hello. how can i block SIP messages by message content type. for exlamle : text/plain tanks in advance! ________________________________ From: sr-users [sr-users-bounces@lists.sip-router.org] on behalf of TEG AMJG [tegamjg@gmail.com] Sent: Tuesday, April 05, 2016 1:35 AM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] dispatcher [dispatch.c:1416]: ds_load_remove(): cannot find load for (from asterisk call-id)
Hi Alberto, thanks for your reply
yeah, i am using ds_select_dst("0","10") in this case because i use setid=0 in the dispatcher table as you can see in this route block
route[TOASTERISK] { #!ifdef WITH_LOADBALANCE xlog("L_INFO","UBICAR: Forwarding non-registrar requests to Asterisk \n"); if(!ds_select_dst("0", "10")) { sl_send_reply("500", "Service Unavailable"); xlog("L_ERROR","UBICAR: No destinations available for $rd \n"); exit; } xlog("L_ERROR","UBICAR: AVP $avp(dsdstid)\n"); xlog("L_INFO","UBICAR: Dispatching to Asterisk Box $du\n"); t_set_fr(0,10000); t_on_failure("MANAGE_FAILURE"); route(RELAY); exit; #!endif }
Also both Asterisk are responding to ping probes done by Kamailio, they are actually responding 404 but are still kept alive thanks to this param:
modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=480;code=404")
and the command kamctl dispatcher dump shows them with flags=AP
URI:: sip:192.168.10.191:5060http://192.168.10.191:5060 flags=AP priority=0 attrs=duid=PBX2;my=pbx2;maxload=200 URI:: sip:192.168.10.190:5060http://192.168.10.190:5060 flags=AP priority=0 attrs=duid=PBX1;my=pbx1;maxload=200
Also, i would like to know if there is a way to print some kind of table to see how kamailio are keeping these call loads recorded. I have been looking for it but i cannot find any way of doing it
Again, thank you very much for your reply
2016-04-04 14:23 GMT-03:00 Alberto Sagredo <alberto.sagredo@avanzada7.commailto:alberto.sagredo@avanzada7.com>: Hi
Are you using ds_select_dst("1", "10"); somewhere ?
You have to check Asterisk is responding to OPTIONS as dispatcher considered UP when 200 OK from Asterisk or SIP Gateway is received.. and not if not received.
I have used dispatcher but not with 10 option on algo...
BR
2016-04-04 8:07 GMT+02:00 TEG AMJG <tegamjg@gmail.commailto:tegamjg@gmail.com>: Hi
I am new to Kamailio and i am just trying to setup a kamailio (v4.2.3) dispatcher to distribute calls to 2 asterisk using the call load distribution algorithm (alg 10). I started to test and see how all it is working and in the logs appears that the call load record it cannot be found.
- ERROR: dispatcher [dispatch.c:1416]: ds_load_remove(): cannot find load for (call id generated by asterisk)
I am getting this error trying a 2 call leg conversation when asterisk is creating the BYE message destinated to the callee after receiving a BYE message from the caller, and the BYE message by Asterisk reach Kamailio to then apply the ds_load_update function
From what i understand about ds_load_update it is that it sets the load to an specific destination if Kamailio receives a 2xx reply of an INVITE message, and removes it if Kamailio receives a BYE message based from the Call-id received in that message, where it is actually failing in my implementation at the moment
Here are the blocks of code of the dispatcher parameters and where the function ds_load_update() is being used: #!ifdef WITH_LOADBALANCE
#Parameters using Dispatcher from DB # ---------- modparam("dispatcher", "db_url", DBURL) modparam("dispatcher", "table_name", "dispatcher") # ----------
#Enabling failover mechanism # ----------- modparam("dispatcher", "flags", 2) # -----------
#Setting dispatcher parameters in AVP # ----------- modparam("dispatcher", "dst_avp", "$avp(AVP_DST)") modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)") modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)") modparam("dispatcher", "dstid_avp", "$avp(dsdstid)") # -----------
#Setting dispatcher result in PV variables # ----------- modparam("dispatcher", "attrs_pvname", "$var(attrs)") # -----------
#Enabling dispatcher algorithm according to call loads # ----------- modparam("dispatcher", "ds_hash_size",8) modparam("dispatcher", "ds_hash_expire", 3600) modparam("dispatcher", "ds_hash_initexpire", 60) # -----------
# Setting parameters for probing dispatcher destinations # ----------- modparam("dispatcher", "ds_ping_interval", 20) modparam("dispatcher", "ds_ping_from", "sip:kamailio1@<Kamailio IP>") modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_probing_threshhold", 2) modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=480;code=404") # -----------
... route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing
#!ifdef WITH_LOADBALANCE if(is_method("BYE|CANCEL")){ xlog("L_ERROR","UBICAR BYE ds_load_update requesturi=$ru from=$fu method=$rm callid=$ci to=$tu reply=$mt rrcode=$rr rcode=$rs\n"); ds_load_update(); } #!endif ... }
...
onreply_route[MANAGE_REPLY] { #!ifdef WITH_LOADBALANCE if(is_method("INVITE")) { if(status=~"2[0-9][0-9]") { xlog("L_ERROR","UBICAR setting ds_load_update requesturi=$ru from=$fu method=$rm callid=$ci to=$tu reply=$mt rrcode=$rr rcode=$rs"); ds_load_update(); }else if(status=~"[3-7][0-9][0-9]") { ds_load_unset(); } } #!endif
if(status=~"[12][0-9][0-9]"){ route(NATMANAGE); } }
This is what i am getting from logs after the 2 call legs conversation completes:
kam1 /usr/sbin/kamailio[4082]: ERROR: <script>: UBICAR: FROMASTERISK 70175143146f92975a5bff8876435911@192.168.10.194mailto:70175143146f92975a5bff8876435911@192.168.10.194
kam1 /usr/sbin/kamailio[4082]: ERROR: <script>: UBICAR setting ds_load_update requesturi=<null> from=sip:103@192.168.10.194mailto:sip%3A103@192.168.10.194 method=INVITE callid=28d0f6e71625c9e87baec07f46167863@192.168.10.194mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194 to=sip:104@192.168.10.194mailto:sip%3A104@192.168.10.194 reply=2 rrcode=OK rcode=200
kam1 /usr/sbin/kamailio[4083]: ERROR: <script>: UBICAR setting ds_load_update requesturi=<null> from=sip:103@192.168.10.194:5060http://sip:103@192.168.10.194:5060 method=INVITE callid=1-3692@192.168.20.2mailto:1-3692@192.168.20.2 to=sip:104@192.168.10.194:5060http://sip:104@192.168.10.194:5060 reply=2 rrcode=OK rcode=200
kam1 /usr/sbin/kamailio[4084]: ERROR: <script>: UBICAR BYE ds_load_update requesturi=sip:104@192.168.10.190:5060http://sip:104@192.168.10.190:5060 from=sip:103@192.168.30.1:5060http://sip:103@192.168.30.1:5060 method=BYE callid=1-3692@192.168.20.2mailto:1-3692@192.168.20.2 to=sip:104@192.168.30.1:5060http://sip:104@192.168.30.1:5060 reply=1 rrcode=<null> rcode=<null>
kam1 /usr/sbin/kamailio[4085]: ERROR: <script>: UBICAR BYE ds_load_update requesturi=sip:104@192.168.30.2:22523;transport=UDP from=sip:103@192.168.10.194mailto:sip%3A103@192.168.10.194 method=BYE callid=28d0f6e71625c9e87baec07f46167863@192.168.10.194mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194 to=sip:104@192.168.10.194mailto:sip%3A104@192.168.10.194 reply=1 rrcode=<null> rcode=<null>
kam1 /usr/sbin/kamailio[4085]: ERROR: dispatcher [dispatch.c:1416]: ds_load_remove(): cannot find load for (28d0f6e71625c9e87baec07f46167863@192.168.10.194mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194)
Kamailio IP: 192.168.10.194
Asterisk IP:
+----+-------+-------------------------+-------+----------+-------------------------------+-------------+ | id | setid | destination | flags | priority | attrs | description | +----+-------+-------------------------+-------+----------+-------------------------------+-------------+ | 1 | 0 | sip:192.168.10.190:5060http://192.168.10.190:5060 | 2 | 0 | duid=PBX1;my=pbx1;maxload=200 | pbx1 | | 2 | 0 | sip:192.168.10.191:5060http://192.168.10.191:5060 | 2 | 0 | duid=PBX2;my=pbx2;maxload=200 | pbx2 | +----+-------+-------------------------+-------+----------+-------------------------------+-------------+
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- - Saludos a todos ________________________________ [gh.ge] ვლადიმერ გაბუნია IT სამსახურის უფროსი ტელ: (+995) 32 2505222 +8183 მობ: (995) 577 095333 შპს "ჯეო ჰოსპიტალს" სათავო ოფისი თბილისი 0160, ვაჟა-ფშაველას გამზ. № 16; http://www.gh.ge http://gh.ge