sr-users

sr-users@lists.kamailio.org

1 participants
37563 discussions

rtpproxy_stream2uac
by s.maertens＠telenet.be 12 Jul '11

12 Jul '11

Hi, I am trying to get kamailio (or more specific rtpproxy) to play a wav file when a call is setup In kamailio.cfg I have added the command in the onreply_route rtpproxy_startrecording(); rtpproxy_stream2uas("/var/log/rtpproxy/message","-1"); I am sure the command is executed and given from kamailio to rtpproxy because in syslog I see following output (using dbug output of rtpproxy) rtpproxy[2648]: DBUG:handle_command: received command "P-1 024a73d95bbe016014de647e700 /var/log/rtpproxy/behappy session 487095817;1 024a73d95bbe015f14de647e700;1" rtpproxy[2648]: DBUG:doreply: sending reply "E6#012" rtpproxy[2648]: DBUG:handle_command: received command "R 024a73d95bbe016014de647e700 487095817 024a73d95bbe015f14de647e700" rtpproxy[2648]: DBUG:doreply: sending reply "0#012" The "R" command is the startrecording command and that is indeed working perfect. (recording to /var/log/rtpproxy) The "P" command is the "Playing or stream2uas" command. Seems that the message rtpproxy gets differs a bit from the one I found in the rtpproxy manual from the manual : P[args] callid play_name codecs from_tag to_tag Direction of the playback is defined by the order of the from_tag and to_tag parameters. R callid from_tag to_tag I have used the command " makeann behappy.wav behappy" to convert a wavfile. It gave me a .0 and .a file which I have placed in the /var/log/rtpproxy directory (makeann comes with the rtpproxy source and is rather a bit shy with information to say the least ;) ) There is not too much information or examples found about this so I was hoping maybe somebody on this list could help me in finding out why i'm not getting more information in syslog and why i'm not hearing the audiofile. Best regards

2 3

transformation and PVAR
by Vitaliy Aleksandrov 11 Jul '11

11 Jul '11

>From the transformations documentation: >>{s.strip,len} >>Return string after removing starting 'len' characters. Parameter 'len' can be positive integer or pseudo-variable holding a positive integer. I tried to use pvar holding len but got an error: Jul 11 14:51:37 localhost /usr/sbin/kamailio[16905]: ERROR: pv [pv_trans.c:434]: select cannot get p1 Jul 11 14:51:37 localhost /usr/sbin/kamailio[16905]: ERROR: <core> [lvalue.c:351]: non existing right pvar This is part of my config file: $avp(varname) = '1'; <---- pseudo variable holding a positive integer $avp(result) = $(fU{s.strip,$avp(varname)}); <---- s.strip How can i use variables with transformation ?

2 1

transformation and pvar
by Vitaliy Aleksandrov 11 Jul '11

11 Jul '11

>From the transformations documentation: > {s.strip,len} > Return string after removing starting 'len' characters. Parameter 'len' can > be positive integer or pseudo-variable holding a positive integer. I tried to use pvar holding len but got an error. Jul 11 14:51:37 localhost /usr/sbin/kamailio[16905]: ERROR: pv [pv_trans.c:434]: select cannot get p1 Jul 11 14:51:37 localhost /usr/sbin/kamailio[16905]: ERROR: <core> [lvalue.c:351]: non existing right pvar This is part of my config file: $avp(varname) = '1'; <---- pseudo variable holding a positive integer $avp(result) = $(fU{s.strip,$avp(varname)}); <---- s.strip How can i use variables with transformation ?

1 0

Memcached Module
by Spencer Thomason 11 Jul '11

11 Jul '11

Hello all, I'm interested in using the memcached module however it requires libmemcache instead of libmemcached. As libmemcache is no longer supported I was curious if anyone had successfully patched the module to use libmemcached instead. Also as a side note, the provided rpm spec files in the git repo erroneously contains a reference to libmemcached. Thanks, Spencer

2 1

Employment opportunity
by miklos＠iptel.org 10 Jul '11

10 Jul '11

Spam detection software, running on the system "mail.iptel.org", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or label similar future email. If you have any questions, see the administrator of that system for details. Content preview: Salute! I take up a position of HR manager in a large multinational company. Our enterprise is inseparably connected with a great number of various activities, like: - estate property - founding and abatement of enterprises - supporting in opening of banking accounts - etc. [...] Content analysis details: (23.1 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.7 URIBL_BLACK Contains an URL listed in the URIBL blacklist [URIs: totaljoblists.net] 1.6 URIBL_WS_SURBL Contains an URL listed in the WS SURBL blocklist [URIs: totaljoblists.net] 1.7 URIBL_DBL_SPAM Contains an URL listed in the DBL blocklist [URIs: totaljoblists.net] 3.5 BAYES_99 BODY: Bayes spam probability is 99 to 100% [score: 0.9981] 3.2 FH_HELO_EQ_D_D_D_D Helo is d-d-d-d 3.3 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL [2.60.89.135 listed in zen.spamhaus.org] 0.4 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL 1.3 RCVD_IN_BL_SPAMCOP_NET RBL: Received via a relay in bl.spamcop.net [Blocked - see <http://www.spamcop.net/bl.shtml?2.60.89.135>] 1.3 RCVD_IN_RP_RNBL RBL: Relay in RNBL, https://senderscore.org/blacklistlookup/ [2.60.89.135 listed in bl.score.senderscore.com] 1.4 RCVD_IN_BRBL_LASTEXT RBL: RCVD_IN_BRBL_LASTEXT [2.60.89.135 listed in bb.barracudacentral.org] 0.7 SPF_SOFTFAIL SPF: sender does not match SPF record (softfail) 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines 1.0 RDNS_DYNAMIC Delivered to internal network by host with dynamic-looking rDNS 0.0 T_URIBL_BLACK_OVERLAP T_URIBL_BLACK_OVERLAP 2.0 HELO_DYNAMIC_IPADDR Relay HELO'd using suspicious hostname (IP addr 1)

1 0

Job offer match, respond to apply
by miklos＠iptel.org 09 Jul '11

09 Jul '11

Spam detection software, running on the system "mail.iptel.org", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or label similar future email. If you have any questions, see the administrator of that system for details. Content preview: Hello! I am a superintendent of Human Resources department of a large international company. Our company takes an active part in the life of its subsidiaries, for instance: \ real estate \ logistics \ private undertaking service \ etc. [...] Content analysis details: (12.1 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 3.3 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL [212.164.140.23 listed in zen.spamhaus.org] 1.7 URIBL_BLACK Contains an URL listed in the URIBL blacklist [URIs: totaljoblists.net] 1.6 URIBL_WS_SURBL Contains an URL listed in the WS SURBL blocklist [URIs: totaljoblists.net] 1.7 URIBL_DBL_SPAM Contains an URL listed in the DBL blocklist [URIs: totaljoblists.net] 1.4 RCVD_IN_BRBL_LASTEXT RBL: RCVD_IN_BRBL_LASTEXT [212.164.140.23 listed in bb.barracudacentral.org] 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines 1.5 BAYES_60 BODY: Bayes spam probability is 60 to 80% [score: 0.6047] 0.0 T_URIBL_BLACK_OVERLAP T_URIBL_BLACK_OVERLAP 0.8 RDNS_NONE Delivered to internal network by a host with no rDNS

1 0

on_reply and failure route names
by Fabian Borot 08 Jul '11

08 Jul '11

Hi Is it possible to use string names also for on_reply and failure_route blocks? I guess these errors when starting kamailio Jul 8 10:00:25 registrar kamailio: : <core> [cfg.y:3412]: parse error in config file /usr/local/kamailio-3.1//etc/kamailio//kamailio.cfg, line 432, column 41: syntax error Jul 8 10:00:25 registrar kamailio: : <core> [cfg.y:3412]: parse error in config file /usr/local/kamailio-3.1//etc/kamailio//kamailio.cfg, line 432, column 41: '('')' expected (function call) Jul 8 10:00:25 registrar kamailio: : <core> [cfg.y:3412]: parse error in config file /usr/local/kamailio-3.1//etc/kamailio//kamailio.cfg, line 432, column 41: function t_on_reply: parameter 1 is not constant Jul 8 10:00:25 registrar kamailio: : <core> [cfg.y:3412]: parse error in config file /usr/local/kamailio-3.1//etc/kamailio//kamailio.cfg, line 432, column 41: bad command thank you fborot

3 5

following the path a request take in the config file
by Fabian Borot 08 Jul '11

08 Jul '11

Hi Is there a way of tracing the path a request takes as it is being processed by the config file? Aside from logging using xlog(). I am not sure whether I read about this some where on the web , but I am under the impression that starting on version 3.x there was going to be a similar feature. please advise fborot

2 2

Loading multiple htables from db on startup? (Kamailio 1.5)
by Robin Rodriguez 08 Jul '11

08 Jul '11

Hi all, Currently running on 1.5.4-notls and using a single htable that gets loaded at startup ala modparam("htable", "htable", "local_routes=>size=4;autoexpire=0;dbtable=TABLE_A;") modparam("htable", "key_name_column", "NAME_1") modparam("htable", "key_value_column", "VALUE_1") modparam("htable", "fetch_rows", 512) This works great, the problem I've run into is attempting to load a second htable on startup whose data comes from a different table/scheme ala modparam("htable", "htable", "inbound_acl=>size=4;autoexpire=0;dbtable=TABLE_B;") modparam("htable", "key_name_column", "NAME_2") modparam("htable", "key_value_column", "VALUE_2") modparam("htable", "fetch_rows", 512) With both of them in the config file Kamailio fails to start with the error INFO:core:init_mod: initializing module htable ERROR:db_mysql:db_mysql_submit_query: driver error on query: Unknown column 'NAME_2' in 'field list' 'NAME_2' does not exist in 'TABLE_1' so that seems to suggest that only the first dbtable value is used, the SQL side supports this: select NAME_2,key_type,value_type,VALUE_2 from TABLE_A order by key_type So it uses the first defined database table, but then the last defined key_name and key_value. Is there any way that I've overlooked in the docs or elsewhere about about loading multiple htables from different database tables? I'd like to use this htable in an ACL and would like to avoid database hits though can make it work with avpops if I have to. Any suggestions are greatly appreciated. Thanks, Robin

3 3

Dialplan question
by alex pappas 08 Jul '11

08 Jul '11

Dear all, I have these 3 entries in the dialplan: dpid pr match_exp attr 2 50 ^38.+ porvider_A 2 50 ^3802.+ porvider_B 2 50 ^3806.+ porvider_C with the fifo command : *kamctl fifo dp_translate 2 3806328881* Output:: ATTRIBUTES::* porvider_A* I would expect that the dialplan module would choose the third choice which is the correct one for this call. >From the dialplan documentation i understand that the priority is needed when the prefixes are overlaping in terms of they are the same but with different attrs like : 2 50 ^38.+ porvider_A 2 50 ^3802.+ porvider_B *2 50 ^3806.+ porvider_C* *2 50 ^3806.+ porvider_D* * * here i understand that I should use priorities. Does anyone knnows how this works ?? Thank you in advance Alex * *

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users