sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

Re: [SR-Users] sr-users Digest, Vol 78, Issue 62
by Jonny Klompas 27 Nov '11

27 Nov '11

I think AllowOverride All is correctly set, you can see my config below: Contents of my /etc/apache2/sites-available/default file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Alias /siremis "/var/www/siremis-2.0.0/siremis" <Directory "/var/www/siremis-2.0.0/siremis"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from all <FilesMatch "\.xml$"> Order deny,allow Deny from all </FilesMatch> <FilesMatch "\.inc$"> Order deny,allow Deny from all </FilesMatch> </Directory> My rewrite.load file contains: LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so ________________________________ From: "sr-users-request(a)lists.sip-router.org" <sr-users-request(a)lists.sip-router.org> To: sr-users(a)lists.sip-router.org Sent: Wednesday, November 23, 2011 6:00 AM Subject: sr-users Digest, Vol 78, Issue 62 Send sr-users mailing list submissions to sr-users(a)lists.sip-router.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users or, via email, send a message with subject or body 'help' to sr-users-request(a)lists.sip-router.org You can reach the person managing the list at sr-users-owner(a)lists.sip-router.org When replying, please edit your Subject line so it is more specific than "Re: Contents of sr-users digest..." Today's Topics: 1. Re: Siremis installation problem (Elena-Ramona Modroiu) ---------------------------------------------------------------------- Message: 1 Date: Wed, 23 Nov 2011 09:15:51 +0100 From: Elena-Ramona Modroiu <ramona(a)asipto.com> Subject: Re: [SR-Users] Siremis installation problem To: sr-users(a)lists.sip-router.org Message-ID: <4ECCABB7.4010009(a)asipto.com> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Hi, do you have 'AllowOverride All' in your apache config? Regards, Ramona On 11/22/11 10:13 AM, Jonny Klompas wrote: > I do. > > Thanks > > Jonny > > ------------------------------------------------------------------------ > *From:* Elena-Ramona Modroiu <ramona(a)asipto.com> > *To:* Jonny Klompas <jonny.klompas(a)yahoo.com>; SIP Router - Kamailio > (OpenSER) and SIP Express Router (SER) - Users Mailing List > <sr-users(a)lists.sip-router.org> > *Sent:* Tuesday, November 22, 2011 10:57 AM > *Subject:* Re: [SR-Users] Siremis installation problem > > Hi, > > On 11/20/11 6:47 PM, Jonny Klompas wrote: >> Hi, >> >> When trying to access the Siremis home page to login after the >> installation, I receive the following error: >> >> The requested URL /siremis/index.php/user/login was not found on this >> server. > do you have mod_rewrite enabled on apache web server? > > Regards, > Ramona > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

2 3

db_mysql -> unhandled data type column
by Stephen Dodge (Bistech) 25 Nov '11

25 Nov '11

Hello, We are using Kamailio 3.1.5 in production. We use the sqlops module to run a mysql function to return parameters. In the logs I am seeing the flowing warnings. /usr/sbin/kamailio[3991]: WARNING: db_mysql [km_res.c:143]: unhandled data type column (diallednumber) type id (6), use DB1_STRING as default /usr/sbin/kamailio[3991]: WARNING: db_mysql [km_res.c:143]: unhandled data type column (ringtime) type id (6), use DB1_STRING as default I think these are generated when we return a null value, although this is not causing us a problem can anyone advise how to eliminate these warnings. Many Thanks Stephen Dodge ________________________________ Information in this message, including any attachments, is confidential to the person to whom it is addressed and may be legally privileged. If you are not the intended recipient please notify the sender and delete the message from your system. Please note that Bistech Group plc, Bistech plc, Bisnet Limited and the sender do not accept any responsibility for viruses. It is your responsibility to check the e-mail and any attachments for viruses. Calls may be monitored and recorded.

2 4

25 Nov '11

Hi All, Why in the kamailio 3.1.2 I have to give a sip_msg parameter to function register_tmcb when I want register a function of my module with TMCB_RESPONSE_OUT parameter? I can't understand this behavior... Best Regards

2 3

OPTIONS Module
by Stephen Dodge (Bistech) 24 Nov '11

24 Nov '11

Hello, I have installed Kamailio 3.1.5 on Centos 5.5 using the kamailio-3.1.5-4.1.x86_64.rpm. I have a requirement that our Kamailio server supports SIP OPTIONS, looking through the module list it looks like the OPTIONS module is the way to go, unfortunately my install only includes the module and module_k Kamailio Modules. Is the only option to compile the OPTIONS module from source or is there a better way to configure Kamailio to respond to SIP OPTIONS? Thanks Stephen Dodge ________________________________ Information in this message, including any attachments, is confidential to the person to whom it is addressed and may be legally privileged. If you are not the intended recipient please notify the sender and delete the message from your system. Please note that Bistech Group plc, Bistech plc, Bisnet Limited and the sender do not accept any responsibility for viruses. It is your responsibility to check the e-mail and any attachments for viruses. Calls may be monitored and recorded.

2 2

configuration
by Rohit Bhatnagar 24 Nov '11

24 Nov '11

I am trying to configure a VOIP phone. I do not know the setting. Alfa Color Wireless VoIP Internet IP Wifi Phone The setting are : Registrar Server IP and Port address Outbound Proxy Server IP and Port address

2 1

Problem to relay sip message recieved port 9090 to asterisk port 7160
by arif tuhin 24 Nov '11

24 Nov '11

I'm Trying to relay sip messages from sip client to asterisk. Kamailio should accept the msg on 9090 udp port and it will forward the sip message to 7160 udp port of Asterisk. I thought the default cfg file will be enough to accomplish this simple task. But kamailio is receiving the msg ok but its not forwarding the msg. Another interesting thing is if i enable tls and give a tls port of kamailio , it easily forwards and the client registers ok. With Best Regards

2 5

gracefuly stop kamailio
by Uri Shacked 24 Nov '11

24 Nov '11

hi, i am trying to deploy a way to gracefuly stop kamailio. the goal is to stop new incoming calls, wait for all active calls to end (i guess dialog module is a must...) and then, shutting down kamailio..... any ideas will be great....

2 1

Re: [SR-Users] simple proxy
by Daniel-Constantin Mierla 23 Nov '11

23 Nov '11

Hello, keep the mailing list cc-ed, private messages from public mailing list discussions are going to be discarded. See the comments inline. On 11/23/11 12:20 PM, Iurii Andamasov wrote: > Hello Daniel, > i > 23.11.2011, в 8:43, Daniel-Constantin Mierla написал(а): > >> Hello, >> >> On 11/23/11 4:02 AM, Iurii Andamasov wrote: >>> Hello list. >>> First of all sorry for dump question, i'm pretty new to kamailio so i hope someone point me in right direction >>> >>> currently i have one sip device which can handle sip request only from one ip, >>> my goal is to put kamailio in front of it so i can proxy requests from several ips >>> >>> i added this to conf >>> >>> route{ >>> if ( src_ip == 10.46.1.121 || src_ip == 10.46.1.122 ) { >>> if(method == "INVITE") { >>> $rd="10.46.29.10"; >>> t_relay(); >>> } >>> } >>> >>> and calls seems connecting but signaling is completely broken >>> >>> i understand that i'm doing something wrong, but can't get what is wrong >> can you explain what is broken and what you would expect to happen? > seems that occurs timeouts, from your next message i understand why, > what i need it just to pass call through kamailio from that 2 ips If you need to route all requests within a call through kamailio, then you need to use loose routing (see rr module). Maybe it would be easier for you to start with an existing example of config, if the default config is too big to understand, maybe the one from dispatcher is simpler: http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004 It has the parts of routing requests within dialog, you need to replace the part that uses dispatcher module with your forwarding to a specific ip (or use dispatcher and have that ip as single destination there). Before line 'route(DISPATCH);' add the condition to deny INVITEs that don't match the trusted source ips: if ( ! (src_ip == 10.46.1.121 || src_ip == 10.46.1.122 )) { send_reply("403", "Forbidden"); exit; } Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda

2 2

Siremis v2.1.0 Released
by Elena-Ramona Modroiu 23 Nov '11

23 Nov '11

Siremis v2.1.0 has been released - this is an update to previous release v2.0.0, bringing several enhancements and new web pages to manage PUA and RLS. It is still compatible with Kamailio v3.1.x, the last of this kind, next one to be out in the near future will be compatible with Kamailio v3.2.x. You can find the news about this release, including links to download, screenshots and demos, at: * http://siremis.asipto.com/2011/11/23/siremis-v2-1-0-released/ Alternative download site (tarball or git pull) is from sourceforge project: * http://sourceforge.net/projects/siremis/ Regards, Ramona PS. Siremis v2.1.0 is working for most of the components with Kamailio 3.2.0, just the few that changed the database structure may not be fully functional (e.g., the modules with tables that have new columns, see http://www.kamailio.org/wiki/install/upgrade/3.1.x-to-3.2.0#sql_commands).

1 0

releasing v3.2.1
by Daniel-Constantin Mierla 23 Nov '11

23 Nov '11

Hello, I plan to package v3.2.1 after mid of next week (most probably on Thursday) -- it is about 1 month and a half since 3.2.0 was released and branch 3.2 accumulated a bunch of patches. Anyone having comments about it? Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users