FW: [Serusers] SER/MediaProxy Audio issues - NEED HELP

I've changed allow & listen directives from none & none to what's

below. The one way audio problem still exists. Network Diagram: http://marc.ivalve.net/ser/gif_1.gif NGREP Capture: http://marc.ivalve.net/ser/ngrep1.txt SER.cfg http://marc.ivalve.net/ser/ser-cfg.txt Orig. mediaproxy.ini http://marc.ivalve.net/ser/mediaproxy-ini.txt I really appreciate the help guys. I'm dying to get this working. Marc Mediaproxy.ini --------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = 12.178.142.235:25060 allow = Any proxyIP = 12.178.142.235 portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: Monday, July 24, 2006 10:48 PM To: serusers(a)iptel.org Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Hi, What about allow and listen directives in mediaproxy.ini? I remember I had to specify all the directives, before my mediaproxy started functioning properly. Andrey. On 7/25/06, Marc Rys <m.rys(a)rystec.com> wrote: > > > > Hi Ali, > > > > Yes the ATA can register with no problems. Still one way audio. I also > setup a cisco 7960 phone behind NAT as well, and it's having the same

> way audio problem. > > > Thanks again. > > marc > > > ________________________________ > > > From: Ali Zaidi [mailto:aligzaidi@gmail.com] > Sent: Monday, July 24, 2006 7:50 PM > > To: Marc Rys > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > To: Marc Rys > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > > > > > Marc, > > > > > > you don't have to configure rtp on ATA since everything handled by > mediaproxy. You just have to makesure that your ATA can register, using > correct proxy server, port 5060, credentials, everything else set to > factory default. > > > > > > let meknow. > > > > > > Note: Set your ATA to factory default, try to register with SER using > username, password, domain and port 5060. EVERYTHING SHOULD BE FACTORY > DEFAULT. > > > > > > LET ME KNOW, > > > > > > ALI.... > > > > > > > > > On 7/24/06, Marc Rys <m.rys(a)rystec.com> wrote: > > > > I just tried all of that.. Still no luck. I even made sure the UA's

> using ports 10000 and higher. > > > > Any other suggestions? > > > marc > > > > > > > > ________________________________ > > > From: Ali Zaidi [mailto: aligzaidi(a)gmail.com] > Sent: Monday, July 24, 2006 4:56 PM > > > > To: Marc Rys > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > > > Marc, > > > > > > Ok, try restarting ser + MySQL + MediaProxy then reregister your both

is > said from "UA-2" on "UA-1", but not vice versa.2-way voice is not > happening. > > Both UA's do register to SER.The NAT'd UA couldn't register until I got > Mediaproxy installed.Mediaproxy does appear to start with out errors. > Below are my Ser.cfg and Mediaproxy.ini. > > Please Help. > > Marc > > > > Ser.cfg > -------------------------------------------------------------- > #5a-mysql-mediaproxy-ser.cfg > debug=3 > fork=yes > log_stderror=no > > listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE > port=5060 > children=4 > > dns=no > rev_dns=no > fifo="/tmp/ser_fifo" > fifo_db_url="mysql://ser:heslo@localhost/ser" > > > loadmodule "/usr/lib/ser/modules/mysql.so" > loadmodule "/usr/lib/ser/modules/sl.so" > loadmodule "/usr/lib/ser/modules/tm.so" > loadmodule "/usr/lib/ser/modules/rr.so" > loadmodule "/usr/lib/ser/modules/maxfwd.so" > loadmodule "/usr/lib/ser/modules/usrloc.so" > loadmodule "/usr/lib/ser/modules/registrar.so" > loadmodule "/usr/lib/ser/modules/auth.so" > loadmodule "/usr/lib/ser/modules/auth_db.so" > loadmodule "/usr/lib/ser/modules/uri.so" > loadmodule "/usr/lib/ser/modules/uri_db.so" > loadmodule "/usr/lib/ser/modules/domain.so" > loadmodule "/usr/lib/ser/modules/mediaproxy.so" > loadmodule "/usr/lib/ser/modules/nathelper.so" > loadmodule "/usr/lib/ser/modules/textops.so" > > modparam("auth_db|uri_db|usrloc", "db_url", > "mysql://ser:heslo@localhost/ser") > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > > modparam("nathelper", "rtpproxy_disable", 1) > modparam("nathelper", "natping_interval", 0) > > modparam("mediaproxy","natping_interval", 30) > modparam("mediaproxy","mediaproxy_socket", > "/var/run/mediaproxy.sock") > modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") > modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") > > modparam("usrloc", "db_mode", 2) > > modparam("registrar", "nat_flag", 6) > > modparam("rr", "enable_full_lr", 1) > > route { > > # > ------------------------------------------------------------------------ > # Sanity Check Section > # > ------------------------------------------------------------------------ > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483", "Too Many Hops"); > break; > }; > > if (msg:len > max_len) { > sl_send_reply("513", "Message Overflow"); > break; > }; > > # > ------------------------------------------------------------------------ > # Record Route Section > # > ------------------------------------------------------------------------ > > if (method=="INVITE" && client_nat_test("3")) { > # INSERT YOUR IP ADDRESS HERE > record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); > } else if (method!="REGISTER") { > record_route(); > }; > > # > ----------------------------------------------------------------- > # Call Tear Down Section > # > ----------------------------------------------------------------- > > if (method=="BYE" || method=="CANCEL") { > end_media_session(); > }; > > # > ------------------------------------------------------------------------ > # Loose Route Section > # > ------------------------------------------------------------------------ > > if (loose_route()) { > > if ((method=="INVITE" || method=="REFER") && !has_totag()) { > sl_send_reply("403", "Forbidden"); > break; > }; > > if (method=="INVITE") { > > if (!proxy_authorize("","subscriber")) { > proxy_challenge("","0"); > break; > } else if (!check_from()) { > sl_send_reply("403", "Use From=ID"); > break; > }; > > consume_credentials(); > > if (client_nat_test("3") || search("^Route:.*;nat=yes")) { > setflag(6); > use_media_proxy(); > > }; > }; > > route(1); > break; > }; > > # > ------------------------------------------------------------------------ > # Call Type Processing Section > # > ------------------------------------------------------------------------ > if (uri!=myself) { > route(4); > route(1); > break; > }; > > if (method=="ACK") { > route(1); > break; > } else if (method=="CANCEL") { > route(3); > break; > } else if (method=="INVITE") { > route(3); > break; > } else if (method=="REGISTER") { > route(2); > break; > }; > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > break; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > break; > }; > > route(1); > } > > route[1] { > # > ------------------------------------------------------------------------ > # Default Message Handler > # > ------------------------------------------------------------------------ > > t_on_reply("1"); > > if (!t_relay()) { > > if (method=="INVITE" || method=="ACK") { > end_media_session(); > }; > > sl_reply_error(); > }; > } > > route[2] { > # > ------------------------------------------------------------------------ > # REGISTER Message Handler > # > ------------------------------------------------------------------------ > > sl_send_reply("100", "Trying"); > > if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { > setflag(6); > fix_nated_register(); > force_rport(); > > }; > > if (!www_authorize("","subscriber")) { > www_challenge("","0"); > break; > }; > > if (!check_to()) { > sl_send_reply("401", "Unauthorized"); > break; > }; > > consume_credentials(); > > if (!save("location")) { > sl_reply_error(); > }; > > } > > route[3] { > > # > ----------------------------------------------------------------- > # INVITE Message Handler > # > ----------------------------------------------------------------- > > if (client_nat_test("3")) { > setflag(7); > force_rport(); > fix_nated_contact(); > }; > > if (!proxy_authorize("","subscriber")) { > proxy_challenge("","0"); > break; > } else if (!check_from()) { > sl_send_reply("403", "Use From=ID"); > break; > }; > > consume_credentials(); > > lookup("aliases"); > if (uri!=myself) { > route(4); > route(1); > break; > }; > > if (!lookup("location")) { > sl_send_reply("404", "User Not Found"); > break; > }; > > route(4); > route(1); > } > > route[4] { > > #----------------------------------------------------------------- > # NAT Traversal Section > # > ----------------------------------------------------------------- > if (isflagset(6) || isflagset(7)) { > if (isflagset(8)) { > setflag(8); > use_media_proxy(); > }; > }; > } > > onreply_route[1] { > > if ((isflagset(6) || isflagset(7)) && > (status=~"(180)|(183)|2[0-9][0-9]")) { > > if (!search("^Content-Length:[ ]*0")) { > use_media_proxy(); > }; > }; > > if (client_nat_test("1")) { > fix_nated_contact(); > }; > } > > > ------------------------------------------------------------ > > mediaproxy.ini > ------------------------------------------------------------ > > [Dispatcher] > ;start = yes > socket = /var/run/proxydispatcher.sock > ;group = ser > defaultProxy = /var/run/mediaproxy.sock > > [MediaProxy] > start = yes > socket = /var/run/mediaproxy.sock > group = ser > listen = None > allow = None > proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed > ;portRange = 2000:8000# These values are set same in ATA's configs > for RTP Range > TOS = 0xb8 > idleTimeout = 60 > holdTimeout = 180 > forceClose = 0 > accounting = off > > [Accounting] > user = root > password = > host = localhost > database = ser > table = acc > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

> > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date:

_______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers