sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

[Users] TCP REGISTER
by Russ Daigle 14 Nov '06

14 Nov '06

When I REGISTER for UDP, I receive subsequent requests for that user. However, when I perform a TCP REGISTER, even though the register returns 200 OK, no requests make it to the user. Is this supported? It should be. However, I noticed when you do a "openserctl ul show" command, it shows users, but it doens't indicate whether they are UDP or TCP registered. -Russ

2 1

[Users] UAC's aren't hung up, Audio is fine in 2 way
by raviprakash sunkara 14 Nov '06

14 Nov '06

Hello Users, tried a lot , My UAC's are Not Hungupping in Behind the NAT/Router And also My sip proxy is also under the Behind NAT My SIP ip is 192.168.2.75 My Public IP is xx.xx.xx.xx I didn't get any Bye request to SIP server, except the Bye all the other Messages are Requested to MY SIP Server in openser.cfg i I'm using X-lites for testing in that RTP port 12222 NAT firewall ip is 192.168.2.1 Sip domain is xx.xx.xx.xx Sip proxy xx.xx.xx.xx ______________________________________________ modparam ("nathelper",rtpproxy_sock","udp: 192.168.2.75:12222" if(nat_uac_test("19")) { if(method=="REGISTER") { fix_nated_register(); force_rport(); setflag(6); } else { if(method=="INVITE") { fix_nated_sdp("3") }; fix_nated_contact(); }; }; -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

1 0

[Serusers] retr_timer1p1
by Andrey Kuprianov 14 Nov '06

14 Nov '06

Hi Guys, Is retr_timer1p1 still valid for SER 0.9.6? Andrey.

2 2

[Serusers] SER pre-release - Presence and NOTIFY
by SER LIST 14 Nov '06

14 Nov '06

Hi, I have SER Proxy and PRESENCE running on different machines. REGISTERS are being forwarded by SER Proxy to PRESENCE and PRESENCE is storing the location information in "location" db. What I am seeing is that when the PRESENCE Server sends NOTIFYs to watchers, it sends them to the SER PROXY (destination IP Is that of SER PROXY) but the URI in NOTIFY is that of the watchers LOCATION INFO. Is this correct? I would like the NOTIFY URI to contain the SIP DOMAIN and not the contact info. e.g. user 444 registers with SER PROXY (sip.xx.com). It is registering from 10.1.1.1:12321 (location info). SER PROXY sends the REGISTER TO Presence server which stores this info in location database (location is 444@10.1.1.1:12321). Now when Presence Server sends NOTIFY, it sends it to the SER PROXY IP BUT the NOTIFY URI IS: NOTIFY sip:444@10.1.1.1:12321 SIP/2.0 How can I have the NOTIFY URI to be : NOTIFY sip:444@sip.xx.com SIP/2.0 Any suggestions would be higlhy appreciated. _________________________________________________________________ Ready for the world's first international mobile film festival celebrating the creative potential of today's youth? Check out Mobile Jam Fest for your a chance to WIN $10,000! www.mobilejamfest.com

3 3

[Serusers] Presence Client
by Ajay Kolambekar 14 Nov '06

14 Nov '06

Hi, To test the presence capability of SER which presence client application I can use? Regards, Ajay DISCLAIMER ========== This e-mail may contain privileged and confidential information which is the property of Persistent Systems Pvt. Ltd. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Persistent Systems Pvt. Ltd. does not accept any liability for virus infected mails.

2 1

Re: [Serusers] Any resolution to the presence core dump?
by SER LIST 14 Nov '06

14 Nov '06

Yes. It seems to be fixed in the CVS version. I am running the CVS version since four days and I have not had a core dump. I am testing further and will post any issues I find. Thanks >From: Vaclav Kubart <vaclav.kubart(a)iptel.org> >To: SER LIST <sergrp(a)hotmail.com> >CC: serusers(a)iptel.org >Subject: Re: [Serusers] Any resolution to the presence core dump? >Date: Mon, 13 Nov 2006 14:25:16 +0100 > >It could be corrected in CVS version, but it is not sure. (There were >few bugs in presence snapshot 4.1 corrected in CVS.) > Vaclav > >On Sun, Nov 05, 2006 at 10:32:34PM -0500, SER LIST wrote: > > I was wondering whether a patch or a new release is available to the >issue > > of presence core dumping on a regular basis that was reported short >while > > back? Thanks in advance. > > > > >The version 0.10.99 of presence snapshot core dumps on a regular > > basis after running for a certain time. Doing a gdb shows that the core > > dump occurs at msg_queue_destroy: > > >#0 0x001b87f2 in msg_queue_destroy (q=0xb6293e98) > > > at /usr/local/src/ser-0.10.99-dev35-pa-4.1/lib/../fastlock.h:147 > > >147 asm volatile( > > > > > > > _________________________________________________________________ > > Not only does Windows Live? OneCare? provide all-in-one PC care to keep > > your computer protected and well-maintained, but it also makes creating > > backup files a breeze. Try it today! > > >http://ideas.live.com/programpage.aspx?versionid=b2456790-90e6-4d28-9219-5d… > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ Not only does Windows Live OneCare provide all-in-one PC care to keep your computer protected and well-maintained, but it also makes creating backup files a breeze. Try it today! http://ideas.live.com/programpage.aspx?versionid=b2456790-90e6-4d28-9219-5d…

2 1

[Serusers] Problem with SER modules, mediaproxy.so and domain.so
by jk 14 Nov '06

14 Nov '06

Hello, I am totally confused, Installed ser rpm on FC5, with all the modules, If I start ser with out mediaproxy.so and domain.so modules every thing works great. But When I add these two mosules I start getting in problem and it does not start. Here is the error, 1(0) DEBUG: init_mod_child (-1): tm 1(0) DEBUG: callid: '74fe3fe7-0(a)xxx.xxx.xxx.xxx' 1(0) DEBUG: init_mod_child (-1): usrloc 1(0) get_connection(): Connection not found in the pool 2(0) INFO: fifo process starting: 11768 2(0) DEBUG: init_mod_child (-2): tm 2(0) DEBUG: callid: '74fe3fe7-0(a)xxx.xxx.xxx.xxx' 2(0) DEBUG: init_mod_child (-2): usrloc 2(0) get_connection(): Connection not found in the pool 0(11766) DEBUG: init_mod_child (1): tm 0(11766) DEBUG: callid: '74fe3fe7-11766(a)xxx.xxx.xxx.xxx' 0(11766) DEBUG: init_mod_child (1): usrloc 0(11766) get_connection(): Connection not found in the pool 1(11767) DEBUG: init_mod_child (-1): auth_db 0(11766) DEBUG: init_mod_child (1): auth_db 1(11767) get_connection(): Connection found in the pool 0(11766) get_connection(): Connection found in the pool 1(11767) DEBUG: init_mod_child (-1): uri_db 0(11766) DEBUG: init_mod_child (1): uri_db 1(11767) get_connection(): Connection found in the pool 0(11766) get_connection(): Connection found in the pool 1(11767) DEBUG: init_mod_child (-1): domain 0(11766) 1(11767) DEBUG: init_mod_child (1): domain DEBUG: init_mod_child (-1): nathelper 0(11766) get_connection(): Connection not found in the pool 1(11767) DEBUG: init_mod_child (-1): avpops 1(11767) get_connection(): Connection found in the pool 1(11767) DEBUG: init_mod_child (-1): permissions 2(11768) DEBUG: init_mod_child (-2): auth_db 2(11768) get_connection(): Connection found in the pool 2(11768) DEBUG: init_mod_child (-2): uri_db 2(11768) get_connection(): Connection found in the pool 2(11768) DEBUG: init_mod_child (-2): domain 2(11768) DEBUG: init_mod_child (-2): nathelper 2(11768) DEBUG: init_mod_child (-2): avpops 2(11768) get_connection(): Connection found in the pool 2(11768) DEBUG: init_mod_child (-2): permissions 2(11768) get_connection(): Connection found in the pool * 0(11766) new_connection(): Access denied for user 'serro'@'localhost' (using password: YES) I have not idea why it is using serror@localhost to connect to db. I will post my config files (ser.cfg and serctl) below. * 0(11766) db_init(): Could not create a connection * 0(11766) ERROR:domain_db_init: cannot initialize database connection 0(11766) ERROR: domain:child_init(): Unable to connect to the database 0(11766) init_mod_child(): Error while initializing module domain 0(11766) main_dontfork: init_child failed 2(11768) INFO: signal 15 received 2(11768) Memory status (pkg):* 2(11768) 1(11767) INFO: signal 15 received 1(11767) Memory status (pkg): 1(11767) fm_status (0x811c800): 1(11767) heap size= 1048576 Top part of ser.cfg file [root@ ser]# more ser.cfg # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=5 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ #listen=192.168.2.201 listen=209.XXX.XXX.XXX check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" a fifo_db_url="mysql://username:password@host/ser_db" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" loadmodule "/usr/lib/ser/modules/avpops.so" loadmodule "/usr/lib/ser/modules/permissions.so" #loadmodule "/usr/lib/ser/modules/domain.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- modparam("auth_db|permissions|uri_db|usrloc", "db_url", "mysql://username:password@host/ser_db") modparam("auth_db", "calculate_ha1", 0) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("avpops", "avp_url", "mysql://username:password@host/ser_db") modparam("avpops", "avp_table", "usr_preferences") # main routing logic route { SERCTL file # configuration for starting/stopping ser PID_FILE=/var/run/ser.pid SYSLOG=1 # 0=output to console, 1=output to syslog STARTOPTIONS= # for example -dddd DIR=`dirname $0` SERBIN=$DIR/ser AWK=awk # ser's FIFO server if [ -z "$SER_FIFO" ]; then SER_FIFO=/tmp/ser_fifo fi # period in which stats are reprinted if [ -z "$WATCH_PERIOD" ] ; then WATCH_PERIOD=2 fi # SQL config if [ -z "$SQL_DB" ] ; then SQL_DB=ser_DB fi if [ -z "$SQL_HOST" ] ; then SQL_HOST=SER_HOST //not localhost fi if [ -z "$SQL_USER" ] ; then SQL_USER=username fi # the read-only user for whom password may be stored here if [ -z "$RO_USER" ] ; then RO_USER=usename fi if [ -z "$RO_PW" ] ; then RO_PW=password fi # binaries GENHA1='gen_ha1' MYSQL='mysql' SER='sr' LAST_LINE='tail -1' # ACL name verification VERIFY_ACL=1 ACL_GROUPS="local ld int voicemail free-pstn prepaid" VERSION='$Revision: 1.83.2.2 $' NOTE: If I dont add mediaproxy.so and domain.so then everything works lgreate Ser verision [root@ ser]# rpm -qa | grep ser- ser-serweb-0.9.6-6.fc5 ///This also did not work, problem with classkit and runkit extension. If any one could make it work on FC5 with PHP 5.1, Please share. ser-mysql-0.9.6-6.fc5 ser-0.9.6-6.fc5 I am tired like dead, Any idea will be help. Thank you, -JK

1 0

[Serusers] Please help with radius-ser mysql setup
by Lokesh Kumar 13 Nov '06

13 Nov '06

Hello List, I had setup ser-0.9.6 and freeradius-1.1.3. I am able to authenticate sip users via radius using entries in mysql database, but unable to do group membership checking with mysql database, but if I use users text file for group checking it works fine. The mentioned below link have the logs and entries in mysql database. HYPERLINK "http://pastebin.ca/247613"http://pastebin.ca/247613 As Mr. Greger suggested in previous post not to challenge options message (second message) , for that I included one line in users file like @mydomain.pt NAS-Port == 0, NAS-IP-Address == "127.0.0.1", Auth-Type := Accept And authentication works fine, is it right way to avoid challenging 2 options, or is it creating problem in group membership checking. My radiusd.conf file has sql and files entries under authorize section in the order of sql files Please suggest something. Thanks you very much Lokesh -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.409 / Virus Database: 268.14.3/531 - Release Date: 11/12/2006

1 0

[Serusers] Help needed with radius-mysql and group authorization checking
by Lokesh Kumar 13 Nov '06

13 Nov '06

Hello List, I have problem with the group membership checking of ser calls with radius using mysql module. Well group checking is working fine with the users file but when I try to do that checking with mysql entries it always getting failed. Below mentioned is section of my users file 211069020(a)mydomain.pt Sip-Group == "int", Auth-Type := Accept Reply-Message = "Authorized" What should be the entries corresponding to the above mentioned in mysql tables of radgroupcheck and radgroupreply. I am using freeradius-1.1.3 with default values in sql.conf file. Here are the table entries of mysql. mysql> select * from radcheck; +----+----------------------------+-----------+----+-----------+ | id | UserName | Attribute | op | Value | +----+----------------------------+-----------+----+-----------+ | 2 | 211069020(a)mydomain.pt | Password | == | 211069020 | | 33 | 211069020(a)mydomain.pt | Auth-Type | := | Digest | +----+----------------------------+-----------+----+-----------+ 2 rows in set (0.00 sec) My sip clients can authenticate with mysql entries but can not do group authorization. Please suggest something Thanks very much Lokesh -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.409 / Virus Database: 268.14.3/531 - Release Date: 11/12/2006

2 1

[Users] The Summit picx are So Good,
by raviprakash sunkara 13 Nov '06

13 Nov '06

Hello Users , Thanks to *Bogdan-Andrei Iancu* *Daniel-Constantin Mierla* *Dmitry Isakbayev* *Elena-Ramona Modroiu* *Glenn Dalgliesh* *Klaus Darilion* *Mike Williams* *Norman Brandinger I'M very glad to see in U in Summit pics on Nov 7-9 , * -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users