sr-users

sr-users@lists.kamailio.org

34 participants
37388 discussions

Detect RTP stream end (Kamailio + rtpengine)
by Rawad Kassir 11 May '22

11 May '22

Hello, I am trying to play early media purely relaying on kamailio and i have accomplished that using the below: rtpengine_manage(); append_to_reply("Content-Type: application/sdp\r\n"); $var(body)= $(rb{re.subst,/(IP4.).*/\127.0.0.1/g}); set_reply_body($var(body), "application/sdp"); send_reply("100","Trying"); send_reply("183","Session In Progress"); play_media("totag=$ft file=/home/rawad/test.wav"); My problem is that once the RTP stream starts the call is kept open so my question is is there a way for kamailio to detect the end of rtp stream so that i can send BYE or can kamailio do that automatically.

1 0

Proxy for ACK
by Rick van Rein 09 May '22

09 May '22

Hello, RFC 3261 gives (by way of example) an ACK that is sent directly to a remote phone via its Contact: header address. Is this the _only_ way of doing this, or may ACK also be passed through a SIP proxy? I found that my Kamailio setup does not forward ACK, and I wonder why; whether that is a common refusal, or my fault in modifying the proxy script. I am working on an IPv4-only to IPv6-only translation proxy, and would like to leave the DNS-related work to a more advanced SIP proxy. The translator is supposed to be small/simple, so it can be integrated into home routers. I would like to avoid DNS resolution (and its delays) for Contact: URIs. Proxy script, https://gitlab.com/arpa2/mkroot/-/blob/master/contrib/sip-trunk/etc/kamaili… SIPproxy64 translator, https://gitlab.com/0cpm/sipproxy64 Thanks, -Rick

2 4

dns_query container no found
by David Villasmil 06 May '22

06 May '22

Hello guys, I'm trying to use: if(dns_query("$du", "xyz")) And all I get is dns_update_pv(): container not found: xyz Any ideas? I'm not really sure what that means. I know there's supposed to be a $dns(xyz) but it looks like it's not there? I'm using 5.0 BTW. Thanks all & Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 2

calling failure_route
by David Villasmil 06 May '22

06 May '22

Hello guys, Is it possible to call a failure_route like a normal route? i.e.: { t_on_failure("myroute"); } ... route("myroute"); failure_route[myroute] { ... } Let me explain: I have this scenario where a DNS name may get deleted and a dns resolution will fail. There's no pinging to that gateway so i need to: - skip that gateway when dispatching to the setid - detect whether the domain is up and available And failover to the next gateway. I don't know of any other way so on the DISPATCH route, I'm doing: route[DISPATCH] { # round robin dispatching on gateways group '1' if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } xlog("L_DBG", "--- SCRIPT: going to <$ru> via <$du>\n"); if(dns_query("$du", "xyz")) { t_on_failure("RTF_DISPATCH"); route(RELAY); } else { route(RTF_DISPATCH); } exit; } to try to resolve and if it fails, it will just go to the failover route. makes sense? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

3 4

BYE is being sent using the Dialog ID (did)
by mack＠dopensource.com 06 May '22

06 May '22

I configured the dialog module to match routing based on SIP elements versus the (Dialog ID) did. It looks like it’s using the callid SIP element, but it’s still looking it up using the dialog module. I was hoping it would route on the RURI of the BYE. But, it looks like it’s using the dialog lookup table, which has the wrong RURI because that was the original server we sent the request to. How can I get Kamailio to route based on the RURI within the BYE. May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: rr [rr_cb.c:94]: run_rr_callbacks(): callback id 0 entered with <lr> May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:887]: internal_get_dlg(): ref dlg 0x7f6d97faf200 with 1 -> 3 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:891]: internal_get_dlg(): dialog callid='oeIojv5OA59S9FYCCu7BcQ..' found on entry 777, dir=2 to-tag='sip+3+f36a00a5+44b60208' May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_profile.c:536]: set_current_dialog(): setting current dialog [777:1428] May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1290]: next_state_dlg(): dialog 0x7f6d97faf200 changed from state 4 to state 5, due event 7 (ref 3) May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1071]: dlg_ref_helper(): ref op on 0x7f6d97faf200 with 1 from dlg_handlers.c:1441 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1075]: dlg_ref_helper(): ref dlg 0x7f6d97faf200 with 1 -> 4 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_handlers.c:1452]: dlg_onroute(): BYE successfully processed May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1091]: dlg_unref_helper(): unref op on 0x7f6d97faf200 with 2 from dlg_handlers.c:1476 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1095]: dlg_unref_helper(): unref dlg 0x7f6d97faf200 with 2 -> 2 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1091]: dlg_unref_helper(): unref op on 0x7f6d97faf200 with 1 from dlg_hash.c:1109 May 5 06:28:13 sbc-atlanta /usr/sbin/kamailio[27066]: DEBUG: dialog [dlg_hash.c:1095]: dlg_unref_helper(): unref dlg 0x7f6d97faf200 with 1 -> 1 Thanks in advance

2 1

Tips on picking random element from a list
by Joel Serrano 05 May '22

05 May '22

Hi Everyone, I have to implement a flow where outbound calls get their caller-id set with a random number from a pool. I've been looking around and, as most of the time, there are tons of ways to implement something like this... This is a simple implementation, the number pool is fixed and will not change (so I could have it hard-coded in the config if required). My initial approach was: 1- Try to keep it simple, with no dependencies, and all done in the config script. 2- If #1 is "ugly", then I'd probably go with some inline code using python/lua/etc 3- If #2 is "ugly", then I'd go with having the info in a DB and just run a query I think #2 and #3 might be overkill for something so "simple" but I haven't had to work too much with randomness in Kamailio, so any tips/suggestions on where to store the number list and how to pick one randomly would be awesome! Thanks!! Joel.

5 7

failover on dns resolve error
by David Villasmil 05 May '22

05 May '22

Hello guys, I have a scenario where a dns name I've added as a dispatcher endpoint may get removed completely, i.e.: dns resolution fails completely. How would you recommend implementing failover in this case? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 0

iterating over htable with lua
by David Villasmil 05 May '22

05 May '22

Hello guys, I'm trying to iterate over an htable in lus, this is what i have: =================================== loadmodule "app_lua.so" modparam("app_lua", "load", "/etc/kamailio/myscript.lua") modparam("htable", "htable", "mydata=>size=16;autoexpire=0;dbtable=mydata;dbmode=0;") route { lua_run("match_mydata"); } ... function match_mydata() KSR.htable.sht_iterator_start("i1", "mydata") while KSR.htable.sht_iterator_next("i1") do KSR.log("err","WHILE: iterating on: " .. KSR.htable.sht_get("mydata", "i1")) end KSR.htable.sht_iterator_end("i1"); end But i keep getting: 0(1255) DEBUG: app_lua [app_lua_api.c:666]: app_lua_run_ex(): executing Lua function: [[match_mydata]] 0(1255) DEBUG: app_lua [app_lua_api.c:668]: app_lua_run_ex(): lua top index is: 12 0(1255) ERROR: app_lua [app_lua_api.c:719]: app_lua_run_ex(): error from Lua: /etc/kamailio/myscript.lua:11: attempt to call field 'sht_iterator_start' (a nil value) 0(1255) ERROR: app_lua [app_lua_api.c:734]: app_lua_run_ex(): error executing: match_mydata (err: 2) This almost exact same thing works on the cfg: sht_iterator_start("i1", "msrn"); while(sht_iterator_next("i1")) { xlog("data: $shtitkey(i1)\n"); } sht_iterator_end("i1"); Anyone know what I could be doing wrong? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 1

Development is open for future release of v5.7.x series
by Daniel-Constantin Mierla 05 May '22

05 May '22

Hello, the branch 5.6 was created, therefore the master branch is open for adding new features, to be part of future release series v5.7.x (or whatever version is decided for next series). Any bug fix committed to master that applies to 5.6.x or older stable branches should be backported as usual with "git cherry-pick -x ..." to appropriate branches like 5.6 or 5.5. Expect that v5.6.0 will be released in a few weeks from now. Based on the workflow used during the past years, the next future release v5.7.0 should be out after another 6-10 months of development, plus 1-2 months of testing, so sometime by end of 2022 or in the first part of 2023. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online * https://www.asipto.com/sw/kamailio-advanced-training-online/

1 0

Branch 5.6 has been created
by Daniel-Constantin Mierla 05 May '22

05 May '22

Hello, the branch 5.6 has been created, to be used for releasing v5.6.x series. To check out this branch, the following commands can be used: git clone https://github.com/kamailio/kamailio kamailio-5.6 cd kamailio-5.6 git checkout -b 5.6 origin/5.6 Pushing commits in this branch: git push origin 5.6:5.6 Note that 5.6 is an official stable branch, so only bug fixes, missing kemi exports (discuss on sr-dev if not sure) or improvements to documentation or helper tools can be pushed to this branch. As usual, if there is a bug fixed, commit and push first to master branch and then cherry pick to 5.5 branch: git cherry-pick -x COMMITID In few weeks, the first release from branch 5.6 will be out, respectively Kamailio v5.6.0. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online * https://www.asipto.com/sw/kamailio-advanced-training-online/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users