sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

Re: [SR-Users] set host as inactive and probing in dispatcher
by Uri Shacked 13 Dec '11

13 Dec '11

Hi, i tried to change the ds_probing_mode as well. it didn't do any good. i need the probing mode to be set to 1 anyway. so, any ideas? here is the cfg again: after the failure route i turn to this route "route[OSPRPLERR] { xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n"); if($avp(OSPRPL)!=404) { xlog("$C(rg) OSPRPL is $avp(OSPRPL)* now disable destination* $C(xx)\n"); ds_mark_dst("AP"); xlog("$C(rg) *after disabling destination* $C(xx)\n"); }" here is the log: 13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR sip:36264529@10.10.21.29 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog 13(5760) ERROR: <script>: OSPRPL is 408 *now disable destination *13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst 13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog 13(5760) ERROR: <script>: *after disabling destination* now i check the dispatcher list status: kamctl fifo ds_list SET:: 47 URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4 URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3 URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2 URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1 SET:: 41 URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4 URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3 URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1 URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2

2 7

Via header branch parameter in ACK message not unique
by Phillman25 Kyriacou 12 Dec '11

12 Dec '11

Dear List I'm currently facing an issue with a carrier whereby they are complaining that the via header branch parameter (sip.Via.branch == "z9hG4bKcydzigwkX") in the ACK messages is not unique which results in some calls being successful and some terminating after 20 seconds as their sip proxy determines it as a duplicate request. Is there a way to make the via header branch parameter in the ACK message unique across every transaction? Thanking you in advance for your assistance. Phillip

2 3

503 on DB Error
by Spencer Thomason 12 Dec '11

12 Dec '11

Hello all, Is it possible to configure Kamailio to reply to a request with a 503 if it cannot connect to a necessary database for the operation? I.e. Kamailio cannot connect to the database, when a REGISTER comes in and userloc can't find the credentials (due to DB failure), respond with a 503. The requesting endpoint can then fail over properly. The same behaviour would be desired for other modules as well, i.e. aliasdb. I noticed using 3.1.5 that it simply does not authorize the user. Thanks, Spencer

4 7

use of $stat(name)
by Uri Shacked 12 Dec '11

12 Dec '11

hi, anyone knows what is the options to use $stat ? in siremis there are some examples. but, where can i see what kind of names can i write in the (name) part and what kind of info do they give? thanks, Uri

2 1

Running Kamailio as non-root user
by Nathaniel L Keeling 09 Dec '11

09 Dec '11

I have just installed Kamailio 3.2 on Solaris sparc and would like to know what is the best way to have Kamailio to run under another userid, like kamailio. Thanks Nathaniel L Keeling

3 3

Download Kamailio Debian package problem.
by Gary Chen 09 Dec '11

09 Dec '11

I am trying to download GPG key as following and got connection timeout: wget http://deb.kamailio.org/kamailiodebkey.gpg It seems that the server is down. Where else can I download this same Debian package? Gary

2 1

TLS<-->UDP not working with record_route_preset
by Gnaneshwar Gatla 09 Dec '11

09 Dec '11

Hello All, I have setup the Kamailio 3.1.0 behind a NAT/firewall. I'm using record_route_preset() function to keep the Public IP(advertised_address) in the Route header. I have to setup a where TLS->UDP and UDP->TLS to work. The sip clients do TLS and we have third party sip clients that only do UDP. The problem, Kamailio does not do double record-route when I provide record_route_preset(). This is leading to a problem where the call is either hung on TLS or UDP. I'm unsure how to go around this problem. I had posted earlier about this problem, is there a way I could use the advertised_address in the record route headers in this case? Regards Gnani

2 1

set host as inactive and probing in dispatcher
by Uri Shacked 09 Dec '11

09 Dec '11

hi, i use "ds_select_domain()" to route a call. if the destination reply with an error i am using the next lines in a route that i called from the failure route: if($avp(OSPRPL)!=404) { ds_mark_dst("IP"); } after trying this line i do "kamctl fifo ds_list" and i see the host is still at "AX". and in the next call the dispatcher still tries the same destination. why? how do i set a destinatio in dispatcher to be inactive? this is my modparams: #!ifdef WITH_DISPATCHER #------ dispatcher params --------- modparam("dispatcher", "db_url", DBURL) modparam("dispatcher", "dst_avp", "$avp(dsdst)") modparam("dispatcher", "cnt_avp", "$avp(dscnt)") modparam("dispatcher", "grp_avp", "$avp(dsgrp)") modparam("dispatcher", "attrs_avp", "$avp(dsattrs)") modparam("dispatcher", "ds_ping_from", "sip:user@host.com") modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=405") modparam("dispatcher", "ds_ping_interval", 30) modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_hash_size", 8) modparam("dispatcher", "flags", 2) #!endif

3 3

unset host domain in dispatcher module
by Uri Shacked 09 Dec '11

09 Dec '11

Hi, i am using the dispatcher module in order to send the call to a LNP server. after the 3xx reply from the LNP server, i would like to send the invite back to the proxy that initiate the call from the beginnig. how do i do that? it seems that kamailio dispatcher sets the host domain in the Internet Protocol, and the sip request line does not change so to be short.. two questions: 1. how do i "undo" the dispatcher? 2. how do i make the dispatcher change the requst lineas well? (i am using ds_select_dst or ds_select_domain and they do the same...) the carrierroute module, do it better, but i need the dispatcher for the "keep alive" usage. ideas will be great :-) Uri

2 3

How to i use record_route_advertised_address
by Gnaneshwar Gatla 09 Dec '11

09 Dec '11

Hello, I have Kamailio 3.1.0 behind a NAT. We need the Firewall for sip-security reasons. Currently I'm using record_route_preset("advertised_Address") for keeping the advertised address in the record-route header. This works for fine when I have all clients running on UDP protocol. I currently have some TLS clients added to our network, Kamailio does not insert the second record-route header with the advertised-IP whenever there is a call between a UDP and a TLS Client. Instead it inserts the internal/Local IP of the server. I had also noticed the record_route_preset() function does not include the transport parameter ("transport=UDP" or "transport=TLS"). I was looking through the source code of Kamailio and found record_route_advertised_address() in record.c . I would like to know how to use this function with the Kamailio config. Regards Gnani

6 7

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users