sr-users

sr-users@lists.kamailio.org

31 participants
37386 discussions

packets exceeding MTU size
by Ali Taher 18 Aug '22

18 Aug '22

Hello all, Lately I faced an issue that Kamailio is not responding to some invite packets coming from SBC. When investigating I found that these packets exceeds MTU size. Could this be the issue? Knowing that in Kamailio configuration I have a condition on is_method("INVITE"). Could be that in case of packet exceeding MTU size it's not considered as invite packet by Kamailio? I have Kamailio 5.2.5. Regards, Ali Taher

4 6

How to enforce max_contacts at registration?
by Benoit Panizzon 18 Aug '22

18 Aug '22

Hi List # ----- registrar params ----- modparam("registrar", "method_filtering", 1) # modparam("registrar", "append_branches", 0) modparam("registrar", "max_contacts", 10) modparam("registrar", "max_expires", 3600) modparam("registrar", "gruu_enabled", 0) modparam("registrar", "retry_after", 30) modparam("registrar", "xavp_cfg", "reg") == snipp == # Handle SIP registrations route[REGISTRAR] { # We are authenticated. # Create an AOR based on the auth_username for the location service. $var(saveuri) = "sip:" + $aU + "@" + $rd; # Set max_contacts limit via registration module reg xavp. if ($avp(debug) > 0) { xlog("L_INFO", "$cfg(route): Setting max_contacts to $avp(max_contacts) for $var(saveuri)\n"); } $xavp(reg=>max_contacts) = $avp(max_contacts); # Save Location! $var(result) = save("location","0x00","$var(saveuri)"); if ($var(result) == -2) { xlog("L_ERR", "$cfg(route): Too many contacts for $var(saveuri)\n"); sl_reply_error(); } if ($var(result) == -1) { xlog("L_ERR", "$cfg(route): Error saving location $var(saveuri)\n"); sl_reply_error(); } if ($var(result) == 1) { xlog("L_INFO", "$cfg(route): Contact $var(saveuri) inserted\n"); } if ($var(result) == 2) { xlog("L_INFO", "$cfg(route): Contact $var(saveuri) updated\n"); } if ($var(result) == 3) { xlog("L_INFO", "$cfg(route): Contact $var(saveuri) deleted\n"); } if ($var(result) == 4) { xlog("L_INFO", "$cfg(route): Contact $var(saveuri) returend\n"); } exit; } == snapp == $avp(max_contacts) is set to 1 Still, multiple registrations are possible for the $aU in question. What am I doing wrong? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

4 8

Re: [SR-Users] TLSv1.3 support
by Henning Westerholt 17 Aug '22

17 Aug '22

Hello, Please keep the list in CC. Regarding opening new TLS 1.3 connection, this should work, but did not tested it right now. If not, open an issue on our tracker. Regarding the option to restrict to only TSLv1.3 connection - I have added support for configuring this to git master version in commit 105600b3. Maybe you can give it a try, the patch should probably apply to 5.6.x branch. Cheers, Henning From: Helio <hok.sh10(a)gmail.com> Sent: Wednesday, August 17, 2022 2:52 PM To: Henning Westerholt <hw(a)gilawa.com> Subject: Re: [SR-Users] TLSv1.3 support Regarding the full support, I would like to know if Kamailio can start a TLSv1.3 connection as a client. Another point is if we can restrict to accept only TLS v1.3 and not TLSv1.2 for instance. Thanks, Helio Em ter., 16 de ago. de 2022 às 11:45, Henning Westerholt <hw(a)gilawa.com<mailto:hw@gilawa.com>> escreveu: Hello, not sure about the question about “full support”, maybe you can add details. Kamailio supports connection with TLSv1.3: $ openssl s_client -connect kam04.tst.domain.net:5061<http://kam04.tst.domain.net:5061> -tls1_3 2>&1 | tail -n 10 New, TLSv1.3, Cipher is TLS_AES_256_GCM_SHA384 Server public key is 4096 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated Early data was not sent Verify return code: 0 (ok) Cheers, Henning From: sr-users <sr-users-bounces(a)lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>> On Behalf Of Helio Sent: Monday, August 15, 2022 8:01 PM To: sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> Subject: [SR-Users] TLSv1.3 support Hello, I noticed that Kamailio has option TLSv1.2+. Does the Kamailio support full TLSv1.3? Or does it have any restrictions? BR,

1 1

Kamailio not responding in heavy load
by Ali Taher 17 Aug '22

17 Aug '22

Hello all, I'm using sqlops module to connect to postgres and get the routing of calls from postgresql database. In order to troubleshoot issues in case they happened, I added each call details to Kamailio log. In some cases, when there is heavy traffic load (around 100 cps), I don't find some calls in Kamailio log, knowing that I can find them on the switch log (switch sending the invite packets to Kamailio). When checking the traces on these calls taken by the switch, it's clear that Kamailio is not responding to the invite packets sent by the switch. It could be because there are no available process to handle the call at this moment (I have set fork=14) Is it possible to check if there are calls pending in the queue? Regards,

2 1

Request rpms for 5.6.1
by Richard Chan 17 Aug '22

17 Aug '22

Hi kamailio team, I'd like to request that 5.6.1 be added to rpm.kamailio.org. Thanks! S-P Chan

3 3

TLSv1.3 support
by Helio 16 Aug '22

16 Aug '22

Hello, I noticed that Kamailio has option TLSv1.2+. Does the Kamailio support full TLSv1.3? Or does it have any restrictions? BR,

2 1

proper way for infinite loop in event_route for evrexec module
by Patrick Karton 16 Aug '22

16 Aug '22

Hello i would like to use the evrexec module to execute background jobs over exec module mainly because i want to be able to trigger that route manually via rpc from time to time. in the documentation its is stated we should use tasks that run forever and except using while loop i dont see another way. and i dont to want to disable max_while_loops. but if i disable it i will get error message like runaway while (1091, 9): more then 100 loops. so is there another way to do it properly ? Thanks.

4 5

Remove and Re add FROM in 200 OK sl reply
by Lewis Hutchinson 16 Aug '22

16 Aug '22

Hello All kamailio 5.5.3 KEMI Python Lab environemnt Is there a reason why this does not work? Lines 2 and 3 work but the removal of the initial From is not working on Line 1 1. KSR.hdr.remove("From") 2. KSR.hdr.append_to_reply("From: " +KSR.pv.gete("$fn") + " <"+KSR.pv.gete("$fu") + ">" + ";tag=" +KSR.pv.gete("$ft") + "--1234" + "\r\n") 3. KSR.sl.sl_send_reply(200, "OK") In a SUBSCRIBE/NOTIFY scenario I am trying to control the From Tag returned in the 200OK so I can use the same one in subsequent NOTIFY messages generated outside of Kamailio, my theory is use the From tag in the Subscribe and append it on the reply with -1234 for example (this is only in a Lab at this stage, any other options please let me know) Whenever I do this I end up with 2 From headers (see below) SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.1.67:5060;branch=z9hG4bK-f710a11a;rport=46404;received=xx.yy.xx.yy From: " testuser" sip:limeant30@sip.viazeta.com;tag=bf8745def06c7b12 To: <sip: testuser(a)sip.viazeta.com>;tag=47969b75f14e6954812863912d1cf21c.b5f3318f Call-ID: b21ba770-9b5836aa(a)192.168.1.67 CSeq: 18137 SUBSCRIBE Contact: "testuser" <sip:testuser@ xx.yy.xx.yy:46404> Expires: 3600 From: "testuser" sip:testuser@testbed.com;tag=bf8745def06c7b12--1234 Content-Length: 0 I have tried many many variations but the original From header always persists I have checked the debug logs and it says it has been removed Anyone know what I am missing? And how to get KSR.hdr.remove("From") to work. Looking in a debug log the header is removed. Lewis

2 3

Need help with multi mtree
by Benoît Panizzon 16 Aug '22

16 Aug '22

Heya I try to use mutli tree mtree to define multiple 'named' prefixes. id(int,auto) tname(string) tprefix(string) tvalue(string) 0:tech:+1:1 0:tech:+9:1 0:cust:+1:1 0:cust:+9:0 Kamailio is not complaining while loading this file, but mtree.summary shows no entries. Any hint on what I may be do wrong? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 2

Kamailio Configuration Help
by P. White 16 Aug '22

16 Aug '22

Hi All, Really sorry to bother everyone, but if possible, can I ask for a little help? I've been attempting to get Kamailio configured and working for some considerable time now (read: Years of occasional tinkering, and weeks of recent dedicated evening work) -- all without success. I have a sip trunk from sipgate, with two PSTN numbers assigned. My local network has a static external IP, with an internal private network. Currently I have Kamailio running within the intenal network along with two physical sip telephones (gigaset and an old grandstream), although I do have the option to put kamailio within a DMZ if necessary. Would anyone have a working config file that they could share please, permitting incoming and outgoing calls? With grateful thanks, Phil

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users