sr-users

sr-users@lists.kamailio.org

37 participants
37511 discussions

Run PCSCF without IPSec
by Weiqi Yao 30 Jun '22

30 Jun '22

Hello Community, We are running Kamailio with 3 instances as PCSCF/ICSCF/SCSCF, and we don't want IPsec to be used in between PCSCF and UE and we confirmed the initial Register UE send do not have the Security-Client header. However, seems the IPsec is enabled by default in current PCSCF cfg, we tried to comment WITH_IPSEC as well as couple ipsec_forward function out in the cfg, but when the 401 Challenging message send to PCSCF and PCSCF failed to forward it to UE due to (Create ipsec failed) reason. So I want to reach out and see if anyone have experience not using IPsec with currently Kamailio PCSCF? Any clue or comment will be appreciated! BR, Weiqi

1 0

Makefile.rules:191: recipe for target 'tlsa.so' failed
by Abdoul Osséni 30 Jun '22

30 Jun '22

Hello, Cannot compile tlsa module. I get the following error message: LD (gcc) [M tlsa.so] tlsa.so /usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/4.9/../../../x86_64-linux-gnu/libssl.a(ssl_lib.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC /usr/lib/gcc/x86_64-linux-gnu/4.9/../../../x86_64-linux-gnu/libssl.a: error adding symbols: Bad value collect2: error: ld returned 1 exit status ../../Makefile.rules:191: recipe for target 'tlsa.so' failed make[2]: *** [tlsa.so] Error 1 Makefile:511: recipe for target 'modules' failed make[1]: *** [modules] Error 1 make[1]: Leaving directory '/usr/local/src/kamailio-5.6/kamailio/src' Makefile:34: recipe for target 'all' failed make: *** [all] Error 2 Please find below some information about my environment system: root@sbc:/usr/local/src/kamailio-5.6/kamailio# cat /etc/debian_version 8.6 root@sbc:/usr/local/src/kamailio-5.6/kamailio# openssl version OpenSSL 3.0.4 21 Jun 2022 (Library: OpenSSL 3.0.4 21 Jun 2022) Regards Abdoul

2 1

Install Kamailio in captive network
by Rahul mm 30 Jun '22

30 Jun '22

Hello guys, Ab initio, I'm loving Kamailio and the endless horizons it opens-up. Is there any document somewhere to get Kamailio installed in a captive network that runs w/o internet? I know this seems bizarre but in the mining industry most of the locations do not have internet facilities but they still want to use VoIP. I do not have the privilege to pull a blade system and put it on the internet to install Kamailio, FS etc. Any suggestions? -- Warm Regds. MathuRahul

4 5

Forward reply in onreply_route
by Carsten Bock 29 Jun '22

29 Jun '22

Hi, Question: Is there a way to forward a reply from the reply route and do other stuff afterward? We are currently doing operations on a 183 reply and it would be useful if we could forward the reply before continuing to process other stuff. High-Level example: *route { t_on_reply("REPLY"); t_relay();}onreply_route[REPLY] { // Forward the reply to the Caller t_relay(); // Does not work, as t_relay is only allowed in request and failure-routes // Do other fancy stuff, e.g. a DB Update or anything else}* Any ideas? Thanks, Carsten -- Carsten Bock I CTO & Founder ng-voice GmbH Trostbrücke 1 I 20457 Hamburg I Germany T +49 179 2021244 I www.ng-voice.com Registry Office at Local Court Hamburg, HRB 120189 Managing Directors: Dr. David Bachmann, Carsten Bock

6 5

SIP Proxy Challange
by Mihai 27 Jun '22

27 Jun '22

Hello ! I have this issue with the telco provider they give the sip trunk on a private connection with private ips, the problem is that i am trying to relocate the sip trunk in remote server and I've tried though basic networking/tunnels/vpn and no go; their sbc is dropping requests and rejects if they are more via headers, they force me to use that connection and the ip allocated. The challenge is how to do this in kamailio, basically I just want to transport the trunk (similar to a reverse proxy for web) to its new destination and from there handle everything. Any hints on how to achieve this?

3 2

Phones are not getting registered. Is my setup correct?
by Farhan Sahariar (CSSD) 27 Jun '22

27 Jun '22

Hi, I have just installed Goautodial v4. I have followed all the guide to register a phone but this does not work. Is kamailio the reason. I am new to linux need help. [root@vaglxc01 ~]# systemctl status kamailio ● kamailio.service - Kamailio (OpenSER) - the Open Source SIP Server Loaded: loaded (/usr/lib/systemd/system/kamailio.service; enabled; vendor preset: disabled) Active: failed (Result: start-limit) since Sun 2022-06-26 16:11:41 +06; 10min ago Process: 1545 ExecStart=/usr/sbin/kamailio -DD -P /var/run/kamailio/kamailio.pid -f $CFGFILE -m $SHM_MEMORY -M $PKG_MEMORY (code=exited, status=255) Main PID: 1545 (code=exited, status=255) Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: Unit kamailio.service entered failed state. Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: kamailio.service failed. Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: kamailio.service holdoff time over, scheduling restart. Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: start request repeated too quickly for kamailio.service Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: Failed to start Kamailio (OpenSER) - the Open Source SIP Server. Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: Unit kamailio.service entered failed state. Jun 26 16:11:41 vaglxc01.goautodial.com systemd[1]: kamailio.service failed. Jun 26 16:11:47 vaglxc01.goautodial.com systemd[1]: start request repeated too quickly for kamailio.service Jun 26 16:11:47 vaglxc01.goautodial.com systemd[1]: Failed to start Kamailio (OpenSER) - the Open Source SIP Server. Jun 26 16:11:47 vaglxc01.goautodial.com systemd[1]: kamailio.service failed. [root@vaglxc01 ~]# kamailio -version version: kamailio 5.0.7 (x86_64/linux) 743c2d flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 743c2d compiled on 03:02:32 Aug 26 2018 with gcc 4.8.5 Best regards, Farhan Sahariar Assistant Manager Customer Support Services Division LEADS Corporation Limited [Description: Description: Green Living Slogan_Email]

3 6

How to handle a 301 redirect request from a client?
by Benoît Panizzon 27 Jun '22

27 Jun '22

Hi Gang We want to allow customers to send a 301 to forward calls to mimik ISDN PARE. The new destination is in the contact user HF. So I guess I could handle this on the t_on_failure route to catch that error, extract the contact user HF, craft an appropriate Diversion header and send the call on. But I wonder, is there maybe a module which handles all of this out of the box? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 11

kamailio + sems for early media
by mohsen khashei 25 Jun '22

25 Jun '22

2 2

update PAI Header User part
by Patrick Karton 24 Jun '22

24 Jun '22

hello is there a cleaner/fastest way to update PAI header user part other than using subst i come up with subst('/^P-Asserted-Identity:(.*)(sip|sips|tel|tels):([^@]*)@([a-zA-Z0-9.]+)(.*)$/P-Asserted-Identity:\1\2:$var(newPAIUser)@\4\5/ig'); Thanks.

2 1

Append (not replace) line to SDP body
by Benoît Panizzon 24 Jun '22

24 Jun '22

Hi Gang Next question. I have some broken CPE which do not set a=ptime despite using 20ms which then causes the call to get rejected in certain destinations, because ptime header is missing. So I would like to match the user-agents in question and add back a=ptime:20 Google searches found an user with the exact same problem almost 10 years ago and Daniel replying that indeed a function to add a body line would be handy. https://www.kamailio.org/docs/modules/devel/modules/textops.html How could this be accomplished? I don't see a add_body_line or other function which does not 'replace' a body line. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users