17 Apr
2008
17 Apr
'08
10:07 a.m.
Hi again,
Sorry about the delay and thanks for your support. I did so, but it still
does not work. The fact is that the subscription to the XMPP user is sent
from the SIP user and reaches openser, which sends back a notify request
with no presence information at all. In between there is not exchange of
information with the XMPP either.
Then openser sends itself the couple of subscribe requests mentioned in my
later post (now both with sip:10.95.43.31 as contact header), the first of
which is rejected (due to the to-tag, I suppose), while the second one is
accepted. As a result of that request, a notify is sent towards itself, but
it is rejected with a 404 Not Here response. This one do carry some presence
information, but nothing interesting:
Content-Type: application/watcherinfo+xml
<?xml version="1.0"?>
<watcherinfo xmlns="urn:ietf:params:xml:ns:watcherinfo"
version="0"
state="full">
<watcher-list resource="sip:pge354*xmpp-domain@xmpp-gw"
package="presence"/>
</watcherinfo>
Let me know whether that behaviour is the expected one or not, and what the
reason could be for it not to work (see log attached).
Regards,
Pablo
-----Mensaje original-----
De: Anca Vamanu [mailto:anca@voice-system.ro]
Enviado el: viernes, 11 de abril de 2008 15:51
Para: Pablo Guijarro Enríquez
CC: users(a)lists.openser.org
Asunto: Re: [OpenSER-Users] Problems with SIMPLE-XMPP presence
Hi,
You need to add a host alias for 'xmpp-gw' on the machine running
openser. OpenSER does dns lookup to figure out if the destination is it,
and the R-URI has a special meaning in presence so it should be kept
with that key.
As for the contact, please change the parameter to 'sip:10.95.43.31 '
regards,
Anca
Pablo Guijarro Enríquez wrote:
Yes, you were right. Now errors have disappeared, but
still there is not
exchange of information between servers.
In the log there are a couple of things that I find strange. The first one
is that at some point openser tries to resolve xmpp-gw, which is only the
key to mark users from the xmpp domain.
The second is that, upon receiving the subscription from the client,
openser
first sends itself a subscription request, with the IP
address established
in the pua_xmpp server_address parameter as Contact header value, which is
answered with a 404 response, and then it sends the same request but
changing the Contact header to the URI sip:openser.domain:5060, which is
accepted with a 200 response (see both below). Is that OK? Or should I
change that parameter to the URI, despite the instructions given in the
module documentation?
SUBSCRIBE sip:pge*xmpp.domain@xmpp-gw SIP/2.0
Via: SIP/2.0/UDP 10.95.43.31;branch=z9hG4bKbca.c6e4c5f1.0
To: sip:pge*xmpp.domain@xmpp-gw;tag=10.12575.1207664296.3
From:
sip:pge*xmpp.domain@xmpp-gw;tag=533cb9e91f4b999cf76861cbb9ed54ed-2ab3
CSeq: 11 SUBSCRIBE
Call-ID: 77e00002-12580(a)10.95.43.31
Content-Length: 0
User-Agent: OpenSER (1.3.1-notls (i386/linux))
Max-Forwards: 70
Event: presence.winfo
Contact: <10.95.43.31>
Expires: 3610
SUBSCRIBE sip:pge*xmpp.domain@xmpp-gw SIP/2.0
Via: SIP/2.0/UDP 10.95.43.31;branch=z9hG4bKafa2.9020b137.0
To: sip:pge*xmpp.domain@xmpp-gw
From: sip:
pge*xmpp.domain@xmpp-gw;tag=533cb9e91f4b999cf76861cbb9ed54ed-5c38
CSeq: 10 SUBSCRIBE
Call-ID: 77e00001-12581(a)10.95.43.31
Content-Length: 0
User-Agent: OpenSER (1.3.1-notls (i386/linux))
Max-Forwards: 70
Event: presence.winfo
Contact: <sip:openser.domain:5060>
Expires: 3610
Thanks again,
Paul
-----Mensaje original-----
De: Anca Vamanu [mailto:anca@voice-system.ro]
Enviado el: martes, 08 de abril de 2008 16:07
Para: Pablo Guijarro Enríquez
CC: users(a)lists.openser.org
Asunto: Re: [OpenSER-Users] Problems with SIMPLE-XMPP presence
Try compiling the pua_xmpp module; it has some references in pua module
that I guess have been broken.
Anca
Pablo Guijarro Enríquez wrote:
status.
Thanks Anca,
I tried what you told me. The message about not sending subscribe is no
more
> shown, but some new errors appear and presence does not work yet.
>
> Regards,
> Paul
>
> -----Mensaje original-----
> De: Anca Vamanu [mailto:anca@voice-system.ro]
> Enviado el: martes, 08 de abril de 2008 14:30
> Para: Pablo Guijarro Enríquez
> CC: users(a)lists.openser.org
> Asunto: Re: [OpenSER-Users] Problems with SIMPLE-XMPP presence
>
> Hi Pablo,
>
> There was an optimization in pua version included in 1.3.1 release that
> sometimes prevented the presence sip-xmpp gateway from working ( related
> to the message "Found previous request for unlimited subscribe- do not
> send subscribe") from the log.
> This was removed in the svn version of the branch. I advise you to take
> the pua module from svn 1.3 branch.
>
> regards,
> Anca Vamanu
>
>
> Pablo Guijarro Enríquez wrote:
>
>
>> Hi everybody,
>>
>> I have some problems to get presence information exchanged between SIP
>> users and xmpp ones. SIP clients (X-Lite) depend on an openser server
>> v1.3.1, with all necessary modules working within it, and xmpp clients
>> (Psi) rely on an xmpp server (ejabberd) which is in the same machine.
>>
>> The link between both sip and xmpp servers is established when openser
>> starts, and the exchange of instant messages between sip and xmpp
>> users works fine. So does presence too, as long as there are only sip
>> users or only xmpp users involved, but it does not work between the
>> two worlds in any direction. Moreover, I do not see any packet being
>> exchanged between the sip and the xmpp servers when a user from one
>> domain subscribe to one from the other, or when they change their
I dont know what the problem can be. No errors appear in the log and
I thought adding xmpp presence to openser would be straightforward
once the IM was already working.
Openser config file and part of the log file (the subscription to an
xmpp user) are attached. Hope someone can give me some clue.
Thanks in advance!
Paul
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users