8 Aug
2003
8 Aug
'03
4:46 a.m.
hi
i have installed ser with acc/mysql/radius module
while registering a user 'm getting the following error message
can somebody please point me as to what is wrong and where
rad_recv: Access-Request packet from host myhost:33532, id=69, length=294
Thread 3 assigned request 2
Waking up in 2 seconds...
Thread 3 handling request 2, (1 handled so far)
User-Name = "sip:test@myhost"
Digest-Attributes = "\n\034sip:test@myhost"
Digest-Attributes = "\001\023myhost"
Digest-Attributes = "\002*3f338410ec3d4e634e2883b85928416ef3c364e5"
Digest-Attributes = "\004\027sip:myhost"
Digest-Attributes = "\003\nREGISTER"
Digest-Attributes = "\005\006auth"
Digest-Attributes = "\t\n00000001"
Digest-Attributes = "\010"34555301336645129540719731434531"
Digest-Response = "acdd6400b4c16da2a04f85334d871415"
Service-Type = IAPP-Register
SIP-URI-User = "test"
NAS-IP-Address = 127.0.0.1
NAS-Port = 5060
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
FYI-
OS- RH 7.2
SER- latest from cvs with acc/mysql and radius
RADIUS- freeradius
------------------------------------ser.cfg---------------------------------
#
# $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
mhomed=yes
listen=myhost
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
modparam("usrloc", "db_mode", 1)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc", "log_level", 1)
modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic -------------------
# main routing logic
alias=myhost
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# if (loose_route()) {
# t_relay();
# break;
# };
#
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri=~"myhost") {
if (method=="REGISTER") {
log(1, "REGISTER: Authenticating user\n");
if (!radius_www_authorize("")) {
log(1, "REGISTER: challenging user\n");
www_challenge("", "1");
break;
};
save("location");
break;
};
if (method=="INVITE") {
log(1, "INVITE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
#};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
};
}
-------------------------------------------end----------------------------------------------------------
i dunno what is wrong here..if you need any other config files to help
me out please let me know
regards,
Madan