Hello,
see dbtext for that. But notice that the module has not been thoroughly
tested. It is not included in v0.8.10 so you have to use a CVS snapshot
which is quite unstable these days due to lots of changes. If you want
to use it before the new release of ser is out you might get weird
situations, but you can provide us some help with testing ... It is your
choice ...
-.-
Best regards,
Daniel
David Beckemeyer wrote:
>I'm trying to get SER up and I need auth. I'm not a Mysql user
>and, frankly, I'd rather not need to learn it, just to get
>authentication support. I wish there were a middle-ground
>between no-auth at all and a full-blown Mysql installation.
>
>I tried the Cookbook approach, using Dan Austin's HOWTO for
>setting up Mysql for SER, but the commands do not work as shown
>so I'm left with learning Mysql through and through to debug
>why those cookbook commands don't work.
>
>I'm very familiar with SIP and I want to test SER, not a new Sql
>server DB engine. It seems like Mysql is a distraction to that
>effort.
>
>Is anyone working on something like a flat-file module to
>replace Mysql? Any pointers for the best place to start on
>developing such a module (i.e. shortcuts)?
>
>Thanks,
>
> - david
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>
>
Hi Michael,
This is exactly what I would like to achieve.
I understand the meaning of your pseudo code below, but alas I have not enough
knowledge and skills to transform your pseudo code below into a working
script.
Could you please provide a real example ?
Lasse
Michael_Graff(a)isc.org wrote:
> Nils Ohlmeier <nils(a)ohlmeier.de> writes:
> > A proxy can challenge Invites and Byes, but should not do this with
> > external Invites to your local user. Otherwise your your user
> > wouldn't be reachable from outside.
>
> I implemented something much like this:
>
> if (to me):
> if register
>
> www_authorize or fail if not a valid register
>
> done
>
> if claiming to be "From" one of the domains I accept
> registrations for
>
> proxy_authorize
>
> done
>
> if not to me (I'm relaying for a local phone to an external address)
>
> proxy_authorize (once again, based on from address)
>
> done
>
> --Michael
On ATA side, you just need to enable the 'Receiver-tagged VIA header'
feature by setting bitt 22 of ConnectMode to 1. On SER side, nothing you
need to configure specifically.
----- Original Message -----
From: "Michael Vasilenko" <acid(a)dg.net.ua>
To: "Bo" <boman122(a)yahoo.com>
Sent: Friday, March 28, 2003 9:52 AM
Subject: Re: [Serusers] ATA 186 Behind NAT
> Bo (boman122(a)yahoo.com) wrote:
> > Yes. I already tested that.
>
> Can you please explain, what I must configure in ATA and SER
> to make a call from ATA with private IP
> >
> > ----- Original Message -----
> > From: "Ricardo Villa" <ricvil(a)epm.net.co>
> > To: <serusers(a)lists.iptel.org>
> > Sent: Friday, March 21, 2003 10:24 AM
> > Subject: [Serusers] ATA 186 Behind NAT
> >
> >
> > > Hi,
> > >
> > > I was reading about the ATA186's ability to detect that it is behind a
> > NAT.
> > > It requires that:
> > >
> > > "For the Cisco ATA to automatically detect its presence behind a NAT,
the
> > > SIP proxy server
> > > or remote user agent server must include the "received=" parameter in
the
> > > Via header in the
> > > responses to the Cisco ATA if the proxy detects that the source
address
> > and
> > > port do not match
> > > those in the Via header."
> > >
> > > Does SER support it?
> > >
> > >
> > > Thanks,
> > > Ricardo
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers(a)lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
> --
> Michael Vasilenko
Hi
Where is the voicemail for ser at? Is it presently available? I glanced
through the cvs and couldn't find any.
Asterisk has decent voicemail.. however its not yet ported to anything else
except Linux
check out http://www.asteriskpbx.org
Sean
> -----Original Message-----
> From: Jiri Kuthan [mailto:jiri@iptel.org]
> Sent: Monday, March 31, 2003 7:59 AM
> To: ahmed.abdoulla(a)tedata.net; serusers(a)lists.iptel.org
> Subject: Re: [Serusers] Voicemail Feature
>
>
> At 06:11 PM 3/30/2003, Ahmed Abdoulla wrote:
>
> >Dear Madam/Sir,
> >
> >
> >
> >We are a data communication provider in Egypt, and we are
> very much interested in deploying SER.
> >
> >We are particularly interested in having a voicemail feature
> as one of our offerings, and we have tried the CVS (8.11)
> version but we have noticed (naturally) that it's not stable yet.
> >
> >
> >
> >Could you please give us a rough estimate on when you
> believe a beta or alpha release will be available?
>
> I'm little a bit reluctant to do so -- it has always taken
> longer than we anticipated
> and I would not like to set unrealistic expactations. If you
> insist -- without any
> guarantee, a *testing* version may be ready to go in two weeks.
>
> -Jiri
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
Hi,
Try to use mysql and auth. But, got the msg "ERROR:
bad config file (1 eorros)", when I type
"/usr/local/ser". Is anything wrong in my ser.cfg?
Thanks,
Alan
[root@localhost ser]# more ser.cfg
#
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
# modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
modparam("auth", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
modparam("auth", "password_column", "password")
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwars==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too
big");
break;
};
# Do strict routing if pre-loaded route
headers present
rewriteFromRoute();
# if the request is for other domain use
UsrLoc
# (in case, it does not work, use the
following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
if
(!www_authorize("iptel.org", "subscriber")) {
www_challenge("iptel.org", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled
using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not
Found");
break;
};
};
# forward to current uri now
if (!t_relay()) {
sl_reply_error();
};
}
=====
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
Dear Madam/Sir,
We are a data communication provider in Egypt, and we are very much
interested in deploying SER.
We are particularly interested in having a voicemail feature as one of
our offerings, and we have tried the CVS (8.11) version but we have
noticed (naturally) that it's not stable yet.
Could you please give us a rough estimate on when you believe a beta or
alpha release will be available?
Thanks a lot for your time and cooperation.
Regards,
Ahmed Abdoulla
Quality Unit Manager
Acting WebDev Unit Manager
TE Data
11, Cleopatra St, Heliopolis
TEL : +20-2-4166660
FAX : +20-2-4166700
Hi,
I would like to use the registrar module, but ser crahses after calling the
save() or lookup() functions. Any idea?
syslog:
BUG: tcp_main_loop: dead child 6
tcp_main_loop: read response= bffff638, 2003 from 6 (20531)
BUG: tcp_main_loop: unknown cmd 2003
child process 20531 exited by a signal 11
core was not generated
INFO: terminating due to SIGCHLD
INFO: signal 15 received
Thanks,
--
---------------------------------------------------------------------------
Miklos Tirpak
Computer and Automation Research Institute e-mail : mtirpak(a)sztaki.hu
of the Hungarian Academy of Sciences phone : (361) 279-6011
H-1132. Budapest, Victor Hugo u 18-22 fax : (361) 279-6021
Hello
Is there a built in function that can check to see if a user exists (not
registered). I have a need to send different error codes depending on
whether a phone number is unallocated or it is allocated but not
registered. What I require is this
if (!lookup("location")) {
if (user does not exist) {
sl_send_reply ("604", "Does not exist anywhere");
break;
}
else {
sl_send_reply ("404", "Not Found");
break;
};
};
if (!t_relay()) {
sl_reply_error();
};
Thanks
Luke
during my pstn gateway survey, some people asked about cheap PSTN
gateways. Let me share what I know, speak up if you know more.
analog
-------
AudioCodes and AlliedTelesyn provide SIP FXO gateways wuith four ports
for about $1000. We have both of them in our lab (i.e., they do exist)
but haven't tested them yet (i.e., we don't know if they work).
MediaTrix might have some too, perhaps sightly cheaper, but they denied
shipping to us as we are not in their interoperability club (which makes
me cautios about their interoperability).
arrayvox was claiming to have some very cheap ones, but I neither know if
they shop nor if they work. The same for welltech.
in general, not only is a challenge to make the sip part of it work, but
also the analog -- tone recoginition may be pretty challenging. It differs
country from country and pbx from pbx.
digital
-------
I don't know -- some people meant Asterisk would do that, some other meant
not really.
other
-----
someone told me vegstream (both digital and analog) was good and afforable.
more can be found at
http://www.iptel.org/info/products/index.php?category=gateway&name=Gateways…
--
Jiri Kuthan http://iptel.org/~jiri/
