sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

[Users] is OpenSER for me?
by Saeed Tariq 28 Jun '06

28 Jun '06

Hi, 1. I have few questions, I am using Cisco gateways to terminate and originate calls, Can I do the same with openSER? 2. I've installed openser 1.0.1 where with Mysql support, where can I do the configuration like routing etc. 3. From where I can get Web interface for openser 1.0.1 Thanks Best Regards.

2 1

[Users] more on accounting
by tele 28 Jun '06

28 Jun '06

Hi all, I'm using OpenSER v1.0.1 and i have done an accounting compatible with my billing system. Now i have problem with detection of flow direction for billing reason. i'm talking about openser 1.0.x: the problem is when the BYE come from callee. i know the problem is solved in openser1.1.x with the modparam("acc", "detect_direction", 1) i have read in modules documentation of 1.0.x that i can use is_direction() of RR module for detect call flow direction but it says that this must be called after loose_route() so for the accounting i must call setflag before loose_route() but what can i do if i want detect call flow before of exec setflag? Hmmm i think that i must install OpenSER 1.1.x and test with it :tele

1 1

[Users] Multiple Sockets + Multiple Processors: Any known issues?
by Carsten Bock 28 Jun '06

28 Jun '06

Hi Everybody, I have some problems with a System which has several network interfaces and multiple network interfaces. The system basically receives requests on the public socket/ip and sends them, via the private socket to some proxies, which "do the work". It's a kind of load-balancer based on OpenSER 1.0.1 and the Dispatcher Module from 1.1 / CVS. Everything works fine, but sometimes i see some ICMP Messages (Destination not reachable / Port not reachable) on this "loadbalancer"; as a response to requests from the Proxies to the loadbalancer. Has anybody seen this issue before? Any ideas, what's wrong? Any known issues? Are there any known problems with multiple interfaces? Any known issues with more than one processor? I've copied my configuration below, any thing in capital letters are Parameters from my M4 file... The system is not really on high load, has 64 children and should easily handle the load... (Dual Intel Xeon(a)2.80GHz, 1 Gig of Ram) Any help would be appreciated... Thanks in advance, Carsten debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=CHILD_PROCS check_via=yes dns=off rev_dns=off listen=DISPATCHER_EXTERNAL_IP listen=DISPATCHER_INTERNAL_IP port=5060 sip_warning=0 disable_core_dump=yes # Use the FIFO fifo="/tmp/openser_fifo" # for more info: sip_router -h # ------------------ module loading ---------------------------------- loadmodule "/lib/openser/modules/maxfwd.so" loadmodule "/lib/openser/modules/sl.so" loadmodule "/lib/openser/modules/tm.so" loadmodule "/lib/openser/modules/xlog.so" loadmodule "/lib/openser/modules/dispatcher.so" loadmodule "/lib/openser/modules/textops.so" loadmodule "/lib/openser/modules/rr.so" loadmodule "/lib/openser/modules/mccs_dispatcher.so" # ----------------- setting module-specific parameters --------------- # TM Module: Timeout for a request with no provisional Answers modparam("tm", "fr_timer", PROXY_TIMEOUT) # No double Record-Route; we do it manually modparam("rr", "enable_double_rr", 0) # Dispatcher: Forward Register Requests modparam("dispatcher", "list_file", "/etc/openser/dispatcher.list") # Dispatcher: Enable Failover-Support modparam("dispatcher", "flags", 2) route { ################################################################################################################## # ï¿1/2berprï¿1/2fung auf zuviele Forwards. ############################################################################################################### if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","To Many Hops"); drop(); return; }; ################################################################################################################## # Loose-Routing (RFC3261) ############################################################################################################### # Record-Route-Header entfernen if (loose_route()) { if(uri=~"sip:.*[@]INTERNAL_IP_REGEX") { # Send via the internal Interface: force_send_socket(DISPATCHER_INTERNAL_IP:5060); } else { # Send via the external Interface: force_send_socket(DISPATCHER_EXTERNAL_IP:5060); } if (!t_relay()) { sl_reply_error(); } return; } ################################################################################################################## # Record-Route, damit alle Nachrichten ï¿1/2ber diesen SIP-Proxy laufen ############################################################################################################### if (method == "INVITE") record_route(); ################################################################################################################## # Relay requests from the Gateways ############################################################################################################### if (OTHER_PROXY_QUERY) { if (uri != myself) { # Send via the external Interface: force_send_socket(DISPATCHER_EXTERNAL_IP:5060); # Und das Paket entsprechend weiterleiten if (!t_relay_to_udp("MCCS_GLOBAL_DISPATCHER_PRIMARY", "MCCS_GLOBAL_DISPATCHER_PRIMARY_PORT")) { log(1, "Not possible to relay to Dispatcher\n"); # Fehler melden sl_reply_error(); } return; } else { # Anfrage fï¿1/2r ein PSTN-Out-Gateway if (uri=~"sip:mg_out_.*") { # "mg_out_" entfernen strip(7); # PSTN-Out Mediagateway wï¿1/2hlen (Round-Robin) ds_select_domain("2", "4"); # Send via the external Interface: force_send_socket(DISPATCHER_EXTERNAL_IP:5060); # Anfrage fï¿1/2r einen Mediaserver } else if (uri=~"sip:media_.*") { # "media_" entfernen strip(6); # Mediaserver wï¿1/2hlen (Round-Robin) ds_select_domain("3", "4"); # Send via the internal Interface: force_send_socket(DISPATCHER_INTERNAL_IP:5060); } else { sl_send_reply("503", "Service not available"); drop(); return; } # On Failure: Choose next Proxy t_on_failure("1"); # Relay to the Proxy if (!t_relay()) { sl_reply_error(); } return; } } ################################################################################################################## # Routing zu den SIP-Proxys ############################################################################################################### # Send via the internal Interface: force_send_socket(DISPATCHER_INTERNAL_IP:5060); # Proxy wï¿1/2hlen (Round-Robin, SIP-Proxies) ds_select_domain("1", "4"); # On Failure: Choose next Proxy t_on_failure("1"); # Relay to the Proxy if (!t_relay()) { sl_reply_error(); } return; } failure_route[1] { # Choose another gateway if (t_check_status("408") && t_local_replied("all")) { if (ds_next_domain()) { # On Failure: Choose next Proxy t_on_failure("1"); # Relay to Proxy t_relay(); } else { t_reply("503", "Service not available"); return; } } }

2 1

[Users] Ack is Losting .........
by raviprakash sunkara 28 Jun '06

28 Jun '06

Hi Users... The UAC's behind the NAT is hung up the softphones.. Automatically... I think Ack is Losting .. So the Session is Looses.. here ...... in this :----> nat_uac_test(paramter) what parameters should placed here.... 3 or 10 or 1 Same fo fix_naed_sdp().. --------------------------- opense,cfg.... route { route(2); if(!method=='ReGISTER') { record_route(); }; if(uri==myself) { ..... ...... .... } route(1); } route[1] { log("Testing-------> route[1] \n"); if (subst_uri('/(sip:.*);nat=yes/\1/')){ setflag(6); }; if (isflagset(5)||isflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ log("Testing-------> route[2] \n"); # force_rport(); if (nat_uac_test("19")) { log("Testing-------> nat_uac-test_19\n"); if (method=="REGISTER") { log("Testing-------> nat _ reg \n"); fix_nated_contact(); } else if (method=="INVITE") { log("Testing-------> nat_cantact \n"); fix_nated_sdp("1"); # fix_nated_contact(); }; force_rport(); setflag(5); }; } route[3] { log("Testing-------> route 3 \n"); if (is_method("BYE|CANCEL")) { log("Testing-------> Bye\n"); acc_db_request("Stop","acc"); unforce_rtp_proxy(); } else if (is_method("INVITE")){ log("Testing-------> Invite in route [3\n"); # fix_nated_sdp("3"); acc_db_request("Start","acc"); force_rtp_proxy(); t_on_failure("1"); } else if(is_method("ACK")) { log("Testing-------------------> ACK\n"); force_rtp_proxy(); }; if (isflagset(5)) { # fix_nated_sdp("3"); search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); }; t_on_reply("1"); } failure_route[1] { if (isflagset(6) || isflagset(5)) { acc_db_request("Stop","acc"); unforce_rtp_proxy(); } } onreply_route[1] { log("Testing-------> t_on_reply\n"); if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])" && (!search("^Content-Length:\ 0"))) { log("Testing ---> 183 200 \n"); force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); # if (isflagset(6)) { ## fix_nated_sdp("1"); # fix_nated_contact(); # } exit; } -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

2 1

[Users] Is there a way to leave a route block and return to it where you left?
by Brandon Price 28 Jun '06

28 Jun '06

I have a route block that performs callerid name lookups for incoming calls. I want to leave this as a separate route block, and not include it into the incoming route for simplicity of development. I basically want to hop out of route 2 down to route 101, then hop back to route 2 under the line that is pointed to. Any clues,? can this even be done or does the structure of the tm (being stateless) limit it? Is there a way to hop to a certain line number of a route like say route(2,4); going to route 2 line 4. I dunno. ############################################################### # INCOMING ############################################################### route[2] { xlog("INVITE Received (incoming): $fu -> $ru"); setflag(1); strip(1); route(101); <--- do more stuff ......................................... ######################################################################## ################################## # CNAM ######################################################################## ################################# route[101] { xlog("Running cnam query"); # do some stuff.... return; };

2 1

[Users] 404 Not found
by Kenny Chua 28 Jun '06

28 Jun '06

Hello all, I've registered my SPA 3000 on my openser server. It logs in and everythin works fine. However I was wondering why do I get this 404 Not found when I do ngrep -qt port 5060. What is causing this? And how do I get rid of it? U 2006/06/28 01:24:52.587457 192.168.1.101:5060 -> 192.168.1.6:5060 NOTIFY sip:192.168.1.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.1.101:5060;branch= z9hG4bK-9291d204..From: Kenny Sipura <sip:203@192.168.1.6>;tag=6824a583236f 93f1o0..To: <sip:192.168.1.6>..Call-ID: 3297ad4b-b2ceeec9@192.168.1.101..CS eq: 413 NOTIFY..Max-Forwards: 70..Event: keep-alive..User-Agent: Linksys/SP A3000-3.1.10(GWd)..Content-Length: 0.... U 2006/06/28 01:24:52.598448 192.168.1.6:5060 -> 192.168.1.101:5060 SIP/2.0 404 User Not Found..Via: SIP/2.0/UDP 192.168.1.101:5060;branch=z9hG 4bK-9291d204..From: Kenny Sipura <sip:203@192.168.1.6>;tag=6824a583236f93f1 o0..To: <sip:192.168.1.6>;tag=eb9822f1ed1b15a932bf98c097b3aaca.d130..Call-I D: 3297ad4b-b2ceeec9@192.168.1.101..CSeq: 413 NOTIFY..Server: OpenSer (1.0. 1 (i386/linux))..Content-Length: 0..Warning: 392 192.168.1.6:5060 "Noisy fe edback tells: pid=4969 req_src_ip=192.168.1.101 req_src_port=5060 in_uri=s ip:192.168.1.6 out_uri=sip:192.168.1.6 via_cnt==1".... **********Openser.cfg********************************** debug=3 fork=yes log_stderror=no listen=192.168.1.6 alias=test.com port=5060 children=32 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); t_relay(); exit; } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { xlog("Does not have to tag, FORBIDDEN\n"); sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); xlog("Forcing rtpport\n"); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); xlog("Unforce RTP proxy2\n"); }; xlog("Dunno why forbidden\n"); sl_reply_error(); xlog("Forbidden4\n"); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); xlog("Setflag cos behind NAT\n"); } lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (uri=~"^sip:00[0-9]*@") { # International PSTN xlog("International PSTN\n"); strip(2); route(4); route(5); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); xlog("NAT Traversal Section\n"); } } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- xlog("Routing to PSTN gateway\n"); rewritehostport("pstn.gateway:5060"); avp_write("i:45", "inv_timeout"); route(1); xlog("Routed to PSTN gateway\n"); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[Users] modules API
by Simon Morvan 28 Jun '06

28 Jun '06

Hello there, Simple question : What is the "rank" passed to the per-child module initialization function ? And why is it sometimes negative ? -- Simon Morvan.

2 1

[Serusers] CDRTool / asterisk billing based
by Concy Pereira 28 Jun '06

28 Jun '06

Hi Harry You can try out these two tools TraBas and Istpp Message: 15 Date: Thu, 22 Jun 2006 17:53:30 +0200 (CEST) From: <hgaillac-sip(a)yahoo.fr> Subject: [Serusers] [Asterisk-Users] CDRTool / asterisk billing based on realtime To: asterisk-users(a)lists.digium.com Cc: serusers(a)iptel.org Message-ID: <20060622155330.80131.qmail(a)web25515.mail.ukl.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 Hello, I read ag-projects it does'not provide support for its cdrtool pseudo gpl licensed . It's one of the bad open source project even seen . No documentation ... A real bad project !! Don't waste time with that Anybody could advise me a billing system based on cdr records with realtime support cdr_obdc.so? Regards Harry

1 0

[Users] Can't rewritehostport to PSTN gateway
by Kenny Chua 28 Jun '06

28 Jun '06

Hi everybody, I'm having problems rewritehostport to PSTN gateway. It gives me the 403 Forbidden error. Here is the error: SEND TIME: 130027089 SEND >> ACK sip:0013373038435@test.com SIP/2.0 Via: SIP/2.0/UDP70.xxx.xxx.xxx:5060;rport;branch=z9hG4bK437FA12BFB124DA68EB569C02212327D From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com>;tag=eb9822f1ed1b15a932bf98c097b3aaca.befd Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9401 ACK Max-Forwards: 70 Content-Length: 0 SEND TIME: 130027095 SEND >> 70.xxx.xxx.xxx:5060 INVITE sip:0013373038435@test.com SIP/2.0 Via: SIP/2.0/UDP70.xxx.xxx.xxx:5060;rport;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com> Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Proxy-Authorization: Digest username="200",realm="test.com",nonce="44a21eb77c572fc09155f89521700490cb8a87ef",response="75921f5f225efeaeb0177e3353769190",uri="sip:0013373038435@test.com" Max-Forwards: 70 Content-Type: application/sdp User-Agent: X-Lite release 1105x Content-Length: 308 v=0 o=200 130026958 130027078 IN IP470.xxx.xxx.xxx s=X-Lite c=IN IP4 70.xxx.xxx.xxx t=0 0 m=audio 8000 RTP/AVP 0 8 3 98 97 101 a=rtpmap:0 pcmu/8000 a=rtpmap:8 pcma/8000 a=rtpmap:3 gsm/8000 a=rtpmap:98 iLBC/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv RECEIVE TIME: 130027172 RECEIVE << 70.xxx.xxx.xxx:5060 SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;rport=5060;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908;received=192.168.1.1 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Server: OpenSer (1.0.1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.6:5060 "Noisy feedback tells: pid=4989 req_src_ip=192.168.1.1 req_src_port=5060 in_uri=sip:0013373038435@test.com out_uri=sip:13373038435@pstn.gateway:5060 via_cnt==1" RECEIVE TIME: 130027371 RECEIVE << 70.xxx.xxx.xxx:5060 SIP/2.0 403 Forbidden To: <sip:0013373038435@test.com>;tag=3360460030-876466 From: Kenny <sip:200@test.com>;tag=1187743606 Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Contact: sip:13373038435@65.xxx.xxx.xxx:5060 Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;received=192.168.1.1;rport=5060;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 Content-Length: 0 SEND TIME: 130027372 SEND >>70.xxx.xxx.xxx:5060 ACK sip:0013373038435@test.comSIP/2.0 Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;rport;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com>;tag=3360460030-876466 Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 ACK Max-Forwards: 70 Content-Length: 0 ********************************Openser.cfg******************************************** debug=3 fork=yes log_stderror=no listen=192.168.1.6 alias=test.com port=5060 children=32 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); t_relay(); exit; } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { xlog("Does not have to tag, FORBIDDEN\n"); sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); xlog("Forcing rtpport\n"); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); xlog("Unforce RTP proxy2\n"); }; xlog("Dunno why forbidden\n"); sl_reply_error(); xlog("Forbidden4\n"); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); xlog("Setflag cos behind NAT\n"); } lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (uri=~"^sip:00[0-9]*@") { # International PSTN xlog("International PSTN\n"); strip(2); route(4); route(5); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); xlog("NAT Traversal Section\n"); } } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- xlog("Routing to PSTN gateway\n"); rewritehostport("pstn.gateway:5060"); avp_write("i:45", "inv_timeout"); route(1); xlog("Routed to PSTN gateway\n"); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

2 1

[Users] Hung up problem
by raviprakash sunkara 28 Jun '06

28 Jun '06

Hi Users,,,, small issues in openser.. UAC 1 , UAC 2 are behind the NAT.. UAC 3 in NAT When I Make call UAC 2 <=================> UAC 1 , After 32 second its automatically hung up the Softphone. Same like .......... whe n UAC 1 <====================================> UAC 2 . When stranger interesting to all Users in OPENSER Developers in this world.. UAC 3 <============================> UAC 1 . it doesn't Hung up the phone But voice is not Hearing .. and UAC 1 <======================> UAC 3 its Hung up automatically ..... voice is clear... listening .. Where will be the problem either in softphone ( x-lite 3,0) or openser.cfgnat .... I thing the TM parameters is holding the Time . to process the call ... please help me................ -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users