- sr-users - kamailio.org

Presence Module
by Loïc Boissy 16 Dec '15

16 Dec '15

Hello, I use kamailio 4.3.2 with the presence module. When the contact is able to manage its presence, No problem for me. But when a contact doesn't manage it presence, i would like to know if it is possible to generate a sip message (like as a simple presence message) with kamailio? The goal of that is to prevent my watcher when a "simple" contact (without presence option) is registered and unregistered on my kamailio server. Thank you for your help. Best regards. Loïc BOISSY

2 4

State-full failover Kamailio+RTPProxy
by Frank Costeira 16 Dec '15

16 Dec '15

Hi, Is there anyway to do state-full failover of Kamailio+RTPProxy from a primary server to a backup server? Regards, Frank

5 7

New logo for Kamailio project
by Daniel-Constantin Mierla 16 Dec '15

16 Dec '15

Hello, based on the feedback after the proposal, there were no voices against the new logo. Therefore, as of today, Kamailio project is officially using the new logo -- see it at: - http://www.kamailio.org/w/2015/12/new-logo-for-kamailio-project/ If you display one of the old Kamailio logos, we would encourage to use the new one at your earliest convenience. That will help to propagate it faster. Posting about the change on blogs, forums or social media channels would be appreciated as well. Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com http://miconda.eu

1 0

RFC: Renaming dialog_ng to ims_dialog
by Daniel-Constantin Mierla 16 Dec '15

16 Dec '15

Hello, I am under the impression that the name dialog_ng creates confusion out there and some people are using it instead of the classic dialog module. Although it was started with goals of reworking dialog module with a different concept (which was discussed mainly by some guys that afterwards changed their job to non-voip area), dialog_ng ended up to be tailored for IMS needs. Probably we should do that refactoring of the dialog module, but meanwhile dialog_ng doesn't refect that and some people are confused by the current naming of the two modules. Practically is more about convenience at this moment and if IMS developers and users think it is not going to be a big overhead for their deployments to be upgraded, I can take care to rename it. So, while general opinion matters, I think we should see first what IMS devs prefer. I am personally not affected that much, so I am fine to keep it like it is now -- in that case, proper notes should be added to documentation, stating that dialog_ng must be used only for IMS (or when the config writer knows very well what she/he is doing). Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com http://miconda.eu

4 3

IMC module
by Alexandru Covalschi 16 Dec '15

16 Dec '15

Hello again First of all I wanted to ask if someone ever implemented that http://kamailio.org/docs/modules/4.3.x/modules/imc.html with WebRTC Second question is - I don't understand the logic. In description is said: Handles Message method.It detects if the body of the message is a conference command.If so it executes it, otherwise it sends the message to all the members in the room. But why in example (well however it has broken syntax) to IMC manager are sent only messages from chat-rooms? How message from client can possibly reach imc-manager then? Also - when I send message with body "1111111" from user 1001 and imc_manager catches it - I receive 500 command error. Why? :/ All that is working on top of sipjs-demo. -- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/

2 3

rtpengine and serial forking with multiple network interfaces
by Alex Balashov 15 Dec '15

15 Dec '15

Hi, It is not very clear to me how to handle serial forking scenarios with rtpengine where there are multiple RTP listeners attached to multiple network interfaces. That is to say, given: rtpengine ... -i net1/xxx.xxx.xxx.xxx -i net2/yyy.yyy.yyy.yyy 1. I attempt to reach SIP gateway 1 via net1, calling rtpengine_manage() in the process: rtpengine_manage("replace-origin replace-session-connection ICE=remove direction=$avp(rtp_src) direction=$avp(rtp_dest)"); 2. The call to gateway 1 fails, and I roll over to gateway 2, reached via net2, with dispatcher. I have some logic that checks how $rd has changed and sets $avp(rtp_dest) accordingly in the dispatcher failure_route[]. 3. In that failure_route[], I call: rtpengine_manage("replace-origin replace-session-connection ICE=remove direction=$avp(rtp_src) direction=$avp(rtp_dest)"); 4. When looking at the SDP for the INVITE on branch #2 going out to gateway 2, it does not appear to utilise media endpoint yyy.yyy.yyy.yyy, but rather continues to represent itself outwardly as xxx.xxx.xxx.xxx, even to gateway #2. I can't figure out what I'm doing wrong here, and the 'rtpengine' documentation only has one mention of serial forking, in the context of the discussion of the 'via-branch' parameter. As far as I can tell, this is not relevant to my use-case; I am not concerned about deleting the whole call from rtpengine, but rather about updating the SDP offer consonantly with serial forking to gateway #2. Any help would be deeply appreciated! Thanks, -- Alex -- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

2 2

Relaying failure codes back to initial server
by Alexandru Covalschi 15 Dec '15

15 Dec '15

Hello everyone! I need to relay 486/408/... other failure codes back to initial INVITE server. Here http://lists.sip-router.org/pipermail/sr-users/2010-November/066382.html is recommended just to exit failure_route, but that didn't work for me. I need that to let Freeswitch know which cause has ended the call. Now Kamailio just sends ACK to endpoint on receiving 486 BUSY. Would you kindly tell me how to achieve that? Thanks in advance -- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/

3 4

Dispatcher according to called subscriber
by Michael Nielsen 15 Dec '15

15 Dec '15

Hello everyone, I know kamailio can be configured into almsot everything for SIP - and that the dispatcher function is already build for dispatching between multiple sbc's etc... Is it possible to use the dispatcher for routing between multiple sbc's accroding to called subscriber? So I can make it somewhat multi-tentant. So subscriber A always is routed to 1 or more specific sbc's and subscriber B to 1 or more other spcific sbc's?

2 2

MySQL Database installation issue
by Kranti Kumar 15 Dec '15

15 Dec '15

Hi All, I am Newbie to Kamailio and while we configuring IMS Kamailio , facing issues on MySQL installation. OS : Debian 7 (Wheezy) While we issue apt-get install mysql-server-5.6, getting below error: apt-get install mysql-server-5.6 The following packages have unmet dependencies: mysql-community-server : Depends: libaio1 (>= 0.3.93) but it is not installable Depends: libnuma1 (>= 2.0.8~rc4) but it is not installable Recommends: mysql-client (= 5.6.28-1debian7) E: Unable to correct problems, you have held broken packages. Note:in mysql list added below lines: deb http://repo.mysql.com/apt/debian wheezy mysql-5.6 deb-src http://repo.mysql.com/apt/debian wheezy mysql-5.6 deb http://repo.mysql.com/apt/debian wheezy mysql-apt-config Can any one help us to resolve this problem. Thank you so much in advance. Regards, -kranti

2 1

Re: [SR-Users] MySQL Database installation issue
by Kranti Kumar 15 Dec '15

15 Dec '15

Ganesh, After issuing command $sudo apt-get update, adding the repo we are getting the below error. root@debian:/etc/apt/sources.list.d# apt-get install mysql-server-5.6 Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'mysql-community-server' instead of 'mysql-server-5.6' Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mysql-community-server : Depends: libaio1 (>= 0.3.93) but it is not installable Depends: libnuma1 (>= 2.0.8~rc4) but it is not installable Recommends: mysql-client (= 5.6.28-1debian7) E: Unable to correct problems, you have held broken packages. Regards, -kranti On Tue, Dec 15, 2015 at 8:20 AM, Infinicalls Infinicalls < infinicalls(a)gmail.com> wrote: > Hi, > Did you try issuing the command $sudo apt-get update after adding the > repo? What error message you are getting? > > Ganesh Kumar > > > On 12/15/15, Kranti Kumar <krantikumara(a)gmail.com> wrote: > > Hi All, > > > > I am Newbie to Kamailio and while we configuring IMS Kamailio , facing > > issues on MySQL installation. > > > > OS : Debian 7 (Wheezy) > > > > While we issue apt-get install mysql-server-5.6, getting below error: > > > > apt-get install mysql-server-5.6 > > > > > > The following packages have unmet dependencies: > > > > mysql-community-server : Depends: libaio1 (>= 0.3.93) but it is not > > installable > > > > Depends: libnuma1 (>= 2.0.8~rc4) but it is not > > installable > > > > Recommends: mysql-client (= 5.6.28-1debian7) > > > > E: Unable to correct problems, you have held broken packages. > > > > > > Note:in mysql list > > > > added below lines: > > > > deb http://repo.mysql.com/apt/debian wheezy mysql-5.6 > > > > deb-src http://repo.mysql.com/apt/debian wheezy mysql-5.6 > > > > deb http://repo.mysql.com/apt/debian wheezy mysql-apt-config > > > > > > Can any one help us to resolve this problem. > > > > Thank you so much in advance. > > > > Regards, > > > > -kranti > > > > > -- > > -- > http://www.infinicalls.com >

1 0

Issue with BYE and $du
by Rene Montilva 14 Dec '15

14 Dec '15

Hi list What could be the scenario, when hangup a call and kamailio show empty the $du var and can't send BYE to endpoint -- Ing. Rene Montilva *FOSS Developer and VoIP Engineer.*

3 4

how to send BYE to outbound leg in kamailio?
by Dileep Nunna 14 Dec '15

14 Dec '15

Hi, After credit limit reached(ims_charging), tried to send BYE to both legs in kamailo (modules/dialog_ng/dlg_req_within.c).Bye sent to caller, but when sending bye to callee it is failing.(it is considering record-routes from caller invite, not in 200 OK from callee).Is there any changes necessary? Can you please reply. Thanks, Dileep

2 1

403 Not Relaying when default port changed
by Javohir Maxmarajabov 14 Dec '15

14 Dec '15

Hello fellow developers... We have been testing Kamailio for a week and it is working great... But some of the our friends reported that they can't connect to our server using their mobile Internet... and it seems default SIP port is blocked by Service Provider... So we decided to change ports... I opened kamailio.cfg and added these lines: listen=tcp:_PUBLIC_IP_:32850 listen=udp:_PUBLIC_IP_:32850 listen=tls:_PUBLIC_IP_:32851 listen=tcp:127.0.0.1:32850 listen=udp:127.0.0.1:32850 listen=tls:127.0.0.1:32851 listen=tcp:10.19.0.5:32850 listen=udp:10.19.0.5:32850 listen=tls:10.19.0.5:32851 port=32850 port=32851 Now clients throwing an error "403 Not relaying"... I tried to enable debugging to see cfgtrace... no errors detected But when I comment out lines above, (with default cfg) everything works fine Where and What am I doing wrong? Thanks in advance :) Javokhir M.M. ________________________________________________ Disclaimer: The information in this e-mail is confidential. If you are not addressed recipient then please return and delete this e-mail from your system. Unauthorised use of or disclose the contents of this e-mail may be unlawful.

2 1

IMS-P-CSCF: stripped down version of kamailio.cfg
by Franz Edler 12 Dec '15

12 Dec '15

Dear IMS-experts, I am trying to reduce the complexity of the IMS implementation by disabling the functions which are not required for a pure stripped down IMS core platform. Therefore I deactivate NAT handling, RTP proxy, SBC, dispatcher etc... in a first step. Later on I will add the functions step-by step. According to the requirements. Now I discovered an inconsistency in the configuration file (kamilio.cfg) of P-CSCF. In main routing logic there is the point where P-CSCF distinguishes an originating-initial request from a terminating-initial request. This is done by the code: if (!ds_is_from_list()) { # Originating from Subscriber: route(Orig_Initial); } else { # Terminating to Subscriber: route(Term_Initial); } Unfortunately the function ds_is_from_list() is part of the dispatcher module which I want to avoid in a first step. Therefore another criterion must be used to distinguish between originating- and terminating-initial request. I therefore propose to use the pseudo-user-name "term" in the Route-URI as a distinguisher. What do you think? I am actually thinking about the correct statement (regular expression) to do that. Maybe anyone can help. BR Franz

1 0

transformations {s.rm,match}
by Jonathan Hunter 11 Dec '15

11 Dec '15

Hi Guys, I have been using {s.rm,match} to remove occurrences of numbers, however I am aware it removes all occurrences. Is it possible to make it only remove the first occurrence and not all? For example If I am looking to modify 639157407639 I want to remove only the first 63, not both. So I end up with 9157407639 and not 91574079. Is it possible with a transformation of is regex the way ? thanks Jon

2 1

Dispatcher Module & ds_load_list enhancement
by jay binks 11 Dec '15

11 Dec '15

Just an observation and enhancement suggestion. VERY occasionally Ive been getting *ERROR: <core> [parser/parse_param.c:591]: parse_params2(): parse_params(): No memory left* Now I know this is the root of the problem BUT ... it would be nice if it didnt leave my kamailio with no dispatchers at all. Im just suggesting that rather than calling destroy_list before re-populating the list. Could this be changed to create a new list, swap over the pointers to the new distributor list ( IF it has > 0 entries ) and then destroy_list . its just a thought ? -- Sincerely Jay

2 1

Asynchronous processing increases branch count
by Alex Balashov 11 Dec '15

11 Dec '15

Hi, Normally with serial forking, the first branch ID corresponds to $T_branch_idx == 0, i.e. Via: SIP/2.0/UDP 172.30.110.4;branch=z9hG4bK7f3d.57593ee3a139f0ae6c4a8a0f531e342c.0 In the event of failure, a second branch attempt has a branch index of 1 and so on: Via: SIP/2.0/UDP 172.30.110.4;branch=z9hG4bK7f3d.57593ee3a139f0ae6c4a8a0f531e342c.1 However, when I use asynchronous processing with t_suspend() / t_continue(), resuming the transaction in an rtimer process, I notice that the $T_branch_idx of the first branch is 1, then 2. Where did 0 go? Is this a normal effect of TM suspend/continue? Thanks! -- Alex -- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

2 1

problem with cfgtrace
by Joao Alves 11 Dec '15

11 Dec '15

Hi, Have just installed kamailio 4.3.4 and for some reason not getting cfgtraces from debugger. I've picked the default kamailio-advanced.cfg, and did no changes other than setting #!define WITH_DEBUG. Any suggestions on what could be causing this to happen? Thanks! Joao Alves This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at http://www.amdocs.com/email_disclaimer.asp

2 1

problem with cfgtrace
by Joao Alves 10 Dec '15

10 Dec '15

Hi, Have just installed kamailio 4.3.4 and for some reason not getting cfgtraces from debugger. I've picked the default kamailio-advanced.cfg, and did no changes other than setting #!define WITH_DEBUG. Any suggestions on what could be causing this to happen? Thanks! Joao Alves This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at http://www.amdocs.com/email_disclaimer.asp

1 0

WebRTC no longer supports RTP
by Yuriy Gorlichenko 10 Dec '15

10 Dec '15

https://developers.google.com/web/updates/2015/10/chrome-47-webrtc So at 47 chrome we already have no sound. What kind of proto we must use and how to handle this with rtpengine? Do anyone have same problems with it?

2 2

info: kamailio.org updates - letsencrypt for https and dkim for email
by Daniel-Constantin Mierla 10 Dec '15

10 Dec '15

Hello, during the past few days I made some updates related to the security aspects of kamailio.org services. Two are relevant for the community. 1) First, kamailio.org uses now a TLS certificate signed by letsencrypt.org, a free trusted CA backed up by Mozilla and other internet companies, so browsing via HTTPS should no longer issue any warning of untrusted certificate (previously we used a CACert.org certificate which was not trusted automatically by browsers). Wiki and mailing lists portals use the letsencrypt certificate as well, so is no reason not to browse all kamailio.org and lists.sip-router.org pages only via HTTPS. Perhaps in the near future we will try to enable redirect of HTTP to HTTPS at least for the main page and login pages for wiki, mailing lists and other places that require sensitive data. Now SSLLabs test ranks https://kamailio.org with grade A: * https://www.ssllabs.com/ssltest/analyze.html?d=kamailio.org&latest As a side note, for those that haven't noticed it, for quite some time kamailio.org is available also over IPv6. 2) Second, emails forwarded by kamailio.org and lists.sip-router.org are having now a DKIM signature. Also, there are SPF records in DNS for these domains. Hopefully, those two will help getting the emails to be allowed by various spam filters out there, as their legit origin can be checked. If you check the sources of an email messages and the email server of receiving party is doing DKIM/SPF checks, you should see some headers like next (taken from an email I received to my gmail account from sr-users mailing list): """ Authentication-Results: mx.google.com; spf=pass (google.com: domain of sr-users-bounces(a)lists.sip-router.org designates 193.22.119.66 as permitted sender) smtp.mailfrom=sr-users-bounces(a)lists.sip-router.org; dkim=pass header.i=(a)lists.sip-router.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.sip-router.org; s=20151206; h=Sender:Content-Type:List-Subscribe:List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Reply-To:Subject:MIME-Version:Message-ID:To:From:Date; bh=lGjvCZYcxBHUHaJDnut1j2YTyPsXTnXHzUb0CgcDc1Q=; b=DlD+MKoEqyISB5Ba775t3zg70FC6ouC+tEo7j5zv4dn2Dhm4pWqkQXSfU4Kp1NqW1ZRYFC/mpg/7LEcGW2FlDL9J0FpUg1VjNmN7D1wvtW08hBBw91tsXImu9yf7KZjg/p4IbXu6vznldubrSxweIaV3q/xbrLgaqP5Dsrvs/9A=; """ Kamailio is not enforcing any of those policies on received email messages, so sending to the lists should not be affected. Should anyone discover problems when browsing the web portals or notices issues with emails from our mailing lists, report them to sr-dev mailing list. Also, if anyone has more hints on increasing the security/privacy for the web server and email systems we run for kamailio.org, do not hesitate to provide us suggestions. Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com http://miconda.eu

3 2

RTPPROXY unpredictable behavior
by Javohir Maxmarajabov 10 Dec '15

10 Dec '15

I am trying to enable RTPPROXY on debian, but it seems RTPProxy is ignoring my arguments... So, I am launching RTPPROXY using command: rtpproxy -l _MY_PUBLIC_IP_ -s udp:127.0.0.1 7722 -p /var/run/rtpproxy.pid -R -a -P -r /tmp/rtppath -S /tmp/rtpspool -u rtpproxy rtpproxy Also tried with: rtpproxy -l _MY_PUBLIC_IP_ -s udp:127.0.0.1 7722 -u rtpproxy rtpproxy And when I try to start Kamailio service I am getting error: 0(10562) ERROR: rtpproxy [rtpproxy.c:1681]: send_rtpp_command(): can't send command to a RTP proxy 0(10562) ERROR: rtpproxy [rtpproxy.c:1716]: send_rtpp_command(): proxy does not respond, disable it 0(10562) WARNING: rtpproxy [rtpproxy.c:1573]: rtpp_test(): can't get version of the RTP proxy 0(10562) WARNING: rtpproxy [rtpproxy.c:1610]: rtpp_test(): support for RTP proxy has been disabled temporarily p.s. I have checked RTPPROXY, and I am sure that it is launched ps aux | grep rtpproxy returned me: root 2770 0.0 0.0 19392 480 ? Ssl 04:59 0:00 /usr/bin/rtpproxy -l _MY_PUBLIC_IP_ -s udp:127.0.0.1 7722 -p /var/run/rtpproxy.pid -R -a -P -r /tmp/rtppath -S /tmp/rtpspool -u rtpproxy rtpproxy root 2775 0.0 0.0 11740 932 pts/1 S+ 04:59 0:00 grep --color=auto rtp Which says everything is ok and rtpproxy is running with arguments that I declared But the problem is, When I check it with: netstat -tulpn | grep rtpproxy I am receiving: udp 0 0 127.0.0.1:22222 0.0.0.0:* 2853/rtpproxy As you can see rtpproxy is listening on port 22222 and completely ignoring arguments I declared :( Where and What am I doing wrong? Sorry for my English and Thanks in advance... -- Javokhir M.M. ________________________________________________ Disclaimer: The information in this e-mail is confidential. If you are not addressed recipient then please return and delete this e-mail from your system. Unauthorised use of or disclose the contents of this e-mail may be unlawful.

2 1

having a count of lost response for dialog keep alives
by Jayesh Nambiar 10 Dec '15

10 Dec '15

Hi, I'm using dlg_set_property(ka-src) and dlg_set_property(ka-dst) to keep alive my clients. In case of a network change the client does a Re-Invite with the new contact address and kamailio does keep-alives to the new address properly as the fix reported here: https://github.com/kamailio/kamailio/issues/273 The problem happens when the Re-Invite transaction on the client side is not complete and kamailio happens to send an OPTIONS keep-alive at that same time, the client fails to send back a 200 OK, because the client itself is trying to gain access on the new network. So as a work-around I thought would it be possible to end the dialog on missing at least 3 responses and not killing the dialog if one response is missed. Can it be a configurable parameter in the dialog module or something on those lines. Just a suggestion !! Thanks. - Jayesh

2 2

random incorrect method parsing
by Vasiliy Ganchev 10 Dec '15

10 Dec '15

Hi folk! Have a strange issue, and cannot understand what is wrong. Test scheme UA(sip) -> INVITE -> Kamailio The transport protocol used is TCP. The issue is reproduced randomly, in case of wrong INVITE, Kamailio does not parse Method from R-URI and answer "400 CSeq method does not match request method". The log with debug level 3 for such INVITE: https://gist.github.com/vance-od/c4e1c783adba02d80c58 my first confuse is why in line 2 different number of bytes: "read= 1025 bytes, parsed=1037" the second is in line 12: Method value is empty after this everithing brokes and kamailio answers 400. Just another call: the same setup (same device, kamailio instance etc), same conditions, just another call. Everything is OK, similar part for good call: https://gist.github.com/vance-od/01b5dff2d81f0878cff4 All my attempts to find the diff between to messages goes to nothing, the 2 INVITEs looks similar, the wireshark analyse of TCP level - also had no result (all is similar) The issue happens only with one of our devices and only in case of TCP/TLS (UDP constantly ok, this is why I am assured the problem is in device, but I need proofs) version: kamailio 4.2.5 (i386/linux) flags: STATS: Off, EXTRA_DEBUG, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, DBG_F_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. will appreciate any help or idea ,with such a mess! Cheers! -- View this message in context: http://sip-router.1086192.n5.nabble.com/random-incorrect-method-parsing-tp1… Sent from the Users mailing list archive at Nabble.com.

2 5

[Kamailio] Perfomance tests
by Prashant Desai 10 Dec '15

10 Dec '15

Hi, We are using Kamailio 4.2.3 and we have following query related to Performance tests. We see that kamailio wiki page has performance test results plotted for the Open SERV1.2.0. Would like to know is similar test are done for the later versions of kamailio till 4.2.3 ? If Yes please provide the link. Regards, Prashanth

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users