sr-users

sr-users@lists.kamailio.org

37388 discussions

get kamailio sip processes id
by Patrick Karton 14 Feb '22

14 Feb '22

hello, as we are all aware kamailio create a lot of processes for many tasks. im using kamailio in kubernetes and i would like to monitor only sip processes with top command. i only need a way to get only kamailio sip processes id (udp receiver that handle sip request) . but i dont knwo how to get it. top -c -p id1,id2,id3,id4 Thanks

3 5

SEMS license with kamailio and rtpengine
by Patrick Karton 14 Feb '22

14 Feb '22

Hello im using kamailio and rtpengine to build a custom SBC. i was using freeswitch as my b2bua but i noticed a lot of issues when cps and simultaneous increased so i tried sems and i have better results. But i do not really understand sems license so i want to know if i can use it. i read from sems github "It is licensed under dual license terms, the GPL (v2+) and proprietary license. This program is released under the GPL with the additional exemption that compiling, linking, and/or using OpenSSL is allowed. For a license to use SEMS under non-GPL terms, please contact FRAFOS GmbH at info(a)frafos.com" so my question is if i want to use sems as b2bua with kamailio and rtpengine and make profit of it do i need to purchase a license each time i want to sell it to a customer ? Thanks.

7 39

Kamailio server behind NAT
by Tihomir Culjaga 13 Feb '22

13 Feb '22

Hi all I'm wondering what is best practice to configure kamailio for a setup shown below. Carriers only support interconnection over a private network so I need to terminate every separate network on kamailio machine (and on RTPEngine) . That will turn very quickly into an administration nightmare as we add more and more carriers. My plan is to terminate carrier private networks on a router and NAT the traffic to kamailio where it leads me to a kamailio behind NAT setup. Well, in theory set_advertised_address and set_advertised_port per message can do the trick... at least I hope. Also, some carriers require a SIP registration to activate SIP trunks. I do that using UAC module (remote registration) but here again I got a problem with contact address as you can set only one contact address (modparam("uac", "reg_contact_addr", "10.1.1.11:5060")). /--RTP 10000-19999-- RTPEngine1 -----RTP------+-- IPPBX1 carrier1 --- NAT ---| | | | | | carrier2 --- NAT ---+-----SIP 5060------ kamailio ----SIP---- Dispatcher | | | carrier3 --- NAT ---| | | \--RTP 20000-29999-- RTPEngine2 -----RTP------+-- IPPBX2 So bottom line, I'm wondering what would be the best practice for such a scenario ? That would spare me from hitting many pitfalls. Would really appreciate a hint. Regards, Tihomir.

3 3

Vo5G with open5gs
by Hornbuckle, Mark A 11 Feb '22

11 Feb '22

Hello, I have been trying to find documentation on Kamailio IMS and Vo5G support for open5gs. I wanted to ask you directly if Kamailio IMS does support Vo5G with open5gs? Thank you

1 0

resending same message from UE after receiving RP-ACK
by Eugene B 11 Feb '22

11 Feb '22

Hi, I trying to use smsops module as SMSC. When I sending message from UE I see re-sending same message after each RP-ACK(~10 attempt). What could be the problem? Thanks! pcap in attach. kamailio 5.3.2 -- *Yours faithfully,* *Eugene B.*

2 1

kamilio open5gs 5G SA compatible?
by Sandland, Seth P 11 Feb '22

11 Feb '22

Were looking to test a kamilio on Open5gs 5g stand alone ( non lte, non NSA) can you conform or provide documents or install instructions on how this is accomplished. I can not find much of any details if Kamilio support Open5Gs 5g SA and what features it does support on a 5g SA core. Seth Sandland Wireless Communications IT Engineer Pacific Northwest National Laboratory Tel: (509) 375-6842 Email: seth.sandland(a)pnnl.gov<mailto:seth.sandland@pnnl.gov> www.pnnl.gov<http://www.pnnl.gov/> [A close up of a logo Description automatically generated]

1 0

Publish XML and xpath
by Igor Olhovskiy 10 Feb '22

10 Feb '22

Hello, I'm trying to get state of endpoint from PUBLISH message in a most simple way using xmlops module Trying to make this $xml(body=>doc) = $rb; log("L_ERR", "$rU is now in state $xml(body=>xpath:/dialog-info/dialog/state)\n"); XML in PUBLISH itself <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:88881@dev.company"> <dialog id="v6qmEYf5yI" direction="initiator"> <state>confirmed</state> </dialog> </dialog-info> Actual text in log is ... <script>: 88881 is now in state Means it's empty. xmlops module is loaded with no parameters. Tried also string $xml(body=>xpath:/dialog-info/dialog/state/text()) -> same result What am I missing here? kamailio 5.4.6 -- Thanks in advance, Igor

2 5

KEMI KSR.async Python3
by Ahmed Moubayed 10 Feb '22

10 Feb '22

Hi, I'm trying to use the async module from a python3 Kemi script but it conflicts with the keyword async. Any suggestions on how it can be used? Is there an alternative to KSR.async.route()? Thanks, Ahmed

1 0

CDR preserve original call direction
by Ahmed Fouad 10 Feb '22

10 Feb '22

Hi, I've enabled ACC and CDR logging and it's working fine for the logging but I noticed something wrong in the CDR table , the call source and destinations are depending on the BYE message not the initial invite dialog ACC table +-----+--------+--------------------------------------+---------------------+---------------+---------------------------+--------------+--------------+--------------------------------------+ | id | method | callid | time | src_ip | src_domain | src_user | dst_ouser | dst_domain | +-----+--------+--------------------------------------+---------------------+---------------+---------------------------+--------------+--------------+--------------------------------------+ | 216 | BYE | 81fa79a0-3deb-47b6-80ab-831a78a5d46e | 2022-02-09 06:57:51 | x.x.x.x | domain.com | DST_CLID | SRC_CLID | domain.com | | 215 | INVITE | 81fa79a0-3deb-47b6-80ab-831a78a5d46e | 2022-02-09 06:55:17 | x.x.x.x | domain.com | SRC_CLID | DST_CLID | dst_domain.com | The INVITE is the correct one with SRCIP x.x.x.x and domain.com but the BYE reversed the order since the the DST_CLID who sent the BYE so it's now logged as the source and the final CDR log looks like +--------+--------------+---------------------------+--------------+--------------------------------------+---------------------+---------------------+----------+-----+-------+--------+-------+---------+ | cdr_id | src_username | src_domain | dst_username | dst_domain | call_start_time | call_end_time +--------+--------------+---------------------------+--------------+--------------------------------------+---------------------+---------------------+----------+-----+-------+--------+-------+---------+ | 195 | DST_CLID | domain.com | SRC_CLID | domain.com | 2022-02-09 06:55:12 | 2022-02-09 06:57:51 | the CDR as shown is reversed regarding the source/dst username I tried to enable the direction ACC direction flag but didn't help and here is my current paramters modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) modparam("acc", "detect_direction", 0) modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "cdr_enable", 1) modparam("acc", "cdrs_table", "cdrs") Can you please advise how to configure ACC/CDR to log the CDR with the correct initial INVITE call flow regardless of the BYE direction ?

3 5

10 Feb '22

Hi there, I have a weird issue with kamailio (latest docker image kamailio-ci:5.5.2-alpine) and http_async_client. Before posting a lot of logs, let me describe what I want to achieve. I have a Kamailio and a SIP Phone. The SIP phone sends a REGISTER to kamailio, then in my routing block, I check if I have an Authorization header. Since I don't have an Authorization (first message), I use "www_challenge()". This replies to the SIP phone, and then the SIP phone sends a new REGISTER with the correct Authorization header. So far so good. Now, when I get the REGISTER with Authorization header, I want to ask an HTTP endpoint if this user is allowed to connect and check the password using http_async_query(). The problem is that when the transaction resumes, the tmx module is unhappy and throws this error : 30(36) CRITICAL: tmx [t_var.c:546]: pv_get_tm_reply_code(): no picked branch (-1) for a final response in MODE_ONFAILURE And a 500 error is sent back to the sip phone. The AUTH_REPLY route is still called and I can use the $http* values. Do you see something that I am doing wrong or missing in my logic? Is pausing/resuming to use the async http client is allowed if I'm handling a REGISTER transaction? Here's a simplified version of my routing block (not far from reality): ##### SNIP request_route{ route(AUTH); route[AUTH]{ if (is_method("REGISTER"){ if(no_auth_header){ www_challenge("$td","1"); exit; } else{ t_newtran(); http_async_query("http://xxx.xxx.xxx.xxx:9000/auth?foo=bar", "AUTH_REPLY"); } } } route[AUTH_REPLY]{ xlog("L_INFO", "route[HTTP_REPLY]: status $http_rs\n"); } } ##### END SNIP Best regards!

4 15

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users