sr-users

sr-users@lists.kamailio.org

28 participants
37537 discussions

[Serusers] ser and busy lines
by Ahmad Cheikh-Moussa 21 Apr '05

21 Apr '05

Hi! Following Situation: 1 x SER Server 1 x Gateway with two PRIs What happens if all lines are busy and a user wants to make another call to the PSTN? Will the user get a busy tone ? Is there a way that the ser server knows how many lines are busy ? Regards, Ahmad -- Ahmad Cheikh-Moussa NetUSE AG Dr.-Hell-Straße, 24107 Kiel, Germany Telefon: +49 431 2390 400 -- Telefax: +49 431 2390 499 Service: Service(a)NetUSE.DE -- http://NetUSE.DE/

2 1

[Serusers] SER on IPV6 ?
by Yin, Ming 21 Apr '05

21 Apr '05

Hallo everyone, Can anyone tell me, whether the SER can also be deployed in IPv6 network or not ? We have setup a ipv6 testbed and want to demonstrate SIP-based VoIP on that. Thanks in advance ! Kind Regards Ming

2 1

[Serusers] if routeXX fails..
by Matt Schulte 21 Apr '05

21 Apr '05

Is it possible to do this? or is it bad practice, I'm assuming the "extra" route would have to return an error code to show a nonpositive? I coulda swore I got this to work awhile back. if (!route(6)) { xlog("L_INFO", "NOTICE: blah <%ru> sending 404\n"); sl_send_reply("404", "Not Found"); break; } else { # Else route6 ran another route and break break; }

2 1

[Serusers] BYE records for mysql
by Barry Murphy 21 Apr '05

21 Apr '05

Hey guys, I don't seem to get BYE records from SER being sent to mysql, I get INVITE and ACK. Without BYE I can't see who terminated the call, caller or callee, and I can't determin the duration of the call. Any ideas? Thanks Barry

3 2

[Serusers] codecs with ser
by Barry Murphy 21 Apr '05

21 Apr '05

Hi, How do I tell ser to allow gsm codec? I can only make calls using ulaw for some reason :/ Barry

2 1

[Serusers] stop that
by WktE7＠aol.com 21 Apr '05

21 Apr '05

oy u stop sending for me any stupid e-mails i don't wont them, if u will send me another e-mail i will call to police for sending to me unwonted e-mails, thanks

3 2

[Serusers] SER high availability setup
by Atif Rasheed 21 Apr '05

21 Apr '05

Hi, I am trying to deploy a solution as shown below: SER<------>Asterisk1 | --->Asterisk2 | --->Asterisk3 Calls come in to the SER machine. I want to distribute calls among the asterisk machines(all with the same specifications). I initially tried using DNS round robin. It works well but doesn not have builtin failover mechanisms. So if a machine goes down calls will not be rerouted and sent to other available machines. I then tried using DNS SRV but, it seems, unfortunately SER does not support failover support yet. Now I am not sure how to distribute load amongst these machines. Any ideas suggestions will greatly be appreciated. Regards, Danish

2 1

[Serusers] Ser + Asterisk
by Elton Machado 21 Apr '05

21 Apr '05

Hi guys, I'm working of configurations examples, how to get Ser and Asterisk working together in peace ;) What I wan to do is to have ser doing all the hard work, registering, billing, proxying and help at nat stuff, and use asterisk to register myself at my sip providers, as I couldn't found a way to do it with ser. An idea how the things are or will be connected is... [ UAC's ] -> SER -> * / (Ser?) <-> [firewall full port redirect] -> router -> sip provider 192.168.20.x 192.168.20.1 192.168.20.10|192.168.30.10 192.168.30.1 192.168.30.x | 172.16.32.1 | 172.16.32.254 |external ip semi fixed or fixed I have all the stuff running fine if I use an IAX provider, problem is... all my providers use sip :( Does anyone has any clue to point me out ? Sip session goes fine but it just get stuck in rtp nat and I can't understand very well why. Another is the UAC's try to reach by itself the sip provider jupping over all 192.168.20.x/30.x thins goes fine if I use stun of course. My question is... Is there any way to do the same in asterisk? Like use a tun server or something, or using ser to help it to change any contact or sip headers field? HOw is the best way to acomplished that? Best Regards,

4 4

[Serusers] Ser + Asterisk for VoIP service provider
by John Best 21 Apr '05

21 Apr '05

Hello, I have recently been put in charge of starting up a VoIP project connecting voip trunk lines to business' existing PBX's. I have decided to go all open source and have figured out asterisk pretty well. The problem is with SER. There does not seem to be a lot of clear documentation on asterisk interoperability. My idea is to use SER for the bulk of the call routing and asterisk for voicemail, billing, and other apps. All calls will be sip to me and then passed onto a VoIP provider who will handle all Long distance and PSTN service. Does anyone have any suggestions on setup, or any config files they could email me please? Thanks

2 1

[Serusers] Serweb Problem
by Edgardo O. Gonzales II 21 Apr '05

21 Apr '05

Please give your help ... thanks ... Hi SerUser! Can somebody help me with this problem.. After I install and configure serweb as stated on configuration guide.. I got a blank page accessing admin and user_interface page. On logs of my apache, this is the feedback .. 210.23.237.236 - - [21/Apr/2005:23:51:12 +0800] "GET /serweb/user_interface/index.php?phplib_Session=4026e0eaf3aa336098b7e1d2926f49ff&phplib_Session=dc200ec3587d1985cf9aaf706d3b248c&phplib_Session=8d66aaa5f4418cb75126beda37c2acde&phplib_Session=14d85207dd2ec6439325db9f78bea914&phplib_Session=3a23bcfc1ecae59dcefead744c64aaf3&phplib_Session=6ff4d142925c0574d1d3614bcb679578&phplib_Session=5d83ca96f291e0310ab4777442a547f9&phplib_Session=8ac2999cee413bde7ef4769b8f73b860&phplib_Session=96c5b130e01b2db96d73bc050248183e&phplib_Session=9ae3f9631ab331d0c0299cf394e6f691&phplib_Session=ddb01b22fdc4d988a9093a37cf4ee00b&phplib_Session=d48993a3af2167a562d151f2cb285ce4&phplib_Session=2492b77a05e07417c38d229d30f58d9a&phplib_Session=a4edc5415a40e4a922c4dbf721f25dc0&phplib_Session=5d41839c67fbc842ac27f59a558e982a&phplib_Session=7b5b95a63d36ffdf9b412264bf941691&phplib_Session=507571c99dc312b6e36ea364de2644f4&phplib_Session=0992981f5a11f248824edbb95f5db9f3&phplib_Session=1f25b8f300e72b404a54ab4c2c4060e8&phplib_Session=870611806d28cda0d0021f8422454! 12a&ph p lib_Session=f5c422596455228e1749a081e1d9be1e&phplib_Session=2ecc3410c0ef13c4a66f12d51b02e7a3&phplib_Session=ff433b28f8596fe03518398fef080887&phplib_Session=aec18ca4299ec9009c236cde5d0bb733&phplib_Session=5937f583e214b20d67999da9947a9b7c&phplib_Session=854621f5353598bf6b6c9fd0f882766a&phplib_Session=0809e0fb3fddff21a14190e4240b814a&phplib_Session=22b80c053272e22c30c33a883182e014&phplib_Session=7c69db32533cd64b763462353c20d927&phplib_Session=c4eeba51a9991c5161269dafa9647d38&phplib_Session=472ca546c8ff6970ea9cae514940b86f&phplib_Session=c3c6871818a255d4eafe2d8a373228ef&phplib_Session=fded6f2f186c6d2dedd467a2b93f5c2a&phplib_Session=53033ca88aa7ec64b25d70f8ac424086&phplib_Session=62744ffaf3c7866e2f3324b1d6ca9f69&phplib_Session=d43a04d83057e27859e9a9db63782a4c&phplib_Session=bb309e7809c1341764212cab865e33ce&phplib_Session=002136a613c2bdee8d927d8a43be20ad&phplib_Session=82a678edfc54753212929c25f5fb5221&phplib_Session=2de93e7370b1de73041c6f4dc21a11df&phplib_Session=dfd10093b5f05cccd! 3178ad f cc3f8c62 HTTP/1.1" 302 - Is there something I miss during the configuration .. thanks, ed

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users