- sr-users - kamailio.org

dlflags interface deprecated
by AL S 13 Nov '18

13 Nov '18

Hi, We are running the old release of Kamailio 3.3.7 and getting the following notice log: kamailio: NOTICE: <core> [sr_module.c:627]: /usr/local/lib64/kamailio/modules_k/perl.so: exports dlflags interface is deprecated and it will not be supported in newer versions; consider using mod_register() instead Is there a way to fix this issue on the same Kamailio3.3.7 code? Thanks, AL

3 2

Execution Sequence of the Request_Route
by Abdulaziz Alghosh 13 Nov '18

13 Nov '18

Hello, I migrated from Kamailio 3.0.3 to Kamailio 5.1.4. and have two questions about the execution sequence of the Request_Route. The following condition trys to authenticate the first INVITE or REGISTER request which normally does not have the Authorization Header: route (auth) .. .. .. route[auth]{ if ( !proxy_authorize("myrealm", "subscriber") ) { proxy_challenge("myrealm", "0"); sl_reply_error(); exit; }; return; } For sure the Return Code of "proxy_authorize" will not be one (1) at the beginneing, so the proxy_challenge() will generate the "407 Proxy Authentication Required" request and the agent will send the INVITE or the REGISTER again with the Authorization-Header and the call or the registration attempt succeeds. During my observation to the new returned codes (values) of both proxy_authorize() and proxy_challenge() in Kamailio 5.1.4, I noticed the following differnet execution sequence of this "Request_Route". at Kamailio 3.0.3, and exactly after the proxy_challenge("myrealm", "0") command was executed, no more commands were excuted as if it jumped out of the if statement, and the proxy was wating for the new INVITE or REGISTER. Hence the sl_reply_error() did not send any error reply. I wrote several logging commad before and after the proxy_challenge("myrealm", "0"), so I am pretty sure that the proxy_challenge("myrealm", "0") is last excuted command to be excuted here. at Kamailio 5.1.4, the behaviour was more logical and the proxy executes commands which come under the proxy_challenge("myrealm", "0") like logging commands or sl_reply_error() which generates usually the error reply " 500 I'm terribly sorry, server error occurred". My first question is: May somebody explain this different behavior? My second Question: assume that the agent will send a wrong credentials and response, does the proxy_challenge("myrealm", "0") function terminate this dialouge with 401 Unauthorized Error or I must add the following "if condition" afterwards: if ( !proxy_authorize("myrealm", "subscriber") ) { proxy_challenge("myrealm", "0"); if (!$rc){ sl_reply_error(); '#### or I will be more specific sl_send_reply (code, reason) } exit; }; Thanks and best regards Abdulaziz Alghosh

2 1

Redirects - are q values required to implement serial forking?
by Mike Montgomery 12 Nov '18

12 Nov '18

We have a situation where we get a redirect from a carrier with a list of carriers to send the transaction to in the contact header. None of the carriers in the contact header have q values assigned. We have implemented our redirect handling logic using the UAC_REDIRECT module (get_redirects()) with help from TM module (t-load_contacts(), t_next_contact()). (failure_route code is at bottom of this note) We find that when we receive a contact header with q values, we can launch requests serially using t_next_contact() and individually work through the contact list until we get a positive response. When we get a redirect with no q values in the contact header we find that all contacts get loaded and launched in parallel. Although not stated in the documentation, it appears that in order to implement serial contact redirect handling, q values must be present in the contact header. Based on this assumption, and knowing that the redirecting carrier cannot include q values, we have attempted to modify the contact header and find that we are unable to add q values to the contact header. We have attempted without success to use remove_hf("Contact”) followed by append_hf("Contact: $(avp(contact)) \r\n”); where $(avp(contact)) is the avp where we have rewritten the contact header to include q values. Any guidance on how to handle this issue is appreciated. _________________________________________________________- Our failure route code: if (t_check_status("3[0-9][0-9]")) { xlog("L_INFO", "----> REDIRECT Contact Header --> $T_rpl($ct) --- Method $rm --- From $T_req($fu) --- To $T_req($tu) --- Destination $T_req($du) \n"); get_redirects("*:*"); if (!t_load_contacts()) { xlog("L_INFO", "-t_load_contacts() FAILED /n"); }; xlog("L_INFO", "####->LOAD CONTACT LIST $xavp(tm_contacts[0]=>uri) \n"); if (t_next_contacts()) { xlog("L_INFO", "-t_next_contact() loaded successfully /n"); xlog("L_INFO", "####-> NEXT CONTACT LIST $xavp(tm_contacts[0]=>uri) \n"); }; t_on_failure("serial"); if(t_relay()){ xlog("L_INFO","----->Relayed in MANAGE_FAILURE --- Method $rm --- Contact Header $ct \n"); }; exit; } else { xlog("L_INFO","-----> NO REDIRECT --- Method $rm --- Contact Header $ct \n"); exit; } failure_route["serial"] { xlog ("L_INFO", "Entered failure_route(serial) /n"); if (t_check_status("3[0-9][0-9]")) { xlog("L_INFO", "----> DOUBLE REDIRECT Contact Header --> $T_rpl($ct) --- Method $rm --- From $T_req($fu) --- To $T_req($tu) --- Destination $T_req($du) \n"); $xavp(tm_contacts[*]) = $null; xlog("L_INFO", "XXX-> tm_contacts reset to Null $xavp(tm_contacts[0]=>uri)\n"); get_redirects("*:*"); if (!t_load_contacts()) { xlog("L_INFO", "-t_load_contacts() FAILED /n"); }; xlog("L_INFO", "####-> LOAD 2 CONTACT LIST $xavp(tm_contacts[0]=>uri) \n"); } if (!t_next_contacts()) { exit; } xlog("L_INFO", "-t_next_contact() loaded successfully /n"); xlog("L_INFO", "####-> NEXT CONTACT LIST $xavp(tm_contacts[0]=>uri) \n"); t_on_failure("serial"); if(t_relay()){ xlog("L_INFO","----->Relayed in failure_route(serial) --- Method $rm --- Contact Header $ct \n"); }; } Best Regards, Mike Montgomery Principal, Trusted Technical Services, Inc. o - 919 924 4703 x3000 m - 919 539 6133

2 1

Adding Perl Module to kamailio-5.1.6
by AL S 12 Nov '18

12 Nov '18

I am trying to install Perl module on Ubuntu 18.04 / Kamailio kamailio-5.1.6 and getting the following response: $ sudo apt-get install kamailio-perl-modules Reading package lists... Done Building dependency tree Reading state information... Done kamailio-perl-modules is already the newest version (5.1.2-1ubuntu2). You might want to run 'apt --fix-broken install' to correct these. The following packages have unmet dependencies: kamailio-perl-modules : Depends: kamailio (= 5.1.2-1ubuntu2) but it is not installable E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution). Is there a better way to add perl module? PS: libperl-dev already installed. Thanks, AL

2 1

siptrace module doesn't close db connections
by Roman Dissauer 12 Nov '18

12 Nov '18

Hi, it seems that siptrace module doesn’t close db connections. I’m on Kamailio 5.1.4 from official debian stretch repository with postgresql db module enabled. siptrace config: modparam("siptrace", "db_url", DBURL) modparam("siptrace", "duplicate_uri", "sip:193.32.51.189:9060") modparam("siptrace", "hep_mode_on", 1) modparam("siptrace", "hep_version", 3) modparam("siptrace", "hep_capture_id", 1001) modparam("siptrace", "trace_mode", 1) Here you can see the open connections from the kamailio host: # select client_addr, state, query from pg_stat_activity where client_addr = '10.23.101.61'; client_addr | state | query --------------+-------+---------------------------------------------------------------- 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' (31 Zeilen) another example, other installation with same kamailio version 5.1.4: # select client_addr, state, query from pg_stat_activity where client_addr = '10.23.102.1'; client_addr | state | query -------------+-------+---------------------------------------------------------------- 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' (39 Zeilen) Thanks Roman

2 2

Single session start
by José Antonio Gutiérrez Delgado 12 Nov '18

12 Nov '18

Hi, I would like to know if it is possible to make the last register of a user the active register and if possible the only one. I'm with an Android application and sometimes I can not deregister properly before the new registration, for example when the network changes, so there are times when the hanging signals do not work correctly when there is more than one register for a user. Is it possible to avoid that there is more than one register for a user? Is it possible to configure the last register to delete the previous ones or to be a single register? Thanks in advance and I await your answers. -- José Antonio Gutiérrez Delgado Responsable técnico Oficina: (+34) 923040031 <http://www.arsoft-company.com/> *Este mensaje se dirige exclusivamente a su destinatario/s y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.* *Antes de imprimir, piensa si es necesario. Cuidar el medioambiente es tarea de todos.*

3 2

Custom authentication
by João Sávio 12 Nov '18

12 Nov '18

Hello! I was reading the documentation of Kamailio, And, although there are some authentication modules, I couldn't find a way to implement a custom authentication for SIP Register. Something that allows me, for example, to call a web server and returns if the user is authenticated, or the user data. Am I missing anything? Do you know if it's possible to do this using another way? Thanks João

2 2

high availability and load balancing
by eyas barhouk 10 Nov '18

10 Nov '18

hello dears, i'm using kamailio 5.1 as IMS , and i have the following servers: * p-cscf * i-cscf-1 ,icscf-2 * s-cscf-1,scscf-2 i need to do high availability and load balancing between my servers , but i have some questions like do i have to use keepalived or dispatcher module and what the benefits of each one of them ,and on load balancing method should i do it for the register requests or only for invite requests or just for every thing ?? if any one has an idea or any thing to guide me i will be thankful thanks in advance and regards

3 3

Client Registration and Call over Kamailio
by serkan celik 09 Nov '18

09 Nov '18

Hi all, I am using Kamailio as a proxy in front of a 3rd part Open IMS (Not IMS modules in kamailio). I have defined Kamailio as an outbound proxy in Soft clients(I have configured IMS users info in Soft Clients). When I send register from client to IMS, Register message is sent to IMS over Kamailio. Kamailio forwards this received Register to the 3rd party IMS. Finally the client is registered into IMS over Kamailio. However when I try to make a call from registered users (both registered over Kamailio), IMS sends 403 Forbidden - "Not Registered! You must register first with a S-CSCF" to Kamailio. When I debugged the issue I found the reason why IMS sends 403. When IMS receives an Invite message from Kamailio it checks whether source IP which Invite is sent registered or not. As I make registration over Kamailio without changing contact header, IMS registers the user with the contact IP (which is the client IP). So to make a call from Soft client (IMS users) over Kamailio I also need to register Kamailio source IP as well.To deal with the issue I have changed the contact address of Register message coming from Soft client with Kamailio IP on Kamailio. Then IMS registered Kamailio IP as a contact when registering IMS user. But this time when I make a call from Soft client over Kamailio, IMS sends Termination Invite to Kamailio. So to finalize the call Kamailio has to route this termination Invite to the terminating IMS user . Is there any better approach to overcome this issue. Which is the better approach to use Kamailio in front of IMS. I want to both register and make a call from Soft clients over Kamailio to the IMS. Regards, Serkan CELIK

3 5

systemd kamailio.service - RFC Wants=network-online.target
by Kevin Olbrich 08 Nov '18

08 Nov '18

Hi! The systemd kamailio.service file for debian (in my case, it's stretch) has the following unit options set: [Unit] > Description=Kamailio (OpenSER) - the Open Source SIP Server > After=network.target It would be better to change this to: [Unit] > Description=Kamailio (OpenSER) - the Open Source SIP Server > Wants=network-online.target > After=network-online.target Why? With network.target the service starts as soon as the network setup is started, not explicitly after configuring (=IP) it [1]. This creates a race condition on very fast hardware like mine (booting incl. all services takes 10s). Even with static IPs, kamailio often fails directly at boot because eth1 (connection to DB cluster) is not up. [I have never met this problem on systems which ran on HDDs.] Setting "network-online.target" as Wants + After makes sure, Kamailio is started after all interfaces are ready to serve. Units that strictly require a configured network connection should pull in > network-online.target (via a Wants= type dependency) and order themselves > after it. This target unit is intended to pull in a service that delays > further execution until the network is sufficiently set up. What precisely > this requires is left to the implementation of the network managing service. > Perfect example for this is the Shorewall package (firewall solution): [Unit] > Description=Shorewall IPv4 firewall > Wants=network-online.target > After=network-online.target > Conflicts=iptables.service firewalld.service RFC Kind regards Kevin [1] https://www.freedesktop.org/software/systemd/man/systemd.special.html

3 6

cfg_lock_helper(): lock set not initialized
by Kjeld Flarup 08 Nov '18

08 Nov '18

Hi What does this error actually mean? I get it with 5.1.4 Nov 6 13:27:02 scantronpbx /usr/sbin/kamailio[2149]: ERROR: cfgutils [cfgutils.c:708]: cfg_lock_helper(): lock set not initialized (attempt to do op: 1 on: u1) -- -------------------- Med Liberalistiske Hilsner ---------------------- Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49 Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk

2 1

Phone does not set "Expire-header" but "Contact expire", immediately expires
by Kevin Olbrich 07 Nov '18

07 Nov '18

Hi! I have a phone (Mitel 6930) that does not send an Expire-header but "expire" in Contact during REGISTER: Session Initiation Protocol (REGISTER) > Request-Line: REGISTER sip:pbx.example.com SIP/2.0 > Message Header > Via: SIP/2.0/TLS 192.168.6.16:5061;branch=xxxxxxxxxxxxxxxx;rport > Route: <sip:pbx.example.com;lr=lr;transport=tls> > Max-Forwards: 70 > From: "Example" <sip:121212_6666@pbx.example.com>;tag=b0cec92c3e > To: "Example" <sip:121212_6666@pbx.example.com> > Call-ID: aaaaaaaaaaaaaaaaa > CSeq: 1190442896 REGISTER > Accept-Language: de > Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, UPDATE, > PRACK, SUBSCRIBE, INFO, PUBLISH > Allow-Events: talk, hold, conference, LocalModeStatus > Contact: "Example" <sip:121212_6666@192.0.2.1:62336 > >;+sip.instance="<urn:uuid:00000000-0000-1000-8000-08000FB888F5>";expires=300 > Supported: path, gruu > User-Agent: Mitel 6930/5.0.0.2041 > Aastra-Line: 1 > Aastra-Mac: AAAAAAAAAAAA > Content-Length: 0 This results in successful register, kamailio forwards REGISTER to asterisk (endpoint registered) and immediatly kamailio sends a new REGISTER with Expire set to 0 to asterisk: Session Initiation Protocol (REGISTER) > Request-Line: REGISTER sip:192.168.99.112:5060 SIP/2.0 > Message Header > Via: SIP/2.0/UDP 192.168.99.111:5060 > ;branch=z9hG4bK9f9e.599cf243000000000000000000000000.0 > To: <sip:121212_6666@192.168.99.112> > From: <sip:121212_6666@192.168.99.112 > >;tag=7e4f6993bfbf831f6b016fea6683cdca-b98a > CSeq: 10 REGISTER > Call-ID: 2bc5fd1061b31723-1350(a)192.168.99.111 > Max-Forwards: 70 > Content-Length: 0 > User-Agent: kamailio (5.1.6 (x86_64/linux)) > Contact: <sip:121212_6666@192.168.99.111:5060> > Expires: 0 The phone is then unregistered - the phone also shows "no service". It looks like Kamailio generates this message on it's own (and I don't know why). I am still learning to implement kamailio as proxy. Reading the docs, I would expect Kamailio to automatically eval the correct parameter: > If the processed message contains neither Expires HFs nor expires contact > parameters, this value will be used for newly created usrloc records. [1] What did I miss? Phones which use the Expire-header are working fine. Kind regards Kevin [1] default_expires - http://www.kamailio.org/docs/modules/5.2.x/modules/registrar.html

3 10

busy lamp field
by Kevin Olbrich 06 Nov '18

06 Nov '18

Hi! Can someone share his kamailio.cfg with working busy lamp field in a kamailio-as-proxy scenario? My config is based on the example shipped with 5.1.x and asterisk as the backend. Calling works fine but PUBLISH / SUBSCRIBE is handled by kamailio itself. I am not sure but this might be the part where I should relay the request to asterisk(?): #!ifdef WITH_PRESENCE > if (!t_newtran()) { > sl_reply_error(); > exit; > } > if(is_method("PUBLISH")) { > handle_publish(); > t_release(); > } else if(is_method("SUBSCRIBE")) { > handle_subscribe(); > t_release(); > } > exit; > #!endif Currently the lights are "broken", some phones show them on, some off. Kind regards Kevin

2 1

Kamailio SQL error
by Marcos Pytel 06 Nov '18

06 Nov '18

Hello team! Im using kamailio in sipwise! I get this errors: Nov 5 11:51:34 sipwise proxy[1943]: ERROR: <core> [db_query.c:235]: db_do_insert_cmd(): error while submitting query Nov 5 11:51:34 sipwise proxy[1943]: ERROR: presence [subscribe.c:2514]: update_db_subs_timer(): unsuccessful sql insert Nov 5 11:51:34 sipwise proxy[1943]: ERROR: db_mysql [km_dbase.c:127]: db_mysql_submit_query(): driver error on query: Duplicate entry '6c23f96-0001-0003-0030(a)10.7.255.250-f3067022b00c564156251ba2f28f' for key 'active_watchers_idx' (1062) How can I fix it? Thank you! Marcos.

2 2

db_mongodb_get_columns(): field [username] not found in result iterator
by Denys Pozniak 06 Nov '18

06 Nov '18

Hello! I want to keep user location in mongodb, but Kamailio does not start well. Configuration: loadmodule "usrloc.so" loadmodule "db_mongodb.so" modparam("usrloc", "db_insert_null", 1) modparam("usrloc", "db_url", "mongodb://mongodb.test/kamailio") modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 30) modparam("usrloc", "desc_time_order", 1) Mongodb: rs0:PRIMARY> use kamailio switched to db kamailio rs0:PRIMARY> db.location.find() { "_id" : ObjectId("5be024d6b9d8febf4ae19681"), "name" : "location", "version" : 9, "columns" : { "id" : { "type" : "int", "default" : null, "null" : false }, "ruid" : { "type" : "string", "default" : "", "null" : false }, "username" : { "type" : "string", "default" : "", "null" : false }, "domain" : { "type" : "string", "default" : null, "null" : true }, "contact" : { "type" : "string", "default" : "", "null" : false }, "received" : { "type" : "string", "default" : null, "null" : true }, "path" : { "type" : "string", "default" : null, "null" : true }, "expires" : { "type" : "datetime", "default" : "2030-05-28 21:32:15", "null" : false }, "q" : { "type" : "double", "default" : 1, "null" : false }, "callid" : { "type" : "string", "default" : "Default-Call-ID", "null" : false }, "cseq" : { "type" : "int", "default" : 1, "null" : false }, "last_modified" : { "type" : "datetime", "default" : "2000-01-01 00:00:01", "null" : false }, "flags" : { "type" : "int", "default" : 0, "null" : false }, "cflags" : { "type" : "int", "default" : 0, "null" : false }, "user_agent" : { "type" : "string", "default" : "", "null" : false }, "socket" : { "type" : "string", "default" : null, "null" : true }, "methods" : { "type" : "int", "default" : null, "null" : true }, "instance" : { "type" : "string", "default" : null, "null" : true }, "reg_id" : { "type" : "int", "default" : 0, "null" : false }, "server_id" : { "type" : "int", "default" : 0, "null" : false }, "connection_id" : { "type" : "int", "default" : 0, "null" : false }, "keepalive" : { "type" : "int", "default" : 0, "null" : false }, "partition" : { "type" : "int", "default" : 0, "null" : false } } } { "_id" : ObjectId("5be02a77175610be86a1a589"), "username" : "dummy_user" } Syslog: Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: db_mongodb [mongodb_dbase.c:416]: db_mongodb_get_columns(): field [username] not found in result iterator Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: db_mongodb [mongodb_dbase.c:815]: db_mongodb_store_result(): failed to set the columns Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: db_mongodb [mongodb_dbase.c:1018]: db_mongodb_query(): failed to store result Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: db_mongodb [mongodb_dbase.c:1027]: db_mongodb_query(): failed to do the query Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: usrloc [udomain.c:457]: preload_udomain(): db_query failed Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: usrloc [usrloc_mod.c:430]: child_init(): child(1): failed to preload domain 'location' Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: <core> [core/sr_module.c:946]: init_mod_child(): error while initializing module usrloc (/usr/lib64/kamailio/modules/usrloc.so) (idx: 1 rank: 1 desc: [udp receiver child=0 sock=10.10.10.10:5060]) Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: ERROR: <core> [core/pt.c:340]: fork_process(): init_child failed for process 1, pid 21543, "udp receiver child=0 sock=10.10.10.10:5060" Nov 5 12:51:01 dev-rtpengine /usr/sbin/kamailio[21543]: CRITICAL: <core> [main.c:1607]: main_loop(): Cannot fork 2018-11-05T13:07:19.117+0100 D COMMAND [conn367] run command kamailio.$cmd { find: "version", filter: { table_name: "location" }, projection: { table_version: 1 } } 2018-11-05T13:07:19.118+0100 I COMMAND [conn367] command kamailio.version command: find { find: "version", filter: { table_name: "location" }, projection: { table_version: 1 } } planSummary: COLLSCAN keysExamined:0 docsExamined:2 cursorExhausted:1 numYields:0 nreturned:1 reslen:148 locks:{ Global: { acquireCount: { r: 2 } }, Database: { acquireCount: { r: 1 } }, Collection: { acquireCount: { r: 1 } } } protocol:op_query 0ms 2018-11-05T13:07:19.118+0100 D COMMAND [conn367] run command kamailio.$cmd { find: "location", filter: { username: "dummy_user" }, projection: { username: 1 } } 2018-11-05T13:07:19.119+0100 I COMMAND [conn367] command kamailio.location command: find { find: "location", filter: { username: "dummy_user" }, projection: { username: 1 } } planSummary: COLLSCAN keysExamined:0 docsExamined:2 cursorExhausted:1 numYields:0 nreturned:1 reslen:155 locks:{ Global: { acquireCount: { r: 2 } }, Database: { acquireCount: { r: 1 } }, Collection: { acquireCount: { r: 1 } } } protocol:op_query 0ms 2018-11-05T13:07:19.178+0100 D COMMAND [conn368] run command kamailio.$cmd { find: "location", filter: {}, projection: { username: 1, contact: 1, expires: 1, q: 1, callid: 1, cseq: 1, flags: 1, cflags: 1, user_agent: 1, received: 1, path: 1, socket: 1, methods: 1, last_modified: 1, ruid: 1, instance: 1, reg_id: 1, server_id: 1, connection_id: 1, keepalive: 1 } } 2018-11-05T13:07:19.179+0100 I COMMAND [conn368] command kamailio.location command: find { find: "location", filter: {}, projection: { username: 1, contact: 1, expires: 1, q: 1, callid: 1, cseq: 1, flags: 1, cflags: 1, user_agent: 1, received: 1, path: 1, socket: 1, methods: 1, last_modified: 1, ruid: 1, instance: 1, reg_id: 1, server_id: 1, connection_id: 1, keepalive: 1 } } planSummary: COLLSCAN keysExamined:0 docsExamined:2 cursorExhausted:1 numYields:0 nreturned:2 reslen:180 locks:{ Global: { acquireCount: { r: 2 } }, Database: { acquireCount: { r: 1 } }, Collection: { acquireCount: { r: 1 } } } protocol:op_query 0ms [root@dev-rtpengine kamailio]# kamailio -v version: kamailio 5.1.6 (x86_64/linux) 7d1964 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 7d1964 compiled on 11:10:15 Nov 4 2018 with gcc 4.8.5 -- BR, Denys Pozniak

2 5

Fwd: Fw: kamailio5.0.0 support presence
by chaos wu 06 Nov '18

06 Nov '18

Hi Kamailio expert, i want to use kamailio to simulate presence server, after receive subscribe, i need kamailio reply 200 OK, and then send out Notify, but now, it just forward the subscribe, don't reply, could you help check my cfg? thanks in advance. BRs

2 1

Development is open for future release v5.3.x series
by Daniel-Constantin Mierla 06 Nov '18

06 Nov '18

Hello, with the creation of branch 5.2 done this morning, the master branch is from now on open for adding new features, to be part of future release series v5.3.x. Any bug fix committed to master that applies to 5.2.x or older stable branches should be backported as usual with git cherry-pick to appropriate branches like 5.2 or 5.1. Expect that v5.2.0 will be released in about 2-3 weeks from now. Based on the workflow used during the past years, the next future release v5.3.0 should be out after another 8-10 months of development, plus 1-2 months of testing, so sometime in the summer or autumn of 2019. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com

1 0

Branch 5.2 has been created
by Daniel-Constantin Mierla 06 Nov '18

06 Nov '18

Hello, the branch 5.2 has been created, to be used for releasing v5.2.x series. To check out this branch, the following commands can be used: git clone https://github.com/kamailio/kamailio kamailio-5.2 cd kamailio-5.2 git checkout -b 5.2 origin/5.2 Pushing commits in this branch: git push origin 5.2:5.2 Note that 5.2 is an official stable branch, so only bug fixes, missing kemi exports (discuss on sr-dev if not sure) or improvements to documentation or helper tools can be pushed to this branch. As usual, if there is a bug fixed, commit and push first to master branch and then cherry pick to 5.2 branch. In few weeks, the first release from branch 5.2 will be out, respectively Kamailio v5.2.0. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com

1 0

Use of SCTP on public SIP server
by Kevin Olbrich 06 Nov '18

06 Nov '18

Hi! I read about the SCTP module for Kamailio and I am not sure if I should load it (currently I am not). Does this provide any benefit when Kamailio is used as proxy in front of Asterisk? At least from Wikipedia and the kamailio docs, it sounds like I can load it and it does it's magic. The multihomed part caught my attention. Kinds regards Kevin

3 2

How register with STORE_PLAINTEXT_PW=0
by José Antonio Gutiérrez Delgado 05 Nov '18

05 Nov '18

Hello, I recently discovered that the Kamailio database stores the user's password directly. I have found that by changing STORE_PLAINTEXT_PW = 0 in the configuration file, it stops storing the password in the database, but if I make this change I can no longer register the users in Kamailio. How should I register if I do not store the password? Have I missed a step? I have read that it is related to the HA1 field but it has not been clear how to do it. I hope your help. Thank you. -- José Antonio Gutiérrez Delgado Responsable técnico Oficina: (+34) 923040031 <http://www.arsoft-company.com/> *Este mensaje se dirige exclusivamente a su destinatario/s y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.* *Antes de imprimir, piensa si es necesario. Cuidar el medioambiente es tarea de todos.*

2 2

Storing in-progress dialogs in database
by jenus＠cyberchaos.nl 05 Nov '18

05 Nov '18

Hi all, I'm testing with the new dlg_db_load_callid function to replicate dialogs to another (standby) kamailio instance on failover. This works fine for calls that are connected. But i'm missing the dialogs in "ringing" state. Looks like dialogs are written to database by the dialog module when we receive the 200OK/ACK for the invite transaction. The result is that the call gets connected on the other kamailio instance but without a dialog. Is it possible to store the early_dialogs that are in rining state in the database? If that is not the case can i still create a dialog when i only receive the 200OK/ACK to the INVITE transaction (INVITE was processed by another instance) since TM is not aware of the INVITE transaction? I also tried to reject the 200OK to the INVITE in the on reply route, but running into the same issue that TM does not know the INVITE transaction. Thanks, Jan

2 1

string in ims_diameter_server
by Iman Mohammadi 04 Nov '18

04 Nov '18

We have a problem putting data to an AVP object. The data type is byte array (:byte[]). If we convert that array to an integer and put it in 'int32' field then the module just gets the first 4 bytes. If we convert it to base64 or hexString and put it in 'string' field then it treats it as a regular string. And any other field beside 'int32' and 'string' will be ignored. So the question is, how we put a byte array inside an AVP and send it to the module so the diameter gets the data as a byte array? Best Regards Iman Mohammadi

1 0

Branching GIT repository for 5.2.x release series
by Daniel-Constantin Mierla 03 Nov '18

03 Nov '18

Hello, if there is no other opinion, I am considering to create git branch 5.2 at the beginning of next week (likely on Monday evening), to be used for 5.2.x release series. >From that moment, the master branch can get new features and the appropriate bug fixes have to be backported to branch 5.2 as well. With this step, the first release in 5.2.x series, respectively v5.2.0, should be out in about 2-3 weeks. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com

2 1

Crash ims_diameter_server
by Iman Mohammadi 03 Nov '18

03 Nov '18

When the below format is sent from rest , kamailio crashes List[{ List[{ List[{ ]} ]} ]} (Json with 3 nested lists), With 2 lists it works properly, When diameter is translated to json with 3 lists by this module it also works properly, Json format is correct too. gdb: gdb) bt full #0 0x00007f5e23c4a11e in diameterserver_add_avp (m=0x0, d=0x7f5e1b5c2240 "", len=12, avp_code=431, flags=64, vendorid=0, data_do=2, func=0x7f5e23c51d6c <__FUNCTION__.20148> "parselist") at avp_helper.c:208 avp = 0x7f5e1b5c3bd0 __FUNCTION__ = "diameterserver_add_avp" #1 0x00007f5e23c4d0c8 in parselist (response=0x0, list=0x7fff9f21a8d0, item=0x11b67d0, level=2) at avp_helper.c:309 i = 1 flags = 64 x = "p\250!\237" avp_list = {head = 0x0, tail = 0x0} avp_list_s = {s = 0x7f5e1b5c2240 "", len = 12} __FUNCTION__ = "parselist" #2 0x00007f5e23c4cffc in parselist (response=0x7f5e1b5c3ab8, list=0x0, item=0x11b6550, level=1) at avp_helper.c:304 subitem = 0x11b67d0 i = 0 flags = 64 x = "\000\000\000" avp_list = {head = 0x0, tail = 0x0} avp_list_s = {s = 0x7fff9f21a8f0 "@\251!\237\377\177", len = 600070897} __FUNCTION__ = "parselist" #3 0x00007f5e23c4db3a in addAVPsfromJSON (response=0x7f5e1b5c3ab8, json=0x7f5e23e53950 <responsejson>) at avp_helper.c:349 subitem = 0x11b6550 i = 4 __FUNCTION__ = "addAVPsfromJSON" root = 0x11b4210 #4 0x00007f5e23c3fbdb in callback_cdp_request (request_in=0x7f5e1b5c19b0, param=0x0) at ims_diameter_server.c:193 fmsg = 0xab7840 <_faked_msg> backup_rt = 1 ctx = {rec_lev = 0, run_flags = 0, last_retcode = 1, jmp_env = {{__jmpbuf = {1, -5713032302318786866, 7971288, 7971288, 140042162528420, 0, -5713032302339758386, 5712822384154044110}, __mask_was_saved = 0, __saved_mask = {__val = { 140735863172072, 127, 0, 140042162532340, 140042389578761, 4222451713, 140042162532340, 140042162532340, 140042162532340, 140042162532340, 140042162532358, 140042162532467, 140042162532340, 140042162532467, 0, 0}}}}} response = 0x7f5e1b5c3ab8 __FUNCTION__ = "callback_cdp_request" #5 0x00007f5e24a705c0 in api_callback (p=0x7f5e1b598f50, msg=0x7f5e1b5c19b0, ptr=0x0) at api_process.c:83 t = 0x7f5e1b598f50 auto_drop = 32767 h = 0x7f5e1b5b3358 ---Type <return> to continue, or q <return> to quit--- x = {type = (unknown: 2669784000), handler = {requestHandler = 0x7f5e23c3eed1 <callback_cdp_request>, responseHandler = 0x7f5e23c3eed1 <callback_cdp_request>}, param = 0x3ee9f21ac10, next = 0x7f5e1b5988b8, prev = 0x19f210069} type = REQUEST_HANDLER rsp = 0x7f5e1b5c19b0 __FUNCTION__ = "api_callback" #6 0x00007f5e24a857d7 in worker_process (id=5) at worker.c:346 t = {p = 0x7f5e1b598f50, msg = 0x7f5e1b5c19b0} cb = 0x7f5e1b59df30 r = 128 __FUNCTION__ = "worker_process" #7 0x00007f5e24a62a8e in diameter_peer_start (blocking=0) at diameter_peer.c:242 pid = 0 k = 5 p = 0x36 __FUNCTION__ = "diameter_peer_start" #8 0x00007f5e24a559bc in cdp_child_init (rank=0) at cdp_mod.c:243 __FUNCTION__ = "cdp_child_init" #9 0x0000000000547e54 in init_mod_child (m=0x7f5e28656fb8, rank=0) at core/sr_module.c:943 __FUNCTION__ = "init_mod_child" #10 0x0000000000547b16 in init_mod_child (m=0x7f5e28657c38, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #11 0x0000000000547b16 in init_mod_child (m=0x7f5e28658010, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #12 0x0000000000547b16 in init_mod_child (m=0x7f5e28658790, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #13 0x0000000000547b16 in init_mod_child (m=0x7f5e28658d68, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #14 0x00000000005481e6 in init_child (rank=0) at core/sr_module.c:970 No locals. #15 0x00000000004250f5 in main_loop () at main.c:1701 i = 8 pid = 1964 si = 0x0 si_desc = "udp receiver child=7 sock=10.25.5.23:5060\000y\000\000\000\000\000x\333i(^\177\000\000@\264!\237\377\177", '\000' <repeats 18 times>, "`\263!\237\377\177\000\000\347L\340(^\177\000\000\360\260!\237\377\177\000\000\060\000\000\000\060\000\000\000\260\261!\237\377\177\000\000\350\226i(^\177\000" nrprocs = 8 ---Type <return> to continue, or q <return> to quit--- woneinit = 1 __FUNCTION__ = "main_loop" #16 0x000000000042b99b in main (argc=13, argv=0x7fff9f21b448) at main.c:2638 cfg_stream = 0x111c020 c = -1 r = 0 tmp = 0x7fff9f21bf69 "" tmp_len = 32606 port = 693647725 proto = 0 options = 0x74cd90 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 898203166 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7fff9f21b300 p = 0x7fff9f21b4b8 "\207\277!\237\377\177" st = {st_dev = 15, st_ino = 13240, st_nlink = 2, st_mode = 16877, st_uid = 110, st_gid = 116, __pad0 = 0, st_rdev = 0, st_size = 60, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1540797448, tv_nsec = 544589798}, st_mtim = {tv_sec = 1540797905, tv_nsec = 662909589}, st_ctim = {tv_sec = 1540798045, tv_nsec = 563947001}, __glibc_reserved = {0, 0, 0}} __FUNCTION__ = "main" (gdb) (gdb) Where is problem? Thanks

3 4

Store TLS handshake date from Kamailio to an external DB
by Toffi Bossol 02 Nov '18

02 Nov '18

Dear community, I am new in Kamailio hence the following question: Does any one know how to tell Kamailio to store the TLS session data in an external DB? Many Thanks in advance! BR; Toffi

3 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users