sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

[Serusers] PA module segfault
by TERRY ROBERT 05 Jan '07

05 Jan '07

Hi, I'm getting a segfault error while running the latest presence server snapshot (ser-0.10.99-dev35-pa-4.2). The scenario is: UA SER SUBSCRIBE ----------> 200 <---------- NOTIFY <---------- 200 ----------> Everything is fine until the subscription expires, at which point the PA module segfaults and generates a core file. Any suggestions on this? (logfile and backtrace from gdb are attached).

2 1

Re: [Users] LCR db_only mode problem
by Jayesh Nambiar 05 Jan '07

05 Jan '07

Hi Juha, Thanks for your reply. First prominent doubt that I have is; when I am using LCR in db_only mode why does openser try to load the table while starting up? The scenario is as follows: I had 50 rows in LCR table and started openser and it started properly and also routed the calls properly according to the values in lcr and gw table. Now I just appended more 40,000 rows to this table and again the routing worked properly as per my lcr table. This behaviour was correct as I was using query only mode. I did not need any restart or any fifo reload command. Only when I restarted my openser, the openser again died as it was trying load the lcr table while starting. Could this be a bug in lcr module as I am not sure whats happening. I tried increasing MAX_NO_OF_LCRS but even that did not help. Somebody please help if poosible. Thanks, w/regards, jayesh ----- Original Message ---- From: Juha Heinanen <jh(a)tutpro.com> To: Jayesh Nambiar <voip_freak(a)yahoo.co.in> Cc: openser <users(a)openser.org> Sent: Tuesday, 26 December, 2006 10:58:01 PM Subject: [Users] LCR db_only mode problem X-VM-v5-Data: ([nil nil nil nil nil nil nil nil nil] the error messages you get are coming from this statement: if (lcr_dbf.query(dbh, NULL, 0, NULL, lcr_cols, 0, 4, 0, &res) < 0) { LOG(L_ERR, "lcr_reload_gws(): Failed to query lcr data\n"); lcr_dbf.close(dbh); return -1; } i don't know which kind of memory db queries reserve. if shared memory, you can start openser with larger -m parameter value. if pkg memory, you need to edit PKG_MEM_POOL_SIZE in config.h and recompile openser. with lots of lcr entries and no caching, performance may be bad. if you use caching then you need to increase value of #define MAX_NO_OF_LCRS 256 in lcr_mod.c and recompile lcr module. increasing MAX_NO_OF_LCRS means that more shared memory will be used so you may also need to start openser with larger -m parameter value. -- juha Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php

3 3

[Serusers] Aastra 9133i
by Bill 04 Jan '07

04 Jan '07

Does anyone have a config for an Aastra 9133i IP phone to a SER box? I am trying to configure one. I can make calls to the Aastra but can't make calls from the Aastra. It registers properly. Thanks Bill

1 0

[Users] new CDRTool release 5.0.5
by Adrian Georgescu 04 Jan '07

04 Jan '07

Hello, I have been asked many times where is the best place to obtain support and ask questions for CDRTool. As CDTool is at this moment primarily designed and tested for OpenSER deployments I have decided that OpenSER users mailing is the best place to make announcements for new releases. There is of course no guaranteed support, as you may expect for a free product, support requests will however not go unheard. Unless there is no objection or complaint, I will keep this mailing list updated about CDRTool new releases from now on. Here it is: CDRTool 5.0.5 has been released. The software can be downloaded from: http://download.dns-hosting.info/CDRTool/ Changelog: * Fixed determination of previous year in update_raddact_record_mediaproxy Consolidate SET statements to minimize binary log entries. Fixed bug in update_raddact_record_mediaproxy, the record values were reset after execution of update on the first table causing failure to update the previous table. setup/radius/OpenSER/radius_accounting.proc must be reloaded into the MySQL server: mysql -u root -p -h sipdb radius < setup/radius/OpenSER/ radius_accounting.proc * Use same CDR structure for MaxSessionTime and DebitBalance * Change logging for prepaid actions to fit one line * Normalize tries previous month if no record has been updated * Mention how to see prepaid account status * Updated rating docs * Moved E164 class to phplib/local.inc * Show accounts with quota that exceeded a certain treshold scripts/SER/quotaShowAccounts.php treshhold * Added documentation for the Quota system (doc/QuotaSystem.txt) * Use normalization lock per table using GET_LOCK() server function http://dev.mysql.com/doc/refman/5.0/en/miscellaneous-functions.html This provided faster web response when multiple clients access the interface * Fixed confirmation for delete operations in rating tables when global vars are turned off in php.ini Regards, Adrian

2 1

[Users] Strange OK Message after Register
by Martin Klisch 04 Jan '07

04 Jan '07

Hi, yesterday i've began to upgrade openser from 1.0.1 to 1.1.0. Now i got a strange situation when registering with two different clients with the same sip account. in the OK Message from the sip proxy i have a strange contact field: Contact: <sip:012345@xxx:5070>;q=0.9;expires=3600, <sip:012345@xxxx:63036>;expires=25 i think in the OK Message should only be one contact adress?

2 1

[Users] Forward to the "To" field
by Thomas Deillon 04 Jan '07

04 Jan '07

Hi all, Merry Xmas ! I'm just a small question if some people are still working :-) I try to make a load balancing solution with SER and Asterisk. I use the dispatcher module and I set on asterisks servers the default gw as SER. All requests go through the SER to the asterisks and on the SER I'm have a line like If source-ip = Asterisk source IP do ... And I want to do something like forward to the TO FIELD ... Do you know how can I do this ? Thanks a lot for your help, Thomas

3 2

[Users] Secure SIP messages
by Steffen Witt 04 Jan '07

04 Jan '07

Hello, I have a few questions about how to secure SIP messages... IPSec or TLS can be used to guarantee privacy, integrity and authenticity of transmitted data. But SIP is only payload/data for these protocols. Digest Authentication does only guarantee authenticity... S/MIME seems to be interesting but I don't know any implementation in a SIP client. My questions: - Is there any mechanism that prevents me from corrupting or faking SIP messages? - Is it possible to create a kind of binding between the certificates used for TLS/IPSec and the SIP accounts? Thanks for your answers... Best regards, Steffen

2 3

[Serusers] HELP!!! Table acc is full
by Nhadie Ramos 04 Jan '07

04 Jan '07

Hi All, How can i solve this problem? is this a mysql problem? anyone has encountered this error before? Regards, Ronald

1 0

[Users] European and Australian based SIP termination providers
by T.R. Missner 04 Jan '07

04 Jan '07

Hello, Does anyone have recommendations for a SIP based termination provider in Europe and/or Australia? I am looking specifically for a wholesale, carrier grade provider. I have found several which appear to be asterisk based and quite small. What I am looking for is more of a traditional carrier that is SIP enabled as opposed to a smallish mom and pop shop. Thanks in advance. T.R.

3 2

[Serusers] Ser, MediaProxy and Asterisk
by Gerardo Amaya 04 Jan '07

04 Jan '07

Hello all, I'm trying to use a SER server for the following: | | | | ISP #1 ISP #2 Private Link Private LINK NATed SIP SIP Clients 172.18.xxx.yyy 172.16.5.xx Clients | | | | | | | | | | | ---------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------- SER with MEDIAPROXY ---------------------------------------------------------------- | | | ================ Asterisk (172.16.5.1) ================= | | PSTN I need asterisk to handle all the calls to the PSTN and event the SIP calls between them. I need to use the SER server as a tool to receive calls from any of the environments that I draw on top, and all communicating with Asterisk, even I also have a backup Asterisk box, that I can use in load balance with SER. I saw that there is a function "rewritehostport()" which I'm pretty sure it won't work since I will not keep the call in the SER server. I have made the NAT configuration of the Getting Started Guide, but I now that this is just part of what I need to build the complete solution. Can anyone please give me a hint in what is that I need to acomplish such task Thanks in advance Gerardo Amaya

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users