sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

[Serusers] serusers request
by rekik refka 18 Jun '06

18 Jun '06

Hi, I'm trying to use jabber module. I didn't know how to configure a DNS server with ser. I retreive some problem with a jabber server.'( file "jabber.xml") I would like to test tow clients one msn and another jabber to exhange an instant message. How can I do it. Can you help me! Thanks in advance.

1 0

[Serusers] Re: mediaproxy problem
by Andrey Kouprianov 18 Jun '06

18 Jun '06

Yup. Me too. I hope to get some comments on this... :) Anyone? On 6/17/06, Hakan YASTI <hakanyasti(a)gmail.com> wrote: > > Hi Andrey, > > I have the same problem with proxy dispatcher. Have got a solution for your > problem. I couldn't see any solution for your problem. > > Hope to hera soon. > > Best Regards, > Hakan. > > > > > Hi, I have tried to install mediaproxy 1.7.2. So, i did. Configuration > was about the same as 1.4.2, however, "mediaproxy start", just > started mediaproxy.py, but not proxydispatcher.py. Version 1.4.2 started > them both w/o any problem. Trying to start proxydispatcher.py > independently did not give any results. /var/run/proxydispatcher.sock is > simply not there anymore. There are no logs or whatsoever, that I could show > you, because I did not find any. Anyway, here's the config > (NOTE: mediaproxy's running on the same machine as SER): [Dispatcher] start > = yes socket = /var/run/proxydispatcher.sock listen = <my IP address> group > = wheel defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = > yes socket = /var/run/mediaproxy.sock group = wheel listen = <my IP > address> allow = <my IP address>, 127.0.0.1 proxyIP = <my IP > address> portRange = 60000:65000 TOS = 0xb8 idleTimeout = 60 holdTimeout = > 3600 forceClose = 10800 [Accounting] dbaccounting = off //<my IP address> > is IP of SER/mediaproxy machine // the rest is irrelevant Please, also note > that I dont have a DNS SRV entry for media proxy. Could that cause the > problem? One way or another, I had to downgrade back to 1.4.2. Any > suggestions? Thanx in advance. Andrey. >

2 2

[Users] voice is not hearing...
by raviprakash sunkara 18 Jun '06

18 Jun '06

Hi , please help me on openser . I'm working on openser , Voice is clearly listening in softphone <----> softphones .but when comes to softphone <-------> hardphones and hardphones <------> hardphones.. I use nathelper module... also... voice is not clearly.... please hel ,What i need to do. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Serusers] sip library
by Felipe Louback 17 Jun '06

17 Jun '06

Hi! I have to write an application for a college project that, in some ways, will behavior like a SIP Proxy. Could any one poing me a library that already implements SIP? It could be C, C++, Perl.... Thanks in advance, Felipe Louback -- Mestrando - Departamento de Engenharia Elétrica Grupo de Pesquisa em Engenharia da Computação e Telecomunicações Universidade Federal de Minas Gerais - Brasil "Vinde a mim vós todos que estai cansados e aflitos, e eu vos aliviarei." Mateus 11:28

3 4

[Serusers] Unresolvable Destination
by Alois Schafferhofer 17 Jun '06

17 Jun '06

Hi, I'm using Presence Snapshot 4.1. If I want to REGISTER my client, I get the error: Unresolvable Destination. I have following lines in my log message: /usr/sbin/ser[8941]: Unknown domain to: sip:PDA_User@fh-joanneum.at from: sip:PDA_User@fh-joanneum.at /usr/sbin/ser[8941]: ERROR: mk_proxy: could not resolve hostname: "fhjoanneum.at" /usr/sbin/ser[8941]: ERROR: uri2proxy: bad host name in URI <sip:PDA_User@fhjoanneum.at> /usr/sbin/ser[8941]: ERROR: t_forward_nonack: failure to add branches /usr/sbin/ser[8941]: sl_reply error() /usr/sbin/ser[8941]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) U 10.0.0.3:5060 -> 10.0.0.11:5060 REGISTER sip:PDA_User@fh-joanneum.at SIP/2.0..Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK479720758..Max-Forwards: 70..From: <sip:PDA_User@fhjoanneu m.at>;tag=1505826169..To: <sip:PDA_User@fh-joanneum.at>..Call-ID: 927318080- 406265317-1110482780..CSeq: 1 REGISTER..Contact: <sip:PDA_User@10.0.0.3>.. Content-Length: 0..User-Agent: SIP .NET 1.0 evaluation version, www.independentsoft.com.... # U 10.0.0.11:5060 -> 10.0.0.3:5060 SIP/2.0 478 Unresolvable destination (478/TM)..Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK479720758..From: <sip:PDA_User@fhjoanneum. at>;tag=1505826 169..To: <sip:PDA_User@fh-joanneum.at>;tag=589230a54cd08b3768529724501fae28- 2449..Call-ID: 927318080-406265317-1110482780..CSeq: 1 REGISTER..Server: S ip EXpress router (0.10.99-dev35-pa-4.1 (i386/linux))..Content-Length: 0..Warning: 392 10.0.0.11:5060 "Noisy feedback tells: pid=8941 req_src_ip=10.0 .0.3 req_src_port=5060 in_uri=sip:PDA_User@fh-joanneum.at out_uri=sip:PDA_User@fh-joanneum.at via_cnt==1".... # U 10.0.0.11:5060 -> 10.0.0.3:5060 SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL)..Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK479720758..From: <sip:PDA_User@fh-joanneum. at>;tag=1505826169..To: <sip:PDA_User@fhjoanneum. at>;tag=56a704c9068c5b1b9228b761fe5fb2cc.2449..Call-ID: 927318080- 406265317-1110482780..CSeq: 1 REGI STER..Server: Sip EXpress router (0.10.99-dev35-pa-4.1 (i386/linux))..Content- Length: 0..Warning: 392 10.0.0.11:5060 "Noisy feedback tells: pid=8941 req_src_ip=10.0.0.3 req_src_port=5060 in_uri=sip:PDA_User@fh-joanneum.at out_uri=sip:PDA_User@fh-joanneum.at via_cnt==1" I hope you can help me. Regards, Alois

2 1

[Serusers] CDRTool+Asterisk
by hgaillac-sip＠yahoo.fr 17 Jun '06

17 Jun '06

Hello, I wish to use CDRTool with both asterisk and ser however I get a lot of errors with cdrtool. I spend time to read scripts without success . Anybody is used to install CDRTool ? Regards Harry ___________________________________________________________________________ Yahoo! Mail réinvente le mail ! Découvrez le nouveau Yahoo! Mail et son interface révolutionnaire. http://fr.mail.yahoo.com

2 1

[Serusers] query about routing
by Aman Sachdeva 17 Jun '06

17 Jun '06

sir, I am aman sachdeva working in positive comsole on voip project. i am using ur server(sip express router) for trial. sir i need ur help to fulfill my requirement is that to add gateway, that means my client call using softphone and sip express router server , route that call to to x.x.x.x(ip). the server is install in other ip. such as clent---->dial a number using softphone(9891713625)----------->sip express royter server is install on y.y.y.y,add prefix and routing ip( xxxxx919891713625(a)x.x.x.x)-------->x.x.x.x(ip) server. i found a script file in ser0.9.6(scripts) folder serconf.sh and i run this file with the parameter dominname and routing ip. but it dosenot route to x.x.x.x(routing ip). could u please tell me where i can change in the source code or script file so that my call is routing to other server. thanks Regards Aman Sachdeva

2 1

[Serusers] Out-of-office-reply: Serusers Digest, Vol 38, Issue 18
by David.Monahan＠aepona.com 17 Jun '06

17 Jun '06

I will be out of the office until 28th June. During this time I will have no email access. In my absence please contact: Steven Egan (steven.egan(a)aepona.com) for project related issues Stephen Drew (stephen.drew(a)aepona.com) for technical issues Regards, David

1 0

[Users] Error while preloading domain 'location'
by zhan li 17 Jun '06

17 Jun '06

Hello klaus, I tried to start openser with acc modules, The error message like this: 0(0) fixing /usr/local/lib/openser/modules/registrar.so save 0(0) db_init: Connection 'mysql://openser:openserrw@localhost/openser' not found in pool 0(0) new_connection: Opening MySQL connection: mysql://openser:openserrw@localhost/openser 0(0) new_connection: Connection type is Localhost via UNIX socket 0(0) new_connection: Protocol version is 10 0(0) new_connection: Server version is 4.0.18-standard 0(0) usrloc:preload_udomain: Wrong version v136545352 for table <location>, expected v1001 0(0) register_udomain(): Error while preloading domain 'location' 0(0) pool_remove: Removing connection from the pool 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration I even tried to openser_mysql drop openser_mysql create after this, I tried again, still same error message. I am using the same configure on ser, no problem, but openser dose not allow me to use acc modules. Please give me help! Thanks John

2 2

[Serusers] Cisco 7960 don't REGISTER
by Ricardo Carvalho 16 Jun '06

16 Jun '06

Hi, I'm trying to get my Cisco 7960 working with my SIP server running SER-0.9.0, but it never registers in the server. When I run "ngrep sip" I always get "401 Unauthorized" responses sent from server to phone. I don't understand why is it happening because I think it's everything well configured. What could be causing this problem? Regards, Ricardo. ngrep log: U 192.168.6.16:50988 -> 192.168.10.90:5060 REGISTER sip:iric.up.pt SIP/2.0..Via: SIP/2.0/UDP 192.168.6.16:5060;branch=z9hG4bK48104c63..From: <sip:105711@iric.up.pt>;tag=00036baad2f4 00d600629c68-0c16f516..To: sip:105711@iric.up.pt..Call-ID: 00036baa-d2f40009-20a38f54-53f31005@192.168.6.16..Max-Forwards: 70..Date: Fri, 16 Jun 2006 10:29:05 GMT..CSeq: 224 REGISTER..User-Agent: Cisco-CP7960G/8.0..Contact: <sip:105711@192.168.6.16:5060;transport=udp>;+sip.in stance="<urn:uuid:00000000-0000-0000-0000-00036baad2f4>";+u.sip!model.ccm.cisco.com="7"..Content-Length: 0..Expires: 3600.... # U 192.168.10.90:5060 -> 192.168.6.16:50988 SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP 192.168.6.16:5060;branch=z9hG4bK48104c63;rport=50988..From: <sip:105711@iric.up.pt>;tag=00036ba ad2f400d600629c68-0c16f516..To: sip:105711@iric.up.pt;tag=11df39ed0e444255bd65b6f6af831c6f.4db5..Call-ID: 00036baa-d2f40009-20a38f54-53f31 005@192.168.6.16..CSeq: 224 REGISTER..WWW-Authenticate: Digest realm="iric.up.pt", nonce="449288cfbfc18bc31d059bf8b935352cf56ec883"..Serve r: Sip EXpress router (0.9.0 (i386/linux))..Content-Length: 0....

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users