just in case someone would like to show up there. first come, first served.
-jiri
>Hello!
>
>Internet Telephony Conference & Expo is right around the corner! As a speaker and participant in the conference program, TMC would like to offer you (2) conference passes free of charge. These passes can be given to colleagues, clients, or guests that you would like to invite to hear you speak and to the show. These passes would be full conference passes and would allow that person to go to the entire event, not just to your session.
>
>If you would like to take advantage of this offer all you need to do is e-mail the following
>information for each person:
>
>Name
>Title
>Company name
>Address
>Phone
>Fax
>E-mail
>
>Put "Internet Telephony Miami Speaker Conference Program" in the subject line and you are done! The pass will be sent to them in the mail.
>
>As a speaker, you will already have your speaker pass prepared. Please pick up your pass at the event registration.
>
>PLEASE NOTE - this program is not to replace an existing conference pass. No monies that might have been paid will be refunded.
Yes, that was my problem! Thank you very mutch!
Are you involved in the SHIP (http://voip.sh.cvut.cz/about.shtml)
project? (because of your emailaddress). I read that you are using Vocal
as voice mail server. Do you have an installation guide how to setup
such a system with vocal and ser?
regards,
Klaus
> -----Original Message-----
> From: Jan Janak [mailto:J.Janak@sh.cvut.cz]
> Sent: Friday, January 17, 2003 1:14 PM
> To: Klaus Darilion
> Cc: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] Password problem with ser and mysql
>
>
> Hello,
>
> auth is not the only module that uses database. If you have
> enabled support for database in usrloc (by modparam("usrloc",
> "db_mode", 1) or modparam("usrloc", "db_mode", 2) then you
> have to change usrloc's password as well. Try to use the
> following: modparam("usrloc", "db_url",
> "sql://ser:klaus@localhost/ser")
>
> regards, Jan.cd
>
> On 17-01 11:56, Klaus Darilion wrote:
> > Hello Jan!
> >
> > Comments inline.
> > > default username and password for auth module is
> > > serro:47serro11, if you are able to login as ser:heslo, then
> > > username and password can be changed.
> >
> > > If you change your password in mysql, you must change it for
> > > ser@localhost For example: grant ALL on ser.* to
> > > ser@localhost identified by 'klaus';
> >
> > I changed it for localhost, but it won't work.
> >
> > > If you use something like grant ALL on ser.* to ser
> > > identified by 'klaus'; then the server will be unable to
> > > login to the database.
> > >
> > > Try also the following:
> > > mysql -h localhost -u ser -p ser
> >
> > I changed the password of ser@localhost to 'klaus'. I can
> connect to
> > mysql with mysql -h localhost -u ser -p ser
> > and password 'klaus'. I changed the password in ser.cfg to 'klaus'
> > modparam("auth", "db_url", "sql://ser:klaus@localhost/ser")
> > , but still the ser server can't start:
> > : connect_db(): Access denied for user: 'ser@localhost' (Using
> > password: YES)
> >
> >
> > I still think there must be a bug somewhere, so that ser tries to
> > connect with the 'heslo' password.
> >
> > regards,
> > Klaus
> >
> > > This will prompt for password, if you are unable to login
> > > with your password, ser will be unable to login as well
> > > (probably because you changed password for ser and not for
> > > ser@localhost)
> > >
> > > regards, Jan.
> > >
> > > On 16-01 18:34, Klaus Darilion wrote:
> > > > Hello!
> > > >
> > > > I have sucessfully installed the ser server (0.8.10 from
> > > rpms) with an
> > > > mysql database. When I use the standard password for the user
> > > > "ser"
> > > > everything works fine. But if I change the password from
> > > "heslo" to a
> > > > new one, for example "klaus" instead of "heslo" (of
> course in the
> > > > mysql-database und in the config file) the ser server
> can not start
> > > > up.
> > > >
> > > > Following are some different configurations and my suggestions
> > > > what
> > > > could be the problem.
> > > >
> > > > ser.cfg: modparam("auth", "db_url",
> > > > "sql://ser:heslo@localhost/ser")
> > > > mySQL-root-password: XXXXX
> > > > mySQL-ser-password: heslo
> > > > ---> works fine
> > > >
> > > > ser.cfg: modparam("auth", "db_url",
> > > > "sql://ser:klaus@localhost/ser")
> > > > mySQL-root-password: XXXXX
> > > > mySQL-ser-password: klaus
> > > > ---> doesn't work: connect_db(): Access denied for user:
> > > > ---> 'ser@localhost'
> > > > (Using password: YES)
> > > > should work, so I tried another user
> > > >
> > > > ser.cfg: modparam("auth", "db_url",
> > > "sql://root:XXXXX@localhost/ser")
> > > > mySQL-root-password: XXXXX
> > > > mySQL-ser-password: heslo
> > > > ---> works fine
> > > >
> > > > ser.cfg: modparam("auth", "db_url",
> > > "sql://root:XXXXX@localhost/ser")
> > > > mySQL-root-password: XXXXX
> > > > mySQL-ser-password: klaus
> > > > ---> doesn't work: connect_db(): Access denied for user:
> > > > ---> 'ser@localhost'
> > > > (Using password: YES)
> > > > very strange, because I told ser to connect as root. Is ser
> > > using the
> > > > default user/password instead of the configured one?
> > > >
> > > > ser.cfg: modparam("auth", "db_url",
> > > "sql://root:YYYYY@localhost/ser")
> > > > mySQL-root-password: XXXXX
> > > > mySQL-ser-password: heslo
> > > > ---> doesn't work: connect_db(): Access denied for user:
> > > > 'root@localhost' (Using password: YES)
> > > > of course it doesn't work, wrong password. So ser cares
> about the
> > > > settings in ser.cfg
> > > >
> > > > So my suggestion is that ser connects several times to the
> > > > database
> > > > whereas one time it uses the configured user/password and
> > > another time
> > > > it uses the default user/password - maybe a bug in the auth
> > > > module?
> > > >
> > > > Or does somebody of you changed the password successfuly?
> > > >
> > > > It would be nice if you can help me.
> > > >
> > > > Thanks,
> > > > Klaus
> > > >
> > > > My system is:
> > > > Linux version 2.4.18-14 (bhcompile(a)astest.test.redhat.com)
> > > (gcc version
> > > > 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4
> > > 12:13:11 EDT 2002
> > > > MySQL 3.23.52
> > > > ser-0.8.10-2.i386.rpm
> > > > ser-mysql-0.8.10-2.i386.rpm
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > >
> >
> _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
>
At 01:59 PM 1/17/2003, Klaus Darilion wrote:
>Yes, that was my problem! Thank you very mutch!
>
>Are you involved in the SHIP (http://voip.sh.cvut.cz/about.shtml)
>project? (because of your emailaddress).
Jan is.
>I read that you are using Vocal
>as voice mail server. Do you have an installation guide how to setup
>such a system with vocal and ser?
I tried to deploy the vocal voicemail a while ago and it did not
meet me expectations. We are working on our own now.
-Jiri
Hello Jan!
Comments inline.
> default username and password for auth module is
> serro:47serro11, if you are able to login as ser:heslo, then
> username and password can be changed.
> If you change your password in mysql, you must change it for
> ser@localhost For example: grant ALL on ser.* to
> ser@localhost identified by 'klaus';
I changed it for localhost, but it won't work.
> If you use something like grant ALL on ser.* to ser
> identified by 'klaus'; then the server will be unable to
> login to the database.
>
> Try also the following:
> mysql -h localhost -u ser -p ser
I changed the password of ser@localhost to 'klaus'. I can connect to
mysql with
mysql -h localhost -u ser -p ser
and password 'klaus'. I changed the password in ser.cfg to 'klaus'
modparam("auth", "db_url", "sql://ser:klaus@localhost/ser")
, but still the ser server can't start:
: connect_db(): Access denied for user: 'ser@localhost' (Using
password: YES)
I still think there must be a bug somewhere, so that ser tries to
connect with the 'heslo' password.
regards,
Klaus
> This will prompt for password, if you are unable to login
> with your password, ser will be unable to login as well
> (probably because you changed password for ser and not for
> ser@localhost)
>
> regards, Jan.
>
> On 16-01 18:34, Klaus Darilion wrote:
> > Hello!
> >
> > I have sucessfully installed the ser server (0.8.10 from
> rpms) with an
> > mysql database. When I use the standard password for the user "ser"
> > everything works fine. But if I change the password from
> "heslo" to a
> > new one, for example "klaus" instead of "heslo" (of course in the
> > mysql-database und in the config file) the ser server can not start
> > up.
> >
> > Following are some different configurations and my suggestions what
> > could be the problem.
> >
> > ser.cfg: modparam("auth", "db_url", "sql://ser:heslo@localhost/ser")
> > mySQL-root-password: XXXXX
> > mySQL-ser-password: heslo
> > ---> works fine
> >
> > ser.cfg: modparam("auth", "db_url", "sql://ser:klaus@localhost/ser")
> > mySQL-root-password: XXXXX
> > mySQL-ser-password: klaus
> > ---> doesn't work: connect_db(): Access denied for user:
> > ---> 'ser@localhost'
> > (Using password: YES)
> > should work, so I tried another user
> >
> > ser.cfg: modparam("auth", "db_url",
> "sql://root:XXXXX@localhost/ser")
> > mySQL-root-password: XXXXX
> > mySQL-ser-password: heslo
> > ---> works fine
> >
> > ser.cfg: modparam("auth", "db_url",
> "sql://root:XXXXX@localhost/ser")
> > mySQL-root-password: XXXXX
> > mySQL-ser-password: klaus
> > ---> doesn't work: connect_db(): Access denied for user:
> > ---> 'ser@localhost'
> > (Using password: YES)
> > very strange, because I told ser to connect as root. Is ser
> using the
> > default user/password instead of the configured one?
> >
> > ser.cfg: modparam("auth", "db_url",
> "sql://root:YYYYY@localhost/ser")
> > mySQL-root-password: XXXXX
> > mySQL-ser-password: heslo
> > ---> doesn't work: connect_db(): Access denied for user:
> > 'root@localhost' (Using password: YES)
> > of course it doesn't work, wrong password. So ser cares about the
> > settings in ser.cfg
> >
> > So my suggestion is that ser connects several times to the database
> > whereas one time it uses the configured user/password and
> another time
> > it uses the default user/password - maybe a bug in the auth module?
> >
> > Or does somebody of you changed the password successfuly?
> >
> > It would be nice if you can help me.
> >
> > Thanks,
> > Klaus
> >
> > My system is:
> > Linux version 2.4.18-14 (bhcompile(a)astest.test.redhat.com)
> (gcc version
> > 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4
> 12:13:11 EDT 2002
> > MySQL 3.23.52
> > ser-0.8.10-2.i386.rpm
> > ser-mysql-0.8.10-2.i386.rpm
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
>
Hello!
I have sucessfully installed the ser server (0.8.10 from rpms) with an
mysql database. When I use the standard password for the user "ser"
everything works fine. But if I change the password from "heslo" to a
new one, for example "klaus" instead of "heslo" (of course in the
mysql-database und in the config file) the ser server can not start up.
Following are some different configurations and my suggestions what
could be the problem.
ser.cfg: modparam("auth", "db_url", "sql://ser:heslo@localhost/ser")
mySQL-root-password: XXXXX
mySQL-ser-password: heslo
---> works fine
ser.cfg: modparam("auth", "db_url", "sql://ser:klaus@localhost/ser")
mySQL-root-password: XXXXX
mySQL-ser-password: klaus
---> doesn't work: connect_db(): Access denied for user: 'ser@localhost'
(Using password: YES)
should work, so I tried another user
ser.cfg: modparam("auth", "db_url", "sql://root:XXXXX@localhost/ser")
mySQL-root-password: XXXXX
mySQL-ser-password: heslo
---> works fine
ser.cfg: modparam("auth", "db_url", "sql://root:XXXXX@localhost/ser")
mySQL-root-password: XXXXX
mySQL-ser-password: klaus
---> doesn't work: connect_db(): Access denied for user: 'ser@localhost'
(Using password: YES)
very strange, because I told ser to connect as root. Is ser using the
default user/password instead of the configured one?
ser.cfg: modparam("auth", "db_url", "sql://root:YYYYY@localhost/ser")
mySQL-root-password: XXXXX
mySQL-ser-password: heslo
---> doesn't work: connect_db(): Access denied for user:
'root@localhost' (Using password: YES)
of course it doesn't work, wrong password. So ser cares about the
settings in ser.cfg
So my suggestion is that ser connects several times to the database
whereas one time it uses the configured user/password and another time
it uses the default user/password - maybe a bug in the auth module?
Or does somebody of you changed the password successfuly?
It would be nice if you can help me.
Thanks,
Klaus
My system is:
Linux version 2.4.18-14 (bhcompile(a)astest.test.redhat.com) (gcc version
3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002
MySQL 3.23.52
ser-0.8.10-2.i386.rpm
ser-mysql-0.8.10-2.i386.rpm
Hi,
I have installed ser and was amazed how easy it was to install (we have
previously experimented with sipd, which finally runs ...).
I have run through the archives and also looked at all the
documentation, but some things still don't work.
I use kphone 2.11 as client, but have tried sipc on a solaris box to the
same extend. I am running kphone and ser 0.8.10 on redhat 8. MySQL is
3.23.52.
I have set the domain/realm things to cs.stir.ac.uk and restarted ser.
I have then set up a user using "serctl add srm test srm(a)cs.stir.ac.uk".
Now, on serweb in user_interface/index I cannot login with this user.
In kphone, I cannot register (it works ok on the columbia server):
----kphone says------------------------------------------
SipTransaction: Retransmit 1 (4000)
SipClient: Sending: 15:09:37.098
--------------------------------
REGISTER sip:cs.stir.ac.uk SIP/2.0
Via: SIP/2.0/UDP 139.153.254.196:5062
CSeq: 488 REGISTER
To: "Stephan" <sip:srm@cs.stir.ac.uk>
Expires: 900
From: "Stephan" <sip:srm@cs.stir.ac.uk>
Call-ID: 1902284369(a)139.153.254.196
Content-Length: 0
User-Agent: KPhone/2.11
Event: registration
Allow-Events: presence
Contact: "root"
<sip:root@139.153.254.196:5062;transport=udp>;methods="INVITE, MESSAGE,
INFO, SUBSCRIBE, OPTIONS, BYE, CANCEL, NOTIFY, ACK"
SipClient: Receiving message...
SipClient: Received: 15:09:39.724
---------------------------------
SIP/2.0 478 Unresolveable destination (478/TM)
Via: SIP/2.0/UDP 139.153.254.196:5062
CSeq: 488 REGISTER
To: "Stephan"
<sip:srm@cs.stir.ac.uk>;tag=0a96755a1d32d0360b3e454593e5079b-9b73
From: "Stephan" <sip:srm@cs.stir.ac.uk>
Call-ID: 1902284369(a)139.153.254.196
Server: Sip EXpress router (0.8.10 (i386/linux))
Content-Length: 0
Warning: 392 139.153.254.196:5060 "Noisy feedback tells: pid=5138
req_src_ip=139.153.254.196 in_uri=sip:cs.stir.ac.uk
out_uri=sip:cs.stir.ac.uk via_cnt==1"
--- end kphone -----------------------------------------------------
ser does answer, the Replied locally counter in serctl moni reflects
this ok.
what is wrong?
do you need any other files?
In case you need more detail, where exactly is the server log??
by the way, I have tried this with auth turned on and off in ser.cfg.
and without persistence. always the same ...
thanks
S
--
Dr Stephan Reiff-Marganiec
Research Fellow
Department of Computing Science; University of Stirling
email: srm(a)cs.stir.ac.uk tel: 01786 46 7448
--
The University of Stirling is a university established in Scotland by
charter at Stirling, FK9 4LA. Privileged/Confidential Information may
be contained in this message. If you are not the addressee indicated
in this message (or responsible for delivery of the message to such
person), you may not disclose, copy or deliver this message to anyone
and any action taken or omitted to be taken in reliance on it, is
prohibited and may be unlawful. In such case, you should destroy this
message and kindly notify the sender by reply email. Please advise
immediately if you or your employer do not consent to Internet email
for messages of this kind. Opinions, conclusions and other
information in this message that do not relate to the official
business of the University of Stirling shall be understood as neither
given nor endorsed by it.
hi all,
i've downloaded the ser package from you and it is
working fine with msn.
but as u said i tried for authentication... it is not
working properly...
i've done -
a.uncommented the lines required for
authentication...
b.changed iptel.org to localhost in www_* (2
places)
c.created mysql tables
d.did'nt made any changes in mysql tables
e.tried to authenticate using admin/heslo and
signinname as admin@<myipaddress>
f.restarted SER :( again asking for username/pass
pl. give ur comments
thanks in advance..
best regards
sunil
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
I have a Linux box at home acting as a masquerading/NAT gateway for a few
Windows PCs, and have installed SER on there in order to use MS Messenger to
talk to people outside.
SER appears to be working in that I can get Messenger up on two PCs, connect
to SER and set up a voice connection between the two PCs. However, I cannot
connect to people offsite.
Relevant IPChains entries are
target prot opt source destination ports
ACCEPT udp ----l- anywhere anywhere any ->
5060
ACCEPT udp ------ anywhere anywhere any ->
7070:7080
I have made no changes to the default SIP configuration; it is working as
installed by the rpm package ser-0.8.10-1.i386.rpm. A browse through the
mailing list archive and through the admin guide doesn't show anything
obvious. No errors are reported to /etc/messages or /etc/syslog and serctl
moni does not show anything that looks relevant.
Does anyone have any suggestions?
--
Dr. Craig Graham, Software Engineer
Advanced Analysis and Integration Limited, UK. http://www.aail.co.uk/
Folks,
My nathelper module will need to tweak body of the messages, therefore
it will be third module after im and sms that needs body-related
functions. IMO it would probably make a lot of sense to move those
functions into core parser, so that modules will not have to import im
module just to use one or two utility functions.
Please let me know what do you think.
Thanks!
-Maxim