20 Feb
2007
20 Feb
'07
6:20 p.m.
Klaus Darilion wrote:
Michel Bensoussan wrote:
As far as I understand B2BUA is
one to one. I need to handle several
call at a time.
"If the media goes directly from caller to
callee I wonder why you
need to know the bandwidth at all as the RTP packets may be out of
your network."
I need to write a CAC (Call Admission Control) module for an 802.11
AP (Access Point).
The idea is to use a SIP Proxy to monitoring bandwith utilization
according to codec, and allow or disallow new sessions, depending on
resources.
Do you need to know the bandwidth in advance (thus guessing the neede
bandwidth during call setup and eventually deny the call setup if the
required bandwidth can not be guaranteed) (a) or do you need to know
the exact current bandwidth need (b)?
In case of (a) I think you need a B2BUA in the AP.
In case of (b) you can parse the RTP sockets and then count the media
packets routed by the AP to calculate the bandwidth.
Or you can port mediaproxy to the accesspoint and use thus capabilities.
regards
klaus
Regards,
Michel.
Klaus Darilion wrote:
> Michel Bensoussan wrote:
>> Klaus Darilion wrote:
>>> Parsing the SDP does not give you the used codec as there may be
>>> several codecs in the SDP and you do not know which codec is used
>>> by the clients.
>> This is true for INVITE message but as I understand (but I'm not
>> familiar with SIP), in the OK message, we can determine which codec
>> is used. No?
>
> Not always. Often the 200 OK contains only one codec which will be
> used by both parties. But I think there may also be asynchronous
> codec (caller sends G711, callee sends G729).
>
>>> But for example you can use mediaproxy. Mediaproxy allows you to
>>> retrieve the status of all current calls (codecs, bandwidth, ...)
>> Well, the mediaproxy module needs an external proxy server. So it
>> seems to be too heavy for my needs.
>> The real time session statistics (from MediaProxy Server) will be
>> very useful but I'm not sure it's a good idea to use the server it
>> if I don't need the NAT traversal features.
>
> If the media goes directly from caller to callee I wonder why you
> need to know the bandwidth at all as the RTP packets may be out of
> your network.
>
> regards
> klaus
>
>>>
>>> regards
>>> klaus
>>>
>>> Michel Bensoussan wrote:
>>>> Hello
>>>> For each voice session I need to know the used codec (for
>>>> bandwith calculation). For that I need to parse the SIP message
>>>> body.
>>>> I didn't find in OpenSER such a functionality.
>>>> Is there a module that doing that?
>>>> Or maybe someone is working on it?
>>>> A suggestion for an open source?
>>>>
>>>> Thanks.
>>>>
>>>> Regards,
>>>> Michel.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)openser.org
>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>
>