Re: [Serusers] fr_inv_timer problem when using SIPPS

Hi! I tried voicemail with redirect to the vm-proxy if the user doesn't pick up the phone after 10 seconds. It works fine if I call a kphone user, but not with SIPPS users. SIPPS sends a 180 Ringing every five seconds which probably resets the timer - if I choose timer intervalls shorter than 5 seconds it also works with SIPPS. Is this a bug? tried with ser: 0.8.12dev-t14 0.8.11rc1 0.8.11-r1 regards, Klaus ---------- # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias=obelix.ict.tuwien.ac.at # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # load the voicemail module #loadmodule "/usr/local/lib/ser/modules/vm.so" # load the enum module loadmodule "/usr/local/lib/ser/modules/enum.so" # load the group module, to verify if a user forwards to voicemail loadmodule "/usr/local/lib/ser/modules/group.so" # load the nathelper module #loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "sql://ser:ser2000@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "sql://ser:ser2000@localhost/ser") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- voicemail params -- #modparam("voicemail", "db_url","sql://ser:ser2000@localhost/ser") # -- voicemail params -- modparam("group", "db_url","sql://serro:serro2000@localhost/ser") # -- nathelper params -- #modparam("nathelper", "natping_interval", 10) modparam("tm", "fr_inv_timer", 8 ) modparam("tm", "fr_inv_timer", 8 ) # ------------------------- request routing logic ------------------- # main routing logic route{ lookup("aliases"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; #if (msg:len > max_len) { if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol #remove record route for dissipate #if (!(method=="REGISTER")) record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("obelix.ict.tuwien.ac.at", "subscriber")) { # www_challenge("obelix.ict.tuwien.ac.at", "0"); # break; # }; if (!save("location")) { sl_reply_error(); }; break; }; # check if number beginns with 00, then convert it into a + if (uri=~"^sip:00[0-9]*@") { # strip booth leading "0" strip(2); prefix("+"); }; # check if request uri begins with an internation phone number, if yes, try enum to resolve if (uri=~"sip:\+?[0-9]+@.*") { enum_query("voice"); }; #mark transaction for voicemail if (is_user_in("Request-URI", "voicemail")) { setflag(4); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; }; }; #add failure route which should be performed if response code >=300 if (method=="INVITE" && isflagset(4)) { t_on_failure("1"); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } route[4]{ # non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL" || method == "REFER" || method == "BYE")) { sl_send_reply("404", "Not Found"); break; }; # not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; }; # forward to voicemail now #rewritehostport("machtnix.ict.tuwien.ac.at:5060"); t_relay_to_udp("machtnix.ict.tuwien.ac.at", "5060"); #klaus #forward(machtnix.ict.tuwien.ac.at, 5060) } failure_route[1] { /* XX: note: unsafe if preloaded routes without username used */ revert_uri(); revert_uri(); #rewritehostport("machtnix.ict.tuwien.ac.at:5060"); append_branch(); t_relay_to_udp("machtnix.ict.tuwien.ac.at", "5060"); } _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers