Thanks Ben1

that did not make it! 
Just to be clear, there is no UAS scenario for SIPp running. The call is generated by SIPp scenario, in "UAC mode", to Kamailio and Kamailio will reply back to the originating SIPp instance with a 300 Multiple Choices message. Setting the "rrs" attribute in the "recv" element doesn't work.
As for next_url, it did not help either....

Sérgio Charrua


On Mon, May 6, 2024 at 3:46 PM Ben Kaufman <bkaufman@bcmone.com> wrote:

SIPp’s syntax for handling record route and setting ACK request lines correctly kinda sucks.

 

 

Try setting `rrs` in your `recv` element (https://sipp.readthedocs.io/en/latest/scenarios/ownscenarios.html?highlight=rrs#list-of-commands-with-their-attributes), and then use `next_url` as the contact in your ACK:  (https://sipp.readthedocs.io/en/latest/scenarios/keywords.html#next-url)

 

 

Kaufman

 

 

From: Sergio Charrua via sr-users <sr-users@lists.kamailio.org>
Sent: Monday, May 6, 2024 6:57 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Cc: Sergio Charrua <sergio.charrua@voip.pt>
Subject: [SR-Users] Retransmission behaviour after ACK

 

CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

 

Hi all!

 

I'm testing some redirect scenarios with Kamailio 5.7.4 and using Astterisk 13 and SIPp for unit testing.

 

The kamailio's script is simple and uses TM, HTTP_ASYNC_MODULE, JSONRPC, JANSSON, RTJSON and XLog modules.

 

Request route is simple:

request_route {

 

  route(HANDLE_OPTIONS);

  route(HANDLE_RETRANS);

  route(HANDLE_CANCEL);

  route(REQINIT);

  route(HANDLE_INVITE);

 

}

 

where HANDLE_RETRANS is:

 

route[HANDLE_RETRANS]{

        # handle retransmissions

        xlog("L_INFO","HANDLE_RETRANS - message type is $mt for method $rm");

        if (!is_method("ACK")) {

                if(t_precheck_trans()) {

                        xlog("L_INFO","HANDLE_RETRANS - Precheck Trans");

                        t_check_trans();

                        xlog("L_INFO", "HANDLE_RETRANS - Exiting after Retransmission check - method $rm");

                        exit;

                }

                xlog("L_INFO","HANDLE_RETRANS - Check Trans");

                t_check_trans();

        }

}

 

 

and HANDLE INVITE is:

 

route[HANDLE_INVITE]{

        if (is_method("INVITE"))

        {

                xlog("L_INFO","MAIN - calling TO_CARRIER");

                setflag(FLT_ACC);              

                route(TO_CARRIER);

                exit;

        }

}

 

The HTTP requests call a REST API returning a JSON object, that is iterated and produces a CONTACT header containing multiple choices using the append_branch() command.

The RELAY route is :

 

route[RELAY] {

  # Sends a 300 Multiple Choices back to the proxy that requested the routing lookup

  xlog("L_INFO","REPLY_302 - send reply");

  send_reply("300", "Multiple Choices");

  xlog("L_INFO","REPLY_302 - exit");

  exit;

}

 

Which returns indeed a Contact header with multiple contact choices.

 

When using Asterisk to originate a call to Kamailio, the SIP call flow is as follows and terminates (SNGrep and TCPDump do not detect anything else):

 

SRC                                         DST

        INVITE (SDP)         

 ──────────────────────────> 

  100 trying -- your call is 

 <────────────────────────── 

    300 Multiple Choices     

 <────────────────────────── 

             ACK             

 ──────────────────────────> 

 

However when using SIPp I get some retransmissions after the final ACK. 

SRC                                         DST

        INVITE (SDP)         

 ──────────────────────────> 

  100 trying -- your call is 

 <────────────────────────── 

    300 Multiple Choices     

 <────────────────────────── 

             ACK             

 ──────────────────────────> 

    300 Multiple Choices     

 <<<──────────────────────── 

    300 Multiple Choices     

 <<<──────────────────────── 

    300 Multiple Choices     

 <<<──────────────────────── 

 

SIPp scenario is : 

<?xml version="1.0" encoding="ISO-8859-1" ?>

<!DOCTYPE scenario SYSTEM "sipp.dtd">

 

<scenario name="Basic Sipstone UAC">

<!--  In client mode (sipp placing calls), the Call-ID MUST be          -->

<!--  generated by sipp. To do so, use [call_id] keyword.                 -->

<send retrans="500" start_rtd="true" rrs="true">

<![CDATA[

Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]

Max-Forwards: 70

From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[call_number]

Call-ID: [call_id]

CSeq: 102 INVITE

User-Agent: SIPp

Supported: replaces, timer

Content-Type: application/sdp

Subject: Performance Test

Session-Expires: 3600;refresher=uas

Content-Length: [len]

 

v=0

o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]

s=SIPp

c=IN IP[media_ip_type] [media_ip]

t=0 0

m=audio [media_port] RTP/AVP 0

a=rtpmap:0 PCMU/8000

]]>

</send>

<recv response="100" rss="true"> </recv>

 

<recv response="300" rtd="true" rss="true">

    <action>

      <ereg regexp="\&lt;([a-zA-Z0-9@.=;]+)[^&gt;]+"

            search_in="hdr"

            header="Contact: "

            assign_to="1"/>

      <log message="INFO: 300 Contact Header: [$1]" />

      <exec command="echo [$1] >> ./300_ContactHeader.txt" />

    </action>

    <action>

      <ereg regexp="sip:.*@([0-9A-Za-z\.]+):([0-9]+);transport=([A-Z]+)" search_in="hdr" header="Contact:" check_it="true" assign_to="dummy,host,port,transport" />

    </action>

</recv>

 

<!-- Reference variables="dummy" /-->

 

  <!-- Send ACK for 180 Ringing

<send rrs="true">

<![CDATA[

Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]

Max-Forwards: 70

From: <sip:sipp@[local_ip]:[local_port]>;tag=[call_number]

Call-ID: [call_id]

CSeq: 102 ACK

User-Agent: SIPp

Content-Length: 0

]]>

</send>

 

<!--  definition of the response time repartition table (unit is ms)    -->

<!-- ResponseTimeRepartition value="10, 50, 100, 150, 200, 500, 1000"/ -->

</scenario>

 

 

 

The question is : is there anything wrong with my kamailio script? or with SIPp scenario? why does kamailio have different behaviours between Asterisk and SIPp? 

Any option to disable retransmissions on Kamailio ? (using UDP)

 

Thanks in advance,


Sérgio Charrua