sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Kamailio load balance to PBXes
by John Tuxies 20 Jul '20

20 Jul '20

Trying to setup a lab where i would like tohave: -kamailio (5.3 from deb repo) in front to load balance. Keep registrations. IP: 192.168.1.100 -Asterisk _1 (16 LTS). IP: 192.169.1.101.It <http://192.169.1.232.It> will serve as media server for IVR, VM, etc. Bind port is 5080. A sip trunk to Kamailio in sip.conf -Asterisk-2 (16 LTS). IP: 192.168.1.102. Identical config to Asterisk-1. Tried to follow this https://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb, but it is quite old and it does jot apply to newer versions of Asterisk and Kamailio. Up to jow i have the Kamailio setup and users can register on Kamailio following the basic setup. I would like advice on setup and configuration, to integrate Kamailio with Asterisk boxes Some advice please? Sincerely yours, John

2 2

Kamailio load balance to PBXes
by John Tuxies 20 Jul '20

20 Jul '20

Trying to setup a lab where i would have: -kamailio in front to load balance. Keep registrations. IP: 192.168.1.100 -Asterisk _1 (16 LTS). IP: 192.169.1.101.It <http://192.169.1.232.It> will serve as media server for IVR, VM, etc. Bind port is 5080. A sip trunk to Kamailio in sip.conf -Asterisk-2 (16. IP: 192.168.1.102. Identical config to Asterisk-1. Tried to follow this https://kb.asipto.com/asterisk:realtime:kamailio-3. 0.x-asterisk-1.6.2-astdb, but it is quite old and it does jot apply to newer versions of Asterisk and Kamailio. Up to jow i have the Kamailio setup and users can register on Kamailio following the basic setup. I would like advice on setup and configuration, to integrate Kamailio with Asterisk boxes

1 0

Kamailio load balance to PBXes
by John Tuxies 20 Jul '20

20 Jul '20

Trying to setup a lab where i would have: -kamailio in front to load balance. Keep registrations. IP: 192.168.1.218 -Asterisk _1. IP: 192.169.1.232.It will serve as media server for IVR, VM, etc -Asterisk-2. IP: 192.168.1.233. Identical config to Asterisk-1. Tried to follow this https://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb, but it is quite old and it does jot apply to newer versions of Asterisk and Kamailio. Up to jow i have the I would like advice on setup and configuration,

1 0

Kamailio & Freeswitch as media and SBC
by John Tuxies 20 Jul '20

20 Jul '20

Trying to setup Kamailio with Freeswitch in a Debian machine as in the http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc, but Kamailio fails to start and gives a ton of errors. Before of the alterations Kamailio and Siremis start correctly and i can easily create users through Siremis. After the changes to include Freeswitch's blocks, it fails to start. All run in the same machine with IP 192.168.1.213. I am attaching kamailio.cfg (named as test1.txt) if someone could spot the error, please. Also i am attaching the kamailio.cfg(Original1.txt) when it was working fine with Siremis.

3 8

SIP Security handling in Kamailio IMS
by BALL SUN 20 Jul '20

20 Jul '20

Hi During the testing with Kamailio IMS, we found that SUBSCRIBE and NOTIFY message flow between UE and P-CSCF is shown below. SUBSCRIBE and its response: 192.168.1.102:9101 (port-c) -> 192.168.2.66:6101 (port-s) NOTIFY: 192.168.2.66:5101 (port-c) -> 192.168.1.102:9100 (port-s) based on the sip security, is it the expected behavior that they are using port-c and port-s? The reason why we asked is because we found that the NOTIFY did not properly propagate to the UE due to different port addresses. Does anyone have this experience? and how we can resolve it? - RBK

2 2

the list with sip compact header names
by Daniel-Constantin Mierla 17 Jul '20

17 Jul '20

Hello, anyone knowing by heart or a place listing all compact header names? I found: - https://www.cs.columbia.edu/sip/compact.html but it says: Last updated 01/10/2008 Maybe newer RFC introduced other compact header names. Or, in case you are aware of some other compact names not listed there, just say it here, as I am working a bit on updating the parser on this scope. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla

2 2

CommCon 2020 Online - Now presentation about Kamailio
by Daniel-Constantin Mierla 16 Jul '20

16 Jul '20

Hello, being a bit late with this announcement, as it started a couple of minutes ago, but if anyone wants to watch the live presentation about Kamailio by Fred Posner at CommCon 2020 Online, here is the link: - https://www.youtube.com/watch?v=FGZF7dYdRng Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla

1 0

Reset Prometheus counter once
by Marat Gareev 16 Jul '20

16 Jul '20

Hello. Are there any ways to reset the Prometheus counter once? I can do something like this, but counter will be reset on each request loadmodule "xhttp_prom.so" > modparam("xhttp_prom", "prom_counter", "name=mycounter;") > route { > prom_counter_reset("mycounter"); > } Otherwise, I will not receive the counter until a special and rare event occurs. Regards, Marat

3 4

RPC Socket stops answering after a few time.
by David VILLAUME 16 Jul '20

16 Jul '20

Hello, I’m having problem with RPC socket that stops answering after approximatively one or two hours. Version is 5.2.7 My principal host with exact same version and configuration has no problem, only the backup node (Keepalived + DMQ) encounters the problem. I could catch this log about the problem, but didn’t find any reason for this : Jun 18 10:53:33 sbc-kam-partner-b kamailio[83170]: ERROR: ctl [binrpc_run.c:600]: rpc_send(): ERROR: binrprc: rpc_send: send failed My configuration about rpc : loadmodule "jsonrpcs.so" modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl") modparam("ctl", "binrpc_max_body_size", 1024) Do you have any idea to troubleshoot this ? Regards, David

2 13

Routing specific number from kamailio to asterisk
by Hendra 834 16 Jul '20

16 Jul '20

Hi, Im new in VoIP, especially Kamailio. I want to connect my kamailio with asterisk by routing the call coming from kamailio to asterisk for specific number, also from asterisk to kamailio. For example, if kamailio client call ext number 0123, the will be routed to asterisk, if kamailio client call 0233 the call will not be routed to external proxy. And also how can I receive call form asterisk to kamailio ? Is there any real example, ? because I dont understand what to change in documentation example. Thanks

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users