sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

SIP-I trunking
by Jérôme Simionato 19 Jun '15

19 Jun '15

Hello, I'm planning to interconnect kamailio with a SIP-I provider (an i have no more information at this time from my telco). I read the documentation about the SIP-I module, who need to be completed to match our needs. basically, we need to read the location parameter for incoming call, and be able to set redirecting number for outgoing call Does anybody use this module for SIP-I ? Have you experiences of SIP-I trunking with telco ? And another question: when you make an ISUP (SS7) interconnection with a telco, you need to pass specific test to validate the correct implementation of the SS7 protocol (and it's national variant, eg. SPIROU in france). Is it the same thing on an SIP-I interconnection ? Any information about it will be appreciate, Cheers, Jérôme.

2 3

SIP Ping a device using Kamailio
by Nelson Migliaro 19 Jun '15

19 Jun '15

Hello, Is there a way to ping a device using Kamailio. In my scenario I need to access a Kamailio located in my DMZ over a firewall that is only open in LAN > DMZ direction. It is close in the other way round. In my current configuration I keep the link open using Asterisk qualify option in SIP. I would like to replace Astersik located in LAN with Kamailio thus I need to keep the link open. I know there is an option using dispatch but I would like to avoid using this module in order to keep it simple. Is there a "simple embedded function" in order to accomplish this. thank you

2 1

WARNING: tm [t_lookup.c:1537]: t_unref(): WARNING: script writer didn't release transaction
by Roberto Fichera 19 Jun '15

19 Jun '15

Hi All, I'm getting the warning in the subject after replacing a route() with a async_task_route(). In the called route() I'm doing some db query and send notify messages using the uac module. The async_task_route() is called once received a register message. Any idea what's is going on? Cheers, Roberto Fichera.

2 3

users with or without asterisk integration on the same kamailio database
by asterisk asterisk 19 Jun '15

19 Jun '15

I wish to know how I can have two kinds of users 1. some users with real time integration with asterisk 2. other users do not How can I achieve in the same kamailio instance?

3 3

Dispatcher and options_reply
by jay binks 19 Jun '15

19 Jun '15

Hello, So Im using dispatcher to poll SBC's behind my kamailio load balancer. What I need to do is get a count of how many "active" SBC's there are in the dispatcher module. ( how many SBC's are actively responding to their options ping ) so that I can then use this info when I reply to an OPTIONS on the load balancer. effectively , if there are no SBC's active, the LB needs to not reply to options. I COULD use ds_select_dst or something , but is that going to be overkill from a CPU perspective ? ( And I dont want ds_select_dst to do any modification to my otpions packets ) just wandering what everyone thinks the best way to achieve this would be. -- Sincerely Jay

2 1

siremis with postgres
by Tomas Zanet 19 Jun '15

19 Jun '15

Hi all, I need to install Kamailio, and Siremis as well, with Postgres backend. My current versions are the following: - Kamailio 4.2.1 - Siremis 4.2.0 - PHP 5.3.10-1ubuntu3.18 - postgres 9.1.3 To do so, I installed libpq-dev and compiled Kamailio with db_postgres module. After that, I create the Kamailio database using kamdbctl create No problems so far....while I’m facing some problem when I tried to install Siremis with Postgres. To do so, I installed php5-pgsql before and then I did the steps described here: http://kb.asipto.com/siremis:install42x:main#dokuwiki__top After clicking on “Setup Now” and “Next” buttons, I’m facing with the following problem: ERROR: SQLSTATE[08006] [7] FATAL: password authentication failed for user "www-data" FATAL: password authentication failed for user "www-data" Though the username I specified into web page is not www-data, but siremis. As far as I know www-data is a Debian user name under which Apache/PHP is running. Can anyone help me please? Thanks in advance Best Regards, Tomas Tomas Zanet Software Design Department tzanet(a)came.com CAME S.p.A.

2 4

kamcmd
by asterisk asterisk 18 Jun '15

18 Jun '15

I am compiling the kamailio 4.3 in raspberry Pi 2. It compiled and worked. However, kamcmd did not work as it looks for the file /var/run/kamailio/kamailio.ctl which is not present. Similar issue found for kamctl but I fixed it by change the /tmp directory to /var/run/kamailio Did I miss something?

2 1

404 Not found error when login Siremis-4.2.0
by Chathura Senanayake 18 Jun '15

18 Jun '15

Hello, I need a help with siremis-4.2.0. I have installed Kamailio-4.3 and have it running. Then I installed Siremis-4.2.0. When I try to login to the Siremis by using login name "admin" and password "admin", it shows a 404 Not found error message as follow. Not Found The requested URL /siremis/system/general_default was not found on this server. ------------------------------ *Apache/2.4.7 (Ubuntu) Server at 172.16.2.9 Port 80* I have run the #a2enmod > rewrite and Restart the apache2. But the problem is still not solved. Please let me know how to resolve this. *Chathura Senanayake* Associate Software Engineer (DA) hSenid Mobile Solutions *Head Office* (Singapore)*P*: +65 65 332 140*M*: *F*: +65 62 910 023 *R&D* (Sri Lanka)*P*: +94 11 268 3751*M*: +94 71 757 9646*F*: +94 11 268 3951 <http://www.hsenidmobile.com/> <http://www.hsenidmobile.com/> <https://www.facebook.com/hSenidMobileSolutions> <https://twitter.com/hSenidMobile> <http://www.linkedin.com/company/hsenid-mobile-solutions-pvt-ltd> <https://plus.google.com/u/0/116242841237814090103/posts> <http://www.youtube.com/user/hSenidmobile>*www.hSenidMobile.com* <http://www.hsenidmobile.com/>

3 7

Kamailio number of matches of specific character in a string
by Ali Taher 18 Jun '15

18 Jun '15

Hello, I just need to count the number of a specific character in a string. For example I want to count the number of "a" in the following string : "bbbaddaa34" I searched among transformations but didn't find such tool. Any help would be appreciated. Thanks Ali

2 1

using uac_replace_from( )
by Al S 18 Jun '15

18 Jun '15

Hi, I am trying to change only the "display name" of the FROM header using uac_replace_from().However, the value is not being changed (see below) request_route { .... xlog ("L_INFO", "fu=$fu"); uac_replace_from("pbx", ""); xlog ("L_INFO", "fu=$fu"); # authentication route(AUTH); ....} Am I missing anything? Any help in this regard would be greatly appreciated. Thanks,Al

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users