sr-users

sr-users@lists.kamailio.org

33 participants
37542 discussions

[Serusers] Via Format?
by Ricardo Martinez 29 Aug '06

29 Aug '06

Hello list. Sorry to ask this question here, but i can't find the answer in the RFC3261 Is this "VIA" permited according to the RFC? Via: SIP/2.0/UDP 69.20.6.205:15060, SIP/2.0/UDP 69.1.229.69:4081;branch=z9hG4bK-58e9ccfcef0f4c99915b8007cb9713e1-1156793814 It seems to be two VIA's in ONE line... Thanks Regards, Ricardo.-

3 3

RE: [Users] Please help me in Openser Admin
by peter.3.edwards＠bt.com 29 Aug '06

29 Aug '06

> 1. Is openser adminstrator a web application? I mean, does it have > same function like "serweb" in ser? "OpenSER Administrator: Mission The mission is to provide a simple interface to OpenSER that can be quickly and easily modified and upgraded. It is not designed to provide an interface for the customer, but is to be used only for administration duties." http://openseradmin.sourceforge.net/ > 2. How to install the openser administrator in openser server? > I use openser1.1.0-tls and what packets does it need? OpenSER Administrator: Installation http://openseradmin.sourceforge.net/docs.php > 3.Is the openser administrator just used by the administrator to manage > his/her server? or The openser administrator can be used like a > serweb?(the client also can use it) because as I read from the reply > message in this forum, the serweb can not use for openser1.1.0-tls See answer to question 1. > 4. If it is not like serweb, can anybody tell me what is the suitable > web application for openser ? As far as I'm aware from reading the website and mailing list archives, the only web application designed for use with OpenSER is OpenSER Administrator. It sounds like it might be possible to modify SERweb but that would require going "under the hood" ... Ferianto, all of this information is easily found from the website - rather copying your mail to three mailing lists which each have a slightly different remit, you may find you'd get a better response if you do some initial research first and then direct any further questions you still have, to the most appropriate list instead of sending to all of them at once. Even Microsoft know ... How to ask a question http://support.microsoft.com/?kbid=555375 HTH, Peter. -- Peter Edwards This Personal email contains my own opinions, sent In Confidence and does not represent the views of British Telecommunications plc. __________________________________________________________________ British Telecommunications plc Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no. 1800000 This electronic message contains information from British Telecommunications plc which may be privileged and confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by telephone or email (to the number or address above) immediately. Activity and use of the British Telecommunications plc email system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system will also be monitored and may be recorded to secure effective operation and for other lawful business purposes.

1 0

[Serusers] verify if an avp is null
by Joana Smith 29 Aug '06

29 Aug '06

Hi everyone!! How can I verify if an avp is null?? I tried if( $avp_name == '') {} but this doesn't work. any suggestions? tks a lot ps - I know that is possible to use is_sattr_set but I think avp module is deprecated in favor of avpops _______________________________________________________________________________________ Sabe em quanto tempo damos resposta para ter 4000Euros? Saber mais em http://www.iol.pt/correio/rodape.php?dst=0607071

1 0

[Users] Voice-System SRL OpenSER Syslog Tutorial note suggestion
by peter.3.edwards＠bt.com 29 Aug '06

29 Aug '06

Hi, I've modified the Basic OpenSER Logging tutorial, to include a Solaris compatible entry for /etc/syslog.conf (note included below): http://www.openser.org/dokuwiki/doku.php?id=basic_openser_syslog_tutoria l The Voice-System SRL OpenSER Syslog Tutorial, could also do with having the same note added to this page: http://www.voice-system.ro/docs/ser-syslog/ar01s06.html Daniel, I've noted that you post here and that you're also the author of the above doc ... I thought you might want to look it over to see if it's worth including ... Cheers, Peter. "Note: that on Solaris 9 (and maybe other systems), the asterisk (*) is NOT a Priority Level ONLY a Source Facility - which means it can only be used on the left, and not the right of the period (.). In such a case, this equivalent line will also cause all messages to be logged ("debug" and higher priorities, "debug" is the lowest priority): local7.debug -/var/log/openser Source: Source Facilities VS. Priority Levels, page 267; Darrell Ambro - Solaris System Administration" -- Peter Edwards tel +44 (0) 1473 606492 This Personal email contains my own opinions, sent In Confidence and does not represent the views of British Telecommunications plc. __________________________________________________________________ British Telecommunications plc Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no. 1800000 This electronic message contains information from British Telecommunications plc which may be privileged and confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by telephone or email (to the number or address above) immediately. Activity and use of the British Telecommunications plc email system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system will also be monitored and may be recorded to secure effective operation and for other lawful business purposes.

1 0

[Serusers] Ser x Postgres
by Daniel Mirrha Santos 29 Aug '06

29 Aug '06

Its possible to use postgres to authenticate ser users? What I have to do to make it work with postgres? Thanks, Daniel

2 2

[Serusers] Build problem
by Greg Martin 29 Aug '06

29 Aug '06

I'm trying to build ser-0.9.6 on a sparc machine. 180> uname -rvmap SunOS tc90dv03 5.8 Generic_108528-13 sun4u sparc SUNW,UltraAX-i2 The errors I'm getting are: 172> make INSTALL=install include_modules="mysql" Makefile.rules:80: action.d: No such file or directory Makefile.rules:80: crc.d: No such file or directory Makefile.rules:80: daemonize.d: No such file or directory Makefile.rules:80: data_lump.d: No such file or directory Makefile.rules:80: data_lump_rpl.d: No such file or directory Makefile.rules:80: dprint.d: No such file or directory Makefile.rules:80: dset.d: No such file or directory Makefile.rules:80: error.d: No such file or directory Makefile.rules:80: fifo_server.d: No such file or directory Makefile.rules:80: flags.d: No such file or directory Makefile.rules:80: forward.d: No such file or directory Makefile.rules:80: hash_func.d: No such file or directory Makefile.rules:80: ip_addr.d: No such file or directory Makefile.rules:80: main.d: No such file or directory Makefile.rules:80: md5.d: No such file or directory Makefile.rules:80: md5utils.d: No such file or directory Makefile.rules:80: modparam.d: No such file or directory Makefile.rules:80: msg_translator.d: No such file or directory Makefile.rules:80: pass_fd.d: No such file or directory Makefile.rules:80: proxy.d: No such file or directory Makefile.rules:80: qvalue.d: No such file or directory Makefile.rules:80: re.d: No such file or directory Makefile.rules:80: receive.d: No such file or directory Makefile.rules:80: resolve.d: No such file or directory Makefile.rules:80: route.d: No such file or directory Makefile.rules:80: route_struct.d: No such file or directory Makefile.rules:80: script_cb.d: No such file or directory Makefile.rules:80: socket_info.d: No such file or directory Makefile.rules:80: sr_module.d: No such file or directory Makefile.rules:80: stats.d: No such file or directory Makefile.rules:80: tcp_main.d: No such file or directory Makefile.rules:80: tcp_read.d: No such file or directory Makefile.rules:80: timer.d: No such file or directory Makefile.rules:80: tsend.d: No such file or directory Makefile.rules:80: udp_server.d: No such file or directory Makefile.rules:80: unixsock_server.d: No such file or directory Makefile.rules:80: usr_avp.d: No such file or directory Makefile.rules:80: mem/f_malloc.d: No such file or directory Makefile.rules:80: mem/mem.d: No such file or directory Makefile.rules:80: mem/memtest.d: No such file or directory Makefile.rules:80: mem/q_malloc.d: No such file or directory Makefile.rules:80: mem/shm_mem.d: No such file or directory Makefile.rules:80: mem/vq_malloc.d: No such file or directory Makefile.rules:80: parser/hf.d: No such file or directory Makefile.rules:80: parser/msg_parser.d: No such file or directory Makefile.rules:80: parser/parse_allow.d: No such file or directory Makefile.rules:80: parser/parse_content.d: No such file or directory Makefile.rules:80: parser/parse_cseq.d: No such file or directory Makefile.rules:80: parser/parse_disposition.d: No such file or directory Makefile.rules:80: parser/parse_diversion.d: No such file or directory Makefile.rules:80: parser/parse_event.d: No such file or directory Makefile.rules:80: parser/parse_expires.d: No such file or directory Makefile.rules:80: parser/parse_fline.d: No such file or directory Makefile.rules:80: parser/parse_from.d: No such file or directory Makefile.rules:80: parser/parse_hname2.d: No such file or directory Makefile.rules:80: parser/parse_hostport.d: No such file or directory Makefile.rules:80: parser/parse_methods.d: No such file or directory Makefile.rules:80: parser/parse_nameaddr.d: No such file or directory Makefile.rules:80: parser/parse_param.d: No such file or directory Makefile.rules:80: parser/parse_rpid.d: No such file or directory Makefile.rules:80: parser/parse_rr.d: No such file or directory Makefile.rules:80: parser/parse_sipifmatch.d: No such file or directory Makefile.rules:80: parser/parse_to.d: No such file or directory Makefile.rules:80: parser/parse_uri.d: No such file or directory Makefile.rules:80: parser/parse_via.d: No such file or directory Makefile.rules:80: parser/parser_f.d: No such file or directory Makefile.rules:80: parser/digest/digest.d: No such file or directory Makefile.rules:80: parser/digest/digest_parser.d: No such file or directory Makefile.rules:80: parser/digest/param_parser.d: No such file or directory Makefile.rules:80: parser/contact/contact.d: No such file or directory Makefile.rules:80: parser/contact/parse_contact.d: No such file or directory Makefile.rules:80: db/db.d: No such file or directory Makefile.rules:80: db/db_fifo.d: No such file or directory Makefile.rules:80: lex.yy.d: No such file or directory Makefile.rules:80: cfg.tab.d: No such file or directory yacc -d -b cfg cfg.y conflicts: 1 shift/reduce make: *** [cfg.tab.c] Broken Pipe Any help would be appreciated, thanks. Greg Martin CTO Consumer Application Architecture TELUS Communications Company Phone: (780) 493-2786 Cell: (780) 718-4139

2 1

[Users] Question about GFLAGS Module
by Michel Zenone 29 Aug '06

29 Aug '06

Hi! I wonder if there is only a unique bitmap of flags or if there is a bitmap of flags for each SIP dialog? Thanks! Michel

2 1

[Users] Using subst() of Textops module
by Leonid Fainshtein 29 Aug '06

29 Aug '06

Hi, In the textops module doc (http://openser.org/docs/modules/1.0.x/textops.html#AEN124) there is an example that demonstrates how to replace URI in the header "To" with the message URI: # replace the uri in to: with the message uri (just an example) if ( subst('/^To:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/t:\1\u\2/ig') ) {}; After I've fixed a small mistake (instead of /t: I put /To:) it worked. But I don't understand how does it work. It looks like "u" is substituted by URI from R-URI but I didn't find such core variable. Could somebody explain me? Thank you in advance, Leonid Fainshtein

3 2

[Serusers] Serweb: HTTP 403 Forbidden error
by Roberto Lopes 29 Aug '06

29 Aug '06

Dear SER Users, I've a problem with Serweb and I hope somebody could help me out I know this problem was already talked about but i never saw a solution to it, so I'll post it again hoping somebody will know how to solve this mistake. So the problem is that when i try to put serweb working in my firefox browser the following error is shown: Forbidden You don't have permission to access /serweb/index.html on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. ------------------------------ Apache/2.2.0 (Fedora) Server at xxx.xxx.xxx.xxx Port 80 I think i installed everything correctly. I'll show some of the configurations I've made #1 - In "/etc/php.ini" I changed the memory limit from 8 to 12M because of the Serweb extension classkit.so … memory_limit = 12M #2 - I used pear to install classkit.so pear install <path to classkit-0.4.tgz> #3 - In "php.ini" … ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; … extension=classkit.so #4 - In "/serweb-0.4/config/config_data_layer.php": … $config->data_sql->host[$i]['host']="<IP MySQL Server>"; … $config->data_sql->host[$i]['user']="<DB User>"; $config->data_sql->host[$i]['pass']="<User password>"; .. #5 - In "/root/instalacao/serweb-0.9.4/config/config_paths.php" $config->root_path="/root/instalacao/serweb- 0.9.4/html/"; #6 - I created a log file touch /var/log/serweb chown apache /var/log/serweb #7 - I created a folder for SIP domain mkdir /root/installation/serweb-0.4/html/domains/xxx.xxx.xxx.xxx(IP of SER) #8 - I copied the files and folder from the default folder ("/root/installation/serweb-0.4/html/domains/_default/") to the one i created. #9 - I specified the SIP domain in the file "/root/installation/serweb-0.4/config/set_domain.php": … $config->domain = "xxx.xxx.xxx.xxx(IP of SER)"; … #10 - I enabled logging in file "/root/installation/serweb-0.4 /config/config.php": … $config->enable_loging = true; $config->log_file = "/var/log/serweb; #11 - In /etc/httpd/conf/httpd.conf I added an alias … <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order deny,allow Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable root #UserDir public_html </IfModule> Alias /serweb/ "/root/instalacao/serweb-0.9.4/html" <Directory "/root/instalacao/serweb-0.9.4/html"> Options Indexes MultiViews Options +FollowSymlinks AllowOverride None Order Deny,Allow Allow from all </Directory> ... #12 - I then put some commands for Apache to begin when computer would start chkconfig httpd on service httpd start #13 - I introduced the following URL http://<IP of SER>/<alias i wrote in httpd.conf>/ http://xxx.xxx.xxx.xxx/serweb/ And then that HTTP 403 error shows up I really hope somebody can help me because I'm doing a VoIP project for my school and I'd really like to have everything done in time. Thank you for your attention, Roberto Lopes

2 1

Re: [Serusers] Proxy Authentication
by Andrey Kouprianov 29 Aug '06

29 Aug '06

Hi, Why are you selecting 313814? The problem is with 313812 isnt it? Your trace log shows the conflict between 313812 and 313813 (not 313814)... :) Here's the examle (from RFC document) of authorizationm response from the client back to the server with a 2nd INVITE... Authorization: Digest username="bob", realm="biloxi.com", nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093", uri="sip:bob@biloxi.com", qop=auth, nc=00000001, cnonce="0a4f113b", response="6629fae49393a05397450978507c4ef1", opaque="5ccc069c403ebaf9f0171e9517f40e41" As you can see uri is "sip:bob@bioxy.com" as well as the username is "bob" as well (i.e. they are same)... That gives me an impression there's something wrong with ur client-side setup.. Regards, Andrey. On 8/29/06, Javier Oviedo <joviedo(a)plcendesa.com> wrote: > Andrey Kouprianov escribió: > > Hi, > > > > First of all it is GREAT that you've sent your logs and ser.cfg!! I > > wish everyone would do it (however, this is rarely the case). > > > > You SJPhone cannot call, because for some reason your URI and username > > differ. Take a closer look at this part: > > > > Proxy-Authorization: Digest > > username="313813",realm="localhost",nonce="44f307373cf9fb29da3028442e23f976513fc91d",uri="sip:313812@sipserver.es",response="bfd77c8cdc1066487b170b19e1e0fe61",algorithm=MD5 > > > > > > The username is 313813, but the URI is sip:313812@sipserver.es. Notice > > any difference? Plz, take a look at your account setup in SJPhone > > closely. I think the problem should be there. > > > > Regards, > > > > Andrey. > > > > On 8/28/06, Javier Oviedo <joviedo(a)plcendesa.com> wrote: > >> > >> Hi all > >> > >> In my network schema I have a Sip Express Router to authenticate my > >> outbound > >> calls to a PSTN. I add a new equipment to a ser with "serctl add user > >> pass > >> e-mail" command. My softphone is registered in proxy but when I make > >> a call > >> to a PSTN I obtain the following error: Call rejected: 407 Proxy > >> Authentication Rquired : > >> > >> I use the SJPhone software. > >> > >> Any idea about where is the problem > >> > >> Thanks in advance > >> Joe > >> > >> My ser configuration is: > >> > >> debug=3 > >> fork=no > >> log_stderror=yes > >> > >> port=5060 > >> children=4 > >> > >> dns=no > >> rev_dns=no > >> fifo="/tmp/ser_fifo" > >> fifo_db_url="mysql://ser:heslo@localhost/ser" > >> > >> loadmodule "/usr/local/lib/ser/modules/mysql.so" > >> loadmodule "/usr/local/lib/ser/modules/sl.so" > >> loadmodule "/usr/local/lib/ser/modules/tm.so" > >> loadmodule "/usr/local/lib/ser/modules/rr.so" > >> loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > >> loadmodule "/usr/local/lib/ser/modules/usrloc.so" > >> loadmodule "/usr/local/lib/ser/modules/registrar.so" > >> loadmodule "/usr/local/lib/ser/modules/auth.so" > >> loadmodule "/usr/local/lib/ser/modules/auth_db.so" > >> loadmodule "/usr/local/lib/ser/modules/uri_db.so" > >> > >> modparam("auth_db|uri_db|usrloc", "db_url", > >> "mysql://ser:heslo@localhost/ser") > >> modparam("auth_db", "calculate_ha1", 1) > >> modparam("auth_db", "password_column", "password") > >> modparam("usrloc", "db_mode", 2) > >> modparam("rr", "enable_full_lr", 1) > >> > >> route { > >> > >> # > >> ----------------------------------------------------------------- > >> # Sanity Check Section > >> # > >> ----------------------------------------------------------------- > >> if (!mf_process_maxfwd_header("10")) { > >> sl_send_reply("483", "Too Many Hops"); > >> break; > >> }; > >> > >> if (msg:len > max_len) { > >> sl_send_reply("513", "Message Overflow"); > >> break; > >> }; > >> > >> # > >> ----------------------------------------------------------------- > >> # Record Route Section > >> # > >> ----------------------------------------------------------------- > >> if (method!="REGISTER") { > >> record_route(); > >> }; > >> > >> # > >> ----------------------------------------------------------------- > >> # Loose Route Section > >> # > >> ----------------------------------------------------------------- > >> if (loose_route()) { > >> route(1); > >> break; > >> }; > >> > >> # > >> ----------------------------------------------------------------- > >> # Call Type Processing Section > >> # > >> ----------------------------------------------------------------- > >> if (uri!=myself) { > >> route(1); > >> break; > >> }; > >> > >> if (method=="ACK") { > >> route(1); > >> break; > >> } if (method=="INVITE") { > >> route(3); > >> break; > >> } else if (method=="REGISTER") { > >> route(2); > >> break; > >> }; > >> > >> lookup("aliases"); > >> > >> if (uri!=myself) { > >> route(1); > >> break; > >> }; > >> > >> if (!lookup("location")) { > >> sl_send_reply("404", "User Not Found"); > >> break; > >> }; > >> > >> route(1); > >> } > >> > >> route[1] { > >> > >> # > >> ----------------------------------------------------------------- > >> # Default Message Handler > >> # > >> ----------------------------------------------------------------- > >> if (!t_relay()) { > >> sl_reply_error(); > >> }; > >> } > >> > >> route[2] { > >> > >> # > >> ----------------------------------------------------------------- > >> # REGISTER Message Handler > >> # > >> ---------------------------------------------------------------- > >> sl_send_reply("100", "Trying"); > >> > >> if (!www_authorize("localhost","subscriber")) { > >> www_challenge("localhost","0"); > >> break; > >> }; > >> > >> if (!check_to()) { > >> sl_send_reply("401", "Unauthorized"); > >> break; > >> }; > >> > >> consume_credentials(); > >> > >> if (!save("location")) { > >> sl_reply_error(); > >> }; > >> } > >> > >> route[3] { > >> # > >> ----------------------------------------------------------------- > >> # INVITE Message Handler > >> # > >> ----------------------------------------------------------------- > >> if (!proxy_authorize("localhost","subscriber")) { > >> proxy_challenge("localhost","0"); > >> break; > >> } else if (!check_from()) { > >> sl_send_reply("403", "Use From=ID"); > >> break; > >> }; > >> > >> consume_credentials(); > >> > >> lookup("aliases"); > >> if (uri!=myself) { > >> route(1); > >> break; > >> }; > >> > >> #if (!lookup("location")) { > >> # sl_send_reply("404", "User Not Found"); > >> # break; > >> #}; > >> > >> route(1); > >> } > >> > >> > >> > >> SoftPhone LOG: > >> > >> 17:04:43.1 > >> SENDING TO: 10.110.0.127:5060 > >> INVITE sip:313812@sipserver.es SIP/2.0 > >> To: <sip:313812@sipserver.es> > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-366872507-1--d87543-;rport > >> Call-ID: fc7b726c6545d126 > >> CSeq: 1 INVITE > >> Contact: <sip:313813@172.25.97.138:9528> > >> Max-Forwards: 70 > >> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, > >> SUBSCRIBE, > >> INFO > >> Content-Type: application/sdp > >> User-Agent: eyeBeam release 3004t stamp 16741 > >> Content-Length: 274 > >> > >> v=0 > >> o=- 32759240 32759303 IN IP4 172.25.97.138 > >> s=eyeBeam > >> c=IN IP4 172.25.97.138 > >> t=0 0 > >> m=audio 7262 RTP/AVP 100 6 0 8 3 18 5 101 > >> a=alt:1 1 : 8013E837 DD8642E8 172.25.97.138 7262 > >> a=fmtp:101 0-15 > >> a=rtpmap:100 speex/16000 > >> a=rtpmap:101 telephone-event/8000 > >> a=sendrecv > >> > >> 17:04:43.1 > >> RECEIVING FROM: 10.110.0.127:5060 > >> SIP/2.0 407 Proxy Authentication Required > >> To: > >> <sip:313812@sipserver.es>;tag=ae8ae6963bd737be6ef2befd1ceaf249.3909 > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-366872507-1--d87543-;rport=9528 > >> Call-ID: fc7b726c6545d126 > >> CSeq: 1 INVITE > >> Proxy-Authenticate: Digest realm="localhost", > >> nonce="44f307373cf9fb29da3028442e23f976513fc91d" > >> Server: Sip EXpress router (0.9.6 (i386/linux)) > >> Content-Length: 0 > >> Warning: 392 10.110.0.127:5060 "Noisy feedback tells: pid=7865 > >> req_src_ip=172.25.97.138 req_src_port=9528 > >> in_uri=sip:313812@sipserver.es > >> out_uri=sip:313812@sipserver.es via_cnt==1" > >> > >> > >> 17:04:43.1 > >> SENDING TO: 10.110.0.127:5060 > >> ACK sip:313812@sipserver.es SIP/2.0 > >> To: > >> <sip:313812@sipserver.es>;tag=ae8ae6963bd737be6ef2befd1ceaf249.3909 > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-366872507-1--d87543-;rport > >> Call-ID: fc7b726c6545d126 > >> CSeq: 1 ACK > >> Content-Length: 0 > >> > >> > >> 17:04:43.1 > >> SENDING TO: 10.110.0.127:5060 > >> INVITE sip:313812@sipserver.es SIP/2.0 > >> To: <sip:313812@sipserver.es> > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-736589046-1--d87543-;rport > >> Call-ID: fc7b726c6545d126 > >> CSeq: 2 INVITE > >> Contact: <sip:313813@172.25.97.138:9528> > >> Max-Forwards: 70 > >> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, > >> SUBSCRIBE, > >> INFO > >> Content-Type: application/sdp > >> Proxy-Authorization: Digest > >> username="313813",realm="localhost",nonce="44f307373cf9fb29da3028442e23f976513fc91d",uri="sip:313812@sipserver.es",response="bfd77c8cdc1066487b170b19e1e0fe61",algorithm=MD5 > >> > >> User-Agent: eyeBeam release 3004t stamp 16741 > >> Content-Length: 274 > >> > >> v=0 > >> o=- 32759240 32759303 IN IP4 172.25.97.138 > >> s=eyeBeam > >> c=IN IP4 172.25.97.138 > >> t=0 0 > >> m=audio 7262 RTP/AVP 100 6 0 8 3 18 5 101 > >> a=alt:1 1 : 8013E837 DD8642E8 172.25.97.138 7262 > >> a=fmtp:101 0-15 > >> a=rtpmap:100 speex/16000 > >> a=rtpmap:101 telephone-event/8000 > >> a=sendrecv > >> > >> 17:04:43.1 > >> RECEIVING FROM: 10.110.0.127:5060 > >> SIP/2.0 100 trying -- your call is important to us > >> To: <sip:313812@sipserver.es> > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-736589046-1--d87543-;rport=9528 > >> Call-ID: fc7b726c6545d126 > >> CSeq: 2 INVITE > >> Server: Sip EXpress router (0.9.6 (i386/linux)) > >> Content-Length: 0 > >> Warning: 392 10.110.0.127:5060 "Noisy feedback tells: pid=7865 > >> req_src_ip=172.25.97.138 req_src_port=9528 > >> in_uri=sip:313812@sipserver.es > >> out_uri=sip:313812@sipserver.es via_cnt==1" > >> > >> > >> 17:04:43.1 > >> RECEIVING FROM: 10.110.0.127:5060 > >> SIP/2.0 407 Proxy Authentication Required > >> To: > >> <sip:313812@sipserver.es>;tag=ae8ae6963bd737be6ef2befd1ceaf249.fcd1 > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-736589046-1--d87543-;rport=9528 > >> Call-ID: fc7b726c6545d126 > >> CSeq: 2 INVITE > >> Proxy-Authenticate: Digest realm="localhost", > >> nonce="44f307373cf9fb29da3028442e23f976513fc91d" > >> Server: Sip EXpress router (0.9.6 (i386/linux)) > >> Content-Length: 0 > >> Warning: 392 10.110.0.127:5060 "Noisy feedback tells: pid=7865 > >> req_src_ip=10.110.0.127 req_src_port=5060 in_uri=sip:313812@sipserver.es > >> out_uri=sip:313812@sipserver.es via_cnt==2" > >> > >> > >> 17:04:43.1 > >> SENDING TO: 10.110.0.127:5060 > >> ACK sip:313812@sipserver.es SIP/2.0 > >> To: > >> <sip:313812@sipserver.es>;tag=ae8ae6963bd737be6ef2befd1ceaf249.fcd1 > >> From: Joe<sip:313813@sipserver.es>;tag=52710612 > >> Via: SIP/2.0/UDP > >> 172.25.97.138:9528;branch=z9hG4bK-d87543-736589046-1--d87543-;rport > >> Call-ID: fc7b726c6545d126 > >> CSeq: 2 ACK > >> Content-Length: 0 > >> > >> > >> 17:04:43.2 Call (l:'Joe' r:'sip:313812@sipserver.es') - Call being > >> terminated. Reasons: "Proxy Authentication Required", (code: 407) > >> > >> > >> _______________________________________________ > >> Serusers mailing list > >> Serusers(a)lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > >> > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > Hi Andrey > > I think tha tihs part of log is correct: > > Proxy-Authorization: Digest > username="313813",realm="localhost",nonce="44f307373cf9fb29da3028442e23f976513fc91d",uri="sip:313812@sipserver.es",response="bfd77c8cdc1066487b170b19e1e0fe61",algorithm=MD5 > > > The username is the caller id and the uri is de destination number. My > SJphone configuration is simply: The user, pass and account name are > 313813. I attach my mysql subscriber table: > > > mysql> select * from subscriber where username=313814; > +----------------------------------+----------+----------------------+----------+------------+-----------+-------+-------------------+---------------------+---------------------+--------------+------+------------------+----------+----------------------------------+----------------------------------+------------+----------+------+------+------+ > | phplib_id | username | domain | > password | first_name | last_name | phone | email_address | > datetime_created | datetime_modified | confirmation | flag | > sendnotification | greeting | ha1 | > ha1b | allow_find | timezone | rpid | domn | > uuid | > +----------------------------------+----------+----------------------+----------+------------+-----------+-------+-------------------+---------------------+---------------------+--------------+------+------------------+----------+----------------------------------+----------------------------------+------------+----------+------+------+------+ > | 3fbf3938ba07fa0f280ffe44926e4cd3 | 313814 | sipserver.es | 313814 > | | | | joe(a)plcendesa.com | 2006-08-28 > 18:23:22 | 0000-00-00 00:00:00 | | o | > | | 3fbf3938ba07fa0f280ffe44926e4cd3 | > 147098ce3cd77298d89982cd37b5813a | 0 | NULL | NULL | NULL | > NULL | > +----------------------------------+----------+----------------------+----------+------------+-----------+-------+-------------------+---------------------+---------------------+--------------+------+------------------+----------+----------------------------------+----------------------------------+------------+----------+------+------+------+ > 1 row in set (0.00 sec) > > > and my uri table: > > mysql> select * from uri; > +----------+----------------------+----------+---------------------+ > | username | domain | uri_user | last_modified | > +----------+----------------------+----------+---------------------+ > | 313813 | sipserver.createc.es | 313813 | 2006-08-28 17:52:48 | > | 313814 | sipserver.createc.es | 313814 | 2006-08-28 18:23:22 | > +----------+----------------------+----------+---------------------+ > 2 rows in set (0.00 sec) > > > With the X-Lite softphone the same thing happens. > > Thanks in advace! > Regards > Joe >

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users