sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Segmentation fault on debian 10
by Bugaian A. Vitalie 03 Mar '21

03 Mar '21

Hello, fresh install on debian 10: Mar 3 11:42:16 teams01 kernel: [ 5771.292626] kamailio[1518]: segfault at 0 ip 00007f102bb5c206 sp 00007ffec00096e8 error 4 in libc-2.28.so [7f102bae6000+148000] Mar 3 11:42:16 teams01 kernel: [ 5771.292677] Code: 0f 1f 40 00 66 0f ef c0 66 0f ef c9 66 0f ef d2 66 0f ef db 48 89 f8 48 89 f9 48 81 e1 ff 0f 00 00 48 81 f9 cf 0f 00 00 77 6a <f3> 0f 6f 20 66 0f 74 e0 66 0f d7 d4 85 d2 74 04 0f bc c2 c3 48 83 Any things to try? Thanks. Vitalie.

3 2

topos event_route question
by Juha Heinanen 03 Mar '21

03 Mar '21

I tried to skip topos stripping based on R-URI hostpart like this: event_route[topos:msg-outgoing] { xinfo("******** at topos:msg-outgoing with $rd\n"); if ($rd == "example.com") drop; } and got this to syslog: Mar 2 18:35:59 lab /usr/bin/sip-proxy[22441]: INFO: <script>: ******** at topos:msg-outgoing with kamailio.org Where does $rd == kamailio.org come from, since R-URI hostpart of the request does not have that domain? Or is it so that $rd cannot be used in that event route? -- Juha

2 5

TOPOS (5.5) answers '404 Not Here' when b side send BYE
by 张阳 03 Mar '21

03 Mar '21

Dear Daniel: When I was using the topos module, I found that if a bye message was sent from side B, kamailio would return a 404 message. When I remove the topos module, the call is normal, attached is sip pcap. 172.18.67.50:5060 and 172.18.67.40:55066 Are different ports monitored by the same kamailio Looking forward to your reply! My cfg is too long,I will key information for cfg: modparam("ndb_redis", "server", "name=srv8;addr=127.0.0.1;port=6381;db=2") modparam("topos", "storage", "redis") modparam("topos", "db_url", "redis://127.0.0.1:6381/2") modparam("topos_redis", "serverid", "srv8") modparam("topos", "rr_update", 1) /*……*/ request_route { xlog("L_DBG","request_route message: $mb\n"); if (is_method("UPDATE")) { t_on_reply("UPDATE_SELF"); #t_on_branch("UPDATE_OUT"); } # per request initial checks route(REQINIT); #!ifdef PBX_OUTMODE route(MESSAGE); #!endif # handle requests within SIP dialogs route(WITHINDLG); route(CANCEL); # route(CHECK_REG); route(REGISTER); if (is_method("OPTIONS")) { route(REPLAY_OPTIONS); exit; } t_check_trans(); # /andle methods that don't make any sense in this environment if (!is_method("INVITE")) { xlog("L_INFO","Call $ci: Anomalous method $rm received from $si:$sp, relaying just in case\n"); sl_reply_error(); exit; } if(is_method("INVITE")){ dlgs_init("$fu","$tu","FusionSBC"); dlg_manage(); } if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } #From now on only INVITES #check if it's registered PBX user #!ifdef ASBCBROKER route(INVITE_PBX); #!else #!ifdef ASBC route(INVITE_PBX); #!endif #!endif route(INVITE_AUTHENTICATE); route(GET_RG_INFO); route(GET_NUMBERS); route(SHOW_CALL_INFO); #Manipulate IN ANI (Number and NOA) route(ANI_MANIPULATION); #Manipulate IN DNIS route(DNIS_MANIPULATION); route(SDP); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers xlog("L_DEBUG","Adding Record-Route header\n"); # NVF changed this 4/22/2014 - why remove the incoming route headers? #remove_hf("Record-Route"); record_route(); route(ROUTING); route(SEND); } /*……*/ route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing xlog("L_INFO","yang yangyang testin to not here"); if (loose_route()){ if(is_method("INFO")){ route("INFO_SELF"); } route(BYE); route(REINVITE); route(ACK); route(RELAY); } else { if ( is_method("ACK")) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 $var(obj) = $sht(call_objects=>$ci); xlog("L_INFO","Call $ci: ACK received in A-Leg, $fU@$si:$sp -----> $rU@$Ri:$Rp relaying downstreamrouteWITHINDLG\n"); t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } xlog("L_INFO","yang in to not here"); sl_send_reply("404","Not here"); } exit; } } 发送自 Windows 10 版邮件<https://go.microsoft.com/fwlink/?LinkId=550986>应用

1 0

Hunt groups with alias_db_lookup
by Adam McCarthy 02 Mar '21

02 Mar '21

Hello, I'm currently using alias_db_lookup to map inbound calls from my SIP carrier to internal endpoints e.g., 1NXXXXXXXXX(a)sip.example.com -> alice(a)sip.example.com. This works well, but I would now like to simultaneously call alice@ and bob@, e.g. alias_db_lookup(...) # somehow return alice@ and bob@ append_branch("sip:bob@sip.example.com") as described here: http://kamailio.org/docs/modules/devel/modules/tm.html#tm.serial_forking This is effectively a hunt group, where two users are called and once one user picks up the call, the second is sent a CANCEL. How would I acheive this with Kamailio? Thanks, Adam

3 3

Load htable from MongoDB
by Sergiu Pojoga 02 Mar '21

02 Mar '21

Hi there, Question: is it possible to load a htable, defined by columns, from a MongoDB collection, when a certain "column" is an object with multiple elements? For example: modparam("htable", "htable", "users=>size=10;dbtable=users;cols='FirstName,LastName,Location:Prefix';") Fails when trying to load the value of Location.Prefix { "FirstName": "John", "LastName": "Doe", "Language" : "en", "Location" : { "Country" : "USA", "City" : "New York", "Prefix" : "+1" } } Thanks in advance.

2 2

Need help in transforming an SDP string through a re.subst
by Denys Pozniak 02 Mar '21

02 Mar '21

Hello! There is a task to remove a fragment (*a=rtpmap:8 PCMA/8000#015#012*) from the SDP string generated by the rtpengine. *v=0#015#012o=kw 1614043485 1614043486 IN IP4 185.19.237.77#015#012s=kw#015#012c=IN IP4 1.1.1.1#015#012t=0 0#015#012m=audio 31828 RTP/AVP 0 8 101#015#012a=silenceSupp:off - - - -#015#012a=direction:both#015#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:8 PCMA/8000#015#012a=rtpmap:101 telephone-event/8000#015#012a=fmtp:101 0-16#015#012a=sendrecv#015#012a=rtcp:31829#015#012a=ptime:20#015#012* The most logical option seems to be using the re.subst transformation, but so far no success. $avp(write_sdp_pv) = $(avp(write_sdp_pv){re.subst,/a=rtpmap:8 PCMA\/8000%23015%23012//s}); Сan there be an alternative or am I doing something wrong with the re.subst? -- BR, Denys Pozniak

3 3

Re: [SR-Users] [sr-dev] RTPEngine - No support for kernel packet forwarding available
by Henning Westerholt 02 Mar '21

02 Mar '21

(changing list to sr-users) Hello, Do you see an iptables rule belonging to the rtpengine module? If you do a test call, are the packet counters increased on this iptables rule? In the log message I see another error related to SRTP, not anything related to the kernel forwarding mode. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-dev <sr-dev-bounces(a)lists.kamailio.org> On Behalf Of Suresh Talasaniya Sent: Monday, March 1, 2021 11:03 AM To: sr-dev(a)lists.kamailio.org Subject: [sr-dev] RTPEngine - No support for kernel packet forwarding available Hello folks, RTPEngine - No support for kernel packet forwarding available, please find the below information/logs. Mar 1 01:46:45 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [control] Received command 'offer' from 127.0.0.1:52657<http://127.0.0.1:52657> Mar 1 01:46:45 sp201 rtpengine[14973]: NOTICE: [9ca2e714-95d0-9662-82e9-e89659024d66]: [core] Creating new call Mar 1 01:46:45 sp201 rtpengine[14973]: ERR: [9ca2e714-95d0-9662-82e9-e89659024d66]: [crypto] Failed to init DTLS connection: srtp unknown protection profile Mar 1 01:46:45 sp201 rtpengine[14973]: ERR: [9ca2e714-95d0-9662-82e9-e89659024d66]: [crypto] Failed to init DTLS connection: srtp unknown protection profile Mar 1 01:46:45 sp201 rtpengine[14973]: ERR: [9ca2e714-95d0-9662-82e9-e89659024d66]: [crypto] Failed to init DTLS connection: srtp unknown protection profile Mar 1 01:46:45 sp201 rtpengine[14973]: ERR: [9ca2e714-95d0-9662-82e9-e89659024d66]: [crypto] Failed to init DTLS connection: srtp unknown protection profile Mar 1 01:46:45 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [control] Replying to 'offer' from 127.0.0.1:52657<http://127.0.0.1:52657> (elapsed time 0.001429 sec) Mar 1 01:48:47 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [control] Received command 'delete' from 127.0.0.1:52865<http://127.0.0.1:52865> Mar 1 01:48:47 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [core] Scheduling deletion of call branch 'tW4HuJe5Hmnkd9RLpKSG' (via-branch 'z9hG4bKgRZGOZSlWGzaiX8oM6vpqSqzpiG6Tqvf0') in 30 seconds Mar 1 01:48:47 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [control] Replying to 'delete' from 127.0.0.1:52865<http://127.0.0.1:52865> (elapsed time 0.000124 sec) Mar 1 01:48:47 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [control] Received command 'delete' from 127.0.0.1:52865<http://127.0.0.1:52865> Mar 1 01:48:47 sp201 rtpengine[14973]: INFO: [9ca2e714-95d0-9662-82e9-e89659024d66]: [core] Scheduling deletion of call branch 'tW4HuJe5Hmnkd9RLpKSG' (via-branch '') in 30 seconds [root@sp201 src]# lsmod | grep xt_RTPENGINE xt_RTPENGINE 45829 5 [root@sp201 src]# lsmod Module Size Used by iptable_nat 12875 0 nf_nat_ipv4 14115 1 iptable_nat nf_nat 26583 1 nf_nat_ipv4 iptable_mangle 12695 0 camellia_aesni_avx_x86_64 27590 0 camellia_x86_64 52986 1 camellia_aesni_avx_x86_64 xts 12914 1 camellia_x86_64 nfnetlink_queue 18197 0 nfnetlink_log 17892 0 nfnetlink 14519 2 nfnetlink_log,nfnetlink_queue bluetooth 548730 0 rfkill 22391 1 bluetooth ipt_REJECT 12541 2 nf_reject_ipv4 13373 1 ipt_REJECT nf_conntrack_ipv4 15053 6 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_RTPENGINE 45829 5 netconsole 14587 0 xt_conntrack 12760 5 nf_conntrack 139264 4 nf_nat,nf_nat_ipv4,xt_conntrack,nf_conntrack_ipv4 iptable_filter 12810 1 edac_mce_amd 31603 0 crc32_pclmul 13133 0 ghash_clmulni_intel 13273 0 aesni_intel 189456 0 lrw 13286 3 camellia_x86_64,aesni_intel,camellia_aesni_avx_x86_64 gf128mul 15139 2 lrw,xts glue_helper 13990 3 camellia_x86_64,aesni_intel,camellia_aesni_avx_x86_64 ppdev 17671 0 ablk_helper 13597 2 aesni_intel,camellia_aesni_avx_x86_64 cryptd 21190 3 ghash_clmulni_intel,aesni_intel,ablk_helper parport_pc 28205 0 virtio_rng 13029 0 joydev 17389 0 virtio_balloon 18015 0 parport 46395 2 ppdev,parport_pc i2c_piix4 22401 0 pcspkr 12718 0 ip_tables 27126 3 iptable_filter,iptable_mangle,iptable_nat xfs 997727 2 libcrc32c 12644 3 xfs,nf_nat,nf_conntrack ata_generic 12923 0 pata_acpi 13053 0 virtio_net 28085 0 virtio_blk 18472 4 virtio_console 28076 0 net_failover 18147 1 virtio_net failover 13374 1 net_failover ata_piix 35052 0 libata 243094 3 pata_acpi,ata_generic,ata_piix crct10dif_pclmul 14307 0 crct10dif_common 12595 1 crct10dif_pclmul crc32c_intel 22094 1 virtio_pci 22985 0 floppy 69432 0 virtio_ring 22991 6 virtio_blk,virtio_net,virtio_pci,virtio_rng,virtio_balloon,virtio_console serio_raw 13434 0 virtio 14959 6 virtio_blk,virtio_net,virtio_pci,virtio_rng,virtio_balloon,virtio_console [root@sp201 src]# kamailio -V version: kamailio 5.5.0-dev4 (x86_64/linux) fd8d0f flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: fd8d0f compiled on 03:59:17 Feb 16 2021 with gcc 4.8.5 Install the packages required to compile RTPEngine yum -y install epel-release yum -y install glib glib-devel gcc zlib zlib-devel openssl openssl-devel pcre pcre-devel libcurl libcurl-devel xmlrpc-c xmlrpc-c-devel yum -y install libevent-devel glib2-devel json-c-devel json-glib json-glib-devel gperf libpcap-devel git perl-IPC-Cmd libiptcdata-devel libiptcdata-devel hiredis hiredis-devel redis iptables-devel libwebsockets-devel yum -y install spandsp spandsp-devel rpm --import http://li.nux.ro/download/nux/RPM-GPG-KEY-nux.ro yum -y install http://li.nux.ro/download/nux/dextop/el7/x86_64/nux-dextop-release-0-5.el7.… yum repolist yum -y install ffmpeg ffmpeg-devel yum -y install bcg729 bcg729-devel wget https://download1.rpmfusion.org/free/el/rpmfusion-free-release-7.noarch.rpm rpm -i rpmfusion-free-release-7.noarch.rpm Get RTPEngine source from GitHub repository: cd /usr/src git clone https://github.com/sipwise/rtpengine.git rtpengine cd rtpengine Compile and install the daemon cd /usr/src/rtpengine/daemon/ make cp -fr rtpengine /usr/sbin/rtpengine cp -fr rtpengine /usr/local/bin/rtpengine Compile and install iptables extension cd /usr/src/rtpengine/iptables-extension make all cp -fr libxt_RTPENGINE.so /usr/lib64/xtables/. Compile and install the kernel module xt_RTPENGINE cd /usr/src/rtpengine/kernel-module make cp -fr xt_RTPENGINE.ko /lib/modules/`uname -r`/extra/xt_RTPENGINE.ko depmod -a modprobe -v xt_RTPENGINE Check if the kernel module loaded properly: lsmod | grep xt_RTPENGINE Make to load the module at the boot time: echo "# load xt_RTPENGINE module" >> /etc/modules-load.d/rtpengine.conf echo "xt_RTPENGINE" >> /etc/modules-load.d/rtpengine.conf Check if RTPEngine is accessible: ls -l /proc/rtpengine/control | grep root Should see: –w–w—-. 1 root root 0 Oct 16 10:32 /proc/rtpengine/control ls -l /proc/rtpengine/list -r–r–r–. 1 root root 0 Oct 16 10:32 /proc/rtpengine/list Install configuration file Get your external IP (with ‘ip addr’ for example) In the following command change 111.111.111.111 to your external IP echo "OPTIONS=\"-i 111.111.111.111 -n 127.0.0.1:2223<http://127.0.0.1:2223> -m 10000 -M 60000 -L 4 --log-facility=local1 --table=8 --delete-delay=0 --timeout=60 --silent-timeout=600 --final-timeout=7200 –offer-timeout=60 --num-threads=12 --tos=184 –no-fallback\"" > /etc/sysconfig/rtpengine Configure RTPEngine log echo "local1.* -/var/log/rtpengine/rtpengine.log;clean_template" >> /etc/rsyslog.conf mkdir -p /var/log/rtpengine touch /var/log/rtpengine/rtpengine.log Configure logrotate echo "/var/log/rtpengine/rtpengine.log { daily rotate 4 missingok dateext copytruncate compress }" > /etc/logrotate.d/rtpengine Disable logging to /var/log/messages perl -pi.bak -e 's#(\s+)\/var\/log\/messages#;local1.none$1/var/log/messages#' /etc/rsyslog.conf systemctl restart rsyslog Configure RTPEngine service echo "[Unit] Description=Kernel based rtp proxy After=syslog.target After=network-online.target After=iptables.service Requires=network-online.target [Service] Type=forking PIDFile=/var/run/rtpengine.pid EnvironmentFile=-/etc/sysconfig/rtpengine ExecStart=/usr/local/bin/rtpengine -p /var/run/rtpengine.pid \$OPTIONS Restart=on-abort [Install] WantedBy=multi-user.target" > /etc/systemd/system/rtpengine.service Enable and start RTPEengine systemctl enable rtpengine.service mkdir -p /var/spool/rtpengine systemctl start rtpengine Check status systemctl status rtpengine.service Check if g729 installed properly rtpengine --codecs | grep "G729" vim /etc/sysconfig/rtpengine OPTIONS="-i publicIP -n 127.0.0.1:2223<http://127.0.0.1:2223> -m 10000 -M 20000 -L 4 --log-facility=local0 --table=8 --delete-delay=0 --timeout=60 --silent-timeout=600 --final-timeout=7200 –offer-timeout=60 --num-threads=12 --tos=184 –no-fallback –log-level=7 --recording-dir=/var/spool/rtpengine/ " sudo systemctl restart rtpengine no output from below command: [root@sp201 iptables-extension]# tail -f /proc/rtpengine/0/list Can someone guide me where I am doing wrong? Thank you in advance. -- Regards, Suresh Talasaniya. Contact : +91-9724264776 Skype : suresh.talsaniya

1 0

UAC changing port for same registration
by Michal Popovic 02 Mar '21

02 Mar '21

Hello everybody, let's have a situation where UAC is behind the NAT and router suddenly change the external port. Kamailio in this case creates two location entries one with old port and one with the new one. Now UAC unregister from the new one and old location remains active until it expires and our support system that is listening to locations changes keep the agent online for other services. Is there any way besides the regular OPTIONS ping from UAS to UAC how to solve this issue? Thanks. Michal

3 2

how do you ell kamailio the targets?
by Daniel Siemens 01 Mar '21

01 Mar '21

Hi So how do I tell kamailio where my asterisk server is its to register against? Same goes for the modules like rtp engine? ------------------------------------------------------------------ This email is intended solely for the use of the addressee and may contain information that is confidential, proprietary, or both. If you receive this email in error please immediately notify the sender and delete the email. ------------------------------------------------------------------

1 0

event_route when all modules have been loaded?
by Juha Heinanen 01 Mar '21

01 Mar '21

Is there a way to execute event_route when all modules have been loaded and Kamalio is ready to process requests? I found this in core cookbook, but what if there is no udp sip worker processes? event_route[core:worker-one-init] - executed by core after the first udp sip worker process executed the child_init() for all modules, before starting to process sip traffic -- Juha

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users