- sr-users - kamailio.org

How register with STORE_PLAINTEXT_PW=0
by José Antonio Gutiérrez Delgado 05 Nov '18

05 Nov '18

Hello, I recently discovered that the Kamailio database stores the user's password directly. I have found that by changing STORE_PLAINTEXT_PW = 0 in the configuration file, it stops storing the password in the database, but if I make this change I can no longer register the users in Kamailio. How should I register if I do not store the password? Have I missed a step? I have read that it is related to the HA1 field but it has not been clear how to do it. I hope your help. Thank you. -- José Antonio Gutiérrez Delgado Responsable técnico Oficina: (+34) 923040031 <http://www.arsoft-company.com/> *Este mensaje se dirige exclusivamente a su destinatario/s y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.* *Antes de imprimir, piensa si es necesario. Cuidar el medioambiente es tarea de todos.*

2 2

Storing in-progress dialogs in database
by jenus＠cyberchaos.nl 05 Nov '18

05 Nov '18

Hi all, I'm testing with the new dlg_db_load_callid function to replicate dialogs to another (standby) kamailio instance on failover. This works fine for calls that are connected. But i'm missing the dialogs in "ringing" state. Looks like dialogs are written to database by the dialog module when we receive the 200OK/ACK for the invite transaction. The result is that the call gets connected on the other kamailio instance but without a dialog. Is it possible to store the early_dialogs that are in rining state in the database? If that is not the case can i still create a dialog when i only receive the 200OK/ACK to the INVITE transaction (INVITE was processed by another instance) since TM is not aware of the INVITE transaction? I also tried to reject the 200OK to the INVITE in the on reply route, but running into the same issue that TM does not know the INVITE transaction. Thanks, Jan

2 1

string in ims_diameter_server
by Iman Mohammadi 04 Nov '18

04 Nov '18

We have a problem putting data to an AVP object. The data type is byte array (:byte[]). If we convert that array to an integer and put it in 'int32' field then the module just gets the first 4 bytes. If we convert it to base64 or hexString and put it in 'string' field then it treats it as a regular string. And any other field beside 'int32' and 'string' will be ignored. So the question is, how we put a byte array inside an AVP and send it to the module so the diameter gets the data as a byte array? Best Regards Iman Mohammadi

1 0

Branching GIT repository for 5.2.x release series
by Daniel-Constantin Mierla 03 Nov '18

03 Nov '18

Hello, if there is no other opinion, I am considering to create git branch 5.2 at the beginning of next week (likely on Monday evening), to be used for 5.2.x release series. >From that moment, the master branch can get new features and the appropriate bug fixes have to be backported to branch 5.2 as well. With this step, the first release in 5.2.x series, respectively v5.2.0, should be out in about 2-3 weeks. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference -- www.kamailioworld.com Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com

2 1

Crash ims_diameter_server
by Iman Mohammadi 03 Nov '18

03 Nov '18

When the below format is sent from rest , kamailio crashes List[{ List[{ List[{ ]} ]} ]} (Json with 3 nested lists), With 2 lists it works properly, When diameter is translated to json with 3 lists by this module it also works properly, Json format is correct too. gdb: gdb) bt full #0 0x00007f5e23c4a11e in diameterserver_add_avp (m=0x0, d=0x7f5e1b5c2240 "", len=12, avp_code=431, flags=64, vendorid=0, data_do=2, func=0x7f5e23c51d6c <__FUNCTION__.20148> "parselist") at avp_helper.c:208 avp = 0x7f5e1b5c3bd0 __FUNCTION__ = "diameterserver_add_avp" #1 0x00007f5e23c4d0c8 in parselist (response=0x0, list=0x7fff9f21a8d0, item=0x11b67d0, level=2) at avp_helper.c:309 i = 1 flags = 64 x = "p\250!\237" avp_list = {head = 0x0, tail = 0x0} avp_list_s = {s = 0x7f5e1b5c2240 "", len = 12} __FUNCTION__ = "parselist" #2 0x00007f5e23c4cffc in parselist (response=0x7f5e1b5c3ab8, list=0x0, item=0x11b6550, level=1) at avp_helper.c:304 subitem = 0x11b67d0 i = 0 flags = 64 x = "\000\000\000" avp_list = {head = 0x0, tail = 0x0} avp_list_s = {s = 0x7fff9f21a8f0 "@\251!\237\377\177", len = 600070897} __FUNCTION__ = "parselist" #3 0x00007f5e23c4db3a in addAVPsfromJSON (response=0x7f5e1b5c3ab8, json=0x7f5e23e53950 <responsejson>) at avp_helper.c:349 subitem = 0x11b6550 i = 4 __FUNCTION__ = "addAVPsfromJSON" root = 0x11b4210 #4 0x00007f5e23c3fbdb in callback_cdp_request (request_in=0x7f5e1b5c19b0, param=0x0) at ims_diameter_server.c:193 fmsg = 0xab7840 <_faked_msg> backup_rt = 1 ctx = {rec_lev = 0, run_flags = 0, last_retcode = 1, jmp_env = {{__jmpbuf = {1, -5713032302318786866, 7971288, 7971288, 140042162528420, 0, -5713032302339758386, 5712822384154044110}, __mask_was_saved = 0, __saved_mask = {__val = { 140735863172072, 127, 0, 140042162532340, 140042389578761, 4222451713, 140042162532340, 140042162532340, 140042162532340, 140042162532340, 140042162532358, 140042162532467, 140042162532340, 140042162532467, 0, 0}}}}} response = 0x7f5e1b5c3ab8 __FUNCTION__ = "callback_cdp_request" #5 0x00007f5e24a705c0 in api_callback (p=0x7f5e1b598f50, msg=0x7f5e1b5c19b0, ptr=0x0) at api_process.c:83 t = 0x7f5e1b598f50 auto_drop = 32767 h = 0x7f5e1b5b3358 ---Type <return> to continue, or q <return> to quit--- x = {type = (unknown: 2669784000), handler = {requestHandler = 0x7f5e23c3eed1 <callback_cdp_request>, responseHandler = 0x7f5e23c3eed1 <callback_cdp_request>}, param = 0x3ee9f21ac10, next = 0x7f5e1b5988b8, prev = 0x19f210069} type = REQUEST_HANDLER rsp = 0x7f5e1b5c19b0 __FUNCTION__ = "api_callback" #6 0x00007f5e24a857d7 in worker_process (id=5) at worker.c:346 t = {p = 0x7f5e1b598f50, msg = 0x7f5e1b5c19b0} cb = 0x7f5e1b59df30 r = 128 __FUNCTION__ = "worker_process" #7 0x00007f5e24a62a8e in diameter_peer_start (blocking=0) at diameter_peer.c:242 pid = 0 k = 5 p = 0x36 __FUNCTION__ = "diameter_peer_start" #8 0x00007f5e24a559bc in cdp_child_init (rank=0) at cdp_mod.c:243 __FUNCTION__ = "cdp_child_init" #9 0x0000000000547e54 in init_mod_child (m=0x7f5e28656fb8, rank=0) at core/sr_module.c:943 __FUNCTION__ = "init_mod_child" #10 0x0000000000547b16 in init_mod_child (m=0x7f5e28657c38, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #11 0x0000000000547b16 in init_mod_child (m=0x7f5e28658010, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #12 0x0000000000547b16 in init_mod_child (m=0x7f5e28658790, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #13 0x0000000000547b16 in init_mod_child (m=0x7f5e28658d68, rank=0) at core/sr_module.c:939 __FUNCTION__ = "init_mod_child" #14 0x00000000005481e6 in init_child (rank=0) at core/sr_module.c:970 No locals. #15 0x00000000004250f5 in main_loop () at main.c:1701 i = 8 pid = 1964 si = 0x0 si_desc = "udp receiver child=7 sock=10.25.5.23:5060\000y\000\000\000\000\000x\333i(^\177\000\000@\264!\237\377\177", '\000' <repeats 18 times>, "`\263!\237\377\177\000\000\347L\340(^\177\000\000\360\260!\237\377\177\000\000\060\000\000\000\060\000\000\000\260\261!\237\377\177\000\000\350\226i(^\177\000" nrprocs = 8 ---Type <return> to continue, or q <return> to quit--- woneinit = 1 __FUNCTION__ = "main_loop" #16 0x000000000042b99b in main (argc=13, argv=0x7fff9f21b448) at main.c:2638 cfg_stream = 0x111c020 c = -1 r = 0 tmp = 0x7fff9f21bf69 "" tmp_len = 32606 port = 693647725 proto = 0 options = 0x74cd90 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 898203166 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7fff9f21b300 p = 0x7fff9f21b4b8 "\207\277!\237\377\177" st = {st_dev = 15, st_ino = 13240, st_nlink = 2, st_mode = 16877, st_uid = 110, st_gid = 116, __pad0 = 0, st_rdev = 0, st_size = 60, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1540797448, tv_nsec = 544589798}, st_mtim = {tv_sec = 1540797905, tv_nsec = 662909589}, st_ctim = {tv_sec = 1540798045, tv_nsec = 563947001}, __glibc_reserved = {0, 0, 0}} __FUNCTION__ = "main" (gdb) (gdb) Where is problem? Thanks

3 4

Store TLS handshake date from Kamailio to an external DB
by Toffi Bossol 02 Nov '18

02 Nov '18

Dear community, I am new in Kamailio hence the following question: Does any one know how to tell Kamailio to store the TLS session data in an external DB? Many Thanks in advance! BR; Toffi

3 7

Installing rtpengine from RPM on CentOS
by Pan Christensen 02 Nov '18

02 Nov '18

Hello! According to https://github.com/sipwise/rtpengine/blob/master/el/README.el.md , we should be able to install rtpengine from a CentOS repository using yum. We're unable to find the packages. Any suggestions? Pan B. Christensen Developer Phonect AS Mail: pan.christensen(a)phonect.no<mailto:pan.christensen@phonect.no> + 47 41 88 88 00 [mail_footer]

5 5

Parse Header error when send Register to P-CSCF using ims-pcscf
by Hưng Nguyễn Tiến 02 Nov '18

02 Nov '18

Hi, i'm newbie in kamailio, I tried installed ims kamailio from ng-repository packages, Then when I tried to send register to SIP server using SIPp, I received this log [Proxy-CSCF][28505]: ERROR: <core> [core/parser/msg_parser.c:331]: parse_headers(): bad header field [(null)] [Proxy-CSCF][28500]: ERROR: <core> [core/parser/msg_parser.c:331]: parse_headers(): bad header field [(null)] [Proxy-CSCF][28496]: WARNING: <core> [core/receive.c:192]: receive_msg(): parsing relevant headers failed [Proxy-CSCF][28505]: message repeated 2 times: [ WARNING: <core> [core/receive.c:192]: receive_msg(): parsing relevant headers failed] [Proxy-CSCF][28492]: ERROR: <core> [core/parser/msg_parser.c:675]: parse_msg(): ERROR: parse_msg: message=<#002#020#002#021#023�#023��z'��z'#006��[%�#007> Thank you -- Nguyễn Tiến Hưng

2 1

Diversion headers access and message too long error
by Joan Salvatella 01 Nov '18

01 Nov '18

Hello, We are working on a project that's using a Twilio SIP trunk that diverts calls from the PSTN to our cluster that is hosting two active-active Kamailio 5.1 instances that redirect traffic to several Asterisk 15.4 instances. On this setup we are facing 2 issues: - *Diversion headers access: *Currently, Kamailio only supports access to the last diversion header but since we are receiving traffic from Twilio (it sets the last Diversion header) we are unable to see if the caller was diverted to our SIP trunk. Is there a workaround for this? Any external module that would support this use case? - *Message Too Long Error:* Since Twilio uses long URIs to define its resources, the SIP messages being handled by Kamailio are sometimes too big and generate a "Message Too Long error". I have been able to temporarily patch this removing unused headers using remove_hf_re and remove_hf but it still fails from time to time. Is there a way to split the UDP packet to mitigate this issue? or what other options could be considered? Thanks and regards,

3 5

[CentOS 7] Kamailio 5.1.x mongodb package missing in OpenSUSE repo.
by Denys Pozniak 01 Nov '18

01 Nov '18

Hello! How can I add module DB_MONGODB to existing installation of Kamailio 5.1.6 , if there is no package in OpenSUSE repo (home:kamailio:v5.1.x-rpms.repo) ? -- BR, Denys Pozniak

2 1

Topos on high load
by Igor Olhovskiy 01 Nov '18

01 Nov '18

Hi! We’ve run into really interesting issue while testing Kamailio with sipp (15 CPS, 300 calls - 1 failed call, more CPS - more failed calls) with topos involved. And at some point Kamailio starts to send 2 packets on received INVITE. 1 - with topos applied, 1 - with not. Main problem is to collect logs at this point, cause load is really high. Is it possible some internal race condition while topos involved? PCAP is attached. I’ve made a picture to illustrate a bit an issue Regards, Igor

2 2

Determine destination address family
by Isaac 31 Oct '18

31 Oct '18

Hello, How can I determine the address family (IPv6 or IPv4) of a destination? The destination in this case is a hostname. I'd like to set a flag if the destination is IPv6 but not sure how to go about it. Thanks, Isaac

2 2

Can't add permanent location
by David Villasmil 31 Oct '18

31 Oct '18

Hello all, I'm trying to add a permanent location. i’m using db_mode 1, use_domain = 1, i tried that command kamctl rpc ul.add location 361119997(a)m.domain.com sip:361119997@4.3.2.1 3600 0 sip:4.3.2.1:5060 Response is: { "jsonrpc": "2.0", "error": { "code": -32000, "message": "Execution Error" }, "id": 25950 } Anyone knows what this might be? David

2 5

USRLOC db_mode=4 and server_id
by Darren Williams 31 Oct '18

31 Oct '18

I am currently using multiple instances of Kamailio with a common database and using the usrloc module with db_mode=4 and server_id to filter the contacts that get loaded at startup on each server. The problem I seem to have is that using the RPC call ul.add, I cannot see any parameter to send to specify the server_id. The server_id that the contact is given is 0. If I manually go into the db and modify the server_id everything works as expected. I think I must be missing something somewhere as I'm sure you shouldn't need to do this. Can anyone help please. Thanks Daz

3 2

help with regex extracting from $rb
by Sergiu Pojoga 31 Oct '18

31 Oct '18

Hi there, May be some regex gurus can help me out. Being aware that regex's are tricky but not seeing another alternative in this particular case. Trying to extract MOSLQ field from $rb. $var(moslq) = $(rb{re.subst,/.*MOSLQ=([0-9].[0-9])\s+MOSCQ=([0-9].[0-9]).*/\1/s}); Above regex works fine IF body contains a single matching line. However, if there's 2 lines as in the below example - it return $var(moslq)=0.0, the last found value. I need only *LocalMetrics *values, so I tried this regex which works fine in regex101.com with flag 'multi-line' and *without flag 'global'*, but doesn't work in Kamailio. $var(moslq) = $(rb{re.subst,/.*MOSLQ=([0-9].[0-9])\s+MOSCQ=([0-9].[0-9])[\nRemoteMetrics]?.*/\1/s}); Assuming $rb is as follows: VQSessionReport CallID:1ca9258d285a539e3c1048205bf38d41@mypb.net LocalMetrics: Timestamps:START=2018-10-29T15:04:38Z STOP=2018-10-29T15:06:13Z QualityEst:EXTRI=127 MOSLQ=4.2 MOSCQ=4.4 RemoteMetrics: Timestamps:START=2018-10-29T15:04:38Z STOP=2018-10-29T15:06:13Z QualityEst:RCQ=0 EXTRI=0 MOSLQ=0.0 MOSCQ=0.0 Thanks in advance.

3 4

generate and forward a NOTIFY message
by AL S 31 Oct '18

31 Oct '18

Hi, I was wondering if Kamailio can generate and forward a NOTIFY message upon receiving an INVITE. Thanks, AL

3 2

Kamailio 5.1.x support under ubuntu 18.04 (beaver)
by Andrew Chen 30 Oct '18

30 Oct '18

Hi, We are planning to upgrade our Kamailio infrastructure to Kam 5.1.6 using Ubuntu 18.04. Is this a supported setup given that under the Debia package list support, I don't see beaver in there at all? Stable releases Debian/Ubuntu packages with latest release of 5.1 (choose the distribution you're interested in): deb http://deb.kamailio.org/kamailio51 wheezy main deb-src http://deb.kamailio.org/kamailio51 wheezy main deb http://deb.kamailio.org/kamailio51 jessie main deb-src http://deb.kamailio.org/kamailio51 jessie main deb http://deb.kamailio.org/kamailio51 stretch main deb-src http://deb.kamailio.org/kamailio51 stretch main deb http://deb.kamailio.org/kamailio51 buster main deb-src http://deb.kamailio.org/kamailio51 buster main deb http://deb.kamailio.org/kamailio51 precise main deb-src http://deb.kamailio.org/kamailio51 precise main deb http://deb.kamailio.org/kamailio51 trusty main deb-src http://deb.kamailio.org/kamailio51 trusty main deb http://deb.kamailio.org/kamailio51 xenial main deb-src http://deb.kamailio.org/kamailio51 xenial main Thanks. -- Andy Chen -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

1 0

How is ruid calculated
by Kjeld Flarup 28 Oct '18

28 Oct '18

I got two tablets registering with the same username, this used to work but now I got a bug report that only one of them gets a call. I found out that the problem is in the ruid column as they both end up with this ruid value uloc-1-5bd0abe9-83c-e4 How is that ruid value calculated, and how can I change this? -- -------------------- Med Liberalistiske Hilsner ---------------------- Civilingeniør, Kjeld Flarup - Mit sind er mere åbent end min tegnebog Sofienlundvej 6B, 7560 Hjerm, Tlf: 40 29 41 49 Den ikke akademiske hjemmeside for liberalismen - www.liberalismen.dk

2 1

kamailio as proxy for sipclients behind NAT without rtpproxy
by Karthik Kondapaneni 28 Oct '18

28 Oct '18

I want to use kamailio as a forwarding proxy infront of SIP registrar like asterisk/freeswitch without any rtpproxy to reduce the load on server and to be able to handle more requests . I am using default kamailio config file registration is working fine but call is not connecting . So sip clients should register on asterisk(or freeswitch) and able to receive inbound calls too . I am interested in only REGISTER & INVITE messages to restrict the messages based on sipclient's source ip . Please can someone help me with a working configuration for this setup . This is the topology .. (Sipclients with or without NAT ) ---------> (Kamailio without rtpproxy)-------------->(Asterisk or freeswitch or anyother sipserver )

1 0

add_authinfo_hdr not Added in 200 OK
by Seshu Kumar 26 Oct '18

26 Oct '18

Hello Guys, I am using Kamailio version 5.0.4 in IMS mode. I have added ims_auth in kamailio.cfg in S-Server. And added line modparam("ims_auth", "add_authinfo_hdr", 1) I am not finding “Authentication-Info” header being added in 200 OK responses. Anything more i need to enable. Kindly someone give a clue. Or this is known problem? Regards Seshu Kumar

9 21

Postgres: server version < 9.5 does not support insert_update
by Minh Phan 25 Oct '18

25 Oct '18

Hello List, I have just installed the version 5.1.6 and I get this warning message when Kamailio starts: > db_postgres_new_connection(): server version < 9.5 does not support insert_update Does it mean Kamailio will not be working properly with my current Postgres Server (9.4)? What are the consequence of not having support for insert_update command? Best regards, Minh Phan

4 3

Kamailio Slack channel
by Alex Balashov 25 Oct '18

25 Oct '18

Hi, I'd like to submit for the community's consideration the idea of having a Kamailio Slack channel. Emmanuel Schmidbauer took the initiative to create one: https://kamailio.slack.com/ The sign-in link is: https://join.slack.com/t/kamailio/shared_invite/enQtNDY1NDc5MzMwNDIzLWJlNTF… I for one think this is a good idea and, even if it doesn't ultimately get traction, it should be seriously considered by all. Yes, I am aware of the open-source-purist objection to Slack; it is proprietary and perceived to be a "walled garden" of sorts. Furthermore, for those of us who have been on the Internet and involved in technology for a significant amount of time, the irony is not lost that it is little more than a packaging of the "IRC" experience in the bloated form of a modern JavaScript application. I am also very reluctant to contribute in any way to the Balkanisation or fracturing of project-related communication channels. That thought gives me no comfort. These are all concerns of which I'm mindful. Nevertheless: - A great deal of professional real-time messaging and communication in many organisations has moved to Slack. This is also true of our company, and most companies we work with. Thus, a Slack channel for Kamailio would be highly complementary to a platform many other people are already using. - Slack provides a polished and cohesive user experience, which is why it has become so popular. There are clients for every platform, and a seamless user experience that is also highly compatible with mobile and tablet. One can shoehorn IRC into these media, but it clearly is not designed for them. - There are already lots of open-source discussion channels and developer forums on Slack. - Slack's inline Markdown and other conveniences make it _much_ easier to have discussions about code, configurations, etc., since it is easy to insert inline monospace and multiline blobs, attachments, etc. This is what inspired my switch to it. - A lot of people positioned within the current wave of thinking about IT and technology, and thus a big part of our candidate user base, have never used IRC. Anyway, for those interested, I propose that you join Emmanuel and I. Let's see how it works out? -- Alex -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

3 4

Why set this flag on registration?
by Isaac 25 Oct '18

25 Oct '18

Hello, In the example for a dual-stack IPv6/IPv4 Kamailio setup here: https://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6 the "FLB_IPV6" flag is being sent on IPv6 registrations. Why set this flag on IPv6 registrations? If I understand correctly, registration requests never make it beyond !save("location so it's not like the flag can be used further in the dial-plan. The code in question: route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if(af==INET6) setbflag(FLB_IPV6); if (!save("location")) sl_reply_error(); exit; } } Any help is appreciated. Thanks

2 2

Kamailio Question
by Brian Longwell 25 Oct '18

25 Oct '18

I'm trying to setup a simple proxy with NAT/RTPproxy. I have started with the basic cfg file and added nat and forced rtpproxy. The proxy is to reside in between endpoints and multiple SIP servers. Currently calls from endpoints are working great but my issue is calls from the server to the endpoint. The SIP messages are good until the 200 OK sent from the phone back, Kamailio is not fixing the contact so it's sending the private IP of the phone back to the server so all subsequent traffic is attempting to route to the private IP. I have tried using the fix_nated_contact everywhere I could think but still no difference. Attached is sip capture and the kamailio.cfg i'm currently using. Thank you, Brian

1 0

RtpEngine and iLBC support
by Lars Olsson 25 Oct '18

25 Oct '18

Hi, Can anyone give a quick answer regarding RtpEngine and support for iLBC codec? I have followed the instructions how to build and enable codecs according to the GitHub manual. But iLBC codec is missing when performing "rtpengine --codecs". I have tried to google around for iLBC references, but the only thing that I have found so far is libilbc, which is a lib for ffmpeg, and it looks like ffmpeg needs to be recompiled. What is the correct/fastest way forward for getting iLBC support on RtpEngine on debian 9? The purpose it to test a-law to iLBC transcoding. Best Regards, Lars

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users