sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

send bye to caller after dialog timeout
by Uri Shacked 12 Jan '12

12 Jan '12

hi, i am manging dialogs in memory only. no DB. i would like to set a timeout for a dialog and when the timeout is reached, to send "bye" to the parties. today i know how to timeout the dialog, and using the dlg_bye function is understood. but, how do i activate the dlg_bye when the time out is executed and whith which parameters in order to disconnect the right session? the explenation about the "route" to perform is not clear? please, thanks, Uri

2 3

"out of memory" in Kamailio 3.2
by Henry Fernandes 11 Jan '12

11 Jan '12

I upgraded from Kamailio 3.1 to Kamailio 3.2 (x86_64/linux) 31c991 recently. Since upgrading, my LCR does not work. The "load_gws" command always returns a 2 (meaning no routes found). When I do a "sercmd lcr.dump_rules", I get the following error: # sercmd lcr.dump_rules error: 500 - Internal server error: out of memory I've tried increasing "binrpc_max_body_size" and "binrpc_struct_max_body_size", but this doesn't help. -H

3 6

Hashed Passwords
by Ali Jawad 11 Jan '12

11 Jan '12

Hi All We are using plain text passwords for authentication, for the obvious reasons we want to change to hashed passwords so first I executed the following on the SQL server : update subscriber set ha1 = md5(concat(username, ':', domain, ':', password)), ha1b = md5(concat(username, '@', domain, ':', domain, ':', password)) The related config is : # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "ha1") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) and # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "ha1") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", 1) But I keep getting unauthorized, what did I miss here. Regards

3 4

Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
by Sammy Govind 10 Jan '12

10 Jan '12

Congrats so now RTPproxy issue has been resolved and Kamailio is saying that support for it has been enables. Next thing is ...ignore the reverse resolving of IPv6 IP !! thats not an issue at all for now. The error you are receiving is due to sip PUBLISH method ... that can be a bug in Kamailio or anything on which I can't comment any better than you. I hope some other gy take over the thread from here and see if this _IS_ really an issue or not, if so why is this here then !! Regards, Sammy. On Fri, Jan 6, 2012 at 3:37 PM, nunu abe <nunu_abe(a)yahoo.com> wrote: > Hi, > > I commented out the unix socket in the modparam as instructed and there is > still no change. > > 1. The rtpproxy was listening to port 7722, but to make sure I stopped it > and restarted it with the command: > xxx@DualStackCS:~$ sudo netstat -pln |grep rtpp > udp 0 0 127.0.0.1:7722 0.0.0.0:* > 860/rtpproxy > > xxx@DualStackCS:~$ sudo /etc/init.d/rtpproxy restart > Restarting RTP relay: rtpproxy. > > xxxxx@DualStackCS:~$ sudo netstat -pln |grep rtpp > udp 0 0 127.0.0.1:7722 0.0.0.0:* > 2303/rtpproxy > > xxxx@DualStackCS:~$ sudo /etc/init.d/rtpproxy stop > Stopping RTP relay: rtpproxy. > > xxxxx@DualStackCS:~$ sudo netstat -pln |grep rtpp > xxxxx@DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 > /3001:0:0:1::10 -s udp:127.0.0.1:7722 > xxxxx@DualStackCS:~$ sudo netstat -pln |grep rtpp > udp 0 0 127.0.0.1:7722 0.0.0.0:* > 2366/rtpproxy > > 2.Kamailio service started without error message but with this warning: > 0(1549) WARNING: <core> [socket_info.c:1275]: WARNING: fix_hostname: > could not rev. resolve 3001:0:0:1:0:0:0:10 > > 16(2422) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child > (11): nathelper > 16(2422) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child > (11): rtpproxy > 15(2421) INFO: rtpproxy [rtpproxy.c:1415]: rtp proxy > <udp:localhost:7722> found, support for it enabled > > 3.As soon as clients register, these errors appear in the logs > (similar errors appear even more frequently while making a call, shown in > the attachment): > 7(2407) DEBUG: <core> [parser/msg_parser.c:630]: method: <PUBLISH> > 7(2407) DEBUG: <core> [parser/msg_parser.c:632]: uri: <sip:300@ > [3001:0:0:1::10]> > 7(2407) DEBUG: <core> [parser/msg_parser.c:634]: version: <SIP/2.0> > 7(2407) DEBUG: <core> [parser/parse_via.c:1288]: Found param type 232, > <branch> = <z9hG4bK3847>; state=16 > 7(2407) DEBUG: <core> [parser/parse_via.c:2563]: end of header reached, > state=5 > 7(2407) DEBUG: <core> [parser/msg_parser.c:515]: parse_headers: Via > found, flags=2 > 7(2407) DEBUG: <core> [parser/msg_parser.c:517]: parse_headers: this is > the first via > 7(2407) DEBUG: <core> [receive.c:147]: After parse_msg... > 7(2407) DEBUG: <core> [receive.c:188]: preparing to run routing scripts... > 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=464 a=6 n=route > 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=573 a=17 n=if > 7(2407) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=568 a=26 n=mf_process_maxfwd_header > > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=744 a=26 n=is_method > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=767 a=25 n=consume_credentials > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=780 a=3 n=return > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=489 a=26 n=remove_hf > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=500 a=6 n=route > 6(2406) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=704 a=27 n=sl_send_reply > > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=467 a=6 n=route > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=789 a=17 n=if > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=789 a=57 n=force_rport > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=799 a=17 n=if > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=790 a=26 n=nat_uac_test > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=795 a=17 n=if > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=791 a=26 n=is_method > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=792 a=25 n=fix_nated_register > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=796 a=40 n=setflag > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=799 a=3 n=return > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=470 a=6 n=route > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=617 a=17 n=if > 4(2458) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] > l=582 a=25 n=has_totag > > So still lost in this issue. > Thanks for your help! > > Regards, > Maedot > ------------------------------ > *From:* Sammy Govind <govoiper(a)gmail.com> > *To:* nunu abe <nunu_abe(a)yahoo.com>; SIP Router - Kamailio (OpenSER) and > SIP Express Router (SER) - Users Mailing List < > sr-users(a)lists.sip-router.org> > *Sent:* Friday, January 6, 2012 10:06 AM > > *Subject:* Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty. > > Don't forget to change the modparams for RTPproxy as > > modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722") > # modparam("rtpproxy", "rtpproxy_sock", > "unix:/var/run/rtpproxy/rtpproxy.sock") > > > On Fri, Jan 6, 2012 at 2:05 PM, Sammy Govind <govoiper(a)gmail.com> wrote: > > Hi, > > Kamailio is trying to communicate to RTproxy using port 7722 , execute > the command > > # netstat -pln | grep rtpp > > and see if your rtpproxy is even listening on that interface, which it > isn't for sure. > > No if above is true then stop rtpproxy and start rtpproxy using the b/m > command > > #sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 -s udp:127.0.0.1:7722 > > confirm using the netstat command that RTPproxy is indeed listening on > 7722 port, if yes restart Kamailio and make sure you don't see kamailio > complaining about not connecting to RTPproxy anymore. > > > Regards, > Sammy. > > On Fri, Jan 6, 2012 at 1:31 PM, nunu abe <nunu_abe(a)yahoo.com> wrote: > > Hi, > > I have already posted this message but it was sent only to Sammy Govind > somehow, not to the mailing list. So I am posting it again to the list. I > am sorry if this is double posting or if this is not the right way to do it. > > **Original message*** > > > Hi Sammy > These are the params from my kamilio cfg file. Just a reminder, the > whole cfg file is copied from the link: > http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6, i just edited the > IP addresses and DB_URL line to fit my settings. > #!ifdef WITH_NAT > # ----- rtpproxy params ----- > # modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722") > modparam("rtpproxy", "rtpproxy_sock", > "unix:/var/run/rtpproxy/rtpproxy.sock") > > # ----- nathelper params ----- > modparam("nathelper", "natping_interval", 30) > modparam("nathelper", "ping_nated_only", 1) > modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) > modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") > > # params needed for NAT traversal in other modules > modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") > modparam("usrloc", "nat_bflag", FLB_NATB) > #!endif > I have tried to use both unix and UDP sockets each at a time.I removed the > square braces from the IP addresses in the rtpproxy default files and its > no more complainig about the "rtpproxy: setbindhost: No addressassociated with hostname" > but still have the same messages in the logs. > Thank you four your help. > Regards, > Maedot > > *From:* Sammy Govind <govoiper(a)gmail.com> > > *To:* nunu abe <nunu_abe(a)yahoo.com>; SIP Router - Kamailio (OpenSER) and > SIP Express Router (SER) - Users Mailing List < > sr-users(a)lists.sip-router.org> > *Sent:* Thursday, January 5, 2012 8:13 PM > > *Subject:* Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty. > > hi, > > quick look at your logs, > > 14(1596) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy > 15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): nathelper > 14(1596) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it > 5(1584) DEBUG: db_mysql [km_my_con.c:123]: server version is 5.1.41-3ubuntu12.10 > 14(1596) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy > 14(1596) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily > 14(1596) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (9): debugger > 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): nathelper > 14(1596) DEBUG: debugger [debugger_mod.c:124]: rank is (9) > 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): rtpproxy > 5(1584) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy > 5(1584) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it > 5(1584) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy > 5(1584) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily > 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): debugger > 5(1584) DEBUG: debugger [debugger_mod.c:124]: rank is (5) > 15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): rtpproxy > 15(1597) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy > 15(1597) ERROR: rtpproxy [rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it > 15(1597) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy > 15(1597) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily > 15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): debugger > > > > paste the rtpproxy/nathelper module params lines which are in your > kamailio.cfg. > > regards, > sammy > > > On Wed, Jan 4, 2012 at 7:59 PM, nunu abe <nunu_abe(a)yahoo.com> wrote: > > Thank you Sammy for noticing :) > > Now I have a bit of different but same problem. After the earlier posting > the message I decided to start everything from scratch and I installed > everything new. > But I still have problem. The rtpproxy server is not working, it fails to > replace the IP address of the sender in the SDP and hence there is no RTP > communication. > These are the steps I followed: > > > 1. Freshly installed kamailio 3.2.1 on Kubuntu from GIT > > 2. Installed mysql server > > 4. installed rtpproxy, changed its user to be kamailio. > > 3.Copied the provided kamailio.cfg file from the link and edited the IP > addresses and the DBURL to reflect my settings > > 4. Uncommented the Control socket line and added these lines in the > /etc/default/rtpproxy file > CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock" > ADDR_IPV4=[10.10.10.10] > ADDR_IPV6=[3001:0:0:1::10] > EXTRA_OPTS="-l {ADDR_IPV4} -6 /{ADDR_IPV6}" > > *** I aslso tried without adding the last three lines, but it made no > difference.*** > > 5. Started rtpproxy in a bridge mode > > xxxx@DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 > *** I have also tried to start it this way :xxxx@DualStackCS:~$ sudo > rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10 -s > unix:/var/run/rtpproxy/rtpproxy.sock - but no difference**** > > xxxx@DualStackCS:~$ ps aux|grep rtpproxy > root 1522 0.0 0.0 11384 696 ? Ssl 15:31 0:00 rtpproxy > -F -l 10.10.10.10 -6 3001:0:0:1::10 > xxxx 1528 0.0 0.0 3324 804 pts/1 S+ 15:31 0:00 grep > --color=auto rtpproxy > > xxxxx@DualStackCS:~$ sudo /etc/init.d/kamailio start > > > 6. Started kamailio > @DualStackCS:~$ sudo /etc/init.d/kamailio restart > > I have attached the log file. > > Many thanks for your help. > > Regards, > > Maedot > > *From:* Sammy Govind <govoiper(a)gmail.com> > *To:* miconda(a)gmail.com; SIP Router - Kamailio (OpenSER) and SIP Express > Router (SER) - Users Mailing List <sr-users(a)lists.sip-router.org> > *Sent:* Tuesday, January 3, 2012 2:04 PM > *Subject:* Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty. > > Hi, > > I had a good laugh when I read the reply, but going through the whole > thread again I found this: > " It displays the same message even when I replace ADDR_IPV4 and > ADDR_IPV6 with IP addresses. " > > So there _IS_ some problem here. > > Nuno, can you please copy paste the exact command which you executing, > plus paste the logs, > > -- > Regards, > Sammy. > > On Tue, Jan 3, 2012 at 2:22 PM, Daniel-Constantin Mierla < > miconda(a)gmail.com> wrote: > > Hello, > > the ADDR_IPV4 and ADDR_IPV6 have to be replaced with real IP addresses > that you have on the system runnin RTPProxy. > > Cheers, > Daniel > > > On 1/3/12 8:56 AM, nunu abe wrote: > > Dear Daniel, > Greetings and Happy New year to you all! I would like to thank you very > much for your detailed and well structured tutorials on Kamailio. I am > resending this email as I sent the earlier one before I was a member of the > mailing list and I thought it may have been sent to the spam folder. If not > then, I apologize for double posting. > I was trying to design a similar scenario like the one " Run your own > SIP VoIP service on both IPv4 and IPv6 " as explained on Asipto web-page( > http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6). However I ran > into difficulties with rtpproxy. The proxy is not routing media packets > as it should. I followed the instruction regarding the kamailio.cfg file > and edited the necessary lines according to my settings. I think my problem > comes from setting up the rtpproxy. > 1. I edited the /etc/default/rtpproxy file. i.e. I uncommented the line > - CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock" > 2. I started the rtpproxy with this command: rtpproxy -F -l ADDR_IPV4 -6 > /ADDR_IPV6 . However, after this command the system returns the message : rtpproxy: > setbindhost: No address associated with hostname > It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6 > with IP addresses. > > 3. I have also tried using the udp socket:- CONTROL_SOCK=udp: > 127.0.0.1:22222, of course I have replaced the unix socket by this udp > socket in the kamilio.cfg file. > So my question is, what did I do wrong with the settings that SIP > messages are traversing normal from IPv4 client to IPv6 client and vice > versa but media files(RTP packets) are not? The rtpproxy receives the media > files from one client but fails to forward them to the other client. > Thanks for your help. > Maedot > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda -- http://twitter.com/miconda > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > > >

2 8

most links broken on http://www.iptel.org/ser/doc/gettingstarted host siprouter.teigre.com is unknown)
by Klausfpga 10 Jan '12

10 Jan '12

Hi, II just want to find the minimalistic setup to get a sip registrar up and running. I went to http://www.iptel.org/ser/doc/gettingstarted and tried to download the html documentation: ( http://siprouter.teigre.com/doc/gettingstarted/ ) My browser reports that this host is unknown all the other links are also pointing to the same unknown host. Has the server been renamed. Having the 'Getting Started' Software not available renders ser useless for all new users. I used ser already many years ago, with a very simple config file and if I remember well, there were some very primitive example config files for simple use cases, but somehow I don't know how to locate them. I'd like to have a minimalistic setup for a sip registrar with softphones connected on two subnets (no NAT or firewall involved) and am rather stuck without some documentation. Thanks in advance for any pointers

3 2

app_lua coredump
by noc＠nelcom-voip.com 10 Jan '12

10 Jan '12

I've installed kamailio (3.2, 3.2-nightly, dev-nightly) for debian unstable (wheezy) using repository at http://deb.kamailio.org and constantly get a coredump with this lua code: -- SIP request routing function route_request(name) sr.dbg("routing SIP request from Lua [" .. name .. "]\n") -- initial checks of SIP request if sr.maxfwd.process_maxfwd(10) < 0 then sr.sl.send_reply(483,"Too Many Hops") return end end I've started with an example at this page http://kb.asipto.com/kamailio:usage:k32-lua-routing, and then just reduced the lua script to code above. If I do comment sr.maxfwd.process_maxfwd(10) it passes. It is impossible to call sr.modf("mf_maxfwd...") because it says about fixups. What's wrong? -- With best regards, Roman Galeev.

2 14

Prepaid billing solution for a service provider
by Carlo Dimaggio 09 Jan '12

09 Jan '12

Hi all, I'm working in a project for a service provider in which prepaid is an essential requirement. They have about 12000 subscribers. The core infrastructure will be Kamailio+RTPProxy while I have some doubts about the prepaid feature. I'm thinking about a B2BUA (SEMS or Freeswitch) that is called if the user belong to a "prepaid group" and perform authorization and accounting; in this case the SIP flow could be: Kamailio -> B2BUA(Prepaid) -> Kamailio. Is a good choice? At the moment I cannot estimate the effort needed to develop this section (base prepaid feature) of the project... Do you have some hints? What are the prepaid solution implemented by you? Do you use your own developed solution or do you think that is better to choose a commercial solution (that provide also calling-card and other features)? I have seen some commercial products (Portabilling, Jerasoft/Bilberry, ...); what do you think about? Best Regards,

6 8

Kamctl reload commands
by Uri Shacked 09 Jan '12

09 Jan '12

Hi, i am using different modules like "mtree", "carrierroute", "drouting" and so. how can i tell how long did the reload takes? how do i know if it fails? is there a way to get a return code from kamailio that confirms that the reload ended and successfuly? BR, Uri

3 4

Re: [SR-Users] Topoh Log Warning
by Daniel-Constantin Mierla 09 Jan '12

09 Jan '12

Hello, On 1/6/12 10:50 PM, Javier Vidal wrote: > Hi Daniel, problem solved!!! thanks, was a bad REGISTER, i was wrong. > > Thank you!!!! welcome, jut keep the mailing list always on cc, to help others to look for solutions of similar cases. Cheers, Daniel > > El 06/01/2012, a las 19:34, Daniel-Constantin Mierla escribió: > >> Hello, >> >> On 1/6/12 6:47 PM, Javier Vidal wrote: >>> Hi all, >>> >>> Two days ago, i had activated topoh module, and now in log file, when i receive a Options, appears this error >>> >>> /usr/sbin/kamailio[29936]: WARNING: topoh [th_msg.c:1063]: Invalid/Unparsed CSeq in message. Skipping. >>> >>> I dont' know solve it, only deactivating the topoh module!! >> does the OPTIONS have the CSeq header? Can you paste here an ngrep trace of such OPTIONS? >> >> The warning message is printed from a function that tries to detect whether is a REGISTER or PUBLISH, which are requests that don't get masked since they end to a service. >> >> Cheers, >> Daniel >> >> -- >> Daniel-Constantin Mierla -- http://www.asipto.com >> http://linkedin.com/in/miconda -- http://twitter.com/miconda >> -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Topoh Log Warning
by Javier Vidal 06 Jan '12

06 Jan '12

Hi all, Two days ago, i had activated topoh module, and now in log file, when i receive a Options, appears this error /usr/sbin/kamailio[29936]: WARNING: topoh [th_msg.c:1063]: Invalid/Unparsed CSeq in message. Skipping. I dont' know solve it, only deactivating the topoh module!! Sorry for my english. ;) Regards. Javier Vidal

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users