sr-users

sr-users@lists.kamailio.org

40 participants
37513 discussions

help to configure topos module configuration
by Patrick Karton 18 Mar '22

18 Mar '22

Caller <--> (internal_IP) Kamailio (external_IP) <---> Callee I have this set up of kamailio with 2 interfaces. i use topos module for topology hiding and what i want to do is to send external_IP in Contact Header of request relayed to Callee and internal_IP in Contact Header of response relayed to Caller. i noticed that : when i use topos module with contact_mode to 0 all Record-Route and Caller Via Header are removed and thats great. but i dont find way to put 2 different ip addresses in Request and Response Contact Header? when i use contact_mode to 2 Record-Route and Caller Via Header are not anymore removed thats bad for topology hiding. And its seems we can not use $xavu(_tps_=>contact_host) parameter of module to put 2 different ip addresses in Request and Response Contact Header. What i want is : - remove all Record-Route and Caller Via Header for request like when contact_mode to 0 - and put 2 different ip addresses in Request and Response Contact Header is it possible to achieve it ? Thanks.

2 2

Upgrading from version 5.2 to 5.4 - any unpublished words of wisdom?
by Kevin Greene 18 Mar '22

18 Mar '22

Hi: I have a 5.2 version of Kamailio running and I was thinking to get it upgraded to the 5.4 branch. The 5.2 is working well but I have heard the 5.4 is a bit more stable. Thus the question becomes, is it worth the risk to upgrade and what should I look out for. Thanks. Kevin

2 1

Dialog module and DMQ
by Olle E. Johansson 18 Mar '22

18 Mar '22

Hi! The documentation on the DMQ support in the dialog module is a bit short, so I will ask here for clarifications: If I want to enable a rough limit on concurrent calls - will all servers share a $DLG_count ? Will get_profile_size() return the number of dialogs belonging to a profile on ALL servers? Thank you! /Olle

1 0

Kamailio as stateless failover proxy server and nat
by ppq＠tuta.io 17 Mar '22

17 Mar '22

Hello, I need some help in creating a stateless failover balancer for two asterisk servers using kamailio. I followed in the steps of an old project here: https://txlab.wordpress.com/tag/xlab1/ Kamailio is running in a multihomed host, with public ip facing the internet and private ip facing the asterisk servers. I have partial issues with nat traversal when the external device is also behind nat. All works when the device initates a call/dialog, however when the asterisk server tries to send an "OPTIONS" keep alive to the end device, Kamailio receives the packet from asterisk but tries to send it to the private IP address of the device instead of the public ip:port. Same goes for calls. My kamailio.cfg is below. I am missing something obvious here, but can't find it. Thanks === CUT==== #!KAMAILIO ################################################################ # # This is a front-end SIP proxy configuration for the xlab1 project # See for more details: https://txlab.wordpress.com/tag/xlab1/ # The configuration requires Kamailio version 3.3.x # # This work is licensed under a Creative Commons Attribution 3.0 License # Author: Stanislav Sinyagin <ssinaygin(a)k-open.com> # ################################################################ #!define WITH_DEBUG ####### Defined Values ######### #### define DBURL "text:///opt/sipfe/etc/kamailio_db" #!define DBURL "text:///etc/kamailio/kamailio_db" #!define BACKEND_NET4 10.10.10.0/24 #!define BACKEND_NET6 2a02:200:8:100::/64 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=2 log_stderror=yes #!else debug=1 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=2 auto_aliases=no #listen=udp:195.x.x.78:5060 # to avoid simple attacks, use unconventional port #port=5060 # this makes it listen on all ipv6 addresses auto_bind_ipv6=0 dns_try_ipv6=no # let kamailio choose the right source IP address mhomed=3 # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 ## Hardening sip_warning=0 server_signature=no user_agent_header="User-Agent: Kamailio Failover Balancer" ####### Modules Section ######## ## NOTE: ## mpath="/opt/sipfe/lib64/kamailio/modules_k/:/opt/sipfe/lib64/kamailio/modules/" loadmodule "db_text.so" loadmodule "jsonrpcs.so" #loadmodule "mi_fifo.so" loadmodule "tm.so" loadmodule "kex.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" #loadmodule "mi_rpc.so" loadmodule "path.so" loadmodule "domain.so" loadmodule "dispatcher.so" loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # ----------------- setting module-specific parameters --------------- #modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) modparam("nathelper", "received_avp", "$avp(RECEIVED)") modparam("nathelper", "nortpproxy_str", "a=sdpmangled:yes\r\n") modparam("path", "use_received", 1) modparam("domain", "db_url", DBURL) modparam("dispatcher", "db_url", DBURL) modparam("dispatcher", "table_name", "dispatcher") modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:22222") #modparam("rtpproxy", "rtpproxy_sock", "unix:/var/run/rtpproxy/rtpproxy.sock") #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) #!endif ####### Routing Logic ######## route { if (!sanity_check()) { exit; } if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); xlog("L_NOTICE", "$si $rm $ru -- too many hops\n"); exit; } if (af==INET) { force_rport(); if (src_ip != BACKEND_NET4) { # SIP request packet client->backend if( !loose_route() ) { if (!lookup_domain("$td", "dattr_")) { xlog("L_ERR", "$si $rm $ru -- domain \"$td\" is not " + "found in domain table\n"); drop(); } if (!defined $avp(dattr_routeset)) { xlog("L_ERR", "$si $rm $ru -- attribute \"routeset\" is " + "undefined for domain $td\n"); drop(); } if( !ds_select_dst(4000 + $avp(dattr_routeset), "1") ) { drop(); } } if (nat_uac_test("19")) { xlog("L_INFO", "Routing NAT in-dialog $rm from $fu to $du\n"); if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } } add_path_received(); #rtpproxy_manage("cwei"); rtpproxy_manage("cw"); record_route(); } else { # SIP request packet backend->client # Invites from backend contain Route field and it should be used # to reach the registered client loose_route(); #rtpproxy_manage("cwie"); rtpproxy_manage("cw"); record_route(); } } else { # IPv6: no NAT traversal, just pure routing if (src_ip != BACKEND_NET6) { # SIP request packet client->backend if( !loose_route() ) { if (!lookup_domain("$td", "dattr_")) { xlog("L_ERR", "$si $rm $ru -- domain \"$td\" is not " + "found in domain table\n"); drop(); } if (!defined $avp(dattr_routeset)) { xlog("L_ERR", "$si $rm $ru -- attribute \"routeset\" is " + "undefined for domain $td\n"); drop(); } if( !ds_select_dst(6000 + $avp(dattr_routeset), "1") ) { drop(); } } add_path_received(); record_route(); } else { # SIP request packet backend->client record_route(); } } forward(); } onreply_route { if (af==INET) { if(src_ip != BACKEND_NET4) { # SIP reply packet client->backend #rtpproxy_manage("cwie"); rtpproxy_manage("cw"); fix_nated_contact(); } else { # SIP reply packet backend->client #rtpproxy_manage("cwei"); rtpproxy_manage("cw"); } } return(1); } # Local Variables: # mode: sh # sh-indent-after-if: 0 # indent-tabs-mode: nil # tab-width: 4 # End: ====CUT=====

1 0

kamctl monitor : statistics not displayed ?
by Youssef Boujraf 17 Mar '22

17 Mar '22

Dear I am tying to monitor the kamailio with "kamctl monitor" and I got this error. -e [cycle #: 1; if constant make sure server lives] -e Kamailio Runtime Details: kamailio 5.5.4 (x86_64/linux) now: Wed Mar 16 12:44:43 2022 up_since: Wed Mar 16 12:39:51 2022 uptime: 292 -e Transaction Statistics: /usr/sbin/kamctl: 245: column: not found -e Stateless Server Statistics: /usr/sbin/kamctl: 259: column: not found -e UsrLoc Statistics: /usr/sbin/kamctl: 273: column: not found -e Core Statistics: /usr/sbin/kamctl: 287: column: not found -e Shared Memory Statistics: /usr/sbin/kamctl: 301: column: not foundAny idea Best Regards -- Youssef BOUJRAF

2 6

kamctl or kamcmd way to enable/disable sections of configs
by Joshua Young 17 Mar '22

17 Mar '22

#!define MYSECTION" route("1"); #!ifdef MYSECTION route("2"); #!endif I have declarations like this in my kamailio.cfg file, and was curious if there was a way to use kamctl or kamcmd to enable or disable the defined value in a live system. Or if there is another approach/mechanism I'm unaware of the "Serial Forking Based on Q Value" stuff and use it in other parts, but I am looking for a general way to manually manipulate routing on live system using cli commands if possible... Thanks, Joshua

3 2

Kamailio in docker container with TLS enabled using Let's Encrypt
by Giovanni Tommasini 17 Mar '22

17 Mar '22

Hi guys, starting from Fred article https://www.fredposner.com/1836/kamailio-tls-and-letsencrypt/ we move step forward creating this small PoC to deploy Kamailio in docker container with TLS enabled using Let's Encrypt https://github.com/evoseed/kamailio-tls-letsencrypt What do you think? Any feedback? Any mistakes to correct or improvements to make? Thanks a lot Have a good evening Giovanni Tommasini *evoseed s.r.l.* phone: +39 340 11 28 800 mail: giovanni.tommasini(a)evoseed.io site: evoseed.io address: Via Lucrezio 13, Trieste Italy

2 2

sanity from uri check
by Juha Heinanen 16 Mar '22

16 Mar '22

I have in config: modparam("sanity", "uri_checks", 3) /* RURI, From */ and then config call sanity_check() on incoming requests: if (!sanity_check()) { xnotice("Request from <$var(src_ip)> has invalid syntax\n"); exit; }; When incoming request has: From: sipp <sip:@192.168.255.95:5062>;tag=1 no notice is printed to syslog. >From RFC 3261: SIP-URI = "sip:" [ userinfo ] hostport uri-parameters [ headers ] userinfo = ( user / telephone-subscriber ) [ ":" password ] "@" user = 1*( unreserved / escaped / user-unreserved ) My understanding of that is that there needs to be at least one character before @ sign. -- Juha

2 29

properly removing First Via header received
by Patrick Karton 16 Mar '22

16 Mar '22

i want to remove the First Via Header received from uac to kamailio. so in my script i use remove_hf("Via") but in the relayed request i see that ";received=x.x.x.x;rport=xxxx" is left without any header before it. i think internally kamailio adds a lump before i call the remove_hf function. how to do it properly ? Thanks

2 2

Forking for scripts?
by Matthias Urlichs 16 Mar '22

16 Mar '22

Hello, Is it possible to run a background Python script within Kamailio? I.e. call "fork_process" and then a non-terminating "python_exec()" from the child? -- -- regards -- -- Matthias Urlichs

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users