sr-users

sr-users@lists.kamailio.org

20 participants
37491 discussions

FW: [Users] Two c= tags in sdp body
by Pletli Antal 04 Aug '06

04 Aug '06

Sorry, i ran the older version of openser not the new. :-) thx -----Original Message----- From: Pletli Antal Sent: Friday, August 04, 2006 8:45 AM To: users(a)openser.org Subject: RE: [Users] Two c= tags in sdp body Hi, It doesn't work, with the 'c' flag all the c= tags remain unchanged. -----Original Message----- From: Ovidiu Sas [mailto:sip.nslu@gmail.com] Sent: Thursday, August 03, 2006 5:00 PM To: Pletli Antal Cc: users(a)openser.org Subject: Re: [Users] Two c= tag in sdp body Check … [View More]

1 0

RE: [Users] Two c= tags in sdp body
by Pletli Antal 04 Aug '06

04 Aug '06

Hi, It doesn't work, with the 'c' flag all the c= tags remain unchanged. -----Original Message----- From: Ovidiu Sas [mailto:sip.nslu@gmail.com] Sent: Thursday, August 03, 2006 5:00 PM To: Pletli Antal Cc: users(a)openser.org Subject: Re: [Users] Two c= tag in sdp body Check the new 'c' flag in 1.1 release: http://www.openser.org/docs/modules/1.1.x/nathelper.html#AEN275 -ovi On 8/3/06, Pletli Antal <a.pletli(a)euromacc.hu> wrote: > > > > Hello, > > I use OpenSer … [View More]

1 0

[Users] Hello see it.. plz
by raviprakash sunkara 04 Aug '06

04 Aug '06

Hi USERS, Happy FriendShip Day on this Sunday ,, in Advance................... -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology Kondapur, Hi-tech city, Hyderabad. www.hyperion-tech.com +91-9985077535

1 0

[Users] I can`t add new user by using "openserctl add". Please help me....Please
by Ferianto siregar 04 Aug '06

04 Aug '06

Dear all, Now, I try to test my openser configuration by using xlite. I tried to call from client to test the openser configuration that I have built, can work sucessfully. So, I must create a new user by using "openserctl add" command. But when i tried to do that, I got an error message. The error message said that " WARINIG: no database engine found - tried '' This command requires a database engine - none was loaded". I think this message said that I can not add a new … [View More]

3 2

FW: [Serusers] accounting for prefixed number
by Richard C. Thompson 03 Aug '06

03 Aug '06

Yes you can. We use prefix and strip to add and subtract prefixes before t_relay Rick -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Nhadie Sent: Wednesday, August 02, 2006 9:43 AM To: serusers(a)iptel.org Subject: [Serusers] accounting for prefixed number Hi All, I have a client using an asterisk server for them to use my sip proxy, what I did was add a trunk on their asteriks with a local extension from my SER … [View More]

1 0

[Serusers] SER local as an Asterisk Trunk
by Nhadie Ramos 03 Aug '06

03 Aug '06

Hi, Would just like to ask, I have an SER SIP Proxy and I setup an Asterisk, i used an SER local as a trunk for the Asterisk. When the Asterisk box register to SER it will have this URI sip:s@10.10.10.10, instead of sip:1001@10.10.10.10. Anyone has encountered this problem? Because I'm checking the From part, and "s" is not a valid extension number so it will deny it calling to the gateway. TIA Regards Nhadie

3 2

[Users] Errors when loading ACC
by Bruno Machado 03 Aug '06

03 Aug '06

Hi fellows Im trying to install Openser 1.0.1 in other server but it doenst running at all. It is the error: 0(24823) set_mod_param_regex: parameter <radius_config> not found in module <acc> 0(24823) parse error (130,19-20): Can't set module parameter 0(24823) set_mod_param_regex: parameter <service_type> not found in module <acc> 0(24823) parse error (131,20-21): Can't set module parameter 0(24823) set_mod_param_regex: parameter <radius_flag> not found in … [View More]

2 1

[Serusers] registered UA's
by Richard C. Thompson 03 Aug '06

03 Aug '06

Hi All I hope someone can help me figure this out. We've had a ser server running for quite some time now on a Dell 2850 with dual cpu's. The load is very low due to the use of multiple mediaproxy servers to handle the RTP streams. We have about 2300 UID in the mysql database but at any given time only about 1300 show as registered in the location table and we have customers complaining about not receiving calls. When tech support has a customer power cycle their ATA, it registers just fine … [View More]

2 1

[Users] Two c= tag in sdp body
by Pletli Antal 03 Aug '06

03 Aug '06

Hello, I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3. When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN IPV4" tags in sdp body with the same IP address. The nathelper module only replaces the last occurence of c= tag so some SIP clients works wrong because those get the first IP from the first "c=" tag... How can i replace the all occurences of "c=" tag in sdp body with the help of nathelper? Thx, Antal Content-Type: application/sdp. Content-Length: 277. . v=… [View More]

2 1

[Users] siptrace doc inconsistency
by Andreas Granig 03 Aug '06

03 Aug '06

Hi, The docs of the siptrace module of v1.1.0,refer to the function "siptrace()", where in fact it is defined as "sip_trace()" in the source. Cheers, Andy

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users