sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

RPMs for v3.2.2
by Daniel-Constantin Mierla 02 Feb '12

02 Feb '12

Hello, for the records, the RPMs for v3.2.2 are available (32b and 64b: CentOS 5 and 6, RedHat 5.0 and 6.0, OpenSUSE 11.4 and 12.1, Fedora 15 and 16): * http://www.kamailio.org/wiki/packages/rpms Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Re: [SR-Users] best way to start kamailio at boot
by Jason Penton 01 Feb '12

01 Feb '12

I am not familiar with Centos but I suspect there is another script being run from somewhere. What I would do is move the /etc/init.d/kamailio script somewhere safe (your home directory for eg). Then reboot and see if kamailio still starts - if it does you need to find out whihc script is being called and where it is. If you are not running X by default you are prob in runlevel 3. If you are running X, then it will be 5. check where you runlevel scripts are pointing. e.g. ls -al /etc/rc3.d/SXXkamailio (X = [0-9]) Cheers Jason On Wed, Feb 1, 2012 at 4:26 PM, Uri Shacked <uri.shacked(a)gmail.com> wrote: > Hi, > > when i reboot the machine, it starts with 32Mb and i do not understand > why... > so, does it use a startup file that i am not familiar with? > what is the appropriate runlevel? how do i set it and where? > > thanks, > Uri > > > >Hi Sammy, > > > >When you use the init script, it is starting Kamailio with the correct > >arguments to get the environment you wish (-m 2048 probably). If however, > >you just call kamailio these args are not there. Im not sure why you are > >running with kamailio command directly. Why don't you add your init script > >to the appropriate runlevel for auto startup? > > > >Cheers > >Jason > > On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > > >* Hi again.... > *>* > *>* i installed kamailio 3.2.2 today. > *>* i used the chkconfig tool to get kamailio run at boot. > *>* i edited both /etc/init.d/kamailio and /etc/default/kamailio files to > run > *>* with 2048Mg of memory. > *>* now, when i run /etc/init.d/kamailio start, it starts with the right > *>* amount of memory. > *>* when i rum "kamailio" only, it starts with 32Mb.... > *>* > *>* i use centos 6.2 64bit. > *>* any ideas? > *>* > *>* > *>* > *>* > *>* > *>* On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>* > *>>* Hi. > *>>* I already checked it all. The kamailio start and stop command did not > *>>* work. The init script i used was for debian. Now i use another > script, > *>>* for centos. It works. I add the kamailio proccess with chkconfig > tool. > *>>* Thanks. > *>>* > *>>* On 10/25/11, Sammy Govind <govoiper at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>>* > Thanks Alex, > *>>* > > *>>* > Hey Uri, can you check if you've /etc/init.d/kamailio file exists > - open > *>>* > that file if exists and cross verify few parameters. > *>>* > Few of these are as follows > *>>* > > *>>* > PATH=/sbin:/bin:/usr/sbin:/usr/bin > *>>* > DAEMON=*/usr/local/sbin/kamailio* > *>>* > NAME=kamailio > *>>* > DESC=kamailio > *>>* > HOMEDIR=/var/run/ > *>>* > *PIDFILE*=$HOMEDIR/$NAME.pid > *>>* > DEFAULTS=*/etc/default/kamailio.default* > *>>* > RUN_KAMAILIO=yes > *>>* > > *>>* > Make sure /etc/default/kamailio.default file exits. here are the > *>>* contents of > *>>* > my file. > *>>* > > *>>* > RUN_KAMAILIO=yes > *>>* > USER=kamailio > *>>* > GROUP=kamailio > *>>* > MEMORY=64 > *>>* > DUMP_CORE=no > *>>* > > *>>* > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < > *>>* > klaus.mailinglists at pernau.at<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>>* > > *>>* >> Test the startupscript if they work: > *>>* >> > *>>* >> /etc/init.d/kamailio start > *>>* >> /etc/init.d/kamailio stop > *>>* >> > *>>* >> If this works, then make sure to have proper symlinks from the > *>>* >> corresponding runlevel to the startup script. Do it manually or > use the > *>>* >> chkconfig tool. > *>>* >> > *>>* >> klaus > *>>* >> > *>>* >> > *>>* >> On 24.10.2011 08:00, Uri Shacked wrote: > *>>* >> > *>>* >>> hi again, > *>>* >>> i found out that on my centos 5.4 the command start-stop-daemon > that > *>>* the > *>>* >>> /etc/init.d/kamailio uses is not recognized. > *>>* >>> it is kamailio3.2 any ideas? > *>>* >>> > *>>* >>> > *>>* >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at > gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > *>>* >>> <mailto:ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>> > wrote: > *>>* >>> > *>>* >>> Hi, > *>>* >>> what is the best way to start kamailio at boot? > *>>* >>> the example in the install is not working for me.... > *>>* >>> > *>>* >>> > * > This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at http://www.smilecoms.com/disclaimer

2 2

Re: [SR-Users] best way to start kamailio at boot
by Uri Shacked 01 Feb '12

01 Feb '12

On Wed, Feb 1, 2012 at 4:26 PM, Uri Shacked <uri.shacked(a)gmail.com> wrote: > Hi, > > when i reboot the machine, it starts with 32Mb and i do not understand > why... > so, does it use a startup file that i am not familiar with? > what is the appropriate runlevel? how do i set it and where? > > thanks, > Uri > > > >Hi Sammy, > > > >When you use the init script, it is starting Kamailio with the correct > >arguments to get the environment you wish (-m 2048 probably). If however, > >you just call kamailio these args are not there. Im not sure why you are > >running with kamailio command directly. Why don't you add your init script > >to the appropriate runlevel for auto startup? > > > >Cheers > >Jason > > On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > > >* Hi again.... > *>* > *>* i installed kamailio 3.2.2 today. > *>* i used the chkconfig tool to get kamailio run at boot. > *>* i edited both /etc/init.d/kamailio and /etc/default/kamailio files to > run > *>* with 2048Mg of memory. > *>* now, when i run /etc/init.d/kamailio start, it starts with the right > *>* amount of memory. > *>* when i rum "kamailio" only, it starts with 32Mb.... > *>* > *>* i use centos 6.2 64bit. > *>* any ideas? > *>* > *>* > *>* > *>* > *>* > *>* On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>* > *>>* Hi. > *>>* I already checked it all. The kamailio start and stop command did not > *>>* work. The init script i used was for debian. Now i use another > script, > *>>* for centos. It works. I add the kamailio proccess with chkconfig > tool. > *>>* Thanks. > *>>* > *>>* On 10/25/11, Sammy Govind <govoiper at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>>* > Thanks Alex, > *>>* > > *>>* > Hey Uri, can you check if you've /etc/init.d/kamailio file exists > - open > *>>* > that file if exists and cross verify few parameters. > *>>* > Few of these are as follows > *>>* > > *>>* > PATH=/sbin:/bin:/usr/sbin:/usr/bin > *>>* > DAEMON=*/usr/local/sbin/kamailio* > *>>* > NAME=kamailio > *>>* > DESC=kamailio > *>>* > HOMEDIR=/var/run/ > *>>* > *PIDFILE*=$HOMEDIR/$NAME.pid > *>>* > DEFAULTS=*/etc/default/kamailio.default* > *>>* > RUN_KAMAILIO=yes > *>>* > > *>>* > Make sure /etc/default/kamailio.default file exits. here are the > *>>* contents of > *>>* > my file. > *>>* > > *>>* > RUN_KAMAILIO=yes > *>>* > USER=kamailio > *>>* > GROUP=kamailio > *>>* > MEMORY=64 > *>>* > DUMP_CORE=no > *>>* > > *>>* > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < > *>>* > klaus.mailinglists at pernau.at<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> > wrote: > *>>* > > *>>* >> Test the startupscript if they work: > *>>* >> > *>>* >> /etc/init.d/kamailio start > *>>* >> /etc/init.d/kamailio stop > *>>* >> > *>>* >> If this works, then make sure to have proper symlinks from the > *>>* >> corresponding runlevel to the startup script. Do it manually or > use the > *>>* >> chkconfig tool. > *>>* >> > *>>* >> klaus > *>>* >> > *>>* >> > *>>* >> On 24.10.2011 08:00, Uri Shacked wrote: > *>>* >> > *>>* >>> hi again, > *>>* >>> i found out that on my centos 5.4 the command start-stop-daemon > that > *>>* the > *>>* >>> /etc/init.d/kamailio uses is not recognized. > *>>* >>> it is kamailio3.2 any ideas? > *>>* >>> > *>>* >>> > *>>* >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at > gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> > *>>* >>> <mailto:ushacked at gmail.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>> > wrote: > *>>* >>> > *>>* >>> Hi, > *>>* >>> what is the best way to start kamailio at boot? > *>>* >>> the example in the install is not working for me.... > *>>* >>> > *>>* >>> > * >

1 0

best way to start kamailio at boot
by Uri Shacked 01 Feb '12

01 Feb '12

Hi, what is the best way to start kamailio at boot? the example in the install is not working for me....

5 9

subscriber specific dialplan
by Bayram Karagoz 01 Feb '12

01 Feb '12

Hi, I'm trying to make when each subscriber dials 7 digits add subscriber based specific prefix to dialed number defined in subscriber or dialplan table. I know that it's possible with avp but I'm not professional about avp. could you send me a successful scenario and config example please?

1 1

redirect client to keep original ruri
by Andrew Pogrebennyk 01 Feb '12

01 Feb '12

Hello, assuming that I want to use contact from 302 response as outbound proxy but keep the original Request-URI, what should I do? Calling the revert_uri() after get_redirects() in failure_route doesn't do the trick.

3 7

save a Q850 cause reason from a reply
by Uri Shacked 01 Feb '12

01 Feb '12

Hi guys..... the header searching and saving the Q850 code didn't work. here is what i wrote in the cfg, in the failure route: *# manage failure routing cases failure_route[MANAGE_FAILURE] { xlog("L_CRIT", "failure \n"); if($avp(CAR)=="CALLOUT"){ xlog("L_CRIT", "failure in callout \n"); ##if(is_present_hf("Reason")) { xlog("L_CRIT", "failure in reason\n"); $avp(Q850)=$(hdr(Reason){param.value,cause}{s.int}); xlog("L_CRIT", "failure in reason $avp(Q850)\n"); ##}* here is the log print...... * 3(3433) CRITICAL: <script>: failure 3(3433) CRITICAL: <script>: failure in callout 3(3433) CRITICAL: <script>: failure in reason 3(3433) ERROR: <core> [lvalue.c:347]: non existing right pvar 3(3433) ERROR: <core> [lvalue.c:407]: assignment failed at pos: (524,15-524,54) 3(3433) CRITICAL: <script>: failure in reason <null>* the command *is_present_hf("Reason")) * is under ## because of tests... when it was in use, the script didn't even went in the "if", the command didn't recognize the header. ** here is the sip trace for the 486, the header is there... * Message Header Call-ID: 6994099017399497785-1328029200-13379 From: <sip:36264529;ss7-cpc=10;cpc=ordinary@172.16.10.3 ;user=phone>;tag=6994099017399497785 To: <sip:39955011@172.16.60.161;user=phone>;tag=9299942026613191738 CSeq: 1 INVITE Via: SIP/2.0/UDP 172.16.60.161;received=172.16.60.161;branch=z9hG4bK08d6.c653f346.2,SIP/2.0/UDP 172.16.10.3:5060;branch=z9hG4bK-6110080000017439-ac100a03-1 Supported: timer,100rel Reason: Q.850;cause=17;text="UserBusy" Reason Protocols: Q.850 Cause: 17(0x11)[User busy] Content-Length: 0*

2 1

Re: [SR-Users] Kamailio v3.2.2 Released
by Daniel-Constantin Mierla 01 Feb '12

01 Feb '12

On 2/1/12 11:58 AM, Uri Shacked wrote: > worked OK, thanks. > [...] ok, keep cc-ing the list for topics discussed there, so people reading the archive later know what was the final solution. Cheers, Daniel > > On Wed, Feb 1, 2012 at 11:40 AM, Uri Shacked <ushacked(a)gmail.com > <mailto:ushacked@gmail.com>> wrote: > > i will try again. > i did edit the modules.lst file with all the modules i use.... > will let you know ASAP. > > On Wed, Feb 1, 2012 at 11:33 AM, Daniel-Constantin Mierla > <miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote: > > Hello, > > you haven't compiled and installed db_mysql from 3.2.2, so it > is installed the one from 3.2.1. Be sure you include db_mysql > in the list of modules to be compiled and installed, one > option is: > > make FLAVOUR=kamailio include_modules="db_mysql" cfg > make all > make install > > Cheers, > Daniel > > > On 2/1/12 10:30 AM, Uri Shacked wrote: >> >> made install and got the following error: >> "kamailio >> loading modules under >> /usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/ >> 0(21428) ERROR: <core> [sr_module.c:415]: ERROR: module >> version mismatch for >> /usr/local/lib64/kamailio/modules/db_mysql.so; core: >> kamailio 3.2.2 (x86_64/linux); module: kamailio 3.2.1 >> (x86_64/linux)" >> >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> > http://linkedin.com/in/miconda -- http://twitter.com/miconda > > > -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Re: [SR-Users] Kamailio v3.2.2 Released
by Uri Shacked 01 Feb '12

01 Feb '12

> made install and got the following error: > "kamailio > loading modules under > /usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/ > 0(21428) ERROR: <core> [sr_module.c:415]: ERROR: module version mismatch > for /usr/local/lib64/kamailio/modules/db_mysql.so; core: kamailio 3.2.2 > (x86_64/linux); module: kamailio 3.2.1 (x86_64/linux)" >

3 2

Alternative Debian APT repository
by Daniel-Constantin Mierla 01 Feb '12

01 Feb '12

Hello, besides existing deb.kamailio.org, I added builds for Debian 5.0, 6.0 and Ubuntu 10.04 to the OpenSUSE Build Service (OBS). These repositories are built only for stable releases in 3.2.x series. Main target for them is to be sure the releases compile properly, across main Linux distributions, OBS providing an easy interface to keep updating and building until everything is ok. Anyhow, these alternative repositories may be handy to use for some of you. Details about setting APT sources are available at: http://www.kamailio.org/wiki/packages/debs#using_obs_repository Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users