- sr-users - kamailio.org

Kamailio devel event starting tomorrow
by Daniel-Constantin Mierla 15 Nov '22

15 Nov '22

Hello, as some of you may know from previous announcements, a few of us meet tomorrow and the day after in Dusseldorf at sipgate.de for a Kamailio development event. Should anyone want to join remotely, we can make available a video conference bridge. Join if you want to work together to add new features to Kamailio or help improving existing tools and documentation. It is not an event for discussing about Kamailio or how to use it. Reply to this email (can be only to me this time) if you … [View More]

1 0

USRLOC module - Not all records are written to the db with db_mode 2
by Markus Bönke 15 Nov '22

15 Nov '22

Hello NG, we are using Kamailio 5.4.2 with the USRLOC module configured with db_mode 2 (Write-Back scheme). The database is Postgres 11. Sometimes some records are not written to the database, however I can lookup them by "kamcmd ul.lookup ..." . There are no database errors (like constraint violations or value too large errors) to see in the postgres.log. Not even when I execute "kamcmd ul.flush" manually. There are also no related error messages to see in the Kamailio.log during "kamcmd ul.… [View More]

4 4

set_dlg_profile profile name with and without value?
by Benoit Panizzon 15 Nov '22

15 Nov '22

Hi I am wondering, if a profile with value can on the same time be used as profile without value of this usages exclude each other. Like doing: set_dlg_profile("caller"); set_dlg_profile("caller","$si"); get_profile_size("caller","$var(c_total)"); get_profile_size("caller","$si","$var(c_ip)"); xlog("L_INFO", "$cfg(route): Total Caller: $var(c_total)\n"); xlog("L_INFO", "$cfg(route): Caller from $si: $var(c_ip)\n"); I fear this is not possible, as I keep getting: w_set_dlg_profile_helper()… [View More]

2 1

Tcp/websocket closing
by David Villasmil 14 Nov '22

14 Nov '22

Hello all, Question: Say there’s a client connecting via websocket, makes a call and then unregisters. But kamailio sends a 401 expecting the client to authenticate. If the client doesn’t, and simply stays there, at what point is the socket closed? Is it the OS timeout? Thanks! David -- Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 2

About the Presence service 401 issue
by SparkleZou 14 Nov '22

14 Nov '22

Hi Sir/Madam, I'm trying to set up the presence service according to the manual http://kb.asipto.com/kamailio:presence:k31-made-simple Also refer to the doc https://kamailio.org/docs/modules/devel/modules/xcap_server.html Seems the Kamailio cfg fine. but when to get the xcap data, get the 401 response. Please see the attached log. Is there any more should be configured? Thanks! BR, Sparkle Zou

3 8

Uneven-distribution of calls
by satyaprakash ch 14 Nov '22

14 Nov '22

Hi, what would be the reason for the *Un-even* distribution of calls from kamailio proxy to freeswitches. The dispatcher lists are having the same weight. For example: If we are having 4 freeswitches, the calls are evenly distributing for 3 freeswitches but there is high calls for the 4th freeswitch. The dispatcher weight for the freeswitches are: rweight=50;weight=50;cc=1; Thanks and regards, Satya

2 7

kamcmd dlg.list => ERROR: reply too big
by Benoît Panizzon 14 Nov '22

14 Nov '22

Hi List I fear I am loosing dialogues somehow. We have implemented counting concurrent connections from customers by using set_dlg_profile. Sometimes, the concurrent channel count does not decrease, despite the dialog end being detected. Now I suppose I have maybe a dozen concurrent calls running, but kamcmd dlg.list is unable to dump the list. kamcmd dlg.dump_file generates quite a large file. I was running into SHM issues while load-testing and had to increase SHM to 1024 to accommodate … [View More]

2 1

External script
by Володимир Іванець 11 Nov '22

11 Nov '22

Hello! I was wondering how everyone uses exec_cmd(). I'm using it to call an external script directly from a worker route which locks it for the time of execution. If all that is needed is to call it and forget, should the best option be to call the async route with exec_cmd()? Thanks a lot for any input on this topic!

3 3

Kill child process created by app_python module
by Marat Gareev 11 Nov '22

11 Nov '22

Hello! I'm trying to use app_python module to perform periodic actions. This is a simple python code def _update(): while True: _action() time.sleep(60) class noop_handler: def child_init(self, rank): return 0 def ksr_request_route(self, msg): return 1 def mod_init(): # signal.signal(signal.SIGTERM, signal.default_int_handler) proc = multiprocessing.Process(target=_update) # proc.daemon = True proc.start() ksr.notice('Forked process {} to update\n'.format(proc.pid)) return noop_handler() … [View More]

3 5

acc module => account register messages?
by Benoît Panizzon 11 Nov '22

11 Nov '22

Hi Is there a way to get register messages into accounting? This could come in handy while helping figure out if clients were not registered while calls attemted to reach them. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz … [View More]

3 2

Mysql.sock
by satyaprakash ch 08 Nov '22

08 Nov '22

Hi Team, I want to know this reason - why kamailio only can connect to mysql using */tmp/mysql.sock <https://phonecom.atlassian.net/browse/VOIP-1760?atlOrigin=eyJpIjoiNzY1NjU4Y…>* and why it can’t use /run/mysql/mysql.sock Thanks and regards, Satya.

2 1

Mysql.sock
by Satyaprakash Chiramchetty 08 Nov '22

08 Nov '22

Hi Team, I want to know this reason - why kamailio only can connect to mysql using */tmp/mysql.sock <https://phonecom.atlassian.net/browse/VOIP-1760?atlOrigin=eyJpIjoiNzY1NjU4Y…>* and why it can’t use /run/mysql/mysql.sock Thanks and regards, Satya. -- * <https://www.ecosmob.com/> * *Disclaimer* In addition to generic Disclaimer which you have agreed on our website, any views or opinions presented in this email are solely those of the originator and do not necessarily … [View More]

1 0

evapi:message-received and state
by Alex Balashov 07 Nov '22

07 Nov '22

Hi, I am t_continue()ing a transaction inside of event_route[evapi:message-received]. The $evapi(msg) has quite a bit of payload that will be needed by the resumed transaction. Is there a good way to inject this data into the transaction scope externally? No [X]AVPs created in the event_route persist, of course, since the route is scoped outside of the transaction. I have been using htable to pass data into the transaction, keyed by the index and label. But, this strikes me as a kind of … [View More]

2 5

Kamailio Not Responding to Connections
by Carlos Escalona 07 Nov '22

07 Nov '22

Hello! I hope all of you are having a nice day. I would like some help. I recently had some troublesome events in my Kamailio setup, at a particular time of the day specifically after lunch when my platform's traffic spikes Kamailio suddenly stops responding to any connection and restarting it didn't fix the problem basically I have to restart the hardware to get out of that failed state. The only unusual log is the following: Oct 28 16:49:10 ip-172-32-16-97 /usr/sbin/kamailio[952]: ERROR: … [View More]

2 1

Serial Forking on BYE message
by Ilie Soltanici 05 Nov '22

05 Nov '22

Hello, I have a challenge here to do serial forking, not when the call is failed on the first destination, but when the call is ended. So, the first will go to one destination, will be answered, and when it's ended the BYE message should be dropped and forward the initial INVITE to another location. Is that possible?

2 1

Re: [SR-Users] $Rp variable seems to contain wrong port
by Luis Azedo 04 Nov '22

04 Nov '22

have you tried to use $T_rpl($Rp) ?

1 0

$Rp variable seems to contain wrong port
by Ross McKillop 03 Nov '22

03 Nov '22

Hi All, At the risk of possibly dragging up an old thread (https://lists.kamailio.org/pipermail/sr-users/2021-June/112791.html <https://lists.kamailio.org/pipermail/sr-users/2021-June/112791.html>) I’m seeing unusual behaviour where $Rp is still showing what I think is the ‘wrong’ behaviour, but given Daniel’s reply on the earlier thread I want to be sure this isn’t the intended behaviour. The thread above confirms that $Rp is not taken from the IP layer but is intended to give the … [View More]

1 0

Siptrace and Kamailio "stress" test
by Igor Olhovskiy 03 Nov '22

03 Nov '22

Hello, Found an interesting scenario, maybe something could be done here. I have a siptrace module configured like modparam("siptrace", "duplicate_uri", "sip:<MY_HOMER_SERVER>:9060") modparam("siptrace", "hep_mode_on", 1) modparam("siptrace", "trace_to_database", 0) modparam("siptrace", "trace_on", 1) modparam("siptrace", "hep_version", 3) modparam("siptrace", "trace_mode", 1) When Kamailio is under stress test (sipflood via OPTIONS/TLS), with this settings it transfers all flood to … [View More]

3 5

Pipelimit needs restart to reload values
by Duarte Rocha 02 Nov '22

02 Nov '22

Greetings, I've been using the pipelimit module and the pl_check function to control users rates in my proxy. if (!pl_check("$var(UserID)", "TAILDROP", "$var(UserRate)")) { pl_drop(); exit; } In this case $var(UserID) is the pipe and $var(UserRate) is the maximum rate. The value of the rate is retrieved on every call via query to a DB. If I change the UserRate value to 0 CPS on the DB calls are not rejected unless they go over 1 CPS. However, if I restart Kamailio all calls are … [View More]

3 3

Appending new branches via external means
by Alex Balashov 01 Nov '22

01 Nov '22

Hi, Is there a means of appending new branches from config script for a transaction which is already proceeding in the background, without using `tsilo`? That is to say, I have an async transaction which is resumed in an async worker and is t_relay()’d away to some destination. Meanwhile, I have learned about new destinations for it to try via an incoming registration, and would like to append additional parallel forking branches to that transaction, even though it is already proceeding. … [View More]

3 6

consume_credentials not working on PRACK?
by Benoit Panizzon 01 Nov '22

01 Nov '22

Hi List I noticed, that one of our CPE copies the Proxy-Authorization HF in almost all messages sent. As PRACK were not authenticated, those headers were potentially sent on to the destination disclosing the authentication username and realm. So assuming, if credentials are present, the client wishes them to be validated, I added: if (has_credentials("$fd")) { xlog("L_INFO", "$cfg(route): got $rm with credentials. Validate them!\n"); route(AUTH); … [View More]

3 5

Authentication: Is it possible to ignore realm? How to avoice unnecessary challenge because of changed realm?
by Benoit Panizzon 01 Nov '22

01 Nov '22

Hi As mentioned in the last email, we have a CPE which adds credentials to any request so I would like to validate them. We use $rd as realm. Let's use example.com as example. During the initial INVITE, this works as expected. I try to only show the headers I think are relevant to the issue I face. INVITE sip:1234@example.com SIP/2.0 Proxy-Authorization: [...] realm="example.com" Contact: <sip:9876@192.168.1.1:5060> Authentication user in realm "example.com" == $rd is validated and … [View More]

2 2

SIP routing per MSISDN
by Anthony Blandin 30 Oct '22

30 Oct '22

Hello, I need to route SIP INVITE towards a specific node based on the MSISDN of the Request URI. I saw that the dispatcher module should be able to make this with the function ds_select_dst and the algorithm "hash over request-URI user" but I don't understand how the routing is done if we can't associate the request-URI user with the destination address in the dispatcher DB. Maybe my understanding of this module is wrong. Could you help me to achieve this? Thanks Anthony

3 2

Kamailio sending response to source IP and port from Via ?
by Chaigneau, Nicolas 27 Oct '22

27 Oct '22

Hello, I'm using Kamailio in stateless mode to send redirect responses. I've noticed that the responses are sent to the packet source IP address, and to the port found in the Via header. I'm a bit confused. I was expecting the response to be sent to the address and port found in the Via header. Is it the expected behaviour ? I'm using Kamailio 5.5.2. Thanks for your help ! Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of … [View More]

2 4

Issue with debug 3 after upgrade to kamailio 5.6.2+
by Julia Bo 27 Oct '22

27 Oct '22

Hello, After upgrading kamailio 5.6.1 to 5.6.2 (from source) debug 3 doesn't print messages related to calls to the log file. I only see OPTIONS transactions in debug. Does anyone have the same problem? Best regards, Julia.

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users