NOW()) rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 modcall[post-auth]: module "sql" returns ok for request 71 modcall: leaving group post-auth (returns ok) for request 71 Sending Access-Accept of id 180 to 172.24.0.8 port 47861 SIP-AVP = "callMaxDur:2957" SIP-AVP = "credit:10.0000" SIP-AVP = "authentic#1" Finished request 71 Going to the next request - --- Walking the entire request list --- Waking up in 6 seconds... ### Full OpenSER output ### 2(30175) SIP Request: 2(30175) method: <INVITE> 2(30175) uri: <sip:0677832974@sip.wifirst.net> 2(30175) version: <SIP/2.0> 2(30175) parse_headers: flags=2 2(30175) get_hdr_field: cseq <CSeq>: <2> <INVITE> 2(30175) Found param type 232, <branch> = <z9hG4bK3c2eaf3d-baab-dc11-90b2-ed571fe4ba74>; state=6 2(30175) Found param type 235, <rport> = <n/a>; state=17 2(30175) end of header reached, state=5 2(30175) parse_headers: Via found, flags=2 2(30175) parse_headers: this is the first via 2(30175) After parse_msg... 2(30175) preparing to run routing scripts... 2(30175) parse_headers: flags=100 2(30175) DEBUG:parse_to:end of header reached, state=10 2(30175) DBUG:parse_to: display={}, ruri={sip:0677832974@sip.wifirst.net} 2(30175) DEBUG: get_hdr_field: <To> [34]; uri=[sip:0677832974@sip.wifirst.net] 2(30175) DEBUG: to body [<sip:0677832974@sip.wifirst.net> ] 2(30175) DEBUG: get_hdr_body : content_length=235 2(30175) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(30175) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 50 2(30175) !!!! STARTING ROUTE 2: TEST NAT 2(30175) !!!!!!!!! YAHH NAT DETECTED - FIXING CONTACT!!!!!!!!!!!!! 2(30175) parse_headers: flags=80 2(30175) DEBUG: add_param: tag=2eb08b3d-baab-dc11-90b2-ed571fe4ba74 2(30175) DEBUG:parse_to:end of header reached, state=29 2(30175) DBUG:parse_to: display={"Marc LEURENT"}, ruri={sip:mleurent@sip.wifirst.net} 2(30175) parse_headers: flags=200 2(30175) found end of header 2(30175) find_first_route: No Route headers found 2(30175) loose_route: There is no Route HF 2(30175) grep_sock_info - checking if host==us: 15==12 && [sip.wifirst.net] == [213.91.4.219] 2(30175) grep_sock_info - checking if port 5060 matches port 5060 2(30175) JUSTE BEFORE SETTING FLAGS FOR RADIUS 2(30175) DEBUG: has_totag: no totag 2(30175) I AM SETTING THE FLAGS FOR RADIUS 2(30175) SETTING FLAGS 1 FOR RADIUS 2(30175) SETTING FLAGS 2 FOR RADIUS 2(30175) grep_sock_info - checking if host==us: 15==12 && [sip.wifirst.net] == [213.91.4.219] 2(30175) grep_sock_info - checking if port 5060 matches port 5060 2(30175) grep_sock_info - checking if host==us: 15==12 && [sip.wifirst.net] == [213.91.4.219] 2(30175) grep_sock_info - checking if port 5060 matches port 5060 2(30175) check_nonce(): comparing [47679476280e04ea50ded04b24f7d3f75068eea7] and [47679476280e04ea50ded04b24f7d3f75068eea7] 2(30175) DEBUG:auth_radius:radius_authorize_sterman: Success 2(30175) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 2(30175) DEBUG:auth_radius:extract_avp: string is <ur:2957> 2(30175) DEBUG:auth_radius:extract_avp: AVP name is <ur> 2(30175) DEBUG:auth_radius:extract_avp: AVP val is <2957> 2(30175) ERROR:avp:add_avp: no more shm mem 2(30175) ERROR:auth_radius:generate_avps: Unable to create a new AVP 10(30190) ERROR: receive_fd: EOF on 6 10(30190) DBG: handle_ser_child: dead child 2, pid 30175 (shutting down?) 10(30190) DBG: io_watch_del (0x5b5c20, 6, -1, 0x0) fd_no=13 called 0(30173) child process 30175 exited by a signal 11 0(30173) core was generated 0(30173) INFO: terminating due to SIGCHLD 4(30177) INFO: signal 15 received 4(30177) Memory status (pkg): 4(30177) fm_status (0x5f6d80): 4(30177) heap size= 1048576 4(30177) used= 77952, used+overhead=122432, free=926144 4(30177) max used (+overhead)= 129560 4(30177) dumping free list: 4(30177) hash = 1 fragments no.: 4, unused: 0 bucket size: 8 - 8 (first 8) 4(30177) hash = 2 fragments no.: 6, unused: 0 bucket size: 16 - 16 (first 16) 4(30177) hash = 3 fragments no.: 4, unused: 0 bucket size: 24 - 24 (first 24) 4(30177) hash = 4 fragments no.: 1, unused: 0 bucket size: 32 - 32 (first 32) 4(30177) hash = 5 fragments no.: 1, unused: 0 bucket size: 40 - 40 (first 40) 4(30177) hash = 6 fragments no.: 4, unused: 0 bucket size: 48 - 48 (first 48) 4(30177) hash = 7 fragments no.: 25, unused: 0 bucket size: 56 - 56 (first 56) 4(30177) hash = 8 fragments no.: 6, unused: 0 bucket size: 64 - 64 (first 64) 4(30177) hash = 9 fragments no.: 14, unused: 0 bucket size: 72 - 72 (first 72) 4(30177) hash = 10 fragments no.: 2, unused: 0 bucket size: 80 - 80 (first 80) 4(30177) hash = 11 fragments no.: 1, unused: 0 bucket size: 88 - 88 (first 88) 4(30177) hash = 15 fragments no.: 1, unused: 0 bucket size: 120 - 120 (first 120) 4(30177) hash = 28 fragments no.: 1, unused: 0 bucket size: 224 - 224 (first 224) 4(30177) hash = 29 fragments no.: 1, unused: 0 bucket size: 232 - 232 (first 232) 4(30177) hash = 52 fragments no.: 2, unused: 0 bucket size: 416 - 416 (first 416) 4(30177) hash = 62 fragments no.: 1, unused: 0 bucket size: 496 - 496 (first 496) 4(30177) hash = 64 fragments no.: 1, unused: 0 bucket size: 512 - 512 (first 512) 4(30177) hash = 65 fragments no.: 1, unused: 0 bucket size: 520 - 520 (first 520) 4(30177) hash = 146 fragments no.: 1, unused: 0 bucket size: 1168 - 1168 (first 1168) 4(30177) hash = 176 fragments no.: 1, unused: 0 bucket size: 1408 - 1408 (first 1408) 4(30177) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 917296) 4(30177) TOTAL: 79 free fragments = 926336 free bytes 4(30177) ----------------------------- 5(30178) INFO: signal 15 received 5(30178) Memory status (pkg): 5(30178) fm_status (0x5f6d80): 5(30178) heap size= 1048576 5(30178) used= 77776, used+overhead=121040, free=927536 5(30178) max used (+overhead)= 121504 5(30178) dumping free list: 5(30178) hash = 2 fragments no.: 1, unused: 0 bucket size: 16 - 16 (first 16) 5(30178) hash = 41 fragments no.: 1, unused: 0 bucket size: 328 - 328 (first 328) 5(30178) hash = 55 fragments no.: 1, unused: 0 bucket size: 440 - 440 (first 440) 5(30178) hash = 56 fragments no.: 1, unused: 0 bucket size: 448 - 448 (first 448) 5(30178) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 926496) 5(30178) TOTAL: 5 free fragments = 927728 free bytes 5(30178) ----------------------------- 1(30174) INFO: signal 15 received 1(30174) Memory status (pkg): 1(30174) fm_status (0x5f6d80): 1(30174) heap size= 1048576 3(30176) INFO: signal 15 received 3(30176) Memory status (pkg): 3(30176) fm_status (0x5f6d80): 3(30176) heap size= 1048576 3(30176) used= 77936, used+overhead=122400, free=926176 3(30176) max used (+overhead)= 129576 3(30176) dumping free list: 3(30176) hash = 1 fragments no.: 6, unused: 0 bucket size: 8 - 8 (first 8) 3(30176) hash = 2 fragments no.: 4, unused: 0 bucket size: 16 - 16 (first 16) 3(30176) hash = 3 fragments no.: 1, unused: 0 bucket size: 24 - 24 (first 24) 3(30176) hash = 4 fragments no.: 2, unused: 0 bucket size: 32 - 32 (first 32) 3(30176) hash = 6 fragments no.: 3, unused: 0 bucket size: 48 - 48 (first 48) 3(30176) hash = 7 fragments no.: 24, unused: 0 bucket size: 56 - 56 (first 56) 3(30176) hash = 8 fragments no.: 3, unused: 0 bucket size: 64 - 64 (first 64) 3(30176) hash = 9 fragments no.: 16, unused: 0 bucket size: 72 - 72 (first 72) 3(30176) hash = 10 fragments no.: 4, unused: 0 bucket size: 80 - 80 (first 80) 1(30174) used= 77992, used+overhead=122472, free=926104 1(30174) max used (+overhead)= 129696 1(30174) dumping free list: 1(30174) hash = 1 fragments no.: 6, unused: 0 bucket size: 8 - 8 (first 8) 1(30174) hash = 2 fragments no.: 5, unused: 0 bucket size: 16 - 16 (first 16) 1(30174) hash = 3 fragments no.: 3, unused: 0 bucket size: 24 - 24 (first 24) 1(30174) hash = 6 fragments no.: 6, unused: 0 bucket size: 48 - 48 (first 48) 1(30174) hash = 7 fragments no.: 29, unused: 0 bucket size: 56 - 56 (first 56) 1(30174) hash = 8 fragments no.: 3, unused: 0 bucket size: 64 - 64 (first 64) 1(30174) hash = 9 fragments no.: 16, unused: 0 bucket size: 72 - 72 (first 72) 1(30174) hash = 11 fragments no.: 2, unused: 0 bucket size: 88 - 88 (first 88) 1(30174) hash = 19 fragments no.: 1, unused: 0 bucket size: 152 - 152 (first 152) 1(30174) hash = 28 fragments no.: 1, unused: 0 bucket size: 224 - 224 (first 224) 1(30174) hash = 29 fragments no.: 1, unused: 0 bucket size: 232 - 232 (first 232) 1(30174) hash = 52 fragments no.: 2, unused: 0 bucket size: 416 - 416 (first 416) 1(30174) hash = 96 fragments no.: 1, unused: 0 bucket size: 768 - 768 (first 768) 1(30174) hash = 150 fragments no.: 1, unused: 0 bucket size: 1200 - 1200 (first 1200) 1(30174) hash = 176 fragments no.: 1, unused: 0 bucket size: 1408 - 1408 (first 1408) 1(30174) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 917848) 1(30174) TOTAL: 79 free fragments = 926296 free bytes 1(30174) ----------------------------- 3(30176) hash = 13 fragments no.: 1, unused: 0 bucket size: 104 - 104 (first 104) 3(30176) hash = 14 fragments no.: 1, unused: 0 bucket size: 112 - 112 (first 112) 3(30176) hash = 15 fragments no.: 1, unused: 0 bucket size: 120 - 120 (first 120) 3(30176) hash = 28 fragments no.: 2, unused: 0 bucket size: 224 - 224 (first 224) 3(30176) hash = 29 fragments no.: 1, unused: 0 bucket size: 232 - 232 (first 232) 3(30176) hash = 52 fragments no.: 2, unused: 0 bucket size: 416 - 416 (first 416) 3(30176) hash = 58 fragments no.: 1, unused: 0 bucket size: 464 - 464 (first 464) 3(30176) hash = 59 fragments no.: 1, unused: 0 bucket size: 472 - 472 (first 472) 3(30176) hash = 102 fragments no.: 1, unused: 0 bucket size: 816 - 816 (first 816) 3(30176) hash = 122 fragments no.: 1, unused: 0 bucket size: 976 - 976 (first 976) 3(30176) hash = 128 fragments no.: 1, unused: 0 bucket size: 1024 - 1024 (first 1024) 3(30176) hash = 176 fragments no.: 1, unused: 0 bucket size: 1408 - 1408 (first 1408) 3(30176) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 916008) 3(30176) TOTAL: 78 free fragments = 926368 free bytes 3(30176) ----------------------------- 10(30190) INFO: signal 15 received 10(30190) Memory status (pkg): 10(30190) fm_status (0x5f6d80): 10(30190) heap size= 1048576 10(30190) used= 127600, used+overhead=170816, free=877760 10(30190) max used (+overhead)= 170816 10(30190) dumping free list: 10(30190) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 877952) 10(30190) TOTAL: 1 free fragments = 877952 free bytes 10(30190) ----------------------------- 9(30188) INFO: signal 15 received 9(30188) Memory status (pkg): 9(30188) fm_status (0x5f6d80): 9(30188) heap size= 1048576 9(30188) used= 135792, used+overhead=179024, free=869552 9(30188) max used (+overhead)= 179024 9(30188) dumping free list: 9(30188) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 869744) 9(30188) TOTAL: 1 free fragments = 869744 free bytes 9(30188) ----------------------------- 6(30181) INFO: signal 15 received 6(30181) Memory status (pkg): 6(30181) fm_status (0x5f6d80): 6(30181) heap size= 1048576 6(30181) used= 135792, used+overhead=179024, free=869552 6(30181) max used (+overhead)= 179024 6(30181) dumping free list: 6(30181) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 869744) 6(30181) TOTAL: 1 free fragments = 869744 free bytes 6(30181) 8(30185) INFO: signal 15 received 8(30185) Memory status (pkg): 8(30185) fm_status (0x5f6d80): 8(30185) heap size= 1048576 8(30185) used= 135792, used+overhead=179024, free=869552 8(30185) max used (+overhead)= 179024 8(30185) dumping free list: 8(30185) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 869744) 8(30185) TOTAL: 1 free fragments = 869744 free bytes 8(30185) ----------------------------- - ----------------------------- 7(30182) INFO: signal 15 received 7(30182) Memory status (pkg): 7(30182) fm_status (0x5f6d80): 7(30182) heap size= 1048576 7(30182) used= 135792, used+overhead=179024, free=869552 7(30182) max used (+overhead)= 179024 7(30182) dumping free list: 7(30182) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 869744) 7(30182) TOTAL: 1 free fragments = 869744 free bytes 7(30182) ----------------------------- 1(30174) INFO: signal 15 received 1(30174) Memory status (pkg): 1(30174) fm_status (0x5f6d80): 1(30174) heap size= 1048576 1(30174) used= 85664, used+overhead=128704, free=919872 1(30174) max used (+overhead)= 128704 1(30174) dumping free list: 1(30174) hash = 11 fragments no.: 1, unused: 0 bucket size: 88 - 88 (first 88) 1(30174) hash = 42 fragments no.: 1, unused: 0 bucket size: 336 - 336 (first 336) 1(30174) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 919640) 1(30174) TOTAL: 3 free fragments = 920064 free bytes 1(30174) ----------------------------- 0(30173) pool_remove: Connection still kept in the pool 0(30173) pool_remove: Connection still kept in the pool 0(30173) XLOG: destroy module ... 0(30173) pool_remove: Removing connection from the pool 0(30173) pool_remove: Connection still kept in the pool 0(30173) INFO:mi_fifo:mi_destroy: seems that fifo child is already dead! 0(30173) pool_remove: Removing connection from the pool 0(30173) DEBUG: tm_shutdown : start 0(30173) DEBUG: unlink_timer_lists : emptying DELETE list 0(30173) DEBUG: tm_shutdown : emptying hash table 0(30173) DEBUG: tm_shutdown : releasing timers 0(30173) DEBUG: tm_shutdown : removing semaphores 0(30173) DEBUG: tm_shutdown : destroying tmcb lists 0(30173) DEBUG: tm_shutdown : done 0(30173) Memory status (pkg): 0(30173) fm_status (0x5f6d80): 0(30173) heap size= 1048576 0(30173) used= 56464, used+overhead=99648, free=948928 0(30173) max used (+overhead)= 112768 0(30173) dumping free list: 0(30173) hash = 1 fragments no.: 7, unused: 0 bucket size: 8 - 8 (first 8) 0(30173) hash = 2 fragments no.: 3, unused: 0 bucket size: 16 - 16 (first 16) 0(30173) hash = 3 fragments no.: 7, unused: 0 bucket size: 24 - 24 (first 24) 0(30173) hash = 4 fragments no.: 33, unused: 0 bucket size: 32 - 32 (first 32) 0(30173) hash = 6 fragments no.: 9, unused: 0 bucket size: 48 - 48 (first 48) 0(30173) hash = 7 fragments no.: 5, unused: 0 bucket size: 56 - 56 (first 56) 0(30173) hash = 8 fragments no.: 1, unused: 0 bucket size: 64 - 64 (first 64) 0(30173) hash = 9 fragments no.: 2, unused: 0 bucket size: 72 - 72 (first 72) 0(30173) hash = 12 fragments no.: 9, unused: 0 bucket size: 96 - 96 (first 96) 0(30173) hash = 13 fragments no.: 1, unused: 0 bucket size: 104 - 104 (first 104) 0(30173) hash = 14 fragments no.: 3, unused: 0 bucket size: 112 - 112 (first 112) 0(30173) hash = 21 fragments no.: 2, unused: 0 bucket size: 168 - 168 (first 168) 0(30173) hash = 156 fragments no.: 2, unused: 0 bucket size: 1248 - 1248 (first 1248) 0(30173) hash = 842 fragments no.: 1, unused: 0 bucket size: 6736 - 6736 (first 6736) 0(30173) hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 936000) 0(30173) TOTAL: 86 free fragments = 949120 free bytes 0(30173) ----------------------------- 0(30173) Memory status (shm): 0(30173) fm_status (0x2ab19f9d0000): 0(30173) heap size= 33554432 0(30173) used= 144, used+overhead=36720, free=33517712 0(30173) max used (+overhead)= 2746832 0(30173) dumping free list: 0(30173) hash = 1 fragments no.: 56, unused: 0 bucket size: 8 - 8 (first 8) 0(30173) hash = 2 fragments no.: 12, unused: 0 bucket size: 16 - 16 (first 16) 0(30173) hash = 3 fragments no.: 9, unused: 0 bucket size: 24 - 24 (first 24) 0(30173) hash = 4 fragments no.: 10, unused: 0 bucket size: 32 - 32 (first 32) 0(30173) hash = 5 fragments no.: 3, unused: 0 bucket size: 40 - 40 (first 40) 0(30173) hash = 6 fragments no.: 4, unused: 0 bucket size: 48 - 48 (first 48) 0(30173) hash = 7 fragments no.: 47, unused: 0 bucket size: 56 - 56 (first 56) 0(30173) hash = 8 fragments no.: 3, unused: 0 bucket size: 64 - 64 (first 64) 0(30173) hash = 9 fragments no.: 6, unused: 0 bucket size: 72 - 72 (first 72) 0(30173) hash = 10 fragments no.: 2, unused: 0 bucket size: 80 - 80 (first 80) 0(30173) hash = 12 fragments no.: 1, unused: 0 bucket size: 96 - 96 (first 96) 0(30173) hash = 15 fragments no.: 1, unused: 0 bucket size: 120 - 120 (first 120) 0(30173) hash = 17 fragments no.: 1, unused: 0 bucket size: 136 - 136 (first 136) 0(30173) hash = 21 fragments no.: 5, unused: 0 bucket size: 168 - 168 (first 168) 0(30173) hash = 22 fragments no.: 1, unused: 0 bucket size: 176 - 176 (first 176) 0(30173) hash = 35 fragments no.: 1, unused: 0 bucket size: 280 - 280 (first 280) 0(30173) hash = 76 fragments no.: 1, unused: 0 bucket size: 608 - 608 (first 608) 0(30173) hash = 104 fragments no.: 1, unused: 0 bucket size: 832 - 832 (first 832) 0(30173) hash = 110 fragments no.: 1, unused: 0 bucket size: 880 - 880 (first 880) 0(30173) hash = 112 fragments no.: 1, unused: 0 bucket size: 896 - 896 (first 896) 0(30173) hash = 128 fragments no.: 2, unused: 0 bucket size: 1024 - 1024 (first 1024) 0(30173) hash = 150 fragments no.: 1, unused: 0 bucket size: 1200 - 1200 (first 1200) 0(30173) hash = 193 fragments no.: 1, unused: 0 bucket size: 1544 - 1544 (first 1544) 0(30173) hash = 224 fragments no.: 1, unused: 0 bucket size: 1792 - 1792 (first 1792) 0(30173) hash = 258 fragments no.: 2, unused: 0 bucket size: 2064 - 2064 (first 2064) 0(30173) hash = 727 fragments no.: 1, unused: 0 bucket size: 5816 - 5816 (first 5816) 0(30173) hash = 831 fragments no.: 1, unused: 0 bucket size: 6648 - 6648 (first 6648) 0(30173) hash = 1024 fragments no.: 2, unused: 0 bucket size: 8192 - 8192 (first 8192) 0(30173) hash = 2049 fragments no.: 2, unused: 0 bucket size: 16384 - 32768 (first 20480) 0(30173) hash = 2056 fragments no.: 1, unused: 0 bucket size: 2097152 - 4194304 (first 2621440) 0(30173) hash = 2059 fragments no.: 1, unused: 0 bucket size: 16777216 - 33554432 (first 30805984) 0(30173) TOTAL: 181 free fragments = 33517712 free bytes 0(30173) ----------------------------- 0(30173) shm_mem_destroy 0(30173) destroying the shared memory lock 0(30173) terminating due to SIGCHLD -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHZ5doN4+o+2LtdFwRAknyAKCXJHhyHZlAooGoyONmFphFcZE3BgCfbJOO aN4wxnGPjLgxqVvx5YTgGac= =pkmq -----END PGP SIGNATURE-----

3 5

[Serusers] Newbie Problems: MySQL support in SER
by frq ser 19 Dec '07

19 Dec '07

Hi, Further to my previous email, there is another problem for which I need help. While trying to add MySQL support, I could not find the file src/sip_router/Makefile (as asked in the Getting started document (http://siprouter.onsip.org/doc/gettingstarted/ch11s05.html). The Makefile for the SER in the base directory (/lhome/.../ser/Makefile) does not refer to MySQL in the exclude_modules line (Note the ? after exclude_modules). Here is the excerpt from the Makefile: # if not set on the cmd. line or the env, exclude this modules: exclude_modules?= cpl ext extcmd \ postgres snmp \ im \ jabber mysql \ cpl-c \ auth_radius group_radius uri_radius avp_radius \ pa Does that mean that MySQL is already installed? How can I check if MySQL is already installed on my machine? I also found the following code in the Makefile but I am not sure what it means. .PHONY: dbinstall dbinstall: -@echo "Initializing ser database" scripts/ser_mysql.sh create -@echo "Done" . . . I'd be very grateful if anyone could help. Frq

1 1

[OpenSER-Users] Res: FIFO / SEMS
by Bruno Machado 19 Dec '07

19 Dec '07

Great job, Iancu. It is what I really needed. I tried to use the 'dialog' module and the session was torn down without any problems. Perfect. I have just one more question. I would like to log the generated BYE in ACC. Is it possible when OpenSER receive this BYE request from FIFO? Thanks a lot again bruno ----- Mensagem original ---- De: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> Para: Bruno Machado <bsmufu(a)yahoo.com.br> Cc: users(a)lists.openser.org Enviadas: Segunda-feira, 17 de Dezembro de 2007 11:19:29 Assunto: Re: [OpenSER-Users] FIFO / SEMS Hi Bruno, In OpenSER 1.3 "BlackCat", the "dialog" module provides a way to terminate an ongoing dialog. See the generic docs: http://www.openser.org/docs/modules/1.3.x/dialog.html and about sending BYEs: http://www.openser.org/docs/modules/1.3.x/dialog.html#AEN461 Regards, bogdan Bruno Machado wrote: > Hi all > > I am reading about FIFO and I am wandering in my thoughts, searching > for a solution > that tear down a session. I don't want to use Asterisk anymore for > this purpose. > Can I send a BYE message through FIFO? Should I use "t_uac_dlg"? I was > reading > about "t_uac_cancel" but it generates a CANCEL and, of course, it > won't resolve the problem. > > I didn't install SEMS yet. So, I would like to know if someone uses > this software > (OpenSER + SEMS) within this purpose. This link: > > http://svn.berlios.de/wsvn/sems/trunk/doc/Readme.sw_prepaid_sip?op=file&rev… > <http://svn.berlios.de/wsvn/sems/trunk/doc/Readme.sw_prepaid_sip?op=file&rev…> > > has this: > > "When the call duration exceeds the credit, the call is terminated by > SEMS." > > > So, I can realize it sends a BYE to OpenSER through FIFO and it will be > forwarded to the voip devices. Am I right? I will try to use the > 't_uac_dlg' now. > Any comments are welcome. > > Cheers > Bruno Machado > > > > ------------------------------------------------------------------------ > Abra sua conta no Yahoo! Mail > <http://br.rd.yahoo.com/mail/taglines/mail/*http://br.mail.yahoo.com/>, > o único sem limite de espaço para armazenamento! > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento! http://br.mail.yahoo.com/

1 0

[OpenSER-Users] Openser-1.3 packages are ready in Fedora testing repository
by Jan ONDREJ (SAL) 19 Dec '07

19 Dec '07

Hello, i am pleased to announce, that OpenSER has been approved as a part of Fedora distribution. openser-1.3.0 is ready in fedora-7-testing and fedora-8-testing repository. It will be moved to stable after aprox. a week. If you have openser < 1.3.0 installed on your fedora or EPEL, please turn off your automatic updates or update it manually before the final release. Follow these steps to update: read upgrading guide at: http://openser.org/dokuwiki/doku.php/install:1.2.2-to-1.3.0 run this command: yum --enablerepo=updates-testing update 'openser*' check your configuration files and just then restart openser Jan ONDREJ (SAL) PS: I am not a member of this mailinglist. If you wish to reply, please send email directly to me.

1 0

[OpenSER-Users] What is the difference?
by David Villasmil Govea 19 Dec '07

19 Dec '07

What's the difference between setbflag and setflag ?? Thanks David

2 2

[OpenSER-Users] Openser and Nokia E61
by David Villasmil Govea 19 Dec '07

19 Dec '07

Hello all, Anyone know how to connect a nokia e61 to openser? I've configured it to connect to asterisk and no problem whatsoever.... but seems impossible to connect to openser 1.2 Cheers David

3 2

[OpenSER-Users] need Help in TLS Problem in openser 1.3 Black CAT
by raviprakash sunkara 19 Dec '07

19 Dec '07

Hello Users Merry XMAS Resently I installed and Configure the openser 1.3 with TLS Support in FC6 with openSSL 0.9.8b Am Trying implementing the TLS of my OpenSER proxy First I trying TLS for Registering to My OpenSER Proxy Server. The Certificatation am using the default while in installing the openser 1.3 Am using eyebeam 1.5 with TLS. on the Screen am getting 503 service unavilable I don't know what happening in Server side. Please Help in this . -- Thanks &Regards Ravi Prakash Sunkara VoIP Development Tech Lead.

2 1

[OpenSER-Users] error_route not working
by Jayesh Nambiar 19 Dec '07

19 Dec '07

Hi All, I am using openser 1.3. Yesterday I added the error_route in my script to handle the parsing errors. But I see that the script logic is not going into error_route and I still see the message log filled up with messages like below: INFO:core:parse_first_line: bad message Dec 19 08:02:17 sw1 /usr/local/sbin/openser[26964]: ERROR:core:parse_msg: message=<INVITE sip:61: 394086416(a)207.251.84.106 SIP/2.0 If the error route is present in the script should'nt the script go to the error route in the case like above? My error_route is as follows: error_route { xlog("--- error route class=$(err.class) level=$(err.level) info=$(err.info) rcode=$(err.rcode) rreason=$(err.rreason) ---\n"); xlog("--- error from [$si:$sp]\n+++++\n$mb\n++++\n"); sl_send_reply("$err.rcode", "$err.rreason"); exit; } Can somebody give me some pointers on why error_route is not working in this case or am I missing something. Thanks in advance w/regards, Jayesh Save all your chat conversations. Find them online at http://in.messenger.yahoo.com/webmessengerpromo.php

1 0

[Serusers] nat problem
by Pezhman Lali 19 Dec '07

19 Dec '07

Dear I have a lot of problems with nat and registering, for example, grandstream does not work with a lot of internet providers, also linksys and ... sometimes the sip phone was registered, but the call is one way or no way. please help me, if my config has problem. Best Mani listen=1.1.1.1 debug=0 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL5 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="postgres://postgres:mypass@localhost:5432/test" alias="xxx.com" alias="xxx.com" alias="xxx.com" alias="xxx.com" alias="xxx.com" sip_warning=yes # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/postgres.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" loadmodule "/usr/local/lib/ser/modules/uri.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("acc", "log_level", 1) #modparam("acc", "log_flag", 1) modparam("acc", "db_url", "postgres://postgres:mypass@localhost:5432/test") modparam("acc", "db_missed_flag", 2) modparam("acc", "db_flag", 1) #modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("usrloc", "db_mode", 1) modparam("usrloc", "user_column", "user_id") modparam("usrloc", "db_url", "postgres://postgres:mypass@localhost:5432/test") # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) modparam("auth_db", "use_domain", 0) modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "user_column", "user_id") modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "postgres://postgres:mypass@localhost:5432/test") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("rr", "enable_double_rr", 0) modparam("registrar", "nat_flag", 6) modparam("registrar", "use_domain", 0) modparam("usrloc", "use_domain", 0) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT modparam("nathelper", "rtpproxy_sock","unix:/var/run/rtpproxy.sock") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (method=="INVITE" || method=="BYE" || method=="ACK") { setflag(1); }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); break; }; if (method == "INVITE") { # if (!lookup("location")) { # xlog("L_ERR","%Tf: Rejecting %ru From %fu To %tu \n"); # sl_send_reply("404", "Not Registered"); # break; # }; if (!uri =~ "sip:43[0-9]{6}@*") { log(1, "Forwarding to Asterisk\n"); forward(2.2.2.2,5060); break; } } # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("xxx.com", "subscriber")) { www_challenge("xxx.com", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); #acc_db_request("404 missed call", "missed_calls"); break; }; setflag(2); }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

1 0

[Serusers] multi-domain support solution
by satish patel 19 Dec '07

19 Dec '07

Dear all I have solve my multidomain configuration with ser-0.9.6 and it is working fine for me and i am sending you my configuration for incomming users whos want do some stuff wid ser i have find many document on multi-support and i have consolidate all document and make my ser.cfg script or config cat /usr/local/etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=7 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.104.20 port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/call.so" #loadmodule "/usr/local/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 0) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("domain", "db_url", "mysql://root:mypasswd@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") modparam("usrloc|registrar|auth_db|avpops|group", "use_domain", 1) #modparam("usrloc", "use_domain", 1) #modparam("registrar", "use_domain", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) #-----------Multi-domain Logic work blow in stanza--------# if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); break; save("aliases"); break; }; #----Alias check--- # lookup("aliases"); # if (!uri==myself) { # route(1); # break; # }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #-----END---# Now to test configuration start ser #serctl start #serctl domain add abc.com #serctl add 222(a)abc.com tulip 222(a)abc.com #serctl add 333(a)abc.com tulip 333(a)abc.com this to user 222 and 333 for domain abc.com **Notes:- you should configure SRV recode on your DNS otherwise it will not work for you NOW configure your Xlite and try to call each other Then try to add new domain and do same thing which u have done before abc.com Thanks and Best of Luck $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- Meet people who discuss and share your passions. Join them now.

1 0

[Serusers] Fwd: Newbie Problems: ser.cfg
by frq ser 18 Dec '07

18 Dec '07

---------- Forwarded message ---------- From: frq ser <frq.ser(a)googlemail.com> Date: Dec 18, 2007 11:32 PM Subject: Newbie Problems: ser.cfg To: serusers(a)iptel.org Hi, I am trying to understand the process flow in the following ser.cfg file, which controls a SER proxy server at root@ip.address:5060. I have added "log()" command at almost every step to see how things proceed. The problem is that when I generate an OPTIONS message through SIPSAK (sipsak -T -vv -s sip:root@ip.address:5060), the process branches from route(0) to route(3), sends a message (200 Message received, probably from Sipsak), then comes back to route(0), completes this route, and then loops back to start of route(0) (as evident from the last log message "Inside main route..."). This is despite the "break" command in the main route block. Here's the output of the SER: [root@drone08 ~]# ser Listening on udp: 192.168.3.208 [192.168.3.208]:5060 tcp: 192.168.3.208 [192.168.3.208]:5060 Aliases: tcp: 192.168.3.208:5060 udp: 192.168.3.208:5060 WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 107520 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(0) INFO: fifo process starting: 5116 2(0) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 2(0) WARNING: no fifo_db_url given - fifo DB commands disabled! 0(5114) Inside the main route.... 0(5114) Inside the main route.... 0(5114) just passed the sanity checks... 0(5114) inside method-register... 0(5114) inside method-options... 0(5114) Inside route3... 0(5114) End of route3... 0(5114) just past redir-route3.. 0(5114) Inside the main route.... The corresponding SIPSAK output is: C:\..Sipsak>sipsak -v -T -s sip:root@192.168.3.208:5060 warning: IP extract from warning activated to be more informational 0: 192.168.3.208 (0.000 ms) SIP/2.0 483 Too Many Hops 1: 192.168.3.208 (0.000 ms) SIP/2.0 201 Options message received, probably from Sipsak without Contact header On the other hand, when I send an INVITE message, this problem doesn't happen. The process completes the main route and doesn't loop back (ie I don't get the "Inside the main route..." message). [root@drone08 ~]# ser Listening on udp: 192.168.3.208 [192.168.3.208]:5060 tcp: 192.168.3.208 [192.168.3.208]:5060 Aliases: tcp: 192.168.3.208:5060 udp: 192.168.3.208:5060 WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 107520 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(0) INFO: fifo process starting: 4860 2(0) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 2(0) WARNING: no fifo_db_url given - fifo DB commands disabled! 0(4858) Inside the main route.... 0(4858) just passed the sanity checks... 0(4858) inside method-register... 0(4858) outside methods-options... 0(4858) inside lookup-location... All I want to know is that when I send an OPTIONS msg, why the process doesn't terminate at the break command in the (if (method == "OPTIONS")) in the main route. Although it is not a critical problem, I just want to improve my understanding. I'll be glad if any of you could help. Fr. PS: The config file (ser.cfg) is given below: # $Id: hello-world.cfg 46 2006-01-25 04:21:30Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=3 fork=no log_stderror=yes listen= 192.168.3.208 #2.13 port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # chg_rsf dec07 #loadmodule "/usr/local/lib/ser/modules/textops.so" #loadmodule "/usr/local/lib/ser/modules/avpops.so" modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) #modparam("tm", "pass_provisional_replies", 1) route { log(1, "Inside the main route....\n"); # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; log(3, "just passed the sanity checks...\n"); # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method!="REGISTER") { record_route(); log(3, "inside method-register...\n"); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { log(3, "inside loose route...\n"); route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { log(3, "inside uri-myself...\n"); route(1); break; }; if (method=="ACK") { log(3, "inside method-ack...\n"); route(1); break; } else if (method=="REGISTER") { log(3, "inside method-register...\n"); route(2); break; }; if (method=="OPTIONS"){ log(3, "inside method-options...\n"); route(3); log(3, "just past redir-route3..\n"); break; log(3, "just past break...\n"); }; log(3, "outside methods-options...\n"); lookup("aliases"); if (uri!=myself) { log(3, "inside uri-myself 2....\n"); route(1); break; }; if (!lookup("location")) { log(3, "inside lookup-location...\n"); sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ log(3, "Inside route1...\n"); if (!t_relay()) { sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ log(3, "Inside route2...\n"); if (!save("location")) { #sl_reply_error(); sl_send_reply("201", "Register message received at Proxy Server"); }; } route[3]{ # ----------------------------------------------------------------------- # OPTIONS Message Handler # ----------------------------------------------------------------------- log(3, "Inside route3...\n"); if (!t_relay()){ sl_reply_error(); }; sl_send_reply("201", "Options message received, probably from Sipsak"); #forward(192.168.3.208, 5070); log(3, "End of route3...\n"); #t_release(); }

1 0

[OpenSER-Users] Exposing the NIC IP's in openser.cfg
by Robert Dyck 18 Dec '07

18 Dec '07

I have been using openser as an ALG for the purpose of NAT traversal. Unfortunately my public IP is dynamically assigned. Although openser is aware of the IP's available on the host, I have searched unsuccessfully the documentation for a way to expose this information to the configuration script. Have I missed something? I am using the following ugly work around. DHCP client writes to /var/openser/my-ip From the rtpproxy init script - OPTIONS="-l 192.168.1.1/`cat /var/openser/my_ip` -s udp:localhost:12221" from openser.cfg - route{ # get our public ip, this happens only once if !$var(ip_initialized) == "yes" { xlog("L_NOTICE", "****************************************************\n"); xlog("L_NOTICE", "*** Initializing the IP for masquerading SIP Contact\n"); exec_avp("cat /var/openser/my_ip", "$avp(s:pub_ip)"); pv_printf("$var(my_ip)", "$avp(s:pub_ip)"); xlog("L_NOTICE", "*** New public IP is <$var(my_ip)>\n"); $var(ip_initialized) = "yes"; }; mangle contacts

1 0

[OpenSER-Users] newbie help - handeling 302s and 404s
by Lazer Ramm 18 Dec '07

18 Dec '07

Hi, i need a simple config that achieves the following (w/ out a db) if a user is not registered then all calls should go to a default gw 192.168.10.1 the default gw will only respond w/ a 302 or a 404 if a 302 is received then openser should forward the call on to the new gw listed in the reply if a 404 is received the call should be forwarded to a different gw 172.16.20.1 if the send gw is done then the call should die. here is what i was thinking of but as a newbie i may be off my rocker i seem to get an error ERROR: t_check_status: cannot check status for a reply which has no T-state established but again my whole approach may be wrong. if (!lookup("location")) { rewritehostport ("192.168.10.1:5060"); if (t_check_status("(404)|(480)")) { log("404 or 480 negative reply\n"); rewritehostport ("172.16.20.1:5060"); } else{ t_on_failure("1"); t_relay(); } failure_route[1] { get_redirects("*"); t_relay(); } } thanx in advance

1 0

Re: [OpenSER-Users] Want to know about configuring openser as strict router
by Vikas CG. 18 Dec '07

18 Dec '07

Hi, Thanks for the information, Actually we were looking to some server which can acts as a strict router. Can u suggest regarding this? Thanks, Vikas C.G. -----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Tuesday, December 18, 2007 7:59 PM To: Vikas CG. Cc: users(a)openser.org Subject: Re: [OpenSER-Users] Want to know about configuring openser as strict router Hi! Openser is a loose-router. This means that the inserted Record-Route header do have the ;lr parameter. Thus, other SIP clients know that openser is a looserouter and weill send messages in loose-router syntax. On the other hand, openser checks if the next route header and/or the RURI contains the ;lr parameter to make conversion from/to strict-router syntax. Thus, depending on if the previous and next hops are strict or loose routers, openser will do the conversion (by using the loose_route() function). regards klaus Vikas CG. schrieb: > Hi all, > > > > We are using openser server for testing. Can we configure it as > strict router? > > I have tried making changes in configuration file by enabling Record > Route. > I want to know whether the openser will strictly acts as "Strict Router" > I.e. performing actions like modifying Request URI and last route header. > Can any body suggest me? > > > > Thanks in advance , > Vikas C.G. > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users

2 1

[OpenSER-Users] OpenSER: AVP script flag bugs in 1.3 and trunk
by Helmut Kuper 18 Dec '07

18 Dec '07

Hello, in openser 1.3 and current trunk the AVP script flags still not work as expected. So here again the fixes I did to solve that problems in 1.3 and trunk: ... Hi again, further tests with avp and script_flags raised new problems. When I write resp. set an AVP like "$avp(i1:10)=10; $avp(i2:10)=20;" and checking them with "xlog('L_INFO', 'avp(i1:10) avp(i1:20)\n');" it leads to "20 20" as output. In file pvar.c in function pv_get_avp_name() I had to replace *name_type = 0; with *name_type = ip->pvn.u.isname.type; Then that worked. - -.- Additionally I fixed the Alias-Duplicate Problem when you do something like avp_aliases("A=i1:10; B=i2:20"); In file usr_avp.c I had to change line 427 in function check_avp_galias() from type &= AVP_NAME_STR; to type &= (AVP_NAME_STR|AVP_SCRIPT_MASK); - -.- Then at last, if u want assign a value to an AVP-Alias which uses script flags replace in file usr_avp.c in function add_avp_galias() around line 482 the line ga->avp.type = type&AVP_NAME_STR; with ga->avp.type = type&(AVP_NAME_STR|AVP_SCRIPT_MASK); regards Helmut

4 6

[OpenSER-Users] Want to know about configuring openser as strict router
by Vikas CG. 18 Dec '07

18 Dec '07

Hi all, We are using openser server for testing. Can we configure it as strict router? I have tried making changes in configuration file by enabling Record Route. I want to know whether the openser will strictly acts as "Strict Router" I.e. performing actions like modifying Request URI and last route header. Can any body suggest me? Thanks in advance , Vikas C.G.

2 1

[OpenSER-Users] Question about feature requests
by Sergio Gutierrez 18 Dec '07

18 Dec '07

Hello everybody. I would like to know how is the right procedure to implement a new feature for OpenSER. For example, if I propose a new Feature, is it well to include the patch for the implementation, or I just propose it, and wait for the approval of one of the core developers? Best regards. Sergio Gutiérrez.

3 3

[OpenSER-Users] ERROR:core:io_watch_add: epoll_ctl failed: Invalid argument [22]
by Mihail Gluhowchenko 18 Dec '07

18 Dec '07

Truing to start openser-1.3.0. In log i`m saw: ERROR:core:io_watch_add: epoll_ctl failed: Invalid argument [22] Dec 18 12:37:17 devel s-eltex[27564]: CRITICAL:core:tcp_main_loop: failed to add process 5 (TCP main) unix socket to the fd list Dec 18 12:37:17 devel s-eltex[27564]: CRITICAL:core:tcp_main_loop: exiting... In config i`m set listen=udp:192.168.138.59:5060 Why openser truing to open tcp sockets? And another bug: If stop openser and then start. If dont switch off SIP clients server down with error.

2 2

[Serusers] ser multi-domain support SOLVED
by satish patel 18 Dec '07

18 Dec '07

Dear all I have solve my multidomain configuration with ser-0.9.6 and it is working fine for me and i am sending you my configuration for incomming users whos want do some stuff wid ser i have find many document on multi-support and i have consolidate all document and make my ser.cfg script or config cat /usr/local/etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=7 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.104.20 port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/call.so" #loadmodule "/usr/local/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 0) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("domain", "db_url", "mysql://root:mypasswd@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") modparam("usrloc|registrar|auth_db|avpops|group", "use_domain", 1) #modparam("usrloc", "use_domain", 1) #modparam("registrar", "use_domain", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) #-----------Multi-domain Logic work blow in stanza--------# if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); break; save("aliases"); break; }; #----Alias check--- # lookup("aliases"); # if (!uri==myself) { # route(1); # break; # }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #-----END---# Now to test configuration start ser #serctl start #serctl domain add abc.com #serctl add 222(a)abc.com tulip 222(a)abc.com #serctl add 333(a)abc.com tulip 333(a)abc.com this to user 222 and 333 for domain abc.com **Notes:- you should configure SRV recode on your DNS otherwise it will not work for you NOW configure your Xlite and try to call each other Then try to add new domain and do same thing which u have done before abc.com Thanks and Best of Luck $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- Share files, take polls, and discuss your passions - all under one roof. Click here.

1 0

[Serusers] call.so and vm module missing
by satish patel 18 Dec '07

18 Dec '07

Dear all I have compileing ser-0.9.6 and it is compiled successful but when i going to /usr/local/lib/ser/module directory there is no required module call.so and vm.so how to compile i have also try this one make modules=modules/call modules but there is no file found How to compile and get support of call.so module and vm.so module $ cat ~/satish/url.txt http://www.linuxbug.org _____________________________________________________________________________________________________ --------------------------------- Get the freedom to save as many mails as you wish. Click here to know how.

2 1

[Serusers] Ser sends messages not in that order in which it has received
by Alexandr Volkov 18 Dec '07

18 Dec '07

Hi, We have found one unpleasant situation with a Ser often shown at greater loadings. At greater loadings and at work of a Ser with number of child processes greater than one (Parameter 'children' in ser.cfg), Ser sends messages not in that order in which it has received. And as the result appears request pending errors. We simulated this situation continuously reinviting the remote UA. Usually the error is occured on the tenth-twentieth reinvite. In the attachment there are SIP logs reproducing this situation. Somebody can tell in occasion of this problem, or offer the decision? Or whether there is a version in which there is no this lack? Alexandr

1 0

[OpenSER-Users] OpenSER - unixODBC Module
by Martin.Gruber1＠infineon.com 18 Dec '07

18 Dec '07

Hi, Well I now know my problem why I cannot connect to my Oracle-Database. The Connectionport hast changed. My question is, how can I insert the Port-Number the the connectionstring in openser.cfg....... unixodbc://user:password@oracle.server.com:PortNr/ORA Does not work at all. Does anybody know, where I can add the Port Number in the Connectionstring? Kind regards, Martin

2 1

Re: [OpenSER-Users] OpenXcap exception: TypeError in twisted.web2.stream.IByteStream
by Antoine Fressancourt 18 Dec '07

18 Dec '07

Hello, I have the same error as Gregorio on my installation, I am running OpenSER 1.3 and my XCAP client is eyeBeam². Thanks in advance for your help, Antoine 2007/10/30, Gregorio <goyo.villalba(a)dialcom.com>: > > Hi all. > > > > I get an exception in openXcap when I send a GET to retrieve the resources > file. > > I explain the process I followed: > > > > ----->Send GET to openXcap. > > <----Receive 404, because there is not file. > > > > -----> Send PUT to openXcap. The body contains a resource-list.xmldocument 'with no data': > > Body; > > <?xml version='1.0' encoding='UTF-8'?> > > <resource-lists xmlns='urn:ietf:params:xml:ns:resource-lists' > xmlns:cp='urn:ietf:params:xml:ns:copycontrol'> > > <list></list> > > </resource-lists> > > > > <----Receive 200 OK. So openXcap likes my document. > > > > -----> Send GET to openXcap. > > <---- Receive 500 "An error occurred rendering the requested page. More > information is available in the server log". So the same document that was > accepted in the PUT throws an exception. > > > > The server log says: > > > > Oct 30 15:01:55 localhost openxcap[2791]: [-] Exception rendering: > > Oct 30 15:01:55 localhost openxcap[2791]: [-] Traceback (most recent call > last): > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/posixbase.py", line 228, > in mainLoop > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.runUntilCurrent > () > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/base.py", line 533, in > runUntilCurrent > > Oct 30 15:01:55 localhost openxcap[2791]: [-] f(*a, **kw) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 239, in > callback > > Oct 30 15:01:55 localhost openxcap[2791]: [-] > self._startRunCallbacks(result) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 304, in > _startRunCallbacks > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self._runCallbacks() > > Oct 30 15:01:55 localhost openxcap[2791]: [-] --- <exception caught > here> --- > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 317, in > _runCallbacks > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.result = > callback(self.result, *args, **kw) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/xcap/resource.py", line 51, in > sendResponse > > Oct 30 15:01:55 localhost openxcap[2791]: [-] response = > http.Response(response.code, stream=response.data) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/web2/http.py", line 109, in > __init__ > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.stream = > IByteStream(stream) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] exceptions.TypeError: > ('Could not adapt', array('c', "<?xml version='1.0' > encoding='UTF-8'?><resource-lists > xmlns='urn:ietf:params:xml:ns:resource-lists' > xmlns:cp='urn:ietf:params:xml:ns:copycontrol'><list></list></resource-lists>"), > <InterfaceClass twisted.web2.stream.IByteStream>) > > > > > > Anyone know what is wrong? > > Thanks and best regards. > > Gregorio > > > > > > > > > > > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

2 1

[OpenSER-Users] publish with empty body
by jh＠tutpro.com 18 Dec '07

18 Dec '07

while testing a new sip ua, i noticed that at some point it sent (don't ask me why because i don't know) a publish request without any body. it was not an initial publication, because it contained SIP-If-Match header with an etag. the publication was for even package presence. what openser presence server did was that it accepted the publish with 200 ok that contained a NEW etag value in its SIP-If-Match header. i have been trying to find out from rfcs where this kind of behavior would have been defined, but so far without success. rfc3903 says: 5. The ESC processes the published event state contained in the body of the PUBLISH request. If the content type of the request does not match the event package, or is not understood by the ESC, the ESC MUST reject the request with an appropriate response, such as 415 (Unsupported Media Type), and skip the remainder of the steps. in this publish content type didn't match the event package, because there was none. reading further i found this: * If the request has no message body and contained no entity-tag, the ESC SHOULD reject the request with an appropriate response, such as 400 (Invalid Request), and skip the remainder of the steps. Alternatively, in case either ESC local policy or the event package has defined semantics for an initial publication containing no message body, the ESC MAY accept it. but it does not apply, because the publication was not initial. so, have i found a bug or any other ideas? -- juha

2 2

Re: [Serusers] rewritehostport and RFC3261 compliant
by Klaus Darilion 18 Dec '07

18 Dec '07

Hi Adrien! I Cc this email also to the seruser mailing list as it might be interesting for others too. Adrien Lemoine schrieb: > Hi Klaus, > > I've some good news !!! (Sorry to take your time) > > I try the solution in the URL paste in the last mail, and it runs ! > > So I've something like this : > > if ( t_check_status("(1[0-7][0-9])|(180)") ) { > xlog("L_WARN","time=[%Tf] call id=[%ci] call seq=[%cs] contact > header=[%ct] from uri=[%fu] from tag=[%ft] request's method=[%rm] request's > uri=[%ru] to uri=[%tu] to tag=[%tt] sip message id=[%mi] process id=[%pp] ip > source=[%is] flags=[%mf], fix To-Tag failure [Thomson]\n"); > subst('/^(To:.*)\;tag=[^;[:cntrl:]]*/\1/i'); > } > break; > > The guy precise that 183 don't have to be included in this test, why ? Bogdan was afraid that this could break "early media", but I'm sure it is best to include 183 as well. Thus this regular expression should handle all provisional responses. t_check_status("(1[0-9][0-9])") > Is this could be okay for simplify the solution and don't take the risk to > break an other service by collateral effects ? You never know and it would be better to fix it in the SIP phone/gateway. But I think it is a acceptable workaround. > I think I beging to understand the problem : my Thomson product "remember" > of the first to-tag include in "180 ringing" and doesn't accept an other > to-tag for the same transaction. Isn't it ? Yes. Some theory: SIP has to match incoming requests and responses to existing dialog. This is done by comparing the 3-tuple call-id/from-tag/to-tag. Messages which are sent out of dialog do not have a to-tag (tag parameter in the To: header). The initial INVITE request is sent "out-of-dialog" (no to-tag). If a SIP client responses to the INVITE request it adds a to-tag to the response. Thus, if the INVITE is sent to multiple devices (e.g. parallel ringing on multiple SIP devices or call forwarding on timeout) the caller will receive multiple responses. As the to-tag is different for each called SIP device the caller can detect responses from different devices. (this is a feature of SIP). If the caller SIP client receives provisional responses (101-199) it will create an "early dialog". Once a final response is received the dialog will convert into "confirmed" state ( 200 OK) or the dialog will be terminated (3xx-6xx responses). Example: caller proxy phone1 phone2 *0 --INVITE----------> <-100 (no to tag)-- ----INVITE------> *1 <---100 trying--- <---180 ringing-- <---180 ringing----- *2 ----INVITE-----------------> <---100 trying-------------- <---180 ringing------------- <---180 ringing----- *3 <---200 ok----------------- <----200 ok --------- *4 ----CANCEL------> ........ An RFC compliant SIP client should handle the scenario following: *0: the caller sends the INVITE (out-of-dilaog). *1: The caller receives a 100 trying response. A "100 trying" does not have a to-tag and thus does not create dialogs. It will only stop retransmissions. *2: The caller receives a provisional response. It creates an "early-dialog" with the identifier call-id/fromtag/totag1. *3: The caller receives another provisional response. The response has a different to-tag. Thus the caller creates a second "early-dialog" with identifier call-id/fromtag/totag2. *4: The caller receives a final response. The 200 ok matches call-id/fromtag/totag2. Thus, the first early-dialog will be terminated and the second early-dialog will be transformed into "confirmed" state. Some non-complient clients handle it in other ways, e.g.: - Asterisk with "pedantic=no": Asterisk does not care about totags in provisional responses but only in the 200 ok. (works but insecure). - Asterisk with "pedantic=yes": Asterisk learns the totag from the first provisional response. All further responses with different totag are ignored. (breaks compatibility). I guess the Thomson device has the some bug as Asterisk in pedantic mode. > If it's that, I don't read something about this behaviour in the RFC to > argument my quick fix. Of course the workaround with "removing totags in provisional responses" breaks the RFC - but in the case with broken clients the RFC is already broken by the clients. > An other problem appears, you said that "try to remove the to-tag in the 180 > and 183 responses *to this client*". I would like too, but how can I match > UserAgent in Status, there's not. If the INVITE has a user agent header like "User-Agent: Thomsen abcd....." you activate the reply_route. E.g. ... if ((method == INVITE) && (search("User-Agent: Thomson")) { t_on_reply("1"); xlog("L_INFO","buggy Thomson, activate reply route to strip totag"); } ... onreply_route[1] { xlog("L_INFO","reply route: strip totag"); # put some more xlog here if wanted... if (t_check_status("(1[0-9][0-9])")) { subst('/^(To:.*)\;tag=[^;[:cntrl:]]*/\1/i'); } } regards Klaus

1 0

[OpenSER-Users] Using append_hf("Route: xx") and loose_route() not stripping pre-loaded routeset?
by Taisto Qvist 18 Dec '07

18 Dec '07

Hi Guys, I have been trying all day, to create "static routing" in my openser-proxy(1.3). My openser-script is based on the default, so what I am doing is just: ------------------------------------------- if ( loose_route() ) { // strip of preloaded route is NOT being done here?? route(); } if ( isToMe() ) { // Do local logic } else { // forward this via proxyX append_hf("Route: <sip:1.1.1.1:5060;lr>\r\n"); if (loose_route() ) { route(1); } else { // I always end up here...loose_route() always returns false... // because its looking at the first route, that should have been stripped off... } ----------------------------- I have added lots of traces to lookup.c, and according to those, it seems that the preloaded route is not stripped off properly? Once I get too the second "loose_route()", that function IS STILL looking at the first preloaded route, which should have been stripped in the first "if". I am getting the feeling that the "deletion/stripping" of the first, preloaded, Route, is not done directly, causing the second check, to find the first... My work-around is naturally to use setdsturi(), but I thought that loose_route() should be able to do all this for me...? Also, this used to work, in version 1.1, about year ago :-) Any toughts? Regards Taisto Qvist

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users