sr-users

sr-users@lists.kamailio.org

37388 discussions

get defined names in kemi script
by Riccardo Villa 16 Jul '21

16 Jul '21

Hello guys, do you know if it’s possible for a kemi script to know if a name is defined (with #!define) in kamailio.cfg? It would be useful to modify kemi script logic depending on feature/module presence. Thanks in advance for your help. Regards, Riccardo -- -- NOTICE: This electronic mail transmission may contain confidential information and is intended only for the person(s) named. Any use, copying, or disclosure by any other person is strictly prohibited. If you have received this transmission in error, please notify the sender via e-mail.

3 6

rtpengine play_media
by Дмитрий Плаксюк 15 Jul '21

15 Jul '21

Greetings. I'm trying to set up annoncement playback for both parts of the call. I have to play the file after the connection is established. Stop_media (all) must be executed before playing It turns out the construction: .... block_media ("all"); play_media ("all file = / etc / kamailio / sounds / mg1.wav"); Can't find a way to do unblock_media ("all"); after the file has finished playing. There are no sip messages in this process. The call has already been established.

1 0

DMQ node list
by Aidar Kamalov 14 Jul '21

14 Jul '21

Hello, I have a kamailio cluster with two nodes kamailio-1.local: 10.101.2.119 kamailio-2.local: 10.101.2.247 with dmq configs: kamailio-1: modparam("dmq", "server_address", "sip:MY_IP4_ADDR:5060") modparam("dmq", "notification_address", "kamailio-2.local:5060") kamailio-2: modparam("dmq", "server_address", "sip:MY_IP4_ADDR:5060") modparam("dmq", "notification_address", "kamailio-1.local:5060") All works fine, but kamcmd dmq.list_nodes on kamailio-1.local show me: { host: 10.101.2.247 port: 5060 resolved_ip: 10.101.2.247 status: active last_notification: 0 local: 0 } { host: kamailio-1.local port: 5060 resolved_ip: 10.101.2.119 status: active last_notification: 0 local: 0 } { host: kamailio-2.local port: 5060 resolved_ip: 10.101.2.247 status: active last_notification: 0 local: 0 } { host: 10.101.2.119 port: 5060 resolved_ip: 10.101.2.119 status: active last_notification: 0 local: 1 } and kamailio-2.local show me: { host: kamailio-2.local port: 5060 resolved_ip: 10.101.2.247 status: active last_notification: 0 local: 0 } { host: 10.101.2.119 port: 5060 resolved_ip: 10.101.2.119 status: active last_notification: 0 local: 0 } { host: kamailio-1.local port: 5060 resolved_ip: 10.101.2.119 status: active last_notification: 0 local: 0 } { host: 10.101.2.247 port: 5060 resolved_ip: 10.101.2.247 status: active last_notification: 0 local: 1 } So there are only two hosts in the cluster, but there are 4 records in dmq.list_nodes. Also in sip trace I can see that kamailio send DMQ messages to itself too (because it ip marked as local: 0 I think). Is it ok? Is it normal behavior? What should I do to fix it? Should multi_notify and DNS name with 2 A records fix it (and why?)? -- Aydar A. Kamalov

2 1

Re: [SR-Users] Subscriber Management using JSONRPC over HTTP
by Surabhi Garg 14 Jul '21

14 Jul '21

Hi Alex, By subscriber management I mean, auth_db module which actually works on subscriber table to add or alter sip account for authentications. Auth_db Module (kamailio.org)<https://kamailio.org/docs/modules/4.4.x/modules/auth_db.html#auth_db.f.auth…> So, similar like usrloc module which you mentioned having JSONRPC commands to alter Location table. I am looking for JSONRPC Command for subscriber module as well. As far as my understanding, currently there is no JSONRPC command available for subscriber table. So, if this is currently a known not offered feature / limitation shall we raise it as feature request if others also agree to its usefulness. What I'm seeking is more of an acknowledgment that this feature doesn't exist & have it's benefit. As I can see other community members either ends up directly interacting with DB for subscriber table provisioning. Maybe I can contribute on this too. Surabhi Garg Mobile - 91 783 888 7523 | Skype - surabhi.garg9 ________________________________ From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Alex Balashov <abalashov(a)evaristesys.com> Sent: 09 July 2021 01:27 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Subject: Re: [SR-Users] Subscriber Management using JSONRPC over HTTP I am not 100% sure what you mean by subscriber management, but if you mean what I think you mean, these might be the droids you’re looking for: https://kamailio.org/docs/modules/5.5.x/modules/usrloc.html#idm771 — Sent from mobile, with due apologies for brevity and errors. On Jul 8, 2021, at 3:55 PM, Surabhi Garg <surabhi.garg(a)outlook.com> wrote: Hi Team, Greetings! I was trying to use HTTP to do the subscriber management (CRUD operations) & for that I am using JSONRPC-S module (JSONRPC over HTTP). But like other modules e.g. dispatcher, location I am unable to find any RPC commands for doing subscriber management (checked in auth_db) module. So is there a way to achieve subscriber management using JSONRPC over HTTP. Few HTTP examples which I am using for dispatcher module are given below. Similar commands I am looking for subscriber management as well. curl http://localhost:8081/RPC -H "Content-Type: application/json" -d " {\"jsonrpc\":\"2.0\",\"method\":\"dispatcher.add\", \"params\":[2, \"sip:127.0.0.1:5061\"], \"id\": \"1\"}" curl http://localhost:8081/RPC -H "Content-Type: application/json" -d " {\"jsonrpc\":\"2.0\",\"method\":\"dispatcher.remove\”, \"params\":[2, \"sip:127.0.0.1:5061\"], \"id\": \"1\"}" Surabhi Garg Mobile - 91 783 888 7523 __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * sr-users(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

2 2

DMQ_USRLOC module and calls
by Social Boh 13 Jul '21

13 Jul '21

Hello, I'm testing DMQ_USRLOC modulo between two Kamailio servers (A) and (B) The two servers share the same domain and using Amazon Route53 to distributes 50% requests each Server. The problem is when I try to make a call from user A (registered on kamailio A) and the user B (registered on Kamailio B). The call follow this flow: User A --> KamailioA --> UserB go directly to userB because KamailioA know, via DMQ_USRLOC IP and port of UserB. With some Softphone the call work with audio without problem; with other Softphone USERB never answer the INVITE sends from Kamailio. Is it possible use this flow? USER A --> KamailioA --> KamailioB --> User B to resolve this kind of problem or is there other available option? Thank you -- --- I'm SoCIaL, MayBe

5 15

Change routing for Register
by H Yavari 13 Jul '21

13 Jul '21

Hi to all, In a scenario, we need to change the destination of users' registration requests when they send the first 'Register' to Kamailio-A and it replies 401 to the user, next time the user sends 'Register' to Kamailio-B. User------Register-------> Kamailio-A User<-----401--------------Kamailio-A User-------Register--------> Kamailio-B RFC says we can't use the Record-Route for register because it doesn't create a dialog.Is there any option, header that Kamailio-A puts in the 401, and after that users send register to the Kamailio-B? Thank you.BR,Hossein

3 3

Kamailio v5.4.6 Released
by Daniel-Constantin Mierla 13 Jul '21

13 Jul '21

Hello, Kamailio SIP Server v5.4.6 stable release is out. This is a maintenance release of the latest stable branch, 5.4, that includes fixes since the release of v5.4.5. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.4.x. Deployments running previous v5.4.x versions are strongly recommended to be upgraded to v5.4.6. Note that 5.4 is the second last stable branch, still officially maintained by Kamailio development team. The latest stable branch is 5.5, with v5.5.0 being release out of it. For more details about version 5.4.6 (including links and guidelines to download the tarball or from GIT repository), visit: * https://www.kamailio.org/w/2021/06/kamailio-v5-4-6-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online - June 7-10, 2021 (America Timezone) * https://www.asipto.com/sw/kamailio-advanced-training-online/

3 2

Using the dialog module. dialog was not destroyed with BYE message
by woenho＠gmail.com 08 Jul '21

08 Jul '21

According to the documentation a dialog is automatically destroyed when a BYE is received. But, dialog was not destroyed. What can I do? I am testing with kamailio 5.5 version

3 2

Subscriber Management using JSONRPC over HTTP
by Surabhi Garg 08 Jul '21

08 Jul '21

Hi Team, Greetings! I was trying to use HTTP to do the subscriber management (CRUD operations) & for that I am using JSONRPC-S module (JSONRPC over HTTP). But like other modules e.g. dispatcher, location I am unable to find any RPC commands for doing subscriber management (checked in auth_db) module. So is there a way to achieve subscriber management using JSONRPC over HTTP. Few HTTP examples which I am using for dispatcher module are given below. Similar commands I am looking for subscriber management as well. curl http://localhost:8081/RPC -H "Content-Type: application/json" -d " {\"jsonrpc\":\"2.0\",\"method\":\"dispatcher.add\", \"params\":[2, \"sip:127.0.0.1:5061\"], \"id\": \"1\"}" curl http://localhost:8081/RPC -H "Content-Type: application/json" -d " {\"jsonrpc\":\"2.0\",\"method\":\"dispatcher.remove\”, \"params\":[2, \"sip:127.0.0.1:5061\"], \"id\": \"1\"}" Surabhi Garg Mobile - 91 783 888 7523

2 1

How to check If Alias is already Set in Contact Header
by Juha Heinanen 08 Jul '21

08 Jul '21

Transformations (e.g. nameaddr.uri and uri.param.name) on $ct are your friends. -- Juha

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users