sr-users

sr-users@lists.kamailio.org

23 participants
37378 discussions

[Presence] Updating route information for SIP NOTIFY when re-SUBSCRIBE
by Denys Pozniak 26 Mar '24

26 Mar '24

Hello! In my architecture, SIP SUBSCRIBE messages can reach the Kamailio Presence server in several ways. And I noticed that re-SUBSCRIBEs messages do not update the record_route field in the active_watchers table (MySQL), so subsequent SIP NOTIFY messages do not inherit it and have the routes set of the initial SIP SUBSCRIBE message. Is there any way to change this behavior? modparam("presence", "db_url", DBURL) modparam("presence", "subs_db_mode", 3) modparam("presence", "timeout_rm_subs", 0) modparam("presence", "expires_offset", 0) modparam("presence", "max_expires", 1800) modparam("presence", "db_update_period", 30) modparam("presence", "clean_period", 180) modparam("presence", "send_fast_notify", 1) modparam("presence", "pres_htable_size", 32) modparam("presence", "subs_htable_size", 32) modparam("presence", "publ_cache", 0) modparam("presence", "notifier_processes", 0) # kamailio -v version: kamailio 5.1.2 (x86_64/linux) -- BR, Denys Pozniak

3 4

RFC: move app_lua_sr to kamailio-archive
by Victor Seva 26 Mar '24

26 Mar '24

Hi, I would like to move app_lua_sr to kamailio-archive but I would like to hear if anyone out there has a solid reason not to do it. Since we have app_lua as KEMI for a long time I think is time to retire the old remains of app_lua Cheers -- ----------------------------------------------------------------- | ,''`. Victor Seva | | : :' : linuxmaniac(a)torreviejawireless.org | | `. `' PGP: 8F19 CADC D42A 42D4 5563 730C 51A0 9B18 CF5A 5068 | | `- Debian Developer | -----------------------------------------------------------------

1 0

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

4 9

RTP Engine with Kamailio
by Vishal Pai 22 Mar '24

22 Mar '24

Hello Everyone. I am looking for documentation to have multiple RTP Engine servers connected with kamailio using db url and balance the load accordingly. Thanks

4 3

Kamailio to aid in seamless data center migration?
by Brad 21 Mar '24

21 Mar '24

I need to move a few dozen FreePBXen with some commercial modules running in individual VMs to a new data center. I’m trying to work out a plan to move the PBXes to the new data center in a way that will be transparent to the endpoints, or at the very least with the absolute minimum of downtime. Some of the installations are rather old, and there’s a handful of peculiarities on each, so the typical FreePBX backup/restore process hasn’t gone smoothly, at least in our tests. My current train of thought is to put a clone the VMs in the new data center and use Kamailio to route the SIP traffic to the new servers/IPs. I’ve never used it before, so I may be barking up the wrong tree, but it /appears/ to do what I’m suggesting. If so, I’m thinking I can install Kamailio on each VM, point it to the local asterisk/FreePBX initially, and clone the VM. Then, after the new instance is up and running, point Kamailio on the original VM to the cloned VM's asterisk, after which I can make appropriate DNS changes. Another option would be to stand up a single Kamailio server and redirect SIP traffic destined for individual asterisk servers to it at the router. Endpoints are mostly Yealink, and I’m not sure if they’ll feel the need to restart when the registration/SIP server’s IP changes, but a quick bounce when not in use isn’t the end of the world. I’d very much like to avoid having to send an update to each phone manually, but I can script a SIP NOTIFY if required. Anything stupid, wrong, ignorant, or just smelly about this tactic? Or, for that matter, any other suggestions?

2 1

RFC5626 Keep-Alive with CRLF
by Ihor Olkhovskyi 21 Mar '24

21 Mar '24

Hello, A bit generic question, does Kamailio supports CRLF keepalive per https://www.rfc-editor.org/rfc/rfc5626#section-4.4.1 ? It's more for tracking TCP connection states, as seems tcp_keepalive_enable is not super reliable especially in mobile networks. -- Best regards, Ihor (Igor)

3 5

Branch Route trigger for Withindialog calls?
by Benoit Panizzon 21 Mar '24

21 Mar '24

Hi List I am just wondering... When I am sending the initial INVITE to a customer CPE, this goes throug the whole location lookup and through a branch route in which I make some last adjustments to the headers, like removing header the customer shall not get (like P-Asserted-Identity which would reveal the caller identity on a callerid restricted call). On a Re-Invite (session timer refresh) the call is being routed by loose_route() and immediately sent to RELAY. uac_replace and uac_restore seem to work fine for stuff like To and From Header. But how do I prevent unwanted header to disclose information to the customer which should ne be disclosed? Do I need to re-arm the branch trigger also for within dialog calls? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 1

loose_route false when using topos? At which point in the call flow, does topos restore the Route header?
by Benoit Panizzon 21 Mar '24

21 Mar '24

Hi https://lists.kamailio.org/pipermail/sr-users/2020-July/109801.html I have the exact same issue. When the B side is starting a new transaction (UPDATE to refresh the session in my case) without topos enabled, that transaction contains one or multiple route header and a to_tag. Therefore loose_route() is true and the call is more or less sent to route(RELAY) immediately without further checks. If topos is enabled, all record-route header are removed and only one Via sent to the CPE. So when the CPE replies, there is no Route header. Therefore loose_route returns false. This makes me wonder, at which stage is topos restoring the route headers? Shouldn't that happen before loose_route is evaluated? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 4

No 408 generated by tm module on fr_timer when redis crashes
by Patrick Karton 21 Mar '24

21 Mar '24

1 0

Wrong documentation for module 'Userblacklist'
by Björn Klasen 20 Mar '24

20 Mar '24

Hi everybody, I'm a little bit confused about the documentation of the Userblacklist module as I think it has to be Userblocklist since version 5.x. Also some of the commands and some column names in the database have changed. I can remember that the documentation was right at some point, but the it has been changed back to Userblacklist. I wonder if nobody noticed that because the old commands do not work. BR, Björn -- Björn Klasen, Senior Specialist (VoIP) TNG Stadtnetz GmbH, TNG-Technik Gerhard-Fröhler-Straße 12 24106 Kiel・Deutschland T +49 431 7097-10 F +49 431 7097-555 bklasen(a)tng.de https://www.tng.de Executive board (Geschäftsführer): Dr. Sven Willert (CEO/Vorsitz), Gunnar Peter, Sven Schade, Carsten Tolkmit, Bernd Sontheimer Amtsgericht Kiel HRB 6002 KI USt-ID: DE225201428 Die Information über die Verarbeitung Ihrer Daten gemäß Artikel 12 DSGVO können Sie unter https://www.tng.de/datenschutz/ abrufen. ______________________________________________________________________

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users