RE: [Serusers] ACC into mysql

This particular config (I don't think?) won't log to a DB, additionally you need to setflag(1); somewhere in your config. We tried to set on "outbound" only originally and didn't have much luck so I set it near the top. To log to (my)sql you will additionally need to set another flag and setup similar mod params: modparam("acc", "db_url", "mysql://ser:serro@blah.mysql.haha/dbname") # Note flag 2, you will need to setflag(1); AND setflag(2); modparam("acc", "db_flag", 2) #Note this one logs all failed calls from the invite response, I find it useful modparam("acc", "failed_transactions", 1) # In your route config use something like the following # This is pretty much near the top, while ACC won't log reg's or INFO anyway, I just thought it'd be a little cleaner to have ... if (!method == "REGISTER" || !method == "INFO" ) { setflag(1); setflag(2); } ... # Doing the above ensure everything gets tagged including BYE's. A good reason why your BYE's may not get # tagged is possibly because record-route could be relaying the call before the flag gets set, just a thought.. -----Original Message----- From: Edgardo O. Gonzales II [mailto:edgardo.g@pacific.net.ph] Sent: Tuesday, April 26, 2005 1:29 AM To: Kofi Obiri-Yeboah Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] ACC into mysql Importance: High Thanks again for your help .. Here's my running ser.cfg Hope you can help me make my accounting work.. thanks, ed ================================================================ # ----------- global configuration parameters ------------------------ #debug=3 #fork=yes #log_stderror=no #debug=7 #fork=no #log_stderror=yes check_via=no dns=no rev_dns=no #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/ser/lib/ser/modules/mysql.so" loadmodule "/usr/local/ser/lib/ser/modules/sl.so" loadmodule "/usr/local/ser/lib/ser/modules/tm.so" loadmodule "/usr/local/ser/lib/ser/modules/rr.so" loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so" loadmodule "/usr/local/ser/lib/ser/modules/registrar.so" loadmodule "/usr/local/ser/lib/ser/modules/auth.so" loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so" loadmodule "/usr/local/ser/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 3) # ------------------------- request routing logic ------------------- alias=abc.com.ph # main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; record_route(); if (loose_route()) { t_relay(); break; }; if (uri=~"abc.com.ph") { if (method=="REGISTER") { if (!www_authorize("abc.com.ph", "subscriber")) { www_challenge("abc.com.ph", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } ================================================================ At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote: I am assuming your question is if the record_route() function is a parameter for accounting? If that was your question then the answer is no. Generally you invoke record_route() to ensure acl acceptance on a gateway (i.e. all calls through that gateway) -----Original Message----- From: Edgardo O. Gonzales II [ mailto:edgardo.g@pacific.net.ph <mailto:edgardo.g@pacific.net.ph> ] Sent: Monday, April 25, 2005 6:22 PM To: Kofi Obiri-Yeboah Cc: serusers(a)lists.iptel.org Subject: RE: [Serusers] ACC into mysql Hi Kofi! got it.. thanks for immediate feedback .. however my accounting is not working. any parameters to be added to make it work.. I have the following info already on my ser.cfg modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 3) record_route(); -> its this a parameter for accounting thanks, ed At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote: I think the correct modparam statement should read as follows: modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") please note that "my" is required in front of sql and not: modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") -----Original Message----- From: serusers-bounces(a)lists.iptel.org [ mailto:serusers-bounces@lists.iptel.org]On <mailto:serusers-bounces@lists.iptel.org%5DOn> Behalf Of Edgardo O. Gonzales II Sent: Monday, April 25, 2005 5:20 PM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] ACC into mysql Hi all! Im also receiving this error message. Can somebody help us on how to make accounting work using mysql. thanks, ed At 06:01 AM 4/26/2005, Leon Sun wrote: Hi, I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql followed instruction from manual. I found, first, modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad config file (1 errors) If I disabled it, SER worked fine but I couldnt see any record in acc table. Would anyone suggest how to put call records into Mysql? Thank you. # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- #modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc","log_level",1) modparam("acc","log_flag",1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { if (method=="BYE") { setflag(1); setflag(2); } t_relay(); break; }; #labeled all transaction for accounting setflag(1); setflag(2); if (method=="CANCEL"){ t_relay(); }; # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { # This for PSTN destination if (uri=~"^sip:1") { rewritehost("10.10.10.10"); forward(10.10.10.10,5060); break; } if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.mycommunications.com", "subscriber")) { www_challenge("sip.mycommunications.com", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers