16 Nov
2005
16 Nov
'05
10:04 p.m.
Ok, that put the right things in place. However, here's a twist:
Either way, wit switching Sip-Translated-Request-URI and Called-Station-ID
around, or not, the CDRs are sent differently depending on who "hands up"
the call. For example, notice the User-Name, Calling-Station-ID and
Called-Station-ID:
User 1000 calls 15615551212, and user 1000 hangs up:
=====================================================
rad_recv: Accounting-Request packet from host 216.82.124.29:39228, id=206,
length=306
Acct-Status-Type = Start
Service-Type = Sip-Session
Acct-Terminate-Cause = 200
Error-Cause = Invite
User-Name = "1000(a)216.82.124.29"
Calling-Station-Id = "sip:1000@216.82.124.29"
Sip-Translated-Request-URI =
"sip:15617220966@216.82.124.29;user=phone"
Called-Station-Id =
"sip:949449852150#15617220966@216.82.124.30;user=phone"
Acct-Session-Id = "000d2890-d47f01f5-6410e8bd-4baf0435(a)66.232.8.116"
Sip-To-Tag = "33C5A3C-76A"
Sip-From-Tag = "000d2890d47f24f85e6c0b91-0092ab53"
Sip-CSeq = "102"
NAS-IP-Address = 216.82.124.29
NAS-Port = 5060
Acct-Delay-Time = 0
rlm_sql (sql): Reserving sql socket id: 15
rlm_sql (sql): Released sql socket id: 15
Sending Accounting-Response of id 206 to 216.82.124.29:39228
rad_recv: Accounting-Request packet from host 216.82.124.29:39228, id=207,
length=300
Acct-Status-Type = Stop
Service-Type = Sip-Session
Acct-Terminate-Cause = 200
Error-Cause = 8
User-Name = "1000(a)216.82.124.29"
Calling-Station-Id = "sip:1000@216.82.124.29"
Sip-Translated-Request-URI =
"sip:15617220966@216.82.124.29;user=phone"
Called-Station-Id =
"sip:949449852150#15617220966@216.82.124.30:5060"
Acct-Session-Id = "000d2890-d47f01f5-6410e8bd-4baf0435(a)66.232.8.116"
Sip-To-Tag = "33C5A3C-76A"
Sip-From-Tag = "000d2890d47f24f85e6c0b91-0092ab53"
Sip-CSeq = "103"
NAS-IP-Address = 216.82.124.29
NAS-Port = 5060
Acct-Delay-Time = 0
User 1000 calls 15615551212, and user 15615551212 hangs up:
===========================================================
rad_recv: Accounting-Request packet from host 216.82.124.29:39227, id=200,
length=306
Acct-Status-Type = Start
Service-Type = Sip-Session
Acct-Terminate-Cause = 200
Error-Cause = Invite
User-Name = "1000(a)216.82.124.29"
Calling-Station-Id = "sip:1000@216.82.124.29"
Sip-Translated-Request-URI =
"sip:15617220966@216.82.124.29;user=phone"
Called-Station-Id =
"sip:949449852150#15617220966@216.82.124.30;user=phone"
Acct-Session-Id = "000d2890-d47f01f4-372dff4b-793d4acc(a)66.232.8.116"
Sip-To-Tag = "33B37E4-77B"
Sip-From-Tag = "000d2890d47f24f639ccef77-4ef08b02"
Sip-CSeq = "102"
NAS-IP-Address = 216.82.124.29
NAS-Port = 5060
Acct-Delay-Time = 0
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
Sending Accounting-Response of id 200 to 216.82.124.29:39227
rad_recv: Accounting-Request packet from host 216.82.124.29:39227, id=201,
length=286
Acct-Status-Type = Stop
Service-Type = Sip-Session
Acct-Terminate-Cause = 200
Error-Cause = 8
User-Name = "15617220966(a)216.82.124.29"
Calling-Station-Id = "sip:15617220966@216.82.124.29;user=phone"
Sip-Translated-Request-URI = "sip:1000@216.82.124.29"
Called-Station-Id = "sip:1000@66.232.8.116:5061"
Acct-Session-Id = "000d2890-d47f01f4-372dff4b-793d4acc(a)66.232.8.116"
Sip-To-Tag = "000d2890d47f24f639ccef77-4ef08b02"
Sip-From-Tag = "33B37E4-77B"
Sip-CSeq = "101"
NAS-IP-Address = 216.82.124.29
NAS-Port = 5060
Acct-Delay-Time = 0
Shouldn't it always be that the User-Name attribute is the user who
initiated the call?
Lenir
-----Original Message-----
From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf
Of 'Jan Janak'
Sent: Wednesday, November 16, 2005 1:53 PM
To: lsantiago(a)globalgatewaycom.com
Cc: serdev(a)lists.iptel.org; serusers(a)lists.iptel.org; users(a)openser.org;
devel(a)openser.org
Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
Accounting
Either reconfigure the billing application to use
Sip-Translated-Request-URI (recommended) or change the ID of the
attribute in the radiusclient dictionary as suggested by Bogdan.
In this particular example you should set Called-Station-Id to 107.
Jan.
On 16-11-2005 13:09, 'Lenir' wrote:
my
id=97,
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Ok, so how do I tell acc.so to send
Sip-Translated-Request-URI as the
Called-Station-ID instead?
Lenir Santiago, Partner
Global Gateway Communications, Inc.
2500 Quantum Lakes Drive, Ste. 203
Boynton Beach, FL 33426
Office: 561-853-2213
Cell: 561-722-0966
Fax: 877-875-0060
http://www.globalgatewaycom.com
-----Original Message-----
From: 'Jan Janak' [mailto:jan@iptel.org]
Sent: Wednesday, November 16, 2005 11:29 AM
To: Bogdan-Andrei Iancu
Cc: Lenir; 'Lenir Santiago'; serdev(a)lists.iptel.org; serusers(a)lists.iptel.org;
devel(a)openser.org; users(a)openser.org
Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
Accounting
Why would you do something like this ? All the info that is needed is in
Sip-Translated-Ruquest-ID below. You can see it in the RADIUS dump:
Sip-Translated-Request-URI = "sip:949449852150#15615551212@gateway:5060"
Jan.
On 16-11-2005 16:50, Bogdan-Andrei Iancu wrote:
Hi Lenir,
you can keep the modified To value into an AVP and use the extra
accounting feature to log it. See
http://www.openser.org/docs/modules/1.1.x/acc.html#AEN115
and
http://www.openser.org/docs/modules/1.1.x/acc.html#AEN350
the problem is how to set it as Called-Station-ID attribute in order to
avoid overlapping. You can do a trick by playing with the radius
dictionary (on proxy side) :
changed the Called-Station-ID to a different ID attribute
set extra accounting with the original attribute ID of
Called-Station-ID
> in this way the acc will set de default TO as something else and you AVP as
Called-Station-ID ;)
regards,
bogdan
Lenir wrote:
>Well, if userA dials to:30, 30 gets translated to:15615551212 and SER
dials
> >15615551212, how can I make the acc.so module send the modified
> >to:15615551212 as the Called-Station-ID attribute?
> >
> >This is important for billing, specially if someone forwards to a long
> >distance or international long distance number.
> >
> >-----Original Message-----
> >From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
> >Behalf Of Jan Janak
> >Sent: Wednesday, November 16, 2005 3:15 AM
> >To: Lenir Santiago
> >Cc: serdev(a)lists.iptel.org; serusers(a)lists.iptel.org; users(a)openser.org;
> >devel(a)openser.org
> >Subject: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
> >
> >Hello,
> >
> >Called-Station-Id attribute always contains the To URI (not
> >Request-URI). You can find the outbound Request-URI in
> >Sip-Translated-Request-URI attribute.
> >
> >Even if you rewrite To header field, it will never be accounted in
> >Called-Station-Id.
> >
> > Jan.
> >
> >On 15-11-2005 21:59, Lenir Santiago wrote:
> >
> >
> >>Hey guys,
> >>
> >>
> >>
> >>I'm using Radius to do pretty much everything regarding my users, i.e.
> >>registrations, authorization, features and preferences. I implemented
>>
>>
>own
>
>
>>way of doing speeddial by using AVPs provided by radius and AVPOPs
module,
>>Here is the snippet:
>>
>>
>>
>>AVP-SIP = speedial:30:15615551212
>>
>>
>>
>> avp_subst("s:caller_speedial/i:99",
"/(.*):(.*)/\2/");
>>#15615551212
>>
>> avp_printf("i:98","$rU:*"); #30
>>
>> avp_printf("i:97","sip:$avp($temp2)@$td"); #
>>sip:15615551212@xx.xx.xx.xx
>>
>>
avp_printf("i:96","<sip:$avp($temp2)@$td>\r\n"); #
>><sip:15615551212@xx.xx.xx.xx>.
>>
>> xlog("L_N"," SPEEDIALING: $fU is speed-dialing
>>$hdr(To)->$avp($temp2)\n");
>>
>> if (avp_check("s:caller_speedial",
"fm/$temp1/g")) {
>>
>>
>>
>> #avp_pushto("$To","i:96");
>>
>> #avp_pushto("$ruri","i:97");
>>
>> #avp_pushto("$duri","i:97");
>>
>> #subst('/^To: (.*)(a)(.*)/To: "$avp($temp2)"
>><$avp($temp2)@\2/');
>>
>> #append_hf("To: \"5615551212\"
>><15615551212(a)xx.xx.xx.xx>;user=phone")user=phone");
>>
>>
>>#subst_uri('/^sip:(.*)@(.*)$/sip:$avp($temp2)@\2/i');
>>
>> #subst_user('/(.*)/$avp($temp2)/');
>>
>> #remove_hf("To");
>>
>> rewriteuser("15615551212");
>>
>> xlog("L_N"," SPEEDIALING: $fU is
dialing
>>
>>
>$hdr(To)
>
>
>>$avp($temp2)\n");
>>
>> avp_delete("$temp1/g");
>>
>> avp_delete("$temp2/g");
>>
>>
>>
>> };
>>
>>
>>
>>In this scenario, im forcing it instead of getting the value from AVPs
>>
>>
>just
>
>
>>for ease of showing my point. The problem that I'm having is that no
>>
>>
>matter
>
>
>>what I do to change the To header or change the R-URI, radius ALWAYS
sends
>>the accounting records with the original
R-URI, in my case
30(a)xx.xx.xx.xx,
> >>how can I get acc.so to send the final resulting URI
> >>(15615551212(a)xx.xx.xx.xx) in the Called-Station-Id AVP?
> >>
> >>
> >>
> >>
> >>
> >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
> >>length=298
> >>
> >> Acct-Status-Type = Start
> >>
> >> Service-Type = Sip-Session
> >>
> >> Acct-Terminate-Cause = 200
> >>
> >> Error-Cause = Invite
> >>
> >> User-Name = "1000(a)xx.xx.xx.xx"
> >>
> >> Calling-Station-Id = "sip:1000@xx.xx.xx.xx"
> >>
> >> Called-Station-Id = "sip:30@xx.xx.xx.xx;user=phone"
> >>
> >> Sip-Translated-Request-URI =
> >>"sip:949449852150#15615551212@gateway;user=phone"
> >>
> >> Acct-Session-Id =
> >>
> >>
> >"000d2890-d47f01e8-1dcc30bc-7a49c7a4(a)yy.yy.yy.yy"
> >
> >
> >> Sip-To-Tag = "230383F4-2AF"
> >>
> >> Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> >>
> >> Sip-CSeq = "102"
> >>
> >> NAS-IP-Address = xx.xx.xx.xx
> >>
> >> NAS-Port = 5060
> >>
> >> Acct-Delay-Time = 0
> >>
> >>rlm_sql (sql): Reserving sql socket id: 12
> >>
> >>rlm_sql (sql): Released sql socket id: 12
> >>
> >>Sending Accounting-Response of id 97 to xx.xx.xx.xx:39216
> >>
> >>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
id=98,
>>length=292
>>
>> Acct-Status-Type = Stop
>>
>> Service-Type = Sip-Session
>>
>> Acct-Terminate-Cause = 200
>>
>> Error-Cause = 8
>>
>> User-Name = "1000(a)xx.xx.xx.xx"
>>
>> Calling-Station-Id = "sip:1000@xx.xx.xx.xx"
>>
>> Called-Station-Id = "sip:30@xx.xx.xx.xx;user=phone"
>>
>> Sip-Translated-Request-URI =
>>"sip:949449852150#15615551212@gateway:5060"
>>
>> Acct-Session-Id =
>>
>>
>"000d2890-d47f01e8-1dcc30bc-7a49c7a4(a)yy.yy.yy.yy"
>
>
>> Sip-To-Tag = "230383F4-2AF"
>>
>> Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
>>
>> Sip-CSeq = "103"
>>
>> NAS-IP-Address = xx.xx.xx.xx
>>
>> NAS-Port = 5060
>>
>> Acct-Delay-Time = 0
>>
>>
>>
>>
>>
>>Thanks in advance!
>>
>>
>>
>>
>>
>>Lenir
>>_______________________________________________
>>Users mailing list
>>Users(a)openser.org
>>http://openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>>