sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

[Serusers] Re: How to change Caller ID in FROM field ?
by lawrence k.y. lin 21 Dec '06

21 Dec '06

Hi all, Appreciate if someone can give me a suggestion or even an answer. Since the call from SIP device to PSTN phone did not have Caller ID and our Telco carriers request for the Caller ID, we have to set a number before the calls are routed to PSTN gateway. I did it in Asterisk before with the function calls SetCallerID(CLID) or Set(CALLERID(number)=CLID) (depends on the Asterisk version) and these function calls worked. But because of the scalabliity issue, I changed to SER and would like to do the similar thing as in Asterisk. I read the SER document and awared SIP_HF_FROM has the data for the entired FROM field. Is there any other variables for Caller ID only ? I searched the mailing list for SER and did not find any related topic (only found one with title: caller-id with raius using sip-rpid, but it is irrelevant). Thanks in advance. Larry _________________________________________________________________ Try the next generation of search with Windows Live Search today! http://imagine-windowslive.com/minisites/searchlaunch/?locale=en-us&source=…

6 12

[Users] Realtime Call Monitoring
by lists＠infoway.net 21 Dec '06

21 Dec '06

We are Asterisk-only users and currently use Asterisk Flash Operator Panel (http://www.asternic.org/) to get a real-time view of the different phones/extensions, channels, etc. We are planning on enhancing our setup by adding SER/OpenSER in front of our Asterisk systems and to expand into other venues as well. If we wanted to use something like SEMS instead of Asterisk for certain services, is there any tool similar to the Flash Operator Panel (FOP) available for SER/OpenSER + SEMS? I guess we could always continue using FOP with our Asterisk systems fronted by SER/OpenSER. However, for our other plans where we prefer to use SEMS, we would love to see if there is any solution available (free, sponsored, or commercial). Thanks, Daniel

4 6

[Users] Re: any kind of statistics available
by Daniel-Constantin Mierla 21 Dec '06

21 Dec '06

Just to complete the thread, a new SNMP module is available for such purpose. In the announcement are listed several tools that can help to collect statistics and generate grphs. It is a matter of configuration and maybe small shell scripting: http://openser.org/pipermail/users/2006-December/008334.html http://cacti.net/ http://oss.oetiker.ch/mrtg/ At the first sight these tools can be used with FIFO or XMLRPC interface as well, if you write the shell script to collect the statistics. Cheers, Daniel Wienand, Joerg wrote: >> You can make a small script to pull periodically statistics via >> FiFO/XMLRPC into a database/file and from there generate graphics at >> your convenience. >> > > This is what I thought about. I expect that I'm not the only one who is > interested in statistics. So maybe anyone else has done this job before. ;-) > > regards, Jörg > >

1 0

Re: [Users] Problem with avp_check
by Bogdan-Andrei Iancu 21 Dec '06

21 Dec '06

Hi Jose, I think your regexp is not correct - you need to force the end of string, otherwise only a substring (prefix) will be matched. try avp_check("$fU","re/^[0-9]{10}$/g") regards, bogdan Jose Gil Navarrete wrote: > Hi thanks Andrei, I tried with your recomendation but I obtain the > same result, if $fu is: 012345678901, then "To-username > -012345678901-" is inserted > > if(avp_check("$fU","re/^[0-9]{10}/g")) { > insert_hf("To-username: -$rU- \r\n", "Call-ID"); > } else { > sl_send_reply("400", "Peticion Erronea, numero > invalido"); > }; > > > */Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>/* escribió: > > Hi Jose, > > the FM operator in avp_check is not for regular expressions - FM is a > file matching- like operator (like "sip:*@domain). See "man 3 > fnmatch". > > if you want to check against an regexp, you need to use the RE > operator. > See: > http://www.openser.org/docs/modules/1.2.x/avpops.html#AEN384 > > as RE op does not support an AVP as right operand, you should try: > if(avp_check("$fU","re/^[0-9]{10}/g")) { > > regards, > bogdan > > Jose Gil Navarrete wrote: > > > Hi > > I try to check the username in the URI, this is, if the username do > > not have ten digits then send a message, I made: > > > > avp_write("^[0-9]{10}","$avp(s:fm_avp)"); > > if(avp_check("$fU","fm/$avp(s:fm_avp)/g")) { > > insert_hf("To-username: -$fU- \r\n", "Call-ID"); > > } else { > > sl_send_reply("400", "Bad Request"); > > exit; > > }; > > > > but I ever obtain 400 message. > > > > I try too with: > > if(avp_check("$fU","re/[0-9]{10}$/g")) { > > insert_hf("To-username: -$fU- \r\n", "Call-ID"); > > else{ > > sl_send_reply("400", "Bad request"); > > exit; > > } > > > > But I obtain the same message. Any idea? > > > > __________________________________________________ > > Correo Yahoo! > > Espacio para todos tus mensajes, antivirus y antispam ¡gratis! > > Regístrate ya - http://correo.yahoo.com.mx/ > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Users mailing list > >Users(a)openser.org > >http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > __________________________________________________ > Correo Yahoo! > Espacio para todos tus mensajes, antivirus y antispam ¡gratis! > Regístrate ya - http://correo.yahoo.com.mx/ >

1 0

[Serusers] SER 0.9.x and 0.10.x on the same machine?
by TZieleniewski 21 Dec '06

21 Dec '06

Hi ALL!! Is it possible to have to different releases of ser on the same machine? Have any one tired that? I couldn't find any info the web, please help :) Thanks Bests tomek

3 3

[Users] OpenSER as load balancer for several Asterisk servers
by Edoardo Serra 21 Dec '06

21 Dec '06

Hi guys, I'm having a problem with an OpenSER acting as registrar server and load balancer for many Asterisk servers. In a few words: "users are registering on openser and, when they want to make a call, OpenSER proxies the request to an Asterisk server with the dispatcher module" Here is the intended data flow (SIP goes through OpenSER and media goes directly to Asterisk) User <-- SIP --> OpenSER <-- SIP --> Asterisk User <-- RTP --> Asterisk Both, OpenSER and Asterisks have public IPs I already have a working setup of that and everything seems working correctly. I'm trying to replicate that setup on another site, same configurations of the boxes, same versions of OpenSER and Asterisk, etc... but I'm having monodirectional Audio. Having a look with tethereal I see that OpenSER, when the communication is answered, sends a SIP packet (200 OK) to the user indicating itself as media endpoint instead of the Asterisks. From that moment I see RTP packets flowing from the client to OpenSER This seems really strange to me because I just copied the same configurations file from a working setup to the new installation. Tnx in advance for help. Regards P.S.: Here is my openser.cfg ## $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ ## simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) fork=yes #log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #children=4 #port=5060 fifo="/tmp/ser_fifo" #uid=nobody #gid=nobody # ------------------ module loading ---------------------------------- loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/nathelper.so" loadmodule "/usr/lib/openser/modules/textops.so" loadmodule "/usr/lib/openser/modules/exec.so" loadmodule "/usr/lib/openser/modules/uri.so" loadmodule "/usr/lib/openser/modules/uri_db.so" loadmodule "/usr/lib/openser/modules/dispatcher.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://xxx:xxx@xxx.xxx.xxx.xxx/openser") modparam("usrloc", "timer_interval", 120) modparam("auth_db", "calculate_ha1", 0) modparam("auth_db", "db_url", "mysql://xxx:xxx@xxx.xxx.xxx.xxx/voip") modparam("uri_db", "db_url", "mysql://xxx:xxx@xxx.xxx.xxx.xxx/openser") modparam("rr", "enable_full_lr", 1) modparam("registrar", "nat_flag", 6) modparam("registrar", "max_expires", 3600) modparam("registrar", "min_expires", 60) modparam("registrar", "append_branches", 0) modparam("registrar", "desc_time_order", 1) modparam("nathelper", "natping_interval", 20) # Ping interval 20 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT modparam("dispatcher", "force_dst", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; if ( (method=="OPTIONS") || (method=="SUBSCRIBE") || (method=="NOTIFY") ) { sl_send_reply("405", "Method Not Allowed"); exit; } if (!method=="REGISTER") { record_route(); }; if ((src_ip==xxx.xxx.xxx.xxx) || (src_ip==xxx.xxx.xxx.xxx)) { # IP of Asterisks if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; exit; }; if (nat_uac_test("3")) { if ((method=="REGISTER") || (method=="INVITE") || (method=="OPTIONS")) { fix_nated_contact(); force_rport(); setflag(6); # Mark as NATed } } # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { if (!proxy_authorize("domain", "openser_view")) { proxy_challenge("domain", "0"); exit; } if (!check_to()) { sl_send_reply("403", "Digest username and URI username do NOT match! Stay away!"); exit; } save("location"); exit; }; if (method=="INVITE") { if (!proxy_authorize("domain", "openser_view")) { proxy_challenge("domain", "0"); exit; } if (!check_from()) { sl_send_reply("403", "Digest username and URI username do NOT match! Stay away!"); exit; } } # loose-route processing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); exit; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); exit; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # ! Nathelper if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); exit; }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if ((src_ip!=xxx.xxx.xxx.xxx) && (src_ip!=xxx.xxx.xxx.xxx)) { # IP of Asterisks ds_select_dst("2", "0"); } if (!t_relay()) { sl_reply_error(); }; } # ! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; }

4 13

[Serusers] Multiple domain
by TZieleniewski 21 Dec '06

21 Dec '06

Hi ! A have a small technical question:) It considers serving of multiple domain. I would like to make sure that I understand things right. After I read the user doc and README from domain module I came to the following state of art:) 1)one has to create the seperate location and subscriber table for each domain *so if i have for instance two domains : dom1.com and dom2.com then my ser has to have the according dns records in the dns server? 2) after creating the tables i need to add domains record in the database to the domain table *I dont know why but when ever i try to add or show domains o get the following error 500 command 'domain_dump' not available - why is that so? any way instead of an error the serctl command adds the domain record to the database 3) modify the ser.cfg file - add appropriate modparam commands 4) modify the ser.cfg file by adding a regular expression analizys to invoke the save, www_chalenge, proxy_chalenge and lookup correctly with the right domain? Please tell me is my thinking here right? or maybe there is another way As allway thank u for your time. Bests tomek

3 3

Re: [Users] Delayed signalling?
by Jiri Kuthan 21 Dec '06

21 Dec '06

if you happen to have a PCAP file with the incident, let me please know. -jiri p.s. even if you didn't tweak timers, the results may be suboptimal because the software version you are using is having rather indeterministic timer subsystem. For example, the recent measurements (http://www.iptel.org/ser/doc/performance) show quite scattered server responsiveness under high load. (Note though that the measurement results were achieved in a best-effort manner based on the tester knowledge and understanding of openser and that the result are not officially confirmed by the OpenSER project.) Whether it is indeed the cause is not certain though -- this looks really like a stealth bug. At 15:58 15/12/2006, Max Gregorian wrote: >Thanks very much for all the replies. I shall try and post a config and traces as soon as I can get them from the office. > >Some more information, if it helps: > >Server specs: >- HP ProLiant DL360 G4 (1U rack servers) >- 3 GHz processors (800 MHz FSB) >- 1 GB RAM >- 10K rpm SCSI HDs (in a RAID 1+0 Mirror) > ># Servers are running OpenSER 1.0.1 (no-TLS). ># Servers are listening on 3 ports (both tcp and udp for each port), so in openserctl ps I am seeing 4 child processes for each port. ># Servers running CentOS Linux 4.3 ># MySQL installed when CentOS was installed but not running and not currently being used with Openser. > > >Things I have pretty much managed to eliminate are: >1. It's doesn't seem to be hardware. The specs for the servers are more than sufficient I think. >2. It doesn't seem to be traffic/load related as I see these problems on 2 brand new servers I have just installed with no traffic on them. However, it does seem to get worse with more traffic. >3. I don't think it's database related as I have deliberately not configured mysql on any of the servers in case of database performance. >4. I haven't played with the timers at all so far. >5. I haven't configured nscd yet, but as far as I can tell it's not caching DNS. >6. Though openser is listening on tcp ports as well, currently only the udp ports are being used as most of our customers use hardware phones. In any case, I haven't as yet seen as requests on tcp. >7. I am not sure it is DNS as in the tests I ran I sent requests directly to the external IP of the server and not to the domain name it is responsible for. Also the test servers are now only responsible for one domain, but in future will have more than one. >8. Also TTL on the domain name is really short. Ping from the server itself TTL=64 and ping times are low as you would expect (< 1ms when pinging from the server itself). Ping from outside the network (from the internet - for me - tp the domain was) 12ms (average), no packet loss, TTL = 53. >9. I have not setup any internal DNS entries for the domain. Servers are resolving domain from entries in /etc/hosts. > >Like I said, it doesn't happen all the time - just maybe once or twice every hour on the servers with more traffic. > >I ran SIPp pointing at one of the new servers last week and at around 100CPS I was seeing about 2,000 out of approx. 10,000 calls were failing. Setup was UAC -> openser -> UAS (Both UAC and UAS were running on the same machine, but different ports). Again there is no traffic on these servers now so I have no idea why so many failed calls. > >I am not sure if any of this information helps, but I am certainly open to suggestions on things to try. > >Thanks in advance. > > > >On 12/14/06, samuel <<mailto:samu60@gmail.com>samu60(a)gmail.com> wrote: >It might be due to a DNS query....whenver a request has to be >forwarded to a domain, openSER makes a DNS query to resolv the IP. >During this operation, the child processing the request will not >answer to further incoming messages. > >it also can be happening due to a spiral loop that stays on the server. > >Without further information (confg,logs) it's hard to tell which is >the reason... > >hope it helps, >Samuel. > >without more information > >2006/12/14, Max Gregorian <<mailto:gregorian442@googlemail.com>gregorian442(a)googlemail.com>: >> Hi all, >> >> Just wondering if anyone else has had this problem. I have noticed while >> tracing on my OpenSER server, that every now and then the server receives a >> packet which it does to respond to immediately, resulting in a string of >> packets being sent to the server and then the server responding a few >> seconds later. This does not happen all the time, just say maybe once or >> twice every hour. The rest of the time the signaling is correct and >> responses follow request packets in the correct order. >> >> What I am trying to figure out is whether this is a load traffic issue (i.e. >> can the server not handle too much load), and if so is it OpenSER or the >> network or the server in general? I have run diagnostics on the servers and >> there is nothing wrong with the hardware. >> >> On the other hand Could this be related to any timer issues? I remember >> there was mention of timers in SER but are there any default timer settings >> that can be tweaked? >> >> Thanks in advance for any response. >> >> >> _______________________________________________ >> Users mailing list >> <mailto:Users@openser.org>Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> > > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users -- Jiri Kuthan http://iptel.org/~jiri/

4 4

[Users] Problem with avp_check
by Jose Gil Navarrete 21 Dec '06

21 Dec '06

Hi I try to check the username in the URI, this is, if the username do not have ten digits then send a message, I made: avp_write("^[0-9]{10}","$avp(s:fm_avp)"); if(avp_check("$fU","fm/$avp(s:fm_avp)/g")) { insert_hf("To-username: -$fU- \r\n", "Call-ID"); } else { sl_send_reply("400", "Bad Request"); exit; }; but I ever obtain 400 message. I try too with: if(avp_check("$fU","re/[0-9]{10}$/g")) { insert_hf("To-username: -$fU- \r\n", "Call-ID"); else{ sl_send_reply("400", "Bad request"); exit; } But I obtain the same message. Any idea? __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.yahoo.com.mx/

2 1

[Users] flags in reply route
by Klaus Darilion 21 Dec '06

21 Dec '06

Hi! Do I have access to the flags of a transaction in a reply route? regards klaus -- Klaus Darilion nic.at

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users