- sr-users - kamailio.org

Dispatcher - ds_select_dst based on attribute value
by rainolf 15 May '20

15 May '20

Hi everyone, Let's say i want to add additional attribute in every dispatcher database entry in form of: *Example:* extension_set=100-199;branch=NewYork Let's say also i have more than one entry in dispatcher database with these attributes and same priority. *EX:* IP=192.168.1.1;priority=1;attr=extension_set=100-199;branch=NewYork;Descrioption=PBX Production IP=192.168.1.2;priority=1;attr=extension_set=100-199;branch=NewYork;Descrioption=PBX Backup What i want to achieve is to select multiple destination with ds_select and algorithm 8(priority) based on dialed extension. I can get attributes with: $(xavp(_dsdst_=>attrs) but, off course, this may be possible only after destination selection has been made by dispatcher. Currently i've create a switch statement in order set statically a variable with the right priority like: # dial number selection switch($rU) { case /"^[1][0-9][0-9]$": # starting with 1XX xlog("L_NOTICE","THE DIALED NUMBER IS: $rU ... Searching for available destinations!!!\n"); $var(ds_priority) = 1; break; default: exit; } ds_select_dst($var(ds_priority), 8); #Get an up destination from dispatcher with priority 1 xlog("L_NOTICE","Calling Dispatcher $du -- $siz:$sp with PARAMETER ATTRIBUTE: (attrs: $xavp(_dsdst_=>attrs))\n"); xlog("L_NOTICE","THE BRANCH IS SET AS: $(xavp(_dsdst_=>attrs){param.value,branch})\n"); xlog("L_NOTICE","THE EXTENSION SET IS: $(xavp(_dsdst_=>attrs){param.value,extension_set})\n"); t_on_failure("DISPATCH_FAILURE"); but i would like to achieve something more dynamic which permit me to create a simple database entry. Probably there's a better way to do it maybe with the help of other modules or database tables. If someone can suggest me the best way or simply pointing me on the right direction. Appreciate Regards

1 0

Re: [SR-Users] Other issues encountered with MySQL 8 and Kamailio
by Yehuda Y 15 May '20

15 May '20

Hi Did you manage to use mysql8 with kamailio? Yehuda

1 0

Solution for Invite retransmission
by Duarte Rocha 14 May '20

14 May '20

Greetings, I have an issue where a client doesn't get the responses to the INVITE sent and as such keeps sending me retransmissions of the INVITE. While the transaction is still up, Kamailio does its job. However, when the transaction is closed Kamailio processes the request again as a first request (Doing Routing and Dispatcher operations again). In order to avoid the issue i've made the following code : // If it's the first INVITE if( is_method("INVITE") && !has_totag() ) { if(t_check_trans()) { xnotice("TRANS - INVITE Retransmission"); } else if ( is_known_dlg()) { xerr("KamTAG: INVITE in dialog without To Tag "); exit; } } Is this a good solution and still compliant with the SIP rules? Best Regards

3 3

Problem with Teams and Kamailio and calls hangup after 6 seconds
by sip user 13 May '20

13 May '20

Hi, I'm trying to connect Teams with Kamailio. I'd configured and it works, but a few days ago, calls Teams to kamailio no works. I call from Teams and in Kamailio I see the call, ring the extensions in Kamailio, but after 6 seconds, the call hangup. I received the INVITE, I send Trying and 200 Ok, but never received ACK from Teams. Anyone knows how can I check it? I have configurated SBC in teams like https://skalatan.de/en/blog/kamailio-sbc-teams Thanks

1 0

Issue of calls drop 32s
by Rex Lin (林昱頡) 13 May '20

13 May '20

Hi, It’s weird that the calls always drop after 32s while the callee is using public ip. Also, Server forwards ACK to itself with UDP, instead of forwarding to callee with TLS. Moreover, I cannot see “Received” in AOR as the callee finish the registration. I recognized it’s marked by nat_uac_test(“19”) and set with fix_nated_register(), the problem can be resolved. My scenario is as below, for your reference. 1.Kamailio version is 4.4.7, listening public ip. 2.Caller it’s behind NAT. 3.Clients of Linphone. Do you know the reason why it happened? Best Regards, Rex

2 1

Kamailio 5.2.7 Released
by Henning Westerholt 13 May '20

13 May '20

Hello, Kamailio SIP Server v5.2.7 stable release is out. This is a maintenance release of the previous stable branch (5.2), that includes fixes since the release of v5.2.6. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.2.x. Deployments running previous v5.2.x versions are strongly recommended to be upgraded to v5.2.7. For more details about version 5.2.7 (including links and guidelines to download the tar file or from GIT repository), visit: https://www.kamailio.org/w/2020/05/kamailio-5-2-7-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 0

Re: [SR-Users] [sr-dev] Unable to make SIP Calls (403 Forbidden - Domain Not Served)
by Pavithra M 13 May '20

13 May '20

Hi, I have my kamailio ims with NAT and rtpproxy enabled. When i make a call from outside , rtp packets is not going. Could you please tell me how to configure NAT to get rtp packets in pcscf . On Fri, Apr 17, 2020 at 4:30 PM David Villasmil < david.villasmil.work(a)gmail.com> wrote: > It doesn’t make a lot of sense to see looping calls “connected”. If they > connect, then they’re not looping, unless there is some counter somewhere > that answers the call when it sees a loop. > > That’s very weird. > > Use sngrep and trace on ALL interfaces. > > On Fri, 17 Apr 2020 at 11:46, Pavithra M <pavimohan3096(a)gmail.com> wrote: > >> Hi, >> In Wireshark , I couldn't able to see the looping packets .In debug logs >> of pcscf , I am able to see the looping occurs . But how then the call gets >> connected . That's where I am struck . >> >> On Fri, Apr 17, 2020, 4:11 PM David Villasmil < >> david.villasmil.work(a)gmail.com> wrote: >> >>> You need to trace sip. There’s a loop somewhere. Use tshark (wireshark) >>> or sngrep or ngrep, or some similar network tracing tool. >>> >>> On Fri, 17 Apr 2020 at 11:34, Pavithra M <pavimohan3096(a)gmail.com> >>> wrote: >>> >>>> Hi , >>>> >>>> I am getting the call connected and got 200 ok from the client . But >>>> the INVITE packet goes multiple times between terminating pcscf and s-cscf >>>> and gives too many hops error .Even After that call goes perfectly fine >>>> with 200 ok message. >>>> What would be the reason . I am not getting any errors in my logs with >>>> debug log level 6 . >>>> >>>> Kindly tell me what could be the issue . >>>> >>>> >>>> >>>> >>>> On Thu, Apr 16, 2020, 2:16 PM David Villasmil < >>>> david.villasmil.work(a)gmail.com> wrote: >>>> >>>>> That usually happens when you don’t set a next hop, or destination >>>>> where the packet should go, so the packet of forwarded to the same >>>>> destination, which is the proxy again. >>>>> >>>>> On Thu, 16 Apr 2020 at 06:56, Pavithra M <pavimohan3096(a)gmail.com> >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I have enabled all debug logs and i traced it and I found that as you >>>>>> said it is keep on looping the invite in pcscf instead of going to other UE >>>>>> . I couldn't able to find the reason.Can you please give me some input on >>>>>> this. >>>>>> >>>>>> Debug logs of pcscf : >>>>>> 0#015#012Via: SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.c9499ad5ce252a99a36ad8b9b70f04d4.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.a00d9260e4373806e691bfa2828ab215.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.6ab08c40989814cf3726b826bdef39d2.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.e650088370f5d61c0d902d1a40fc1252.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.44a3f1c7026e2d42810722ae5c4bf942.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.54030b75c055258251ec7e6980c78c74.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.9a08d87ec59a03501dcd55413ce046eb.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.f36a9dba7b795e3b96df4bb6b480a688.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.b49469c77e102314d82036734a413360.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.221403deba39c28c50f332a8fde22646.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.77f89368e68665c1e3ffdc1d1bea7bab.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060 >>>>>> ;branch=z9hG4bK7014.2e5981568975ea5c81876a9dded1bc08.0# >>>>>> 015#012Via: SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.19809abdb9c351fdce7e25f51e8c1754.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.ad73d18d15b6c9da96e13156a84d5522.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.fcb5555d6a683215aa989fb4254abd62.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.244b467757383234c76b1c66f98ddfe8.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.b2c353ef1d637907359822c64cb81b2a.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.d22dceb1af0320cfc769f94e0214a313.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.f5e9b7f9b209c82971ae1017b9ad7d1e.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.0f2c98bc92cc799fdce0a4090b626021.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.aa8a07d89f83a26cefd74e4770aef63c.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.94c376a77d066ffe113e84465f5f5311.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.2202e658b1d8b801b14ec432bae7fabe.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.55f7d6a5d9d2a9d064cf1c6683f12eca.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.6870e53f3bc573f140d1728401dd43ae.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.a84d83df8646a75ee0d3605dcacb45ad.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.486b6fb0d17077e20f8375188a8bee75.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.bc0321f98578ab09ad615b634c4c83cd.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.9b26fda9326632abf7bdb32a33d03ab2.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.060fa4afc70848b34ede46705b90f7cb.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.56134adb7c492f7a4f03b36dfbf713f5.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.f9ccc5e81175283c9b4b56f4a2252c0f.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.3c231176b0e95b8121637df41b504f18.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.95bd5b0e0bf8c2bda906a751816a9876.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.87e0fd0a1bd044147d22052d27e07527.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.73:4080;branch=z9hG4bK7014.0a319c71a9a26c8afa77713d6d4ecfed.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.79:4070;branch=z9hG4bK7014.1442d975c0a393f232020916a6fbfc15.1#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.73:4080;branch=z9hG4bK7014.e35a84678ec61f7cefa8cdacb6ba92d9.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060;branch=z9hG4bK7014.cc99617f0c0f5088f45e203f6a58dd57.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.174:36029;received=10.45.6.174;branch=z9hG4bK-524287-1---c856c42a33d1e959;rport=36029#015#012To: >>>>>> <sip:bob@sip.example.com>;tag=8409f602ccf3f3f0da6ebceab6ff6336.aa5bd74f#015#012From: >>>>>> <sip:alice@sip.example.com;transport=UDP>;tag=cdbaae3f#015#012Call-ID: >>>>>> I-58e6z5tN3aDpmdzq1oVA..#015#012CSeq: 1 INVITE#015#012Server: TelcoSuite >>>>>> Proxy-CSCF#015#012Content-Length: 0 >>>>>> >>>>>> As you see here , continuously invite is going on looping in >>>>>> 10.45.6.179 IP which is pcscf. What could be the reason .. Kindly do the >>>>>> needful. >>>>>> >>>>>> On Wed, Apr 15, 2020, 2:19 PM David Villasmil < >>>>>> david.villasmil.work(a)gmail.com> wrote: >>>>>> >>>>>>> You should be tracing, you’re probably not, otherwise you would see >>>>>>> the server is probably forwarding the INVITE to itself (removing one hop >>>>>>> every time as it must) and thus creating a loop. >>>>>>> >>>>>>> On Wed, 15 Apr 2020 at 09:42, Pavithra M <pavimohan3096(a)gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi , >>>>>>>> Yes , I have tried uncommenting that part . It is actually checking >>>>>>>> for hostname (sip.example.com:5060) in my scscf node. I am not >>>>>>>> sure why it is looking for sip.example.com instead of >>>>>>>> scscf.sip.example.com:4080 >>>>>>>> >>>>>>>> I have added one more alias in my scscf.cfg file .Now Domain not >>>>>>>> served issue has gone. >>>>>>>> After that I am facing 483 Too Many Hops Error. >>>>>>>> >>>>>>>> I have added scscf debug logs. >>>>>>>> >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:482]: qm_free(): qm_free(0x7fc57b362010, >>>>>>>> 0x7fc57b514138), called from ims_registrar_scscf: lookup.c: lookup(225) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:526]: qm_free(): freeing frag. 0x7fc57b514100 alloc'ed >>>>>>>> from ims_registrar_scscf: lookup.c: lookup(103) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1041 a=16 n=if >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/socket_info.c:628]: grep_sock_info(): checking if host==us: 10==10 && >>>>>>>> [10.45.6.75] == [10.45.6.73]* >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/socket_info.c:635]: grep_sock_info(): checking if port 4080 >>>>>>>> (advertise 0) matches port 32347* >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/forward.c:412]: check_self(): host != me* >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1050 a=5 n=route >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[apply_privacy] c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=821 a=16 n=if >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[apply_privacy] c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=818 a=25 n=is_present_hf >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1052 a=24 n=t_relay >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:1328]: t_newtran(): msg (0x7fc57b502a70) id=2/7139 global >>>>>>>> id=2/7139 T start=(nil) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:497]: t_lookup_request(): start searching: hash=38849, isACK=0 >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:455]: matching_3261(): RFC3261 transaction matching failed - >>>>>>>> via branch [z9hG4bK1c79.03e4ec0c2ca15f1aa14c067b33a29f10.1]* >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:675]: t_lookup_request(): no transaction found >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:374]: qm_malloc(): qm_malloc(0x7fc57478b000, 5720) >>>>>>>> called from tm: h_table.c: build_cell(330) >>>>>>>> >>>>>>>> I am facing host is not me error . Here 10.45.6.73 -> scscf and >>>>>>>> 10.45.6.75 -> UE (bob user) >>>>>>>> I am not sure what alias it is asking for . Kindly help. >>>>>>>> >>>>>>>> On Wed, Apr 15, 2020 at 1:36 PM Pafel <pafels(a)gmail.com> wrote: >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> Most likely this is because of the change. Revert back the changes >>>>>>>>> (uncomment the section I told you), turn on debug in scscf.cfg, restart all >>>>>>>>> nodes and test once again. Then have a look on the scscf logs. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Pavel Siderov >>>>>>>>> _______________________________________________ >>>>>>>>> Kamailio (SER) - Development Mailing List >>>>>>>>> sr-dev(a)lists.kamailio.org >>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Kamailio (SER) - Development Mailing List >>>>>>>> sr-dev(a)lists.kamailio.org >>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>>> >>>>>>> -- >>>>>>> Regards, >>>>>>> >>>>>>> David Villasmil >>>>>>> email: david.villasmil.work(a)gmail.com >>>>>>> phone: +34669448337 >>>>>>> _______________________________________________ >>>>>>> Kamailio (SER) - Development Mailing List >>>>>>> sr-dev(a)lists.kamailio.org >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>> >>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Development Mailing List >>>>>> sr-dev(a)lists.kamailio.org >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>> >>>>> -- >>>>> Regards, >>>>> >>>>> David Villasmil >>>>> email: david.villasmil.work(a)gmail.com >>>>> phone: +34669448337 >>>>> _______________________________________________ >>>>> Kamailio (SER) - Development Mailing List >>>>> sr-dev(a)lists.kamailio.org >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Development Mailing List >>>> sr-dev(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>> >>> -- >>> Regards, >>> >>> David Villasmil >>> email: david.villasmil.work(a)gmail.com >>> phone: +34669448337 >>> _______________________________________________ >>> Kamailio (SER) - Development Mailing List >>> sr-dev(a)lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>> >> _______________________________________________ >> Kamailio (SER) - Development Mailing List >> sr-dev(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >> > -- > Regards, > > David Villasmil > email: david.villasmil.work(a)gmail.com > phone: +34669448337 > _______________________________________________ > Kamailio (SER) - Development Mailing List > sr-dev(a)lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >

1 0

Releasing Kamailio 5.2.7
by Henning Westerholt 13 May '20

13 May '20

Hello, as discussed in the last development meeting, I am planning to release next week (likely on Wednesday 13th May) the next minor version out of branch 5.2, version 5.2.7. Backports of fixed issues from git master will be integrated as usual. If you are aware of new issues which were not yet reported, let us know (by creating an issue on the tracker). Cheers, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 1

"kamdbctl create" scrip error "Invalid default value for 'action'"
by Вячеслав Панасов 13 May '20

13 May '20

Hi all I trying to install the test`s kamailio from repo in the new instance on the CentOS 7 with MariaDB 5.5.6 and get this ERROR message [user@testkamailio-002] # kamdbctl create MySQL password for root: INFO: test server charset INFO: creating database kamailio ... INFO: granting privileges to database kamailio ... INFO: creating standard tables into kamailio ... INFO: Core Kamailio tables succesfully created. Install presence related tables? (y/n): y INFO: creating presence tables into kamailio ... INFO: Presence tables succesfully created. Install tables for imc cpl siptrace domainpolicy carrierroute drouting userblacklist htable purple uac pipelimit mtree sca mohqueue rtpproxy rtpengine secfilter? (y/n): y INFO: creating extra tables into kamailio ... ERROR 1067 (42000) at line 1: Invalid default value for 'action' ERROR: Creating extra tables failed at secfilter! after if i try reinit i get this error [user@testkamailio-002] # kamdbctl reinit MySQL password for root: This will drop your current database and create a new one. It is recommended to first backup your database. Continue with reinit? (y/n): y INFO: Database kamailio deleted INFO: test server charset INFO: creating database kamailio ... INFO: granting privileges to database kamailio ... ERROR 1396 (HY000) at line 1: Operation CREATE USER failed for 'kamailio'@ 'localhost' ERROR 1396 (HY000) at line 1: Operation CREATE USER failed for 'kamailioro'@ 'localhost' ERROR: granting privileges to database kamailio failed! two weeks ago, the installation was successful, apparently there were some changes in the script cheers Vjacheslav Panasov

2 1

Determine correct port in record-route if kamailio is behind NAT
by Michal Popovic 12 May '20

12 May '20

Hello, our kamailio used for sip trunk interconnections is behind NAT and our cloud provider opens random outgoing ports for outbound connections. Our record-route is set to our external address and port 5060, that is probably incorrect, but we did not had any issues. One of our partners suddenly begin sending BYEs to the port advertised in record-route instead of port from where he received call. What is a correct approach here if we are not able to determine open port behind NAT? Bye, Michal

3 4

How to delete all values for a certain xavp index
by Sergiu Pojoga 11 May '20

11 May '20

Hi there, For some reason I can't figure this seemingly simple Subj, may be someone can help. In my particular case, trying to delete Contact[0] from the xavp storing Contacts after t_load_contacts() $xavp(tm_contacts[0]) = $null; Above results in all but the latest added value being deleted. Assigning $null to index[1] results in all but the latest 2 being delete and so on. Thanks.

3 8

Digest authentication w/ Kamailio & Freeswitch
by Edward Romanenco 11 May '20

11 May '20

Hi! I've using a SIP setup that includes both Kamailio & Freeswitch, invites are passed from Freeswitch and relayed by Kamailio to various dispatchers, I would like to have Kamailio authenticating when Proxy Authentication is required. As I understood, this can be achieved with the help of a failure route, problem is, when I'm utilizing this method - the 407 response gets reverted back to Freeswitch, which returns the revised invite filled with the default Freeswitch username/password, how can let Kamailio handle the authentication once receiving the 407? Can I work straight without relying on a failure route, but having the Proxy Authentication header on my original invite? This is my relevant configuration - route[RELAY] { if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) { t_on_branch("MANAGE_BRANCH"); } } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) { t_on_reply("MANAGE_REPLY"); } } if (is_method("INVITE")) { if(!t_is_set("failure_route")) { t_on_failure("KAM_AUTH"); } } if (!t_relay()) { sl_reply_error(); } exit; } failure_route[KAM_AUTH] { if(t_check_status("401|407")) { $avp(auser) = "xxx"; $avp(apass) = "yyy"; t_on_failure("OUTGOING_FAILURE"); uac_auth(); t_relay(); exit; } } Edward

2 2

How to get cause from reason header?
by Luis Rojas G. 11 May '20

11 May '20

Hello, I am sure that this is very easy to do, but I have been googling and I can't find a way. Having a Reason header, for instance : Reason: SIP;cause=Some_Cause;text="Some_text" How can I get the value of "Some_Cause"? I need to compare it to some specific numeric values... Thanks in advance, Luis -- Luis Rojas Software Architect Sixbell Los Leones 1200 Providencia Santiago, Chile Phone: (+56-2) 22001288 mailto:luis.rojas@sixbell.com http://www.sixbell.com

2 4

imc module
by nicola defilippo 11 May '20

11 May '20

Hi, i'm a newbie about kamailio, i'd like create an imc chat. I load the module but i don't understand what's the sip uri to use to create the chat (i understand that there is a sip uri for the chat manager, but i don't know what it is). I' became a bit crazy. Thanks for help and sorry for the stupid question (if it's). N.

2 2

Incorrect Load Calculation by Dispatcher Module in Kamailio
by harneet singh 11 May '20

11 May '20

Hi All, I have run into an issue with the Dispatcher Module in Kamailio, which apparently seems to be running into issues randomly while calculating the dispatcher load. I have submitted an issue wrt the same at https://github.com/kamailio/kamailio/issues/2322 with all the details and potential fix as well, based on analysis and tests. Can some one please take a look into the same? Regards, Harneet Singh -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

1 0

How S-CSCF route SIP INVITEs as per iFC ?
by Hamid Hashmi 11 May '20

11 May '20

I have added an Application Server in iFC and try to route one user to that Application server for testing But INVITE to that subscriber following the default iFC. I am using ng-voice HSS Server. I have been trying to differentiate between iFCs for two different subscribers and unable to find the store location of SAA xml on S-CSCF and I am Unable to find xml file of required subscribers in wireshark traces as well because it says in SAR that USER_DATA_ALREADY_EXISTS and SAA didn't contain any XML file for that specific users. Furthermore if you can describe SIP INVITEs routing mechanism of S-CSCF, on which params or SIP Headers S-CSCF route INVITEs to Application Servers according to iFC ? Regards Hamid R. Hashmi

2 1

Video Call for deaf
by www . deaf - tv . com 11 May '20

11 May '20

hello, my Server CentOs 7 with kamailio installed, Chat write good! Video call how modules ?? Kamailio V 5.3.3 Regards Denny Brendel

2 1

How Kamailio processes SIP ACK on local 4XX reply?
by Denys Pozniak 11 May '20

11 May '20

Hello! I have some misunderstanding regarding the processing of SIP ACK on local Kamailio 4xx reply (eg 407 Proxy Authentication Required). In the picture below you can see that such a message just goes through the proxy and moreover gets into the *request_route* section. I expect this SIP ACK to be consumed by the sl module without hitting script logic. [image: image.png] I put the part below to the very top of the *request_route* section: *request_route* { if ( is_method("ACK") ) { t_check_trans(); $var(error) = $rc; xlog("L_ERR", "[CATCH_ACK] m=$rm cseq=$cs ru=$ru err=$var(error) [$ci]"); } .... And as a result, I detected in syslog: May 7 16:15:34 test-edge /usr/sbin/kamailio[11642]: ERROR: <script>: [CATCH_ACK] m=ACK cseq=153 ru=sip:mod_sofia@10.0.7.3:5060 err=-1 [051e7c50-0b10-1239-2996-001dd8b71cb2] *SIP re-INVITE (hold) from Phone:* 2020/05/07 16:15:34.629973 176.6.4.6:1024 -> 185.9.7.7:5060 INVITE sip:mod_sofia@10.0.7.3:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.11.111:5060 ;branch=z9hG4bK00475de2da8eea118ec67caaaddc98fb;rport Route: <sip:185.9.7.7;r2=on;lr=on;did=f98.f3f4> Route: <sip:10.0.7.5;r2=on;lr=on;did=f98.f3f4> Route: <sip:10.0.7.6;lr=on;did=f98.fbe> From: <sip:312222222222@10.0.7.6>;tag=00dfd3d8da8eea118ec67caaaddc98fb To: "Denys VOIP" <sip:5008@185.9.7.7>;tag=54Q0XNHgXBUvp Call-ID: 051e7c50-0b10-1239-2996-001dd8b71cb2 CSeq: 153 INVITE Contact: <sip:312222222222@192.168.11.111:5060 ;gr=00DCB21F-BD8E-EA11-8E88-7CAAADDC98FB> Content-Type: application/sdp Allow: INVITE, ACK, BYE, CANCEL, INFO, MESSAGE, NOTIFY, OPTIONS, REFER, UPDATE, PRACK Max-Forwards: 70 Supported: 100rel, replaces, from-change, gruu User-Agent: SIPPER for PhonerLite Content-Length: 313 v=0 o=- 3858283927 2 IN IP4 192.168.11.111 s=SIPPER for PhonerLite c=IN IP4 192.168.11.111 t=0 0 m=audio 5062 RTP/AVP 8 0 9 107 101 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:9 G722/8000 a=rtpmap:107 opus/48000/2 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=ssrc:782125221 a=sendonly *SIP 407 from Kamailio:* 2020/05/07 16:15:34.632298 185.9.7.7:5060 -> 176.6.4.6:1024 SIP/2.0 407 Proxy Authentication Required Via: SIP/2.0/UDP 192.168.11.111:5060 ;branch=z9hG4bK00475de2da8eea118ec67caaaddc98fb;rport=1024;received=176.6.4.6 From: <sip:312222222222@10.0.7.6>;tag=00dfd3d8da8eea118ec67caaaddc98fb To: "Denys VOIP" <sip:5008@185.9.7.7>;tag=54Q0XNHgXBUvp Call-ID: 051e7c50-0b10-1239-2996-001dd8b71cb2 CSeq: 153 INVITE Proxy-Authenticate: Digest realm="185.9.7.7", nonce="XrQaXjfjyrftyrtiyrft7uO" Server: kamailio (5.2.2 (x86_64/linux)) Content-Length: 0 *SIP ACK from Phone:* 2020/05/07 16:15:34.672872 176.6.4.6:1024 -> 185.9.7.7:5060 ACK sip:mod_sofia@10.0.7.3:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.11.111:5060 ;branch=z9hG4bK00475de2da8eea118ec67caaaddc98fb;rport Route: <sip:185.9.7.7;r2=on;lr=on;did=f98.f3f4> Route: <sip:10.0.7.5;r2=on;lr=on;did=f98.f3f4> Route: <sip:10.0.7.6;lr=on;did=f98.fbe> From: <sip:312222222222@10.0.7.6>;tag=00dfd3d8da8eea118ec67caaaddc98fb To: "Denys VOIP" <sip:5008@185.9.7.7>;tag=54Q0XNHgXBUvp Call-ID: 051e7c50-0b10-1239-2996-001dd8b71cb2 CSeq: 153 ACK Content-Length: 0 *SIP ACK (unwanted) from Kamailio to Core:* 2020/05/07 16:15:34.675546 10.0.7.5:5060 -> 10.0.7.6:5060 ACK sip:mod_sofia@10.0.7.3:5060 SIP/2.0 Max-Forwards: 10 Via: SIP/2.0/UDP 10.0.7.5;branch=z9hG4bK0d46.c33c3556c3cffbac49e717352b3575f6.0 Via: SIP/2.0/UDP 192.168.11.111:5060 ;received=176.6.4.6;branch=z9hG4bK00475de2da8eea118ec67caaaddc98fb;rport=1024 Route: <sip:10.0.7.6;lr=on;did=f98.fbe> From: <sip:312222222222@10.0.7.6>;tag=00dfd3d8da8eea118ec67caaaddc98fb To: "Denys VOIP" <sip:5008@185.9.7.7>;tag=54Q0XNHgXBUvp Call-ID: 051e7c50-0b10-1239-2996-001dd8b71cb2 CSeq: 153 ACK Content-Length: 0 loose-route: done *IP addresses and call-flow:* Core (10.0.7.6) --> [ Kamailio (10.0.7.5) -> Kamailio (185.9.7.7) ] --> Phone (176.6.4.6) [root@test-edge kamailio]$ kamailio -v version: kamailio 5.2.2 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 19:29:40 Jun 20 2019 with gcc 4.8.5 -- BR, Denys Pozniak

2 1

kamdbctl create - failing create kamailio database on secfilter table action column default value
by Voip support 11 May '20

11 May '20

Hello Community, I had created for my solution an installer using ansible. It worked great all the time but suddenly it started to crash on step where i run the command : kamdbctl create root@nlb:/home/nlb# kamdbctl create -e \E[37;33mINFO: creating database kamailio ... mysql: [Warning] Using a password on the command line interface can be insecure. -e \E[37;33mINFO: granting privileges to database kamailio ... mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. -e \E[37;33mINFO: creating standard tables into kamailio ... mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. -e \E[37;33mINFO: Core Kamailio tables succesfully created. -e \E[37;33mINFO: creating presence tables into kamailio ... mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. -e \E[37;33mINFO: Presence tables succesfully created. -e \E[37;33mINFO: creating extra tables into kamailio ... mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. mysql: [Warning] Using a password on the command line interface can be insecure. ERROR 1067 (42000) at line 1: Invalid default value for 'action' -e \E[37;31mERROR: Creating extra tables failed at secfilter! Its saying some error about 'action' column default value. The installation is made using ubuntu 16.04 from repository: deb http://deb.kamailio.org/kamailio53 xenial main deb-src http://deb.kamailio.org/kamailio53 xenial main Maybe the issue is this change i dont know (it mention default value 0 for action column): https://github.com/kamailio/kamailio/commit/b0f1486f8a656922aac02020c9e3141… Best regards, Tom

2 1

DMQ Module Crash
by Ilie Soltanici 11 May '20

11 May '20

Hello, I'm trying to replicate a hash table to another 2 nodes by using DMQ Module. That's the related configuration: loadmodule "tm.so" loadmodule "tmx.so" loadmodule "dialog.so" loadmodule "dmq.so" loadmodule "htable.so" modparam("dmq", "server_address", "sip:MY_INTERNAL_IP_ADDR:5062") modparam("dmq", "notification_address", "sip:dmq.domain.local:5062") modparam("dmq", "multi_notify", 1) modparam("dmq", "num_workers", 4) modparam("dmq", "ping_interval", 90) modparam("htable", "enable_dmq", 1) modparam("htable", "dmq_init_sync", 1) modparam("htable", "htable", "test=>size=10;initval=0;dmqreplicate=1;") if(is_method("KDMQ")) { dmq_handle_message(); exit; } After starting Kamailio - everything seems to be working fine, Kamailio is able to discover other nodes and replications is working fine, until after a few minutes I'm getting such errors in the Kamailio Log file: May 8 17:14:26 kamailio kamailio[28064]: CRITICAL: <core> [core/mem/q_malloc.c:521]: qm_free(): BUG: freeing already freed pointer (0x7f0ac62493e0), called from dialog: dlg_var.c: free_local_varlist(145), first free dialog: dlg_var.c: set_dlg_variable_unsafe(205) - ignoring Then, if I'm getting any SIP messages from any Device - Kamailio is crashing with the following info in the log file: May 8 16:03:19 kamailio kam[10963]: CRITICAL: {REGISTER (1) | Seq=45534 | Source IP=192.168.1.5 (tcp) | Call ID=Kyb-KJjf.U9ttdOwQNYu6mUWCKb2bvk7} <core> [core/mem/q_malloc.c:150]: qm_debug_check_frag(): BUG: qm: prev. fragm. tail overwritten(0, 0)[0x7f62cc746a10:0x7f62cc746a48]! Memory allocator was called from dialog: dlg_var.c:147. Fragment marked by dialog: dlg_var.c:108. Exec from core/mem/q_malloc.c:511. May 8 16:03:21 kamailio kam[10966]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 59 May 8 16:03:21 kamailio kam[10966]: DEBUG: <core> [core/tcp_main.c:3825]: handle_ser_child(): dead child 37, pid 10963 (shutting down?) May 8 16:03:21 kamailio kam[10966]: DEBUG: <core> [core/io_wait.h:599]: io_watch_del(): DBG: io_watch_del (0xa9e1c0, 59, -1, 0x0) fd_no=48 called May 8 16:03:21 kamailio kam[10966]: DEBUG: <core> [core/tcp_main.c:3593]: handle_tcp_child(): dead tcp child 1 (pid 10963, no 37) (shutting down?) May 8 16:03:21 kamailio kam[10966]: DEBUG: <core> [core/io_wait.h:599]: io_watch_del(): DBG: io_watch_del (0xa9e1c0, 62, -1, 0x0) fd_no=47 called May 8 16:03:21 kamailio kam[10919]: ALERT: <core> [main.c:767]: handle_sigs(): child process 10963 exited by a signal 6 May 8 16:03:21 kamailio kam[10919]: ALERT: <core> [main.c:770]: handle_sigs(): core was generated May 8 16:03:21 kamailio kam[10919]: INFO: <core> [main.c:792]: handle_sigs(): terminating due to SIGCHLD May 8 16:03:21 kamailio kam[10919]: DEBUG: <core> [main.c:794]: handle_sigs(): terminating due to SIGCHLD May 8 16:03:21 kamailio kam[10966]: INFO: <core> [main.c:847]: sig_usr(): signal 15 received This is what i got from the dump core file: uri = {user = {s = 0x3 <Address 0x3 out of bounds>, len = -264573566}, passwd = {s = 0x788 <Address 0x788 out of bounds>, len = 8208}, host = {s = 0x393100000000 <Address 0x393100000000 out of bounds>, len = 1588950199}, port = {s = 0x2 <Address 0x2 out of bounds>, len = 24086112}, params = {s = 0x7ffcbb1600c0 "\200", len = -261173312}, sip_params = {s = 0x7ffcbb1601a8 "\300\317n\360b\177", len = 24086112}, headers = {s = 0x0, len = -261173312}, port_no = 424, proto = 47894, type = 32764, flags = (URI_SIP_USER_PHONE | unknown: 4031456108), transport = { s = 0x16f88cc "16:03:19 kamailio[10963]: CRITICAL: {REGISTER (1) | Seq=45534 | Source IP=192.168.1.5 (tcp) | Call ID=Kyb-KJjf.U9ttdOwQNYu6mUWCKb2bvk7} <core> [core/mem/q_malloc.c:150]: qm_debug_check_frag(): BUG: qm: pr"..., len = -261163168}, ttl = { s = 0x8 <Address 0x8 out of bounds>, len = -263517049}, user_param = { s = 0x16f88cc "16:03:19 kamailio[10963]: CRITICAL: {REGISTER (1) | Seq=45534 | Source IP=192.168.1.5 (tcp) | Call ID=Kyb-KJjf.U9ttdOwQNYu6mUWCKb2bvk7} <core> [core/mem/q_malloc.c:150]: qm_debug_check_frag(): BUG: qm: pr"..., len = -264350686}, maddr = { s = 0x3336393031000080 <Address 0x3336393031000080 out of bounds>, len = 8187}, method = {s = 0x0, len = 24086112}, lr = {s = 0x820ce8 "%s: %s%s(): cseq <%.*s>: <%.*s> <%.*s>\n", len = -1156185384}, r2 = {s = 0xb <Address 0xb out of bounds>, len = 21}, gr = { s = 0xffffffff <Address 0xffffffff out of bounds>, len = -264780793}, transport_val = {s = 0x1ff4 <Address 0x1ff4 out of bounds>, len = 24086720}, ttl_val = {s = 0x7f62f06f0760 <main_arena> "", len = 128}, user_param_val = {s = 0x16f88b0 "`\002", len = 144}, maddr_val = {s = 0x15 <Address 0x15 out of bounds>, len = -264573566}, method_val = {s = 0x788 <Address 0x788 out of bounds>, len = 8208}, lr_val = {s = 0x0, len = 1588950199}, r2_val = {s = 0x2 <Address 0x2 out of bounds>, len = 24086112}, gr_val = { s = 0x7ffcbb1601f0 "\006", len = -261173312}} next_hop = {user = {s = 0x0, len = 0}, passwd = {s = 0x0, len = 0}, host = {s = 0x7f62f06eef20 <_nl_C_LC_NUMERIC+32> "", len = 0}, port = {s = 0x0, len = 0}, params = {s = 0x7f620000000b <Address 0x7f620000000b out of bounds>, len = 0}, sip_params = { s = 0x7f62f03762cd <vfprintf+19661> "\200\275\360\372\377\377", len = 0}, headers = {s = 0x0, len = -1}, port_no = 25293, proto = 61495, type = 32610, flags = (URI_USER_NORMALIZE | URI_SIP_USER_PHONE), transport = {s = 0x7ffcbb160038 "\267t\265^", len = 24086112}, ttl = {s = 0xffffffff <Address 0xffffffff out of bounds>, len = 0}, user_param = {s = 0x7d62e8 "%s: %.*s%s%s(): preparing to run routing scripts...\n", len = 11}, maddr = {s = 0xbd <Address 0xbd out of bounds>, len = 3440}, method = {s = 0x7d631c "", len = -263511186}, lr = {s = 0x16f88cc "16:03:19 kamailio[10963]: CRITICAL: {REGISTER (1) | Seq=45534 | Source IP=192.168.1.5 (tcp) | Call ID=Kyb-KJjf.U9ttdOwQNYu6mUWCKb2bvk7} <core> [core/mem/q_malloc.c:150]: qm_debug_check_frag(): BUG: qm: pr"..., len = -261163168}, r2 = { s = 0x8 <Address 0x8 out of bounds>, len = -263517049}, gr = { s = 0x16f88cc "16:03:19 kamailio[10963]: CRITICAL: {REGISTER (1) | Seq=45534 | Source IP=192.168.1.5 (tcp) | Call ID=Kyb-KJjf.U9ttdOwQNYu6mUWCKb2bvk7} <core> [core/mem/q_malloc.c:150]: qm_debug_check_frag(): BUG: qm: pr"..., len = -264350686}, transport_val = { s = 0x7d62ef "s%s%s(): preparing to run routing scripts...\n", len = 8187}, ttl_val = {s = 0x0, len = -264345823}, user_param_val = {s = 0x3000000010 <Address 0x3000000010 out of bounds>, len = -1156184608}, maddr_val = { s = 0x7ffcbb160520 "\341+:\213'H\027\203\341+\342ޙ>\356|", len = 21}, method_val = {s = 0x7ffcbb160250 "\023", len = -1156186080}, lr_val = {s = 0x7f62f06eef80 <_nl_C_LC_TIME> "r\036K\360b\177", len = -1156185648}, r2_val = {s = 0x17ff710 "IST", len = -1156186048}, gr_val = {s = 0x0, len = -1156186058}} u = 0x400001ff4 By disabling DMQ Module i haven't noticed any crashes or issues like that, so i suppose that Kamailio is crashing because of this module, but i can be wrong. I've tried with 2 versions of Kamailio (5.2.6 and 5.3.4), both of them having the same issue. Thanks

2 3

db_redis and PUA
by Carsten Bock 08 May '20

08 May '20

Hi, quick question: Did anyone ever attempt to use PUA with the new db_redis? If yes, could someone share the definition for this? Thanks, Carsten -- Carsten Bock I CTO & Founder ng-voice GmbH Trostbrücke 1 I 20457 Hamburg I Germany T +49 40 524 75 93-40 | M +49 179 2021244 I www.ng-voice.com Registry Office at Local Court Hamburg, HRB 120189 Managing Directors: Dr. David Bachmann, Carsten Bock

3 2

RTCP
by David Villasmil 08 May '20

08 May '20

Hello guys, We have clients/vendor who exchange RTP directly to each other. But we'd like to get RTCP packets (and proxy them to the other side). Is this at all possible? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

3 5

Kamailio with dispatcher and asterisks real time
by ospos web 08 May '20

08 May '20

Hi all folks, Hello people, I'm new and I've been reading, so I have some but not much knowledge. I must integrate as work, two asterisk to the kamailio, a month ago I started with the real time guide [1] with only one kamailio, register, start the call, etc.. I am with the basics and it works. Now I must put two asterisk and using dispatcher, but although I read the documentation of the module.. use it and so then configure a list of file (with the asterisk where to dispatch) and not in the database.. MY HELP REQUEST QUESTION: How do I use dispatcher in load balancing mode, but taking in consideration my already working realtime-asterisk worling setup? THE PROBLEM: since with what I did it simply sends the call to both asterisk. i setup only 4 easy steps.. load module, then setup params (where i set the asterisk lists by file, and not db) and then added a "ds_select_dst(1, 4);" before the "route(RELAY);" line. please help! as i know.. the ds_select_dst(1, 4); prepare wicht asterisk will be choose to use and then when the routing RELAY happends no cares if in the realtime previously guide are a main asterisk? right? NOTE: I know it's a big world... but I can't keep reading the kamailio theory, i must goon forward due i have to lear later once are property working.. [1] https://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb

3 5

secfilter table error
by Social Boh 07 May '20

07 May '20

Hello, any help with this error? ERROR 1067 (42000) at line 1: Invalid default value for 'action' ERROR: Creating extra tables failed at secfilter! Kamilio version 5.3.3 compiled from source. Thank you -- --- I'm SoCIaL, MayBe

2 4

Kamailio v5.3.4 Released
by Daniel-Constantin Mierla 06 May '20

06 May '20

Hello, Kamailio SIP Server v5.3.4 stable release is out. This is a maintenance release of the latest stable branch, 5.3, that includes fixes since the release of v5.3.3. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.3.x. Deployments running previous v5.3.x versions are strongly recommended to be upgraded to v5.3.4. For more details about version 5.3.4 (including links and guidelines to download the tarball or from GIT repository), visit: * https://www.kamailio.org/w/2020/05/kamailio-v5-3-4-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users