sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Re: [Serusers] chain of rtp proxies ...
by Jiri Kuthan 11 Dec '06

11 Dec '06

At 18:46 09/12/2006, Cesc wrote: >A final question ... basically thinking out loud (and writing it down) :) >I read that rtpproxy won't start relaying until it got an rtp packet >from both sides ... is it true? yes >could this not cause problems, >specially with chained rtpproxies, if say, i have one of the phones >not sending rtp packets (say, it starts muted ... muted means no rtp >packets)? indeed but that's it. MS Windows Messenger does that for example with voice inactivity detection. You have to speak to hear. -jiri -- Jiri Kuthan http://iptel.org/~jiri/

2 1

[Users] mon script for openser ?
by G.Jacobsen 10 Dec '06

10 Dec '06

Hello, I intend to test openser health periodically with a (perl) script to see whether it is answering SIP requests - to be used for mon in combination with heartbeat. If anyone has done such thing I would be grateful for any code snippets. I suppose as another possibility one could use one of the Nagios sipsak scripts and modify that for mon ? Gerry

1 0

Re: [Serusers] account forwarded calls
by Mobashir Ahmed 10 Dec '06

10 Dec '06

this has always been a problem with Snom Sip Proxy. we are looking for a solution on this past many months. Please hlep.!! Regards, Mobashir Ahmed. ----- Original Message ---- From: Rosario Pingaro <rpingar(a)nesec.it> To: serusers(a)lists.iptel.org Sent: Sunday, December 10, 2006 2:46:20 PM Subject: [Serusers] account forwarded calls I implememented call forwarding using the exemple found on the onsip.org website. It is working fine but I have an accounting problem. Infact the forwared call is not accounted at all. This means that the accounting modle records the call as it is in the beginning ant not the second leg. Is there a way tha have accounted the forwarded call as originated from the forwader to bill him? Regards Rosario _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com

1 0

[Serusers] account forwarded calls
by Rosario Pingaro 10 Dec '06

10 Dec '06

I implememented call forwarding using the exemple found on the onsip.org website. It is working fine but I have an accounting problem. Infact the forwared call is not accounted at all. This means that the accounting modle records the call as it is in the beginning ant not the second leg. Is there a way tha have accounted the forwarded call as originated from the forwader to bill him? Regards Rosario

1 0

[Serusers] CDRs and NAT Issues
by Mobashir Ahmed 09 Dec '06

09 Dec '06

Hello All, Since the time i joined, i have been trying all these days to get all mails that i missed. Anyways, i have 2 questions at this point of time, 1. Whats the location where the CDRs are situated for SipX. and how are they saved. 2. Can we use somehow SipX as a Proxy along with the Nat Traversal. what other additions are required for it. Thanks and Regards, Mobashir Ahmed. ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail beta. http://new.mail.yahoo.com

1 0

Re: [Users] multiple BYEs getting accounted
by Jayesh Nambiar 09 Dec '06

09 Dec '06

Hi Bogdan, Thanks for your response. Actually I have setflag(1) at two places in my script. Its like : if(method=="BYE") { setflag(1); }; if(loose_route()) { ---- ---- }; setflag(1); Actually I added the first condition to make sure that BYEs are not missed. I think that condition is not needed, but then where is the best place to do setflag(1) and ,ake sure that BYEs dont get missed.. Is it before loose_route condition as I have my loose_route condition in the main route. FYI flag 1 is the flag for acc. Waiting for a reply, Thanks, Jayesh. ----- Original Message ---- From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> To: Jayesh Nambiar <voip_freak(a)yahoo.co.in> Cc: openser <users(a)openser.org> Sent: Friday, 8 December, 2006 10:56:20 PM Subject: Re: [Users] multiple BYEs getting accounted Hi Jayesh, normally, acc is done on transaction level, so the retransmission are not accounted. Are you forcing acc from script via functions?? or maybe you have 2 BYEs, from both directions? regards, bogdan Jayesh Nambiar wrote: > Hi all, > I am using mysql acc table for accounting. Sometimes due to some NAT > issues, my openser does not acknowledge the BYE from these NATed > clients to proper port. This causes the UA to retransmit BYEs. > Now the problem is that all the BYEs that were received by my openser > are accounted in the acc table, This causes a single INVITE to have > multiple BYEs. I wanted to avoid this. > How could I limit it in the script itself that > "whenever a BYE is received; log it in acc table, but if it is a > retransmited BYE for any reaason do not log it in acc table". > Basically I need only single BYE for an INVITE to get logged in the > acc table. Is this possible? > If someone has any clues over it, please help me. > > Thanks in advance, > > w/regards, > jayesh > > ------------------------------------------------------------------------ > Find out what India is talking about on - Yahoo! Answers India > <http://us.rd.yahoo.com/mail/in/yanswers/*http://in.answers.yahoo.com/> > Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. > Get it NOW > <http://us.rd.yahoo.com/mail/in/messengertagline/*http://in.messenger.yahoo.…> > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

[Users] How do manipulate the FROM field form a SIP message
by Ricardo Martins 08 Dec '06

08 Dec '06

Folks, I´m trying to manipulate the FROM field from a sip message and could not find any way to do that. Tryied using AVPOPS but the problem is that the "push_to" function only works on URI (destination) fields. Anyone could help me with a trick? Best regards to you all. Ricardo Martins.

2 1

[Users] multiple BYEs getting accounted
by Jayesh Nambiar 08 Dec '06

08 Dec '06

Hi all, I am using mysql acc table for accounting. Sometimes due to some NAT issues, my openser does not acknowledge the BYE from these NATed clients to proper port. This causes the UA to retransmit BYEs. Now the problem is that all the BYEs that were received by my openser are accounted in the acc table, This causes a single INVITE to have multiple BYEs. I wanted to avoid this. How could I limit it in the script itself that "whenever a BYE is received; log it in acc table, but if it is a retransmited BYE for any reaason do not log it in acc table". Basically I need only single BYE for an INVITE to get logged in the acc table. Is this possible? If someone has any clues over it, please help me. Thanks in advance, w/regards, jayesh __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

2 1

[Users] Domain: is_from_local() is case sensitive in caching mode.
by Papadopoulos Georgios 08 Dec '06

08 Dec '06

hello, Back in March I posted the following http://openser.org/pipermail/users/2006-March/003426.html The problem was solved with the patch that Klaus sent http://openser.org/pipermail/users/2006-March/003456.html However in Openser 1.1 it seems that there is still a problem. The following code shows how hash("iptel.org") != hash("ipTel.org") Any patches for this? thank you George #include "hash_func.h" int main(int a, char* arg){ char s1[50] = "iptel.org"; char s2[50] = "ipTel.org"; str str1, str2; str1.s = s1; str1.len = strlen(s1); str2.s = s2; str2.len = strlen(s2); printf("s1=%s s2=%s\n", s1, s2); unsigned int r1 = core_case_hash(&str1, 0, 128); unsigned int r2 = core_case_hash(&str2, 0, 128); printf("r1=%u r2=%u\n", r1, r2); return 0; } Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Users] presence module
by henri keski-sikkila 08 Dec '06

08 Dec '06

Hello, I have some problems with presence module. When I use presence module it uses all available memory until there isn't any memory left. If I take ps or top there are many openser prosess but only one of them uses more and more memory all the time. Best Regards, Henri

4 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users