- sr-users - kamailio.org

[OpenSER-Users] Re: A problem with CDRTool
by Dan-Cristian Bogos 29 Jun '07

29 Jun '07

Hi Jacky, looks like your rating engine is not running. Did u install and start it? I am using debian packages for cdrtool and it is automatically installed. If u used same, all u must do is edit the /etc/defaults/cdrtool to enable both ratingengine as well as memcached and then start cdrtool with /etc/init.d/cdrtool start. Hope that helps. Cheers, DanB

1 0

[OpenSER-Users] accounting parallel invite
by yoshiki 29 Jun '07

29 Jun '07

hello ! I am weak in English. Please teach it about a accounting request-uri on parallel invite. UAC ----> OpenSER ----> UAS1 | ----> UAS2 1. UAC call to UAS. e.g. from: UAC(a)test.com -> to: UAS(a)test.com 2. avpop module in OpenSER search UAS. 3. hit UAS1 and UAS2. 4. I enumerate contact address that was found from a location table to request-URI. 5. OpenSER relay to UAS1 and UAS2. 6. UAS1 pick up call. 7. acc module account to database src_user UAC dst_user UAS1 But I want to account parallel number (UAS). How may you write in UAS to database ? -------------------------------------- Start Yahoo! Auction now! Check out the cool campaign http://pr.mail.yahoo.co.jp/auction/

2 1

[OpenSER-Users] Openser as reverse proxy
by hdpml 29 Jun '07

29 Jun '07

Dear Mailinglist, I am a rookie in SER and joined this mailinglist a few minutes ago. Hope you can help me with my question. I found ser at my search for a sip / rtp proxy. I want to install the following scenario: client -> Internet or WLAN -> SER proxy + rtpproxy(DMZ) -> Asterisk (Internal LAN) Is it possible with openser that the authentication is passed through to asterisk and openser accept the call if the user is valid? My idea is, not to have any userdata on the SER proxy. I just want that the proxy forwards the request to the asteriskserver and checks if the REGISTER is OK or not. If the user is invalid, the proxy should deny requests from this user to the asteriskserver. If this will be possible, is it possible to integrate encryption of RTP and SIP too? Like a http reverseproxy? Thank you very much. Dominic HDPnet GmbH Erwin-Rohde-Str. 18 69120 Heidelberg Geschaeftsfuehrer: Marc Hermann Registergericht: Mannheim HRB 337012 Sitz: Heidelberg Umsatzsteuer ID Nr.: DE 211 257 470 www.hdpnet.de Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

2 1

[OpenSER-Users] The Via Header of CANCEL Message
by fancy 29 Jun '07

29 Jun '07

According to RFC 3665 section 3.8 and RFC 3261 section 9, there is only one via header in CANCEL message (message F11, F13 at page 72 of RFC 3665). But when I ran the similar scenario(through one proxy), I got two via header in CANCEL message such as following: CANCEL sip:UA12@node11.under.test.com;transport=udp SIP/2.0 Record-Route: <sip:192.0.50.50;lr=on;ftag=11380> Via: SIP/2.0/UDP ss.under.test.com;branch=z9hG4bKd068.25909417.0 Via: SIP/2.0/UDP node.under.test.com:5060;received=192.0.10.10;branch=z9hG4bKPUA4295483 Max-Forwards: 69 From: UA11 <sip:UA11@under.test.com>;tag=11380 To: <sip:UA12@under.test.com> Call-ID: 11380(a)tom.example.com CSeq: 4 CANCEL Content-Length: 0 P-hint: usrloc applied How can I remove the 2nd via header? Thank you Best Regards, Fangyu Ling

2 1

Re: [OpenSER-Users] Openser 1.2.1 with FreeRADIUS 1.1.6 with MySQL 5.0.41
by Neeraj Gupta 29 Jun '07

29 Jun '07

1 0

[OpenSER-Users] A problem with CDRTool
by Lee Jacky 29 Jun '07

29 Jun '07

Hi,all. I have met a problem with CDRTool. I am using openser1.1+CDRTool5.1.4. When I open CDRTool's web page,and click the Rating link,then I get lots of records, but the following warning is also showed: Warning: fsockopen() [function.fsockopen]: unable to connect to IP-Address:9024 in /usr/local/apache/htdocs/CDRTool/rating_lib.phtml on line 2492 | Cannot connect to rating engine IP-Address:9024 Had anyone met this before? Any tips will be appreciated. ___________________________________________________________ Mp3疯狂搜-新歌热歌高速下 http://music.yahoo.com.cn/?source=mail_mailbox_footer

1 0

Re: [Serusers] How SER communicate to other SIP server
by roayu 29 Jun '07

29 Jun '07

Hi, Olaf! I'll have a look and try on it. Thanks. Best regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Thursday, June 28, 2007 5:34 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > Hi, Olaf! > > Ok, but which section that I need to concentrate on the most? I've search > through the whole documentation and I can't find the configuration/setting > on the ser.cfg file. Really appreciate on your help... Look at the "Hello World ser.cfg" <http://siprouter.onsip.org/doc/gettingstarted/ch06.html>. For unknown SIP domains, route[1] does the DNS-based forwarding mentioned before. You should give it a try and see how it works. HTH, Olaf

1 0

Re: [Serusers] add prefix to source
by Szasz Szabolcs 28 Jun '07

28 Jun '07

Hi! I know the prefix() and the strip() functions, but how can I change the from_uri (caller)? Thanks for the help. > > ----- Original Message ----- > From: "SIP" <sip(a)arcdiv.com> > To: "Szasz Szabolcs" <sszasz(a)digicomm.ro> > Sent: Monday, June 25, 2007 12:34 AM > Subject: Re: [Serusers] add prefix to source > > >> Use the prefix() function. >> >> i.e. to add the prefix 555 onto the beginning of a URI, >> >> prefix("555"); >> >> N. >> >> >> Szasz Szabolcs wrote: >>> Hi all >>> I need to add a prefix to the source uri/number. >>> How ca I do this? Can you help me guys? >>> Thanks a lot >>> Szasz Szabolcs >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Serusers mailing list >>> Serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> -- >> This message was scanned for spam and viruses by BitDefender. >> For more information please visit http://linux.bitdefender.com/ >> >> > -- This message was scanned for spam and viruses by BitDefender. For more information please visit http://linux.bitdefender.com/

4 6

[Serusers] Error 483 response to ACK and BYE
by SIP 28 Jun '07

28 Jun '07

In response to a BYE and an ACK from some (not all) servers that send to our proxy, our server's spitting back a 483 'Too many hops' reply. It doesn't happen with all peers, and it certainly doesn't happen locally... but it does happen with some, and I'm not entirely sure as to why. The 483 block at the beginning is normal: if (msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; Exchange looks like this: U 198.65.166.131:5060 -> 63.64.65.66:5060 BYE sip:1101XXXXXXX@63.64.65.66:5060 SIP/2.0. Record-Route: <sip:198.65.166.131;ftag=gpp0q468oh;lr>. Via: SIP/2.0/UDP 198.65.166.131;branch=z9hG4bK9b05.b75fbe14.0. Via: SIP/2.0/UDP 192.168.1.51:2054;received=63.XX.XX.XX;branch=z9hG4bK-wdtud2nffq88;rport=2054. Route: <sip:63.64.65.66;ftag=gpp0q468oh;lr=on>. From: "User One" <sip:1747XXXXXXX@their.proxy.server:5060>;tag=gpp0q468oh. To: <sip:1101XXXXXXX@their.proxy.server;user=phone>;tag=as7fbbcb66. Call-ID: 3c267038e7ef-586eg1emcfsi@snom190. CSeq: 2 BYE. Max-Forwards: 16. Contact: <sip:1747XXXXXXX@192.168.1.51:2054;line=oxd9zlst;nat=yes>. User-Agent: snom190/3.60x. Content-Length: 0. RemoteIP: 63.XX.XX.XX. P-hint: rr-enforced. P-NATed-URI: YES (1). P-RTP-Proxy: YES (1). U 63.64.65.66:5060 -> 198.65.166.131:5060 SIP/2.0 483 Too Many Hops. Via: SIP/2.0/UDP 198.65.166.131;branch=z9hG4bK9b05.b75fbe14.0. Via: SIP/2.0/UDP 192.168.1.51:2054;received=63.XX.XX.XX;branch=z9hG4bK-wdtud2nffq88;rport=2054. From: "User One" <sip:1747XXXXXXX@their.proxy.server:5060>;tag=gpp0q468oh. To: <sip:1101XXXXXXX@their.proxy.server;user=phone>;tag=as7fbbcb66. Call-ID: 3c267038e7ef-586eg1emcfsi@snom190. CSeq: 2 BYE. Server: Sip EXpress router (0.9.6 (i386/linux)). Content-Length: 0. Warning: 392 63.64.65.66:5060 "Noisy feedback tells: pid=3488 req_src_ip=63.64.65.66 req_src_port=5060 in_uri=sip:1101XXXXXXX@63.64.65.66:5060 out_uri=sip:1101XXXXXXX@63.64.65.66:5060 via_cnt==18". What would be causing this? Is it because the IP address is being used in the URI to us as opposed to the domain (I tried adding the IP to the domain table and to an alias line alternately, but it didn't fix things) ? It's irksome in that it only happens with certain peers and not others, so there's something in the way we're handling messages from them that's not right or different, but since we handle all incoming the same way, I'm at a loss as to why it works with some but not with others. N.

4 9

[OpenSER-Users] Any demo for stateful proxy setting with 301/302 forwarded?
by Lucian Romi 28 Jun '07

28 Jun '07

Hi, I'm using openser basic config now. And I'm totally a freebie here. I want to set up a system with handle 301/302 forward for INVITE sending from openser, so it must be a stateful proxy and seems like there must be something in ser.cfg to support this. If don't, then openser will forward 301 and 302 all the way back, that's not I want. I'm really appreciate any help. Thanks!!!!

2 2

[OpenSER-Users] Openser 1.2.1 with FreeRADIUS 1.1.6
by Neeraj Gupta 28 Jun '07

28 Jun '07

2 4

[OpenSER-Users] NEW MODULE: Datagram implementation for MI
by Bogdan-Andrei Iancu 28 Jun '07

28 Jun '07

Hi, thanks to Ancuta Onofrei, we added today a new transport implementation for the Management Interface (MI). This is Datagram (via unix and network sockets) and it completes the migration to MI (after fifo), but not the last from the transport implementations :). It is in alpha stage, so more testing is needed. NOTE that all MI commands are available via datagram interface; also the syntax of the commands and replies is exactly as for FIFO. For more info, please see the online documentation: http://www.openser.org/docs/modules/1.2.x/mi_datagram.html or ask on the mailing list. Any feedback - bugs or improvements - are welcomed. Also I want to bring in discussion a related subject - dropping the old unix sockets implementation from the core. Before doing it I would like to know who is still using it and if there are any issues with migrating to the new implementation. Regards, Bogdan

4 9

[OpenSER-Users] openser.cfg debug howto
by Rizwan Hisham 28 Jun '07

28 Jun '07

Hi all, I am a new user of openser.i just installed and configured it to send and recieve calls. im having some problems with scripting. Whenever there is a problem in openser.cfg, it just displays the number of errors. is there anyway to know at what line the error is and also what kind of error. As im a new user and so i dont know the syntax and symantics of the scripting very well, im not very good at finding the error by looking at the file. Hopefully this is possible -- Best Regards Rizwan Hisham Software Engineer AXVOICE Inc. www.axvoice.com

1 0

[OpenSER-Users] Passing information/Headers
by Kelvin Williams 28 Jun '07

28 Jun '07

I need to pass information between OpenSER and Asterisk for a couple applications I have created. I figured the best way to do this would be to append a header field and have either OpenSER or Asterisk peel it off and take a look at what it says. However, I've found that Asterisk some times gets perturbed by the additional header field. Is it possible/wise to create your own headers? What other way could I pass information (used for scripts in Asterisk/OpenSER) between the two servers? Thanks, kw

2 1

Re: [Serusers] How SER communicate to other SIP server
by roayu 28 Jun '07

28 Jun '07

Hi, Olaf! Ok, but which section that I need to concentrate on the most? I've search through the whole documentation and I can't find the configuration/setting on the ser.cfg file. Really appreciate on your help... Thanks. Best regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Thursday, June 28, 2007 4:20 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > Hi, Olaf! > > Is there any settings that I need to do on SER or ser.cfg? Sure. At this point, you really should read <http://www.iptel.org/ser/doc/gettingstarted> before proceeding. Best regards, Olaf

2 1

[OpenSER-Users] wengophone and openser
by Radu Spineanu 28 Jun '07

28 Jun '07

Hi, I have a working basic openser + asterisk setup. Twinkle works OK and wengophone doesn't. It tries to connect and then after a while times out. While debugging I noticed a lot of OPTIONS ping requests are going unanswered by openser because it contains an user in the uri. Registration seems to be working OK. I've attached the ngrep output that shows this. Has anyone got wengophone to work with openser? -- Radu Spineanu interface: eth0 (217.73.174.0/255.255.255.224) filter: (ip or ip6) and ( port 5060 ) # U 82.79.243.82:5060 -> 217.73.174.13:5060 REGISTER sip:217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=123456789..Route: <sip:217.73.174.13;lr>..From: nobo dy <sip:nobody@217.73.174.13>;tag=123456789..To: <sip:nobody@217.73.174.13>..Call-ID: 000001@ping..Contact: <sip:nobody@82.79.243.82>..C Seq: 2 REGISTER..Content-Length: 0.... # U 217.73.174.13:5060 -> 82.79.243.82:5060 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 82.79.243.82:5060;rport=5060;branch=123456789..From: nobody <sip:nobody@217.73.174.13>;tag=12 3456789..To: <sip:nobody@217.73.174.13>;tag=5e02e7658def22f683939a852e493344.3f4e..Call-ID: 000001@ping..CSeq: 2 REGISTER..WWW-Authentic ate: Digest realm="217.73.174.13", nonce="46823bd8e5f68588801e0655bbc907e2425ee03f"..Server: OpenSER (1.2.1-notls (x86_64/linux))..Conte nt-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 REGISTER sip:217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1094221745..Route: <sip:217.73.174.13:5060;lr >..From: <sip:1001@217.73.174.13>;tag=1065314925..To: <sip:1001@217.73.174.13>..Call-ID: 807187534@82.79.243.82..CSeq: 1 REGISTER..Conta ct: <sip:1001@82.79.243.82:5060>..Max-Forwards: 70..User-Agent: wengo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 2940..Content-Length: 0.... # U 217.73.174.13:5060 -> 82.79.243.82:5060 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 82.79.243.82:5060;rport=5060;branch=z9hG4bK1094221745..From: <sip:1001@217.73.174.13>;tag=106 5314925..To: <sip:1001@217.73.174.13>;tag=5e02e7658def22f683939a852e493344.4bcc..Call-ID: 807187534@82.79.243.82..CSeq: 1 REGISTER..WWW- Authenticate: Digest realm="217.73.174.13", nonce="46823bd9c467d1377ec65d343c7dfc7bd40513c3"..Server: OpenSER (1.2.1-notls (x86_64/linux ))..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 REGISTER sip:217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK2031845783;xxx-nat-type=sym..Route: <sip:217. 73.174.13:5060;lr>..From: <sip:1001@217.73.174.13>;tag=1065314925..To: <sip:1001@217.73.174.13>..Call-ID: 807187534@82.79.243.82..CSeq: 2 REGISTER..Contact: <sip:1001@82.79.243.82:5060>..Authorization: Digest username="1001", realm="217.73.174.13", nonce="46823bd9c467d137 7ec65d343c7dfc7bd40513c3", uri="sip:217.73.174.13", response="2e3d2c8bb188495863d4306f5cd5ba5c", algorithm=MD5..Max-Forwards: 70..User-A gent: wengo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 2940..Content-Length: 0.... # U 217.73.174.13:5060 -> 82.79.243.82:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 82.79.243.82:5060;rport=5060;branch=z9hG4bK2031845783;xxx-nat-type=sym..From: <sip:1001@217.73.174.13>; tag=1065314925..To: <sip:1001@217.73.174.13>;tag=5e02e7658def22f683939a852e493344.142c..Call-ID: 807187534@82.79.243.82..CSeq: 2 REGISTE R..Contact: <sip:1001@82.79.243.82:5060>;expires=2940..Server: OpenSER (1.2.1-notls (x86_64/linux))..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... # U 82.79.243.82:5060 -> 217.73.174.13:5060 OPTIONS sip:ping@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5060;rport;branch=z9hG4bK1028071012..From: Radu <sip:1001@217.73.1 74.13>;tag=675779892..To: <sip:ping@217.73.174.13>..Call-ID: 1333741103@82.79.243.82..CSeq: 20 OPTIONS..Max-Forwards: 70..User-Agent: we ngo/v1/wengophoneng/wengo/rev0/trunk/..Expires: 120..Accept: application/sdp..Content-Length: 0.... exit 14 received, 0 dropped

3 2

Re: [Serusers] How SER communicate to other SIP server
by roayu 28 Jun '07

28 Jun '07

Hi, Olaf! Is there any settings that I need to do on SER or ser.cfg? Thanks. Best Regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Thursday, June 28, 2007 3:04 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > Hi, Olaf! > > Thanks for your reply. Could you please further explain on the connectivity > between those to DIFFERENT sip servers? If I wanna call using a softphone to > call from SER to SIPserver B, how should I make the call? In a typical scenario, you configure your softphone to use SER as outbound proxy (registrar, etc.) and let it route outgoing SIP requests according to its configuration. When calling foreign domains (i.e., the callee has a domain that is different from your softphone's), a simple t_relay would do. More elaborate routing policies could be based on numeric "dial plans" etc. to forward SIP requests according to your needs. Best regards, Olaf

2 1

[OpenSER-Users] Does SER/OpenSER has the ability to continue searching for other routes despite 4xx/5xx/6xx responses?
by Jason Ma 28 Jun '07

28 Jun '07

Hi all, Does SER/OpenSER has the ability to continue searching for other routes despite 4xx/5xx/6xx responses?

2 1

Re: [Serusers] How SER communicate to other SIP server
by roayu 28 Jun '07

28 Jun '07

Hi, Olaf! Thanks for your reply. Could you please further explain on the connectivity between those to DIFFERENT sip servers? If I wanna call using a softphone to call from SER to SIPserver B, how should I make the call? Thanks. Best Regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Wednesday, June 27, 2007 3:10 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > I would like to find out is there anyway that the SER server can > communicate to other SIP servers? You could use SIP for this purpose. It has turned out to work pretty well since all SIP servers implement it by design ;-) > For instance, I have an account at SER > and another account at SIPserver B. I would like to call from SER to > SIPserver B, and vice versa. Is it workable? Or any additional devices > needed in between these 2 SIP servers? If yes, could anyone give me some > clues or guide to do so. You might want to have a look at the documents section at <http://iptel.org> , especially <http://www.iptel.org/ser/doc/gettingstarted>. HTH, Olaf

2 1

[Serusers] Floating point exception
by bozhang＠nec-labs.com 28 Jun '07

28 Jun '07

Hi, I download the ser software and I can compile it successfully on my machine with Fedora core 4. But when I tried to run it with the 'hello world ser.cfg' configuration file, it reports "Floating point exception" error message. Any body had similar error before? or any idea what is happening? I tried to copy the compiled binary to other machines with FC4 , all gave me the "Floating point exception" error. any input will be appreacited! -Bo

2 1

Re: [OpenSER-Users] About the opensip server.
by Henning Westerholt 28 Jun '07

28 Jun '07

On Mittwoch, 27. Juni 2007, gaoqiang.qian(a)nokia.com wrote: > Yes, I have the database in the msyql server by the openser_mysql.sh > create command, I can see it. > But I am not sure with the openser_mysql.sh create, is it enough for > adding those two users openserro and openserrw in the database? Normally this should be sufficient. But better check to be safe. Please reply also to the mailing list, that others can see your questions and the answers too. Henning

2 1

[OpenSER-Users] totally new
by Andres Paglayan 27 Jun '07

27 Jun '07

Hi, I did a little reading through the documentation at openser.org looking for something like a "tutorial" and couldn't find one, is there any kind of tutorial like resource available? Thanks, Andres Paglayan --"Harmony is more important than being right" Bapak

2 1

[OpenSER-Users] multiple NAPTR records in ENUM module
by Jonathan Creasy 27 Jun '07

27 Jun '07

Is there a way to have OpenSER try each NAPTR record when multiple are returned? 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 15 "u" "E2U+sip" "!^.*$!sip:+15555551234@server2" . 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 10 "u" "E2U+sip" "!^.*$!sip:+15555551234@server1" . 4.3.2.1.5.5.5.5.5.5.1.mysite.enum. 0 IN NAPTR 100 25 "u" "E2U+sip" "!^.*$!sip:+15555551234@server3" . That would route the calls to server1 (order 100, preference 10) but if server1 is not responding I would like it to move on and try server2. -Jonathan

2 7

[Users] Malformed CANCEL request from Asterisk possibly impacting OpenSER?
by David Coulthart 27 Jun '07

27 Jun '07

We are currently experiencing problems with our production OpenSER (1.1.0) environment where the load on the server is steadily increasing and the OpenSER response time increases drastically (e.g., 30+ seconds for an internal call to ring). Capturing the network traffic when this happens we have noticed that our Asterisk (1.2.10) voicemail server is sending malformed CANCEL requests to our OpenSER proxy. We are not certain whether this is a cause or an effect of the load problems on the OpenSER server. Here is the SIP data from the bad CANCEL request: Session Initiation Protocol Request-Line: CANCEL :u43974@128.59.59.215:5069 SIP/2.0 Method: CANCEL [Resent Packet: False] Message Header Via: SIP/2.0/UDP 128.59.59.215:5069;branch=z9hG4bK6734835b;rport Transport: UDP Sent-by Address: 128.59.59.215 Sent-by port: 5069 Branch: z9hG4bK6734835b RPort: rport Route: <sip:128.59.59.199;lr=on;ftag=4FC702F4-7F812557> From: <sip:43974@sip.columbia.edu;user=phone> SIP from address: sip:43974@sip.columbia.edu To: "Jim Rios" <sip:47891@sip.columbia.edu>;tag=4FC702F4-7F812557 SIP Display info: "Jim Rios" SIP to address: sip:47891@sip.columbia.edu SIP tag: 4FC702F4-7F812557 Contact: <sip:u43974@128.59.59.215:5069> Contact Binding: <sip:u43974@128.59.59.215:5069> URI: <sip:u43974@128.59.59.215:5069> SIP contact address: sip:u43974@128.59.59.215:5069 Call-ID: c9a0135b-41273fb6-f7b6cea9(a)160.39.14.100 CSeq: 101 CANCEL Sequence Number: 101 Method: CANCEL User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 Accompanying this bad CANCEL request are the following error messages recorded by OpenSER to syslog when it attempts to process it: May 29 15:34:07 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:07 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:07 cocoa openser[892]: xl_get_ruri: ERROR while parsing the R-URI May 29 15:34:08 cocoa openser[892]: c9a0135b-41273fb6-f7b6cea9(a)160.39.14.100: route[0] CANCEL r-uri <<null>> from <sip:43974@sip.columbia.edu;user=phone> to <sip:47891@sip.columbia.edu> May 29 15:34:08 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:08 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:08 cocoa openser[892]: loose_route: Error while parsing Request URI May 29 15:34:08 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:09 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:09 cocoa openser[892]: WARNING: do_action:error in expression May 29 15:34:09 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:09 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:09 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:10 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:10 cocoa openser[892]: ERROR: parse_uri: bad uri, state 0 parsed: <:u43> (4) / <:u43974@128.59.59.215:5069> (26) May 29 15:34:10 cocoa openser[892]: ERROR: parse_sip_msg_uri: bad uri <:u43974@128.59.59.215:5069> May 29 15:34:10 cocoa openser[892]: alias_db_lookup: Error while parsing Request-URI While the malformed packet is likely the fault of the Asterisk server (we see no packets from OpenSER to Asterisk with the sip protocol missing from the URI), we are wondering if OpenSER errors out in a bad way when it tries to process this packet, possibly entering into some sort of loop that is causing the load to go through the roof. It is also unclear to us why the Asterisk voicemail server would be responding with a cancel. In our packet capture we see no record of a request initiated by the Asterisk server that it would be sending a CANCEL for. Any insight that could be offered into this problem would be greatly appreciated. Thx, David Coulthart

3 5

Re: [OpenSER-Users] About the opensip server.
by Henning Westerholt 27 Jun '07

27 Jun '07

On Mittwoch, 27. Juni 2007, gaoqiang.qian(a)nokia.com wrote: > When I start the debug model, I have got some error of connecting mysql > database, it said something like > "mysql:openserro.openserro@localhost/openser" not found in the pool. > Could you tell me what could be the reason? > I can not find the achieves about this issues in the mail achieves. > Could you point out me some links? Hello Qiang, have you setup a mysql database and create the right tables with the database setup script? You find more informations about openser in the openser wiki on www.openser.org. If you want to use openser in a production environment, you should install a recent version, e.g. the latest stable release 1.2.1. Cheers, Henning

1 0

[OpenSER-Users] About the opensip server.
by gaoqiang.qian＠nokia.com 27 Jun '07

27 Jun '07

> Hi, > I am working in Nokia and now response for setup a openser sip server > providing sip proxy and registrar for one of our project. After I have > install the openser Sip server by following all the steps from CVS > installation guide. When I start the sip server with openser start > command, I always got: > 'openser' start: /etc/init.d/openser > Openser failed to start > Strating open sip router: > Listen on > Udp: > ... > Aliases: > Tcp: > ... > It seems the starting is failed. So could you tell me what could be > the reason? Or could you please tell me is there someway I can test if > my openser is running now? > Thanks. >

3 3

[Serusers] How SER communicate to other SIP server
by roayu 27 Jun '07

27 Jun '07

Hi, there! I would like to find out is there anyway that the SER server can communicate to other SIP servers? For instance, I have an account at SER and another account at SIPserver B. I would like to call from SER to SIPserver B, and vice versa. Is it workable? Or any additional devices needed in between these 2 SIP servers? If yes, could anyone give me some clues or guide to do so. Thank you. Best Regards, Roa yu

2 1

[OpenSER-Users] XCAP lite: http proxy setting
by vinayakumar.bendi＠wipro.com 27 Jun '07

27 Jun '07

Hi, Am trying to check 'XCAP server simulator for OpenSER presence agent' using an XCAP (client) test-tool from seagull. When I send an XCAP PUT request to XCAP server the request fails during schema validation. Have enabled libxml traces in xcap-lib.php and found the following error .. Jun 26 18:18:26 presence XCAP[26336]: <pre> Jun 26 18:18:26 presence XCAP[26336]: DOMDocument::schemaValidate() Generated Errors! Jun 26 18:18:26 presence XCAP[26336]: Warning 1549: failed to load external entity "http://www.w3.org/2001/xml.xsd" on line 0 Jun 26 18:18:26 presence XCAP[26336]: Warning 3084: Element '{http://www.w3.org/2001/XMLSchema}import': Failed to locate a schema at location 'http://www.w3.org/2001/xml.xsd'. Skipping the import. in file /var/www/xcap-root/schemas/resource-lists.xsd on line 7 Jun 26 18:18:26 presence XCAP[26336]: Error 3004: attribute use (unknown), attribute 'ref': The QName value '{http://www.w3.org/XML/1998/namespace}lang' does not resolve to a(n) attribute declaration. in file /var/www/xcap-root/schemas/resource-lists.xsd on line 73 Jun 26 18:18:26 presence XCAP[26336]: Error: failed to validate resource-lists against resource-lists.xsd It appears that the validation fails when trying to load an HTTP URL (for xml.xsd). I am running this in a network which has a gateway to internet via a proxy. Any clues to get around this problem will be appreciated? I have tried downloading xml.xsd locally and updating references in resource-lists.xsd but haven't had enough luck in getting it work either :-( Jun 26 18:16:53 presence XCAP[26321]: <pre> Jun 26 18:16:53 presence XCAP[26321]: DOMDocument::schemaValidate() Generated Errors! Jun 26 18:16:53 presence XCAP[26321]: Error 201: Namespace prefix xs on schema is not defined in file file:///var/www/xcap-root/schemas/xmlschema/xml.xsd on line 1 Jun 26 18:16:53 presence XCAP[26321]: Error 201: Namespace prefix xs on annotation is not defined in file file:///var/www/xcap-root/schemas/xmlschema/xml.xsd on line 2 ... Kind regards, Vinaya The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

1 0

[Users] Setting the media IP:port without Nathelper
by Bruno Machado 27 Jun '07

27 Jun '07

Hi all. There is a way to change the media IP and port without the module Nathelper? I don't want to use RTPProxy or Media Proxy. Let's suppose that the received INVITE has the headers: c=IN IP4 192.168.0.56 t=0 0 m=audio 20900 I want to set up the 'c' header to, for example, 192.168.0.100 and port 40000. Is it possible? Thanks. Bruno ____________________________________________________________________________________ Novo Yahoo! Cadê? - Experimente uma nova busca. http://yahoo.com.br/oqueeuganhocomisso

4 4

[Serusers] How SER communicate to other SIP server
by roayu 27 Jun '07

27 Jun '07

Hi, there! I would like to find out is there anyway that the SER server can communicate to other SIP servers? For instance, I have an account at SER and another account at SIPserver B. I would like to call from SER to SIPserver B, and vice versa. Is it workable? Or any additional devices needed in between these 2 SIP servers? If yes, could anyone give me some clues or guide to do so. Thank you. Best Regards, Roa yu

1 0

[Serusers] SER Accounting.
by Robert Zorop 26 Jun '07

26 Jun '07

Hi, all. I know this is a little bit out off Topic. I'm trying to install CDRTool for CDR normalization and billing with SER. I get the things allmost working (freeradius + MySQL + SER) But i can't get the CDRs normalized with price. Can anybody please help me or post a CDRTool global.inc working file? . Thanks a lot in advance any help will be highly apreciated!

2 1

[Serusers] Ser and asterisk as voicemail
by Riccardo Cupardo 26 Jun '07

26 Jun '07

2 1

[OpenSER-Users] SIP softphones which support TLS
by Vikas CG. 26 Jun '07

26 Jun '07

Hi all, Can any one please suggest some free SIP softphones which support TLS connection. Thanks, Vikas C.G. +91-9844502090 Span Infotech (I) Pvt.Ltd, Bangalore-40. SEI CMM - Level 4 & Certified ISO 9001:2000 www.spansystems.com <http://www.spansystems.com>

2 1

[OpenSER-Users] totag in 200 cancelling reply
by Alex Hermann 26 Jun '07

26 Jun '07

Hello, Situation is : UAC -> Asterisk1 -> OpenSER -> Asterisk2 OpenSER is using tm module (t_relay and friends). When the UAC cancels an INVITE, the CANCEL is propagated to Asterisk2 which replies to the INVITE with a 487 and to the CANCEL with 200 OK. Both replies have the same ToTag, as rfc3261 9.2 suggests (SHOULD). The 487 reply is forwarded to Asterisk1 by OpenSER with the ToTag unaltered, but the 200 OK is forwarded as "200 cancelling" with a different ToTag (created by OpenSER). This messes up the transaction matching on Asterisk1 (which uses pedantic=yes in the sip.conf and has to stay that way) Is there a way to force OpenSER to use the ToTag of the incoming reply (the winning branch?) instead of it creating a new one? -- Greetings, Alex Hermann

2 1

[Serusers] Routes to SIP broker
by Andrey Kuprianov 26 Jun '07

26 Jun '07

Hi, Are you guys planning on creating an outgoing route through sipbroker.com? Andrey.

2 3

[Serusers] Rfc 3327 path
by Stefan Ljung (TN/EAB) 26 Jun '07

26 Jun '07

Hi As I understand it rfc3327 is not supported in SER 0.9.6 . When I read the documentation for SER 2.0 I could not find anything written on the rfc3327 subject. But for SER 1.1.X the support for rfc3327 seem to be implemented. But SER 1.1.X has no stable release, right? Am I right ? Please advice as to which version of SER I should turn to have this service in my SIP domain.

2 1

[OpenSER-Users] CDRTOOLS+RADIUS+OPENSER
by ram 26 Jun '07

26 Jun '07

Hi can some have comment success rate of above combination deployement, stability and other issues, planning to deploy in live environment ram

1 0

[OpenSER-Users] Radius auth change attribute
by Richard Timsit 26 Jun '07

26 Jun '07

Hi, this was already asked in this mailinglist in Dec 2006, is a way to rewrite radius auth request packet before sending to radius ? I need to change User-Name attribute of the authentication request. Something new on this ? Thank you. -- Richard Timsit <Richard.Timsit(a)epfl.ch> EPFL

1 0

[OpenSER-Users] openser 1.2.1 core dumps on 302 redirect
by Brandon Price 26 Jun '07

26 Jun '07

With debug=99 I get ... 0(31783) DEBUG:t_check_status: checked status is <302> 0(31783) +15183024234 has a forward 0(31783) DEBUG:uac_redirect:get_redirect: resume branch=0 0(31783) DEBUG:uac_redirect:get_redirect: checking branch=0 (added=0) 0(31783) DEBUG:uac_redirect:get_redirect: branch=0 is a redirect (added=0) 0(31783) parse_headers: flags=7 0(31783) Found param type 232, <branch> = <z9hG4bK68c33491>; state=16 0(31783) end of header reached, state=5 0(31783) parse_headers: Via found, flags=7 0(31783) parse_headers: this is the second via 0(31783) DEBUG: get_hdr_body : content_length=0 0(31783) found end of header 0(31783) DEBUG:uac_redirect:sort_contacts: <sip: 13143212222(a)eastern.testdomain.net> q=10 0(31783) DEBUG:uac_redirect:shmcontact2dset: adding contact <sip: 13143212222(a)eastern.testdomain.net> 0(31783) ******* setting for branch 0 flags 0 0(31783) parse_headers: flags=78 Segmentation fault (core dumped) // Where is this core dump being written? related openser.cfg snippet: if(t_check_status("302")){ xlog("$tU has a forward"); get_redirects("*", "redirected"); xlog("forwarding to $tU"); t_relay("5.6.7.8"); exit; }; Any help is as always, greatly appreciated.

2 1

[OpenSER-Users] Debian Etch with MySQL module
by Gerardo Gonzalez 26 Jun '07

26 Jun '07

Regards, I am running Debian Etch and added the repository for OpenSER to the sources.list file. I installed OpenSER but when I try to install openser-mysql-module, I get the following error: The following packages have unmet dependencies. openser-mysql-module: Depends: libmysqlclient14 but it is not installable. First, I added the following repository: deb http://www.openser.org/debian etch main There's no repository etch. I was looking into http://www.openser.org/debian/dist and I saw the following directories: /sarge /stable I got the next error: Err http://www.openser.org etch/main Packages 404 Not Found Can anybody help me? Thanks -- GJGM

2 1

[OpenSER-Users] Permissions Module
by Kelvin Williams 26 Jun '07

26 Jun '07

Does anyone have Openser 1.2, with PostgreSQL 8.2.4 and the Permissions module working with at least one entry in the address table? If anyone has Openser 1.2 and PostgreSQL 8.2.4 running in combination, could you see if you can duplicate this problem? Any time any entry is in the address table, OpenSER will not start, reporting this error: openser=# select * from address; id | grp | ip_addr | mask | port ----+-----+---------+------+------ (0 rows) Starts fine! openser=# insert into address (grp, ip_addr, mask, port) values (0, '192.168.1.100',32, 5060); INSERT 0 1 openser=# select * from address; id | grp | ip_addr | mask | port ----+-----+---------------+------+------ 5 | 0 | 192.168.1.100 | 32 | 5060 (1 row) openser=# Jun 23 16:55:47 gaia /usr/local/sbin/openser[24163]: ERROR: permissions: address_reload(): Database problem Jun 23 16:55:47 gaia /usr/local/sbin/openser[24163]: permissions:init_addresses(): Reload of address table failed Jun 23 16:55:47 gaia /usr/local/sbin/openser[24163]: Error while initializing allow_address function Jun 23 16:55:47 gaia /usr/local/sbin/openser[24163]: init_mod(): Error while initializing module permissions Thanks in advance, kw

3 3

Re: [Serusers] Please help its urgent
by Jiri Kuthan 26 Jun '07

26 Jun '07

This indeed looks very much like a memory leek. Report it please with information as described in the memory leak section of http://www.iptel.org/ser/problem_reporting Anyhow -- upgrading to the latest version would be probably the safest thing to move ahead, I think that for many including yourself use of historical version is suboptimal use of time. -jiri At 10:43 21/06/2007, Arun Kumar wrote: >error: >-------- > sip ser[17671]: ERROR: sip_msg_cloner: cannot allocate memory > sip ser[17671]: ERROR: new_t: out of mem: > sip ser[17671]: ERROR: t_newtran: new_t failed >sip ser[17671]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) >sip ser[17671]: Warning: sl_send_reply: I won't send a reply for ACK!! >sip ser[17669]: ERROR: sip_msg_cloner: cannot allocate memory >sip ser[17669]: ERROR: new_t: out of mem: >sip ser[17669]: ERROR: t_newtran: new_t failed >sip ser[17669]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) >sip ser[17669]: Warning: sl_send_reply: I won't send a reply for ACK!! >sip ser[17669]: ERROR: sip_msg_cloner: cannot allocate memory >sip ser[17669]: ERROR: new_t: out of mem: >sip ser[17669]: ERROR: t_newtran: new_t failed >sip ser[17669]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) > >this is my latest mem info: ># free > total used free shared buffers cached >Mem: 2074376 2019056 55320 0 75972 1517308 >-/+ buffers/cache:425776 1648600 >Swap: 2031608 0 2031608 > >thanks > >On 6/21/07, Hendrik Scholz <<mailto:hendrik.scholz@freenet-ag.de>hendrik.scholz(a)freenet-ag.de > wrote: >Hi! > >Arun Kumar wrote: >> Hi All, > >quite an appropriate greeting for both serusers at Iptel and OpenSER. > >> please can some one tell me is there any memory leak with ser-0.9.6. It >> runs fine for few days and then starts some memory related problems in >> that case I've to restart my ser. > >from one of your previous mails I got this: ># free >total used free shared buffers cached >Mem: 2074376 1740724 333652 0 72328 1280192 >-/+ buffers/cache: 388204 1686172 >Swap: 2031608 0 2031608 > >If you take a close look at the numbers you'll see that (minus >buffers/cache) you have 1.6GB of memory left. > > >> I've 2GB of physical RAM in my machine >> with Quad Core cpu. but now I've only 70MB free out of 2 GB in max 1 day >> It will start to give me again error. > >Which error? >Please paste a few (reoccuring) messages from your SER logs. > >Cheers, >Hendrik > >-- >Hendrik Scholz >VoIP Systems Engineer > >---------------------------------------------------------------------------- >Telefon: + 49 (0) 431 90 20 552 >Telefax: + 49 (0) 431 90 20 559 >E-Mail: <mailto:hendrik.scholz@freenet.ag>hendrik.scholz(a)freenet.ag >Website: <http://www.freenet.de>www.freenet.de; <http://www.mobilcom.de>www.mobilcom.de >---------------------------------------------------------------------------- >freenet Cityline GmbH >Ein Unternehmen der freenet AG >Hamburger Chaussee 2-4 >24114 Kiel >---------------------------------------------------------------------------- >Geschäftsführer: Eckhard Spoerr, Axel Krieger >Amtsgericht Kiel, HRB 6202 > > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[OpenSER-Users] The Via Header of CANCEL Message
by 凌芳瑜 26 Jun '07

26 Jun '07

According to RFC 3665 section 3.8 and RFC 3261 section 9, there is only one via header in CANCEL message (message F11, F13 at page 72 of RFC 3665). But when I ran the similar scenario(through one proxy), I got two via header in CANCEL message such as following: CANCEL sip:UA12@node11.under.test.com;transport=udp SIP/2.0 Record-Route: <sip:192.0.50.50;lr=on;ftag=11380> Via: SIP/2.0/UDP ss.under.test.com;branch=z9hG4bKd068.25909417.0 Via: SIP/2.0/UDP node.under.test.com:5060;received=192.0.10.10;branch=z9hG4bKPUA4295483 Max-Forwards: 69 From: UA11 <sip:UA11@under.test.com>;tag=11380 To: <sip:UA12@under.test.com> Call-ID: 11380(a)tom.example.com CSeq: 4 CANCEL Content-Length: 0 P-hint: usrloc applied How can I remove the 2nd via header? Thank you Fangyu Ling

1 0

[OpenSER-Users] problem with asterisk and ser
by Frank Cases 25 Jun '07

25 Jun '07

SER 1 ip (1.2.3.4) Asterisk 2 ip's same nic as aliases.. same subnet as ser.. (1.2.3.5,1.2.3.6) If I call asterisk from SER and asterisk has 2 ips When I call asterisk . SER (1.2.3.4 ) INVITE to Asterisk (1.2.3.5) Asterisk answer (100 Trying ) from another ip Asterisk back (100 Trying ) to SER from (1.2.3.6) to (1.2.3.4) Anyway to fix ?

1 0

[OpenSER-Users] pronunciation?
by A.M. 25 Jun '07

25 Jun '07

I wasn't able to find this question answered in the FAQ: What is the preferred English-language pronunciation of "OpenSER"? -M

2 1

[Serusers] SER RTCP
by Arun Kumar 25 Jun '07

25 Jun '07

Hi how do I enable RTCP in ser ? thanks arun

1 0

[OpenSER-Users] Usrloc db_mode = 3 (DB_ONLY)
by Graham Markall 25 Jun '07

25 Jun '07

Hi, I am just getting started with openser (using openser-1.2.1) and have run across a problem I cannot seem to solve. When using db_mode=2 for the usrloc module, everything works fine. However, when db_mode is set to 3, calls are not able to be made - it seems that lookup("location") always fails. I see this in the log: Jun 25 16:35:17 cobalt1 /usr/local/sbin/openser[10084]: check_response(): Authorization is OK Jun 25 16:35:17 cobalt1 /usr/local/sbin/openser[10084]: check_username(): Digest username and URI username match Jun 25 16:35:17 cobalt1 /usr/local/sbin/openser[10084]: DEBUG:usrloc:db_load_urecord: aor not found in DB Jun 25 16:35:17 cobalt1 /usr/local/sbin/openser[10084]: lookup(): '1002' Not found in usrloc Having checked the mysql query log, the query that was run is: 130 Query select contact,expires,q,callid,cseq,flags,cflags,user_agent,received,path,sock et,methods, last_modified from location where username='1001'order by q If I run this query myself at the mysql command prompt, I get exactly one row returned: +-----------------------------------------------------+----------------- ----+-------+-------------------------------+-------+-------+--------+-- ----------------------------+----------+------+---------------------+--- ------+---------------------+ | contact | expires | q | callid | cseq | flags | cflags | user_agent | received | path | socket | methods | last_modified | +-----------------------------------------------------+----------------- ----+-------+-------------------------------+-------+-------+--------+-- ----------------------------+----------+------+---------------------+--- ------+---------------------+ | sip:1001@192.168.0.25:5062;transport=udp;user=phone | 2007-06-25 17:34:59 | -1.00 | bd348eeee82e4349(a)192.168.0.25 | 20092 | 0 | 0 | Grandstream GXP2000 1.1.2.27 | NULL | NULL | udp:172.16.1.1:5060 | 8063 | 2007-06-25 16:34:59 | +-----------------------------------------------------+----------------- ----+-------+-------------------------------+-------+-------+--------+-- ----------------------------+----------+------+---------------------+--- ------+---------------------+ 1 row in set (0.00 sec) Having followed through the code, in modules/usrloc/udomain.c (about line 550), things seem to be going wrong for me in this bit of code: if (ul_dbf.query(_c, keys, 0, vals, columns, (use_domain)?2:1, 13, order, &res) < 0) { LOG(L_ERR, "ERROR:usrloc:db_load_urecord: db_query failed\n"); return 0; } if (RES_ROW_N(res) == 0) { DBG("DEBUG:usrloc:db_load_urecord: aor not found in DB\n"); ul_dbf.free_result(_c, res); return 0; } I tried to find out why this is happening by attaching with gdb, but when I try to view res or res->n, I get a message that variable res is currently unavailable - I'm not sure if this is something to do with the way I'm using gdb though. When I step through, RES_ROW_N(res) == 0 must be true as it enters the code within the {} instead of skipping over it. Could anyone point me in the right direction as to why this doesn't work please? Many thanks, Graham Markall

1 0

[OpenSER-Users] XCAP Client on OpenSER
by Toni Barata 25 Jun '07

25 Jun '07

Hi all, Openser works pretty well as Presence Server, but on this development stage (version 1.2.x) the communication with XCAP Server is done via mysql (xcap_xml table). The integration with XCAP-Lite works this way and works Ok. However, SER has a library with XCAP-Client interface and we have started an integration of that library on the presence module of Openser. With this standard approach becomes possible the integration of the Openser Presence Server with, not only the XCAP-Lite, but also with others XCAP Servers, e.g., OpenXDM (https://openxdm.dev.java.net/). To have this integration accomplish get into the following steps: Libxcap Instalation: tar xvzf ser-2.0.0+cvs20070315_src.tar.gz cd ser-2.0.0+cvs20070315/lib/cds/ make install cd ../xcap/ make install export LD_LIBRARY_PATH=/usr/local/lib ( execute before starting openser) Run the attached patch: cd openser-1.2.x (openser's root) cp ../xcap_interface.diff . (Copy the patch to openser's root) patch -p1 <xcap_interface.diff (apply the patch ) Compile Openser, or if it is already compilied, just compile and install the presence module: make modules=modules/presence modules cp modules/presence/presence.so /usr/local/lib/openser/modules/ Add the XCAP configuration parameters on the Openser configuration file (openser.cfg): "... modparam("presence", "xcap_server", "http://x.x.x.x") modparam("presence", "xcap_root", "xcap-root") modparam("presence", "xcap_app_usage", "org.openmobilealliance.pres-rules") modparam("presence", "xcap_document_name", "presrules") modparam("presence", "xcap_auth_username", "openser") modparam("presence", "xcap_auth_password", "openserrw") ..." The integration was done with the following versions: openser-1.2.x-svn-20070517-221101.tgz (http://www.openser.org/downloads/snapshots/openser-1.2.x/) ser-2.0.0+cvs20070315_src.tar.gz (http://ftp.iptel.org/pub/ser/daily-snapshots/testing/) With this modification, when the Presence Servers need to consult a client's pres-rules it can do a XCAP Get instead of a MySql Query. This approach is closer to the OMA Presence SIMPLE + OMA XDM standards. Try it, test it and give us some feedback about it. If you have difficulties on the installation or configuration please contact us. Best Regards, Toni

1 0

[OpenSER-Users] OpenSER Attributes sending to RADIUS
by liran tal 25 Jun '07

25 Jun '07

Hey everyone, After quite a bit of google digging I've came across Dimitry's mail that cleared up some things that weren't so obvious in the documentation of the ACC module. He gave the example of using the following code: modparam("acc", "radius_extra", "Sip-UA=$hdr(User-Agent);Sip-Via=$hdr(Via[*]); Sip-SDP=$rb") Which in his case makes use of the Sip-UA, Sip-Via and Sip-SDP attributes but in the dictionary.sip file provided with openser/radiusclient-ng these attribute aren't present, there are other sets of attributes but not these... And so, I tried adding myself some custom attributes to both dictionary files, the one on the freeradius server and the other on openser's radiusclient-ng server and tried for example this: ATTRIBUTE Sip-Src-IP 900 string ATTRIBUTE Sip-Src-Port 901 string ATTRIBUTE Sip-Hdr-Contact 902 string ATTRIBUTE Sip-Hdr-UA 903 string ATTRIBUTE Sip-Hdr-From 904 string ATTRIBUTE Sip-Hdr-Media 905 string And then I put in openser's cfg: modparam("acc", "radius_extra", "Sip-Src-IP=$si") But it doesn't work, the accounting record on the freeradius server doesn't show the Sip-Src-IP attribute. If I change the modparam to use Sip-User-Realm which is defined in the original dictionary.sip on both servers then THAT IS added to the accounting record... my question is why? And the second question, is there a more extensive dictionary.sip file? How is it possible to add my own custom attributes as well? Thanks, Liri.

1 0

RE: [OpenSER-Users] RE: [Users] out of memory - please help
by Papadopoulos Georgios 25 Jun '07

25 Jun '07

> -----Original Message----- > From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > Sent: Monday, June 25, 2007 9:28 AM > To: Papadopoulos Georgios > Cc: Bogdan-Andrei Iancu; users(a)openser.org > Subject: Re: [OpenSER-Users] RE: [Users] out of memory - please help > > > > Papadopoulos Georgios wrote: > > Why did this only appear on the first receiver child? I > would expect > > that all children receive an equal amount of traffic so they should > > all run out of memory more or less at the same time. Except > if when a > > message is received, Openser finds the first available > child and does > > this by trying child 1,2,3... Is this the case? > > The distribution between the UDP listener threads is not done > by openser but by the OS. openser will open port 5060 and > then fork the process "children=..." times. Then, all > processes will read from the same port. > Then how do you explain that only the first child ran out of memory? Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[OpenSER-Users] openser routing question
by Radu Spineanu 25 Jun '07

25 Jun '07

Hi, I've been trying to setup a openser + asterisk server following the tutorial here: http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+With+Op… and with that openser configuration example. The only difference in my setup is that I am using openser 1.1. For some reason it doesn't seem to be working, the call is not established. This is the debugging output: /usr/sbin/openser[26006]: SIP Request: /usr/sbin/openser[26006]: method: <INVITE> /usr/sbin/openser[26006]: uri: <sip:101@217.73.174.13> /usr/sbin/openser[26006]: version: <SIP/2.0> /usr/sbin/openser[26006]: parse_headers: flags=2 /usr/sbin/openser[26006]: Found param type 235, <rport> = <n/a>; state=6 /usr/sbin/openser[26006]: Found param type 232, <branch> = <z9hG4bKapseucta>; state=16 /usr/sbin/openser[26006]: end of header reached, state=5 /usr/sbin/openser[26006]: parse_headers: Via found, flags=2 /usr/sbin/openser[26006]: parse_headers: this is the first via /usr/sbin/openser[26006]: After parse_msg... /usr/sbin/openser[26006]: preparing to run routing scripts... /usr/sbin/openser[26006]: parse_headers: flags=100 /usr/sbin/openser[26006]: DEBUG:maxfwd:is_maxfwd_present: value = 70 /usr/sbin/openser[26006]: parse_headers: flags=10 /usr/sbin/openser[26006]: DEBUG:parse_to:end of header reached, state=10 /usr/sbin/openser[26006]: DBUG:parse_to: display={}, ruri={sip:101@217.73.174.13} /usr/sbin/openser[26006]: DEBUG: get_hdr_field: <To> [25]; uri=[sip:101@217.73.174.13] /usr/sbin/openser[26006]: DEBUG: to body [<sip:101@217.73.174.13>^M ] /usr/sbin/openser[26006]: DEBUG: add_param: tag=hsiim /usr/sbin/openser[26006]: DEBUG:parse_to:end of header reached, state=29 /usr/sbin/openser[26006]: DBUG:parse_to: display={"Radu Spineanu"}, ruri={sip:100@217.73.174.13} /usr/sbin/openser[26006]: parse_headers: flags=200 /usr/sbin/openser[26006]: get_hdr_field: cseq <CSeq>: <797> <INVITE> /usr/sbin/openser[26006]: DEBUG: get_hdr_body : content_length=303 /usr/sbin/openser[26006]: found end of header /usr/sbin/openser[26006]: find_first_route: No Route headers found /usr/sbin/openser[26006]: loose_route: There is no Route HF /usr/sbin/openser[26006]: grep_sock_info - checking if host==us: 13==13 && [217.73.174.13] == [217.73.174.13] /usr/sbin/openser[26006]: grep_sock_info - checking if port 5060 matches port 5060 /usr/sbin/openser[26006]: grep_sock_info - checking if host==us: 13==13 && [217.73.174.13] == [217.73.174.13] /usr/sbin/openser[26006]: grep_sock_info - checking if port 5060 matches port 5060 /usr/sbin/openser[26006]: DEBUG: has_totag: no totag /usr/sbin/openser[26006]: DEBUG: has_totag: no totag /usr/sbin/openser[26006]: is_user_in(): User is not in group 'voicemail' /usr/sbin/openser[26006]: rewrite_uri: Rewriting Request-URI with 'sip:101@82.79.243.82:5068' /usr/sbin/openser[26006]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26006]: DEBUG: t_newtran: msg id=2 , global msg id=0 , T on entrance=0xffffffffffffffff /usr/sbin/openser[26006]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26006]: parse_headers: flags=78 /usr/sbin/openser[26006]: t_lookup_request: start searching: hash=18702, isACK=0 /usr/sbin/openser[26006]: DEBUG: RFC3261 transaction matching failed /usr/sbin/openser[26006]: DEBUG: t_lookup_request: no transaction found /usr/sbin/openser[26006]: DEBUG:tm:t_relay: new INVITE /usr/sbin/openser[26006]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26006]: check_via_address(217.73.174.16, 82.79.243.82, 0) /usr/sbin/openser[26006]: WARNING:vqm_resize: resize(0) called /usr/sbin/openser[26006]: DEBUG:tm:_reply_light: reply sent out. buf=0x5e6458: SIP/2.0 1..., shmem=0x2b05574b9fb8: SIP/2.0 1 /usr/sbin/openser[26006]: DEBUG:tm:_reply_light: finished /usr/sbin/openser[26006]: DEBUG: mk_proxy: doing DNS lookup... /usr/sbin/openser[26006]: check_via_address(217.73.174.16, 82.79.243.82, 0) /usr/sbin/openser[26006]: DEBUG: add_to_tail_of_timer[4]: 0x2b05574b7ba0 /usr/sbin/openser[26006]: DEBUG: add_to_tail_of_timer[0]: 0x2b05574b7bc0 /usr/sbin/openser[26006]: SER: new transaction fwd'ed /usr/sbin/openser[26006]: DEBUG:tm:UNREF_UNSAFE: after is 0 /usr/sbin/openser[26006]: DEBUG:destroy_avp_list: destroying list (nil) /usr/sbin/openser[26006]: receive_msg: cleaning up /usr/sbin/openser[26012]: DEBUG: timer routine:4,tl=0x2b05574b7ba0 next=(nil) /usr/sbin/openser[26012]: DEBUG: retransmission_handler : request resending (t=0x2b05574b79c0, INVITE si ... ) /usr/sbin/openser[26012]: DEBUG: add_to_tail_of_timer[5]: 0x2b05574b7ba0 /usr/sbin/openser[26012]: DEBUG: retransmission_handler : done amy /usr/sbin/openser[26012]: DEBUG: timer routine:5,tl=0x2b05574b7ba0 next=(nil) amy /usr/sbin/openser[26012]: DEBUG: retransmission_handler : request resending (t=0x2b05574b79c0, INVITE si ... ) amy /usr/sbin/openser[26012]: DEBUG: add_to_tail_of_timer[6]: 0x2b05574b7ba0 amy /usr/sbin/openser[26012]: DEBUG: retransmission_handler : done [..] Jun 24 15:38:47 amy /usr/sbin/openser[26012]: DEBUG: timer routine:0,tl=0x2b05574b7bc0 next=(nil) /usr/sbin/openser[26012]: DEBUG: final_response_handler:stop retr. and send CANCEL (0x2b05574b79c0) /usr/sbin/openser[26012]: DEBUG:tm:t_should_relay_response: T_code=100, new_code=408 /usr/sbin/openser[26012]: DEBUG:tm:t_pick_branch: picked branch 0, code 408 /usr/sbin/openser[26012]: DEBUG:tm:relay_reply: branch=0, save=0, relay=0 /usr/sbin/openser[26012]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26012]: check_via_address(217.73.174.16, 82.79.243.82, 0) /usr/sbin/openser[26012]: DEBUG: add_to_tail_of_timer[4]: 0x2b05574b7ae8 /usr/sbin/openser[26012]: DEBUG: add_to_tail_of_timer[0]: 0x2b05574b7b08 /usr/sbin/openser[26012]: DEBUG:tm:relay_reply: sent buf=0x5e4fb0: SIP/2.0 4..., shmem=0x2b05574b9fb8: SIP/2.0 4 /usr/sbin/openser[26012]: DEBUG: final_response_handler : done /usr/sbin/openser[26012]: DEBUG: timer routine:7,tl=0x2b05574b7ba0 next=(nil) /usr/sbin/openser[26006]: SIP Request: /usr/sbin/openser[26006]: method: <ACK> /usr/sbin/openser[26006]: uri: <sip:101@217.73.174.13> /usr/sbin/openser[26006]: version: <SIP/2.0> /usr/sbin/openser[26006]: parse_headers: flags=2 /usr/sbin/openser[26006]: Found param type 235, <rport> = <n/a>; state=6 /usr/sbin/openser[26006]: Found param type 232, <branch> = <z9hG4bKapseucta>; state=16 /usr/sbin/openser[26006]: end of header reached, state=5 /usr/sbin/openser[26006]: parse_headers: Via found, flags=2 /usr/sbin/openser[26006]: parse_headers: this is the first via /usr/sbin/openser[26006]: After parse_msg... /usr/sbin/openser[26006]: preparing to run routing scripts... /usr/sbin/openser[26006]: DEBUG : sl_filter_ACK: to late to be a local ACK! /usr/sbin/openser[26006]: parse_headers: flags=100 /usr/sbin/openser[26006]: DEBUG:maxfwd:is_maxfwd_present: value = 70 /usr/sbin/openser[26006]: parse_headers: flags=10 /usr/sbin/openser[26006]: DEBUG: add_param: tag=90f6b651c515331ae78169ff327ec50d-6648 /usr/sbin/openser[26006]: DEBUG:parse_to:end of header reached, state=29 /usr/sbin/openser[26006]: DBUG:parse_to: display={}, ruri={sip:101@217.73.174.13} /usr/sbin/openser[26006]: DEBUG: get_hdr_field: <To> [67]; uri=[sip:101@217.73.174.13] /usr/sbin/openser[26006]: DEBUG: to body [<sip:101@217.73.174.13>] /usr/sbin/openser[26006]: DEBUG: add_param: tag=hsiim /usr/sbin/openser[26006]: DEBUG:parse_to:end of header reached, state=29 /usr/sbin/openser[26006]: DBUG:parse_to: display={"Radu Spineanu"}, ruri={sip:100@217.73.174.13} /usr/sbin/openser[26006]: parse_headers: flags=200 /usr/sbin/openser[26006]: get_hdr_field: cseq <CSeq>: <797> <ACK> /usr/sbin/openser[26006]: DEBUG: get_hdr_body : content_length=0 /usr/sbin/openser[26006]: found end of header /usr/sbin/openser[26006]: find_first_route: No Route headers found /usr/sbin/openser[26006]: loose_route: There is no Route HF /usr/sbin/openser[26006]: grep_sock_info - checking if host==us: 13==13 && [217.73.174.13] == [217.73.174.13] /usr/sbin/openser[26006]: grep_sock_info - checking if port 5060 matches port 5060 /usr/sbin/openser[26006]: grep_sock_info - checking if host==us: 13==13 && [217.73.174.13] == [217.73.174.13] /usr/sbin/openser[26006]: grep_sock_info - checking if port 5060 matches port 5060 /usr/sbin/openser[26006]: rewrite_uri: Rewriting Request-URI with 'sip:101@82.79.243.82:5068' /usr/sbin/openser[26006]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26006]: DEBUG: t_newtran: msg id=3 , global msg id=2 , T on entrance=0xffffffffffffffff /usr/sbin/openser[26006]: parse_headers: flags=ffffffffffffffff /usr/sbin/openser[26006]: parse_headers: flags=78 /usr/sbin/openser[26006]: t_lookup_request: start searching: hash=18702, isACK=1 /usr/sbin/openser[26006]: DEBUG: RFC3261 transaction matched, tid=apseucta /usr/sbin/openser[26006]: DEBUG:tm:REF_UNSAFE: after is 1 /usr/sbin/openser[26006]: DEBUG: t_lookup_request: transaction found (T=0x2b05574b79c0) /usr/sbin/openser[26006]: DEBUG: cleanup_uac_timers: RETR/FR timers reset /usr/sbin/openser[26006]: DEBUG: add_to_tail_of_timer[2]: 0x2b05574b7a40 /usr/sbin/openser[26006]: DEBUG:tm:UNREF_UNSAFE: after is 0 /usr/sbin/openser[26006]: DEBUG:destroy_avp_list: destroying list (nil) /usr/sbin/openser[26006]: receive_msg: cleaning up /usr/sbin/openser[26012]: DEBUG: timer routine:0,tl=0x2b05574b7b08 next=(nil) /usr/sbin/openser[26012]: DEBUG: timer routine:4,tl=0x2b05574b7ae8 next=(nil) /usr/sbin/openser[26012]: DEBUG: timer routine:2,tl=0x2b05574b7a40 next=(nil) /usr/sbin/openser[26012]: DEBUG: wait_handler : removing 0x2b05574b79c0 from table /usr/sbin/openser[26012]: DEBUG: delete transaction 0x2b05574b79c0 /usr/sbin/openser[26012]: DEBUG: wait_handler : done And this an ngrep output: U 217.73.174.16:5063 -> 217.73.174.13:5060 INVITE sip:101@217.73.174.13 SIP/2.0..Via: SIP/2.0/UDP 82.79.243.82:5063;rport;branch=z9hG4bKlejwtozv..Max-Forwards: 70..To: <sip:101@217 .73.174.13>..From: "Radu Spineanu" <sip:100@217.73.174.13>;tag=lewnx..Call-ID: pfysegloyvynryc@82.79.243.82..CSeq: 305 INVITE..Contact: < sip:100@82.79.243.82:5063>..Content-Type: application/sdp..Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INFO..Suppor ted: replaces,norefersub,100rel..User-Agent: Twinkle/1.0.1..Content-Length: 303....v=0..o=100 246106612 367660894 IN IP4 82.79.243.82..s= -..c=IN IP4 82.79.243.82..t=0 0..m=audio 8012 RTP/AVP 98 97 8 0 3 101..a=rtpmap:98 speex/16000..a=rtpmap:97 speex/8000..a=rtpmap:8 PCMA/8 000..a=rtpmap:0 PCMU/8000..a=rtpmap:3 GSM/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=ptime:20.. # U 217.73.174.13:5060 -> 217.73.174.16:5063 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP 82.79.243.82:5063;rport=5063;branch=z9hG4bKlejwtozv;received=217.73. 174.16..To: <sip:101@217.73.174.13>..From: "Radu Spineanu" <sip:100@217.73.174.13>;tag=lewnx..Call-ID: pfysegloyvynryc@82.79.243.82..CSeq : 305 INVITE..Server: OpenSer (1.1.0-notls (x86_64/linux))..Content-Length: 0..Warning: 392 217.73.174.13:5060 "Noisy feedback tells: pi d=26007 req_src_ip=217.73.174.16 req_src_port=5063 in_uri=sip:101@217.73.174.13 out_uri=sip:101@82.79.243.82:5068 via_cnt==1".... # U 217.73.174.13:5060 -> 82.79.243.82:5068 INVITE sip:101@82.79.243.82:5068 SIP/2.0..Record-Route: <sip:217.73.174.13;lr=on;ftag=lewnx>..Via: SIP/2.0/UDP 217.73.174.13;branch=z9hG4 bK4a11.a2772f67.0..Via: SIP/2.0/UDP 82.79.243.82:5063;received=217.73.174.16;rport=5063;branch=z9hG4bKlejwtozv..Max-Forwards: 69..To: <si p:101@217.73.174.13>..From: "Radu Spineanu" <sip:100@217.73.174.13>;tag=lewnx..Call-ID: pfysegloyvynryc@82.79.243.82..CSeq: 305 INVITE..C ontact: <sip:100@82.79.243.82:5063>..Content-Type: application/sdp..Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INF O..Supported: replaces,norefersub,100rel..User-Agent: Twinkle/1.0.1..Content-Length: 303..P-hint: usrloc applied....v=0..o=100 246106612 367660894 IN IP4 82.79.243.82..s=-..c=IN IP4 82.79.243.82..t=0 0..m=audio 8012 RTP/AVP 98 97 8 0 3 101..a=rtpmap:98 speex/16000..a=rtpmap :97 speex/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:0 PCMU/8000..a=rtpmap:3 GSM/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=pt ime:20.. # U 217.73.174.13:5060 -> 82.79.243.82:5068 INVITE sip:101@82.79.243.82:5068 SIP/2.0..Record-Route: <sip:217.73.174.13;lr=on;ftag=lewnx>..Via: SIP/2.0/UDP 217.73.174.13;branch=z9hG4 bK4a11.a2772f67.0..Via: SIP/2.0/UDP 82.79.243.82:5063;received=217.73.174.16;rport=5063;branch=z9hG4bKlejwtozv..Max-Forwards: 69..To: <si p:101@217.73.174.13>..From: "Radu Spineanu" <sip:100@217.73.174.13>;tag=lewnx..Call-ID: pfysegloyvynryc@82.79.243.82..CSeq: 305 INVITE..C ontact: <sip:100@82.79.243.82:5063>..Content-Type: application/sdp..Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,PRACK,REFER,NOTIFY,SUBSCRIBE,INF O..Supported: replaces,norefersub,100rel..User-Agent: Twinkle/1.0.1..Content-Length: 303..P-hint: usrloc applied....v=0..o=100 246106612 367660894 IN IP4 82.79.243.82..s=-..c=IN IP4 82.79.243.82..t=0 0..m=audio 8012 RTP/AVP 98 97 8 0 3 101..a=rtpmap:98 speex/16000..a=rtpmap :97 speex/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:0 PCMU/8000..a=rtpmap:3 GSM/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=pt ime:20.. # Initially I did the setup folowing http://www.openser.org/dokuwiki/doku.php/asterisk:realtime-integration which worked but didn't have voicemail redirection support. Thanks and sorry for the long mail, Radu Spineanu

1 1

[OpenSER-Users] Insert a Header into ACK message
by 凌芳瑜 25 Jun '07

25 Jun '07

Dear All: I've tried many methods to add Max-Forwarsd header into ACK message (message 8), all methods I tried were fail. According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK message. Can anyone tell me how to add a header into ACK message? Thank you very much. UA11 : NUT(Proxy 1) : UA12 | : | : | |-------:------->| : | 1. INVITE |<------:--------| : | 2. 407 |-------:------->| : | 3. ACK | : | : | |-------:------->| : | 4. INVITE | : |-------:------->| 5. INVITE |<------:--------| : | 6. 100 | : | : | | : |<------:--------| 7. 486 (Busy Here) | : | : | | : |-------:------->| 8. ACK | : | : | |<------:--------| : | 9. 486 | : | : | |-------:------->| : |10. ACK | : | : | Best Regards, Fangyu Ling

4 9

[OpenSER-Users] LCR and replies GW
by Frank Cases 25 Jun '07

25 Jun '07

Here it is.. We are trying to keep the prefix, in a header or a avp or something.. So we want to use the prefix to log a certain gw used.. Usually calls come from A to SER to other Term boxes. The problem is once I load_gw() then I cannot use the values. EX: on invite I do some checking , then load_gw.. If gw is box X.. then we add a prefix 2312 lets say. Upon reply I cannot get that value back even in $ruri Although I can set anything in the invite before leaving . Also tried add_rr_param but no go.. Any ideas ? Basically on : onreply_route[1] { if(is_method("INVITE") && ($rs==183) ) { # DO STUFF I need to access the gateway it used from here.. } }

2 1

[Serusers] SMS support
by Andrey Kuprianov 25 Jun '07

25 Jun '07

Hi, Has anyone ever tried using an SMS module and actually sent a message? Andrey.

2 2

[Serusers] XCAP authorization - how to set the username in the xcap root without domain part
by tzieleniewski 25 Jun '07

25 Jun '07

Hi, How can configure pa module in such a way that it will look for the particular user presence document in the "...pres-rules/users/user/.." instead of "../pres-rules/users/user@domain/..". Cheers tomasz

2 3

Re: [OpenSER-Users] how to calculate PDD and ASR
by raviprakash sunkara 25 Jun '07

25 Jun '07

On 6/25/07, ram <talk2ram(a)gmail.com> wrote: > > Google for more information to learn > > any way for your disctionary > > Post Dialing Delay PDD > If the reqeust is Delay.. then can u do , redialing by using the avp modules. This is take place on failover case... Automatic Speech Recognition *ASR* > This ASR , openSER can't do ASR , u need to forward this to Asterisk or PBX servers... On 6/25/07, raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> wrote: > > > > > > > > On 6/25/07, ram <talk2ram(a)gmail.com > wrote: > > > > > > Hi > > > > > > iam using openser with mysql accounting > > > > > > can some one assist me how to calculate ASR and PDD > > > > > > > can abbreviate the ASR and PDD . > > > > > > for the calls > > > > > > recomend some documentation to read would be great > > > > > > ram > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)openser.org > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > > > -- > > Thanks &Regards > > Ravi Prakash Sunkara > > > -- Thanks &Regards Ravi Prakash Sunkara

2 1

[Serusers] Help cant connect using natconfig
by Kirk McCalla 25 Jun '07

25 Jun '07

Hello all I have set up ser and I am able to use the sample config to get ser running within my NAT. Now I am trying to get external users to connect to my ser which is behind a nat device. Whenever I use the sample config I can make calls inside my netkwork. whenever I use the nat config that I have below. I cannot even get my local devices to speak to each other. Can someone help here. Whenever I start ser with this config this is what ther system does. ser dead but subsys locked <serusers(a)lists.iptel.org> This is the config that I am using # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # !! Nathelper loadmodule "/usr/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # !! Nathelper modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; }

2 1

[Serusers] Odd error message....
by SIP 25 Jun '07

25 Jun '07

We've never seen this one come through before, so I'm thinking it's in some way related to the cortelco US that's being used. Jun 24 10:15:26 proxy ser[7081]: ACC: call missed: method=INVITE, i-uri=sip:1101XXXXXXX@CLIENT.IP.ADDRESS:60001, o-uri=sip:1101XXXXXXX@CLIENT.IP.ADDRESS:60001, call_id=53ca8e9573a1aa535700119a21ce693c(a)CLIENT.IP.ADDRESS, from=<sip:1315XXXXXXX@our.proxy.com>;tag=as67cfdba3, code=410 Gone Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_uri: uri too short: <2.0> (3) Jun 24 10:15:26 proxy ser[7073]: is_user_in(): Error while parsing URI Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_uri: uri too short: <2.0> (3) Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_sip_msg_uri: bad uri <2.0> Jun 24 10:15:26 proxy ser[7073]: loose_route: Error while parsing Request URI Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_uri: uri too short: <2.0> (3) Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_sip_msg_uri: bad uri <2.0> Jun 24 10:15:26 proxy ser[7073]: WARNING: do_action:error in expression Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_uri: uri too short: <2.0> (3) Jun 24 10:15:26 proxy ser[7073]: ERROR: parse_sip_msg_uri: bad uri <2.0> This is on a response to the reinvite BACK to the local user (1101XXXXXXX) from the PSTN (1315XXXXXXX). The actual block looks like: U CLIENT.IP.ADDRESS:60001 -> OUR.PROXY.IP.ADDRESS:5060 SIP/2.0 410 Gone. Via: SIP/2.0/UDP OUR.PROXY.IP.ADDRESS:5060;branch=z9hG4bKffae.1a137353.0. Via: SIP/2.0/UDP OUR.PSTN.GATEWAY.ADDRESS:5090;branch=z9hG4bK338d81c7;rport=5090. From: <sip:1315XXXXXXX@our.proxy.com>;tag=as67cfdba3. To: "David Jarrett" <sip:1101XXXXXXX@our.proxy.com>;tag=53c99d61. Contact: <sip:1101XXXXXXX@CLIENT.IP.ADDRESS:60001>. Call-ID: 53ca8e9573a1aa535700119a21ce693c(a)CLIENT.IP.ADDRESS. CSeq: 102 INVITE. Content-Length: 0. I'm really not sure which part of the URI is too short (or, to be honest, why SER spits out that message). Clearly '2.0' is not a valid URI... but I'm not entirely sure where it's getting that as the URI. Ideas? We're running 0.9.6. N.

2 1

[OpenSER-Users] RE: [Users] out of memory - please help
by Papadopoulos Georgios 25 Jun '07

25 Jun '07

Hi Bogdan, The server has been running for about 18 hours without any "out of memory" messages. Usually these appeared after a few hours. I think it is fixed, but I will keep you posted if it reappears. Thanks a lot! I guess the same fix needs to go in subst_uri() and maybe also add a check if(result->s!=0) ? Why did this only appear on the first receiver child? I would expect that all children receive an equal amount of traffic so they should all run out of memory more or less at the same time. Except if when a message is received, Openser finds the first available child and does this by trying child 1,2,3... Is this the case? Last (related?) question: There is a thread that the first receiver child starts, what is its purpose? Thank you George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Thursday, June 21, 2007 4:32 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] out of memory - please help > > Hi George, > > I made a fix related to subst_user() - could you apply it > and give it a try? > > Thanks and regards, > Bogdan > > Papadopoulos Georgios wrote: > > Hi Bogdan, > > > > I am using all of the functions that you mentioned. I am also using > > subst(). Please, let me know if you need more info. > > > > best regards > > > > George > > > > > > > >> -----Original Message----- > >> From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >> Sent: Thursday, June 21, 2007 1:46 PM > >> To: Papadopoulos Georgios > >> Cc: users(a)openser.org > >> Subject: Re: [Users] out of memory - please help > >> > >> Hi George, > >> > >> looking over the log, it might be something wrong with > >> subst_str() function - I see a lot of memory allocated by this > >> function (3267 mem chunks). > >> > >> now, I have to trace the function using the subst_str() function > >> :)..So, are you using from script one of the following functions: > >> subst_uri() > >> subst_user() > >> avp_subst() > >> > >> regards, > >> bogdan > >> > >> Papadopoulos Georgios wrote: > >> > >>> Hello all, > >>> > >>> We have an ongoing issue with Openser running out of > memory after a > >>> few hours. It is very consistent which makes me believe it > >>> > >> is a memory > >> > >>> leak. Can someone look at the log file? I have done a mem dump on > >>> process 8573 which is the one that ran out of memory. Here > >>> > >> is the log: > >> > >>> _http://www.real.gr/files/openser.20070620.log.gz_ > >>> It always happens on the first receiver child. Our current > >>> > >> solution is > >> > >>> to restart Openser every few hours. I would like to solve > >>> > >> this at its > >> > >>> root, so please let me know if you need more info. > >>> My Openser is 1.2.x from svn, revision 2333. > >>> > >>> thank you for any help > >>> > >>> George > >>> > >>> > >>> > >>> > >>> Disclaimer > >>> > >>> The information in this e-mail and any attachments is > >>> > >> confidential. It > >> > >>> is intended solely for the attention and use of the named > >>> addressee(s). If you are not the intended recipient, or person > >>> responsible for delivering this information to the intended > >>> > >> recipient, > >> > >>> please notify the sender immediately. Unless you are the intended > >>> recipient or his/her representative you are not > authorized to, and > >>> must not, read, copy, distribute, use or retain this > message or any > >>> part of it. E-mail transmission cannot be guaranteed to be > >>> > >> secure or > >> > >>> error-free as information could be intercepted, corrupted, lost, > >>> destroyed, arrive late or incomplete, or contain viruses. > >>> > >>> > >>> > >> > --------------------------------------------------------------------- > >> - > >> > >>> -- > >>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)openser.org > >>> http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >> > > > > > >

3 2

[OpenSER-Users] Help with subst()...
by Sajith T S 25 Jun '07

25 Jun '07

Hi, This looks simple, but I just can't wrap my (feeble) brain around it: Can anyone give a subst() regexp and replacement string to snip out "+" characters in the From header field's display name as well as user part of the URI? (There's a PSTN gateway that sends in caller's number with a "+" prefix and our users do not like it since they can't call back without manually editing out the "+"...) Thanks, Sajith.

1 0

[OpenSER-Users] how to calculate PDD and ASR
by ram 25 Jun '07

25 Jun '07

Hi iam using openser with mysql accounting can some one assist me how to calculate ASR and PDD for the calls recomend some documentation to read would be great ram

1 0

[OpenSER-Users] Presence
by KUMAR 25 Jun '07

25 Jun '07

Hi all, Can anyone please suggest me some good place to learn presence in OpenSER using SIMPLE (except the RFC). thank you kumar

1 0

[Serusers] add prefix to source
by Szasz Szabolcs 24 Jun '07

24 Jun '07

Hi all I need to add a prefix to the source uri/number. How ca I do this? Can you help me guys? Thanks a lot Szasz Szabolcs -- This message was scanned for spam and viruses by BitDefender. For more information please visit http://linux.bitdefender.com/

1 0

[Serusers] Out-of-office-reply: Serusers Digest, Vol 50, Issue 24
by David.Monahan＠aepona.com 24 Jun '07

24 Jun '07

I am on vacation and will not have access to email until I return to the office on 4th July.

1 0

[OpenSER-Users] User-Agent
by Christian Heidinger 24 Jun '07

24 Jun '07

Is it possible to modify the User-Agent/Server [Server: OpenSER (1.2.1-notls(x86_64/linux)).] field that OpenSER sends out? We use a variety of open source projects in production and prefer to sheild their true identities for security reasons (ie. preventing us from becoming the next victim of the newest exploit).

2 1

[Serusers] Cannot register with iptel.org
by Andrey Kuprianov 23 Jun '07

23 Jun '07

Hi, Im not able to register my latest X-lite phone with iptel.org. It times out. Any idea why? Any additional setup parameters i need to know of? Andrey.

2 1

[OpenSER-Users] using remove_hf and append_hf in both route and failure route
by Mik Cheez 22 Jun '07

22 Jun '07

I use remove_hf and append_hf to modify the RPID in the Request_Route, which works fine, but then if I try it in Failure_Route I end up with two RPID headers. Is it possible the revert_uri() is doing something to it? If not, can you just not do a remove/append like this? I checked to make sure the remove_hf is returning true. I triple checked to make sure my variable contains only one header. Here are some snippets from my config: route { ... ... if (method=="INVITE") { perl_exec("command", "0"); /*sets rpid and ouri vars*/ if (is_avp_set("$avp(rpid)")){ if(is_present_hf("Remote-Party-ID")){ remove_hf("Remote-Party-ID"); } append_hf("$avp(rpid)"); } avp_pushto("$ru","$avp(ouri)"); ... ... failure_route[1]{ if(method == "INVITE" ....blah blah blah revert_uri(); perl_exec("command", "1"); /*sets rpid and ouri vars*/ if (is_avp_set("$avp(rpid)")){ if(is_present_hf("Remote-Party-ID")){ remove_hf("Remote-Party-ID"); } append_hf("$avp(rpid)"); } avp_pushto("$ru","$avp(ouri)"); ... ... Best regards, Mik Cheez

2 3

[OpenSER-Users] RE: [Users] out of memory - please help
by Papadopoulos Georgios 22 Jun '07

22 Jun '07

Hi Bogdan, Bad news, I am afraid. I got another "out of memory". I did another memory dump on process 10714 this time. Actually there is one dump that I did earlier to see if there were any segments allocated by subst_str. And I did a second dump after the "out of memory" happened. The log file is: http://www.real.gr/files/openser.20070622.log.gz thank you George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Friday, June 22, 2007 1:44 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] out of memory - please help > > Hi George, > > Papadopoulos Georgios wrote: > > Hi Bogdan, > > > > The server has been running for about 18 hours without any "out of > > memory" messages. Usually these appeared after a few hours. > I think it > > is fixed, but I will keep you posted if it reappears. Thanks a lot! > > > That is super! I will commit the patch on SVN. > > I guess the same fix needs to go in subst_uri() and maybe > also add a > > check if(result->s!=0) ? > > > well, in subst_uri() there is no need because the result->s > chunk is transferred to msg->new_uri (and freed later from > there); in subst_user(), the result->s chunk was copied by > the SET_USER_T action, so we need to free it also. > > Why did this only appear on the first receiver child? I > would expect > > that all children receive an equal amount of traffic so they should > > all run out of memory more or less at the same time. Except > if when a > > message is received, Openser finds the first available > child and does > > this by trying child 1,2,3... Is this the case? > > > this scheduling is done by kernel and there is no guarantee > of a uniform distribution in case of low traffic. > > Last (related?) question: There is a thread that the first receiver > > child starts, what is its purpose? > > > you mean a process (there are no threads in openser). it > might be a listener of mi_fifo. > > Regards, > Bogdan Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 2

[OpenSER-Users] DB_Extra and AVP Problem
by Alexandre dos Reis Ferreira 22 Jun '07

22 Jun '07

Hello All, I have a problem with db extra and AVP. Some times don’t log the values of AVP in the database. Script. Openser Version 1.2.1. ... modparam("acc", "db_extra", "from_uri=$fu;i_uri=$ou;o_uri=$ru;cod_op=$avp(s:cod_op);ip_do_originador=$si;flag_followme=$avp(s:flag_follow_me)") ... route[2] { ... $avp(s:cod_op) = $(rU{s.select,0,#}); xlog("L_ALERT", "Test_01 RURI=$rU AVP=$avp(s:cod_op) To=$tu IP=$si\n"); ... } Example using the scene of a call. For RURI = sip:06#022xxxxxxxx@domain.com I have the following result in logs: => Log file Jun 21 19:20:33 ser01-brt openser-1.2.1[14952]: Test_01 RURI=06#022xxxxxxxx AVP=06 To=sip:022xxxxxxxx@domain IP=x.x.x.x => Insert in database ( The values of cod_op and flag_follow_me is null) T 10.5.0.19:33875 -> 10.5.0.22:3306 [AP] insert into acc (method,from_tag,to_tag,callid,sip_code,sip_reason,time,from_uri,i_uri,o_uri,cod_op,ip_do_originador,flag_followme ) values ('INVITE','a7ba357706b2e329','as10700de1','1cefcf0885d9adbf(a)192.168.1.19','200','OK','2007-06-21 19:20:33','sip:6101@domain,'sip:022xxxxxxxx@domain','sip:06#022xxxxxxxx@x.x.x.x:5060;transport=udp',' ','x.x.x.x',' ') The problem is intermittent and occurs in 15% of the calls. Does anybody know how can i resolve this question? Best regards, Areis. No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.9.4/860 - Release Date: 21/6/2007 17:53

1 0

[Serusers] sip and rtp forwarding problem
by Martin Drasar 22 Jun '07

22 Jun '07

Hello everyone, I am a complete beginner with ser and I would like to ask you for a help. I have such scenario. There are MRCP servers (ASR and TTS) accessible only through PPTP vpn. Because I couldn't find PPTP client for Solaris, there is only one possible solution for me - to have linux box connect to vpn and act as a proxy and forward SIP and rtp packets between MRCP servers and Solaris. +-------------+ | PPTP VPN | | +-------+ | | | MRCP | | | +-------+ | | || | | || | | +---------+ | +-----------+ | |Linux box|=====|Solaris box| | +---------+ | +-----------+ +-------------+ As there is no way to make MRCP servers register with proxy, I was thinking about using call forwarding... When the MRCP servers are not registered with proxy (everytime) proxy should then forward the sip messages and rtp stream to their IP address (in fact I will be making call to unregistered UA, that proxy doesn't know but I do). Problem is that does not seem like a clean solution to me. Can you please give me some pointers how to solve this issue? Thanks in advance -- Martin Drasar, Developer / Analyst OptimSys, s.r.o. drasar(a)optimsys.cz Tel: +420 541 143 065 Fax: +420 541 143 066 http://www.optimsys.cz

2 2

[Serusers] tm matching forked replies with received parameter in branch
by samuel 22 Jun '07

22 Jun '07

Hi all, Just a question about transaction matching in SER 0.9.7: In a forked request, SER receives a reply with a ;received=IP parameter after the branch parameter in the Via header and I don't know if this can affect parallel forking because it does not CANCEL the other branches.... Thanks, Samuel.

3 4

Re: [Serusers] Quick resend of INVITEs
by Stephen Helfen 22 Jun '07

22 Jun '07

Nope...not in this case. Here, the originating UA sends one INVITE. My SER is sending the multiple INVITEs before it even receives a 100 Trying from the far end. It does not happen on every call...there seems to be no pattern as to when it does happen.Thanks.SteveDate: Fri, 22 Jun 2007 09:35:36 +0200From: greger(a)teigre.comTo: steve_helfen(a)hotmail.comCC: serusers(a)iptel.orgSubject: Re: [Serusers] Quick resend of INVITEs The originating UA may be where to look. g-) Stephen Helfen wrote: Sometimes my ser proxy resends an INVITE 67 milliseconds after the original INVITE without receiving any response from the recipient. Essentially, what would normally be a 1 second timer for a resend is vastly shortened with no real explanation. If there is a Trixbox at the other end, the conversation results in a dropped call as the Trixbox continues to send repeated 200 Oks, but does not acknowledge the ACKs to those messages. The Asterix supposedly has a fix for this issue that is not included in the Trixbox. What I am trying to determine, though, is WHY the double invites are sent in the first place. Thanks, Steve Live Earth is coming. Learn more about the hottest summer event - only on MSN. Check it out! _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ Make every IM count. Download Windows Live Messenger and join the i’m Initiative now. It’s free. http://im.live.com/messenger/im/home/?source=TAGWL_June07

2 1

[Users] presence
by KUMAR 22 Jun '07

22 Jun '07

Hi all, I am using openser-1.2.1+RTPProxy. I am using XLite as UA. I want to be able to store the buddy list of the users at the server. For this, I am using the presence module. But I cannot get it working. I have created the presence related tables in mysql. And those tables do show some information in them. I have attached my openser.cfg and the message dump from wireshark. The messages have been captured at the UA end. I also get the following message at the server. PRESENCE: handle_subscribe:Missing or unsupported event header field value 2(12452) PRESENCE:handle_subscribe: ERROR occured 2(12452) WARNING: script writer didn't release transaction Am I missing something basic here? Please reply. Thank you Kumar

8 18

[Serusers] need help!
by Mukesh Prajapati 22 Jun '07

22 Jun '07

hi, I m trying to add my-sql support to my SER. i install SER with .deb package. I uncommented the lines regarding my-sql.so module.... now when i try to start server it's giving error like "bad configuration file" can anybody halp me in this regard? thnx mukesh --------------------------------- We won't tell. Get more on shows you hate to love (and love to hate): Yahoo! TV's Guilty Pleasures list.

4 3

[Serusers] dns srv load balancing
by Mário Ferreira 22 Jun '07

22 Jun '07

Hi, Does anyone know if is possible for SER to perform load balancing according to DNS SRV priority and weight fields? It seems that SER ignores these fields. With use_dns_cache turned on, SER uses always one of the SRV entries, and only tries other if use_dns_failover is turned on and the first destination fails. With use_dns_cache turned off, SER uses all entries on a random way, depending of which entry appears first on the answer section. Is it necessary some configuration for SER to load balance according SRV records or this is not yet supported? regards, Mário Ferreira

2 1

[Serusers] Call between SER proxy servers of different domain
by Ranganath B 22 Jun '07

22 Jun '07

Hi, Was trying to make calls between 2 SIP soft phones which are registered with 2 different SER SIP proxy servers running on different machines but it fails always. When I make a call from Soft Phone-A registered with SER-A to Soft Phone-B registered with SER-B it fails. Soft Phone-A receives 407 response to its INVITE from SER-B and always fails to authenticate. Please provide me inputs on how to solve this problem. I have tried even adding Soft Phone-A's username and password in SER-B but none of them worked. I have another doubt about "aliases" in SER. Can I make some effective use of this and solve the problem mentioned above? Thanks in advance, Ranganath

2 1

[Serusers] Quick resend of INVITEs
by Stephen Helfen 22 Jun '07

22 Jun '07

Sometimes my ser proxy resends an INVITE 67 milliseconds after the original INVITE without receiving any response from the recipient. Essentially, what would normally be a 1 second timer for a resend is vastly shortened with no real explanation. If there is a Trixbox at the other end, the conversation results in a dropped call as the Trixbox continues to send repeated 200 Oks, but does not acknowledge the ACKs to those messages.The Asterix supposedly has a fix for this issue that is not included in the Trixbox.What I am trying to determine, though, is WHY the double invites are sent in the first place.Thanks,Steve _________________________________________________________________ Live Earth is coming. Learn more about the hottest summer event - only on MSN. http://liveearth.msn.com?source=msntaglineliveearthwlm

2 1

[Serusers] FreeBSD xml problem
by Todd Lewis 21 Jun '07

21 Jun '07

I was having a problem compiling SER in FreeBSD. Some of the libraries are not referenced correctly. Here are the notes from the install. Compiled against Sems 2.0-rc1 and FreeBSD 6.2 all applications installed from ports. command used to compile gmake group_include="standard standard-dep" all To get some modules to compile properly, I did the following. For XMLPRC ln -s /usr/local/lib/libxml2.a /usr/lib/libxml2.a ln -s /usr/local/lib/libxml2.la /usr/lib/libxml2.la ln -s /usr/local/lib/libxml2.so /usr/lib/libxml2.so ln -s /usr/local/include/libxml2 /usr/include/libxml2 For Modules Depending on XCAP (xcap presence pa rls) ln -s /usr/local/include/iconv.h /usr/include/iconv.h Still can't get EVAL module to compile tried the following. mkdir /usr/includes/uuid ln -s /usr/local/sys/uuid.h /usr/include/uuid/uuid.h Got Error gmake[1]: Entering directory `/usr/local/ser/src/ser-2.0.0-rc1/ modules/eval' gcc -shared -Wl,-O2 -Wl,-E eval.o -luuid -o eval.so /usr/bin/ld: cannot find -luuid gmake[1]: *** [eval.so] Error 1 gmake[1]: Leaving directory `/usr/local/ser/src/ser-2.0.0-rc1/modules/ eval'

2 2

[Serusers] Proxy for SDP Multipart Packets
by Edson 21 Jun '07

21 Jun '07

Hi... First I try MediaProxy, but it has problems with multipart SDP packets... It LOGs: error: mediaproxy/checkContentType(): invalid Content-Type for SDP message error: mediaproxy/getSDPMessage(): content type is not `application/sdp' error: use_media_proxy(): failed to get the SDP message Then I try RTPProxy... but it also didn't work. It gaves me: ERROR:check_content_type: invalid type for a message ERROR: extract_body: content type mismatching ERROR: force_rtp_proxy2: can't extract body from the message We are using a Cisco 2600 for IPIPGW (our PSTN GWs are on the H323 side). This messages appears for any call destinated to PSTN. Can anybody point me how to solve this problem? The solution based on MediaProxy had worked until last month... Edson.

1 0

[Users] How does Openser Presence Server works?
by li wang 21 Jun '07

21 Jun '07

Dear all, There is one question for OpenSer Presence module i don't understand. I see that the Presence server takes action base on the received SIP message SUBSCRIBE/PUBLISH, I want to know which stack SIP are u using in Openser? Because i look around the SIP Servlet API standard, it doesn't contain the method like doPublish(), doUpdate(). How do u do to realise the Presence module with Openser? Thanks, li _________________________________________________________________ Ten : Messenger en illimité sur votre mobile ! http://mobile.live.fr/messenger/ten/

2 2

[OpenSER-Users] RTPProxy or MediaProxy with Multipart SDP packets?
by Edson 21 Jun '07

21 Jun '07

Hi, guys... As the subject suggest, I'm facing a problem with Multipart SDP packets comming from a Cisco IPIPGW. I'm using MediaProxy, but reading an old e-mail on the list, it pointed that this was do a kind-of RFC race condition. RFC say that GW should respect multipart requirements according to Proxies request, but also say that Proxies should handle Multipart messages... Any way, my question is if RTPProxy lacks from the same 'problem' as MediaProxy? Can RTPProxy handle multipart SDP packets? Edson.

1 0

[OpenSER-Users] RE: [Users] ERROR: sip_msg_cloner: cannot allocate memory
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hi Bogdan, I followed Henning's advice and I increased the shared memory to 128MB (-m 128). I haven't seen this ERROR since then. However this is an error that I have only seen once. Maybe during those three minutes something very unusual happened. Regards, George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Thursday, June 21, 2007 4:51 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org; Henning Westerholt > Subject: Re: [Users] ERROR: sip_msg_cloner: cannot allocate memory > > HI George, > > any feedback on this? Henning was asking you to see if there > is a memory outage or leak...any result? > > regards, > bogdan > > Papadopoulos Georgios wrote: > > Hello all, > > > > I am running Openser 1.2 for several days and whithin a period of > > three minutes I got a lot of these messages: > > Jun 8 10:27:41 ser1 openser[23287]: ERROR: new_t: out of mem: > > Jun 8 10:27:41 ser1 openser[23287]: ERROR: t_newtran: new_t failed > > Jun 8 10:27:41 ser1 openser[23287]: ERROR: new_t: out of mem: > > Jun 8 10:27:41 ser1 openser[23287]: ERROR: t_newtran: new_t failed > > Jun 8 10:27:42 ser1 openser[23279]: ERROR: sip_msg_cloner: cannot > > allocate memory Jun 8 10:27:42 ser1 openser[23279]: ERROR: > new_t: out > > of mem: > > Jun 8 10:27:42 ser1 openser[23279]: ERROR: t_newtran: new_t failed > > Jun 8 10:27:42 ser1 openser[23279]: ERROR: sip_msg_cloner: cannot > > allocate memory Jun 8 10:27:42 ser1 openser[23279]: ERROR: > new_t: out > > of mem: > > Jun 8 10:27:42 ser1 openser[23279]: ERROR: t_newtran: new_t failed > > Jun 8 10:27:42 ser1 openser[23279]: ERROR:tm:relay_reply: cannot > > alloc reply shmem Jun 8 10:27:42 ser1 openser[23287]: > > ERROR:tm:relay_reply: cannot alloc reply shmem Jun 8 10:27:42 ser1 > > openser[23287]: ERROR:tm:_reply_light: cannot allocate shmem buffer > > Jun 8 10:27:42 ser1 openser[23279]: ERROR:tm:_reply_light: cannot > > allocate shmem buffer They only appeared in the log for a > few minutes > > and then they stopped. > > After this happened I got the following statistics and ps info. > > [root@ser1 sbin]# ./openserctl fifo get_statistics all > > core:rcv_requests = 34449564 core:rcv_replies = 14967742 > > core:fwd_requests = 78714 core:fwd_replies = 15461 > core:drop_requests > > = 49337 core:drop_replies = 0 core:err_requests = 0 > core:err_replies = > > 250 core:bad_URIs_rcvd = 457 core:unsupported_methods = 471 > > core:bad_msg_hdr = 389075 shmem:total_size = 33554432 > shmem:used_size > > = 4467768 shmem:real_used_size = 4731144 shmem:max_used_size = > > 33052304 shmem:free_size = 28823288 shmem:fragments = 9383 > > sl:1xx_replies = 0 sl:2xx_replies = 16962574 sl:3xx_replies = 2306 > > sl:4xx_replies = 4501596 sl:5xx_replies = 12366570 > sl:6xx_replies = 0 > > sl:sent_replies = 33833046 sl:sent_err_replies = 275 > sl:received_ACKs > > = 49337 tm:received_replies = 14952031 tm:relayed_replies = > 14702762 > > tm:local_replies = 69373 tm:UAS_transactions = 14671506 > > tm:UAC_transactions = 0 tm:2xx_transactions = 14551357 > > tm:3xx_transactions = 0 tm:4xx_transactions = 113514 > > tm:5xx_transactions = 9327 tm:6xx_transactions = 1 > > tm:inuse_transactions = 248 usrloc:registered_users = 2668 > > usrloc:location-users = 2668 usrloc:location-contacts = 2844 > > usrloc:location-expires = 53356 registrar:max_expires = 600 > > registrar:max_contacts = 10 registrar:default_expire = 600 > > registrar:accepted_regs = 14722245 registrar:rejected_regs = 43947 > > > > [root@ser1 sbin]# ./openserctl ps > > Process:: ID=0 PID=23265 Type=attendant > > Process:: ID=1 PID=23279 Type=receiver child=0 sock= > > xxx.xxx.xxx.xxx:5060 > > Process:: ID=2 PID=23284 Type=receiver child=1 sock= > > xxx.xxx.xxx.xxx:5060 > > Process:: ID=3 PID=23287 Type=receiver child=2 sock= > > xxx.xxx.xxx.xxx:5060 > > Process:: ID=4 PID=23290 Type=receiver child=0 sock= > > yyy.yyy.yyy.yyy:5060 > > Process:: ID=5 PID=23292 Type=receiver child=1 sock= > > yyy.yyy.yyy.yyy:5060 > > Process:: ID=6 PID=23293 Type=receiver child=2 sock= > > yyy.yyy.yyy.yyy:5060 > > Process:: ID=7 PID=23297 Type=receiver child=0 sock= > > zzz.zzz.zzz.zzz:5060 > > Process:: ID=8 PID=23300 Type=receiver child=1 sock= > > zzz.zzz.zzz.zzz:5060 > > Process:: ID=9 PID=23303 Type=receiver child=2 sock= > > zzz.zzz.zzz.zzz:5060 > > Process:: ID=10 PID=23306 Type=receiver child=0 sock= > > qqq.qqq.qqq.qqq:5060 > > Process:: ID=11 PID=23309 Type=receiver child=1 sock= > > qqq.qqq.qqq.qqq:5060 > > Process:: ID=12 PID=23310 Type=receiver child=2 sock= > > qqq.qqq.qqq.qqq:5060 > > Process:: ID=13 PID=23311 Type=receiver child=0 sock= > > vvv.vvv.vvv.vvv:5060 > > Process:: ID=14 PID=23318 Type=receiver child=1 sock= > > vvv.vvv.vvv.vvv:5060 > > Process:: ID=15 PID=23321 Type=receiver child=2 sock= > > vvv.vvv.vvv.vvv:5060 > > Process:: ID=16 PID=23324 Type=timer > > Does anyone know what might be causing these errors? > > > > Thank you > > > > George > > > > > > > > > > Disclaimer > > > > The information in this e-mail and any attachments is > confidential. It > > is intended solely for the attention and use of the named > > addressee(s). If you are not the intended recipient, or person > > responsible for delivering this information to the intended > recipient, > > please notify the sender immediately. Unless you are the intended > > recipient or his/her representative you are not authorized to, and > > must not, read, copy, distribute, use or retain this message or any > > part of it. E-mail transmission cannot be guaranteed to be > secure or > > error-free as information could be intercepted, corrupted, lost, > > destroyed, arrive late or incomplete, or contain viruses. > > > > > ---------------------------------------------------------------------- > > -- > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > >

2 1

[Users] ERROR: sip_msg_cloner: cannot allocate memory
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hello all, I am running Openser 1.2 for several days and whithin a period of three minutes I got a lot of these messages: Jun 8 10:27:41 ser1 openser[23287]: ERROR: new_t: out of mem: Jun 8 10:27:41 ser1 openser[23287]: ERROR: t_newtran: new_t failed Jun 8 10:27:41 ser1 openser[23287]: ERROR: new_t: out of mem: Jun 8 10:27:41 ser1 openser[23287]: ERROR: t_newtran: new_t failed Jun 8 10:27:42 ser1 openser[23279]: ERROR: sip_msg_cloner: cannot allocate memory Jun 8 10:27:42 ser1 openser[23279]: ERROR: new_t: out of mem: Jun 8 10:27:42 ser1 openser[23279]: ERROR: t_newtran: new_t failed Jun 8 10:27:42 ser1 openser[23279]: ERROR: sip_msg_cloner: cannot allocate memory Jun 8 10:27:42 ser1 openser[23279]: ERROR: new_t: out of mem: Jun 8 10:27:42 ser1 openser[23279]: ERROR: t_newtran: new_t failed Jun 8 10:27:42 ser1 openser[23279]: ERROR:tm:relay_reply: cannot alloc reply shmem Jun 8 10:27:42 ser1 openser[23287]: ERROR:tm:relay_reply: cannot alloc reply shmem Jun 8 10:27:42 ser1 openser[23287]: ERROR:tm:_reply_light: cannot allocate shmem buffer Jun 8 10:27:42 ser1 openser[23279]: ERROR:tm:_reply_light: cannot allocate shmem buffer They only appeared in the log for a few minutes and then they stopped. After this happened I got the following statistics and ps info. [root@ser1 sbin]# ./openserctl fifo get_statistics all core:rcv_requests = 34449564 core:rcv_replies = 14967742 core:fwd_requests = 78714 core:fwd_replies = 15461 core:drop_requests = 49337 core:drop_replies = 0 core:err_requests = 0 core:err_replies = 250 core:bad_URIs_rcvd = 457 core:unsupported_methods = 471 core:bad_msg_hdr = 389075 shmem:total_size = 33554432 shmem:used_size = 4467768 shmem:real_used_size = 4731144 shmem:max_used_size = 33052304 shmem:free_size = 28823288 shmem:fragments = 9383 sl:1xx_replies = 0 sl:2xx_replies = 16962574 sl:3xx_replies = 2306 sl:4xx_replies = 4501596 sl:5xx_replies = 12366570 sl:6xx_replies = 0 sl:sent_replies = 33833046 sl:sent_err_replies = 275 sl:received_ACKs = 49337 tm:received_replies = 14952031 tm:relayed_replies = 14702762 tm:local_replies = 69373 tm:UAS_transactions = 14671506 tm:UAC_transactions = 0 tm:2xx_transactions = 14551357 tm:3xx_transactions = 0 tm:4xx_transactions = 113514 tm:5xx_transactions = 9327 tm:6xx_transactions = 1 tm:inuse_transactions = 248 usrloc:registered_users = 2668 usrloc:location-users = 2668 usrloc:location-contacts = 2844 usrloc:location-expires = 53356 registrar:max_expires = 600 registrar:max_contacts = 10 registrar:default_expire = 600 registrar:accepted_regs = 14722245 registrar:rejected_regs = 43947 [root@ser1 sbin]# ./openserctl ps Process:: ID=0 PID=23265 Type=attendant Process:: ID=1 PID=23279 Type=receiver child=0 sock= xxx.xxx.xxx.xxx:5060 Process:: ID=2 PID=23284 Type=receiver child=1 sock= xxx.xxx.xxx.xxx:5060 Process:: ID=3 PID=23287 Type=receiver child=2 sock= xxx.xxx.xxx.xxx:5060 Process:: ID=4 PID=23290 Type=receiver child=0 sock= yyy.yyy.yyy.yyy:5060 Process:: ID=5 PID=23292 Type=receiver child=1 sock= yyy.yyy.yyy.yyy:5060 Process:: ID=6 PID=23293 Type=receiver child=2 sock= yyy.yyy.yyy.yyy:5060 Process:: ID=7 PID=23297 Type=receiver child=0 sock= zzz.zzz.zzz.zzz:5060 Process:: ID=8 PID=23300 Type=receiver child=1 sock= zzz.zzz.zzz.zzz:5060 Process:: ID=9 PID=23303 Type=receiver child=2 sock= zzz.zzz.zzz.zzz:5060 Process:: ID=10 PID=23306 Type=receiver child=0 sock= qqq.qqq.qqq.qqq:5060 Process:: ID=11 PID=23309 Type=receiver child=1 sock= qqq.qqq.qqq.qqq:5060 Process:: ID=12 PID=23310 Type=receiver child=2 sock= qqq.qqq.qqq.qqq:5060 Process:: ID=13 PID=23311 Type=receiver child=0 sock= vvv.vvv.vvv.vvv:5060 Process:: ID=14 PID=23318 Type=receiver child=1 sock= vvv.vvv.vvv.vvv:5060 Process:: ID=15 PID=23321 Type=receiver child=2 sock= vvv.vvv.vvv.vvv:5060 Process:: ID=16 PID=23324 Type=timer Does anyone know what might be causing these errors? Thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

4 8

[OpenSER-Users] RE: [Users] out of memory - please help
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hi Bogdan, Yes I know, that's where I got stuck too... Anyway, probably I can get rid of avp_subst(), but not immediately. I will let you know as soon as possible. subst_user() is heavily used in the script, so it has to stay... Is subst() also a suspect or not? thanks George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Thursday, June 21, 2007 3:41 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] out of memory - please help > > George, > > I was trying to reduce the investigation options focusing > only on the functions you are using....but useless :) you are > using all of them :).... > > is there any way to remove couple of them and test again? > > regards, > bogdan > > Papadopoulos Georgios wrote: > > Hi Bogdan, > > > > I am using all of the functions that you mentioned. I am also using > > subst(). Please, let me know if you need more info. > > > > best regards > > > > George > > > > > > > >> -----Original Message----- > >> From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >> Sent: Thursday, June 21, 2007 1:46 PM > >> To: Papadopoulos Georgios > >> Cc: users(a)openser.org > >> Subject: Re: [Users] out of memory - please help > >> > >> Hi George, > >> > >> looking over the log, it might be something wrong with > >> subst_str() function - I see a lot of memory allocated by this > >> function (3267 mem chunks). > >> > >> now, I have to trace the function using the subst_str() function > >> :)..So, are you using from script one of the following functions: > >> subst_uri() > >> subst_user() > >> avp_subst() > >> > >> regards, > >> bogdan > >> > >> Papadopoulos Georgios wrote: > >> > >>> Hello all, > >>> > >>> We have an ongoing issue with Openser running out of > memory after a > >>> few hours. It is very consistent which makes me believe it > >>> > >> is a memory > >> > >>> leak. Can someone look at the log file? I have done a mem dump on > >>> process 8573 which is the one that ran out of memory. Here > >>> > >> is the log: > >> > >>> _http://www.real.gr/files/openser.20070620.log.gz_ > >>> It always happens on the first receiver child. Our current > >>> > >> solution is > >> > >>> to restart Openser every few hours. I would like to solve > >>> > >> this at its > >> > >>> root, so please let me know if you need more info. > >>> My Openser is 1.2.x from svn, revision 2333. > >>> > >>> thank you for any help > >>> > >>> George > >>> > >>> > >>> > >>> > >>> Disclaimer > >>> > >>> The information in this e-mail and any attachments is > >>> > >> confidential. It > >> > >>> is intended solely for the attention and use of the named > >>> addressee(s). If you are not the intended recipient, or person > >>> responsible for delivering this information to the intended > >>> > >> recipient, > >> > >>> please notify the sender immediately. Unless you are the intended > >>> recipient or his/her representative you are not > authorized to, and > >>> must not, read, copy, distribute, use or retain this > message or any > >>> part of it. E-mail transmission cannot be guaranteed to be > >>> > >> secure or > >> > >>> error-free as information could be intercepted, corrupted, lost, > >>> destroyed, arrive late or incomplete, or contain viruses. > >>> > >>> > >>> > >> > --------------------------------------------------------------------- > >> - > >> > >>> -- > >>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)openser.org > >>> http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >> > > > > > >

1 0

[OpenSER-Users] RE: [Users] out of memory - please help
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hi Bogdan, I am using all of the functions that you mentioned. I am also using subst(). Please, let me know if you need more info. best regards George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Thursday, June 21, 2007 1:46 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] out of memory - please help > > Hi George, > > looking over the log, it might be something wrong with > subst_str() function - I see a lot of memory allocated by > this function (3267 mem chunks). > > now, I have to trace the function using the subst_str() > function :)..So, are you using from script one of the > following functions: > subst_uri() > subst_user() > avp_subst() > > regards, > bogdan > > Papadopoulos Georgios wrote: > > Hello all, > > > > We have an ongoing issue with Openser running out of memory after a > > few hours. It is very consistent which makes me believe it > is a memory > > leak. Can someone look at the log file? I have done a mem dump on > > process 8573 which is the one that ran out of memory. Here > is the log: > > _http://www.real.gr/files/openser.20070620.log.gz_ > > It always happens on the first receiver child. Our current > solution is > > to restart Openser every few hours. I would like to solve > this at its > > root, so please let me know if you need more info. > > My Openser is 1.2.x from svn, revision 2333. > > > > thank you for any help > > > > George > > > > > > > > > > Disclaimer > > > > The information in this e-mail and any attachments is > confidential. It > > is intended solely for the attention and use of the named > > addressee(s). If you are not the intended recipient, or person > > responsible for delivering this information to the intended > recipient, > > please notify the sender immediately. Unless you are the intended > > recipient or his/her representative you are not authorized to, and > > must not, read, copy, distribute, use or retain this message or any > > part of it. E-mail transmission cannot be guaranteed to be > secure or > > error-free as information could be intercepted, corrupted, lost, > > destroyed, arrive late or incomplete, or contain viruses. > > > > > ---------------------------------------------------------------------- > > -- > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > >

2 2

[OpenSER-Users] Setting some Radius Attributes in OpenSER's cfg/logic?
by liran tal 21 Jun '07

21 Jun '07

Hey Everyone, Firstly, thanks for Dan and everyone else who had replied on my problem with getting freeradius working with openser. Much appreciate that. Now after I have my openser+freeradius+mysql working fine I'd like to tinker a bit with openser's abilities. The dictionary.ser or dictionary.sip specifies several attributes for example the Digest-User-Name which the dictionary specifies as: ATTRIBUTE Digest-User-Name 1072 string Which is the digest username that the sip client set when it's prompt for a proxy/www authorization and I'd like to set that attribute it in the radius start/stop record when it's written to the database. I have gone over some info at http://www.openser.org/docs/modules/1.1.x/acc.html and http://www.openser.org/docs/modules/1.1.x/avpops.html but I'm still quite unsure how to put this thing into place. If someone could provide an example, that would be great. Thanks, Sincerely, Liran Tal.

1 0

[Users] Re: FreeRADIUS and OpenSER 1.1.1
by Dan-Cristian Bogos 21 Jun '07

21 Jun '07

Hi Liran, the problem u are facing it is a well known issue of FreeRADIUS. SQL module is missing the Accounting-Type=15, so nothing related to OpenSER, therefore nothing to be fixed here. A sollution would be using the patch provided with the distribution of CDRTool, or directly get it from their site: http://www.ag-projects.com/index.php?option=com_weblinks&catid=66&Itemid=126 (link name "Freeradius patch for OpenSER accounting"). Hope it helps, DanB

2 1

[OpenSER-Users] RE: [Users] unixodbc: use_escape_common
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hello Henning I just needed something quick and dirty so I just added the following function and used it instead of escape_common. This works fine with Oracle. int sql_escape(char *dst, char *src, int src_len) { int i, j; if(dst==0 || src==0 || src_len<=0) return 0; j = 0; for(i=0; i<src_len; i++) { switch(src[i]) { case '\'': dst[j++] = '\''; dst[j++] = src[i]; break; default: dst[j++] = src[i]; } } return j; } It would be nice to add this as a configuration parameter in the future. thanks George > -----Original Message----- > From: Henning Westerholt [mailto:henning.westerholt@1und1.de] > Sent: Thursday, June 21, 2007 12:00 PM > To: users(a)openser.org > Cc: Papadopoulos Georgios > Subject: Re: [Users] unixodbc: use_escape_common > > On Donnerstag, 7. Juni 2007, Papadopoulos Georgios wrote: > > Hello all, > > > > I am using > > modparam("unixodbc", "use_escape_common", 1) and the result > is that if > > I have a string like he'llo (single quote between the e and l), it > > becomes he\'llo which is not working in sql. > > The result should be he''llo (two single quotes between e > and l). The > > reason is that unixodbc uses the core function escape_common(). I > > think that unixodbc whould have two parameters like > > modparam("unixodbc", "use_escape_character", "'") > modparam("unixodbc", > > "escaped_characters", "'\%^") use_escape_character would be null by > > default and if it is not null it would be the character to use for > > escaping. > > escaped_characters would be a list of characters that should be > > escaped by the character defined above. > > > > I have patched unixodbc to use its own escape function > instead, but it > > would be nice if this was a configurable option that others > could use. > > I could try to implement this if there is an interest. > Please let me > > know your thoughts. > > Hello George, > > sorry for the late reply. Yes, improvements of the unixodbc > escape functions would be nice. Do you add another function > for escaping to unixodbc, or do you use some provided > functions from the odbc driver? > > In the past we had the problem that different odbc drivers > need different escape signs. So the mechanism you suggested > above (have options for the > escaping) would provide a solution for this problem. > > Cheers, > > Henning > Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Users] out of memory - please help
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hello all, We have an ongoing issue with Openser running out of memory after a few hours. It is very consistent which makes me believe it is a memory leak. Can someone look at the log file? I have done a mem dump on process 8573 which is the one that ran out of memory. Here is the log: http://www.real.gr/files/openser.20070620.log.gz <http://www.real.gr/files/openser.20070620.log.gz> It always happens on the first receiver child. Our current solution is to restart Openser every few hours. I would like to solve this at its root, so please let me know if you need more info. My Openser is 1.2.x from svn, revision 2333. thank you for any help George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[OpenSER-Users] Cluecon 2007
by Daniel-Constantin Mierla 21 Jun '07

21 Jun '07

Hello, Cluecon 2007 is taking place next week in Chicago (June 26-28). If any of you is attending and want to meet, please send an email. http://www.cluecon.com There will be 1 hour OpenSER session, in the first day, afternoon. Cheers, Daniel

1 0

[Users] regarding memory usage
by Arun Kumar 21 Jun '07

21 Jun '07

Hi 1. Is there any benefit of increasing the value of PKG_MEM_POOL_SIZE and SHM_MEM_SIZE ? /*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 1024*1024 /*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 32 2. I've compiled my ser with #define PKG_MEM_POOL_SIZE 1024*1024*512 ans started using ser -m 100 option with children=4 and listening on two ips when I started memory usages was seems to fine for few days(3-4) less then 1GB but after that nealy 1.7 - 1.8 GB of memory usage and when I do top: 16165 root 15 0 617m 54m 36m S 0.3 2.7 0:16.34 ser 16167 root 15 0 617m 54m 36m S 0.3 2.7 0:15.89 ser 16164 root 15 0 617m 54m 36m S 0.3 2.7 0:16.29 ser 16166 root 15 0 617m 54m 36m S 0.7 2.7 0:16.16 ser 16172 root 16 0 617m 53m 35m S 0.0 2.7 0:05.04 ser 16168 root 16 0 617m 52m 34m S 0.0 2.6 0:00.09 ser 16170 root 16 0 617m 52m 34m S 0.0 2.6 0:00.07 ser 16169 root 16 0 617m 52m 34m S 0.0 2.6 0:00.08 ser 16171 root 16 0 617m 52m 34m S 0.0 2.6 0:00.10 ser 16163 root 16 0 617m 52m 34m S 0.0 2.6 0:00.01 ser 16145 root 25 0 617m 52m 34m S 0.0 2.6 0:07.80 ser it shows 11 instance of ser with above info. If I sum up 617 * 11 = 6787 MB of memory but in my machine I've only 2 GB Physical RAM and it never uses Swap ? if 54 * 11 = 594 ? but free -m and top shows more memory usage ? can please explain me in brief . I'll be really thankfull. B'coz of this I'm facing may problem. thanks arun

4 10

[OpenSER-Users] JMF
by amit 21 Jun '07

21 Jun '07

Any Buddy Using JMF So Please tell me How can i Capture RTP packets in JMF

1 0

[Serusers] Please help its urgent
by Arun Kumar 21 Jun '07

21 Jun '07

Hi All, please can some one tell me is there any memory leak with ser-0.9.6. It runs fine for few days and then starts some memory related problems in that case I've to restart my ser. I've 2GB of physical RAM in my machine with Quad Core cpu. but now I've only 70MB free out of 2 GB in max 1 day It will start to give me again error. I've compiled my ser with 512MB Private Memory and running with 100MB shared memory. please help soon. thanks arun

3 10

[Users] unixodbc: use_escape_common
by Papadopoulos Georgios 21 Jun '07

21 Jun '07

Hello all, I am using modparam("unixodbc", "use_escape_common", 1) and the result is that if I have a string like he'llo (single quote between the e and l), it becomes he\'llo which is not working in sql. The result should be he''llo (two single quotes between e and l). The reason is that unixodbc uses the core function escape_common(). I think that unixodbc whould have two parameters like modparam("unixodbc", "use_escape_character", "'") modparam("unixodbc", "escaped_characters", "'\%^") use_escape_character would be null by default and if it is not null it would be the character to use for escaping. escaped_characters would be a list of characters that should be escaped by the character defined above. I have patched unixodbc to use its own escape function instead, but it would be nice if this was a configurable option that others could use. I could try to implement this if there is an interest. Please let me know your thoughts. thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Serusers] ACKs losts
by Масальцев Денис 21 Jun '07

21 Jun '07

Hi, Sometimes I got calls terminated in 34 seconds. Acc sql dump for normal call: | 573379090 | 2007-06-13 14:01:37 | INVITE | | 573379090 | 2007-06-13 14:01:37 | ACK | | 573379090 | 2007-06-13 14:02:04 | BYE | And calls, terminated abnormal: | 573379090 | 2007-06-20 20:37:56 | INVITE | | 573379090 | 2007-06-20 20:38:56 | INVITE | | 573379090 | 2007-06-20 20:39:59 | INVITE | | 573379090 | 2007-06-20 20:40:59 | INVITE | | 573379090 | 2007-06-20 20:42:46 | INVITE | --------- | 7631081 | 2007-06-20 20:38:31 | BYE | | 7631081 | 2007-06-20 20:39:30 | BYE | | 7631081 | 2007-06-20 20:40:33 | BYE | | 7631081 | 2007-06-20 20:41:33 | BYE | | 7631081 | 2007-06-20 20:43:20 | BYE | So, SER lost ACKs. Problem appear and disapper randomly. Config is based on nat-rtpproxy.cfg and gw-pstn.cfg Any idea?

2 1

[Serusers] Rewrite de f-uri
by Riccardo Cupardo 21 Jun '07

21 Jun '07

Hi m8s, there is a method to change the From uri ? Best regards -- Riccardo Cupardo

2 2

[Users] Changing the prefix in subject for mailing lists
by Bogdan-Andrei Iancu 21 Jun '07

21 Jun '07

Hi, there were couple of requests to change the prefix used by the mailing list to something more descriptive. Like: [Devel] -> [OpenSER-Devel] [Users] -> [OpenSER-Users] I guess it is quite standard to have the project name included in the prefix, but I want to see if anybody is aware of an side effect ;) regards, bogdan

1 1

[Users] too many branches for latest X-lite 3
by Jan ONDREJ (SAL) 21 Jun '07

21 Jun '07

Hello, I have problems with too many branches for latest X-Lite release 1011s stamp 41150. Other phones are working properly. X-Lites are trying to subscribe each 40 seconds with different rinstance strings. Example: mysql> select contact,last_modified from location where username='1538' order by last_modified; +-----------------------------------------------------------+---------------------+ | contact | last_modified | +-----------------------------------------------------------+---------------------+ | sip:1538@158.197.240.237:51092;rinstance=897b6ff9462755eb | 2007-06-13 14:17:41 | | sip:1538@158.197.240.237:51092;rinstance=059223be49bdc5a4 | 2007-06-13 14:18:21 | | sip:1538@158.197.240.237:51092;rinstance=e3b22d920bdd9b61 | 2007-06-13 14:19:00 | | sip:1538@158.197.240.237:51092;rinstance=163058af66fd3b21 | 2007-06-13 14:19:39 | | sip:1538@158.197.10.104:5060 | 2007-06-13 15:10:01 | +-----------------------------------------------------------+------------------- After some time there is 30-90 subscriptions for some users (not for all users of X-lite, but only for lastest Xlite). After some time openser is sending many SUBSCRIBE requests to these users and eats all of CPU, my calls are very slow. I am now trying to play with "max_contacts" registrar parameter set to 5. Is it a problem of X-lite and how to prevent these DOS attacks from wrong softphones? Thank you. SAL

4 5

[Users] OpenSER dimensioning. How many calls/sec can it set up?
by ram 21 Jun '07

21 Jun '07

Hi I have seen your post in news group iam trying to setup same kind of setup kindly advice, what kind of server full config with RAID levels used by the people in real production. they are using one server for all, like NAT, RTP, MYSQL DATA, or diferent servers On P4 3.0 GHz, we use RTPProxy, and on 80 concurent calls CPU is 5%. In start we have used Media proxy, but we have problems, and we switch to RTPProxy. your advice will be helpfull my deployement ram

1 0

Re: [Users] ERROR: sip_msg_cloner: cannot allocate memory
by Arun Kumar 21 Jun '07

21 Jun '07

the output I sent is from ser. I switched to ser because of same error so I thought this time I'll get some reply from some one. thanks On 6/21/07, Henning Westerholt <henning.westerholt(a)1und1.de> wrote: > > On Donnerstag, 21. Juni 2007, Arun Kumar wrote: > > here is my top output: > > > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > > 16167 root 15 0 617m 54m 36m S 0.0 2.7 8:26.84 ser > > Are you using OpenSER or SER? > > Cheers, > > Henning >

2 1

[Users] editing header multiple times
by zm23 20 Jun '07

20 Jun '07

Hi all, I am having some issues with editing remote party header. I understand that changes are saved as a diff and are sent when packet goes on wire. In my current config rpid is edited when invite is received and it seems to work fine. There is one scenario where I need to edit rpid or remove rpid altogether before relaying it. "remove_hf" did not remove the header after it was edited earlier. Is there a way to do this? Thanks in advance for your help. -- Zahid

3 2

[Users] Route change on Fly
by ram 20 Jun '07

20 Jun '07

Hi iam peering wit different providers now i have one provider working fine now i have added 2more providers, and documentation says to use LCR to route the calls. i have client who authenticate with IP address send calls how can i change customer route from one provider to other provider on realtime ? is required to rerun openser, any idea how can i create prefix to the customer with ip (trusted)authentication ram

1 0

Re: [Users] regarding memory usage
by Arun Kumar 20 Jun '07

20 Jun '07

can you please explain my first ques: 1. Is there any benefit of increasing the value of PKG_MEM_POOL_SIZE and SHM_MEM_SIZE ? /*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 1024*1024 /*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 32 thanks arun On 6/20/07, Morgan Gilroy <morgan(a)telappliant.com> wrote: > > If you use `free –m` it shows the amount of memory in mega bytes, should > be easier to read. > > > > Mem: > > Total: total memory in your system > > Used: Memory used by all processes and disk cache etc.. > > Free: memory that is not being used at all > > (ignore the others as they are no longer used) > > > > -/+ buffers = same as above except not counting disk cache and other > temporary memory usage. This is what is really being used. > > > > Swap: this is the swap space on the disk. > > > > When an application requests memory it first gets memory from the free > memory, if there is not enough then it takes memory from the disk cache and > other buffers. The cache is there just to speed up access but it can use a > lot of ram. > > > > Look at `man free` or google if you want a further explanation. > > > ------------------------------ > > *From:* Arun Kumar [mailto:arunvoip@gmail.com] > *Sent:* 20 June 2007 16:09 > *To:* Morgan Gilroy > *Cc:* USER; serusers(a)lists.iptel.org > *Subject:* Re: [Users] regarding memory usage > > > > # free > total used free shared buffers cached > Mem: 2074376 1740724 333652 0 72328 1280192 > -/+ buffers/cache: 388204 1686172 > Swap: 2031608 0 2031608 > > can you please explain in brief all the info. > > thanks > arun > > On 6/20/07, *Morgan Gilroy* <morgan(a)telappliant.com > wrote: > > The numbers shown for memory usage also include shared memory, ie memory > used by multiple processes/threads, these shared areas will be counted > multiple times. > > > > Use `free` to find the real amount of used memory on your server (look at > the +/- buffers section) > > > ------------------------------ > > *From:* users-bounces(a)openser.org [mailto:users-bounces@openser.org] *On > Behalf Of *Arun Kumar > *Sent:* 20 June 2007 14:44 > *To:* USER; serusers(a)lists.iptel.org > *Subject:* [Users] regarding memory usage > > > > Hi > > 1. Is there any benefit of increasing the value of PKG_MEM_POOL_SIZE and > SHM_MEM_SIZE ? > > /*used only if PKG_MALLOC is defined*/ > #define PKG_MEM_POOL_SIZE 1024*1024 > > /*used if SH_MEM is defined*/ > #define SHM_MEM_SIZE 32 > > > 2. I've compiled my ser with > > #define PKG_MEM_POOL_SIZE 1024*1024*512 > > ans started using ser -m 100 option with children=4 and listening on two > ips > > when I started memory usages was seems to fine for few days(3-4) less then > 1GB but after that nealy 1.7 - 1.8 GB of memory usage and when I do top: > > 16165 root 15 0 617m 54m 36m S 0.3 2.7 0:16.34 ser > 16167 root 15 0 617m 54m 36m S 0.3 2.7 0:15.89 ser > 16164 root 15 0 617m 54m 36m S 0.3 2.7 0:16.29 ser > 16166 root 15 0 617m 54m 36m S 0.7 2.7 0:16.16 ser > 16172 root 16 0 617m 53m 35m S 0.0 2.7 0:05.04 ser > 16168 root 16 0 617m 52m 34m S 0.0 2.6 0:00.09 ser > 16170 root 16 0 617m 52m 34m S 0.0 2.6 0:00.07 ser > 16169 root 16 0 617m 52m 34m S 0.0 2.6 0:00.08 ser > 16171 root 16 0 617m 52m 34m S 0.0 2.6 0:00.10 ser > 16163 root 16 0 617m 52m 34m S 0.0 2.6 0:00.01 ser > 16145 root 25 0 617m 52m 34m S 0.0 2.6 0:07.80 ser > > it shows 11 instance of ser with above info. If I sum up > 617 * 11 = 6787 MB of memory but in my machine I've only 2 GB Physical RAM > and it never uses Swap ? > if 54 * 11 = 594 ? but free -m and top shows more memory usage ? > > can please explain me in brief . I'll be really thankfull. B'coz of this > I'm facing may problem. > > thanks > > arun > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ >

2 1

[Users] OpenSER 1.2.1 resend of messages not matched in tm?
by Tobias Lindgren 20 Jun '07

20 Jun '07

Hi all, I'm running openser 1.2.1 w/ tm module. In some calls, specially FAX-calls, my gateways tries T.38 first and then performs fallback to G711. This scenario makes my OpenSER resend some messages even though it has got an ACK. What happends is that the terminating PBX doesn't support T.38 and sends a "488 Not Acceptable Media" respons to my OpenSER which is relayed back to my gateway. The relay of messages looks like this: - INVITE with T.38 from GW to PBX 1. PBX sends 488 to OpenSER 2. OpenSER ACKs to PBX 3. OpenSER sends 488 to GW 4. GW ACKs to OpenSER 5. OpenSER sends 488 to GW 6. GW ACKs to OpenSER - INVITE with G711 from GW to PBX 1. PBX OK back to GW Now after the new INVITE with G711 OpenSER starts to send the 488-messages to my Gateway again, and I'm assuming it does so because it think they are not ACKed? Any idea to what goes wrong here? Br, /Tobias

3 2

Re: [Users] presence
by KUMAR 20 Jun '07

20 Jun '07

Hi Naidu, If you've compiled openser from source, then u'll find a script called mysqldb.sh inside the scripts directory of the source distribution. Just cd to the directory containing the script. And then execute it as # ./mysqldb.sh create That should be it, it will ask you if u want to create the presence related tables. Thanks kumar On 6/20/07, akkala.naidu(a)aricent.com <akkala.naidu(a)aricent.com> wrote: > > Hi Kumar, > > Even myself trying to use openser as 'presence server'. > I did all the changes to openser.cfg to add presence module to openser. > i have downloaded and installed mysql binary " > mysql-5.0.41-linux-i686-glibc23.tar.gz " from net. > now my question is: How to create PRESENCE tables from mysql ? > when i type 'use openser' command from mysql> i got below error : > > mysql> use openser > ERROR 1049 (42000): Unknown database 'openser' > > > Pls let me know how to create tables and how to start mysql client an > server to make it work as presence server. > > Thanks in advance, > Naidu > > -----users-bounces(a)openser.org wrote: ----- > > To: users(a)openser.org > From: KUMAR <kumar.kisalaya(a)gmail.com> > Sent by: users-bounces(a)openser.org > Date: 06/20/2007 12:44PM > Subject: [Users] presence > > > > ScanMail detected the email with attachment openser.cfg20070620094425.raris not allowed to circulate. The attachment Quarantineed > ScanMail detected the email with attachment openser_dump20070620125611.rar > is not allowed to circulate. The attachment Quarantineed > > Hi all, > I am using openser-1.2.1+RTPProxy. I am using XLite as UA. I want to > be able to store the buddy list of the users at the server. For this, > I am using the presence module. But I cannot get it working. I have > created the presence related tables in mysql. And those tables do show > some information in them. I have attached my openser.cfg and the > message dump from wireshark. The messages have been captured at the UA > end. > I also get the following message at the server. > > PRESENCE: handle_subscribe:Missing or unsupported event header field value > 2(12452) PRESENCE:handle_subscribe: ERROR occured > 2(12452) WARNING: script writer didn't release transaction > > Am I missing something basic here? > Please reply. > Thank you > Kumar > > > ScanMail detected the email with attachment openser.cfg20070620094425.raris not allowed to circulate. The attachment Quarantineed > ScanMail detected the email with attachment openser_dump20070620125611.rar > is not allowed to circulate. The attachment Quarantineed > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > > *****Aricent-Private *****= > > "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of > the individual to whom it is addressed. It may contain privileged or confidential information and should not be > circulated or used for any purpose other than for what it is intended. If you have received this message in error, > please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly > prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for > loss or damage arising from the use of the information transmitted by this email including damage from virus." > >

1 0

Re: [Users] Help on probably memory leak
by Marcello Lupo 20 Jun '07

20 Jun '07

Hi to all, i made some other investigation on my logs. I found that from one day before the problem of out of memory has been raised in my logs i found this wrong registrations started to come to the proxy every 15 seconds from one client. REGISTER sip:voip.domain.com:5060 SIP/2.0 Via: SIP/2.0/UDP 123.123.123.123:1375;branch=z9hG4bK00E0F55649500000BF2F00001098 From: <sip:voip.domain.com>;tag=00E0F55649500000BF2F00001AB7 To: <sip:voip.domain.com> Call-ID: 00E0F55649500000AE6C00000408(a)123.123.123.123 CSeq: 59185 REGISTER Contact: <sip:123.123.123.123:5060> Expires: 3600 Max-Forwards: 70 Content-Length: 0 In my configuration as route that handle REGISTER requests i made an avp_db_load to check if the username registering is a valid user and make some avp_check on the preferences that are loaded. Is it possible that having the empty username in From/To is causing some memory leak? Remember i'm using version 1.2.0 . Thanks, Bye, Marcello

3 12

[Users] openser: branches
by Helmut Kuper 20 Jun '07

20 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm playing around with parallel calls. Is there a way to find out how much pending forks belonging to 1 origin call/transaction are hold in openser? Or, alternatively, is there a way to detect in openser the last pending branch of a parallel fork, which is eihter going to be the winning branch or, of course, the failed branch, which generates then the final negative reply to party A. regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGdoo24tZeNddg3dwRAulWAKCJNEJseSci0f5DDwmGuOnnxZ+HJACdGLIo 1Hx04Pg603nqd0Uwks2CK9I= =wt8R -----END PGP SIGNATURE-----

2 1

[Users] confirmation column
by Christoph Fürstaller 20 Jun '07

20 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Anyone knows what the 'confirmation' column in the openser sql database (pgsql) is? What is it used for and how is it computed? thanks, Christoph - -- Dipl.-Ing. Kurt Krenn - IT-Beratung Franz-Josef-Strasse 33/4/43, 5020 Salzburg Tel: +43 662 879512 Fax: +43 662 875960 IP-Tel: +43 780 kkrenn (557366) Email: c.fuerstaller(a)kurtkrenn.com sip: c.fuerstaller(a)kurtkrenn.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (GNU/Linux) iD8DBQFGd+quR0exH8dhr/YRArxJAJ4j9yDVvaqu+B75O1JNBpy96WgO7wCfVaLW bLhwqsJUyzlCKFTQ5odhUNQ= =bAuy -----END PGP SIGNATURE-----

2 1

[Users] SEMS: B2B-Problem
by Helmut Kuper 20 Jun '07

20 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I derived a SEMS module from ann_B2B for ringtones I got a segmentation fault after a few calls. It works like this: Call comes in and a ringtone (e.g. sound files) is played. In parallel I call callee with connectCallee(). When Callee replies positive ringtone stops. When caller sends a Bye befor Callee replies I close the ringtone file, call setStopped() and dlg.bye(). My test is like this: I place a call and get the ringtone. SEMS tries to connect to callee in parallel. Then I hang up (sending a Bye). SEMS stops ringtone and session with caller. I do the test number of times until a segmentation fault occurs. SEMS logfile is like this, when test seems to be ok: (7396) DEBUG: write_to_socket (AmUtils.cpp:616): write to unix socket: completed (7396) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <200 Succeeded> (7396) DEBUG: onBye (AnnounceB2B.cpp:139): @@@@ AnnounceCallerDialog::onBye() (7396) DEBUG: onBye (AnnounceB2B.cpp:149): @@@@ onBye: Callee is not connected. (7396) DEBUG: onBye (AnnounceB2B.cpp:150): @@@@ onBye: Stopping Ringtone ... (7396) DEBUG: close (AmRingToneGenerator.cpp:43): AmRingTone::close : Beende Ringtone (7396) DEBUG: bye (AmSipDialog.cpp:385): bye(): we are not connected (status=0). do nothing! (7396) DEBUG: relayEvent (AmB2BSession.cpp:163): AmB2BSession::relayEvent: id=24586875-4677A4390000B604-B77F5BB0 (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: processEvents (AmEventQueue.cpp:71): event processed (7396) DEBUG: run (AmSession.cpp:301): 5f211c238834357fNTA0NmE0M2ZkM2Y4MTg0YmU4NjQzNTllM2Q1YzliZGE. dlg.getUACTransPending() = 0 (7396) DEBUG: destroy (AmSession.cpp:351): AmSession::destroy() (7396) DEBUG: stopAndQueue (AmSessionContainer.cpp:121): session cleaner about to stop 4B592026-4677A4390000B272-B7D356C0 (7396) DEBUG: stop (AmThread.cpp:144): Thread -1216390224 (-1216390224) calling on_stop, give it a chance to clean up. (7396) DEBUG: on_stop (AmSession.cpp:341): AmSession::on_stop() (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:135): AmMediaProcessor::removeSession (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:140): callgroup is '4B592026-4677A4390000B272-B7D356C0', thread 0 (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:155): callgroup empty, erasing it. (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: stop (AmThread.cpp:159): Thread -1216390224 (-1216390224) finished detach. (7396) DEBUG: destroySession (AmSessionContainer.cpp:148): session stopped and queued for deletion (#sessions=1) (7396) DEBUG: run (AmSession.cpp:334): session is stopped. (7396) DEBUG: _start (AmThread.cpp:77): Thread -1216390224 is ending. (7396) DEBUG: processEvents (AmEventQueue.cpp:69): before processing event (7396) DEBUG: onOtherBye (AmB2BSession.cpp:173): onOtherBye() (7396) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/6FA7E90A-4677A43E0005A3C6-B78F6BB0 (7396) DEBUG: write_to_socket (AmUtils.cpp:590): sending: <:t_uac_cancel:/tmp/6FA7E90A-4677A43E0005A3C6-B78F6BB0 06103761-4677A4390000B60A-B77F5BB0(a)212.6.123.119 10 > (7396) DEBUG: write_to_socket (AmUtils.cpp:616): write to unix socket: completed (7396) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <200 uac_cancel succeeded> (7396) DEBUG: processEvents (AmEventQueue.cpp:71): event processed (7396) DEBUG: run (AmSession.cpp:301): 06103761-4677A4390000B60A-B77F5BB0(a)212.6.123.119 dlg.getUACTransPending() = 1 (7396) DEBUG: processEvents (AmEventQueue.cpp:69): before processing event (7396) DEBUG: gotoNextItem (AmPlaylist.cpp:62): posting AmAudioEvent::noAudio event! (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: clearAudio (AmSession.cpp:418): Audio cleared !!! (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: process (AmMediaProcessor.cpp:336): Session removed from the scheduler (7396) DEBUG: processEvents (AmEventQueue.cpp:71): event processed (7396) DEBUG: run (AmServer.cpp:93): revents = 1 (7396) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <487 Request Terminated ###################################################################################### This is the logfile, when a segmentation fault occured: (7396) DEBUG: write_to_socket (AmUtils.cpp:616): write to unix socket: completed (7396) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <200 Succeeded> (7396) DEBUG: onBye (AnnounceB2B.cpp:139): @@@@ AnnounceCallerDialog::onBye() (7396) DEBUG: onBye (AnnounceB2B.cpp:149): @@@@ onBye: Callee is not connected. (7396) DEBUG: onBye (AnnounceB2B.cpp:150): @@@@ onBye: Stopping Ringtone ... (7396) DEBUG: close (AmRingToneGenerator.cpp:43): AmRingTone::close : Beende Ringtone (7396) DEBUG: bye (AmSipDialog.cpp:385): bye(): we are not connected (status=0). do nothing! (7396) DEBUG: relayEvent (AmB2BSession.cpp:163): AmB2BSession::relayEvent: id=6D8F12F3-4677A44A0003123F-B78F6BB0 (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: processEvents (AmEventQueue.cpp:71): event processed (7396) DEBUG: run (AmSession.cpp:301): b349570a90498523NTA0NmE0M2ZkM2Y4MTg0YmU4NjQzNTllM2Q1YzliZGE. dlg.getUACTransPending() = 0 (7396) DEBUG: destroy (AmSession.cpp:351): AmSession::destroy() (7396) DEBUG: stopAndQueue (AmSessionContainer.cpp:121): session cleaner about to stop 100D78B4-4677A44A00030E24-B7D356C0 (7396) DEBUG: stop (AmThread.cpp:144): Thread -1215337552 (-1215337552) calling on_stop, give it a chance to clean up. (7396) DEBUG: on_stop (AmSession.cpp:341): AmSession::on_stop() (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:135): AmMediaProcessor::removeSession (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:140): callgroup is '100D78B4-4677A44A00030E24-B7D356C0', thread 0 (7396) DEBUG: removeFromProcessor (AmMediaProcessor.cpp:155): callgroup empty, erasing it. (7396) DEBUG: postEvent (AmEventQueue.cpp:48): AmEventQueue: trying to post event (7396) DEBUG: postEvent (AmEventQueue.cpp:56): AmEventQueue: event posted (7396) DEBUG: stop (AmThread.cpp:159): Thread -1215337552 (-1215337552) finished detach. (7396) DEBUG: destroySession (AmSessionContainer.cpp:148): session stopped and queued for deletion (#sessions=1) (7396) DEBUG: run (AmSession.cpp:334): session is stopped. (7396) DEBUG: _start (AmThread.cpp:77): Thread -1215337552 is ending. (7396) DEBUG: processEvents (AmEventQueue.cpp:69): before processing event (7396) DEBUG: onOtherBye (AmB2BSession.cpp:173): onOtherBye() (7396) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/0B1C4E05-4677A456000C0056-B77F5BB0 (7396) DEBUG: write_to_socket (AmUtils.cpp:590): sending: <:t_uac_cancel:/tmp/0B1C4E05-4677A456000C0056-B77F5BB0 70C64043-4677A44A00031246-B78F6BB0(a)212.6.123.119 10 > (7396) DEBUG: write_to_socket (AmUtils.cpp:616): write to unix socket: completed (7396) DEBUG: cacheMsg (AmCtrlInterface.cpp:186): recv-ed: <200 uac_cancel succeeded> (7396) DEBUG: processEvents (AmEventQueue.cpp:71): event processed (7396) DEBUG: run (AmSession.cpp:301): 70C64043-4677A44A00031246-B78F6BB0(a)212.6.123.119 dlg.getUACTransPending() = 1 Segmentation fault It seems to me that there happens something in process handling of SEMS. I have no special process() function in my module Any ideas? regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGd6gO4tZeNddg3dwRAsS9AJ9glBjLpRPUuy++Yg3l4xY/xMnXYQCeMLBW n3WE/kinb91A7Rw4IJaGQiE= =N2sn -----END PGP SIGNATURE-----

2 1

[Users] FreeRADIUS and OpenSER 1.1.1
by liran tal 20 Jun '07

20 Jun '07

Hey everyone, I am using OpenSER 1.1.1 and FreeRADIUS 1.1.3, as it seems this problem: Info: rlm_sql (sql): Unsupported Acct-Status-Type = 15 is quite familiar and from my bit of googling it mentions that the problem is that tha radiusclient in openser sends the kind of status type which is not supported in freeradius's rlm_sql module. Is this issue already fixed in newer versions? I would very appreciate it if someone can tell me the status of this problem. Thanks, Regards, Liran.

3 2

[Users] Many crashes on Openser system
by Antonio Higuera 20 Jun '07

20 Jun '07

Hello list, I am trying to put up and ready a system based on openser. I am using Openser 1.2.1 from the SVN. The problem is that the system crashes continously without an aparent reason when is managing an INVITE request from X-Lite. Openser is able to manage a couple of calls and after that it crashes. I dont really know if the configuration script has something to do with this behaviour (I put the script attached). The problem seems to be located in the avp.c function as per the following backtrace generated from a coredump. I put also below the logs. If you need more information, please let me know. Thanks very much for your help. GNU gdb 6.4.90-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1". warning: Can't read pathname for load map: Error de entrada/salida. Reading symbols from /lib/tls/i686/cmov/libdl.so.2...done. Loaded symbols for /lib/tls/i686/cmov/libdl.so.2 Reading symbols from /lib/tls/i686/cmov/libresolv.so.2...done. Loaded symbols for /lib/tls/i686/cmov/libresolv.so.2 Reading symbols from /lib/tls/i686/cmov/libc.so.6...done. Loaded symbols for /lib/tls/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/openser/modules/mysql.so...done. Loaded symbols for //lib/openser/modules/mysql.so Reading symbols from /lib/tls/i686/cmov/libm.so.6...done. Loaded symbols for /lib/tls/i686/cmov/libm.so.6 Reading symbols from /usr/lib/libmysqlclient.so.15...done. Loaded symbols for /usr/lib/libmysqlclient.so.15 Reading symbols from /usr/lib/libz.so.1...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/tls/i686/cmov/libpthread.so.0...done. Loaded symbols for /lib/tls/i686/cmov/libpthread.so.0 Reading symbols from /lib/tls/i686/cmov/libcrypt.so.1...done. Loaded symbols for /lib/tls/i686/cmov/libcrypt.so.1 Reading symbols from /lib/tls/i686/cmov/libnsl.so.1...done. Loaded symbols for /lib/tls/i686/cmov/libnsl.so.1 Reading symbols from /lib/openser/modules/sl.so...done. Loaded symbols for //lib/openser/modules/sl.so Reading symbols from /lib/openser/modules/tm.so...done. Loaded symbols for //lib/openser/modules/tm.so Reading symbols from /lib/openser/modules/rr.so...done. Loaded symbols for //lib/openser/modules/rr.so Reading symbols from /lib/openser/modules/maxfwd.so...done. Loaded symbols for //lib/openser/modules/maxfwd.so Reading symbols from /lib/openser/modules/usrloc.so...done. Loaded symbols for //lib/openser/modules/usrloc.so Reading symbols from /lib/openser/modules/registrar.so...done. Loaded symbols for //lib/openser/modules/registrar.so Reading symbols from /lib/openser/modules/auth.so...done. Loaded symbols for //lib/openser/modules/auth.so Reading symbols from /lib/openser/modules/auth_db.so...done. Loaded symbols for //lib/openser/modules/auth_db.so Reading symbols from /lib/openser/modules/uri.so...done. Loaded symbols for //lib/openser/modules/uri.so Reading symbols from /lib/openser/modules/uri_db.so...done. Loaded symbols for //lib/openser/modules/uri_db.so Reading symbols from /lib/openser/modules/domain.so...done. Loaded symbols for //lib/openser/modules/domain.so Reading symbols from /lib/openser/modules/textops.so...done. Loaded symbols for //lib/openser/modules/textops.so Reading symbols from /lib/openser/modules/avpops.so...done. Loaded symbols for //lib/openser/modules/avpops.so Reading symbols from /lib/openser/modules/permissions.so...done. Loaded symbols for //lib/openser/modules/permissions.so Reading symbols from /lib/openser/modules/enum.so...done. Loaded symbols for //lib/openser/modules/enum.so Reading symbols from /lib/openser/modules/acc.so...done. Loaded symbols for //lib/openser/modules/acc.so Reading symbols from /lib/openser/modules/dialog.so...done. Loaded symbols for //lib/openser/modules/dialog.so Reading symbols from /lib/openser/modules/mi_fifo.so...done. Loaded symbols for //lib/openser/modules/mi_fifo.so Reading symbols from /lib/openser/modules/snmpstats.so...done. Loaded symbols for //lib/openser/modules/snmpstats.so Reading symbols from /usr/local/lib/libnetsnmpmibs.so.15...done. Loaded symbols for /usr/local/lib/libnetsnmpmibs.so.15 Reading symbols from /usr/local/lib/libnetsnmpagent.so.15...done. Loaded symbols for /usr/local/lib/libnetsnmpagent.so.15 Reading symbols from /usr/local/lib/libnetsnmphelpers.so.15...done. Loaded symbols for /usr/local/lib/libnetsnmphelpers.so.15 Reading symbols from /usr/local/lib/libnetsnmp.so.15...done. Loaded symbols for /usr/local/lib/libnetsnmp.so.15 Reading symbols from /usr/lib/i686/cmov/libcrypto.so.0.9.8...done. Loaded symbols for /usr/lib/i686/cmov/libcrypto.so.0.9.8 Reading symbols from /usr/lib/libsensors.so.3...done. Loaded symbols for /usr/lib/libsensors.so.3 Reading symbols from /lib/libsysfs.so.2...done. Loaded symbols for /lib/libsysfs.so.2 Reading symbols from /lib/openser/modules/xlog.so...done. Loaded symbols for //lib/openser/modules/xlog.so Reading symbols from /lib/openser/modules/lcr.so...done. Loaded symbols for //lib/openser/modules/lcr.so Reading symbols from /lib/openser/modules/pdt.so...done. Loaded symbols for //lib/openser/modules/pdt.so Reading symbols from /lib/tls/i686/cmov/libnss_files.so.2...done. Loaded symbols for /lib/tls/i686/cmov/libnss_files.so.2 Reading symbols from /lib/tls/i686/cmov/libnss_dns.so.2...done. Loaded symbols for /lib/tls/i686/cmov/libnss_dns.so.2 Core was generated by `openser -f 4.cfg'. Program terminated with signal 11, Segmentation fault. #0 search_next_avp (avp=0x82, val=0xbfef3ca8) at usr_avp.c:235 235 if ( id==avp->id && (avp->flags&AVP_NAME_STR)==0 (gdb) backtrace #0 search_next_avp (avp=0x82, val=0xbfef3ca8) at usr_avp.c:235 #1 0xb7b00866 in legs2strar (legs=0x81932c8, rq=0xb58d4e48, val_arr=0xb7b134b8) at acc_extra.c:313 #2 0xb7aff696 in acc_db_request (rq=0xb58d4e48) at acc.c:383 #3 0xb7b015d7 in tmcb_func (t=0xb58ca420, type=128, ps=0xb7bdfe14) at acc_logic.c:376 #4 0xb7bba513 in run_trans_callbacks (type=128, trans=0xb58ca420, req=0xb58d4e48, rpl=0x819bc90, code=200) at t_hooks.c:205 #5 0xb7bcffa5 in relay_reply (t=0xb58ca420, p_msg=0x819bc90, branch=<value optimized out>, msg_status=200, cancel_bitmap=0xbfef3f00) at t_reply.c:1150 #6 0xb7bd1a8c in reply_received (p_msg=0x819bc90) at t_reply.c:1383 #7 0x0805fd3f in forward_reply (msg=0x819bc90) at forward.c:489 #8 0x08083486 in receive_msg ( buf=0x813daa0 "SIP/2.0 200 OK\r\nVia: SIP/2.0/UDP 192.168.1.129;branch= z9hG4bK6f62.874d7d27.0;received=192.168.1.129\r\nVia: SIP/2.0/UDP 192.168.222.86:27880;branch=z9hG4bK-d87543-714c824f3363f248-1--d87543-\r\nRecord-Rou"..., len=850, rcv_info=0xbfef3ff8) at receive.c:195 #9 0x080b409a in udp_rcv_loop () at udp_server.c:451 #10 0x0806f587 in main_loop () at main.c:834 #11 0x08070d55 in main (argc=3, argv=0xbfef41b4) at main.c:1393 The following lines are the log generated: Jun 7 10:42:04 marge openser[1545]: receive_msg: cleaning up Jun 7 10:42:04 marge openser[1565]: ERROR: receive_fd: EOF on 8 Jun 7 10:42:04 marge openser[1565]: DBG: handle_ser_child: dead child 2, pid 1546 (shutting down?) Jun 7 10:42:04 marge openser[1565]: DBG: io_watch_del (0x812d720, 8, -1, 0x0) fd_no=23 called Jun 7 10:42:04 marge openser[1544]: child process 1546 exited by a signal 11 Jun 7 10:42:04 marge openser[1544]: core was generated Jun 7 10:42:04 marge openser[1544]: INFO: terminating due to SIGCHLD Jun 7 10:42:04 marge openser[1552]: INFO: signal 15 received Jun 7 10:42:04 marge openser[1552]: Memory status (pkg): Jun 7 10:42:04 marge openser[1552]: fm_status (0x816e3e0): Jun 7 10:42:04 marge openser[1552]: heap size= 1048576 Jun 7 10:42:04 marge openser[1552]: used= 155064, used+overhead=186160, free=862416 Jun 7 10:42:04 marge openser[1552]: max used (+overhead)= 186376 Jun 7 10:42:04 marge openser[1552]: dumping free list: Jun 7 10:42:04 marge openser[1552]: hash = 3 fragments no.: 1, unused: 0 bucket size: 24 - 24 (first 24) Jun 7 10:42:04 marge openser[1552]: hash = 5 fragments no.: 1, unused: 0 bucket size: 40 - 40 (first 40) Jun 7 10:42:04 marge openser[1552]: hash = 19 fragments no.: 1, unused: 0 bucket size: 152 - 152 (first 152) Jun 7 10:42:04 marge openser[1552]: hash = 2054 fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 862336) Jun 7 10:42:04 marge openser[1552]: TOTAL: 4 free fragments = 862552 free bytes Jun 7 10:42:04 marge openser[1552]: ----------------------------- Jun 7 10:42:04 marge openser[1565]: INFO: signal 15 received Jun 7 10:42:04 marge openser[1565]: Memory status (pkg): Jun 7 10:42:04 marge openser[1565]: fm_status (0x816e3e0): .......

2 1

[Users] Register openser and asterisk with one openser sip account
by Zen Kato 20 Jun '07

20 Jun '07

Asterisk is used for voicemail, conference(meetme) and auto dial using auto dial file from asterisk agi-bin. Is there easy way to register at asterisk after registering openser? The old windows version(v.2.0) and linux version of xlite could have two sip accounts. I can register to openser using on sip.conf of asterisk: [general] register => 001:password@sip_proxy/001 register => 002:password@sip_proxy/002 .......... [sip] [001] type=friend host=dynamic ... [002] type=friend host=dynamic ... in this way, if a user changed his/her password using serweb, the password in subscriber table of openser data base will be changed, but the user can not change hard-coded his/her password in sip.conf. Regards, Zen

2 1

[Users] Openser Presence Server
by li wang 20 Jun '07

20 Jun '07

Dear all, I can use Openser to set up the Presence Server and connect it to my IMS platform. My question is: 1. It is possible to add the additional functionnality for Presence into Presence Server? Should i modify the code source directly? 2. Because in a environment IMS, higher application can be developped based on Enabling Services which include Presence, IM, etc. So can Openser be interact with other SIP AS? How? Thanks for give some hint or documentation lien, i am not very familiar with Openser. Best Regards, li _________________________________________________________________ Gagnez des écrans plats avec Live.com http://www.image-addict.fr/

2 4

[Users] what is the maximum concurrent registrations do openser have
by Kerry 20 Jun '07

20 Jun '07

Hi, what is the maximum concurrent registrations do openser have Thanks 　　　　　　　　Kerry 　　　　　　　　sukerry(a)126.com 　　　　　　　　　　2007-06-20

2 1

Re: [Serusers] Call waiting and accounting
by inge 19 Jun '07

19 Jun '07

Hi Jai, That's the mean I used to provide call forward : In route[3] : # ----------------------------------- Mark the CFU ---------------------------------- if (avp_db_load("$ruri/username", "s:cfu/usr_callfw")) { setflag(22); avp_pushto("$ruri", "s:cfu"); route(30); route(1); break; }; # ----------------------------------- Mark the CFB ----------------------------------- if (avp_db_load("$ruri/username", "s:cfb/usr_callfw")) { if (!avp_check("s:cfb", "eq/$ruri/i")) { setflag(20); }; }; # ----------------------------------- Mark the CFNA ----------------------------------- if (avp_db_load("$ruri/username", "s:cfna/usr_callfw")) { if (!avp_check("s:cfna", "eq/$ruri/i")) { setflag(21); }; }; For CFU I put the result taken from DB directly in URI and route to PSTN. For CFB & CFNA I do the same treatment but with an other way with a flag. In the failure route : if (isflagset(20) && t_check_status("486")) { if (avp_pushto("$ruri", "s:cfb")) { avp_delete("s:cfb"); resetflag(20); setflag(23); xlog("L_WARN","time=[%Tf] call id=[%ci] call seq=[%cs] contact header=[%ct] from uri=[%fu] from tag=[%ft] request's method=[%rm] request's uri=[%ru] to uri=[%tu] to tag=[%tt] sip message id=[%mi] process id=[%pp] ip source=[%is] flags=[%mf], Forward on busy\n"); route(30); route(1); break; }; }; Sincerely, Adrien Le vendredi 15 juin 2007 à 08:34 -0700, Jai Rangi a écrit : > Hello Igne, > Can you please share the piece of code for this. > > Thank you, > -Jai > On 6/15/07, inge <inge(a)legos.fr> wrote: > Hi Jai, > > I don't have problems with caller ID. In a case of CFNA/CFB or > CFU, I > see on the terminal the right caller id. > > I think thanks to unchange sip_from/sip_to URI, wich were use > for > signalisation maybe. > > > Le mardi 12 juin 2007 à 16:28 -0700, Jai Rangi a écrit : > > Not only billing part, but for caller id also. The final > destination > > should see the right caller id (Original call generator). > > Can you please share where I can find such a plugin. I have > been > > looking for something like that. > > > > Thank you, > > -Jai > > > > > > On 6/11/07, inge <inge(a)legos.fr> wrote: > > Hi Greger, > > > > Thanks for you answer and sorry for mine, I was away > from my > > office > > since some days. > > > > In fact, it's a very special case. But finally I can > see the > > forward > > with i_uri and o_uri in my acc table. So I just have > to add a > > plugin in > > my script for use i_uri and o_uri instead of > sip_from/to > > according to > > some rules. > > > > Regards > > > > Le mardi 22 mai 2007 à 07:06 +0200, Greger V. Teigre > a écrit : > > > Well, call forwarding is always a special case > because you > > need to get > > > the billing right according to how your billing > app needs > > it. Look at > > > the INVITE that comes for call forwarding and test > for it in > > your > > > script. > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

2 3

[Serusers] SER with multiple domain and databases
by Abdul Qadir 19 Jun '07

19 Jun '07

Hi, I am using freeradius with SER and oracle. Currently i have one domain for my SER. I want my SER to support another domain and separate database for second domain. Is it possible to configure Radius server to connect with two databases and perform queries based on URI or some other criteria eg. user(a)domainA.com should go to domainA database and user(a)domainB.com should go to domainB database. Thanking you all in advance. Best Regards, Abdul Qadir --------------------------------- Got a little couch potato? Check out fun summer activities for kids.

2 1

[Users] IP based register allow
by ibrahim.tunali＠comturk.com 19 Jun '07

19 Jun '07

Hi, I want to permit IP based REGISTER requests so i created register.allow and register.deny. But i couldn't success permission to REGISTER. Also I check register.allow and register.deny file on SVN trunk but it's very simple. register.allow; "^sip:555[0-9]{7}@" : 1.2.3.4 register.deny; ALL:ALL Regards, Ibrahim Tunali

1 0

[Serusers] cannot define avpops variable
by Meidiana Ten 19 Jun '07

19 Jun '07

Hello again, I've solved the python problem already I didn't read carefully how to set up avpops in the tutorial sorry bout that..=) I've done what u told me before to set the the avp_write like following: avp_write("imap://'$tu':vmailuser@pcr.ac.id:143/INBOX","$mailbox_url"); but when I saw SEMS debug, it shown like below: (4908) DEBUG: Ivr-Python: ***** Mailbox Url: ****** url: imap://'$tu':vmailuser@pcr.ac.id:143/INBOX user: '$tu' passwd: vmailuser host: pcr.ac.id port: 143 path: INBOX in the user field, the $tu cannot be defined. when I check /var/log/maillog, the following error login in imap server is occured : Jun 18 15:09:51 pcr authdaemond: authmysql: trying this module Jun 18 15:09:51 pcr authdaemond: SQL query: SELECT username, "", 'vmailuser', '507', '507', '/home/vmail', email_address, "", first_name, "" FROM subscriber WHERE username = " $tu " Jun 18 15:09:51 pcr authdaemond: zero rows returned Jun 18 15:09:51 pcr authdaemond: no password available to compare Jun 18 15:09:51 pcr authdaemond: authmysql: REJECT - try next module Please tell me what to do. Thanx before Regards, Meidiana --------------------------------- Pinpoint customers who are looking for what you sell.

1 0

[Serusers] cannot define avpops variable
by Meidiana Ten 19 Jun '07

19 Jun '07

Hello again, I've solved the python problem already I didn't read carefully how to set up avpops in the tutorial sorry bout that..=) I've done what u told me before to set the the avp_write like following: avp_write("imap://'$tu':vmailuser@pcr.ac.id:143/INBOX","$mailbox_url"); but when I saw SEMS debug, it shown like below: (4908) DEBUG: Ivr-Python: ***** Mailbox Url: ****** url: imap://'$tu':vmailuser@pcr.ac.id:143/INBOX user: '$tu' passwd: vmailuser host: pcr.ac.id port: 143 path: INBOX in the user field, the $tu cannot be defined. when I check /var/log/maillog, the following error login in imap server is occured : Jun 18 15:09:51 pcr authdaemond: authmysql: trying this module Jun 18 15:09:51 pcr authdaemond: SQL query: SELECT username, "", 'vmailuser', '507', '507', '/home/vmail', email_address, "", first_name, "" FROM subscriber WHERE username = " $tu " Jun 18 15:09:51 pcr authdaemond: zero rows returned Jun 18 15:09:51 pcr authdaemond: no password available to compare Jun 18 15:09:51 pcr authdaemond: authmysql: REJECT - try next module Please tell me what to do. Thanx before Regards, Meidiana --------------------------------- Got a little couch potato? Check out fun summer activities for kids.

1 0

[Users] LCR failover problem
by raviprakash sunkara 19 Jun '07

19 Jun '07

Hello users The below is my lcr logic . When the first gateway is failed and second gateway of lcr, has to ruoute the pstn gateway. but, it say the 400 Bad request, route[4] { load_gws(); next_gws(); t_on_failure("2"); route(2) ; } route[2] { t_relay(); exit; } fialure_route[2] { next_gws(); t_on_failure("2"); route(2); } -- Thanks &Regards Ravi Prakash Sunkara

2 2

[Users] openser as a relay to another openser
by Frank Cases 19 Jun '07

19 Jun '07

Can anyone help out to make a default config to allow a static ip to use an openser that would just push the calls to another openser ? What I have tried yet is non working. 201.1.2.3 is one of our term boxes. 1.2.3.4 is the static ip to allow (eg clients asterisk) 5.6.7.8 is ser termination Each time I place a call from 1.2.3..4 to this box 5.5.5.5 and relay to 5.6.7.8 the (5.6.7.8) replies with No Direct Communications, Please >From if(uri == myself) { route[0] { if(msg:len > max_len) { xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("513", "Message Too Big"); exit; } if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("483", "Too Many Hops"); exit; } if(method == "INVITE") { record_route(); } if(allow_trusted() && loose_route()) { if(!t_relay()) { sl_send_reply("503", "Service Failure to Relay"); } exit; } else if( $si=="1.2.3.4" && loose_route()) { if(!t_relay()) { sl_send_reply("503", "Service Failure to Relay"); } exit; } if($si == "1.2.3.4") { # Do your gateway selection and t_on_failure() here rewritehost("5.6.7.8"); } if(uri == myself) { sl_send_reply("403", "No Direct Communications, Please"); exit; } if($si=="1.2.3.4" && (uri =~ "@201\.1\.2\.3")) { if(!t_relay()) { sl_send_reply("503", "Service Unavailable"); } } else { sl_send_reply("403", "Forbidden"); } }

2 1

[Serusers] parse_uri: bad char
by Michael Grigoni 19 Jun '07

19 Jun '07

(SER 0.8.99-dev19 openbsd/sparc w/local patches) Greetings: We have rarely received INVITES from UAs not registered on our SER host (from the outside) but as I am setting up a means for a Internet users from foreign realms to listen to audio by making a call to a UA on our network it is now necessary to process foreign INVITES. Some years ago, this worked as I have logs of successful foreign calls and I have not changed ser.cfg substantially since then, however now I have this problem: 06/17/07 02:13:34 8(3695) ERROR: parse_uri: bad char '@' in state 5 parsed: <sip:9202@cybertheque.org> (24) / <sip:9202@cybertheque.org@10.0.2.200:5060> (40) 06/17/07 02:13:35 8(3695) extract_aor(): Error while parsing Address of Record 06/17/07 02:13:35 8(3695) lookup(): Error while extracting address of record The foreign caller is dialing SIP:9202@cybertheque.org; cybertheque.org is one of our aliases -- it is the external domain. The internal alias is 'cybertheque.net'; a UA on internal networks simply would dial '9202'. The UA receiving the INVITE is on an internal host with address 10.0.2.200. I could try 'replace_all("@cybertheque.org","");' but I would like some advice as to the nature of the problem as well. I would also need some test calls from the outside to debug the changes. Anyone willing to call a few times (and let me know before you do so I can make the changes to ser.cfg)? Thanks, Michael

3 5

[Serusers] How to block m_dump() for some users
by tzieleniewski 19 Jun '07

19 Jun '07

Hi, I would like to block messages for particular UAs because some of my phones behave in such a manner that they do not respond to MESSAGE message. I would like to make I filter basing on the ruri. How can I compare ruri namepart with a particular value?? will something like this work if (@ruri == "sip:name@domain") ? There would be nice to have such functionality that when UA registers and there is no MESSAGE message indicated in the Allow header field the offline messages are not dumped to the UA. Cheers Thanks in advanced Tomasz

3 7

[Users] PKG_MEM_POOL_SIZE and SHM_MEM_SIZE Question?
by Alejandro Sanchez 19 Jun '07

19 Jun '07

Hello. openser 1.1 OS. Red HAt 4 server HP 4 GB RAM I have an openser instance that works like balancer with the module dispatcher an i have the following errors after a 1 day of work: ERROR: do_action: memory allocation failure Jun 17 11:00:29 /usr/local/sbin/openser[9509]: DISPATCHER:dst_update_dst: Error while setting host Jun 17 11:00:29 /usr/local/sbin/openser[9509]: DISPATCHER:ds_select_dst: cannot set dst addr Jun 17 11:00:29 /usr/local/sbin/openser[9509]: ERROR: mk_proxy: could not resolve hostname: "u1.sip.telmex.com" ERROR:tm:t_forward_nonack: failure to add branches I red in the openser site that a posible solution is to increase the memory and my question is What is the recomended memory for parameters PKG_MEM_POOL_SIZE and SHM_MEM_SIZE? Thank`s in advanced Llama gratis a cualquier PC del mundo. Con una excelente calidad de sonido. http://mx.messenger.yahoo.com/

2 3

[Users] TrixBox with OpenSER
by Joao Pereira 18 Jun '07

18 Jun '07

Hello to all I want to know if there is a distribution like TrixBox that includes OpenSER. Thanks Regards Joao Pereira

4 5

[Users] Checking Request-URI
by Andreas Sikkema 18 Jun '07

18 Jun '07

Hi, Yesterday I noticed something strange happenign one on of our servers. Calls were being sent to servers within our VoIP platform by OpenSER without (as far as I can see) really being handled according to our OpenSER configuration. When I looked into it, I found that the Request-URI contained the IP address of the internal server, instead of the IP address of our OpenSER machine or our SIP domain. How can I check that the Request-URI contains only the SIP domain or the IP address of the OpenSER server? Might this have something to do with the loose_route() block? Here's (heavily edited) basically our INVITE handling code from openser.cfg: if (loose_route()) { use_media_proxy(); t_relay(); exit; }; if (method=="INVITE") { t_on_reply("1"); rewritehost("SIP_DOMAIN"); # Check if it is international number format if (uri=~"^sip:00") { strip(2); }; if ( (method == "INVITE") ) { if (!proxy_authorize("SIP_DOMAIN", "subscriber")) { proxy_challenge("SIP_DOMAIN", "0"); exit; }; # let's check from=id ... avoids accounting confusion if (!check_from()) { sl_send_reply("403", "That is ugly -- use From=id next time (gw)"); exit; }; }; if (is_uri_host_local()) { log("ATS: incoming message is for a local host ($tu)"); route(3); }; -- Andreas Sikkema

3 5

[Users] OpenSER - 2 years old and ...
by Daniel-Constantin Mierla 18 Jun '07

18 Jun '07

... four days. One more year passed since first celebration of the OpenSER project. It was a real full year, the project itself was growing, growing and going on. We can list now a set of important milestones achieved during this period: - two major releases: 1.1.0 in July 2006 and 1.2.0 in March 2007 - yet another two minor releases: 1.1.1 in January 2007 and 1.2.1 in May 2007 - first OpenSER summit: November 2007, Berlin, Germany - first OpenSER development course, June 2007, Paris - active participation to VoIP and Open Source events around the world: VoN Berlin 2006, FOSDEM Bruxelles 2007, VoN San Jose 2007, ROSDEV 2007, eLiberatica 2007, LinuxTag 2007, VoN Europe 2007 The community is now more consistent and active in contributions. There are 21 registered developers, a lot of new modules and patches submitted to the tracker, making the number of the contributors to exceed 170 and the number of modules about 70. OpenSER has gone beyond a SIP router, entering the Application Server level via the weSIP Java SIP Servlet AS and Perl Programming Interface, both contributions from new developers at that time, plus the Presence Server. Getting more and more robust, OpenSER has been adopted by major players in VoIP arena, Cisco using it in Linksys One and Truphone launching the first FMC service, which along with many others (see http://www.openser.org/mos/view/News/NewsItem/OpenSER-gets-CISCOs-vote-of-c…) give more value to the project. I consider that the year ended few days ago was very innovative in terms of features and performances. For the new year, we hope to be able to deliver reliable solutions to market needs and make OpenSER lead the creation of new VoIP services. The second edition of the OpenSER summit will be organized in Autumn, more events to interact with community members will be organized. Here is a list of links for some news of last year: http://www.openser.org/mos/view/OpenSER-Summit-2006/ http://www.openser.org/mos/view/News/NewsItem/OpenSER-1.2.0---Perfomance-Te… http://www.openser.org/mos/blogsection/News/ http://www.openser.org/mos/view/News/NewsItem/OpenSER-1.2.1-Released/ http://www.openser.org/mos/view/News/NewsItem/Meeting-OpenSER%2C-May-June-2… http://www.openser.org/mos/view/News/NewsItem/OpenSER-at-VoN-Spring-2007/ http://www.openser.org/mos/view/News/NewsItem/OpenSER-Configuration-Generat… http://www.openser.org/mos/view/News/NewsItem/OpenSER-v1.2.0-Released/ http://www.openser.org/mos/view/News/NewsItem/OpenSER-gets-CISCOs-vote-of-c… http://www.openser.org/mos/view/News/NewsItem/DNS-based-failover/ http://www.openser.org/mos/view/News/NewsItem/New-management-interface/ http://www.openser.org/mos/view/News/NewsItem/OpenSER-v1.1.0-Released/ We like to thank to all developers, contributors and community members for their help during the entire process of coding, testing, documenting and supporting the project. Looking forward to the third year. Cheers, Daniel

1 0

[Users] error: xmlrpc.h: No such file or directory
by kjcsb 18 Jun '07

18 Jun '07

I am trying to make openser-1.2.0-notls and get the following error: In file included from mi_xmlrpc.c:38: mi_xmlrpc.h:35:20: error: xmlrpc.h: No such file or directory In file included from mi_xmlrpc.c:38: mi_xmlrpc.h:37: error: syntax error before âenvâ mi_xmlrpc.h:37: warning: type defaults to âintâ in declaration of âenvâ mi_xmlrpc.h:37: warning: data definition has no type or storage class mi_xmlrpc.h:38: error: syntax error before â*â token mi_xmlrpc.h:38: warning: type defaults to âintâ in declaration of âxr_responseâ mi_xmlrpc.h:38: warning: data definition has no type or storage class In file included from mi_xmlrpc.c:39: xr_writer.h:37: error: syntax error before â*â token xr_writer.h:38: error: syntax error before â*â token In file included from mi_xmlrpc.c:40: xr_parser.h:36: error: syntax error before â*â token In file included from mi_xmlrpc.c:41: xr_server.h:35: error: syntax error before â*â token xr_server.h:35: error: syntax error before â*â token xr_server.h:36: warning: type defaults to âintâ in declaration of âdefault_methodâ xr_server.h:36: warning: data definition has no type or storage class xr_server.h:38: error: syntax error before â*â token mi_xmlrpc.c:44:26: error: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c:50: error: syntax error before âenvâ mi_xmlrpc.c:50: warning: type defaults to âintâ in declaration of âenvâ mi_xmlrpc.c:50: warning: data definition has no type or storage class mi_xmlrpc.c:51: error: syntax error before â*â token mi_xmlrpc.c:51: warning: type defaults to âintâ in declaration of âxr_responseâ mi_xmlrpc.c:51: warning: data definition has no type or storage class mi_xmlrpc.c: In function âmod_child_initâ: mi_xmlrpc.c:162: warning: implicit declaration of function âxmlrpc_server_abyss_init_registryâ mi_xmlrpc.c:172: error: âxmlrpc_server_abyss_rpc2_handlerâ undeclared (first use in this function) mi_xmlrpc.c:172: error: (Each undeclared identifier is reported only once mi_xmlrpc.c:172: error: for each function it appears in.) mi_xmlrpc.c:178: error: âxmlrpc_server_abyss_default_handlerâ undeclared (first use in this function) mi_xmlrpc.c:193: warning: implicit declaration of function âxmlrpc_env_initâ mi_xmlrpc.c:196: warning: implicit declaration of function âxmlrpc_build_valueâ mi_xmlrpc.c:196: warning: assignment makes pointer from integer without a cast mi_xmlrpc.c:197: error: request for member âfault_occurredâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:198: error: request for member âfault_stringâ in something not a structure or union mi_xmlrpc.c:219: warning: implicit declaration of function âxmlrpc_env_cleanâ mi_xmlrpc.c:220: warning: implicit declaration of function âxmlrpc_DECREFâ make[1]: *** [mi_xmlrpc.o] Error 1 make[1]: Leaving directory `/usr/src/openser-1.2.0-notls/modules/mi_xmlrpc' make: *** [modules] Error 2 rpm -q xmlrpc-c-devel xmlrpc-c-devel-1.04-1.fc4 find -name xmlrpc.h ./usr/include/xmlrpc-c/xmlrpc.h Any suggestions would be appreciated. Regards Cameron

7 18

[Users] how to control channels
by ram 18 Jun '07

18 Jun '07

Hi Is there any way, i can control channels like asterisk per user this many channels to make calls out. how can i achive the same with openSER any examples. ram

2 2

[Users] XMPP module: network.c file error
by isetien001＠ikasle.ehu.es 18 Jun '07

18 Jun '07

Hi! I'm trying to make xmpp module, to do this I'm configurating according to my file system several files (xmpp_component.c, util.c, xmpp.c ...). But I get error while compiling the file 'network.c'. I don't know where these errors come from because the rest of the files are OK. These are the errors and my 'network.c' file: Any help would be wellcomed. Izortze. network.c:27: error: expected =, ,, ;, asm or __attribute__ before < token network.c: In function net_connect: network.c:95: error: storage size of sin isnt known network.c:97: warning: implicit declaration of function memset network.c:97: warning: incompatible implicit declaration of built-in function memset network.c:97: error: invalid application of sizeof to incomplete type struct sockaddr_in network.c:98: error: AF_INET undeclared (first use in this function) network.c:98: error: (Each undeclared identifier is reported only once network.c:98: error: for each function it appears in.) network.c:99: warning: implicit declaration of function htons network.c:101: warning: implicit declaration of function inet_aton network.c:104: warning: implicit declaration of function DBG network.c:106: warning: implicit declaration of function gethostbyname network.c:106: warning: assignment makes pointer from integer without a castnetwork.c:107: warning: implicit declaration of function LOG network.c:107: error: L_ERR undeclared (first use in this function) network.c:108: warning: implicit declaration of function hstrerror network.c:108: error: h_errno undeclared (first use in this function) network.c:111: warning: implicit declaration of function memcpy network.c:111: warning: incompatible implicit declaration of built-in function memcpy network.c:111: error: dereferencing pointer to incomplete type network.c:111: error: dereferencing pointer to incomplete type network.c:114: warning: implicit declaration of function socket network.c:114: error: PF_INET undeclared (first use in this function) network.c:114: error: SOCK_STREAM undeclared (first use in this function) network.c:115: warning: implicit declaration of function strerror network.c:115: error: errno undeclared (first use in this function) network.c:119: warning: implicit declaration of function inet_ntoa network.c:121: warning: implicit declaration of function connect network.c:121: error: invalid application of sizeof to incomplete type struct sockaddr_in network.c:123: warning: implicit declaration of function close network.c:95: warning: unused variable sin network.c: In function net_send: network.c:137: warning: implicit declaration of function send network.c: In function net_printf: network.c:149: error: va_list undeclared (first use in this function) network.c:149: error: expected ; before args network.c:152: warning: implicit declaration of function va_start network.c:152: error: args undeclared (first use in this function) network.c:153: warning: implicit declaration of function vsnprintf network.c:154: warning: implicit declaration of function va_end network.c:158: warning: implicit declaration of function strlen network.c:158: warning: incompatible implicit declaration of built-in function strlen network.c: In function net_read_static: network.c:166: warning: implicit declaration of function recv network.c:168: error: L_ERR undeclared (first use in this function) network.c:168: error: errno undeclared (first use in this function) network.c:169: error: NULL undeclared (first use in this function) make: *** [network.o] Error 1 /* * $Id: network.c 1827 2007-03-12 15:22:53Z bogdan_iancu $ * */ include <stdio.h> include <stdlib.h> include <string.h> include <unistd.h> include <stdarg.h> include <errno.h> include <sys/socket.h> include <netinet/in.h> include <arpa/inet.h> include <netdb.h> include "/usr/local/src/openser-1.2.0/sip-server/sr_module.h" int net_listen(char *server, int port) { int fd; struct sockaddr_in sin; int on = 1; memset(&sin, 0, sizeof(struct sockaddr_in)); sin.sin_family = AF_INET; sin.sin_port = htons(port); if (!inet_aton(server, &sin.sin_addr)) { struct hostent *host; DBG("xmpp: resolving %s...\n", server); if (!(host = gethostbyname(server))) { LOG(L_ERR, "xmpp: resolving %s failed (%s).\n", server, hstrerror(h_errno)); return -1; } memcpy(&sin.sin_addr, host->h_addr_list[0], host->h_length); } if ((fd = socket(PF_INET, SOCK_STREAM, 0)) < 0) { LOG(L_ERR, "xmpp: cannot socket(): %s\n", strerror(errno)); return -1; } DBG("xmpp: listening on %s:%d\n", inet_ntoa(sin.sin_addr), port); if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) < 0) { LOG(L_WARN, "xmpp: cannot setsockopt(SO_REUSEADDR): %s\n", strerror(errno)); } if (bind(fd, (struct sockaddr *) &sin, sizeof(struct sockaddr_in)) < 0) { LOG(L_ERR, "xmpp: cannot bind(): %s\n", strerror(errno)); close(fd); return -1; } if (listen(fd, 1) < 0) { LOG(L_ERR, "xmpp: cannot listen(): %s\n", strerror(errno)); close(fd); return -1; } return fd; } int net_connect(char *server, int port) { int fd; struct sockaddr_in sin; memset(&sin, 0, sizeof(struct sockaddr_in)); sin.sin_family = AF_INET; sin.sin_port = htons(port); if (!inet_aton(server, &sin.sin_addr)) { struct hostent *host; DBG("xmpp: resolving %s...\n", server); if (!(host = gethostbyname(server))) { LOG(L_ERR, "xmpp: resolving %s failed (%s).\n", server, hstrerror(h_errno)); return -1; } memcpy(&sin.sin_addr, host->h_addr_list[0], host->h_length); } if ((fd = socket(PF_INET, SOCK_STREAM, 0)) < 0) { LOG(L_ERR, "xmpp: cannot socket(): %s\n", strerror(errno)); return -1; } DBG("xmpp: connecting to %s:%d...\n", inet_ntoa(sin.sin_addr), port); if (connect(fd, (struct sockaddr *) &sin, sizeof(struct sockaddr_in)) < 0) { LOG(L_ERR, "xmpp: cannot connect(): %s\n", strerror(errno)); close(fd); return -1; } DBG("xmpp: connected to %s:%d...\n", inet_ntoa(sin.sin_addr), port); return fd; } int net_send(int fd, const char *buf, int len) { const char *p = buf; int res; do { res = send(fd, p, len, 0); if (res <= 0) return res; len -= res; p += res; } while (len); return (p - buf); } int net_printf(int fd, char *format, ...) { va_list args; char buf[4096]; va_start(args, format); vsnprintf(buf, sizeof(buf) - 1, format, args); va_end(args); DBG("xmpp: net_printf: [%s]\n", buf); return net_send(fd, buf, strlen(buf)); } char *net_read_static(int fd) { static char buf[4096]; int res; res = recv(fd, buf, sizeof(buf) - 1, 0); if (res < 0) { LOG(L_ERR, "xmpp: recv() error: %s\n", strerror(errno)); return NULL; } if (!res) return NULL; buf[res] = 0; return buf; }

2 2

[Users] How to use OpenSER as Presence Server?
by akkala.naidu＠aricent.com 18 Jun '07

18 Jun '07

Hi OpenSER users, I have downloaded openSER source(1.2.x) and installed the same. It's working fine as SIP server. I would like to use openSER source as "Presence Server". Could you please let me know how to proceed? Do i need to add any module to openser source to make it work as presence server? Thanks and Regards, Akkala Naidu Paidi A R I C E N T 5th Floor, Sigma Block, Sigma Soft Tech Park, Bangalore - 69 Mobile: +91 9886645448 Office: +91 08041069295 *********************** Aricent-Private *********************** "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."

3 3

[Users] Presence Module and XCAP Issues
by Dave Waiting 18 Jun '07

18 Jun '07

Hi I'm trying to use the presence and presence_xml modules. I started with version 1.2.1 but kept on running into memory problems so I thought I would try the SVN version instead. Firstly I found two small mistakes in the MySQL table setup in the SVN: In the presentity table reveived_time should be received_time, and in the active_watchers table remove_cseq should be remote_cseq. After fixing this, the basic presence server seems to work although it seems to crash from time to time. My question is: does the presence_xml module work? It seems to crash openser whenever I try to use it for pres-rules (i.e. force_active = 0). If so could someone please send me a valid pres-rules document that is known to work with the module. Does this feature work with the presence module in 1.2.1 perhaps? Thanks Dave

2 1

[Users] ERROR: permissions: address_reload(): Database problem
by Kelvin Williams 18 Jun '07

18 Jun '07

My permissions module refuses to load due to a "database problem." OpenSER can access this database (as it does for other modules) and I have even went as far as defining the table in the module's parameters even though it is a default installation. Any help would be greatly appreciated. OpenSER version 1.2.1 with TLS Database: PostgreSQL Openser.cfg: loadmodule "permissions.so" modparam("permissions", "db_url", "postgres://<<snip>> ") modparam("permissions", "db_mode", 0) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "address_table", "address") modparam("permissions", "grp_col", "grp") modparam("permissions", "ip_addr_col", "ip_addr") modparam("permissions", "mask_col", "mask") modparam("permissions", "port_col", "port") modparam("permissions", "default_allow_file", "/usr/local/etc/openser/permissions.allow") modparam("permissions", "default_deny_file", "/usr/local/etc/openser/permissions.deny") Database: openser=> select * from address; id | grp | ip_addr | mask | port ----+-----+-------------+------+------ 1 | 1 | <removed> | 32 | 5060 openser.log: Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: permissions - initializing Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: Default allow file (/usr/local/etc/openser/permissions.allow) not found => empty rule set Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: Default deny file (/usr/local/etc/openser/permissions.deny) not found => empty rule set Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: ERROR: permissions: address_reload(): Database problem Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: permissions:init_addresses(): Reload of address table failed Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: Error while initializing allow_address function Jun 16 12:45:15 gaia /usr/local/sbin/openser[2871]: init_mod(): Error while initializing module permissions

3 4

[Users] Can't find MySQL Database Script
by Dave Waiting 18 Jun '07

18 Jun '07

Hi I'm using the SVN version (2363) and I can find the MySQL database structures but no script to insert them automatically. Do I need to insert the database structures manually? Regards Dave

2 2

[Serusers] Help me in config ser and sipxtapi!
by Phan Van Duc 18 Jun '07

18 Jun '07

I am using the sipXtapi library in a user agent. When running behind NAT (with STUN and rport enabled)and register with ser 0.9.6(basic configuration).It appears that the library detects the external address correctly and registered successful. But I see in the Register message, in Via and Contact field some strange things, hence when ser send Invite message for Calling, the user agent do not received Invite message because the port ser send Invite to user agent do not match with the port user agent listen to. 1. sipxtapi(sipxEzphone or CrossTalk): Received stun message from stun server (Vovida stun server): Attribute: MAPPED-ADDRESS Attribute Type: MAPPED-ADDRESS (0x0001) Port: 28766 IP: 222.255.15.252 (222.255.15.252) Send Register message to ser: Via: SIP/2.0/UDP 222.255.15.252:28766;branch=z9hG4bK-bdec6870a8f0;rport 2. Ser reply trying message: Via: SIP/2.0/UDP 222.255.15.252:28766 ;branch=z9hG4bK-bdec6870a8f0;rport=37171 Warning: 392 xxx.xxx.xxx.xxx:5060 "Noisy feedback tells: pid=29560 req_src_ip= 222.255.15.252 req_src_port=37171 in_uri=sip:xxx.xxx.xxx.xxx out_uri=sip: xxx.xxx.xxx.xxx via_cnt==1" 3. sipxtapi send Register message with Authorization: Via: SIP/2.0/UDP 222.255.15.252:37171;branch=z9hG4bK-16af3dfa110f;rport As above, ser will send Invite or Bye message to user agent in 222.255.15.252:37171 , of course user agent using sipxtapi can not receive these message. Can I make the change in ser config? plz help me. Thanks in advance, Phan Duc

2 1

[Users] XMPP module installation problem
by isetien001＠ikasle.ehu.es 18 Jun '07

18 Jun '07

Hi! I'm installing in my system the XMPP module. My Openser version is 1.2.1 My problem is that I don't have the file 'xmpp.so' in my system , eventhoug I do have the rest of xmpp files, and I don't know from where can I download it. Thank for your help, Izortze.

2 1

[Serusers] rtpproxy limit
by Nhadie 18 Jun '07

18 Jun '07

hi, is there a limit on the number of connections for rtpproxy? can it be increased? TIA regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

2 1

Re: [Serusers] Fwd: serctl help
by Jiri Kuthan 17 Jun '07

17 Jun '07

At 18:00 17/06/2007, Arun Kumar wrote: >Hi > >can any one please explain me what is the mean of this : > >serctl moni: > >UsrLoc Stats >Domain Registered Expired >'location' 311 3421 >'aliases' 109377 0 > > >what is 311 , 3421 , 109377, 0 ? It is numbers. These number specify number of registered contacts, number of times the registrations experied, and the same for contacts stored in the alias table. (110k permanent contacts, none of them, which is usual for alias, ever expired). -jiri >thanks > >arun > > > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] serctl help
by Arun Kumar 17 Jun '07

17 Jun '07

Hi can any one please explain me what is the mean of this : serctl moni: UsrLoc Stats Domain Registered Expired 'location' 311 3421 'aliases' 109377 0 what is 311 , 3421 , 109377, 0 ? thanks arun

1 1

[Serusers] Test call needed; won't take much time...
by Michael Grigoni 16 Jun '07

16 Jun '07

Greetings: I have set up an interactive remote controlled HF receiver on the 'Net which streams its audio output using RTP; currently it uses a SIP UA to receive connections. I need someone to dial in to its uri to confirm that external connections work and that they can hear the audio (I can confirm this only internally, on our LANs). Please call SIP:9202@cybertheque.org and report the results to me at msg _at_ cybertheque _dot_ org. Thanks much. Michael

1 0

[Serusers] HOWTO disable warning header in SIP HEADERS?
by Liu Wenlong 16 Jun '07

16 Jun '07

SER 2.0.0 rc1. Is it possible to disable warning header in SIP HEADERS ? howto change ser.cfg? thx a lot. -- aRES iN aNYWhere

1 0

[Users] IPV6 on Openser
by Jason Ma 16 Jun '07

16 Jun '07

Hi all, Does anybody tried to install Openser with IPV6 support?What package should I install for IPV6?The difference openser installation package or just install a module?Please advise,thanks a lot.!!

2 2

[Serusers] help!
by Mukesh Prajapati 16 Jun '07

16 Jun '07

hi all i am trying "auth-mysql.cfg" on SER for 2 user agent... can u tell me whc database tables i have to create in MySql and wht is the structure of it? thnks mukesh --------------------------------- No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started.

1 0

[Serusers] SER serctl
by Arun Kumar 16 Jun '07

16 Jun '07

Hi can any one please explain me what is the mean of this : serctl moni: UsrLoc Stats Domain Registered Expired 'location' 371 2012 'aliases' 109021 0 what is: 371 ? 2012 ? 109021 ? 0 ? thanks arun

1 0

[Serusers] How to check receive port in ser.cfg
by serusers＠jtoga.org 16 Jun '07

16 Jun '07

We have a 0.9.X setup that works fine and have set up the system to listen on multiple ports with the following listen=udp:xx.xx.xx.xx:5060 udp:xx.xx.xx.xx:5062 The problem is that when setting the "record route" we want to use the port that the message came in on rather than simply a static value... record_route_preset("xx.xx.xx.xx:5060;nat=yes"); Something like if (receive port == 5060) { record_route_preset("xx.xx.xx.xx:5060;nat=yes"); } else if (receive port ==5062) { record_route_preset("xx.xx.xx.xx:5062;nat=yes"); }; What can we check in ser.cfg? Thanks in advance.

1 0

[Serusers] Trying to connect an external user agent to my local network.
by Kirk McCalla 15 Jun '07

15 Jun '07

I am trying to conect an external user agent to my sip express router on my sip express router on my internal lan. I am not suure where to get started. I got my external Ip address and I am using a firewall. Does any one have any resources in helping me to get started. thanks.

1 0

[Serusers] Newbie question about multi-tenant and IVR/Asterisk Integration
by lists＠infoway.net 15 Jun '07

15 Jun '07

Hi all, I'm relatively new to SER. I've been using Asterisk for a few years and am now trying to figure out how to move to SER and/or SER/Asterisk architecture. We offer our clients (small offices) VoIP telephony services. As such, we offer them autoattendants, IVR, voicemail, and other services common to small businesses. In Asterisk, we play with contexts in order to allow Office A to have extensions 101 thru 105 and Office B to have extensions 101 thru 110, such that when Office A dials from 101 to 103, it only rings within the Office A "space" and restricts visibility among the different offices. So, the first question I have is how to achieve this in SER? Since the only protocol we deal with is SIP, we figured we could reduce our use of Asterisk to the extreme minimal and try to do as much as we can in SER. So, probably, we would end up with Asterisk for autoattendant, IVR, and possibly voicemail as well (depending on how we can use SEMS). Now, the second question I have is. When a call comes into an office and an autoattendant answers (which is basically sort of like an IVR script), we want SER to send the call to Asterisk for the IVR script to handle it. However, when the caller makes a selection, say they press 110 to dial extension 110, we want Asterisk to send the call back to SER and tell it to transfer the caller to extension 110 and then Asterisk will stay out of the way (media). Is this possible? Can anyone provide any pointers on how to achieve these issues in SER, SER/SEMS, SER/Asterisk, and/or SER/Asterisk/SEMS? Thanks

1 0

[Users] FW: Welcome to the "Users" mailing list
by Sharanagoud BD. 15 Jun '07

15 Jun '07

My mail id: sharanagoud_bd(a)spanservices.com Thanks, Sharanagoud. -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of users-request(a)openser.org Sent: Friday, June 15, 2007 7:37 PM To: Sharanagoud BD. Subject: Welcome to the "Users" mailing list Welcome to the Users(a)openser.org mailing list! To post to this list, send your email to: users(a)openser.org General information about the mailing list is at: http://openser.org/cgi-bin/mailman/listinfo/users If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: http://openser.org/cgi-bin/mailman/options/users/sharanagoud_bd%40spanse rvices.com You can also make such adjustments via email by sending a message to: Users-request(a)openser.org with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. It is: span1234 Normally, Mailman will remind you of your openser.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you.

1 0

[Users] MediaProxy and SDP Multipart
by Edson 15 Jun '07

15 Jun '07

Hi... We are trying to use a Cisco 2600 as our IPIP-GW between our SIP and H323 networks. Until a week or so the comunications were working so-so, but from a week it stops completely. Digging on the problem, I found MediaProxy messages informing that it couldn't handle the SDP informations, that SDP was illegal... Looking on Google I finded that this behavior was reported as a know limitation of MediaProxy and NAThelper modules (http://lists.iptel.org/pipermail/serusers/2006-June/028981.html). Aren't this limitations resolved on Mediaproxy 1.8.2? What are our best choises? Maybe migrating to Yate? Thanks for any thoughts... Edson

1 0

[Serusers] Help!
by Mukesh Prajapati 15 Jun '07

15 Jun '07

Hi all Where can i find rpm for MySql support for SER? I am using Fedora Core 4 Thanks Mukesh --------------------------------- Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us.

2 1

[Serusers] SER error
by Arun Kumar 15 Jun '07

15 Jun '07

Hi My ser is running fine but some time I see this prob: Jun 14 17:38:10 sip ser[8402]: ERROR: sip_msg_cloner: cannot allocate memory Jun 14 17:38:10 sip ser[8402]: ERROR: new_t: out of mem: Jun 14 17:38:10 sip ser[8402]: ERROR: t_newtran: new_t failed Jun 14 17:38:10 sip ser[8402]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) Jun 14 17:38:10 sip ser[8404]: Warning: sl_send_reply: I won't send a reply for ACK!! Jun 14 17:38:13 sip ser[8403]: ERROR: sip_msg_cloner: cannot allocate memory Jun 14 17:38:13 sip ser[8403]: ERROR: new_t: out of mem: Jun 14 17:38:13 sip ser[8403]: ERROR: t_newtran: new_t failed Jun 14 17:38:13 sip ser[8403]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) Jun 14 17:38:13 sip ser[8403]: Warning: sl_send_reply: I won't send a reply for ACK!! Jun 14 17:38:14 sip ser[8404]: ERROR: sip_msg_cloner: cannot allocate memory Jun 14 17:38:14 sip ser[8404]: ERROR: new_t: out of mem: Jun 14 17:38:14 sip ser[8404]: ERROR: t_newtran: new_t failed Jun 14 17:38:14 sip ser[8404]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) Jun 14 17:38:15 sip ser[8405]: ERROR: sip_msg_cloner: cannot allocate memory Jun 14 17:38:15 sip ser[8405]: ERROR: new_t: out of mem: Jun 14 17:38:15 sip ser[8405]: ERROR: t_newtran: new_t failed please help with this issue. thanks arun

2 2

[Users] Permissions Module - Table Version
by Kelvin Williams 15 Jun '07

15 Jun '07

My new OpenSER server will not load the permissions module. I built this box from source downloaded from the openser.org site three days ago (openser-1.2.1-tls_src.tar.gz), and populated my PostgreSQL database with the scripts/postgresqldb.sh script included with the source. I'm setting up permissions.so like: loadmodule "permissions.so" modparam("permissions", "db_url", "postgres://<<snip>>") modparam("permissions", "db_mode", 0) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "ip_addr_col", "src_ip") modparam("permissions", "default_allow_file", "/usr/local/etc/openser/permissions.allow") modparam("permissions", "default_deny_file", "/usr/local/etc/openser/permissions.deny") When I attempt to start openser with the permissions module, I receive the following in the log: Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: permissions - initializing Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: Default allow file (/usr/local/etc/openser/permissions.allow) not found => empty rule set Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: Default deny file (/usr/local/etc/openser/permissions.deny) not found => empty rule set Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: permissions:init_addresses(): Invalid table version 2 - expected 3 Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: Error while initializing allow_address function Jun 14 19:13:21 gaia /usr/local/sbin/openser[21948]: init_mod(): Error while initializing module permissions I have verified the table is in the database: openser=# select * from trusted; id | src_ip | proto | from_pattern | tag ----+--------+-------+--------------+----- (0 rows) I was instructed to increment the version of the table in the database, and I did using the information from the log (changing the version to 3) and still received the same error. The version table had the following for trusted when it was installed (from script): openser=# select * from version where table_name = 'trusted'; table_name | table_version ------------+--------------- trusted | 4 (1 row) Any light that someone could shed on this for me would be greatly appreciated. Many thanks, Kw

3 2

[Serusers] Call waiting and accounting
by inge 15 Jun '07

15 Jun '07

Hi all, I've got a problem with call waiting function. This one allow us to hang out a call when we are already in communication. But when I press "R" on my phone to take the second call, there is one INVITE and one ACK generated by the proxy and being accounted in MySQL. It's the same when I switch between both callers. So I can have for the same callid 2 3 4...X INVITE ACK and one BYE. So in SERWeb for example, I can see for one call 3 lines of accounting. Thanks for you support. Adrien .L

3 11

[Users] recomended setup to handle more calls and best performance.
by ram 15 Jun '07

15 Jun '07

Hi Iam looking some suggestion here after reading some thread some time back people are recomending to use rtpproxy in other PC to achive more calls P4d with 2GB ram, IDE 160GB, 3 Gigabit Ethernet ( only openser) Xeon with 2GB RAM, SCCI hdd / 2 Giga Ethernet ( mysql, radius,cdrtools, frontend /asterisk for voice mail and b2bua) P4 with 2GB RAM IDE 16GB/ 2 Gigabit Ethernet ( only for rtpproxy) openser server connected with other server with cross cable. one ethernet is connected to internet with this setup can i able to achive 1000cals per second. what is the recomendations here. any suggestions ram

3 7

[Serusers] Server Internal Error
by Arun Kumar 14 Jun '07

14 Jun '07

Hi I've configured my ser and serdb on separate machines in my local lan. It was working fine without any problem from many months but suddenly from last one week after some time I'm getting 500 server internal error very frequently. please advise. thanks arun

1 0

Re: [Users] error in openser.cfg
by isetien001＠ikasle.ehu.es 14 Jun '07

14 Jun '07

Hello! Sorry, I thought that I had added the code to the email. Anyway, I think that the problem must be somewhere elser because If I comment that line I gey the error in the commented line. What I want to do is make GTALK work whit Openser, that's why I have added xmpp module. This is my openser.cfg file: # # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes # check_via=no rev_dns=no dns=no port=5060 #fifo='/tmp/openser_fifo' # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "xmpp.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "auth.so" #loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #-- xmpp module parameters -- modparam("xmpp","domain_separator","*") modparam("xmpp","gateway_domain","b001948.bi.ehu.es") modparam("xmpp","xmpp_domain","b001948.bi.ehu.es") modparam("xmpp","xmpp_password","ormazabal") modparam("xmpp","xmpp_host","xmpp.openser.org") modparam("xmpp","backend","component") #modparam("xmmp","xmpp_port","5347"); # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # filter XMPP destinations if (uri =~ "sip:.+@sip-xmpp\.openser\.org") { # absorb retransmissions if (!t_newtran()) { sl_reply_error(); exit; } # handle IM if (is_method("MESSAGE")) { log("message to XMPP: from <$fu> to <$ru>\n"); if (xmpp_send_message()) { sl_send_reply("202", "Accepted"); } else { sl_send_reply("404", "Not found"); } exit; } # unsupported type of SIP message log(message to XMPP: method <$rm> not supported yet\n"); sl_send_reply("503", "Service unavailable"); exit; } else { # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize ("openser.org", "subscriber")) { # www_challenge ("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); }; } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } > On Donnerstag, 14. Juni 2007, isetien001(a)ikasle.ehu.es wrote: > > Hi! > > > > I have added xmpp module to my system and change my config file > > operser.cfg and now I get an error that I can´t resolve, I don't > > really know which is the problem. > > > > If anyone can have a look at it, I would be very pleased. > > > > Thanks a lot, > > > > Izortze. > > > > #:/usr/local/etc/openser# openser -f openser.cfg > > 0(25922) parse error (141,2-3): syntax error > > 0(25922) ERROR: cfg. parser: unexpected EOF in unclosed string > > ERROR: bad config file (1 errors) > > Hello Izortze, > > the error should be located in line 141 of your config. Your mail programm > wrapped probably some lines, whats the content of this line in your > installation? > > Henning > >

2 1

[Users] error in openser.cfg
by isetien001＠ikasle.ehu.es 14 Jun '07

14 Jun '07

Hi! I have added xmpp module to my system and change my config file operser.cfg and now I get an error that I can´t resolve, I don't really know which is the problem. If anyone can have a look at it, I would be very pleased. Thanks a lot, Izortze. #:/usr/local/etc/openser# openser -f openser.cfg 0(25922) parse error (141,2-3): syntax error 0(25922) ERROR: cfg. parser: unexpected EOF in unclosed string ERROR: bad config file (1 errors) 0(25922) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not allocated -> nothing to destroy # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes # check_via=no rev_dns=no dns=no port=5060 #fifo='/tmp/openser_fifo' # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "xmpp.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #-- xmpp module parameters -- modparam("xmpp","domain_separator","*") modparam("xmpp","gateway_domain","sip-xmpp.openser.org") modparam("xmpp","xmpp_domain","xmpp-sip.openser.org") modparam("xmpp","xmpp_password","ormazabal") modparam("xmpp","xmpp_host","xmpp.openser.org") modparam("xmpp","backend","component") #modparam("xmm","xmpp_port","5347") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if(uri=~"sip:.+@sip-xmpp\.openser\.org"){ #absorb retransmisions if(!t_newtran()){ sl_reply_error(); return; } #handle IM if(method == "MESSAGE"){ log("*** xmpp-handled MESSAGE message.\n"); if(xmpp_send_message()){ t_reply("200","Accepted"); }else { t_reply("404","Not found); } return; } #unsupported type of SIP message log("*** xmpp unhandled message type.\n"); t_reply("503", "Service unavailable"); return; } else { # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize ("openser.org", "subscriber")) { # www_challenge ("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

2 1

[Serusers] Technical Board results
by Greger V. Teigre 14 Jun '07

14 Jun '07

The voting on technical board members is now closed. The votes have been counted: Raphael Coeffic: 7 votes Stefan Sayer: 8 votes Jan Janak: 13 votes Andrei Pelinescu-Onciul: 13 votes N. (Arcdiv.com): 1 vote Martin Hoffmann: 7 votes Greger Viken Teigre: 14 votes Hendrik Scholz: 5 votes The confirmed members of the technical board for the term starting June 15, 2007 and ending May 31, 2009 are: Jan Janak, Andrei Pelinescu-Onciul, Greger Viken Teigre, and Stefan Sayer. We have a tie between Raphael Coeffic and Martin Hoffmann on 7 votes each. We don't really have described the rules for how to handle a tie. Any suggestions? g-)

4 5

[Serusers] Missing values on mising calls
by Riccardo Cupardo 14 Jun '07

14 Jun '07

1 0

[Serusers] Please reply!!
by Meidiana Ten 14 Jun '07

14 Jun '07

Hello, I'm facing some error when trying to configure dynamic imap url in my ser.cfg I've got stuck in avpops module. below is my configuration: avp_write("imap://$to:vmailuser@pcr.ac.id:143/INBOX", "$mailbox_url"); but when I saw the debug of SEMS, the P-Mailbox-URL just recognize the "$to" as string. How to manipulate the line to get the destination uri? The other problem shown in the debugs are: (4979) ERROR: Ivr-Python: ********** Ivr-Python exception report **************** (4979) ERROR: Ivr-Python: <type 'exceptions.TypeError'> raised: descriptor '__init__' requires a 'exceptions.Exception' object but received a 'str' (4979) ERROR: Ivr-Python: File '/usr/local/lib/sems/ivr/imap_mailbox/MailboxURL.py': line 9 (4979) ERROR: Ivr-Python: , line 33 (4979) ERROR: Ivr-Python: , line 27 (4979) ERROR: Ivr-Python: File './imap_mailbox/imap4ext.py': line 122 (4979) ERROR: Ivr-Python: File '/usr/local/lib/sems/ivr/mailbox.py': line 19 (4979) ERROR: Ivr-Python: ********** end of Ivr-Python exception report ********* I leave the following line like the original in MailboxURL.py url = "" user = "" passwd = "" host = "" port = 0 path = "" Please tell me what to configure to get the mailbox/mailbox_query run. Really hope the answer. Thanx before. GBU Regards, Meidiana --------------------------------- Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.

1 0

[Users] error in openser.cfg
by isetien001＠ikasle.ehu.es 14 Jun '07

14 Jun '07

Hi! I have added xmpp module to my system and change my config file operser.cfg and now I get an error that I can´t resolve, I don't really know which is the problem. If anyone can have a look at it, I would be very pleased. Thanks a lot, Izortze. #:/usr/local/etc/openser# openser -f openser.cfg 0(25922) parse error (141,2-3): syntax error 0(25922) ERROR: cfg. parser: unexpected EOF in unclosed string ERROR: bad config file (1 errors) 0(25922) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not allocated -> nothing to destroy # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes # check_via=no rev_dns=no dns=no port=5060 #fifo='/tmp/openser_fifo' # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "xmpp.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #-- xmpp module parameters -- modparam("xmpp","domain_separator","*") modparam("xmpp","gateway_domain","sip-xmpp.openser.org") modparam("xmpp","xmpp_domain","xmpp-sip.openser.org") modparam("xmpp","xmpp_password","ormazabal") modparam("xmpp","xmpp_host","xmpp.openser.org") modparam("xmpp","backend","component") #modparam("xmm","xmpp_port","5347") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if(uri=~"sip:.+@sip-xmpp\.openser\.org"){ #absorb retransmisions if(!t_newtran()){ sl_reply_error(); return; } #handle IM if(method == "MESSAGE"){ log("*** xmpp-handled MESSAGE message.\n"); if(xmpp_send_message()){ t_reply("200","Accepted"); }else { t_reply("404","Not found); } return; } #unsupported type of SIP message log("*** xmpp unhandled message type.\n"); t_reply("503", "Service unavailable"); return; } else { # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize ("openser.org", "subscriber")) { # www_challenge ("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

1 0

Re: [Serusers] ser mysql issue on RedHat
by samuel 14 Jun '07

14 Jun '07

Good to hear it works!! Samuel. 2007/6/13, flavio <flavio.patria(a)gmail.com>: > > I've found this in ser configuration howto: > > DBHOST=localhost > USERNAME=ser > DEFAULT_PW=heslo > ROUSER=serro > RO_PW=47serro11 > SQL_USER="root" > DEFAULT_PW=heslo > > I've tryed following samuel suggestion and all works fine!! > > Thanks a lot, > > Flavio > > 2007/6/13, flavio <flavio.patria(a)gmail.com>: > > What are passwords for users 'ser' and 'serro'? So I'll try... > > > > Thanks, > > > > Fla > > > > > > 2007/6/13, samuel <samu60(a)gmail.com>: > > > Have you really updated the passwords for ser user?? > > > mysql> UPDATE mysql.user SET Password = OLD_PASSWORD('newpwd > > > ') > > > -> WHERE Host = 'some_host' AND User = 'some_user'; > > > > > > mysql> FLUSH PRIVILEGES; > > > > > > I faced this problem and I solved it using OLD_PASSWORD.... > > > > > > samuel. > > > 2007/6/13, flavio < flavio.patria(a)gmail.com>: > > > > > > > > Hi to All, > > > > I've successfull installed ser with mysql support on my RedHat > Server. > > > > When I try to start ser I've the follow error message: > > > > > > > > 0(0) new_connection(): Client does not support authentication > protocol > > > > requested by server; consider upgrading MySQL client* > > > > > > > > I have follow the suggestion posted in the list, as: > > > > > > > > > *root at ubuntu:/usr/local/sbin # 0(0) new_connection(): Client > does > > > not > > > > > support authentication protocol requested by server; consider > upgrading > > > > > MySQL client* > > > > > > > > > > > > > http://dev.mysql.com/doc/refman/5.0/en/old-client.html > > > > > > > > But error remains. Any suggestions about?? > > > > > > > > ps Yes, on my slackware test pc, following that no problems was > found!! > > > > > > > > > > > > - > > > > ******************************** > > > > * (o< ing. Patria Flavio > > > > * //\ phone 0823451358 > > > > * V_/_ mobile 3407873357 > > > > * > > > > ******************************** > > > > _______________________________________________ > > > > Serusers mailing list > > > > Serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > -- > > ******************************** > > * (o< ing. Patria Flavio > > * //\ phone 0823451358 > > * V_/_ mobile 3407873357 > > * > > ******************************** > > > > > -- > ******************************** > * (o< ing. Patria Flavio > * //\ phone 0823451358 > * V_/_ mobile 3407873357 > * > ******************************** >

1 0

Fwd: Re: Re: [Users] 200OK Contact header field.
by Maciek Kowalski 14 Jun '07

14 Jun '07

It seems that I solved the problem by using record_route_preset("my.domain.net"); Now the message flow is correct. I don't know why does it make a difference if I use the domain name (which will be resolved to public ip address) or the actual ip address. Every suggestion will be appreciated. Best regards, Maciej Kowalski ---- Wiadomość Oryginalna ---- Od: Maciek Kowalski <macius_13(a)o2.pl> Do: users(a)openser.org Data: 13 czerwca 2007 13:33 Temat: Re: Re: [Users] 200OK Contact header field. > Thanks for a quick response. > I'm sorry but I've messed up a little bit. > I've got 2 asterisks and the one I've mentioned is on the same box as Openser.(Openser 192.168.1.2:5060, Asterisk 192.168.1.2:5065) > Openser acually "record_route" the Invite but it puts there his private address (192.168.1.2). I presume that's why the user behind different NAT cannot reach it. > I've tried record_route_preset(""); with public IP of NAT where openser is, and in that configuration, ACK reaches Openser but it loops and is not forwarded to 192.168.1.2:5065 (Asterisk).RURI in this ACK is "sth@192.168.1.2:5065", and Openser listens on port 5060 so I dont understand why it behaves this way. > > What do You suggest? > > Thanks in advance and sorry once more for this mess.I hope what I write is still clear. > > ---- Wiadomość Oryginalna ---- > Od: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Do: Maciek Kowalski <macius_13(a)o2.pl> > Kopia do: users(a)openser.org > Data: 13 czerwca 2007 13:11 > Temat: Re: [Users] 200OK Contact header field. > > > You are right. If record_route is used the ACK should be sent to openser > > first. Thus, inspect the 200 ok received by the client if the record > > route header present, and inspect the ACK sent from the client if a > > Route header with the content of the record_route header is present. > > > > btw: which client do you use? There are dozens of buggy sip clients out > > there. > > > > regards > > klaus > > > > Maciek Kowalski wrote: > > > Hello All, > > > > > > I have a problem with transactions rewrited to asterisk. > > > In my configuration asterisk and openser are behind NAT on a Local Network.(Openser- 192.168.1.2, Asterisk 192.168.1.5) > > > When a User who is behind different NAT(different LAN) sends an Invite which is then rewrited to Asterisk with (rewritehostport("192.168.1.5:5060");) everything works great till asterisk answers with 200OK. In this message the Contact header field is set to "192.168.1.5:5060". When user recieves this 200OK it sends ACK to IPaddress 192.168.1.5 (and since he is behind different NAT..the message goes nowhere). > > > Since the Initial Invite in this transaction is "record_routed" by Openser I thought that the ACK should first go through Openser. > > > Please corect me if Im wrong, and if possible, suggest some solution. > > > > > > Best Regards, > > > > > > Maciej Kowalski > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)openser.org > > > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

2 2

[Users] openser 1.2 migration questions
by zm23 13 Jun '07

13 Jun '07

7 30

[Users] openser sending 408 to UAC when not receiving 200 from UAS after 4 secs
by Tim Madorma 13 Jun '07

13 Jun '07

Hi, For a basic call, when the UAS does not send a 200 within approx 4 seconds, the OpenSER has a timer fire and sends a 408 to the UAC and a Cancel to the UAS. This only allows one ring on the terminating phone before the call is dropped.. I'm attaching the log and Wireshark/snoop capture file. I'll put the openser config file inline here. Please advise: # # openser_vm.cfg # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) maxbuffer=1048576 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #reply_to_via=1 children=32 log_facility=LOG_LOCAL5 dns_use_search_list=no dns_servers_no=1 user="sipproxy" group="sipproxy" # Local IP address/port pairs to listen to # Set the following IP addresses to the value of the local e1000g0 interface listen=udp:65.185.233.55:5061 listen=udp:65.185.233.55:5062 # Alias IP address/port pair values will be in the Req URI when the # OpenSER is being load balanced with a BIG IP server # Set the IP address to the value of the associated blade # of the BIG IP that is load balancing for the SIP Proxy server. alias=65.185.233.104:5061 alias=65.185.233.104:5062 # LOAD OpenSER MODULES mpath="/sw/lib/openser/modules/" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "acc.so" loadmodule "mi_fifo.so" loadmodule "enum.so" loadmodule "perl.so" loadmodule "xlog.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- modparam("acc", "log_level", 2) modparam("acc", "log_flag", 1) modparam("acc","report_cancels", 1) modparam("acc","failed_transaction_flag", 1) modparam("acc","log_extra", "req_uri=$rU") modparam("tm", "fr_timer", 2) modparam("tm","fr_inv_timer",4) modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("perl", "filename", "/sw/lib/openser/perl/openser_twc_sip_proxy_3.0.pl") # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { route(1); }; if (method=="OPTIONS") { sl_send_reply("200", "OK"); exit; } ############################################################## # TWC: dst_port 5062 indicates Message Waiting Indicator ############################################################## if (dst_port==5062 && method=="NOTIFY") { xlog("L_DBG", "TWC: received incoming message:\n <$mb>\n"); perl_exec("twc_proc_vm_mwi"); if ($rc==-1) { log("TWC: COULD NOT PARSE THE MWI TRIGGER"); sl_send_reply("400", "Bad Request"); exit; } # The enum_query() call will form an ENUM (NAPTR DNS) request from # the user part of the Req URI and the passed MWI server and send # it to the ENUM server defined in resolv.conf. enum_query("mwi.ex.e164.rr.com"); if ($rc==1) { log("MWI ENUM QUERY SUCCEEDED"); setflag(1); route(1); } else { log("MWI ENUM QUERY FAILED"); sl_send_reply("404", "Not Found"); exit; } } ############################################################## # TWC: dst_port 5061 indicates VM Outbound dial trigger ############################################################## if (dst_port==5061 && method=="INVITE") { xlog("L_DBG", "TWC: received incoming message:\n <$mb>\n"); perl_exec("twc_proc_vm_outdial"); if ($rc==-1) { log("TWC: COULD NOT PARSE THE VM OUTDIAL TRIGGER"); sl_send_reply("400", "Bad Request"); exit; } # The enum_query() call will form an ENUM (NAPTR DNS) request from # the user part of the Req URI and the passed VMO server and send # it to the ENUM server defined in resolv.conf. enum_query("vmo.ex.e164.rr.com"); if ($rc==1) { log("VMO ENUM QUERY SUCCEEDED"); setflag(1); # Use pseudo vars to set REQ URI User to the original Req URI User $rU = $oU; route(1); } else { log("ENUM QUERY FAILED"); sl_send_reply("404", "Not Found"); exit; } } } ##################################################### # Default Message Handler ##################################################### route[1] { # Send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

2 2

[Serusers] ser mysql issue on RedHat
by flavio 13 Jun '07

13 Jun '07

Hi to All, I've successfull installed ser with mysql support on my RedHat Server. When I try to start ser I've the follow error message: 0(0) new_connection(): Client does not support authentication protocol requested by server; consider upgrading MySQL client* I have follow the suggestion posted in the list, as: > *root at ubuntu:/usr/local/sbin # 0(0) new_connection(): Client does not > support authentication protocol requested by server; consider upgrading > MySQL client* > http://dev.mysql.com/doc/refman/5.0/en/old-client.html But error remains. Any suggestions about?? ps Yes, on my slackware test pc, following that no problems was found!! - ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

2 2

Re: [Serusers] ser osp module with a peering server
by Dmitry Isakbayev 13 Jun '07

13 Jun '07

Hi Julia, Please send output generated by enroll.sh osptestserver.transnexus.com Regards, Dmitry > hi, > has somebody tried to enroll ser osp module with a peering server? I use > this howto > (http://sourceforge.net/docman/display_doc.php?docid=43221&group_id=187299) but > I cannot find the three required crypto files (localcert.pem, pkey.pem and > cacert_#.pem). I hope somebody can help me! I use ser in version 0.9.6. > Kind regards, > Julia

1 0

[Users] 200OK Contact header field.
by Maciek Kowalski 13 Jun '07

13 Jun '07

Hello All, I have a problem with transactions rewrited to asterisk. In my configuration asterisk and openser are behind NAT on a Local Network.(Openser- 192.168.1.2, Asterisk 192.168.1.5) When a User who is behind different NAT(different LAN) sends an Invite which is then rewrited to Asterisk with (rewritehostport("192.168.1.5:5060");) everything works great till asterisk answers with 200OK. In this message the Contact header field is set to "192.168.1.5:5060". When user recieves this 200OK it sends ACK to IPaddress 192.168.1.5 (and since he is behind different NAT..the message goes nowhere). Since the Initial Invite in this transaction is "record_routed" by Openser I thought that the ACK should first go through Openser. Please corect me if Im wrong, and if possible, suggest some solution. Best Regards, Maciej Kowalski

2 2

[Users] SIP Server running but no messages on stdout.
by akkala.naidu＠aricent.com 13 Jun '07

13 Jun '07

2 1

[Serusers] Buddy Lists
by KUMAR 13 Jun '07

13 Jun '07

Hi all, I am using SER-2.0 rc1, and I want to store the buddy Lists on the server so that the users can access their buddy lists from any place. As far as I can understand, this can be done using XCAP server, but I cannot find any free XCAP server. Is there any other way to do this ? Or is there a free XCAP server ? Please help me out. Thank you kumar

3 4

[Serusers] Ser + Windows NAT
by Thomas Britis 13 Jun '07

13 Jun '07

Hi all, I'm getting a problem when a user behind a windows gateway (NATed client) connects to my ser box. I think this was already discussed here but I didn't find anything on the logs. The problem is with the '407 Proxy Authentication Required' signal that never reaches the client. Here is the scenario: 1- The user sends the INVITE from a higher port to the SIP server. It looks like this: User:63040 -> SER:5060 2- SER responds with a 407 Proxy Authentication Required on the client's local sip port: SER:5060 -> User:5060 At this point, I think windows drops the package because it don't refer to any entry at the NAT table, but I'm not sure about that. I want to know if there's a solution to this 'problem'. Thank you all. -- Thomas Storino Britis TCNet Informatica e Telecomunicacoes LTDA

3 2

[Users] openser radiator radius accounting packets are missing
by Russell Williams 13 Jun '07

13 Jun '07

This is a packet dump from radiator.. Where are the attributes to identify the caller , and the callee. The information I need is timestamp which is here . callingstationid calledstationid originatingip and destinationip Any suggestions on how to get them to show up here . BTW the stop record is as lacking in info as this start record. Attributes: Acct-Status-Type = Start Service-Type = Sip-Session Sip-Response-Code = 200 Sip-Method = Invite Event-Timestamp = 1181607270 Sip-From-Tag = "EELf2-pTUK4" Sip-To-Tag = "N78f2-UF9FM0" Acct-Session-Id = "0PkXg-tEbc4f2(a)207.158.49.3" NAS-IP-Address = 207.158.49.3 NAS-Port-Id = 5060 Acct-Delay-Time = 0 Mon Jun 11 17:15:53 2007: DEBUG: Handling request with Handler 'NAS-IP-Address=xx.xx.xx.xx Thank you Russell Williams

3 2

Re: [Users] Accounting Bye packet Issue
by vallimamod abdullah 13 Jun '07

13 Jun '07

Hi Dan, > From: "Dan" <fiedler.dan(a)gmail.com> > To: <users(a)openser.org> > Date: Wed, 13 Jun 2007 11:45:41 +0530 > Subject: [Users] Accounting Bye packet Issue > > I am facing a peculiar issue with accounting. BYE packets are getting rejected > with error message: 478 Unresolvable destination. >From your logs, I see: U 59.176.78.110:50496 -> 210.68.65.78:5060 BYE sip:210.68.65.78 SIP/2.0. Route: <sip:@209.67.171.10;transport=udp> ^^^^ The bye packet is broken as you don't have the username part on the Route header uri. > This happens only in case I use ATA for calling and with some gateways only. > With the same gateway if I call using xlite, accounting works fine. I am > unable to find out the reason. I haven't worked with these phones but it seems to me that they are doing strict routing like some pre-rfc3261 devices. In "normal" case, the first line would have looked like: BYE sip:user@210.68.65.78 SIP/2.0 without the route header. Hope this will help. -- Regards, vma .

1 0

[Users] Accounting Bye packet Issue
by Dan 13 Jun '07

13 Jun '07

Hi, I am facing a peculiar issue with accounting. BYE packets are getting rejected with error message: 478 Unresolvable destination. This happens only in case I use ATA for calling and with some gateways only. With the same gateway if I call using xlite, accounting works fine. I am unable to find out the reason. Can someone help on this? I am attaching the log when I am calling from a ATA and BYE is being rejected by openser. Regards Dan

2 1

[Users] rtp relay & transcoding
by Ryan Mitchell 13 Jun '07

13 Jun '07

Regarding RTP relay (e.g. media proxy), and transcoding -- This topic has come up many times before in various forms, but I still have not found any obvious solution that's highly scalable and cheap (well sure, I can dream). We have lots of customers behind various firewalls using various codecs. Customers call each other (both parties behind firewall) and to/from carriers. Certainly this is a common use-case. What do you do? What are best known practices? Commercial media gateway, or open-source solutions? We use both OpenSER and a custom B2BUA written against the NIST Java stack. We need a way to transcode when needed. Obviosly mediaproxy module is great, but doesn't transcode. Ideally, what I'm looking for: * at the point where our system determines that transcoding or rtp relay is needed, a media gateway is chosen based on network proximity (e.g.: 1/2 our customers are in the U.S., 1/2 in Brazil; should pick a media gateway accordingly to minimize network path). * our system then signals the media gateway (mgcp?) to setup the channels, and modifies the SDPs in the SIP path accordingly. * even more ideally: the media gateway signals our system with inband or rfc2833 dtmf events, plus rtcp reports when available. I think Asterisk could be hacked to do this. Does anyone know of a commercial product that's not too expensive? Thoughts? Advice? thanks, -- Ryan Mitchell <rjm(a)tcl.net> Telecom Logic, LLC http://www.tcl.net

2 3

[Users] Question about openser with sip trunks
by jamespev 13 Jun '07

13 Jun '07

1 0

[Serusers] error when compiling SER 2.0 rc1
by James Beatson 12 Jun '07

12 Jun '07

Can someone explain the cause for the following compile error when trying to compile SER 2.0 [root@localhost ser-2.0.0-rc1]# make group_include-"standard" all make: *** Warning: File `Makefile.rules' has modification time in the future (2006-09-29 03:52:24 > 2006-06-11 21:31:35.613769) bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex make: *** Warning: File `Makefile.rules' has modification time in the future (2006-09-29 03:52:24 > 2006-06-11 21:31:39.786688) bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex > > [root@localhost ser-2.0.0-rc1]# James Beatson Camiant 781-264-2297 www.camiant.com <blocked::http://www.camiant.com/>

2 3

[Users] inner join using OpenSer database API
by Tiberius DULUMAN 12 Jun '07

12 Jun '07

Hello, I need to write an OpenSER module that should persist it's data in a database and sometimes access it from there. After reading the Database API of OpenSer documentation, I've start the implementation, but soon I've got one major problem: I can't see any way to select data by joining more tables. Is it possible to do this? dbf.query callback seems to work only with the current table from db_con_t structure. Thanks _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

[Serusers] need help!
by Mukesh Prajapati 12 Jun '07

12 Jun '07

hi as per my earlier mail regarding problem with my-sql support on SER.... here is the error msg i m getting: root@students-desktop:/etc/ser# ser 0(6762) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open shared object file: No such file or directory 0(6762) parse error (15,13-14): failed to load module ERROR: bad config file (1 errors) here is my config "ser.cfg" file (whc is same as "auth-mysql.cfg" provided on website) ===================== # $Id: auth-mysql.cfg 46 2006-01-25 04:21:30Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=3 fork=no log_stderror=yes listen=192.0.2.13 # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- if (!t_relay()) { sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } ========================= --------------------------------- You snooze, you lose. Get messages ASAP with AutoCheck in the all-new Yahoo! Mail Beta.

2 1

[Serusers] ser osp module with a peering server
by julia heller 12 Jun '07

12 Jun '07

hi, has somebody tried to enroll ser osp module with a peering server? I use this howto (http://sourceforge.net/docman/display_doc.php?docid=43221&group_id=187299) but I cannot find the three required crypto files (localcert.pem, pkey.pem and cacert_#.pem). I hope somebody can help me! I use ser in version 0.9.6. Kind regards, Julia -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail

2 2

[Users] gateway redirect
by Joao Pereira 12 Jun '07

12 Jun '07

Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work. In the moment Im just using rewritehost("....."); The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work? Thanks Joao Pereira -- ______________________________________________ João Gomes Pereira FCCN Av. do Brasil, nº 101 1700-066 Lisboa tel: +351 218 440 100 - fax: +351 218 472 167 email|SIP: joao.pereira(a)fccn.pt http://www.fccn.pt ______________________________________________ ---

2 5

[Users] openser and SEMS
by Helmut Kuper 12 Jun '07

12 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I changed a few modules (groups, ringtone, voicebox, ...) of openser and sems to my needs. Maybe the changes are of interest for you. So what's the official way to send the modifications back to openser and sems ? regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGblo+4tZeNddg3dwRAt7eAJ48RKKYuF0pxaG6atZAO2rbYXkbygCeIGDr YiEWSevCPxfZoWUYWVXN0dY= =aWGn -----END PGP SIGNATURE-----

3 2

[Users] Re: Memory issues
by Papadopoulos Georgios 12 Jun '07

12 Jun '07

Hello, We have exactly the same problem. Openser after a few hours starts loging "out of memory" errors and soon after that it cannot process any messages. I am using 1.2 branch from SVN and the last export that I got was at the begining of June, the revision number was 2333. Today I was able to catch the problem while it is happening and I did a memory dump on the process that run out of memory (process 4197). ps shows that this process is a receiver with id=1 and child=0. I have not restarted the server yet, but pretty soon I will have to restart because more processes will run out of memory. If there is some additional information (statistics, ngrep etc) that I could gather while the server is still running, please let me know. I don't have quick access to a public ftp site, so if someone can take a look at the log file and the memory dump, please let me know and I will email it (1MB). thank you for any help. George Date: Mon, 11 Jun 2007 17:52:08 +0200 From: Klaus Darilion <klaus.mailinglists(a)pernau.at> Subject: Re: [Users] Memory issues To: Christian <mailing-lists(a)switzernet.com> Cc: users(a)openser.org Message-ID: <466D6FA8.9010201(a)pernau.at> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Christian wrote: > Thank you Bogdan, > > For the moment I am not very sure to switch to SVN branch (this is a > production server, so every minor bug can be dramatic) SVN != unstable SVN is the code repository. In the repository there are different branches. E.g. there is 1.1: openser 1.1 branch 1.2: openser 1.2 branch trunk: openser development branch Thus, you should update to the 1.2 branch from SVN. This is the currents table release with all bugfixes: > But I will at least upgrade to 1.2.1 asap, and see if the issue gets > solved. 1.2.1 is a snapshot taken from 1.2 branch regards klaus > The main issue here is that the memory leak doesn't crash openser, but > puts it in a state where messages are accepted but not relayed. > Shouldn't it rather send a SIP error reply (500 I guess), so that > handover on other servers gets properly handled? > > Regards, > Christian > > > > Bogdan-Andrei Iancu a ιcrit : >> it looks like PKG memory problem. >> Christian, try to update to the latest 1.2 version from SVN and see >> if the problem disappears - there were some pkg mem leak fixed >> since the 1.2 release. >> >> regards, >> bogdan >> >> >> Klaus Darilion wrote: >>> http://www.openser.org/dokuwiki/doku.php/troubleshooting:memory <http://www.openser.org/dokuwiki/doku.php/troubleshooting:memory> >>> >>> Make sure to use newest 1.2 (make a SVN checkout of /branches/1.2/ ) >>> >>> regards >>> klaus >>> >>> Christian wrote: >>>> Hi All, >>>> >>>> I have a recurrent memory problem with openser 1.2.0. In this case >>>> it only acts as a SIP router. No registration, accounting etc. and >>>> only approx. 20 simultaneous calls. >>>> >>>> Here is the problem: everything works fine (calls from/to PSTN >>>> through different SIP servers), but after a few days, "out of >>>> memory" errors start to occur. After this, calls don't work >>>> anymore, even if openser continues to run. >>>> >>>> Here is a part of the log, showing the first errors: >>>> >>>> Jun 5 17:25:43 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:25:43 localhost >>>> SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer >>>> Jun 5 17:25:43 localhost SER[27772]: ERROR: via_builder: out of >>>> memory Jun 5 17:25:43 localhost SER[27772]: ERROR: build_local: no >>>> via header got from builder Jun 5 17:25:43 localhost SER[27772]: >>>> ERROR: attempt to build a CANCEL failed Jun 5 17:25:50 localhost >>>> SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:25:50 localhost >>>> SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer >>>> Jun 5 17:25:50 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_req: out of memory ; needs 410 Jun 5 >>>> 17:26:11 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:26:11 localhost >>>> SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer >>>> Jun 5 17:26:11 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_req: out of memory ; needs 404 Jun 5 >>>> 17:26:25 localhost SER[27772]: eval_elem: no more memory Jun 5 >>>> 17:26:25 localhost SER[27772]: do_assign: no value in right >>>> expression Jun 5 17:26:25 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:26:25 localhost >>>> SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer >>>> Jun 5 17:26:25 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_req: out of memory ; needs 420 Jun 5 >>>> 17:26:25 localhost SER[27771]: ERROR:forward_reply: no 2nd via >>>> found in reply Jun 5 17:26:31 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:26:31 localhost >>>> SER[27772]: ERROR:forward_reply: building rpl from req failed Jun >>>> 5 17:26:33 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_res: out of mem Jun 5 17:26:33 localhost >>>> SER[27772]: ERROR:forward_reply: building rpl from req failed Jun >>>> 5 17:26:38 localhost SER[27772]: ERROR: insert_new_lump_after: >>>> out of memory >>>> Jun 5 17:26:38 localhost SER[27772]: ERROR: insert_new_lump_before: >>>> out of memory >>>> Jun 5 17:26:38 localhost SER[27772]: insert_RR(): Error while >>>> inserting conditional lump Jun 5 17:26:38 localhost SER[27772]: >>>> ERROR: subst_str: mem. >>>> allocation error (res->s) >>>> Jun 5 17:26:38 localhost SER[27772]: ERROR: do_action: memory >>>> allocation failure Jun 5 17:26:38 localhost SER[27772]: ERROR: >>>> build_res_buf_from_sip_req: out of memory ; needs 375 Jun 5 >>>> 17:26:38 localhost SER[27772]: ERROR: mk_proxy: memory allocation >>>> failure Jun 5 17:26:38 localhost SER[27772]: >>>> ERROR:tm:t_forward_nonack: >>>> failure to add branches >>>> >>>> At this point, similar errors continue to appear and the only way >>>> to recover is to restart openser. >>>> Nothing unusual seems to cause the initial error. The output of >>>> "top" appears to be fine after the "crash", and there is still >>>> plenty free memory on the server. >>>> >>>> >>>> Could anybody give me some hints on how to solve the problem? I >>>> suspect a portion of the config file where the record-route headers >>>> are split on multiple lines (for compatibility issues with another >>>> SIP proxy). It's the only place where variables are used. You can >>>> find it here: >>>> >>>> http://switzernet.com/people/christian-lathion/files/070605-openser <http://switzernet.com/people/christian-lathion/files/070605-openser> >>>> -config-part.txt >>>> >>>> >>>> Otherwise the config file is quite usual, with basic processing and >>>> routing of SIP packets. >>>> >>>> Regards, >>>> Christian >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)openser.org >>>> http://openser.org/cgi-bin/mailman/listinfo/users <http://openser.org/cgi-bin/mailman/listinfo/users> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)openser.org >>> http://openser.org/cgi-bin/mailman/listinfo/users <http://openser.org/cgi-bin/mailman/listinfo/users> >>> >> > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users <http://openser.org/cgi-bin/mailman/listinfo/users> Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

1 0

[Users] Error: udp_send
by Josh Tressler 11 Jun '07

11 Jun '07

All: I am receiving the following error below and I'm unable to determine the cause. I am new to OpenSER, so if it is something obvious, please let me know. This is currently installed on a CentOS 5 box with mysql 5. My configuration file is listed below. This happens as soon as I try to place a call that should get sent to asterisk running on the same machine. ====================== Jun 11 14:38:00 poll /usr/local/sbin/openser[13403]: START ROUTE 3 Jun 11 14:38:00 poll /usr/local/sbin/openser[13403]: START ROUTE 1 Jun 11 14:38:00 poll /usr/local/sbin/openser[13403]: ERROR: udp_send: sendto(sock,0xb60b0d00,899,0,0xb60af0c4,16): Operation not permitted(1) Jun 11 14:38:00 poll /usr/local/sbin/openser[13403]: msg_send: ERROR: udp_send failed Jun 11 14:38:00 poll /usr/local/sbin/openser[13403]: ERROR:tm:t_forward_nonack: sending request failed ====================== Thanks, Josh ====================== # ----------- global configuration parameters ------------------------ debug=3 log_facility=LOG_LOCAL7 fork=yes log_stderror=no children=5 check_via=yes dns=no rev_dns=no #dns_use_search_list=no #dns_servers_no=2 disable_dns_blacklist=true listen=X.X.X.X:5060 alias="cacti.dev.lcl" alias="X.X.X.X" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "domain.so" loadmodule "acc.so" loadmodule "uri_db.so" loadmodule "alias_db.so" loadmodule "avpops.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 3) # -- auth params -- modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") # -- define db connection for other modules -- modparam("acc|auth_db|avpops|group|speeddial|uri_db|usrloc|domain|alias_ db", "db_url", "mysql://USERNAME:PASSWORD@localhost/openser") modparam("mysql", "auto_reconnect", 1) modparam("mysql", "ping_interval", 300) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "log_level", 1) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 3) # -- tm params -- modparam("tm", "fr_timer", 35) modparam("tm", "fr_inv_timer", 30) modparam("tm", "noisy_ctimer", 1) # -- avp params -- modparam("avpops", "avp_table", "usr_preferences") # ------------------------- request routing logic ------------------- # main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); }; if(method!="REGISTER" && method!="ACK") { setflag(1); }; #do not send to voicemail if BYE or CANCEL #is used to end call before user pickup or timeout if(method=="CANCEL" || method=="BYE") { setflag(10); }; #if (uri==myself) { if (method=="ACK") { route(1); exit; } if (method=="CANCEL") { route(1); exit; } if (method=="INVITE") { route(3); exit; } else if (method=="REGISTER") { route(2); exit; }; #} route(1); } route[1] { xlog("L_INFO", "START ROUTE 1\n"); if (!t_relay()) { sl_reply_error(); }; } route[2] { sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; } if (!check_to()) { sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if (!save("location")) { sl_reply_error(); } } route[3] { xlog("L_INFO", "START ROUTE 3\n"); if (!is_uri_host_local()) { route(1); return; }; if (!lookup("location")) { route(4); return; }; t_on_failure("1"); route(1); } route[4] { xlog("L_INFO", "ROUTE BLOCK 4\n"); if (!proxy_authorize("cacti.dev.lcl","subscriber")) { proxy_challenge("cacti.dev.lcl","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; xlog("L_INFO", "Call OUT\n"); rewritehostport("127.0.0.1:5065"); # append_branch(); t_on_failure("1"); route(1); } failure_route[1] { xlog("L_INFO", "FAILURE ROUTE 1\n"); if (t_check_status("487")) { return; }; } ======================

1 0

Re: [Serusers] need help!
by SIP 11 Jun '07

11 Jun '07

http://www.iptel.org/faq/why_does_ser_fail_to_start_with_an_error_load_modu… N. Mukesh Prajapati wrote: > i m getting following error: > > 0(14333) ERROR: load_module: could not open module > </usr/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open > shared object file: No such file or directory > 0(14333) parse error (15,13-14): failed to load module > ERROR: bad config file (1 errors) > > > */SIP <sip(a)arcdiv.com>/* wrote: > > What's the EXACT error when you start SER? > > N. > > > > Mukesh Prajapati wrote: > > > > hi, > > > > I m trying to add my-sql support to my SER. i install SER with .deb > > package. > > I uncommented the lines regarding my-sql.so module.... > > now when i try to start server it's giving error like "bad > > configuration file" > > can anybody halp me in this regard? > > > > thnx > > mukesh > > > > > ------------------------------------------------------------------------ > > We won't tell. Get more on shows you hate to love > > > > (and love to hate): Yahoo! TV's Guilty Pleasures list. > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > ------------------------------------------------------------------------ > Pinpoint customers > <http://us.rd.yahoo.com/evt=48250/*http://searchmarketing.yahoo.com/arp/spon…>who > are looking for what you sell.

1 0

[Users] Memory issues
by Christian 11 Jun '07

11 Jun '07

Hi All, I have a recurrent memory problem with openser 1.2.0. In this case it only acts as a SIP router. No registration, accounting etc. and only approx. 20 simultaneous calls. Here is the problem: everything works fine (calls from/to PSTN through different SIP servers), but after a few days, "out of memory" errors start to occur. After this, calls don't work anymore, even if openser continues to run. Here is a part of the log, showing the first errors: Jun 5 17:25:43 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:25:43 localhost SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer Jun 5 17:25:43 localhost SER[27772]: ERROR: via_builder: out of memory Jun 5 17:25:43 localhost SER[27772]: ERROR: build_local: no via header got from builder Jun 5 17:25:43 localhost SER[27772]: ERROR: attempt to build a CANCEL failed Jun 5 17:25:50 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:25:50 localhost SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer Jun 5 17:25:50 localhost SER[27772]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 410 Jun 5 17:26:11 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:26:11 localhost SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer Jun 5 17:26:11 localhost SER[27772]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 404 Jun 5 17:26:25 localhost SER[27772]: eval_elem: no more memory Jun 5 17:26:25 localhost SER[27772]: do_assign: no value in right expression Jun 5 17:26:25 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:26:25 localhost SER[27772]: ERROR:tm:relay_reply: no mem for outbound reply buffer Jun 5 17:26:25 localhost SER[27772]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 420 Jun 5 17:26:25 localhost SER[27771]: ERROR:forward_reply: no 2nd via found in reply Jun 5 17:26:31 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:26:31 localhost SER[27772]: ERROR:forward_reply: building rpl from req failed Jun 5 17:26:33 localhost SER[27772]: ERROR: build_res_buf_from_sip_res: out of mem Jun 5 17:26:33 localhost SER[27772]: ERROR:forward_reply: building rpl from req failed Jun 5 17:26:38 localhost SER[27772]: ERROR: insert_new_lump_after: out of memory Jun 5 17:26:38 localhost SER[27772]: ERROR: insert_new_lump_before: out of memory Jun 5 17:26:38 localhost SER[27772]: insert_RR(): Error while inserting conditional lump Jun 5 17:26:38 localhost SER[27772]: ERROR: subst_str: mem. allocation error (res->s) Jun 5 17:26:38 localhost SER[27772]: ERROR: do_action: memory allocation failure Jun 5 17:26:38 localhost SER[27772]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 375 Jun 5 17:26:38 localhost SER[27772]: ERROR: mk_proxy: memory allocation failure Jun 5 17:26:38 localhost SER[27772]: ERROR:tm:t_forward_nonack: failure to add branches At this point, similar errors continue to appear and the only way to recover is to restart openser. Nothing unusual seems to cause the initial error. The output of "top" appears to be fine after the "crash", and there is still plenty free memory on the server. Could anybody give me some hints on how to solve the problem? I suspect a portion of the config file where the record-route headers are split on multiple lines (for compatibility issues with another SIP proxy). It's the only place where variables are used. You can find it here: http://switzernet.com/people/christian-lathion/files/070605-openser-config-… Otherwise the config file is quite usual, with basic processing and routing of SIP packets. Regards, Christian

3 4

[Users] Interaction Presence Agent - Presence User Agent
by Schumann Sebastian 11 Jun '07

11 Jun '07

Dear all, I have a question for understanding: I have implemented one OpenSER as Registrar and one OpenSER as Presence Agent plus XCAP Server 1.0.0. This is all working so far with newest SVN Release (Big Thanks to Ovidiu and Anca for the hint) of OpenSER. Now I want to deploy a Web-Front-End for user interaction with the Presence Core, because not all clients used are SIMPLE capable. User of non-capable devices should be able to just login and change their presence state. They do not necessarily have to be registered at the registrar, why PUA+ pua_usrloc on registrar side is no choice. I was thinking about another OpenSER deployed as PUA plus the pua_mi module for a solution. It gets commands from Web-Frontend via PHP, forwarded to the FIFO with pua_mi module. The problem I have now is that the messages are sent just once. Means a user changes his presence state, PUA sends a PUBLISH to PA but after the expiry the user appears to be offline. Is there any possiblitiy to let the PUA send messages constantly, when the user selects online - means all the time until offline is selected? I was thinking about many possiblities (cronjob or shellscript running all the time during online time and sending data to FIFO) but they are more or less just work-arounds. Best regards Sebastian Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 232, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 910 643010 (mobile) sebastian.schumann(a)t-com.sk http://www.t-com.sk

2 2

[Serusers] problem with MESSAGE and un-REGISTER
by KUMAR 11 Jun '07

11 Jun '07

hi all, I've started using SER 2.0 rc1 and am having a bit of problems with UA behind NAT. I'm using Windows Messenger 5.1 as the UA. Everything works fine when both UAs are not behind NAT. But when I place one of the UAs behind NAT, then, here's what happens, in this order UA Behind Nat ----------MESSAGE------>UA outside NAT..............ok UA outside NAT-----------MESSAGE------->UA behind NAT.............OK UA behind NAT------------MESSAGE------->UA outside NAT.............message is stored by msilo module and sent after some time. The log shows: MSILO: the downstream UA doesn't support MESSAGEs Notice that this only happens once a message from outside of NAT is sent to UA inside NAT. I am using RTP Proxy for NAT solution which is on the same system as SER. Moreover, I also cannot signout using the Windows Messenger. However, when I tested using XLite, None of the above mentioned problems arose. Can anyone please suggest me as to where the problem might be. The ser.cfg that I'm using is the one from the iptel site, the one with NAT & RTPproxy. I am also attaching the ser.cfg. Thank you in advance. Kumar

2 7

[Serusers] Presence pa module - no NOTIFY messages sent
by tzieleniewski 11 Jun '07

11 Jun '07

Hi, I am using SER rel_2_0_0. I am trying to set up a presence server as a simple PA. I am using xlite UA and when UA registers and subscribes to a particular user presence Event SER doesn't sent a NOTIFY according to the 'time_interval' module parameter. It only responses with the 'immediate NOTIFY' with the closed status tuple. According to my configuration SER should sent a NOTIFY every 15 seconds and it doesn't do it at all. I kindly ask for your feedback. Below I attached my module configuration and messages exchanged with UA. # -- pa params -- modparam("pa", "default_expires",300) modparam("pa", "max_subscription_expiration", 3600) modparam("pa", "max_publish_expiration", 3600) modparam("pa", "use_db", 1) modparam("pa", "use_callbacks", 1) modparam("pa", "watcherinfo_notify", 0) modparam("pa", "use_offline_winfo", 0) modparam("pa", "offline_winfo_expiration", 259200) modparam("pa", "auth", "none") modparam("pa", "winfo_auth", "implicit") modparam("pa", "pres_rules_file", "presence-rules.xml") modparam("pa", "ignore_408_on_notify", 0) modparam("pa", "timer_interval", 15) modparam("pa", "default_priority_percentage", 0) modparam("pa", "auth_rules_refresh_time", 300) modparam("pa", "async_auth_queries", 1) modparam("pa", "max_auth_requests_per_tick", 600) # U 2007/06/04 16:52:16.423720 192.168.0.229:7060 -> 192.168.0.165:5160 SUBSCRIBE sip:sen@voip.rd.touk.pl SIP/2.0. Via: SIP/2.0/UDP 192.168.0.229:7060;branch=z9hG4bK-d87543-da69e92af464fa08-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:hulk@192.168.0.229:7060>. To: <sip:sen@voip.rd.touk.pl>. From: "hulk(a)voip.rd.touk.pl"<sip:hulk@voip.rd.touk.pl>;tag=8e1a6d2f. Call-ID: MGYxYTg5ZjEyYWM1NzA4NjgwOGRlODNjNTNiZmZkNmQ.. CSeq: 1 SUBSCRIBE. Expires: 300. Accept: multipart/related, application/rlmi+xml, application/pidf+xml. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. User-Agent: X-Lite release 1006e stamp 34025. Event: presence. Content-Length: 0. . # U 2007/06/04 16:52:16.471312 192.168.0.165:5160 -> 192.168.0.229:7060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 192.168.0.229:7060;branch=z9hG4bK-d87543-da69e92af464fa08-1--d87543-;rport=7060. To: <sip:sen@voip.rd.touk.pl>;tag=5b4167208bb1319f0333e26fe8df2283-d4d1. From: "hulk(a)voip.rd.touk.pl"<sip:hulk@voip.rd.touk.pl>;tag=8e1a6d2f. Call-ID: MGYxYTg5ZjEyYWM1NzA4NjgwOGRlODNjNTNiZmZkNmQ.. CSeq: 1 SUBSCRIBE. Expires: 300. Contact: <sip:192.168.0.165:5160>. Server: Sip EXpress router (2.0.0-rc2 (x86_64/linux)). Content-Length: 0. Warning: 392 192.168.0.165:5160 "Noisy feedback tells: pid=25995 req_src_ip=192.168.0.229 req_src_port=7060 in_uri=sip:sen@voip.rd.touk.pl out_uri=sip:sen@voip.rd.touk.pl via_cnt==1". . # U 2007/06/04 16:52:16.471328 192.168.0.165:5160 -> 192.168.0.229:7060 NOTIFY sip:hulk@192.168.0.229:7060 SIP/2.0. Via: SIP/2.0/UDP 192.168.0.165:5160;branch=z9hG4bK967b.6e9cb884.0. To: "hulk(a)voip.rd.touk.pl"<sip:hulk@voip.rd.touk.pl>;tag=8e1a6d2f. From: <sip:sen@voip.rd.touk.pl>;tag=5b4167208bb1319f0333e26fe8df2283-d4d1. CSeq: 10 NOTIFY. Call-ID: MGYxYTg5ZjEyYWM1NzA4NjgwOGRlODNjNTNiZmZkNmQ.. Content-Length: 208. User-Agent: Sip EXpress router(2.0.0-rc2 (x86_64/linux)). Max-Forwards: 70. Event: presence. Content-Type: application/pidf+xml;charset="UTF-8". Contact: <sip:192.168.0.165:5160>. Subscription-State: active;expires=300. . <?xml version="1.0" encoding="UTF-8"?>. <presence xmlns="urn:ietf:params:xml:ns:pidf" entity="pres:sen@voip.rd.touk.pl">. .<tuple id="none">. ..<status><basic>closed</basic></status>. .</tuple>. </presence>. # U 2007/06/04 16:52:16.572189 192.168.0.229:7060 -> 192.168.0.165:5160 SIP/2.0 200 OK. Via: SIP/2.0/UDP 192.168.0.165:5160;branch=z9hG4bK967b.6e9cb884.0. Contact: <sip:hulk@192.168.0.229:7060>. To: "hulk(a)voip.rd.touk.pl"<sip:hulk@voip.rd.touk.pl>;tag=8e1a6d2f. From: <sip:sen@voip.rd.touk.pl>;tag=5b4167208bb1319f0333e26fe8df2283-d4d1. Call-ID: MGYxYTg5ZjEyYWM1NzA4NjgwOGRlODNjNTNiZmZkNmQ.. CSeq: 10 NOTIFY. User-Agent: X-Lite release 1006e stamp 34025. Content-Length: 0. . . Cheers TOmasz

2 9

[Users] Insert a Header into ACK message
by fancy 11 Jun '07

11 Jun '07

Dear All: I've tried many methods to add Max-Forwarsd header into ACK message (message 8), all methods I tried were fail. According to RFC 3261 8.1.1.6, Max-Forwards must exist in this ACK message. Can anyone tell me how to add a header into ACK message? Thank you very much. UA11 : NUT(Proxy 1) : UA12 | : | : | |-------:------->| : | 1. INVITE |<------:--------| : | 2. 407 |-------:------->| : | 3. ACK | : | : | |-------:------->| : | 4. INVITE | : |-------:------->| 5. INVITE |<------:--------| : | 6. 100 | : | : | | : |<------:--------| 7. 486 (Busy Here) | : | : | | : |-------:------->| 8. ACK | : | : | |<------:--------| : | 9. 486 | : | : | |-------:------->| : |10. ACK | : | : | Best Regards, Fangyu Ling

1 0

[Serusers] problems with ser.cfg
by Kirk McCalla 08 Jun '07

08 Jun '07

Hello I am new to ser. I just loaded my ser and mysql and they are up and running. I am using CENTOS for my operating system. I am trying to configure the ser.cfg file and I keep getting this error. ERROR: load_module: could not open module </usr/lib/ser/modules/mysql.so>: /usr/lib/libmysqlclient.so.14: cannot restore segment prot after reloc: Permission denied Now I have libmysqlclient.so.14 loaded and mysql.so is also loaded [root@localhost lib]# find libmysqlclient.so.14 libmysqlclient.so.14 [root@localhost lib]# I cant seee where I could be going wrong here. I load just fine when I dont have the loadmodule "/usr/lib/ser/modules/mysql.so" uncomented. This is my config file # $Id: auth-mysql.cfg 46 2006-01-25 04:21:30Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=3 fork=no log_stderror=yes sten=192.168.0.102 # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost /ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- if (!t_relay()) { sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); }

3 4

[Users] A question about header insertion...
by nick 08 Jun '07

08 Jun '07

I'm trying to insert a Remote-Party-ID header into my INVITE messages, but I'm finding that when I do so, it's ending up further down in the message than it should be. After the Content Type header in fact. How is it decided where to insert the header, is it based on the time that the insertion of the header happens during the processing of the invite? Can I specify that it be inserted before the content type header in some way? (I didn't see this as an option..)

2 1

[Users] Dispatcher crash OpenSER
by Federico Cabiddu 08 Jun '07

08 Jun '07

Playing with my dispatcher configuration (openser-1.2.1) I discovered that ds_select_dst() crashes openser when dispatche param ds_use_default is set to 1 and the set from where the destination is picked up contains just one address. This appens because in dispatch.c at row 784 the code is if(ds_use_default!=0) hash = hash%(_ds_list[idx].nr-1); else hash = hash%_ds_list[idx].nr; so if ds_use_default is set and the address set has 1 destination the % causes a crash. To avoid this it's enough to modifiy the if statement like: if (ds_use_default!=0 && _ds_list[idx].nr!=1) Just my two cents. Regards, Federico -- Federico Cabiddu R&D Software Engineering Abbeynet S.p.A. - www.abbeynet.com <http://www.abbeynet.com> phone: +39 070 2339349 <http://www.federico_cabiddu.sitofono.it>

2 1

[Serusers] help needed!
by Mukesh Prajapati 08 Jun '07

08 Jun '07

Hi all I am new to SER I am configuring SER for simple scenario with to X-Lite user agents and SER server on Ubuntu. So , plz help me configuring ser.cfg file.. how can i reguster both user agents (soft phones ) to my SER server. Thnks mukesh --------------------------------- Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when.

2 1

[Users] null script variable value in tw_append
by jh＠tutpro.com 08 Jun '07

08 Jun '07

if i have modparam("tm", "tw_append", "params:P-X=$avp(i:100);P-Y=$var(foo)") and assign null to both $avp(i:100) and $var(foo) before t_write_unix(), then P-Y is appended (with value 0), but P-X is not. in my opinion, also P-Y should not be appended, i.e., script variable value null should be treated the same way as pseudo variable null value. -- juha

1 0

[Users] is it possible to unset a script variable?
by jh＠tutpro.com 08 Jun '07

08 Jun '07

is it somehow possible to unset a script variable? i'm not absolutely sure, but looks like script variables can retains their values from processing of one request to another so it is important to be able to reset them. -- juha

2 3

[Users] Help on probably memory leak
by Marcello Lupo 08 Jun '07

08 Jun '07

Hi to all, i converted my config from 1.0.0 version (workng like charm) to 1.2.0 and started to test the 1.2.0 version. I started to get out of memory message in the logs from this morning on the test proxy i have till it involved all the threads and the proxy stop working. It is an openser-1.2.0-notls and is almost unloaded because it is under simple testing. I think this is the reason it worked a lot of days before get the problem. I followed instructions on wiki and recomplied openser with memory debug options. I attach you the link to the output of logs, memory debug and some other useful informations because i'm absolutely not able to understand where can be the problem (i'm not a coder). http://82.193.22.211/memory_leak.txt The errors in the file are previous to the recompilation of openser with memory debug option enabled. Now from the restart of the process still no errors but i think it is for the very low load of the server. May be you can already found some memory leak in the memory debug log. If you can help it is very appreciated. Thank you to all. Bye, Marcello

1 0

Re: [Serusers] [Serdev] [Tracker] Reopened: (SER-263) Using @select=~ "regexp" causes segmentation fault
by Michal Matyska 08 Jun '07

08 Jun '07

Samuel, yes it is related to. The resolution of SER-263 was wrong and every test like if (@select=="") has returned false, even the return value of the select was empty string. But, there is another problem I see in the config (including the example script)... There is difference between the (@select) test and (@select!="") one. The latter returns false, if the select framework returns N/A value (e.g. non present header/parameter). Intended behaviour was: @X is @route[1].params.lr in this example (as the tag must have value if present rfc3261 19.3) lr parameter test result not present @X false !@X true @X=="" FALSE* @X!="" FALSE* lr @X true !@X false @X=="" true @X!="" false lr=123 @X true !@X false @X=="" false @X!="" true As I see the from the example ser.cfg, the tests are done in the (@to.tag=="") way, which won't work if the to.tag would return either N/A or the tag value. But it seems it returns the empty string even if not present, because it was previously working. So I ask the community (especially TB potential members) do we want to take care about the select N/A value differently, or shall we make it equal to empty string? Note, that if the answer is yes, it will be very hard to differentiate between parameter not present and parameter without value - well the lr parameter is handled internally, but what others? If the anwser is no, keep special N/A value handling, the select must be reviewed together with the ser.cfg, because (@to.tag=="") will be false for every tag (because it must have value). Michal On Čt, 2007-06-07 at 13:56 +0200, samuel wrote: > Michal, > > I've just post a question to users' list about not properly detecting > @to.tag=="". > > Is this bug related to it?? > > Thanks, > Samuel. > > 2007/6/7, Michal Matyska (JIRA) < tracker(a)iptel.org>: > [ http://tracker.iptel.org/browse/SER-263?page=all ] > > Michal Matyska reopened SER-263: > -------------------------------- > > > The way it is now resolved is wrong. If the select returns > empty string the script test if (@select=="") is false. > > > Using @select=~ "regexp" causes segmentation fault > > -------------------------------------------------- > > > > Key: SER-263 > > URL: http://tracker.iptel.org/browse/SER-263 > > Project: SER > > Issue Type: Bug > > Components: core, Selects > > Affects Versions: 2.0, Ipteldorf > > Environment: CVS head > > Reporter: Michal Matyska > > Assigned To: Michal Matyska > > Priority: Minor > > Fix For: 2.0, Ipteldorf > > > > > > If the result of the select is empty string or it is > STR_STATIC_INIT ( e.g. @uri.type) the prepatation of left > operand (putting \0 behind the string) causes segmentation > fault . > > Program received signal SIGSEGV, Segmentation fault. > > comp_str (op=11, left=0xbfad27a4, rtype=5, r=0x81932b0, > msg=0x81a1034) at route.c:668 > > 668 left->s[left->len]='\0'; > > -- > This message is automatically generated by JIRA. > - > If you think it was sent incorrectly contact one of the > administrators: > http://tracker.iptel.org/secure/Administrators.jspa > - > For more information on JIRA, see: > http://www.atlassian.com/software/jira > > > _______________________________________________ > Serdev mailing list > Serdev(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serdev > > _______________________________________________ > Serdev mailing list > Serdev(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serdev

3 3

[Users] Help with Openser
by Diogo Cosito 08 Jun '07

08 Jun '07

Hi All, how are you? They forgive simple question, but I am looking at the documentation of the project to openser and I do not obtain to understand very well what I must configure and as to configure openser, to also interconnect with one asterisk and with a supplier SIP. They could help me in as to make this? Best Regards Diogo _________________________________________________________________ Verificador de Segurança do Windows Live OneCare: combata já vírus e outras ameaças! http://onecare.live.com/site/pt-br/default.htm

2 1

Re: [Users] Can not connect SEMS on openser
by chungyu 08 Jun '07

08 Jun '07

sunkara wrote: use this function " t_write_unix("/tmp/sems_sock " the t_write_reg is not there in OpenSER, in global configuration ... describer openser_sock in the sems.conf ... mention the openser_sock i hope this help u I use unix function and change openser.cfg and edit sems.conf openser-1.2.1 sems-0.10.0-rc2 This is my openser.cfg debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 port=5060 unix_sock="/tmp/openser_sock" mpath="/usr/local/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "avpops.so" loadmodule "exec.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 0) modparam("tm", "fr_inv_timer", 15000) modparam("tm", "pass_provisional_replies", 1) modparam("rr", "enable_full_lr", 1) modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ser") modparam("avpops", "avp_table", "subscriber") #modparam("avpops", "uuid_cloumn", "id") #modparam("avpops", "username_cloumn", "username") modparam("avpops", "db_scheme", "email_scheme:table=subscriber;value_col=email_address;value_type=string") modparam("tm", "tw_append", "voicemail_headers: UA=$hdr(User-Agent);P-Email-Address=$avp(s:email)") route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (!method=="REGISTER") record_route(); if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; if (!lookup("location")) { if (!t_newtran()){ sl_send_reply("500", "could not create new transaction"); exit; }; avp_db_load("$ru/username", "$avp(s:email)/$email_scheme"); if (!t_write_unix("/tmp/sems_sock", "voicemail/voicemail_headers")){ t_reply("500", "aaaaa"); exit; }; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; exit; } This is my sems.conf plugin_config_path=/usr/local/etc/sems/etc/ fork=yes stderr=no loglevel=2 socket_name=/tmp/sems_sock reply_socket_name=/tmp/sems_reply_sock ser_socket_name=/tmp/openser_sock send_method=socket plugin_path=/usr/local/lib/sems/plug-in smtp_server=localhost smtp_port=25 rtp_low_port=10000 rtp_high_port=60000 media_processor_threads=1 But error msssgae is server error occurred(1/SL) error log is Jun 8 15:58:10 host /usr/local/sbin/openser[1462]: ERROR:tm:t_forward_nonack: no branch for forwarding Jun 8 15:58:10 host /usr/local/sbin/openser[1462]: ERROR:tm:w_t_relay: t_forward_nonack faile I can not find problem What is error with my configuration? Thank you for your reply. Chungyu

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users