- sr-users - kamailio.org

Use of asterisk * in Kamailio routing
by Joel White 18 Jun '14

18 Jun '14

I am having an issue using an asterisk * in the kamailio routing. How would I implement this? Thank you in advance

3 6

JSON RPC Usage in Kamailio
by Jaytirth S Khairatkar 18 Jun '14

18 Jun '14

Hello, Can anyone give me a link or document which explains how to use the JSON and JSON-RPC module in Kamailio SER? I'll greatly appreciate it. Thanks and regards Jaytirth *Disclaimer* ------------------------------------------------------------ Notice: This e-mail and / or attachments (communication) may contain information that is confidential and proprietary to The Tata Power Company Limited, Strategic Engineering Division (Tata Power SED). If you are not the intended recipient of this … [View More]

1 0

s-cscf - limit of entries for 1 contact
by Ciprus, Daniel 17 Jun '14

17 Jun '14

All, is any of you aware about limitation how many reg entries can be stored in s-cscf for 1 contact ? From what I'm observing here : s-cscf can have up to 12 reg entries for 1 contact and then other entries are silently discarded. Use case: - crash of app happens 12 times - app retries to register - s-cscf sends back 200 OK with 13 contacts - another app registers and tries to send SIP MESSAGE to 1st app Result: message never gets delivered and tcpdump shows 12 messages sent out to p-… [View More]

2 2

Install SEMS
by Agiftel 17 Jun '14

17 Jun '14

Hi All, i am trying to figure out how to get SEMS and install it. If i go to iptel website, documentations and last versions give always back NOT FOUND. Is this project still maintaned?/avaible? Regards -- View this message in context: http://sip-router.1086192.n5.nabble.com/Install-SEMS-tp128500.html Sent from the Users mailing list archive at Nabble.com.

2 1

Re: [SR-Users] LCR from URI (CLI)
by Keith 17 Jun '14

17 Jun '14

Hi all, I have an issue where I have two carriers, one only accepts +44 then the CLI and the other only accepts the number with the leading zero dropped. I am using LCR to route to carriers, however I can only switch carriers by manually altering the CLI. Is there a way I can manipulate the CLI based on the destination the call is being sent to? Thanks Keith

2 1

Problems to start kamailio
by Carlos Rangel 17 Jun '14

17 Jun '14

Hello I am having problems to start kamailio 4.1.3 on a fresh centos 6.5 install with Asterisk 11.9 following the tutorial. Everything has gone well except that I cannot start kamailio. Basically I have two problems. The message that I got from the console when I try to start is [root@gt-ev-i08 kamailio-4.1.3]# kamctl start INFO: Starting Kamailio : ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed An when I look at the error messages … [View More]

2 2

Unable to make calls within the extensions
by Chandramouli P 17 Jun '14

17 Jun '14

Hi, I am new to Kamailio. I started RTPProxy using "rtpproxy -A 54.85.12.15 -F -l 10.0.0.122 -s udp:localhost:7722" command and see that my sip phones are registered with Kamailio. I am able to see using "kamctl ul show" command. But, I am unable to establish call between my registered extension through Asterisk using Kamailio. I see that calls are hitting my Asterisk server when I call from extension. I am not getting any audio and the other extension is also not at all ringing. I could not … [View More]

3 5

Problem with CANCEL handling
by Mordechay Kaganer 17 Jun '14

17 Jun '14

B.H. Hello, all! I'm trying to set up kamailio as a simple load balancer proxy between PSTN gateway and a cluster of asterisk servers - rather common use case IMHO. I'm completely new to kamailio. I have started with the default kamailio.cfg that comes with Ubuntu package and added the dispatcher module as described in the docs ( http://www.kamailio.org/docs/modules/4.0.x/modules/dispatcher.html). At the end, i got this up and running, but with one exception: if incoming call is not … [View More]

1 2

Re: [SR-Users] sip aliases
by Anna Schuster 17 Jun '14

17 Jun '14

Hi Quick question: If I create different sip aliases under my account, is any way I can see under Missed Called section on serweb.iptel.org or any elsewhere on which alias the call came on? Thank you, Anna On Sat, Jun 7, 2014 at 3:11 PM, <registrar(a)iptel.org> wrote: > > Thank you for registering with iptel.org. > > We are reserving the following SIP address for you: sip:mielul@iptel.org > > To finalize your registration please check the following URL within 24 … [View More]

2 1

Re: [SR-Users] exec_avp problem
by Ansuman Manna - Asergis Telecom 17 Jun '14

17 Jun '14

Hi, I am using the exec_avp command as followed: exec_avp("/usr/bin/mwi/test.sh $fU"); $fU taking command line arguments. Here is the shell script content: #!/bin/bash -e echo $1 logger done! $1 logger done mkdir /usr/bin/mwi/$1 || { logger 'touch failed' $? $errorMessage ; exit 1; } logger is working fine but.mkdir and other system commands are not executing. I cant figureout my misses Regards, Ansuman Manna Software Developer Asergis Telecom … [View More]

2 1

How to use unixodbc/freetds for kamailio backend
by Tim Chubb 17 Jun '14

17 Jun '14

Hi Im just getting started with kamailio with a view of evaluating it for production use. Is it possible to do the following: 1) I would like to use ODBC/FreeTDS to connect to an existing ms sql server cluster and use it for all DB related activity relating to kamailio, is this possible as we would be running kamailio in a HA configuration in production and I really don't want to have to support another DB cluster? 2) Looking at the kamdbctl scripts it seems that currently every … [View More]

2 1

Kamailio and Freepbx Integration
by Carlos Rangel 16 Jun '14

16 Jun '14

Hello List I am trying to intgrate Kamailio latest release 4.1.4 and Freepbx 5.2.11 Asterisk 11.0.9 in the same box on an internal network following Daniel´s tutorial (http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb ) . I am very new with Kamailio and I tried like 15 times, seriously. The difference is that I am not using the sipusers table nor sipregs (I may later use sipregs) nor the voicemail tables (Freepbx can manage voicemail). I believe I was able to … [View More]

1 0

stampeeding server.
by Måns Nilsson 16 Jun '14

16 Jun '14

Hi, I've got a 3.3.2 Kamailio that from time to time gets very upset and starts rushing these log entries to syslog: Jun 16 10:12:18 landsort /usr/local/kamailio/sbin/kamailio[37542]: INFO: <core> [mem/f_malloc.c:532]: freeing a free fragment (0x80a4fb370/0x80a4fb380) - ignore Jun 16 10:12:18 landsort /usr/local/kamailio/sbin/kamailio[37542]: INFO: <core> [mem/f_malloc.c:532]: freeing a free fragment (0x80a4fb370/0x80a4fb380) - ignore Jun 16 10:12:18 landsort /usr/local/kamailio/… [View More]

2 3

Kamailio help
by Nouri El Sebai (Student) 16 Jun '14

16 Jun '14

Dear Sir/Madam, I am trying to connect (in Lebanon) as a subscribed user on Kamailio that has been installed on a remote server in the US. I am being faced with the error: Forbidden (403) Reason: Not relaying Kindly advise what I should do. Best regards, Nouri El Sebai

2 1

rtpproxy_manage and ip addresses
by tonchek＠mac.com 13 Jun '14

13 Jun '14

HI to ALL! As I understand the logic of rpproxy_manage work, it uses packet source IP and port number from m= field of SDP as socket for rtpproxy process. So, we can see it in SIP and rtpproxy debug messages: IP 77.94.133.231.5060 > 77.94.133.232.5060: UDP, length 1170 [...headers stripped...] v=0 o=root 1523540081 1523540081 IN IP4 188.40.66.75 s=Asterisk PBX 1.6.1.20 c=IN IP4 188.40.66.75 t=0 0 m=audio 15260 RTP/AVP 8 0 101 [...sdp stripped...] Jun 13 21:38:09 puma rtpproxy[4728]: … [View More]

1 1

inbound kamailio dispatcher faulty routing of ack after 200 OK
by Gijs Kwakkel 13 Jun '14

13 Jun '14

client1 <> provider <> kamailio <> asterisk <> client2 when client1 calls client2, everything seems to work. sounds works. after a few seconds the call gets terminated. after tcpdump syslog and config checks i figured out that asterisk sends 200 OK through kamailio to the provider, after this the provider sends a ACK to kamailio, kamailio however sends this ACK to itself and not to asterisk. I added the config, syslog and wireshark output (converted)

2 6

Re: [SR-Users] Is t_on_failure with uac_req_send possible?
by Ian Lin 13 Jun '14

13 Jun '14

Hi Klaus, I've got the same problem on kamailio-4.1.0 and I couldn't see the sip messages reach to onreply route while using uac_req_send. Could you please give me a hint about this? Thanks! Cheers, Ian -- ------------------------ Ian Lin 林于巽 ------------------------

2 2

MSILO add on deliver event route still no joy
by Roberto Fichera 13 Jun '14

13 Jun '14

Hi All, I'm trying to add an event route to be execute for each successfully delivered message from msilo module, but I'm still not getting running the event route I have defined for it in the script. If someone can have a look at the patch and give me some hint would be really great. Thanks in advance. Roberto Fichera.

2 15

Transport protocol related question - how to bind a dialog to a negotiated transport protocol
by Klaus Feichtinger 12 Jun '14

12 Jun '14

Hello, I wonder if it is allowed using transport protocol UDP for SIP NOTIFY requests (which are generated by Kamailio/presence module), when the SUBSCRIBE dialog was established using TCP as transport protocol. In other words: this is a principal question if it is allowed changing the transport protocol for in-dialog transactions e.g. from TCP to UDP. Initially I rather thought that in-dialog transactions shall use the same transport protocol as the dialog itself (e.g. SIP INFO requests … [View More]within a standard media session), except the message would be too big for UDP, where a change to TCP is recommended. Can anybody give me a hint, if the current behaviour of Kamailio is correct or not? Or - how can I bind Kamailio to a specific transport protocol (for messages that are created by modules themselves)? Kamailio is sending NOTIFY requests with UDP, even when the subscription was done with TCP (see excerpt below). 09:58:10.360749 IP (tos 0x0, ttl 64, id 35302, offset 0, flags [DF], proto TCP (6), length 444) 10.1.1.14.37883 > 10.1.1.44.5060: P, cksum 0x1cb3 (correct), 1:393(392) ack 1 win 457 <nop,nop,timestamp 624699305 795715664> SUBSCRIBE sip:116006@10.1.1.44;transport=TCP SIP/2.0 Via: SIP/2.0/TCP 10.1.1.14:5070;rport;branch=z9hG4bK1540213071 From: <sip:1@10.1.1.14:5070>;tag=620071678 To: <sip:116006@10.1.1.44;transport=TCP> Call-ID: 449986375 CSeq: 20 SUBSCRIBE Contact: <sip:1@10.1.1.14:37883> Max-Forwards: 70 Expires: 1200 Event: presence Content-Length: 0 09:58:10.361324 IP (tos 0x10, ttl 64, id 65438, offset 0, flags [DF], proto TCP (6), length 431) 10.1.1.44.5060 > 10.1.1.14.37883: P, cksum 0x29fb (correct), 1:380(379) ack 393 win 215 <nop,nop,timestamp 795715792 624699305> SIP/2.0 202 OK Via: SIP/2.0/TCP 10.1.1.14:5070;rport=37883;branch=z9hG4bK1540213071 From: <sip:1@10.1.1.14:5070>;tag=620071678 To: <sip:116006@10.1.1.44;transport=TCP>;tag=4f7a7e54f75c89f5b968c90011d693b5-9eed Call-ID: 449986375 CSeq: 20 SUBSCRIBE Expires: 1200 Contact: <sip:10.1.1.44:5060;transport=tcp> Content-Length: 0 09:58:10.361507 IP (tos 0x10, ttl 64, id 32295, offset 0, flags [none], proto UDP (17), length 484) 10.1.1.44.5060 > 10.1.1.14.37883: SIP, length: 456 NOTIFY sip:1@10.1.1.14:37883 SIP/2.0 Via: SIP/2.0/UDP 10.1.1.44;branch=z9hG4bKc408.509e6347000000000000000000000000.0 To: sip:1@10.1.1.14;tag=620071678 From: sip:116006@10.1.1.44;tag=4f7a7e54f75c89f5b968c90011d693b5-9eed CSeq: 2 NOTIFY Call-ID: 449986375 Content-Length: 0 User-Agent: kamailio (4.0.4 (i386/linux)) Max-Forwards: 70 Event: presence Contact: <sip:10.1.1.44:5060;transport=tcp> Subscription-State: active;expires=1200 Thx Klaus [View Less]

2 2

Re: [SR-Users] Crash Kamailio 4.1.3
by Igor Potjevlesch 12 Jun '14

12 Jun '14

Hello, Do you any ideas about the reason of this issue? Is it caused by the last call? Do you have enough information with the PAI? Regards, Igor. 2014-05-28 13:47 GMT+02:00 Igor Potjevlesch <igor.potjevlesch(a)gmail.com>: > Hello, > > p *msg->pai : > > $4 = {type = HDR_PAI_T, name = { > s = 0x7fad2cf8af74 "P-Asserted-Identity: > \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: > application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=… [View More]root 1751857229 > 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 > a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 > PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 > telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", > len = 19}, body = { > s = 0x7fad2cf8af89 "\"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: > application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 > 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 > a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 > PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 > telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", > len = 43}, len = 66, > parsed = 0x7fad389a7220, next = 0x7fad2cf8baf0} > > > p *((p_id_body_t*)msg->pai->parsed) : > > $5 = {id = 0x0, num_ids = 0, next = 0x0} > > Regards, > > > > Igor. > > > 2014-05-28 13:29 GMT+02:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: > > Hello, >> >> I need now: >> >> p *msg->pai >> p *((p_id_body_t*)msg->pai->parsed) >> >> Cheers, >> Daniel >> >> >> On 28/05/14 12:46, Igor Potjevlesch wrote: >> >> Hello Daniel, >> >> Here is the result of p *msg : >> >> $3 = {id = 128120, pid = 2414, tval = {tv_sec = 1401265832, tv_usec = >> 5951}, fwd_send_flags = {f = 0 '\000', blst_imask = 0 '\000'}, >> rpl_send_flags = {f = 0 '\000', >> blst_imask = 0 '\000'}, first_line = {type = 1, len = 48, u = >> {request = {method = { >> s = 0x7fad2cf8ac30 "INVITE sip:0123456789@domainSIP/2.0\r\nVia: SIP/2.0/UDP >> a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: 69\r\nFrom: >> \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 6}, uri = { >> s = 0x7fad2cf8ac37 "sip:0123456789@domain SIP/2.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 31}, version = { >> s = 0x7fad2cf8ac57 "SIP/2.0\r\nVia: SIP/2.0/UDP >> a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: 69\r\nFrom: >> \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 7}, >> method_value = 1}, reply = {version = { >> s = 0x7fad2cf8ac30 "INVITE sip:0123456789@domainSIP/2.0\r\nVia: SIP/2.0/UDP >> a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: 69\r\nFrom: >> \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 6}, status = { >> s = 0x7fad2cf8ac37 "sip:0123456789@domain SIP/2.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 31}, reason = { >> s = 0x7fad2cf8ac57 "SIP/2.0\r\nVia: SIP/2.0/UDP >> a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: 69\r\nFrom: >> \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 7}, >> statuscode = 1}}}, via1 = 0x7fad2cf8b158, via2 = 0x0, headers = >> 0x7fad2cf8b118, last_header = 0x7fad2cf8bb30, parsed_flag = >> 18446744073709551615, >> h_via1 = 0x7fad2cf8b118, h_via2 = 0x0, callid = 0x7fad2cf8b7a0, to = >> 0x7fad2cf8b548, cseq = 0x7fad2cf8b7e0, from = 0x7fad2cf8b300, contact = >> 0x7fad2cf8b760, >> maxforwards = 0x7fad2cf8b2c0, route = 0x0, record_route = 0x0, >> content_type = 0x7fad2cf8baf0, content_length = 0x7fad2cf8bb30, >> authorization = 0x0, expires = 0x0, >> proxy_auth = 0x7fad2cf8b8d0, supported = 0x7fad2cf8ba70, require = 0x0, >> proxy_require = 0x0, unsupported = 0x0, allow = 0x7fad2cf8ba30, event = >> 0x0, accept = 0x0, >> accept_language = 0x0, organization = 0x0, priority = 0x0, subject = >> 0x0, user_agent = 0x7fad2cf8b850, server = 0x0, content_disposition = 0x0, >> diversion = 0x0, >> rpid = 0x7fad2cf8b890, refer_to = 0x0, session_expires = 0x0, min_se = >> 0x0, sipifmatch = 0x0, subscription_state = 0x0, date = 0x7fad384baa90, >> identity = 0x0, >> identity_info = 0x0, pai = 0x7fad2cf8bab0, ppi = 0x0, path = 0x0, >> privacy = 0x0, body = 0x0, >> eoh = 0x7fad2cf8afea "\r\nv=0\r\no=root 1751857229 1751857230 IN IP4 >> a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 a.b.c.d\r\nt=0 >> 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 PCMA/8000\r\na=rtpmap:3 >> GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> unparsed = 0x7fad2cf8afea "\r\nv=0\r\no=root 1751857229 1751857230 IN >> IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 a.b.c.d\r\nt=0 >> 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 PCMA/8000\r\na=rtpmap:3 >> GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> rcv = {src_ip = {af = 2, len = 4, u = {addrl = {1950469485, >> 140381949486832}, addr32 = {1950469485, 0, 943417072, 32685}, addr16 = >> {52589, >> 29761, 0, 0, 26352, 14395, 32685, 0}, addr = >> "m\315At\000\000\000\000\360f;8\255\177\000"}}, dst_ip = {af = 2, len = 4, >> u = {addrl = {67638457, 0}, >> addr32 = {67638457, 0, 0, 0}, addr16 = {5305, 1032, 0, 0, 0, 0, >> 0, 0}, addr = "\271\024\b\004", '\000' <repeats 11 times>}}, src_port = >> 5060, dst_port = 5060, >> proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = >> 2, sa_data = "\023\304m\315At\000\000\000\000\000\000\000"}, sin = >> {sin_family = 2, >> sin_port = 50195, sin_addr = {s_addr = 1950469485}, sin_zero = >> "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = 50195, >> sin6_flowinfo = 1950469485, sin6_addr = {__in6_u = {__u6_addr8 = >> '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, >> __u6_addr32 = {0, 0, 0, >> 0}}}, sin6_scope_id = 0}}, bind_address = 0x7fad383b6588, >> proto = 1 '\001'}, >> buf = 0x7fad2cf8ac30 "INVITE sip:0123456789@domain SIP/2.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nProxy-Authorization: >> Digest username=\"0123456789\", realm=\"domain\", algorithm=MD5, uri=\ >> "sip:0123456789@domain\", nonce=\"U4Wf01OFnqcywgUETmE15dMbFu/Y1hpt\", >> response=\"d055e0f3ba4646773d6ab6c5a05feec7\"\r\nDate: Wed, 28 May 2014 >> 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, >> NOTIFY, INFO\r\nSupported: replaces, timer\r\nP-Asserted-Identity: >> \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 1254, new_uri = { >> s = 0x7fad2ceabdef "sip:0123456789@gw SIP/2.0\r\nRecord-Route: >> <sip:a.b.c.d;lr=on>\r\nVia: SIP/2.0/UDP >> a.b.c.d;branch=z9hG4bK6e86.62fc1f802e2e40a8a17cb1556d5ccfa8.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport=5060\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 INVITE\ >> sendrecv\r\n", len = 1254, new_uri = { >> s = 0x7fad2ceabdef "sip:0123456789@gw SIP/2.0\r\nRecord-Route: >> <sip:a.b.c.d;lr=on>\r\nVia: SIP/2.0/UDP >> a.b.c.d;branch=z9hG4bK6e86.62fc1f802e2e40a8a17cb1556d5ccfa8.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport=5060\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 INVITE\---Type >> <return> to continue, or q <return> to quit--- >> r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nDate: Wed, 28 >> May 2014 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, >> SUBSCRIBE, NOTIFY, INFO\r\nSupported: replaces, >> timer\r\nP-Asserted-Identity: \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 19}, dst_uri = {s = 0x0, len = 0}, parsed_uri_ok = 0, parsed_uri = >> {user = { >> s = 0x7fad2ceabdf3 "0123456789@gw SIP/2.0\r\nRecord-Route: >> <sip:a.b.c.d;lr=on>\r\nVia: SIP/2.0/UDP >> a.b.c.d;branch=z9hG4bK6e86.62fc1f802e2e40a8a17cb1556d5ccfa8.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport=5060\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nDate: Wed, 28 >> May 2014 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, >> SUBSCRIBE, NOTIFY, INFO\r\nSupported: replaces, >> timer\r\nP-Asserted-Identity: \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 10}, passwd = {s = 0x0, len = 0}, host = { >> s = 0x7fad2ceabdfe "gw SIP/2.0\r\nRecord-Route: <sip:a.b.c.d;lr=on>\r\nVia: >> SIP/2.0/UDP >> a.b.c.d;branch=z9hG4bK6e86.62fc1f802e2e40a8a17cb1556d5ccfa8.0\r\nVia: >> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport=5060\r\nMax-Forwards: >> 69\r\nFrom: \"FAX\" <sip:0123456789@domain>;tag=as729b3498\r\nTo: >> <sip:0123456789@domain>\r\nContact: <sip:0123456789@a.b.c.d>\r\nCall-ID: >> 419b254b1c0531af3bf256b14f1881e2@domain\r\nCSeq: 103 >> INVITE\r\nUser-Agent: Asterisk PBX 1.6.2.9-2+squeeze3\r\nRemote-Party-ID: >> \"FAX\" <sip:0123456789@domain>;privacy=off;screen=no\r\nDate: Wed, 28 >> May 2014 08:30:32 GMT\r\nAllow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, >> SUBSCRIBE, NOTIFY, INFO\r\nSupported: replaces, >> timer\r\nP-Asserted-Identity: \"0123456789\"<sip:0123456789@a.b.c.d>\r\nContent-Type: >> application/sdp\r\nContent-Length: 298\r\n\r\nv=0\r\no=root 1751857229 >> 1751857230 IN IP4 a.b.c.d\r\ns=Asterisk PBX 1.6.2.9-2+squeeze3\r\nc=IN IP4 >> a.b.c.d\r\nt=0 0\r\nm=audio 11886 RTP/AVP 8 3 0 101\r\na=rtpmap:8 >> PCMA/8000\r\na=rtpmap:3 GSM/8000\r\na=rtpmap:0 PCMU/8000\r\na=rtpmap:101 >> telephone-event/8000\r\na=fmtp:101 0-16\r\na=ptime:20\r\na=sendrecv\r\n", >> len = 4}, port = {s = 0x0, len = 0}, params = {s = 0x0, len = 0}, >> sip_params = {s = 0x0, len = 0}, headers = { >> s = 0x0, len = 0}, port_no = 0, proto = 0, type = SIP_URI_T, flags >> = 0, transport = {s = 0x0, len = 0}, ttl = {s = 0x0, len = 0}, user_param = >> {s = 0x0, >> len = 0}, maddr = {s = 0x0, len = 0}, method = {s = 0x0, len = 0}, >> lr = {s = 0x0, len = 0}, r2 = {s = 0x0, len = 0}, gr = {s = 0x0, len = 0}, >> transport_val = { >> s = 0x0, len = 0}, ttl_val = {s = 0x0, len = 0}, user_param_val = >> {s = 0x0, len = 0}, maddr_val = {s = 0x0, len = 0}, method_val = {s = 0x0, >> len = 0}, lr_val = { >> s = 0x0, len = 0}, r2_val = {s = 0x0, len = 0}, gr_val = {s = 0x0, >> len = 0}}, parsed_orig_ruri_ok = 0, parsed_orig_ruri = {user = {s = 0x0, >> len = 0}, passwd = { >> s = 0x0, len = 0}, host = {s = 0x0, len = 0}, port = {s = 0x0, len >> = 0}, params = {s = 0x0, len = 0}, sip_params = {s = 0x0, len = 0}, headers >> = {s = 0x0, >> len = 0}, port_no = 0, proto = 0, type = ERROR_URI_T, flags = 0, >> transport = {s = 0x0, len = 0}, ttl = {s = 0x0, len = 0}, user_param = {s = >> 0x0, len = 0}, >> maddr = {s = 0x0, len = 0}, method = {s = 0x0, len = 0}, lr = {s = >> 0x0, len = 0}, r2 = {s = 0x0, len = 0}, gr = {s = 0x0, len = 0}, >> transport_val = {s = 0x0, >> len = 0}, ttl_val = {s = 0x0, len = 0}, user_param_val = {s = 0x0, >> len = 0}, maddr_val = {s = 0x0, len = 0}, method_val = {s = 0x0, len = 0}, >> lr_val = {s = 0x0, >> len = 0}, r2_val = {s = 0x0, len = 0}, gr_val = {s = 0x0, len = >> 0}}, add_rm = 0x7fad2ce523c8, body_lumps = 0x0, reply_lump = 0x0, >> add_to_branch_s = '\000' <repeats 57 times>, add_to_branch_len = 0, >> hash_index = 26854, msg_flags = 145, flags = 2, set_global_address = {s = >> 0x0, len = 0}, >> set_global_port = {s = 0x0, len = 0}, force_send_socket = 0x0, path_vec >> = {s = 0x0, len = 0}, instance = {s = 0x0, len = 0}, reg_id = 0, ruid = {s >> = 0x0, len = 0}, >> location_ua = {s = 0x0, len = 0}, ldv = {flow = {decoded = 0, rcv = >> {src_ip = {af = 0, len = 0, u = {addrl = {0, 0}, addr32 = {0, 0, 0, 0}, >> addr16 = {0, 0, 0, 0, 0, >> 0, 0, 0}, addr = '\000' <repeats 15 times>}}, dst_ip = {af >> = 0, len = 0, u = {addrl = {0, 0}, addr32 = {0, 0, 0, 0}, addr16 = {0, 0, >> 0, 0, 0, 0, 0, 0}, >> addr = '\000' <repeats 15 times>}}, src_port = 0, dst_port = >> 0, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 0, >> sa_data = '\000' <repeats 13 times>}, sin = {sin_family = 0, >> sin_port = 0, sin_addr = {s_addr = 0}, sin_zero = >> "\000\000\000\000\000\000\000"}, sin6 = { >> sin6_family = 0, sin6_port = 0, sin6_flowinfo = 0, sin6_addr >> = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, >> 0, 0, 0, 0, 0, 0}, >> __u6_addr32 = {0, 0, 0, 0}}}, sin6_scope_id = 0}}, >> bind_address = 0x0, proto = 0 '\000'}}}} >> >> Regards, >> >> >> >> Igor. >> >> >> >> 2014-05-28 12:01 GMT+02:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: >> >>> Hello, >>> >>> can you give the output in gdb for: >>> >>> set print elements 2000 >>> p *msg >>> >>> Cheers, >>> Daniel >>> >>> >>> On 28/05/14 11:48, Igor Potjevlesch wrote: >>> >>> hello, >>> >>> Kamailio 4.1.3 crashed today, with an segmentation fault error : >>> kernel: kamailio[2406]: segfault at 18 ip 0000000000495792 sp >>> 00007fff3d9d2d80 error 4 in kamailio[400000+275000] >>> >>> Here is the result of BT : >>> #0 0x0000000000495792 in pv_get_strval (msg=0x7fad2cf8a530, >>> param=0x7fad3858c288, res=0x7fff3d9d2eb0, sval=0x18) at pvapi.c:521 >>> #1 0x00007fad365b0da8 in pv_get_pai (msg=0x7fad2cf8a530, >>> param=0x7fad3858c288, res=0x7fff3d9d2eb0) at pv_core.c:1021 >>> #2 0x0000000000499518 in pv_get_spec_value (msg=0x7fad2cf8a530, >>> sp=0x7fad3858c270, value=0x7fff3d9d2eb0) at pvapi.c:1266 >>> #3 0x00007fad34c6d7d9 in extra2strar (extra=0x7fad3858c260, >>> rq=0x7fad2cf8a530, val_arr=0x7fad34e7ae30, >>> int_arr=0x7fad34e7b37c,type_arr=0x7fad34e7b4e7 "\002\002\002\002") at >>> acc_extra.c:261 >>> #4 0x00007fad34c65393 in acc_db_request (rq=0x7fad2cf8a530) at acc.c:474 >>> #5 0x00007fad34c6fb43 in acc_onreply (t=0x7fad2ce0b138, >>> req=0x7fad2cf8a530, reply=0x7fad3859faa8, code=200) at acc_logic.c:471 >>> #6 0x00007fad34c7008d in tmcb_func (t=0x7fad2ce0b138, type=512, >>> ps=0x7fff3d9d3120) at acc_logic.c:559 >>> #7 0x00007fad36e6a478 in run_trans_callbacks_internal >>> (cb_lst=0x7fad2ce0b1a8, type=512, trans=0x7fad2ce0b138, >>> params=0x7fff3d9d3120) at t_hooks.c:290 >>> #8 0x00007fad36e6a68a in run_trans_callbacks_with_buf (type=512, >>> rbuf=0x7fad2ce0b1f8, req=0x7fad2cf8a530, repl=0x7fad3859faa8, flags=183) at >>> t_hooks.c:336 >>> #9 0x00007fad36e9cc06 in relay_reply (t=0x7fad2ce0b138, >>> p_msg=0x7fad3859faa8, branch=0, msg_status=183, cancel_data=0x7fff3d9d3480, >>> do_put_on_wait=1) at t_reply.c:2001 >>> #10 0x00007fad36e9f0b7 in reply_received (p_msg=0x7fad3859faa8) at >>> t_reply.c:2499 >>> #11 0x000000000045d837 in do_forward_reply (msg=0x7fad3859faa8, mode=0) >>> at forward.c:777 >>> #12 0x000000000045e0f8 in forward_reply (msg=0x7fad3859faa8) at >>> forward.c:860 >>> #13 0x00000000004a5887 in receive_msg ( >>> buf=0x924600 "SIP/2.0 183 Session Progress\r\nVia: SIP/2.0/UDP >>> a.b.c.d;branch=z9hG4bK6e86.62fc1f802e2e40a8a17cb1556d5ccfa8.0;received=a.b.c.d\r\nVia: >>> SIP/2.0/UDP a.b.c.d:5060;branch=z9hG4bK6b726b55;rport=5"..., len=872, >>> rcv_info=0x7fff3d9d3800) at receive.c:273 >>> #14 0x000000000053c838 in udp_rcv_loop () at udp_server.c:536 >>> #14 0x000000000053c838 in udp_rcv_loop () at udp_server.c:536 >>> #15 0x000000000046d42b in main_loop () at main.c:1617 >>> #16 0x00000000004704d3 in main (argc=7, argv=0x7fff3d9d3b38) at >>> main.c:2533 >>> >>> >> -- >> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >> >> > [View Less]

2 19

Kamailio v4.1.4 Released
by Daniel-Constantin Mierla 12 Jun '14

12 Jun '14

Hello, Kamailio SIP Server v4.1.4 stable release is out. This is a maintenance release of the latest stable branch, 4.1, that includes fixes since release of v4.1.3. There is no change to database schema or configuration language structure that you have to do on installations of v4.1.x. Deployments running previous v4.x.x versions are strongly recommended to be upgraded to v4.1.4. For more details about version 4.1.4 (including links and guidelines to download the tarball or from GIT … [View More]

2 1

Problem with MSRP AUTH
by Muhammad Shahzad 12 Jun '14

12 Jun '14

Hi, I am trying to authentication MSRP connection using the example code of msrp event route in module documentation here, http://kamailio.org/docs/modules/4.1.x/modules/msrp.html#idp119248 -- ... } else if ($msrp(method)=="AUTH") { ... if (!pv_www_authenticate("WEBRTC_SIP_REALM", "$var(passwd)", "0", "$msrp(method)")) { if (auth_get_www_authenticate("WEBRTC_SIP_REALM", "0", "$var(wauth)")) { xlog("L_INFO", "Generated www authenticate … [View More]

2 17

Download SER SIP server
by Horo, Priyam 12 Jun '14

12 Jun '14

Hi, I cannot find the link to download the SER SIP server. I went to http://www.iptel.org/download, but do not see how to download 0.9.6 version. Could you please point me to the link. Thanks, Priyam.

3 2

check for the number of open branches in Reply
by Sebastian Damm 12 Jun '14

12 Jun '14

Hi, I have a scenario where I want to send a custom SIP package whenever a call is successfully established or definitely missed. This works pretty well, except when a user has multiple devices online. I need to send exactly one packet. When initiating the call I set a flag, in the reply route I check for that flag, and on the first 4xx or 2xx response the packet gets sent out. After that I reset the flag, so no other packet is generated for another response coming in. Now when a user has … [View More]

3 5

planning the release of v4.1.4
by Daniel-Constantin Mierla 12 Jun '14

12 Jun '14

Hello, I am considering to release v4.1.4 next week, in one of the days within the interval June 10-12, depending on work that has to be done. If anyone is aware of issue not reported on tracker or patches that have not been backported, add to the tracker or write a message to sr-dev mailing list. Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

2 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users