root@ubuntutest:/kamailio# kamctl fifo which
500
command 'which' not available
root@ubuntutest:/kamailio#
From: Daniel-Constantin Mierla
[mailto:miconda@gmail.com]
Sent: Tuesday, January 26, 2010 2:55 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0
On 1/26/10 12:35 PM, Denis Putyato wrote:
I do not use lcr routing in config (only gw table is used).
ok
Not in kamailio 1.5 nor 3.0. I use carrierroute (in 1.5) and now
drouting (in 3.0).
By the way. Recently you helped me with drouting. Can I ask one
more question about this module?
When I try to do “kamctl fifo dr_reload” I receive
“500 command 'dr_reload' not available”.
do:
kamctl fifo which
Should list available MI commands, is dr_reload there?
Cheers,
Daniel
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Tuesday, January 26, 2010 12:43 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0
On 1/26/10 10:38 AM, Denis Putyato wrote:
Daniel thank you. Now it’s working
welcome! Be sure you understand the idea behind the instances. Not being a user
of lcr don't know exactly the internal architecture, so as I understood from
discussions on mailing lists, you can have more lcr instance on same kamailio
grouped under same value of lcr_id (many gws and lcr rules with same lcr_id).
Cheers,
Daniel
From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: Tuesday, January 26, 2010 12:31 PM
To: Denis Putyato
Cc: users@lists.kamailio.org
Subject: Re: [Kamailio-Users] LCR module in Kamailio 3.0
Hello,
On 1/26/10 7:33 AM, Denis Putyato wrote:
Hello everybody!
I have a such problem with LCR module
When I add a new gw in gw table via kamctl
addgw or direct via mysql command, never mind, after doing lcr reload, in
memory loaded only gw with lcr_id = 1.
All other gateways, with lcr_id > 1,
not loaded into memory, so I cannot use them.
(After lcr reload I do lcr dump and only
gateways whis lcr_id = 1 can be seen)
Thank you for any help.
P.S. lcr table, where lcr_id is present
too, is empty. It does not need for processing in my kamailio. Only gw table is
used.
Kamailio 3.0 was installed from GIT.
maybe
is related to lcr_count parameter:
http://kamailio.org/docs/modules/3.0.x/modules/lcr.html#id2495949
AFAIK, there were some changes in lcr by adding instances, which are hold in
lcr_id (gws to same instance have same id).
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
--
Daniel-Constantin Mierla
* http://www.asipto.com/