sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

Re: [Serusers] Problem starting SER 0.9.6 with MYSQL on FreeBSD
by Josel Layno 26 Jul '06

26 Jul '06

Hi there again....I think i got fix some syntax error...typo errors...:) But not this new error...:( voip# ser start 0(1684) ERROR: load_module: could not open module </usr/local/lib/ser/modules/nathelpher.so>: Cannot open "/usr/local/lib/ser/modules/nathelpher.so" 0(1684) parse error (50,13-14): failed to load module 0(1684) set_mod_param_regex: No module matching nathelpher found | 0(1684) parse error (72,19-20): Can't set module parameter 0(1684) set_mod_param_regex: No module matching nathelpher found | 0(1684) parse error (73,19-20): Can't set module parameter 0(1684) parse error (124,48-49): unknown command, missing loadmodule? 0(1684) parse error (216,22-23): unknown command, missing loadmodule? 0(1684) parse error (242,21-22): unknown command, missing loadmodule? ERROR: bad config file (6 errors) I have here my module directory...seems the nathelpher.so is included...*thinking* voip# pwd /usr/local/lib/ser/modules voip# ls -al total 1388 drwxr-xr-x 2 root wheel 1024 Jul 24 13:30 . drwxr-xr-x 3 root wheel 512 Jul 24 13:30 .. -r-xr-xr-x 1 root wheel 14584 Jul 24 13:30 acc.so -r-xr-xr-x 1 root wheel 23708 Jul 24 13:30 auth.so -r-xr-xr-x 1 root wheel 22512 Jul 24 13:30 auth_db.so -r-xr-xr-x 1 root wheel 37176 Jul 24 13:30 auth_diameter.so -r-xr-xr-x 1 root wheel 18096 Jul 24 13:30 auth_radius.so -r-xr-xr-x 1 root wheel 9816 Jul 24 13:30 avp.so -r-xr-xr-x 1 root wheel 9860 Jul 24 13:30 avp_db.so -r-xr-xr-x 1 root wheel 11524 Jul 24 13:30 avp_radius.so -r-xr-xr-x 1 root wheel 51700 Jul 24 13:30 avpops.so -r-xr-xr-x 1 root wheel 8228 Jul 24 13:30 check_ua.so -r-xr-xr-x 1 root wheel 48316 Jul 24 13:30 dbtext.so -r-xr-xr-x 1 root wheel 14188 Jul 24 13:30 dispatcher.so -r-xr-xr-x 1 root wheel 5824 Jul 24 13:30 diversion.so -r-xr-xr-x 1 root wheel 15832 Jul 24 13:30 domain.so -r-xr-xr-x 1 root wheel 14348 Jul 24 13:30 enum.so -r-xr-xr-x 1 root wheel 22292 Jul 24 13:30 exec.so -r-xr-xr-x 1 root wheel 13960 Jul 24 13:30 ext.so -r-xr-xr-x 1 root wheel 14184 Jul 24 13:30 flatstore.so -r-xr-xr-x 1 root wheel 7224 Jul 24 13:30 gflags.so -r-xr-xr-x 1 root wheel 10248 Jul 24 13:30 group.so -r-xr-xr-x 1 root wheel 11080 Jul 24 13:30 group_radius.so -r-xr-xr-x 1 root wheel 28012 Jul 24 13:30 mangler.so -r-xr-xr-x 1 root wheel 9748 Jul 24 13:30 maxfwd.so -r-xr-xr-x 1 root wheel 39844 Jul 24 13:30 mediaproxy.so -r-xr-xr-x 1 root wheel 30736 Jul 24 13:30 msilo.so -r-xr-xr-x 1 root wheel 33180 Jul 24 13:30 mysql.so -r-xr-xr-x 1 root wheel 72724 Jul 24 13:30 nathelper.so -r-xr-xr-x 1 root wheel 7508 Jul 24 13:30 options.so -r-xr-xr-x 1 root wheel 114452 Jul 24 13:30 pa.so -r-xr-xr-x 1 root wheel 21384 Jul 24 13:30 pdt.so -r-xr-xr-x 1 root wheel 43268 Jul 24 13:30 permissions.so -r-xr-xr-x 1 root wheel 22776 Jul 24 13:30 pike.so -r-xr-xr-x 1 root wheel 32520 Jul 24 13:30 postgres.so -r-xr-xr-x 1 root wheel 3960 Jul 24 13:30 print.so -r-xr-xr-x 1 root wheel 27688 Jul 24 13:30 registrar.so -r-xr-xr-x 1 root wheel 22980 Jul 24 13:30 rr.so -r-xr-xr-x 1 root wheel 15344 Jul 24 13:30 sl.so -r-xr-xr-x 1 root wheel 72068 Jul 24 13:30 sms.so -r-xr-xr-x 1 root wheel 9928 Jul 24 13:30 speeddial.so -r-xr-xr-x 1 root wheel 14076 Jul 24 13:30 textops.so -r-xr-xr-x 1 root wheel 213548 Jul 24 13:30 tm.so -r-xr-xr-x 1 root wheel 10784 Jul 24 13:30 uri.so -r-xr-xr-x 1 root wheel 12968 Jul 24 13:30 uri_db.so -r-xr-xr-x 1 root wheel 8648 Jul 24 13:30 uri_radius.so -r-xr-xr-x 1 root wheel 69340 Jul 24 13:30 usrloc.so -r-xr-xr-x 1 root wheel 19976 Jul 24 13:30 xlog.so Is there something to do with ownership/permission..etc? Mediaproxy is runnig on boot. Btw, i did install SER 0.9.6 using FreeBSD ports. I hope u can help me with this. tia. cheers, josel On 7/24/06, openser(a)comcast.net <openser(a)comcast.net> wrote: > > Is mysqld started, if not the way to start it in Fedora 4 is /sbin/service > mysqld start > > -------------- Original message ---------------------- > From: "Josel Layno" <josel70ph(a)gmail.com> > > > > > > > > > > > > > I got to install SER 0.9.6 with Mysql on FreeBSD. But i got some parse > > error. > > How can i trace to find the error on my config file? > > > > voip# ser start > > 0(940) parse error (163,25-35): syntax error > > 0(940) parse error (163,101-102): bad arguments > > 0(940) parse error (174,10-11): syntax error > > 0(940) parse error (174,10-11): invalid operator, == , != or =~ > expected > > ERROR: bad config file (4 errors) > > > > Sorry for my ignorance...what's the relevance of (163,25-35) in ser.cfg? > > > > > > cheers, > > > > josel > > > > > > > ---------- Forwarded message ---------- > From: "Josel Layno" <josel70ph(a)gmail.com> > To: serusers(a)lists.iptel.org > Date: Mon, 24 Jul 2006 18:48:14 +0000 > Subject: [Serusers] Problem starting SER 0.9.6 with MYSQL on FreeBSD > > > > > > > I got to install SER 0.9.6 with Mysql on FreeBSD. But i got some parse > error. > How can i trace to find the error on my config file? > > voip# ser start > 0(940) parse error (163,25-35): syntax error > 0(940) parse error (163,101-102): bad arguments > 0(940) parse error (174,10-11): syntax error > 0(940) parse error (174,10-11): invalid operator, == , != or =~ expected > ERROR: bad config file (4 errors) > > Sorry for my ignorance...what's the relevance of (163,25-35) in ser.cfg? > > > cheers, > > josel > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > >

2 3

RE: [Serusers] SER/MediaProxy Audio issues - NEED HELP
by Marc Rys 26 Jul '06

26 Jul '06

Hi Ali, Yes the ATA can register with no problems. Still one way audio. I also setup a cisco 7960 phone behind NAT as well, and it’s having the same one way audio problem. Thanks again. marc _____ From: Ali Zaidi [mailto:aligzaidi@gmail.com] Sent: Monday, July 24, 2006 7:50 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, you don't have to configure rtp on ATA since everything handled by mediaproxy. You just have to makesure that your ATA can register, using correct proxy server, port 5060, credentials, everything else set to factory default. let meknow. Note: Set your ATA to factory default, try to register with SER using username, password, domain and port 5060. EVERYTHING SHOULD BE FACTORY DEFAULT. LET ME KNOW, ALI.... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com"m.rys(a)rystec.com> wrote: I just tried all of that.. Still no luck. I even made sure the UA's were using ports 10000 and higher. Any other suggestions? marc _____ From: Ali Zaidi [mailto: HYPERLINK "mailto:aligzaidi@gmail.com" \naligzaidi(a)gmail.com] Sent: Monday, July 24, 2006 4:56 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Ok, try restarting ser + MySQL + MediaProxy then reregister your both ATA. let me know, Ali On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@ivalve.net" \n m.rys(a)ivalve.net> wrote: Ali, Thank you for helping. I've changed my mediaproxy.ini file to the following. But the one way audio is still happening. Marc ----------------------------------------------------------- Mediaproxy.ini ----------------------------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = HYPERLINK "http://12.178.142.235/" \n12.178.142.235 # This is where OpenSER installed portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc ________________________________________ From: Ali Zaidi [mailto:HYPERLINK "mailto:aligzaidi@gmail.com" \n aligzaidi(a)gmail.com] Sent: Monday, July 24, 2006 4:40 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Mediaproxy.ini has not RTP ports declare. ;portRange = 2000:8000 # These values are set same in ATA's configs <- 2000:8000 range conflict with 5060. Try following, portRange = 10000:10100 then restart mediaproxy. Let me know if you still have problem, i can help further. Ali... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com" \n m.rys(a)rystec.com> wrote: Hello All, I'm fairly new to SER / Mediaproxy.I've been following the examples from HYPERLINK "http://onsip.org/" \nonsip.org using the latest Getting started docs. At this point I'm testing with two Grandstream Handytone 486 UA' s.One NAT'd, one not. Please check out the following URL to see a diagram explaining my setup. HYPERLINK "http://marc.ivalve.net/ser/gif_1.gif" \nhttp://marc.ivalve.net/ser/gif_1.gif "UA-2" cannot hear anything spoken from "UA-1", although I can hear what is said from "UA-2" on "UA-1", but not vice versa.2-way voice is not happening. Both UA's do register to SER.The NAT'd UA couldn't register until I got Mediaproxy installed.Mediaproxy does appear to start with out errors. Below are my Ser.cfg and Mediaproxy.ini. Please Help. Marc Ser.cfg -------------------------------------------------------------- #5a-mysql-mediaproxy-ser.cfg debug=3 fork=yes log_stderror=no listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { #----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------ mediaproxy.ini ------------------------------------------------------------ [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed ;portRange = 2000:8000# These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org" \nSerusers(a)lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers" \nhttp://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org"Serusers(a)lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers" \nhttp://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

2 3

[Serusers] serweb ul_replication?
by O'Shaughnessy Evans 25 Jul '06

25 Jul '06

Hello, all. I'm trying to find a good way to copy usrloc registrations entered into ser via the FIFO from 1 system to another. I came across the ul_replication setting in serweb's config.php, but it was taken out of CVS back in April. Was this a feature that was going to be added but never came to fruition? My best idea so far is to use sipsak to send a REGISTER message to each ser peer, but that also seems like a bit of a kludge to me so I'm still looking for a more "native" way to do it. From what I've read, the XML-RPC subsystem will give us that kind of ability in the future, but I gather that's still in development. The other option seems to be to hack usrloc with another db_mode that never uses the cache and always checks the db. If you're replicating your ser database between proxies, registration on 1 system will thus produce a registration on all the others. It looks like openser has that feature now but I couldn't find it in the CVS branches of ser, though I read in a report somewhere that it had been added. Does anyone have any experience with this situation that they'd like to share? Any elegant solutions out there? Thanks! I appreciate hearing anything you folks would be willing to share. -- = o'shaughnessy_evans -=- sys_admin @ (aloha|ilhawaii|myworld|turquoise).net = Pacific LightNet, Inc.

1 0

[Serusers] ping
by Marc Rys 25 Jul '06

25 Jul '06

ping -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

1 0

[Users] Locally generated single-hop ACKs with Route headers
by Augustin, Andrew (external) 25 Jul '06

25 Jul '06

Hello, I am using OpenSER v1.0.1 I am currently testing with proxies running OpenSER. I have a problem with ACK messages generated and routed for scenarios where an inititiated call session fails to establish between A and B parties e.g. Unsuccessful No Answer, Unsuccessful Busy. The ACK messages are single hop locally generated responses to the sip error message e.g. '487 Request Terminated', '486 Busy'. The behaviour I observe is that Route headers are 'remembered' from the initiating INVITE message and inserted into the ACK messages automatically generated by OpenSER. This extra Route header causes problems with routing and the generation unwanted messages (error message resends) in addition to expeceted scenario call-flow. It is also visible at the B-Party. I would like to either prevent the creation of, or remove this Route header. I have tried to remove this header using the OpenSER available methods, but this has failed. I have noticed that the known issue described in the document: SIP Express Router v0.8.8 - Developer's Guide under section: 9.6.4 Known Issues appears to describe this problem. "local ACK/CANCELs copy'n'pastes Route and ignores deleted Routes" Has this issue been resolved? If so, from what version of OpenSER? If it has not been resolved, is there a way to resolve or workaround this problem? Best regards, Andrew Augustin

2 1

RE: [Serusers] decoding g729 encoded rtp streams
by İlker Aktuna (Koç.net) 25 Jul '06

25 Jul '06

Hi, Thanks for the detailed explanation. It's really useful. I'm trying to automate this whole process. All tools except Ethereal (tcpdump, rtpdump, voiceage decoder) are command line tools that can be used in a batch/shell script. How can I export rtp stream without using Ethereal, or from command line ? is there a way ? Thanks, ilker -----Original Message----- From: Andres [mailto:andres@telesip.net] Sent: Monday, July 24, 2006 8:18 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)iptel.org Subject: Re: [Serusers] decoding g729 encoded rtp streams İlker Aktuna (Koç.net) wrote: > Hi, > > Thanks for the information. > Actually, I downloaded it but couldn't find how to export rtp payload. > Does rtpdump read capture files recorded with Ethereal/tcpdump ? > (in which format should I save the file?) > > Btw, there is a Windows sniffer named "Cain & Abel" this one decodes g729. > > Thanks, > ilker > First you export the RTP data from within Ethereal like this: 1. Open Capture 2. Click on Analyze->Statistics->RTP Streams->Show All 3. Select the stream you want to export 4. Click 'Save As' 5. Then feed that file into rtpdump like the below example 'trace.rtp'. Here is the command line: rtpdump -F payload -f trace.rtp -o file.out file.out will contain just the payload which can then be decoded. > > > -----Original Message----- > From: Andres [mailto:andres@telesip.net] > Sent: Friday, July 21, 2006 10:53 PM > To: İlker Aktuna (Koç.net) > Cc: serusers(a)iptel.org > Subject: Re: [Serusers] decoding g729 encoded rtp streams > > İlker Aktuna (Koç.net) wrote: > > > Hi, > > > > I know that there are licence and patent issues but is it possible > > to decode g729 encoded rtp streams with any software ? > > I have licenced Eybeam softphone with g729 support. But it can only > > decode streams in a conversation. > > I just need to decode streams recorded with tcpdump/ethereal. > > > > Once I had used a software with this feature but then it turned out > > to be a trojan. I don't remember the name now. > > Is there any other software ? (or method using Eyebeam ?) > > > > Thanks, > > ilker > > You can download the decoder from: > http://www.voiceage.com/openinit_g729.php > > Then capture the RTP Stream with Ethereal and export the Payload > (using rtpdump from http://www.cs.columbia.edu/IRT/software/rtptools/). > > You can then decode it with the above software. > > _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] transcation lifetime
by Klaus Darilion 25 Jul '06

25 Jul '06

Hi! Some questions regarding tm: How long does statefull transactions live inside openser? Is it correct that wt_timer is the timeout for completed transactions, and fr_inv_timer/fr_timer is for incomplete transactions? What is a complete transaction in case of INVITE? With or without ACK? openserctl shows 44 transactions although the box is idle since long time: tm:inuse_transactions = 044 Are there really 44 transaction open or what does 044 mean? How much memory does a transaction approximately need (no AVPs)? thanks klaus

1 1

[Serusers] Cisco like translation rules in SER.
by Robert Zorop 25 Jul '06

25 Jul '06

Hi guys. I'd like to hear about different methods of implementing cisco like transtation rules in SER. I was thinking about AVPs, but still couldn't find the ight way. Is someone is doing it inside or outside ser, please shed a light on this!. What i need is to stip some numbers, and then add some other (variables) before proxying the calls. Thanks in advance.

1 0

[Users] How openser identify BYE within a DIALOG
by tele 25 Jul '06

25 Jul '06

Hi all, I want to know how OpenSER is able to identify the BYE that match a dialog. what are the essential header needed for the BYE message? I try to understand how work the acc module and what are the header needed in the BYE for generate accounting. My goal as i have wrote is to send a fake BYE to OpenSER and do accounting. In my test OpenSER correctly parse fake BYE and try to send the BYE to the UA, but don't send accounting info maybe i missing something essential for send acct. My fake BYE have: Via, Record-Route with ftag, To to-tag, From from-tag, Call-ID. i miss only the correct CSeq but i insert a custom CSeq like 9999. Any hints pls? :tele

3 6

Re: [Users] INVITE Direction
by Klaus Darilion 25 Jul '06

25 Jul '06

Kelvin Williams wrote: > Can anyone advise on the easiest way to know from which direction an > INVITE is coming (ie. From my user to the world, or >From the world to > my user)? in case of multidmoain support: if (is_from_local()) ... http://www.openser.org/docs/modules/1.1.x/domain.html#AEN87 or in case of a single domain you can use from_uri http://openser.org/dokuwiki/doku.php?id=openser_v1.1.0_core_cookbook#from_u… regards klaus regards klaus > > > Thanks in advance. > > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users